drivers/scsi/libsas/sas_expander.c

   1 // SPDX-License-Identifier: GPL-2.0
   2 /*
   3  * Serial Attached SCSI (SAS) Expander discovery and configuration
   4  *
   5  * Copyright (C) 2005 Adaptec, Inc.  All rights reserved.
   6  * Copyright (C) 2005 Luben Tuikov <[email protected]>
   7  *
   8  * This file is licensed under GPLv2.
   9  */
  10
  11 #include <linux/scatterlist.h>
  12 #include <linux/blkdev.h>
  13 #include <linux/slab.h>
  14 #include <asm/unaligned.h>
  15
  16 #include "sas_internal.h"
  17
  18 #include <scsi/sas_ata.h>
  19 #include <scsi/scsi_transport.h>
  20 #include <scsi/scsi_transport_sas.h>
  21 #include "scsi_sas_internal.h"
  22
  23 static int sas_discover_expander(struct domain_device *dev);
  24 static int sas_configure_routing(struct domain_device *dev, u8 *sas_addr);
  25 static int sas_configure_phy(struct domain_device *dev, int phy_id,
  26                              u8 *sas_addr, int include);
  27 static int sas_disable_routing(struct domain_device *dev,  u8 *sas_addr);
  28
  29 /* ---------- SMP task management ---------- */
  30
  31 /* Give it some long enough timeout. In seconds. */
  32 #define SMP_TIMEOUT 10
  33
  34 static int smp_execute_task_sg(struct domain_device *dev,
  35                 struct scatterlist *req, struct scatterlist *resp)
  36 {
  37         int res, retry;
  38         struct sas_task *task = NULL;
  39         struct sas_internal *i =
  40                 to_sas_internal(dev->port->ha->core.shost->transportt);
  41         struct sas_ha_struct *ha = dev->port->ha;
  42
  43         pm_runtime_get_sync(ha->dev);
  44         mutex_lock(&dev->ex_dev.cmd_mutex);
  45         for (retry = 0; retry < 3; retry++) {
  46                 if (test_bit(SAS_DEV_GONE, &dev->state)) {
  47                         res = -ECOMM;
  48                         break;
  49                 }
  50
  51                 task = sas_alloc_slow_task(GFP_KERNEL);
  52                 if (!task) {
  53                         res = -ENOMEM;
  54                         break;
  55                 }
  56                 task->dev = dev;
  57                 task->task_proto = dev->tproto;
  58                 task->smp_task.smp_req = *req;
  59                 task->smp_task.smp_resp = *resp;
  60
  61                 task->task_done = sas_task_internal_done;
  62
  63                 task->slow_task->timer.function = sas_task_internal_timedout;
  64                 task->slow_task->timer.expires = jiffies + SMP_TIMEOUT*HZ;
  65                 add_timer(&task->slow_task->timer);
  66
  67                 res = i->dft->lldd_execute_task(task, GFP_KERNEL);
  68
  69                 if (res) {
  70                         del_timer_sync(&task->slow_task->timer);
  71                         pr_notice("executing SMP task failed:%d\n", res);
  72                         break;
  73                 }
  74
  75                 wait_for_completion(&task->slow_task->completion);
  76                 res = -ECOMM;
  77                 if ((task->task_state_flags & SAS_TASK_STATE_ABORTED)) {
  78                         pr_notice("smp task timed out or aborted\n");
  79                         i->dft->lldd_abort_task(task);
  80                         if (!(task->task_state_flags & SAS_TASK_STATE_DONE)) {
  81                                 pr_notice("SMP task aborted and not done\n");
  82                                 break;
  83                         }
  84                 }
  85                 if (task->task_status.resp == SAS_TASK_COMPLETE &&
  86                     task->task_status.stat == SAS_SAM_STAT_GOOD) {
  87                         res = 0;
  88                         break;
  89                 }
  90                 if (task->task_status.resp == SAS_TASK_COMPLETE &&
  91                     task->task_status.stat == SAS_DATA_UNDERRUN) {
  92                         /* no error, but return the number of bytes of
  93                          * underrun */
  94                         res = task->task_status.residual;
  95                         break;
  96                 }
  97                 if (task->task_status.resp == SAS_TASK_COMPLETE &&
  98                     task->task_status.stat == SAS_DATA_OVERRUN) {
  99                         res = -EMSGSIZE;
 100                         break;
 101                 }
 102                 if (task->task_status.resp == SAS_TASK_UNDELIVERED &&
 103                     task->task_status.stat == SAS_DEVICE_UNKNOWN)
 104                         break;
 105                 else {
 106                         pr_notice("%s: task to dev %016llx response: 0x%x status 0x%x\n",
 107                                   __func__,
 108                                   SAS_ADDR(dev->sas_addr),
 109                                   task->task_status.resp,
 110                                   task->task_status.stat);
 111                         sas_free_task(task);
 112                         task = NULL;
 113                 }
 114         }
 115         mutex_unlock(&dev->ex_dev.cmd_mutex);
 116         pm_runtime_put_sync(ha->dev);
 117
 118         BUG_ON(retry == 3 && task != NULL);
 119         sas_free_task(task);
 120         return res;
 121 }
 122
 123 static int smp_execute_task(struct domain_device *dev, void *req, int req_size,
 124                             void *resp, int resp_size)
 125 {
 126         struct scatterlist req_sg;
 127         struct scatterlist resp_sg;
 128
 129         sg_init_one(&req_sg, req, req_size);
 130         sg_init_one(&resp_sg, resp, resp_size);
 131         return smp_execute_task_sg(dev, &req_sg, &resp_sg);
 132 }
 133
 134 /* ---------- Allocations ---------- */
 135
 136 static inline void *alloc_smp_req(int size)
 137 {
 138         u8 *p = kzalloc(size, GFP_KERNEL);
 139         if (p)
 140                 p[0] = SMP_REQUEST;
 141         return p;
 142 }
 143
 144 static inline void *alloc_smp_resp(int size)
 145 {
 146         return kzalloc(size, GFP_KERNEL);
 147 }
 148
 149 static char sas_route_char(struct domain_device *dev, struct ex_phy *phy)
 150 {
 151         switch (phy->routing_attr) {
 152         case TABLE_ROUTING:
 153                 if (dev->ex_dev.t2t_supp)
 154                         return 'U';
 155                 else
 156                         return 'T';
 157         case DIRECT_ROUTING:
 158                 return 'D';
 159         case SUBTRACTIVE_ROUTING:
 160                 return 'S';
 161         default:
 162                 return '?';
 163         }
 164 }
 165
 166 static enum sas_device_type to_dev_type(struct discover_resp *dr)
 167 {
 168         /* This is detecting a failure to transmit initial dev to host
 169          * FIS as described in section J.5 of sas-2 r16
 170          */
 171         if (dr->attached_dev_type == SAS_PHY_UNUSED && dr->attached_sata_dev &&
 172             dr->linkrate >= SAS_LINK_RATE_1_5_GBPS)
 173                 return SAS_SATA_PENDING;
 174         else
 175                 return dr->attached_dev_type;
 176 }
 177
 178 static void sas_set_ex_phy(struct domain_device *dev, int phy_id,
 179                            struct smp_disc_resp *disc_resp)
 180 {
 181         enum sas_device_type dev_type;
 182         enum sas_linkrate linkrate;
 183         u8 sas_addr[SAS_ADDR_SIZE];
 184         struct discover_resp *dr = &disc_resp->disc;
 185         struct sas_ha_struct *ha = dev->port->ha;
 186         struct expander_device *ex = &dev->ex_dev;
 187         struct ex_phy *phy = &ex->ex_phy[phy_id];
 188         struct sas_rphy *rphy = dev->rphy;
 189         bool new_phy = !phy->phy;
 190         char *type;
 191
 192         if (new_phy) {
 193                 if (WARN_ON_ONCE(test_bit(SAS_HA_ATA_EH_ACTIVE, &ha->state)))
 194                         return;
 195                 phy->phy = sas_phy_alloc(&rphy->dev, phy_id);
 196
 197                 /* FIXME: error_handling */
 198                 BUG_ON(!phy->phy);
 199         }
 200
 201         switch (disc_resp->result) {
 202         case SMP_RESP_PHY_VACANT:
 203                 phy->phy_state = PHY_VACANT;
 204                 break;
 205         default:
 206                 phy->phy_state = PHY_NOT_PRESENT;
 207                 break;
 208         case SMP_RESP_FUNC_ACC:
 209                 phy->phy_state = PHY_EMPTY; /* do not know yet */
 210                 break;
 211         }
 212
 213         /* check if anything important changed to squelch debug */
 214         dev_type = phy->attached_dev_type;
 215         linkrate  = phy->linkrate;
 216         memcpy(sas_addr, phy->attached_sas_addr, SAS_ADDR_SIZE);
 217
 218         /* Handle vacant phy - rest of dr data is not valid so skip it */
 219         if (phy->phy_state == PHY_VACANT) {
 220                 memset(phy->attached_sas_addr, 0, SAS_ADDR_SIZE);
 221                 phy->attached_dev_type = SAS_PHY_UNUSED;
 222                 if (!test_bit(SAS_HA_ATA_EH_ACTIVE, &ha->state)) {
 223                         phy->phy_id = phy_id;
 224                         goto skip;
 225                 } else
 226                         goto out;
 227         }
 228
 229         phy->attached_dev_type = to_dev_type(dr);
 230         if (test_bit(SAS_HA_ATA_EH_ACTIVE, &ha->state))
 231                 goto out;
 232         phy->phy_id = phy_id;
 233         phy->linkrate = dr->linkrate;
 234         phy->attached_sata_host = dr->attached_sata_host;
 235         phy->attached_sata_dev  = dr->attached_sata_dev;
 236         phy->attached_sata_ps   = dr->attached_sata_ps;
 237         phy->attached_iproto = dr->iproto << 1;
 238         phy->attached_tproto = dr->tproto << 1;
 239         /* help some expanders that fail to zero sas_address in the 'no
 240          * device' case
 241          */
 242         if (phy->attached_dev_type == SAS_PHY_UNUSED ||
 243             phy->linkrate < SAS_LINK_RATE_1_5_GBPS)
 244                 memset(phy->attached_sas_addr, 0, SAS_ADDR_SIZE);
 245         else
 246                 memcpy(phy->attached_sas_addr, dr->attached_sas_addr, SAS_ADDR_SIZE);
 247         phy->attached_phy_id = dr->attached_phy_id;
 248         phy->phy_change_count = dr->change_count;
 249         phy->routing_attr = dr->routing_attr;
 250         phy->virtual = dr->virtual;
 251         phy->last_da_index = -1;
 252
 253         phy->phy->identify.sas_address = SAS_ADDR(phy->attached_sas_addr);
 254         phy->phy->identify.device_type = dr->attached_dev_type;
 255         phy->phy->identify.initiator_port_protocols = phy->attached_iproto;
 256         phy->phy->identify.target_port_protocols = phy->attached_tproto;
 257         if (!phy->attached_tproto && dr->attached_sata_dev)
 258                 phy->phy->identify.target_port_protocols = SAS_PROTOCOL_SATA;
 259         phy->phy->identify.phy_identifier = phy_id;
 260         phy->phy->minimum_linkrate_hw = dr->hmin_linkrate;
 261         phy->phy->maximum_linkrate_hw = dr->hmax_linkrate;
 262         phy->phy->minimum_linkrate = dr->pmin_linkrate;
 263         phy->phy->maximum_linkrate = dr->pmax_linkrate;
 264         phy->phy->negotiated_linkrate = phy->linkrate;
 265         phy->phy->enabled = (phy->linkrate != SAS_PHY_DISABLED);
 266
 267  skip:
 268         if (new_phy)
 269                 if (sas_phy_add(phy->phy)) {
 270                         sas_phy_free(phy->phy);
 271                         return;
 272                 }
 273
 274  out:
 275         switch (phy->attached_dev_type) {
 276         case SAS_SATA_PENDING:
 277                 type = "stp pending";
 278                 break;
 279         case SAS_PHY_UNUSED:
 280                 type = "no device";
 281                 break;
 282         case SAS_END_DEVICE:
 283                 if (phy->attached_iproto) {
 284                         if (phy->attached_tproto)
 285                                 type = "host+target";
 286                         else
 287                                 type = "host";
 288                 } else {
 289                         if (dr->attached_sata_dev)
 290                                 type = "stp";
 291                         else
 292                                 type = "ssp";
 293                 }
 294                 break;
 295         case SAS_EDGE_EXPANDER_DEVICE:
 296         case SAS_FANOUT_EXPANDER_DEVICE:
 297                 type = "smp";
 298                 break;
 299         default:
 300                 type = "unknown";
 301         }
 302
 303         /* this routine is polled by libata error recovery so filter
 304          * unimportant messages
 305          */
 306         if (new_phy || phy->attached_dev_type != dev_type ||
 307             phy->linkrate != linkrate ||
 308             SAS_ADDR(phy->attached_sas_addr) != SAS_ADDR(sas_addr))
 309                 /* pass */;
 310         else
 311                 return;
 312
 313         /* if the attached device type changed and ata_eh is active,
 314          * make sure we run revalidation when eh completes (see:
 315          * sas_enable_revalidation)
 316          */
 317         if (test_bit(SAS_HA_ATA_EH_ACTIVE, &ha->state))
 318                 set_bit(DISCE_REVALIDATE_DOMAIN, &dev->port->disc.pending);
 319
 320         pr_debug("%sex %016llx phy%02d:%c:%X attached: %016llx (%s)\n",
 321                  test_bit(SAS_HA_ATA_EH_ACTIVE, &ha->state) ? "ata: " : "",
 322                  SAS_ADDR(dev->sas_addr), phy->phy_id,
 323                  sas_route_char(dev, phy), phy->linkrate,
 324                  SAS_ADDR(phy->attached_sas_addr), type);
 325 }
 326
 327 /* check if we have an existing attached ata device on this expander phy */
 328 struct domain_device *sas_ex_to_ata(struct domain_device *ex_dev, int phy_id)
 329 {
 330         struct ex_phy *ex_phy = &ex_dev->ex_dev.ex_phy[phy_id];
 331         struct domain_device *dev;
 332         struct sas_rphy *rphy;
 333
 334         if (!ex_phy->port)
 335                 return NULL;
 336
 337         rphy = ex_phy->port->rphy;
 338         if (!rphy)
 339                 return NULL;
 340
 341         dev = sas_find_dev_by_rphy(rphy);
 342
 343         if (dev && dev_is_sata(dev))
 344                 return dev;
 345
 346         return NULL;
 347 }
 348
 349 #define DISCOVER_REQ_SIZE  16
 350 #define DISCOVER_RESP_SIZE sizeof(struct smp_disc_resp)
 351
 352 static int sas_ex_phy_discover_helper(struct domain_device *dev, u8 *disc_req,
 353                                       struct smp_disc_resp *disc_resp,
 354                                       int single)
 355 {
 356         struct discover_resp *dr = &disc_resp->disc;
 357         int res;
 358
 359         disc_req[9] = single;
 360
 361         res = smp_execute_task(dev, disc_req, DISCOVER_REQ_SIZE,
 362                                disc_resp, DISCOVER_RESP_SIZE);
 363         if (res)
 364                 return res;
 365         if (memcmp(dev->sas_addr, dr->attached_sas_addr, SAS_ADDR_SIZE) == 0) {
 366                 pr_notice("Found loopback topology, just ignore it!\n");
 367                 return 0;
 368         }
 369         sas_set_ex_phy(dev, single, disc_resp);
 370         return 0;
 371 }
 372
 373 int sas_ex_phy_discover(struct domain_device *dev, int single)
 374 {
 375         struct expander_device *ex = &dev->ex_dev;
 376         int  res = 0;
 377         u8   *disc_req;
 378         struct smp_disc_resp *disc_resp;
 379
 380         disc_req = alloc_smp_req(DISCOVER_REQ_SIZE);
 381         if (!disc_req)
 382                 return -ENOMEM;
 383
 384         disc_resp = alloc_smp_resp(DISCOVER_RESP_SIZE);
 385         if (!disc_resp) {
 386                 kfree(disc_req);
 387                 return -ENOMEM;
 388         }
 389
 390         disc_req[1] = SMP_DISCOVER;
 391
 392         if (0 <= single && single < ex->num_phys) {
 393                 res = sas_ex_phy_discover_helper(dev, disc_req, disc_resp, single);
 394         } else {
 395                 int i;
 396
 397                 for (i = 0; i < ex->num_phys; i++) {
 398                         res = sas_ex_phy_discover_helper(dev, disc_req,
 399                                                          disc_resp, i);
 400                         if (res)
 401                                 goto out_err;
 402                 }
 403         }
 404 out_err:
 405         kfree(disc_resp);
 406         kfree(disc_req);
 407         return res;
 408 }
 409
 410 static int sas_expander_discover(struct domain_device *dev)
 411 {
 412         struct expander_device *ex = &dev->ex_dev;
 413         int res;
 414
 415         ex->ex_phy = kcalloc(ex->num_phys, sizeof(*ex->ex_phy), GFP_KERNEL);
 416         if (!ex->ex_phy)
 417                 return -ENOMEM;
 418
 419         res = sas_ex_phy_discover(dev, -1);
 420         if (res)
 421                 goto out_err;
 422
 423         return 0;
 424  out_err:
 425         kfree(ex->ex_phy);
 426         ex->ex_phy = NULL;
 427         return res;
 428 }
 429
 430 #define MAX_EXPANDER_PHYS 128
 431
 432 #define RG_REQ_SIZE   8
 433 #define RG_RESP_SIZE  sizeof(struct smp_rg_resp)
 434
 435 static int sas_ex_general(struct domain_device *dev)
 436 {
 437         u8 *rg_req;
 438         struct smp_rg_resp *rg_resp;
 439         struct report_general_resp *rg;
 440         int res;
 441         int i;
 442
 443         rg_req = alloc_smp_req(RG_REQ_SIZE);
 444         if (!rg_req)
 445                 return -ENOMEM;
 446
 447         rg_resp = alloc_smp_resp(RG_RESP_SIZE);
 448         if (!rg_resp) {
 449                 kfree(rg_req);
 450                 return -ENOMEM;
 451         }
 452
 453         rg_req[1] = SMP_REPORT_GENERAL;
 454
 455         for (i = 0; i < 5; i++) {
 456                 res = smp_execute_task(dev, rg_req, RG_REQ_SIZE, rg_resp,
 457                                        RG_RESP_SIZE);
 458
 459                 if (res) {
 460                         pr_notice("RG to ex %016llx failed:0x%x\n",
 461                                   SAS_ADDR(dev->sas_addr), res);
 462                         goto out;
 463                 } else if (rg_resp->result != SMP_RESP_FUNC_ACC) {
 464                         pr_debug("RG:ex %016llx returned SMP result:0x%x\n",
 465                                  SAS_ADDR(dev->sas_addr), rg_resp->result);
 466                         res = rg_resp->result;
 467                         goto out;
 468                 }
 469
 470                 rg = &rg_resp->rg;
 471                 dev->ex_dev.ex_change_count = be16_to_cpu(rg->change_count);
 472                 dev->ex_dev.max_route_indexes = be16_to_cpu(rg->route_indexes);
 473                 dev->ex_dev.num_phys = min(rg->num_phys, (u8)MAX_EXPANDER_PHYS);
 474                 dev->ex_dev.t2t_supp = rg->t2t_supp;
 475                 dev->ex_dev.conf_route_table = rg->conf_route_table;
 476                 dev->ex_dev.configuring = rg->configuring;
 477                 memcpy(dev->ex_dev.enclosure_logical_id,
 478                        rg->enclosure_logical_id, 8);
 479
 480                 if (dev->ex_dev.configuring) {
 481                         pr_debug("RG: ex %016llx self-configuring...\n",
 482                                  SAS_ADDR(dev->sas_addr));
 483                         schedule_timeout_interruptible(5*HZ);
 484                 } else
 485                         break;
 486         }
 487 out:
 488         kfree(rg_req);
 489         kfree(rg_resp);
 490         return res;
 491 }
 492
 493 static void ex_assign_manuf_info(struct domain_device *dev, void
 494                                         *_mi_resp)
 495 {
 496         u8 *mi_resp = _mi_resp;
 497         struct sas_rphy *rphy = dev->rphy;
 498         struct sas_expander_device *edev = rphy_to_expander_device(rphy);
 499
 500         memcpy(edev->vendor_id, mi_resp + 12, SAS_EXPANDER_VENDOR_ID_LEN);
 501         memcpy(edev->product_id, mi_resp + 20, SAS_EXPANDER_PRODUCT_ID_LEN);
 502         memcpy(edev->product_rev, mi_resp + 36,
 503                SAS_EXPANDER_PRODUCT_REV_LEN);
 504
 505         if (mi_resp[8] & 1) {
 506                 memcpy(edev->component_vendor_id, mi_resp + 40,
 507                        SAS_EXPANDER_COMPONENT_VENDOR_ID_LEN);
 508                 edev->component_id = mi_resp[48] << 8 | mi_resp[49];
 509                 edev->component_revision_id = mi_resp[50];
 510         }
 511 }
 512
 513 #define MI_REQ_SIZE   8
 514 #define MI_RESP_SIZE 64
 515
 516 static int sas_ex_manuf_info(struct domain_device *dev)
 517 {
 518         u8 *mi_req;
 519         u8 *mi_resp;
 520         int res;
 521
 522         mi_req = alloc_smp_req(MI_REQ_SIZE);
 523         if (!mi_req)
 524                 return -ENOMEM;
 525
 526         mi_resp = alloc_smp_resp(MI_RESP_SIZE);
 527         if (!mi_resp) {
 528                 kfree(mi_req);
 529                 return -ENOMEM;
 530         }
 531
 532         mi_req[1] = SMP_REPORT_MANUF_INFO;
 533
 534         res = smp_execute_task(dev, mi_req, MI_REQ_SIZE, mi_resp, MI_RESP_SIZE);
 535         if (res) {
 536                 pr_notice("MI: ex %016llx failed:0x%x\n",
 537                           SAS_ADDR(dev->sas_addr), res);
 538                 goto out;
 539         } else if (mi_resp[2] != SMP_RESP_FUNC_ACC) {
 540                 pr_debug("MI ex %016llx returned SMP result:0x%x\n",
 541                          SAS_ADDR(dev->sas_addr), mi_resp[2]);
 542                 goto out;
 543         }
 544
 545         ex_assign_manuf_info(dev, mi_resp);
 546 out:
 547         kfree(mi_req);
 548         kfree(mi_resp);
 549         return res;
 550 }
 551
 552 #define PC_REQ_SIZE  44
 553 #define PC_RESP_SIZE 8
 554
 555 int sas_smp_phy_control(struct domain_device *dev, int phy_id,
 556                         enum phy_func phy_func,
 557                         struct sas_phy_linkrates *rates)
 558 {
 559         u8 *pc_req;
 560         u8 *pc_resp;
 561         int res;
 562
 563         pc_req = alloc_smp_req(PC_REQ_SIZE);
 564         if (!pc_req)
 565                 return -ENOMEM;
 566
 567         pc_resp = alloc_smp_resp(PC_RESP_SIZE);
 568         if (!pc_resp) {
 569                 kfree(pc_req);
 570                 return -ENOMEM;
 571         }
 572
 573         pc_req[1] = SMP_PHY_CONTROL;
 574         pc_req[9] = phy_id;
 575         pc_req[10] = phy_func;
 576         if (rates) {
 577                 pc_req[32] = rates->minimum_linkrate << 4;
 578                 pc_req[33] = rates->maximum_linkrate << 4;
 579         }
 580
 581         res = smp_execute_task(dev, pc_req, PC_REQ_SIZE, pc_resp, PC_RESP_SIZE);
 582         if (res) {
 583                 pr_err("ex %016llx phy%02d PHY control failed: %d\n",
 584                        SAS_ADDR(dev->sas_addr), phy_id, res);
 585         } else if (pc_resp[2] != SMP_RESP_FUNC_ACC) {
 586                 pr_err("ex %016llx phy%02d PHY control failed: function result 0x%x\n",
 587                        SAS_ADDR(dev->sas_addr), phy_id, pc_resp[2]);
 588                 res = pc_resp[2];
 589         }
 590         kfree(pc_resp);
 591         kfree(pc_req);
 592         return res;
 593 }
 594
 595 static void sas_ex_disable_phy(struct domain_device *dev, int phy_id)
 596 {
 597         struct expander_device *ex = &dev->ex_dev;
 598         struct ex_phy *phy = &ex->ex_phy[phy_id];
 599
 600         sas_smp_phy_control(dev, phy_id, PHY_FUNC_DISABLE, NULL);
 601         phy->linkrate = SAS_PHY_DISABLED;
 602 }
 603
 604 static void sas_ex_disable_port(struct domain_device *dev, u8 *sas_addr)
 605 {
 606         struct expander_device *ex = &dev->ex_dev;
 607         int i;
 608
 609         for (i = 0; i < ex->num_phys; i++) {
 610                 struct ex_phy *phy = &ex->ex_phy[i];
 611
 612                 if (phy->phy_state == PHY_VACANT ||
 613                     phy->phy_state == PHY_NOT_PRESENT)
 614                         continue;
 615
 616                 if (SAS_ADDR(phy->attached_sas_addr) == SAS_ADDR(sas_addr))
 617                         sas_ex_disable_phy(dev, i);
 618         }
 619 }
 620
 621 static int sas_dev_present_in_domain(struct asd_sas_port *port,
 622                                             u8 *sas_addr)
 623 {
 624         struct domain_device *dev;
 625
 626         if (SAS_ADDR(port->sas_addr) == SAS_ADDR(sas_addr))
 627                 return 1;
 628         list_for_each_entry(dev, &port->dev_list, dev_list_node) {
 629                 if (SAS_ADDR(dev->sas_addr) == SAS_ADDR(sas_addr))
 630                         return 1;
 631         }
 632         return 0;
 633 }
 634
 635 #define RPEL_REQ_SIZE   16
 636 #define RPEL_RESP_SIZE  32
 637 int sas_smp_get_phy_events(struct sas_phy *phy)
 638 {
 639         int res;
 640         u8 *req;
 641         u8 *resp;
 642         struct sas_rphy *rphy = dev_to_rphy(phy->dev.parent);
 643         struct domain_device *dev = sas_find_dev_by_rphy(rphy);
 644
 645         req = alloc_smp_req(RPEL_REQ_SIZE);
 646         if (!req)
 647                 return -ENOMEM;
 648
 649         resp = alloc_smp_resp(RPEL_RESP_SIZE);
 650         if (!resp) {
 651                 kfree(req);
 652                 return -ENOMEM;
 653         }
 654
 655         req[1] = SMP_REPORT_PHY_ERR_LOG;
 656         req[9] = phy->number;
 657
 658         res = smp_execute_task(dev, req, RPEL_REQ_SIZE,
 659                                resp, RPEL_RESP_SIZE);
 660
 661         if (res)
 662                 goto out;
 663
 664         phy->invalid_dword_count = get_unaligned_be32(&resp[12]);
 665         phy->running_disparity_error_count = get_unaligned_be32(&resp[16]);
 666         phy->loss_of_dword_sync_count = get_unaligned_be32(&resp[20]);
 667         phy->phy_reset_problem_count = get_unaligned_be32(&resp[24]);
 668
 669  out:
 670         kfree(req);
 671         kfree(resp);
 672         return res;
 673
 674 }
 675
 676 #ifdef CONFIG_SCSI_SAS_ATA
 677
 678 #define RPS_REQ_SIZE  16
 679 #define RPS_RESP_SIZE sizeof(struct smp_rps_resp)
 680
 681 int sas_get_report_phy_sata(struct domain_device *dev, int phy_id,
 682                             struct smp_rps_resp *rps_resp)
 683 {
 684         int res;
 685         u8 *rps_req = alloc_smp_req(RPS_REQ_SIZE);
 686         u8 *resp = (u8 *)rps_resp;
 687
 688         if (!rps_req)
 689                 return -ENOMEM;
 690
 691         rps_req[1] = SMP_REPORT_PHY_SATA;
 692         rps_req[9] = phy_id;
 693
 694         res = smp_execute_task(dev, rps_req, RPS_REQ_SIZE,
 695                                rps_resp, RPS_RESP_SIZE);
 696
 697         /* 0x34 is the FIS type for the D2H fis.  There's a potential
 698          * standards cockup here.  sas-2 explicitly specifies the FIS
 699          * should be encoded so that FIS type is in resp[24].
 700          * However, some expanders endian reverse this.  Undo the
 701          * reversal here */
 702         if (!res && resp[27] == 0x34 && resp[24] != 0x34) {
 703                 int i;
 704
 705                 for (i = 0; i < 5; i++) {
 706                         int j = 24 + (i*4);
 707                         u8 a, b;
 708                         a = resp[j + 0];
 709                         b = resp[j + 1];
 710                         resp[j + 0] = resp[j + 3];
 711                         resp[j + 1] = resp[j + 2];
 712                         resp[j + 2] = b;
 713                         resp[j + 3] = a;
 714                 }
 715         }
 716
 717         kfree(rps_req);
 718         return res;
 719 }
 720 #endif
 721
 722 static void sas_ex_get_linkrate(struct domain_device *parent,
 723                                        struct domain_device *child,
 724                                        struct ex_phy *parent_phy)
 725 {
 726         struct expander_device *parent_ex = &parent->ex_dev;
 727         struct sas_port *port;
 728         int i;
 729
 730         child->pathways = 0;
 731
 732         port = parent_phy->port;
 733
 734         for (i = 0; i < parent_ex->num_phys; i++) {
 735                 struct ex_phy *phy = &parent_ex->ex_phy[i];
 736
 737                 if (phy->phy_state == PHY_VACANT ||
 738                     phy->phy_state == PHY_NOT_PRESENT)
 739                         continue;
 740
 741                 if (sas_phy_match_dev_addr(child, phy)) {
 742                         child->min_linkrate = min(parent->min_linkrate,
 743                                                   phy->linkrate);
 744                         child->max_linkrate = max(parent->max_linkrate,
 745                                                   phy->linkrate);
 746                         child->pathways++;
 747                         sas_port_add_phy(port, phy->phy);
 748                 }
 749         }
 750         child->linkrate = min(parent_phy->linkrate, child->max_linkrate);
 751         child->pathways = min(child->pathways, parent->pathways);
 752 }
 753
 754 static int sas_ex_add_dev(struct domain_device *parent, struct ex_phy *phy,
 755                           struct domain_device *child, int phy_id)
 756 {
 757         struct sas_rphy *rphy;
 758         int res;
 759
 760         child->dev_type = SAS_END_DEVICE;
 761         rphy = sas_end_device_alloc(phy->port);
 762         if (!rphy)
 763                 return -ENOMEM;
 764
 765         child->tproto = phy->attached_tproto;
 766         sas_init_dev(child);
 767
 768         child->rphy = rphy;
 769         get_device(&rphy->dev);
 770         rphy->identify.phy_identifier = phy_id;
 771         sas_fill_in_rphy(child, rphy);
 772
 773         list_add_tail(&child->disco_list_node, &parent->port->disco_list);
 774
 775         res = sas_notify_lldd_dev_found(child);
 776         if (res) {
 777                 pr_notice("notify lldd for device %016llx at %016llx:%02d returned 0x%x\n",
 778                           SAS_ADDR(child->sas_addr),
 779                           SAS_ADDR(parent->sas_addr), phy_id, res);
 780                 sas_rphy_free(child->rphy);
 781                 list_del(&child->disco_list_node);
 782                 return res;
 783         }
 784
 785         return 0;
 786 }
 787
 788 static struct domain_device *sas_ex_discover_end_dev(
 789         struct domain_device *parent, int phy_id)
 790 {
 791         struct expander_device *parent_ex = &parent->ex_dev;
 792         struct ex_phy *phy = &parent_ex->ex_phy[phy_id];
 793         struct domain_device *child = NULL;
 794         int res;
 795
 796         if (phy->attached_sata_host || phy->attached_sata_ps)
 797                 return NULL;
 798
 799         child = sas_alloc_device();
 800         if (!child)
 801                 return NULL;
 802
 803         kref_get(&parent->kref);
 804         child->parent = parent;
 805         child->port   = parent->port;
 806         child->iproto = phy->attached_iproto;
 807         memcpy(child->sas_addr, phy->attached_sas_addr, SAS_ADDR_SIZE);
 808         sas_hash_addr(child->hashed_sas_addr, child->sas_addr);
 809         if (!phy->port) {
 810                 phy->port = sas_port_alloc(&parent->rphy->dev, phy_id);
 811                 if (unlikely(!phy->port))
 812                         goto out_err;
 813                 if (unlikely(sas_port_add(phy->port) != 0)) {
 814                         sas_port_free(phy->port);
 815                         goto out_err;
 816                 }
 817         }
 818         sas_ex_get_linkrate(parent, child, phy);
 819         sas_device_set_phy(child, phy->port);
 820
 821         if ((phy->attached_tproto & SAS_PROTOCOL_STP) || phy->attached_sata_dev) {
 822                 res = sas_ata_add_dev(parent, phy, child, phy_id);
 823         } else if (phy->attached_tproto & SAS_PROTOCOL_SSP) {
 824                 res = sas_ex_add_dev(parent, phy, child, phy_id);
 825         } else {
 826                 pr_notice("target proto 0x%x at %016llx:0x%x not handled\n",
 827                           phy->attached_tproto, SAS_ADDR(parent->sas_addr),
 828                           phy_id);
 829                 res = -ENODEV;
 830         }
 831
 832         if (res)
 833                 goto out_free;
 834
 835         list_add_tail(&child->siblings, &parent_ex->children);
 836         return child;
 837
 838  out_free:
 839         sas_port_delete(phy->port);
 840  out_err:
 841         phy->port = NULL;
 842         sas_put_device(child);
 843         return NULL;
 844 }
 845
 846 /* See if this phy is part of a wide port */
 847 static bool sas_ex_join_wide_port(struct domain_device *parent, int phy_id)
 848 {
 849         struct ex_phy *phy = &parent->ex_dev.ex_phy[phy_id];
 850         int i;
 851
 852         for (i = 0; i < parent->ex_dev.num_phys; i++) {
 853                 struct ex_phy *ephy = &parent->ex_dev.ex_phy[i];
 854
 855                 if (ephy == phy)
 856                         continue;
 857
 858                 if (!memcmp(phy->attached_sas_addr, ephy->attached_sas_addr,
 859                             SAS_ADDR_SIZE) && ephy->port) {
 860                         sas_port_add_phy(ephy->port, phy->phy);
 861                         phy->port = ephy->port;
 862                         phy->phy_state = PHY_DEVICE_DISCOVERED;
 863                         return true;
 864                 }
 865         }
 866
 867         return false;
 868 }
 869
 870 static struct domain_device *sas_ex_discover_expander(
 871         struct domain_device *parent, int phy_id)
 872 {
 873         struct sas_expander_device *parent_ex = rphy_to_expander_device(parent->rphy);
 874         struct ex_phy *phy = &parent->ex_dev.ex_phy[phy_id];
 875         struct domain_device *child = NULL;
 876         struct sas_rphy *rphy;
 877         struct sas_expander_device *edev;
 878         struct asd_sas_port *port;
 879         int res;
 880
 881         if (phy->routing_attr == DIRECT_ROUTING) {
 882                 pr_warn("ex %016llx:%02d:D <--> ex %016llx:0x%x is not allowed\n",
 883                         SAS_ADDR(parent->sas_addr), phy_id,
 884                         SAS_ADDR(phy->attached_sas_addr),
 885                         phy->attached_phy_id);
 886                 return NULL;
 887         }
 888         child = sas_alloc_device();
 889         if (!child)
 890                 return NULL;
 891
 892         phy->port = sas_port_alloc(&parent->rphy->dev, phy_id);
 893         /* FIXME: better error handling */
 894         BUG_ON(sas_port_add(phy->port) != 0);
 895
 896
 897         switch (phy->attached_dev_type) {
 898         case SAS_EDGE_EXPANDER_DEVICE:
 899                 rphy = sas_expander_alloc(phy->port,
 900                                           SAS_EDGE_EXPANDER_DEVICE);
 901                 break;
 902         case SAS_FANOUT_EXPANDER_DEVICE:
 903                 rphy = sas_expander_alloc(phy->port,
 904                                           SAS_FANOUT_EXPANDER_DEVICE);
 905                 break;
 906         default:
 907                 rphy = NULL;    /* shut gcc up */
 908                 BUG();
 909         }
 910         port = parent->port;
 911         child->rphy = rphy;
 912         get_device(&rphy->dev);
 913         edev = rphy_to_expander_device(rphy);
 914         child->dev_type = phy->attached_dev_type;
 915         kref_get(&parent->kref);
 916         child->parent = parent;
 917         child->port = port;
 918         child->iproto = phy->attached_iproto;
 919         child->tproto = phy->attached_tproto;
 920         memcpy(child->sas_addr, phy->attached_sas_addr, SAS_ADDR_SIZE);
 921         sas_hash_addr(child->hashed_sas_addr, child->sas_addr);
 922         sas_ex_get_linkrate(parent, child, phy);
 923         edev->level = parent_ex->level + 1;
 924         parent->port->disc.max_level = max(parent->port->disc.max_level,
 925                                            edev->level);
 926         sas_init_dev(child);
 927         sas_fill_in_rphy(child, rphy);
 928         sas_rphy_add(rphy);
 929
 930         spin_lock_irq(&parent->port->dev_list_lock);
 931         list_add_tail(&child->dev_list_node, &parent->port->dev_list);
 932         spin_unlock_irq(&parent->port->dev_list_lock);
 933
 934         res = sas_discover_expander(child);
 935         if (res) {
 936                 sas_rphy_delete(rphy);
 937                 spin_lock_irq(&parent->port->dev_list_lock);
 938                 list_del(&child->dev_list_node);
 939                 spin_unlock_irq(&parent->port->dev_list_lock);
 940                 sas_put_device(child);
 941                 sas_port_delete(phy->port);
 942                 phy->port = NULL;
 943                 return NULL;
 944         }
 945         list_add_tail(&child->siblings, &parent->ex_dev.children);
 946         return child;
 947 }
 948
 949 static int sas_ex_discover_dev(struct domain_device *dev, int phy_id)
 950 {
 951         struct expander_device *ex = &dev->ex_dev;
 952         struct ex_phy *ex_phy = &ex->ex_phy[phy_id];
 953         struct domain_device *child = NULL;
 954         int res = 0;
 955
 956         /* Phy state */
 957         if (ex_phy->linkrate == SAS_SATA_SPINUP_HOLD) {
 958                 if (!sas_smp_phy_control(dev, phy_id, PHY_FUNC_LINK_RESET, NULL))
 959                         res = sas_ex_phy_discover(dev, phy_id);
 960                 if (res)
 961                         return res;
 962         }
 963
 964         /* Parent and domain coherency */
 965         if (!dev->parent && sas_phy_match_port_addr(dev->port, ex_phy)) {
 966                 sas_add_parent_port(dev, phy_id);
 967                 return 0;
 968         }
 969         if (dev->parent && sas_phy_match_dev_addr(dev->parent, ex_phy)) {
 970                 sas_add_parent_port(dev, phy_id);
 971                 if (ex_phy->routing_attr == TABLE_ROUTING)
 972                         sas_configure_phy(dev, phy_id, dev->port->sas_addr, 1);
 973                 return 0;
 974         }
 975
 976         if (sas_dev_present_in_domain(dev->port, ex_phy->attached_sas_addr))
 977                 sas_ex_disable_port(dev, ex_phy->attached_sas_addr);
 978
 979         if (ex_phy->attached_dev_type == SAS_PHY_UNUSED) {
 980                 if (ex_phy->routing_attr == DIRECT_ROUTING) {
 981                         memset(ex_phy->attached_sas_addr, 0, SAS_ADDR_SIZE);
 982                         sas_configure_routing(dev, ex_phy->attached_sas_addr);
 983                 }
 984                 return 0;
 985         } else if (ex_phy->linkrate == SAS_LINK_RATE_UNKNOWN)
 986                 return 0;
 987
 988         if (ex_phy->attached_dev_type != SAS_END_DEVICE &&
 989             ex_phy->attached_dev_type != SAS_FANOUT_EXPANDER_DEVICE &&
 990             ex_phy->attached_dev_type != SAS_EDGE_EXPANDER_DEVICE &&
 991             ex_phy->attached_dev_type != SAS_SATA_PENDING) {
 992                 pr_warn("unknown device type(0x%x) attached to ex %016llx phy%02d\n",
 993                         ex_phy->attached_dev_type,
 994                         SAS_ADDR(dev->sas_addr),
 995                         phy_id);
 996                 return 0;
 997         }
 998
 999         res = sas_configure_routing(dev, ex_phy->attached_sas_addr);
1000         if (res) {
1001                 pr_notice("configure routing for dev %016llx reported 0x%x. Forgotten\n",
1002                           SAS_ADDR(ex_phy->attached_sas_addr), res);
1003                 sas_disable_routing(dev, ex_phy->attached_sas_addr);
1004                 return res;
1005         }
1006
1007         if (sas_ex_join_wide_port(dev, phy_id)) {
1008                 pr_debug("Attaching ex phy%02d to wide port %016llx\n",
1009                          phy_id, SAS_ADDR(ex_phy->attached_sas_addr));
1010                 return res;
1011         }
1012
1013         switch (ex_phy->attached_dev_type) {
1014         case SAS_END_DEVICE:
1015         case SAS_SATA_PENDING:
1016                 child = sas_ex_discover_end_dev(dev, phy_id);
1017                 break;
1018         case SAS_FANOUT_EXPANDER_DEVICE:
1019                 if (SAS_ADDR(dev->port->disc.fanout_sas_addr)) {
1020                         pr_debug("second fanout expander %016llx phy%02d attached to ex %016llx phy%02d\n",
1021                                  SAS_ADDR(ex_phy->attached_sas_addr),
1022                                  ex_phy->attached_phy_id,
1023                                  SAS_ADDR(dev->sas_addr),
1024                                  phy_id);
1025                         sas_ex_disable_phy(dev, phy_id);
1026                         return res;
1027                 } else
1028                         memcpy(dev->port->disc.fanout_sas_addr,
1029                                ex_phy->attached_sas_addr, SAS_ADDR_SIZE);
1030                 fallthrough;
1031         case SAS_EDGE_EXPANDER_DEVICE:
1032                 child = sas_ex_discover_expander(dev, phy_id);
1033                 break;
1034         default:
1035                 break;
1036         }
1037
1038         if (!child)
1039                 pr_notice("ex %016llx phy%02d failed to discover\n",
1040                           SAS_ADDR(dev->sas_addr), phy_id);
1041         return res;
1042 }
1043
1044 static int sas_find_sub_addr(struct domain_device *dev, u8 *sub_addr)
1045 {
1046         struct expander_device *ex = &dev->ex_dev;
1047         int i;
1048
1049         for (i = 0; i < ex->num_phys; i++) {
1050                 struct ex_phy *phy = &ex->ex_phy[i];
1051
1052                 if (phy->phy_state == PHY_VACANT ||
1053                     phy->phy_state == PHY_NOT_PRESENT)
1054                         continue;
1055
1056                 if (dev_is_expander(phy->attached_dev_type) &&
1057                     phy->routing_attr == SUBTRACTIVE_ROUTING) {
1058
1059                         memcpy(sub_addr, phy->attached_sas_addr, SAS_ADDR_SIZE);
1060
1061                         return 1;
1062                 }
1063         }
1064         return 0;
1065 }
1066
1067 static int sas_check_level_subtractive_boundary(struct domain_device *dev)
1068 {
1069         struct expander_device *ex = &dev->ex_dev;
1070         struct domain_device *child;
1071         u8 sub_addr[SAS_ADDR_SIZE] = {0, };
1072
1073         list_for_each_entry(child, &ex->children, siblings) {
1074                 if (!dev_is_expander(child->dev_type))
1075                         continue;
1076                 if (sub_addr[0] == 0) {
1077                         sas_find_sub_addr(child, sub_addr);
1078                         continue;
1079                 } else {
1080                         u8 s2[SAS_ADDR_SIZE];
1081
1082                         if (sas_find_sub_addr(child, s2) &&
1083                             (SAS_ADDR(sub_addr) != SAS_ADDR(s2))) {
1084
1085                                 pr_notice("ex %016llx->%016llx-?->%016llx diverges from subtractive boundary %016llx\n",
1086                                           SAS_ADDR(dev->sas_addr),
1087                                           SAS_ADDR(child->sas_addr),
1088                                           SAS_ADDR(s2),
1089                                           SAS_ADDR(sub_addr));
1090
1091                                 sas_ex_disable_port(child, s2);
1092                         }
1093                 }
1094         }
1095         return 0;
1096 }
1097 /**
1098  * sas_ex_discover_devices - discover devices attached to this expander
1099  * @dev: pointer to the expander domain device
1100  * @single: if you want to do a single phy, else set to -1;
1101  *
1102  * Configure this expander for use with its devices and register the
1103  * devices of this expander.
1104  */
1105 static int sas_ex_discover_devices(struct domain_device *dev, int single)
1106 {
1107         struct expander_device *ex = &dev->ex_dev;
1108         int i = 0, end = ex->num_phys;
1109         int res = 0;
1110
1111         if (0 <= single && single < end) {
1112                 i = single;
1113                 end = i+1;
1114         }
1115
1116         for ( ; i < end; i++) {
1117                 struct ex_phy *ex_phy = &ex->ex_phy[i];
1118
1119                 if (ex_phy->phy_state == PHY_VACANT ||
1120                     ex_phy->phy_state == PHY_NOT_PRESENT ||
1121                     ex_phy->phy_state == PHY_DEVICE_DISCOVERED)
1122                         continue;
1123
1124                 switch (ex_phy->linkrate) {
1125                 case SAS_PHY_DISABLED:
1126                 case SAS_PHY_RESET_PROBLEM:
1127                 case SAS_SATA_PORT_SELECTOR:
1128                         continue;
1129                 default:
1130                         res = sas_ex_discover_dev(dev, i);
1131                         if (res)
1132                                 break;
1133                         continue;
1134                 }
1135         }
1136
1137         if (!res)
1138                 sas_check_level_subtractive_boundary(dev);
1139
1140         return res;
1141 }
1142
1143 static int sas_check_ex_subtractive_boundary(struct domain_device *dev)
1144 {
1145         struct expander_device *ex = &dev->ex_dev;
1146         int i;
1147         u8  *sub_sas_addr = NULL;
1148
1149         if (dev->dev_type != SAS_EDGE_EXPANDER_DEVICE)
1150                 return 0;
1151
1152         for (i = 0; i < ex->num_phys; i++) {
1153                 struct ex_phy *phy = &ex->ex_phy[i];
1154
1155                 if (phy->phy_state == PHY_VACANT ||
1156                     phy->phy_state == PHY_NOT_PRESENT)
1157                         continue;
1158
1159                 if (dev_is_expander(phy->attached_dev_type) &&
1160                     phy->routing_attr == SUBTRACTIVE_ROUTING) {
1161
1162                         if (!sub_sas_addr)
1163                                 sub_sas_addr = &phy->attached_sas_addr[0];
1164                         else if (SAS_ADDR(sub_sas_addr) !=
1165                                  SAS_ADDR(phy->attached_sas_addr)) {
1166
1167                                 pr_notice("ex %016llx phy%02d diverges(%016llx) on subtractive boundary(%016llx). Disabled\n",
1168                                           SAS_ADDR(dev->sas_addr), i,
1169                                           SAS_ADDR(phy->attached_sas_addr),
1170                                           SAS_ADDR(sub_sas_addr));
1171                                 sas_ex_disable_phy(dev, i);
1172                         }
1173                 }
1174         }
1175         return 0;
1176 }
1177
1178 static void sas_print_parent_topology_bug(struct domain_device *child,
1179                                                  struct ex_phy *parent_phy,
1180                                                  struct ex_phy *child_phy)
1181 {
1182         static const char *ex_type[] = {
1183                 [SAS_EDGE_EXPANDER_DEVICE] = "edge",
1184                 [SAS_FANOUT_EXPANDER_DEVICE] = "fanout",
1185         };
1186         struct domain_device *parent = child->parent;
1187
1188         pr_notice("%s ex %016llx phy%02d <--> %s ex %016llx phy%02d has %c:%c routing link!\n",
1189                   ex_type[parent->dev_type],
1190                   SAS_ADDR(parent->sas_addr),
1191                   parent_phy->phy_id,
1192
1193                   ex_type[child->dev_type],
1194                   SAS_ADDR(child->sas_addr),
1195                   child_phy->phy_id,
1196
1197                   sas_route_char(parent, parent_phy),
1198                   sas_route_char(child, child_phy));
1199 }
1200
1201 static int sas_check_eeds(struct domain_device *child,
1202                                  struct ex_phy *parent_phy,
1203                                  struct ex_phy *child_phy)
1204 {
1205         int res = 0;
1206         struct domain_device *parent = child->parent;
1207
1208         if (SAS_ADDR(parent->port->disc.fanout_sas_addr) != 0) {
1209                 res = -ENODEV;
1210                 pr_warn("edge ex %016llx phy S:%02d <--> edge ex %016llx phy S:%02d, while there is a fanout ex %016llx\n",
1211                         SAS_ADDR(parent->sas_addr),
1212                         parent_phy->phy_id,
1213                         SAS_ADDR(child->sas_addr),
1214                         child_phy->phy_id,
1215                         SAS_ADDR(parent->port->disc.fanout_sas_addr));
1216         } else if (SAS_ADDR(parent->port->disc.eeds_a) == 0) {
1217                 memcpy(parent->port->disc.eeds_a, parent->sas_addr,
1218                        SAS_ADDR_SIZE);
1219                 memcpy(parent->port->disc.eeds_b, child->sas_addr,
1220                        SAS_ADDR_SIZE);
1221         } else if (((SAS_ADDR(parent->port->disc.eeds_a) ==
1222                     SAS_ADDR(parent->sas_addr)) ||
1223                    (SAS_ADDR(parent->port->disc.eeds_a) ==
1224                     SAS_ADDR(child->sas_addr)))
1225                    &&
1226                    ((SAS_ADDR(parent->port->disc.eeds_b) ==
1227                      SAS_ADDR(parent->sas_addr)) ||
1228                     (SAS_ADDR(parent->port->disc.eeds_b) ==
1229                      SAS_ADDR(child->sas_addr))))
1230                 ;
1231         else {
1232                 res = -ENODEV;
1233                 pr_warn("edge ex %016llx phy%02d <--> edge ex %016llx phy%02d link forms a third EEDS!\n",
1234                         SAS_ADDR(parent->sas_addr),
1235                         parent_phy->phy_id,
1236                         SAS_ADDR(child->sas_addr),
1237                         child_phy->phy_id);
1238         }
1239
1240         return res;
1241 }
1242
1243 /* Here we spill over 80 columns.  It is intentional.
1244  */
1245 static int sas_check_parent_topology(struct domain_device *child)
1246 {
1247         struct expander_device *child_ex = &child->ex_dev;
1248         struct expander_device *parent_ex;
1249         int i;
1250         int res = 0;
1251
1252         if (!child->parent)
1253                 return 0;
1254
1255         if (!dev_is_expander(child->parent->dev_type))
1256                 return 0;
1257
1258         parent_ex = &child->parent->ex_dev;
1259
1260         for (i = 0; i < parent_ex->num_phys; i++) {
1261                 struct ex_phy *parent_phy = &parent_ex->ex_phy[i];
1262                 struct ex_phy *child_phy;
1263
1264                 if (parent_phy->phy_state == PHY_VACANT ||
1265                     parent_phy->phy_state == PHY_NOT_PRESENT)
1266                         continue;
1267
1268                 if (!sas_phy_match_dev_addr(child, parent_phy))
1269                         continue;
1270
1271                 child_phy = &child_ex->ex_phy[parent_phy->attached_phy_id];
1272
1273                 switch (child->parent->dev_type) {
1274                 case SAS_EDGE_EXPANDER_DEVICE:
1275                         if (child->dev_type == SAS_FANOUT_EXPANDER_DEVICE) {
1276                                 if (parent_phy->routing_attr != SUBTRACTIVE_ROUTING ||
1277                                     child_phy->routing_attr != TABLE_ROUTING) {
1278                                         sas_print_parent_topology_bug(child, parent_phy, child_phy);
1279                                         res = -ENODEV;
1280                                 }
1281                         } else if (parent_phy->routing_attr == SUBTRACTIVE_ROUTING) {
1282                                 if (child_phy->routing_attr == SUBTRACTIVE_ROUTING) {
1283                                         res = sas_check_eeds(child, parent_phy, child_phy);
1284                                 } else if (child_phy->routing_attr != TABLE_ROUTING) {
1285                                         sas_print_parent_topology_bug(child, parent_phy, child_phy);
1286                                         res = -ENODEV;
1287                                 }
1288                         } else if (parent_phy->routing_attr == TABLE_ROUTING) {
1289                                 if (child_phy->routing_attr == SUBTRACTIVE_ROUTING ||
1290                                     (child_phy->routing_attr == TABLE_ROUTING &&
1291                                      child_ex->t2t_supp && parent_ex->t2t_supp)) {
1292                                         /* All good */;
1293                                 } else {
1294                                         sas_print_parent_topology_bug(child, parent_phy, child_phy);
1295                                         res = -ENODEV;
1296                                 }
1297                         }
1298                         break;
1299                 case SAS_FANOUT_EXPANDER_DEVICE:
1300                         if (parent_phy->routing_attr != TABLE_ROUTING ||
1301                             child_phy->routing_attr != SUBTRACTIVE_ROUTING) {
1302                                 sas_print_parent_topology_bug(child, parent_phy, child_phy);
1303                                 res = -ENODEV;
1304                         }
1305                         break;
1306                 default:
1307                         break;
1308                 }
1309         }
1310
1311         return res;
1312 }
1313
1314 #define RRI_REQ_SIZE  16
1315 #define RRI_RESP_SIZE 44
1316
1317 static int sas_configure_present(struct domain_device *dev, int phy_id,
1318                                  u8 *sas_addr, int *index, int *present)
1319 {
1320         int i, res = 0;
1321         struct expander_device *ex = &dev->ex_dev;
1322         struct ex_phy *phy = &ex->ex_phy[phy_id];
1323         u8 *rri_req;
1324         u8 *rri_resp;
1325
1326         *present = 0;
1327         *index = 0;
1328
1329         rri_req = alloc_smp_req(RRI_REQ_SIZE);
1330         if (!rri_req)
1331                 return -ENOMEM;
1332
1333         rri_resp = alloc_smp_resp(RRI_RESP_SIZE);
1334         if (!rri_resp) {
1335                 kfree(rri_req);
1336                 return -ENOMEM;
1337         }
1338
1339         rri_req[1] = SMP_REPORT_ROUTE_INFO;
1340         rri_req[9] = phy_id;
1341
1342         for (i = 0; i < ex->max_route_indexes ; i++) {
1343                 *(__be16 *)(rri_req+6) = cpu_to_be16(i);
1344                 res = smp_execute_task(dev, rri_req, RRI_REQ_SIZE, rri_resp,
1345                                        RRI_RESP_SIZE);
1346                 if (res)
1347                         goto out;
1348                 res = rri_resp[2];
1349                 if (res == SMP_RESP_NO_INDEX) {
1350                         pr_warn("overflow of indexes: dev %016llx phy%02d index 0x%x\n",
1351                                 SAS_ADDR(dev->sas_addr), phy_id, i);
1352                         goto out;
1353                 } else if (res != SMP_RESP_FUNC_ACC) {
1354                         pr_notice("%s: dev %016llx phy%02d index 0x%x result 0x%x\n",
1355                                   __func__, SAS_ADDR(dev->sas_addr), phy_id,
1356                                   i, res);
1357                         goto out;
1358                 }
1359                 if (SAS_ADDR(sas_addr) != 0) {
1360                         if (SAS_ADDR(rri_resp+16) == SAS_ADDR(sas_addr)) {
1361                                 *index = i;
1362                                 if ((rri_resp[12] & 0x80) == 0x80)
1363                                         *present = 0;
1364                                 else
1365                                         *present = 1;
1366                                 goto out;
1367                         } else if (SAS_ADDR(rri_resp+16) == 0) {
1368                                 *index = i;
1369                                 *present = 0;
1370                                 goto out;
1371                         }
1372                 } else if (SAS_ADDR(rri_resp+16) == 0 &&
1373                            phy->last_da_index < i) {
1374                         phy->last_da_index = i;
1375                         *index = i;
1376                         *present = 0;
1377                         goto out;
1378                 }
1379         }
1380         res = -1;
1381 out:
1382         kfree(rri_req);
1383         kfree(rri_resp);
1384         return res;
1385 }
1386
1387 #define CRI_REQ_SIZE  44
1388 #define CRI_RESP_SIZE  8
1389
1390 static int sas_configure_set(struct domain_device *dev, int phy_id,
1391                              u8 *sas_addr, int index, int include)
1392 {
1393         int res;
1394         u8 *cri_req;
1395         u8 *cri_resp;
1396
1397         cri_req = alloc_smp_req(CRI_REQ_SIZE);
1398         if (!cri_req)
1399                 return -ENOMEM;
1400
1401         cri_resp = alloc_smp_resp(CRI_RESP_SIZE);
1402         if (!cri_resp) {
1403                 kfree(cri_req);
1404                 return -ENOMEM;
1405         }
1406
1407         cri_req[1] = SMP_CONF_ROUTE_INFO;
1408         *(__be16 *)(cri_req+6) = cpu_to_be16(index);
1409         cri_req[9] = phy_id;
1410         if (SAS_ADDR(sas_addr) == 0 || !include)
1411                 cri_req[12] |= 0x80;
1412         memcpy(cri_req+16, sas_addr, SAS_ADDR_SIZE);
1413
1414         res = smp_execute_task(dev, cri_req, CRI_REQ_SIZE, cri_resp,
1415                                CRI_RESP_SIZE);
1416         if (res)
1417                 goto out;
1418         res = cri_resp[2];
1419         if (res == SMP_RESP_NO_INDEX) {
1420                 pr_warn("overflow of indexes: dev %016llx phy%02d index 0x%x\n",
1421                         SAS_ADDR(dev->sas_addr), phy_id, index);
1422         }
1423 out:
1424         kfree(cri_req);
1425         kfree(cri_resp);
1426         return res;
1427 }
1428
1429 static int sas_configure_phy(struct domain_device *dev, int phy_id,
1430                                     u8 *sas_addr, int include)
1431 {
1432         int index;
1433         int present;
1434         int res;
1435
1436         res = sas_configure_present(dev, phy_id, sas_addr, &index, &present);
1437         if (res)
1438                 return res;
1439         if (include ^ present)
1440                 return sas_configure_set(dev, phy_id, sas_addr, index,
1441                                          include);
1442
1443         return res;
1444 }
1445
1446 /**
1447  * sas_configure_parent - configure routing table of parent
1448  * @parent: parent expander
1449  * @child: child expander
1450  * @sas_addr: SAS port identifier of device directly attached to child
1451  * @include: whether or not to include @child in the expander routing table
1452  */
1453 static int sas_configure_parent(struct domain_device *parent,
1454                                 struct domain_device *child,
1455                                 u8 *sas_addr, int include)
1456 {
1457         struct expander_device *ex_parent = &parent->ex_dev;
1458         int res = 0;
1459         int i;
1460
1461         if (parent->parent) {
1462                 res = sas_configure_parent(parent->parent, parent, sas_addr,
1463                                            include);
1464                 if (res)
1465                         return res;
1466         }
1467
1468         if (ex_parent->conf_route_table == 0) {
1469                 pr_debug("ex %016llx has self-configuring routing table\n",
1470                          SAS_ADDR(parent->sas_addr));
1471                 return 0;
1472         }
1473
1474         for (i = 0; i < ex_parent->num_phys; i++) {
1475                 struct ex_phy *phy = &ex_parent->ex_phy[i];
1476
1477                 if ((phy->routing_attr == TABLE_ROUTING) &&
1478                     sas_phy_match_dev_addr(child, phy)) {
1479                         res = sas_configure_phy(parent, i, sas_addr, include);
1480                         if (res)
1481                                 return res;
1482                 }
1483         }
1484
1485         return res;
1486 }
1487
1488 /**
1489  * sas_configure_routing - configure routing
1490  * @dev: expander device
1491  * @sas_addr: port identifier of device directly attached to the expander device
1492  */
1493 static int sas_configure_routing(struct domain_device *dev, u8 *sas_addr)
1494 {
1495         if (dev->parent)
1496                 return sas_configure_parent(dev->parent, dev, sas_addr, 1);
1497         return 0;
1498 }
1499
1500 static int sas_disable_routing(struct domain_device *dev,  u8 *sas_addr)
1501 {
1502         if (dev->parent)
1503                 return sas_configure_parent(dev->parent, dev, sas_addr, 0);
1504         return 0;
1505 }
1506
1507 /**
1508  * sas_discover_expander - expander discovery
1509  * @dev: pointer to expander domain device
1510  *
1511  * See comment in sas_discover_sata().
1512  */
1513 static int sas_discover_expander(struct domain_device *dev)
1514 {
1515         int res;
1516
1517         res = sas_notify_lldd_dev_found(dev);
1518         if (res)
1519                 return res;
1520
1521         res = sas_ex_general(dev);
1522         if (res)
1523                 goto out_err;
1524         res = sas_ex_manuf_info(dev);
1525         if (res)
1526                 goto out_err;
1527
1528         res = sas_expander_discover(dev);
1529         if (res) {
1530                 pr_warn("expander %016llx discovery failed(0x%x)\n",
1531                         SAS_ADDR(dev->sas_addr), res);
1532                 goto out_err;
1533         }
1534
1535         sas_check_ex_subtractive_boundary(dev);
1536         res = sas_check_parent_topology(dev);
1537         if (res)
1538                 goto out_err;
1539         return 0;
1540 out_err:
1541         sas_notify_lldd_dev_gone(dev);
1542         return res;
1543 }
1544
1545 static int sas_ex_level_discovery(struct asd_sas_port *port, const int level)
1546 {
1547         int res = 0;
1548         struct domain_device *dev;
1549
1550         list_for_each_entry(dev, &port->dev_list, dev_list_node) {
1551                 if (dev_is_expander(dev->dev_type)) {
1552                         struct sas_expander_device *ex =
1553                                 rphy_to_expander_device(dev->rphy);
1554
1555                         if (level == ex->level)
1556                                 res = sas_ex_discover_devices(dev, -1);
1557                         else if (level > 0)
1558                                 res = sas_ex_discover_devices(port->port_dev, -1);
1559
1560                 }
1561         }
1562
1563         return res;
1564 }
1565
1566 static int sas_ex_bfs_disc(struct asd_sas_port *port)
1567 {
1568         int res;
1569         int level;
1570
1571         do {
1572                 level = port->disc.max_level;
1573                 res = sas_ex_level_discovery(port, level);
1574                 mb();
1575         } while (level < port->disc.max_level);
1576
1577         return res;
1578 }
1579
1580 int sas_discover_root_expander(struct domain_device *dev)
1581 {
1582         int res;
1583         struct sas_expander_device *ex = rphy_to_expander_device(dev->rphy);
1584
1585         res = sas_rphy_add(dev->rphy);
1586         if (res)
1587                 goto out_err;
1588
1589         ex->level = dev->port->disc.max_level; /* 0 */
1590         res = sas_discover_expander(dev);
1591         if (res)
1592                 goto out_err2;
1593
1594         sas_ex_bfs_disc(dev->port);
1595
1596         return res;
1597
1598 out_err2:
1599         sas_rphy_remove(dev->rphy);
1600 out_err:
1601         return res;
1602 }
1603
1604 /* ---------- Domain revalidation ---------- */
1605
1606 static int sas_get_phy_discover(struct domain_device *dev,
1607                                 int phy_id, struct smp_disc_resp *disc_resp)
1608 {
1609         int res;
1610         u8 *disc_req;
1611
1612         disc_req = alloc_smp_req(DISCOVER_REQ_SIZE);
1613         if (!disc_req)
1614                 return -ENOMEM;
1615
1616         disc_req[1] = SMP_DISCOVER;
1617         disc_req[9] = phy_id;
1618
1619         res = smp_execute_task(dev, disc_req, DISCOVER_REQ_SIZE,
1620                                disc_resp, DISCOVER_RESP_SIZE);
1621         if (res)
1622                 goto out;
1623         if (disc_resp->result != SMP_RESP_FUNC_ACC)
1624                 res = disc_resp->result;
1625 out:
1626         kfree(disc_req);
1627         return res;
1628 }
1629
1630 static int sas_get_phy_change_count(struct domain_device *dev,
1631                                     int phy_id, int *pcc)
1632 {
1633         int res;
1634         struct smp_disc_resp *disc_resp;
1635
1636         disc_resp = alloc_smp_resp(DISCOVER_RESP_SIZE);
1637         if (!disc_resp)
1638                 return -ENOMEM;
1639
1640         res = sas_get_phy_discover(dev, phy_id, disc_resp);
1641         if (!res)
1642                 *pcc = disc_resp->disc.change_count;
1643
1644         kfree(disc_resp);
1645         return res;
1646 }
1647
1648 int sas_get_phy_attached_dev(struct domain_device *dev, int phy_id,
1649                              u8 *sas_addr, enum sas_device_type *type)
1650 {
1651         int res;
1652         struct smp_disc_resp *disc_resp;
1653
1654         disc_resp = alloc_smp_resp(DISCOVER_RESP_SIZE);
1655         if (!disc_resp)
1656                 return -ENOMEM;
1657
1658         res = sas_get_phy_discover(dev, phy_id, disc_resp);
1659         if (res == 0) {
1660                 memcpy(sas_addr, disc_resp->disc.attached_sas_addr,
1661                        SAS_ADDR_SIZE);
1662                 *type = to_dev_type(&disc_resp->disc);
1663                 if (*type == 0)
1664                         memset(sas_addr, 0, SAS_ADDR_SIZE);
1665         }
1666         kfree(disc_resp);
1667         return res;
1668 }
1669
1670 static int sas_find_bcast_phy(struct domain_device *dev, int *phy_id,
1671                               int from_phy, bool update)
1672 {
1673         struct expander_device *ex = &dev->ex_dev;
1674         int res = 0;
1675         int i;
1676
1677         for (i = from_phy; i < ex->num_phys; i++) {
1678                 int phy_change_count = 0;
1679
1680                 res = sas_get_phy_change_count(dev, i, &phy_change_count);
1681                 switch (res) {
1682                 case SMP_RESP_PHY_VACANT:
1683                 case SMP_RESP_NO_PHY:
1684                         continue;
1685                 case SMP_RESP_FUNC_ACC:
1686                         break;
1687                 default:
1688                         return res;
1689                 }
1690
1691                 if (phy_change_count != ex->ex_phy[i].phy_change_count) {
1692                         if (update)
1693                                 ex->ex_phy[i].phy_change_count =
1694                                         phy_change_count;
1695                         *phy_id = i;
1696                         return 0;
1697                 }
1698         }
1699         return 0;
1700 }
1701
1702 static int sas_get_ex_change_count(struct domain_device *dev, int *ecc)
1703 {
1704         int res;
1705         u8  *rg_req;
1706         struct smp_rg_resp  *rg_resp;
1707
1708         rg_req = alloc_smp_req(RG_REQ_SIZE);
1709         if (!rg_req)
1710                 return -ENOMEM;
1711
1712         rg_resp = alloc_smp_resp(RG_RESP_SIZE);
1713         if (!rg_resp) {
1714                 kfree(rg_req);
1715                 return -ENOMEM;
1716         }
1717
1718         rg_req[1] = SMP_REPORT_GENERAL;
1719
1720         res = smp_execute_task(dev, rg_req, RG_REQ_SIZE, rg_resp,
1721                                RG_RESP_SIZE);
1722         if (res)
1723                 goto out;
1724         if (rg_resp->result != SMP_RESP_FUNC_ACC) {
1725                 res = rg_resp->result;
1726                 goto out;
1727         }
1728
1729         *ecc = be16_to_cpu(rg_resp->rg.change_count);
1730 out:
1731         kfree(rg_resp);
1732         kfree(rg_req);
1733         return res;
1734 }
1735 /**
1736  * sas_find_bcast_dev -  find the device issue BROADCAST(CHANGE).
1737  * @dev:domain device to be detect.
1738  * @src_dev: the device which originated BROADCAST(CHANGE).
1739  *
1740  * Add self-configuration expander support. Suppose two expander cascading,
1741  * when the first level expander is self-configuring, hotplug the disks in
1742  * second level expander, BROADCAST(CHANGE) will not only be originated
1743  * in the second level expander, but also be originated in the first level
1744  * expander (see SAS protocol SAS 2r-14, 7.11 for detail), it is to say,
1745  * expander changed count in two level expanders will all increment at least
1746  * once, but the phy which chang count has changed is the source device which
1747  * we concerned.
1748  */
1749
1750 static int sas_find_bcast_dev(struct domain_device *dev,
1751                               struct domain_device **src_dev)
1752 {
1753         struct expander_device *ex = &dev->ex_dev;
1754         int ex_change_count = -1;
1755         int phy_id = -1;
1756         int res;
1757         struct domain_device *ch;
1758
1759         res = sas_get_ex_change_count(dev, &ex_change_count);
1760         if (res)
1761                 goto out;
1762         if (ex_change_count != -1 && ex_change_count != ex->ex_change_count) {
1763                 /* Just detect if this expander phys phy change count changed,
1764                 * in order to determine if this expander originate BROADCAST,
1765                 * and do not update phy change count field in our structure.
1766                 */
1767                 res = sas_find_bcast_phy(dev, &phy_id, 0, false);
1768                 if (phy_id != -1) {
1769                         *src_dev = dev;
1770                         ex->ex_change_count = ex_change_count;
1771                         pr_info("ex %016llx phy%02d change count has changed\n",
1772                                 SAS_ADDR(dev->sas_addr), phy_id);
1773                         return res;
1774                 } else
1775                         pr_info("ex %016llx phys DID NOT change\n",
1776                                 SAS_ADDR(dev->sas_addr));
1777         }
1778         list_for_each_entry(ch, &ex->children, siblings) {
1779                 if (dev_is_expander(ch->dev_type)) {
1780                         res = sas_find_bcast_dev(ch, src_dev);
1781                         if (*src_dev)
1782                                 return res;
1783                 }
1784         }
1785 out:
1786         return res;
1787 }
1788
1789 static void sas_unregister_ex_tree(struct asd_sas_port *port, struct domain_device *dev)
1790 {
1791         struct expander_device *ex = &dev->ex_dev;
1792         struct domain_device *child, *n;
1793
1794         list_for_each_entry_safe(child, n, &ex->children, siblings) {
1795                 set_bit(SAS_DEV_GONE, &child->state);
1796                 if (dev_is_expander(child->dev_type))
1797                         sas_unregister_ex_tree(port, child);
1798                 else
1799                         sas_unregister_dev(port, child);
1800         }
1801         sas_unregister_dev(port, dev);
1802 }
1803
1804 static void sas_unregister_devs_sas_addr(struct domain_device *parent,
1805                                          int phy_id, bool last)
1806 {
1807         struct expander_device *ex_dev = &parent->ex_dev;
1808         struct ex_phy *phy = &ex_dev->ex_phy[phy_id];
1809         struct domain_device *child, *n, *found = NULL;
1810         if (last) {
1811                 list_for_each_entry_safe(child, n,
1812                         &ex_dev->children, siblings) {
1813                         if (sas_phy_match_dev_addr(child, phy)) {
1814                                 set_bit(SAS_DEV_GONE, &child->state);
1815                                 if (dev_is_expander(child->dev_type))
1816                                         sas_unregister_ex_tree(parent->port, child);
1817                                 else
1818                                         sas_unregister_dev(parent->port, child);
1819                                 found = child;
1820                                 break;
1821                         }
1822                 }
1823                 sas_disable_routing(parent, phy->attached_sas_addr);
1824         }
1825         memset(phy->attached_sas_addr, 0, SAS_ADDR_SIZE);
1826         if (phy->port) {
1827                 sas_port_delete_phy(phy->port, phy->phy);
1828                 sas_device_set_phy(found, phy->port);
1829                 if (phy->port->num_phys == 0)
1830                         list_add_tail(&phy->port->del_list,
1831                                 &parent->port->sas_port_del_list);
1832                 phy->port = NULL;
1833         }
1834 }
1835
1836 static int sas_discover_bfs_by_root_level(struct domain_device *root,
1837                                           const int level)
1838 {
1839         struct expander_device *ex_root = &root->ex_dev;
1840         struct domain_device *child;
1841         int res = 0;
1842
1843         list_for_each_entry(child, &ex_root->children, siblings) {
1844                 if (dev_is_expander(child->dev_type)) {
1845                         struct sas_expander_device *ex =
1846                                 rphy_to_expander_device(child->rphy);
1847
1848                         if (level > ex->level)
1849                                 res = sas_discover_bfs_by_root_level(child,
1850                                                                      level);
1851                         else if (level == ex->level)
1852                                 res = sas_ex_discover_devices(child, -1);
1853                 }
1854         }
1855         return res;
1856 }
1857
1858 static int sas_discover_bfs_by_root(struct domain_device *dev)
1859 {
1860         int res;
1861         struct sas_expander_device *ex = rphy_to_expander_device(dev->rphy);
1862         int level = ex->level+1;
1863
1864         res = sas_ex_discover_devices(dev, -1);
1865         if (res)
1866                 goto out;
1867         do {
1868                 res = sas_discover_bfs_by_root_level(dev, level);
1869                 mb();
1870                 level += 1;
1871         } while (level <= dev->port->disc.max_level);
1872 out:
1873         return res;
1874 }
1875
1876 static int sas_discover_new(struct domain_device *dev, int phy_id)
1877 {
1878         struct ex_phy *ex_phy = &dev->ex_dev.ex_phy[phy_id];
1879         struct domain_device *child;
1880         int res;
1881
1882         pr_debug("ex %016llx phy%02d new device attached\n",
1883                  SAS_ADDR(dev->sas_addr), phy_id);
1884         res = sas_ex_phy_discover(dev, phy_id);
1885         if (res)
1886                 return res;
1887
1888         if (sas_ex_join_wide_port(dev, phy_id))
1889                 return 0;
1890
1891         res = sas_ex_discover_devices(dev, phy_id);
1892         if (res)
1893                 return res;
1894         list_for_each_entry(child, &dev->ex_dev.children, siblings) {
1895                 if (sas_phy_match_dev_addr(child, ex_phy)) {
1896                         if (dev_is_expander(child->dev_type))
1897                                 res = sas_discover_bfs_by_root(child);
1898                         break;
1899                 }
1900         }
1901         return res;
1902 }
1903
1904 static bool dev_type_flutter(enum sas_device_type new, enum sas_device_type old)
1905 {
1906         if (old == new)
1907                 return true;
1908
1909         /* treat device directed resets as flutter, if we went
1910          * SAS_END_DEVICE to SAS_SATA_PENDING the link needs recovery
1911          */
1912         if ((old == SAS_SATA_PENDING && new == SAS_END_DEVICE) ||
1913             (old == SAS_END_DEVICE && new == SAS_SATA_PENDING))
1914                 return true;
1915
1916         return false;
1917 }
1918
1919 static int sas_rediscover_dev(struct domain_device *dev, int phy_id,
1920                               bool last, int sibling)
1921 {
1922         struct expander_device *ex = &dev->ex_dev;
1923         struct ex_phy *phy = &ex->ex_phy[phy_id];
1924         enum sas_device_type type = SAS_PHY_UNUSED;
1925         u8 sas_addr[SAS_ADDR_SIZE];
1926         char msg[80] = "";
1927         int res;
1928
1929         if (!last)
1930                 sprintf(msg, ", part of a wide port with phy%02d", sibling);
1931
1932         pr_debug("ex %016llx rediscovering phy%02d%s\n",
1933                  SAS_ADDR(dev->sas_addr), phy_id, msg);
1934
1935         memset(sas_addr, 0, SAS_ADDR_SIZE);
1936         res = sas_get_phy_attached_dev(dev, phy_id, sas_addr, &type);
1937         switch (res) {
1938         case SMP_RESP_NO_PHY:
1939                 phy->phy_state = PHY_NOT_PRESENT;
1940                 sas_unregister_devs_sas_addr(dev, phy_id, last);
1941                 return res;
1942         case SMP_RESP_PHY_VACANT:
1943                 phy->phy_state = PHY_VACANT;
1944                 sas_unregister_devs_sas_addr(dev, phy_id, last);
1945                 return res;
1946         case SMP_RESP_FUNC_ACC:
1947                 break;
1948         case -ECOMM:
1949                 break;
1950         default:
1951                 return res;
1952         }
1953
1954         if ((SAS_ADDR(sas_addr) == 0) || (res == -ECOMM)) {
1955                 phy->phy_state = PHY_EMPTY;
1956                 sas_unregister_devs_sas_addr(dev, phy_id, last);
1957                 /*
1958                  * Even though the PHY is empty, for convenience we discover
1959                  * the PHY to update the PHY info, like negotiated linkrate.
1960                  */
1961                 sas_ex_phy_discover(dev, phy_id);
1962                 return res;
1963         } else if (SAS_ADDR(sas_addr) == SAS_ADDR(phy->attached_sas_addr) &&
1964                    dev_type_flutter(type, phy->attached_dev_type)) {
1965                 struct domain_device *ata_dev = sas_ex_to_ata(dev, phy_id);
1966                 char *action = "";
1967
1968                 sas_ex_phy_discover(dev, phy_id);
1969
1970                 if (ata_dev && phy->attached_dev_type == SAS_SATA_PENDING)
1971                         action = ", needs recovery";
1972                 pr_debug("ex %016llx phy%02d broadcast flutter%s\n",
1973                          SAS_ADDR(dev->sas_addr), phy_id, action);
1974                 return res;
1975         }
1976
1977         /* we always have to delete the old device when we went here */
1978         pr_info("ex %016llx phy%02d replace %016llx\n",
1979                 SAS_ADDR(dev->sas_addr), phy_id,
1980                 SAS_ADDR(phy->attached_sas_addr));
1981         sas_unregister_devs_sas_addr(dev, phy_id, last);
1982
1983         return sas_discover_new(dev, phy_id);
1984 }
1985
1986 /**
1987  * sas_rediscover - revalidate the domain.
1988  * @dev:domain device to be detect.
1989  * @phy_id: the phy id will be detected.
1990  *
1991  * NOTE: this process _must_ quit (return) as soon as any connection
1992  * errors are encountered.  Connection recovery is done elsewhere.
1993  * Discover process only interrogates devices in order to discover the
1994  * domain.For plugging out, we un-register the device only when it is
1995  * the last phy in the port, for other phys in this port, we just delete it
1996  * from the port.For inserting, we do discovery when it is the
1997  * first phy,for other phys in this port, we add it to the port to
1998  * forming the wide-port.
1999  */
2000 static int sas_rediscover(struct domain_device *dev, const int phy_id)
2001 {
2002         struct expander_device *ex = &dev->ex_dev;
2003         struct ex_phy *changed_phy = &ex->ex_phy[phy_id];
2004         int res = 0;
2005         int i;
2006         bool last = true;       /* is this the last phy of the port */
2007
2008         pr_debug("ex %016llx phy%02d originated BROADCAST(CHANGE)\n",
2009                  SAS_ADDR(dev->sas_addr), phy_id);
2010
2011         if (SAS_ADDR(changed_phy->attached_sas_addr) != 0) {
2012                 for (i = 0; i < ex->num_phys; i++) {
2013                         struct ex_phy *phy = &ex->ex_phy[i];
2014
2015                         if (i == phy_id)
2016                                 continue;
2017                         if (sas_phy_addr_match(phy, changed_phy)) {
2018                                 last = false;
2019                                 break;
2020                         }
2021                 }
2022                 res = sas_rediscover_dev(dev, phy_id, last, i);
2023         } else
2024                 res = sas_discover_new(dev, phy_id);
2025         return res;
2026 }
2027
2028 /**
2029  * sas_ex_revalidate_domain - revalidate the domain
2030  * @port_dev: port domain device.
2031  *
2032  * NOTE: this process _must_ quit (return) as soon as any connection
2033  * errors are encountered.  Connection recovery is done elsewhere.
2034  * Discover process only interrogates devices in order to discover the
2035  * domain.
2036  */
2037 int sas_ex_revalidate_domain(struct domain_device *port_dev)
2038 {
2039         int res;
2040         struct domain_device *dev = NULL;
2041
2042         res = sas_find_bcast_dev(port_dev, &dev);
2043         if (res == 0 && dev) {
2044                 struct expander_device *ex = &dev->ex_dev;
2045                 int i = 0, phy_id;
2046
2047                 do {
2048                         phy_id = -1;
2049                         res = sas_find_bcast_phy(dev, &phy_id, i, true);
2050                         if (phy_id == -1)
2051                                 break;
2052                         res = sas_rediscover(dev, phy_id);
2053                         i = phy_id + 1;
2054                 } while (i < ex->num_phys);
2055         }
2056         return res;
2057 }
2058
2059 int sas_find_attached_phy_id(struct expander_device *ex_dev,
2060                              struct domain_device *dev)
2061 {
2062         struct ex_phy *phy;
2063         int phy_id;
2064
2065         for (phy_id = 0; phy_id < ex_dev->num_phys; phy_id++) {
2066                 phy = &ex_dev->ex_phy[phy_id];
2067                 if (sas_phy_match_dev_addr(dev, phy))
2068                         return phy_id;
2069         }
2070
2071         return -ENODEV;
2072 }
2073 EXPORT_SYMBOL_GPL(sas_find_attached_phy_id);
2074
2075 void sas_smp_handler(struct bsg_job *job, struct Scsi_Host *shost,
2076                 struct sas_rphy *rphy)
2077 {
2078         struct domain_device *dev;
2079         unsigned int rcvlen = 0;
2080         int ret = -EINVAL;
2081
2082         /* no rphy means no smp target support (ie aic94xx host) */
2083         if (!rphy)
2084                 return sas_smp_host_handler(job, shost);
2085
2086         switch (rphy->identify.device_type) {
2087         case SAS_EDGE_EXPANDER_DEVICE:
2088         case SAS_FANOUT_EXPANDER_DEVICE:
2089                 break;
2090         default:
2091                 pr_err("%s: can we send a smp request to a device?\n",
2092                        __func__);
2093                 goto out;
2094         }
2095
2096         dev = sas_find_dev_by_rphy(rphy);
2097         if (!dev) {
2098                 pr_err("%s: fail to find a domain_device?\n", __func__);
2099                 goto out;
2100         }
2101
2102         /* do we need to support multiple segments? */
2103         if (job->request_payload.sg_cnt > 1 ||
2104             job->reply_payload.sg_cnt > 1) {
2105                 pr_info("%s: multiple segments req %u, rsp %u\n",
2106                         __func__, job->request_payload.payload_len,
2107                         job->reply_payload.payload_len);
2108                 goto out;
2109         }
2110
2111         ret = smp_execute_task_sg(dev, job->request_payload.sg_list,
2112                         job->reply_payload.sg_list);
2113         if (ret >= 0) {
2114                 /* bsg_job_done() requires the length received  */
2115                 rcvlen = job->reply_payload.payload_len - ret;
2116                 ret = 0;
2117         }
2118
2119 out:
2120         bsg_job_done(job, ret, rcvlen);
2121 }