drivers/scsi/pm8001/pm8001_init.c

   1 /*
   2  * PMC-Sierra PM8001/8081/8088/8089 SAS/SATA based host adapters driver
   3  *
   4  * Copyright (c) 2008-2009 USI Co., Ltd.
   5  * All rights reserved.
   6  *
   7  * Redistribution and use in source and binary forms, with or without
   8  * modification, are permitted provided that the following conditions
   9  * are met:
  10  * 1. Redistributions of source code must retain the above copyright
  11  *    notice, this list of conditions, and the following disclaimer,
  12  *    without modification.
  13  * 2. Redistributions in binary form must reproduce at minimum a disclaimer
  14  *    substantially similar to the "NO WARRANTY" disclaimer below
  15  *    ("Disclaimer") and any redistribution must be conditioned upon
  16  *    including a substantially similar Disclaimer requirement for further
  17  *    binary redistribution.
  18  * 3. Neither the names of the above-listed copyright holders nor the names
  19  *    of any contributors may be used to endorse or promote products derived
  20  *    from this software without specific prior written permission.
  21  *
  22  * Alternatively, this software may be distributed under the terms of the
  23  * GNU General Public License ("GPL") version 2 as published by the Free
  24  * Software Foundation.
  25  *
  26  * NO WARRANTY
  27  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
  28  * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
  29  * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
  30  * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
  31  * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
  32  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
  33  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
  34  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
  35  * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
  36  * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
  37  * POSSIBILITY OF SUCH DAMAGES.
  38  *
  39  */
  40
  41 #include <linux/slab.h>
  42 #include "pm8001_sas.h"
  43 #include "pm8001_chips.h"
  44 #include "pm80xx_hwi.h"
  45
  46 static ulong logging_level = PM8001_FAIL_LOGGING | PM8001_IOERR_LOGGING |
  47                                 PM8001_EVENT_LOGGING | PM8001_INIT_LOGGING;
  48 module_param(logging_level, ulong, 0644);
  49 MODULE_PARM_DESC(logging_level, " bits for enabling logging info.");
  50
  51 static ulong link_rate = LINKRATE_15 | LINKRATE_30 | LINKRATE_60 | LINKRATE_120;
  52 module_param(link_rate, ulong, 0644);
  53 MODULE_PARM_DESC(link_rate, "Enable link rate.\n"
  54                 " 1: Link rate 1.5G\n"
  55                 " 2: Link rate 3.0G\n"
  56                 " 4: Link rate 6.0G\n"
  57                 " 8: Link rate 12.0G\n");
  58
  59 bool pm8001_use_msix = true;
  60 module_param_named(use_msix, pm8001_use_msix, bool, 0444);
  61 MODULE_PARM_DESC(zoned, "Use MSIX interrupts. Default: true");
  62
  63 static bool pm8001_use_tasklet = true;
  64 module_param_named(use_tasklet, pm8001_use_tasklet, bool, 0444);
  65 MODULE_PARM_DESC(zoned, "Use MSIX interrupts. Default: true");
  66
  67 static bool pm8001_read_wwn = true;
  68 module_param_named(read_wwn, pm8001_read_wwn, bool, 0444);
  69 MODULE_PARM_DESC(zoned, "Get WWN from the controller. Default: true");
  70
  71 static struct scsi_transport_template *pm8001_stt;
  72 static int pm8001_init_ccb_tag(struct pm8001_hba_info *);
  73
  74 /*
  75  * chip info structure to identify chip key functionality as
  76  * encryption available/not, no of ports, hw specific function ref
  77  */
  78 static const struct pm8001_chip_info pm8001_chips[] = {
  79         [chip_8001] = {0,  8, &pm8001_8001_dispatch,},
  80         [chip_8008] = {0,  8, &pm8001_80xx_dispatch,},
  81         [chip_8009] = {1,  8, &pm8001_80xx_dispatch,},
  82         [chip_8018] = {0,  16, &pm8001_80xx_dispatch,},
  83         [chip_8019] = {1,  16, &pm8001_80xx_dispatch,},
  84         [chip_8074] = {0,  8, &pm8001_80xx_dispatch,},
  85         [chip_8076] = {0,  16, &pm8001_80xx_dispatch,},
  86         [chip_8077] = {0,  16, &pm8001_80xx_dispatch,},
  87         [chip_8006] = {0,  16, &pm8001_80xx_dispatch,},
  88         [chip_8070] = {0,  8, &pm8001_80xx_dispatch,},
  89         [chip_8072] = {0,  16, &pm8001_80xx_dispatch,},
  90 };
  91 static int pm8001_id;
  92
  93 LIST_HEAD(hba_list);
  94
  95 struct workqueue_struct *pm8001_wq;
  96
  97 static void pm8001_map_queues(struct Scsi_Host *shost)
  98 {
  99         struct sas_ha_struct *sha = SHOST_TO_SAS_HA(shost);
 100         struct pm8001_hba_info *pm8001_ha = sha->lldd_ha;
 101         struct blk_mq_queue_map *qmap = &shost->tag_set.map[HCTX_TYPE_DEFAULT];
 102
 103         if (pm8001_ha->number_of_intr > 1)
 104                 blk_mq_pci_map_queues(qmap, pm8001_ha->pdev, 1);
 105
 106         return blk_mq_map_queues(qmap);
 107 }
 108
 109 /*
 110  * The main structure which LLDD must register for scsi core.
 111  */
 112 static const struct scsi_host_template pm8001_sht = {
 113         .module                 = THIS_MODULE,
 114         .name                   = DRV_NAME,
 115         .proc_name              = DRV_NAME,
 116         .queuecommand           = sas_queuecommand,
 117         .dma_need_drain         = ata_scsi_dma_need_drain,
 118         .target_alloc           = sas_target_alloc,
 119         .slave_configure        = sas_slave_configure,
 120         .scan_finished          = pm8001_scan_finished,
 121         .scan_start             = pm8001_scan_start,
 122         .change_queue_depth     = sas_change_queue_depth,
 123         .bios_param             = sas_bios_param,
 124         .can_queue              = 1,
 125         .this_id                = -1,
 126         .sg_tablesize           = PM8001_MAX_DMA_SG,
 127         .max_sectors            = SCSI_DEFAULT_MAX_SECTORS,
 128         .eh_device_reset_handler = sas_eh_device_reset_handler,
 129         .eh_target_reset_handler = sas_eh_target_reset_handler,
 130         .slave_alloc            = sas_slave_alloc,
 131         .target_destroy         = sas_target_destroy,
 132         .ioctl                  = sas_ioctl,
 133 #ifdef CONFIG_COMPAT
 134         .compat_ioctl           = sas_ioctl,
 135 #endif
 136         .shost_groups           = pm8001_host_groups,
 137         .track_queue_depth      = 1,
 138         .cmd_per_lun            = 32,
 139         .map_queues             = pm8001_map_queues,
 140 };
 141
 142 /*
 143  * Sas layer call this function to execute specific task.
 144  */
 145 static struct sas_domain_function_template pm8001_transport_ops = {
 146         .lldd_dev_found         = pm8001_dev_found,
 147         .lldd_dev_gone          = pm8001_dev_gone,
 148
 149         .lldd_execute_task      = pm8001_queue_command,
 150         .lldd_control_phy       = pm8001_phy_control,
 151
 152         .lldd_abort_task        = pm8001_abort_task,
 153         .lldd_abort_task_set    = sas_abort_task_set,
 154         .lldd_clear_task_set    = pm8001_clear_task_set,
 155         .lldd_I_T_nexus_reset   = pm8001_I_T_nexus_reset,
 156         .lldd_lu_reset          = pm8001_lu_reset,
 157         .lldd_query_task        = pm8001_query_task,
 158         .lldd_port_formed       = pm8001_port_formed,
 159         .lldd_tmf_exec_complete = pm8001_setds_completion,
 160         .lldd_tmf_aborted       = pm8001_tmf_aborted,
 161 };
 162
 163 /**
 164  * pm8001_phy_init - initiate our adapter phys
 165  * @pm8001_ha: our hba structure.
 166  * @phy_id: phy id.
 167  */
 168 static void pm8001_phy_init(struct pm8001_hba_info *pm8001_ha, int phy_id)
 169 {
 170         struct pm8001_phy *phy = &pm8001_ha->phy[phy_id];
 171         struct asd_sas_phy *sas_phy = &phy->sas_phy;
 172         phy->phy_state = PHY_LINK_DISABLE;
 173         phy->pm8001_ha = pm8001_ha;
 174         phy->minimum_linkrate = SAS_LINK_RATE_1_5_GBPS;
 175         phy->maximum_linkrate = SAS_LINK_RATE_6_0_GBPS;
 176         sas_phy->enabled = (phy_id < pm8001_ha->chip->n_phy) ? 1 : 0;
 177         sas_phy->iproto = SAS_PROTOCOL_ALL;
 178         sas_phy->tproto = 0;
 179         sas_phy->role = PHY_ROLE_INITIATOR;
 180         sas_phy->oob_mode = OOB_NOT_CONNECTED;
 181         sas_phy->linkrate = SAS_LINK_RATE_UNKNOWN;
 182         sas_phy->id = phy_id;
 183         sas_phy->sas_addr = (u8 *)&phy->dev_sas_addr;
 184         sas_phy->frame_rcvd = &phy->frame_rcvd[0];
 185         sas_phy->ha = (struct sas_ha_struct *)pm8001_ha->shost->hostdata;
 186         sas_phy->lldd_phy = phy;
 187 }
 188
 189 /**
 190  * pm8001_free - free hba
 191  * @pm8001_ha:  our hba structure.
 192  */
 193 static void pm8001_free(struct pm8001_hba_info *pm8001_ha)
 194 {
 195         int i;
 196
 197         if (!pm8001_ha)
 198                 return;
 199
 200         for (i = 0; i < USI_MAX_MEMCNT; i++) {
 201                 if (pm8001_ha->memoryMap.region[i].virt_ptr != NULL) {
 202                         dma_free_coherent(&pm8001_ha->pdev->dev,
 203                                 (pm8001_ha->memoryMap.region[i].total_len +
 204                                 pm8001_ha->memoryMap.region[i].alignment),
 205                                 pm8001_ha->memoryMap.region[i].virt_ptr,
 206                                 pm8001_ha->memoryMap.region[i].phys_addr);
 207                         }
 208         }
 209         PM8001_CHIP_DISP->chip_iounmap(pm8001_ha);
 210         flush_workqueue(pm8001_wq);
 211         bitmap_free(pm8001_ha->rsvd_tags);
 212         kfree(pm8001_ha);
 213 }
 214
 215 /**
 216  * pm8001_tasklet() - tasklet for 64 msi-x interrupt handler
 217  * @opaque: the passed general host adapter struct
 218  * Note: pm8001_tasklet is common for pm8001 & pm80xx
 219  */
 220 static void pm8001_tasklet(unsigned long opaque)
 221 {
 222         struct isr_param *irq_vector = (struct isr_param *)opaque;
 223         struct pm8001_hba_info *pm8001_ha = irq_vector->drv_inst;
 224
 225         if (WARN_ON_ONCE(!pm8001_ha))
 226                 return;
 227
 228         PM8001_CHIP_DISP->isr(pm8001_ha, irq_vector->irq_id);
 229 }
 230
 231 static void pm8001_init_tasklet(struct pm8001_hba_info *pm8001_ha)
 232 {
 233         int i;
 234
 235         if (!pm8001_use_tasklet)
 236                 return;
 237
 238         /*  Tasklet for non msi-x interrupt handler */
 239         if ((!pm8001_ha->pdev->msix_cap || !pci_msi_enabled()) ||
 240             (pm8001_ha->chip_id == chip_8001)) {
 241                 tasklet_init(&pm8001_ha->tasklet[0], pm8001_tasklet,
 242                              (unsigned long)&(pm8001_ha->irq_vector[0]));
 243                 return;
 244         }
 245         for (i = 0; i < PM8001_MAX_MSIX_VEC; i++)
 246                 tasklet_init(&pm8001_ha->tasklet[i], pm8001_tasklet,
 247                              (unsigned long)&(pm8001_ha->irq_vector[i]));
 248 }
 249
 250 static void pm8001_kill_tasklet(struct pm8001_hba_info *pm8001_ha)
 251 {
 252         int i;
 253
 254         if (!pm8001_use_tasklet)
 255                 return;
 256
 257         /* For non-msix and msix interrupts */
 258         if ((!pm8001_ha->pdev->msix_cap || !pci_msi_enabled()) ||
 259             (pm8001_ha->chip_id == chip_8001)) {
 260                 tasklet_kill(&pm8001_ha->tasklet[0]);
 261                 return;
 262         }
 263
 264         for (i = 0; i < PM8001_MAX_MSIX_VEC; i++)
 265                 tasklet_kill(&pm8001_ha->tasklet[i]);
 266 }
 267
 268 static irqreturn_t pm8001_handle_irq(struct pm8001_hba_info *pm8001_ha,
 269                                      int irq)
 270 {
 271         if (unlikely(!pm8001_ha))
 272                 return IRQ_NONE;
 273
 274         if (!PM8001_CHIP_DISP->is_our_interrupt(pm8001_ha))
 275                 return IRQ_NONE;
 276
 277         if (!pm8001_use_tasklet)
 278                 return PM8001_CHIP_DISP->isr(pm8001_ha, irq);
 279
 280         tasklet_schedule(&pm8001_ha->tasklet[irq]);
 281         return IRQ_HANDLED;
 282 }
 283
 284 /**
 285  * pm8001_interrupt_handler_msix - main MSIX interrupt handler.
 286  * It obtains the vector number and calls the equivalent bottom
 287  * half or services directly.
 288  * @irq: interrupt number
 289  * @opaque: the passed outbound queue/vector. Host structure is
 290  * retrieved from the same.
 291  */
 292 static irqreturn_t pm8001_interrupt_handler_msix(int irq, void *opaque)
 293 {
 294         struct isr_param *irq_vector = (struct isr_param *)opaque;
 295         struct pm8001_hba_info *pm8001_ha = irq_vector->drv_inst;
 296
 297         return pm8001_handle_irq(pm8001_ha, irq_vector->irq_id);
 298 }
 299
 300 /**
 301  * pm8001_interrupt_handler_intx - main INTx interrupt handler.
 302  * @irq: interrupt number
 303  * @dev_id: sas_ha structure. The HBA is retrieved from sas_ha structure.
 304  */
 305
 306 static irqreturn_t pm8001_interrupt_handler_intx(int irq, void *dev_id)
 307 {
 308         struct sas_ha_struct *sha = dev_id;
 309         struct pm8001_hba_info *pm8001_ha = sha->lldd_ha;
 310
 311         return pm8001_handle_irq(pm8001_ha, 0);
 312 }
 313
 314 static u32 pm8001_request_irq(struct pm8001_hba_info *pm8001_ha);
 315 static void pm8001_free_irq(struct pm8001_hba_info *pm8001_ha);
 316
 317 /**
 318  * pm8001_alloc - initiate our hba structure and 6 DMAs area.
 319  * @pm8001_ha: our hba structure.
 320  * @ent: PCI device ID structure to match on
 321  */
 322 static int pm8001_alloc(struct pm8001_hba_info *pm8001_ha,
 323                         const struct pci_device_id *ent)
 324 {
 325         int i, count = 0, rc = 0;
 326         u32 ci_offset, ib_offset, ob_offset, pi_offset;
 327         struct inbound_queue_table *ibq;
 328         struct outbound_queue_table *obq;
 329
 330         spin_lock_init(&pm8001_ha->lock);
 331         spin_lock_init(&pm8001_ha->bitmap_lock);
 332         pm8001_dbg(pm8001_ha, INIT, "pm8001_alloc: PHY:%x\n",
 333                    pm8001_ha->chip->n_phy);
 334
 335         /* Request Interrupt */
 336         rc = pm8001_request_irq(pm8001_ha);
 337         if (rc)
 338                 goto err_out;
 339
 340         count = pm8001_ha->max_q_num;
 341         /* Queues are chosen based on the number of cores/msix availability */
 342         ib_offset = pm8001_ha->ib_offset  = USI_MAX_MEMCNT_BASE;
 343         ci_offset = pm8001_ha->ci_offset  = ib_offset + count;
 344         ob_offset = pm8001_ha->ob_offset  = ci_offset + count;
 345         pi_offset = pm8001_ha->pi_offset  = ob_offset + count;
 346         pm8001_ha->max_memcnt = pi_offset + count;
 347
 348         for (i = 0; i < pm8001_ha->chip->n_phy; i++) {
 349                 pm8001_phy_init(pm8001_ha, i);
 350                 pm8001_ha->port[i].wide_port_phymap = 0;
 351                 pm8001_ha->port[i].port_attached = 0;
 352                 pm8001_ha->port[i].port_state = 0;
 353                 INIT_LIST_HEAD(&pm8001_ha->port[i].list);
 354         }
 355
 356         /* MPI Memory region 1 for AAP Event Log for fw */
 357         pm8001_ha->memoryMap.region[AAP1].num_elements = 1;
 358         pm8001_ha->memoryMap.region[AAP1].element_size = PM8001_EVENT_LOG_SIZE;
 359         pm8001_ha->memoryMap.region[AAP1].total_len = PM8001_EVENT_LOG_SIZE;
 360         pm8001_ha->memoryMap.region[AAP1].alignment = 32;
 361
 362         /* MPI Memory region 2 for IOP Event Log for fw */
 363         pm8001_ha->memoryMap.region[IOP].num_elements = 1;
 364         pm8001_ha->memoryMap.region[IOP].element_size = PM8001_EVENT_LOG_SIZE;
 365         pm8001_ha->memoryMap.region[IOP].total_len = PM8001_EVENT_LOG_SIZE;
 366         pm8001_ha->memoryMap.region[IOP].alignment = 32;
 367
 368         for (i = 0; i < count; i++) {
 369                 ibq = &pm8001_ha->inbnd_q_tbl[i];
 370                 spin_lock_init(&ibq->iq_lock);
 371                 /* MPI Memory region 3 for consumer Index of inbound queues */
 372                 pm8001_ha->memoryMap.region[ci_offset+i].num_elements = 1;
 373                 pm8001_ha->memoryMap.region[ci_offset+i].element_size = 4;
 374                 pm8001_ha->memoryMap.region[ci_offset+i].total_len = 4;
 375                 pm8001_ha->memoryMap.region[ci_offset+i].alignment = 4;
 376
 377                 if ((ent->driver_data) != chip_8001) {
 378                         /* MPI Memory region 5 inbound queues */
 379                         pm8001_ha->memoryMap.region[ib_offset+i].num_elements =
 380                                                 PM8001_MPI_QUEUE;
 381                         pm8001_ha->memoryMap.region[ib_offset+i].element_size
 382                                                                 = 128;
 383                         pm8001_ha->memoryMap.region[ib_offset+i].total_len =
 384                                                 PM8001_MPI_QUEUE * 128;
 385                         pm8001_ha->memoryMap.region[ib_offset+i].alignment
 386                                                                 = 128;
 387                 } else {
 388                         pm8001_ha->memoryMap.region[ib_offset+i].num_elements =
 389                                                 PM8001_MPI_QUEUE;
 390                         pm8001_ha->memoryMap.region[ib_offset+i].element_size
 391                                                                 = 64;
 392                         pm8001_ha->memoryMap.region[ib_offset+i].total_len =
 393                                                 PM8001_MPI_QUEUE * 64;
 394                         pm8001_ha->memoryMap.region[ib_offset+i].alignment = 64;
 395                 }
 396         }
 397
 398         for (i = 0; i < count; i++) {
 399                 obq = &pm8001_ha->outbnd_q_tbl[i];
 400                 spin_lock_init(&obq->oq_lock);
 401                 /* MPI Memory region 4 for producer Index of outbound queues */
 402                 pm8001_ha->memoryMap.region[pi_offset+i].num_elements = 1;
 403                 pm8001_ha->memoryMap.region[pi_offset+i].element_size = 4;
 404                 pm8001_ha->memoryMap.region[pi_offset+i].total_len = 4;
 405                 pm8001_ha->memoryMap.region[pi_offset+i].alignment = 4;
 406
 407                 if (ent->driver_data != chip_8001) {
 408                         /* MPI Memory region 6 Outbound queues */
 409                         pm8001_ha->memoryMap.region[ob_offset+i].num_elements =
 410                                                 PM8001_MPI_QUEUE;
 411                         pm8001_ha->memoryMap.region[ob_offset+i].element_size
 412                                                                 = 128;
 413                         pm8001_ha->memoryMap.region[ob_offset+i].total_len =
 414                                                 PM8001_MPI_QUEUE * 128;
 415                         pm8001_ha->memoryMap.region[ob_offset+i].alignment
 416                                                                 = 128;
 417                 } else {
 418                         /* MPI Memory region 6 Outbound queues */
 419                         pm8001_ha->memoryMap.region[ob_offset+i].num_elements =
 420                                                 PM8001_MPI_QUEUE;
 421                         pm8001_ha->memoryMap.region[ob_offset+i].element_size
 422                                                                 = 64;
 423                         pm8001_ha->memoryMap.region[ob_offset+i].total_len =
 424                                                 PM8001_MPI_QUEUE * 64;
 425                         pm8001_ha->memoryMap.region[ob_offset+i].alignment = 64;
 426                 }
 427
 428         }
 429         /* Memory region write DMA*/
 430         pm8001_ha->memoryMap.region[NVMD].num_elements = 1;
 431         pm8001_ha->memoryMap.region[NVMD].element_size = 4096;
 432         pm8001_ha->memoryMap.region[NVMD].total_len = 4096;
 433
 434         /* Memory region for fw flash */
 435         pm8001_ha->memoryMap.region[FW_FLASH].total_len = 4096;
 436
 437         pm8001_ha->memoryMap.region[FORENSIC_MEM].num_elements = 1;
 438         pm8001_ha->memoryMap.region[FORENSIC_MEM].total_len = 0x10000;
 439         pm8001_ha->memoryMap.region[FORENSIC_MEM].element_size = 0x10000;
 440         pm8001_ha->memoryMap.region[FORENSIC_MEM].alignment = 0x10000;
 441         for (i = 0; i < pm8001_ha->max_memcnt; i++) {
 442                 struct mpi_mem *region = &pm8001_ha->memoryMap.region[i];
 443
 444                 if (pm8001_mem_alloc(pm8001_ha->pdev,
 445                                      &region->virt_ptr,
 446                                      &region->phys_addr,
 447                                      &region->phys_addr_hi,
 448                                      &region->phys_addr_lo,
 449                                      region->total_len,
 450                                      region->alignment) != 0) {
 451                         pm8001_dbg(pm8001_ha, FAIL, "Mem%d alloc failed\n", i);
 452                         goto err_out;
 453                 }
 454         }
 455
 456         /* Memory region for devices*/
 457         pm8001_ha->devices = kzalloc(PM8001_MAX_DEVICES
 458                                 * sizeof(struct pm8001_device), GFP_KERNEL);
 459         if (!pm8001_ha->devices) {
 460                 rc = -ENOMEM;
 461                 goto err_out_nodev;
 462         }
 463         for (i = 0; i < PM8001_MAX_DEVICES; i++) {
 464                 pm8001_ha->devices[i].dev_type = SAS_PHY_UNUSED;
 465                 pm8001_ha->devices[i].id = i;
 466                 pm8001_ha->devices[i].device_id = PM8001_MAX_DEVICES;
 467                 atomic_set(&pm8001_ha->devices[i].running_req, 0);
 468         }
 469         pm8001_ha->flags = PM8001F_INIT_TIME;
 470         return 0;
 471
 472 err_out_nodev:
 473         for (i = 0; i < pm8001_ha->max_memcnt; i++) {
 474                 if (pm8001_ha->memoryMap.region[i].virt_ptr != NULL) {
 475                         dma_free_coherent(&pm8001_ha->pdev->dev,
 476                                 (pm8001_ha->memoryMap.region[i].total_len +
 477                                 pm8001_ha->memoryMap.region[i].alignment),
 478                                 pm8001_ha->memoryMap.region[i].virt_ptr,
 479                                 pm8001_ha->memoryMap.region[i].phys_addr);
 480                 }
 481         }
 482 err_out:
 483         return 1;
 484 }
 485
 486 /**
 487  * pm8001_ioremap - remap the pci high physical address to kernel virtual
 488  * address so that we can access them.
 489  * @pm8001_ha: our hba structure.
 490  */
 491 static int pm8001_ioremap(struct pm8001_hba_info *pm8001_ha)
 492 {
 493         u32 bar;
 494         u32 logicalBar = 0;
 495         struct pci_dev *pdev;
 496
 497         pdev = pm8001_ha->pdev;
 498         /* map pci mem (PMC pci base 0-3)*/
 499         for (bar = 0; bar < PCI_STD_NUM_BARS; bar++) {
 500                 /*
 501                 ** logical BARs for SPC:
 502                 ** bar 0 and 1 - logical BAR0
 503                 ** bar 2 and 3 - logical BAR1
 504                 ** bar4 - logical BAR2
 505                 ** bar5 - logical BAR3
 506                 ** Skip the appropriate assignments:
 507                 */
 508                 if ((bar == 1) || (bar == 3))
 509                         continue;
 510                 if (pci_resource_flags(pdev, bar) & IORESOURCE_MEM) {
 511                         pm8001_ha->io_mem[logicalBar].membase =
 512                                 pci_resource_start(pdev, bar);
 513                         pm8001_ha->io_mem[logicalBar].memsize =
 514                                 pci_resource_len(pdev, bar);
 515                         pm8001_ha->io_mem[logicalBar].memvirtaddr =
 516                                 ioremap(pm8001_ha->io_mem[logicalBar].membase,
 517                                 pm8001_ha->io_mem[logicalBar].memsize);
 518                         if (!pm8001_ha->io_mem[logicalBar].memvirtaddr) {
 519                                 pm8001_dbg(pm8001_ha, INIT,
 520                                         "Failed to ioremap bar %d, logicalBar %d",
 521                                    bar, logicalBar);
 522                                 return -ENOMEM;
 523                         }
 524                         pm8001_dbg(pm8001_ha, INIT,
 525                                    "base addr %llx virt_addr=%llx len=%d\n",
 526                                    (u64)pm8001_ha->io_mem[logicalBar].membase,
 527                                    (u64)(unsigned long)
 528                                    pm8001_ha->io_mem[logicalBar].memvirtaddr,
 529                                    pm8001_ha->io_mem[logicalBar].memsize);
 530                 } else {
 531                         pm8001_ha->io_mem[logicalBar].membase   = 0;
 532                         pm8001_ha->io_mem[logicalBar].memsize   = 0;
 533                         pm8001_ha->io_mem[logicalBar].memvirtaddr = NULL;
 534                 }
 535                 logicalBar++;
 536         }
 537         return 0;
 538 }
 539
 540 /**
 541  * pm8001_pci_alloc - initialize our ha card structure
 542  * @pdev: pci device.
 543  * @ent: ent
 544  * @shost: scsi host struct which has been initialized before.
 545  */
 546 static struct pm8001_hba_info *pm8001_pci_alloc(struct pci_dev *pdev,
 547                                  const struct pci_device_id *ent,
 548                                 struct Scsi_Host *shost)
 549
 550 {
 551         struct pm8001_hba_info *pm8001_ha;
 552         struct sas_ha_struct *sha = SHOST_TO_SAS_HA(shost);
 553
 554         pm8001_ha = sha->lldd_ha;
 555         if (!pm8001_ha)
 556                 return NULL;
 557
 558         pm8001_ha->pdev = pdev;
 559         pm8001_ha->dev = &pdev->dev;
 560         pm8001_ha->chip_id = ent->driver_data;
 561         pm8001_ha->chip = &pm8001_chips[pm8001_ha->chip_id];
 562         pm8001_ha->irq = pdev->irq;
 563         pm8001_ha->sas = sha;
 564         pm8001_ha->shost = shost;
 565         pm8001_ha->id = pm8001_id++;
 566         pm8001_ha->logging_level = logging_level;
 567         pm8001_ha->non_fatal_count = 0;
 568         if (link_rate >= 1 && link_rate <= 15)
 569                 pm8001_ha->link_rate = (link_rate << 8);
 570         else {
 571                 pm8001_ha->link_rate = LINKRATE_15 | LINKRATE_30 |
 572                         LINKRATE_60 | LINKRATE_120;
 573                 pm8001_dbg(pm8001_ha, FAIL,
 574                            "Setting link rate to default value\n");
 575         }
 576         sprintf(pm8001_ha->name, "%s%d", DRV_NAME, pm8001_ha->id);
 577         /* IOMB size is 128 for 8088/89 controllers */
 578         if (pm8001_ha->chip_id != chip_8001)
 579                 pm8001_ha->iomb_size = IOMB_SIZE_SPCV;
 580         else
 581                 pm8001_ha->iomb_size = IOMB_SIZE_SPC;
 582
 583         pm8001_init_tasklet(pm8001_ha);
 584
 585         if (pm8001_ioremap(pm8001_ha))
 586                 goto failed_pci_alloc;
 587         if (!pm8001_alloc(pm8001_ha, ent))
 588                 return pm8001_ha;
 589 failed_pci_alloc:
 590         pm8001_free(pm8001_ha);
 591         return NULL;
 592 }
 593
 594 /**
 595  * pci_go_44 - pm8001 specified, its DMA is 44 bit rather than 64 bit
 596  * @pdev: pci device.
 597  */
 598 static int pci_go_44(struct pci_dev *pdev)
 599 {
 600         int rc;
 601
 602         rc = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(44));
 603         if (rc) {
 604                 rc = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32));
 605                 if (rc)
 606                         dev_printk(KERN_ERR, &pdev->dev,
 607                                 "32-bit DMA enable failed\n");
 608         }
 609         return rc;
 610 }
 611
 612 /**
 613  * pm8001_prep_sas_ha_init - allocate memory in general hba struct && init them.
 614  * @shost: scsi host which has been allocated outside.
 615  * @chip_info: our ha struct.
 616  */
 617 static int pm8001_prep_sas_ha_init(struct Scsi_Host *shost,
 618                                    const struct pm8001_chip_info *chip_info)
 619 {
 620         int phy_nr, port_nr;
 621         struct asd_sas_phy **arr_phy;
 622         struct asd_sas_port **arr_port;
 623         struct sas_ha_struct *sha = SHOST_TO_SAS_HA(shost);
 624
 625         phy_nr = chip_info->n_phy;
 626         port_nr = phy_nr;
 627         memset(sha, 0x00, sizeof(*sha));
 628         arr_phy = kcalloc(phy_nr, sizeof(void *), GFP_KERNEL);
 629         if (!arr_phy)
 630                 goto exit;
 631         arr_port = kcalloc(port_nr, sizeof(void *), GFP_KERNEL);
 632         if (!arr_port)
 633                 goto exit_free2;
 634
 635         sha->sas_phy = arr_phy;
 636         sha->sas_port = arr_port;
 637         sha->lldd_ha = kzalloc(sizeof(struct pm8001_hba_info), GFP_KERNEL);
 638         if (!sha->lldd_ha)
 639                 goto exit_free1;
 640
 641         shost->transportt = pm8001_stt;
 642         shost->max_id = PM8001_MAX_DEVICES;
 643         shost->unique_id = pm8001_id;
 644         shost->max_cmd_len = 16;
 645         return 0;
 646 exit_free1:
 647         kfree(arr_port);
 648 exit_free2:
 649         kfree(arr_phy);
 650 exit:
 651         return -1;
 652 }
 653
 654 /**
 655  * pm8001_post_sas_ha_init - initialize general hba struct defined in libsas
 656  * @shost: scsi host which has been allocated outside
 657  * @chip_info: our ha struct.
 658  */
 659 static void  pm8001_post_sas_ha_init(struct Scsi_Host *shost,
 660                                      const struct pm8001_chip_info *chip_info)
 661 {
 662         int i = 0;
 663         struct pm8001_hba_info *pm8001_ha;
 664         struct sas_ha_struct *sha = SHOST_TO_SAS_HA(shost);
 665
 666         pm8001_ha = sha->lldd_ha;
 667         for (i = 0; i < chip_info->n_phy; i++) {
 668                 sha->sas_phy[i] = &pm8001_ha->phy[i].sas_phy;
 669                 sha->sas_port[i] = &pm8001_ha->port[i].sas_port;
 670                 sha->sas_phy[i]->sas_addr =
 671                         (u8 *)&pm8001_ha->phy[i].dev_sas_addr;
 672         }
 673         sha->sas_ha_name = DRV_NAME;
 674         sha->dev = pm8001_ha->dev;
 675         sha->strict_wide_ports = 1;
 676         sha->sas_addr = &pm8001_ha->sas_addr[0];
 677         sha->num_phys = chip_info->n_phy;
 678         sha->shost = shost;
 679 }
 680
 681 /**
 682  * pm8001_init_sas_add - initialize sas address
 683  * @pm8001_ha: our ha struct.
 684  *
 685  * Currently we just set the fixed SAS address to our HBA, for manufacture,
 686  * it should read from the EEPROM
 687  */
 688 static int pm8001_init_sas_add(struct pm8001_hba_info *pm8001_ha)
 689 {
 690         DECLARE_COMPLETION_ONSTACK(completion);
 691         struct pm8001_ioctl_payload payload;
 692         unsigned long time_remaining;
 693         u8 sas_add[8];
 694         u16 deviceid;
 695         int rc;
 696         u8 i, j;
 697
 698         if (!pm8001_read_wwn) {
 699                 __be64 dev_sas_addr = cpu_to_be64(0x50010c600047f9d0ULL);
 700
 701                 for (i = 0; i < pm8001_ha->chip->n_phy; i++)
 702                         memcpy(&pm8001_ha->phy[i].dev_sas_addr, &dev_sas_addr,
 703                                SAS_ADDR_SIZE);
 704                 memcpy(pm8001_ha->sas_addr, &pm8001_ha->phy[0].dev_sas_addr,
 705                        SAS_ADDR_SIZE);
 706                 return 0;
 707         }
 708
 709         /*
 710          * For new SPC controllers WWN is stored in flash vpd. For SPC/SPCve
 711          * controllers WWN is stored in EEPROM. And for Older SPC WWN is stored
 712          * in NVMD.
 713          */
 714         if (PM8001_CHIP_DISP->fatal_errors(pm8001_ha)) {
 715                 pm8001_dbg(pm8001_ha, FAIL, "controller is in fatal error state\n");
 716                 return -EIO;
 717         }
 718
 719         pci_read_config_word(pm8001_ha->pdev, PCI_DEVICE_ID, &deviceid);
 720         pm8001_ha->nvmd_completion = &completion;
 721
 722         if (pm8001_ha->chip_id == chip_8001) {
 723                 if (deviceid == 0x8081 || deviceid == 0x0042) {
 724                         payload.minor_function = 4;
 725                         payload.rd_length = 4096;
 726                 } else {
 727                         payload.minor_function = 0;
 728                         payload.rd_length = 128;
 729                 }
 730         } else if ((pm8001_ha->chip_id == chip_8070 ||
 731                         pm8001_ha->chip_id == chip_8072) &&
 732                         pm8001_ha->pdev->subsystem_vendor == PCI_VENDOR_ID_ATTO) {
 733                 payload.minor_function = 4;
 734                 payload.rd_length = 4096;
 735         } else {
 736                 payload.minor_function = 1;
 737                 payload.rd_length = 4096;
 738         }
 739         payload.offset = 0;
 740         payload.func_specific = kzalloc(payload.rd_length, GFP_KERNEL);
 741         if (!payload.func_specific) {
 742                 pm8001_dbg(pm8001_ha, FAIL, "mem alloc fail\n");
 743                 return -ENOMEM;
 744         }
 745         rc = PM8001_CHIP_DISP->get_nvmd_req(pm8001_ha, &payload);
 746         if (rc) {
 747                 kfree(payload.func_specific);
 748                 pm8001_dbg(pm8001_ha, FAIL, "nvmd failed\n");
 749                 return -EIO;
 750         }
 751         time_remaining = wait_for_completion_timeout(&completion,
 752                                 msecs_to_jiffies(60*1000)); // 1 min
 753         if (!time_remaining) {
 754                 kfree(payload.func_specific);
 755                 pm8001_dbg(pm8001_ha, FAIL, "get_nvmd_req timeout\n");
 756                 return -EIO;
 757         }
 758
 759
 760         for (i = 0, j = 0; i <= 7; i++, j++) {
 761                 if (pm8001_ha->chip_id == chip_8001) {
 762                         if (deviceid == 0x8081)
 763                                 pm8001_ha->sas_addr[j] =
 764                                         payload.func_specific[0x704 + i];
 765                         else if (deviceid == 0x0042)
 766                                 pm8001_ha->sas_addr[j] =
 767                                         payload.func_specific[0x010 + i];
 768                 } else if ((pm8001_ha->chip_id == chip_8070 ||
 769                                 pm8001_ha->chip_id == chip_8072) &&
 770                                 pm8001_ha->pdev->subsystem_vendor == PCI_VENDOR_ID_ATTO) {
 771                         pm8001_ha->sas_addr[j] =
 772                                         payload.func_specific[0x010 + i];
 773                 } else
 774                         pm8001_ha->sas_addr[j] =
 775                                         payload.func_specific[0x804 + i];
 776         }
 777         memcpy(sas_add, pm8001_ha->sas_addr, SAS_ADDR_SIZE);
 778         for (i = 0; i < pm8001_ha->chip->n_phy; i++) {
 779                 if (i && ((i % 4) == 0))
 780                         sas_add[7] = sas_add[7] + 4;
 781                 memcpy(&pm8001_ha->phy[i].dev_sas_addr,
 782                         sas_add, SAS_ADDR_SIZE);
 783                 pm8001_dbg(pm8001_ha, INIT, "phy %d sas_addr = %016llx\n", i,
 784                            pm8001_ha->phy[i].dev_sas_addr);
 785         }
 786         kfree(payload.func_specific);
 787
 788         return 0;
 789 }
 790
 791 /*
 792  * pm8001_get_phy_settings_info : Read phy setting values.
 793  * @pm8001_ha : our hba.
 794  */
 795 static int pm8001_get_phy_settings_info(struct pm8001_hba_info *pm8001_ha)
 796 {
 797         DECLARE_COMPLETION_ONSTACK(completion);
 798         struct pm8001_ioctl_payload payload;
 799         int rc;
 800
 801         if (!pm8001_read_wwn)
 802                 return 0;
 803
 804         pm8001_ha->nvmd_completion = &completion;
 805         /* SAS ADDRESS read from flash / EEPROM */
 806         payload.minor_function = 6;
 807         payload.offset = 0;
 808         payload.rd_length = 4096;
 809         payload.func_specific = kzalloc(4096, GFP_KERNEL);
 810         if (!payload.func_specific)
 811                 return -ENOMEM;
 812         /* Read phy setting values from flash */
 813         rc = PM8001_CHIP_DISP->get_nvmd_req(pm8001_ha, &payload);
 814         if (rc) {
 815                 kfree(payload.func_specific);
 816                 pm8001_dbg(pm8001_ha, INIT, "nvmd failed\n");
 817                 return -ENOMEM;
 818         }
 819         wait_for_completion(&completion);
 820         pm8001_set_phy_profile(pm8001_ha, sizeof(u8), payload.func_specific);
 821         kfree(payload.func_specific);
 822
 823         return 0;
 824 }
 825
 826 struct pm8001_mpi3_phy_pg_trx_config {
 827         u32 LaneLosCfg;
 828         u32 LanePgaCfg1;
 829         u32 LanePisoCfg1;
 830         u32 LanePisoCfg2;
 831         u32 LanePisoCfg3;
 832         u32 LanePisoCfg4;
 833         u32 LanePisoCfg5;
 834         u32 LanePisoCfg6;
 835         u32 LaneBctCtrl;
 836 };
 837
 838 /**
 839  * pm8001_get_internal_phy_settings - Retrieves the internal PHY settings
 840  * @pm8001_ha : our adapter
 841  * @phycfg : PHY config page to populate
 842  */
 843 static
 844 void pm8001_get_internal_phy_settings(struct pm8001_hba_info *pm8001_ha,
 845                 struct pm8001_mpi3_phy_pg_trx_config *phycfg)
 846 {
 847         phycfg->LaneLosCfg   = 0x00000132;
 848         phycfg->LanePgaCfg1  = 0x00203949;
 849         phycfg->LanePisoCfg1 = 0x000000FF;
 850         phycfg->LanePisoCfg2 = 0xFF000001;
 851         phycfg->LanePisoCfg3 = 0xE7011300;
 852         phycfg->LanePisoCfg4 = 0x631C40C0;
 853         phycfg->LanePisoCfg5 = 0xF8102036;
 854         phycfg->LanePisoCfg6 = 0xF74A1000;
 855         phycfg->LaneBctCtrl  = 0x00FB33F8;
 856 }
 857
 858 /**
 859  * pm8001_get_external_phy_settings - Retrieves the external PHY settings
 860  * @pm8001_ha : our adapter
 861  * @phycfg : PHY config page to populate
 862  */
 863 static
 864 void pm8001_get_external_phy_settings(struct pm8001_hba_info *pm8001_ha,
 865                 struct pm8001_mpi3_phy_pg_trx_config *phycfg)
 866 {
 867         phycfg->LaneLosCfg   = 0x00000132;
 868         phycfg->LanePgaCfg1  = 0x00203949;
 869         phycfg->LanePisoCfg1 = 0x000000FF;
 870         phycfg->LanePisoCfg2 = 0xFF000001;
 871         phycfg->LanePisoCfg3 = 0xE7011300;
 872         phycfg->LanePisoCfg4 = 0x63349140;
 873         phycfg->LanePisoCfg5 = 0xF8102036;
 874         phycfg->LanePisoCfg6 = 0xF80D9300;
 875         phycfg->LaneBctCtrl  = 0x00FB33F8;
 876 }
 877
 878 /**
 879  * pm8001_get_phy_mask - Retrieves the mask that denotes if a PHY is int/ext
 880  * @pm8001_ha : our adapter
 881  * @phymask : The PHY mask
 882  */
 883 static
 884 void pm8001_get_phy_mask(struct pm8001_hba_info *pm8001_ha, int *phymask)
 885 {
 886         switch (pm8001_ha->pdev->subsystem_device) {
 887         case 0x0070: /* H1280 - 8 external 0 internal */
 888         case 0x0072: /* H12F0 - 16 external 0 internal */
 889                 *phymask = 0x0000;
 890                 break;
 891
 892         case 0x0071: /* H1208 - 0 external 8 internal */
 893         case 0x0073: /* H120F - 0 external 16 internal */
 894                 *phymask = 0xFFFF;
 895                 break;
 896
 897         case 0x0080: /* H1244 - 4 external 4 internal */
 898                 *phymask = 0x00F0;
 899                 break;
 900
 901         case 0x0081: /* H1248 - 4 external 8 internal */
 902                 *phymask = 0x0FF0;
 903                 break;
 904
 905         case 0x0082: /* H1288 - 8 external 8 internal */
 906                 *phymask = 0xFF00;
 907                 break;
 908
 909         default:
 910                 pm8001_dbg(pm8001_ha, INIT,
 911                            "Unknown subsystem device=0x%.04x\n",
 912                            pm8001_ha->pdev->subsystem_device);
 913         }
 914 }
 915
 916 /**
 917  * pm8001_set_phy_settings_ven_117c_12G() - Configure ATTO 12Gb PHY settings
 918  * @pm8001_ha : our adapter
 919  */
 920 static
 921 int pm8001_set_phy_settings_ven_117c_12G(struct pm8001_hba_info *pm8001_ha)
 922 {
 923         struct pm8001_mpi3_phy_pg_trx_config phycfg_int;
 924         struct pm8001_mpi3_phy_pg_trx_config phycfg_ext;
 925         int phymask = 0;
 926         int i = 0;
 927
 928         memset(&phycfg_int, 0, sizeof(phycfg_int));
 929         memset(&phycfg_ext, 0, sizeof(phycfg_ext));
 930
 931         pm8001_get_internal_phy_settings(pm8001_ha, &phycfg_int);
 932         pm8001_get_external_phy_settings(pm8001_ha, &phycfg_ext);
 933         pm8001_get_phy_mask(pm8001_ha, &phymask);
 934
 935         for (i = 0; i < pm8001_ha->chip->n_phy; i++) {
 936                 if (phymask & (1 << i)) {/* Internal PHY */
 937                         pm8001_set_phy_profile_single(pm8001_ha, i,
 938                                         sizeof(phycfg_int) / sizeof(u32),
 939                                         (u32 *)&phycfg_int);
 940
 941                 } else { /* External PHY */
 942                         pm8001_set_phy_profile_single(pm8001_ha, i,
 943                                         sizeof(phycfg_ext) / sizeof(u32),
 944                                         (u32 *)&phycfg_ext);
 945                 }
 946         }
 947
 948         return 0;
 949 }
 950
 951 /**
 952  * pm8001_configure_phy_settings - Configures PHY settings based on vendor ID.
 953  * @pm8001_ha : our hba.
 954  */
 955 static int pm8001_configure_phy_settings(struct pm8001_hba_info *pm8001_ha)
 956 {
 957         switch (pm8001_ha->pdev->subsystem_vendor) {
 958         case PCI_VENDOR_ID_ATTO:
 959                 if (pm8001_ha->pdev->device == 0x0042) /* 6Gb */
 960                         return 0;
 961                 else
 962                         return pm8001_set_phy_settings_ven_117c_12G(pm8001_ha);
 963
 964         case PCI_VENDOR_ID_ADAPTEC2:
 965         case 0:
 966                 return 0;
 967
 968         default:
 969                 return pm8001_get_phy_settings_info(pm8001_ha);
 970         }
 971 }
 972
 973 /**
 974  * pm8001_setup_msix - enable MSI-X interrupt
 975  * @pm8001_ha: our ha struct.
 976  */
 977 static u32 pm8001_setup_msix(struct pm8001_hba_info *pm8001_ha)
 978 {
 979         unsigned int allocated_irq_vectors;
 980         int rc;
 981
 982         /* SPCv controllers supports 64 msi-x */
 983         if (pm8001_ha->chip_id == chip_8001) {
 984                 rc = pci_alloc_irq_vectors(pm8001_ha->pdev, 1, 1,
 985                                            PCI_IRQ_MSIX);
 986         } else {
 987                 /*
 988                  * Queue index #0 is used always for housekeeping, so don't
 989                  * include in the affinity spreading.
 990                  */
 991                 struct irq_affinity desc = {
 992                         .pre_vectors = 1,
 993                 };
 994                 rc = pci_alloc_irq_vectors_affinity(
 995                                 pm8001_ha->pdev, 2, PM8001_MAX_MSIX_VEC,
 996                                 PCI_IRQ_MSIX | PCI_IRQ_AFFINITY, &desc);
 997         }
 998
 999         allocated_irq_vectors = rc;
1000         if (rc < 0)
1001                 return rc;
1002
1003         /* Assigns the number of interrupts */
1004         pm8001_ha->number_of_intr = allocated_irq_vectors;
1005
1006         /* Maximum queue number updating in HBA structure */
1007         pm8001_ha->max_q_num = allocated_irq_vectors;
1008
1009         pm8001_dbg(pm8001_ha, INIT,
1010                    "pci_alloc_irq_vectors request ret:%d no of intr %d\n",
1011                    rc, pm8001_ha->number_of_intr);
1012         return 0;
1013 }
1014
1015 static u32 pm8001_request_msix(struct pm8001_hba_info *pm8001_ha)
1016 {
1017         u32 i = 0, j = 0;
1018         int flag = 0, rc = 0;
1019         int nr_irqs = pm8001_ha->number_of_intr;
1020
1021         if (pm8001_ha->chip_id != chip_8001)
1022                 flag &= ~IRQF_SHARED;
1023
1024         pm8001_dbg(pm8001_ha, INIT,
1025                    "pci_enable_msix request number of intr %d\n",
1026                    pm8001_ha->number_of_intr);
1027
1028         if (nr_irqs > ARRAY_SIZE(pm8001_ha->intr_drvname))
1029                 nr_irqs = ARRAY_SIZE(pm8001_ha->intr_drvname);
1030
1031         for (i = 0; i < nr_irqs; i++) {
1032                 snprintf(pm8001_ha->intr_drvname[i],
1033                         sizeof(pm8001_ha->intr_drvname[0]),
1034                         "%s-%d", pm8001_ha->name, i);
1035                 pm8001_ha->irq_vector[i].irq_id = i;
1036                 pm8001_ha->irq_vector[i].drv_inst = pm8001_ha;
1037
1038                 rc = request_irq(pci_irq_vector(pm8001_ha->pdev, i),
1039                         pm8001_interrupt_handler_msix, flag,
1040                         pm8001_ha->intr_drvname[i],
1041                         &(pm8001_ha->irq_vector[i]));
1042                 if (rc) {
1043                         for (j = 0; j < i; j++) {
1044                                 free_irq(pci_irq_vector(pm8001_ha->pdev, i),
1045                                         &(pm8001_ha->irq_vector[i]));
1046                         }
1047                         pci_free_irq_vectors(pm8001_ha->pdev);
1048                         break;
1049                 }
1050         }
1051
1052         return rc;
1053 }
1054
1055 /**
1056  * pm8001_request_irq - register interrupt
1057  * @pm8001_ha: our ha struct.
1058  */
1059 static u32 pm8001_request_irq(struct pm8001_hba_info *pm8001_ha)
1060 {
1061         struct pci_dev *pdev = pm8001_ha->pdev;
1062         int rc;
1063
1064         if (pm8001_use_msix && pci_find_capability(pdev, PCI_CAP_ID_MSIX)) {
1065                 rc = pm8001_setup_msix(pm8001_ha);
1066                 if (rc) {
1067                         pm8001_dbg(pm8001_ha, FAIL,
1068                                    "pm8001_setup_irq failed [ret: %d]\n", rc);
1069                         return rc;
1070                 }
1071
1072                 if (!pdev->msix_cap || !pci_msi_enabled())
1073                         goto use_intx;
1074
1075                 rc = pm8001_request_msix(pm8001_ha);
1076                 if (rc)
1077                         return rc;
1078
1079                 pm8001_ha->use_msix = true;
1080
1081                 return 0;
1082         }
1083
1084 use_intx:
1085         /* Initialize the INT-X interrupt */
1086         pm8001_dbg(pm8001_ha, INIT, "MSIX not supported!!!\n");
1087         pm8001_ha->use_msix = false;
1088         pm8001_ha->irq_vector[0].irq_id = 0;
1089         pm8001_ha->irq_vector[0].drv_inst = pm8001_ha;
1090
1091         return request_irq(pdev->irq, pm8001_interrupt_handler_intx,
1092                            IRQF_SHARED, pm8001_ha->name,
1093                            SHOST_TO_SAS_HA(pm8001_ha->shost));
1094 }
1095
1096 static void pm8001_free_irq(struct pm8001_hba_info *pm8001_ha)
1097 {
1098         struct pci_dev *pdev = pm8001_ha->pdev;
1099         int i;
1100
1101         if (pm8001_ha->use_msix) {
1102                 for (i = 0; i < pm8001_ha->number_of_intr; i++)
1103                         synchronize_irq(pci_irq_vector(pdev, i));
1104
1105                 for (i = 0; i < pm8001_ha->number_of_intr; i++)
1106                         free_irq(pci_irq_vector(pdev, i), &pm8001_ha->irq_vector[i]);
1107
1108                 pci_free_irq_vectors(pdev);
1109                 return;
1110         }
1111
1112         /* INT-X */
1113         free_irq(pm8001_ha->irq, pm8001_ha->sas);
1114 }
1115
1116 /**
1117  * pm8001_pci_probe - probe supported device
1118  * @pdev: pci device which kernel has been prepared for.
1119  * @ent: pci device id
1120  *
1121  * This function is the main initialization function, when register a new
1122  * pci driver it is invoked, all struct and hardware initialization should be
1123  * done here, also, register interrupt.
1124  */
1125 static int pm8001_pci_probe(struct pci_dev *pdev,
1126                             const struct pci_device_id *ent)
1127 {
1128         unsigned int rc;
1129         u32     pci_reg;
1130         u8      i = 0;
1131         struct pm8001_hba_info *pm8001_ha;
1132         struct Scsi_Host *shost = NULL;
1133         const struct pm8001_chip_info *chip;
1134         struct sas_ha_struct *sha;
1135
1136         dev_printk(KERN_INFO, &pdev->dev,
1137                 "pm80xx: driver version %s\n", DRV_VERSION);
1138         rc = pci_enable_device(pdev);
1139         if (rc)
1140                 goto err_out_enable;
1141         pci_set_master(pdev);
1142         /*
1143          * Enable pci slot busmaster by setting pci command register.
1144          * This is required by FW for Cyclone card.
1145          */
1146
1147         pci_read_config_dword(pdev, PCI_COMMAND, &pci_reg);
1148         pci_reg |= 0x157;
1149         pci_write_config_dword(pdev, PCI_COMMAND, pci_reg);
1150         rc = pci_request_regions(pdev, DRV_NAME);
1151         if (rc)
1152                 goto err_out_disable;
1153         rc = pci_go_44(pdev);
1154         if (rc)
1155                 goto err_out_regions;
1156
1157         shost = scsi_host_alloc(&pm8001_sht, sizeof(void *));
1158         if (!shost) {
1159                 rc = -ENOMEM;
1160                 goto err_out_regions;
1161         }
1162         chip = &pm8001_chips[ent->driver_data];
1163         sha = kzalloc(sizeof(struct sas_ha_struct), GFP_KERNEL);
1164         if (!sha) {
1165                 rc = -ENOMEM;
1166                 goto err_out_free_host;
1167         }
1168         SHOST_TO_SAS_HA(shost) = sha;
1169
1170         rc = pm8001_prep_sas_ha_init(shost, chip);
1171         if (rc) {
1172                 rc = -ENOMEM;
1173                 goto err_out_free;
1174         }
1175         pci_set_drvdata(pdev, SHOST_TO_SAS_HA(shost));
1176         /* ent->driver variable is used to differentiate between controllers */
1177         pm8001_ha = pm8001_pci_alloc(pdev, ent, shost);
1178         if (!pm8001_ha) {
1179                 rc = -ENOMEM;
1180                 goto err_out_free;
1181         }
1182
1183         PM8001_CHIP_DISP->chip_soft_rst(pm8001_ha);
1184         rc = PM8001_CHIP_DISP->chip_init(pm8001_ha);
1185         if (rc) {
1186                 pm8001_dbg(pm8001_ha, FAIL,
1187                            "chip_init failed [ret: %d]\n", rc);
1188                 goto err_out_ha_free;
1189         }
1190
1191         rc = pm8001_init_ccb_tag(pm8001_ha);
1192         if (rc)
1193                 goto err_out_enable;
1194
1195
1196         PM8001_CHIP_DISP->chip_post_init(pm8001_ha);
1197
1198         if (pm8001_ha->number_of_intr > 1) {
1199                 shost->nr_hw_queues = pm8001_ha->number_of_intr - 1;
1200                 /*
1201                  * For now, ensure we're not sent too many commands by setting
1202                  * host_tagset. This is also required if we start using request
1203                  * tag.
1204                  */
1205                 shost->host_tagset = 1;
1206         }
1207
1208         rc = scsi_add_host(shost, &pdev->dev);
1209         if (rc)
1210                 goto err_out_ha_free;
1211
1212         PM8001_CHIP_DISP->interrupt_enable(pm8001_ha, 0);
1213         if (pm8001_ha->chip_id != chip_8001) {
1214                 for (i = 1; i < pm8001_ha->number_of_intr; i++)
1215                         PM8001_CHIP_DISP->interrupt_enable(pm8001_ha, i);
1216                 /* setup thermal configuration. */
1217                 pm80xx_set_thermal_config(pm8001_ha);
1218         }
1219
1220         rc = pm8001_init_sas_add(pm8001_ha);
1221         if (rc)
1222                 goto err_out_shost;
1223         /* phy setting support for motherboard controller */
1224         rc = pm8001_configure_phy_settings(pm8001_ha);
1225         if (rc)
1226                 goto err_out_shost;
1227
1228         pm8001_post_sas_ha_init(shost, chip);
1229         rc = sas_register_ha(SHOST_TO_SAS_HA(shost));
1230         if (rc) {
1231                 pm8001_dbg(pm8001_ha, FAIL,
1232                            "sas_register_ha failed [ret: %d]\n", rc);
1233                 goto err_out_shost;
1234         }
1235         list_add_tail(&pm8001_ha->list, &hba_list);
1236         pm8001_ha->flags = PM8001F_RUN_TIME;
1237         scsi_scan_host(pm8001_ha->shost);
1238         return 0;
1239
1240 err_out_shost:
1241         scsi_remove_host(pm8001_ha->shost);
1242 err_out_ha_free:
1243         pm8001_free(pm8001_ha);
1244 err_out_free:
1245         kfree(sha);
1246 err_out_free_host:
1247         scsi_host_put(shost);
1248 err_out_regions:
1249         pci_release_regions(pdev);
1250 err_out_disable:
1251         pci_disable_device(pdev);
1252 err_out_enable:
1253         return rc;
1254 }
1255
1256 /**
1257  * pm8001_init_ccb_tag - allocate memory to CCB and tag.
1258  * @pm8001_ha: our hba card information.
1259  */
1260 static int pm8001_init_ccb_tag(struct pm8001_hba_info *pm8001_ha)
1261 {
1262         struct Scsi_Host *shost = pm8001_ha->shost;
1263         struct device *dev = pm8001_ha->dev;
1264         u32 max_out_io, ccb_count;
1265         int i;
1266
1267         max_out_io = pm8001_ha->main_cfg_tbl.pm80xx_tbl.max_out_io;
1268         ccb_count = min_t(int, PM8001_MAX_CCB, max_out_io);
1269
1270         shost->can_queue = ccb_count - PM8001_RESERVE_SLOT;
1271
1272         pm8001_ha->rsvd_tags = bitmap_zalloc(PM8001_RESERVE_SLOT, GFP_KERNEL);
1273         if (!pm8001_ha->rsvd_tags)
1274                 goto err_out;
1275
1276         /* Memory region for ccb_info*/
1277         pm8001_ha->ccb_count = ccb_count;
1278         pm8001_ha->ccb_info =
1279                 kcalloc(ccb_count, sizeof(struct pm8001_ccb_info), GFP_KERNEL);
1280         if (!pm8001_ha->ccb_info) {
1281                 pm8001_dbg(pm8001_ha, FAIL,
1282                            "Unable to allocate memory for ccb\n");
1283                 goto err_out_noccb;
1284         }
1285         for (i = 0; i < ccb_count; i++) {
1286                 pm8001_ha->ccb_info[i].buf_prd = dma_alloc_coherent(dev,
1287                                 sizeof(struct pm8001_prd) * PM8001_MAX_DMA_SG,
1288                                 &pm8001_ha->ccb_info[i].ccb_dma_handle,
1289                                 GFP_KERNEL);
1290                 if (!pm8001_ha->ccb_info[i].buf_prd) {
1291                         pm8001_dbg(pm8001_ha, FAIL,
1292                                    "ccb prd memory allocation error\n");
1293                         goto err_out;
1294                 }
1295                 pm8001_ha->ccb_info[i].task = NULL;
1296                 pm8001_ha->ccb_info[i].ccb_tag = PM8001_INVALID_TAG;
1297                 pm8001_ha->ccb_info[i].device = NULL;
1298         }
1299
1300         return 0;
1301
1302 err_out_noccb:
1303         kfree(pm8001_ha->devices);
1304 err_out:
1305         return -ENOMEM;
1306 }
1307
1308 static void pm8001_pci_remove(struct pci_dev *pdev)
1309 {
1310         struct sas_ha_struct *sha = pci_get_drvdata(pdev);
1311         struct pm8001_hba_info *pm8001_ha = sha->lldd_ha;
1312         int i;
1313
1314         sas_unregister_ha(sha);
1315         sas_remove_host(pm8001_ha->shost);
1316         list_del(&pm8001_ha->list);
1317         PM8001_CHIP_DISP->interrupt_disable(pm8001_ha, 0xFF);
1318         PM8001_CHIP_DISP->chip_soft_rst(pm8001_ha);
1319
1320         pm8001_free_irq(pm8001_ha);
1321         pm8001_kill_tasklet(pm8001_ha);
1322         scsi_host_put(pm8001_ha->shost);
1323
1324         for (i = 0; i < pm8001_ha->ccb_count; i++) {
1325                 dma_free_coherent(&pm8001_ha->pdev->dev,
1326                         sizeof(struct pm8001_prd) * PM8001_MAX_DMA_SG,
1327                         pm8001_ha->ccb_info[i].buf_prd,
1328                         pm8001_ha->ccb_info[i].ccb_dma_handle);
1329         }
1330         kfree(pm8001_ha->ccb_info);
1331         kfree(pm8001_ha->devices);
1332
1333         pm8001_free(pm8001_ha);
1334         kfree(sha->sas_phy);
1335         kfree(sha->sas_port);
1336         kfree(sha);
1337         pci_release_regions(pdev);
1338         pci_disable_device(pdev);
1339 }
1340
1341 /**
1342  * pm8001_pci_suspend - power management suspend main entry point
1343  * @dev: Device struct
1344  *
1345  * Return: 0 on success, anything else on error.
1346  */
1347 static int __maybe_unused pm8001_pci_suspend(struct device *dev)
1348 {
1349         struct pci_dev *pdev = to_pci_dev(dev);
1350         struct sas_ha_struct *sha = pci_get_drvdata(pdev);
1351         struct pm8001_hba_info *pm8001_ha = sha->lldd_ha;
1352
1353         sas_suspend_ha(sha);
1354         flush_workqueue(pm8001_wq);
1355         scsi_block_requests(pm8001_ha->shost);
1356         if (!pdev->pm_cap) {
1357                 dev_err(dev, " PCI PM not supported\n");
1358                 return -ENODEV;
1359         }
1360         PM8001_CHIP_DISP->interrupt_disable(pm8001_ha, 0xFF);
1361         PM8001_CHIP_DISP->chip_soft_rst(pm8001_ha);
1362
1363         pm8001_free_irq(pm8001_ha);
1364         pm8001_kill_tasklet(pm8001_ha);
1365
1366         pm8001_info(pm8001_ha, "pdev=0x%p, slot=%s, entering "
1367                       "suspended state\n", pdev,
1368                       pm8001_ha->name);
1369         return 0;
1370 }
1371
1372 /**
1373  * pm8001_pci_resume - power management resume main entry point
1374  * @dev: Device struct
1375  *
1376  * Return: 0 on success, anything else on error.
1377  */
1378 static int __maybe_unused pm8001_pci_resume(struct device *dev)
1379 {
1380         struct pci_dev *pdev = to_pci_dev(dev);
1381         struct sas_ha_struct *sha = pci_get_drvdata(pdev);
1382         struct pm8001_hba_info *pm8001_ha;
1383         int rc;
1384         u8 i = 0;
1385         DECLARE_COMPLETION_ONSTACK(completion);
1386
1387         pm8001_ha = sha->lldd_ha;
1388
1389         pm8001_info(pm8001_ha,
1390                     "pdev=0x%p, slot=%s, resuming from previous operating state [D%d]\n",
1391                     pdev, pm8001_ha->name, pdev->current_state);
1392
1393         rc = pci_go_44(pdev);
1394         if (rc)
1395                 goto err_out_disable;
1396         sas_prep_resume_ha(sha);
1397         /* chip soft rst only for spc */
1398         if (pm8001_ha->chip_id == chip_8001) {
1399                 PM8001_CHIP_DISP->chip_soft_rst(pm8001_ha);
1400                 pm8001_dbg(pm8001_ha, INIT, "chip soft reset successful\n");
1401         }
1402         rc = PM8001_CHIP_DISP->chip_init(pm8001_ha);
1403         if (rc)
1404                 goto err_out_disable;
1405
1406         /* disable all the interrupt bits */
1407         PM8001_CHIP_DISP->interrupt_disable(pm8001_ha, 0xFF);
1408
1409         rc = pm8001_request_irq(pm8001_ha);
1410         if (rc)
1411                 goto err_out_disable;
1412
1413         pm8001_init_tasklet(pm8001_ha);
1414
1415         PM8001_CHIP_DISP->interrupt_enable(pm8001_ha, 0);
1416         if (pm8001_ha->chip_id != chip_8001) {
1417                 for (i = 1; i < pm8001_ha->number_of_intr; i++)
1418                         PM8001_CHIP_DISP->interrupt_enable(pm8001_ha, i);
1419         }
1420
1421         /* Chip documentation for the 8070 and 8072 SPCv    */
1422         /* states that a 500ms minimum delay is required    */
1423         /* before issuing commands. Otherwise, the firmware */
1424         /* will enter an unrecoverable state.               */
1425
1426         if (pm8001_ha->chip_id == chip_8070 ||
1427                 pm8001_ha->chip_id == chip_8072) {
1428                 mdelay(500);
1429         }
1430
1431         /* Spin up the PHYs */
1432
1433         pm8001_ha->flags = PM8001F_RUN_TIME;
1434         for (i = 0; i < pm8001_ha->chip->n_phy; i++) {
1435                 pm8001_ha->phy[i].enable_completion = &completion;
1436                 PM8001_CHIP_DISP->phy_start_req(pm8001_ha, i);
1437                 wait_for_completion(&completion);
1438         }
1439         sas_resume_ha(sha);
1440         return 0;
1441
1442 err_out_disable:
1443         scsi_remove_host(pm8001_ha->shost);
1444
1445         return rc;
1446 }
1447
1448 /* update of pci device, vendor id and driver data with
1449  * unique value for each of the controller
1450  */
1451 static struct pci_device_id pm8001_pci_table[] = {
1452         { PCI_VDEVICE(PMC_Sierra, 0x8001), chip_8001 },
1453         { PCI_VDEVICE(PMC_Sierra, 0x8006), chip_8006 },
1454         { PCI_VDEVICE(ADAPTEC2, 0x8006), chip_8006 },
1455         { PCI_VDEVICE(ATTO, 0x0042), chip_8001 },
1456         /* Support for SPC/SPCv/SPCve controllers */
1457         { PCI_VDEVICE(ADAPTEC2, 0x8001), chip_8001 },
1458         { PCI_VDEVICE(PMC_Sierra, 0x8008), chip_8008 },
1459         { PCI_VDEVICE(ADAPTEC2, 0x8008), chip_8008 },
1460         { PCI_VDEVICE(PMC_Sierra, 0x8018), chip_8018 },
1461         { PCI_VDEVICE(ADAPTEC2, 0x8018), chip_8018 },
1462         { PCI_VDEVICE(PMC_Sierra, 0x8009), chip_8009 },
1463         { PCI_VDEVICE(ADAPTEC2, 0x8009), chip_8009 },
1464         { PCI_VDEVICE(PMC_Sierra, 0x8019), chip_8019 },
1465         { PCI_VDEVICE(ADAPTEC2, 0x8019), chip_8019 },
1466         { PCI_VDEVICE(PMC_Sierra, 0x8074), chip_8074 },
1467         { PCI_VDEVICE(ADAPTEC2, 0x8074), chip_8074 },
1468         { PCI_VDEVICE(PMC_Sierra, 0x8076), chip_8076 },
1469         { PCI_VDEVICE(ADAPTEC2, 0x8076), chip_8076 },
1470         { PCI_VDEVICE(PMC_Sierra, 0x8077), chip_8077 },
1471         { PCI_VDEVICE(ADAPTEC2, 0x8077), chip_8077 },
1472         { PCI_VENDOR_ID_ADAPTEC2, 0x8081,
1473                 PCI_VENDOR_ID_ADAPTEC2, 0x0400, 0, 0, chip_8001 },
1474         { PCI_VENDOR_ID_ADAPTEC2, 0x8081,
1475                 PCI_VENDOR_ID_ADAPTEC2, 0x0800, 0, 0, chip_8001 },
1476         { PCI_VENDOR_ID_ADAPTEC2, 0x8088,
1477                 PCI_VENDOR_ID_ADAPTEC2, 0x0008, 0, 0, chip_8008 },
1478         { PCI_VENDOR_ID_ADAPTEC2, 0x8088,
1479                 PCI_VENDOR_ID_ADAPTEC2, 0x0800, 0, 0, chip_8008 },
1480         { PCI_VENDOR_ID_ADAPTEC2, 0x8089,
1481                 PCI_VENDOR_ID_ADAPTEC2, 0x0008, 0, 0, chip_8009 },
1482         { PCI_VENDOR_ID_ADAPTEC2, 0x8089,
1483                 PCI_VENDOR_ID_ADAPTEC2, 0x0800, 0, 0, chip_8009 },
1484         { PCI_VENDOR_ID_ADAPTEC2, 0x8088,
1485                 PCI_VENDOR_ID_ADAPTEC2, 0x0016, 0, 0, chip_8018 },
1486         { PCI_VENDOR_ID_ADAPTEC2, 0x8088,
1487                 PCI_VENDOR_ID_ADAPTEC2, 0x1600, 0, 0, chip_8018 },
1488         { PCI_VENDOR_ID_ADAPTEC2, 0x8089,
1489                 PCI_VENDOR_ID_ADAPTEC2, 0x0016, 0, 0, chip_8019 },
1490         { PCI_VENDOR_ID_ADAPTEC2, 0x8089,
1491                 PCI_VENDOR_ID_ADAPTEC2, 0x1600, 0, 0, chip_8019 },
1492         { PCI_VENDOR_ID_ADAPTEC2, 0x8074,
1493                 PCI_VENDOR_ID_ADAPTEC2, 0x0800, 0, 0, chip_8074 },
1494         { PCI_VENDOR_ID_ADAPTEC2, 0x8076,
1495                 PCI_VENDOR_ID_ADAPTEC2, 0x1600, 0, 0, chip_8076 },
1496         { PCI_VENDOR_ID_ADAPTEC2, 0x8077,
1497                 PCI_VENDOR_ID_ADAPTEC2, 0x1600, 0, 0, chip_8077 },
1498         { PCI_VENDOR_ID_ADAPTEC2, 0x8074,
1499                 PCI_VENDOR_ID_ADAPTEC2, 0x0008, 0, 0, chip_8074 },
1500         { PCI_VENDOR_ID_ADAPTEC2, 0x8076,
1501                 PCI_VENDOR_ID_ADAPTEC2, 0x0016, 0, 0, chip_8076 },
1502         { PCI_VENDOR_ID_ADAPTEC2, 0x8077,
1503                 PCI_VENDOR_ID_ADAPTEC2, 0x0016, 0, 0, chip_8077 },
1504         { PCI_VENDOR_ID_ADAPTEC2, 0x8076,
1505                 PCI_VENDOR_ID_ADAPTEC2, 0x0808, 0, 0, chip_8076 },
1506         { PCI_VENDOR_ID_ADAPTEC2, 0x8077,
1507                 PCI_VENDOR_ID_ADAPTEC2, 0x0808, 0, 0, chip_8077 },
1508         { PCI_VENDOR_ID_ADAPTEC2, 0x8074,
1509                 PCI_VENDOR_ID_ADAPTEC2, 0x0404, 0, 0, chip_8074 },
1510         { PCI_VENDOR_ID_ATTO, 0x8070,
1511                 PCI_VENDOR_ID_ATTO, 0x0070, 0, 0, chip_8070 },
1512         { PCI_VENDOR_ID_ATTO, 0x8070,
1513                 PCI_VENDOR_ID_ATTO, 0x0071, 0, 0, chip_8070 },
1514         { PCI_VENDOR_ID_ATTO, 0x8072,
1515                 PCI_VENDOR_ID_ATTO, 0x0072, 0, 0, chip_8072 },
1516         { PCI_VENDOR_ID_ATTO, 0x8072,
1517                 PCI_VENDOR_ID_ATTO, 0x0073, 0, 0, chip_8072 },
1518         { PCI_VENDOR_ID_ATTO, 0x8070,
1519                 PCI_VENDOR_ID_ATTO, 0x0080, 0, 0, chip_8070 },
1520         { PCI_VENDOR_ID_ATTO, 0x8072,
1521                 PCI_VENDOR_ID_ATTO, 0x0081, 0, 0, chip_8072 },
1522         { PCI_VENDOR_ID_ATTO, 0x8072,
1523                 PCI_VENDOR_ID_ATTO, 0x0082, 0, 0, chip_8072 },
1524         {} /* terminate list */
1525 };
1526
1527 static SIMPLE_DEV_PM_OPS(pm8001_pci_pm_ops,
1528                          pm8001_pci_suspend,
1529                          pm8001_pci_resume);
1530
1531 static struct pci_driver pm8001_pci_driver = {
1532         .name           = DRV_NAME,
1533         .id_table       = pm8001_pci_table,
1534         .probe          = pm8001_pci_probe,
1535         .remove         = pm8001_pci_remove,
1536         .driver.pm      = &pm8001_pci_pm_ops,
1537 };
1538
1539 /**
1540  *      pm8001_init - initialize scsi transport template
1541  */
1542 static int __init pm8001_init(void)
1543 {
1544         int rc = -ENOMEM;
1545
1546         if (pm8001_use_tasklet && !pm8001_use_msix)
1547                 pm8001_use_tasklet = false;
1548
1549         pm8001_wq = alloc_workqueue("pm80xx", 0, 0);
1550         if (!pm8001_wq)
1551                 goto err;
1552
1553         pm8001_id = 0;
1554         pm8001_stt = sas_domain_attach_transport(&pm8001_transport_ops);
1555         if (!pm8001_stt)
1556                 goto err_wq;
1557         rc = pci_register_driver(&pm8001_pci_driver);
1558         if (rc)
1559                 goto err_tp;
1560         return 0;
1561
1562 err_tp:
1563         sas_release_transport(pm8001_stt);
1564 err_wq:
1565         destroy_workqueue(pm8001_wq);
1566 err:
1567         return rc;
1568 }
1569
1570 static void __exit pm8001_exit(void)
1571 {
1572         pci_unregister_driver(&pm8001_pci_driver);
1573         sas_release_transport(pm8001_stt);
1574         destroy_workqueue(pm8001_wq);
1575 }
1576
1577 module_init(pm8001_init);
1578 module_exit(pm8001_exit);
1579
1580 MODULE_AUTHOR("Jack Wang <[email protected]>");
1581 MODULE_AUTHOR("Anand Kumar Santhanam <[email protected]>");
1582 MODULE_AUTHOR("Sangeetha Gnanasekaran <[email protected]>");
1583 MODULE_AUTHOR("Nikith Ganigarakoppal <[email protected]>");
1584 MODULE_DESCRIPTION(
1585                 "PMC-Sierra PM8001/8006/8081/8088/8089/8074/8076/8077/8070/8072 "
1586                 "SAS/SATA controller driver");
1587 MODULE_VERSION(DRV_VERSION);
1588 MODULE_LICENSE("GPL");
1589 MODULE_DEVICE_TABLE(pci, pm8001_pci_table);
1590