drivers/gpu/drm/i915/display/intel_dvo.c

   1 /*
   2  * Copyright 2006 Dave Airlie <[email protected]>
   3  * Copyright © 2006-2007 Intel Corporation
   4  *
   5  * Permission is hereby granted, free of charge, to any person obtaining a
   6  * copy of this software and associated documentation files (the "Software"),
   7  * to deal in the Software without restriction, including without limitation
   8  * the rights to use, copy, modify, merge, publish, distribute, sublicense,
   9  * and/or sell copies of the Software, and to permit persons to whom the
  10  * Software is furnished to do so, subject to the following conditions:
  11  *
  12  * The above copyright notice and this permission notice (including the next
  13  * paragraph) shall be included in all copies or substantial portions of the
  14  * Software.
  15  *
  16  * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
  17  * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
  18  * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
  19  * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
  20  * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
  21  * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
  22  * DEALINGS IN THE SOFTWARE.
  23  *
  24  * Authors:
  25  *      Eric Anholt <[email protected]>
  26  */
  27
  28 #include <linux/i2c.h>
  29 #include <linux/slab.h>
  30
  31 #include <drm/drm_atomic_helper.h>
  32 #include <drm/drm_crtc.h>
  33
  34 #include "i915_drv.h"
  35 #include "i915_reg.h"
  36 #include "intel_connector.h"
  37 #include "intel_de.h"
  38 #include "intel_display_types.h"
  39 #include "intel_dvo.h"
  40 #include "intel_dvo_dev.h"
  41 #include "intel_dvo_regs.h"
  42 #include "intel_gmbus.h"
  43 #include "intel_panel.h"
  44
  45 #define INTEL_DVO_CHIP_NONE     0
  46 #define INTEL_DVO_CHIP_LVDS     1
  47 #define INTEL_DVO_CHIP_TMDS     2
  48 #define INTEL_DVO_CHIP_TVOUT    4
  49 #define INTEL_DVO_CHIP_LVDS_NO_FIXED    5
  50
  51 #define SIL164_ADDR     0x38
  52 #define CH7xxx_ADDR     0x76
  53 #define TFP410_ADDR     0x38
  54 #define NS2501_ADDR     0x38
  55
  56 static const struct intel_dvo_device intel_dvo_devices[] = {
  57         {
  58                 .type = INTEL_DVO_CHIP_TMDS,
  59                 .name = "sil164",
  60                 .port = PORT_C,
  61                 .slave_addr = SIL164_ADDR,
  62                 .dev_ops = &sil164_ops,
  63         },
  64         {
  65                 .type = INTEL_DVO_CHIP_TMDS,
  66                 .name = "ch7xxx",
  67                 .port = PORT_C,
  68                 .slave_addr = CH7xxx_ADDR,
  69                 .dev_ops = &ch7xxx_ops,
  70         },
  71         {
  72                 .type = INTEL_DVO_CHIP_TMDS,
  73                 .name = "ch7xxx",
  74                 .port = PORT_C,
  75                 .slave_addr = 0x75, /* For some ch7010 */
  76                 .dev_ops = &ch7xxx_ops,
  77         },
  78         {
  79                 .type = INTEL_DVO_CHIP_LVDS,
  80                 .name = "ivch",
  81                 .port = PORT_A,
  82                 .slave_addr = 0x02, /* Might also be 0x44, 0x84, 0xc4 */
  83                 .dev_ops = &ivch_ops,
  84         },
  85         {
  86                 .type = INTEL_DVO_CHIP_TMDS,
  87                 .name = "tfp410",
  88                 .port = PORT_C,
  89                 .slave_addr = TFP410_ADDR,
  90                 .dev_ops = &tfp410_ops,
  91         },
  92         {
  93                 .type = INTEL_DVO_CHIP_LVDS,
  94                 .name = "ch7017",
  95                 .port = PORT_C,
  96                 .slave_addr = 0x75,
  97                 .gpio = GMBUS_PIN_DPB,
  98                 .dev_ops = &ch7017_ops,
  99         },
 100         {
 101                 .type = INTEL_DVO_CHIP_LVDS_NO_FIXED,
 102                 .name = "ns2501",
 103                 .port = PORT_B,
 104                 .slave_addr = NS2501_ADDR,
 105                 .dev_ops = &ns2501_ops,
 106         },
 107 };
 108
 109 struct intel_dvo {
 110         struct intel_encoder base;
 111
 112         struct intel_dvo_device dev;
 113
 114         struct intel_connector *attached_connector;
 115 };
 116
 117 static struct intel_dvo *enc_to_dvo(struct intel_encoder *encoder)
 118 {
 119         return container_of(encoder, struct intel_dvo, base);
 120 }
 121
 122 static struct intel_dvo *intel_attached_dvo(struct intel_connector *connector)
 123 {
 124         return enc_to_dvo(intel_attached_encoder(connector));
 125 }
 126
 127 static bool intel_dvo_connector_get_hw_state(struct intel_connector *connector)
 128 {
 129         struct drm_i915_private *i915 = to_i915(connector->base.dev);
 130         struct intel_encoder *encoder = intel_attached_encoder(connector);
 131         struct intel_dvo *intel_dvo = enc_to_dvo(encoder);
 132         enum port port = encoder->port;
 133         u32 tmp;
 134
 135         tmp = intel_de_read(i915, DVO(port));
 136
 137         if (!(tmp & DVO_ENABLE))
 138                 return false;
 139
 140         return intel_dvo->dev.dev_ops->get_hw_state(&intel_dvo->dev);
 141 }
 142
 143 static bool intel_dvo_get_hw_state(struct intel_encoder *encoder,
 144                                    enum pipe *pipe)
 145 {
 146         struct drm_i915_private *i915 = to_i915(encoder->base.dev);
 147         enum port port = encoder->port;
 148         u32 tmp;
 149
 150         tmp = intel_de_read(i915, DVO(port));
 151
 152         *pipe = REG_FIELD_GET(DVO_PIPE_SEL_MASK, tmp);
 153
 154         return tmp & DVO_ENABLE;
 155 }
 156
 157 static void intel_dvo_get_config(struct intel_encoder *encoder,
 158                                  struct intel_crtc_state *pipe_config)
 159 {
 160         struct drm_i915_private *i915 = to_i915(encoder->base.dev);
 161         enum port port = encoder->port;
 162         u32 tmp, flags = 0;
 163
 164         pipe_config->output_types |= BIT(INTEL_OUTPUT_DVO);
 165
 166         tmp = intel_de_read(i915, DVO(port));
 167         if (tmp & DVO_HSYNC_ACTIVE_HIGH)
 168                 flags |= DRM_MODE_FLAG_PHSYNC;
 169         else
 170                 flags |= DRM_MODE_FLAG_NHSYNC;
 171         if (tmp & DVO_VSYNC_ACTIVE_HIGH)
 172                 flags |= DRM_MODE_FLAG_PVSYNC;
 173         else
 174                 flags |= DRM_MODE_FLAG_NVSYNC;
 175
 176         pipe_config->hw.adjusted_mode.flags |= flags;
 177
 178         pipe_config->hw.adjusted_mode.crtc_clock = pipe_config->port_clock;
 179 }
 180
 181 static void intel_disable_dvo(struct intel_atomic_state *state,
 182                               struct intel_encoder *encoder,
 183                               const struct intel_crtc_state *old_crtc_state,
 184                               const struct drm_connector_state *old_conn_state)
 185 {
 186         struct drm_i915_private *i915 = to_i915(encoder->base.dev);
 187         struct intel_dvo *intel_dvo = enc_to_dvo(encoder);
 188         enum port port = encoder->port;
 189
 190         intel_dvo->dev.dev_ops->dpms(&intel_dvo->dev, false);
 191
 192         intel_de_rmw(i915, DVO(port), DVO_ENABLE, 0);
 193         intel_de_posting_read(i915, DVO(port));
 194 }
 195
 196 static void intel_enable_dvo(struct intel_atomic_state *state,
 197                              struct intel_encoder *encoder,
 198                              const struct intel_crtc_state *pipe_config,
 199                              const struct drm_connector_state *conn_state)
 200 {
 201         struct drm_i915_private *i915 = to_i915(encoder->base.dev);
 202         struct intel_dvo *intel_dvo = enc_to_dvo(encoder);
 203         enum port port = encoder->port;
 204
 205         intel_dvo->dev.dev_ops->mode_set(&intel_dvo->dev,
 206                                          &pipe_config->hw.mode,
 207                                          &pipe_config->hw.adjusted_mode);
 208
 209         intel_de_rmw(i915, DVO(port), 0, DVO_ENABLE);
 210         intel_de_posting_read(i915, DVO(port));
 211
 212         intel_dvo->dev.dev_ops->dpms(&intel_dvo->dev, true);
 213 }
 214
 215 static enum drm_mode_status
 216 intel_dvo_mode_valid(struct drm_connector *_connector,
 217                      struct drm_display_mode *mode)
 218 {
 219         struct intel_connector *connector = to_intel_connector(_connector);
 220         struct intel_dvo *intel_dvo = intel_attached_dvo(connector);
 221         const struct drm_display_mode *fixed_mode =
 222                 intel_panel_fixed_mode(connector, mode);
 223         int max_dotclk = to_i915(connector->base.dev)->max_dotclk_freq;
 224         int target_clock = mode->clock;
 225
 226         if (mode->flags & DRM_MODE_FLAG_DBLSCAN)
 227                 return MODE_NO_DBLESCAN;
 228
 229         /* XXX: Validate clock range */
 230
 231         if (fixed_mode) {
 232                 enum drm_mode_status status;
 233
 234                 status = intel_panel_mode_valid(connector, mode);
 235                 if (status != MODE_OK)
 236                         return status;
 237
 238                 target_clock = fixed_mode->clock;
 239         }
 240
 241         if (target_clock > max_dotclk)
 242                 return MODE_CLOCK_HIGH;
 243
 244         return intel_dvo->dev.dev_ops->mode_valid(&intel_dvo->dev, mode);
 245 }
 246
 247 static int intel_dvo_compute_config(struct intel_encoder *encoder,
 248                                     struct intel_crtc_state *pipe_config,
 249                                     struct drm_connector_state *conn_state)
 250 {
 251         struct intel_dvo *intel_dvo = enc_to_dvo(encoder);
 252         struct intel_connector *connector = to_intel_connector(conn_state->connector);
 253         struct drm_display_mode *adjusted_mode = &pipe_config->hw.adjusted_mode;
 254         const struct drm_display_mode *fixed_mode =
 255                 intel_panel_fixed_mode(intel_dvo->attached_connector, adjusted_mode);
 256
 257         /*
 258          * If we have timings from the BIOS for the panel, put them in
 259          * to the adjusted mode.  The CRTC will be set up for this mode,
 260          * with the panel scaling set up to source from the H/VDisplay
 261          * of the original mode.
 262          */
 263         if (fixed_mode) {
 264                 int ret;
 265
 266                 ret = intel_panel_compute_config(connector, adjusted_mode);
 267                 if (ret)
 268                         return ret;
 269         }
 270
 271         if (adjusted_mode->flags & DRM_MODE_FLAG_DBLSCAN)
 272                 return -EINVAL;
 273
 274         pipe_config->sink_format = INTEL_OUTPUT_FORMAT_RGB;
 275         pipe_config->output_format = INTEL_OUTPUT_FORMAT_RGB;
 276
 277         return 0;
 278 }
 279
 280 static void intel_dvo_pre_enable(struct intel_atomic_state *state,
 281                                  struct intel_encoder *encoder,
 282                                  const struct intel_crtc_state *pipe_config,
 283                                  const struct drm_connector_state *conn_state)
 284 {
 285         struct drm_i915_private *i915 = to_i915(encoder->base.dev);
 286         struct intel_crtc *crtc = to_intel_crtc(pipe_config->uapi.crtc);
 287         const struct drm_display_mode *adjusted_mode = &pipe_config->hw.adjusted_mode;
 288         enum port port = encoder->port;
 289         enum pipe pipe = crtc->pipe;
 290         u32 dvo_val;
 291
 292         /* Save the active data order, since I don't know what it should be set to. */
 293         dvo_val = intel_de_read(i915, DVO(port)) &
 294                   (DVO_DEDICATED_INT_ENABLE |
 295                    DVO_PRESERVE_MASK | DVO_ACT_DATA_ORDER_MASK);
 296         dvo_val |= DVO_DATA_ORDER_FP | DVO_BORDER_ENABLE |
 297                    DVO_BLANK_ACTIVE_HIGH;
 298
 299         dvo_val |= DVO_PIPE_SEL(pipe);
 300         dvo_val |= DVO_PIPE_STALL;
 301         if (adjusted_mode->flags & DRM_MODE_FLAG_PHSYNC)
 302                 dvo_val |= DVO_HSYNC_ACTIVE_HIGH;
 303         if (adjusted_mode->flags & DRM_MODE_FLAG_PVSYNC)
 304                 dvo_val |= DVO_VSYNC_ACTIVE_HIGH;
 305
 306         intel_de_write(i915, DVO_SRCDIM(port),
 307                        DVO_SRCDIM_HORIZONTAL(adjusted_mode->crtc_hdisplay) |
 308                        DVO_SRCDIM_VERTICAL(adjusted_mode->crtc_vdisplay));
 309         intel_de_write(i915, DVO(port), dvo_val);
 310 }
 311
 312 static enum drm_connector_status
 313 intel_dvo_detect(struct drm_connector *_connector, bool force)
 314 {
 315         struct intel_connector *connector = to_intel_connector(_connector);
 316         struct drm_i915_private *i915 = to_i915(connector->base.dev);
 317         struct intel_dvo *intel_dvo = intel_attached_dvo(connector);
 318
 319         drm_dbg_kms(&i915->drm, "[CONNECTOR:%d:%s]\n",
 320                     connector->base.base.id, connector->base.name);
 321
 322         if (!INTEL_DISPLAY_ENABLED(i915))
 323                 return connector_status_disconnected;
 324
 325         return intel_dvo->dev.dev_ops->detect(&intel_dvo->dev);
 326 }
 327
 328 static int intel_dvo_get_modes(struct drm_connector *_connector)
 329 {
 330         struct intel_connector *connector = to_intel_connector(_connector);
 331         struct drm_i915_private *i915 = to_i915(connector->base.dev);
 332         int num_modes;
 333
 334         /*
 335          * We should probably have an i2c driver get_modes function for those
 336          * devices which will have a fixed set of modes determined by the chip
 337          * (TV-out, for example), but for now with just TMDS and LVDS,
 338          * that's not the case.
 339          */
 340         num_modes = intel_ddc_get_modes(&connector->base,
 341                                         intel_gmbus_get_adapter(i915, GMBUS_PIN_DPC));
 342         if (num_modes)
 343                 return num_modes;
 344
 345         return intel_panel_get_modes(connector);
 346 }
 347
 348 static const struct drm_connector_funcs intel_dvo_connector_funcs = {
 349         .detect = intel_dvo_detect,
 350         .late_register = intel_connector_register,
 351         .early_unregister = intel_connector_unregister,
 352         .destroy = intel_connector_destroy,
 353         .fill_modes = drm_helper_probe_single_connector_modes,
 354         .atomic_destroy_state = drm_atomic_helper_connector_destroy_state,
 355         .atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state,
 356 };
 357
 358 static const struct drm_connector_helper_funcs intel_dvo_connector_helper_funcs = {
 359         .mode_valid = intel_dvo_mode_valid,
 360         .get_modes = intel_dvo_get_modes,
 361 };
 362
 363 static void intel_dvo_enc_destroy(struct drm_encoder *encoder)
 364 {
 365         struct intel_dvo *intel_dvo = enc_to_dvo(to_intel_encoder(encoder));
 366
 367         if (intel_dvo->dev.dev_ops->destroy)
 368                 intel_dvo->dev.dev_ops->destroy(&intel_dvo->dev);
 369
 370         intel_encoder_destroy(encoder);
 371 }
 372
 373 static const struct drm_encoder_funcs intel_dvo_enc_funcs = {
 374         .destroy = intel_dvo_enc_destroy,
 375 };
 376
 377 static int intel_dvo_encoder_type(const struct intel_dvo_device *dvo)
 378 {
 379         switch (dvo->type) {
 380         case INTEL_DVO_CHIP_TMDS:
 381                 return DRM_MODE_ENCODER_TMDS;
 382         case INTEL_DVO_CHIP_LVDS_NO_FIXED:
 383         case INTEL_DVO_CHIP_LVDS:
 384                 return DRM_MODE_ENCODER_LVDS;
 385         default:
 386                 MISSING_CASE(dvo->type);
 387                 return DRM_MODE_ENCODER_NONE;
 388         }
 389 }
 390
 391 static int intel_dvo_connector_type(const struct intel_dvo_device *dvo)
 392 {
 393         switch (dvo->type) {
 394         case INTEL_DVO_CHIP_TMDS:
 395                 return DRM_MODE_CONNECTOR_DVII;
 396         case INTEL_DVO_CHIP_LVDS_NO_FIXED:
 397         case INTEL_DVO_CHIP_LVDS:
 398                 return DRM_MODE_CONNECTOR_LVDS;
 399         default:
 400                 MISSING_CASE(dvo->type);
 401                 return DRM_MODE_CONNECTOR_Unknown;
 402         }
 403 }
 404
 405 static bool intel_dvo_init_dev(struct drm_i915_private *dev_priv,
 406                                struct intel_dvo *intel_dvo,
 407                                const struct intel_dvo_device *dvo)
 408 {
 409         struct i2c_adapter *i2c;
 410         u32 dpll[I915_MAX_PIPES];
 411         enum pipe pipe;
 412         int gpio;
 413         bool ret;
 414
 415         /*
 416          * Allow the I2C driver info to specify the GPIO to be used in
 417          * special cases, but otherwise default to what's defined
 418          * in the spec.
 419          */
 420         if (intel_gmbus_is_valid_pin(dev_priv, dvo->gpio))
 421                 gpio = dvo->gpio;
 422         else if (dvo->type == INTEL_DVO_CHIP_LVDS)
 423                 gpio = GMBUS_PIN_SSC;
 424         else
 425                 gpio = GMBUS_PIN_DPB;
 426
 427         /*
 428          * Set up the I2C bus necessary for the chip we're probing.
 429          * It appears that everything is on GPIOE except for panels
 430          * on i830 laptops, which are on GPIOB (DVOA).
 431          */
 432         i2c = intel_gmbus_get_adapter(dev_priv, gpio);
 433
 434         intel_dvo->dev = *dvo;
 435
 436         /*
 437          * GMBUS NAK handling seems to be unstable, hence let the
 438          * transmitter detection run in bit banging mode for now.
 439          */
 440         intel_gmbus_force_bit(i2c, true);
 441
 442         /*
 443          * ns2501 requires the DVO 2x clock before it will
 444          * respond to i2c accesses, so make sure we have
 445          * the clock enabled before we attempt to initialize
 446          * the device.
 447          */
 448         for_each_pipe(dev_priv, pipe)
 449                 dpll[pipe] = intel_de_rmw(dev_priv, DPLL(pipe), 0, DPLL_DVO_2X_MODE);
 450
 451         ret = dvo->dev_ops->init(&intel_dvo->dev, i2c);
 452
 453         /* restore the DVO 2x clock state to original */
 454         for_each_pipe(dev_priv, pipe) {
 455                 intel_de_write(dev_priv, DPLL(pipe), dpll[pipe]);
 456         }
 457
 458         intel_gmbus_force_bit(i2c, false);
 459
 460         return ret;
 461 }
 462
 463 static bool intel_dvo_probe(struct drm_i915_private *i915,
 464                             struct intel_dvo *intel_dvo)
 465 {
 466         int i;
 467
 468         /* Now, try to find a controller */
 469         for (i = 0; i < ARRAY_SIZE(intel_dvo_devices); i++) {
 470                 if (intel_dvo_init_dev(i915, intel_dvo,
 471                                        &intel_dvo_devices[i]))
 472                         return true;
 473         }
 474
 475         return false;
 476 }
 477
 478 void intel_dvo_init(struct drm_i915_private *i915)
 479 {
 480         struct intel_connector *connector;
 481         struct intel_encoder *encoder;
 482         struct intel_dvo *intel_dvo;
 483
 484         intel_dvo = kzalloc(sizeof(*intel_dvo), GFP_KERNEL);
 485         if (!intel_dvo)
 486                 return;
 487
 488         connector = intel_connector_alloc();
 489         if (!connector) {
 490                 kfree(intel_dvo);
 491                 return;
 492         }
 493
 494         intel_dvo->attached_connector = connector;
 495
 496         encoder = &intel_dvo->base;
 497
 498         encoder->disable = intel_disable_dvo;
 499         encoder->enable = intel_enable_dvo;
 500         encoder->get_hw_state = intel_dvo_get_hw_state;
 501         encoder->get_config = intel_dvo_get_config;
 502         encoder->compute_config = intel_dvo_compute_config;
 503         encoder->pre_enable = intel_dvo_pre_enable;
 504         connector->get_hw_state = intel_dvo_connector_get_hw_state;
 505
 506         if (!intel_dvo_probe(i915, intel_dvo)) {
 507                 kfree(intel_dvo);
 508                 intel_connector_free(connector);
 509                 return;
 510         }
 511
 512         encoder->type = INTEL_OUTPUT_DVO;
 513         encoder->power_domain = POWER_DOMAIN_PORT_OTHER;
 514         encoder->port = intel_dvo->dev.port;
 515         encoder->pipe_mask = ~0;
 516
 517         if (intel_dvo->dev.type != INTEL_DVO_CHIP_LVDS)
 518                 encoder->cloneable = BIT(INTEL_OUTPUT_ANALOG) |
 519                         BIT(INTEL_OUTPUT_DVO);
 520
 521         drm_encoder_init(&i915->drm, &encoder->base,
 522                          &intel_dvo_enc_funcs,
 523                          intel_dvo_encoder_type(&intel_dvo->dev),
 524                          "DVO %c", port_name(encoder->port));
 525
 526         drm_dbg_kms(&i915->drm, "[ENCODER:%d:%s] detected %s\n",
 527                     encoder->base.base.id, encoder->base.name,
 528                     intel_dvo->dev.name);
 529
 530         if (intel_dvo->dev.type == INTEL_DVO_CHIP_TMDS)
 531                 connector->polled = DRM_CONNECTOR_POLL_CONNECT |
 532                         DRM_CONNECTOR_POLL_DISCONNECT;
 533
 534         drm_connector_init(&i915->drm, &connector->base,
 535                            &intel_dvo_connector_funcs,
 536                            intel_dvo_connector_type(&intel_dvo->dev));
 537
 538         drm_connector_helper_add(&connector->base,
 539                                  &intel_dvo_connector_helper_funcs);
 540         connector->base.display_info.subpixel_order = SubPixelHorizontalRGB;
 541
 542         intel_connector_attach_encoder(connector, encoder);
 543
 544         if (intel_dvo->dev.type == INTEL_DVO_CHIP_LVDS) {
 545                 /*
 546                  * For our LVDS chipsets, we should hopefully be able
 547                  * to dig the fixed panel mode out of the BIOS data.
 548                  * However, it's in a different format from the BIOS
 549                  * data on chipsets with integrated LVDS (stored in AIM
 550                  * headers, likely), so for now, just get the current
 551                  * mode being output through DVO.
 552                  */
 553                 intel_panel_add_encoder_fixed_mode(connector, encoder);
 554
 555                 intel_panel_init(connector, NULL);
 556         }
 557 }