drivers/usb/serial/quatech2.c

   1 /*
   2  * usb-serial driver for Quatech USB 2 devices
   3  *
   4  * Copyright (C) 2012 Bill Pemberton ([email protected])
   5  *
   6  * This program is free software; you can redistribute it and/or
   7  * modify it under the terms of the GNU General Public License version 2
   8  * as published by the Free Software Foundation.
   9  *
  10  *
  11  *  These devices all have only 1 bulk in and 1 bulk out that is shared
  12  *  for all serial ports.
  13  *
  14  */
  15
  16 #include <asm/unaligned.h>
  17 #include <linux/errno.h>
  18 #include <linux/slab.h>
  19 #include <linux/tty.h>
  20 #include <linux/tty_driver.h>
  21 #include <linux/tty_flip.h>
  22 #include <linux/module.h>
  23 #include <linux/serial.h>
  24 #include <linux/usb.h>
  25 #include <linux/usb/serial.h>
  26 #include <linux/serial_reg.h>
  27 #include <linux/uaccess.h>
  28
  29 /* default urb timeout for usb operations */
  30 #define QT2_USB_TIMEOUT USB_CTRL_SET_TIMEOUT
  31
  32 #define QT_OPEN_CLOSE_CHANNEL       0xca
  33 #define QT_SET_GET_DEVICE           0xc2
  34 #define QT_SET_GET_REGISTER         0xc0
  35 #define QT_GET_SET_PREBUF_TRIG_LVL  0xcc
  36 #define QT_SET_ATF                  0xcd
  37 #define QT_TRANSFER_IN              0xc0
  38 #define QT_HW_FLOW_CONTROL_MASK     0xc5
  39 #define QT_SW_FLOW_CONTROL_MASK     0xc6
  40 #define QT2_BREAK_CONTROL           0xc8
  41 #define QT2_GET_SET_UART            0xc1
  42 #define QT2_FLUSH_DEVICE            0xc4
  43 #define QT2_GET_SET_QMCR            0xe1
  44 #define QT2_QMCR_RS232              0x40
  45 #define QT2_QMCR_RS422              0x10
  46
  47 #define  SERIAL_CRTSCTS ((UART_MCR_RTS << 8) | UART_MSR_CTS)
  48
  49 #define  SERIAL_EVEN_PARITY         (UART_LCR_PARITY | UART_LCR_EPAR)
  50
  51 /* status bytes for the device */
  52 #define QT2_CONTROL_BYTE    0x1b
  53 #define QT2_LINE_STATUS     0x00  /* following 1 byte is line status */
  54 #define QT2_MODEM_STATUS    0x01  /* following 1 byte is modem status */
  55 #define QT2_XMIT_HOLD       0x02  /* following 2 bytes are ?? */
  56 #define QT2_CHANGE_PORT     0x03  /* following 1 byte is port to change to */
  57 #define QT2_REC_FLUSH       0x04  /* no following info */
  58 #define QT2_XMIT_FLUSH      0x05  /* no following info */
  59 #define QT2_CONTROL_ESCAPE  0xff  /* pass through previous 2 control bytes */
  60
  61 #define  MAX_BAUD_RATE              921600
  62 #define  DEFAULT_BAUD_RATE          9600
  63
  64 #define QT2_READ_BUFFER_SIZE    512  /* size of read buffer */
  65 #define QT2_WRITE_BUFFER_SIZE   512  /* size of write buffer */
  66 #define QT2_WRITE_CONTROL_SIZE  5    /* control bytes used for a write */
  67
  68 #define DRIVER_DESC "Quatech 2nd gen USB to Serial Driver"
  69
  70 #define USB_VENDOR_ID_QUATECH   0x061d
  71 #define QUATECH_SSU2_100        0xC120  /* RS232 single port */
  72 #define QUATECH_DSU2_100        0xC140  /* RS232 dual port */
  73 #define QUATECH_DSU2_400        0xC150  /* RS232/422/485 dual port */
  74 #define QUATECH_QSU2_100        0xC160  /* RS232 four port */
  75 #define QUATECH_QSU2_400        0xC170  /* RS232/422/485 four port */
  76 #define QUATECH_ESU2_100        0xC1A0  /* RS232 eight port */
  77 #define QUATECH_ESU2_400        0xC180  /* RS232/422/485 eight port */
  78
  79 struct qt2_device_detail {
  80         int product_id;
  81         int num_ports;
  82 };
  83
  84 #define QT_DETAILS(prod, ports) \
  85         .product_id = (prod),   \
  86         .num_ports = (ports)
  87
  88 static const struct qt2_device_detail qt2_device_details[] = {
  89         {QT_DETAILS(QUATECH_SSU2_100, 1)},
  90         {QT_DETAILS(QUATECH_DSU2_400, 2)},
  91         {QT_DETAILS(QUATECH_DSU2_100, 2)},
  92         {QT_DETAILS(QUATECH_QSU2_400, 4)},
  93         {QT_DETAILS(QUATECH_QSU2_100, 4)},
  94         {QT_DETAILS(QUATECH_ESU2_400, 8)},
  95         {QT_DETAILS(QUATECH_ESU2_100, 8)},
  96         {QT_DETAILS(0, 0)}      /* Terminating entry */
  97 };
  98
  99 static const struct usb_device_id id_table[] = {
 100         {USB_DEVICE(USB_VENDOR_ID_QUATECH, QUATECH_SSU2_100)},
 101         {USB_DEVICE(USB_VENDOR_ID_QUATECH, QUATECH_DSU2_100)},
 102         {USB_DEVICE(USB_VENDOR_ID_QUATECH, QUATECH_DSU2_400)},
 103         {USB_DEVICE(USB_VENDOR_ID_QUATECH, QUATECH_QSU2_100)},
 104         {USB_DEVICE(USB_VENDOR_ID_QUATECH, QUATECH_QSU2_400)},
 105         {USB_DEVICE(USB_VENDOR_ID_QUATECH, QUATECH_ESU2_100)},
 106         {USB_DEVICE(USB_VENDOR_ID_QUATECH, QUATECH_ESU2_400)},
 107         {}                      /* Terminating entry */
 108 };
 109 MODULE_DEVICE_TABLE(usb, id_table);
 110
 111 struct qt2_serial_private {
 112         unsigned char current_port;  /* current port for incoming data */
 113
 114         struct urb      *read_urb;   /* shared among all ports */
 115         char            *read_buffer;
 116 };
 117
 118 struct qt2_port_private {
 119         u8   device_port;
 120
 121         spinlock_t urb_lock;
 122         bool       urb_in_use;
 123         struct urb *write_urb;
 124         char       *write_buffer;
 125
 126         spinlock_t  lock;
 127         u8          shadowLSR;
 128         u8          shadowMSR;
 129
 130         struct usb_serial_port *port;
 131 };
 132
 133 static void qt2_update_lsr(struct usb_serial_port *port, unsigned char *ch);
 134 static void qt2_update_msr(struct usb_serial_port *port, unsigned char *ch);
 135 static void qt2_write_bulk_callback(struct urb *urb);
 136 static void qt2_read_bulk_callback(struct urb *urb);
 137
 138 static void qt2_release(struct usb_serial *serial)
 139 {
 140         struct qt2_serial_private *serial_priv;
 141
 142         serial_priv = usb_get_serial_data(serial);
 143
 144         usb_kill_urb(serial_priv->read_urb);
 145         usb_free_urb(serial_priv->read_urb);
 146         kfree(serial_priv->read_buffer);
 147         kfree(serial_priv);
 148 }
 149
 150 static inline int calc_baud_divisor(int baudrate)
 151 {
 152         int divisor, rem;
 153
 154         divisor = MAX_BAUD_RATE / baudrate;
 155         rem = MAX_BAUD_RATE % baudrate;
 156         /* Round to nearest divisor */
 157         if (((rem * 2) >= baudrate) && (baudrate != 110))
 158                 divisor++;
 159
 160         return divisor;
 161 }
 162
 163 static inline int qt2_set_port_config(struct usb_device *dev,
 164                                       unsigned char port_number,
 165                                       u16 baudrate, u16 lcr)
 166 {
 167         int divisor = calc_baud_divisor(baudrate);
 168         u16 index = ((u16) (lcr << 8) | (u16) (port_number));
 169
 170         return usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
 171                                QT2_GET_SET_UART, 0x40,
 172                                divisor, index, NULL, 0, QT2_USB_TIMEOUT);
 173 }
 174
 175 static inline int qt2_control_msg(struct usb_device *dev,
 176                                   u8 request, u16 data, u16 index)
 177 {
 178         return usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
 179                                request, 0x40, data, index,
 180                                NULL, 0, QT2_USB_TIMEOUT);
 181 }
 182
 183 static inline int qt2_setdevice(struct usb_device *dev, u8 *data)
 184 {
 185         u16 x = ((u16) (data[1] << 8) | (u16) (data[0]));
 186
 187         return qt2_control_msg(dev, QT_SET_GET_DEVICE, x, 0);
 188 }
 189
 190
 191 static inline int qt2_getdevice(struct usb_device *dev, u8 *data)
 192 {
 193         return usb_control_msg(dev, usb_rcvctrlpipe(dev, 0),
 194                                QT_SET_GET_DEVICE, 0xc0, 0, 0,
 195                                data, 3, QT2_USB_TIMEOUT);
 196 }
 197
 198 static inline int qt2_getregister(struct usb_device *dev,
 199                                   u8 uart,
 200                                   u8 reg,
 201                                   u8 *data)
 202 {
 203         return usb_control_msg(dev, usb_rcvctrlpipe(dev, 0),
 204                                QT_SET_GET_REGISTER, 0xc0, reg,
 205                                uart, data, sizeof(*data), QT2_USB_TIMEOUT);
 206
 207 }
 208
 209 static inline int qt2_setregister(struct usb_device *dev,
 210                                   u8 uart, u8 reg, u16 data)
 211 {
 212         u16 value = (data << 8) | reg;
 213
 214         return usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
 215                                QT_SET_GET_REGISTER, 0x40, value, uart,
 216                                NULL, 0, QT2_USB_TIMEOUT);
 217 }
 218
 219 static inline int update_mctrl(struct qt2_port_private *port_priv,
 220                                unsigned int set, unsigned int clear)
 221 {
 222         struct usb_serial_port *port = port_priv->port;
 223         struct usb_device *dev = port->serial->dev;
 224         unsigned urb_value;
 225         int status;
 226
 227         if (((set | clear) & (TIOCM_DTR | TIOCM_RTS)) == 0) {
 228                 dev_dbg(&port->dev,
 229                         "update_mctrl - DTR|RTS not being set|cleared\n");
 230                 return 0;       /* no change */
 231         }
 232
 233         clear &= ~set;  /* 'set' takes precedence over 'clear' */
 234         urb_value = 0;
 235         if (set & TIOCM_DTR)
 236                 urb_value |= UART_MCR_DTR;
 237         if (set & TIOCM_RTS)
 238                 urb_value |= UART_MCR_RTS;
 239
 240         status = qt2_setregister(dev, port_priv->device_port, UART_MCR,
 241                                  urb_value);
 242         if (status < 0)
 243                 dev_err(&port->dev,
 244                         "update_mctrl - Error from MODEM_CTRL urb: %i\n",
 245                         status);
 246         return status;
 247 }
 248
 249 static int qt2_calc_num_ports(struct usb_serial *serial)
 250 {
 251         struct qt2_device_detail d;
 252         int i;
 253
 254         for (i = 0; d = qt2_device_details[i], d.product_id != 0; i++) {
 255                 if (d.product_id == le16_to_cpu(serial->dev->descriptor.idProduct))
 256                         return d.num_ports;
 257         }
 258
 259         /* we didn't recognize the device */
 260         dev_err(&serial->dev->dev,
 261                  "don't know the number of ports, assuming 1\n");
 262
 263         return 1;
 264 }
 265
 266 static void qt2_set_termios(struct tty_struct *tty,
 267                             struct usb_serial_port *port,
 268                             struct ktermios *old_termios)
 269 {
 270         struct usb_device *dev = port->serial->dev;
 271         struct qt2_port_private *port_priv;
 272         struct ktermios *termios = &tty->termios;
 273         u16 baud;
 274         unsigned int cflag = termios->c_cflag;
 275         u16 new_lcr = 0;
 276         int status;
 277
 278         port_priv = usb_get_serial_port_data(port);
 279
 280         if (cflag & PARENB) {
 281                 if (cflag & PARODD)
 282                         new_lcr |= UART_LCR_PARITY;
 283                 else
 284                         new_lcr |= SERIAL_EVEN_PARITY;
 285         }
 286
 287         switch (cflag & CSIZE) {
 288         case CS5:
 289                 new_lcr |= UART_LCR_WLEN5;
 290                 break;
 291         case CS6:
 292                 new_lcr |= UART_LCR_WLEN6;
 293                 break;
 294         case CS7:
 295                 new_lcr |= UART_LCR_WLEN7;
 296                 break;
 297         default:
 298         case CS8:
 299                 new_lcr |= UART_LCR_WLEN8;
 300                 break;
 301         }
 302
 303         baud = tty_get_baud_rate(tty);
 304         if (!baud)
 305                 baud = 9600;
 306
 307         status = qt2_set_port_config(dev, port_priv->device_port, baud,
 308                                      new_lcr);
 309         if (status < 0)
 310                 dev_err(&port->dev, "%s - qt2_set_port_config failed: %i\n",
 311                         __func__, status);
 312
 313         if (cflag & CRTSCTS)
 314                 status = qt2_control_msg(dev, QT_HW_FLOW_CONTROL_MASK,
 315                                          SERIAL_CRTSCTS,
 316                                          port_priv->device_port);
 317         else
 318                 status = qt2_control_msg(dev, QT_HW_FLOW_CONTROL_MASK,
 319                                          0, port_priv->device_port);
 320         if (status < 0)
 321                 dev_err(&port->dev, "%s - set HW flow control failed: %i\n",
 322                         __func__, status);
 323
 324         if (I_IXOFF(tty) || I_IXON(tty)) {
 325                 u16 x = ((u16) (START_CHAR(tty) << 8) | (u16) (STOP_CHAR(tty)));
 326
 327                 status = qt2_control_msg(dev, QT_SW_FLOW_CONTROL_MASK,
 328                                          x, port_priv->device_port);
 329         } else
 330                 status = qt2_control_msg(dev, QT_SW_FLOW_CONTROL_MASK,
 331                                          0, port_priv->device_port);
 332
 333         if (status < 0)
 334                 dev_err(&port->dev, "%s - set SW flow control failed: %i\n",
 335                         __func__, status);
 336
 337 }
 338
 339 static int qt2_open(struct tty_struct *tty, struct usb_serial_port *port)
 340 {
 341         struct usb_serial *serial;
 342         struct qt2_port_private *port_priv;
 343         u8 *data;
 344         u16 device_port;
 345         int status;
 346         unsigned long flags;
 347
 348         device_port = port->port_number;
 349
 350         serial = port->serial;
 351
 352         port_priv = usb_get_serial_port_data(port);
 353
 354         /* set the port to RS232 mode */
 355         status = qt2_control_msg(serial->dev, QT2_GET_SET_QMCR,
 356                                  QT2_QMCR_RS232, device_port);
 357         if (status < 0) {
 358                 dev_err(&port->dev,
 359                         "%s failed to set RS232 mode for port %i error %i\n",
 360                         __func__, device_port, status);
 361                 return status;
 362         }
 363
 364         data = kzalloc(2, GFP_KERNEL);
 365         if (!data)
 366                 return -ENOMEM;
 367
 368         /* open the port */
 369         status = usb_control_msg(serial->dev,
 370                                  usb_rcvctrlpipe(serial->dev, 0),
 371                                  QT_OPEN_CLOSE_CHANNEL,
 372                                  0xc0, 0,
 373                                  device_port, data, 2, QT2_USB_TIMEOUT);
 374
 375         if (status < 0) {
 376                 dev_err(&port->dev, "%s - open port failed %i\n", __func__,
 377                         status);
 378                 kfree(data);
 379                 return status;
 380         }
 381
 382         spin_lock_irqsave(&port_priv->lock, flags);
 383         port_priv->shadowLSR = data[0];
 384         port_priv->shadowMSR = data[1];
 385         spin_unlock_irqrestore(&port_priv->lock, flags);
 386
 387         kfree(data);
 388
 389         /* set to default speed and 8bit word size */
 390         status = qt2_set_port_config(serial->dev, device_port,
 391                                      DEFAULT_BAUD_RATE, UART_LCR_WLEN8);
 392         if (status < 0) {
 393                 dev_err(&port->dev, "%s - initial setup failed (%i)\n",
 394                         __func__, device_port);
 395                 return status;
 396         }
 397
 398         port_priv->device_port = (u8) device_port;
 399
 400         if (tty)
 401                 qt2_set_termios(tty, port, &tty->termios);
 402
 403         return 0;
 404
 405 }
 406
 407 static void qt2_close(struct usb_serial_port *port)
 408 {
 409         struct usb_serial *serial;
 410         struct qt2_port_private *port_priv;
 411         unsigned long flags;
 412         int i;
 413
 414         serial = port->serial;
 415         port_priv = usb_get_serial_port_data(port);
 416
 417         spin_lock_irqsave(&port_priv->urb_lock, flags);
 418         usb_kill_urb(port_priv->write_urb);
 419         port_priv->urb_in_use = false;
 420         spin_unlock_irqrestore(&port_priv->urb_lock, flags);
 421
 422         /* flush the port transmit buffer */
 423         i = usb_control_msg(serial->dev,
 424                             usb_rcvctrlpipe(serial->dev, 0),
 425                             QT2_FLUSH_DEVICE, 0x40, 1,
 426                             port_priv->device_port, NULL, 0, QT2_USB_TIMEOUT);
 427
 428         if (i < 0)
 429                 dev_err(&port->dev, "%s - transmit buffer flush failed: %i\n",
 430                         __func__, i);
 431
 432         /* flush the port receive buffer */
 433         i = usb_control_msg(serial->dev,
 434                             usb_rcvctrlpipe(serial->dev, 0),
 435                             QT2_FLUSH_DEVICE, 0x40, 0,
 436                             port_priv->device_port, NULL, 0, QT2_USB_TIMEOUT);
 437
 438         if (i < 0)
 439                 dev_err(&port->dev, "%s - receive buffer flush failed: %i\n",
 440                         __func__, i);
 441
 442         /* close the port */
 443         i = usb_control_msg(serial->dev,
 444                             usb_sndctrlpipe(serial->dev, 0),
 445                             QT_OPEN_CLOSE_CHANNEL,
 446                             0x40, 0,
 447                             port_priv->device_port, NULL, 0, QT2_USB_TIMEOUT);
 448
 449         if (i < 0)
 450                 dev_err(&port->dev, "%s - close port failed %i\n",
 451                         __func__, i);
 452 }
 453
 454 static void qt2_disconnect(struct usb_serial *serial)
 455 {
 456         struct qt2_serial_private *serial_priv = usb_get_serial_data(serial);
 457
 458         usb_kill_urb(serial_priv->read_urb);
 459 }
 460
 461 static int get_serial_info(struct usb_serial_port *port,
 462                            struct serial_struct __user *retinfo)
 463 {
 464         struct serial_struct tmp;
 465
 466         memset(&tmp, 0, sizeof(tmp));
 467         tmp.line                = port->minor;
 468         tmp.port                = 0;
 469         tmp.irq                 = 0;
 470         tmp.flags               = ASYNC_SKIP_TEST | ASYNC_AUTO_IRQ;
 471         tmp.xmit_fifo_size      = port->bulk_out_size;
 472         tmp.baud_base           = 9600;
 473         tmp.close_delay         = 5*HZ;
 474         tmp.closing_wait        = 30*HZ;
 475
 476         if (copy_to_user(retinfo, &tmp, sizeof(*retinfo)))
 477                 return -EFAULT;
 478         return 0;
 479 }
 480
 481 static int qt2_ioctl(struct tty_struct *tty,
 482                      unsigned int cmd, unsigned long arg)
 483 {
 484         struct usb_serial_port *port = tty->driver_data;
 485
 486         switch (cmd) {
 487         case TIOCGSERIAL:
 488                 return get_serial_info(port,
 489                                        (struct serial_struct __user *)arg);
 490         default:
 491                 break;
 492         }
 493
 494         return -ENOIOCTLCMD;
 495 }
 496
 497 static void qt2_process_status(struct usb_serial_port *port, unsigned char *ch)
 498 {
 499         switch (*ch) {
 500         case QT2_LINE_STATUS:
 501                 qt2_update_lsr(port, ch + 1);
 502                 break;
 503         case QT2_MODEM_STATUS:
 504                 qt2_update_msr(port, ch + 1);
 505                 break;
 506         }
 507 }
 508
 509 /* not needed, kept to document functionality */
 510 static void qt2_process_xmit_empty(struct usb_serial_port *port,
 511                                    unsigned char *ch)
 512 {
 513         int bytes_written;
 514
 515         bytes_written = (int)(*ch) + (int)(*(ch + 1) << 4);
 516 }
 517
 518 /* not needed, kept to document functionality */
 519 static void qt2_process_flush(struct usb_serial_port *port, unsigned char *ch)
 520 {
 521         return;
 522 }
 523
 524 static void qt2_process_read_urb(struct urb *urb)
 525 {
 526         struct usb_serial *serial;
 527         struct qt2_serial_private *serial_priv;
 528         struct usb_serial_port *port;
 529         struct qt2_port_private *port_priv;
 530         bool escapeflag;
 531         unsigned char *ch;
 532         int i;
 533         unsigned char newport;
 534         int len = urb->actual_length;
 535
 536         if (!len)
 537                 return;
 538
 539         ch = urb->transfer_buffer;
 540         serial = urb->context;
 541         serial_priv = usb_get_serial_data(serial);
 542         port = serial->port[serial_priv->current_port];
 543         port_priv = usb_get_serial_port_data(port);
 544
 545         for (i = 0; i < urb->actual_length; i++) {
 546                 ch = (unsigned char *)urb->transfer_buffer + i;
 547                 if ((i <= (len - 3)) &&
 548                     (*ch == QT2_CONTROL_BYTE) &&
 549                     (*(ch + 1) == QT2_CONTROL_BYTE)) {
 550                         escapeflag = false;
 551                         switch (*(ch + 2)) {
 552                         case QT2_LINE_STATUS:
 553                         case QT2_MODEM_STATUS:
 554                                 if (i > (len - 4)) {
 555                                         dev_warn(&port->dev,
 556                                                  "%s - status message too short\n",
 557                                                 __func__);
 558                                         break;
 559                                 }
 560                                 qt2_process_status(port, ch + 2);
 561                                 i += 3;
 562                                 escapeflag = true;
 563                                 break;
 564                         case QT2_XMIT_HOLD:
 565                                 if (i > (len - 5)) {
 566                                         dev_warn(&port->dev,
 567                                                  "%s - xmit_empty message too short\n",
 568                                                  __func__);
 569                                         break;
 570                                 }
 571                                 qt2_process_xmit_empty(port, ch + 3);
 572                                 i += 4;
 573                                 escapeflag = true;
 574                                 break;
 575                         case QT2_CHANGE_PORT:
 576                                 if (i > (len - 4)) {
 577                                         dev_warn(&port->dev,
 578                                                  "%s - change_port message too short\n",
 579                                                  __func__);
 580                                         break;
 581                                 }
 582                                 tty_flip_buffer_push(&port->port);
 583
 584                                 newport = *(ch + 3);
 585
 586                                 if (newport > serial->num_ports) {
 587                                         dev_err(&port->dev,
 588                                                 "%s - port change to invalid port: %i\n",
 589                                                 __func__, newport);
 590                                         break;
 591                                 }
 592
 593                                 serial_priv->current_port = newport;
 594                                 port = serial->port[serial_priv->current_port];
 595                                 port_priv = usb_get_serial_port_data(port);
 596                                 i += 3;
 597                                 escapeflag = true;
 598                                 break;
 599                         case QT2_REC_FLUSH:
 600                         case QT2_XMIT_FLUSH:
 601                                 qt2_process_flush(port, ch + 2);
 602                                 i += 2;
 603                                 escapeflag = true;
 604                                 break;
 605                         case QT2_CONTROL_ESCAPE:
 606                                 tty_buffer_request_room(&port->port, 2);
 607                                 tty_insert_flip_string(&port->port, ch, 2);
 608                                 i += 2;
 609                                 escapeflag = true;
 610                                 break;
 611                         default:
 612                                 dev_warn(&port->dev,
 613                                          "%s - unsupported command %i\n",
 614                                          __func__, *(ch + 2));
 615                                 break;
 616                         }
 617                         if (escapeflag)
 618                                 continue;
 619                 }
 620
 621                 tty_buffer_request_room(&port->port, 1);
 622                 tty_insert_flip_string(&port->port, ch, 1);
 623         }
 624
 625         tty_flip_buffer_push(&port->port);
 626 }
 627
 628 static void qt2_write_bulk_callback(struct urb *urb)
 629 {
 630         struct usb_serial_port *port;
 631         struct qt2_port_private *port_priv;
 632
 633         port = urb->context;
 634         port_priv = usb_get_serial_port_data(port);
 635
 636         spin_lock(&port_priv->urb_lock);
 637
 638         port_priv->urb_in_use = false;
 639         usb_serial_port_softint(port);
 640
 641         spin_unlock(&port_priv->urb_lock);
 642
 643 }
 644
 645 static void qt2_read_bulk_callback(struct urb *urb)
 646 {
 647         struct usb_serial *serial = urb->context;
 648         int status;
 649
 650         if (urb->status) {
 651                 dev_warn(&serial->dev->dev,
 652                          "%s - non-zero urb status: %i\n", __func__,
 653                          urb->status);
 654                 return;
 655         }
 656
 657         qt2_process_read_urb(urb);
 658
 659         status = usb_submit_urb(urb, GFP_ATOMIC);
 660         if (status != 0)
 661                 dev_err(&serial->dev->dev,
 662                         "%s - resubmit read urb failed: %i\n",
 663                         __func__, status);
 664 }
 665
 666 static int qt2_setup_urbs(struct usb_serial *serial)
 667 {
 668         struct usb_serial_port *port0;
 669         struct qt2_serial_private *serial_priv;
 670         int status;
 671
 672         port0 = serial->port[0];
 673
 674         serial_priv = usb_get_serial_data(serial);
 675         serial_priv->read_urb = usb_alloc_urb(0, GFP_KERNEL);
 676         if (!serial_priv->read_urb)
 677                 return -ENOMEM;
 678
 679         usb_fill_bulk_urb(serial_priv->read_urb, serial->dev,
 680                           usb_rcvbulkpipe(serial->dev,
 681                                           port0->bulk_in_endpointAddress),
 682                           serial_priv->read_buffer,
 683                           QT2_READ_BUFFER_SIZE,
 684                           qt2_read_bulk_callback, serial);
 685
 686         status = usb_submit_urb(serial_priv->read_urb, GFP_KERNEL);
 687         if (status != 0) {
 688                 dev_err(&serial->dev->dev,
 689                         "%s - submit read urb failed %i\n", __func__, status);
 690                 usb_free_urb(serial_priv->read_urb);
 691                 return status;
 692         }
 693
 694         return 0;
 695 }
 696
 697 static int qt2_attach(struct usb_serial *serial)
 698 {
 699         struct qt2_serial_private *serial_priv;
 700         int status;
 701
 702         /* power on unit */
 703         status = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0),
 704                                  0xc2, 0x40, 0x8000, 0, NULL, 0,
 705                                  QT2_USB_TIMEOUT);
 706         if (status < 0) {
 707                 dev_err(&serial->dev->dev,
 708                         "%s - failed to power on unit: %i\n", __func__, status);
 709                 return status;
 710         }
 711
 712         serial_priv = kzalloc(sizeof(*serial_priv), GFP_KERNEL);
 713         if (!serial_priv)
 714                 return -ENOMEM;
 715
 716         serial_priv->read_buffer = kmalloc(QT2_READ_BUFFER_SIZE, GFP_KERNEL);
 717         if (!serial_priv->read_buffer) {
 718                 status = -ENOMEM;
 719                 goto err_buf;
 720         }
 721
 722         usb_set_serial_data(serial, serial_priv);
 723
 724         status = qt2_setup_urbs(serial);
 725         if (status != 0)
 726                 goto attach_failed;
 727
 728         return 0;
 729
 730 attach_failed:
 731         kfree(serial_priv->read_buffer);
 732 err_buf:
 733         kfree(serial_priv);
 734         return status;
 735 }
 736
 737 static int qt2_port_probe(struct usb_serial_port *port)
 738 {
 739         struct usb_serial *serial = port->serial;
 740         struct qt2_port_private *port_priv;
 741         u8 bEndpointAddress;
 742
 743         port_priv = kzalloc(sizeof(*port_priv), GFP_KERNEL);
 744         if (!port_priv)
 745                 return -ENOMEM;
 746
 747         spin_lock_init(&port_priv->lock);
 748         spin_lock_init(&port_priv->urb_lock);
 749         port_priv->port = port;
 750
 751         port_priv->write_buffer = kmalloc(QT2_WRITE_BUFFER_SIZE, GFP_KERNEL);
 752         if (!port_priv->write_buffer)
 753                 goto err_buf;
 754
 755         port_priv->write_urb = usb_alloc_urb(0, GFP_KERNEL);
 756         if (!port_priv->write_urb)
 757                 goto err_urb;
 758
 759         bEndpointAddress = serial->port[0]->bulk_out_endpointAddress;
 760         usb_fill_bulk_urb(port_priv->write_urb, serial->dev,
 761                                 usb_sndbulkpipe(serial->dev, bEndpointAddress),
 762                                 port_priv->write_buffer,
 763                                 QT2_WRITE_BUFFER_SIZE,
 764                                 qt2_write_bulk_callback, port);
 765
 766         usb_set_serial_port_data(port, port_priv);
 767
 768         return 0;
 769 err_urb:
 770         kfree(port_priv->write_buffer);
 771 err_buf:
 772         kfree(port_priv);
 773         return -ENOMEM;
 774 }
 775
 776 static int qt2_port_remove(struct usb_serial_port *port)
 777 {
 778         struct qt2_port_private *port_priv;
 779
 780         port_priv = usb_get_serial_port_data(port);
 781         usb_free_urb(port_priv->write_urb);
 782         kfree(port_priv->write_buffer);
 783         kfree(port_priv);
 784
 785         return 0;
 786 }
 787
 788 static int qt2_tiocmget(struct tty_struct *tty)
 789 {
 790         struct usb_serial_port *port = tty->driver_data;
 791         struct usb_device *dev = port->serial->dev;
 792         struct qt2_port_private *port_priv = usb_get_serial_port_data(port);
 793         u8 *d;
 794         int r;
 795
 796         d = kzalloc(2, GFP_KERNEL);
 797         if (!d)
 798                 return -ENOMEM;
 799
 800         r = qt2_getregister(dev, port_priv->device_port, UART_MCR, d);
 801         if (r < 0)
 802                 goto mget_out;
 803
 804         r = qt2_getregister(dev, port_priv->device_port, UART_MSR, d + 1);
 805         if (r < 0)
 806                 goto mget_out;
 807
 808         r = (d[0] & UART_MCR_DTR ? TIOCM_DTR : 0) |
 809             (d[0] & UART_MCR_RTS ? TIOCM_RTS : 0) |
 810             (d[1] & UART_MSR_CTS ? TIOCM_CTS : 0) |
 811             (d[1] & UART_MSR_DCD ? TIOCM_CAR : 0) |
 812             (d[1] & UART_MSR_RI ? TIOCM_RI : 0) |
 813             (d[1] & UART_MSR_DSR ? TIOCM_DSR : 0);
 814
 815 mget_out:
 816         kfree(d);
 817         return r;
 818 }
 819
 820 static int qt2_tiocmset(struct tty_struct *tty,
 821                         unsigned int set, unsigned int clear)
 822 {
 823         struct qt2_port_private *port_priv;
 824
 825         port_priv = usb_get_serial_port_data(tty->driver_data);
 826         return update_mctrl(port_priv, set, clear);
 827 }
 828
 829 static void qt2_break_ctl(struct tty_struct *tty, int break_state)
 830 {
 831         struct usb_serial_port *port = tty->driver_data;
 832         struct qt2_port_private *port_priv;
 833         int status;
 834         u16 val;
 835
 836         port_priv = usb_get_serial_port_data(port);
 837
 838         val = (break_state == -1) ? 1 : 0;
 839
 840         status = qt2_control_msg(port->serial->dev, QT2_BREAK_CONTROL,
 841                                  val, port_priv->device_port);
 842         if (status < 0)
 843                 dev_warn(&port->dev,
 844                          "%s - failed to send control message: %i\n", __func__,
 845                          status);
 846 }
 847
 848
 849
 850 static void qt2_dtr_rts(struct usb_serial_port *port, int on)
 851 {
 852         struct usb_device *dev = port->serial->dev;
 853         struct qt2_port_private *port_priv = usb_get_serial_port_data(port);
 854
 855         /* Disable flow control */
 856         if (!on) {
 857                 if (qt2_setregister(dev, port_priv->device_port,
 858                                            UART_MCR, 0) < 0)
 859                         dev_warn(&port->dev, "error from flowcontrol urb\n");
 860         }
 861         /* drop RTS and DTR */
 862         if (on)
 863                 update_mctrl(port_priv, TIOCM_DTR | TIOCM_RTS, 0);
 864         else
 865                 update_mctrl(port_priv, 0, TIOCM_DTR | TIOCM_RTS);
 866 }
 867
 868 static void qt2_update_msr(struct usb_serial_port *port, unsigned char *ch)
 869 {
 870         struct qt2_port_private *port_priv;
 871         u8 newMSR = (u8) *ch;
 872         unsigned long flags;
 873
 874         port_priv = usb_get_serial_port_data(port);
 875
 876         spin_lock_irqsave(&port_priv->lock, flags);
 877         port_priv->shadowMSR = newMSR;
 878         spin_unlock_irqrestore(&port_priv->lock, flags);
 879
 880         if (newMSR & UART_MSR_ANY_DELTA) {
 881                 /* update input line counters */
 882                 if (newMSR & UART_MSR_DCTS)
 883                         port->icount.cts++;
 884                 if (newMSR & UART_MSR_DDSR)
 885                         port->icount.dsr++;
 886                 if (newMSR & UART_MSR_DDCD)
 887                         port->icount.dcd++;
 888                 if (newMSR & UART_MSR_TERI)
 889                         port->icount.rng++;
 890
 891                 wake_up_interruptible(&port->port.delta_msr_wait);
 892         }
 893 }
 894
 895 static void qt2_update_lsr(struct usb_serial_port *port, unsigned char *ch)
 896 {
 897         struct qt2_port_private *port_priv;
 898         struct async_icount *icount;
 899         unsigned long flags;
 900         u8 newLSR = (u8) *ch;
 901
 902         port_priv = usb_get_serial_port_data(port);
 903
 904         if (newLSR & UART_LSR_BI)
 905                 newLSR &= (u8) (UART_LSR_OE | UART_LSR_BI);
 906
 907         spin_lock_irqsave(&port_priv->lock, flags);
 908         port_priv->shadowLSR = newLSR;
 909         spin_unlock_irqrestore(&port_priv->lock, flags);
 910
 911         icount = &port->icount;
 912
 913         if (newLSR & UART_LSR_BRK_ERROR_BITS) {
 914
 915                 if (newLSR & UART_LSR_BI)
 916                         icount->brk++;
 917
 918                 if (newLSR & UART_LSR_OE)
 919                         icount->overrun++;
 920
 921                 if (newLSR & UART_LSR_PE)
 922                         icount->parity++;
 923
 924                 if (newLSR & UART_LSR_FE)
 925                         icount->frame++;
 926         }
 927
 928 }
 929
 930 static int qt2_write_room(struct tty_struct *tty)
 931 {
 932         struct usb_serial_port *port = tty->driver_data;
 933         struct qt2_port_private *port_priv;
 934         unsigned long flags = 0;
 935         int r;
 936
 937         port_priv = usb_get_serial_port_data(port);
 938
 939         spin_lock_irqsave(&port_priv->urb_lock, flags);
 940
 941         if (port_priv->urb_in_use)
 942                 r = 0;
 943         else
 944                 r = QT2_WRITE_BUFFER_SIZE - QT2_WRITE_CONTROL_SIZE;
 945
 946         spin_unlock_irqrestore(&port_priv->urb_lock, flags);
 947
 948         return r;
 949 }
 950
 951 static int qt2_write(struct tty_struct *tty,
 952                      struct usb_serial_port *port,
 953                      const unsigned char *buf, int count)
 954 {
 955         struct qt2_port_private *port_priv;
 956         struct urb *write_urb;
 957         unsigned char *data;
 958         unsigned long flags;
 959         int status;
 960         int bytes_out = 0;
 961
 962         port_priv = usb_get_serial_port_data(port);
 963
 964         if (port_priv->write_urb == NULL) {
 965                 dev_err(&port->dev, "%s - no output urb\n", __func__);
 966                 return 0;
 967         }
 968         write_urb = port_priv->write_urb;
 969
 970         count = min(count, QT2_WRITE_BUFFER_SIZE - QT2_WRITE_CONTROL_SIZE);
 971
 972         data = write_urb->transfer_buffer;
 973         spin_lock_irqsave(&port_priv->urb_lock, flags);
 974         if (port_priv->urb_in_use) {
 975                 dev_err(&port->dev, "qt2_write - urb is in use\n");
 976                 goto write_out;
 977         }
 978
 979         *data++ = QT2_CONTROL_BYTE;
 980         *data++ = QT2_CONTROL_BYTE;
 981         *data++ = port_priv->device_port;
 982         put_unaligned_le16(count, data);
 983         data += 2;
 984         memcpy(data, buf, count);
 985
 986         write_urb->transfer_buffer_length = count + QT2_WRITE_CONTROL_SIZE;
 987
 988         status = usb_submit_urb(write_urb, GFP_ATOMIC);
 989         if (status == 0) {
 990                 port_priv->urb_in_use = true;
 991                 bytes_out += count;
 992         }
 993
 994 write_out:
 995         spin_unlock_irqrestore(&port_priv->urb_lock, flags);
 996         return bytes_out;
 997 }
 998
 999
1000 static struct usb_serial_driver qt2_device = {
1001         .driver = {
1002                 .owner = THIS_MODULE,
1003                 .name = "quatech-serial",
1004         },
1005         .description         = DRIVER_DESC,
1006         .id_table            = id_table,
1007         .open                = qt2_open,
1008         .close               = qt2_close,
1009         .write               = qt2_write,
1010         .write_room          = qt2_write_room,
1011         .calc_num_ports      = qt2_calc_num_ports,
1012         .attach              = qt2_attach,
1013         .release             = qt2_release,
1014         .disconnect          = qt2_disconnect,
1015         .port_probe          = qt2_port_probe,
1016         .port_remove         = qt2_port_remove,
1017         .dtr_rts             = qt2_dtr_rts,
1018         .break_ctl           = qt2_break_ctl,
1019         .tiocmget            = qt2_tiocmget,
1020         .tiocmset            = qt2_tiocmset,
1021         .tiocmiwait          = usb_serial_generic_tiocmiwait,
1022         .get_icount          = usb_serial_generic_get_icount,
1023         .ioctl               = qt2_ioctl,
1024         .set_termios         = qt2_set_termios,
1025 };
1026
1027 static struct usb_serial_driver *const serial_drivers[] = {
1028         &qt2_device, NULL
1029 };
1030
1031 module_usb_serial_driver(serial_drivers, id_table);
1032
1033 MODULE_DESCRIPTION(DRIVER_DESC);
1034 MODULE_LICENSE("GPL");