2 * I2C access for DA9052 PMICs.
4 * Copyright(c) 2011 Dialog Semiconductor Ltd.
8 * This program is free software; you can redistribute it and/or modify
9 * it under the terms of the GNU General Public License as published by
10 * the Free Software Foundation; either version 2 of the License, or
11 * (at your option) any later version.
15 #include <linux/device.h>
16 #include <linux/module.h>
17 #include <linux/input.h>
18 #include <linux/mfd/core.h>
19 #include <linux/i2c.h>
20 #include <linux/err.h>
22 #include <linux/mfd/da9052/da9052.h>
23 #include <linux/mfd/da9052/reg.h>
27 #include <linux/of_device.h>
30 /* I2C safe register check */
31 static inline bool i2c_safe_reg(unsigned char reg)
34 case DA9052_STATUS_A_REG:
35 case DA9052_STATUS_B_REG:
36 case DA9052_STATUS_C_REG:
37 case DA9052_STATUS_D_REG:
38 case DA9052_ADC_RES_L_REG:
39 case DA9052_ADC_RES_H_REG:
40 case DA9052_VDD_RES_REG:
41 case DA9052_ICHG_AV_REG:
42 case DA9052_TBAT_RES_REG:
43 case DA9052_ADCIN4_RES_REG:
44 case DA9052_ADCIN5_RES_REG:
45 case DA9052_ADCIN6_RES_REG:
46 case DA9052_TJUNC_RES_REG:
47 case DA9052_TSI_X_MSB_REG:
48 case DA9052_TSI_Y_MSB_REG:
49 case DA9052_TSI_LSB_REG:
50 case DA9052_TSI_Z_MSB_REG:
58 * There is an issue with DA9052 and DA9053_AA/BA/BB PMIC where the PMIC
59 * gets lockup up or fails to respond following a system reset.
60 * This fix is to follow any read or write with a dummy read to a safe
63 static int da9052_i2c_fix(struct da9052 *da9052, unsigned char reg)
67 switch (da9052->chip_id) {
72 /* A dummy read to a safe register address. */
73 if (!i2c_safe_reg(reg))
74 return regmap_read(da9052->regmap,
81 * For other chips parking of I2C register
82 * to a safe place is not required.
91 * According to errata item 24, multiwrite mode should be avoided
92 * in order to prevent register data corruption after power-down.
94 static int da9052_i2c_disable_multiwrite(struct da9052 *da9052)
98 ret = regmap_read(da9052->regmap, DA9052_CONTROL_B_REG, ®_val);
102 if (!(reg_val & DA9052_CONTROL_B_WRITEMODE)) {
103 reg_val |= DA9052_CONTROL_B_WRITEMODE;
104 ret = regmap_write(da9052->regmap, DA9052_CONTROL_B_REG,
113 static const struct i2c_device_id da9052_i2c_id[] = {
115 {"da9053-aa", DA9053_AA},
116 {"da9053-ba", DA9053_BA},
117 {"da9053-bb", DA9053_BB},
118 {"da9053-bc", DA9053_BC},
123 static const struct of_device_id dialog_dt_ids[] = {
124 { .compatible = "dlg,da9052", .data = &da9052_i2c_id[0] },
125 { .compatible = "dlg,da9053-aa", .data = &da9052_i2c_id[1] },
126 { .compatible = "dlg,da9053-ba", .data = &da9052_i2c_id[2] },
127 { .compatible = "dlg,da9053-bb", .data = &da9052_i2c_id[3] },
128 { .compatible = "dlg,da9053-bc", .data = &da9052_i2c_id[4] },
133 static int da9052_i2c_probe(struct i2c_client *client,
134 const struct i2c_device_id *id)
136 struct da9052 *da9052;
139 da9052 = devm_kzalloc(&client->dev, sizeof(struct da9052), GFP_KERNEL);
143 da9052->dev = &client->dev;
144 da9052->chip_irq = client->irq;
145 da9052->fix_io = da9052_i2c_fix;
147 i2c_set_clientdata(client, da9052);
149 da9052->regmap = devm_regmap_init_i2c(client, &da9052_regmap_config);
150 if (IS_ERR(da9052->regmap)) {
151 ret = PTR_ERR(da9052->regmap);
152 dev_err(&client->dev, "Failed to allocate register map: %d\n",
157 ret = da9052_i2c_disable_multiwrite(da9052);
163 struct device_node *np = client->dev.of_node;
164 const struct of_device_id *deviceid;
166 deviceid = of_match_node(dialog_dt_ids, np);
173 dev_err(&client->dev, "id is null.\n");
177 return da9052_device_init(da9052, id->driver_data);
180 static int da9052_i2c_remove(struct i2c_client *client)
182 struct da9052 *da9052 = i2c_get_clientdata(client);
184 da9052_device_exit(da9052);
188 static struct i2c_driver da9052_i2c_driver = {
189 .probe = da9052_i2c_probe,
190 .remove = da9052_i2c_remove,
191 .id_table = da9052_i2c_id,
195 .of_match_table = dialog_dt_ids,
200 static int __init da9052_i2c_init(void)
204 ret = i2c_add_driver(&da9052_i2c_driver);
206 pr_err("DA9052 I2C registration failed %d\n", ret);
212 subsys_initcall(da9052_i2c_init);
214 static void __exit da9052_i2c_exit(void)
216 i2c_del_driver(&da9052_i2c_driver);
218 module_exit(da9052_i2c_exit);
221 MODULE_DESCRIPTION("I2C driver for Dialog DA9052 PMIC");
222 MODULE_LICENSE("GPL");