drivers/dma/xilinx/xilinx_dma.c

   1 // SPDX-License-Identifier: GPL-2.0-or-later
   2 /*
   3  * DMA driver for Xilinx Video DMA Engine
   4  *
   5  * Copyright (C) 2010-2014 Xilinx, Inc. All rights reserved.
   6  *
   7  * Based on the Freescale DMA driver.
   8  *
   9  * Description:
  10  * The AXI Video Direct Memory Access (AXI VDMA) core is a soft Xilinx IP
  11  * core that provides high-bandwidth direct memory access between memory
  12  * and AXI4-Stream type video target peripherals. The core provides efficient
  13  * two dimensional DMA operations with independent asynchronous read (S2MM)
  14  * and write (MM2S) channel operation. It can be configured to have either
  15  * one channel or two channels. If configured as two channels, one is to
  16  * transmit to the video device (MM2S) and another is to receive from the
  17  * video device (S2MM). Initialization, status, interrupt and management
  18  * registers are accessed through an AXI4-Lite slave interface.
  19  *
  20  * The AXI Direct Memory Access (AXI DMA) core is a soft Xilinx IP core that
  21  * provides high-bandwidth one dimensional direct memory access between memory
  22  * and AXI4-Stream target peripherals. It supports one receive and one
  23  * transmit channel, both of them optional at synthesis time.
  24  *
  25  * The AXI CDMA, is a soft IP, which provides high-bandwidth Direct Memory
  26  * Access (DMA) between a memory-mapped source address and a memory-mapped
  27  * destination address.
  28  *
  29  * The AXI Multichannel Direct Memory Access (AXI MCDMA) core is a soft
  30  * Xilinx IP that provides high-bandwidth direct memory access between
  31  * memory and AXI4-Stream target peripherals. It provides scatter gather
  32  * (SG) interface with multiple channels independent configuration support.
  33  *
  34  */
  35
  36 #include <linux/bitops.h>
  37 #include <linux/dmapool.h>
  38 #include <linux/dma/xilinx_dma.h>
  39 #include <linux/init.h>
  40 #include <linux/interrupt.h>
  41 #include <linux/io.h>
  42 #include <linux/iopoll.h>
  43 #include <linux/module.h>
  44 #include <linux/of_address.h>
  45 #include <linux/of_dma.h>
  46 #include <linux/of_platform.h>
  47 #include <linux/of_irq.h>
  48 #include <linux/slab.h>
  49 #include <linux/clk.h>
  50 #include <linux/io-64-nonatomic-lo-hi.h>
  51
  52 #include "../dmaengine.h"
  53
  54 /* Register/Descriptor Offsets */
  55 #define XILINX_DMA_MM2S_CTRL_OFFSET             0x0000
  56 #define XILINX_DMA_S2MM_CTRL_OFFSET             0x0030
  57 #define XILINX_VDMA_MM2S_DESC_OFFSET            0x0050
  58 #define XILINX_VDMA_S2MM_DESC_OFFSET            0x00a0
  59
  60 /* Control Registers */
  61 #define XILINX_DMA_REG_DMACR                    0x0000
  62 #define XILINX_DMA_DMACR_DELAY_MAX              0xff
  63 #define XILINX_DMA_DMACR_DELAY_SHIFT            24
  64 #define XILINX_DMA_DMACR_FRAME_COUNT_MAX        0xff
  65 #define XILINX_DMA_DMACR_FRAME_COUNT_SHIFT      16
  66 #define XILINX_DMA_DMACR_ERR_IRQ                BIT(14)
  67 #define XILINX_DMA_DMACR_DLY_CNT_IRQ            BIT(13)
  68 #define XILINX_DMA_DMACR_FRM_CNT_IRQ            BIT(12)
  69 #define XILINX_DMA_DMACR_MASTER_SHIFT           8
  70 #define XILINX_DMA_DMACR_FSYNCSRC_SHIFT 5
  71 #define XILINX_DMA_DMACR_FRAMECNT_EN            BIT(4)
  72 #define XILINX_DMA_DMACR_GENLOCK_EN             BIT(3)
  73 #define XILINX_DMA_DMACR_RESET                  BIT(2)
  74 #define XILINX_DMA_DMACR_CIRC_EN                BIT(1)
  75 #define XILINX_DMA_DMACR_RUNSTOP                BIT(0)
  76 #define XILINX_DMA_DMACR_FSYNCSRC_MASK          GENMASK(6, 5)
  77 #define XILINX_DMA_DMACR_DELAY_MASK             GENMASK(31, 24)
  78 #define XILINX_DMA_DMACR_FRAME_COUNT_MASK       GENMASK(23, 16)
  79 #define XILINX_DMA_DMACR_MASTER_MASK            GENMASK(11, 8)
  80
  81 #define XILINX_DMA_REG_DMASR                    0x0004
  82 #define XILINX_DMA_DMASR_EOL_LATE_ERR           BIT(15)
  83 #define XILINX_DMA_DMASR_ERR_IRQ                BIT(14)
  84 #define XILINX_DMA_DMASR_DLY_CNT_IRQ            BIT(13)
  85 #define XILINX_DMA_DMASR_FRM_CNT_IRQ            BIT(12)
  86 #define XILINX_DMA_DMASR_SOF_LATE_ERR           BIT(11)
  87 #define XILINX_DMA_DMASR_SG_DEC_ERR             BIT(10)
  88 #define XILINX_DMA_DMASR_SG_SLV_ERR             BIT(9)
  89 #define XILINX_DMA_DMASR_EOF_EARLY_ERR          BIT(8)
  90 #define XILINX_DMA_DMASR_SOF_EARLY_ERR          BIT(7)
  91 #define XILINX_DMA_DMASR_DMA_DEC_ERR            BIT(6)
  92 #define XILINX_DMA_DMASR_DMA_SLAVE_ERR          BIT(5)
  93 #define XILINX_DMA_DMASR_DMA_INT_ERR            BIT(4)
  94 #define XILINX_DMA_DMASR_SG_MASK                BIT(3)
  95 #define XILINX_DMA_DMASR_IDLE                   BIT(1)
  96 #define XILINX_DMA_DMASR_HALTED         BIT(0)
  97 #define XILINX_DMA_DMASR_DELAY_MASK             GENMASK(31, 24)
  98 #define XILINX_DMA_DMASR_FRAME_COUNT_MASK       GENMASK(23, 16)
  99
 100 #define XILINX_DMA_REG_CURDESC                  0x0008
 101 #define XILINX_DMA_REG_TAILDESC         0x0010
 102 #define XILINX_DMA_REG_REG_INDEX                0x0014
 103 #define XILINX_DMA_REG_FRMSTORE         0x0018
 104 #define XILINX_DMA_REG_THRESHOLD                0x001c
 105 #define XILINX_DMA_REG_FRMPTR_STS               0x0024
 106 #define XILINX_DMA_REG_PARK_PTR         0x0028
 107 #define XILINX_DMA_PARK_PTR_WR_REF_SHIFT        8
 108 #define XILINX_DMA_PARK_PTR_WR_REF_MASK         GENMASK(12, 8)
 109 #define XILINX_DMA_PARK_PTR_RD_REF_SHIFT        0
 110 #define XILINX_DMA_PARK_PTR_RD_REF_MASK         GENMASK(4, 0)
 111 #define XILINX_DMA_REG_VDMA_VERSION             0x002c
 112
 113 /* Register Direct Mode Registers */
 114 #define XILINX_DMA_REG_VSIZE                    0x0000
 115 #define XILINX_DMA_REG_HSIZE                    0x0004
 116
 117 #define XILINX_DMA_REG_FRMDLY_STRIDE            0x0008
 118 #define XILINX_DMA_FRMDLY_STRIDE_FRMDLY_SHIFT   24
 119 #define XILINX_DMA_FRMDLY_STRIDE_STRIDE_SHIFT   0
 120
 121 #define XILINX_VDMA_REG_START_ADDRESS(n)        (0x000c + 4 * (n))
 122 #define XILINX_VDMA_REG_START_ADDRESS_64(n)     (0x000c + 8 * (n))
 123
 124 #define XILINX_VDMA_REG_ENABLE_VERTICAL_FLIP    0x00ec
 125 #define XILINX_VDMA_ENABLE_VERTICAL_FLIP        BIT(0)
 126
 127 /* HW specific definitions */
 128 #define XILINX_MCDMA_MAX_CHANS_PER_DEVICE       0x20
 129 #define XILINX_DMA_MAX_CHANS_PER_DEVICE         0x2
 130 #define XILINX_CDMA_MAX_CHANS_PER_DEVICE        0x1
 131
 132 #define XILINX_DMA_DMAXR_ALL_IRQ_MASK   \
 133                 (XILINX_DMA_DMASR_FRM_CNT_IRQ | \
 134                  XILINX_DMA_DMASR_DLY_CNT_IRQ | \
 135                  XILINX_DMA_DMASR_ERR_IRQ)
 136
 137 #define XILINX_DMA_DMASR_ALL_ERR_MASK   \
 138                 (XILINX_DMA_DMASR_EOL_LATE_ERR | \
 139                  XILINX_DMA_DMASR_SOF_LATE_ERR | \
 140                  XILINX_DMA_DMASR_SG_DEC_ERR | \
 141                  XILINX_DMA_DMASR_SG_SLV_ERR | \
 142                  XILINX_DMA_DMASR_EOF_EARLY_ERR | \
 143                  XILINX_DMA_DMASR_SOF_EARLY_ERR | \
 144                  XILINX_DMA_DMASR_DMA_DEC_ERR | \
 145                  XILINX_DMA_DMASR_DMA_SLAVE_ERR | \
 146                  XILINX_DMA_DMASR_DMA_INT_ERR)
 147
 148 /*
 149  * Recoverable errors are DMA Internal error, SOF Early, EOF Early
 150  * and SOF Late. They are only recoverable when C_FLUSH_ON_FSYNC
 151  * is enabled in the h/w system.
 152  */
 153 #define XILINX_DMA_DMASR_ERR_RECOVER_MASK       \
 154                 (XILINX_DMA_DMASR_SOF_LATE_ERR | \
 155                  XILINX_DMA_DMASR_EOF_EARLY_ERR | \
 156                  XILINX_DMA_DMASR_SOF_EARLY_ERR | \
 157                  XILINX_DMA_DMASR_DMA_INT_ERR)
 158
 159 /* Axi VDMA Flush on Fsync bits */
 160 #define XILINX_DMA_FLUSH_S2MM           3
 161 #define XILINX_DMA_FLUSH_MM2S           2
 162 #define XILINX_DMA_FLUSH_BOTH           1
 163
 164 /* Delay loop counter to prevent hardware failure */
 165 #define XILINX_DMA_LOOP_COUNT           1000000
 166
 167 /* AXI DMA Specific Registers/Offsets */
 168 #define XILINX_DMA_REG_SRCDSTADDR       0x18
 169 #define XILINX_DMA_REG_BTT              0x28
 170
 171 /* AXI DMA Specific Masks/Bit fields */
 172 #define XILINX_DMA_MAX_TRANS_LEN_MIN    8
 173 #define XILINX_DMA_MAX_TRANS_LEN_MAX    23
 174 #define XILINX_DMA_V2_MAX_TRANS_LEN_MAX 26
 175 #define XILINX_DMA_CR_COALESCE_MAX      GENMASK(23, 16)
 176 #define XILINX_DMA_CR_CYCLIC_BD_EN_MASK BIT(4)
 177 #define XILINX_DMA_CR_COALESCE_SHIFT    16
 178 #define XILINX_DMA_BD_SOP               BIT(27)
 179 #define XILINX_DMA_BD_EOP               BIT(26)
 180 #define XILINX_DMA_COALESCE_MAX         255
 181 #define XILINX_DMA_NUM_DESCS            255
 182 #define XILINX_DMA_NUM_APP_WORDS        5
 183
 184 /* AXI CDMA Specific Registers/Offsets */
 185 #define XILINX_CDMA_REG_SRCADDR         0x18
 186 #define XILINX_CDMA_REG_DSTADDR         0x20
 187
 188 /* AXI CDMA Specific Masks */
 189 #define XILINX_CDMA_CR_SGMODE          BIT(3)
 190
 191 #define xilinx_prep_dma_addr_t(addr)    \
 192         ((dma_addr_t)((u64)addr##_##msb << 32 | (addr)))
 193
 194 /* AXI MCDMA Specific Registers/Offsets */
 195 #define XILINX_MCDMA_MM2S_CTRL_OFFSET           0x0000
 196 #define XILINX_MCDMA_S2MM_CTRL_OFFSET           0x0500
 197 #define XILINX_MCDMA_CHEN_OFFSET                0x0008
 198 #define XILINX_MCDMA_CH_ERR_OFFSET              0x0010
 199 #define XILINX_MCDMA_RXINT_SER_OFFSET           0x0020
 200 #define XILINX_MCDMA_TXINT_SER_OFFSET           0x0028
 201 #define XILINX_MCDMA_CHAN_CR_OFFSET(x)          (0x40 + (x) * 0x40)
 202 #define XILINX_MCDMA_CHAN_SR_OFFSET(x)          (0x44 + (x) * 0x40)
 203 #define XILINX_MCDMA_CHAN_CDESC_OFFSET(x)       (0x48 + (x) * 0x40)
 204 #define XILINX_MCDMA_CHAN_TDESC_OFFSET(x)       (0x50 + (x) * 0x40)
 205
 206 /* AXI MCDMA Specific Masks/Shifts */
 207 #define XILINX_MCDMA_COALESCE_SHIFT             16
 208 #define XILINX_MCDMA_COALESCE_MAX               24
 209 #define XILINX_MCDMA_IRQ_ALL_MASK               GENMASK(7, 5)
 210 #define XILINX_MCDMA_COALESCE_MASK              GENMASK(23, 16)
 211 #define XILINX_MCDMA_CR_RUNSTOP_MASK            BIT(0)
 212 #define XILINX_MCDMA_IRQ_IOC_MASK               BIT(5)
 213 #define XILINX_MCDMA_IRQ_DELAY_MASK             BIT(6)
 214 #define XILINX_MCDMA_IRQ_ERR_MASK               BIT(7)
 215 #define XILINX_MCDMA_BD_EOP                     BIT(30)
 216 #define XILINX_MCDMA_BD_SOP                     BIT(31)
 217
 218 /**
 219  * struct xilinx_vdma_desc_hw - Hardware Descriptor
 220  * @next_desc: Next Descriptor Pointer @0x00
 221  * @pad1: Reserved @0x04
 222  * @buf_addr: Buffer address @0x08
 223  * @buf_addr_msb: MSB of Buffer address @0x0C
 224  * @vsize: Vertical Size @0x10
 225  * @hsize: Horizontal Size @0x14
 226  * @stride: Number of bytes between the first
 227  *          pixels of each horizontal line @0x18
 228  */
 229 struct xilinx_vdma_desc_hw {
 230         u32 next_desc;
 231         u32 pad1;
 232         u32 buf_addr;
 233         u32 buf_addr_msb;
 234         u32 vsize;
 235         u32 hsize;
 236         u32 stride;
 237 } __aligned(64);
 238
 239 /**
 240  * struct xilinx_axidma_desc_hw - Hardware Descriptor for AXI DMA
 241  * @next_desc: Next Descriptor Pointer @0x00
 242  * @next_desc_msb: MSB of Next Descriptor Pointer @0x04
 243  * @buf_addr: Buffer address @0x08
 244  * @buf_addr_msb: MSB of Buffer address @0x0C
 245  * @reserved1: Reserved @0x10
 246  * @reserved2: Reserved @0x14
 247  * @control: Control field @0x18
 248  * @status: Status field @0x1C
 249  * @app: APP Fields @0x20 - 0x30
 250  */
 251 struct xilinx_axidma_desc_hw {
 252         u32 next_desc;
 253         u32 next_desc_msb;
 254         u32 buf_addr;
 255         u32 buf_addr_msb;
 256         u32 reserved1;
 257         u32 reserved2;
 258         u32 control;
 259         u32 status;
 260         u32 app[XILINX_DMA_NUM_APP_WORDS];
 261 } __aligned(64);
 262
 263 /**
 264  * struct xilinx_aximcdma_desc_hw - Hardware Descriptor for AXI MCDMA
 265  * @next_desc: Next Descriptor Pointer @0x00
 266  * @next_desc_msb: MSB of Next Descriptor Pointer @0x04
 267  * @buf_addr: Buffer address @0x08
 268  * @buf_addr_msb: MSB of Buffer address @0x0C
 269  * @rsvd: Reserved field @0x10
 270  * @control: Control Information field @0x14
 271  * @status: Status field @0x18
 272  * @sideband_status: Status of sideband signals @0x1C
 273  * @app: APP Fields @0x20 - 0x30
 274  */
 275 struct xilinx_aximcdma_desc_hw {
 276         u32 next_desc;
 277         u32 next_desc_msb;
 278         u32 buf_addr;
 279         u32 buf_addr_msb;
 280         u32 rsvd;
 281         u32 control;
 282         u32 status;
 283         u32 sideband_status;
 284         u32 app[XILINX_DMA_NUM_APP_WORDS];
 285 } __aligned(64);
 286
 287 /**
 288  * struct xilinx_cdma_desc_hw - Hardware Descriptor
 289  * @next_desc: Next Descriptor Pointer @0x00
 290  * @next_desc_msb: Next Descriptor Pointer MSB @0x04
 291  * @src_addr: Source address @0x08
 292  * @src_addr_msb: Source address MSB @0x0C
 293  * @dest_addr: Destination address @0x10
 294  * @dest_addr_msb: Destination address MSB @0x14
 295  * @control: Control field @0x18
 296  * @status: Status field @0x1C
 297  */
 298 struct xilinx_cdma_desc_hw {
 299         u32 next_desc;
 300         u32 next_desc_msb;
 301         u32 src_addr;
 302         u32 src_addr_msb;
 303         u32 dest_addr;
 304         u32 dest_addr_msb;
 305         u32 control;
 306         u32 status;
 307 } __aligned(64);
 308
 309 /**
 310  * struct xilinx_vdma_tx_segment - Descriptor segment
 311  * @hw: Hardware descriptor
 312  * @node: Node in the descriptor segments list
 313  * @phys: Physical address of segment
 314  */
 315 struct xilinx_vdma_tx_segment {
 316         struct xilinx_vdma_desc_hw hw;
 317         struct list_head node;
 318         dma_addr_t phys;
 319 } __aligned(64);
 320
 321 /**
 322  * struct xilinx_axidma_tx_segment - Descriptor segment
 323  * @hw: Hardware descriptor
 324  * @node: Node in the descriptor segments list
 325  * @phys: Physical address of segment
 326  */
 327 struct xilinx_axidma_tx_segment {
 328         struct xilinx_axidma_desc_hw hw;
 329         struct list_head node;
 330         dma_addr_t phys;
 331 } __aligned(64);
 332
 333 /**
 334  * struct xilinx_aximcdma_tx_segment - Descriptor segment
 335  * @hw: Hardware descriptor
 336  * @node: Node in the descriptor segments list
 337  * @phys: Physical address of segment
 338  */
 339 struct xilinx_aximcdma_tx_segment {
 340         struct xilinx_aximcdma_desc_hw hw;
 341         struct list_head node;
 342         dma_addr_t phys;
 343 } __aligned(64);
 344
 345 /**
 346  * struct xilinx_cdma_tx_segment - Descriptor segment
 347  * @hw: Hardware descriptor
 348  * @node: Node in the descriptor segments list
 349  * @phys: Physical address of segment
 350  */
 351 struct xilinx_cdma_tx_segment {
 352         struct xilinx_cdma_desc_hw hw;
 353         struct list_head node;
 354         dma_addr_t phys;
 355 } __aligned(64);
 356
 357 /**
 358  * struct xilinx_dma_tx_descriptor - Per Transaction structure
 359  * @async_tx: Async transaction descriptor
 360  * @segments: TX segments list
 361  * @node: Node in the channel descriptors list
 362  * @cyclic: Check for cyclic transfers.
 363  * @err: Whether the descriptor has an error.
 364  * @residue: Residue of the completed descriptor
 365  */
 366 struct xilinx_dma_tx_descriptor {
 367         struct dma_async_tx_descriptor async_tx;
 368         struct list_head segments;
 369         struct list_head node;
 370         bool cyclic;
 371         bool err;
 372         u32 residue;
 373 };
 374
 375 /**
 376  * struct xilinx_dma_chan - Driver specific DMA channel structure
 377  * @xdev: Driver specific device structure
 378  * @ctrl_offset: Control registers offset
 379  * @desc_offset: TX descriptor registers offset
 380  * @lock: Descriptor operation lock
 381  * @pending_list: Descriptors waiting
 382  * @active_list: Descriptors ready to submit
 383  * @done_list: Complete descriptors
 384  * @free_seg_list: Free descriptors
 385  * @common: DMA common channel
 386  * @desc_pool: Descriptors pool
 387  * @dev: The dma device
 388  * @irq: Channel IRQ
 389  * @id: Channel ID
 390  * @direction: Transfer direction
 391  * @num_frms: Number of frames
 392  * @has_sg: Support scatter transfers
 393  * @cyclic: Check for cyclic transfers.
 394  * @genlock: Support genlock mode
 395  * @err: Channel has errors
 396  * @idle: Check for channel idle
 397  * @tasklet: Cleanup work after irq
 398  * @config: Device configuration info
 399  * @flush_on_fsync: Flush on Frame sync
 400  * @desc_pendingcount: Descriptor pending count
 401  * @ext_addr: Indicates 64 bit addressing is supported by dma channel
 402  * @desc_submitcount: Descriptor h/w submitted count
 403  * @seg_v: Statically allocated segments base
 404  * @seg_mv: Statically allocated segments base for MCDMA
 405  * @seg_p: Physical allocated segments base
 406  * @cyclic_seg_v: Statically allocated segment base for cyclic transfers
 407  * @cyclic_seg_p: Physical allocated segments base for cyclic dma
 408  * @start_transfer: Differentiate b/w DMA IP's transfer
 409  * @stop_transfer: Differentiate b/w DMA IP's quiesce
 410  * @tdest: TDEST value for mcdma
 411  * @has_vflip: S2MM vertical flip
 412  */
 413 struct xilinx_dma_chan {
 414         struct xilinx_dma_device *xdev;
 415         u32 ctrl_offset;
 416         u32 desc_offset;
 417         spinlock_t lock;
 418         struct list_head pending_list;
 419         struct list_head active_list;
 420         struct list_head done_list;
 421         struct list_head free_seg_list;
 422         struct dma_chan common;
 423         struct dma_pool *desc_pool;
 424         struct device *dev;
 425         int irq;
 426         int id;
 427         enum dma_transfer_direction direction;
 428         int num_frms;
 429         bool has_sg;
 430         bool cyclic;
 431         bool genlock;
 432         bool err;
 433         bool idle;
 434         struct tasklet_struct tasklet;
 435         struct xilinx_vdma_config config;
 436         bool flush_on_fsync;
 437         u32 desc_pendingcount;
 438         bool ext_addr;
 439         u32 desc_submitcount;
 440         struct xilinx_axidma_tx_segment *seg_v;
 441         struct xilinx_aximcdma_tx_segment *seg_mv;
 442         dma_addr_t seg_p;
 443         struct xilinx_axidma_tx_segment *cyclic_seg_v;
 444         dma_addr_t cyclic_seg_p;
 445         void (*start_transfer)(struct xilinx_dma_chan *chan);
 446         int (*stop_transfer)(struct xilinx_dma_chan *chan);
 447         u16 tdest;
 448         bool has_vflip;
 449 };
 450
 451 /**
 452  * enum xdma_ip_type - DMA IP type.
 453  *
 454  * @XDMA_TYPE_AXIDMA: Axi dma ip.
 455  * @XDMA_TYPE_CDMA: Axi cdma ip.
 456  * @XDMA_TYPE_VDMA: Axi vdma ip.
 457  * @XDMA_TYPE_AXIMCDMA: Axi MCDMA ip.
 458  *
 459  */
 460 enum xdma_ip_type {
 461         XDMA_TYPE_AXIDMA = 0,
 462         XDMA_TYPE_CDMA,
 463         XDMA_TYPE_VDMA,
 464         XDMA_TYPE_AXIMCDMA
 465 };
 466
 467 struct xilinx_dma_config {
 468         enum xdma_ip_type dmatype;
 469         int (*clk_init)(struct platform_device *pdev, struct clk **axi_clk,
 470                         struct clk **tx_clk, struct clk **txs_clk,
 471                         struct clk **rx_clk, struct clk **rxs_clk);
 472         irqreturn_t (*irq_handler)(int irq, void *data);
 473         const int max_channels;
 474 };
 475
 476 /**
 477  * struct xilinx_dma_device - DMA device structure
 478  * @regs: I/O mapped base address
 479  * @dev: Device Structure
 480  * @common: DMA device structure
 481  * @chan: Driver specific DMA channel
 482  * @flush_on_fsync: Flush on frame sync
 483  * @ext_addr: Indicates 64 bit addressing is supported by dma device
 484  * @pdev: Platform device structure pointer
 485  * @dma_config: DMA config structure
 486  * @axi_clk: DMA Axi4-lite interace clock
 487  * @tx_clk: DMA mm2s clock
 488  * @txs_clk: DMA mm2s stream clock
 489  * @rx_clk: DMA s2mm clock
 490  * @rxs_clk: DMA s2mm stream clock
 491  * @s2mm_chan_id: DMA s2mm channel identifier
 492  * @mm2s_chan_id: DMA mm2s channel identifier
 493  * @max_buffer_len: Max buffer length
 494  */
 495 struct xilinx_dma_device {
 496         void __iomem *regs;
 497         struct device *dev;
 498         struct dma_device common;
 499         struct xilinx_dma_chan *chan[XILINX_MCDMA_MAX_CHANS_PER_DEVICE];
 500         u32 flush_on_fsync;
 501         bool ext_addr;
 502         struct platform_device  *pdev;
 503         const struct xilinx_dma_config *dma_config;
 504         struct clk *axi_clk;
 505         struct clk *tx_clk;
 506         struct clk *txs_clk;
 507         struct clk *rx_clk;
 508         struct clk *rxs_clk;
 509         u32 s2mm_chan_id;
 510         u32 mm2s_chan_id;
 511         u32 max_buffer_len;
 512 };
 513
 514 /* Macros */
 515 #define to_xilinx_chan(chan) \
 516         container_of(chan, struct xilinx_dma_chan, common)
 517 #define to_dma_tx_descriptor(tx) \
 518         container_of(tx, struct xilinx_dma_tx_descriptor, async_tx)
 519 #define xilinx_dma_poll_timeout(chan, reg, val, cond, delay_us, timeout_us) \
 520         readl_poll_timeout(chan->xdev->regs + chan->ctrl_offset + reg, val, \
 521                            cond, delay_us, timeout_us)
 522
 523 /* IO accessors */
 524 static inline u32 dma_read(struct xilinx_dma_chan *chan, u32 reg)
 525 {
 526         return ioread32(chan->xdev->regs + reg);
 527 }
 528
 529 static inline void dma_write(struct xilinx_dma_chan *chan, u32 reg, u32 value)
 530 {
 531         iowrite32(value, chan->xdev->regs + reg);
 532 }
 533
 534 static inline void vdma_desc_write(struct xilinx_dma_chan *chan, u32 reg,
 535                                    u32 value)
 536 {
 537         dma_write(chan, chan->desc_offset + reg, value);
 538 }
 539
 540 static inline u32 dma_ctrl_read(struct xilinx_dma_chan *chan, u32 reg)
 541 {
 542         return dma_read(chan, chan->ctrl_offset + reg);
 543 }
 544
 545 static inline void dma_ctrl_write(struct xilinx_dma_chan *chan, u32 reg,
 546                                    u32 value)
 547 {
 548         dma_write(chan, chan->ctrl_offset + reg, value);
 549 }
 550
 551 static inline void dma_ctrl_clr(struct xilinx_dma_chan *chan, u32 reg,
 552                                  u32 clr)
 553 {
 554         dma_ctrl_write(chan, reg, dma_ctrl_read(chan, reg) & ~clr);
 555 }
 556
 557 static inline void dma_ctrl_set(struct xilinx_dma_chan *chan, u32 reg,
 558                                  u32 set)
 559 {
 560         dma_ctrl_write(chan, reg, dma_ctrl_read(chan, reg) | set);
 561 }
 562
 563 /**
 564  * vdma_desc_write_64 - 64-bit descriptor write
 565  * @chan: Driver specific VDMA channel
 566  * @reg: Register to write
 567  * @value_lsb: lower address of the descriptor.
 568  * @value_msb: upper address of the descriptor.
 569  *
 570  * Since vdma driver is trying to write to a register offset which is not a
 571  * multiple of 64 bits(ex : 0x5c), we are writing as two separate 32 bits
 572  * instead of a single 64 bit register write.
 573  */
 574 static inline void vdma_desc_write_64(struct xilinx_dma_chan *chan, u32 reg,
 575                                       u32 value_lsb, u32 value_msb)
 576 {
 577         /* Write the lsb 32 bits*/
 578         writel(value_lsb, chan->xdev->regs + chan->desc_offset + reg);
 579
 580         /* Write the msb 32 bits */
 581         writel(value_msb, chan->xdev->regs + chan->desc_offset + reg + 4);
 582 }
 583
 584 static inline void dma_writeq(struct xilinx_dma_chan *chan, u32 reg, u64 value)
 585 {
 586         lo_hi_writeq(value, chan->xdev->regs + chan->ctrl_offset + reg);
 587 }
 588
 589 static inline void xilinx_write(struct xilinx_dma_chan *chan, u32 reg,
 590                                 dma_addr_t addr)
 591 {
 592         if (chan->ext_addr)
 593                 dma_writeq(chan, reg, addr);
 594         else
 595                 dma_ctrl_write(chan, reg, addr);
 596 }
 597
 598 static inline void xilinx_axidma_buf(struct xilinx_dma_chan *chan,
 599                                      struct xilinx_axidma_desc_hw *hw,
 600                                      dma_addr_t buf_addr, size_t sg_used,
 601                                      size_t period_len)
 602 {
 603         if (chan->ext_addr) {
 604                 hw->buf_addr = lower_32_bits(buf_addr + sg_used + period_len);
 605                 hw->buf_addr_msb = upper_32_bits(buf_addr + sg_used +
 606                                                  period_len);
 607         } else {
 608                 hw->buf_addr = buf_addr + sg_used + period_len;
 609         }
 610 }
 611
 612 static inline void xilinx_aximcdma_buf(struct xilinx_dma_chan *chan,
 613                                        struct xilinx_aximcdma_desc_hw *hw,
 614                                        dma_addr_t buf_addr, size_t sg_used)
 615 {
 616         if (chan->ext_addr) {
 617                 hw->buf_addr = lower_32_bits(buf_addr + sg_used);
 618                 hw->buf_addr_msb = upper_32_bits(buf_addr + sg_used);
 619         } else {
 620                 hw->buf_addr = buf_addr + sg_used;
 621         }
 622 }
 623
 624 /* -----------------------------------------------------------------------------
 625  * Descriptors and segments alloc and free
 626  */
 627
 628 /**
 629  * xilinx_vdma_alloc_tx_segment - Allocate transaction segment
 630  * @chan: Driver specific DMA channel
 631  *
 632  * Return: The allocated segment on success and NULL on failure.
 633  */
 634 static struct xilinx_vdma_tx_segment *
 635 xilinx_vdma_alloc_tx_segment(struct xilinx_dma_chan *chan)
 636 {
 637         struct xilinx_vdma_tx_segment *segment;
 638         dma_addr_t phys;
 639
 640         segment = dma_pool_zalloc(chan->desc_pool, GFP_ATOMIC, &phys);
 641         if (!segment)
 642                 return NULL;
 643
 644         segment->phys = phys;
 645
 646         return segment;
 647 }
 648
 649 /**
 650  * xilinx_cdma_alloc_tx_segment - Allocate transaction segment
 651  * @chan: Driver specific DMA channel
 652  *
 653  * Return: The allocated segment on success and NULL on failure.
 654  */
 655 static struct xilinx_cdma_tx_segment *
 656 xilinx_cdma_alloc_tx_segment(struct xilinx_dma_chan *chan)
 657 {
 658         struct xilinx_cdma_tx_segment *segment;
 659         dma_addr_t phys;
 660
 661         segment = dma_pool_zalloc(chan->desc_pool, GFP_ATOMIC, &phys);
 662         if (!segment)
 663                 return NULL;
 664
 665         segment->phys = phys;
 666
 667         return segment;
 668 }
 669
 670 /**
 671  * xilinx_axidma_alloc_tx_segment - Allocate transaction segment
 672  * @chan: Driver specific DMA channel
 673  *
 674  * Return: The allocated segment on success and NULL on failure.
 675  */
 676 static struct xilinx_axidma_tx_segment *
 677 xilinx_axidma_alloc_tx_segment(struct xilinx_dma_chan *chan)
 678 {
 679         struct xilinx_axidma_tx_segment *segment = NULL;
 680         unsigned long flags;
 681
 682         spin_lock_irqsave(&chan->lock, flags);
 683         if (!list_empty(&chan->free_seg_list)) {
 684                 segment = list_first_entry(&chan->free_seg_list,
 685                                            struct xilinx_axidma_tx_segment,
 686                                            node);
 687                 list_del(&segment->node);
 688         }
 689         spin_unlock_irqrestore(&chan->lock, flags);
 690
 691         if (!segment)
 692                 dev_dbg(chan->dev, "Could not find free tx segment\n");
 693
 694         return segment;
 695 }
 696
 697 /**
 698  * xilinx_aximcdma_alloc_tx_segment - Allocate transaction segment
 699  * @chan: Driver specific DMA channel
 700  *
 701  * Return: The allocated segment on success and NULL on failure.
 702  */
 703 static struct xilinx_aximcdma_tx_segment *
 704 xilinx_aximcdma_alloc_tx_segment(struct xilinx_dma_chan *chan)
 705 {
 706         struct xilinx_aximcdma_tx_segment *segment = NULL;
 707         unsigned long flags;
 708
 709         spin_lock_irqsave(&chan->lock, flags);
 710         if (!list_empty(&chan->free_seg_list)) {
 711                 segment = list_first_entry(&chan->free_seg_list,
 712                                            struct xilinx_aximcdma_tx_segment,
 713                                            node);
 714                 list_del(&segment->node);
 715         }
 716         spin_unlock_irqrestore(&chan->lock, flags);
 717
 718         return segment;
 719 }
 720
 721 static void xilinx_dma_clean_hw_desc(struct xilinx_axidma_desc_hw *hw)
 722 {
 723         u32 next_desc = hw->next_desc;
 724         u32 next_desc_msb = hw->next_desc_msb;
 725
 726         memset(hw, 0, sizeof(struct xilinx_axidma_desc_hw));
 727
 728         hw->next_desc = next_desc;
 729         hw->next_desc_msb = next_desc_msb;
 730 }
 731
 732 static void xilinx_mcdma_clean_hw_desc(struct xilinx_aximcdma_desc_hw *hw)
 733 {
 734         u32 next_desc = hw->next_desc;
 735         u32 next_desc_msb = hw->next_desc_msb;
 736
 737         memset(hw, 0, sizeof(struct xilinx_aximcdma_desc_hw));
 738
 739         hw->next_desc = next_desc;
 740         hw->next_desc_msb = next_desc_msb;
 741 }
 742
 743 /**
 744  * xilinx_dma_free_tx_segment - Free transaction segment
 745  * @chan: Driver specific DMA channel
 746  * @segment: DMA transaction segment
 747  */
 748 static void xilinx_dma_free_tx_segment(struct xilinx_dma_chan *chan,
 749                                 struct xilinx_axidma_tx_segment *segment)
 750 {
 751         xilinx_dma_clean_hw_desc(&segment->hw);
 752
 753         list_add_tail(&segment->node, &chan->free_seg_list);
 754 }
 755
 756 /**
 757  * xilinx_mcdma_free_tx_segment - Free transaction segment
 758  * @chan: Driver specific DMA channel
 759  * @segment: DMA transaction segment
 760  */
 761 static void xilinx_mcdma_free_tx_segment(struct xilinx_dma_chan *chan,
 762                                          struct xilinx_aximcdma_tx_segment *
 763                                          segment)
 764 {
 765         xilinx_mcdma_clean_hw_desc(&segment->hw);
 766
 767         list_add_tail(&segment->node, &chan->free_seg_list);
 768 }
 769
 770 /**
 771  * xilinx_cdma_free_tx_segment - Free transaction segment
 772  * @chan: Driver specific DMA channel
 773  * @segment: DMA transaction segment
 774  */
 775 static void xilinx_cdma_free_tx_segment(struct xilinx_dma_chan *chan,
 776                                 struct xilinx_cdma_tx_segment *segment)
 777 {
 778         dma_pool_free(chan->desc_pool, segment, segment->phys);
 779 }
 780
 781 /**
 782  * xilinx_vdma_free_tx_segment - Free transaction segment
 783  * @chan: Driver specific DMA channel
 784  * @segment: DMA transaction segment
 785  */
 786 static void xilinx_vdma_free_tx_segment(struct xilinx_dma_chan *chan,
 787                                         struct xilinx_vdma_tx_segment *segment)
 788 {
 789         dma_pool_free(chan->desc_pool, segment, segment->phys);
 790 }
 791
 792 /**
 793  * xilinx_dma_tx_descriptor - Allocate transaction descriptor
 794  * @chan: Driver specific DMA channel
 795  *
 796  * Return: The allocated descriptor on success and NULL on failure.
 797  */
 798 static struct xilinx_dma_tx_descriptor *
 799 xilinx_dma_alloc_tx_descriptor(struct xilinx_dma_chan *chan)
 800 {
 801         struct xilinx_dma_tx_descriptor *desc;
 802
 803         desc = kzalloc(sizeof(*desc), GFP_KERNEL);
 804         if (!desc)
 805                 return NULL;
 806
 807         INIT_LIST_HEAD(&desc->segments);
 808
 809         return desc;
 810 }
 811
 812 /**
 813  * xilinx_dma_free_tx_descriptor - Free transaction descriptor
 814  * @chan: Driver specific DMA channel
 815  * @desc: DMA transaction descriptor
 816  */
 817 static void
 818 xilinx_dma_free_tx_descriptor(struct xilinx_dma_chan *chan,
 819                                struct xilinx_dma_tx_descriptor *desc)
 820 {
 821         struct xilinx_vdma_tx_segment *segment, *next;
 822         struct xilinx_cdma_tx_segment *cdma_segment, *cdma_next;
 823         struct xilinx_axidma_tx_segment *axidma_segment, *axidma_next;
 824         struct xilinx_aximcdma_tx_segment *aximcdma_segment, *aximcdma_next;
 825
 826         if (!desc)
 827                 return;
 828
 829         if (chan->xdev->dma_config->dmatype == XDMA_TYPE_VDMA) {
 830                 list_for_each_entry_safe(segment, next, &desc->segments, node) {
 831                         list_del(&segment->node);
 832                         xilinx_vdma_free_tx_segment(chan, segment);
 833                 }
 834         } else if (chan->xdev->dma_config->dmatype == XDMA_TYPE_CDMA) {
 835                 list_for_each_entry_safe(cdma_segment, cdma_next,
 836                                          &desc->segments, node) {
 837                         list_del(&cdma_segment->node);
 838                         xilinx_cdma_free_tx_segment(chan, cdma_segment);
 839                 }
 840         } else if (chan->xdev->dma_config->dmatype == XDMA_TYPE_AXIDMA) {
 841                 list_for_each_entry_safe(axidma_segment, axidma_next,
 842                                          &desc->segments, node) {
 843                         list_del(&axidma_segment->node);
 844                         xilinx_dma_free_tx_segment(chan, axidma_segment);
 845                 }
 846         } else {
 847                 list_for_each_entry_safe(aximcdma_segment, aximcdma_next,
 848                                          &desc->segments, node) {
 849                         list_del(&aximcdma_segment->node);
 850                         xilinx_mcdma_free_tx_segment(chan, aximcdma_segment);
 851                 }
 852         }
 853
 854         kfree(desc);
 855 }
 856
 857 /* Required functions */
 858
 859 /**
 860  * xilinx_dma_free_desc_list - Free descriptors list
 861  * @chan: Driver specific DMA channel
 862  * @list: List to parse and delete the descriptor
 863  */
 864 static void xilinx_dma_free_desc_list(struct xilinx_dma_chan *chan,
 865                                         struct list_head *list)
 866 {
 867         struct xilinx_dma_tx_descriptor *desc, *next;
 868
 869         list_for_each_entry_safe(desc, next, list, node) {
 870                 list_del(&desc->node);
 871                 xilinx_dma_free_tx_descriptor(chan, desc);
 872         }
 873 }
 874
 875 /**
 876  * xilinx_dma_free_descriptors - Free channel descriptors
 877  * @chan: Driver specific DMA channel
 878  */
 879 static void xilinx_dma_free_descriptors(struct xilinx_dma_chan *chan)
 880 {
 881         unsigned long flags;
 882
 883         spin_lock_irqsave(&chan->lock, flags);
 884
 885         xilinx_dma_free_desc_list(chan, &chan->pending_list);
 886         xilinx_dma_free_desc_list(chan, &chan->done_list);
 887         xilinx_dma_free_desc_list(chan, &chan->active_list);
 888
 889         spin_unlock_irqrestore(&chan->lock, flags);
 890 }
 891
 892 /**
 893  * xilinx_dma_free_chan_resources - Free channel resources
 894  * @dchan: DMA channel
 895  */
 896 static void xilinx_dma_free_chan_resources(struct dma_chan *dchan)
 897 {
 898         struct xilinx_dma_chan *chan = to_xilinx_chan(dchan);
 899         unsigned long flags;
 900
 901         dev_dbg(chan->dev, "Free all channel resources.\n");
 902
 903         xilinx_dma_free_descriptors(chan);
 904
 905         if (chan->xdev->dma_config->dmatype == XDMA_TYPE_AXIDMA) {
 906                 spin_lock_irqsave(&chan->lock, flags);
 907                 INIT_LIST_HEAD(&chan->free_seg_list);
 908                 spin_unlock_irqrestore(&chan->lock, flags);
 909
 910                 /* Free memory that is allocated for BD */
 911                 dma_free_coherent(chan->dev, sizeof(*chan->seg_v) *
 912                                   XILINX_DMA_NUM_DESCS, chan->seg_v,
 913                                   chan->seg_p);
 914
 915                 /* Free Memory that is allocated for cyclic DMA Mode */
 916                 dma_free_coherent(chan->dev, sizeof(*chan->cyclic_seg_v),
 917                                   chan->cyclic_seg_v, chan->cyclic_seg_p);
 918         }
 919
 920         if (chan->xdev->dma_config->dmatype == XDMA_TYPE_AXIMCDMA) {
 921                 spin_lock_irqsave(&chan->lock, flags);
 922                 INIT_LIST_HEAD(&chan->free_seg_list);
 923                 spin_unlock_irqrestore(&chan->lock, flags);
 924
 925                 /* Free memory that is allocated for BD */
 926                 dma_free_coherent(chan->dev, sizeof(*chan->seg_mv) *
 927                                   XILINX_DMA_NUM_DESCS, chan->seg_mv,
 928                                   chan->seg_p);
 929         }
 930
 931         if (chan->xdev->dma_config->dmatype != XDMA_TYPE_AXIDMA &&
 932             chan->xdev->dma_config->dmatype != XDMA_TYPE_AXIMCDMA) {
 933                 dma_pool_destroy(chan->desc_pool);
 934                 chan->desc_pool = NULL;
 935         }
 936
 937 }
 938
 939 /**
 940  * xilinx_dma_get_residue - Compute residue for a given descriptor
 941  * @chan: Driver specific dma channel
 942  * @desc: dma transaction descriptor
 943  *
 944  * Return: The number of residue bytes for the descriptor.
 945  */
 946 static u32 xilinx_dma_get_residue(struct xilinx_dma_chan *chan,
 947                                   struct xilinx_dma_tx_descriptor *desc)
 948 {
 949         struct xilinx_cdma_tx_segment *cdma_seg;
 950         struct xilinx_axidma_tx_segment *axidma_seg;
 951         struct xilinx_cdma_desc_hw *cdma_hw;
 952         struct xilinx_axidma_desc_hw *axidma_hw;
 953         struct list_head *entry;
 954         u32 residue = 0;
 955
 956         list_for_each(entry, &desc->segments) {
 957                 if (chan->xdev->dma_config->dmatype == XDMA_TYPE_CDMA) {
 958                         cdma_seg = list_entry(entry,
 959                                               struct xilinx_cdma_tx_segment,
 960                                               node);
 961                         cdma_hw = &cdma_seg->hw;
 962                         residue += (cdma_hw->control - cdma_hw->status) &
 963                                    chan->xdev->max_buffer_len;
 964                 } else {
 965                         axidma_seg = list_entry(entry,
 966                                                 struct xilinx_axidma_tx_segment,
 967                                                 node);
 968                         axidma_hw = &axidma_seg->hw;
 969                         residue += (axidma_hw->control - axidma_hw->status) &
 970                                    chan->xdev->max_buffer_len;
 971                 }
 972         }
 973
 974         return residue;
 975 }
 976
 977 /**
 978  * xilinx_dma_chan_handle_cyclic - Cyclic dma callback
 979  * @chan: Driver specific dma channel
 980  * @desc: dma transaction descriptor
 981  * @flags: flags for spin lock
 982  */
 983 static void xilinx_dma_chan_handle_cyclic(struct xilinx_dma_chan *chan,
 984                                           struct xilinx_dma_tx_descriptor *desc,
 985                                           unsigned long *flags)
 986 {
 987         dma_async_tx_callback callback;
 988         void *callback_param;
 989
 990         callback = desc->async_tx.callback;
 991         callback_param = desc->async_tx.callback_param;
 992         if (callback) {
 993                 spin_unlock_irqrestore(&chan->lock, *flags);
 994                 callback(callback_param);
 995                 spin_lock_irqsave(&chan->lock, *flags);
 996         }
 997 }
 998
 999 /**
1000  * xilinx_dma_chan_desc_cleanup - Clean channel descriptors
1001  * @chan: Driver specific DMA channel
1002  */
1003 static void xilinx_dma_chan_desc_cleanup(struct xilinx_dma_chan *chan)
1004 {
1005         struct xilinx_dma_tx_descriptor *desc, *next;
1006         unsigned long flags;
1007
1008         spin_lock_irqsave(&chan->lock, flags);
1009
1010         list_for_each_entry_safe(desc, next, &chan->done_list, node) {
1011                 struct dmaengine_result result;
1012
1013                 if (desc->cyclic) {
1014                         xilinx_dma_chan_handle_cyclic(chan, desc, &flags);
1015                         break;
1016                 }
1017
1018                 /* Remove from the list of running transactions */
1019                 list_del(&desc->node);
1020
1021                 if (unlikely(desc->err)) {
1022                         if (chan->direction == DMA_DEV_TO_MEM)
1023                                 result.result = DMA_TRANS_READ_FAILED;
1024                         else
1025                                 result.result = DMA_TRANS_WRITE_FAILED;
1026                 } else {
1027                         result.result = DMA_TRANS_NOERROR;
1028                 }
1029
1030                 result.residue = desc->residue;
1031
1032                 /* Run the link descriptor callback function */
1033                 spin_unlock_irqrestore(&chan->lock, flags);
1034                 dmaengine_desc_get_callback_invoke(&desc->async_tx, &result);
1035                 spin_lock_irqsave(&chan->lock, flags);
1036
1037                 /* Run any dependencies, then free the descriptor */
1038                 dma_run_dependencies(&desc->async_tx);
1039                 xilinx_dma_free_tx_descriptor(chan, desc);
1040         }
1041
1042         spin_unlock_irqrestore(&chan->lock, flags);
1043 }
1044
1045 /**
1046  * xilinx_dma_do_tasklet - Schedule completion tasklet
1047  * @t: Pointer to the Xilinx DMA channel structure
1048  */
1049 static void xilinx_dma_do_tasklet(struct tasklet_struct *t)
1050 {
1051         struct xilinx_dma_chan *chan = from_tasklet(chan, t, tasklet);
1052
1053         xilinx_dma_chan_desc_cleanup(chan);
1054 }
1055
1056 /**
1057  * xilinx_dma_alloc_chan_resources - Allocate channel resources
1058  * @dchan: DMA channel
1059  *
1060  * Return: '0' on success and failure value on error
1061  */
1062 static int xilinx_dma_alloc_chan_resources(struct dma_chan *dchan)
1063 {
1064         struct xilinx_dma_chan *chan = to_xilinx_chan(dchan);
1065         int i;
1066
1067         /* Has this channel already been allocated? */
1068         if (chan->desc_pool)
1069                 return 0;
1070
1071         /*
1072          * We need the descriptor to be aligned to 64bytes
1073          * for meeting Xilinx VDMA specification requirement.
1074          */
1075         if (chan->xdev->dma_config->dmatype == XDMA_TYPE_AXIDMA) {
1076                 /* Allocate the buffer descriptors. */
1077                 chan->seg_v = dma_alloc_coherent(chan->dev,
1078                                                  sizeof(*chan->seg_v) * XILINX_DMA_NUM_DESCS,
1079                                                  &chan->seg_p, GFP_KERNEL);
1080                 if (!chan->seg_v) {
1081                         dev_err(chan->dev,
1082                                 "unable to allocate channel %d descriptors\n",
1083                                 chan->id);
1084                         return -ENOMEM;
1085                 }
1086                 /*
1087                  * For cyclic DMA mode we need to program the tail Descriptor
1088                  * register with a value which is not a part of the BD chain
1089                  * so allocating a desc segment during channel allocation for
1090                  * programming tail descriptor.
1091                  */
1092                 chan->cyclic_seg_v = dma_alloc_coherent(chan->dev,
1093                                                         sizeof(*chan->cyclic_seg_v),
1094                                                         &chan->cyclic_seg_p,
1095                                                         GFP_KERNEL);
1096                 if (!chan->cyclic_seg_v) {
1097                         dev_err(chan->dev,
1098                                 "unable to allocate desc segment for cyclic DMA\n");
1099                         dma_free_coherent(chan->dev, sizeof(*chan->seg_v) *
1100                                 XILINX_DMA_NUM_DESCS, chan->seg_v,
1101                                 chan->seg_p);
1102                         return -ENOMEM;
1103                 }
1104                 chan->cyclic_seg_v->phys = chan->cyclic_seg_p;
1105
1106                 for (i = 0; i < XILINX_DMA_NUM_DESCS; i++) {
1107                         chan->seg_v[i].hw.next_desc =
1108                         lower_32_bits(chan->seg_p + sizeof(*chan->seg_v) *
1109                                 ((i + 1) % XILINX_DMA_NUM_DESCS));
1110                         chan->seg_v[i].hw.next_desc_msb =
1111                         upper_32_bits(chan->seg_p + sizeof(*chan->seg_v) *
1112                                 ((i + 1) % XILINX_DMA_NUM_DESCS));
1113                         chan->seg_v[i].phys = chan->seg_p +
1114                                 sizeof(*chan->seg_v) * i;
1115                         list_add_tail(&chan->seg_v[i].node,
1116                                       &chan->free_seg_list);
1117                 }
1118         } else if (chan->xdev->dma_config->dmatype == XDMA_TYPE_AXIMCDMA) {
1119                 /* Allocate the buffer descriptors. */
1120                 chan->seg_mv = dma_alloc_coherent(chan->dev,
1121                                                   sizeof(*chan->seg_mv) *
1122                                                   XILINX_DMA_NUM_DESCS,
1123                                                   &chan->seg_p, GFP_KERNEL);
1124                 if (!chan->seg_mv) {
1125                         dev_err(chan->dev,
1126                                 "unable to allocate channel %d descriptors\n",
1127                                 chan->id);
1128                         return -ENOMEM;
1129                 }
1130                 for (i = 0; i < XILINX_DMA_NUM_DESCS; i++) {
1131                         chan->seg_mv[i].hw.next_desc =
1132                         lower_32_bits(chan->seg_p + sizeof(*chan->seg_mv) *
1133                                 ((i + 1) % XILINX_DMA_NUM_DESCS));
1134                         chan->seg_mv[i].hw.next_desc_msb =
1135                         upper_32_bits(chan->seg_p + sizeof(*chan->seg_mv) *
1136                                 ((i + 1) % XILINX_DMA_NUM_DESCS));
1137                         chan->seg_mv[i].phys = chan->seg_p +
1138                                 sizeof(*chan->seg_v) * i;
1139                         list_add_tail(&chan->seg_mv[i].node,
1140                                       &chan->free_seg_list);
1141                 }
1142         } else if (chan->xdev->dma_config->dmatype == XDMA_TYPE_CDMA) {
1143                 chan->desc_pool = dma_pool_create("xilinx_cdma_desc_pool",
1144                                    chan->dev,
1145                                    sizeof(struct xilinx_cdma_tx_segment),
1146                                    __alignof__(struct xilinx_cdma_tx_segment),
1147                                    0);
1148         } else {
1149                 chan->desc_pool = dma_pool_create("xilinx_vdma_desc_pool",
1150                                      chan->dev,
1151                                      sizeof(struct xilinx_vdma_tx_segment),
1152                                      __alignof__(struct xilinx_vdma_tx_segment),
1153                                      0);
1154         }
1155
1156         if (!chan->desc_pool &&
1157             ((chan->xdev->dma_config->dmatype != XDMA_TYPE_AXIDMA) &&
1158                 chan->xdev->dma_config->dmatype != XDMA_TYPE_AXIMCDMA)) {
1159                 dev_err(chan->dev,
1160                         "unable to allocate channel %d descriptor pool\n",
1161                         chan->id);
1162                 return -ENOMEM;
1163         }
1164
1165         dma_cookie_init(dchan);
1166
1167         if (chan->xdev->dma_config->dmatype == XDMA_TYPE_AXIDMA) {
1168                 /* For AXI DMA resetting once channel will reset the
1169                  * other channel as well so enable the interrupts here.
1170                  */
1171                 dma_ctrl_set(chan, XILINX_DMA_REG_DMACR,
1172                               XILINX_DMA_DMAXR_ALL_IRQ_MASK);
1173         }
1174
1175         if ((chan->xdev->dma_config->dmatype == XDMA_TYPE_CDMA) && chan->has_sg)
1176                 dma_ctrl_set(chan, XILINX_DMA_REG_DMACR,
1177                              XILINX_CDMA_CR_SGMODE);
1178
1179         return 0;
1180 }
1181
1182 /**
1183  * xilinx_dma_calc_copysize - Calculate the amount of data to copy
1184  * @chan: Driver specific DMA channel
1185  * @size: Total data that needs to be copied
1186  * @done: Amount of data that has been already copied
1187  *
1188  * Return: Amount of data that has to be copied
1189  */
1190 static int xilinx_dma_calc_copysize(struct xilinx_dma_chan *chan,
1191                                     int size, int done)
1192 {
1193         size_t copy;
1194
1195         copy = min_t(size_t, size - done,
1196                      chan->xdev->max_buffer_len);
1197
1198         if ((copy + done < size) &&
1199             chan->xdev->common.copy_align) {
1200                 /*
1201                  * If this is not the last descriptor, make sure
1202                  * the next one will be properly aligned
1203                  */
1204                 copy = rounddown(copy,
1205                                  (1 << chan->xdev->common.copy_align));
1206         }
1207         return copy;
1208 }
1209
1210 /**
1211  * xilinx_dma_tx_status - Get DMA transaction status
1212  * @dchan: DMA channel
1213  * @cookie: Transaction identifier
1214  * @txstate: Transaction state
1215  *
1216  * Return: DMA transaction status
1217  */
1218 static enum dma_status xilinx_dma_tx_status(struct dma_chan *dchan,
1219                                         dma_cookie_t cookie,
1220                                         struct dma_tx_state *txstate)
1221 {
1222         struct xilinx_dma_chan *chan = to_xilinx_chan(dchan);
1223         struct xilinx_dma_tx_descriptor *desc;
1224         enum dma_status ret;
1225         unsigned long flags;
1226         u32 residue = 0;
1227
1228         ret = dma_cookie_status(dchan, cookie, txstate);
1229         if (ret == DMA_COMPLETE || !txstate)
1230                 return ret;
1231
1232         spin_lock_irqsave(&chan->lock, flags);
1233         if (!list_empty(&chan->active_list)) {
1234                 desc = list_last_entry(&chan->active_list,
1235                                        struct xilinx_dma_tx_descriptor, node);
1236                 /*
1237                  * VDMA and simple mode do not support residue reporting, so the
1238                  * residue field will always be 0.
1239                  */
1240                 if (chan->has_sg && chan->xdev->dma_config->dmatype != XDMA_TYPE_VDMA)
1241                         residue = xilinx_dma_get_residue(chan, desc);
1242         }
1243         spin_unlock_irqrestore(&chan->lock, flags);
1244
1245         dma_set_residue(txstate, residue);
1246
1247         return ret;
1248 }
1249
1250 /**
1251  * xilinx_dma_stop_transfer - Halt DMA channel
1252  * @chan: Driver specific DMA channel
1253  *
1254  * Return: '0' on success and failure value on error
1255  */
1256 static int xilinx_dma_stop_transfer(struct xilinx_dma_chan *chan)
1257 {
1258         u32 val;
1259
1260         dma_ctrl_clr(chan, XILINX_DMA_REG_DMACR, XILINX_DMA_DMACR_RUNSTOP);
1261
1262         /* Wait for the hardware to halt */
1263         return xilinx_dma_poll_timeout(chan, XILINX_DMA_REG_DMASR, val,
1264                                        val & XILINX_DMA_DMASR_HALTED, 0,
1265                                        XILINX_DMA_LOOP_COUNT);
1266 }
1267
1268 /**
1269  * xilinx_cdma_stop_transfer - Wait for the current transfer to complete
1270  * @chan: Driver specific DMA channel
1271  *
1272  * Return: '0' on success and failure value on error
1273  */
1274 static int xilinx_cdma_stop_transfer(struct xilinx_dma_chan *chan)
1275 {
1276         u32 val;
1277
1278         return xilinx_dma_poll_timeout(chan, XILINX_DMA_REG_DMASR, val,
1279                                        val & XILINX_DMA_DMASR_IDLE, 0,
1280                                        XILINX_DMA_LOOP_COUNT);
1281 }
1282
1283 /**
1284  * xilinx_dma_start - Start DMA channel
1285  * @chan: Driver specific DMA channel
1286  */
1287 static void xilinx_dma_start(struct xilinx_dma_chan *chan)
1288 {
1289         int err;
1290         u32 val;
1291
1292         dma_ctrl_set(chan, XILINX_DMA_REG_DMACR, XILINX_DMA_DMACR_RUNSTOP);
1293
1294         /* Wait for the hardware to start */
1295         err = xilinx_dma_poll_timeout(chan, XILINX_DMA_REG_DMASR, val,
1296                                       !(val & XILINX_DMA_DMASR_HALTED), 0,
1297                                       XILINX_DMA_LOOP_COUNT);
1298
1299         if (err) {
1300                 dev_err(chan->dev, "Cannot start channel %p: %x\n",
1301                         chan, dma_ctrl_read(chan, XILINX_DMA_REG_DMASR));
1302
1303                 chan->err = true;
1304         }
1305 }
1306
1307 /**
1308  * xilinx_vdma_start_transfer - Starts VDMA transfer
1309  * @chan: Driver specific channel struct pointer
1310  */
1311 static void xilinx_vdma_start_transfer(struct xilinx_dma_chan *chan)
1312 {
1313         struct xilinx_vdma_config *config = &chan->config;
1314         struct xilinx_dma_tx_descriptor *desc;
1315         u32 reg, j;
1316         struct xilinx_vdma_tx_segment *segment, *last = NULL;
1317         int i = 0;
1318
1319         /* This function was invoked with lock held */
1320         if (chan->err)
1321                 return;
1322
1323         if (!chan->idle)
1324                 return;
1325
1326         if (list_empty(&chan->pending_list))
1327                 return;
1328
1329         desc = list_first_entry(&chan->pending_list,
1330                                 struct xilinx_dma_tx_descriptor, node);
1331
1332         /* Configure the hardware using info in the config structure */
1333         if (chan->has_vflip) {
1334                 reg = dma_read(chan, XILINX_VDMA_REG_ENABLE_VERTICAL_FLIP);
1335                 reg &= ~XILINX_VDMA_ENABLE_VERTICAL_FLIP;
1336                 reg |= config->vflip_en;
1337                 dma_write(chan, XILINX_VDMA_REG_ENABLE_VERTICAL_FLIP,
1338                           reg);
1339         }
1340
1341         reg = dma_ctrl_read(chan, XILINX_DMA_REG_DMACR);
1342
1343         if (config->frm_cnt_en)
1344                 reg |= XILINX_DMA_DMACR_FRAMECNT_EN;
1345         else
1346                 reg &= ~XILINX_DMA_DMACR_FRAMECNT_EN;
1347
1348         /* If not parking, enable circular mode */
1349         if (config->park)
1350                 reg &= ~XILINX_DMA_DMACR_CIRC_EN;
1351         else
1352                 reg |= XILINX_DMA_DMACR_CIRC_EN;
1353
1354         dma_ctrl_write(chan, XILINX_DMA_REG_DMACR, reg);
1355
1356         j = chan->desc_submitcount;
1357         reg = dma_read(chan, XILINX_DMA_REG_PARK_PTR);
1358         if (chan->direction == DMA_MEM_TO_DEV) {
1359                 reg &= ~XILINX_DMA_PARK_PTR_RD_REF_MASK;
1360                 reg |= j << XILINX_DMA_PARK_PTR_RD_REF_SHIFT;
1361         } else {
1362                 reg &= ~XILINX_DMA_PARK_PTR_WR_REF_MASK;
1363                 reg |= j << XILINX_DMA_PARK_PTR_WR_REF_SHIFT;
1364         }
1365         dma_write(chan, XILINX_DMA_REG_PARK_PTR, reg);
1366
1367         /* Start the hardware */
1368         xilinx_dma_start(chan);
1369
1370         if (chan->err)
1371                 return;
1372
1373         /* Start the transfer */
1374         if (chan->desc_submitcount < chan->num_frms)
1375                 i = chan->desc_submitcount;
1376
1377         list_for_each_entry(segment, &desc->segments, node) {
1378                 if (chan->ext_addr)
1379                         vdma_desc_write_64(chan,
1380                                    XILINX_VDMA_REG_START_ADDRESS_64(i++),
1381                                    segment->hw.buf_addr,
1382                                    segment->hw.buf_addr_msb);
1383                 else
1384                         vdma_desc_write(chan,
1385                                         XILINX_VDMA_REG_START_ADDRESS(i++),
1386                                         segment->hw.buf_addr);
1387
1388                 last = segment;
1389         }
1390
1391         if (!last)
1392                 return;
1393
1394         /* HW expects these parameters to be same for one transaction */
1395         vdma_desc_write(chan, XILINX_DMA_REG_HSIZE, last->hw.hsize);
1396         vdma_desc_write(chan, XILINX_DMA_REG_FRMDLY_STRIDE,
1397                         last->hw.stride);
1398         vdma_desc_write(chan, XILINX_DMA_REG_VSIZE, last->hw.vsize);
1399
1400         chan->desc_submitcount++;
1401         chan->desc_pendingcount--;
1402         list_del(&desc->node);
1403         list_add_tail(&desc->node, &chan->active_list);
1404         if (chan->desc_submitcount == chan->num_frms)
1405                 chan->desc_submitcount = 0;
1406
1407         chan->idle = false;
1408 }
1409
1410 /**
1411  * xilinx_cdma_start_transfer - Starts cdma transfer
1412  * @chan: Driver specific channel struct pointer
1413  */
1414 static void xilinx_cdma_start_transfer(struct xilinx_dma_chan *chan)
1415 {
1416         struct xilinx_dma_tx_descriptor *head_desc, *tail_desc;
1417         struct xilinx_cdma_tx_segment *tail_segment;
1418         u32 ctrl_reg = dma_read(chan, XILINX_DMA_REG_DMACR);
1419
1420         if (chan->err)
1421                 return;
1422
1423         if (!chan->idle)
1424                 return;
1425
1426         if (list_empty(&chan->pending_list))
1427                 return;
1428
1429         head_desc = list_first_entry(&chan->pending_list,
1430                                      struct xilinx_dma_tx_descriptor, node);
1431         tail_desc = list_last_entry(&chan->pending_list,
1432                                     struct xilinx_dma_tx_descriptor, node);
1433         tail_segment = list_last_entry(&tail_desc->segments,
1434                                        struct xilinx_cdma_tx_segment, node);
1435
1436         if (chan->desc_pendingcount <= XILINX_DMA_COALESCE_MAX) {
1437                 ctrl_reg &= ~XILINX_DMA_CR_COALESCE_MAX;
1438                 ctrl_reg |= chan->desc_pendingcount <<
1439                                 XILINX_DMA_CR_COALESCE_SHIFT;
1440                 dma_ctrl_write(chan, XILINX_DMA_REG_DMACR, ctrl_reg);
1441         }
1442
1443         if (chan->has_sg) {
1444                 dma_ctrl_clr(chan, XILINX_DMA_REG_DMACR,
1445                              XILINX_CDMA_CR_SGMODE);
1446
1447                 dma_ctrl_set(chan, XILINX_DMA_REG_DMACR,
1448                              XILINX_CDMA_CR_SGMODE);
1449
1450                 xilinx_write(chan, XILINX_DMA_REG_CURDESC,
1451                              head_desc->async_tx.phys);
1452
1453                 /* Update tail ptr register which will start the transfer */
1454                 xilinx_write(chan, XILINX_DMA_REG_TAILDESC,
1455                              tail_segment->phys);
1456         } else {
1457                 /* In simple mode */
1458                 struct xilinx_cdma_tx_segment *segment;
1459                 struct xilinx_cdma_desc_hw *hw;
1460
1461                 segment = list_first_entry(&head_desc->segments,
1462                                            struct xilinx_cdma_tx_segment,
1463                                            node);
1464
1465                 hw = &segment->hw;
1466
1467                 xilinx_write(chan, XILINX_CDMA_REG_SRCADDR,
1468                              xilinx_prep_dma_addr_t(hw->src_addr));
1469                 xilinx_write(chan, XILINX_CDMA_REG_DSTADDR,
1470                              xilinx_prep_dma_addr_t(hw->dest_addr));
1471
1472                 /* Start the transfer */
1473                 dma_ctrl_write(chan, XILINX_DMA_REG_BTT,
1474                                 hw->control & chan->xdev->max_buffer_len);
1475         }
1476
1477         list_splice_tail_init(&chan->pending_list, &chan->active_list);
1478         chan->desc_pendingcount = 0;
1479         chan->idle = false;
1480 }
1481
1482 /**
1483  * xilinx_dma_start_transfer - Starts DMA transfer
1484  * @chan: Driver specific channel struct pointer
1485  */
1486 static void xilinx_dma_start_transfer(struct xilinx_dma_chan *chan)
1487 {
1488         struct xilinx_dma_tx_descriptor *head_desc, *tail_desc;
1489         struct xilinx_axidma_tx_segment *tail_segment;
1490         u32 reg;
1491
1492         if (chan->err)
1493                 return;
1494
1495         if (list_empty(&chan->pending_list))
1496                 return;
1497
1498         if (!chan->idle)
1499                 return;
1500
1501         head_desc = list_first_entry(&chan->pending_list,
1502                                      struct xilinx_dma_tx_descriptor, node);
1503         tail_desc = list_last_entry(&chan->pending_list,
1504                                     struct xilinx_dma_tx_descriptor, node);
1505         tail_segment = list_last_entry(&tail_desc->segments,
1506                                        struct xilinx_axidma_tx_segment, node);
1507
1508         reg = dma_ctrl_read(chan, XILINX_DMA_REG_DMACR);
1509
1510         if (chan->desc_pendingcount <= XILINX_DMA_COALESCE_MAX) {
1511                 reg &= ~XILINX_DMA_CR_COALESCE_MAX;
1512                 reg |= chan->desc_pendingcount <<
1513                                   XILINX_DMA_CR_COALESCE_SHIFT;
1514                 dma_ctrl_write(chan, XILINX_DMA_REG_DMACR, reg);
1515         }
1516
1517         if (chan->has_sg)
1518                 xilinx_write(chan, XILINX_DMA_REG_CURDESC,
1519                              head_desc->async_tx.phys);
1520
1521         xilinx_dma_start(chan);
1522
1523         if (chan->err)
1524                 return;
1525
1526         /* Start the transfer */
1527         if (chan->has_sg) {
1528                 if (chan->cyclic)
1529                         xilinx_write(chan, XILINX_DMA_REG_TAILDESC,
1530                                      chan->cyclic_seg_v->phys);
1531                 else
1532                         xilinx_write(chan, XILINX_DMA_REG_TAILDESC,
1533                                      tail_segment->phys);
1534         } else {
1535                 struct xilinx_axidma_tx_segment *segment;
1536                 struct xilinx_axidma_desc_hw *hw;
1537
1538                 segment = list_first_entry(&head_desc->segments,
1539                                            struct xilinx_axidma_tx_segment,
1540                                            node);
1541                 hw = &segment->hw;
1542
1543                 xilinx_write(chan, XILINX_DMA_REG_SRCDSTADDR,
1544                              xilinx_prep_dma_addr_t(hw->buf_addr));
1545
1546                 /* Start the transfer */
1547                 dma_ctrl_write(chan, XILINX_DMA_REG_BTT,
1548                                hw->control & chan->xdev->max_buffer_len);
1549         }
1550
1551         list_splice_tail_init(&chan->pending_list, &chan->active_list);
1552         chan->desc_pendingcount = 0;
1553         chan->idle = false;
1554 }
1555
1556 /**
1557  * xilinx_mcdma_start_transfer - Starts MCDMA transfer
1558  * @chan: Driver specific channel struct pointer
1559  */
1560 static void xilinx_mcdma_start_transfer(struct xilinx_dma_chan *chan)
1561 {
1562         struct xilinx_dma_tx_descriptor *head_desc, *tail_desc;
1563         struct xilinx_axidma_tx_segment *tail_segment;
1564         u32 reg;
1565
1566         /*
1567          * lock has been held by calling functions, so we don't need it
1568          * to take it here again.
1569          */
1570
1571         if (chan->err)
1572                 return;
1573
1574         if (!chan->idle)
1575                 return;
1576
1577         if (list_empty(&chan->pending_list))
1578                 return;
1579
1580         head_desc = list_first_entry(&chan->pending_list,
1581                                      struct xilinx_dma_tx_descriptor, node);
1582         tail_desc = list_last_entry(&chan->pending_list,
1583                                     struct xilinx_dma_tx_descriptor, node);
1584         tail_segment = list_last_entry(&tail_desc->segments,
1585                                        struct xilinx_axidma_tx_segment, node);
1586
1587         reg = dma_ctrl_read(chan, XILINX_MCDMA_CHAN_CR_OFFSET(chan->tdest));
1588
1589         if (chan->desc_pendingcount <= XILINX_MCDMA_COALESCE_MAX) {
1590                 reg &= ~XILINX_MCDMA_COALESCE_MASK;
1591                 reg |= chan->desc_pendingcount <<
1592                         XILINX_MCDMA_COALESCE_SHIFT;
1593         }
1594
1595         reg |= XILINX_MCDMA_IRQ_ALL_MASK;
1596         dma_ctrl_write(chan, XILINX_MCDMA_CHAN_CR_OFFSET(chan->tdest), reg);
1597
1598         /* Program current descriptor */
1599         xilinx_write(chan, XILINX_MCDMA_CHAN_CDESC_OFFSET(chan->tdest),
1600                      head_desc->async_tx.phys);
1601
1602         /* Program channel enable register */
1603         reg = dma_ctrl_read(chan, XILINX_MCDMA_CHEN_OFFSET);
1604         reg |= BIT(chan->tdest);
1605         dma_ctrl_write(chan, XILINX_MCDMA_CHEN_OFFSET, reg);
1606
1607         /* Start the fetch of BDs for the channel */
1608         reg = dma_ctrl_read(chan, XILINX_MCDMA_CHAN_CR_OFFSET(chan->tdest));
1609         reg |= XILINX_MCDMA_CR_RUNSTOP_MASK;
1610         dma_ctrl_write(chan, XILINX_MCDMA_CHAN_CR_OFFSET(chan->tdest), reg);
1611
1612         xilinx_dma_start(chan);
1613
1614         if (chan->err)
1615                 return;
1616
1617         /* Start the transfer */
1618         xilinx_write(chan, XILINX_MCDMA_CHAN_TDESC_OFFSET(chan->tdest),
1619                      tail_segment->phys);
1620
1621         list_splice_tail_init(&chan->pending_list, &chan->active_list);
1622         chan->desc_pendingcount = 0;
1623         chan->idle = false;
1624 }
1625
1626 /**
1627  * xilinx_dma_issue_pending - Issue pending transactions
1628  * @dchan: DMA channel
1629  */
1630 static void xilinx_dma_issue_pending(struct dma_chan *dchan)
1631 {
1632         struct xilinx_dma_chan *chan = to_xilinx_chan(dchan);
1633         unsigned long flags;
1634
1635         spin_lock_irqsave(&chan->lock, flags);
1636         chan->start_transfer(chan);
1637         spin_unlock_irqrestore(&chan->lock, flags);
1638 }
1639
1640 /**
1641  * xilinx_dma_complete_descriptor - Mark the active descriptor as complete
1642  * @chan : xilinx DMA channel
1643  *
1644  * CONTEXT: hardirq
1645  */
1646 static void xilinx_dma_complete_descriptor(struct xilinx_dma_chan *chan)
1647 {
1648         struct xilinx_dma_tx_descriptor *desc, *next;
1649
1650         /* This function was invoked with lock held */
1651         if (list_empty(&chan->active_list))
1652                 return;
1653
1654         list_for_each_entry_safe(desc, next, &chan->active_list, node) {
1655                 if (chan->has_sg && chan->xdev->dma_config->dmatype !=
1656                     XDMA_TYPE_VDMA)
1657                         desc->residue = xilinx_dma_get_residue(chan, desc);
1658                 else
1659                         desc->residue = 0;
1660                 desc->err = chan->err;
1661
1662                 list_del(&desc->node);
1663                 if (!desc->cyclic)
1664                         dma_cookie_complete(&desc->async_tx);
1665                 list_add_tail(&desc->node, &chan->done_list);
1666         }
1667 }
1668
1669 /**
1670  * xilinx_dma_reset - Reset DMA channel
1671  * @chan: Driver specific DMA channel
1672  *
1673  * Return: '0' on success and failure value on error
1674  */
1675 static int xilinx_dma_reset(struct xilinx_dma_chan *chan)
1676 {
1677         int err;
1678         u32 tmp;
1679
1680         dma_ctrl_set(chan, XILINX_DMA_REG_DMACR, XILINX_DMA_DMACR_RESET);
1681
1682         /* Wait for the hardware to finish reset */
1683         err = xilinx_dma_poll_timeout(chan, XILINX_DMA_REG_DMACR, tmp,
1684                                       !(tmp & XILINX_DMA_DMACR_RESET), 0,
1685                                       XILINX_DMA_LOOP_COUNT);
1686
1687         if (err) {
1688                 dev_err(chan->dev, "reset timeout, cr %x, sr %x\n",
1689                         dma_ctrl_read(chan, XILINX_DMA_REG_DMACR),
1690                         dma_ctrl_read(chan, XILINX_DMA_REG_DMASR));
1691                 return -ETIMEDOUT;
1692         }
1693
1694         chan->err = false;
1695         chan->idle = true;
1696         chan->desc_pendingcount = 0;
1697         chan->desc_submitcount = 0;
1698
1699         return err;
1700 }
1701
1702 /**
1703  * xilinx_dma_chan_reset - Reset DMA channel and enable interrupts
1704  * @chan: Driver specific DMA channel
1705  *
1706  * Return: '0' on success and failure value on error
1707  */
1708 static int xilinx_dma_chan_reset(struct xilinx_dma_chan *chan)
1709 {
1710         int err;
1711
1712         /* Reset VDMA */
1713         err = xilinx_dma_reset(chan);
1714         if (err)
1715                 return err;
1716
1717         /* Enable interrupts */
1718         dma_ctrl_set(chan, XILINX_DMA_REG_DMACR,
1719                       XILINX_DMA_DMAXR_ALL_IRQ_MASK);
1720
1721         return 0;
1722 }
1723
1724 /**
1725  * xilinx_mcdma_irq_handler - MCDMA Interrupt handler
1726  * @irq: IRQ number
1727  * @data: Pointer to the Xilinx MCDMA channel structure
1728  *
1729  * Return: IRQ_HANDLED/IRQ_NONE
1730  */
1731 static irqreturn_t xilinx_mcdma_irq_handler(int irq, void *data)
1732 {
1733         struct xilinx_dma_chan *chan = data;
1734         u32 status, ser_offset, chan_sermask, chan_offset = 0, chan_id;
1735
1736         if (chan->direction == DMA_DEV_TO_MEM)
1737                 ser_offset = XILINX_MCDMA_RXINT_SER_OFFSET;
1738         else
1739                 ser_offset = XILINX_MCDMA_TXINT_SER_OFFSET;
1740
1741         /* Read the channel id raising the interrupt*/
1742         chan_sermask = dma_ctrl_read(chan, ser_offset);
1743         chan_id = ffs(chan_sermask);
1744
1745         if (!chan_id)
1746                 return IRQ_NONE;
1747
1748         if (chan->direction == DMA_DEV_TO_MEM)
1749                 chan_offset = chan->xdev->dma_config->max_channels / 2;
1750
1751         chan_offset = chan_offset + (chan_id - 1);
1752         chan = chan->xdev->chan[chan_offset];
1753         /* Read the status and ack the interrupts. */
1754         status = dma_ctrl_read(chan, XILINX_MCDMA_CHAN_SR_OFFSET(chan->tdest));
1755         if (!(status & XILINX_MCDMA_IRQ_ALL_MASK))
1756                 return IRQ_NONE;
1757
1758         dma_ctrl_write(chan, XILINX_MCDMA_CHAN_SR_OFFSET(chan->tdest),
1759                        status & XILINX_MCDMA_IRQ_ALL_MASK);
1760
1761         if (status & XILINX_MCDMA_IRQ_ERR_MASK) {
1762                 dev_err(chan->dev, "Channel %p has errors %x cdr %x tdr %x\n",
1763                         chan,
1764                         dma_ctrl_read(chan, XILINX_MCDMA_CH_ERR_OFFSET),
1765                         dma_ctrl_read(chan, XILINX_MCDMA_CHAN_CDESC_OFFSET
1766                                       (chan->tdest)),
1767                         dma_ctrl_read(chan, XILINX_MCDMA_CHAN_TDESC_OFFSET
1768                                       (chan->tdest)));
1769                 chan->err = true;
1770         }
1771
1772         if (status & XILINX_MCDMA_IRQ_DELAY_MASK) {
1773                 /*
1774                  * Device takes too long to do the transfer when user requires
1775                  * responsiveness.
1776                  */
1777                 dev_dbg(chan->dev, "Inter-packet latency too long\n");
1778         }
1779
1780         if (status & XILINX_MCDMA_IRQ_IOC_MASK) {
1781                 spin_lock(&chan->lock);
1782                 xilinx_dma_complete_descriptor(chan);
1783                 chan->idle = true;
1784                 chan->start_transfer(chan);
1785                 spin_unlock(&chan->lock);
1786         }
1787
1788         tasklet_schedule(&chan->tasklet);
1789         return IRQ_HANDLED;
1790 }
1791
1792 /**
1793  * xilinx_dma_irq_handler - DMA Interrupt handler
1794  * @irq: IRQ number
1795  * @data: Pointer to the Xilinx DMA channel structure
1796  *
1797  * Return: IRQ_HANDLED/IRQ_NONE
1798  */
1799 static irqreturn_t xilinx_dma_irq_handler(int irq, void *data)
1800 {
1801         struct xilinx_dma_chan *chan = data;
1802         u32 status;
1803
1804         /* Read the status and ack the interrupts. */
1805         status = dma_ctrl_read(chan, XILINX_DMA_REG_DMASR);
1806         if (!(status & XILINX_DMA_DMAXR_ALL_IRQ_MASK))
1807                 return IRQ_NONE;
1808
1809         dma_ctrl_write(chan, XILINX_DMA_REG_DMASR,
1810                         status & XILINX_DMA_DMAXR_ALL_IRQ_MASK);
1811
1812         if (status & XILINX_DMA_DMASR_ERR_IRQ) {
1813                 /*
1814                  * An error occurred. If C_FLUSH_ON_FSYNC is enabled and the
1815                  * error is recoverable, ignore it. Otherwise flag the error.
1816                  *
1817                  * Only recoverable errors can be cleared in the DMASR register,
1818                  * make sure not to write to other error bits to 1.
1819                  */
1820                 u32 errors = status & XILINX_DMA_DMASR_ALL_ERR_MASK;
1821
1822                 dma_ctrl_write(chan, XILINX_DMA_REG_DMASR,
1823                                 errors & XILINX_DMA_DMASR_ERR_RECOVER_MASK);
1824
1825                 if (!chan->flush_on_fsync ||
1826                     (errors & ~XILINX_DMA_DMASR_ERR_RECOVER_MASK)) {
1827                         dev_err(chan->dev,
1828                                 "Channel %p has errors %x, cdr %x tdr %x\n",
1829                                 chan, errors,
1830                                 dma_ctrl_read(chan, XILINX_DMA_REG_CURDESC),
1831                                 dma_ctrl_read(chan, XILINX_DMA_REG_TAILDESC));
1832                         chan->err = true;
1833                 }
1834         }
1835
1836         if (status & XILINX_DMA_DMASR_DLY_CNT_IRQ) {
1837                 /*
1838                  * Device takes too long to do the transfer when user requires
1839                  * responsiveness.
1840                  */
1841                 dev_dbg(chan->dev, "Inter-packet latency too long\n");
1842         }
1843
1844         if (status & XILINX_DMA_DMASR_FRM_CNT_IRQ) {
1845                 spin_lock(&chan->lock);
1846                 xilinx_dma_complete_descriptor(chan);
1847                 chan->idle = true;
1848                 chan->start_transfer(chan);
1849                 spin_unlock(&chan->lock);
1850         }
1851
1852         tasklet_schedule(&chan->tasklet);
1853         return IRQ_HANDLED;
1854 }
1855
1856 /**
1857  * append_desc_queue - Queuing descriptor
1858  * @chan: Driver specific dma channel
1859  * @desc: dma transaction descriptor
1860  */
1861 static void append_desc_queue(struct xilinx_dma_chan *chan,
1862                               struct xilinx_dma_tx_descriptor *desc)
1863 {
1864         struct xilinx_vdma_tx_segment *tail_segment;
1865         struct xilinx_dma_tx_descriptor *tail_desc;
1866         struct xilinx_axidma_tx_segment *axidma_tail_segment;
1867         struct xilinx_cdma_tx_segment *cdma_tail_segment;
1868
1869         if (list_empty(&chan->pending_list))
1870                 goto append;
1871
1872         /*
1873          * Add the hardware descriptor to the chain of hardware descriptors
1874          * that already exists in memory.
1875          */
1876         tail_desc = list_last_entry(&chan->pending_list,
1877                                     struct xilinx_dma_tx_descriptor, node);
1878         if (chan->xdev->dma_config->dmatype == XDMA_TYPE_VDMA) {
1879                 tail_segment = list_last_entry(&tail_desc->segments,
1880                                                struct xilinx_vdma_tx_segment,
1881                                                node);
1882                 tail_segment->hw.next_desc = (u32)desc->async_tx.phys;
1883         } else if (chan->xdev->dma_config->dmatype == XDMA_TYPE_CDMA) {
1884                 cdma_tail_segment = list_last_entry(&tail_desc->segments,
1885                                                 struct xilinx_cdma_tx_segment,
1886                                                 node);
1887                 cdma_tail_segment->hw.next_desc = (u32)desc->async_tx.phys;
1888         } else {
1889                 axidma_tail_segment = list_last_entry(&tail_desc->segments,
1890                                                struct xilinx_axidma_tx_segment,
1891                                                node);
1892                 axidma_tail_segment->hw.next_desc = (u32)desc->async_tx.phys;
1893         }
1894
1895         /*
1896          * Add the software descriptor and all children to the list
1897          * of pending transactions
1898          */
1899 append:
1900         list_add_tail(&desc->node, &chan->pending_list);
1901         chan->desc_pendingcount++;
1902
1903         if (chan->has_sg && (chan->xdev->dma_config->dmatype == XDMA_TYPE_VDMA)
1904             && unlikely(chan->desc_pendingcount > chan->num_frms)) {
1905                 dev_dbg(chan->dev, "desc pendingcount is too high\n");
1906                 chan->desc_pendingcount = chan->num_frms;
1907         }
1908 }
1909
1910 /**
1911  * xilinx_dma_tx_submit - Submit DMA transaction
1912  * @tx: Async transaction descriptor
1913  *
1914  * Return: cookie value on success and failure value on error
1915  */
1916 static dma_cookie_t xilinx_dma_tx_submit(struct dma_async_tx_descriptor *tx)
1917 {
1918         struct xilinx_dma_tx_descriptor *desc = to_dma_tx_descriptor(tx);
1919         struct xilinx_dma_chan *chan = to_xilinx_chan(tx->chan);
1920         dma_cookie_t cookie;
1921         unsigned long flags;
1922         int err;
1923
1924         if (chan->cyclic) {
1925                 xilinx_dma_free_tx_descriptor(chan, desc);
1926                 return -EBUSY;
1927         }
1928
1929         if (chan->err) {
1930                 /*
1931                  * If reset fails, need to hard reset the system.
1932                  * Channel is no longer functional
1933                  */
1934                 err = xilinx_dma_chan_reset(chan);
1935                 if (err < 0)
1936                         return err;
1937         }
1938
1939         spin_lock_irqsave(&chan->lock, flags);
1940
1941         cookie = dma_cookie_assign(tx);
1942
1943         /* Put this transaction onto the tail of the pending queue */
1944         append_desc_queue(chan, desc);
1945
1946         if (desc->cyclic)
1947                 chan->cyclic = true;
1948
1949         spin_unlock_irqrestore(&chan->lock, flags);
1950
1951         return cookie;
1952 }
1953
1954 /**
1955  * xilinx_vdma_dma_prep_interleaved - prepare a descriptor for a
1956  *      DMA_SLAVE transaction
1957  * @dchan: DMA channel
1958  * @xt: Interleaved template pointer
1959  * @flags: transfer ack flags
1960  *
1961  * Return: Async transaction descriptor on success and NULL on failure
1962  */
1963 static struct dma_async_tx_descriptor *
1964 xilinx_vdma_dma_prep_interleaved(struct dma_chan *dchan,
1965                                  struct dma_interleaved_template *xt,
1966                                  unsigned long flags)
1967 {
1968         struct xilinx_dma_chan *chan = to_xilinx_chan(dchan);
1969         struct xilinx_dma_tx_descriptor *desc;
1970         struct xilinx_vdma_tx_segment *segment;
1971         struct xilinx_vdma_desc_hw *hw;
1972
1973         if (!is_slave_direction(xt->dir))
1974                 return NULL;
1975
1976         if (!xt->numf || !xt->sgl[0].size)
1977                 return NULL;
1978
1979         if (xt->frame_size != 1)
1980                 return NULL;
1981
1982         /* Allocate a transaction descriptor. */
1983         desc = xilinx_dma_alloc_tx_descriptor(chan);
1984         if (!desc)
1985                 return NULL;
1986
1987         dma_async_tx_descriptor_init(&desc->async_tx, &chan->common);
1988         desc->async_tx.tx_submit = xilinx_dma_tx_submit;
1989         async_tx_ack(&desc->async_tx);
1990
1991         /* Allocate the link descriptor from DMA pool */
1992         segment = xilinx_vdma_alloc_tx_segment(chan);
1993         if (!segment)
1994                 goto error;
1995
1996         /* Fill in the hardware descriptor */
1997         hw = &segment->hw;
1998         hw->vsize = xt->numf;
1999         hw->hsize = xt->sgl[0].size;
2000         hw->stride = (xt->sgl[0].icg + xt->sgl[0].size) <<
2001                         XILINX_DMA_FRMDLY_STRIDE_STRIDE_SHIFT;
2002         hw->stride |= chan->config.frm_dly <<
2003                         XILINX_DMA_FRMDLY_STRIDE_FRMDLY_SHIFT;
2004
2005         if (xt->dir != DMA_MEM_TO_DEV) {
2006                 if (chan->ext_addr) {
2007                         hw->buf_addr = lower_32_bits(xt->dst_start);
2008                         hw->buf_addr_msb = upper_32_bits(xt->dst_start);
2009                 } else {
2010                         hw->buf_addr = xt->dst_start;
2011                 }
2012         } else {
2013                 if (chan->ext_addr) {
2014                         hw->buf_addr = lower_32_bits(xt->src_start);
2015                         hw->buf_addr_msb = upper_32_bits(xt->src_start);
2016                 } else {
2017                         hw->buf_addr = xt->src_start;
2018                 }
2019         }
2020
2021         /* Insert the segment into the descriptor segments list. */
2022         list_add_tail(&segment->node, &desc->segments);
2023
2024         /* Link the last hardware descriptor with the first. */
2025         segment = list_first_entry(&desc->segments,
2026                                    struct xilinx_vdma_tx_segment, node);
2027         desc->async_tx.phys = segment->phys;
2028
2029         return &desc->async_tx;
2030
2031 error:
2032         xilinx_dma_free_tx_descriptor(chan, desc);
2033         return NULL;
2034 }
2035
2036 /**
2037  * xilinx_cdma_prep_memcpy - prepare descriptors for a memcpy transaction
2038  * @dchan: DMA channel
2039  * @dma_dst: destination address
2040  * @dma_src: source address
2041  * @len: transfer length
2042  * @flags: transfer ack flags
2043  *
2044  * Return: Async transaction descriptor on success and NULL on failure
2045  */
2046 static struct dma_async_tx_descriptor *
2047 xilinx_cdma_prep_memcpy(struct dma_chan *dchan, dma_addr_t dma_dst,
2048                         dma_addr_t dma_src, size_t len, unsigned long flags)
2049 {
2050         struct xilinx_dma_chan *chan = to_xilinx_chan(dchan);
2051         struct xilinx_dma_tx_descriptor *desc;
2052         struct xilinx_cdma_tx_segment *segment;
2053         struct xilinx_cdma_desc_hw *hw;
2054
2055         if (!len || len > chan->xdev->max_buffer_len)
2056                 return NULL;
2057
2058         desc = xilinx_dma_alloc_tx_descriptor(chan);
2059         if (!desc)
2060                 return NULL;
2061
2062         dma_async_tx_descriptor_init(&desc->async_tx, &chan->common);
2063         desc->async_tx.tx_submit = xilinx_dma_tx_submit;
2064
2065         /* Allocate the link descriptor from DMA pool */
2066         segment = xilinx_cdma_alloc_tx_segment(chan);
2067         if (!segment)
2068                 goto error;
2069
2070         hw = &segment->hw;
2071         hw->control = len;
2072         hw->src_addr = dma_src;
2073         hw->dest_addr = dma_dst;
2074         if (chan->ext_addr) {
2075                 hw->src_addr_msb = upper_32_bits(dma_src);
2076                 hw->dest_addr_msb = upper_32_bits(dma_dst);
2077         }
2078
2079         /* Insert the segment into the descriptor segments list. */
2080         list_add_tail(&segment->node, &desc->segments);
2081
2082         desc->async_tx.phys = segment->phys;
2083         hw->next_desc = segment->phys;
2084
2085         return &desc->async_tx;
2086
2087 error:
2088         xilinx_dma_free_tx_descriptor(chan, desc);
2089         return NULL;
2090 }
2091
2092 /**
2093  * xilinx_dma_prep_slave_sg - prepare descriptors for a DMA_SLAVE transaction
2094  * @dchan: DMA channel
2095  * @sgl: scatterlist to transfer to/from
2096  * @sg_len: number of entries in @scatterlist
2097  * @direction: DMA direction
2098  * @flags: transfer ack flags
2099  * @context: APP words of the descriptor
2100  *
2101  * Return: Async transaction descriptor on success and NULL on failure
2102  */
2103 static struct dma_async_tx_descriptor *xilinx_dma_prep_slave_sg(
2104         struct dma_chan *dchan, struct scatterlist *sgl, unsigned int sg_len,
2105         enum dma_transfer_direction direction, unsigned long flags,
2106         void *context)
2107 {
2108         struct xilinx_dma_chan *chan = to_xilinx_chan(dchan);
2109         struct xilinx_dma_tx_descriptor *desc;
2110         struct xilinx_axidma_tx_segment *segment = NULL;
2111         u32 *app_w = (u32 *)context;
2112         struct scatterlist *sg;
2113         size_t copy;
2114         size_t sg_used;
2115         unsigned int i;
2116
2117         if (!is_slave_direction(direction))
2118                 return NULL;
2119
2120         /* Allocate a transaction descriptor. */
2121         desc = xilinx_dma_alloc_tx_descriptor(chan);
2122         if (!desc)
2123                 return NULL;
2124
2125         dma_async_tx_descriptor_init(&desc->async_tx, &chan->common);
2126         desc->async_tx.tx_submit = xilinx_dma_tx_submit;
2127
2128         /* Build transactions using information in the scatter gather list */
2129         for_each_sg(sgl, sg, sg_len, i) {
2130                 sg_used = 0;
2131
2132                 /* Loop until the entire scatterlist entry is used */
2133                 while (sg_used < sg_dma_len(sg)) {
2134                         struct xilinx_axidma_desc_hw *hw;
2135
2136                         /* Get a free segment */
2137                         segment = xilinx_axidma_alloc_tx_segment(chan);
2138                         if (!segment)
2139                                 goto error;
2140
2141                         /*
2142                          * Calculate the maximum number of bytes to transfer,
2143                          * making sure it is less than the hw limit
2144                          */
2145                         copy = xilinx_dma_calc_copysize(chan, sg_dma_len(sg),
2146                                                         sg_used);
2147                         hw = &segment->hw;
2148
2149                         /* Fill in the descriptor */
2150                         xilinx_axidma_buf(chan, hw, sg_dma_address(sg),
2151                                           sg_used, 0);
2152
2153                         hw->control = copy;
2154
2155                         if (chan->direction == DMA_MEM_TO_DEV) {
2156                                 if (app_w)
2157                                         memcpy(hw->app, app_w, sizeof(u32) *
2158                                                XILINX_DMA_NUM_APP_WORDS);
2159                         }
2160
2161                         sg_used += copy;
2162
2163                         /*
2164                          * Insert the segment into the descriptor segments
2165                          * list.
2166                          */
2167                         list_add_tail(&segment->node, &desc->segments);
2168                 }
2169         }
2170
2171         segment = list_first_entry(&desc->segments,
2172                                    struct xilinx_axidma_tx_segment, node);
2173         desc->async_tx.phys = segment->phys;
2174
2175         /* For the last DMA_MEM_TO_DEV transfer, set EOP */
2176         if (chan->direction == DMA_MEM_TO_DEV) {
2177                 segment->hw.control |= XILINX_DMA_BD_SOP;
2178                 segment = list_last_entry(&desc->segments,
2179                                           struct xilinx_axidma_tx_segment,
2180                                           node);
2181                 segment->hw.control |= XILINX_DMA_BD_EOP;
2182         }
2183
2184         return &desc->async_tx;
2185
2186 error:
2187         xilinx_dma_free_tx_descriptor(chan, desc);
2188         return NULL;
2189 }
2190
2191 /**
2192  * xilinx_dma_prep_dma_cyclic - prepare descriptors for a DMA_SLAVE transaction
2193  * @dchan: DMA channel
2194  * @buf_addr: Physical address of the buffer
2195  * @buf_len: Total length of the cyclic buffers
2196  * @period_len: length of individual cyclic buffer
2197  * @direction: DMA direction
2198  * @flags: transfer ack flags
2199  *
2200  * Return: Async transaction descriptor on success and NULL on failure
2201  */
2202 static struct dma_async_tx_descriptor *xilinx_dma_prep_dma_cyclic(
2203         struct dma_chan *dchan, dma_addr_t buf_addr, size_t buf_len,
2204         size_t period_len, enum dma_transfer_direction direction,
2205         unsigned long flags)
2206 {
2207         struct xilinx_dma_chan *chan = to_xilinx_chan(dchan);
2208         struct xilinx_dma_tx_descriptor *desc;
2209         struct xilinx_axidma_tx_segment *segment, *head_segment, *prev = NULL;
2210         size_t copy, sg_used;
2211         unsigned int num_periods;
2212         int i;
2213         u32 reg;
2214
2215         if (!period_len)
2216                 return NULL;
2217
2218         num_periods = buf_len / period_len;
2219
2220         if (!num_periods)
2221                 return NULL;
2222
2223         if (!is_slave_direction(direction))
2224                 return NULL;
2225
2226         /* Allocate a transaction descriptor. */
2227         desc = xilinx_dma_alloc_tx_descriptor(chan);
2228         if (!desc)
2229                 return NULL;
2230
2231         chan->direction = direction;
2232         dma_async_tx_descriptor_init(&desc->async_tx, &chan->common);
2233         desc->async_tx.tx_submit = xilinx_dma_tx_submit;
2234
2235         for (i = 0; i < num_periods; ++i) {
2236                 sg_used = 0;
2237
2238                 while (sg_used < period_len) {
2239                         struct xilinx_axidma_desc_hw *hw;
2240
2241                         /* Get a free segment */
2242                         segment = xilinx_axidma_alloc_tx_segment(chan);
2243                         if (!segment)
2244                                 goto error;
2245
2246                         /*
2247                          * Calculate the maximum number of bytes to transfer,
2248                          * making sure it is less than the hw limit
2249                          */
2250                         copy = xilinx_dma_calc_copysize(chan, period_len,
2251                                                         sg_used);
2252                         hw = &segment->hw;
2253                         xilinx_axidma_buf(chan, hw, buf_addr, sg_used,
2254                                           period_len * i);
2255                         hw->control = copy;
2256
2257                         if (prev)
2258                                 prev->hw.next_desc = segment->phys;
2259
2260                         prev = segment;
2261                         sg_used += copy;
2262
2263                         /*
2264                          * Insert the segment into the descriptor segments
2265                          * list.
2266                          */
2267                         list_add_tail(&segment->node, &desc->segments);
2268                 }
2269         }
2270
2271         head_segment = list_first_entry(&desc->segments,
2272                                    struct xilinx_axidma_tx_segment, node);
2273         desc->async_tx.phys = head_segment->phys;
2274
2275         desc->cyclic = true;
2276         reg = dma_ctrl_read(chan, XILINX_DMA_REG_DMACR);
2277         reg |= XILINX_DMA_CR_CYCLIC_BD_EN_MASK;
2278         dma_ctrl_write(chan, XILINX_DMA_REG_DMACR, reg);
2279
2280         segment = list_last_entry(&desc->segments,
2281                                   struct xilinx_axidma_tx_segment,
2282                                   node);
2283         segment->hw.next_desc = (u32) head_segment->phys;
2284
2285         /* For the last DMA_MEM_TO_DEV transfer, set EOP */
2286         if (direction == DMA_MEM_TO_DEV) {
2287                 head_segment->hw.control |= XILINX_DMA_BD_SOP;
2288                 segment->hw.control |= XILINX_DMA_BD_EOP;
2289         }
2290
2291         return &desc->async_tx;
2292
2293 error:
2294         xilinx_dma_free_tx_descriptor(chan, desc);
2295         return NULL;
2296 }
2297
2298 /**
2299  * xilinx_mcdma_prep_slave_sg - prepare descriptors for a DMA_SLAVE transaction
2300  * @dchan: DMA channel
2301  * @sgl: scatterlist to transfer to/from
2302  * @sg_len: number of entries in @scatterlist
2303  * @direction: DMA direction
2304  * @flags: transfer ack flags
2305  * @context: APP words of the descriptor
2306  *
2307  * Return: Async transaction descriptor on success and NULL on failure
2308  */
2309 static struct dma_async_tx_descriptor *
2310 xilinx_mcdma_prep_slave_sg(struct dma_chan *dchan, struct scatterlist *sgl,
2311                            unsigned int sg_len,
2312                            enum dma_transfer_direction direction,
2313                            unsigned long flags, void *context)
2314 {
2315         struct xilinx_dma_chan *chan = to_xilinx_chan(dchan);
2316         struct xilinx_dma_tx_descriptor *desc;
2317         struct xilinx_aximcdma_tx_segment *segment = NULL;
2318         u32 *app_w = (u32 *)context;
2319         struct scatterlist *sg;
2320         size_t copy;
2321         size_t sg_used;
2322         unsigned int i;
2323
2324         if (!is_slave_direction(direction))
2325                 return NULL;
2326
2327         /* Allocate a transaction descriptor. */
2328         desc = xilinx_dma_alloc_tx_descriptor(chan);
2329         if (!desc)
2330                 return NULL;
2331
2332         dma_async_tx_descriptor_init(&desc->async_tx, &chan->common);
2333         desc->async_tx.tx_submit = xilinx_dma_tx_submit;
2334
2335         /* Build transactions using information in the scatter gather list */
2336         for_each_sg(sgl, sg, sg_len, i) {
2337                 sg_used = 0;
2338
2339                 /* Loop until the entire scatterlist entry is used */
2340                 while (sg_used < sg_dma_len(sg)) {
2341                         struct xilinx_aximcdma_desc_hw *hw;
2342
2343                         /* Get a free segment */
2344                         segment = xilinx_aximcdma_alloc_tx_segment(chan);
2345                         if (!segment)
2346                                 goto error;
2347
2348                         /*
2349                          * Calculate the maximum number of bytes to transfer,
2350                          * making sure it is less than the hw limit
2351                          */
2352                         copy = min_t(size_t, sg_dma_len(sg) - sg_used,
2353                                      chan->xdev->max_buffer_len);
2354                         hw = &segment->hw;
2355
2356                         /* Fill in the descriptor */
2357                         xilinx_aximcdma_buf(chan, hw, sg_dma_address(sg),
2358                                             sg_used);
2359                         hw->control = copy;
2360
2361                         if (chan->direction == DMA_MEM_TO_DEV && app_w) {
2362                                 memcpy(hw->app, app_w, sizeof(u32) *
2363                                        XILINX_DMA_NUM_APP_WORDS);
2364                         }
2365
2366                         sg_used += copy;
2367                         /*
2368                          * Insert the segment into the descriptor segments
2369                          * list.
2370                          */
2371                         list_add_tail(&segment->node, &desc->segments);
2372                 }
2373         }
2374
2375         segment = list_first_entry(&desc->segments,
2376                                    struct xilinx_aximcdma_tx_segment, node);
2377         desc->async_tx.phys = segment->phys;
2378
2379         /* For the last DMA_MEM_TO_DEV transfer, set EOP */
2380         if (chan->direction == DMA_MEM_TO_DEV) {
2381                 segment->hw.control |= XILINX_MCDMA_BD_SOP;
2382                 segment = list_last_entry(&desc->segments,
2383                                           struct xilinx_aximcdma_tx_segment,
2384                                           node);
2385                 segment->hw.control |= XILINX_MCDMA_BD_EOP;
2386         }
2387
2388         return &desc->async_tx;
2389
2390 error:
2391         xilinx_dma_free_tx_descriptor(chan, desc);
2392
2393         return NULL;
2394 }
2395
2396 /**
2397  * xilinx_dma_terminate_all - Halt the channel and free descriptors
2398  * @dchan: Driver specific DMA Channel pointer
2399  *
2400  * Return: '0' always.
2401  */
2402 static int xilinx_dma_terminate_all(struct dma_chan *dchan)
2403 {
2404         struct xilinx_dma_chan *chan = to_xilinx_chan(dchan);
2405         u32 reg;
2406         int err;
2407
2408         if (!chan->cyclic) {
2409                 err = chan->stop_transfer(chan);
2410                 if (err) {
2411                         dev_err(chan->dev, "Cannot stop channel %p: %x\n",
2412                                 chan, dma_ctrl_read(chan,
2413                                 XILINX_DMA_REG_DMASR));
2414                         chan->err = true;
2415                 }
2416         }
2417
2418         xilinx_dma_chan_reset(chan);
2419         /* Remove and free all of the descriptors in the lists */
2420         xilinx_dma_free_descriptors(chan);
2421         chan->idle = true;
2422
2423         if (chan->cyclic) {
2424                 reg = dma_ctrl_read(chan, XILINX_DMA_REG_DMACR);
2425                 reg &= ~XILINX_DMA_CR_CYCLIC_BD_EN_MASK;
2426                 dma_ctrl_write(chan, XILINX_DMA_REG_DMACR, reg);
2427                 chan->cyclic = false;
2428         }
2429
2430         if ((chan->xdev->dma_config->dmatype == XDMA_TYPE_CDMA) && chan->has_sg)
2431                 dma_ctrl_clr(chan, XILINX_DMA_REG_DMACR,
2432                              XILINX_CDMA_CR_SGMODE);
2433
2434         return 0;
2435 }
2436
2437 /**
2438  * xilinx_dma_channel_set_config - Configure VDMA channel
2439  * Run-time configuration for Axi VDMA, supports:
2440  * . halt the channel
2441  * . configure interrupt coalescing and inter-packet delay threshold
2442  * . start/stop parking
2443  * . enable genlock
2444  *
2445  * @dchan: DMA channel
2446  * @cfg: VDMA device configuration pointer
2447  *
2448  * Return: '0' on success and failure value on error
2449  */
2450 int xilinx_vdma_channel_set_config(struct dma_chan *dchan,
2451                                         struct xilinx_vdma_config *cfg)
2452 {
2453         struct xilinx_dma_chan *chan = to_xilinx_chan(dchan);
2454         u32 dmacr;
2455
2456         if (cfg->reset)
2457                 return xilinx_dma_chan_reset(chan);
2458
2459         dmacr = dma_ctrl_read(chan, XILINX_DMA_REG_DMACR);
2460
2461         chan->config.frm_dly = cfg->frm_dly;
2462         chan->config.park = cfg->park;
2463
2464         /* genlock settings */
2465         chan->config.gen_lock = cfg->gen_lock;
2466         chan->config.master = cfg->master;
2467
2468         dmacr &= ~XILINX_DMA_DMACR_GENLOCK_EN;
2469         if (cfg->gen_lock && chan->genlock) {
2470                 dmacr |= XILINX_DMA_DMACR_GENLOCK_EN;
2471                 dmacr &= ~XILINX_DMA_DMACR_MASTER_MASK;
2472                 dmacr |= cfg->master << XILINX_DMA_DMACR_MASTER_SHIFT;
2473         }
2474
2475         chan->config.frm_cnt_en = cfg->frm_cnt_en;
2476         chan->config.vflip_en = cfg->vflip_en;
2477
2478         if (cfg->park)
2479                 chan->config.park_frm = cfg->park_frm;
2480         else
2481                 chan->config.park_frm = -1;
2482
2483         chan->config.coalesc = cfg->coalesc;
2484         chan->config.delay = cfg->delay;
2485
2486         if (cfg->coalesc <= XILINX_DMA_DMACR_FRAME_COUNT_MAX) {
2487                 dmacr &= ~XILINX_DMA_DMACR_FRAME_COUNT_MASK;
2488                 dmacr |= cfg->coalesc << XILINX_DMA_DMACR_FRAME_COUNT_SHIFT;
2489                 chan->config.coalesc = cfg->coalesc;
2490         }
2491
2492         if (cfg->delay <= XILINX_DMA_DMACR_DELAY_MAX) {
2493                 dmacr &= ~XILINX_DMA_DMACR_DELAY_MASK;
2494                 dmacr |= cfg->delay << XILINX_DMA_DMACR_DELAY_SHIFT;
2495                 chan->config.delay = cfg->delay;
2496         }
2497
2498         /* FSync Source selection */
2499         dmacr &= ~XILINX_DMA_DMACR_FSYNCSRC_MASK;
2500         dmacr |= cfg->ext_fsync << XILINX_DMA_DMACR_FSYNCSRC_SHIFT;
2501
2502         dma_ctrl_write(chan, XILINX_DMA_REG_DMACR, dmacr);
2503
2504         return 0;
2505 }
2506 EXPORT_SYMBOL(xilinx_vdma_channel_set_config);
2507
2508 /* -----------------------------------------------------------------------------
2509  * Probe and remove
2510  */
2511
2512 /**
2513  * xilinx_dma_chan_remove - Per Channel remove function
2514  * @chan: Driver specific DMA channel
2515  */
2516 static void xilinx_dma_chan_remove(struct xilinx_dma_chan *chan)
2517 {
2518         /* Disable all interrupts */
2519         dma_ctrl_clr(chan, XILINX_DMA_REG_DMACR,
2520                       XILINX_DMA_DMAXR_ALL_IRQ_MASK);
2521
2522         if (chan->irq > 0)
2523                 free_irq(chan->irq, chan);
2524
2525         tasklet_kill(&chan->tasklet);
2526
2527         list_del(&chan->common.device_node);
2528 }
2529
2530 static int axidma_clk_init(struct platform_device *pdev, struct clk **axi_clk,
2531                             struct clk **tx_clk, struct clk **rx_clk,
2532                             struct clk **sg_clk, struct clk **tmp_clk)
2533 {
2534         int err;
2535
2536         *tmp_clk = NULL;
2537
2538         *axi_clk = devm_clk_get(&pdev->dev, "s_axi_lite_aclk");
2539         if (IS_ERR(*axi_clk))
2540                 return dev_err_probe(&pdev->dev, PTR_ERR(*axi_clk), "failed to get axi_aclk\n");
2541
2542         *tx_clk = devm_clk_get(&pdev->dev, "m_axi_mm2s_aclk");
2543         if (IS_ERR(*tx_clk))
2544                 *tx_clk = NULL;
2545
2546         *rx_clk = devm_clk_get(&pdev->dev, "m_axi_s2mm_aclk");
2547         if (IS_ERR(*rx_clk))
2548                 *rx_clk = NULL;
2549
2550         *sg_clk = devm_clk_get(&pdev->dev, "m_axi_sg_aclk");
2551         if (IS_ERR(*sg_clk))
2552                 *sg_clk = NULL;
2553
2554         err = clk_prepare_enable(*axi_clk);
2555         if (err) {
2556                 dev_err(&pdev->dev, "failed to enable axi_clk (%d)\n", err);
2557                 return err;
2558         }
2559
2560         err = clk_prepare_enable(*tx_clk);
2561         if (err) {
2562                 dev_err(&pdev->dev, "failed to enable tx_clk (%d)\n", err);
2563                 goto err_disable_axiclk;
2564         }
2565
2566         err = clk_prepare_enable(*rx_clk);
2567         if (err) {
2568                 dev_err(&pdev->dev, "failed to enable rx_clk (%d)\n", err);
2569                 goto err_disable_txclk;
2570         }
2571
2572         err = clk_prepare_enable(*sg_clk);
2573         if (err) {
2574                 dev_err(&pdev->dev, "failed to enable sg_clk (%d)\n", err);
2575                 goto err_disable_rxclk;
2576         }
2577
2578         return 0;
2579
2580 err_disable_rxclk:
2581         clk_disable_unprepare(*rx_clk);
2582 err_disable_txclk:
2583         clk_disable_unprepare(*tx_clk);
2584 err_disable_axiclk:
2585         clk_disable_unprepare(*axi_clk);
2586
2587         return err;
2588 }
2589
2590 static int axicdma_clk_init(struct platform_device *pdev, struct clk **axi_clk,
2591                             struct clk **dev_clk, struct clk **tmp_clk,
2592                             struct clk **tmp1_clk, struct clk **tmp2_clk)
2593 {
2594         int err;
2595
2596         *tmp_clk = NULL;
2597         *tmp1_clk = NULL;
2598         *tmp2_clk = NULL;
2599
2600         *axi_clk = devm_clk_get(&pdev->dev, "s_axi_lite_aclk");
2601         if (IS_ERR(*axi_clk))
2602                 return dev_err_probe(&pdev->dev, PTR_ERR(*axi_clk), "failed to get axi_aclk\n");
2603
2604         *dev_clk = devm_clk_get(&pdev->dev, "m_axi_aclk");
2605         if (IS_ERR(*dev_clk))
2606                 return dev_err_probe(&pdev->dev, PTR_ERR(*dev_clk), "failed to get dev_clk\n");
2607
2608         err = clk_prepare_enable(*axi_clk);
2609         if (err) {
2610                 dev_err(&pdev->dev, "failed to enable axi_clk (%d)\n", err);
2611                 return err;
2612         }
2613
2614         err = clk_prepare_enable(*dev_clk);
2615         if (err) {
2616                 dev_err(&pdev->dev, "failed to enable dev_clk (%d)\n", err);
2617                 goto err_disable_axiclk;
2618         }
2619
2620         return 0;
2621
2622 err_disable_axiclk:
2623         clk_disable_unprepare(*axi_clk);
2624
2625         return err;
2626 }
2627
2628 static int axivdma_clk_init(struct platform_device *pdev, struct clk **axi_clk,
2629                             struct clk **tx_clk, struct clk **txs_clk,
2630                             struct clk **rx_clk, struct clk **rxs_clk)
2631 {
2632         int err;
2633
2634         *axi_clk = devm_clk_get(&pdev->dev, "s_axi_lite_aclk");
2635         if (IS_ERR(*axi_clk))
2636                 return dev_err_probe(&pdev->dev, PTR_ERR(*axi_clk), "failed to get axi_aclk\n");
2637
2638         *tx_clk = devm_clk_get(&pdev->dev, "m_axi_mm2s_aclk");
2639         if (IS_ERR(*tx_clk))
2640                 *tx_clk = NULL;
2641
2642         *txs_clk = devm_clk_get(&pdev->dev, "m_axis_mm2s_aclk");
2643         if (IS_ERR(*txs_clk))
2644                 *txs_clk = NULL;
2645
2646         *rx_clk = devm_clk_get(&pdev->dev, "m_axi_s2mm_aclk");
2647         if (IS_ERR(*rx_clk))
2648                 *rx_clk = NULL;
2649
2650         *rxs_clk = devm_clk_get(&pdev->dev, "s_axis_s2mm_aclk");
2651         if (IS_ERR(*rxs_clk))
2652                 *rxs_clk = NULL;
2653
2654         err = clk_prepare_enable(*axi_clk);
2655         if (err) {
2656                 dev_err(&pdev->dev, "failed to enable axi_clk (%d)\n",
2657                         err);
2658                 return err;
2659         }
2660
2661         err = clk_prepare_enable(*tx_clk);
2662         if (err) {
2663                 dev_err(&pdev->dev, "failed to enable tx_clk (%d)\n", err);
2664                 goto err_disable_axiclk;
2665         }
2666
2667         err = clk_prepare_enable(*txs_clk);
2668         if (err) {
2669                 dev_err(&pdev->dev, "failed to enable txs_clk (%d)\n", err);
2670                 goto err_disable_txclk;
2671         }
2672
2673         err = clk_prepare_enable(*rx_clk);
2674         if (err) {
2675                 dev_err(&pdev->dev, "failed to enable rx_clk (%d)\n", err);
2676                 goto err_disable_txsclk;
2677         }
2678
2679         err = clk_prepare_enable(*rxs_clk);
2680         if (err) {
2681                 dev_err(&pdev->dev, "failed to enable rxs_clk (%d)\n", err);
2682                 goto err_disable_rxclk;
2683         }
2684
2685         return 0;
2686
2687 err_disable_rxclk:
2688         clk_disable_unprepare(*rx_clk);
2689 err_disable_txsclk:
2690         clk_disable_unprepare(*txs_clk);
2691 err_disable_txclk:
2692         clk_disable_unprepare(*tx_clk);
2693 err_disable_axiclk:
2694         clk_disable_unprepare(*axi_clk);
2695
2696         return err;
2697 }
2698
2699 static void xdma_disable_allclks(struct xilinx_dma_device *xdev)
2700 {
2701         clk_disable_unprepare(xdev->rxs_clk);
2702         clk_disable_unprepare(xdev->rx_clk);
2703         clk_disable_unprepare(xdev->txs_clk);
2704         clk_disable_unprepare(xdev->tx_clk);
2705         clk_disable_unprepare(xdev->axi_clk);
2706 }
2707
2708 /**
2709  * xilinx_dma_chan_probe - Per Channel Probing
2710  * It get channel features from the device tree entry and
2711  * initialize special channel handling routines
2712  *
2713  * @xdev: Driver specific device structure
2714  * @node: Device node
2715  *
2716  * Return: '0' on success and failure value on error
2717  */
2718 static int xilinx_dma_chan_probe(struct xilinx_dma_device *xdev,
2719                                   struct device_node *node)
2720 {
2721         struct xilinx_dma_chan *chan;
2722         bool has_dre = false;
2723         u32 value, width;
2724         int err;
2725
2726         /* Allocate and initialize the channel structure */
2727         chan = devm_kzalloc(xdev->dev, sizeof(*chan), GFP_KERNEL);
2728         if (!chan)
2729                 return -ENOMEM;
2730
2731         chan->dev = xdev->dev;
2732         chan->xdev = xdev;
2733         chan->desc_pendingcount = 0x0;
2734         chan->ext_addr = xdev->ext_addr;
2735         /* This variable ensures that descriptors are not
2736          * Submitted when dma engine is in progress. This variable is
2737          * Added to avoid polling for a bit in the status register to
2738          * Know dma state in the driver hot path.
2739          */
2740         chan->idle = true;
2741
2742         spin_lock_init(&chan->lock);
2743         INIT_LIST_HEAD(&chan->pending_list);
2744         INIT_LIST_HEAD(&chan->done_list);
2745         INIT_LIST_HEAD(&chan->active_list);
2746         INIT_LIST_HEAD(&chan->free_seg_list);
2747
2748         /* Retrieve the channel properties from the device tree */
2749         has_dre = of_property_read_bool(node, "xlnx,include-dre");
2750
2751         chan->genlock = of_property_read_bool(node, "xlnx,genlock-mode");
2752
2753         err = of_property_read_u32(node, "xlnx,datawidth", &value);
2754         if (err) {
2755                 dev_err(xdev->dev, "missing xlnx,datawidth property\n");
2756                 return err;
2757         }
2758         width = value >> 3; /* Convert bits to bytes */
2759
2760         /* If data width is greater than 8 bytes, DRE is not in hw */
2761         if (width > 8)
2762                 has_dre = false;
2763
2764         if (!has_dre)
2765                 xdev->common.copy_align = fls(width - 1);
2766
2767         if (of_device_is_compatible(node, "xlnx,axi-vdma-mm2s-channel") ||
2768             of_device_is_compatible(node, "xlnx,axi-dma-mm2s-channel") ||
2769             of_device_is_compatible(node, "xlnx,axi-cdma-channel")) {
2770                 chan->direction = DMA_MEM_TO_DEV;
2771                 chan->id = xdev->mm2s_chan_id++;
2772                 chan->tdest = chan->id;
2773
2774                 chan->ctrl_offset = XILINX_DMA_MM2S_CTRL_OFFSET;
2775                 if (xdev->dma_config->dmatype == XDMA_TYPE_VDMA) {
2776                         chan->desc_offset = XILINX_VDMA_MM2S_DESC_OFFSET;
2777                         chan->config.park = 1;
2778
2779                         if (xdev->flush_on_fsync == XILINX_DMA_FLUSH_BOTH ||
2780                             xdev->flush_on_fsync == XILINX_DMA_FLUSH_MM2S)
2781                                 chan->flush_on_fsync = true;
2782                 }
2783         } else if (of_device_is_compatible(node,
2784                                            "xlnx,axi-vdma-s2mm-channel") ||
2785                    of_device_is_compatible(node,
2786                                            "xlnx,axi-dma-s2mm-channel")) {
2787                 chan->direction = DMA_DEV_TO_MEM;
2788                 chan->id = xdev->s2mm_chan_id++;
2789                 chan->tdest = chan->id - xdev->dma_config->max_channels / 2;
2790                 chan->has_vflip = of_property_read_bool(node,
2791                                         "xlnx,enable-vert-flip");
2792                 if (chan->has_vflip) {
2793                         chan->config.vflip_en = dma_read(chan,
2794                                 XILINX_VDMA_REG_ENABLE_VERTICAL_FLIP) &
2795                                 XILINX_VDMA_ENABLE_VERTICAL_FLIP;
2796                 }
2797
2798                 if (xdev->dma_config->dmatype == XDMA_TYPE_AXIMCDMA)
2799                         chan->ctrl_offset = XILINX_MCDMA_S2MM_CTRL_OFFSET;
2800                 else
2801                         chan->ctrl_offset = XILINX_DMA_S2MM_CTRL_OFFSET;
2802
2803                 if (xdev->dma_config->dmatype == XDMA_TYPE_VDMA) {
2804                         chan->desc_offset = XILINX_VDMA_S2MM_DESC_OFFSET;
2805                         chan->config.park = 1;
2806
2807                         if (xdev->flush_on_fsync == XILINX_DMA_FLUSH_BOTH ||
2808                             xdev->flush_on_fsync == XILINX_DMA_FLUSH_S2MM)
2809                                 chan->flush_on_fsync = true;
2810                 }
2811         } else {
2812                 dev_err(xdev->dev, "Invalid channel compatible node\n");
2813                 return -EINVAL;
2814         }
2815
2816         /* Request the interrupt */
2817         chan->irq = irq_of_parse_and_map(node, chan->tdest);
2818         err = request_irq(chan->irq, xdev->dma_config->irq_handler,
2819                           IRQF_SHARED, "xilinx-dma-controller", chan);
2820         if (err) {
2821                 dev_err(xdev->dev, "unable to request IRQ %d\n", chan->irq);
2822                 return err;
2823         }
2824
2825         if (xdev->dma_config->dmatype == XDMA_TYPE_AXIDMA) {
2826                 chan->start_transfer = xilinx_dma_start_transfer;
2827                 chan->stop_transfer = xilinx_dma_stop_transfer;
2828         } else if (xdev->dma_config->dmatype == XDMA_TYPE_AXIMCDMA) {
2829                 chan->start_transfer = xilinx_mcdma_start_transfer;
2830                 chan->stop_transfer = xilinx_dma_stop_transfer;
2831         } else if (xdev->dma_config->dmatype == XDMA_TYPE_CDMA) {
2832                 chan->start_transfer = xilinx_cdma_start_transfer;
2833                 chan->stop_transfer = xilinx_cdma_stop_transfer;
2834         } else {
2835                 chan->start_transfer = xilinx_vdma_start_transfer;
2836                 chan->stop_transfer = xilinx_dma_stop_transfer;
2837         }
2838
2839         /* check if SG is enabled (only for AXIDMA and CDMA) */
2840         if (xdev->dma_config->dmatype != XDMA_TYPE_VDMA) {
2841                 if (dma_ctrl_read(chan, XILINX_DMA_REG_DMASR) &
2842                     XILINX_DMA_DMASR_SG_MASK)
2843                         chan->has_sg = true;
2844                 dev_dbg(chan->dev, "ch %d: SG %s\n", chan->id,
2845                         chan->has_sg ? "enabled" : "disabled");
2846         }
2847
2848         /* Initialize the tasklet */
2849         tasklet_setup(&chan->tasklet, xilinx_dma_do_tasklet);
2850
2851         /*
2852          * Initialize the DMA channel and add it to the DMA engine channels
2853          * list.
2854          */
2855         chan->common.device = &xdev->common;
2856
2857         list_add_tail(&chan->common.device_node, &xdev->common.channels);
2858         xdev->chan[chan->id] = chan;
2859
2860         /* Reset the channel */
2861         err = xilinx_dma_chan_reset(chan);
2862         if (err < 0) {
2863                 dev_err(xdev->dev, "Reset channel failed\n");
2864                 return err;
2865         }
2866
2867         return 0;
2868 }
2869
2870 /**
2871  * xilinx_dma_child_probe - Per child node probe
2872  * It get number of dma-channels per child node from
2873  * device-tree and initializes all the channels.
2874  *
2875  * @xdev: Driver specific device structure
2876  * @node: Device node
2877  *
2878  * Return: 0 always.
2879  */
2880 static int xilinx_dma_child_probe(struct xilinx_dma_device *xdev,
2881                                     struct device_node *node)
2882 {
2883         int ret, i, nr_channels = 1;
2884
2885         ret = of_property_read_u32(node, "dma-channels", &nr_channels);
2886         if (xdev->dma_config->dmatype == XDMA_TYPE_AXIMCDMA && ret < 0)
2887                 dev_warn(xdev->dev, "missing dma-channels property\n");
2888
2889         for (i = 0; i < nr_channels; i++)
2890                 xilinx_dma_chan_probe(xdev, node);
2891
2892         return 0;
2893 }
2894
2895 /**
2896  * of_dma_xilinx_xlate - Translation function
2897  * @dma_spec: Pointer to DMA specifier as found in the device tree
2898  * @ofdma: Pointer to DMA controller data
2899  *
2900  * Return: DMA channel pointer on success and NULL on error
2901  */
2902 static struct dma_chan *of_dma_xilinx_xlate(struct of_phandle_args *dma_spec,
2903                                                 struct of_dma *ofdma)
2904 {
2905         struct xilinx_dma_device *xdev = ofdma->of_dma_data;
2906         int chan_id = dma_spec->args[0];
2907
2908         if (chan_id >= xdev->dma_config->max_channels || !xdev->chan[chan_id])
2909                 return NULL;
2910
2911         return dma_get_slave_channel(&xdev->chan[chan_id]->common);
2912 }
2913
2914 static const struct xilinx_dma_config axidma_config = {
2915         .dmatype = XDMA_TYPE_AXIDMA,
2916         .clk_init = axidma_clk_init,
2917         .irq_handler = xilinx_dma_irq_handler,
2918         .max_channels = XILINX_DMA_MAX_CHANS_PER_DEVICE,
2919 };
2920
2921 static const struct xilinx_dma_config aximcdma_config = {
2922         .dmatype = XDMA_TYPE_AXIMCDMA,
2923         .clk_init = axidma_clk_init,
2924         .irq_handler = xilinx_mcdma_irq_handler,
2925         .max_channels = XILINX_MCDMA_MAX_CHANS_PER_DEVICE,
2926 };
2927 static const struct xilinx_dma_config axicdma_config = {
2928         .dmatype = XDMA_TYPE_CDMA,
2929         .clk_init = axicdma_clk_init,
2930         .irq_handler = xilinx_dma_irq_handler,
2931         .max_channels = XILINX_CDMA_MAX_CHANS_PER_DEVICE,
2932 };
2933
2934 static const struct xilinx_dma_config axivdma_config = {
2935         .dmatype = XDMA_TYPE_VDMA,
2936         .clk_init = axivdma_clk_init,
2937         .irq_handler = xilinx_dma_irq_handler,
2938         .max_channels = XILINX_DMA_MAX_CHANS_PER_DEVICE,
2939 };
2940
2941 static const struct of_device_id xilinx_dma_of_ids[] = {
2942         { .compatible = "xlnx,axi-dma-1.00.a", .data = &axidma_config },
2943         { .compatible = "xlnx,axi-cdma-1.00.a", .data = &axicdma_config },
2944         { .compatible = "xlnx,axi-vdma-1.00.a", .data = &axivdma_config },
2945         { .compatible = "xlnx,axi-mcdma-1.00.a", .data = &aximcdma_config },
2946         {}
2947 };
2948 MODULE_DEVICE_TABLE(of, xilinx_dma_of_ids);
2949
2950 /**
2951  * xilinx_dma_probe - Driver probe function
2952  * @pdev: Pointer to the platform_device structure
2953  *
2954  * Return: '0' on success and failure value on error
2955  */
2956 static int xilinx_dma_probe(struct platform_device *pdev)
2957 {
2958         int (*clk_init)(struct platform_device *, struct clk **, struct clk **,
2959                         struct clk **, struct clk **, struct clk **)
2960                                         = axivdma_clk_init;
2961         struct device_node *node = pdev->dev.of_node;
2962         struct xilinx_dma_device *xdev;
2963         struct device_node *child, *np = pdev->dev.of_node;
2964         u32 num_frames, addr_width, len_width;
2965         int i, err;
2966
2967         /* Allocate and initialize the DMA engine structure */
2968         xdev = devm_kzalloc(&pdev->dev, sizeof(*xdev), GFP_KERNEL);
2969         if (!xdev)
2970                 return -ENOMEM;
2971
2972         xdev->dev = &pdev->dev;
2973         if (np) {
2974                 const struct of_device_id *match;
2975
2976                 match = of_match_node(xilinx_dma_of_ids, np);
2977                 if (match && match->data) {
2978                         xdev->dma_config = match->data;
2979                         clk_init = xdev->dma_config->clk_init;
2980                 }
2981         }
2982
2983         err = clk_init(pdev, &xdev->axi_clk, &xdev->tx_clk, &xdev->txs_clk,
2984                        &xdev->rx_clk, &xdev->rxs_clk);
2985         if (err)
2986                 return err;
2987
2988         /* Request and map I/O memory */
2989         xdev->regs = devm_platform_ioremap_resource(pdev, 0);
2990         if (IS_ERR(xdev->regs))
2991                 return PTR_ERR(xdev->regs);
2992
2993         /* Retrieve the DMA engine properties from the device tree */
2994         xdev->max_buffer_len = GENMASK(XILINX_DMA_MAX_TRANS_LEN_MAX - 1, 0);
2995         xdev->s2mm_chan_id = xdev->dma_config->max_channels / 2;
2996
2997         if (xdev->dma_config->dmatype == XDMA_TYPE_AXIDMA ||
2998             xdev->dma_config->dmatype == XDMA_TYPE_AXIMCDMA) {
2999                 if (!of_property_read_u32(node, "xlnx,sg-length-width",
3000                                           &len_width)) {
3001                         if (len_width < XILINX_DMA_MAX_TRANS_LEN_MIN ||
3002                             len_width > XILINX_DMA_V2_MAX_TRANS_LEN_MAX) {
3003                                 dev_warn(xdev->dev,
3004                                          "invalid xlnx,sg-length-width property value. Using default width\n");
3005                         } else {
3006                                 if (len_width > XILINX_DMA_MAX_TRANS_LEN_MAX)
3007                                         dev_warn(xdev->dev, "Please ensure that IP supports buffer length > 23 bits\n");
3008                                 xdev->max_buffer_len =
3009                                         GENMASK(len_width - 1, 0);
3010                         }
3011                 }
3012         }
3013
3014         if (xdev->dma_config->dmatype == XDMA_TYPE_VDMA) {
3015                 err = of_property_read_u32(node, "xlnx,num-fstores",
3016                                            &num_frames);
3017                 if (err < 0) {
3018                         dev_err(xdev->dev,
3019                                 "missing xlnx,num-fstores property\n");
3020                         return err;
3021                 }
3022
3023                 err = of_property_read_u32(node, "xlnx,flush-fsync",
3024                                            &xdev->flush_on_fsync);
3025                 if (err < 0)
3026                         dev_warn(xdev->dev,
3027                                  "missing xlnx,flush-fsync property\n");
3028         }
3029
3030         err = of_property_read_u32(node, "xlnx,addrwidth", &addr_width);
3031         if (err < 0)
3032                 dev_warn(xdev->dev, "missing xlnx,addrwidth property\n");
3033
3034         if (addr_width > 32)
3035                 xdev->ext_addr = true;
3036         else
3037                 xdev->ext_addr = false;
3038
3039         /* Set the dma mask bits */
3040         dma_set_mask(xdev->dev, DMA_BIT_MASK(addr_width));
3041
3042         /* Initialize the DMA engine */
3043         xdev->common.dev = &pdev->dev;
3044
3045         INIT_LIST_HEAD(&xdev->common.channels);
3046         if (!(xdev->dma_config->dmatype == XDMA_TYPE_CDMA)) {
3047                 dma_cap_set(DMA_SLAVE, xdev->common.cap_mask);
3048                 dma_cap_set(DMA_PRIVATE, xdev->common.cap_mask);
3049         }
3050
3051         xdev->common.device_alloc_chan_resources =
3052                                 xilinx_dma_alloc_chan_resources;
3053         xdev->common.device_free_chan_resources =
3054                                 xilinx_dma_free_chan_resources;
3055         xdev->common.device_terminate_all = xilinx_dma_terminate_all;
3056         xdev->common.device_tx_status = xilinx_dma_tx_status;
3057         xdev->common.device_issue_pending = xilinx_dma_issue_pending;
3058         if (xdev->dma_config->dmatype == XDMA_TYPE_AXIDMA) {
3059                 dma_cap_set(DMA_CYCLIC, xdev->common.cap_mask);
3060                 xdev->common.device_prep_slave_sg = xilinx_dma_prep_slave_sg;
3061                 xdev->common.device_prep_dma_cyclic =
3062                                           xilinx_dma_prep_dma_cyclic;
3063                 /* Residue calculation is supported by only AXI DMA and CDMA */
3064                 xdev->common.residue_granularity =
3065                                           DMA_RESIDUE_GRANULARITY_SEGMENT;
3066         } else if (xdev->dma_config->dmatype == XDMA_TYPE_CDMA) {
3067                 dma_cap_set(DMA_MEMCPY, xdev->common.cap_mask);
3068                 xdev->common.device_prep_dma_memcpy = xilinx_cdma_prep_memcpy;
3069                 /* Residue calculation is supported by only AXI DMA and CDMA */
3070                 xdev->common.residue_granularity =
3071                                           DMA_RESIDUE_GRANULARITY_SEGMENT;
3072         } else if (xdev->dma_config->dmatype == XDMA_TYPE_AXIMCDMA) {
3073                 xdev->common.device_prep_slave_sg = xilinx_mcdma_prep_slave_sg;
3074         } else {
3075                 xdev->common.device_prep_interleaved_dma =
3076                                 xilinx_vdma_dma_prep_interleaved;
3077         }
3078
3079         platform_set_drvdata(pdev, xdev);
3080
3081         /* Initialize the channels */
3082         for_each_child_of_node(node, child) {
3083                 err = xilinx_dma_child_probe(xdev, child);
3084                 if (err < 0)
3085                         goto disable_clks;
3086         }
3087
3088         if (xdev->dma_config->dmatype == XDMA_TYPE_VDMA) {
3089                 for (i = 0; i < xdev->dma_config->max_channels; i++)
3090                         if (xdev->chan[i])
3091                                 xdev->chan[i]->num_frms = num_frames;
3092         }
3093
3094         /* Register the DMA engine with the core */
3095         dma_async_device_register(&xdev->common);
3096
3097         err = of_dma_controller_register(node, of_dma_xilinx_xlate,
3098                                          xdev);
3099         if (err < 0) {
3100                 dev_err(&pdev->dev, "Unable to register DMA to DT\n");
3101                 dma_async_device_unregister(&xdev->common);
3102                 goto error;
3103         }
3104
3105         if (xdev->dma_config->dmatype == XDMA_TYPE_AXIDMA)
3106                 dev_info(&pdev->dev, "Xilinx AXI DMA Engine Driver Probed!!\n");
3107         else if (xdev->dma_config->dmatype == XDMA_TYPE_CDMA)
3108                 dev_info(&pdev->dev, "Xilinx AXI CDMA Engine Driver Probed!!\n");
3109         else if (xdev->dma_config->dmatype == XDMA_TYPE_AXIMCDMA)
3110                 dev_info(&pdev->dev, "Xilinx AXI MCDMA Engine Driver Probed!!\n");
3111         else
3112                 dev_info(&pdev->dev, "Xilinx AXI VDMA Engine Driver Probed!!\n");
3113
3114         return 0;
3115
3116 disable_clks:
3117         xdma_disable_allclks(xdev);
3118 error:
3119         for (i = 0; i < xdev->dma_config->max_channels; i++)
3120                 if (xdev->chan[i])
3121                         xilinx_dma_chan_remove(xdev->chan[i]);
3122
3123         return err;
3124 }
3125
3126 /**
3127  * xilinx_dma_remove - Driver remove function
3128  * @pdev: Pointer to the platform_device structure
3129  *
3130  * Return: Always '0'
3131  */
3132 static int xilinx_dma_remove(struct platform_device *pdev)
3133 {
3134         struct xilinx_dma_device *xdev = platform_get_drvdata(pdev);
3135         int i;
3136
3137         of_dma_controller_free(pdev->dev.of_node);
3138
3139         dma_async_device_unregister(&xdev->common);
3140
3141         for (i = 0; i < xdev->dma_config->max_channels; i++)
3142                 if (xdev->chan[i])
3143                         xilinx_dma_chan_remove(xdev->chan[i]);
3144
3145         xdma_disable_allclks(xdev);
3146
3147         return 0;
3148 }
3149
3150 static struct platform_driver xilinx_vdma_driver = {
3151         .driver = {
3152                 .name = "xilinx-vdma",
3153                 .of_match_table = xilinx_dma_of_ids,
3154         },
3155         .probe = xilinx_dma_probe,
3156         .remove = xilinx_dma_remove,
3157 };
3158
3159 module_platform_driver(xilinx_vdma_driver);
3160
3161 MODULE_AUTHOR("Xilinx, Inc.");
3162 MODULE_DESCRIPTION("Xilinx VDMA driver");
3163 MODULE_LICENSE("GPL v2");