]> Git Repo - linux.git/blob - drivers/platform/chrome/cros_ec_ishtp.c
Bluetooth: hci_qca: Add support for Qualcomm Bluetooth SoC WCN3991
[linux.git] / drivers / platform / chrome / cros_ec_ishtp.c
1 // SPDX-License-Identifier: GPL-2.0
2 // ISHTP interface for ChromeOS Embedded Controller
3 //
4 // Copyright (c) 2019, Intel Corporation.
5 //
6 // ISHTP client driver for talking to the Chrome OS EC firmware running
7 // on Intel Integrated Sensor Hub (ISH) using the ISH Transport protocol
8 // (ISH-TP).
9
10 #include <linux/delay.h>
11 #include <linux/module.h>
12 #include <linux/pci.h>
13 #include <linux/platform_data/cros_ec_commands.h>
14 #include <linux/platform_data/cros_ec_proto.h>
15 #include <linux/intel-ish-client-if.h>
16
17 /*
18  * ISH TX/RX ring buffer pool size
19  *
20  * The AP->ISH messages and corresponding ISH->AP responses are
21  * serialized. We need 1 TX and 1 RX buffer for these.
22  *
23  * The MKBP ISH->AP events are serialized. We need one additional RX
24  * buffer for them.
25  */
26 #define CROS_ISH_CL_TX_RING_SIZE                8
27 #define CROS_ISH_CL_RX_RING_SIZE                8
28
29 /* ISH CrOS EC Host Commands */
30 enum cros_ec_ish_channel {
31         CROS_EC_COMMAND = 1,                    /* AP->ISH message */
32         CROS_MKBP_EVENT = 2,                    /* ISH->AP events */
33 };
34
35 /*
36  * ISH firmware timeout for 1 message send failure is 1Hz, and the
37  * firmware will retry 2 times, so 3Hz is used for timeout.
38  */
39 #define ISHTP_SEND_TIMEOUT                      (3 * HZ)
40
41 /* ISH Transport CrOS EC ISH client unique GUID */
42 static const guid_t cros_ish_guid =
43         GUID_INIT(0x7b7154d0, 0x56f4, 0x4bdc,
44                   0xb0, 0xd8, 0x9e, 0x7c, 0xda, 0xe0, 0xd6, 0xa0);
45
46 struct header {
47         u8 channel;
48         u8 status;
49         u8 reserved[2];
50 } __packed;
51
52 struct cros_ish_out_msg {
53         struct header hdr;
54         struct ec_host_request ec_request;
55 } __packed;
56
57 struct cros_ish_in_msg {
58         struct header hdr;
59         struct ec_host_response ec_response;
60 } __packed;
61
62 #define IN_MSG_EC_RESPONSE_PREAMBLE                                     \
63         offsetof(struct cros_ish_in_msg, ec_response)
64
65 #define OUT_MSG_EC_REQUEST_PREAMBLE                                     \
66         offsetof(struct cros_ish_out_msg, ec_request)
67
68 #define cl_data_to_dev(client_data) ishtp_device((client_data)->cl_device)
69
70 /*
71  * The Read-Write Semaphore is used to prevent message TX or RX while
72  * the ishtp client is being initialized or undergoing reset.
73  *
74  * The readers are the kernel function calls responsible for IA->ISH
75  * and ISH->AP messaging.
76  *
77  * The writers are .reset() and .probe() function.
78  */
79 DECLARE_RWSEM(init_lock);
80
81 /**
82  * struct response_info - Encapsulate firmware response related
83  * information for passing between function ish_send() and
84  * process_recv() callback.
85  *
86  * @data: Copy the data received from firmware here.
87  * @max_size: Max size allocated for the @data buffer. If the received
88  * data exceeds this value, we log an error.
89  * @size: Actual size of data received from firmware.
90  * @error: 0 for success, negative error code for a failure in process_recv().
91  * @received: Set to true on receiving a valid firmware response to host command
92  * @wait_queue: Wait queue for host to wait for firmware response.
93  */
94 struct response_info {
95         void *data;
96         size_t max_size;
97         size_t size;
98         int error;
99         bool received;
100         wait_queue_head_t wait_queue;
101 };
102
103 /**
104  * struct ishtp_cl_data - Encapsulate per ISH TP Client.
105  *
106  * @cros_ish_cl: ISHTP firmware client instance.
107  * @cl_device: ISHTP client device instance.
108  * @response: Response info passing between ish_send() and process_recv().
109  * @work_ishtp_reset: Work queue reset handling.
110  * @work_ec_evt: Work queue for EC events.
111  * @ec_dev: CrOS EC MFD device.
112  *
113  * This structure is used to store per client data.
114  */
115 struct ishtp_cl_data {
116         struct ishtp_cl *cros_ish_cl;
117         struct ishtp_cl_device *cl_device;
118
119         /*
120          * Used for passing firmware response information between
121          * ish_send() and process_recv() callback.
122          */
123         struct response_info response;
124
125         struct work_struct work_ishtp_reset;
126         struct work_struct work_ec_evt;
127         struct cros_ec_device *ec_dev;
128 };
129
130 /**
131  * ish_evt_handler - ISH to AP event handler
132  * @work: Work struct
133  */
134 static void ish_evt_handler(struct work_struct *work)
135 {
136         struct ishtp_cl_data *client_data =
137                 container_of(work, struct ishtp_cl_data, work_ec_evt);
138         struct cros_ec_device *ec_dev = client_data->ec_dev;
139
140         if (cros_ec_get_next_event(ec_dev, NULL) > 0) {
141                 blocking_notifier_call_chain(&ec_dev->event_notifier,
142                                              0, ec_dev);
143         }
144 }
145
146 /**
147  * ish_send() - Send message from host to firmware
148  *
149  * @client_data: Client data instance
150  * @out_msg: Message buffer to be sent to firmware
151  * @out_size: Size of out going message
152  * @in_msg: Message buffer where the incoming data is copied. This buffer
153  * is allocated by calling
154  * @in_size: Max size of incoming message
155  *
156  * Return: Number of bytes copied in the in_msg on success, negative
157  * error code on failure.
158  */
159 static int ish_send(struct ishtp_cl_data *client_data,
160                     u8 *out_msg, size_t out_size,
161                     u8 *in_msg, size_t in_size)
162 {
163         int rv;
164         struct header *out_hdr = (struct header *)out_msg;
165         struct ishtp_cl *cros_ish_cl = client_data->cros_ish_cl;
166
167         dev_dbg(cl_data_to_dev(client_data),
168                 "%s: channel=%02u status=%02u\n",
169                 __func__, out_hdr->channel, out_hdr->status);
170
171         /* Setup for incoming response */
172         client_data->response.data = in_msg;
173         client_data->response.max_size = in_size;
174         client_data->response.error = 0;
175         client_data->response.received = false;
176
177         rv = ishtp_cl_send(cros_ish_cl, out_msg, out_size);
178         if (rv) {
179                 dev_err(cl_data_to_dev(client_data),
180                         "ishtp_cl_send error %d\n", rv);
181                 return rv;
182         }
183
184         wait_event_interruptible_timeout(client_data->response.wait_queue,
185                                          client_data->response.received,
186                                          ISHTP_SEND_TIMEOUT);
187         if (!client_data->response.received) {
188                 dev_err(cl_data_to_dev(client_data),
189                         "Timed out for response to host message\n");
190                 return -ETIMEDOUT;
191         }
192
193         if (client_data->response.error < 0)
194                 return client_data->response.error;
195
196         return client_data->response.size;
197 }
198
199 /**
200  * process_recv() - Received and parse incoming packet
201  * @cros_ish_cl: Client instance to get stats
202  * @rb_in_proc: Host interface message buffer
203  *
204  * Parse the incoming packet. If it is a response packet then it will
205  * update per instance flags and wake up the caller waiting to for the
206  * response. If it is an event packet then it will schedule event work.
207  */
208 static void process_recv(struct ishtp_cl *cros_ish_cl,
209                          struct ishtp_cl_rb *rb_in_proc)
210 {
211         size_t data_len = rb_in_proc->buf_idx;
212         struct ishtp_cl_data *client_data =
213                 ishtp_get_client_data(cros_ish_cl);
214         struct device *dev = cl_data_to_dev(client_data);
215         struct cros_ish_in_msg *in_msg =
216                 (struct cros_ish_in_msg *)rb_in_proc->buffer.data;
217
218         /* Proceed only if reset or init is not in progress */
219         if (!down_read_trylock(&init_lock)) {
220                 /* Free the buffer */
221                 ishtp_cl_io_rb_recycle(rb_in_proc);
222                 dev_warn(dev,
223                          "Host is not ready to receive incoming messages\n");
224                 return;
225         }
226
227         /*
228          * All firmware messages contain a header. Check the buffer size
229          * before accessing elements inside.
230          */
231         if (!rb_in_proc->buffer.data) {
232                 dev_warn(dev, "rb_in_proc->buffer.data returned null");
233                 client_data->response.error = -EBADMSG;
234                 goto end_error;
235         }
236
237         if (data_len < sizeof(struct header)) {
238                 dev_err(dev, "data size %zu is less than header %zu\n",
239                         data_len, sizeof(struct header));
240                 client_data->response.error = -EMSGSIZE;
241                 goto end_error;
242         }
243
244         dev_dbg(dev, "channel=%02u status=%02u\n",
245                 in_msg->hdr.channel, in_msg->hdr.status);
246
247         switch (in_msg->hdr.channel) {
248         case CROS_EC_COMMAND:
249                 /* Sanity check */
250                 if (!client_data->response.data) {
251                         dev_err(dev,
252                                 "Receiving buffer is null. Should be allocated by calling function\n");
253                         client_data->response.error = -EINVAL;
254                         goto error_wake_up;
255                 }
256
257                 if (client_data->response.received) {
258                         dev_err(dev,
259                                 "Previous firmware message not yet processed\n");
260                         client_data->response.error = -EINVAL;
261                         goto error_wake_up;
262                 }
263
264                 if (data_len > client_data->response.max_size) {
265                         dev_err(dev,
266                                 "Received buffer size %zu is larger than allocated buffer %zu\n",
267                                 data_len, client_data->response.max_size);
268                         client_data->response.error = -EMSGSIZE;
269                         goto error_wake_up;
270                 }
271
272                 if (in_msg->hdr.status) {
273                         dev_err(dev, "firmware returned status %d\n",
274                                 in_msg->hdr.status);
275                         client_data->response.error = -EIO;
276                         goto error_wake_up;
277                 }
278
279                 /* Update the actual received buffer size */
280                 client_data->response.size = data_len;
281
282                 /*
283                  * Copy the buffer received in firmware response for the
284                  * calling thread.
285                  */
286                 memcpy(client_data->response.data,
287                        rb_in_proc->buffer.data, data_len);
288
289                 /* Set flag before waking up the caller */
290                 client_data->response.received = true;
291 error_wake_up:
292                 /* Wake the calling thread */
293                 wake_up_interruptible(&client_data->response.wait_queue);
294
295                 break;
296
297         case CROS_MKBP_EVENT:
298                 /* The event system doesn't send any data in buffer */
299                 schedule_work(&client_data->work_ec_evt);
300
301                 break;
302
303         default:
304                 dev_err(dev, "Invalid channel=%02d\n", in_msg->hdr.channel);
305         }
306
307 end_error:
308         /* Free the buffer */
309         ishtp_cl_io_rb_recycle(rb_in_proc);
310
311         up_read(&init_lock);
312 }
313
314 /**
315  * ish_event_cb() - bus driver callback for incoming message
316  * @cl_device: ISHTP client device for which this message is targeted.
317  *
318  * Remove the packet from the list and process the message by calling
319  * process_recv.
320  */
321 static void ish_event_cb(struct ishtp_cl_device *cl_device)
322 {
323         struct ishtp_cl_rb *rb_in_proc;
324         struct ishtp_cl *cros_ish_cl = ishtp_get_drvdata(cl_device);
325
326         while ((rb_in_proc = ishtp_cl_rx_get_rb(cros_ish_cl)) != NULL) {
327                 /* Decide what to do with received data */
328                 process_recv(cros_ish_cl, rb_in_proc);
329         }
330 }
331
332 /**
333  * cros_ish_init() - Init function for ISHTP client
334  * @cros_ish_cl: ISHTP client instance
335  *
336  * This function complete the initializtion of the client.
337  *
338  * Return: 0 for success, negative error code for failure.
339  */
340 static int cros_ish_init(struct ishtp_cl *cros_ish_cl)
341 {
342         int rv;
343         struct ishtp_device *dev;
344         struct ishtp_fw_client *fw_client;
345         struct ishtp_cl_data *client_data = ishtp_get_client_data(cros_ish_cl);
346
347         rv = ishtp_cl_link(cros_ish_cl);
348         if (rv) {
349                 dev_err(cl_data_to_dev(client_data),
350                         "ishtp_cl_link failed\n");
351                 return rv;
352         }
353
354         dev = ishtp_get_ishtp_device(cros_ish_cl);
355
356         /* Connect to firmware client */
357         ishtp_set_tx_ring_size(cros_ish_cl, CROS_ISH_CL_TX_RING_SIZE);
358         ishtp_set_rx_ring_size(cros_ish_cl, CROS_ISH_CL_RX_RING_SIZE);
359
360         fw_client = ishtp_fw_cl_get_client(dev, &cros_ish_guid);
361         if (!fw_client) {
362                 dev_err(cl_data_to_dev(client_data),
363                         "ish client uuid not found\n");
364                 rv = -ENOENT;
365                 goto err_cl_unlink;
366         }
367
368         ishtp_cl_set_fw_client_id(cros_ish_cl,
369                                   ishtp_get_fw_client_id(fw_client));
370         ishtp_set_connection_state(cros_ish_cl, ISHTP_CL_CONNECTING);
371
372         rv = ishtp_cl_connect(cros_ish_cl);
373         if (rv) {
374                 dev_err(cl_data_to_dev(client_data),
375                         "client connect fail\n");
376                 goto err_cl_unlink;
377         }
378
379         ishtp_register_event_cb(client_data->cl_device, ish_event_cb);
380         return 0;
381
382 err_cl_unlink:
383         ishtp_cl_unlink(cros_ish_cl);
384         return rv;
385 }
386
387 /**
388  * cros_ish_deinit() - Deinit function for ISHTP client
389  * @cros_ish_cl: ISHTP client instance
390  *
391  * Unlink and free cros_ec client
392  */
393 static void cros_ish_deinit(struct ishtp_cl *cros_ish_cl)
394 {
395         ishtp_set_connection_state(cros_ish_cl, ISHTP_CL_DISCONNECTING);
396         ishtp_cl_disconnect(cros_ish_cl);
397         ishtp_cl_unlink(cros_ish_cl);
398         ishtp_cl_flush_queues(cros_ish_cl);
399
400         /* Disband and free all Tx and Rx client-level rings */
401         ishtp_cl_free(cros_ish_cl);
402 }
403
404 /**
405  * prepare_cros_ec_rx() - Check & prepare receive buffer
406  * @ec_dev: CrOS EC MFD device.
407  * @in_msg: Incoming message buffer
408  * @msg: cros_ec command used to send & receive data
409  *
410  * Return: 0 for success, negative error code for failure.
411  *
412  * Check the received buffer. Convert to cros_ec_command format.
413  */
414 static int prepare_cros_ec_rx(struct cros_ec_device *ec_dev,
415                               const struct cros_ish_in_msg *in_msg,
416                               struct cros_ec_command *msg)
417 {
418         u8 sum = 0;
419         int i, rv, offset;
420
421         /* Check response error code */
422         msg->result = in_msg->ec_response.result;
423         rv = cros_ec_check_result(ec_dev, msg);
424         if (rv < 0)
425                 return rv;
426
427         if (in_msg->ec_response.data_len > msg->insize) {
428                 dev_err(ec_dev->dev, "Packet too long (%d bytes, expected %d)",
429                         in_msg->ec_response.data_len, msg->insize);
430                 return -ENOSPC;
431         }
432
433         /* Copy response packet payload and compute checksum */
434         for (i = 0; i < sizeof(struct ec_host_response); i++)
435                 sum += ((u8 *)in_msg)[IN_MSG_EC_RESPONSE_PREAMBLE + i];
436
437         offset = sizeof(struct cros_ish_in_msg);
438         for (i = 0; i < in_msg->ec_response.data_len; i++)
439                 sum += msg->data[i] = ((u8 *)in_msg)[offset + i];
440
441         if (sum) {
442                 dev_dbg(ec_dev->dev, "Bad received packet checksum %d\n", sum);
443                 return -EBADMSG;
444         }
445
446         return 0;
447 }
448
449 static int cros_ec_pkt_xfer_ish(struct cros_ec_device *ec_dev,
450                                 struct cros_ec_command *msg)
451 {
452         int rv;
453         struct ishtp_cl *cros_ish_cl = ec_dev->priv;
454         struct ishtp_cl_data *client_data = ishtp_get_client_data(cros_ish_cl);
455         struct device *dev = cl_data_to_dev(client_data);
456         struct cros_ish_in_msg *in_msg = (struct cros_ish_in_msg *)ec_dev->din;
457         struct cros_ish_out_msg *out_msg =
458                 (struct cros_ish_out_msg *)ec_dev->dout;
459         size_t in_size = sizeof(struct cros_ish_in_msg) + msg->insize;
460         size_t out_size = sizeof(struct cros_ish_out_msg) + msg->outsize;
461
462         /* Sanity checks */
463         if (in_size > ec_dev->din_size) {
464                 dev_err(dev,
465                         "Incoming payload size %zu is too large for ec_dev->din_size %d\n",
466                         in_size, ec_dev->din_size);
467                 return -EMSGSIZE;
468         }
469
470         if (out_size > ec_dev->dout_size) {
471                 dev_err(dev,
472                         "Outgoing payload size %zu is too large for ec_dev->dout_size %d\n",
473                         out_size, ec_dev->dout_size);
474                 return -EMSGSIZE;
475         }
476
477         /* Proceed only if reset-init is not in progress */
478         if (!down_read_trylock(&init_lock)) {
479                 dev_warn(dev,
480                          "Host is not ready to send messages to ISH. Try again\n");
481                 return -EAGAIN;
482         }
483
484         /* Prepare the package to be sent over ISH TP */
485         out_msg->hdr.channel = CROS_EC_COMMAND;
486         out_msg->hdr.status = 0;
487
488         ec_dev->dout += OUT_MSG_EC_REQUEST_PREAMBLE;
489         cros_ec_prepare_tx(ec_dev, msg);
490         ec_dev->dout -= OUT_MSG_EC_REQUEST_PREAMBLE;
491
492         dev_dbg(dev,
493                 "out_msg: struct_ver=0x%x checksum=0x%x command=0x%x command_ver=0x%x data_len=0x%x\n",
494                 out_msg->ec_request.struct_version,
495                 out_msg->ec_request.checksum,
496                 out_msg->ec_request.command,
497                 out_msg->ec_request.command_version,
498                 out_msg->ec_request.data_len);
499
500         /* Send command to ISH EC firmware and read response */
501         rv = ish_send(client_data,
502                       (u8 *)out_msg, out_size,
503                       (u8 *)in_msg, in_size);
504         if (rv < 0)
505                 goto end_error;
506
507         rv = prepare_cros_ec_rx(ec_dev, in_msg, msg);
508         if (rv)
509                 goto end_error;
510
511         rv = in_msg->ec_response.data_len;
512
513         dev_dbg(dev,
514                 "in_msg: struct_ver=0x%x checksum=0x%x result=0x%x data_len=0x%x\n",
515                 in_msg->ec_response.struct_version,
516                 in_msg->ec_response.checksum,
517                 in_msg->ec_response.result,
518                 in_msg->ec_response.data_len);
519
520 end_error:
521         if (msg->command == EC_CMD_REBOOT_EC)
522                 msleep(EC_REBOOT_DELAY_MS);
523
524         up_read(&init_lock);
525
526         return rv;
527 }
528
529 static int cros_ec_dev_init(struct ishtp_cl_data *client_data)
530 {
531         struct cros_ec_device *ec_dev;
532         struct device *dev = cl_data_to_dev(client_data);
533
534         ec_dev = devm_kzalloc(dev, sizeof(*ec_dev), GFP_KERNEL);
535         if (!ec_dev)
536                 return -ENOMEM;
537
538         client_data->ec_dev = ec_dev;
539         dev->driver_data = ec_dev;
540
541         ec_dev->dev = dev;
542         ec_dev->priv = client_data->cros_ish_cl;
543         ec_dev->cmd_xfer = NULL;
544         ec_dev->pkt_xfer = cros_ec_pkt_xfer_ish;
545         ec_dev->phys_name = dev_name(dev);
546         ec_dev->din_size = sizeof(struct cros_ish_in_msg) +
547                            sizeof(struct ec_response_get_protocol_info);
548         ec_dev->dout_size = sizeof(struct cros_ish_out_msg);
549
550         return cros_ec_register(ec_dev);
551 }
552
553 static void reset_handler(struct work_struct *work)
554 {
555         int rv;
556         struct device *dev;
557         struct ishtp_cl *cros_ish_cl;
558         struct ishtp_cl_device *cl_device;
559         struct ishtp_cl_data *client_data =
560                 container_of(work, struct ishtp_cl_data, work_ishtp_reset);
561
562         /* Lock for reset to complete */
563         down_write(&init_lock);
564
565         cros_ish_cl = client_data->cros_ish_cl;
566         cl_device = client_data->cl_device;
567
568         /* Unlink, flush queues & start again */
569         ishtp_cl_unlink(cros_ish_cl);
570         ishtp_cl_flush_queues(cros_ish_cl);
571         ishtp_cl_free(cros_ish_cl);
572
573         cros_ish_cl = ishtp_cl_allocate(cl_device);
574         if (!cros_ish_cl) {
575                 up_write(&init_lock);
576                 return;
577         }
578
579         ishtp_set_drvdata(cl_device, cros_ish_cl);
580         ishtp_set_client_data(cros_ish_cl, client_data);
581         client_data->cros_ish_cl = cros_ish_cl;
582
583         rv = cros_ish_init(cros_ish_cl);
584         if (rv) {
585                 ishtp_cl_free(cros_ish_cl);
586                 dev_err(cl_data_to_dev(client_data), "Reset Failed\n");
587                 up_write(&init_lock);
588                 return;
589         }
590
591         /* Refresh ec_dev device pointers */
592         client_data->ec_dev->priv = client_data->cros_ish_cl;
593         dev = cl_data_to_dev(client_data);
594         dev->driver_data = client_data->ec_dev;
595
596         dev_info(cl_data_to_dev(client_data), "Chrome EC ISH reset done\n");
597
598         up_write(&init_lock);
599 }
600
601 /**
602  * cros_ec_ishtp_probe() - ISHTP client driver probe callback
603  * @cl_device: ISHTP client device instance
604  *
605  * Return: 0 for success, negative error code for failure.
606  */
607 static int cros_ec_ishtp_probe(struct ishtp_cl_device *cl_device)
608 {
609         int rv;
610         struct ishtp_cl *cros_ish_cl;
611         struct ishtp_cl_data *client_data =
612                 devm_kzalloc(ishtp_device(cl_device),
613                              sizeof(*client_data), GFP_KERNEL);
614         if (!client_data)
615                 return -ENOMEM;
616
617         /* Lock for initialization to complete */
618         down_write(&init_lock);
619
620         cros_ish_cl = ishtp_cl_allocate(cl_device);
621         if (!cros_ish_cl) {
622                 rv = -ENOMEM;
623                 goto end_ishtp_cl_alloc_error;
624         }
625
626         ishtp_set_drvdata(cl_device, cros_ish_cl);
627         ishtp_set_client_data(cros_ish_cl, client_data);
628         client_data->cros_ish_cl = cros_ish_cl;
629         client_data->cl_device = cl_device;
630
631         init_waitqueue_head(&client_data->response.wait_queue);
632
633         INIT_WORK(&client_data->work_ishtp_reset,
634                   reset_handler);
635         INIT_WORK(&client_data->work_ec_evt,
636                   ish_evt_handler);
637
638         rv = cros_ish_init(cros_ish_cl);
639         if (rv)
640                 goto end_ishtp_cl_init_error;
641
642         ishtp_get_device(cl_device);
643
644         up_write(&init_lock);
645
646         /* Register croc_ec_dev mfd */
647         rv = cros_ec_dev_init(client_data);
648         if (rv)
649                 goto end_cros_ec_dev_init_error;
650
651         return 0;
652
653 end_cros_ec_dev_init_error:
654         ishtp_set_connection_state(cros_ish_cl, ISHTP_CL_DISCONNECTING);
655         ishtp_cl_disconnect(cros_ish_cl);
656         ishtp_cl_unlink(cros_ish_cl);
657         ishtp_cl_flush_queues(cros_ish_cl);
658         ishtp_put_device(cl_device);
659 end_ishtp_cl_init_error:
660         ishtp_cl_free(cros_ish_cl);
661 end_ishtp_cl_alloc_error:
662         up_write(&init_lock);
663         return rv;
664 }
665
666 /**
667  * cros_ec_ishtp_remove() - ISHTP client driver remove callback
668  * @cl_device: ISHTP client device instance
669  *
670  * Return: 0
671  */
672 static int cros_ec_ishtp_remove(struct ishtp_cl_device *cl_device)
673 {
674         struct ishtp_cl *cros_ish_cl = ishtp_get_drvdata(cl_device);
675         struct ishtp_cl_data *client_data = ishtp_get_client_data(cros_ish_cl);
676
677         cancel_work_sync(&client_data->work_ishtp_reset);
678         cancel_work_sync(&client_data->work_ec_evt);
679         cros_ish_deinit(cros_ish_cl);
680         ishtp_put_device(cl_device);
681
682         return 0;
683 }
684
685 /**
686  * cros_ec_ishtp_reset() - ISHTP client driver reset callback
687  * @cl_device: ISHTP client device instance
688  *
689  * Return: 0
690  */
691 static int cros_ec_ishtp_reset(struct ishtp_cl_device *cl_device)
692 {
693         struct ishtp_cl *cros_ish_cl = ishtp_get_drvdata(cl_device);
694         struct ishtp_cl_data *client_data = ishtp_get_client_data(cros_ish_cl);
695
696         schedule_work(&client_data->work_ishtp_reset);
697
698         return 0;
699 }
700
701 /**
702  * cros_ec_ishtp_suspend() - ISHTP client driver suspend callback
703  * @device: device instance
704  *
705  * Return: 0 for success, negative error code for failure.
706  */
707 static int __maybe_unused cros_ec_ishtp_suspend(struct device *device)
708 {
709         struct ishtp_cl_device *cl_device = ishtp_dev_to_cl_device(device);
710         struct ishtp_cl *cros_ish_cl = ishtp_get_drvdata(cl_device);
711         struct ishtp_cl_data *client_data = ishtp_get_client_data(cros_ish_cl);
712
713         return cros_ec_suspend(client_data->ec_dev);
714 }
715
716 /**
717  * cros_ec_ishtp_resume() - ISHTP client driver resume callback
718  * @device: device instance
719  *
720  * Return: 0 for success, negative error code for failure.
721  */
722 static int __maybe_unused cros_ec_ishtp_resume(struct device *device)
723 {
724         struct ishtp_cl_device *cl_device = ishtp_dev_to_cl_device(device);
725         struct ishtp_cl *cros_ish_cl = ishtp_get_drvdata(cl_device);
726         struct ishtp_cl_data *client_data = ishtp_get_client_data(cros_ish_cl);
727
728         return cros_ec_resume(client_data->ec_dev);
729 }
730
731 static SIMPLE_DEV_PM_OPS(cros_ec_ishtp_pm_ops, cros_ec_ishtp_suspend,
732                          cros_ec_ishtp_resume);
733
734 static struct ishtp_cl_driver   cros_ec_ishtp_driver = {
735         .name = "cros_ec_ishtp",
736         .guid = &cros_ish_guid,
737         .probe = cros_ec_ishtp_probe,
738         .remove = cros_ec_ishtp_remove,
739         .reset = cros_ec_ishtp_reset,
740         .driver = {
741                 .pm = &cros_ec_ishtp_pm_ops,
742         },
743 };
744
745 static int __init cros_ec_ishtp_mod_init(void)
746 {
747         return ishtp_cl_driver_register(&cros_ec_ishtp_driver, THIS_MODULE);
748 }
749
750 static void __exit cros_ec_ishtp_mod_exit(void)
751 {
752         ishtp_cl_driver_unregister(&cros_ec_ishtp_driver);
753 }
754
755 module_init(cros_ec_ishtp_mod_init);
756 module_exit(cros_ec_ishtp_mod_exit);
757
758 MODULE_DESCRIPTION("ChromeOS EC ISHTP Client Driver");
759 MODULE_AUTHOR("Rushikesh S Kadam <[email protected]>");
760
761 MODULE_LICENSE("GPL v2");
762 MODULE_ALIAS("ishtp:*");
This page took 0.075523 seconds and 4 git commands to generate.