drivers/usb/host/xhci-pci.c

   1 // SPDX-License-Identifier: GPL-2.0
   2 /*
   3  * xHCI host controller driver PCI Bus Glue.
   4  *
   5  * Copyright (C) 2008 Intel Corp.
   6  *
   7  * Author: Sarah Sharp
   8  * Some code borrowed from the Linux EHCI driver.
   9  */
  10
  11 #include <linux/pci.h>
  12 #include <linux/slab.h>
  13 #include <linux/module.h>
  14 #include <linux/acpi.h>
  15 #include <linux/reset.h>
  16
  17 #include "xhci.h"
  18 #include "xhci-trace.h"
  19 #include "xhci-pci.h"
  20
  21 #define SSIC_PORT_NUM           2
  22 #define SSIC_PORT_CFG2          0x880c
  23 #define SSIC_PORT_CFG2_OFFSET   0x30
  24 #define PROG_DONE               (1 << 30)
  25 #define SSIC_PORT_UNUSED        (1 << 31)
  26 #define SPARSE_DISABLE_BIT      17
  27 #define SPARSE_CNTL_ENABLE      0xC12C
  28
  29 /* Device for a quirk */
  30 #define PCI_VENDOR_ID_FRESCO_LOGIC      0x1b73
  31 #define PCI_DEVICE_ID_FRESCO_LOGIC_PDK  0x1000
  32 #define PCI_DEVICE_ID_FRESCO_LOGIC_FL1009       0x1009
  33 #define PCI_DEVICE_ID_FRESCO_LOGIC_FL1100       0x1100
  34 #define PCI_DEVICE_ID_FRESCO_LOGIC_FL1400       0x1400
  35
  36 #define PCI_VENDOR_ID_ETRON             0x1b6f
  37 #define PCI_DEVICE_ID_EJ168             0x7023
  38
  39 #define PCI_DEVICE_ID_INTEL_LYNXPOINT_XHCI      0x8c31
  40 #define PCI_DEVICE_ID_INTEL_LYNXPOINT_LP_XHCI   0x9c31
  41 #define PCI_DEVICE_ID_INTEL_WILDCATPOINT_LP_XHCI        0x9cb1
  42 #define PCI_DEVICE_ID_INTEL_CHERRYVIEW_XHCI             0x22b5
  43 #define PCI_DEVICE_ID_INTEL_SUNRISEPOINT_H_XHCI         0xa12f
  44 #define PCI_DEVICE_ID_INTEL_SUNRISEPOINT_LP_XHCI        0x9d2f
  45 #define PCI_DEVICE_ID_INTEL_BROXTON_M_XHCI              0x0aa8
  46 #define PCI_DEVICE_ID_INTEL_BROXTON_B_XHCI              0x1aa8
  47 #define PCI_DEVICE_ID_INTEL_APL_XHCI                    0x5aa8
  48 #define PCI_DEVICE_ID_INTEL_DNV_XHCI                    0x19d0
  49 #define PCI_DEVICE_ID_INTEL_ALPINE_RIDGE_2C_XHCI        0x15b5
  50 #define PCI_DEVICE_ID_INTEL_ALPINE_RIDGE_4C_XHCI        0x15b6
  51 #define PCI_DEVICE_ID_INTEL_ALPINE_RIDGE_LP_XHCI        0x15c1
  52 #define PCI_DEVICE_ID_INTEL_ALPINE_RIDGE_C_2C_XHCI      0x15db
  53 #define PCI_DEVICE_ID_INTEL_ALPINE_RIDGE_C_4C_XHCI      0x15d4
  54 #define PCI_DEVICE_ID_INTEL_TITAN_RIDGE_2C_XHCI         0x15e9
  55 #define PCI_DEVICE_ID_INTEL_TITAN_RIDGE_4C_XHCI         0x15ec
  56 #define PCI_DEVICE_ID_INTEL_TITAN_RIDGE_DD_XHCI         0x15f0
  57 #define PCI_DEVICE_ID_INTEL_ICE_LAKE_XHCI               0x8a13
  58 #define PCI_DEVICE_ID_INTEL_CML_XHCI                    0xa3af
  59 #define PCI_DEVICE_ID_INTEL_TIGER_LAKE_XHCI             0x9a13
  60 #define PCI_DEVICE_ID_INTEL_MAPLE_RIDGE_XHCI            0x1138
  61 #define PCI_DEVICE_ID_INTEL_ALDER_LAKE_XHCI             0x461e
  62 #define PCI_DEVICE_ID_INTEL_ALDER_LAKE_N_XHCI           0x464e
  63 #define PCI_DEVICE_ID_INTEL_ALDER_LAKE_PCH_XHCI 0x51ed
  64 #define PCI_DEVICE_ID_INTEL_RAPTOR_LAKE_XHCI            0xa71e
  65 #define PCI_DEVICE_ID_INTEL_METEOR_LAKE_XHCI            0x7ec0
  66
  67 #define PCI_DEVICE_ID_AMD_RENOIR_XHCI                   0x1639
  68 #define PCI_DEVICE_ID_AMD_PROMONTORYA_4                 0x43b9
  69 #define PCI_DEVICE_ID_AMD_PROMONTORYA_3                 0x43ba
  70 #define PCI_DEVICE_ID_AMD_PROMONTORYA_2                 0x43bb
  71 #define PCI_DEVICE_ID_AMD_PROMONTORYA_1                 0x43bc
  72 #define PCI_DEVICE_ID_AMD_YELLOW_CARP_XHCI_1            0x161a
  73 #define PCI_DEVICE_ID_AMD_YELLOW_CARP_XHCI_2            0x161b
  74 #define PCI_DEVICE_ID_AMD_YELLOW_CARP_XHCI_3            0x161d
  75 #define PCI_DEVICE_ID_AMD_YELLOW_CARP_XHCI_4            0x161e
  76 #define PCI_DEVICE_ID_AMD_YELLOW_CARP_XHCI_5            0x15d6
  77 #define PCI_DEVICE_ID_AMD_YELLOW_CARP_XHCI_6            0x15d7
  78 #define PCI_DEVICE_ID_AMD_YELLOW_CARP_XHCI_7            0x161c
  79 #define PCI_DEVICE_ID_AMD_YELLOW_CARP_XHCI_8            0x161f
  80
  81 #define PCI_DEVICE_ID_ASMEDIA_1042_XHCI                 0x1042
  82 #define PCI_DEVICE_ID_ASMEDIA_1042A_XHCI                0x1142
  83 #define PCI_DEVICE_ID_ASMEDIA_1142_XHCI                 0x1242
  84 #define PCI_DEVICE_ID_ASMEDIA_2142_XHCI                 0x2142
  85 #define PCI_DEVICE_ID_ASMEDIA_3242_XHCI                 0x3242
  86
  87 static const char hcd_name[] = "xhci_hcd";
  88
  89 static struct hc_driver __read_mostly xhci_pci_hc_driver;
  90
  91 static int xhci_pci_setup(struct usb_hcd *hcd);
  92
  93 static const struct xhci_driver_overrides xhci_pci_overrides __initconst = {
  94         .reset = xhci_pci_setup,
  95 };
  96
  97 /* called after powerup, by probe or system-pm "wakeup" */
  98 static int xhci_pci_reinit(struct xhci_hcd *xhci, struct pci_dev *pdev)
  99 {
 100         /*
 101          * TODO: Implement finding debug ports later.
 102          * TODO: see if there are any quirks that need to be added to handle
 103          * new extended capabilities.
 104          */
 105
 106         /* PCI Memory-Write-Invalidate cycle support is optional (uncommon) */
 107         if (!pci_set_mwi(pdev))
 108                 xhci_dbg(xhci, "MWI active\n");
 109
 110         xhci_dbg(xhci, "Finished xhci_pci_reinit\n");
 111         return 0;
 112 }
 113
 114 static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci)
 115 {
 116         struct pci_dev                  *pdev = to_pci_dev(dev);
 117         struct xhci_driver_data         *driver_data;
 118         const struct pci_device_id      *id;
 119
 120         id = pci_match_id(to_pci_driver(pdev->dev.driver)->id_table, pdev);
 121
 122         if (id && id->driver_data) {
 123                 driver_data = (struct xhci_driver_data *)id->driver_data;
 124                 xhci->quirks |= driver_data->quirks;
 125         }
 126
 127         /* Look for vendor-specific quirks */
 128         if (pdev->vendor == PCI_VENDOR_ID_FRESCO_LOGIC &&
 129                         (pdev->device == PCI_DEVICE_ID_FRESCO_LOGIC_PDK ||
 130                          pdev->device == PCI_DEVICE_ID_FRESCO_LOGIC_FL1400)) {
 131                 if (pdev->device == PCI_DEVICE_ID_FRESCO_LOGIC_PDK &&
 132                                 pdev->revision == 0x0) {
 133                         xhci->quirks |= XHCI_RESET_EP_QUIRK;
 134                         xhci_dbg_trace(xhci, trace_xhci_dbg_quirks,
 135                                 "XHCI_RESET_EP_QUIRK for this evaluation HW is deprecated");
 136                 }
 137                 if (pdev->device == PCI_DEVICE_ID_FRESCO_LOGIC_PDK &&
 138                                 pdev->revision == 0x4) {
 139                         xhci->quirks |= XHCI_SLOW_SUSPEND;
 140                         xhci_dbg_trace(xhci, trace_xhci_dbg_quirks,
 141                                 "QUIRK: Fresco Logic xHC revision %u"
 142                                 "must be suspended extra slowly",
 143                                 pdev->revision);
 144                 }
 145                 if (pdev->device == PCI_DEVICE_ID_FRESCO_LOGIC_PDK)
 146                         xhci->quirks |= XHCI_BROKEN_STREAMS;
 147                 /* Fresco Logic confirms: all revisions of this chip do not
 148                  * support MSI, even though some of them claim to in their PCI
 149                  * capabilities.
 150                  */
 151                 xhci->quirks |= XHCI_BROKEN_MSI;
 152                 xhci_dbg_trace(xhci, trace_xhci_dbg_quirks,
 153                                 "QUIRK: Fresco Logic revision %u "
 154                                 "has broken MSI implementation",
 155                                 pdev->revision);
 156                 xhci->quirks |= XHCI_TRUST_TX_LENGTH;
 157         }
 158
 159         if (pdev->vendor == PCI_VENDOR_ID_FRESCO_LOGIC &&
 160                         pdev->device == PCI_DEVICE_ID_FRESCO_LOGIC_FL1009)
 161                 xhci->quirks |= XHCI_BROKEN_STREAMS;
 162
 163         if (pdev->vendor == PCI_VENDOR_ID_FRESCO_LOGIC &&
 164                         pdev->device == PCI_DEVICE_ID_FRESCO_LOGIC_FL1100)
 165                 xhci->quirks |= XHCI_TRUST_TX_LENGTH;
 166
 167         if (pdev->vendor == PCI_VENDOR_ID_NEC)
 168                 xhci->quirks |= XHCI_NEC_HOST;
 169
 170         if (pdev->vendor == PCI_VENDOR_ID_AMD && xhci->hci_version == 0x96)
 171                 xhci->quirks |= XHCI_AMD_0x96_HOST;
 172
 173         /* AMD PLL quirk */
 174         if (pdev->vendor == PCI_VENDOR_ID_AMD && usb_amd_quirk_pll_check())
 175                 xhci->quirks |= XHCI_AMD_PLL_FIX;
 176
 177         if (pdev->vendor == PCI_VENDOR_ID_AMD &&
 178                 (pdev->device == 0x145c ||
 179                  pdev->device == 0x15e0 ||
 180                  pdev->device == 0x15e1 ||
 181                  pdev->device == 0x43bb))
 182                 xhci->quirks |= XHCI_SUSPEND_DELAY;
 183
 184         if (pdev->vendor == PCI_VENDOR_ID_AMD &&
 185             (pdev->device == 0x15e0 || pdev->device == 0x15e1))
 186                 xhci->quirks |= XHCI_SNPS_BROKEN_SUSPEND;
 187
 188         if (pdev->vendor == PCI_VENDOR_ID_AMD && pdev->device == 0x15e5) {
 189                 xhci->quirks |= XHCI_DISABLE_SPARSE;
 190                 xhci->quirks |= XHCI_RESET_ON_RESUME;
 191         }
 192
 193         if (pdev->vendor == PCI_VENDOR_ID_AMD)
 194                 xhci->quirks |= XHCI_TRUST_TX_LENGTH;
 195
 196         if ((pdev->vendor == PCI_VENDOR_ID_AMD) &&
 197                 ((pdev->device == PCI_DEVICE_ID_AMD_PROMONTORYA_4) ||
 198                 (pdev->device == PCI_DEVICE_ID_AMD_PROMONTORYA_3) ||
 199                 (pdev->device == PCI_DEVICE_ID_AMD_PROMONTORYA_2) ||
 200                 (pdev->device == PCI_DEVICE_ID_AMD_PROMONTORYA_1)))
 201                 xhci->quirks |= XHCI_U2_DISABLE_WAKE;
 202
 203         if (pdev->vendor == PCI_VENDOR_ID_AMD &&
 204                 pdev->device == PCI_DEVICE_ID_AMD_RENOIR_XHCI)
 205                 xhci->quirks |= XHCI_BROKEN_D3COLD;
 206
 207         if (pdev->vendor == PCI_VENDOR_ID_INTEL) {
 208                 xhci->quirks |= XHCI_LPM_SUPPORT;
 209                 xhci->quirks |= XHCI_INTEL_HOST;
 210                 xhci->quirks |= XHCI_AVOID_BEI;
 211         }
 212         if (pdev->vendor == PCI_VENDOR_ID_INTEL &&
 213                         pdev->device == PCI_DEVICE_ID_INTEL_PANTHERPOINT_XHCI) {
 214                 xhci->quirks |= XHCI_EP_LIMIT_QUIRK;
 215                 xhci->limit_active_eps = 64;
 216                 xhci->quirks |= XHCI_SW_BW_CHECKING;
 217                 /*
 218                  * PPT desktop boards DH77EB and DH77DF will power back on after
 219                  * a few seconds of being shutdown.  The fix for this is to
 220                  * switch the ports from xHCI to EHCI on shutdown.  We can't use
 221                  * DMI information to find those particular boards (since each
 222                  * vendor will change the board name), so we have to key off all
 223                  * PPT chipsets.
 224                  */
 225                 xhci->quirks |= XHCI_SPURIOUS_REBOOT;
 226         }
 227         if (pdev->vendor == PCI_VENDOR_ID_INTEL &&
 228                 (pdev->device == PCI_DEVICE_ID_INTEL_LYNXPOINT_LP_XHCI ||
 229                  pdev->device == PCI_DEVICE_ID_INTEL_WILDCATPOINT_LP_XHCI)) {
 230                 xhci->quirks |= XHCI_SPURIOUS_REBOOT;
 231                 xhci->quirks |= XHCI_SPURIOUS_WAKEUP;
 232         }
 233         if (pdev->vendor == PCI_VENDOR_ID_INTEL &&
 234                 (pdev->device == PCI_DEVICE_ID_INTEL_SUNRISEPOINT_LP_XHCI ||
 235                  pdev->device == PCI_DEVICE_ID_INTEL_SUNRISEPOINT_H_XHCI ||
 236                  pdev->device == PCI_DEVICE_ID_INTEL_CHERRYVIEW_XHCI ||
 237                  pdev->device == PCI_DEVICE_ID_INTEL_BROXTON_M_XHCI ||
 238                  pdev->device == PCI_DEVICE_ID_INTEL_BROXTON_B_XHCI ||
 239                  pdev->device == PCI_DEVICE_ID_INTEL_APL_XHCI ||
 240                  pdev->device == PCI_DEVICE_ID_INTEL_DNV_XHCI ||
 241                  pdev->device == PCI_DEVICE_ID_INTEL_CML_XHCI)) {
 242                 xhci->quirks |= XHCI_PME_STUCK_QUIRK;
 243         }
 244         if (pdev->vendor == PCI_VENDOR_ID_INTEL &&
 245             pdev->device == PCI_DEVICE_ID_INTEL_CHERRYVIEW_XHCI)
 246                 xhci->quirks |= XHCI_SSIC_PORT_UNUSED;
 247         if (pdev->vendor == PCI_VENDOR_ID_INTEL &&
 248             (pdev->device == PCI_DEVICE_ID_INTEL_CHERRYVIEW_XHCI ||
 249              pdev->device == PCI_DEVICE_ID_INTEL_SUNRISEPOINT_LP_XHCI ||
 250              pdev->device == PCI_DEVICE_ID_INTEL_APL_XHCI))
 251                 xhci->quirks |= XHCI_INTEL_USB_ROLE_SW;
 252         if (pdev->vendor == PCI_VENDOR_ID_INTEL &&
 253             (pdev->device == PCI_DEVICE_ID_INTEL_CHERRYVIEW_XHCI ||
 254              pdev->device == PCI_DEVICE_ID_INTEL_SUNRISEPOINT_LP_XHCI ||
 255              pdev->device == PCI_DEVICE_ID_INTEL_SUNRISEPOINT_H_XHCI ||
 256              pdev->device == PCI_DEVICE_ID_INTEL_APL_XHCI ||
 257              pdev->device == PCI_DEVICE_ID_INTEL_DNV_XHCI))
 258                 xhci->quirks |= XHCI_MISSING_CAS;
 259
 260         if (pdev->vendor == PCI_VENDOR_ID_INTEL &&
 261             (pdev->device == PCI_DEVICE_ID_INTEL_ALPINE_RIDGE_2C_XHCI ||
 262              pdev->device == PCI_DEVICE_ID_INTEL_ALPINE_RIDGE_4C_XHCI ||
 263              pdev->device == PCI_DEVICE_ID_INTEL_ALPINE_RIDGE_LP_XHCI ||
 264              pdev->device == PCI_DEVICE_ID_INTEL_ALPINE_RIDGE_C_2C_XHCI ||
 265              pdev->device == PCI_DEVICE_ID_INTEL_ALPINE_RIDGE_C_4C_XHCI ||
 266              pdev->device == PCI_DEVICE_ID_INTEL_TITAN_RIDGE_2C_XHCI ||
 267              pdev->device == PCI_DEVICE_ID_INTEL_TITAN_RIDGE_4C_XHCI ||
 268              pdev->device == PCI_DEVICE_ID_INTEL_TITAN_RIDGE_DD_XHCI ||
 269              pdev->device == PCI_DEVICE_ID_INTEL_ICE_LAKE_XHCI ||
 270              pdev->device == PCI_DEVICE_ID_INTEL_TIGER_LAKE_XHCI ||
 271              pdev->device == PCI_DEVICE_ID_INTEL_MAPLE_RIDGE_XHCI ||
 272              pdev->device == PCI_DEVICE_ID_INTEL_ALDER_LAKE_XHCI ||
 273              pdev->device == PCI_DEVICE_ID_INTEL_ALDER_LAKE_N_XHCI ||
 274              pdev->device == PCI_DEVICE_ID_INTEL_ALDER_LAKE_PCH_XHCI ||
 275              pdev->device == PCI_DEVICE_ID_INTEL_RAPTOR_LAKE_XHCI ||
 276              pdev->device == PCI_DEVICE_ID_INTEL_METEOR_LAKE_XHCI))
 277                 xhci->quirks |= XHCI_DEFAULT_PM_RUNTIME_ALLOW;
 278
 279         if (pdev->vendor == PCI_VENDOR_ID_ETRON &&
 280                         pdev->device == PCI_DEVICE_ID_EJ168) {
 281                 xhci->quirks |= XHCI_RESET_ON_RESUME;
 282                 xhci->quirks |= XHCI_TRUST_TX_LENGTH;
 283                 xhci->quirks |= XHCI_BROKEN_STREAMS;
 284         }
 285         if (pdev->vendor == PCI_VENDOR_ID_RENESAS &&
 286             pdev->device == 0x0014) {
 287                 xhci->quirks |= XHCI_TRUST_TX_LENGTH;
 288                 xhci->quirks |= XHCI_ZERO_64B_REGS;
 289         }
 290         if (pdev->vendor == PCI_VENDOR_ID_RENESAS &&
 291             pdev->device == 0x0015) {
 292                 xhci->quirks |= XHCI_RESET_ON_RESUME;
 293                 xhci->quirks |= XHCI_ZERO_64B_REGS;
 294         }
 295         if (pdev->vendor == PCI_VENDOR_ID_VIA)
 296                 xhci->quirks |= XHCI_RESET_ON_RESUME;
 297
 298         /* See https://bugzilla.kernel.org/show_bug.cgi?id=79511 */
 299         if (pdev->vendor == PCI_VENDOR_ID_VIA &&
 300                         pdev->device == 0x3432)
 301                 xhci->quirks |= XHCI_BROKEN_STREAMS;
 302
 303         if (pdev->vendor == PCI_VENDOR_ID_VIA && pdev->device == 0x3483) {
 304                 xhci->quirks |= XHCI_LPM_SUPPORT;
 305                 xhci->quirks |= XHCI_EP_CTX_BROKEN_DCS;
 306         }
 307
 308         if (pdev->vendor == PCI_VENDOR_ID_ASMEDIA &&
 309                 pdev->device == PCI_DEVICE_ID_ASMEDIA_1042_XHCI)
 310                 xhci->quirks |= XHCI_BROKEN_STREAMS;
 311         if (pdev->vendor == PCI_VENDOR_ID_ASMEDIA &&
 312                 pdev->device == PCI_DEVICE_ID_ASMEDIA_1042A_XHCI) {
 313                 xhci->quirks |= XHCI_TRUST_TX_LENGTH;
 314                 xhci->quirks |= XHCI_NO_64BIT_SUPPORT;
 315         }
 316         if (pdev->vendor == PCI_VENDOR_ID_ASMEDIA &&
 317             (pdev->device == PCI_DEVICE_ID_ASMEDIA_1142_XHCI ||
 318              pdev->device == PCI_DEVICE_ID_ASMEDIA_2142_XHCI ||
 319              pdev->device == PCI_DEVICE_ID_ASMEDIA_3242_XHCI))
 320                 xhci->quirks |= XHCI_NO_64BIT_SUPPORT;
 321
 322         if (pdev->vendor == PCI_VENDOR_ID_ASMEDIA &&
 323                 pdev->device == PCI_DEVICE_ID_ASMEDIA_1042A_XHCI)
 324                 xhci->quirks |= XHCI_ASMEDIA_MODIFY_FLOWCONTROL;
 325
 326         if (pdev->vendor == PCI_VENDOR_ID_TI && pdev->device == 0x8241)
 327                 xhci->quirks |= XHCI_LIMIT_ENDPOINT_INTERVAL_7;
 328
 329         if ((pdev->vendor == PCI_VENDOR_ID_BROADCOM ||
 330              pdev->vendor == PCI_VENDOR_ID_CAVIUM) &&
 331              pdev->device == 0x9026)
 332                 xhci->quirks |= XHCI_RESET_PLL_ON_DISCONNECT;
 333
 334         if (pdev->vendor == PCI_VENDOR_ID_AMD &&
 335             (pdev->device == PCI_DEVICE_ID_AMD_PROMONTORYA_2 ||
 336              pdev->device == PCI_DEVICE_ID_AMD_PROMONTORYA_4))
 337                 xhci->quirks |= XHCI_NO_SOFT_RETRY;
 338
 339         if (pdev->vendor == PCI_VENDOR_ID_AMD &&
 340             (pdev->device == PCI_DEVICE_ID_AMD_YELLOW_CARP_XHCI_1 ||
 341             pdev->device == PCI_DEVICE_ID_AMD_YELLOW_CARP_XHCI_2 ||
 342             pdev->device == PCI_DEVICE_ID_AMD_YELLOW_CARP_XHCI_3 ||
 343             pdev->device == PCI_DEVICE_ID_AMD_YELLOW_CARP_XHCI_4 ||
 344             pdev->device == PCI_DEVICE_ID_AMD_YELLOW_CARP_XHCI_5 ||
 345             pdev->device == PCI_DEVICE_ID_AMD_YELLOW_CARP_XHCI_6 ||
 346             pdev->device == PCI_DEVICE_ID_AMD_YELLOW_CARP_XHCI_7 ||
 347             pdev->device == PCI_DEVICE_ID_AMD_YELLOW_CARP_XHCI_8))
 348                 xhci->quirks |= XHCI_DEFAULT_PM_RUNTIME_ALLOW;
 349
 350         if (xhci->quirks & XHCI_RESET_ON_RESUME)
 351                 xhci_dbg_trace(xhci, trace_xhci_dbg_quirks,
 352                                 "QUIRK: Resetting on resume");
 353 }
 354
 355 #ifdef CONFIG_ACPI
 356 static void xhci_pme_acpi_rtd3_enable(struct pci_dev *dev)
 357 {
 358         static const guid_t intel_dsm_guid =
 359                 GUID_INIT(0xac340cb7, 0xe901, 0x45bf,
 360                           0xb7, 0xe6, 0x2b, 0x34, 0xec, 0x93, 0x1e, 0x23);
 361         union acpi_object *obj;
 362
 363         obj = acpi_evaluate_dsm(ACPI_HANDLE(&dev->dev), &intel_dsm_guid, 3, 1,
 364                                 NULL);
 365         ACPI_FREE(obj);
 366 }
 367 #else
 368 static void xhci_pme_acpi_rtd3_enable(struct pci_dev *dev) { }
 369 #endif /* CONFIG_ACPI */
 370
 371 /* called during probe() after chip reset completes */
 372 static int xhci_pci_setup(struct usb_hcd *hcd)
 373 {
 374         struct xhci_hcd         *xhci;
 375         struct pci_dev          *pdev = to_pci_dev(hcd->self.controller);
 376         int                     retval;
 377
 378         xhci = hcd_to_xhci(hcd);
 379         if (!xhci->sbrn)
 380                 pci_read_config_byte(pdev, XHCI_SBRN_OFFSET, &xhci->sbrn);
 381
 382         /* imod_interval is the interrupt moderation value in nanoseconds. */
 383         xhci->imod_interval = 40000;
 384
 385         retval = xhci_gen_setup(hcd, xhci_pci_quirks);
 386         if (retval)
 387                 return retval;
 388
 389         if (!usb_hcd_is_primary_hcd(hcd))
 390                 return 0;
 391
 392         if (xhci->quirks & XHCI_PME_STUCK_QUIRK)
 393                 xhci_pme_acpi_rtd3_enable(pdev);
 394
 395         xhci_dbg(xhci, "Got SBRN %u\n", (unsigned int) xhci->sbrn);
 396
 397         /* Find any debug ports */
 398         return xhci_pci_reinit(xhci, pdev);
 399 }
 400
 401 /*
 402  * We need to register our own PCI probe function (instead of the USB core's
 403  * function) in order to create a second roothub under xHCI.
 404  */
 405 static int xhci_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
 406 {
 407         int retval;
 408         struct xhci_hcd *xhci;
 409         struct usb_hcd *hcd;
 410         struct xhci_driver_data *driver_data;
 411         struct reset_control *reset;
 412
 413         driver_data = (struct xhci_driver_data *)id->driver_data;
 414         if (driver_data && driver_data->quirks & XHCI_RENESAS_FW_QUIRK) {
 415                 retval = renesas_xhci_check_request_fw(dev, id);
 416                 if (retval)
 417                         return retval;
 418         }
 419
 420         reset = devm_reset_control_get_optional_exclusive(&dev->dev, NULL);
 421         if (IS_ERR(reset))
 422                 return PTR_ERR(reset);
 423         reset_control_reset(reset);
 424
 425         /* Prevent runtime suspending between USB-2 and USB-3 initialization */
 426         pm_runtime_get_noresume(&dev->dev);
 427
 428         /* Register the USB 2.0 roothub.
 429          * FIXME: USB core must know to register the USB 2.0 roothub first.
 430          * This is sort of silly, because we could just set the HCD driver flags
 431          * to say USB 2.0, but I'm not sure what the implications would be in
 432          * the other parts of the HCD code.
 433          */
 434         retval = usb_hcd_pci_probe(dev, id, &xhci_pci_hc_driver);
 435
 436         if (retval)
 437                 goto put_runtime_pm;
 438
 439         /* USB 2.0 roothub is stored in the PCI device now. */
 440         hcd = dev_get_drvdata(&dev->dev);
 441         xhci = hcd_to_xhci(hcd);
 442         xhci->reset = reset;
 443         xhci->shared_hcd = usb_create_shared_hcd(&xhci_pci_hc_driver, &dev->dev,
 444                                                  pci_name(dev), hcd);
 445         if (!xhci->shared_hcd) {
 446                 retval = -ENOMEM;
 447                 goto dealloc_usb2_hcd;
 448         }
 449
 450         retval = xhci_ext_cap_init(xhci);
 451         if (retval)
 452                 goto put_usb3_hcd;
 453
 454         retval = usb_add_hcd(xhci->shared_hcd, dev->irq,
 455                         IRQF_SHARED);
 456         if (retval)
 457                 goto put_usb3_hcd;
 458         /* Roothub already marked as USB 3.0 speed */
 459
 460         if (!(xhci->quirks & XHCI_BROKEN_STREAMS) &&
 461                         HCC_MAX_PSA(xhci->hcc_params) >= 4)
 462                 xhci->shared_hcd->can_do_streams = 1;
 463
 464         /* USB-2 and USB-3 roothubs initialized, allow runtime pm suspend */
 465         pm_runtime_put_noidle(&dev->dev);
 466
 467         if (xhci->quirks & XHCI_DEFAULT_PM_RUNTIME_ALLOW)
 468                 pm_runtime_allow(&dev->dev);
 469
 470         return 0;
 471
 472 put_usb3_hcd:
 473         usb_put_hcd(xhci->shared_hcd);
 474 dealloc_usb2_hcd:
 475         usb_hcd_pci_remove(dev);
 476 put_runtime_pm:
 477         pm_runtime_put_noidle(&dev->dev);
 478         return retval;
 479 }
 480
 481 static void xhci_pci_remove(struct pci_dev *dev)
 482 {
 483         struct xhci_hcd *xhci;
 484
 485         xhci = hcd_to_xhci(pci_get_drvdata(dev));
 486
 487         xhci->xhc_state |= XHCI_STATE_REMOVING;
 488
 489         if (xhci->quirks & XHCI_DEFAULT_PM_RUNTIME_ALLOW)
 490                 pm_runtime_forbid(&dev->dev);
 491
 492         if (xhci->shared_hcd) {
 493                 usb_remove_hcd(xhci->shared_hcd);
 494                 usb_put_hcd(xhci->shared_hcd);
 495                 xhci->shared_hcd = NULL;
 496         }
 497
 498         /* Workaround for spurious wakeups at shutdown with HSW */
 499         if (xhci->quirks & XHCI_SPURIOUS_WAKEUP)
 500                 pci_set_power_state(dev, PCI_D3hot);
 501
 502         usb_hcd_pci_remove(dev);
 503 }
 504
 505 #ifdef CONFIG_PM
 506 /*
 507  * In some Intel xHCI controllers, in order to get D3 working,
 508  * through a vendor specific SSIC CONFIG register at offset 0x883c,
 509  * SSIC PORT need to be marked as "unused" before putting xHCI
 510  * into D3. After D3 exit, the SSIC port need to be marked as "used".
 511  * Without this change, xHCI might not enter D3 state.
 512  */
 513 static void xhci_ssic_port_unused_quirk(struct usb_hcd *hcd, bool suspend)
 514 {
 515         struct xhci_hcd *xhci = hcd_to_xhci(hcd);
 516         u32 val;
 517         void __iomem *reg;
 518         int i;
 519
 520         for (i = 0; i < SSIC_PORT_NUM; i++) {
 521                 reg = (void __iomem *) xhci->cap_regs +
 522                                 SSIC_PORT_CFG2 +
 523                                 i * SSIC_PORT_CFG2_OFFSET;
 524
 525                 /* Notify SSIC that SSIC profile programming is not done. */
 526                 val = readl(reg) & ~PROG_DONE;
 527                 writel(val, reg);
 528
 529                 /* Mark SSIC port as unused(suspend) or used(resume) */
 530                 val = readl(reg);
 531                 if (suspend)
 532                         val |= SSIC_PORT_UNUSED;
 533                 else
 534                         val &= ~SSIC_PORT_UNUSED;
 535                 writel(val, reg);
 536
 537                 /* Notify SSIC that SSIC profile programming is done */
 538                 val = readl(reg) | PROG_DONE;
 539                 writel(val, reg);
 540                 readl(reg);
 541         }
 542 }
 543
 544 /*
 545  * Make sure PME works on some Intel xHCI controllers by writing 1 to clear
 546  * the Internal PME flag bit in vendor specific PMCTRL register at offset 0x80a4
 547  */
 548 static void xhci_pme_quirk(struct usb_hcd *hcd)
 549 {
 550         struct xhci_hcd *xhci = hcd_to_xhci(hcd);
 551         void __iomem *reg;
 552         u32 val;
 553
 554         reg = (void __iomem *) xhci->cap_regs + 0x80a4;
 555         val = readl(reg);
 556         writel(val | BIT(28), reg);
 557         readl(reg);
 558 }
 559
 560 static void xhci_sparse_control_quirk(struct usb_hcd *hcd)
 561 {
 562         u32 reg;
 563
 564         reg = readl(hcd->regs + SPARSE_CNTL_ENABLE);
 565         reg &= ~BIT(SPARSE_DISABLE_BIT);
 566         writel(reg, hcd->regs + SPARSE_CNTL_ENABLE);
 567 }
 568
 569 static int xhci_pci_suspend(struct usb_hcd *hcd, bool do_wakeup)
 570 {
 571         struct xhci_hcd *xhci = hcd_to_xhci(hcd);
 572         struct pci_dev          *pdev = to_pci_dev(hcd->self.controller);
 573         int                     ret;
 574
 575         /*
 576          * Systems with the TI redriver that loses port status change events
 577          * need to have the registers polled during D3, so avoid D3cold.
 578          */
 579         if (xhci->quirks & (XHCI_COMP_MODE_QUIRK | XHCI_BROKEN_D3COLD))
 580                 pci_d3cold_disable(pdev);
 581
 582         if (xhci->quirks & XHCI_PME_STUCK_QUIRK)
 583                 xhci_pme_quirk(hcd);
 584
 585         if (xhci->quirks & XHCI_SSIC_PORT_UNUSED)
 586                 xhci_ssic_port_unused_quirk(hcd, true);
 587
 588         if (xhci->quirks & XHCI_DISABLE_SPARSE)
 589                 xhci_sparse_control_quirk(hcd);
 590
 591         ret = xhci_suspend(xhci, do_wakeup);
 592         if (ret && (xhci->quirks & XHCI_SSIC_PORT_UNUSED))
 593                 xhci_ssic_port_unused_quirk(hcd, false);
 594
 595         return ret;
 596 }
 597
 598 static int xhci_pci_resume(struct usb_hcd *hcd, bool hibernated)
 599 {
 600         struct xhci_hcd         *xhci = hcd_to_xhci(hcd);
 601         struct pci_dev          *pdev = to_pci_dev(hcd->self.controller);
 602         int                     retval = 0;
 603
 604         reset_control_reset(xhci->reset);
 605
 606         /* The BIOS on systems with the Intel Panther Point chipset may or may
 607          * not support xHCI natively.  That means that during system resume, it
 608          * may switch the ports back to EHCI so that users can use their
 609          * keyboard to select a kernel from GRUB after resume from hibernate.
 610          *
 611          * The BIOS is supposed to remember whether the OS had xHCI ports
 612          * enabled before resume, and switch the ports back to xHCI when the
 613          * BIOS/OS semaphore is written, but we all know we can't trust BIOS
 614          * writers.
 615          *
 616          * Unconditionally switch the ports back to xHCI after a system resume.
 617          * It should not matter whether the EHCI or xHCI controller is
 618          * resumed first. It's enough to do the switchover in xHCI because
 619          * USB core won't notice anything as the hub driver doesn't start
 620          * running again until after all the devices (including both EHCI and
 621          * xHCI host controllers) have been resumed.
 622          */
 623
 624         if (pdev->vendor == PCI_VENDOR_ID_INTEL)
 625                 usb_enable_intel_xhci_ports(pdev);
 626
 627         if (xhci->quirks & XHCI_SSIC_PORT_UNUSED)
 628                 xhci_ssic_port_unused_quirk(hcd, false);
 629
 630         if (xhci->quirks & XHCI_PME_STUCK_QUIRK)
 631                 xhci_pme_quirk(hcd);
 632
 633         retval = xhci_resume(xhci, hibernated);
 634         return retval;
 635 }
 636
 637 static void xhci_pci_shutdown(struct usb_hcd *hcd)
 638 {
 639         struct xhci_hcd         *xhci = hcd_to_xhci(hcd);
 640         struct pci_dev          *pdev = to_pci_dev(hcd->self.controller);
 641
 642         xhci_shutdown(hcd);
 643
 644         /* Yet another workaround for spurious wakeups at shutdown with HSW */
 645         if (xhci->quirks & XHCI_SPURIOUS_WAKEUP)
 646                 pci_set_power_state(pdev, PCI_D3hot);
 647 }
 648 #endif /* CONFIG_PM */
 649
 650 /*-------------------------------------------------------------------------*/
 651
 652 static const struct xhci_driver_data reneses_data = {
 653         .quirks  = XHCI_RENESAS_FW_QUIRK,
 654         .firmware = "renesas_usb_fw.mem",
 655 };
 656
 657 /* PCI driver selection metadata; PCI hotplugging uses this */
 658 static const struct pci_device_id pci_ids[] = {
 659         { PCI_DEVICE(0x1912, 0x0014),
 660                 .driver_data =  (unsigned long)&reneses_data,
 661         },
 662         { PCI_DEVICE(0x1912, 0x0015),
 663                 .driver_data =  (unsigned long)&reneses_data,
 664         },
 665         /* handle any USB 3.0 xHCI controller */
 666         { PCI_DEVICE_CLASS(PCI_CLASS_SERIAL_USB_XHCI, ~0),
 667         },
 668         { /* end: all zeroes */ }
 669 };
 670 MODULE_DEVICE_TABLE(pci, pci_ids);
 671
 672 /*
 673  * Without CONFIG_USB_XHCI_PCI_RENESAS renesas_xhci_check_request_fw() won't
 674  * load firmware, so don't encumber the xhci-pci driver with it.
 675  */
 676 #if IS_ENABLED(CONFIG_USB_XHCI_PCI_RENESAS)
 677 MODULE_FIRMWARE("renesas_usb_fw.mem");
 678 #endif
 679
 680 /* pci driver glue; this is a "new style" PCI driver module */
 681 static struct pci_driver xhci_pci_driver = {
 682         .name =         hcd_name,
 683         .id_table =     pci_ids,
 684
 685         .probe =        xhci_pci_probe,
 686         .remove =       xhci_pci_remove,
 687         /* suspend and resume implemented later */
 688
 689         .shutdown =     usb_hcd_pci_shutdown,
 690 #ifdef CONFIG_PM
 691         .driver = {
 692                 .pm = &usb_hcd_pci_pm_ops
 693         },
 694 #endif
 695 };
 696
 697 static int __init xhci_pci_init(void)
 698 {
 699         xhci_init_driver(&xhci_pci_hc_driver, &xhci_pci_overrides);
 700 #ifdef CONFIG_PM
 701         xhci_pci_hc_driver.pci_suspend = xhci_pci_suspend;
 702         xhci_pci_hc_driver.pci_resume = xhci_pci_resume;
 703         xhci_pci_hc_driver.shutdown = xhci_pci_shutdown;
 704 #endif
 705         return pci_register_driver(&xhci_pci_driver);
 706 }
 707 module_init(xhci_pci_init);
 708
 709 static void __exit xhci_pci_exit(void)
 710 {
 711         pci_unregister_driver(&xhci_pci_driver);
 712 }
 713 module_exit(xhci_pci_exit);
 714
 715 MODULE_DESCRIPTION("xHCI PCI Host Controller Driver");
 716 MODULE_LICENSE("GPL");