1 // SPDX-License-Identifier: GPL-2.0+
6 #include <linux/kernel.h>
7 #include <linux/module.h>
9 #include <linux/property.h>
10 #include <linux/slab.h>
12 #include <drm/drm_atomic_state_helper.h>
13 #include <drm/drm_bridge.h>
14 #include <drm/drm_bridge_connector.h>
15 #include <drm/drm_connector.h>
16 #include <drm/drm_device.h>
17 #include <drm/drm_edid.h>
18 #include <drm/drm_modeset_helper_vtables.h>
19 #include <drm/drm_probe_helper.h>
24 * The DRM bridge connector helper object provides a DRM connector
25 * implementation that wraps a chain of &struct drm_bridge. The connector
26 * operations are fully implemented based on the operations of the bridges in
27 * the chain, and don't require any intervention from the display controller
30 * To use the helper, display controller drivers create a bridge connector with
31 * a call to drm_bridge_connector_init(). This associates the newly created
32 * connector with the chain of bridges passed to the function and registers it
33 * with the DRM device. At that point the connector becomes fully usable, no
34 * further operation is needed.
36 * The DRM bridge connector operations are implemented based on the operations
37 * provided by the bridges in the chain. Each connector operation is delegated
38 * to the bridge closest to the connector (at the end of the chain) that
39 * provides the relevant functionality.
41 * To make use of this helper, all bridges in the chain shall report bridge
42 * operation flags (&drm_bridge->ops) and bridge output type
43 * (&drm_bridge->type), as well as the DRM_BRIDGE_ATTACH_NO_CONNECTOR attach
44 * flag (none of the bridges shall create a DRM connector directly).
48 * struct drm_bridge_connector - A connector backed by a chain of bridges
50 struct drm_bridge_connector {
52 * @base: The base DRM connector
54 struct drm_connector base;
58 * The encoder at the start of the bridges chain.
60 struct drm_encoder *encoder;
64 * The last bridge in the chain (closest to the connector) that provides
65 * EDID read support, if any (see &DRM_BRIDGE_OP_EDID).
67 struct drm_bridge *bridge_edid;
71 * The last bridge in the chain (closest to the connector) that provides
72 * hot-plug detection notification, if any (see &DRM_BRIDGE_OP_HPD).
74 struct drm_bridge *bridge_hpd;
78 * The last bridge in the chain (closest to the connector) that provides
79 * connector detection, if any (see &DRM_BRIDGE_OP_DETECT).
81 struct drm_bridge *bridge_detect;
85 * The last bridge in the chain (closest to the connector) that provides
86 * connector modes detection, if any (see &DRM_BRIDGE_OP_MODES).
88 struct drm_bridge *bridge_modes;
91 #define to_drm_bridge_connector(x) \
92 container_of(x, struct drm_bridge_connector, base)
94 /* -----------------------------------------------------------------------------
95 * Bridge Connector Hot-Plug Handling
98 static void drm_bridge_connector_hpd_notify(struct drm_connector *connector,
99 enum drm_connector_status status)
101 struct drm_bridge_connector *bridge_connector =
102 to_drm_bridge_connector(connector);
103 struct drm_bridge *bridge;
105 /* Notify all bridges in the pipeline of hotplug events. */
106 drm_for_each_bridge_in_chain(bridge_connector->encoder, bridge) {
107 if (bridge->funcs->hpd_notify)
108 bridge->funcs->hpd_notify(bridge, status);
112 static void drm_bridge_connector_handle_hpd(struct drm_bridge_connector *drm_bridge_connector,
113 enum drm_connector_status status)
115 struct drm_connector *connector = &drm_bridge_connector->base;
116 struct drm_device *dev = connector->dev;
118 mutex_lock(&dev->mode_config.mutex);
119 connector->status = status;
120 mutex_unlock(&dev->mode_config.mutex);
122 drm_bridge_connector_hpd_notify(connector, status);
124 drm_kms_helper_connector_hotplug_event(connector);
127 static void drm_bridge_connector_hpd_cb(void *cb_data,
128 enum drm_connector_status status)
130 drm_bridge_connector_handle_hpd(cb_data, status);
133 static void drm_bridge_connector_oob_hotplug_event(struct drm_connector *connector,
134 enum drm_connector_status status)
136 struct drm_bridge_connector *bridge_connector =
137 to_drm_bridge_connector(connector);
139 drm_bridge_connector_handle_hpd(bridge_connector, status);
142 static void drm_bridge_connector_enable_hpd(struct drm_connector *connector)
144 struct drm_bridge_connector *bridge_connector =
145 to_drm_bridge_connector(connector);
146 struct drm_bridge *hpd = bridge_connector->bridge_hpd;
149 drm_bridge_hpd_enable(hpd, drm_bridge_connector_hpd_cb,
153 static void drm_bridge_connector_disable_hpd(struct drm_connector *connector)
155 struct drm_bridge_connector *bridge_connector =
156 to_drm_bridge_connector(connector);
157 struct drm_bridge *hpd = bridge_connector->bridge_hpd;
160 drm_bridge_hpd_disable(hpd);
163 /* -----------------------------------------------------------------------------
164 * Bridge Connector Functions
167 static enum drm_connector_status
168 drm_bridge_connector_detect(struct drm_connector *connector, bool force)
170 struct drm_bridge_connector *bridge_connector =
171 to_drm_bridge_connector(connector);
172 struct drm_bridge *detect = bridge_connector->bridge_detect;
173 enum drm_connector_status status;
176 status = detect->funcs->detect(detect);
178 drm_bridge_connector_hpd_notify(connector, status);
180 switch (connector->connector_type) {
181 case DRM_MODE_CONNECTOR_DPI:
182 case DRM_MODE_CONNECTOR_LVDS:
183 case DRM_MODE_CONNECTOR_DSI:
184 case DRM_MODE_CONNECTOR_eDP:
185 status = connector_status_connected;
188 status = connector_status_unknown;
196 static void drm_bridge_connector_destroy(struct drm_connector *connector)
198 struct drm_bridge_connector *bridge_connector =
199 to_drm_bridge_connector(connector);
201 if (bridge_connector->bridge_hpd) {
202 struct drm_bridge *hpd = bridge_connector->bridge_hpd;
204 drm_bridge_hpd_disable(hpd);
207 drm_connector_unregister(connector);
208 drm_connector_cleanup(connector);
210 fwnode_handle_put(connector->fwnode);
212 kfree(bridge_connector);
215 static void drm_bridge_connector_debugfs_init(struct drm_connector *connector,
218 struct drm_bridge_connector *bridge_connector =
219 to_drm_bridge_connector(connector);
220 struct drm_encoder *encoder = bridge_connector->encoder;
221 struct drm_bridge *bridge;
223 list_for_each_entry(bridge, &encoder->bridge_chain, chain_node) {
224 if (bridge->funcs->debugfs_init)
225 bridge->funcs->debugfs_init(bridge, root);
229 static const struct drm_connector_funcs drm_bridge_connector_funcs = {
230 .reset = drm_atomic_helper_connector_reset,
231 .detect = drm_bridge_connector_detect,
232 .fill_modes = drm_helper_probe_single_connector_modes,
233 .destroy = drm_bridge_connector_destroy,
234 .atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state,
235 .atomic_destroy_state = drm_atomic_helper_connector_destroy_state,
236 .debugfs_init = drm_bridge_connector_debugfs_init,
237 .oob_hotplug_event = drm_bridge_connector_oob_hotplug_event,
240 /* -----------------------------------------------------------------------------
241 * Bridge Connector Helper Functions
244 static int drm_bridge_connector_get_modes_edid(struct drm_connector *connector,
245 struct drm_bridge *bridge)
247 enum drm_connector_status status;
251 status = drm_bridge_connector_detect(connector, false);
252 if (status != connector_status_connected)
255 edid = drm_bridge_get_edid(bridge, connector);
256 if (!drm_edid_is_valid(edid)) {
261 drm_connector_update_edid_property(connector, edid);
262 n = drm_add_edid_modes(connector, edid);
268 drm_connector_update_edid_property(connector, NULL);
272 static int drm_bridge_connector_get_modes(struct drm_connector *connector)
274 struct drm_bridge_connector *bridge_connector =
275 to_drm_bridge_connector(connector);
276 struct drm_bridge *bridge;
279 * If display exposes EDID, then we parse that in the normal way to
280 * build table of supported modes.
282 bridge = bridge_connector->bridge_edid;
284 return drm_bridge_connector_get_modes_edid(connector, bridge);
287 * Otherwise if the display pipeline reports modes (e.g. with a fixed
288 * resolution panel or an analog TV output), query it.
290 bridge = bridge_connector->bridge_modes;
292 return bridge->funcs->get_modes(bridge, connector);
295 * We can't retrieve modes, which can happen for instance for a DVI or
296 * VGA output with the DDC bus unconnected. The KMS core will add the
302 static const struct drm_connector_helper_funcs drm_bridge_connector_helper_funcs = {
303 .get_modes = drm_bridge_connector_get_modes,
304 /* No need for .mode_valid(), the bridges are checked by the core. */
305 .enable_hpd = drm_bridge_connector_enable_hpd,
306 .disable_hpd = drm_bridge_connector_disable_hpd,
309 /* -----------------------------------------------------------------------------
310 * Bridge Connector Initialisation
314 * drm_bridge_connector_init - Initialise a connector for a chain of bridges
315 * @drm: the DRM device
316 * @encoder: the encoder where the bridge chain starts
318 * Allocate, initialise and register a &drm_bridge_connector with the @drm
319 * device. The connector is associated with a chain of bridges that starts at
320 * the @encoder. All bridges in the chain shall report bridge operation flags
321 * (&drm_bridge->ops) and bridge output type (&drm_bridge->type), and none of
322 * them may create a DRM connector directly.
324 * Returns a pointer to the new connector on success, or a negative error
327 struct drm_connector *drm_bridge_connector_init(struct drm_device *drm,
328 struct drm_encoder *encoder)
330 struct drm_bridge_connector *bridge_connector;
331 struct drm_connector *connector;
332 struct i2c_adapter *ddc = NULL;
333 struct drm_bridge *bridge, *panel_bridge = NULL;
337 bridge_connector = kzalloc(sizeof(*bridge_connector), GFP_KERNEL);
338 if (!bridge_connector)
339 return ERR_PTR(-ENOMEM);
341 bridge_connector->encoder = encoder;
344 * TODO: Handle doublescan_allowed, stereo_allowed and
347 connector = &bridge_connector->base;
348 connector->interlace_allowed = true;
351 * Initialise connector status handling. First locate the furthest
352 * bridges in the pipeline that support HPD and output detection. Then
353 * initialise the connector polling mode, using HPD if available and
354 * falling back to polling if supported. If neither HPD nor output
355 * detection are available, we don't support hotplug detection at all.
357 connector_type = DRM_MODE_CONNECTOR_Unknown;
358 drm_for_each_bridge_in_chain(encoder, bridge) {
359 if (!bridge->interlace_allowed)
360 connector->interlace_allowed = false;
362 if (bridge->ops & DRM_BRIDGE_OP_EDID)
363 bridge_connector->bridge_edid = bridge;
364 if (bridge->ops & DRM_BRIDGE_OP_HPD)
365 bridge_connector->bridge_hpd = bridge;
366 if (bridge->ops & DRM_BRIDGE_OP_DETECT)
367 bridge_connector->bridge_detect = bridge;
368 if (bridge->ops & DRM_BRIDGE_OP_MODES)
369 bridge_connector->bridge_modes = bridge;
371 if (!drm_bridge_get_next_bridge(bridge))
372 connector_type = bridge->type;
375 if (!drm_bridge_get_next_bridge(bridge) &&
377 connector->fwnode = fwnode_handle_get(of_fwnode_handle(bridge->of_node));
383 if (drm_bridge_is_panel(bridge))
384 panel_bridge = bridge;
387 if (connector_type == DRM_MODE_CONNECTOR_Unknown) {
388 kfree(bridge_connector);
389 return ERR_PTR(-EINVAL);
392 ret = drm_connector_init_with_ddc(drm, connector,
393 &drm_bridge_connector_funcs,
394 connector_type, ddc);
396 kfree(bridge_connector);
400 drm_connector_helper_add(connector, &drm_bridge_connector_helper_funcs);
402 if (bridge_connector->bridge_hpd)
403 connector->polled = DRM_CONNECTOR_POLL_HPD;
404 else if (bridge_connector->bridge_detect)
405 connector->polled = DRM_CONNECTOR_POLL_CONNECT
406 | DRM_CONNECTOR_POLL_DISCONNECT;
409 drm_panel_bridge_set_orientation(connector, panel_bridge);
413 EXPORT_SYMBOL_GPL(drm_bridge_connector_init);