1 // SPDX-License-Identifier: GPL-2.0-or-later
5 * Linux architectural port borrowing liberally from similar works of
6 * others. All original copyrights apply as per the original source
9 * Modifications for the OpenRISC architecture:
14 #include <linux/sched.h>
16 #include <linux/smp.h>
17 #include <linux/kernel.h>
18 #include <linux/signal.h>
19 #include <linux/errno.h>
20 #include <linux/wait.h>
21 #include <linux/ptrace.h>
22 #include <linux/unistd.h>
23 #include <linux/stddef.h>
24 #include <linux/resume_user_mode.h>
26 #include <asm/processor.h>
27 #include <asm/syscall.h>
28 #include <asm/ucontext.h>
29 #include <linux/uaccess.h>
34 unsigned char retcode[16]; /* trampoline code */
37 asmlinkage long _sys_rt_sigreturn(struct pt_regs *regs);
39 asmlinkage int do_work_pending(struct pt_regs *regs, unsigned int thread_flags,
42 static int restore_sigcontext(struct pt_regs *regs,
43 struct sigcontext __user *sc)
47 /* Always make any pending restarted system calls return -EINTR */
48 current->restart_block.fn = do_no_restart_syscall;
51 * Restore the regs from &sc->regs.
52 * (sc is already checked since the sigframe was
53 * checked in sys_sigreturn previously)
55 err |= __copy_from_user(regs, sc->regs.gpr, 32 * sizeof(unsigned long));
56 err |= __copy_from_user(®s->pc, &sc->regs.pc, sizeof(unsigned long));
57 err |= __copy_from_user(®s->sr, &sc->regs.sr, sizeof(unsigned long));
58 err |= __copy_from_user(®s->fpcsr, &sc->fpcsr, sizeof(unsigned long));
60 /* make sure the SM-bit is cleared so user-mode cannot fool us */
61 regs->sr &= ~SPR_SR_SM;
63 regs->orig_gpr11 = -1; /* Avoid syscall restart checks */
65 /* TODO: the other ports use regs->orig_XX to disable syscall checks
66 * after this completes, but we don't use that mechanism. maybe we can
73 asmlinkage long _sys_rt_sigreturn(struct pt_regs *regs)
75 struct rt_sigframe __user *frame = (struct rt_sigframe __user *)regs->sp;
79 * Since we stacked the signal on a dword boundary,
80 * then frame should be dword aligned here. If it's
81 * not, then the user is trying to mess with us.
83 if (((unsigned long)frame) & 3)
86 if (!access_ok(frame, sizeof(*frame)))
88 if (__copy_from_user(&set, &frame->uc.uc_sigmask, sizeof(set)))
91 set_current_blocked(&set);
93 if (restore_sigcontext(regs, &frame->uc.uc_mcontext))
96 if (restore_altstack(&frame->uc.uc_stack))
107 * Set up a signal frame.
110 static int setup_sigcontext(struct pt_regs *regs, struct sigcontext __user *sc)
115 /* There should be no need to save callee-saved registers here...
116 * ...but we save them anyway. Revisit this
118 err |= __copy_to_user(sc->regs.gpr, regs, 32 * sizeof(unsigned long));
119 err |= __copy_to_user(&sc->regs.pc, ®s->pc, sizeof(unsigned long));
120 err |= __copy_to_user(&sc->regs.sr, ®s->sr, sizeof(unsigned long));
121 err |= __copy_to_user(&sc->fpcsr, ®s->fpcsr, sizeof(unsigned long));
126 static inline unsigned long align_sigframe(unsigned long sp)
132 * Work out where the signal frame should go. It's either on the user stack
133 * or the alternate stack.
136 static inline void __user *get_sigframe(struct ksignal *ksig,
137 struct pt_regs *regs, size_t frame_size)
139 unsigned long sp = regs->sp;
142 sp -= STACK_FRAME_OVERHEAD;
143 sp = sigsp(sp, ksig);
144 sp = align_sigframe(sp - frame_size);
146 return (void __user *)sp;
149 /* grab and setup a signal frame.
151 * basically we stack a lot of state info, and arrange for the
152 * user-mode program to return to the kernel using either a
153 * trampoline which performs the syscall sigreturn, or a provided
154 * user-mode trampoline.
156 static int setup_rt_frame(struct ksignal *ksig, sigset_t *set,
157 struct pt_regs *regs)
159 struct rt_sigframe __user *frame;
160 unsigned long return_ip;
163 frame = get_sigframe(ksig, regs, sizeof(*frame));
165 if (!access_ok(frame, sizeof(*frame)))
168 /* Create siginfo. */
169 if (ksig->ka.sa.sa_flags & SA_SIGINFO)
170 err |= copy_siginfo_to_user(&frame->info, &ksig->info);
172 /* Create the ucontext. */
173 err |= __put_user(0, &frame->uc.uc_flags);
174 err |= __put_user(NULL, &frame->uc.uc_link);
175 err |= __save_altstack(&frame->uc.uc_stack, regs->sp);
176 err |= setup_sigcontext(regs, &frame->uc.uc_mcontext);
178 err |= __copy_to_user(&frame->uc.uc_sigmask, set, sizeof(*set));
183 /* trampoline - the desired return ip is the retcode itself */
184 return_ip = (unsigned long)&frame->retcode;
186 l.ori r11,r0,__NR_sigreturn
189 err |= __put_user(0xa960, (short __user *)(frame->retcode + 0));
190 err |= __put_user(__NR_rt_sigreturn, (short __user *)(frame->retcode + 2));
191 err |= __put_user(0x20000001, (unsigned long __user *)(frame->retcode + 4));
192 err |= __put_user(0x15000000, (unsigned long __user *)(frame->retcode + 8));
197 /* Set up registers for signal handler */
198 regs->pc = (unsigned long)ksig->ka.sa.sa_handler; /* what we enter NOW */
199 regs->gpr[9] = (unsigned long)return_ip; /* what we enter LATER */
200 regs->gpr[3] = (unsigned long)ksig->sig; /* arg 1: signo */
201 regs->gpr[4] = (unsigned long)&frame->info; /* arg 2: (siginfo_t*) */
202 regs->gpr[5] = (unsigned long)&frame->uc; /* arg 3: ucontext */
204 /* actually move the usp to reflect the stacked frame */
205 regs->sp = (unsigned long)frame;
211 handle_signal(struct ksignal *ksig, struct pt_regs *regs)
215 ret = setup_rt_frame(ksig, sigmask_to_save(), regs);
217 signal_setup_done(ret, ksig, test_thread_flag(TIF_SINGLESTEP));
221 * Note that 'init' is a special process: it doesn't get signals it doesn't
222 * want to handle. Thus you cannot kill init even with a SIGKILL even by
225 * Also note that the regs structure given here as an argument, is the latest
226 * pushed pt_regs. It may or may not be the same as the first pushed registers
227 * when the initial usermode->kernelmode transition took place. Therefore
228 * we can use user_mode(regs) to see if we came directly from kernel or user
232 static int do_signal(struct pt_regs *regs, int syscall)
235 unsigned long continue_addr = 0;
236 unsigned long restart_addr = 0;
237 unsigned long retval = 0;
241 continue_addr = regs->pc;
242 restart_addr = continue_addr - 4;
243 retval = regs->gpr[11];
246 * Setup syscall restart here so that a debugger will
247 * see the already changed PC.
250 case -ERESTART_RESTARTBLOCK:
253 case -ERESTARTNOHAND:
255 case -ERESTARTNOINTR:
257 regs->gpr[11] = regs->orig_gpr11;
258 regs->pc = restart_addr;
264 * Get the signal to deliver. During the call to get_signal the
265 * debugger may change all our registers so we may need to revert
266 * the decision to restart the syscall; specifically, if the PC is
267 * changed, don't restart the syscall.
269 if (get_signal(&ksig)) {
270 if (unlikely(restart) && regs->pc == restart_addr) {
271 if (retval == -ERESTARTNOHAND ||
272 retval == -ERESTART_RESTARTBLOCK
273 || (retval == -ERESTARTSYS
274 && !(ksig.ka.sa.sa_flags & SA_RESTART))) {
275 /* No automatic restart */
276 regs->gpr[11] = -EINTR;
277 regs->pc = continue_addr;
280 handle_signal(&ksig, regs);
283 restore_saved_sigmask();
285 * Restore pt_regs PC as syscall restart will be handled by
286 * kernel without return to userspace
288 if (unlikely(restart) && regs->pc == restart_addr) {
289 regs->pc = continue_addr;
298 do_work_pending(struct pt_regs *regs, unsigned int thread_flags, int syscall)
301 if (likely(thread_flags & _TIF_NEED_RESCHED)) {
304 if (unlikely(!user_mode(regs)))
307 if (thread_flags & (_TIF_SIGPENDING|_TIF_NOTIFY_SIGNAL)) {
308 int restart = do_signal(regs, syscall);
309 if (unlikely(restart)) {
311 * Restart without handlers.
312 * Deal with it without leaving
319 resume_user_mode_work(regs);
323 thread_flags = read_thread_flags();
324 } while (thread_flags & _TIF_WORK_MASK);