1 # SPDX-License-Identifier: GPL-2.0-only
6 Panel registration and lookup framework.
9 depends on DRM && DRM_PANEL
11 config DRM_PANEL_ABT_Y030XX067A
12 tristate "ABT Y030XX067A 320x480 LCD panel"
16 Say Y here to enable support for the Asia Better Technology Ltd.
17 Y030XX067A 320x480 3.0" panel as found in the YLM RG-280M, RG-300
18 and RG-99 handheld gaming consoles.
20 config DRM_PANEL_ARM_VERSATILE
21 tristate "ARM Versatile panel driver"
24 select VIDEOMODE_HELPERS
26 This driver supports the ARM Versatile panels connected to ARM
27 reference designs. The panel is detected using special registers
28 in the Versatile family syscon registers.
30 config DRM_PANEL_ASUS_Z00T_TM5P5_NT35596
31 tristate "ASUS Z00T TM5P5 NT35596 panel"
32 depends on GPIOLIB && OF
33 depends on DRM_MIPI_DSI
34 depends on BACKLIGHT_CLASS_DEVICE
36 Say Y here if you want to enable support for the ASUS TMP5P5
37 NT35596 1080x1920 video mode panel as found in some Asus
38 Zenfone 2 Laser Z00T devices.
40 config DRM_PANEL_AUO_A030JTN01
41 tristate "AUO A030JTN01"
45 Say Y here to enable support for the AUO A030JTN01 320x480 3.0" panel
46 as found in the YLM RS-97 handheld gaming console.
48 config DRM_PANEL_BOE_BF060Y8M_AJ0
49 tristate "Boe BF060Y8M-AJ0 panel"
51 depends on DRM_MIPI_DSI
52 depends on BACKLIGHT_CLASS_DEVICE
54 Say Y here if you want to enable support for Boe BF060Y8M-AJ0
55 5.99" AMOLED modules. The panel has a 1080x2160 resolution and
56 uses 24 bit RGB per pixel. It provides a MIPI DSI interface to
57 the host and backlight is controlled through DSI commands.
59 config DRM_PANEL_BOE_HIMAX8279D
60 tristate "Boe Himax8279d panel"
62 depends on DRM_MIPI_DSI
63 depends on BACKLIGHT_CLASS_DEVICE
65 Say Y here if you want to enable support for Boe Himax8279d
66 TFT-LCD modules. The panel has a 1200x1920 resolution and uses
67 24 bit RGB per pixel. It provides a MIPI DSI interface to
68 the host and has a built-in LED backlight.
70 config DRM_PANEL_BOE_TV101WUM_NL6
71 tristate "BOE TV101WUM and AUO KD101N80 45NA 1200x1920 panel"
73 depends on DRM_MIPI_DSI
74 depends on BACKLIGHT_CLASS_DEVICE
76 Say Y here if you want to support for BOE TV101WUM and AUO KD101N80
77 45NA WUXGA PANEL DSI Video Mode panel
79 config DRM_PANEL_DSI_CM
80 tristate "Generic DSI command mode panels"
82 depends on DRM_MIPI_DSI
83 depends on BACKLIGHT_CLASS_DEVICE
85 DRM panel driver for DSI command mode panels with support for
86 embedded and external backlights.
89 tristate "Generic LVDS panel driver"
91 depends on BACKLIGHT_CLASS_DEVICE
92 select VIDEOMODE_HELPERS
94 This driver supports LVDS panels that don't require device-specific
95 handling of power supplies or control signals. It implements automatic
96 backlight handling if the panel is attached to a backlight controller.
98 config DRM_PANEL_SIMPLE
99 tristate "support for simple panels (other than eDP ones)"
101 depends on BACKLIGHT_CLASS_DEVICE
103 select VIDEOMODE_HELPERS
105 DRM panel driver for dumb non-eDP panels that need at most a regulator
106 and a GPIO to be powered up. Optionally a backlight can be attached so
107 that it can be automatically turned off when the panel goes into a
111 tristate "support for simple Embedded DisplayPort panels"
113 depends on BACKLIGHT_CLASS_DEVICE
115 select VIDEOMODE_HELPERS
116 select DRM_DISPLAY_DP_HELPER
117 select DRM_DISPLAY_HELPER
118 select DRM_DP_AUX_BUS
119 select DRM_KMS_HELPER
121 DRM panel driver for dumb eDP panels that need at most a regulator and
122 a GPIO to be powered up. Optionally a backlight can be attached so
123 that it can be automatically turned off when the panel goes into a
126 config DRM_PANEL_EBBG_FT8719
127 tristate "EBBG FT8719 panel driver"
129 depends on DRM_MIPI_DSI
130 depends on BACKLIGHT_CLASS_DEVICE
132 Say Y here if you want to enable support for the EBBG FT8719
133 video mode panel. Mainly found on Xiaomi Poco F1 mobile phone.
134 The panel has a resolution of 1080x2246. It provides a MIPI DSI
135 interface to the host.
137 config DRM_PANEL_ELIDA_KD35T133
138 tristate "Elida KD35T133 panel driver"
140 depends on DRM_MIPI_DSI
141 depends on BACKLIGHT_CLASS_DEVICE
143 Say Y here if you want to enable support for the Elida
144 KD35T133 controller for 320x480 LCD panels with MIPI-DSI
147 config DRM_PANEL_FEIXIN_K101_IM2BA02
148 tristate "Feixin K101 IM2BA02 panel"
150 depends on DRM_MIPI_DSI
151 depends on BACKLIGHT_CLASS_DEVICE
153 Say Y here if you want to enable support for the Feixin K101 IM2BA02
154 4-lane 800x1280 MIPI DSI panel.
156 config DRM_PANEL_FEIYANG_FY07024DI26A30D
157 tristate "Feiyang FY07024DI26A30-D MIPI-DSI LCD panel"
159 depends on DRM_MIPI_DSI
160 depends on BACKLIGHT_CLASS_DEVICE
162 Say Y if you want to enable support for panels based on the
163 Feiyang FY07024DI26A30-D MIPI-DSI interface.
165 config DRM_PANEL_HIMAX_HX8394
166 tristate "HIMAX HX8394 MIPI-DSI LCD panels"
168 depends on DRM_MIPI_DSI
169 depends on BACKLIGHT_CLASS_DEVICE
171 Say Y if you want to enable support for panels based on the
172 Himax HX8394 controller, such as the HannStar HSD060BHW4
173 720x1440 TFT LCD panel that uses a MIPI-DSI interface.
175 If M is selected the module will be called panel-himax-hx8394.
177 config DRM_PANEL_ILITEK_IL9322
178 tristate "Ilitek ILI9322 320x240 QVGA panels"
182 Say Y here if you want to enable support for Ilitek IL9322
183 QVGA (320x240) RGB, YUV and ITU-T BT.656 panels.
185 config DRM_PANEL_ILITEK_ILI9341
186 tristate "Ilitek ILI9341 240x320 QVGA panels"
188 select DRM_KMS_HELPER
189 select DRM_GEM_DMA_HELPER
190 depends on BACKLIGHT_CLASS_DEVICE
193 Say Y here if you want to enable support for Ilitek IL9341
194 QVGA (240x320) RGB panels. support serial & parallel rgb
197 config DRM_PANEL_ILITEK_ILI9881C
198 tristate "Ilitek ILI9881C-based panels"
200 depends on DRM_MIPI_DSI
201 depends on BACKLIGHT_CLASS_DEVICE
203 Say Y if you want to enable support for panels based on the
204 Ilitek ILI9881c controller.
206 config DRM_PANEL_INNOLUX_EJ030NA
207 tristate "Innolux EJ030NA 320x480 LCD panel"
211 Say Y here to enable support for the Innolux/Chimei EJ030NA
212 320x480 3.0" panel as found in the RS97 V2.1, RG300(non-ips)
213 and LDK handheld gaming consoles.
215 config DRM_PANEL_INNOLUX_P079ZCA
216 tristate "Innolux P079ZCA panel"
218 depends on DRM_MIPI_DSI
219 depends on BACKLIGHT_CLASS_DEVICE
221 Say Y here if you want to enable support for Innolux P079ZCA
222 TFT-LCD modules. The panel has a 1024x768 resolution and uses
223 24 bit RGB per pixel. It provides a MIPI DSI interface to
224 the host and has a built-in LED backlight.
226 config DRM_PANEL_JADARD_JD9365DA_H3
227 tristate "Jadard JD9365DA-H3 WXGA DSI panel"
229 depends on DRM_MIPI_DSI
230 depends on BACKLIGHT_CLASS_DEVICE
232 Say Y here if you want to enable support for Jadard JD9365DA-H3
233 WXGA MIPI DSI panel. The panel support TFT dot matrix LCD with
234 800RGBx1280 dots at maximum.
236 config DRM_PANEL_JDI_LT070ME05000
237 tristate "JDI LT070ME05000 WUXGA DSI panel"
239 depends on DRM_MIPI_DSI
240 depends on BACKLIGHT_CLASS_DEVICE
242 Say Y here if you want to enable support for JDI DSI video mode
243 panel as found in Google Nexus 7 (2013) devices.
244 The panel has a 1200(RGB)×1920 (WUXGA) resolution and uses
247 config DRM_PANEL_JDI_R63452
248 tristate "JDI R63452 Full HD DSI panel"
250 depends on DRM_MIPI_DSI
251 depends on BACKLIGHT_CLASS_DEVICE
253 Say Y here if you want to enable support for the JDI R63452
254 DSI command mode panel as found in Xiaomi Mi 5 Devices.
256 config DRM_PANEL_KHADAS_TS050
257 tristate "Khadas TS050 panel"
259 depends on DRM_MIPI_DSI
260 depends on BACKLIGHT_CLASS_DEVICE
262 Say Y here if you want to enable support for Khadas TS050 TFT-LCD
263 panel module. The panel has a 1080x1920 resolution and uses
264 24 bit RGB per pixel. It provides a MIPI DSI interface to
265 the host, a built-in LED backlight and touch controller.
267 config DRM_PANEL_KINGDISPLAY_KD097D04
268 tristate "Kingdisplay kd097d04 panel"
270 depends on DRM_MIPI_DSI
271 depends on BACKLIGHT_CLASS_DEVICE
273 Say Y here if you want to enable support for Kingdisplay kd097d04
274 TFT-LCD modules. The panel has a 1536x2048 resolution and uses
275 24 bit RGB per pixel. It provides a MIPI DSI interface to
276 the host and has a built-in LED backlight.
278 config DRM_PANEL_LEADTEK_LTK050H3146W
279 tristate "Leadtek LTK050H3146W panel"
281 depends on DRM_MIPI_DSI
282 depends on BACKLIGHT_CLASS_DEVICE
284 Say Y here if you want to enable support for Leadtek LTK050H3146W
285 TFT-LCD modules. The panel has a 720x1280 resolution and uses
286 24 bit RGB per pixel. It provides a MIPI DSI interface to
287 the host and has a built-in LED backlight.
289 config DRM_PANEL_LEADTEK_LTK500HD1829
290 tristate "Leadtek LTK500HD1829 panel"
292 depends on DRM_MIPI_DSI
293 depends on BACKLIGHT_CLASS_DEVICE
295 Say Y here if you want to enable support for Kingdisplay kd097d04
296 TFT-LCD modules. The panel has a 1536x2048 resolution and uses
297 24 bit RGB per pixel. It provides a MIPI DSI interface to
298 the host and has a built-in LED backlight.
300 config DRM_PANEL_SAMSUNG_LD9040
301 tristate "Samsung LD9040 RGB/SPI panel"
303 select VIDEOMODE_HELPERS
305 config DRM_PANEL_LG_LB035Q02
306 tristate "LG LB035Q024573 RGB panel"
307 depends on GPIOLIB && OF && SPI
309 Say Y here if you want to enable support for the LB035Q02 RGB panel
310 (found on the Gumstix Overo Palo35 board). To compile this driver as
311 a module, choose M here.
313 config DRM_PANEL_LG_LG4573
314 tristate "LG4573 RGB/SPI panel"
316 select VIDEOMODE_HELPERS
318 Say Y here if you want to enable support for LG4573 RGB panel.
319 To compile this driver as a module, choose M here.
321 config DRM_PANEL_MAGNACHIP_D53E6EA8966
322 tristate "Magnachip D53E6EA8966 DSI panel"
324 depends on DRM_MIPI_DSI
325 depends on BACKLIGHT_CLASS_DEVICE
328 DRM panel driver for the Samsung AMS495QA01 panel controlled
329 with the Magnachip D53E6EA8966 panel IC. This panel receives
330 video data via DSI but commands via 9-bit SPI using DBI.
332 config DRM_PANEL_NEC_NL8048HL11
333 tristate "NEC NL8048HL11 RGB panel"
334 depends on GPIOLIB && OF && SPI
336 Say Y here if you want to enable support for the NEC NL8048HL11 RGB
337 panel (found on the Zoom2/3/3630 SDP boards). To compile this driver
338 as a module, choose M here.
340 config DRM_PANEL_NEWVISION_NV3051D
341 tristate "NewVision NV3051D DSI panel"
343 depends on DRM_MIPI_DSI
344 depends on BACKLIGHT_CLASS_DEVICE
346 This driver supports the NV3051D based panel found on the Anbernic
349 config DRM_PANEL_NEWVISION_NV3052C
350 tristate "NewVision NV3052C RGB/SPI panel"
352 depends on BACKLIGHT_CLASS_DEVICE
355 Say Y here if you want to enable support for the panels built
356 around the NewVision NV3052C display controller.
358 config DRM_PANEL_NOVATEK_NT35510
359 tristate "Novatek NT35510 RGB panel driver"
361 depends on DRM_MIPI_DSI
362 depends on BACKLIGHT_CLASS_DEVICE
364 Say Y here if you want to enable support for the panels built
365 around the Novatek NT35510 display controller, such as some
368 config DRM_PANEL_NOVATEK_NT35560
369 tristate "Novatek NT35560 DSI command mode panel"
371 depends on DRM_MIPI_DSI
372 depends on BACKLIGHT_CLASS_DEVICE
373 select VIDEOMODE_HELPERS
375 Say Y here if you want to enable the Novatek NT35560 display
376 controller. This panel supports DSI in both command and video
377 mode. This supports several panels such as Sony ACX424AKM and
380 config DRM_PANEL_NOVATEK_NT35950
381 tristate "Novatek NT35950 DSI panel"
383 depends on DRM_MIPI_DSI
384 depends on BACKLIGHT_CLASS_DEVICE
386 Say Y here if you want to enable support for the panels built
387 around the Novatek NT35950 display controller, such as some
388 Sharp panels used in Sony Xperia Z5 Premium and XZ Premium
391 config DRM_PANEL_NOVATEK_NT36523
392 tristate "Novatek NT36523 panel driver"
394 depends on DRM_MIPI_DSI
395 depends on BACKLIGHT_CLASS_DEVICE
397 Say Y here if you want to enable support for the panels built
398 around the Novatek NT36523 display controller, such as some
399 Boe panels used in Xiaomi Mi Pad 5 and 5 Pro tablets.
401 config DRM_PANEL_NOVATEK_NT36672A
402 tristate "Novatek NT36672A DSI panel"
404 depends on DRM_MIPI_DSI
405 depends on BACKLIGHT_CLASS_DEVICE
407 Say Y here if you want to enable support for the panels built
408 around the Novatek NT36672A display controller, such as some
409 Tianma panels used in a few Xiaomi Poco F1 mobile phones.
411 config DRM_PANEL_NOVATEK_NT39016
412 tristate "Novatek NT39016 RGB/SPI panel"
414 depends on BACKLIGHT_CLASS_DEVICE
417 Say Y here if you want to enable support for the panels built
418 around the Novatek NT39016 display controller.
420 config DRM_PANEL_MANTIX_MLAF057WE51
421 tristate "Mantix MLAF057WE51-X MIPI-DSI LCD panel"
423 depends on DRM_MIPI_DSI
424 depends on BACKLIGHT_CLASS_DEVICE
426 Say Y here if you want to enable support for the Mantix
427 MLAF057WE51-X MIPI DSI panel as e.g. used in the Librem 5. It
428 has a resolution of 720x1440 pixels, a built in backlight and touch
431 config DRM_PANEL_OLIMEX_LCD_OLINUXINO
432 tristate "Olimex LCD-OLinuXino panel"
435 depends on BACKLIGHT_CLASS_DEVICE
438 The panel is used with different sizes LCDs, from 480x272 to
439 1280x800, and 24 bit per pixel.
441 Say Y here if you want to enable support for Olimex Ltd.
444 config DRM_PANEL_ORISETECH_OTA5601A
445 tristate "Orise Technology ota5601a RGB/SPI panel"
447 depends on BACKLIGHT_CLASS_DEVICE
450 Say Y here if you want to enable support for the panels built
451 around the Orise Technology OTA9601A display controller.
453 config DRM_PANEL_ORISETECH_OTM8009A
454 tristate "Orise Technology otm8009a 480x800 dsi 2dl panel"
456 depends on DRM_MIPI_DSI
457 depends on BACKLIGHT_CLASS_DEVICE
459 Say Y here if you want to enable support for Orise Technology
460 otm8009a 480x800 dsi 2dl panel.
462 config DRM_PANEL_OSD_OSD101T2587_53TS
463 tristate "OSD OSD101T2587-53TS DSI 1920x1200 video mode panel"
465 depends on DRM_MIPI_DSI
466 depends on BACKLIGHT_CLASS_DEVICE
468 Say Y here if you want to enable support for One Stop Displays
469 OSD101T2587-53TS 10.1" 1920x1200 dsi panel.
471 config DRM_PANEL_PANASONIC_VVX10F034N00
472 tristate "Panasonic VVX10F034N00 1920x1200 video mode panel"
474 depends on DRM_MIPI_DSI
475 depends on BACKLIGHT_CLASS_DEVICE
477 Say Y here if you want to enable support for Panasonic VVX10F034N00
478 WUXGA (1920x1200) Novatek NT1397-based DSI panel as found in some
481 config DRM_PANEL_RASPBERRYPI_TOUCHSCREEN
482 tristate "Raspberry Pi 7-inch touchscreen panel"
483 depends on DRM_MIPI_DSI
485 Say Y here if you want to enable support for the Raspberry
486 Pi 7" Touchscreen. To compile this driver as a module,
489 config DRM_PANEL_RAYDIUM_RM67191
490 tristate "Raydium RM67191 FHD 1080x1920 DSI video mode panel"
492 depends on DRM_MIPI_DSI
493 depends on BACKLIGHT_CLASS_DEVICE
495 Say Y here if you want to enable support for Raydium RM67191 FHD
496 (1080x1920) DSI panel.
498 config DRM_PANEL_RAYDIUM_RM68200
499 tristate "Raydium RM68200 720x1280 DSI video mode panel"
501 depends on DRM_MIPI_DSI
502 depends on BACKLIGHT_CLASS_DEVICE
504 Say Y here if you want to enable support for Raydium RM68200
505 720x1280 DSI video mode panel.
507 config DRM_PANEL_RONBO_RB070D30
508 tristate "Ronbo Electronics RB070D30 panel"
510 depends on DRM_MIPI_DSI
511 depends on BACKLIGHT_CLASS_DEVICE
513 Say Y here if you want to enable support for Ronbo Electronics
514 RB070D30 1024x600 DSI panel.
516 config DRM_PANEL_SAMSUNG_ATNA33XC20
517 tristate "Samsung ATNA33XC20 eDP panel"
519 depends on BACKLIGHT_CLASS_DEVICE
521 select DRM_DISPLAY_DP_HELPER
522 select DRM_DISPLAY_HELPER
523 select DRM_DP_AUX_BUS
525 DRM panel driver for the Samsung ATNA33XC20 panel. This panel can't
526 be handled by the DRM_PANEL_SIMPLE driver because its power
527 sequencing is non-standard.
529 config DRM_PANEL_SAMSUNG_DB7430
530 tristate "Samsung DB7430-based DPI panels"
531 depends on OF && SPI && GPIOLIB
532 depends on BACKLIGHT_CLASS_DEVICE
535 Say Y here if you want to enable support for the Samsung
536 DB7430 DPI display controller used in such devices as the
537 LMS397KF04 480x800 DPI panel.
539 config DRM_PANEL_SAMSUNG_S6D16D0
540 tristate "Samsung S6D16D0 DSI video mode panel"
542 depends on DRM_MIPI_DSI
543 select VIDEOMODE_HELPERS
545 config DRM_PANEL_SAMSUNG_S6D27A1
546 tristate "Samsung S6D27A1 DPI panel driver"
547 depends on OF && SPI && GPIOLIB
550 Say Y here if you want to enable support for the Samsung
551 S6D27A1 DPI 480x800 panel.
553 This panel can be found in Samsung Galaxy Ace 2
554 GT-I8160 mobile phone.
556 config DRM_PANEL_SAMSUNG_S6D7AA0
557 tristate "Samsung S6D7AA0 MIPI-DSI video mode panel controller"
559 depends on BACKLIGHT_CLASS_DEVICE
561 select VIDEOMODE_HELPERS
563 config DRM_PANEL_SAMSUNG_S6E3HA2
564 tristate "Samsung S6E3HA2 DSI video mode panel"
566 depends on DRM_MIPI_DSI
567 depends on BACKLIGHT_CLASS_DEVICE
568 select VIDEOMODE_HELPERS
570 config DRM_PANEL_SAMSUNG_S6E63J0X03
571 tristate "Samsung S6E63J0X03 DSI command mode panel"
573 depends on DRM_MIPI_DSI
574 depends on BACKLIGHT_CLASS_DEVICE
575 select VIDEOMODE_HELPERS
577 config DRM_PANEL_SAMSUNG_S6E63M0
578 tristate "Samsung S6E63M0 RGB panel"
580 depends on BACKLIGHT_CLASS_DEVICE
582 Say Y here if you want to enable support for Samsung S6E63M0
583 AMOLED LCD panel. This panel can be accessed using SPI or
586 config DRM_PANEL_SAMSUNG_S6E63M0_SPI
587 tristate "Samsung S6E63M0 RGB SPI interface"
589 depends on DRM_PANEL_SAMSUNG_S6E63M0
590 default DRM_PANEL_SAMSUNG_S6E63M0
593 Say Y here if you want to be able to access the Samsung
594 S6E63M0 panel using SPI.
596 config DRM_PANEL_SAMSUNG_S6E63M0_DSI
597 tristate "Samsung S6E63M0 RGB DSI interface"
598 depends on DRM_MIPI_DSI
599 depends on DRM_PANEL_SAMSUNG_S6E63M0
601 Say Y here if you want to be able to access the Samsung
602 S6E63M0 panel using DSI.
604 config DRM_PANEL_SAMSUNG_S6E88A0_AMS452EF01
605 tristate "Samsung AMS452EF01 panel with S6E88A0 DSI video mode controller"
608 select VIDEOMODE_HELPERS
610 config DRM_PANEL_SAMSUNG_S6E8AA0
611 tristate "Samsung S6E8AA0 DSI video mode panel"
614 select VIDEOMODE_HELPERS
616 config DRM_PANEL_SAMSUNG_SOFEF00
617 tristate "Samsung sofef00/s6e3fc2x01 OnePlus 6/6T DSI cmd mode panels"
619 depends on DRM_MIPI_DSI
620 depends on BACKLIGHT_CLASS_DEVICE
621 select VIDEOMODE_HELPERS
623 Say Y or M here if you want to enable support for the Samsung AMOLED
624 command mode panels found in the OnePlus 6/6T smartphones.
626 The panels are 2280x1080@60Hz and 2340x1080@60Hz respectively
628 config DRM_PANEL_SEIKO_43WVF1G
629 tristate "Seiko 43WVF1G panel"
631 depends on BACKLIGHT_CLASS_DEVICE
632 select VIDEOMODE_HELPERS
634 Say Y here if you want to enable support for the Seiko
635 43WVF1G controller for 800x480 LCD panels
637 config DRM_PANEL_SHARP_LQ101R1SX01
638 tristate "Sharp LQ101R1SX01 panel"
640 depends on DRM_MIPI_DSI
641 depends on BACKLIGHT_CLASS_DEVICE
643 Say Y here if you want to enable support for Sharp LQ101R1SX01
644 TFT-LCD modules. The panel has a 2560x1600 resolution and uses
645 24 bit RGB per pixel. It provides a dual MIPI DSI interface to
646 the host and has a built-in LED backlight.
648 To compile this driver as a module, choose M here: the module
649 will be called panel-sharp-lq101r1sx01.
651 config DRM_PANEL_SHARP_LS037V7DW01
652 tristate "Sharp LS037V7DW01 VGA LCD panel"
653 depends on GPIOLIB && OF && REGULATOR
655 Say Y here if you want to enable support for Sharp LS037V7DW01 VGA
656 (480x640) LCD panel (found on the TI SDP3430 board).
658 config DRM_PANEL_SHARP_LS043T1LE01
659 tristate "Sharp LS043T1LE01 qHD video mode panel"
661 depends on DRM_MIPI_DSI
662 depends on BACKLIGHT_CLASS_DEVICE
664 Say Y here if you want to enable support for Sharp LS043T1LE01 qHD
665 (540x960) DSI panel as found on the Qualcomm APQ8074 Dragonboard
667 config DRM_PANEL_SHARP_LS060T1SX01
668 tristate "Sharp LS060T1SX01 FullHD video mode panel"
670 depends on DRM_MIPI_DSI
671 depends on BACKLIGHT_CLASS_DEVICE
673 Say Y here if you want to enable support for Sharp LS060T1SX01 6.0"
674 FullHD (1080x1920) DSI panel as found in Dragonboard Display Adapter
677 config DRM_PANEL_SITRONIX_ST7701
678 tristate "Sitronix ST7701 panel driver"
680 depends on DRM_MIPI_DSI
681 depends on BACKLIGHT_CLASS_DEVICE
683 Say Y here if you want to enable support for the Sitronix
684 ST7701 controller for 480X864 LCD panels with MIPI/RGB/SPI
687 config DRM_PANEL_SITRONIX_ST7703
688 tristate "Sitronix ST7703 based MIPI touchscreen panels"
690 depends on DRM_MIPI_DSI
691 depends on BACKLIGHT_CLASS_DEVICE
693 Say Y here if you want to enable support for Sitronix ST7703 based
694 panels, souch as Rocktech JH057N00900 MIPI DSI panel as e.g. used in
695 the Librem 5 devkit. It has a resolution of 720x1440 pixels, a built
696 in backlight and touch controller.
697 Touch input support is provided by the goodix driver and needs to be
700 config DRM_PANEL_SITRONIX_ST7789V
701 tristate "Sitronix ST7789V panel"
703 depends on BACKLIGHT_CLASS_DEVICE
705 Say Y here if you want to enable support for the Sitronix
706 ST7789V controller for 240x320 LCD panels
708 config DRM_PANEL_SONY_ACX565AKM
709 tristate "Sony ACX565AKM panel"
710 depends on GPIOLIB && OF && SPI
711 depends on BACKLIGHT_CLASS_DEVICE
713 Say Y here if you want to enable support for the Sony ACX565AKM
714 800x600 3.5" panel (found on the Nokia N900).
716 config DRM_PANEL_SONY_TD4353_JDI
717 tristate "Sony TD4353 JDI panel"
718 depends on GPIOLIB && OF
719 depends on DRM_MIPI_DSI
720 depends on BACKLIGHT_CLASS_DEVICE
722 Say Y here if you want to enable support for the Sony Tama
723 TD4353 JDI command mode panel as found on some Sony Xperia
724 XZ2 and XZ2 Compact smartphones.
726 config DRM_PANEL_SONY_TULIP_TRULY_NT35521
727 tristate "Sony Tulip Truly NT35521 panel"
728 depends on GPIOLIB && OF
729 depends on DRM_MIPI_DSI
730 depends on BACKLIGHT_CLASS_DEVICE
732 Say Y here if you want to enable support for the Sony Tulip
733 NT35521 1280x720 video mode panel as found on Sony Xperia M4
736 config DRM_PANEL_TDO_TL070WSH30
737 tristate "TDO TL070WSH30 DSI panel"
739 depends on DRM_MIPI_DSI
740 depends on BACKLIGHT_CLASS_DEVICE
742 Say Y here if you want to enable support for TDO TL070WSH30 TFT-LCD
743 panel module. The panel has a 1024×600 resolution and uses
744 24 bit RGB per pixel. It provides a MIPI DSI interface to
745 the host, a built-in LED backlight and touch controller.
747 config DRM_PANEL_TPO_TD028TTEC1
748 tristate "Toppoly (TPO) TD028TTEC1 panel driver"
750 depends on BACKLIGHT_CLASS_DEVICE
752 Say Y here if you want to enable support for TPO TD028TTEC1 480x640
753 2.8" panel (found on the OpenMoko Neo FreeRunner and Neo 1973).
755 config DRM_PANEL_TPO_TD043MTEA1
756 tristate "Toppoly (TPO) TD043MTEA1 panel driver"
757 depends on GPIOLIB && OF && REGULATOR && SPI
759 Say Y here if you want to enable support for TPO TD043MTEA1 800x480
760 4.3" panel (found on the OMAP3 Pandora board).
762 config DRM_PANEL_TPO_TPG110
763 tristate "TPO TPG 800x400 panel"
764 depends on OF && SPI && GPIOLIB
765 depends on BACKLIGHT_CLASS_DEVICE
767 Say Y here if you want to enable support for TPO TPG110
768 400CH LTPS TFT LCD Single Chip Digital Driver for up to
771 config DRM_PANEL_TRULY_NT35597_WQXGA
772 tristate "Truly WQXGA"
774 depends on DRM_MIPI_DSI
776 Say Y here if you want to enable support for Truly NT35597 WQXGA Dual DSI
779 config DRM_PANEL_VISIONOX_RM69299
780 tristate "Visionox RM69299"
782 depends on DRM_MIPI_DSI
784 Say Y here if you want to enable support for Visionox
785 RM69299 DSI Video Mode panel.
787 config DRM_PANEL_VISIONOX_VTDR6130
788 tristate "Visionox VTDR6130"
790 depends on DRM_MIPI_DSI
791 depends on BACKLIGHT_CLASS_DEVICE
793 Say Y here if you want to enable support for Visionox
794 VTDR6130 1080x2400 AMOLED DSI panel.
796 config DRM_PANEL_WIDECHIPS_WS2401
797 tristate "Widechips WS2401 DPI panel driver"
798 depends on SPI && GPIOLIB
799 depends on BACKLIGHT_CLASS_DEVICE
802 Say Y here if you want to enable support for the Widechips WS2401 DPI
803 480x800 display controller used in panels such as Samsung LMS380KF01.
804 This display is used in the Samsung Galaxy Ace 2 GT-I8160 (Codina).
806 config DRM_PANEL_XINPENG_XPP055C272
807 tristate "Xinpeng XPP055C272 panel driver"
809 depends on DRM_MIPI_DSI
810 depends on BACKLIGHT_CLASS_DEVICE
812 Say Y here if you want to enable support for the Xinpeng
813 XPP055C272 controller for 720x1280 LCD panels with MIPI/RGB/SPI