drivers/clocksource/timer-fttmr010.c

   1 // SPDX-License-Identifier: GPL-2.0
   2 /*
   3  * Faraday Technology FTTMR010 timer driver
   4  * Copyright (C) 2017 Linus Walleij <[email protected]>
   5  *
   6  * Based on a rewrite of arch/arm/mach-gemini/timer.c:
   7  * Copyright (C) 2001-2006 Storlink, Corp.
   8  * Copyright (C) 2008-2009 Paulius Zaleckas <[email protected]>
   9  */
  10 #include <linux/interrupt.h>
  11 #include <linux/io.h>
  12 #include <linux/of.h>
  13 #include <linux/of_address.h>
  14 #include <linux/of_irq.h>
  15 #include <linux/clockchips.h>
  16 #include <linux/clocksource.h>
  17 #include <linux/sched_clock.h>
  18 #include <linux/clk.h>
  19 #include <linux/slab.h>
  20 #include <linux/bitops.h>
  21 #include <linux/delay.h>
  22
  23 /*
  24  * Register definitions for the timers
  25  */
  26 #define TIMER1_COUNT            (0x00)
  27 #define TIMER1_LOAD             (0x04)
  28 #define TIMER1_MATCH1           (0x08)
  29 #define TIMER1_MATCH2           (0x0c)
  30 #define TIMER2_COUNT            (0x10)
  31 #define TIMER2_LOAD             (0x14)
  32 #define TIMER2_MATCH1           (0x18)
  33 #define TIMER2_MATCH2           (0x1c)
  34 #define TIMER3_COUNT            (0x20)
  35 #define TIMER3_LOAD             (0x24)
  36 #define TIMER3_MATCH1           (0x28)
  37 #define TIMER3_MATCH2           (0x2c)
  38 #define TIMER_CR                (0x30)
  39 #define TIMER_INTR_STATE        (0x34)
  40 #define TIMER_INTR_MASK         (0x38)
  41
  42 #define TIMER_1_CR_ENABLE       BIT(0)
  43 #define TIMER_1_CR_CLOCK        BIT(1)
  44 #define TIMER_1_CR_INT          BIT(2)
  45 #define TIMER_2_CR_ENABLE       BIT(3)
  46 #define TIMER_2_CR_CLOCK        BIT(4)
  47 #define TIMER_2_CR_INT          BIT(5)
  48 #define TIMER_3_CR_ENABLE       BIT(6)
  49 #define TIMER_3_CR_CLOCK        BIT(7)
  50 #define TIMER_3_CR_INT          BIT(8)
  51 #define TIMER_1_CR_UPDOWN       BIT(9)
  52 #define TIMER_2_CR_UPDOWN       BIT(10)
  53 #define TIMER_3_CR_UPDOWN       BIT(11)
  54
  55 /*
  56  * The Aspeed AST2400 moves bits around in the control register
  57  * and lacks bits for setting the timer to count upwards.
  58  */
  59 #define TIMER_1_CR_ASPEED_ENABLE        BIT(0)
  60 #define TIMER_1_CR_ASPEED_CLOCK         BIT(1)
  61 #define TIMER_1_CR_ASPEED_INT           BIT(2)
  62 #define TIMER_2_CR_ASPEED_ENABLE        BIT(4)
  63 #define TIMER_2_CR_ASPEED_CLOCK         BIT(5)
  64 #define TIMER_2_CR_ASPEED_INT           BIT(6)
  65 #define TIMER_3_CR_ASPEED_ENABLE        BIT(8)
  66 #define TIMER_3_CR_ASPEED_CLOCK         BIT(9)
  67 #define TIMER_3_CR_ASPEED_INT           BIT(10)
  68
  69 #define TIMER_1_INT_MATCH1      BIT(0)
  70 #define TIMER_1_INT_MATCH2      BIT(1)
  71 #define TIMER_1_INT_OVERFLOW    BIT(2)
  72 #define TIMER_2_INT_MATCH1      BIT(3)
  73 #define TIMER_2_INT_MATCH2      BIT(4)
  74 #define TIMER_2_INT_OVERFLOW    BIT(5)
  75 #define TIMER_3_INT_MATCH1      BIT(6)
  76 #define TIMER_3_INT_MATCH2      BIT(7)
  77 #define TIMER_3_INT_OVERFLOW    BIT(8)
  78 #define TIMER_INT_ALL_MASK      0x1ff
  79
  80 struct fttmr010 {
  81         void __iomem *base;
  82         unsigned int tick_rate;
  83         bool count_down;
  84         u32 t1_enable_val;
  85         struct clock_event_device clkevt;
  86 #ifdef CONFIG_ARM
  87         struct delay_timer delay_timer;
  88 #endif
  89 };
  90
  91 /*
  92  * A local singleton used by sched_clock and delay timer reads, which are
  93  * fast and stateless
  94  */
  95 static struct fttmr010 *local_fttmr;
  96
  97 static inline struct fttmr010 *to_fttmr010(struct clock_event_device *evt)
  98 {
  99         return container_of(evt, struct fttmr010, clkevt);
 100 }
 101
 102 static unsigned long fttmr010_read_current_timer_up(void)
 103 {
 104         return readl(local_fttmr->base + TIMER2_COUNT);
 105 }
 106
 107 static unsigned long fttmr010_read_current_timer_down(void)
 108 {
 109         return ~readl(local_fttmr->base + TIMER2_COUNT);
 110 }
 111
 112 static u64 notrace fttmr010_read_sched_clock_up(void)
 113 {
 114         return fttmr010_read_current_timer_up();
 115 }
 116
 117 static u64 notrace fttmr010_read_sched_clock_down(void)
 118 {
 119         return fttmr010_read_current_timer_down();
 120 }
 121
 122 static int fttmr010_timer_set_next_event(unsigned long cycles,
 123                                        struct clock_event_device *evt)
 124 {
 125         struct fttmr010 *fttmr010 = to_fttmr010(evt);
 126         u32 cr;
 127
 128         /* Stop */
 129         cr = readl(fttmr010->base + TIMER_CR);
 130         cr &= ~fttmr010->t1_enable_val;
 131         writel(cr, fttmr010->base + TIMER_CR);
 132
 133         if (fttmr010->count_down) {
 134                 /*
 135                  * ASPEED Timer Controller will load TIMER1_LOAD register
 136                  * into TIMER1_COUNT register when the timer is re-enabled.
 137                  */
 138                 writel(cycles, fttmr010->base + TIMER1_LOAD);
 139         } else {
 140                 /* Setup the match register forward in time */
 141                 cr = readl(fttmr010->base + TIMER1_COUNT);
 142                 writel(cr + cycles, fttmr010->base + TIMER1_MATCH1);
 143         }
 144
 145         /* Start */
 146         cr = readl(fttmr010->base + TIMER_CR);
 147         cr |= fttmr010->t1_enable_val;
 148         writel(cr, fttmr010->base + TIMER_CR);
 149
 150         return 0;
 151 }
 152
 153 static int fttmr010_timer_shutdown(struct clock_event_device *evt)
 154 {
 155         struct fttmr010 *fttmr010 = to_fttmr010(evt);
 156         u32 cr;
 157
 158         /* Stop */
 159         cr = readl(fttmr010->base + TIMER_CR);
 160         cr &= ~fttmr010->t1_enable_val;
 161         writel(cr, fttmr010->base + TIMER_CR);
 162
 163         return 0;
 164 }
 165
 166 static int fttmr010_timer_set_oneshot(struct clock_event_device *evt)
 167 {
 168         struct fttmr010 *fttmr010 = to_fttmr010(evt);
 169         u32 cr;
 170
 171         /* Stop */
 172         cr = readl(fttmr010->base + TIMER_CR);
 173         cr &= ~fttmr010->t1_enable_val;
 174         writel(cr, fttmr010->base + TIMER_CR);
 175
 176         /* Setup counter start from 0 or ~0 */
 177         writel(0, fttmr010->base + TIMER1_COUNT);
 178         if (fttmr010->count_down)
 179                 writel(~0, fttmr010->base + TIMER1_LOAD);
 180         else
 181                 writel(0, fttmr010->base + TIMER1_LOAD);
 182
 183         /* Enable interrupt */
 184         cr = readl(fttmr010->base + TIMER_INTR_MASK);
 185         cr &= ~(TIMER_1_INT_OVERFLOW | TIMER_1_INT_MATCH2);
 186         cr |= TIMER_1_INT_MATCH1;
 187         writel(cr, fttmr010->base + TIMER_INTR_MASK);
 188
 189         return 0;
 190 }
 191
 192 static int fttmr010_timer_set_periodic(struct clock_event_device *evt)
 193 {
 194         struct fttmr010 *fttmr010 = to_fttmr010(evt);
 195         u32 period = DIV_ROUND_CLOSEST(fttmr010->tick_rate, HZ);
 196         u32 cr;
 197
 198         /* Stop */
 199         cr = readl(fttmr010->base + TIMER_CR);
 200         cr &= ~fttmr010->t1_enable_val;
 201         writel(cr, fttmr010->base + TIMER_CR);
 202
 203         /* Setup timer to fire at 1/HZ intervals. */
 204         if (fttmr010->count_down) {
 205                 writel(period, fttmr010->base + TIMER1_LOAD);
 206                 writel(0, fttmr010->base + TIMER1_MATCH1);
 207         } else {
 208                 cr = 0xffffffff - (period - 1);
 209                 writel(cr, fttmr010->base + TIMER1_COUNT);
 210                 writel(cr, fttmr010->base + TIMER1_LOAD);
 211
 212                 /* Enable interrupt on overflow */
 213                 cr = readl(fttmr010->base + TIMER_INTR_MASK);
 214                 cr &= ~(TIMER_1_INT_MATCH1 | TIMER_1_INT_MATCH2);
 215                 cr |= TIMER_1_INT_OVERFLOW;
 216                 writel(cr, fttmr010->base + TIMER_INTR_MASK);
 217         }
 218
 219         /* Start the timer */
 220         cr = readl(fttmr010->base + TIMER_CR);
 221         cr |= fttmr010->t1_enable_val;
 222         writel(cr, fttmr010->base + TIMER_CR);
 223
 224         return 0;
 225 }
 226
 227 /*
 228  * IRQ handler for the timer
 229  */
 230 static irqreturn_t fttmr010_timer_interrupt(int irq, void *dev_id)
 231 {
 232         struct clock_event_device *evt = dev_id;
 233
 234         evt->event_handler(evt);
 235         return IRQ_HANDLED;
 236 }
 237
 238 static int __init fttmr010_common_init(struct device_node *np, bool is_aspeed)
 239 {
 240         struct fttmr010 *fttmr010;
 241         int irq;
 242         struct clk *clk;
 243         int ret;
 244         u32 val;
 245
 246         /*
 247          * These implementations require a clock reference.
 248          * FIXME: we currently only support clocking using PCLK
 249          * and using EXTCLK is not supported in the driver.
 250          */
 251         clk = of_clk_get_by_name(np, "PCLK");
 252         if (IS_ERR(clk)) {
 253                 pr_err("could not get PCLK\n");
 254                 return PTR_ERR(clk);
 255         }
 256         ret = clk_prepare_enable(clk);
 257         if (ret) {
 258                 pr_err("failed to enable PCLK\n");
 259                 return ret;
 260         }
 261
 262         fttmr010 = kzalloc(sizeof(*fttmr010), GFP_KERNEL);
 263         if (!fttmr010) {
 264                 ret = -ENOMEM;
 265                 goto out_disable_clock;
 266         }
 267         fttmr010->tick_rate = clk_get_rate(clk);
 268
 269         fttmr010->base = of_iomap(np, 0);
 270         if (!fttmr010->base) {
 271                 pr_err("Can't remap registers\n");
 272                 ret = -ENXIO;
 273                 goto out_free;
 274         }
 275         /* IRQ for timer 1 */
 276         irq = irq_of_parse_and_map(np, 0);
 277         if (irq <= 0) {
 278                 pr_err("Can't parse IRQ\n");
 279                 ret = -EINVAL;
 280                 goto out_unmap;
 281         }
 282
 283         /*
 284          * The Aspeed AST2400 moves bits around in the control register,
 285          * otherwise it works the same.
 286          */
 287         if (is_aspeed) {
 288                 fttmr010->t1_enable_val = TIMER_1_CR_ASPEED_ENABLE |
 289                         TIMER_1_CR_ASPEED_INT;
 290                 /* Downward not available */
 291                 fttmr010->count_down = true;
 292         } else {
 293                 fttmr010->t1_enable_val = TIMER_1_CR_ENABLE | TIMER_1_CR_INT;
 294         }
 295
 296         /*
 297          * Reset the interrupt mask and status
 298          */
 299         writel(TIMER_INT_ALL_MASK, fttmr010->base + TIMER_INTR_MASK);
 300         writel(0, fttmr010->base + TIMER_INTR_STATE);
 301
 302         /*
 303          * Enable timer 1 count up, timer 2 count up, except on Aspeed,
 304          * where everything just counts down.
 305          */
 306         if (is_aspeed)
 307                 val = TIMER_2_CR_ASPEED_ENABLE;
 308         else {
 309                 val = TIMER_2_CR_ENABLE;
 310                 if (!fttmr010->count_down)
 311                         val |= TIMER_1_CR_UPDOWN | TIMER_2_CR_UPDOWN;
 312         }
 313         writel(val, fttmr010->base + TIMER_CR);
 314
 315         /*
 316          * Setup free-running clocksource timer (interrupts
 317          * disabled.)
 318          */
 319         local_fttmr = fttmr010;
 320         writel(0, fttmr010->base + TIMER2_COUNT);
 321         writel(0, fttmr010->base + TIMER2_MATCH1);
 322         writel(0, fttmr010->base + TIMER2_MATCH2);
 323
 324         if (fttmr010->count_down) {
 325                 writel(~0, fttmr010->base + TIMER2_LOAD);
 326                 clocksource_mmio_init(fttmr010->base + TIMER2_COUNT,
 327                                       "FTTMR010-TIMER2",
 328                                       fttmr010->tick_rate,
 329                                       300, 32, clocksource_mmio_readl_down);
 330                 sched_clock_register(fttmr010_read_sched_clock_down, 32,
 331                                      fttmr010->tick_rate);
 332         } else {
 333                 writel(0, fttmr010->base + TIMER2_LOAD);
 334                 clocksource_mmio_init(fttmr010->base + TIMER2_COUNT,
 335                                       "FTTMR010-TIMER2",
 336                                       fttmr010->tick_rate,
 337                                       300, 32, clocksource_mmio_readl_up);
 338                 sched_clock_register(fttmr010_read_sched_clock_up, 32,
 339                                      fttmr010->tick_rate);
 340         }
 341
 342         /*
 343          * Setup clockevent timer (interrupt-driven) on timer 1.
 344          */
 345         writel(0, fttmr010->base + TIMER1_COUNT);
 346         writel(0, fttmr010->base + TIMER1_LOAD);
 347         writel(0, fttmr010->base + TIMER1_MATCH1);
 348         writel(0, fttmr010->base + TIMER1_MATCH2);
 349         ret = request_irq(irq, fttmr010_timer_interrupt, IRQF_TIMER,
 350                           "FTTMR010-TIMER1", &fttmr010->clkevt);
 351         if (ret) {
 352                 pr_err("FTTMR010-TIMER1 no IRQ\n");
 353                 goto out_unmap;
 354         }
 355
 356         fttmr010->clkevt.name = "FTTMR010-TIMER1";
 357         /* Reasonably fast and accurate clock event */
 358         fttmr010->clkevt.rating = 300;
 359         fttmr010->clkevt.features = CLOCK_EVT_FEAT_PERIODIC |
 360                 CLOCK_EVT_FEAT_ONESHOT;
 361         fttmr010->clkevt.set_next_event = fttmr010_timer_set_next_event;
 362         fttmr010->clkevt.set_state_shutdown = fttmr010_timer_shutdown;
 363         fttmr010->clkevt.set_state_periodic = fttmr010_timer_set_periodic;
 364         fttmr010->clkevt.set_state_oneshot = fttmr010_timer_set_oneshot;
 365         fttmr010->clkevt.tick_resume = fttmr010_timer_shutdown;
 366         fttmr010->clkevt.cpumask = cpumask_of(0);
 367         fttmr010->clkevt.irq = irq;
 368         clockevents_config_and_register(&fttmr010->clkevt,
 369                                         fttmr010->tick_rate,
 370                                         1, 0xffffffff);
 371
 372 #ifdef CONFIG_ARM
 373         /* Also use this timer for delays */
 374         if (fttmr010->count_down)
 375                 fttmr010->delay_timer.read_current_timer =
 376                         fttmr010_read_current_timer_down;
 377         else
 378                 fttmr010->delay_timer.read_current_timer =
 379                         fttmr010_read_current_timer_up;
 380         fttmr010->delay_timer.freq = fttmr010->tick_rate;
 381         register_current_timer_delay(&fttmr010->delay_timer);
 382 #endif
 383
 384         return 0;
 385
 386 out_unmap:
 387         iounmap(fttmr010->base);
 388 out_free:
 389         kfree(fttmr010);
 390 out_disable_clock:
 391         clk_disable_unprepare(clk);
 392
 393         return ret;
 394 }
 395
 396 static __init int aspeed_timer_init(struct device_node *np)
 397 {
 398         return fttmr010_common_init(np, true);
 399 }
 400
 401 static __init int fttmr010_timer_init(struct device_node *np)
 402 {
 403         return fttmr010_common_init(np, false);
 404 }
 405
 406 TIMER_OF_DECLARE(fttmr010, "faraday,fttmr010", fttmr010_timer_init);
 407 TIMER_OF_DECLARE(gemini, "cortina,gemini-timer", fttmr010_timer_init);
 408 TIMER_OF_DECLARE(moxart, "moxa,moxart-timer", fttmr010_timer_init);
 409 TIMER_OF_DECLARE(ast2400, "aspeed,ast2400-timer", aspeed_timer_init);
 410 TIMER_OF_DECLARE(ast2500, "aspeed,ast2500-timer", aspeed_timer_init);