]> Git Repo - linux.git/blob - arch/arc/kernel/process.c
enetc: Migrate to PHYLINK and PCS_LYNX
[linux.git] / arch / arc / kernel / process.c
1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3  * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
4  *
5  * Amit Bhor, Kanika Nema: Codito Technologies 2004
6  */
7
8 #include <linux/errno.h>
9 #include <linux/module.h>
10 #include <linux/sched.h>
11 #include <linux/sched/task.h>
12 #include <linux/sched/task_stack.h>
13
14 #include <linux/mm.h>
15 #include <linux/fs.h>
16 #include <linux/unistd.h>
17 #include <linux/ptrace.h>
18 #include <linux/slab.h>
19 #include <linux/syscalls.h>
20 #include <linux/elf.h>
21 #include <linux/tick.h>
22
23 #include <asm/fpu.h>
24
25 SYSCALL_DEFINE1(arc_settls, void *, user_tls_data_ptr)
26 {
27         task_thread_info(current)->thr_ptr = (unsigned int)user_tls_data_ptr;
28         return 0;
29 }
30
31 /*
32  * We return the user space TLS data ptr as sys-call return code
33  * Ideally it should be copy to user.
34  * However we can cheat by the fact that some sys-calls do return
35  * absurdly high values
36  * Since the tls dat aptr is not going to be in range of 0xFFFF_xxxx
37  * it won't be considered a sys-call error
38  * and it will be loads better than copy-to-user, which is a definite
39  * D-TLB Miss
40  */
41 SYSCALL_DEFINE0(arc_gettls)
42 {
43         return task_thread_info(current)->thr_ptr;
44 }
45
46 SYSCALL_DEFINE3(arc_usr_cmpxchg, int *, uaddr, int, expected, int, new)
47 {
48         struct pt_regs *regs = current_pt_regs();
49         u32 uval;
50         int ret;
51
52         /*
53          * This is only for old cores lacking LLOCK/SCOND, which by defintion
54          * can't possibly be SMP. Thus doesn't need to be SMP safe.
55          * And this also helps reduce the overhead for serializing in
56          * the UP case
57          */
58         WARN_ON_ONCE(IS_ENABLED(CONFIG_SMP));
59
60         /* Z indicates to userspace if operation succeded */
61         regs->status32 &= ~STATUS_Z_MASK;
62
63         ret = access_ok(uaddr, sizeof(*uaddr));
64         if (!ret)
65                  goto fail;
66
67 again:
68         preempt_disable();
69
70         ret = __get_user(uval, uaddr);
71         if (ret)
72                  goto fault;
73
74         if (uval != expected)
75                  goto out;
76
77         ret = __put_user(new, uaddr);
78         if (ret)
79                  goto fault;
80
81         regs->status32 |= STATUS_Z_MASK;
82
83 out:
84         preempt_enable();
85         return uval;
86
87 fault:
88         preempt_enable();
89
90         if (unlikely(ret != -EFAULT))
91                  goto fail;
92
93         mmap_read_lock(current->mm);
94         ret = fixup_user_fault(current->mm, (unsigned long) uaddr,
95                                FAULT_FLAG_WRITE, NULL);
96         mmap_read_unlock(current->mm);
97
98         if (likely(!ret))
99                  goto again;
100
101 fail:
102         force_sig(SIGSEGV);
103         return ret;
104 }
105
106 #ifdef CONFIG_ISA_ARCV2
107
108 void arch_cpu_idle(void)
109 {
110         /* Re-enable interrupts <= default irq priority before commiting SLEEP */
111         const unsigned int arg = 0x10 | ARCV2_IRQ_DEF_PRIO;
112
113         __asm__ __volatile__(
114                 "sleep %0       \n"
115                 :
116                 :"I"(arg)); /* can't be "r" has to be embedded const */
117 }
118
119 #elif defined(CONFIG_EZNPS_MTM_EXT)     /* ARC700 variant in NPS */
120
121 void arch_cpu_idle(void)
122 {
123         /* only the calling HW thread needs to sleep */
124         __asm__ __volatile__(
125                 ".word %0       \n"
126                 :
127                 :"i"(CTOP_INST_HWSCHD_WFT_IE12));
128 }
129
130 #else   /* ARC700 */
131
132 void arch_cpu_idle(void)
133 {
134         /* sleep, but enable both set E1/E2 (levels of interrutps) before committing */
135         __asm__ __volatile__("sleep 0x3 \n");
136 }
137
138 #endif
139
140 asmlinkage void ret_from_fork(void);
141
142 /*
143  * Copy architecture-specific thread state
144  *
145  * Layout of Child kernel mode stack as setup at the end of this function is
146  *
147  * |     ...        |
148  * |     ...        |
149  * |    unused      |
150  * |                |
151  * ------------------
152  * |     r25        |   <==== top of Stack (thread.ksp)
153  * ~                ~
154  * |    --to--      |   (CALLEE Regs of kernel mode)
155  * |     r13        |
156  * ------------------
157  * |     fp         |
158  * |    blink       |   @ret_from_fork
159  * ------------------
160  * |                |
161  * ~                ~
162  * ~                ~
163  * |                |
164  * ------------------
165  * |     r12        |
166  * ~                ~
167  * |    --to--      |   (scratch Regs of user mode)
168  * |     r0         |
169  * ------------------
170  * |      SP        |
171  * |    orig_r0     |
172  * |    event/ECR   |
173  * |    user_r25    |
174  * ------------------  <===== END of PAGE
175  */
176 int copy_thread(unsigned long clone_flags, unsigned long usp,
177                 unsigned long kthread_arg, struct task_struct *p,
178                 unsigned long tls)
179 {
180         struct pt_regs *c_regs;        /* child's pt_regs */
181         unsigned long *childksp;       /* to unwind out of __switch_to() */
182         struct callee_regs *c_callee;  /* child's callee regs */
183         struct callee_regs *parent_callee;  /* paren't callee */
184         struct pt_regs *regs = current_pt_regs();
185
186         /* Mark the specific anchors to begin with (see pic above) */
187         c_regs = task_pt_regs(p);
188         childksp = (unsigned long *)c_regs - 2;  /* 2 words for FP/BLINK */
189         c_callee = ((struct callee_regs *)childksp) - 1;
190
191         /*
192          * __switch_to() uses thread.ksp to start unwinding stack
193          * For kernel threads we don't need to create callee regs, the
194          * stack layout nevertheless needs to remain the same.
195          * Also, since __switch_to anyways unwinds callee regs, we use
196          * this to populate kernel thread entry-pt/args into callee regs,
197          * so that ret_from_kernel_thread() becomes simpler.
198          */
199         p->thread.ksp = (unsigned long)c_callee;        /* THREAD_KSP */
200
201         /* __switch_to expects FP(0), BLINK(return addr) at top */
202         childksp[0] = 0;                        /* fp */
203         childksp[1] = (unsigned long)ret_from_fork; /* blink */
204
205         if (unlikely(p->flags & PF_KTHREAD)) {
206                 memset(c_regs, 0, sizeof(struct pt_regs));
207
208                 c_callee->r13 = kthread_arg;
209                 c_callee->r14 = usp;  /* function */
210
211                 return 0;
212         }
213
214         /*--------- User Task Only --------------*/
215
216         /* __switch_to expects FP(0), BLINK(return addr) at top of stack */
217         childksp[0] = 0;                                /* for POP fp */
218         childksp[1] = (unsigned long)ret_from_fork;     /* for POP blink */
219
220         /* Copy parents pt regs on child's kernel mode stack */
221         *c_regs = *regs;
222
223         if (usp)
224                 c_regs->sp = usp;
225
226         c_regs->r0 = 0;         /* fork returns 0 in child */
227
228         parent_callee = ((struct callee_regs *)regs) - 1;
229         *c_callee = *parent_callee;
230
231         if (unlikely(clone_flags & CLONE_SETTLS)) {
232                 /*
233                  * set task's userland tls data ptr from 4th arg
234                  * clone C-lib call is difft from clone sys-call
235                  */
236                 task_thread_info(p)->thr_ptr = tls;
237         } else {
238                 /* Normal fork case: set parent's TLS ptr in child */
239                 task_thread_info(p)->thr_ptr =
240                 task_thread_info(current)->thr_ptr;
241         }
242
243
244         /*
245          * setup usermode thread pointer #1:
246          * when child is picked by scheduler, __switch_to() uses @c_callee to
247          * populate usermode callee regs: this works (despite being in a kernel
248          * function) since special return path for child @ret_from_fork()
249          * ensures those regs are not clobbered all the way to RTIE to usermode
250          */
251         c_callee->r25 = task_thread_info(p)->thr_ptr;
252
253 #ifdef CONFIG_ARC_CURR_IN_REG
254         /*
255          * setup usermode thread pointer #2:
256          * however for this special use of r25 in kernel, __switch_to() sets
257          * r25 for kernel needs and only in the final return path is usermode
258          * r25 setup, from pt_regs->user_r25. So set that up as well
259          */
260         c_regs->user_r25 = c_callee->r25;
261 #endif
262
263         return 0;
264 }
265
266 /*
267  * Do necessary setup to start up a new user task
268  */
269 void start_thread(struct pt_regs *regs, unsigned long pc, unsigned long usp)
270 {
271         regs->sp = usp;
272         regs->ret = pc;
273
274         /*
275          * [U]ser Mode bit set
276          * [L] ZOL loop inhibited to begin with - cleared by a LP insn
277          * Interrupts enabled
278          */
279         regs->status32 = STATUS_U_MASK | STATUS_L_MASK | ISA_INIT_STATUS_BITS;
280
281 #ifdef CONFIG_EZNPS_MTM_EXT
282         regs->eflags = 0;
283 #endif
284
285         fpu_init_task(regs);
286
287         /* bogus seed values for debugging */
288         regs->lp_start = 0x10;
289         regs->lp_end = 0x80;
290 }
291
292 /*
293  * Some archs flush debug and FPU info here
294  */
295 void flush_thread(void)
296 {
297 }
298
299 int elf_check_arch(const struct elf32_hdr *x)
300 {
301         unsigned int eflags;
302
303         if (x->e_machine != EM_ARC_INUSE) {
304                 pr_err("ELF not built for %s ISA\n",
305                         is_isa_arcompact() ? "ARCompact":"ARCv2");
306                 return 0;
307         }
308
309         eflags = x->e_flags;
310         if ((eflags & EF_ARC_OSABI_MSK) != EF_ARC_OSABI_CURRENT) {
311                 pr_err("ABI mismatch - you need newer toolchain\n");
312                 force_sigsegv(SIGSEGV);
313                 return 0;
314         }
315
316         return 1;
317 }
318 EXPORT_SYMBOL(elf_check_arch);
This page took 0.04904 seconds and 4 git commands to generate.