drivers/staging/slicoss/slicoss.c

   1 /**************************************************************************
   2  *
   3  * Copyright  2000-2006 Alacritech, Inc.  All rights reserved.
   4  *
   5  * Redistribution and use in source and binary forms, with or without
   6  * modification, are permitted provided that the following conditions
   7  * are met:
   8  *
   9  * 1. Redistributions of source code must retain the above copyright
  10  *    notice, this list of conditions and the following disclaimer.
  11  * 2. Redistributions in binary form must reproduce the above
  12  *    copyright notice, this list of conditions and the following
  13  *    disclaimer in the documentation and/or other materials provided
  14  *    with the distribution.
  15  *
  16  * Alternatively, this software may be distributed under the terms of the
  17  * GNU General Public License ("GPL") version 2 as published by the Free
  18  * Software Foundation.
  19  *
  20  * THIS SOFTWARE IS PROVIDED BY ALACRITECH, INC. ``AS IS'' AND ANY
  21  * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
  22  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
  23  * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL ALACRITECH, INC. OR
  24  * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
  25  * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
  26  * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
  27  * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
  28  * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
  29  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
  30  * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
  31  * SUCH DAMAGE.
  32  *
  33  * The views and conclusions contained in the software and documentation
  34  * are those of the authors and should not be interpreted as representing
  35  * official policies, either expressed or implied, of Alacritech, Inc.
  36  *
  37  **************************************************************************/
  38
  39 /*
  40  * FILENAME: slicoss.c
  41  *
  42  * The SLICOSS driver for Alacritech's IS-NIC products.
  43  *
  44  * This driver is supposed to support:
  45  *
  46  *      Mojave cards (single port PCI Gigabit) both copper and fiber
  47  *      Oasis cards (single and dual port PCI-x Gigabit) copper and fiber
  48  *      Kalahari cards (dual and quad port PCI-e Gigabit) copper and fiber
  49  *
  50  * The driver was actually tested on Oasis and Kalahari cards.
  51  *
  52  *
  53  * NOTE: This is the standard, non-accelerated version of Alacritech's
  54  *       IS-NIC driver.
  55  */
  56
  57
  58 #define KLUDGE_FOR_4GB_BOUNDARY         1
  59 #define DEBUG_MICROCODE                 1
  60 #define DBG                             1
  61 #define SLIC_INTERRUPT_PROCESS_LIMIT    1
  62 #define SLIC_OFFLOAD_IP_CHECKSUM                1
  63 #define STATS_TIMER_INTERVAL                    2
  64 #define PING_TIMER_INTERVAL                         1
  65 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
  66
  67 #include <linux/kernel.h>
  68 #include <linux/string.h>
  69 #include <linux/errno.h>
  70 #include <linux/ioport.h>
  71 #include <linux/slab.h>
  72 #include <linux/interrupt.h>
  73 #include <linux/timer.h>
  74 #include <linux/pci.h>
  75 #include <linux/spinlock.h>
  76 #include <linux/init.h>
  77 #include <linux/bitops.h>
  78 #include <linux/io.h>
  79 #include <linux/netdevice.h>
  80 #include <linux/crc32.h>
  81 #include <linux/etherdevice.h>
  82 #include <linux/skbuff.h>
  83 #include <linux/delay.h>
  84 #include <linux/seq_file.h>
  85 #include <linux/kthread.h>
  86 #include <linux/module.h>
  87 #include <linux/moduleparam.h>
  88
  89 #include <linux/firmware.h>
  90 #include <linux/types.h>
  91 #include <linux/dma-mapping.h>
  92 #include <linux/mii.h>
  93 #include <linux/if_vlan.h>
  94 #include <asm/unaligned.h>
  95
  96 #include <linux/ethtool.h>
  97 #include <linux/uaccess.h>
  98 #include "slichw.h"
  99 #include "slic.h"
 100
 101 static uint slic_first_init = 1;
 102 static char *slic_banner = "Alacritech SLIC Technology(tm) Server "
 103                 "and Storage Accelerator (Non-Accelerated)";
 104
 105 static char *slic_proc_version = "2.0.351  2006/07/14 12:26:00";
 106
 107 static struct base_driver slic_global = { {}, 0, 0, 0, 1, NULL, NULL };
 108 static int intagg_delay = 100;
 109 static u32 dynamic_intagg;
 110 static unsigned int rcv_count;
 111
 112 #define DRV_NAME          "slicoss"
 113 #define DRV_VERSION       "2.0.1"
 114 #define DRV_AUTHOR        "Alacritech, Inc. Engineering"
 115 #define DRV_DESCRIPTION   "Alacritech SLIC Techonology(tm) "\
 116                 "Non-Accelerated Driver"
 117 #define DRV_COPYRIGHT     "Copyright  2000-2006 Alacritech, Inc. "\
 118                 "All rights reserved."
 119 #define PFX                DRV_NAME " "
 120
 121 MODULE_AUTHOR(DRV_AUTHOR);
 122 MODULE_DESCRIPTION(DRV_DESCRIPTION);
 123 MODULE_LICENSE("Dual BSD/GPL");
 124
 125 module_param(dynamic_intagg, int, 0);
 126 MODULE_PARM_DESC(dynamic_intagg, "Dynamic Interrupt Aggregation Setting");
 127 module_param(intagg_delay, int, 0);
 128 MODULE_PARM_DESC(intagg_delay, "uSec Interrupt Aggregation Delay");
 129
 130 static const struct pci_device_id slic_pci_tbl[] = {
 131         { PCI_DEVICE(PCI_VENDOR_ID_ALACRITECH, SLIC_1GB_DEVICE_ID) },
 132         { PCI_DEVICE(PCI_VENDOR_ID_ALACRITECH, SLIC_2GB_DEVICE_ID) },
 133         { 0 }
 134 };
 135
 136 MODULE_DEVICE_TABLE(pci, slic_pci_tbl);
 137
 138 static inline void slic_reg32_write(void __iomem *reg, u32 value, bool flush)
 139 {
 140         writel(value, reg);
 141         if (flush)
 142                 mb();
 143 }
 144
 145 static inline void slic_reg64_write(struct adapter *adapter, void __iomem *reg,
 146                                     u32 value, void __iomem *regh, u32 paddrh,
 147                                     bool flush)
 148 {
 149         spin_lock_irqsave(&adapter->bit64reglock.lock,
 150                                 adapter->bit64reglock.flags);
 151         if (paddrh != adapter->curaddrupper) {
 152                 adapter->curaddrupper = paddrh;
 153                 writel(paddrh, regh);
 154         }
 155         writel(value, reg);
 156         if (flush)
 157                 mb();
 158         spin_unlock_irqrestore(&adapter->bit64reglock.lock,
 159                                 adapter->bit64reglock.flags);
 160 }
 161
 162 static void slic_mcast_set_bit(struct adapter *adapter, char *address)
 163 {
 164         unsigned char crcpoly;
 165
 166         /* Get the CRC polynomial for the mac address */
 167         /* we use bits 1-8 (lsb), bitwise reversed,
 168          * msb (= lsb bit 0 before bitrev) is automatically discarded */
 169         crcpoly = (ether_crc(ETH_ALEN, address)>>23);
 170
 171         /* We only have space on the SLIC for 64 entries.  Lop
 172          * off the top two bits. (2^6 = 64)
 173          */
 174         crcpoly &= 0x3F;
 175
 176         /* OR in the new bit into our 64 bit mask. */
 177         adapter->mcastmask |= (u64) 1 << crcpoly;
 178 }
 179
 180 static void slic_mcast_set_mask(struct adapter *adapter)
 181 {
 182         __iomem struct slic_regs *slic_regs = adapter->slic_regs;
 183
 184         if (adapter->macopts & (MAC_ALLMCAST | MAC_PROMISC)) {
 185                 /* Turn on all multicast addresses. We have to do this for
 186                  * promiscuous mode as well as ALLMCAST mode.  It saves the
 187                  * Microcode from having to keep state about the MAC
 188                  * configuration.
 189                  */
 190                 slic_reg32_write(&slic_regs->slic_mcastlow, 0xFFFFFFFF, FLUSH);
 191                 slic_reg32_write(&slic_regs->slic_mcasthigh, 0xFFFFFFFF,
 192                                  FLUSH);
 193         } else {
 194                 /* Commit our multicast mast to the SLIC by writing to the
 195                  * multicast address mask registers
 196                  */
 197                 slic_reg32_write(&slic_regs->slic_mcastlow,
 198                         (u32)(adapter->mcastmask & 0xFFFFFFFF), FLUSH);
 199                 slic_reg32_write(&slic_regs->slic_mcasthigh,
 200                         (u32)((adapter->mcastmask >> 32) & 0xFFFFFFFF), FLUSH);
 201         }
 202 }
 203
 204 static void slic_timer_ping(ulong dev)
 205 {
 206         struct adapter *adapter;
 207         struct sliccard *card;
 208
 209         adapter = netdev_priv((struct net_device *)dev);
 210         card = adapter->card;
 211
 212         adapter->pingtimer.expires = jiffies + (PING_TIMER_INTERVAL * HZ);
 213         add_timer(&adapter->pingtimer);
 214 }
 215
 216 static void slic_unmap_mmio_space(struct adapter *adapter)
 217 {
 218         if (adapter->slic_regs)
 219                 iounmap(adapter->slic_regs);
 220         adapter->slic_regs = NULL;
 221 }
 222
 223 /*
 224  *  slic_link_config
 225  *
 226  *  Write phy control to configure link duplex/speed
 227  *
 228  */
 229 static void slic_link_config(struct adapter *adapter,
 230                       u32 linkspeed, u32 linkduplex)
 231 {
 232         u32 __iomem *wphy;
 233         u32 speed;
 234         u32 duplex;
 235         u32 phy_config;
 236         u32 phy_advreg;
 237         u32 phy_gctlreg;
 238
 239         if (adapter->state != ADAPT_UP)
 240                 return;
 241
 242         if (linkspeed > LINK_1000MB)
 243                 linkspeed = LINK_AUTOSPEED;
 244         if (linkduplex > LINK_AUTOD)
 245                 linkduplex = LINK_AUTOD;
 246
 247         wphy = &adapter->slic_regs->slic_wphy;
 248
 249         if ((linkspeed == LINK_AUTOSPEED) || (linkspeed == LINK_1000MB)) {
 250                 if (adapter->flags & ADAPT_FLAGS_FIBERMEDIA) {
 251                         /*  We've got a fiber gigabit interface, and register
 252                          *  4 is different in fiber mode than in copper mode
 253                          */
 254
 255                         /* advertise FD only @1000 Mb */
 256                         phy_advreg = (MIICR_REG_4 | (PAR_ADV1000XFD));
 257                         /* enable PAUSE frames        */
 258                         phy_advreg |= PAR_ASYMPAUSE_FIBER;
 259                         slic_reg32_write(wphy, phy_advreg, FLUSH);
 260
 261                         if (linkspeed == LINK_AUTOSPEED) {
 262                                 /* reset phy, enable auto-neg  */
 263                                 phy_config =
 264                                     (MIICR_REG_PCR |
 265                                      (PCR_RESET | PCR_AUTONEG |
 266                                       PCR_AUTONEG_RST));
 267                                 slic_reg32_write(wphy, phy_config, FLUSH);
 268                         } else {        /* forced 1000 Mb FD*/
 269                                 /* power down phy to break link
 270                                    this may not work) */
 271                                 phy_config = (MIICR_REG_PCR | PCR_POWERDOWN);
 272                                 slic_reg32_write(wphy, phy_config, FLUSH);
 273                                 /* wait, Marvell says 1 sec,
 274                                    try to get away with 10 ms  */
 275                                 mdelay(10);
 276
 277                                 /* disable auto-neg, set speed/duplex,
 278                                    soft reset phy, powerup */
 279                                 phy_config =
 280                                     (MIICR_REG_PCR |
 281                                      (PCR_RESET | PCR_SPEED_1000 |
 282                                       PCR_DUPLEX_FULL));
 283                                 slic_reg32_write(wphy, phy_config, FLUSH);
 284                         }
 285                 } else {        /* copper gigabit */
 286
 287                         /* Auto-Negotiate or 1000 Mb must be auto negotiated
 288                          * We've got a copper gigabit interface, and
 289                          * register 4 is different in copper mode than
 290                          * in fiber mode
 291                          */
 292                         if (linkspeed == LINK_AUTOSPEED) {
 293                                 /* advertise 10/100 Mb modes   */
 294                                 phy_advreg =
 295                                     (MIICR_REG_4 |
 296                                      (PAR_ADV100FD | PAR_ADV100HD | PAR_ADV10FD
 297                                       | PAR_ADV10HD));
 298                         } else {
 299                         /* linkspeed == LINK_1000MB -
 300                            don't advertise 10/100 Mb modes  */
 301                                 phy_advreg = MIICR_REG_4;
 302                         }
 303                         /* enable PAUSE frames  */
 304                         phy_advreg |= PAR_ASYMPAUSE;
 305                         /* required by the Cicada PHY  */
 306                         phy_advreg |= PAR_802_3;
 307                         slic_reg32_write(wphy, phy_advreg, FLUSH);
 308                         /* advertise FD only @1000 Mb  */
 309                         phy_gctlreg = (MIICR_REG_9 | (PGC_ADV1000FD));
 310                         slic_reg32_write(wphy, phy_gctlreg, FLUSH);
 311
 312                         if (adapter->subsysid != SLIC_1GB_CICADA_SUBSYS_ID) {
 313                                 /* if a Marvell PHY
 314                                    enable auto crossover */
 315                                 phy_config =
 316                                     (MIICR_REG_16 | (MRV_REG16_XOVERON));
 317                                 slic_reg32_write(wphy, phy_config, FLUSH);
 318
 319                                 /* reset phy, enable auto-neg  */
 320                                 phy_config =
 321                                     (MIICR_REG_PCR |
 322                                      (PCR_RESET | PCR_AUTONEG |
 323                                       PCR_AUTONEG_RST));
 324                                 slic_reg32_write(wphy, phy_config, FLUSH);
 325                         } else {        /* it's a Cicada PHY  */
 326                                 /* enable and restart auto-neg (don't reset)  */
 327                                 phy_config =
 328                                     (MIICR_REG_PCR |
 329                                      (PCR_AUTONEG | PCR_AUTONEG_RST));
 330                                 slic_reg32_write(wphy, phy_config, FLUSH);
 331                         }
 332                 }
 333         } else {
 334                 /* Forced 10/100  */
 335                 if (linkspeed == LINK_10MB)
 336                         speed = 0;
 337                 else
 338                         speed = PCR_SPEED_100;
 339                 if (linkduplex == LINK_HALFD)
 340                         duplex = 0;
 341                 else
 342                         duplex = PCR_DUPLEX_FULL;
 343
 344                 if (adapter->subsysid != SLIC_1GB_CICADA_SUBSYS_ID) {
 345                         /* if a Marvell PHY
 346                            disable auto crossover  */
 347                         phy_config = (MIICR_REG_16 | (MRV_REG16_XOVEROFF));
 348                         slic_reg32_write(wphy, phy_config, FLUSH);
 349                 }
 350
 351                 /* power down phy to break link (this may not work)  */
 352                 phy_config = (MIICR_REG_PCR | (PCR_POWERDOWN | speed | duplex));
 353                 slic_reg32_write(wphy, phy_config, FLUSH);
 354
 355                 /* wait, Marvell says 1 sec, try to get away with 10 ms */
 356                 mdelay(10);
 357
 358                 if (adapter->subsysid != SLIC_1GB_CICADA_SUBSYS_ID) {
 359                         /* if a Marvell PHY
 360                            disable auto-neg, set speed,
 361                            soft reset phy, powerup */
 362                         phy_config =
 363                             (MIICR_REG_PCR | (PCR_RESET | speed | duplex));
 364                         slic_reg32_write(wphy, phy_config, FLUSH);
 365                 } else {        /* it's a Cicada PHY  */
 366                         /* disable auto-neg, set speed, powerup  */
 367                         phy_config = (MIICR_REG_PCR | (speed | duplex));
 368                         slic_reg32_write(wphy, phy_config, FLUSH);
 369                 }
 370         }
 371 }
 372
 373 static int slic_card_download_gbrcv(struct adapter *adapter)
 374 {
 375         const struct firmware *fw;
 376         const char *file = "";
 377         int ret;
 378         __iomem struct slic_regs *slic_regs = adapter->slic_regs;
 379         u32 codeaddr;
 380         u32 instruction;
 381         int index = 0;
 382         u32 rcvucodelen = 0;
 383
 384         switch (adapter->devid) {
 385         case SLIC_2GB_DEVICE_ID:
 386                 file = "slicoss/oasisrcvucode.sys";
 387                 break;
 388         case SLIC_1GB_DEVICE_ID:
 389                 file = "slicoss/gbrcvucode.sys";
 390                 break;
 391         default:
 392                 return -ENOENT;
 393         }
 394
 395         ret = request_firmware(&fw, file, &adapter->pcidev->dev);
 396         if (ret) {
 397                 dev_err(&adapter->pcidev->dev,
 398                         "Failed to load firmware %s\n", file);
 399                 return ret;
 400         }
 401
 402         rcvucodelen = *(u32 *)(fw->data + index);
 403         index += 4;
 404         switch (adapter->devid) {
 405         case SLIC_2GB_DEVICE_ID:
 406                 if (rcvucodelen != OasisRcvUCodeLen) {
 407                         release_firmware(fw);
 408                         return -EINVAL;
 409                 }
 410                 break;
 411         case SLIC_1GB_DEVICE_ID:
 412                 if (rcvucodelen != GBRcvUCodeLen) {
 413                         release_firmware(fw);
 414                         return -EINVAL;
 415                 }
 416                 break;
 417         }
 418         /* start download */
 419         slic_reg32_write(&slic_regs->slic_rcv_wcs, SLIC_RCVWCS_BEGIN, FLUSH);
 420         /* download the rcv sequencer ucode */
 421         for (codeaddr = 0; codeaddr < rcvucodelen; codeaddr++) {
 422                 /* write out instruction address */
 423                 slic_reg32_write(&slic_regs->slic_rcv_wcs, codeaddr, FLUSH);
 424
 425                 instruction = *(u32 *)(fw->data + index);
 426                 index += 4;
 427                 /* write out the instruction data low addr */
 428                 slic_reg32_write(&slic_regs->slic_rcv_wcs, instruction, FLUSH);
 429
 430                 instruction = *(u8 *)(fw->data + index);
 431                 index++;
 432                 /* write out the instruction data high addr */
 433                 slic_reg32_write(&slic_regs->slic_rcv_wcs, (u8)instruction,
 434                                  FLUSH);
 435         }
 436
 437         /* download finished */
 438         release_firmware(fw);
 439         slic_reg32_write(&slic_regs->slic_rcv_wcs, SLIC_RCVWCS_FINISH, FLUSH);
 440         return 0;
 441 }
 442
 443 MODULE_FIRMWARE("slicoss/oasisrcvucode.sys");
 444 MODULE_FIRMWARE("slicoss/gbrcvucode.sys");
 445
 446 static int slic_card_download(struct adapter *adapter)
 447 {
 448         const struct firmware *fw;
 449         const char *file = "";
 450         int ret;
 451         u32 section;
 452         int thissectionsize;
 453         int codeaddr;
 454         __iomem struct slic_regs *slic_regs = adapter->slic_regs;
 455         u32 instruction;
 456         u32 baseaddress;
 457         u32 i;
 458         u32 numsects = 0;
 459         u32 sectsize[3];
 460         u32 sectstart[3];
 461         int ucode_start, index = 0;
 462
 463         switch (adapter->devid) {
 464         case SLIC_2GB_DEVICE_ID:
 465                 file = "slicoss/oasisdownload.sys";
 466                 break;
 467         case SLIC_1GB_DEVICE_ID:
 468                 file = "slicoss/gbdownload.sys";
 469                 break;
 470         default:
 471                 return -ENOENT;
 472         }
 473         ret = request_firmware(&fw, file, &adapter->pcidev->dev);
 474         if (ret) {
 475                 dev_err(&adapter->pcidev->dev,
 476                         "Failed to load firmware %s\n", file);
 477                 return ret;
 478         }
 479         numsects = *(u32 *)(fw->data + index);
 480         index += 4;
 481         for (i = 0; i < numsects; i++) {
 482                 sectsize[i] = *(u32 *)(fw->data + index);
 483                 index += 4;
 484         }
 485         for (i = 0; i < numsects; i++) {
 486                 sectstart[i] = *(u32 *)(fw->data + index);
 487                 index += 4;
 488         }
 489         ucode_start = index;
 490         instruction = *(u32 *)(fw->data + index);
 491         index += 4;
 492         for (section = 0; section < numsects; section++) {
 493                 baseaddress = sectstart[section];
 494                 thissectionsize = sectsize[section] >> 3;
 495
 496                 for (codeaddr = 0; codeaddr < thissectionsize; codeaddr++) {
 497                         /* Write out instruction address */
 498                         slic_reg32_write(&slic_regs->slic_wcs,
 499                                          baseaddress + codeaddr, FLUSH);
 500                         /* Write out instruction to low addr */
 501                         slic_reg32_write(&slic_regs->slic_wcs, instruction, FLUSH);
 502                         instruction = *(u32 *)(fw->data + index);
 503                         index += 4;
 504
 505                         /* Write out instruction to high addr */
 506                         slic_reg32_write(&slic_regs->slic_wcs, instruction, FLUSH);
 507                         instruction = *(u32 *)(fw->data + index);
 508                         index += 4;
 509                 }
 510         }
 511         index = ucode_start;
 512         for (section = 0; section < numsects; section++) {
 513                 instruction = *(u32 *)(fw->data + index);
 514                 baseaddress = sectstart[section];
 515                 if (baseaddress < 0x8000)
 516                         continue;
 517                 thissectionsize = sectsize[section] >> 3;
 518
 519                 for (codeaddr = 0; codeaddr < thissectionsize; codeaddr++) {
 520                         /* Write out instruction address */
 521                         slic_reg32_write(&slic_regs->slic_wcs,
 522                                 SLIC_WCS_COMPARE | (baseaddress + codeaddr),
 523                                 FLUSH);
 524                         /* Write out instruction to low addr */
 525                         slic_reg32_write(&slic_regs->slic_wcs, instruction,
 526                                          FLUSH);
 527                         instruction = *(u32 *)(fw->data + index);
 528                         index += 4;
 529                         /* Write out instruction to high addr */
 530                         slic_reg32_write(&slic_regs->slic_wcs, instruction,
 531                                          FLUSH);
 532                         instruction = *(u32 *)(fw->data + index);
 533                         index += 4;
 534
 535                         /* Check SRAM location zero. If it is non-zero. Abort.*/
 536 /*                      failure = readl((u32 __iomem *)&slic_regs->slic_reset);
 537                         if (failure) {
 538                                 release_firmware(fw);
 539                                 return -EIO;
 540                         }*/
 541                 }
 542         }
 543         release_firmware(fw);
 544         /* Everything OK, kick off the card */
 545         mdelay(10);
 546         slic_reg32_write(&slic_regs->slic_wcs, SLIC_WCS_START, FLUSH);
 547
 548         /* stall for 20 ms, long enough for ucode to init card
 549            and reach mainloop */
 550         mdelay(20);
 551
 552         return 0;
 553 }
 554
 555 MODULE_FIRMWARE("slicoss/oasisdownload.sys");
 556 MODULE_FIRMWARE("slicoss/gbdownload.sys");
 557
 558 static void slic_adapter_set_hwaddr(struct adapter *adapter)
 559 {
 560         struct sliccard *card = adapter->card;
 561
 562         if ((adapter->card) && (card->config_set)) {
 563                 memcpy(adapter->macaddr,
 564                        card->config.MacInfo[adapter->functionnumber].macaddrA,
 565                        sizeof(struct slic_config_mac));
 566                 if (is_zero_ether_addr(adapter->currmacaddr))
 567                         memcpy(adapter->currmacaddr, adapter->macaddr,
 568                                ETH_ALEN);
 569                 if (adapter->netdev)
 570                         memcpy(adapter->netdev->dev_addr, adapter->currmacaddr,
 571                                ETH_ALEN);
 572         }
 573 }
 574
 575 static void slic_intagg_set(struct adapter *adapter, u32 value)
 576 {
 577         slic_reg32_write(&adapter->slic_regs->slic_intagg, value, FLUSH);
 578         adapter->card->loadlevel_current = value;
 579 }
 580
 581 static void slic_soft_reset(struct adapter *adapter)
 582 {
 583         if (adapter->card->state == CARD_UP) {
 584                 slic_reg32_write(&adapter->slic_regs->slic_quiesce, 0, FLUSH);
 585                 mdelay(1);
 586         }
 587
 588         slic_reg32_write(&adapter->slic_regs->slic_reset, SLIC_RESET_MAGIC,
 589                          FLUSH);
 590         mdelay(1);
 591 }
 592
 593 static void slic_mac_address_config(struct adapter *adapter)
 594 {
 595         u32 value;
 596         u32 value2;
 597         __iomem struct slic_regs *slic_regs = adapter->slic_regs;
 598
 599         value = *(u32 *) &adapter->currmacaddr[2];
 600         value = ntohl(value);
 601         slic_reg32_write(&slic_regs->slic_wraddral, value, FLUSH);
 602         slic_reg32_write(&slic_regs->slic_wraddrbl, value, FLUSH);
 603
 604         value2 = (u32) ((adapter->currmacaddr[0] << 8 |
 605                              adapter->currmacaddr[1]) & 0xFFFF);
 606
 607         slic_reg32_write(&slic_regs->slic_wraddrah, value2, FLUSH);
 608         slic_reg32_write(&slic_regs->slic_wraddrbh, value2, FLUSH);
 609
 610         /* Write our multicast mask out to the card.  This is done */
 611         /* here in addition to the slic_mcast_addr_set routine     */
 612         /* because ALL_MCAST may have been enabled or disabled     */
 613         slic_mcast_set_mask(adapter);
 614 }
 615
 616 static void slic_mac_config(struct adapter *adapter)
 617 {
 618         u32 value;
 619         __iomem struct slic_regs *slic_regs = adapter->slic_regs;
 620
 621         /* Setup GMAC gaps */
 622         if (adapter->linkspeed == LINK_1000MB) {
 623                 value = ((GMCR_GAPBB_1000 << GMCR_GAPBB_SHIFT) |
 624                          (GMCR_GAPR1_1000 << GMCR_GAPR1_SHIFT) |
 625                          (GMCR_GAPR2_1000 << GMCR_GAPR2_SHIFT));
 626         } else {
 627                 value = ((GMCR_GAPBB_100 << GMCR_GAPBB_SHIFT) |
 628                          (GMCR_GAPR1_100 << GMCR_GAPR1_SHIFT) |
 629                          (GMCR_GAPR2_100 << GMCR_GAPR2_SHIFT));
 630         }
 631
 632         /* enable GMII */
 633         if (adapter->linkspeed == LINK_1000MB)
 634                 value |= GMCR_GBIT;
 635
 636         /* enable fullduplex */
 637         if ((adapter->linkduplex == LINK_FULLD)
 638             || (adapter->macopts & MAC_LOOPBACK)) {
 639                 value |= GMCR_FULLD;
 640         }
 641
 642         /* write mac config */
 643         slic_reg32_write(&slic_regs->slic_wmcfg, value, FLUSH);
 644
 645         /* setup mac addresses */
 646         slic_mac_address_config(adapter);
 647 }
 648
 649 static void slic_config_set(struct adapter *adapter, bool linkchange)
 650 {
 651         u32 value;
 652         u32 RcrReset;
 653         __iomem struct slic_regs *slic_regs = adapter->slic_regs;
 654
 655         if (linkchange) {
 656                 /* Setup MAC */
 657                 slic_mac_config(adapter);
 658                 RcrReset = GRCR_RESET;
 659         } else {
 660                 slic_mac_address_config(adapter);
 661                 RcrReset = 0;
 662         }
 663
 664         if (adapter->linkduplex == LINK_FULLD) {
 665                 /* setup xmtcfg */
 666                 value = (GXCR_RESET |   /* Always reset     */
 667                          GXCR_XMTEN |   /* Enable transmit  */
 668                          GXCR_PAUSEEN); /* Enable pause     */
 669
 670                 slic_reg32_write(&slic_regs->slic_wxcfg, value, FLUSH);
 671
 672                 /* Setup rcvcfg last */
 673                 value = (RcrReset |     /* Reset, if linkchange */
 674                          GRCR_CTLEN |   /* Enable CTL frames    */
 675                          GRCR_ADDRAEN | /* Address A enable     */
 676                          GRCR_RCVBAD |  /* Rcv bad frames       */
 677                          (GRCR_HASHSIZE << GRCR_HASHSIZE_SHIFT));
 678         } else {
 679                 /* setup xmtcfg */
 680                 value = (GXCR_RESET |   /* Always reset     */
 681                          GXCR_XMTEN);   /* Enable transmit  */
 682
 683                 slic_reg32_write(&slic_regs->slic_wxcfg, value, FLUSH);
 684
 685                 /* Setup rcvcfg last */
 686                 value = (RcrReset |     /* Reset, if linkchange */
 687                          GRCR_ADDRAEN | /* Address A enable     */
 688                          GRCR_RCVBAD |  /* Rcv bad frames       */
 689                          (GRCR_HASHSIZE << GRCR_HASHSIZE_SHIFT));
 690         }
 691
 692         if (adapter->state != ADAPT_DOWN) {
 693                 /* Only enable receive if we are restarting or running */
 694                 value |= GRCR_RCVEN;
 695         }
 696
 697         if (adapter->macopts & MAC_PROMISC)
 698                 value |= GRCR_RCVALL;
 699
 700         slic_reg32_write(&slic_regs->slic_wrcfg, value, FLUSH);
 701 }
 702
 703 /*
 704  *  Turn off RCV and XMT, power down PHY
 705  */
 706 static void slic_config_clear(struct adapter *adapter)
 707 {
 708         u32 value;
 709         u32 phy_config;
 710         __iomem struct slic_regs *slic_regs = adapter->slic_regs;
 711
 712         /* Setup xmtcfg */
 713         value = (GXCR_RESET |   /* Always reset */
 714                  GXCR_PAUSEEN); /* Enable pause */
 715
 716         slic_reg32_write(&slic_regs->slic_wxcfg, value, FLUSH);
 717
 718         value = (GRCR_RESET |   /* Always reset      */
 719                  GRCR_CTLEN |   /* Enable CTL frames */
 720                  GRCR_ADDRAEN | /* Address A enable  */
 721                  (GRCR_HASHSIZE << GRCR_HASHSIZE_SHIFT));
 722
 723         slic_reg32_write(&slic_regs->slic_wrcfg, value, FLUSH);
 724
 725         /* power down phy */
 726         phy_config = (MIICR_REG_PCR | (PCR_POWERDOWN));
 727         slic_reg32_write(&slic_regs->slic_wphy, phy_config, FLUSH);
 728 }
 729
 730 static bool slic_mac_filter(struct adapter *adapter,
 731                         struct ether_header *ether_frame)
 732 {
 733         struct net_device *netdev = adapter->netdev;
 734         u32 opts = adapter->macopts;
 735
 736         if (opts & MAC_PROMISC)
 737                 return true;
 738
 739         if (is_broadcast_ether_addr(ether_frame->ether_dhost)) {
 740                 if (opts & MAC_BCAST) {
 741                         adapter->rcv_broadcasts++;
 742                         return true;
 743                 } else {
 744                         return false;
 745                 }
 746         }
 747
 748         if (is_multicast_ether_addr(ether_frame->ether_dhost)) {
 749                 if (opts & MAC_ALLMCAST) {
 750                         adapter->rcv_multicasts++;
 751                         netdev->stats.multicast++;
 752                         return true;
 753                 }
 754                 if (opts & MAC_MCAST) {
 755                         struct mcast_address *mcaddr = adapter->mcastaddrs;
 756
 757                         while (mcaddr) {
 758                                 if (ether_addr_equal(mcaddr->address,
 759                                                      ether_frame->ether_dhost)) {
 760                                         adapter->rcv_multicasts++;
 761                                         netdev->stats.multicast++;
 762                                         return true;
 763                                 }
 764                                 mcaddr = mcaddr->next;
 765                         }
 766                         return false;
 767                 } else {
 768                         return false;
 769                 }
 770         }
 771         if (opts & MAC_DIRECTED) {
 772                 adapter->rcv_unicasts++;
 773                 return true;
 774         }
 775         return false;
 776
 777 }
 778
 779 static int slic_mac_set_address(struct net_device *dev, void *ptr)
 780 {
 781         struct adapter *adapter = netdev_priv(dev);
 782         struct sockaddr *addr = ptr;
 783
 784         if (netif_running(dev))
 785                 return -EBUSY;
 786         if (!adapter)
 787                 return -EBUSY;
 788
 789         if (!is_valid_ether_addr(addr->sa_data))
 790                 return -EINVAL;
 791
 792         memcpy(dev->dev_addr, addr->sa_data, dev->addr_len);
 793         memcpy(adapter->currmacaddr, addr->sa_data, dev->addr_len);
 794
 795         slic_config_set(adapter, true);
 796         return 0;
 797 }
 798
 799 static void slic_timer_load_check(ulong cardaddr)
 800 {
 801         struct sliccard *card = (struct sliccard *)cardaddr;
 802         struct adapter *adapter = card->master;
 803         u32 __iomem *intagg;
 804         u32 load = card->events;
 805         u32 level = 0;
 806
 807         if ((adapter) && (adapter->state == ADAPT_UP) &&
 808             (card->state == CARD_UP) && (slic_global.dynamic_intagg)) {
 809                 intagg = &adapter->slic_regs->slic_intagg;
 810                 if (adapter->devid == SLIC_1GB_DEVICE_ID) {
 811                         if (adapter->linkspeed == LINK_1000MB)
 812                                 level = 100;
 813                         else {
 814                                 if (load > SLIC_LOAD_5)
 815                                         level = SLIC_INTAGG_5;
 816                                 else if (load > SLIC_LOAD_4)
 817                                         level = SLIC_INTAGG_4;
 818                                 else if (load > SLIC_LOAD_3)
 819                                         level = SLIC_INTAGG_3;
 820                                 else if (load > SLIC_LOAD_2)
 821                                         level = SLIC_INTAGG_2;
 822                                 else if (load > SLIC_LOAD_1)
 823                                         level = SLIC_INTAGG_1;
 824                                 else
 825                                         level = SLIC_INTAGG_0;
 826                         }
 827                         if (card->loadlevel_current != level) {
 828                                 card->loadlevel_current = level;
 829                                 slic_reg32_write(intagg, level, FLUSH);
 830                         }
 831                 } else {
 832                         if (load > SLIC_LOAD_5)
 833                                 level = SLIC_INTAGG_5;
 834                         else if (load > SLIC_LOAD_4)
 835                                 level = SLIC_INTAGG_4;
 836                         else if (load > SLIC_LOAD_3)
 837                                 level = SLIC_INTAGG_3;
 838                         else if (load > SLIC_LOAD_2)
 839                                 level = SLIC_INTAGG_2;
 840                         else if (load > SLIC_LOAD_1)
 841                                 level = SLIC_INTAGG_1;
 842                         else
 843                                 level = SLIC_INTAGG_0;
 844                         if (card->loadlevel_current != level) {
 845                                 card->loadlevel_current = level;
 846                                 slic_reg32_write(intagg, level, FLUSH);
 847                         }
 848                 }
 849         }
 850         card->events = 0;
 851         card->loadtimer.expires = jiffies + (SLIC_LOADTIMER_PERIOD * HZ);
 852         add_timer(&card->loadtimer);
 853 }
 854
 855 static int slic_upr_queue_request(struct adapter *adapter,
 856                            u32 upr_request,
 857                            u32 upr_data,
 858                            u32 upr_data_h,
 859                            u32 upr_buffer, u32 upr_buffer_h)
 860 {
 861         struct slic_upr *upr;
 862         struct slic_upr *uprqueue;
 863
 864         upr = kmalloc(sizeof(struct slic_upr), GFP_ATOMIC);
 865         if (!upr)
 866                 return -ENOMEM;
 867
 868         upr->adapter = adapter->port;
 869         upr->upr_request = upr_request;
 870         upr->upr_data = upr_data;
 871         upr->upr_buffer = upr_buffer;
 872         upr->upr_data_h = upr_data_h;
 873         upr->upr_buffer_h = upr_buffer_h;
 874         upr->next = NULL;
 875         if (adapter->upr_list) {
 876                 uprqueue = adapter->upr_list;
 877
 878                 while (uprqueue->next)
 879                         uprqueue = uprqueue->next;
 880                 uprqueue->next = upr;
 881         } else {
 882                 adapter->upr_list = upr;
 883         }
 884         return 0;
 885 }
 886
 887 static void slic_upr_start(struct adapter *adapter)
 888 {
 889         struct slic_upr *upr;
 890         __iomem struct slic_regs *slic_regs = adapter->slic_regs;
 891 /*
 892     char * ptr1;
 893     char * ptr2;
 894     uint cmdoffset;
 895 */
 896         upr = adapter->upr_list;
 897         if (!upr)
 898                 return;
 899         if (adapter->upr_busy)
 900                 return;
 901         adapter->upr_busy = 1;
 902
 903         switch (upr->upr_request) {
 904         case SLIC_UPR_STATS:
 905                 if (upr->upr_data_h == 0) {
 906                         slic_reg32_write(&slic_regs->slic_stats, upr->upr_data,
 907                                          FLUSH);
 908                 } else {
 909                         slic_reg64_write(adapter, &slic_regs->slic_stats64,
 910                                          upr->upr_data,
 911                                          &slic_regs->slic_addr_upper,
 912                                          upr->upr_data_h, FLUSH);
 913                 }
 914                 break;
 915
 916         case SLIC_UPR_RLSR:
 917                 slic_reg64_write(adapter, &slic_regs->slic_rlsr, upr->upr_data,
 918                                  &slic_regs->slic_addr_upper, upr->upr_data_h,
 919                                  FLUSH);
 920                 break;
 921
 922         case SLIC_UPR_RCONFIG:
 923                 slic_reg64_write(adapter, &slic_regs->slic_rconfig,
 924                                  upr->upr_data, &slic_regs->slic_addr_upper,
 925                                  upr->upr_data_h, FLUSH);
 926                 break;
 927         case SLIC_UPR_PING:
 928                 slic_reg32_write(&slic_regs->slic_ping, 1, FLUSH);
 929                 break;
 930         }
 931 }
 932
 933 static int slic_upr_request(struct adapter *adapter,
 934                      u32 upr_request,
 935                      u32 upr_data,
 936                      u32 upr_data_h,
 937                      u32 upr_buffer, u32 upr_buffer_h)
 938 {
 939         int rc;
 940
 941         spin_lock_irqsave(&adapter->upr_lock.lock, adapter->upr_lock.flags);
 942         rc = slic_upr_queue_request(adapter,
 943                                         upr_request,
 944                                         upr_data,
 945                                         upr_data_h, upr_buffer, upr_buffer_h);
 946         if (rc)
 947                 goto err_unlock_irq;
 948
 949         slic_upr_start(adapter);
 950 err_unlock_irq:
 951         spin_unlock_irqrestore(&adapter->upr_lock.lock,
 952                                 adapter->upr_lock.flags);
 953         return rc;
 954 }
 955
 956 static void slic_link_upr_complete(struct adapter *adapter, u32 isr)
 957 {
 958         u32 linkstatus = adapter->pshmem->linkstatus;
 959         uint linkup;
 960         unsigned char linkspeed;
 961         unsigned char linkduplex;
 962
 963         if ((isr & ISR_UPCERR) || (isr & ISR_UPCBSY)) {
 964                 struct slic_shmem *pshmem;
 965
 966                 pshmem = (struct slic_shmem *)(unsigned long)
 967                          adapter->phys_shmem;
 968 #if BITS_PER_LONG == 64
 969                 slic_upr_queue_request(adapter,
 970                                        SLIC_UPR_RLSR,
 971                                        SLIC_GET_ADDR_LOW(&pshmem->linkstatus),
 972                                        SLIC_GET_ADDR_HIGH(&pshmem->linkstatus),
 973                                        0, 0);
 974 #else
 975                 slic_upr_queue_request(adapter,
 976                                        SLIC_UPR_RLSR,
 977                                        (u32) &pshmem->linkstatus,
 978                                        SLIC_GET_ADDR_HIGH(pshmem), 0, 0);
 979 #endif
 980                 return;
 981         }
 982         if (adapter->state != ADAPT_UP)
 983                 return;
 984
 985         linkup = linkstatus & GIG_LINKUP ? LINK_UP : LINK_DOWN;
 986         if (linkstatus & GIG_SPEED_1000)
 987                 linkspeed = LINK_1000MB;
 988         else if (linkstatus & GIG_SPEED_100)
 989                 linkspeed = LINK_100MB;
 990         else
 991                 linkspeed = LINK_10MB;
 992
 993         if (linkstatus & GIG_FULLDUPLEX)
 994                 linkduplex = LINK_FULLD;
 995         else
 996                 linkduplex = LINK_HALFD;
 997
 998         if ((adapter->linkstate == LINK_DOWN) && (linkup == LINK_DOWN))
 999                 return;
1000
1001         /* link up event, but nothing has changed */
1002         if ((adapter->linkstate == LINK_UP) &&
1003             (linkup == LINK_UP) &&
1004             (adapter->linkspeed == linkspeed) &&
1005             (adapter->linkduplex == linkduplex))
1006                 return;
1007
1008         /* link has changed at this point */
1009
1010         /* link has gone from up to down */
1011         if (linkup == LINK_DOWN) {
1012                 adapter->linkstate = LINK_DOWN;
1013                 return;
1014         }
1015
1016         /* link has gone from down to up */
1017         adapter->linkspeed = linkspeed;
1018         adapter->linkduplex = linkduplex;
1019
1020         if (adapter->linkstate != LINK_UP) {
1021                 /* setup the mac */
1022                 slic_config_set(adapter, true);
1023                 adapter->linkstate = LINK_UP;
1024                 netif_start_queue(adapter->netdev);
1025         }
1026 }
1027
1028 static void slic_upr_request_complete(struct adapter *adapter, u32 isr)
1029 {
1030         struct sliccard *card = adapter->card;
1031         struct slic_upr *upr;
1032
1033         spin_lock_irqsave(&adapter->upr_lock.lock, adapter->upr_lock.flags);
1034         upr = adapter->upr_list;
1035         if (!upr) {
1036                 spin_unlock_irqrestore(&adapter->upr_lock.lock,
1037                                         adapter->upr_lock.flags);
1038                 return;
1039         }
1040         adapter->upr_list = upr->next;
1041         upr->next = NULL;
1042         adapter->upr_busy = 0;
1043         switch (upr->upr_request) {
1044         case SLIC_UPR_STATS:
1045                 {
1046                         struct slic_stats *slicstats =
1047                             (struct slic_stats *) &adapter->pshmem->inicstats;
1048                         struct slic_stats *newstats = slicstats;
1049                         struct slic_stats  *old = &adapter->inicstats_prev;
1050                         struct slicnet_stats *stst = &adapter->slic_stats;
1051
1052                         if (isr & ISR_UPCERR) {
1053                                 dev_err(&adapter->netdev->dev,
1054                                         "SLIC_UPR_STATS command failed isr[%x]\n",
1055                                         isr);
1056
1057                                 break;
1058                         }
1059                         UPDATE_STATS_GB(stst->tcp.xmit_tcp_segs,
1060                                         newstats->xmit_tcp_segs_gb,
1061                                         old->xmit_tcp_segs_gb);
1062
1063                         UPDATE_STATS_GB(stst->tcp.xmit_tcp_bytes,
1064                                         newstats->xmit_tcp_bytes_gb,
1065                                         old->xmit_tcp_bytes_gb);
1066
1067                         UPDATE_STATS_GB(stst->tcp.rcv_tcp_segs,
1068                                         newstats->rcv_tcp_segs_gb,
1069                                         old->rcv_tcp_segs_gb);
1070
1071                         UPDATE_STATS_GB(stst->tcp.rcv_tcp_bytes,
1072                                         newstats->rcv_tcp_bytes_gb,
1073                                         old->rcv_tcp_bytes_gb);
1074
1075                         UPDATE_STATS_GB(stst->iface.xmt_bytes,
1076                                         newstats->xmit_bytes_gb,
1077                                         old->xmit_bytes_gb);
1078
1079                         UPDATE_STATS_GB(stst->iface.xmt_ucast,
1080                                         newstats->xmit_unicasts_gb,
1081                                         old->xmit_unicasts_gb);
1082
1083                         UPDATE_STATS_GB(stst->iface.rcv_bytes,
1084                                         newstats->rcv_bytes_gb,
1085                                         old->rcv_bytes_gb);
1086
1087                         UPDATE_STATS_GB(stst->iface.rcv_ucast,
1088                                         newstats->rcv_unicasts_gb,
1089                                         old->rcv_unicasts_gb);
1090
1091                         UPDATE_STATS_GB(stst->iface.xmt_errors,
1092                                         newstats->xmit_collisions_gb,
1093                                         old->xmit_collisions_gb);
1094
1095                         UPDATE_STATS_GB(stst->iface.xmt_errors,
1096                                         newstats->xmit_excess_collisions_gb,
1097                                         old->xmit_excess_collisions_gb);
1098
1099                         UPDATE_STATS_GB(stst->iface.xmt_errors,
1100                                         newstats->xmit_other_error_gb,
1101                                         old->xmit_other_error_gb);
1102
1103                         UPDATE_STATS_GB(stst->iface.rcv_errors,
1104                                         newstats->rcv_other_error_gb,
1105                                         old->rcv_other_error_gb);
1106
1107                         UPDATE_STATS_GB(stst->iface.rcv_discards,
1108                                         newstats->rcv_drops_gb,
1109                                         old->rcv_drops_gb);
1110
1111                         if (newstats->rcv_drops_gb > old->rcv_drops_gb) {
1112                                 adapter->rcv_drops +=
1113                                     (newstats->rcv_drops_gb -
1114                                      old->rcv_drops_gb);
1115                         }
1116                         memcpy(old, newstats, sizeof(struct slic_stats));
1117                         break;
1118                 }
1119         case SLIC_UPR_RLSR:
1120                 slic_link_upr_complete(adapter, isr);
1121                 break;
1122         case SLIC_UPR_RCONFIG:
1123                 break;
1124         case SLIC_UPR_PING:
1125                 card->pingstatus |= (isr & ISR_PINGDSMASK);
1126                 break;
1127         }
1128         kfree(upr);
1129         slic_upr_start(adapter);
1130         spin_unlock_irqrestore(&adapter->upr_lock.lock,
1131                                 adapter->upr_lock.flags);
1132 }
1133
1134 static int slic_config_get(struct adapter *adapter, u32 config, u32 config_h)
1135 {
1136         return slic_upr_request(adapter, SLIC_UPR_RCONFIG, config, config_h,
1137                                 0, 0);
1138 }
1139
1140 /*
1141  * Compute a checksum of the EEPROM according to RFC 1071.
1142  */
1143 static u16 slic_eeprom_cksum(void *eeprom, unsigned len)
1144 {
1145         u16 *wp = eeprom;
1146         u32 checksum = 0;
1147
1148         while (len > 1) {
1149                 checksum += *(wp++);
1150                 len -= 2;
1151         }
1152
1153         if (len > 0)
1154                 checksum += *(u8 *) wp;
1155
1156
1157         while (checksum >> 16)
1158                 checksum = (checksum & 0xFFFF) + ((checksum >> 16) & 0xFFFF);
1159
1160         return ~checksum;
1161 }
1162
1163 static void slic_rspqueue_free(struct adapter *adapter)
1164 {
1165         int i;
1166         struct slic_rspqueue *rspq = &adapter->rspqueue;
1167
1168         for (i = 0; i < rspq->num_pages; i++) {
1169                 if (rspq->vaddr[i]) {
1170                         pci_free_consistent(adapter->pcidev, PAGE_SIZE,
1171                                             rspq->vaddr[i], rspq->paddr[i]);
1172                 }
1173                 rspq->vaddr[i] = NULL;
1174                 rspq->paddr[i] = 0;
1175         }
1176         rspq->offset = 0;
1177         rspq->pageindex = 0;
1178         rspq->rspbuf = NULL;
1179 }
1180
1181 static int slic_rspqueue_init(struct adapter *adapter)
1182 {
1183         int i;
1184         struct slic_rspqueue *rspq = &adapter->rspqueue;
1185         __iomem struct slic_regs *slic_regs = adapter->slic_regs;
1186         u32 paddrh = 0;
1187
1188         memset(rspq, 0, sizeof(struct slic_rspqueue));
1189
1190         rspq->num_pages = SLIC_RSPQ_PAGES_GB;
1191
1192         for (i = 0; i < rspq->num_pages; i++) {
1193                 rspq->vaddr[i] = pci_alloc_consistent(adapter->pcidev,
1194                                                       PAGE_SIZE,
1195                                                       &rspq->paddr[i]);
1196                 if (!rspq->vaddr[i]) {
1197                         dev_err(&adapter->pcidev->dev,
1198                                 "pci_alloc_consistent failed\n");
1199                         slic_rspqueue_free(adapter);
1200                         return -ENOMEM;
1201                 }
1202                 /* FIXME:
1203                  * do we really need this assertions (4K PAGE_SIZE aligned addr)? */
1204                 memset(rspq->vaddr[i], 0, PAGE_SIZE);
1205
1206                 if (paddrh == 0) {
1207                         slic_reg32_write(&slic_regs->slic_rbar,
1208                                 (rspq->paddr[i] | SLIC_RSPQ_BUFSINPAGE),
1209                                 DONT_FLUSH);
1210                 } else {
1211                         slic_reg64_write(adapter, &slic_regs->slic_rbar64,
1212                                 (rspq->paddr[i] | SLIC_RSPQ_BUFSINPAGE),
1213                                 &slic_regs->slic_addr_upper,
1214                                 paddrh, DONT_FLUSH);
1215                 }
1216         }
1217         rspq->offset = 0;
1218         rspq->pageindex = 0;
1219         rspq->rspbuf = (struct slic_rspbuf *)rspq->vaddr[0];
1220         return 0;
1221 }
1222
1223 static struct slic_rspbuf *slic_rspqueue_getnext(struct adapter *adapter)
1224 {
1225         struct slic_rspqueue *rspq = &adapter->rspqueue;
1226         struct slic_rspbuf *buf;
1227
1228         if (!(rspq->rspbuf->status))
1229                 return NULL;
1230
1231         buf = rspq->rspbuf;
1232         if (++rspq->offset < SLIC_RSPQ_BUFSINPAGE) {
1233                 rspq->rspbuf++;
1234         } else {
1235                 slic_reg64_write(adapter, &adapter->slic_regs->slic_rbar64,
1236                         (rspq->paddr[rspq->pageindex] | SLIC_RSPQ_BUFSINPAGE),
1237                         &adapter->slic_regs->slic_addr_upper, 0, DONT_FLUSH);
1238                 rspq->pageindex = (rspq->pageindex + 1) % rspq->num_pages;
1239                 rspq->offset = 0;
1240                 rspq->rspbuf = (struct slic_rspbuf *)
1241                                                 rspq->vaddr[rspq->pageindex];
1242         }
1243
1244         return buf;
1245 }
1246
1247 static void slic_cmdqmem_free(struct adapter *adapter)
1248 {
1249         struct slic_cmdqmem *cmdqmem = &adapter->cmdqmem;
1250         int i;
1251
1252         for (i = 0; i < SLIC_CMDQ_MAXPAGES; i++) {
1253                 if (cmdqmem->pages[i]) {
1254                         pci_free_consistent(adapter->pcidev,
1255                                             PAGE_SIZE,
1256                                             (void *) cmdqmem->pages[i],
1257                                             cmdqmem->dma_pages[i]);
1258                 }
1259         }
1260         memset(cmdqmem, 0, sizeof(struct slic_cmdqmem));
1261 }
1262
1263 static u32 *slic_cmdqmem_addpage(struct adapter *adapter)
1264 {
1265         struct slic_cmdqmem *cmdqmem = &adapter->cmdqmem;
1266         u32 *pageaddr;
1267
1268         if (cmdqmem->pagecnt >= SLIC_CMDQ_MAXPAGES)
1269                 return NULL;
1270         pageaddr = pci_alloc_consistent(adapter->pcidev,
1271                                         PAGE_SIZE,
1272                                         &cmdqmem->dma_pages[cmdqmem->pagecnt]);
1273         if (!pageaddr)
1274                 return NULL;
1275
1276         cmdqmem->pages[cmdqmem->pagecnt] = pageaddr;
1277         cmdqmem->pagecnt++;
1278         return pageaddr;
1279 }
1280
1281 static void slic_cmdq_free(struct adapter *adapter)
1282 {
1283         struct slic_hostcmd *cmd;
1284
1285         cmd = adapter->cmdq_all.head;
1286         while (cmd) {
1287                 if (cmd->busy) {
1288                         struct sk_buff *tempskb;
1289
1290                         tempskb = cmd->skb;
1291                         if (tempskb) {
1292                                 cmd->skb = NULL;
1293                                 dev_kfree_skb_irq(tempskb);
1294                         }
1295                 }
1296                 cmd = cmd->next_all;
1297         }
1298         memset(&adapter->cmdq_all, 0, sizeof(struct slic_cmdqueue));
1299         memset(&adapter->cmdq_free, 0, sizeof(struct slic_cmdqueue));
1300         memset(&adapter->cmdq_done, 0, sizeof(struct slic_cmdqueue));
1301         slic_cmdqmem_free(adapter);
1302 }
1303
1304 static void slic_cmdq_addcmdpage(struct adapter *adapter, u32 *page)
1305 {
1306         struct slic_hostcmd *cmd;
1307         struct slic_hostcmd *prev;
1308         struct slic_hostcmd *tail;
1309         struct slic_cmdqueue *cmdq;
1310         int cmdcnt;
1311         void *cmdaddr;
1312         ulong phys_addr;
1313         u32 phys_addrl;
1314         u32 phys_addrh;
1315         struct slic_handle *pslic_handle;
1316
1317         cmdaddr = page;
1318         cmd = (struct slic_hostcmd *)cmdaddr;
1319         cmdcnt = 0;
1320
1321         phys_addr = virt_to_bus((void *)page);
1322         phys_addrl = SLIC_GET_ADDR_LOW(phys_addr);
1323         phys_addrh = SLIC_GET_ADDR_HIGH(phys_addr);
1324
1325         prev = NULL;
1326         tail = cmd;
1327         while ((cmdcnt < SLIC_CMDQ_CMDSINPAGE) &&
1328                (adapter->slic_handle_ix < 256)) {
1329                 /* Allocate and initialize a SLIC_HANDLE for this command */
1330                 spin_lock_irqsave(&adapter->handle_lock.lock,
1331                                 adapter->handle_lock.flags);
1332                 pslic_handle  =  adapter->pfree_slic_handles;
1333                 adapter->pfree_slic_handles = pslic_handle->next;
1334                 spin_unlock_irqrestore(&adapter->handle_lock.lock,
1335                                 adapter->handle_lock.flags);
1336                 pslic_handle->type = SLIC_HANDLE_CMD;
1337                 pslic_handle->address = (void *) cmd;
1338                 pslic_handle->offset = (ushort) adapter->slic_handle_ix++;
1339                 pslic_handle->other_handle = NULL;
1340                 pslic_handle->next = NULL;
1341
1342                 cmd->pslic_handle = pslic_handle;
1343                 cmd->cmd64.hosthandle = pslic_handle->token.handle_token;
1344                 cmd->busy = false;
1345                 cmd->paddrl = phys_addrl;
1346                 cmd->paddrh = phys_addrh;
1347                 cmd->next_all = prev;
1348                 cmd->next = prev;
1349                 prev = cmd;
1350                 phys_addrl += SLIC_HOSTCMD_SIZE;
1351                 cmdaddr += SLIC_HOSTCMD_SIZE;
1352
1353                 cmd = (struct slic_hostcmd *)cmdaddr;
1354                 cmdcnt++;
1355         }
1356
1357         cmdq = &adapter->cmdq_all;
1358         cmdq->count += cmdcnt;  /*  SLIC_CMDQ_CMDSINPAGE;   mooktodo */
1359         tail->next_all = cmdq->head;
1360         cmdq->head = prev;
1361         cmdq = &adapter->cmdq_free;
1362         spin_lock_irqsave(&cmdq->lock.lock, cmdq->lock.flags);
1363         cmdq->count += cmdcnt;  /*  SLIC_CMDQ_CMDSINPAGE;   mooktodo */
1364         tail->next = cmdq->head;
1365         cmdq->head = prev;
1366         spin_unlock_irqrestore(&cmdq->lock.lock, cmdq->lock.flags);
1367 }
1368
1369 static int slic_cmdq_init(struct adapter *adapter)
1370 {
1371         int i;
1372         u32 *pageaddr;
1373
1374         memset(&adapter->cmdq_all, 0, sizeof(struct slic_cmdqueue));
1375         memset(&adapter->cmdq_free, 0, sizeof(struct slic_cmdqueue));
1376         memset(&adapter->cmdq_done, 0, sizeof(struct slic_cmdqueue));
1377         spin_lock_init(&adapter->cmdq_all.lock.lock);
1378         spin_lock_init(&adapter->cmdq_free.lock.lock);
1379         spin_lock_init(&adapter->cmdq_done.lock.lock);
1380         memset(&adapter->cmdqmem, 0, sizeof(struct slic_cmdqmem));
1381         adapter->slic_handle_ix = 1;
1382         for (i = 0; i < SLIC_CMDQ_INITPAGES; i++) {
1383                 pageaddr = slic_cmdqmem_addpage(adapter);
1384                 if (!pageaddr) {
1385                         slic_cmdq_free(adapter);
1386                         return -ENOMEM;
1387                 }
1388                 slic_cmdq_addcmdpage(adapter, pageaddr);
1389         }
1390         adapter->slic_handle_ix = 1;
1391
1392         return 0;
1393 }
1394
1395 static void slic_cmdq_reset(struct adapter *adapter)
1396 {
1397         struct slic_hostcmd *hcmd;
1398         struct sk_buff *skb;
1399         u32 outstanding;
1400
1401         spin_lock_irqsave(&adapter->cmdq_free.lock.lock,
1402                         adapter->cmdq_free.lock.flags);
1403         spin_lock_irqsave(&adapter->cmdq_done.lock.lock,
1404                         adapter->cmdq_done.lock.flags);
1405         outstanding = adapter->cmdq_all.count - adapter->cmdq_done.count;
1406         outstanding -= adapter->cmdq_free.count;
1407         hcmd = adapter->cmdq_all.head;
1408         while (hcmd) {
1409                 if (hcmd->busy) {
1410                         skb = hcmd->skb;
1411                         hcmd->busy = 0;
1412                         hcmd->skb = NULL;
1413                         dev_kfree_skb_irq(skb);
1414                 }
1415                 hcmd = hcmd->next_all;
1416         }
1417         adapter->cmdq_free.count = 0;
1418         adapter->cmdq_free.head = NULL;
1419         adapter->cmdq_free.tail = NULL;
1420         adapter->cmdq_done.count = 0;
1421         adapter->cmdq_done.head = NULL;
1422         adapter->cmdq_done.tail = NULL;
1423         adapter->cmdq_free.head = adapter->cmdq_all.head;
1424         hcmd = adapter->cmdq_all.head;
1425         while (hcmd) {
1426                 adapter->cmdq_free.count++;
1427                 hcmd->next = hcmd->next_all;
1428                 hcmd = hcmd->next_all;
1429         }
1430         if (adapter->cmdq_free.count != adapter->cmdq_all.count) {
1431                 dev_err(&adapter->netdev->dev,
1432                         "free_count %d != all count %d\n",
1433                         adapter->cmdq_free.count, adapter->cmdq_all.count);
1434         }
1435         spin_unlock_irqrestore(&adapter->cmdq_done.lock.lock,
1436                                 adapter->cmdq_done.lock.flags);
1437         spin_unlock_irqrestore(&adapter->cmdq_free.lock.lock,
1438                                 adapter->cmdq_free.lock.flags);
1439 }
1440
1441 static void slic_cmdq_getdone(struct adapter *adapter)
1442 {
1443         struct slic_cmdqueue *done_cmdq = &adapter->cmdq_done;
1444         struct slic_cmdqueue *free_cmdq = &adapter->cmdq_free;
1445
1446         spin_lock_irqsave(&done_cmdq->lock.lock, done_cmdq->lock.flags);
1447
1448         free_cmdq->head = done_cmdq->head;
1449         free_cmdq->count = done_cmdq->count;
1450         done_cmdq->head = NULL;
1451         done_cmdq->tail = NULL;
1452         done_cmdq->count = 0;
1453         spin_unlock_irqrestore(&done_cmdq->lock.lock, done_cmdq->lock.flags);
1454 }
1455
1456 static struct slic_hostcmd *slic_cmdq_getfree(struct adapter *adapter)
1457 {
1458         struct slic_cmdqueue *cmdq = &adapter->cmdq_free;
1459         struct slic_hostcmd *cmd = NULL;
1460
1461 lock_and_retry:
1462         spin_lock_irqsave(&cmdq->lock.lock, cmdq->lock.flags);
1463 retry:
1464         cmd = cmdq->head;
1465         if (cmd) {
1466                 cmdq->head = cmd->next;
1467                 cmdq->count--;
1468                 spin_unlock_irqrestore(&cmdq->lock.lock, cmdq->lock.flags);
1469         } else {
1470                 slic_cmdq_getdone(adapter);
1471                 cmd = cmdq->head;
1472                 if (cmd) {
1473                         goto retry;
1474                 } else {
1475                         u32 *pageaddr;
1476
1477                         spin_unlock_irqrestore(&cmdq->lock.lock,
1478                                                 cmdq->lock.flags);
1479                         pageaddr = slic_cmdqmem_addpage(adapter);
1480                         if (pageaddr) {
1481                                 slic_cmdq_addcmdpage(adapter, pageaddr);
1482                                 goto lock_and_retry;
1483                         }
1484                 }
1485         }
1486         return cmd;
1487 }
1488
1489 static void slic_cmdq_putdone_irq(struct adapter *adapter,
1490                                 struct slic_hostcmd *cmd)
1491 {
1492         struct slic_cmdqueue *cmdq = &adapter->cmdq_done;
1493
1494         spin_lock(&cmdq->lock.lock);
1495         cmd->busy = 0;
1496         cmd->next = cmdq->head;
1497         cmdq->head = cmd;
1498         cmdq->count++;
1499         if ((adapter->xmitq_full) && (cmdq->count > 10))
1500                 netif_wake_queue(adapter->netdev);
1501         spin_unlock(&cmdq->lock.lock);
1502 }
1503
1504 static int slic_rcvqueue_fill(struct adapter *adapter)
1505 {
1506         void *paddr;
1507         u32 paddrl;
1508         u32 paddrh;
1509         struct slic_rcvqueue *rcvq = &adapter->rcvqueue;
1510         int i = 0;
1511         struct device *dev = &adapter->netdev->dev;
1512
1513         while (i < SLIC_RCVQ_FILLENTRIES) {
1514                 struct slic_rcvbuf *rcvbuf;
1515                 struct sk_buff *skb;
1516 #ifdef KLUDGE_FOR_4GB_BOUNDARY
1517 retry_rcvqfill:
1518 #endif
1519                 skb = alloc_skb(SLIC_RCVQ_RCVBUFSIZE, GFP_ATOMIC);
1520                 if (skb) {
1521                         paddr = (void *)(unsigned long)
1522                                 pci_map_single(adapter->pcidev,
1523                                                skb->data,
1524                                                SLIC_RCVQ_RCVBUFSIZE,
1525                                                PCI_DMA_FROMDEVICE);
1526                         paddrl = SLIC_GET_ADDR_LOW(paddr);
1527                         paddrh = SLIC_GET_ADDR_HIGH(paddr);
1528
1529                         skb->len = SLIC_RCVBUF_HEADSIZE;
1530                         rcvbuf = (struct slic_rcvbuf *)skb->head;
1531                         rcvbuf->status = 0;
1532                         skb->next = NULL;
1533 #ifdef KLUDGE_FOR_4GB_BOUNDARY
1534                         if (paddrl == 0) {
1535                                 dev_err(dev, "%s: LOW 32bits PHYSICAL ADDRESS == 0\n",
1536                                         __func__);
1537                                 dev_err(dev, "skb[%p] PROBLEM\n", skb);
1538                                 dev_err(dev, "         skbdata[%p]\n", skb->data);
1539                                 dev_err(dev, "         skblen[%x]\n", skb->len);
1540                                 dev_err(dev, "         paddr[%p]\n", paddr);
1541                                 dev_err(dev, "         paddrl[%x]\n", paddrl);
1542                                 dev_err(dev, "         paddrh[%x]\n", paddrh);
1543                                 dev_err(dev, "         rcvq->head[%p]\n", rcvq->head);
1544                                 dev_err(dev, "         rcvq->tail[%p]\n", rcvq->tail);
1545                                 dev_err(dev, "         rcvq->count[%x]\n", rcvq->count);
1546                                 dev_err(dev, "SKIP THIS SKB!!!!!!!!\n");
1547                                 goto retry_rcvqfill;
1548                         }
1549 #else
1550                         if (paddrl == 0) {
1551                                 dev_err(dev, "%s: LOW 32bits PHYSICAL ADDRESS == 0\n",
1552                                         __func__);
1553                                 dev_err(dev, "skb[%p] PROBLEM\n", skb);
1554                                 dev_err(dev, "         skbdata[%p]\n", skb->data);
1555                                 dev_err(dev, "         skblen[%x]\n", skb->len);
1556                                 dev_err(dev, "         paddr[%p]\n", paddr);
1557                                 dev_err(dev, "         paddrl[%x]\n", paddrl);
1558                                 dev_err(dev, "         paddrh[%x]\n", paddrh);
1559                                 dev_err(dev, "         rcvq->head[%p]\n", rcvq->head);
1560                                 dev_err(dev, "         rcvq->tail[%p]\n", rcvq->tail);
1561                                 dev_err(dev, "         rcvq->count[%x]\n", rcvq->count);
1562                                 dev_err(dev, "GIVE TO CARD ANYWAY\n");
1563                         }
1564 #endif
1565                         if (paddrh == 0) {
1566                                 slic_reg32_write(&adapter->slic_regs->slic_hbar,
1567                                                  (u32)paddrl, DONT_FLUSH);
1568                         } else {
1569                                 slic_reg64_write(adapter,
1570                                         &adapter->slic_regs->slic_hbar64,
1571                                         paddrl,
1572                                         &adapter->slic_regs->slic_addr_upper,
1573                                         paddrh, DONT_FLUSH);
1574                         }
1575                         if (rcvq->head)
1576                                 rcvq->tail->next = skb;
1577                         else
1578                                 rcvq->head = skb;
1579                         rcvq->tail = skb;
1580                         rcvq->count++;
1581                         i++;
1582                 } else {
1583                         dev_err(&adapter->netdev->dev,
1584                                 "slic_rcvqueue_fill could only get [%d] skbuffs\n",
1585                                 i);
1586                         break;
1587                 }
1588         }
1589         return i;
1590 }
1591
1592 static void slic_rcvqueue_free(struct adapter *adapter)
1593 {
1594         struct slic_rcvqueue *rcvq = &adapter->rcvqueue;
1595         struct sk_buff *skb;
1596
1597         while (rcvq->head) {
1598                 skb = rcvq->head;
1599                 rcvq->head = rcvq->head->next;
1600                 dev_kfree_skb(skb);
1601         }
1602         rcvq->tail = NULL;
1603         rcvq->head = NULL;
1604         rcvq->count = 0;
1605 }
1606
1607 static int slic_rcvqueue_init(struct adapter *adapter)
1608 {
1609         int i, count;
1610         struct slic_rcvqueue *rcvq = &adapter->rcvqueue;
1611
1612         rcvq->tail = NULL;
1613         rcvq->head = NULL;
1614         rcvq->size = SLIC_RCVQ_ENTRIES;
1615         rcvq->errors = 0;
1616         rcvq->count = 0;
1617         i = (SLIC_RCVQ_ENTRIES / SLIC_RCVQ_FILLENTRIES);
1618         count = 0;
1619         while (i) {
1620                 count += slic_rcvqueue_fill(adapter);
1621                 i--;
1622         }
1623         if (rcvq->count < SLIC_RCVQ_MINENTRIES) {
1624                 slic_rcvqueue_free(adapter);
1625                 return -ENOMEM;
1626         }
1627         return 0;
1628 }
1629
1630 static struct sk_buff *slic_rcvqueue_getnext(struct adapter *adapter)
1631 {
1632         struct slic_rcvqueue *rcvq = &adapter->rcvqueue;
1633         struct sk_buff *skb;
1634         struct slic_rcvbuf *rcvbuf;
1635         int count;
1636
1637         if (rcvq->count) {
1638                 skb = rcvq->head;
1639                 rcvbuf = (struct slic_rcvbuf *)skb->head;
1640
1641                 if (rcvbuf->status & IRHDDR_SVALID) {
1642                         rcvq->head = rcvq->head->next;
1643                         skb->next = NULL;
1644                         rcvq->count--;
1645                 } else {
1646                         skb = NULL;
1647                 }
1648         } else {
1649                 dev_err(&adapter->netdev->dev,
1650                         "RcvQ Empty!! rcvq[%p] count[%x]\n", rcvq, rcvq->count);
1651                 skb = NULL;
1652         }
1653         while (rcvq->count < SLIC_RCVQ_FILLTHRESH) {
1654                 count = slic_rcvqueue_fill(adapter);
1655                 if (!count)
1656                         break;
1657         }
1658         if (skb)
1659                 rcvq->errors = 0;
1660         return skb;
1661 }
1662
1663 static u32 slic_rcvqueue_reinsert(struct adapter *adapter, struct sk_buff *skb)
1664 {
1665         struct slic_rcvqueue *rcvq = &adapter->rcvqueue;
1666         void *paddr;
1667         u32 paddrl;
1668         u32 paddrh;
1669         struct slic_rcvbuf *rcvbuf = (struct slic_rcvbuf *)skb->head;
1670         struct device *dev;
1671
1672         paddr = (void *)(unsigned long)
1673                 pci_map_single(adapter->pcidev, skb->head,
1674                                SLIC_RCVQ_RCVBUFSIZE, PCI_DMA_FROMDEVICE);
1675         rcvbuf->status = 0;
1676         skb->next = NULL;
1677
1678         paddrl = SLIC_GET_ADDR_LOW(paddr);
1679         paddrh = SLIC_GET_ADDR_HIGH(paddr);
1680
1681         if (paddrl == 0) {
1682                 dev = &adapter->netdev->dev;
1683                 dev_err(dev, "%s: LOW 32bits PHYSICAL ADDRESS == 0\n",
1684                         __func__);
1685                 dev_err(dev, "skb[%p] PROBLEM\n", skb);
1686                 dev_err(dev, "         skbdata[%p]\n", skb->data);
1687                 dev_err(dev, "         skblen[%x]\n", skb->len);
1688                 dev_err(dev, "         paddr[%p]\n", paddr);
1689                 dev_err(dev, "         paddrl[%x]\n", paddrl);
1690                 dev_err(dev, "         paddrh[%x]\n", paddrh);
1691                 dev_err(dev, "         rcvq->head[%p]\n", rcvq->head);
1692                 dev_err(dev, "         rcvq->tail[%p]\n", rcvq->tail);
1693                 dev_err(dev, "         rcvq->count[%x]\n", rcvq->count);
1694         }
1695         if (paddrh == 0) {
1696                 slic_reg32_write(&adapter->slic_regs->slic_hbar, (u32)paddrl,
1697                                  DONT_FLUSH);
1698         } else {
1699                 slic_reg64_write(adapter, &adapter->slic_regs->slic_hbar64,
1700                                  paddrl, &adapter->slic_regs->slic_addr_upper,
1701                                  paddrh, DONT_FLUSH);
1702         }
1703         if (rcvq->head)
1704                 rcvq->tail->next = skb;
1705         else
1706                 rcvq->head = skb;
1707         rcvq->tail = skb;
1708         rcvq->count++;
1709         return rcvq->count;
1710 }
1711
1712 /*
1713  * slic_link_event_handler -
1714  *
1715  * Initiate a link configuration sequence.  The link configuration begins
1716  * by issuing a READ_LINK_STATUS command to the Utility Processor on the
1717  * SLIC.  Since the command finishes asynchronously, the slic_upr_comlete
1718  * routine will follow it up witha UP configuration write command, which
1719  * will also complete asynchronously.
1720  *
1721  */
1722 static void slic_link_event_handler(struct adapter *adapter)
1723 {
1724         int status;
1725         struct slic_shmem *pshmem;
1726
1727         if (adapter->state != ADAPT_UP) {
1728                 /* Adapter is not operational.  Ignore.  */
1729                 return;
1730         }
1731
1732         pshmem = (struct slic_shmem *)(unsigned long)adapter->phys_shmem;
1733
1734 #if BITS_PER_LONG == 64
1735         status = slic_upr_request(adapter,
1736                                   SLIC_UPR_RLSR,
1737                                   SLIC_GET_ADDR_LOW(&pshmem->linkstatus),
1738                                   SLIC_GET_ADDR_HIGH(&pshmem->linkstatus),
1739                                   0, 0);
1740 #else
1741         status = slic_upr_request(adapter, SLIC_UPR_RLSR,
1742                 (u32) &pshmem->linkstatus,      /* no 4GB wrap guaranteed */
1743                                   0, 0, 0);
1744 #endif
1745 }
1746
1747 static void slic_init_cleanup(struct adapter *adapter)
1748 {
1749         if (adapter->intrregistered) {
1750                 adapter->intrregistered = 0;
1751                 free_irq(adapter->netdev->irq, adapter->netdev);
1752
1753         }
1754         if (adapter->pshmem) {
1755                 pci_free_consistent(adapter->pcidev,
1756                                     sizeof(struct slic_shmem),
1757                                     adapter->pshmem, adapter->phys_shmem);
1758                 adapter->pshmem = NULL;
1759                 adapter->phys_shmem = (dma_addr_t)(unsigned long)NULL;
1760         }
1761
1762         if (adapter->pingtimerset) {
1763                 adapter->pingtimerset = 0;
1764                 del_timer(&adapter->pingtimer);
1765         }
1766
1767         slic_rspqueue_free(adapter);
1768         slic_cmdq_free(adapter);
1769         slic_rcvqueue_free(adapter);
1770 }
1771
1772 /*
1773  *  Allocate a mcast_address structure to hold the multicast address.
1774  *  Link it in.
1775  */
1776 static int slic_mcast_add_list(struct adapter *adapter, char *address)
1777 {
1778         struct mcast_address *mcaddr, *mlist;
1779
1780         /* Check to see if it already exists */
1781         mlist = adapter->mcastaddrs;
1782         while (mlist) {
1783                 if (ether_addr_equal(mlist->address, address))
1784                         return 0;
1785                 mlist = mlist->next;
1786         }
1787
1788         /* Doesn't already exist.  Allocate a structure to hold it */
1789         mcaddr = kmalloc(sizeof(struct mcast_address), GFP_ATOMIC);
1790         if (mcaddr == NULL)
1791                 return 1;
1792
1793         memcpy(mcaddr->address, address, ETH_ALEN);
1794
1795         mcaddr->next = adapter->mcastaddrs;
1796         adapter->mcastaddrs = mcaddr;
1797
1798         return 0;
1799 }
1800
1801 static void slic_mcast_set_list(struct net_device *dev)
1802 {
1803         struct adapter *adapter = netdev_priv(dev);
1804         int status = 0;
1805         char *addresses;
1806         struct netdev_hw_addr *ha;
1807
1808         netdev_for_each_mc_addr(ha, dev) {
1809                 addresses = (char *) &ha->addr;
1810                 status = slic_mcast_add_list(adapter, addresses);
1811                 if (status != 0)
1812                         break;
1813                 slic_mcast_set_bit(adapter, addresses);
1814         }
1815
1816         if (adapter->devflags_prev != dev->flags) {
1817                 adapter->macopts = MAC_DIRECTED;
1818                 if (dev->flags) {
1819                         if (dev->flags & IFF_BROADCAST)
1820                                 adapter->macopts |= MAC_BCAST;
1821                         if (dev->flags & IFF_PROMISC)
1822                                 adapter->macopts |= MAC_PROMISC;
1823                         if (dev->flags & IFF_ALLMULTI)
1824                                 adapter->macopts |= MAC_ALLMCAST;
1825                         if (dev->flags & IFF_MULTICAST)
1826                                 adapter->macopts |= MAC_MCAST;
1827                 }
1828                 adapter->devflags_prev = dev->flags;
1829                 slic_config_set(adapter, true);
1830         } else {
1831                 if (status == 0)
1832                         slic_mcast_set_mask(adapter);
1833         }
1834 }
1835
1836 #define  XMIT_FAIL_LINK_STATE               1
1837 #define  XMIT_FAIL_ZERO_LENGTH              2
1838 #define  XMIT_FAIL_HOSTCMD_FAIL             3
1839
1840 static void slic_xmit_build_request(struct adapter *adapter,
1841                              struct slic_hostcmd *hcmd, struct sk_buff *skb)
1842 {
1843         struct slic_host64_cmd *ihcmd;
1844         ulong phys_addr;
1845
1846         ihcmd = &hcmd->cmd64;
1847
1848         ihcmd->flags = (adapter->port << IHFLG_IFSHFT);
1849         ihcmd->command = IHCMD_XMT_REQ;
1850         ihcmd->u.slic_buffers.totlen = skb->len;
1851         phys_addr = pci_map_single(adapter->pcidev, skb->data, skb->len,
1852                         PCI_DMA_TODEVICE);
1853         ihcmd->u.slic_buffers.bufs[0].paddrl = SLIC_GET_ADDR_LOW(phys_addr);
1854         ihcmd->u.slic_buffers.bufs[0].paddrh = SLIC_GET_ADDR_HIGH(phys_addr);
1855         ihcmd->u.slic_buffers.bufs[0].length = skb->len;
1856 #if BITS_PER_LONG == 64
1857         hcmd->cmdsize = (u32) ((((u64)&ihcmd->u.slic_buffers.bufs[1] -
1858                                      (u64) hcmd) + 31) >> 5);
1859 #else
1860         hcmd->cmdsize = ((((u32) &ihcmd->u.slic_buffers.bufs[1] -
1861                            (u32) hcmd) + 31) >> 5);
1862 #endif
1863 }
1864
1865 static void slic_xmit_fail(struct adapter *adapter,
1866                     struct sk_buff *skb,
1867                     void *cmd, u32 skbtype, u32 status)
1868 {
1869         if (adapter->xmitq_full)
1870                 netif_stop_queue(adapter->netdev);
1871         if ((cmd == NULL) && (status <= XMIT_FAIL_HOSTCMD_FAIL)) {
1872                 switch (status) {
1873                 case XMIT_FAIL_LINK_STATE:
1874                         dev_err(&adapter->netdev->dev,
1875                                 "reject xmit skb[%p: %x] linkstate[%s] adapter[%s:%d] card[%s:%d]\n",
1876                                 skb, skb->pkt_type,
1877                                 SLIC_LINKSTATE(adapter->linkstate),
1878                                 SLIC_ADAPTER_STATE(adapter->state),
1879                                 adapter->state,
1880                                 SLIC_CARD_STATE(adapter->card->state),
1881                                 adapter->card->state);
1882                         break;
1883                 case XMIT_FAIL_ZERO_LENGTH:
1884                         dev_err(&adapter->netdev->dev,
1885                                 "xmit_start skb->len == 0 skb[%p] type[%x]\n",
1886                                 skb, skb->pkt_type);
1887                         break;
1888                 case XMIT_FAIL_HOSTCMD_FAIL:
1889                         dev_err(&adapter->netdev->dev,
1890                                 "xmit_start skb[%p] type[%x] No host commands available\n", skb, skb->pkt_type);
1891                         break;
1892                 }
1893         }
1894         dev_kfree_skb(skb);
1895         adapter->netdev->stats.tx_dropped++;
1896 }
1897
1898 static void slic_rcv_handle_error(struct adapter *adapter,
1899                                         struct slic_rcvbuf *rcvbuf)
1900 {
1901         struct slic_hddr_wds *hdr = (struct slic_hddr_wds *)rcvbuf->data;
1902         struct net_device *netdev = adapter->netdev;
1903
1904         if (adapter->devid != SLIC_1GB_DEVICE_ID) {
1905                 if (hdr->frame_status14 & VRHSTAT_802OE)
1906                         adapter->if_events.oflow802++;
1907                 if (hdr->frame_status14 & VRHSTAT_TPOFLO)
1908                         adapter->if_events.Tprtoflow++;
1909                 if (hdr->frame_status_b14 & VRHSTATB_802UE)
1910                         adapter->if_events.uflow802++;
1911                 if (hdr->frame_status_b14 & VRHSTATB_RCVE) {
1912                         adapter->if_events.rcvearly++;
1913                         netdev->stats.rx_fifo_errors++;
1914                 }
1915                 if (hdr->frame_status_b14 & VRHSTATB_BUFF) {
1916                         adapter->if_events.Bufov++;
1917                         netdev->stats.rx_over_errors++;
1918                 }
1919                 if (hdr->frame_status_b14 & VRHSTATB_CARRE) {
1920                         adapter->if_events.Carre++;
1921                         netdev->stats.tx_carrier_errors++;
1922                 }
1923                 if (hdr->frame_status_b14 & VRHSTATB_LONGE)
1924                         adapter->if_events.Longe++;
1925                 if (hdr->frame_status_b14 & VRHSTATB_PREA)
1926                         adapter->if_events.Invp++;
1927                 if (hdr->frame_status_b14 & VRHSTATB_CRC) {
1928                         adapter->if_events.Crc++;
1929                         netdev->stats.rx_crc_errors++;
1930                 }
1931                 if (hdr->frame_status_b14 & VRHSTATB_DRBL)
1932                         adapter->if_events.Drbl++;
1933                 if (hdr->frame_status_b14 & VRHSTATB_CODE)
1934                         adapter->if_events.Code++;
1935                 if (hdr->frame_status_b14 & VRHSTATB_TPCSUM)
1936                         adapter->if_events.TpCsum++;
1937                 if (hdr->frame_status_b14 & VRHSTATB_TPHLEN)
1938                         adapter->if_events.TpHlen++;
1939                 if (hdr->frame_status_b14 & VRHSTATB_IPCSUM)
1940                         adapter->if_events.IpCsum++;
1941                 if (hdr->frame_status_b14 & VRHSTATB_IPLERR)
1942                         adapter->if_events.IpLen++;
1943                 if (hdr->frame_status_b14 & VRHSTATB_IPHERR)
1944                         adapter->if_events.IpHlen++;
1945         } else {
1946                 if (hdr->frame_statusGB & VGBSTAT_XPERR) {
1947                         u32 xerr = hdr->frame_statusGB >> VGBSTAT_XERRSHFT;
1948
1949                         if (xerr == VGBSTAT_XCSERR)
1950                                 adapter->if_events.TpCsum++;
1951                         if (xerr == VGBSTAT_XUFLOW)
1952                                 adapter->if_events.Tprtoflow++;
1953                         if (xerr == VGBSTAT_XHLEN)
1954                                 adapter->if_events.TpHlen++;
1955                 }
1956                 if (hdr->frame_statusGB & VGBSTAT_NETERR) {
1957                         u32 nerr =
1958                             (hdr->
1959                              frame_statusGB >> VGBSTAT_NERRSHFT) &
1960                             VGBSTAT_NERRMSK;
1961                         if (nerr == VGBSTAT_NCSERR)
1962                                 adapter->if_events.IpCsum++;
1963                         if (nerr == VGBSTAT_NUFLOW)
1964                                 adapter->if_events.IpLen++;
1965                         if (nerr == VGBSTAT_NHLEN)
1966                                 adapter->if_events.IpHlen++;
1967                 }
1968                 if (hdr->frame_statusGB & VGBSTAT_LNKERR) {
1969                         u32 lerr = hdr->frame_statusGB & VGBSTAT_LERRMSK;
1970
1971                         if (lerr == VGBSTAT_LDEARLY)
1972                                 adapter->if_events.rcvearly++;
1973                         if (lerr == VGBSTAT_LBOFLO)
1974                                 adapter->if_events.Bufov++;
1975                         if (lerr == VGBSTAT_LCODERR)
1976                                 adapter->if_events.Code++;
1977                         if (lerr == VGBSTAT_LDBLNBL)
1978                                 adapter->if_events.Drbl++;
1979                         if (lerr == VGBSTAT_LCRCERR)
1980                                 adapter->if_events.Crc++;
1981                         if (lerr == VGBSTAT_LOFLO)
1982                                 adapter->if_events.oflow802++;
1983                         if (lerr == VGBSTAT_LUFLO)
1984                                 adapter->if_events.uflow802++;
1985                 }
1986         }
1987         return;
1988 }
1989
1990 #define TCP_OFFLOAD_FRAME_PUSHFLAG  0x10000000
1991 #define M_FAST_PATH                 0x0040
1992
1993 static void slic_rcv_handler(struct adapter *adapter)
1994 {
1995         struct net_device *netdev = adapter->netdev;
1996         struct sk_buff *skb;
1997         struct slic_rcvbuf *rcvbuf;
1998         u32 frames = 0;
1999
2000         while ((skb = slic_rcvqueue_getnext(adapter))) {
2001                 u32 rx_bytes;
2002
2003                 rcvbuf = (struct slic_rcvbuf *)skb->head;
2004                 adapter->card->events++;
2005                 if (rcvbuf->status & IRHDDR_ERR) {
2006                         adapter->rx_errors++;
2007                         slic_rcv_handle_error(adapter, rcvbuf);
2008                         slic_rcvqueue_reinsert(adapter, skb);
2009                         continue;
2010                 }
2011
2012                 if (!slic_mac_filter(adapter, (struct ether_header *)
2013                                         rcvbuf->data)) {
2014                         slic_rcvqueue_reinsert(adapter, skb);
2015                         continue;
2016                 }
2017                 skb_pull(skb, SLIC_RCVBUF_HEADSIZE);
2018                 rx_bytes = (rcvbuf->length & IRHDDR_FLEN_MSK);
2019                 skb_put(skb, rx_bytes);
2020                 netdev->stats.rx_packets++;
2021                 netdev->stats.rx_bytes += rx_bytes;
2022 #if SLIC_OFFLOAD_IP_CHECKSUM
2023                 skb->ip_summed = CHECKSUM_UNNECESSARY;
2024 #endif
2025
2026                 skb->dev = adapter->netdev;
2027                 skb->protocol = eth_type_trans(skb, skb->dev);
2028                 netif_rx(skb);
2029
2030                 ++frames;
2031 #if SLIC_INTERRUPT_PROCESS_LIMIT
2032                 if (frames >= SLIC_RCVQ_MAX_PROCESS_ISR) {
2033                         adapter->rcv_interrupt_yields++;
2034                         break;
2035                 }
2036 #endif
2037         }
2038         adapter->max_isr_rcvs = max(adapter->max_isr_rcvs, frames);
2039 }
2040
2041 static void slic_xmit_complete(struct adapter *adapter)
2042 {
2043         struct slic_hostcmd *hcmd;
2044         struct slic_rspbuf *rspbuf;
2045         u32 frames = 0;
2046         struct slic_handle_word slic_handle_word;
2047
2048         do {
2049                 rspbuf = slic_rspqueue_getnext(adapter);
2050                 if (!rspbuf)
2051                         break;
2052                 adapter->xmit_completes++;
2053                 adapter->card->events++;
2054                 /*
2055                  Get the complete host command buffer
2056                 */
2057                 slic_handle_word.handle_token = rspbuf->hosthandle;
2058                 hcmd =
2059                     (struct slic_hostcmd *)
2060                         adapter->slic_handles[slic_handle_word.handle_index].
2061                                                                         address;
2062 /*      hcmd = (struct slic_hostcmd *) rspbuf->hosthandle; */
2063                 if (hcmd->type == SLIC_CMD_DUMB) {
2064                         if (hcmd->skb)
2065                                 dev_kfree_skb_irq(hcmd->skb);
2066                         slic_cmdq_putdone_irq(adapter, hcmd);
2067                 }
2068                 rspbuf->status = 0;
2069                 rspbuf->hosthandle = 0;
2070                 frames++;
2071         } while (1);
2072         adapter->max_isr_xmits = max(adapter->max_isr_xmits, frames);
2073 }
2074
2075 static void slic_interrupt_card_up(u32 isr, struct adapter *adapter,
2076                         struct net_device *dev)
2077 {
2078         if (isr & ~ISR_IO) {
2079                 if (isr & ISR_ERR) {
2080                         adapter->error_interrupts++;
2081                         if (isr & ISR_RMISS) {
2082                                 int count;
2083                                 int pre_count;
2084                                 int errors;
2085
2086                                 struct slic_rcvqueue *rcvq =
2087                                         &adapter->rcvqueue;
2088
2089                                 adapter->error_rmiss_interrupts++;
2090
2091                                 if (!rcvq->errors)
2092                                         rcv_count = rcvq->count;
2093                                 pre_count = rcvq->count;
2094                                 errors = rcvq->errors;
2095
2096                                 while (rcvq->count < SLIC_RCVQ_FILLTHRESH) {
2097                                         count = slic_rcvqueue_fill(adapter);
2098                                         if (!count)
2099                                                 break;
2100                                 }
2101                         } else if (isr & ISR_XDROP) {
2102                                 dev_err(&dev->dev,
2103                                                 "isr & ISR_ERR [%x] ISR_XDROP\n", isr);
2104                         } else {
2105                                 dev_err(&dev->dev,
2106                                                 "isr & ISR_ERR [%x]\n",
2107                                                 isr);
2108                         }
2109                 }
2110
2111                 if (isr & ISR_LEVENT) {
2112                         adapter->linkevent_interrupts++;
2113                         slic_link_event_handler(adapter);
2114                 }
2115
2116                 if ((isr & ISR_UPC) || (isr & ISR_UPCERR) ||
2117                     (isr & ISR_UPCBSY)) {
2118                         adapter->upr_interrupts++;
2119                         slic_upr_request_complete(adapter, isr);
2120                 }
2121         }
2122
2123         if (isr & ISR_RCV) {
2124                 adapter->rcv_interrupts++;
2125                 slic_rcv_handler(adapter);
2126         }
2127
2128         if (isr & ISR_CMD) {
2129                 adapter->xmit_interrupts++;
2130                 slic_xmit_complete(adapter);
2131         }
2132 }
2133
2134
2135 static irqreturn_t slic_interrupt(int irq, void *dev_id)
2136 {
2137         struct net_device *dev = (struct net_device *)dev_id;
2138         struct adapter *adapter = netdev_priv(dev);
2139         u32 isr;
2140
2141         if ((adapter->pshmem) && (adapter->pshmem->isr)) {
2142                 slic_reg32_write(&adapter->slic_regs->slic_icr,
2143                                  ICR_INT_MASK, FLUSH);
2144                 isr = adapter->isrcopy = adapter->pshmem->isr;
2145                 adapter->pshmem->isr = 0;
2146                 adapter->num_isrs++;
2147                 switch (adapter->card->state) {
2148                 case CARD_UP:
2149                         slic_interrupt_card_up(isr, adapter, dev);
2150                         break;
2151
2152                 case CARD_DOWN:
2153                         if ((isr & ISR_UPC) ||
2154                             (isr & ISR_UPCERR) || (isr & ISR_UPCBSY)) {
2155                                 adapter->upr_interrupts++;
2156                                 slic_upr_request_complete(adapter, isr);
2157                         }
2158                         break;
2159                 }
2160
2161                 adapter->isrcopy = 0;
2162                 adapter->all_reg_writes += 2;
2163                 adapter->isr_reg_writes++;
2164                 slic_reg32_write(&adapter->slic_regs->slic_isr, 0, FLUSH);
2165         } else {
2166                 adapter->false_interrupts++;
2167         }
2168         return IRQ_HANDLED;
2169 }
2170
2171 #define NORMAL_ETHFRAME     0
2172
2173 static netdev_tx_t slic_xmit_start(struct sk_buff *skb, struct net_device *dev)
2174 {
2175         struct sliccard *card;
2176         struct adapter *adapter = netdev_priv(dev);
2177         struct slic_hostcmd *hcmd = NULL;
2178         u32 status = 0;
2179         void *offloadcmd = NULL;
2180
2181         card = adapter->card;
2182         if ((adapter->linkstate != LINK_UP) ||
2183             (adapter->state != ADAPT_UP) || (card->state != CARD_UP)) {
2184                 status = XMIT_FAIL_LINK_STATE;
2185                 goto xmit_fail;
2186
2187         } else if (skb->len == 0) {
2188                 status = XMIT_FAIL_ZERO_LENGTH;
2189                 goto xmit_fail;
2190         }
2191
2192         hcmd = slic_cmdq_getfree(adapter);
2193         if (!hcmd) {
2194                 adapter->xmitq_full = 1;
2195                 status = XMIT_FAIL_HOSTCMD_FAIL;
2196                 goto xmit_fail;
2197         }
2198         hcmd->skb = skb;
2199         hcmd->busy = 1;
2200         hcmd->type = SLIC_CMD_DUMB;
2201         slic_xmit_build_request(adapter, hcmd, skb);
2202         dev->stats.tx_packets++;
2203         dev->stats.tx_bytes += skb->len;
2204
2205 #ifdef DEBUG_DUMP
2206         if (adapter->kill_card) {
2207                 struct slic_host64_cmd ihcmd;
2208
2209                 ihcmd = &hcmd->cmd64;
2210
2211                 ihcmd->flags |= 0x40;
2212                 adapter->kill_card = 0; /* only do this once */
2213         }
2214 #endif
2215         if (hcmd->paddrh == 0) {
2216                 slic_reg32_write(&adapter->slic_regs->slic_cbar,
2217                                  (hcmd->paddrl | hcmd->cmdsize), DONT_FLUSH);
2218         } else {
2219                 slic_reg64_write(adapter, &adapter->slic_regs->slic_cbar64,
2220                                  (hcmd->paddrl | hcmd->cmdsize),
2221                                  &adapter->slic_regs->slic_addr_upper,
2222                                  hcmd->paddrh, DONT_FLUSH);
2223         }
2224 xmit_done:
2225         return NETDEV_TX_OK;
2226 xmit_fail:
2227         slic_xmit_fail(adapter, skb, offloadcmd, NORMAL_ETHFRAME, status);
2228         goto xmit_done;
2229 }
2230
2231
2232 static void slic_adapter_freeresources(struct adapter *adapter)
2233 {
2234         slic_init_cleanup(adapter);
2235         adapter->error_interrupts = 0;
2236         adapter->rcv_interrupts = 0;
2237         adapter->xmit_interrupts = 0;
2238         adapter->linkevent_interrupts = 0;
2239         adapter->upr_interrupts = 0;
2240         adapter->num_isrs = 0;
2241         adapter->xmit_completes = 0;
2242         adapter->rcv_broadcasts = 0;
2243         adapter->rcv_multicasts = 0;
2244         adapter->rcv_unicasts = 0;
2245 }
2246
2247 static int slic_adapter_allocresources(struct adapter *adapter)
2248 {
2249         if (!adapter->intrregistered) {
2250                 int retval;
2251
2252                 spin_unlock_irqrestore(&slic_global.driver_lock.lock,
2253                                         slic_global.driver_lock.flags);
2254
2255                 retval = request_irq(adapter->netdev->irq,
2256                                      &slic_interrupt,
2257                                      IRQF_SHARED,
2258                                      adapter->netdev->name, adapter->netdev);
2259
2260                 spin_lock_irqsave(&slic_global.driver_lock.lock,
2261                                         slic_global.driver_lock.flags);
2262
2263                 if (retval) {
2264                         dev_err(&adapter->netdev->dev,
2265                                 "request_irq (%s) FAILED [%x]\n",
2266                                 adapter->netdev->name, retval);
2267                         return retval;
2268                 }
2269                 adapter->intrregistered = 1;
2270         }
2271         return 0;
2272 }
2273
2274 /*
2275  *  slic_if_init
2276  *
2277  *  Perform initialization of our slic interface.
2278  *
2279  */
2280 static int slic_if_init(struct adapter *adapter)
2281 {
2282         struct sliccard *card = adapter->card;
2283         struct net_device *dev = adapter->netdev;
2284         __iomem struct slic_regs *slic_regs = adapter->slic_regs;
2285         struct slic_shmem *pshmem;
2286         int rc;
2287
2288         /* adapter should be down at this point */
2289         if (adapter->state != ADAPT_DOWN) {
2290                 dev_err(&dev->dev, "%s: adapter->state != ADAPT_DOWN\n",
2291                         __func__);
2292                 rc = -EIO;
2293                 goto err;
2294         }
2295
2296         adapter->devflags_prev = dev->flags;
2297         adapter->macopts = MAC_DIRECTED;
2298         if (dev->flags) {
2299                 if (dev->flags & IFF_BROADCAST)
2300                         adapter->macopts |= MAC_BCAST;
2301                 if (dev->flags & IFF_PROMISC)
2302                         adapter->macopts |= MAC_PROMISC;
2303                 if (dev->flags & IFF_ALLMULTI)
2304                         adapter->macopts |= MAC_ALLMCAST;
2305                 if (dev->flags & IFF_MULTICAST)
2306                         adapter->macopts |= MAC_MCAST;
2307         }
2308         rc = slic_adapter_allocresources(adapter);
2309         if (rc) {
2310                 dev_err(&dev->dev,
2311                         "%s: slic_adapter_allocresources FAILED %x\n",
2312                         __func__, rc);
2313                 slic_adapter_freeresources(adapter);
2314                 goto err;
2315         }
2316
2317         if (!adapter->queues_initialized) {
2318                 rc = slic_rspqueue_init(adapter);
2319                 if (rc)
2320                         goto err;
2321                 rc = slic_cmdq_init(adapter);
2322                 if (rc)
2323                         goto err;
2324                 rc = slic_rcvqueue_init(adapter);
2325                 if (rc)
2326                         goto err;
2327                 adapter->queues_initialized = 1;
2328         }
2329
2330         slic_reg32_write(&slic_regs->slic_icr, ICR_INT_OFF, FLUSH);
2331         mdelay(1);
2332
2333         if (!adapter->isp_initialized) {
2334                 pshmem = (struct slic_shmem *)(unsigned long)
2335                          adapter->phys_shmem;
2336
2337                 spin_lock_irqsave(&adapter->bit64reglock.lock,
2338                                         adapter->bit64reglock.flags);
2339
2340 #if BITS_PER_LONG == 64
2341                 slic_reg32_write(&slic_regs->slic_addr_upper,
2342                                  SLIC_GET_ADDR_HIGH(&pshmem->isr), DONT_FLUSH);
2343                 slic_reg32_write(&slic_regs->slic_isp,
2344                                  SLIC_GET_ADDR_LOW(&pshmem->isr), FLUSH);
2345 #else
2346                 slic_reg32_write(&slic_regs->slic_addr_upper, 0, DONT_FLUSH);
2347                 slic_reg32_write(&slic_regs->slic_isp, (u32)&pshmem->isr, FLUSH);
2348 #endif
2349                 spin_unlock_irqrestore(&adapter->bit64reglock.lock,
2350                                         adapter->bit64reglock.flags);
2351                 adapter->isp_initialized = 1;
2352         }
2353
2354         adapter->state = ADAPT_UP;
2355         if (!card->loadtimerset) {
2356                 init_timer(&card->loadtimer);
2357                 card->loadtimer.expires =
2358                     jiffies + (SLIC_LOADTIMER_PERIOD * HZ);
2359                 card->loadtimer.data = (ulong) card;
2360                 card->loadtimer.function = &slic_timer_load_check;
2361                 add_timer(&card->loadtimer);
2362
2363                 card->loadtimerset = 1;
2364         }
2365
2366         if (!adapter->pingtimerset) {
2367                 init_timer(&adapter->pingtimer);
2368                 adapter->pingtimer.expires =
2369                     jiffies + (PING_TIMER_INTERVAL * HZ);
2370                 adapter->pingtimer.data = (ulong) dev;
2371                 adapter->pingtimer.function = &slic_timer_ping;
2372                 add_timer(&adapter->pingtimer);
2373                 adapter->pingtimerset = 1;
2374                 adapter->card->pingstatus = ISR_PINGMASK;
2375         }
2376
2377         /*
2378          *    clear any pending events, then enable interrupts
2379          */
2380         adapter->isrcopy = 0;
2381         adapter->pshmem->isr = 0;
2382         slic_reg32_write(&slic_regs->slic_isr, 0, FLUSH);
2383         slic_reg32_write(&slic_regs->slic_icr, ICR_INT_ON, FLUSH);
2384
2385         slic_link_config(adapter, LINK_AUTOSPEED, LINK_AUTOD);
2386         slic_link_event_handler(adapter);
2387
2388 err:
2389         return rc;
2390 }
2391
2392 static int slic_entry_open(struct net_device *dev)
2393 {
2394         struct adapter *adapter = netdev_priv(dev);
2395         struct sliccard *card = adapter->card;
2396         int status;
2397
2398         netif_stop_queue(adapter->netdev);
2399
2400         spin_lock_irqsave(&slic_global.driver_lock.lock,
2401                                 slic_global.driver_lock.flags);
2402         if (!adapter->activated) {
2403                 card->adapters_activated++;
2404                 slic_global.num_slic_ports_active++;
2405                 adapter->activated = 1;
2406         }
2407         status = slic_if_init(adapter);
2408
2409         if (status != 0) {
2410                 if (adapter->activated) {
2411                         card->adapters_activated--;
2412                         slic_global.num_slic_ports_active--;
2413                         adapter->activated = 0;
2414                 }
2415                 goto spin_unlock;
2416         }
2417         if (!card->master)
2418                 card->master = adapter;
2419
2420 spin_unlock:
2421         spin_unlock_irqrestore(&slic_global.driver_lock.lock,
2422                                slic_global.driver_lock.flags);
2423         return status;
2424 }
2425
2426 static void slic_card_cleanup(struct sliccard *card)
2427 {
2428         if (card->loadtimerset) {
2429                 card->loadtimerset = 0;
2430                 del_timer_sync(&card->loadtimer);
2431         }
2432
2433         kfree(card);
2434 }
2435
2436 static void slic_entry_remove(struct pci_dev *pcidev)
2437 {
2438         struct net_device *dev = pci_get_drvdata(pcidev);
2439         struct adapter *adapter = netdev_priv(dev);
2440         struct sliccard *card;
2441         struct mcast_address *mcaddr, *mlist;
2442
2443         unregister_netdev(dev);
2444
2445         slic_adapter_freeresources(adapter);
2446         slic_unmap_mmio_space(adapter);
2447
2448         /* free multicast addresses */
2449         mlist = adapter->mcastaddrs;
2450         while (mlist) {
2451                 mcaddr = mlist;
2452                 mlist = mlist->next;
2453                 kfree(mcaddr);
2454         }
2455         card = adapter->card;
2456         card->adapters_allocated--;
2457         adapter->allocated = 0;
2458         if (!card->adapters_allocated) {
2459                 struct sliccard *curr_card = slic_global.slic_card;
2460                 if (curr_card == card) {
2461                         slic_global.slic_card = card->next;
2462                 } else {
2463                         while (curr_card->next != card)
2464                                 curr_card = curr_card->next;
2465                         curr_card->next = card->next;
2466                 }
2467                 slic_global.num_slic_cards--;
2468                 slic_card_cleanup(card);
2469         }
2470         free_netdev(dev);
2471         pci_release_regions(pcidev);
2472         pci_disable_device(pcidev);
2473 }
2474
2475 static int slic_entry_halt(struct net_device *dev)
2476 {
2477         struct adapter *adapter = netdev_priv(dev);
2478         struct sliccard *card = adapter->card;
2479         __iomem struct slic_regs *slic_regs = adapter->slic_regs;
2480
2481         spin_lock_irqsave(&slic_global.driver_lock.lock,
2482                                 slic_global.driver_lock.flags);
2483         netif_stop_queue(adapter->netdev);
2484         adapter->state = ADAPT_DOWN;
2485         adapter->linkstate = LINK_DOWN;
2486         adapter->upr_list = NULL;
2487         adapter->upr_busy = 0;
2488         adapter->devflags_prev = 0;
2489         slic_reg32_write(&slic_regs->slic_icr, ICR_INT_OFF, FLUSH);
2490         adapter->all_reg_writes++;
2491         adapter->icr_reg_writes++;
2492         slic_config_clear(adapter);
2493         if (adapter->activated) {
2494                 card->adapters_activated--;
2495                 slic_global.num_slic_ports_active--;
2496                 adapter->activated = 0;
2497         }
2498 #ifdef AUTOMATIC_RESET
2499         slic_reg32_write(&slic_regs->slic_reset_iface, 0, FLUSH);
2500 #endif
2501         /*
2502          *  Reset the adapter's cmd queues
2503          */
2504         slic_cmdq_reset(adapter);
2505
2506 #ifdef AUTOMATIC_RESET
2507         if (!card->adapters_activated)
2508                 slic_card_init(card, adapter);
2509 #endif
2510
2511         spin_unlock_irqrestore(&slic_global.driver_lock.lock,
2512                                 slic_global.driver_lock.flags);
2513         return 0;
2514 }
2515
2516 static struct net_device_stats *slic_get_stats(struct net_device *dev)
2517 {
2518         struct adapter *adapter = netdev_priv(dev);
2519
2520         dev->stats.collisions = adapter->slic_stats.iface.xmit_collisions;
2521         dev->stats.rx_errors = adapter->slic_stats.iface.rcv_errors;
2522         dev->stats.tx_errors = adapter->slic_stats.iface.xmt_errors;
2523         dev->stats.rx_missed_errors = adapter->slic_stats.iface.rcv_discards;
2524         dev->stats.tx_heartbeat_errors = 0;
2525         dev->stats.tx_aborted_errors = 0;
2526         dev->stats.tx_window_errors = 0;
2527         dev->stats.tx_fifo_errors = 0;
2528         dev->stats.rx_frame_errors = 0;
2529         dev->stats.rx_length_errors = 0;
2530
2531         return &dev->stats;
2532 }
2533
2534 static int slic_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
2535 {
2536         struct adapter *adapter = netdev_priv(dev);
2537         struct ethtool_cmd edata;
2538         struct ethtool_cmd ecmd;
2539         u32 data[7];
2540         u32 intagg;
2541
2542         switch (cmd) {
2543         case SIOCSLICSETINTAGG:
2544                 if (copy_from_user(data, rq->ifr_data, 28))
2545                         return -EFAULT;
2546                 intagg = data[0];
2547                 dev_err(&dev->dev, "%s: set interrupt aggregation to %d\n",
2548                         __func__, intagg);
2549                 slic_intagg_set(adapter, intagg);
2550                 return 0;
2551
2552 #ifdef SLIC_TRACE_DUMP_ENABLED
2553         case SIOCSLICTRACEDUMP:
2554                 {
2555                         u32 value;
2556                         DBG_IOCTL("slic_ioctl  SIOCSLIC_TRACE_DUMP\n");
2557
2558                         if (copy_from_user(data, rq->ifr_data, 28)) {
2559                                 PRINT_ERROR
2560                                     ("slic: copy_from_user FAILED getting initial simba param\n");
2561                                 return -EFAULT;
2562                         }
2563
2564                         value = data[0];
2565                         if (tracemon_request == SLIC_DUMP_DONE) {
2566                                 PRINT_ERROR
2567                                     ("ATK Diagnostic Trace Dump Requested\n");
2568                                 tracemon_request = SLIC_DUMP_REQUESTED;
2569                                 tracemon_request_type = value;
2570                                 tracemon_timestamp = jiffies;
2571                         } else if ((tracemon_request == SLIC_DUMP_REQUESTED) ||
2572                                    (tracemon_request ==
2573                                     SLIC_DUMP_IN_PROGRESS)) {
2574                                 PRINT_ERROR
2575                                     ("ATK Diagnostic Trace Dump Requested but already in progress... ignore\n");
2576                         } else {
2577                                 PRINT_ERROR
2578                                     ("ATK Diagnostic Trace Dump Requested\n");
2579                                 tracemon_request = SLIC_DUMP_REQUESTED;
2580                                 tracemon_request_type = value;
2581                                 tracemon_timestamp = jiffies;
2582                         }
2583                         return 0;
2584                 }
2585 #endif
2586         case SIOCETHTOOL:
2587                 if (copy_from_user(&ecmd, rq->ifr_data, sizeof(ecmd)))
2588                         return -EFAULT;
2589
2590                 if (ecmd.cmd == ETHTOOL_GSET) {
2591                         memset(&edata, 0, sizeof(edata));
2592                         edata.supported = (SUPPORTED_10baseT_Half |
2593                                            SUPPORTED_10baseT_Full |
2594                                            SUPPORTED_100baseT_Half |
2595                                            SUPPORTED_100baseT_Full |
2596                                            SUPPORTED_Autoneg | SUPPORTED_MII);
2597                         edata.port = PORT_MII;
2598                         edata.transceiver = XCVR_INTERNAL;
2599                         edata.phy_address = 0;
2600                         if (adapter->linkspeed == LINK_100MB)
2601                                 edata.speed = SPEED_100;
2602                         else if (adapter->linkspeed == LINK_10MB)
2603                                 edata.speed = SPEED_10;
2604                         else
2605                                 edata.speed = 0;
2606
2607                         if (adapter->linkduplex == LINK_FULLD)
2608                                 edata.duplex = DUPLEX_FULL;
2609                         else
2610                                 edata.duplex = DUPLEX_HALF;
2611
2612                         edata.autoneg = AUTONEG_ENABLE;
2613                         edata.maxtxpkt = 1;
2614                         edata.maxrxpkt = 1;
2615                         if (copy_to_user(rq->ifr_data, &edata, sizeof(edata)))
2616                                 return -EFAULT;
2617
2618                 } else if (ecmd.cmd == ETHTOOL_SSET) {
2619                         if (!capable(CAP_NET_ADMIN))
2620                                 return -EPERM;
2621
2622                         if (adapter->linkspeed == LINK_100MB)
2623                                 edata.speed = SPEED_100;
2624                         else if (adapter->linkspeed == LINK_10MB)
2625                                 edata.speed = SPEED_10;
2626                         else
2627                                 edata.speed = 0;
2628
2629                         if (adapter->linkduplex == LINK_FULLD)
2630                                 edata.duplex = DUPLEX_FULL;
2631                         else
2632                                 edata.duplex = DUPLEX_HALF;
2633
2634                         edata.autoneg = AUTONEG_ENABLE;
2635                         edata.maxtxpkt = 1;
2636                         edata.maxrxpkt = 1;
2637                         if ((ecmd.speed != edata.speed) ||
2638                             (ecmd.duplex != edata.duplex)) {
2639                                 u32 speed;
2640                                 u32 duplex;
2641
2642                                 if (ecmd.speed == SPEED_10)
2643                                         speed = 0;
2644                                 else
2645                                         speed = PCR_SPEED_100;
2646                                 if (ecmd.duplex == DUPLEX_FULL)
2647                                         duplex = PCR_DUPLEX_FULL;
2648                                 else
2649                                         duplex = 0;
2650                                 slic_link_config(adapter, speed, duplex);
2651                                 slic_link_event_handler(adapter);
2652                         }
2653                 }
2654                 return 0;
2655         default:
2656                 return -EOPNOTSUPP;
2657         }
2658 }
2659
2660 static void slic_config_pci(struct pci_dev *pcidev)
2661 {
2662         u16 pci_command;
2663         u16 new_command;
2664
2665         pci_read_config_word(pcidev, PCI_COMMAND, &pci_command);
2666
2667         new_command = pci_command | PCI_COMMAND_MASTER
2668             | PCI_COMMAND_MEMORY
2669             | PCI_COMMAND_INVALIDATE
2670             | PCI_COMMAND_PARITY | PCI_COMMAND_SERR | PCI_COMMAND_FAST_BACK;
2671         if (pci_command != new_command)
2672                 pci_write_config_word(pcidev, PCI_COMMAND, new_command);
2673 }
2674
2675 static int slic_card_init(struct sliccard *card, struct adapter *adapter)
2676 {
2677         __iomem struct slic_regs *slic_regs = adapter->slic_regs;
2678         struct slic_eeprom *peeprom;
2679         struct oslic_eeprom *pOeeprom;
2680         dma_addr_t phys_config;
2681         u32 phys_configh;
2682         u32 phys_configl;
2683         u32 i = 0;
2684         struct slic_shmem *pshmem;
2685         int status;
2686         uint macaddrs = card->card_size;
2687         ushort eecodesize;
2688         ushort dramsize;
2689         ushort ee_chksum;
2690         ushort calc_chksum;
2691         struct slic_config_mac *pmac;
2692         unsigned char fruformat;
2693         unsigned char oemfruformat;
2694         struct atk_fru *patkfru;
2695         union oemfru *poemfru;
2696
2697         /* Reset everything except PCI configuration space */
2698         slic_soft_reset(adapter);
2699
2700         /* Download the microcode */
2701         status = slic_card_download(adapter);
2702         if (status)
2703                 return status;
2704
2705         if (!card->config_set) {
2706                 peeprom = pci_alloc_consistent(adapter->pcidev,
2707                                                sizeof(struct slic_eeprom),
2708                                                &phys_config);
2709
2710                 phys_configl = SLIC_GET_ADDR_LOW(phys_config);
2711                 phys_configh = SLIC_GET_ADDR_HIGH(phys_config);
2712
2713                 if (!peeprom) {
2714                         dev_err(&adapter->pcidev->dev,
2715                                 "Failed to allocate DMA memory for EEPROM.\n");
2716                         return -ENOMEM;
2717                 } else {
2718                         memset(peeprom, 0, sizeof(struct slic_eeprom));
2719                 }
2720                 slic_reg32_write(&slic_regs->slic_icr, ICR_INT_OFF, FLUSH);
2721                 mdelay(1);
2722                 pshmem = (struct slic_shmem *)(unsigned long)
2723                          adapter->phys_shmem;
2724
2725                 spin_lock_irqsave(&adapter->bit64reglock.lock,
2726                                         adapter->bit64reglock.flags);
2727                 slic_reg32_write(&slic_regs->slic_addr_upper,
2728                                  SLIC_GET_ADDR_HIGH(&pshmem->isr), DONT_FLUSH);
2729                 slic_reg32_write(&slic_regs->slic_isp,
2730                                  SLIC_GET_ADDR_LOW(&pshmem->isr), FLUSH);
2731                 spin_unlock_irqrestore(&adapter->bit64reglock.lock,
2732                                         adapter->bit64reglock.flags);
2733
2734                 status = slic_config_get(adapter, phys_configl, phys_configh);
2735                 if (status) {
2736                         dev_err(&adapter->pcidev->dev,
2737                                 "Failed to fetch config data from device.\n");
2738                         goto card_init_err;
2739                 }
2740
2741                 for (;;) {
2742                         if (adapter->pshmem->isr) {
2743                                 if (adapter->pshmem->isr & ISR_UPC) {
2744                                         adapter->pshmem->isr = 0;
2745                                         slic_reg64_write(adapter,
2746                                                 &slic_regs->slic_isp, 0,
2747                                                 &slic_regs->slic_addr_upper,
2748                                                 0, FLUSH);
2749                                         slic_reg32_write(&slic_regs->slic_isr,
2750                                                          0, FLUSH);
2751
2752                                         slic_upr_request_complete(adapter, 0);
2753                                         break;
2754                                 } else {
2755                                         adapter->pshmem->isr = 0;
2756                                         slic_reg32_write(&slic_regs->slic_isr,
2757                                                          0, FLUSH);
2758                                 }
2759                         } else {
2760                                 mdelay(1);
2761                                 i++;
2762                                 if (i > 5000) {
2763                                         dev_err(&adapter->pcidev->dev,
2764                                                 "Fetch of config data timed out.\n");
2765                                         slic_reg64_write(adapter,
2766                                                 &slic_regs->slic_isp, 0,
2767                                                 &slic_regs->slic_addr_upper,
2768                                                 0, FLUSH);
2769                                         status = -EINVAL;
2770                                         goto card_init_err;
2771                                 }
2772                         }
2773                 }
2774
2775                 switch (adapter->devid) {
2776                 /* Oasis card */
2777                 case SLIC_2GB_DEVICE_ID:
2778                         /* extract EEPROM data and pointers to EEPROM data */
2779                         pOeeprom = (struct oslic_eeprom *) peeprom;
2780                         eecodesize = pOeeprom->EecodeSize;
2781                         dramsize = pOeeprom->DramSize;
2782                         pmac = pOeeprom->MacInfo;
2783                         fruformat = pOeeprom->FruFormat;
2784                         patkfru = &pOeeprom->AtkFru;
2785                         oemfruformat = pOeeprom->OemFruFormat;
2786                         poemfru = &pOeeprom->OemFru;
2787                         macaddrs = 2;
2788                         /* Minor kludge for Oasis card
2789                              get 2 MAC addresses from the
2790                              EEPROM to ensure that function 1
2791                              gets the Port 1 MAC address */
2792                         break;
2793                 default:
2794                         /* extract EEPROM data and pointers to EEPROM data */
2795                         eecodesize = peeprom->EecodeSize;
2796                         dramsize = peeprom->DramSize;
2797                         pmac = peeprom->u2.mac.MacInfo;
2798                         fruformat = peeprom->FruFormat;
2799                         patkfru = &peeprom->AtkFru;
2800                         oemfruformat = peeprom->OemFruFormat;
2801                         poemfru = &peeprom->OemFru;
2802                         break;
2803                 }
2804
2805                 card->config.EepromValid = false;
2806
2807                 /*  see if the EEPROM is valid by checking it's checksum */
2808                 if ((eecodesize <= MAX_EECODE_SIZE) &&
2809                     (eecodesize >= MIN_EECODE_SIZE)) {
2810
2811                         ee_chksum =
2812                             *(u16 *) ((char *) peeprom + (eecodesize - 2));
2813                         /*
2814                             calculate the EEPROM checksum
2815                         */
2816                         calc_chksum = slic_eeprom_cksum(peeprom,
2817                                                         eecodesize - 2);
2818                         /*
2819                             if the ucdoe chksum flag bit worked,
2820                             we wouldn't need this
2821                         */
2822                         if (ee_chksum == calc_chksum)
2823                                 card->config.EepromValid = true;
2824                 }
2825                 /*  copy in the DRAM size */
2826                 card->config.DramSize = dramsize;
2827
2828                 /*  copy in the MAC address(es) */
2829                 for (i = 0; i < macaddrs; i++) {
2830                         memcpy(&card->config.MacInfo[i],
2831                                &pmac[i], sizeof(struct slic_config_mac));
2832                 }
2833
2834                 /*  copy the Alacritech FRU information */
2835                 card->config.FruFormat = fruformat;
2836                 memcpy(&card->config.AtkFru, patkfru,
2837                                                 sizeof(struct atk_fru));
2838
2839                 pci_free_consistent(adapter->pcidev,
2840                                     sizeof(struct slic_eeprom),
2841                                     peeprom, phys_config);
2842
2843                 if (!card->config.EepromValid) {
2844                         slic_reg64_write(adapter, &slic_regs->slic_isp, 0,
2845                                          &slic_regs->slic_addr_upper,
2846                                          0, FLUSH);
2847                         dev_err(&adapter->pcidev->dev, "EEPROM invalid.\n");
2848                         return -EINVAL;
2849                 }
2850
2851                 card->config_set = 1;
2852         }
2853
2854         status = slic_card_download_gbrcv(adapter);
2855         if (status)
2856                 return status;
2857
2858         if (slic_global.dynamic_intagg)
2859                 slic_intagg_set(adapter, 0);
2860         else
2861                 slic_intagg_set(adapter, intagg_delay);
2862
2863         /*
2864          *  Initialize ping status to "ok"
2865          */
2866         card->pingstatus = ISR_PINGMASK;
2867
2868         /*
2869          * Lastly, mark our card state as up and return success
2870          */
2871         card->state = CARD_UP;
2872         card->reset_in_progress = 0;
2873
2874         return 0;
2875
2876 card_init_err:
2877         pci_free_consistent(adapter->pcidev, sizeof(struct slic_eeprom),
2878                             peeprom, phys_config);
2879         return status;
2880 }
2881
2882 static void slic_init_driver(void)
2883 {
2884         if (slic_first_init) {
2885                 slic_first_init = 0;
2886                 spin_lock_init(&slic_global.driver_lock.lock);
2887         }
2888 }
2889
2890 static void slic_init_adapter(struct net_device *netdev,
2891                               struct pci_dev *pcidev,
2892                               const struct pci_device_id *pci_tbl_entry,
2893                               void __iomem *memaddr, int chip_idx)
2894 {
2895         ushort index;
2896         struct slic_handle *pslic_handle;
2897         struct adapter *adapter = netdev_priv(netdev);
2898
2899 /*      adapter->pcidev = pcidev;*/
2900         adapter->vendid = pci_tbl_entry->vendor;
2901         adapter->devid = pci_tbl_entry->device;
2902         adapter->subsysid = pci_tbl_entry->subdevice;
2903         adapter->busnumber = pcidev->bus->number;
2904         adapter->slotnumber = ((pcidev->devfn >> 3) & 0x1F);
2905         adapter->functionnumber = (pcidev->devfn & 0x7);
2906         adapter->slic_regs = (__iomem struct slic_regs *)memaddr;
2907         adapter->irq = pcidev->irq;
2908 /*      adapter->netdev = netdev;*/
2909         adapter->chipid = chip_idx;
2910         adapter->port = 0;      /*adapter->functionnumber;*/
2911         adapter->cardindex = adapter->port;
2912         spin_lock_init(&adapter->upr_lock.lock);
2913         spin_lock_init(&adapter->bit64reglock.lock);
2914         spin_lock_init(&adapter->adapter_lock.lock);
2915         spin_lock_init(&adapter->reset_lock.lock);
2916         spin_lock_init(&adapter->handle_lock.lock);
2917
2918         adapter->card_size = 1;
2919         /*
2920           Initialize slic_handle array
2921         */
2922         /*
2923          Start with 1.  0 is an invalid host handle.
2924         */
2925         for (index = 1, pslic_handle = &adapter->slic_handles[1];
2926              index < SLIC_CMDQ_MAXCMDS; index++, pslic_handle++) {
2927
2928                 pslic_handle->token.handle_index = index;
2929                 pslic_handle->type = SLIC_HANDLE_FREE;
2930                 pslic_handle->next = adapter->pfree_slic_handles;
2931                 adapter->pfree_slic_handles = pslic_handle;
2932         }
2933         adapter->pshmem = (struct slic_shmem *)
2934                                         pci_alloc_consistent(adapter->pcidev,
2935                                         sizeof(struct slic_shmem),
2936                                         &adapter->
2937                                         phys_shmem);
2938         if (adapter->pshmem)
2939                 memset(adapter->pshmem, 0, sizeof(struct slic_shmem));
2940 }
2941
2942 static const struct net_device_ops slic_netdev_ops = {
2943         .ndo_open               = slic_entry_open,
2944         .ndo_stop               = slic_entry_halt,
2945         .ndo_start_xmit         = slic_xmit_start,
2946         .ndo_do_ioctl           = slic_ioctl,
2947         .ndo_set_mac_address    = slic_mac_set_address,
2948         .ndo_get_stats          = slic_get_stats,
2949         .ndo_set_rx_mode        = slic_mcast_set_list,
2950         .ndo_validate_addr      = eth_validate_addr,
2951         .ndo_change_mtu         = eth_change_mtu,
2952 };
2953
2954 static u32 slic_card_locate(struct adapter *adapter)
2955 {
2956         struct sliccard *card = slic_global.slic_card;
2957         struct physcard *physcard = slic_global.phys_card;
2958         ushort card_hostid;
2959         u16 __iomem *hostid_reg;
2960         uint i;
2961         uint rdhostid_offset = 0;
2962
2963         switch (adapter->devid) {
2964         case SLIC_2GB_DEVICE_ID:
2965                 rdhostid_offset = SLIC_RDHOSTID_2GB;
2966                 break;
2967         case SLIC_1GB_DEVICE_ID:
2968                 rdhostid_offset = SLIC_RDHOSTID_1GB;
2969                 break;
2970         default:
2971                 return -ENODEV;
2972         }
2973
2974         hostid_reg =
2975             (u16 __iomem *) (((u8 __iomem *) (adapter->slic_regs)) +
2976             rdhostid_offset);
2977
2978         /* read the 16 bit hostid from SRAM */
2979         card_hostid = (ushort) readw(hostid_reg);
2980
2981         /* Initialize a new card structure if need be */
2982         if (card_hostid == SLIC_HOSTID_DEFAULT) {
2983                 card = kzalloc(sizeof(struct sliccard), GFP_KERNEL);
2984                 if (card == NULL)
2985                         return -ENOMEM;
2986
2987                 card->next = slic_global.slic_card;
2988                 slic_global.slic_card = card;
2989                 card->busnumber = adapter->busnumber;
2990                 card->slotnumber = adapter->slotnumber;
2991
2992                 /* Find an available cardnum */
2993                 for (i = 0; i < SLIC_MAX_CARDS; i++) {
2994                         if (slic_global.cardnuminuse[i] == 0) {
2995                                 slic_global.cardnuminuse[i] = 1;
2996                                 card->cardnum = i;
2997                                 break;
2998                         }
2999                 }
3000                 slic_global.num_slic_cards++;
3001         } else {
3002                 /* Card exists, find the card this adapter belongs to */
3003                 while (card) {
3004                         if (card->cardnum == card_hostid)
3005                                 break;
3006                         card = card->next;
3007                 }
3008         }
3009
3010         if (!card)
3011                 return -ENXIO;
3012         /* Put the adapter in the card's adapter list */
3013         if (!card->adapter[adapter->port]) {
3014                 card->adapter[adapter->port] = adapter;
3015                 adapter->card = card;
3016         }
3017
3018         card->card_size = 1;    /* one port per *logical* card */
3019
3020         while (physcard) {
3021                 for (i = 0; i < SLIC_MAX_PORTS; i++) {
3022                         if (physcard->adapter[i])
3023                                 break;
3024                 }
3025                 if (i == SLIC_MAX_PORTS)
3026                         break;
3027
3028                 if (physcard->adapter[i]->slotnumber == adapter->slotnumber)
3029                         break;
3030                 physcard = physcard->next;
3031         }
3032         if (!physcard) {
3033                 /* no structure allocated for this physical card yet */
3034                 physcard = kzalloc(sizeof(struct physcard), GFP_ATOMIC);
3035                 if (!physcard) {
3036                         if (card_hostid == SLIC_HOSTID_DEFAULT)
3037                                 kfree(card);
3038                         return -ENOMEM;
3039                 }
3040
3041                 physcard->next = slic_global.phys_card;
3042                 slic_global.phys_card = physcard;
3043                 physcard->adapters_allocd = 1;
3044         } else {
3045                 physcard->adapters_allocd++;
3046         }
3047         /* Note - this is ZERO relative */
3048         adapter->physport = physcard->adapters_allocd - 1;
3049
3050         physcard->adapter[adapter->physport] = adapter;
3051         adapter->physcard = physcard;
3052
3053         return 0;
3054 }
3055
3056 static int slic_entry_probe(struct pci_dev *pcidev,
3057                                const struct pci_device_id *pci_tbl_entry)
3058 {
3059         static int cards_found;
3060         static int did_version;
3061         int err = -ENODEV;
3062         struct net_device *netdev;
3063         struct adapter *adapter;
3064         void __iomem *memmapped_ioaddr = NULL;
3065         ulong mmio_start = 0;
3066         ulong mmio_len = 0;
3067         struct sliccard *card = NULL;
3068         int pci_using_dac = 0;
3069
3070         slic_global.dynamic_intagg = dynamic_intagg;
3071
3072         err = pci_enable_device(pcidev);
3073
3074         if (err)
3075                 return err;
3076
3077         if (did_version++ == 0) {
3078                 dev_info(&pcidev->dev, "%s\n", slic_banner);
3079                 dev_info(&pcidev->dev, "%s\n", slic_proc_version);
3080         }
3081
3082         if (!pci_set_dma_mask(pcidev, DMA_BIT_MASK(64))) {
3083                 pci_using_dac = 1;
3084                 err = pci_set_consistent_dma_mask(pcidev, DMA_BIT_MASK(64));
3085                 if (err) {
3086                         dev_err(&pcidev->dev, "unable to obtain 64-bit DMA for consistent allocations\n");
3087                         goto err_out_disable_pci;
3088                 }
3089         } else {
3090                 err = pci_set_dma_mask(pcidev, DMA_BIT_MASK(32));
3091                 if (err) {
3092                         dev_err(&pcidev->dev, "no usable DMA configuration\n");
3093                         goto err_out_disable_pci;
3094                 }
3095                 pci_using_dac = 0;
3096                 pci_set_consistent_dma_mask(pcidev, DMA_BIT_MASK(32));
3097         }
3098
3099         err = pci_request_regions(pcidev, DRV_NAME);
3100         if (err) {
3101                 dev_err(&pcidev->dev, "can't obtain PCI resources\n");
3102                 goto err_out_disable_pci;
3103         }
3104
3105         pci_set_master(pcidev);
3106
3107         netdev = alloc_etherdev(sizeof(struct adapter));
3108         if (!netdev) {
3109                 err = -ENOMEM;
3110                 goto err_out_exit_slic_probe;
3111         }
3112
3113         SET_NETDEV_DEV(netdev, &pcidev->dev);
3114
3115         pci_set_drvdata(pcidev, netdev);
3116         adapter = netdev_priv(netdev);
3117         adapter->netdev = netdev;
3118         adapter->pcidev = pcidev;
3119         if (pci_using_dac)
3120                 netdev->features |= NETIF_F_HIGHDMA;
3121
3122         mmio_start = pci_resource_start(pcidev, 0);
3123         mmio_len = pci_resource_len(pcidev, 0);
3124
3125
3126 /*      memmapped_ioaddr =  (u32)ioremap_nocache(mmio_start, mmio_len);*/
3127         memmapped_ioaddr = ioremap(mmio_start, mmio_len);
3128         if (!memmapped_ioaddr) {
3129                 dev_err(&pcidev->dev, "cannot remap MMIO region %lx @ %lx\n",
3130                         mmio_len, mmio_start);
3131                 err = -ENOMEM;
3132                 goto err_out_free_netdev;
3133         }
3134
3135         slic_config_pci(pcidev);
3136
3137         slic_init_driver();
3138
3139         slic_init_adapter(netdev,
3140                           pcidev, pci_tbl_entry, memmapped_ioaddr, cards_found);
3141
3142         err = slic_card_locate(adapter);
3143         if (err) {
3144                 dev_err(&pcidev->dev, "cannot locate card\n");
3145                 goto err_out_unmap;
3146         }
3147
3148         card = adapter->card;
3149
3150         if (!adapter->allocated) {
3151                 card->adapters_allocated++;
3152                 adapter->allocated = 1;
3153         }
3154
3155         err = slic_card_init(card, adapter);
3156         if (err)
3157                 goto err_out_unmap;
3158
3159         slic_adapter_set_hwaddr(adapter);
3160
3161         netdev->base_addr = (unsigned long) memmapped_ioaddr;
3162         netdev->irq = adapter->irq;
3163         netdev->netdev_ops = &slic_netdev_ops;
3164
3165         strcpy(netdev->name, "eth%d");
3166         err = register_netdev(netdev);
3167         if (err) {
3168                 dev_err(&pcidev->dev, "Cannot register net device, aborting.\n");
3169                 goto err_out_unmap;
3170         }
3171
3172         cards_found++;
3173
3174         return 0;
3175
3176 err_out_unmap:
3177         iounmap(memmapped_ioaddr);
3178 err_out_free_netdev:
3179         free_netdev(netdev);
3180 err_out_exit_slic_probe:
3181         pci_release_regions(pcidev);
3182 err_out_disable_pci:
3183         pci_disable_device(pcidev);
3184         return err;
3185 }
3186
3187 static struct pci_driver slic_driver = {
3188         .name = DRV_NAME,
3189         .id_table = slic_pci_tbl,
3190         .probe = slic_entry_probe,
3191         .remove = slic_entry_remove,
3192 };
3193
3194 static int __init slic_module_init(void)
3195 {
3196         slic_init_driver();
3197
3198         return pci_register_driver(&slic_driver);
3199 }
3200
3201 static void __exit slic_module_cleanup(void)
3202 {
3203         pci_unregister_driver(&slic_driver);
3204 }
3205
3206 module_init(slic_module_init);
3207 module_exit(slic_module_cleanup);