]> Git Repo - linux.git/blob - drivers/platform/x86/intel/int0002_vgpio.c
efi: efivars: Fix variable writes without query_variable_store()
[linux.git] / drivers / platform / x86 / intel / int0002_vgpio.c
1 // SPDX-License-Identifier: GPL-2.0
2 /*
3  * Intel INT0002 "Virtual GPIO" driver
4  *
5  * Copyright (C) 2017 Hans de Goede <[email protected]>
6  *
7  * Loosely based on android x86 kernel code which is:
8  *
9  * Copyright (c) 2014, Intel Corporation.
10  *
11  * Author: Dyut Kumar Sil <[email protected]>
12  *
13  * Some peripherals on Bay Trail and Cherry Trail platforms signal a Power
14  * Management Event (PME) to the Power Management Controller (PMC) to wakeup
15  * the system. When this happens software needs to clear the PME bus 0 status
16  * bit in the GPE0a_STS register to avoid an IRQ storm on IRQ 9.
17  *
18  * This is modelled in ACPI through the INT0002 ACPI device, which is
19  * called a "Virtual GPIO controller" in ACPI because it defines the event
20  * handler to call when the PME triggers through _AEI and _L02 / _E02
21  * methods as would be done for a real GPIO interrupt in ACPI. Note this
22  * is a hack to define an AML event handler for the PME while using existing
23  * ACPI mechanisms, this is not a real GPIO at all.
24  *
25  * This driver will bind to the INT0002 device, and register as a GPIO
26  * controller, letting gpiolib-acpi.c call the _L02 handler as it would
27  * for a real GPIO controller.
28  */
29
30 #include <linux/acpi.h>
31 #include <linux/bitmap.h>
32 #include <linux/gpio/driver.h>
33 #include <linux/interrupt.h>
34 #include <linux/io.h>
35 #include <linux/kernel.h>
36 #include <linux/module.h>
37 #include <linux/platform_data/x86/soc.h>
38 #include <linux/platform_device.h>
39 #include <linux/slab.h>
40 #include <linux/suspend.h>
41
42 #define DRV_NAME                        "INT0002 Virtual GPIO"
43
44 /* For some reason the virtual GPIO pin tied to the GPE is numbered pin 2 */
45 #define GPE0A_PME_B0_VIRT_GPIO_PIN      2
46
47 #define GPE0A_PME_B0_STS_BIT            BIT(13)
48 #define GPE0A_PME_B0_EN_BIT             BIT(13)
49 #define GPE0A_STS_PORT                  0x420
50 #define GPE0A_EN_PORT                   0x428
51
52 struct int0002_data {
53         struct gpio_chip chip;
54         int parent_irq;
55         int wake_enable_count;
56 };
57
58 /*
59  * As this is not a real GPIO at all, but just a hack to model an event in
60  * ACPI the get / set functions are dummy functions.
61  */
62
63 static int int0002_gpio_get(struct gpio_chip *chip, unsigned int offset)
64 {
65         return 0;
66 }
67
68 static void int0002_gpio_set(struct gpio_chip *chip, unsigned int offset,
69                              int value)
70 {
71 }
72
73 static int int0002_gpio_direction_output(struct gpio_chip *chip,
74                                          unsigned int offset, int value)
75 {
76         return 0;
77 }
78
79 static void int0002_irq_ack(struct irq_data *data)
80 {
81         outl(GPE0A_PME_B0_STS_BIT, GPE0A_STS_PORT);
82 }
83
84 static void int0002_irq_unmask(struct irq_data *data)
85 {
86         u32 gpe_en_reg;
87
88         gpe_en_reg = inl(GPE0A_EN_PORT);
89         gpe_en_reg |= GPE0A_PME_B0_EN_BIT;
90         outl(gpe_en_reg, GPE0A_EN_PORT);
91 }
92
93 static void int0002_irq_mask(struct irq_data *data)
94 {
95         u32 gpe_en_reg;
96
97         gpe_en_reg = inl(GPE0A_EN_PORT);
98         gpe_en_reg &= ~GPE0A_PME_B0_EN_BIT;
99         outl(gpe_en_reg, GPE0A_EN_PORT);
100 }
101
102 static int int0002_irq_set_wake(struct irq_data *data, unsigned int on)
103 {
104         struct gpio_chip *chip = irq_data_get_irq_chip_data(data);
105         struct int0002_data *int0002 = container_of(chip, struct int0002_data, chip);
106
107         /*
108          * Applying of the wakeup flag to our parent IRQ is delayed till system
109          * suspend, because we only want to do this when using s2idle.
110          */
111         if (on)
112                 int0002->wake_enable_count++;
113         else
114                 int0002->wake_enable_count--;
115
116         return 0;
117 }
118
119 static irqreturn_t int0002_irq(int irq, void *data)
120 {
121         struct gpio_chip *chip = data;
122         u32 gpe_sts_reg;
123
124         gpe_sts_reg = inl(GPE0A_STS_PORT);
125         if (!(gpe_sts_reg & GPE0A_PME_B0_STS_BIT))
126                 return IRQ_NONE;
127
128         generic_handle_domain_irq_safe(chip->irq.domain, GPE0A_PME_B0_VIRT_GPIO_PIN);
129
130         pm_wakeup_hard_event(chip->parent);
131
132         return IRQ_HANDLED;
133 }
134
135 static bool int0002_check_wake(void *data)
136 {
137         u32 gpe_sts_reg;
138
139         gpe_sts_reg = inl(GPE0A_STS_PORT);
140         return (gpe_sts_reg & GPE0A_PME_B0_STS_BIT);
141 }
142
143 static struct irq_chip int0002_irqchip = {
144         .name                   = DRV_NAME,
145         .irq_ack                = int0002_irq_ack,
146         .irq_mask               = int0002_irq_mask,
147         .irq_unmask             = int0002_irq_unmask,
148         .irq_set_wake           = int0002_irq_set_wake,
149 };
150
151 static void int0002_init_irq_valid_mask(struct gpio_chip *chip,
152                                         unsigned long *valid_mask,
153                                         unsigned int ngpios)
154 {
155         bitmap_clear(valid_mask, 0, GPE0A_PME_B0_VIRT_GPIO_PIN);
156 }
157
158 static int int0002_probe(struct platform_device *pdev)
159 {
160         struct device *dev = &pdev->dev;
161         struct int0002_data *int0002;
162         struct gpio_irq_chip *girq;
163         struct gpio_chip *chip;
164         int irq, ret;
165
166         /* Menlow has a different INT0002 device? <sigh> */
167         if (!soc_intel_is_byt() && !soc_intel_is_cht())
168                 return -ENODEV;
169
170         irq = platform_get_irq(pdev, 0);
171         if (irq < 0)
172                 return irq;
173
174         int0002 = devm_kzalloc(dev, sizeof(*int0002), GFP_KERNEL);
175         if (!int0002)
176                 return -ENOMEM;
177
178         int0002->parent_irq = irq;
179
180         chip = &int0002->chip;
181         chip->label = DRV_NAME;
182         chip->parent = dev;
183         chip->owner = THIS_MODULE;
184         chip->get = int0002_gpio_get;
185         chip->set = int0002_gpio_set;
186         chip->direction_input = int0002_gpio_get;
187         chip->direction_output = int0002_gpio_direction_output;
188         chip->base = -1;
189         chip->ngpio = GPE0A_PME_B0_VIRT_GPIO_PIN + 1;
190         chip->irq.init_valid_mask = int0002_init_irq_valid_mask;
191
192         /*
193          * We directly request the irq here instead of passing a flow-handler
194          * to gpiochip_set_chained_irqchip, because the irq is shared.
195          * FIXME: augment this if we managed to pull handling of shared
196          * IRQs into gpiolib.
197          */
198         ret = devm_request_irq(dev, irq, int0002_irq,
199                                IRQF_SHARED, "INT0002", chip);
200         if (ret) {
201                 dev_err(dev, "Error requesting IRQ %d: %d\n", irq, ret);
202                 return ret;
203         }
204
205         girq = &chip->irq;
206         girq->chip = &int0002_irqchip;
207         /* This let us handle the parent IRQ in the driver */
208         girq->parent_handler = NULL;
209         girq->num_parents = 0;
210         girq->parents = NULL;
211         girq->default_type = IRQ_TYPE_NONE;
212         girq->handler = handle_edge_irq;
213
214         ret = devm_gpiochip_add_data(dev, chip, NULL);
215         if (ret) {
216                 dev_err(dev, "Error adding gpio chip: %d\n", ret);
217                 return ret;
218         }
219
220         acpi_register_wakeup_handler(irq, int0002_check_wake, NULL);
221         device_init_wakeup(dev, true);
222         dev_set_drvdata(dev, int0002);
223         return 0;
224 }
225
226 static int int0002_remove(struct platform_device *pdev)
227 {
228         device_init_wakeup(&pdev->dev, false);
229         acpi_unregister_wakeup_handler(int0002_check_wake, NULL);
230         return 0;
231 }
232
233 static int int0002_suspend(struct device *dev)
234 {
235         struct int0002_data *int0002 = dev_get_drvdata(dev);
236
237         /*
238          * The INT0002 parent IRQ is often shared with the ACPI GPE IRQ, don't
239          * muck with it when firmware based suspend is used, otherwise we may
240          * cause spurious wakeups from firmware managed suspend.
241          */
242         if (!pm_suspend_via_firmware() && int0002->wake_enable_count)
243                 enable_irq_wake(int0002->parent_irq);
244
245         return 0;
246 }
247
248 static int int0002_resume(struct device *dev)
249 {
250         struct int0002_data *int0002 = dev_get_drvdata(dev);
251
252         if (!pm_suspend_via_firmware() && int0002->wake_enable_count)
253                 disable_irq_wake(int0002->parent_irq);
254
255         return 0;
256 }
257
258 static const struct dev_pm_ops int0002_pm_ops = {
259         .suspend = int0002_suspend,
260         .resume = int0002_resume,
261 };
262
263 static const struct acpi_device_id int0002_acpi_ids[] = {
264         { "INT0002", 0 },
265         { },
266 };
267 MODULE_DEVICE_TABLE(acpi, int0002_acpi_ids);
268
269 static struct platform_driver int0002_driver = {
270         .driver = {
271                 .name                   = DRV_NAME,
272                 .acpi_match_table       = int0002_acpi_ids,
273                 .pm                     = &int0002_pm_ops,
274         },
275         .probe  = int0002_probe,
276         .remove = int0002_remove,
277 };
278
279 module_platform_driver(int0002_driver);
280
281 MODULE_AUTHOR("Hans de Goede <[email protected]>");
282 MODULE_DESCRIPTION("Intel INT0002 Virtual GPIO driver");
283 MODULE_LICENSE("GPL v2");
This page took 0.048069 seconds and 4 git commands to generate.