2 * drivers/mmc/host/sdhci-spear.c
4 * Support of SDHCI platform devices for spear soc family
6 * Copyright (C) 2010 ST Microelectronics
9 * Inspired by sdhci-pltfm.c
11 * This file is licensed under the terms of the GNU General Public
12 * License version 2. This program is licensed "as is" without any
13 * warranty of any kind, whether express or implied.
16 #include <linux/clk.h>
17 #include <linux/delay.h>
18 #include <linux/highmem.h>
19 #include <linux/module.h>
20 #include <linux/interrupt.h>
21 #include <linux/irq.h>
23 #include <linux/platform_device.h>
25 #include <linux/slab.h>
26 #include <linux/mmc/host.h>
27 #include <linux/mmc/slot-gpio.h>
36 static const struct sdhci_ops sdhci_pltfm_ops = {
37 .set_clock = sdhci_set_clock,
38 .set_bus_width = sdhci_set_bus_width,
40 .set_uhs_signaling = sdhci_set_uhs_signaling,
43 static int sdhci_probe(struct platform_device *pdev)
45 struct sdhci_host *host;
46 struct resource *iomem;
47 struct spear_sdhci *sdhci;
51 dev = pdev->dev.parent ? pdev->dev.parent : &pdev->dev;
52 host = sdhci_alloc_host(dev, sizeof(*sdhci));
55 dev_dbg(&pdev->dev, "cannot allocate memory for sdhci\n");
59 iomem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
60 host->ioaddr = devm_ioremap_resource(&pdev->dev, iomem);
61 if (IS_ERR(host->ioaddr)) {
62 ret = PTR_ERR(host->ioaddr);
63 dev_dbg(&pdev->dev, "unable to map iomem: %d\n", ret);
67 host->hw_name = "sdhci";
68 host->ops = &sdhci_pltfm_ops;
69 host->irq = platform_get_irq(pdev, 0);
74 host->quirks = SDHCI_QUIRK_BROKEN_ADMA;
76 sdhci = sdhci_priv(host);
79 sdhci->clk = devm_clk_get(&pdev->dev, NULL);
80 if (IS_ERR(sdhci->clk)) {
81 ret = PTR_ERR(sdhci->clk);
82 dev_dbg(&pdev->dev, "Error getting clock\n");
86 ret = clk_prepare_enable(sdhci->clk);
88 dev_dbg(&pdev->dev, "Error enabling clock\n");
92 ret = clk_set_rate(sdhci->clk, 50000000);
94 dev_dbg(&pdev->dev, "Error setting desired clk, clk=%lu\n",
95 clk_get_rate(sdhci->clk));
98 * It is optional to use GPIOs for sdhci card detection. If we
99 * find a descriptor using slot GPIO, we use it.
101 ret = mmc_gpiod_request_cd(host->mmc, "cd", 0, false, 0, NULL);
102 if (ret == -EPROBE_DEFER)
105 ret = sdhci_add_host(host);
109 platform_set_drvdata(pdev, host);
114 clk_disable_unprepare(sdhci->clk);
116 sdhci_free_host(host);
118 dev_err(&pdev->dev, "spear-sdhci probe failed: %d\n", ret);
122 static int sdhci_remove(struct platform_device *pdev)
124 struct sdhci_host *host = platform_get_drvdata(pdev);
125 struct spear_sdhci *sdhci = sdhci_priv(host);
129 scratch = readl(host->ioaddr + SDHCI_INT_STATUS);
130 if (scratch == (u32)-1)
133 sdhci_remove_host(host, dead);
134 clk_disable_unprepare(sdhci->clk);
135 sdhci_free_host(host);
140 #ifdef CONFIG_PM_SLEEP
141 static int sdhci_suspend(struct device *dev)
143 struct sdhci_host *host = dev_get_drvdata(dev);
144 struct spear_sdhci *sdhci = sdhci_priv(host);
147 if (host->tuning_mode != SDHCI_TUNING_MODE_3)
148 mmc_retune_needed(host->mmc);
150 ret = sdhci_suspend_host(host);
152 clk_disable(sdhci->clk);
157 static int sdhci_resume(struct device *dev)
159 struct sdhci_host *host = dev_get_drvdata(dev);
160 struct spear_sdhci *sdhci = sdhci_priv(host);
163 ret = clk_enable(sdhci->clk);
165 dev_dbg(dev, "Resume: Error enabling clock\n");
169 return sdhci_resume_host(host);
173 static SIMPLE_DEV_PM_OPS(sdhci_pm_ops, sdhci_suspend, sdhci_resume);
176 static const struct of_device_id sdhci_spear_id_table[] = {
177 { .compatible = "st,spear300-sdhci" },
180 MODULE_DEVICE_TABLE(of, sdhci_spear_id_table);
183 static struct platform_driver sdhci_driver = {
187 .of_match_table = of_match_ptr(sdhci_spear_id_table),
189 .probe = sdhci_probe,
190 .remove = sdhci_remove,
193 module_platform_driver(sdhci_driver);
195 MODULE_DESCRIPTION("SPEAr Secure Digital Host Controller Interface driver");
197 MODULE_LICENSE("GPL v2");