drivers/spi/spi-dln2.c

   1 // SPDX-License-Identifier: GPL-2.0-only
   2 /*
   3  * Driver for the Diolan DLN-2 USB-SPI adapter
   4  *
   5  * Copyright (c) 2014 Intel Corporation
   6  */
   7
   8 #include <linux/kernel.h>
   9 #include <linux/module.h>
  10 #include <linux/platform_device.h>
  11 #include <linux/mfd/dln2.h>
  12 #include <linux/spi/spi.h>
  13 #include <linux/pm_runtime.h>
  14 #include <asm/unaligned.h>
  15
  16 #define DLN2_SPI_MODULE_ID              0x02
  17 #define DLN2_SPI_CMD(cmd)               DLN2_CMD(cmd, DLN2_SPI_MODULE_ID)
  18
  19 /* SPI commands */
  20 #define DLN2_SPI_GET_PORT_COUNT                 DLN2_SPI_CMD(0x00)
  21 #define DLN2_SPI_ENABLE                         DLN2_SPI_CMD(0x11)
  22 #define DLN2_SPI_DISABLE                        DLN2_SPI_CMD(0x12)
  23 #define DLN2_SPI_IS_ENABLED                     DLN2_SPI_CMD(0x13)
  24 #define DLN2_SPI_SET_MODE                       DLN2_SPI_CMD(0x14)
  25 #define DLN2_SPI_GET_MODE                       DLN2_SPI_CMD(0x15)
  26 #define DLN2_SPI_SET_FRAME_SIZE                 DLN2_SPI_CMD(0x16)
  27 #define DLN2_SPI_GET_FRAME_SIZE                 DLN2_SPI_CMD(0x17)
  28 #define DLN2_SPI_SET_FREQUENCY                  DLN2_SPI_CMD(0x18)
  29 #define DLN2_SPI_GET_FREQUENCY                  DLN2_SPI_CMD(0x19)
  30 #define DLN2_SPI_READ_WRITE                     DLN2_SPI_CMD(0x1A)
  31 #define DLN2_SPI_READ                           DLN2_SPI_CMD(0x1B)
  32 #define DLN2_SPI_WRITE                          DLN2_SPI_CMD(0x1C)
  33 #define DLN2_SPI_SET_DELAY_BETWEEN_SS           DLN2_SPI_CMD(0x20)
  34 #define DLN2_SPI_GET_DELAY_BETWEEN_SS           DLN2_SPI_CMD(0x21)
  35 #define DLN2_SPI_SET_DELAY_AFTER_SS             DLN2_SPI_CMD(0x22)
  36 #define DLN2_SPI_GET_DELAY_AFTER_SS             DLN2_SPI_CMD(0x23)
  37 #define DLN2_SPI_SET_DELAY_BETWEEN_FRAMES       DLN2_SPI_CMD(0x24)
  38 #define DLN2_SPI_GET_DELAY_BETWEEN_FRAMES       DLN2_SPI_CMD(0x25)
  39 #define DLN2_SPI_SET_SS                         DLN2_SPI_CMD(0x26)
  40 #define DLN2_SPI_GET_SS                         DLN2_SPI_CMD(0x27)
  41 #define DLN2_SPI_RELEASE_SS                     DLN2_SPI_CMD(0x28)
  42 #define DLN2_SPI_SS_VARIABLE_ENABLE             DLN2_SPI_CMD(0x2B)
  43 #define DLN2_SPI_SS_VARIABLE_DISABLE            DLN2_SPI_CMD(0x2C)
  44 #define DLN2_SPI_SS_VARIABLE_IS_ENABLED         DLN2_SPI_CMD(0x2D)
  45 #define DLN2_SPI_SS_AAT_ENABLE                  DLN2_SPI_CMD(0x2E)
  46 #define DLN2_SPI_SS_AAT_DISABLE                 DLN2_SPI_CMD(0x2F)
  47 #define DLN2_SPI_SS_AAT_IS_ENABLED              DLN2_SPI_CMD(0x30)
  48 #define DLN2_SPI_SS_BETWEEN_FRAMES_ENABLE       DLN2_SPI_CMD(0x31)
  49 #define DLN2_SPI_SS_BETWEEN_FRAMES_DISABLE      DLN2_SPI_CMD(0x32)
  50 #define DLN2_SPI_SS_BETWEEN_FRAMES_IS_ENABLED   DLN2_SPI_CMD(0x33)
  51 #define DLN2_SPI_SET_CPHA                       DLN2_SPI_CMD(0x34)
  52 #define DLN2_SPI_GET_CPHA                       DLN2_SPI_CMD(0x35)
  53 #define DLN2_SPI_SET_CPOL                       DLN2_SPI_CMD(0x36)
  54 #define DLN2_SPI_GET_CPOL                       DLN2_SPI_CMD(0x37)
  55 #define DLN2_SPI_SS_MULTI_ENABLE                DLN2_SPI_CMD(0x38)
  56 #define DLN2_SPI_SS_MULTI_DISABLE               DLN2_SPI_CMD(0x39)
  57 #define DLN2_SPI_SS_MULTI_IS_ENABLED            DLN2_SPI_CMD(0x3A)
  58 #define DLN2_SPI_GET_SUPPORTED_MODES            DLN2_SPI_CMD(0x40)
  59 #define DLN2_SPI_GET_SUPPORTED_CPHA_VALUES      DLN2_SPI_CMD(0x41)
  60 #define DLN2_SPI_GET_SUPPORTED_CPOL_VALUES      DLN2_SPI_CMD(0x42)
  61 #define DLN2_SPI_GET_SUPPORTED_FRAME_SIZES      DLN2_SPI_CMD(0x43)
  62 #define DLN2_SPI_GET_SS_COUNT                   DLN2_SPI_CMD(0x44)
  63 #define DLN2_SPI_GET_MIN_FREQUENCY              DLN2_SPI_CMD(0x45)
  64 #define DLN2_SPI_GET_MAX_FREQUENCY              DLN2_SPI_CMD(0x46)
  65 #define DLN2_SPI_GET_MIN_DELAY_BETWEEN_SS       DLN2_SPI_CMD(0x47)
  66 #define DLN2_SPI_GET_MAX_DELAY_BETWEEN_SS       DLN2_SPI_CMD(0x48)
  67 #define DLN2_SPI_GET_MIN_DELAY_AFTER_SS         DLN2_SPI_CMD(0x49)
  68 #define DLN2_SPI_GET_MAX_DELAY_AFTER_SS         DLN2_SPI_CMD(0x4A)
  69 #define DLN2_SPI_GET_MIN_DELAY_BETWEEN_FRAMES   DLN2_SPI_CMD(0x4B)
  70 #define DLN2_SPI_GET_MAX_DELAY_BETWEEN_FRAMES   DLN2_SPI_CMD(0x4C)
  71
  72 #define DLN2_SPI_MAX_XFER_SIZE                  256
  73 #define DLN2_SPI_BUF_SIZE                       (DLN2_SPI_MAX_XFER_SIZE + 16)
  74 #define DLN2_SPI_ATTR_LEAVE_SS_LOW              BIT(0)
  75 #define DLN2_TRANSFERS_WAIT_COMPLETE            1
  76 #define DLN2_TRANSFERS_CANCEL                   0
  77 #define DLN2_RPM_AUTOSUSPEND_TIMEOUT            2000
  78
  79 struct dln2_spi {
  80         struct platform_device *pdev;
  81         struct spi_master *master;
  82         u8 port;
  83
  84         /*
  85          * This buffer will be used mainly for read/write operations. Since
  86          * they're quite large, we cannot use the stack. Protection is not
  87          * needed because all SPI communication is serialized by the SPI core.
  88          */
  89         void *buf;
  90
  91         u8 bpw;
  92         u32 speed;
  93         u16 mode;
  94         u8 cs;
  95 };
  96
  97 /*
  98  * Enable/Disable SPI module. The disable command will wait for transfers to
  99  * complete first.
 100  */
 101 static int dln2_spi_enable(struct dln2_spi *dln2, bool enable)
 102 {
 103         u16 cmd;
 104         struct {
 105                 u8 port;
 106                 u8 wait_for_completion;
 107         } tx;
 108         unsigned len = sizeof(tx);
 109
 110         tx.port = dln2->port;
 111
 112         if (enable) {
 113                 cmd = DLN2_SPI_ENABLE;
 114                 len -= sizeof(tx.wait_for_completion);
 115         } else {
 116                 tx.wait_for_completion = DLN2_TRANSFERS_WAIT_COMPLETE;
 117                 cmd = DLN2_SPI_DISABLE;
 118         }
 119
 120         return dln2_transfer_tx(dln2->pdev, cmd, &tx, len);
 121 }
 122
 123 /*
 124  * Select/unselect multiple CS lines. The selected lines will be automatically
 125  * toggled LOW/HIGH by the board firmware during transfers, provided they're
 126  * enabled first.
 127  *
 128  * Ex: cs_mask = 0x03 -> CS0 & CS1 will be selected and the next WR/RD operation
 129  *                       will toggle the lines LOW/HIGH automatically.
 130  */
 131 static int dln2_spi_cs_set(struct dln2_spi *dln2, u8 cs_mask)
 132 {
 133         struct {
 134                 u8 port;
 135                 u8 cs;
 136         } tx;
 137
 138         tx.port = dln2->port;
 139
 140         /*
 141          * According to Diolan docs, "a slave device can be selected by changing
 142          * the corresponding bit value to 0". The rest must be set to 1. Hence
 143          * the bitwise NOT in front.
 144          */
 145         tx.cs = ~cs_mask;
 146
 147         return dln2_transfer_tx(dln2->pdev, DLN2_SPI_SET_SS, &tx, sizeof(tx));
 148 }
 149
 150 /*
 151  * Select one CS line. The other lines will be un-selected.
 152  */
 153 static int dln2_spi_cs_set_one(struct dln2_spi *dln2, u8 cs)
 154 {
 155         return dln2_spi_cs_set(dln2, BIT(cs));
 156 }
 157
 158 /*
 159  * Enable/disable CS lines for usage. The module has to be disabled first.
 160  */
 161 static int dln2_spi_cs_enable(struct dln2_spi *dln2, u8 cs_mask, bool enable)
 162 {
 163         struct {
 164                 u8 port;
 165                 u8 cs;
 166         } tx;
 167         u16 cmd;
 168
 169         tx.port = dln2->port;
 170         tx.cs = cs_mask;
 171         cmd = enable ? DLN2_SPI_SS_MULTI_ENABLE : DLN2_SPI_SS_MULTI_DISABLE;
 172
 173         return dln2_transfer_tx(dln2->pdev, cmd, &tx, sizeof(tx));
 174 }
 175
 176 static int dln2_spi_cs_enable_all(struct dln2_spi *dln2, bool enable)
 177 {
 178         u8 cs_mask = GENMASK(dln2->master->num_chipselect - 1, 0);
 179
 180         return dln2_spi_cs_enable(dln2, cs_mask, enable);
 181 }
 182
 183 static int dln2_spi_get_cs_num(struct dln2_spi *dln2, u16 *cs_num)
 184 {
 185         int ret;
 186         struct {
 187                 u8 port;
 188         } tx;
 189         struct {
 190                 __le16 cs_count;
 191         } rx;
 192         unsigned rx_len = sizeof(rx);
 193
 194         tx.port = dln2->port;
 195         ret = dln2_transfer(dln2->pdev, DLN2_SPI_GET_SS_COUNT, &tx, sizeof(tx),
 196                             &rx, &rx_len);
 197         if (ret < 0)
 198                 return ret;
 199         if (rx_len < sizeof(rx))
 200                 return -EPROTO;
 201
 202         *cs_num = le16_to_cpu(rx.cs_count);
 203
 204         dev_dbg(&dln2->pdev->dev, "cs_num = %d\n", *cs_num);
 205
 206         return 0;
 207 }
 208
 209 static int dln2_spi_get_speed(struct dln2_spi *dln2, u16 cmd, u32 *freq)
 210 {
 211         int ret;
 212         struct {
 213                 u8 port;
 214         } tx;
 215         struct {
 216                 __le32 speed;
 217         } rx;
 218         unsigned rx_len = sizeof(rx);
 219
 220         tx.port = dln2->port;
 221
 222         ret = dln2_transfer(dln2->pdev, cmd, &tx, sizeof(tx), &rx, &rx_len);
 223         if (ret < 0)
 224                 return ret;
 225         if (rx_len < sizeof(rx))
 226                 return -EPROTO;
 227
 228         *freq = le32_to_cpu(rx.speed);
 229
 230         return 0;
 231 }
 232
 233 /*
 234  * Get bus min/max frequencies.
 235  */
 236 static int dln2_spi_get_speed_range(struct dln2_spi *dln2, u32 *fmin, u32 *fmax)
 237 {
 238         int ret;
 239
 240         ret = dln2_spi_get_speed(dln2, DLN2_SPI_GET_MIN_FREQUENCY, fmin);
 241         if (ret < 0)
 242                 return ret;
 243
 244         ret = dln2_spi_get_speed(dln2, DLN2_SPI_GET_MAX_FREQUENCY, fmax);
 245         if (ret < 0)
 246                 return ret;
 247
 248         dev_dbg(&dln2->pdev->dev, "freq_min = %d, freq_max = %d\n",
 249                 *fmin, *fmax);
 250
 251         return 0;
 252 }
 253
 254 /*
 255  * Set the bus speed. The module will automatically round down to the closest
 256  * available frequency and returns it. The module has to be disabled first.
 257  */
 258 static int dln2_spi_set_speed(struct dln2_spi *dln2, u32 speed)
 259 {
 260         int ret;
 261         struct {
 262                 u8 port;
 263                 __le32 speed;
 264         } __packed tx;
 265         struct {
 266                 __le32 speed;
 267         } rx;
 268         int rx_len = sizeof(rx);
 269
 270         tx.port = dln2->port;
 271         tx.speed = cpu_to_le32(speed);
 272
 273         ret = dln2_transfer(dln2->pdev, DLN2_SPI_SET_FREQUENCY, &tx, sizeof(tx),
 274                             &rx, &rx_len);
 275         if (ret < 0)
 276                 return ret;
 277         if (rx_len < sizeof(rx))
 278                 return -EPROTO;
 279
 280         return 0;
 281 }
 282
 283 /*
 284  * Change CPOL & CPHA. The module has to be disabled first.
 285  */
 286 static int dln2_spi_set_mode(struct dln2_spi *dln2, u8 mode)
 287 {
 288         struct {
 289                 u8 port;
 290                 u8 mode;
 291         } tx;
 292
 293         tx.port = dln2->port;
 294         tx.mode = mode;
 295
 296         return dln2_transfer_tx(dln2->pdev, DLN2_SPI_SET_MODE, &tx, sizeof(tx));
 297 }
 298
 299 /*
 300  * Change frame size. The module has to be disabled first.
 301  */
 302 static int dln2_spi_set_bpw(struct dln2_spi *dln2, u8 bpw)
 303 {
 304         struct {
 305                 u8 port;
 306                 u8 bpw;
 307         } tx;
 308
 309         tx.port = dln2->port;
 310         tx.bpw = bpw;
 311
 312         return dln2_transfer_tx(dln2->pdev, DLN2_SPI_SET_FRAME_SIZE,
 313                                 &tx, sizeof(tx));
 314 }
 315
 316 static int dln2_spi_get_supported_frame_sizes(struct dln2_spi *dln2,
 317                                               u32 *bpw_mask)
 318 {
 319         int ret;
 320         struct {
 321                 u8 port;
 322         } tx;
 323         struct {
 324                 u8 count;
 325                 u8 frame_sizes[36];
 326         } *rx = dln2->buf;
 327         unsigned rx_len = sizeof(*rx);
 328         int i;
 329
 330         tx.port = dln2->port;
 331
 332         ret = dln2_transfer(dln2->pdev, DLN2_SPI_GET_SUPPORTED_FRAME_SIZES,
 333                             &tx, sizeof(tx), rx, &rx_len);
 334         if (ret < 0)
 335                 return ret;
 336         if (rx_len < sizeof(*rx))
 337                 return -EPROTO;
 338         if (rx->count > ARRAY_SIZE(rx->frame_sizes))
 339                 return -EPROTO;
 340
 341         *bpw_mask = 0;
 342         for (i = 0; i < rx->count; i++)
 343                 *bpw_mask |= BIT(rx->frame_sizes[i] - 1);
 344
 345         dev_dbg(&dln2->pdev->dev, "bpw_mask = 0x%X\n", *bpw_mask);
 346
 347         return 0;
 348 }
 349
 350 /*
 351  * Copy the data to DLN2 buffer and change the byte order to LE, requested by
 352  * DLN2 module. SPI core makes sure that the data length is a multiple of word
 353  * size.
 354  */
 355 static int dln2_spi_copy_to_buf(u8 *dln2_buf, const u8 *src, u16 len, u8 bpw)
 356 {
 357 #ifdef __LITTLE_ENDIAN
 358         memcpy(dln2_buf, src, len);
 359 #else
 360         if (bpw <= 8) {
 361                 memcpy(dln2_buf, src, len);
 362         } else if (bpw <= 16) {
 363                 __le16 *d = (__le16 *)dln2_buf;
 364                 u16 *s = (u16 *)src;
 365
 366                 len = len / 2;
 367                 while (len--)
 368                         *d++ = cpu_to_le16p(s++);
 369         } else {
 370                 __le32 *d = (__le32 *)dln2_buf;
 371                 u32 *s = (u32 *)src;
 372
 373                 len = len / 4;
 374                 while (len--)
 375                         *d++ = cpu_to_le32p(s++);
 376         }
 377 #endif
 378
 379         return 0;
 380 }
 381
 382 /*
 383  * Copy the data from DLN2 buffer and convert to CPU byte order since the DLN2
 384  * buffer is LE ordered. SPI core makes sure that the data length is a multiple
 385  * of word size. The RX dln2_buf is 2 byte aligned so, for BE, we have to make
 386  * sure we avoid unaligned accesses for 32 bit case.
 387  */
 388 static int dln2_spi_copy_from_buf(u8 *dest, const u8 *dln2_buf, u16 len, u8 bpw)
 389 {
 390 #ifdef __LITTLE_ENDIAN
 391         memcpy(dest, dln2_buf, len);
 392 #else
 393         if (bpw <= 8) {
 394                 memcpy(dest, dln2_buf, len);
 395         } else if (bpw <= 16) {
 396                 u16 *d = (u16 *)dest;
 397                 __le16 *s = (__le16 *)dln2_buf;
 398
 399                 len = len / 2;
 400                 while (len--)
 401                         *d++ = le16_to_cpup(s++);
 402         } else {
 403                 u32 *d = (u32 *)dest;
 404                 __le32 *s = (__le32 *)dln2_buf;
 405
 406                 len = len / 4;
 407                 while (len--)
 408                         *d++ = get_unaligned_le32(s++);
 409         }
 410 #endif
 411
 412         return 0;
 413 }
 414
 415 /*
 416  * Perform one write operation.
 417  */
 418 static int dln2_spi_write_one(struct dln2_spi *dln2, const u8 *data,
 419                               u16 data_len, u8 attr)
 420 {
 421         struct {
 422                 u8 port;
 423                 __le16 size;
 424                 u8 attr;
 425                 u8 buf[DLN2_SPI_MAX_XFER_SIZE];
 426         } __packed *tx = dln2->buf;
 427         unsigned tx_len;
 428
 429         BUILD_BUG_ON(sizeof(*tx) > DLN2_SPI_BUF_SIZE);
 430
 431         if (data_len > DLN2_SPI_MAX_XFER_SIZE)
 432                 return -EINVAL;
 433
 434         tx->port = dln2->port;
 435         tx->size = cpu_to_le16(data_len);
 436         tx->attr = attr;
 437
 438         dln2_spi_copy_to_buf(tx->buf, data, data_len, dln2->bpw);
 439
 440         tx_len = sizeof(*tx) + data_len - DLN2_SPI_MAX_XFER_SIZE;
 441         return dln2_transfer_tx(dln2->pdev, DLN2_SPI_WRITE, tx, tx_len);
 442 }
 443
 444 /*
 445  * Perform one read operation.
 446  */
 447 static int dln2_spi_read_one(struct dln2_spi *dln2, u8 *data,
 448                              u16 data_len, u8 attr)
 449 {
 450         int ret;
 451         struct {
 452                 u8 port;
 453                 __le16 size;
 454                 u8 attr;
 455         } __packed tx;
 456         struct {
 457                 __le16 size;
 458                 u8 buf[DLN2_SPI_MAX_XFER_SIZE];
 459         } __packed *rx = dln2->buf;
 460         unsigned rx_len = sizeof(*rx);
 461
 462         BUILD_BUG_ON(sizeof(*rx) > DLN2_SPI_BUF_SIZE);
 463
 464         if (data_len > DLN2_SPI_MAX_XFER_SIZE)
 465                 return -EINVAL;
 466
 467         tx.port = dln2->port;
 468         tx.size = cpu_to_le16(data_len);
 469         tx.attr = attr;
 470
 471         ret = dln2_transfer(dln2->pdev, DLN2_SPI_READ, &tx, sizeof(tx),
 472                             rx, &rx_len);
 473         if (ret < 0)
 474                 return ret;
 475         if (rx_len < sizeof(rx->size) + data_len)
 476                 return -EPROTO;
 477         if (le16_to_cpu(rx->size) != data_len)
 478                 return -EPROTO;
 479
 480         dln2_spi_copy_from_buf(data, rx->buf, data_len, dln2->bpw);
 481
 482         return 0;
 483 }
 484
 485 /*
 486  * Perform one write & read operation.
 487  */
 488 static int dln2_spi_read_write_one(struct dln2_spi *dln2, const u8 *tx_data,
 489                                    u8 *rx_data, u16 data_len, u8 attr)
 490 {
 491         int ret;
 492         struct {
 493                 u8 port;
 494                 __le16 size;
 495                 u8 attr;
 496                 u8 buf[DLN2_SPI_MAX_XFER_SIZE];
 497         } __packed *tx;
 498         struct {
 499                 __le16 size;
 500                 u8 buf[DLN2_SPI_MAX_XFER_SIZE];
 501         } __packed *rx;
 502         unsigned tx_len, rx_len;
 503
 504         BUILD_BUG_ON(sizeof(*tx) > DLN2_SPI_BUF_SIZE ||
 505                      sizeof(*rx) > DLN2_SPI_BUF_SIZE);
 506
 507         if (data_len > DLN2_SPI_MAX_XFER_SIZE)
 508                 return -EINVAL;
 509
 510         /*
 511          * Since this is a pseudo full-duplex communication, we're perfectly
 512          * safe to use the same buffer for both tx and rx. When DLN2 sends the
 513          * response back, with the rx data, we don't need the tx buffer anymore.
 514          */
 515         tx = dln2->buf;
 516         rx = dln2->buf;
 517
 518         tx->port = dln2->port;
 519         tx->size = cpu_to_le16(data_len);
 520         tx->attr = attr;
 521
 522         dln2_spi_copy_to_buf(tx->buf, tx_data, data_len, dln2->bpw);
 523
 524         tx_len = sizeof(*tx) + data_len - DLN2_SPI_MAX_XFER_SIZE;
 525         rx_len = sizeof(*rx);
 526
 527         ret = dln2_transfer(dln2->pdev, DLN2_SPI_READ_WRITE, tx, tx_len,
 528                             rx, &rx_len);
 529         if (ret < 0)
 530                 return ret;
 531         if (rx_len < sizeof(rx->size) + data_len)
 532                 return -EPROTO;
 533         if (le16_to_cpu(rx->size) != data_len)
 534                 return -EPROTO;
 535
 536         dln2_spi_copy_from_buf(rx_data, rx->buf, data_len, dln2->bpw);
 537
 538         return 0;
 539 }
 540
 541 /*
 542  * Read/Write wrapper. It will automatically split an operation into multiple
 543  * single ones due to device buffer constraints.
 544  */
 545 static int dln2_spi_rdwr(struct dln2_spi *dln2, const u8 *tx_data,
 546                          u8 *rx_data, u16 data_len, u8 attr) {
 547         int ret;
 548         u16 len;
 549         u8 temp_attr;
 550         u16 remaining = data_len;
 551         u16 offset;
 552
 553         do {
 554                 if (remaining > DLN2_SPI_MAX_XFER_SIZE) {
 555                         len = DLN2_SPI_MAX_XFER_SIZE;
 556                         temp_attr = DLN2_SPI_ATTR_LEAVE_SS_LOW;
 557                 } else {
 558                         len = remaining;
 559                         temp_attr = attr;
 560                 }
 561
 562                 offset = data_len - remaining;
 563
 564                 if (tx_data && rx_data) {
 565                         ret = dln2_spi_read_write_one(dln2,
 566                                                       tx_data + offset,
 567                                                       rx_data + offset,
 568                                                       len, temp_attr);
 569                 } else if (tx_data) {
 570                         ret = dln2_spi_write_one(dln2,
 571                                                  tx_data + offset,
 572                                                  len, temp_attr);
 573                 } else if (rx_data) {
 574                         ret = dln2_spi_read_one(dln2,
 575                                                 rx_data + offset,
 576                                                 len, temp_attr);
 577                  } else {
 578                         return -EINVAL;
 579                  }
 580
 581                 if (ret < 0)
 582                         return ret;
 583
 584                 remaining -= len;
 585         } while (remaining);
 586
 587         return 0;
 588 }
 589
 590 static int dln2_spi_prepare_message(struct spi_master *master,
 591                                     struct spi_message *message)
 592 {
 593         int ret;
 594         struct dln2_spi *dln2 = spi_master_get_devdata(master);
 595         struct spi_device *spi = message->spi;
 596
 597         if (dln2->cs != spi->chip_select) {
 598                 ret = dln2_spi_cs_set_one(dln2, spi->chip_select);
 599                 if (ret < 0)
 600                         return ret;
 601
 602                 dln2->cs = spi->chip_select;
 603         }
 604
 605         return 0;
 606 }
 607
 608 static int dln2_spi_transfer_setup(struct dln2_spi *dln2, u32 speed,
 609                                    u8 bpw, u8 mode)
 610 {
 611         int ret;
 612         bool bus_setup_change;
 613
 614         bus_setup_change = dln2->speed != speed || dln2->mode != mode ||
 615                            dln2->bpw != bpw;
 616
 617         if (!bus_setup_change)
 618                 return 0;
 619
 620         ret = dln2_spi_enable(dln2, false);
 621         if (ret < 0)
 622                 return ret;
 623
 624         if (dln2->speed != speed) {
 625                 ret = dln2_spi_set_speed(dln2, speed);
 626                 if (ret < 0)
 627                         return ret;
 628
 629                 dln2->speed = speed;
 630         }
 631
 632         if (dln2->mode != mode) {
 633                 ret = dln2_spi_set_mode(dln2, mode & 0x3);
 634                 if (ret < 0)
 635                         return ret;
 636
 637                 dln2->mode = mode;
 638         }
 639
 640         if (dln2->bpw != bpw) {
 641                 ret = dln2_spi_set_bpw(dln2, bpw);
 642                 if (ret < 0)
 643                         return ret;
 644
 645                 dln2->bpw = bpw;
 646         }
 647
 648         return dln2_spi_enable(dln2, true);
 649 }
 650
 651 static int dln2_spi_transfer_one(struct spi_master *master,
 652                                  struct spi_device *spi,
 653                                  struct spi_transfer *xfer)
 654 {
 655         struct dln2_spi *dln2 = spi_master_get_devdata(master);
 656         int status;
 657         u8 attr = 0;
 658
 659         status = dln2_spi_transfer_setup(dln2, xfer->speed_hz,
 660                                          xfer->bits_per_word,
 661                                          spi->mode);
 662         if (status < 0) {
 663                 dev_err(&dln2->pdev->dev, "Cannot setup transfer\n");
 664                 return status;
 665         }
 666
 667         if (!xfer->cs_change && !spi_transfer_is_last(master, xfer))
 668                 attr = DLN2_SPI_ATTR_LEAVE_SS_LOW;
 669
 670         status = dln2_spi_rdwr(dln2, xfer->tx_buf, xfer->rx_buf,
 671                                xfer->len, attr);
 672         if (status < 0)
 673                 dev_err(&dln2->pdev->dev, "write/read failed!\n");
 674
 675         return status;
 676 }
 677
 678 static int dln2_spi_probe(struct platform_device *pdev)
 679 {
 680         struct spi_master *master;
 681         struct dln2_spi *dln2;
 682         struct dln2_platform_data *pdata = dev_get_platdata(&pdev->dev);
 683         struct device *dev = &pdev->dev;
 684         int ret;
 685
 686         master = spi_alloc_master(&pdev->dev, sizeof(*dln2));
 687         if (!master)
 688                 return -ENOMEM;
 689
 690         platform_set_drvdata(pdev, master);
 691
 692         dln2 = spi_master_get_devdata(master);
 693
 694         dln2->buf = devm_kmalloc(&pdev->dev, DLN2_SPI_BUF_SIZE, GFP_KERNEL);
 695         if (!dln2->buf) {
 696                 ret = -ENOMEM;
 697                 goto exit_free_master;
 698         }
 699
 700         dln2->master = master;
 701         dln2->master->dev.of_node = dev->of_node;
 702         dln2->pdev = pdev;
 703         dln2->port = pdata->port;
 704         /* cs/mode can never be 0xff, so the first transfer will set them */
 705         dln2->cs = 0xff;
 706         dln2->mode = 0xff;
 707
 708         /* disable SPI module before continuing with the setup */
 709         ret = dln2_spi_enable(dln2, false);
 710         if (ret < 0) {
 711                 dev_err(&pdev->dev, "Failed to disable SPI module\n");
 712                 goto exit_free_master;
 713         }
 714
 715         ret = dln2_spi_get_cs_num(dln2, &master->num_chipselect);
 716         if (ret < 0) {
 717                 dev_err(&pdev->dev, "Failed to get number of CS pins\n");
 718                 goto exit_free_master;
 719         }
 720
 721         ret = dln2_spi_get_speed_range(dln2,
 722                                        &master->min_speed_hz,
 723                                        &master->max_speed_hz);
 724         if (ret < 0) {
 725                 dev_err(&pdev->dev, "Failed to read bus min/max freqs\n");
 726                 goto exit_free_master;
 727         }
 728
 729         ret = dln2_spi_get_supported_frame_sizes(dln2,
 730                                                  &master->bits_per_word_mask);
 731         if (ret < 0) {
 732                 dev_err(&pdev->dev, "Failed to read supported frame sizes\n");
 733                 goto exit_free_master;
 734         }
 735
 736         ret = dln2_spi_cs_enable_all(dln2, true);
 737         if (ret < 0) {
 738                 dev_err(&pdev->dev, "Failed to enable CS pins\n");
 739                 goto exit_free_master;
 740         }
 741
 742         master->bus_num = -1;
 743         master->mode_bits = SPI_CPOL | SPI_CPHA;
 744         master->prepare_message = dln2_spi_prepare_message;
 745         master->transfer_one = dln2_spi_transfer_one;
 746         master->auto_runtime_pm = true;
 747
 748         /* enable SPI module, we're good to go */
 749         ret = dln2_spi_enable(dln2, true);
 750         if (ret < 0) {
 751                 dev_err(&pdev->dev, "Failed to enable SPI module\n");
 752                 goto exit_free_master;
 753         }
 754
 755         pm_runtime_set_autosuspend_delay(&pdev->dev,
 756                                          DLN2_RPM_AUTOSUSPEND_TIMEOUT);
 757         pm_runtime_use_autosuspend(&pdev->dev);
 758         pm_runtime_set_active(&pdev->dev);
 759         pm_runtime_enable(&pdev->dev);
 760
 761         ret = devm_spi_register_master(&pdev->dev, master);
 762         if (ret < 0) {
 763                 dev_err(&pdev->dev, "Failed to register master\n");
 764                 goto exit_register;
 765         }
 766
 767         return ret;
 768
 769 exit_register:
 770         pm_runtime_disable(&pdev->dev);
 771         pm_runtime_set_suspended(&pdev->dev);
 772
 773         if (dln2_spi_enable(dln2, false) < 0)
 774                 dev_err(&pdev->dev, "Failed to disable SPI module\n");
 775 exit_free_master:
 776         spi_master_put(master);
 777
 778         return ret;
 779 }
 780
 781 static int dln2_spi_remove(struct platform_device *pdev)
 782 {
 783         struct spi_master *master = spi_master_get(platform_get_drvdata(pdev));
 784         struct dln2_spi *dln2 = spi_master_get_devdata(master);
 785
 786         pm_runtime_disable(&pdev->dev);
 787
 788         if (dln2_spi_enable(dln2, false) < 0)
 789                 dev_err(&pdev->dev, "Failed to disable SPI module\n");
 790
 791         return 0;
 792 }
 793
 794 #ifdef CONFIG_PM_SLEEP
 795 static int dln2_spi_suspend(struct device *dev)
 796 {
 797         int ret;
 798         struct spi_master *master = dev_get_drvdata(dev);
 799         struct dln2_spi *dln2 = spi_master_get_devdata(master);
 800
 801         ret = spi_master_suspend(master);
 802         if (ret < 0)
 803                 return ret;
 804
 805         if (!pm_runtime_suspended(dev)) {
 806                 ret = dln2_spi_enable(dln2, false);
 807                 if (ret < 0)
 808                         return ret;
 809         }
 810
 811         /*
 812          * USB power may be cut off during sleep. Resetting the following
 813          * parameters will force the board to be set up before first transfer.
 814          */
 815         dln2->cs = 0xff;
 816         dln2->speed = 0;
 817         dln2->bpw = 0;
 818         dln2->mode = 0xff;
 819
 820         return 0;
 821 }
 822
 823 static int dln2_spi_resume(struct device *dev)
 824 {
 825         int ret;
 826         struct spi_master *master = dev_get_drvdata(dev);
 827         struct dln2_spi *dln2 = spi_master_get_devdata(master);
 828
 829         if (!pm_runtime_suspended(dev)) {
 830                 ret = dln2_spi_cs_enable_all(dln2, true);
 831                 if (ret < 0)
 832                         return ret;
 833
 834                 ret = dln2_spi_enable(dln2, true);
 835                 if (ret < 0)
 836                         return ret;
 837         }
 838
 839         return spi_master_resume(master);
 840 }
 841 #endif /* CONFIG_PM_SLEEP */
 842
 843 #ifdef CONFIG_PM
 844 static int dln2_spi_runtime_suspend(struct device *dev)
 845 {
 846         struct spi_master *master = dev_get_drvdata(dev);
 847         struct dln2_spi *dln2 = spi_master_get_devdata(master);
 848
 849         return dln2_spi_enable(dln2, false);
 850 }
 851
 852 static int dln2_spi_runtime_resume(struct device *dev)
 853 {
 854         struct spi_master *master = dev_get_drvdata(dev);
 855         struct dln2_spi *dln2 = spi_master_get_devdata(master);
 856
 857         return  dln2_spi_enable(dln2, true);
 858 }
 859 #endif /* CONFIG_PM */
 860
 861 static const struct dev_pm_ops dln2_spi_pm = {
 862         SET_SYSTEM_SLEEP_PM_OPS(dln2_spi_suspend, dln2_spi_resume)
 863         SET_RUNTIME_PM_OPS(dln2_spi_runtime_suspend,
 864                            dln2_spi_runtime_resume, NULL)
 865 };
 866
 867 static struct platform_driver spi_dln2_driver = {
 868         .driver = {
 869                 .name   = "dln2-spi",
 870                 .pm     = &dln2_spi_pm,
 871         },
 872         .probe          = dln2_spi_probe,
 873         .remove         = dln2_spi_remove,
 874 };
 875 module_platform_driver(spi_dln2_driver);
 876
 877 MODULE_DESCRIPTION("Driver for the Diolan DLN2 SPI master interface");
 878 MODULE_AUTHOR("Laurentiu Palcu <[email protected]>");
 879 MODULE_LICENSE("GPL v2");
 880 MODULE_ALIAS("platform:dln2-spi");