drivers/staging/kpc2000/kpc2000_i2c.c

   1 // SPDX-License-Identifier: GPL-2.0+
   2 /*
   3  * KPC2000 i2c driver
   4  *
   5  * Adapted i2c-i801.c for use with Kadoka hardware.
   6  *
   7  * Copyright (C) 1998 - 2002
   8  *      Frodo Looijaard <[email protected]>,
   9  *      Philip Edelbrock <[email protected]>,
  10  *      Mark D. Studebaker <[email protected]>
  11  * Copyright (C) 2007 - 2012
  12  *      Jean Delvare <[email protected]>
  13  * Copyright (C) 2010 Intel Corporation
  14  *      David Woodhouse <[email protected]>
  15  * Copyright (C) 2014-2018 Daktronics
  16  *      Matt Sickler <[email protected]>,
  17  *      Jordon Hofer <[email protected]>
  18  */
  19 #include <linux/init.h>
  20 #include <linux/module.h>
  21 #include <linux/types.h>
  22 #include <linux/io.h>
  23 #include <linux/io-64-nonatomic-lo-hi.h>
  24 #include <linux/export.h>
  25 #include <linux/slab.h>
  26 #include <linux/platform_device.h>
  27 #include <linux/fs.h>
  28 #include <linux/delay.h>
  29 #include <linux/i2c.h>
  30 #include "kpc.h"
  31
  32 MODULE_LICENSE("GPL");
  33 MODULE_AUTHOR("[email protected]");
  34
  35 struct kpc_i2c {
  36         unsigned long           smba;
  37         struct i2c_adapter      adapter;
  38         unsigned int            features;
  39 };
  40
  41 /*****************************
  42  *** Part 1 - i2c Handlers ***
  43  *****************************/
  44
  45 #define REG_SIZE 8
  46
  47 /* I801 SMBus address offsets */
  48 #define SMBHSTSTS(p)    ((0  * REG_SIZE) + (p)->smba)
  49 #define SMBHSTCNT(p)    ((2  * REG_SIZE) + (p)->smba)
  50 #define SMBHSTCMD(p)    ((3  * REG_SIZE) + (p)->smba)
  51 #define SMBHSTADD(p)    ((4  * REG_SIZE) + (p)->smba)
  52 #define SMBHSTDAT0(p)   ((5  * REG_SIZE) + (p)->smba)
  53 #define SMBHSTDAT1(p)   ((6  * REG_SIZE) + (p)->smba)
  54 #define SMBBLKDAT(p)    ((7  * REG_SIZE) + (p)->smba)
  55 #define SMBPEC(p)       ((8  * REG_SIZE) + (p)->smba)   /* ICH3 and later */
  56 #define SMBAUXSTS(p)    ((12 * REG_SIZE) + (p)->smba)   /* ICH4 and later */
  57 #define SMBAUXCTL(p)    ((13 * REG_SIZE) + (p)->smba)   /* ICH4 and later */
  58
  59 /* PCI Address Constants */
  60 #define SMBBAR      4
  61 #define SMBHSTCFG   0x040
  62
  63 /* Host configuration bits for SMBHSTCFG */
  64 #define SMBHSTCFG_HST_EN        1
  65 #define SMBHSTCFG_SMB_SMI_EN    2
  66 #define SMBHSTCFG_I2C_EN        4
  67
  68 /* Auxiliary control register bits, ICH4+ only */
  69 #define SMBAUXCTL_CRC       1
  70 #define SMBAUXCTL_E32B      2
  71
  72 /* kill bit for SMBHSTCNT */
  73 #define SMBHSTCNT_KILL      2
  74
  75 /* Other settings */
  76 #define MAX_RETRIES         400
  77 #define ENABLE_INT9         0       /* set to 0x01 to enable - untested */
  78
  79 /* I801 command constants */
  80 #define I801_QUICK              0x00
  81 #define I801_BYTE               0x04
  82 #define I801_BYTE_DATA          0x08
  83 #define I801_WORD_DATA          0x0C
  84 #define I801_PROC_CALL          0x10    /* unimplemented */
  85 #define I801_BLOCK_DATA         0x14
  86 #define I801_I2C_BLOCK_DATA     0x18    /* ICH5 and later */
  87 #define I801_BLOCK_LAST         0x34
  88 #define I801_I2C_BLOCK_LAST     0x38    /* ICH5 and later */
  89 #define I801_START              0x40
  90 #define I801_PEC_EN             0x80    /* ICH3 and later */
  91
  92 /* I801 Hosts Status register bits */
  93 #define SMBHSTSTS_BYTE_DONE     0x80
  94 #define SMBHSTSTS_INUSE_STS     0x40
  95 #define SMBHSTSTS_SMBALERT_STS  0x20
  96 #define SMBHSTSTS_FAILED        0x10
  97 #define SMBHSTSTS_BUS_ERR       0x08
  98 #define SMBHSTSTS_DEV_ERR       0x04
  99 #define SMBHSTSTS_INTR          0x02
 100 #define SMBHSTSTS_HOST_BUSY     0x01
 101
 102 #define STATUS_FLAGS    (SMBHSTSTS_BYTE_DONE | SMBHSTSTS_FAILED | \
 103                          SMBHSTSTS_BUS_ERR | SMBHSTSTS_DEV_ERR | SMBHSTSTS_INTR)
 104
 105 /* Older devices have their ID defined in <linux/pci_ids.h> */
 106 #define PCI_DEVICE_ID_INTEL_COUGARPOINT_SMBUS       0x1c22
 107 #define PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS          0x1d22
 108 /* Patsburg also has three 'Integrated Device Function' SMBus controllers */
 109 #define PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS_IDF0     0x1d70
 110 #define PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS_IDF1     0x1d71
 111 #define PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS_IDF2     0x1d72
 112 #define PCI_DEVICE_ID_INTEL_PANTHERPOINT_SMBUS      0x1e22
 113 #define PCI_DEVICE_ID_INTEL_DH89XXCC_SMBUS          0x2330
 114 #define PCI_DEVICE_ID_INTEL_5_3400_SERIES_SMBUS     0x3b30
 115 #define PCI_DEVICE_ID_INTEL_LYNXPOINT_SMBUS         0x8c22
 116 #define PCI_DEVICE_ID_INTEL_LYNXPOINT_LP_SMBUS      0x9c22
 117
 118 #define FEATURE_SMBUS_PEC       BIT(0)
 119 #define FEATURE_BLOCK_BUFFER    BIT(1)
 120 #define FEATURE_BLOCK_PROC      BIT(2)
 121 #define FEATURE_I2C_BLOCK_READ  BIT(3)
 122 /* Not really a feature, but it's convenient to handle it as such */
 123 #define FEATURE_IDF             BIT(15)
 124
 125 // FIXME!
 126 #undef inb_p
 127 #define inb_p(a) readq((void __iomem *)a)
 128 #undef outb_p
 129 #define outb_p(d, a) writeq(d, (void __iomem *)a)
 130
 131 /* Make sure the SMBus host is ready to start transmitting.
 132  * Return 0 if it is, -EBUSY if it is not.
 133  */
 134 static int i801_check_pre(struct kpc_i2c *priv)
 135 {
 136         int status;
 137
 138         status = inb_p(SMBHSTSTS(priv));
 139         if (status & SMBHSTSTS_HOST_BUSY) {
 140                 dev_err(&priv->adapter.dev,
 141                         "SMBus is busy, can't use it! (status=%x)\n", status);
 142                 return -EBUSY;
 143         }
 144
 145         status &= STATUS_FLAGS;
 146         if (status) {
 147                 outb_p(status, SMBHSTSTS(priv));
 148                 status = inb_p(SMBHSTSTS(priv)) & STATUS_FLAGS;
 149                 if (status) {
 150                         dev_err(&priv->adapter.dev,
 151                                 "Failed clearing status flags (%02x)\n", status);
 152                         return -EBUSY;
 153                 }
 154         }
 155         return 0;
 156 }
 157
 158 /* Convert the status register to an error code, and clear it. */
 159 static int i801_check_post(struct kpc_i2c *priv, int status, int timeout)
 160 {
 161         int result = 0;
 162
 163         /* If the SMBus is still busy, we give up */
 164         if (timeout) {
 165                 dev_err(&priv->adapter.dev, "Transaction timeout\n");
 166                 /* try to stop the current command */
 167                 dev_dbg(&priv->adapter.dev,
 168                         "Terminating the current operation\n");
 169                 outb_p(inb_p(SMBHSTCNT(priv)) | SMBHSTCNT_KILL,
 170                        SMBHSTCNT(priv));
 171                 usleep_range(1000, 2000);
 172                 outb_p(inb_p(SMBHSTCNT(priv)) & (~SMBHSTCNT_KILL),
 173                        SMBHSTCNT(priv));
 174
 175                 /* Check if it worked */
 176                 status = inb_p(SMBHSTSTS(priv));
 177                 if ((status & SMBHSTSTS_HOST_BUSY) ||
 178                     !(status & SMBHSTSTS_FAILED))
 179                         dev_err(&priv->adapter.dev,
 180                                 "Failed terminating the transaction\n");
 181                 outb_p(STATUS_FLAGS, SMBHSTSTS(priv));
 182                 return -ETIMEDOUT;
 183         }
 184
 185         if (status & SMBHSTSTS_FAILED) {
 186                 result = -EIO;
 187                 dev_err(&priv->adapter.dev, "Transaction failed\n");
 188         }
 189         if (status & SMBHSTSTS_DEV_ERR) {
 190                 result = -ENXIO;
 191                 dev_dbg(&priv->adapter.dev, "No response\n");
 192         }
 193         if (status & SMBHSTSTS_BUS_ERR) {
 194                 result = -EAGAIN;
 195                 dev_dbg(&priv->adapter.dev, "Lost arbitration\n");
 196         }
 197
 198         if (result) {
 199                 /* Clear error flags */
 200                 outb_p(status & STATUS_FLAGS, SMBHSTSTS(priv));
 201                 status = inb_p(SMBHSTSTS(priv)) & STATUS_FLAGS;
 202                 if (status)
 203                         dev_warn(&priv->adapter.dev, "Failed clearing status flags at end of transaction (%02x)\n", status);
 204         }
 205
 206         return result;
 207 }
 208
 209 static int i801_transaction(struct kpc_i2c *priv, int xact)
 210 {
 211         int status;
 212         int result;
 213         int timeout = 0;
 214
 215         result = i801_check_pre(priv);
 216         if (result < 0)
 217                 return result;
 218         /* the current contents of SMBHSTCNT can be overwritten, since PEC,
 219          * INTREN, SMBSCMD are passed in xact
 220          */
 221         outb_p(xact | I801_START, SMBHSTCNT(priv));
 222
 223         /* We will always wait for a fraction of a second! */
 224         do {
 225                 usleep_range(250, 500);
 226                 status = inb_p(SMBHSTSTS(priv));
 227         } while ((status & SMBHSTSTS_HOST_BUSY) && (timeout++ < MAX_RETRIES));
 228
 229         result = i801_check_post(priv, status, timeout > MAX_RETRIES);
 230         if (result < 0)
 231                 return result;
 232
 233         outb_p(SMBHSTSTS_INTR, SMBHSTSTS(priv));
 234         return 0;
 235 }
 236
 237 /* wait for INTR bit as advised by Intel */
 238 static void i801_wait_hwpec(struct kpc_i2c *priv)
 239 {
 240         int timeout = 0;
 241         int status;
 242
 243         do {
 244                 usleep_range(250, 500);
 245                 status = inb_p(SMBHSTSTS(priv));
 246         } while ((!(status & SMBHSTSTS_INTR)) && (timeout++ < MAX_RETRIES));
 247
 248         if (timeout > MAX_RETRIES)
 249                 dev_dbg(&priv->adapter.dev, "PEC Timeout!\n");
 250
 251         outb_p(status, SMBHSTSTS(priv));
 252 }
 253
 254 static int i801_block_transaction_by_block(struct kpc_i2c *priv,
 255                                            union i2c_smbus_data *data,
 256                                            char read_write, int hwpec)
 257 {
 258         int i, len;
 259         int status;
 260
 261         inb_p(SMBHSTCNT(priv)); /* reset the data buffer index */
 262
 263         /* Use 32-byte buffer to process this transaction */
 264         if (read_write == I2C_SMBUS_WRITE) {
 265                 len = data->block[0];
 266                 outb_p(len, SMBHSTDAT0(priv));
 267                 for (i = 0; i < len; i++)
 268                         outb_p(data->block[i + 1], SMBBLKDAT(priv));
 269         }
 270
 271         status = i801_transaction(priv,
 272                         I801_BLOCK_DATA | ENABLE_INT9 | I801_PEC_EN * hwpec);
 273         if (status)
 274                 return status;
 275
 276         if (read_write == I2C_SMBUS_READ) {
 277                 len = inb_p(SMBHSTDAT0(priv));
 278                 if (len < 1 || len > I2C_SMBUS_BLOCK_MAX)
 279                         return -EPROTO;
 280
 281                 data->block[0] = len;
 282                 for (i = 0; i < len; i++)
 283                         data->block[i + 1] = inb_p(SMBBLKDAT(priv));
 284         }
 285         return 0;
 286 }
 287
 288 static int i801_block_transaction_byte_by_byte(struct kpc_i2c *priv,
 289                                                union i2c_smbus_data *data,
 290                                                char read_write, int command,
 291                                                int hwpec)
 292 {
 293         int i, len;
 294         int smbcmd;
 295         int status;
 296         int result;
 297         int timeout;
 298
 299         result = i801_check_pre(priv);
 300         if (result < 0)
 301                 return result;
 302
 303         len = data->block[0];
 304
 305         if (read_write == I2C_SMBUS_WRITE) {
 306                 outb_p(len, SMBHSTDAT0(priv));
 307                 outb_p(data->block[1], SMBBLKDAT(priv));
 308         }
 309
 310         for (i = 1; i <= len; i++) {
 311                 if (i == len && read_write == I2C_SMBUS_READ) {
 312                         if (command == I2C_SMBUS_I2C_BLOCK_DATA)
 313                                 smbcmd = I801_I2C_BLOCK_LAST;
 314                         else
 315                                 smbcmd = I801_BLOCK_LAST;
 316                 } else {
 317                         if (command == I2C_SMBUS_I2C_BLOCK_DATA &&
 318                             read_write == I2C_SMBUS_READ)
 319                                 smbcmd = I801_I2C_BLOCK_DATA;
 320                         else
 321                                 smbcmd = I801_BLOCK_DATA;
 322                 }
 323                 outb_p(smbcmd | ENABLE_INT9, SMBHSTCNT(priv));
 324
 325                 if (i == 1)
 326                         outb_p(inb(SMBHSTCNT(priv)) | I801_START,
 327                                SMBHSTCNT(priv));
 328                 /* We will always wait for a fraction of a second! */
 329                 timeout = 0;
 330                 do {
 331                         usleep_range(250, 500);
 332                         status = inb_p(SMBHSTSTS(priv));
 333                 } while (!(status & SMBHSTSTS_BYTE_DONE) &&
 334                          (timeout++ < MAX_RETRIES));
 335
 336                 result = i801_check_post(priv, status, timeout > MAX_RETRIES);
 337                 if (result < 0)
 338                         return result;
 339                 if (i == 1 && read_write == I2C_SMBUS_READ &&
 340                     command != I2C_SMBUS_I2C_BLOCK_DATA) {
 341                         len = inb_p(SMBHSTDAT0(priv));
 342                         if (len < 1 || len > I2C_SMBUS_BLOCK_MAX) {
 343                                 dev_err(&priv->adapter.dev,
 344                                         "Illegal SMBus block read size %d\n",
 345                                         len);
 346                                 /* Recover */
 347                                 while (inb_p(SMBHSTSTS(priv)) &
 348                                                 SMBHSTSTS_HOST_BUSY)
 349                                         outb_p(SMBHSTSTS_BYTE_DONE,
 350                                                SMBHSTSTS(priv));
 351                                 outb_p(SMBHSTSTS_INTR,
 352                                        SMBHSTSTS(priv));
 353                                 return -EPROTO;
 354                         }
 355                         data->block[0] = len;
 356                 }
 357
 358                 /* Retrieve/store value in SMBBLKDAT */
 359                 if (read_write == I2C_SMBUS_READ)
 360                         data->block[i] = inb_p(SMBBLKDAT(priv));
 361                 if (read_write == I2C_SMBUS_WRITE && i + 1 <= len)
 362                         outb_p(data->block[i + 1], SMBBLKDAT(priv));
 363                 /* signals SMBBLKDAT ready */
 364                 outb_p(SMBHSTSTS_BYTE_DONE | SMBHSTSTS_INTR, SMBHSTSTS(priv));
 365         }
 366
 367         return 0;
 368 }
 369
 370 static int i801_set_block_buffer_mode(struct kpc_i2c *priv)
 371 {
 372         outb_p(inb_p(SMBAUXCTL(priv)) | SMBAUXCTL_E32B, SMBAUXCTL(priv));
 373         if ((inb_p(SMBAUXCTL(priv)) & SMBAUXCTL_E32B) == 0)
 374                 return -EIO;
 375         return 0;
 376 }
 377
 378 /* Block transaction function */
 379 static int i801_block_transaction(struct kpc_i2c *priv,
 380                                   union i2c_smbus_data *data, char read_write,
 381                                   int command, int hwpec)
 382 {
 383         int result = 0;
 384         //unsigned char hostc;
 385
 386         if (command == I2C_SMBUS_I2C_BLOCK_DATA) {
 387                 if (read_write == I2C_SMBUS_WRITE) {
 388                         /* set I2C_EN bit in configuration register */
 389                         //TODO: Figure out the right thing to do here...
 390                         //pci_read_config_byte(priv->pci_dev, SMBHSTCFG, &hostc);
 391                         //pci_write_config_byte(priv->pci_dev, SMBHSTCFG, hostc | SMBHSTCFG_I2C_EN);
 392                 } else if (!(priv->features & FEATURE_I2C_BLOCK_READ)) {
 393                         dev_err(&priv->adapter.dev,
 394                                 "I2C block read is unsupported!\n");
 395                         return -EOPNOTSUPP;
 396                 }
 397         }
 398
 399         if (read_write == I2C_SMBUS_WRITE ||
 400             command == I2C_SMBUS_I2C_BLOCK_DATA) {
 401                 if (data->block[0] < 1)
 402                         data->block[0] = 1;
 403                 if (data->block[0] > I2C_SMBUS_BLOCK_MAX)
 404                         data->block[0] = I2C_SMBUS_BLOCK_MAX;
 405         } else {
 406                 data->block[0] = 32;    /* max for SMBus block reads */
 407         }
 408
 409         /* Experience has shown that the block buffer can only be used for
 410          * SMBus (not I2C) block transactions, even though the datasheet
 411          * doesn't mention this limitation.
 412          */
 413         if ((priv->features & FEATURE_BLOCK_BUFFER) &&
 414             command != I2C_SMBUS_I2C_BLOCK_DATA &&
 415             i801_set_block_buffer_mode(priv) == 0) {
 416                 result = i801_block_transaction_by_block(priv, data,
 417                                                          read_write, hwpec);
 418         } else {
 419                 result = i801_block_transaction_byte_by_byte(priv, data,
 420                                                              read_write,
 421                                                              command, hwpec);
 422         }
 423
 424         if (result == 0 && hwpec)
 425                 i801_wait_hwpec(priv);
 426         if (command == I2C_SMBUS_I2C_BLOCK_DATA &&
 427             read_write == I2C_SMBUS_WRITE) {
 428                 /* restore saved configuration register value */
 429                 //TODO: Figure out the right thing to do here...
 430                 //pci_write_config_byte(priv->pci_dev, SMBHSTCFG, hostc);
 431         }
 432         return result;
 433 }
 434
 435 /* Return negative errno on error. */
 436 static s32 i801_access(struct i2c_adapter *adap, u16 addr,
 437                        unsigned short flags, char read_write, u8 command,
 438                        int size, union i2c_smbus_data *data)
 439 {
 440         int hwpec;
 441         int block = 0;
 442         int ret, xact = 0;
 443         struct kpc_i2c *priv = i2c_get_adapdata(adap);
 444
 445         hwpec = (priv->features & FEATURE_SMBUS_PEC) &&
 446                 (flags & I2C_CLIENT_PEC) &&
 447                 size != I2C_SMBUS_QUICK && size != I2C_SMBUS_I2C_BLOCK_DATA;
 448
 449         switch (size) {
 450         case I2C_SMBUS_QUICK:
 451                 dev_dbg(&priv->adapter.dev, "  [acc] SMBUS_QUICK\n");
 452                 outb_p(((addr & 0x7f) << 1) | (read_write & 0x01),
 453                        SMBHSTADD(priv));
 454
 455                 xact = I801_QUICK;
 456                 break;
 457         case I2C_SMBUS_BYTE:
 458                 dev_dbg(&priv->adapter.dev, "  [acc] SMBUS_BYTE\n");
 459
 460                 outb_p(((addr & 0x7f) << 1) | (read_write & 0x01),
 461                        SMBHSTADD(priv));
 462                 if (read_write == I2C_SMBUS_WRITE)
 463                         outb_p(command, SMBHSTCMD(priv));
 464                 xact = I801_BYTE;
 465                 break;
 466         case I2C_SMBUS_BYTE_DATA:
 467                 dev_dbg(&priv->adapter.dev, "  [acc] SMBUS_BYTE_DATA\n");
 468                 outb_p(((addr & 0x7f) << 1) | (read_write & 0x01),
 469                        SMBHSTADD(priv));
 470
 471                 outb_p(command, SMBHSTCMD(priv));
 472                 if (read_write == I2C_SMBUS_WRITE)
 473                         outb_p(data->byte, SMBHSTDAT0(priv));
 474                 xact = I801_BYTE_DATA;
 475                 break;
 476         case I2C_SMBUS_WORD_DATA:
 477                 dev_dbg(&priv->adapter.dev, "  [acc] SMBUS_WORD_DATA\n");
 478                 outb_p(((addr & 0x7f) << 1) | (read_write & 0x01),
 479                        SMBHSTADD(priv));
 480
 481                 outb_p(command, SMBHSTCMD(priv));
 482                 if (read_write == I2C_SMBUS_WRITE) {
 483                         outb_p(data->word & 0xff, SMBHSTDAT0(priv));
 484                         outb_p((data->word & 0xff00) >> 8, SMBHSTDAT1(priv));
 485                 }
 486                 xact = I801_WORD_DATA;
 487                 break;
 488         case I2C_SMBUS_BLOCK_DATA:
 489                 dev_dbg(&priv->adapter.dev, "  [acc] SMBUS_BLOCK_DATA\n");
 490                 outb_p(((addr & 0x7f) << 1) | (read_write & 0x01),
 491                        SMBHSTADD(priv));
 492
 493                 outb_p(command, SMBHSTCMD(priv));
 494                 block = 1;
 495                 break;
 496         case I2C_SMBUS_I2C_BLOCK_DATA:
 497                 dev_dbg(&priv->adapter.dev, "  [acc] SMBUS_I2C_BLOCK_DATA\n");
 498                 /* NB: page 240 of ICH5 datasheet shows that the R/#W
 499                  * bit should be cleared here, even when reading
 500                  */
 501                 outb_p((addr & 0x7f) << 1, SMBHSTADD(priv));
 502                 if (read_write == I2C_SMBUS_READ) {
 503                         /* NB: page 240 of ICH5 datasheet also shows
 504                          * that DATA1 is the cmd field when reading
 505                          */
 506                         outb_p(command, SMBHSTDAT1(priv));
 507                 } else {
 508                         outb_p(command, SMBHSTCMD(priv));
 509                 }
 510                 block = 1;
 511                 break;
 512         default:
 513                 dev_dbg(&priv->adapter.dev,
 514                         "  [acc] Unsupported transaction %d\n", size);
 515                 return -EOPNOTSUPP;
 516         }
 517
 518         if (hwpec) { /* enable/disable hardware PEC */
 519                 dev_dbg(&priv->adapter.dev, "  [acc] hwpec: yes\n");
 520                 outb_p(inb_p(SMBAUXCTL(priv)) | SMBAUXCTL_CRC, SMBAUXCTL(priv));
 521         } else {
 522                 dev_dbg(&priv->adapter.dev, "  [acc] hwpec: no\n");
 523                 outb_p(inb_p(SMBAUXCTL(priv)) &
 524                                 (~SMBAUXCTL_CRC), SMBAUXCTL(priv));
 525         }
 526
 527         if (block) {
 528                 dev_dbg(&priv->adapter.dev, "  [acc] block: yes\n");
 529                 ret = i801_block_transaction(priv, data, read_write, size,
 530                                              hwpec);
 531         } else {
 532                 dev_dbg(&priv->adapter.dev, "  [acc] block: no\n");
 533                 ret = i801_transaction(priv, xact | ENABLE_INT9);
 534         }
 535
 536         /* Some BIOSes don't like it when PEC is enabled at reboot or resume
 537          * time, so we forcibly disable it after every transaction. Turn off
 538          * E32B for the same reason.
 539          */
 540         if (hwpec || block) {
 541                 dev_dbg(&priv->adapter.dev, "  [acc] hwpec || block\n");
 542                 outb_p(inb_p(SMBAUXCTL(priv)) & ~(SMBAUXCTL_CRC |
 543                                         SMBAUXCTL_E32B), SMBAUXCTL(priv));
 544         }
 545         if (block) {
 546                 dev_dbg(&priv->adapter.dev, "  [acc] block\n");
 547                 return ret;
 548         }
 549         if (ret) {
 550                 dev_dbg(&priv->adapter.dev, "  [acc] ret %d\n", ret);
 551                 return ret;
 552         }
 553         if ((read_write == I2C_SMBUS_WRITE) || (xact == I801_QUICK)) {
 554                 dev_dbg(&priv->adapter.dev,
 555                         "  [acc] I2C_SMBUS_WRITE || I801_QUICK  -> ret 0\n");
 556                 return 0;
 557         }
 558
 559         switch (xact & 0x7f) {
 560         case I801_BYTE:  /* Result put in SMBHSTDAT0 */
 561         case I801_BYTE_DATA:
 562                 dev_dbg(&priv->adapter.dev,
 563                         "  [acc] I801_BYTE or I801_BYTE_DATA\n");
 564                 data->byte = inb_p(SMBHSTDAT0(priv));
 565                 break;
 566         case I801_WORD_DATA:
 567                 dev_dbg(&priv->adapter.dev, "  [acc] I801_WORD_DATA\n");
 568                 data->word = inb_p(SMBHSTDAT0(priv)) +
 569                              (inb_p(SMBHSTDAT1(priv)) << 8);
 570                 break;
 571         }
 572         return 0;
 573 }
 574
 575 #define enable_flag(x) (x)
 576 #define disable_flag(x) 0
 577 #define enable_flag_if(x, cond) ((cond) ? (x) : 0)
 578
 579 static u32 i801_func(struct i2c_adapter *adapter)
 580 {
 581         struct kpc_i2c *priv = i2c_get_adapdata(adapter);
 582
 583         /* original settings
 584          * u32 f = I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE |
 585          * I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA |
 586          * I2C_FUNC_SMBUS_BLOCK_DATA | I2C_FUNC_SMBUS_WRITE_I2C_BLOCK |
 587          * ((priv->features & FEATURE_SMBUS_PEC) ? I2C_FUNC_SMBUS_PEC : 0) |
 588          * ((priv->features & FEATURE_I2C_BLOCK_READ) ?
 589          * I2C_FUNC_SMBUS_READ_I2C_BLOCK : 0);
 590          */
 591
 592         // http://lxr.free-electrons.com/source/include/uapi/linux/i2c.h#L85
 593
 594         u32 f =
 595                 enable_flag(I2C_FUNC_I2C) | /* 0x00000001(I enabled this one) */
 596                 disable_flag(I2C_FUNC_10BIT_ADDR)             | /* 0x00000002 */
 597                 disable_flag(I2C_FUNC_PROTOCOL_MANGLING)      | /* 0x00000004 */
 598                 enable_flag_if(I2C_FUNC_SMBUS_PEC,
 599                                priv->features & FEATURE_SMBUS_PEC) |
 600                                                                 /* 0x00000008 */
 601                 disable_flag(I2C_FUNC_SMBUS_BLOCK_PROC_CALL)  | /* 0x00008000 */
 602                 enable_flag(I2C_FUNC_SMBUS_QUICK)             | /* 0x00010000 */
 603                 disable_flag(I2C_FUNC_SMBUS_READ_BYTE)        | /* 0x00020000 */
 604                 disable_flag(I2C_FUNC_SMBUS_WRITE_BYTE)       | /* 0x00040000 */
 605                 disable_flag(I2C_FUNC_SMBUS_READ_BYTE_DATA)   | /* 0x00080000 */
 606                 disable_flag(I2C_FUNC_SMBUS_WRITE_BYTE_DATA)  | /* 0x00100000 */
 607                 disable_flag(I2C_FUNC_SMBUS_READ_WORD_DATA)   | /* 0x00200000 */
 608                 disable_flag(I2C_FUNC_SMBUS_WRITE_WORD_DATA)  | /* 0x00400000 */
 609                 disable_flag(I2C_FUNC_SMBUS_PROC_CALL)        | /* 0x00800000 */
 610                 disable_flag(I2C_FUNC_SMBUS_READ_BLOCK_DATA)  | /* 0x01000000 */
 611                 disable_flag(I2C_FUNC_SMBUS_WRITE_BLOCK_DATA) | /* 0x02000000 */
 612                 enable_flag_if(I2C_FUNC_SMBUS_READ_I2C_BLOCK,
 613                                priv->features & FEATURE_I2C_BLOCK_READ) |
 614                                                                 /* 0x04000000 */
 615                 enable_flag(I2C_FUNC_SMBUS_WRITE_I2C_BLOCK)   | /* 0x08000000 */
 616
 617                 enable_flag(I2C_FUNC_SMBUS_BYTE) | /* _READ_BYTE  _WRITE_BYTE */
 618                 enable_flag(I2C_FUNC_SMBUS_BYTE_DATA)  | /* _READ_BYTE_DATA
 619                                                           * _WRITE_BYTE_DATA
 620                                                           */
 621                 enable_flag(I2C_FUNC_SMBUS_WORD_DATA)  | /* _READ_WORD_DATA
 622                                                           * _WRITE_WORD_DATA
 623                                                           */
 624                 enable_flag(I2C_FUNC_SMBUS_BLOCK_DATA) | /* _READ_BLOCK_DATA
 625                                                           * _WRITE_BLOCK_DATA
 626                                                           */
 627                 disable_flag(I2C_FUNC_SMBUS_I2C_BLOCK) | /* _READ_I2C_BLOCK
 628                                                           * _WRITE_I2C_BLOCK
 629                                                           */
 630                 disable_flag(I2C_FUNC_SMBUS_EMUL); /* _QUICK  _BYTE
 631                                                     * _BYTE_DATA  _WORD_DATA
 632                                                     * _PROC_CALL
 633                                                     * _WRITE_BLOCK_DATA
 634                                                     * _I2C_BLOCK _PEC
 635                                                     */
 636         return f;
 637 }
 638
 639 #undef enable_flag
 640 #undef disable_flag
 641 #undef enable_flag_if
 642
 643 static const struct i2c_algorithm smbus_algorithm = {
 644         .smbus_xfer     = i801_access,
 645         .functionality  = i801_func,
 646 };
 647
 648 /********************************
 649  *** Part 2 - Driver Handlers ***
 650  ********************************/
 651 static int kpc_i2c_probe(struct platform_device *pldev)
 652 {
 653         int err;
 654         struct kpc_i2c *priv;
 655         struct resource *res;
 656
 657         priv = devm_kzalloc(&pldev->dev, sizeof(*priv), GFP_KERNEL);
 658         if (!priv)
 659                 return -ENOMEM;
 660
 661         i2c_set_adapdata(&priv->adapter, priv);
 662         priv->adapter.owner = THIS_MODULE;
 663         priv->adapter.class = I2C_CLASS_HWMON | I2C_CLASS_SPD;
 664         priv->adapter.algo = &smbus_algorithm;
 665
 666         res = platform_get_resource(pldev, IORESOURCE_MEM, 0);
 667         if (!res)
 668                 return -ENXIO;
 669
 670         priv->smba = (unsigned long)devm_ioremap(&pldev->dev,
 671                                                          res->start,
 672                                                          resource_size(res));
 673         if (!priv->smba)
 674                 return -ENOMEM;
 675
 676         platform_set_drvdata(pldev, priv);
 677
 678         priv->features |= FEATURE_IDF;
 679         priv->features |= FEATURE_I2C_BLOCK_READ;
 680         priv->features |= FEATURE_SMBUS_PEC;
 681         priv->features |= FEATURE_BLOCK_BUFFER;
 682
 683         //init_MUTEX(&lddata->sem);
 684
 685         /* set up the sysfs linkage to our parent device */
 686         priv->adapter.dev.parent = &pldev->dev;
 687
 688         /* Retry up to 3 times on lost arbitration */
 689         priv->adapter.retries = 3;
 690
 691         snprintf(priv->adapter.name, sizeof(priv->adapter.name),
 692                  "Fake SMBus I801 adapter");
 693
 694         err = i2c_add_adapter(&priv->adapter);
 695         if (err) {
 696                 dev_err(&priv->adapter.dev, "Failed to add SMBus adapter\n");
 697                 return err;
 698         }
 699
 700         return 0;
 701 }
 702
 703 static int kpc_i2c_remove(struct platform_device *pldev)
 704 {
 705         struct kpc_i2c *lddev;
 706
 707         lddev = (struct kpc_i2c *)platform_get_drvdata(pldev);
 708
 709         i2c_del_adapter(&lddev->adapter);
 710
 711         //TODO: Figure out the right thing to do here...
 712         //pci_write_config_byte(dev, SMBHSTCFG, priv->original_hstcfg);
 713         //pci_release_region(dev, SMBBAR);
 714         //pci_set_drvdata(dev, NULL);
 715
 716         //cdev_del(&lddev->cdev);
 717
 718         return 0;
 719 }
 720
 721 static struct platform_driver kpc_i2c_driver = {
 722         .probe      = kpc_i2c_probe,
 723         .remove     = kpc_i2c_remove,
 724         .driver     = {
 725                 .name   = KP_DRIVER_NAME_I2C,
 726         },
 727 };
 728
 729 module_platform_driver(kpc_i2c_driver);