drivers/usb/gadget/function/u_serial.c

   1 /*
   2  * u_serial.c - utilities for USB gadget "serial port"/TTY support
   3  *
   4  * Copyright (C) 2003 Al Borchers ([email protected])
   5  * Copyright (C) 2008 David Brownell
   6  * Copyright (C) 2008 by Nokia Corporation
   7  *
   8  * This code also borrows from usbserial.c, which is
   9  * Copyright (C) 1999 - 2002 Greg Kroah-Hartman ([email protected])
  10  * Copyright (C) 2000 Peter Berger ([email protected])
  11  * Copyright (C) 2000 Al Borchers ([email protected])
  12  *
  13  * This software is distributed under the terms of the GNU General
  14  * Public License ("GPL") as published by the Free Software Foundation,
  15  * either version 2 of that License or (at your option) any later version.
  16  */
  17
  18 /* #define VERBOSE_DEBUG */
  19
  20 #include <linux/kernel.h>
  21 #include <linux/sched.h>
  22 #include <linux/interrupt.h>
  23 #include <linux/device.h>
  24 #include <linux/delay.h>
  25 #include <linux/tty.h>
  26 #include <linux/tty_flip.h>
  27 #include <linux/slab.h>
  28 #include <linux/export.h>
  29 #include <linux/module.h>
  30 #include <linux/console.h>
  31 #include <linux/kthread.h>
  32
  33 #include "u_serial.h"
  34
  35
  36 /*
  37  * This component encapsulates the TTY layer glue needed to provide basic
  38  * "serial port" functionality through the USB gadget stack.  Each such
  39  * port is exposed through a /dev/ttyGS* node.
  40  *
  41  * After this module has been loaded, the individual TTY port can be requested
  42  * (gserial_alloc_line()) and it will stay available until they are removed
  43  * (gserial_free_line()). Each one may be connected to a USB function
  44  * (gserial_connect), or disconnected (with gserial_disconnect) when the USB
  45  * host issues a config change event. Data can only flow when the port is
  46  * connected to the host.
  47  *
  48  * A given TTY port can be made available in multiple configurations.
  49  * For example, each one might expose a ttyGS0 node which provides a
  50  * login application.  In one case that might use CDC ACM interface 0,
  51  * while another configuration might use interface 3 for that.  The
  52  * work to handle that (including descriptor management) is not part
  53  * of this component.
  54  *
  55  * Configurations may expose more than one TTY port.  For example, if
  56  * ttyGS0 provides login service, then ttyGS1 might provide dialer access
  57  * for a telephone or fax link.  And ttyGS2 might be something that just
  58  * needs a simple byte stream interface for some messaging protocol that
  59  * is managed in userspace ... OBEX, PTP, and MTP have been mentioned.
  60  *
  61  *
  62  * gserial is the lifecycle interface, used by USB functions
  63  * gs_port is the I/O nexus, used by the tty driver
  64  * tty_struct links to the tty/filesystem framework
  65  *
  66  * gserial <---> gs_port ... links will be null when the USB link is
  67  * inactive; managed by gserial_{connect,disconnect}().  each gserial
  68  * instance can wrap its own USB control protocol.
  69  *      gserial->ioport == usb_ep->driver_data ... gs_port
  70  *      gs_port->port_usb ... gserial
  71  *
  72  * gs_port <---> tty_struct ... links will be null when the TTY file
  73  * isn't opened; managed by gs_open()/gs_close()
  74  *      gserial->port_tty ... tty_struct
  75  *      tty_struct->driver_data ... gserial
  76  */
  77
  78 /* RX and TX queues can buffer QUEUE_SIZE packets before they hit the
  79  * next layer of buffering.  For TX that's a circular buffer; for RX
  80  * consider it a NOP.  A third layer is provided by the TTY code.
  81  */
  82 #define QUEUE_SIZE              16
  83 #define WRITE_BUF_SIZE          8192            /* TX only */
  84 #define GS_CONSOLE_BUF_SIZE     8192
  85
  86 /* circular buffer */
  87 struct gs_buf {
  88         unsigned                buf_size;
  89         char                    *buf_buf;
  90         char                    *buf_get;
  91         char                    *buf_put;
  92 };
  93
  94 /* console info */
  95 struct gscons_info {
  96         struct gs_port          *port;
  97         struct task_struct      *console_thread;
  98         struct gs_buf           con_buf;
  99         /* protect the buf and busy flag */
 100         spinlock_t              con_lock;
 101         int                     req_busy;
 102         struct usb_request      *console_req;
 103 };
 104
 105 /*
 106  * The port structure holds info for each port, one for each minor number
 107  * (and thus for each /dev/ node).
 108  */
 109 struct gs_port {
 110         struct tty_port         port;
 111         spinlock_t              port_lock;      /* guard port_* access */
 112
 113         struct gserial          *port_usb;
 114
 115         bool                    openclose;      /* open/close in progress */
 116         u8                      port_num;
 117
 118         struct list_head        read_pool;
 119         int read_started;
 120         int read_allocated;
 121         struct list_head        read_queue;
 122         unsigned                n_read;
 123         struct tasklet_struct   push;
 124
 125         struct list_head        write_pool;
 126         int write_started;
 127         int write_allocated;
 128         struct gs_buf           port_write_buf;
 129         wait_queue_head_t       drain_wait;     /* wait while writes drain */
 130         bool                    write_busy;
 131         wait_queue_head_t       close_wait;
 132
 133         /* REVISIT this state ... */
 134         struct usb_cdc_line_coding port_line_coding;    /* 8-N-1 etc */
 135 };
 136
 137 static struct portmaster {
 138         struct mutex    lock;                   /* protect open/close */
 139         struct gs_port  *port;
 140 } ports[MAX_U_SERIAL_PORTS];
 141
 142 #define GS_CLOSE_TIMEOUT                15              /* seconds */
 143
 144
 145
 146 #ifdef VERBOSE_DEBUG
 147 #ifndef pr_vdebug
 148 #define pr_vdebug(fmt, arg...) \
 149         pr_debug(fmt, ##arg)
 150 #endif /* pr_vdebug */
 151 #else
 152 #ifndef pr_vdebug
 153 #define pr_vdebug(fmt, arg...) \
 154         ({ if (0) pr_debug(fmt, ##arg); })
 155 #endif /* pr_vdebug */
 156 #endif
 157
 158 /*-------------------------------------------------------------------------*/
 159
 160 /* Circular Buffer */
 161
 162 /*
 163  * gs_buf_alloc
 164  *
 165  * Allocate a circular buffer and all associated memory.
 166  */
 167 static int gs_buf_alloc(struct gs_buf *gb, unsigned size)
 168 {
 169         gb->buf_buf = kmalloc(size, GFP_KERNEL);
 170         if (gb->buf_buf == NULL)
 171                 return -ENOMEM;
 172
 173         gb->buf_size = size;
 174         gb->buf_put = gb->buf_buf;
 175         gb->buf_get = gb->buf_buf;
 176
 177         return 0;
 178 }
 179
 180 /*
 181  * gs_buf_free
 182  *
 183  * Free the buffer and all associated memory.
 184  */
 185 static void gs_buf_free(struct gs_buf *gb)
 186 {
 187         kfree(gb->buf_buf);
 188         gb->buf_buf = NULL;
 189 }
 190
 191 /*
 192  * gs_buf_clear
 193  *
 194  * Clear out all data in the circular buffer.
 195  */
 196 static void gs_buf_clear(struct gs_buf *gb)
 197 {
 198         gb->buf_get = gb->buf_put;
 199         /* equivalent to a get of all data available */
 200 }
 201
 202 /*
 203  * gs_buf_data_avail
 204  *
 205  * Return the number of bytes of data written into the circular
 206  * buffer.
 207  */
 208 static unsigned gs_buf_data_avail(struct gs_buf *gb)
 209 {
 210         return (gb->buf_size + gb->buf_put - gb->buf_get) % gb->buf_size;
 211 }
 212
 213 /*
 214  * gs_buf_space_avail
 215  *
 216  * Return the number of bytes of space available in the circular
 217  * buffer.
 218  */
 219 static unsigned gs_buf_space_avail(struct gs_buf *gb)
 220 {
 221         return (gb->buf_size + gb->buf_get - gb->buf_put - 1) % gb->buf_size;
 222 }
 223
 224 /*
 225  * gs_buf_put
 226  *
 227  * Copy data data from a user buffer and put it into the circular buffer.
 228  * Restrict to the amount of space available.
 229  *
 230  * Return the number of bytes copied.
 231  */
 232 static unsigned
 233 gs_buf_put(struct gs_buf *gb, const char *buf, unsigned count)
 234 {
 235         unsigned len;
 236
 237         len  = gs_buf_space_avail(gb);
 238         if (count > len)
 239                 count = len;
 240
 241         if (count == 0)
 242                 return 0;
 243
 244         len = gb->buf_buf + gb->buf_size - gb->buf_put;
 245         if (count > len) {
 246                 memcpy(gb->buf_put, buf, len);
 247                 memcpy(gb->buf_buf, buf+len, count - len);
 248                 gb->buf_put = gb->buf_buf + count - len;
 249         } else {
 250                 memcpy(gb->buf_put, buf, count);
 251                 if (count < len)
 252                         gb->buf_put += count;
 253                 else /* count == len */
 254                         gb->buf_put = gb->buf_buf;
 255         }
 256
 257         return count;
 258 }
 259
 260 /*
 261  * gs_buf_get
 262  *
 263  * Get data from the circular buffer and copy to the given buffer.
 264  * Restrict to the amount of data available.
 265  *
 266  * Return the number of bytes copied.
 267  */
 268 static unsigned
 269 gs_buf_get(struct gs_buf *gb, char *buf, unsigned count)
 270 {
 271         unsigned len;
 272
 273         len = gs_buf_data_avail(gb);
 274         if (count > len)
 275                 count = len;
 276
 277         if (count == 0)
 278                 return 0;
 279
 280         len = gb->buf_buf + gb->buf_size - gb->buf_get;
 281         if (count > len) {
 282                 memcpy(buf, gb->buf_get, len);
 283                 memcpy(buf+len, gb->buf_buf, count - len);
 284                 gb->buf_get = gb->buf_buf + count - len;
 285         } else {
 286                 memcpy(buf, gb->buf_get, count);
 287                 if (count < len)
 288                         gb->buf_get += count;
 289                 else /* count == len */
 290                         gb->buf_get = gb->buf_buf;
 291         }
 292
 293         return count;
 294 }
 295
 296 /*-------------------------------------------------------------------------*/
 297
 298 /* I/O glue between TTY (upper) and USB function (lower) driver layers */
 299
 300 /*
 301  * gs_alloc_req
 302  *
 303  * Allocate a usb_request and its buffer.  Returns a pointer to the
 304  * usb_request or NULL if there is an error.
 305  */
 306 struct usb_request *
 307 gs_alloc_req(struct usb_ep *ep, unsigned len, gfp_t kmalloc_flags)
 308 {
 309         struct usb_request *req;
 310
 311         req = usb_ep_alloc_request(ep, kmalloc_flags);
 312
 313         if (req != NULL) {
 314                 req->length = len;
 315                 req->buf = kmalloc(len, kmalloc_flags);
 316                 if (req->buf == NULL) {
 317                         usb_ep_free_request(ep, req);
 318                         return NULL;
 319                 }
 320         }
 321
 322         return req;
 323 }
 324 EXPORT_SYMBOL_GPL(gs_alloc_req);
 325
 326 /*
 327  * gs_free_req
 328  *
 329  * Free a usb_request and its buffer.
 330  */
 331 void gs_free_req(struct usb_ep *ep, struct usb_request *req)
 332 {
 333         kfree(req->buf);
 334         usb_ep_free_request(ep, req);
 335 }
 336 EXPORT_SYMBOL_GPL(gs_free_req);
 337
 338 /*
 339  * gs_send_packet
 340  *
 341  * If there is data to send, a packet is built in the given
 342  * buffer and the size is returned.  If there is no data to
 343  * send, 0 is returned.
 344  *
 345  * Called with port_lock held.
 346  */
 347 static unsigned
 348 gs_send_packet(struct gs_port *port, char *packet, unsigned size)
 349 {
 350         unsigned len;
 351
 352         len = gs_buf_data_avail(&port->port_write_buf);
 353         if (len < size)
 354                 size = len;
 355         if (size != 0)
 356                 size = gs_buf_get(&port->port_write_buf, packet, size);
 357         return size;
 358 }
 359
 360 /*
 361  * gs_start_tx
 362  *
 363  * This function finds available write requests, calls
 364  * gs_send_packet to fill these packets with data, and
 365  * continues until either there are no more write requests
 366  * available or no more data to send.  This function is
 367  * run whenever data arrives or write requests are available.
 368  *
 369  * Context: caller owns port_lock; port_usb is non-null.
 370  */
 371 static int gs_start_tx(struct gs_port *port)
 372 /*
 373 __releases(&port->port_lock)
 374 __acquires(&port->port_lock)
 375 */
 376 {
 377         struct list_head        *pool = &port->write_pool;
 378         struct usb_ep           *in;
 379         int                     status = 0;
 380         bool                    do_tty_wake = false;
 381
 382         if (!port->port_usb)
 383                 return status;
 384
 385         in = port->port_usb->in;
 386
 387         while (!port->write_busy && !list_empty(pool)) {
 388                 struct usb_request      *req;
 389                 int                     len;
 390
 391                 if (port->write_started >= QUEUE_SIZE)
 392                         break;
 393
 394                 req = list_entry(pool->next, struct usb_request, list);
 395                 len = gs_send_packet(port, req->buf, in->maxpacket);
 396                 if (len == 0) {
 397                         wake_up_interruptible(&port->drain_wait);
 398                         break;
 399                 }
 400                 do_tty_wake = true;
 401
 402                 req->length = len;
 403                 list_del(&req->list);
 404                 req->zero = (gs_buf_data_avail(&port->port_write_buf) == 0);
 405
 406                 pr_vdebug("ttyGS%d: tx len=%d, 0x%02x 0x%02x 0x%02x ...\n",
 407                           port->port_num, len, *((u8 *)req->buf),
 408                           *((u8 *)req->buf+1), *((u8 *)req->buf+2));
 409
 410                 /* Drop lock while we call out of driver; completions
 411                  * could be issued while we do so.  Disconnection may
 412                  * happen too; maybe immediately before we queue this!
 413                  *
 414                  * NOTE that we may keep sending data for a while after
 415                  * the TTY closed (dev->ioport->port_tty is NULL).
 416                  */
 417                 port->write_busy = true;
 418                 spin_unlock(&port->port_lock);
 419                 status = usb_ep_queue(in, req, GFP_ATOMIC);
 420                 spin_lock(&port->port_lock);
 421                 port->write_busy = false;
 422
 423                 if (status) {
 424                         pr_debug("%s: %s %s err %d\n",
 425                                         __func__, "queue", in->name, status);
 426                         list_add(&req->list, pool);
 427                         break;
 428                 }
 429
 430                 port->write_started++;
 431
 432                 /* abort immediately after disconnect */
 433                 if (!port->port_usb)
 434                         break;
 435         }
 436
 437         if (do_tty_wake && port->port.tty)
 438                 tty_wakeup(port->port.tty);
 439         return status;
 440 }
 441
 442 /*
 443  * Context: caller owns port_lock, and port_usb is set
 444  */
 445 static unsigned gs_start_rx(struct gs_port *port)
 446 /*
 447 __releases(&port->port_lock)
 448 __acquires(&port->port_lock)
 449 */
 450 {
 451         struct list_head        *pool = &port->read_pool;
 452         struct usb_ep           *out = port->port_usb->out;
 453
 454         while (!list_empty(pool)) {
 455                 struct usb_request      *req;
 456                 int                     status;
 457                 struct tty_struct       *tty;
 458
 459                 /* no more rx if closed */
 460                 tty = port->port.tty;
 461                 if (!tty)
 462                         break;
 463
 464                 if (port->read_started >= QUEUE_SIZE)
 465                         break;
 466
 467                 req = list_entry(pool->next, struct usb_request, list);
 468                 list_del(&req->list);
 469                 req->length = out->maxpacket;
 470
 471                 /* drop lock while we call out; the controller driver
 472                  * may need to call us back (e.g. for disconnect)
 473                  */
 474                 spin_unlock(&port->port_lock);
 475                 status = usb_ep_queue(out, req, GFP_ATOMIC);
 476                 spin_lock(&port->port_lock);
 477
 478                 if (status) {
 479                         pr_debug("%s: %s %s err %d\n",
 480                                         __func__, "queue", out->name, status);
 481                         list_add(&req->list, pool);
 482                         break;
 483                 }
 484                 port->read_started++;
 485
 486                 /* abort immediately after disconnect */
 487                 if (!port->port_usb)
 488                         break;
 489         }
 490         return port->read_started;
 491 }
 492
 493 /*
 494  * RX tasklet takes data out of the RX queue and hands it up to the TTY
 495  * layer until it refuses to take any more data (or is throttled back).
 496  * Then it issues reads for any further data.
 497  *
 498  * If the RX queue becomes full enough that no usb_request is queued,
 499  * the OUT endpoint may begin NAKing as soon as its FIFO fills up.
 500  * So QUEUE_SIZE packets plus however many the FIFO holds (usually two)
 501  * can be buffered before the TTY layer's buffers (currently 64 KB).
 502  */
 503 static void gs_rx_push(unsigned long _port)
 504 {
 505         struct gs_port          *port = (void *)_port;
 506         struct tty_struct       *tty;
 507         struct list_head        *queue = &port->read_queue;
 508         bool                    disconnect = false;
 509         bool                    do_push = false;
 510
 511         /* hand any queued data to the tty */
 512         spin_lock_irq(&port->port_lock);
 513         tty = port->port.tty;
 514         while (!list_empty(queue)) {
 515                 struct usb_request      *req;
 516
 517                 req = list_first_entry(queue, struct usb_request, list);
 518
 519                 /* leave data queued if tty was rx throttled */
 520                 if (tty && tty_throttled(tty))
 521                         break;
 522
 523                 switch (req->status) {
 524                 case -ESHUTDOWN:
 525                         disconnect = true;
 526                         pr_vdebug("ttyGS%d: shutdown\n", port->port_num);
 527                         break;
 528
 529                 default:
 530                         /* presumably a transient fault */
 531                         pr_warn("ttyGS%d: unexpected RX status %d\n",
 532                                 port->port_num, req->status);
 533                         /* FALLTHROUGH */
 534                 case 0:
 535                         /* normal completion */
 536                         break;
 537                 }
 538
 539                 /* push data to (open) tty */
 540                 if (req->actual) {
 541                         char            *packet = req->buf;
 542                         unsigned        size = req->actual;
 543                         unsigned        n;
 544                         int             count;
 545
 546                         /* we may have pushed part of this packet already... */
 547                         n = port->n_read;
 548                         if (n) {
 549                                 packet += n;
 550                                 size -= n;
 551                         }
 552
 553                         count = tty_insert_flip_string(&port->port, packet,
 554                                         size);
 555                         if (count)
 556                                 do_push = true;
 557                         if (count != size) {
 558                                 /* stop pushing; TTY layer can't handle more */
 559                                 port->n_read += count;
 560                                 pr_vdebug("ttyGS%d: rx block %d/%d\n",
 561                                           port->port_num, count, req->actual);
 562                                 break;
 563                         }
 564                         port->n_read = 0;
 565                 }
 566
 567                 list_move(&req->list, &port->read_pool);
 568                 port->read_started--;
 569         }
 570
 571         /* Push from tty to ldisc; this is handled by a workqueue,
 572          * so we won't get callbacks and can hold port_lock
 573          */
 574         if (do_push)
 575                 tty_flip_buffer_push(&port->port);
 576
 577
 578         /* We want our data queue to become empty ASAP, keeping data
 579          * in the tty and ldisc (not here).  If we couldn't push any
 580          * this time around, there may be trouble unless there's an
 581          * implicit tty_unthrottle() call on its way...
 582          *
 583          * REVISIT we should probably add a timer to keep the tasklet
 584          * from starving ... but it's not clear that case ever happens.
 585          */
 586         if (!list_empty(queue) && tty) {
 587                 if (!tty_throttled(tty)) {
 588                         if (do_push)
 589                                 tasklet_schedule(&port->push);
 590                         else
 591                                 pr_warn("ttyGS%d: RX not scheduled?\n",
 592                                         port->port_num);
 593                 }
 594         }
 595
 596         /* If we're still connected, refill the USB RX queue. */
 597         if (!disconnect && port->port_usb)
 598                 gs_start_rx(port);
 599
 600         spin_unlock_irq(&port->port_lock);
 601 }
 602
 603 static void gs_read_complete(struct usb_ep *ep, struct usb_request *req)
 604 {
 605         struct gs_port  *port = ep->driver_data;
 606
 607         /* Queue all received data until the tty layer is ready for it. */
 608         spin_lock(&port->port_lock);
 609         list_add_tail(&req->list, &port->read_queue);
 610         tasklet_schedule(&port->push);
 611         spin_unlock(&port->port_lock);
 612 }
 613
 614 static void gs_write_complete(struct usb_ep *ep, struct usb_request *req)
 615 {
 616         struct gs_port  *port = ep->driver_data;
 617
 618         spin_lock(&port->port_lock);
 619         list_add(&req->list, &port->write_pool);
 620         port->write_started--;
 621
 622         switch (req->status) {
 623         default:
 624                 /* presumably a transient fault */
 625                 pr_warn("%s: unexpected %s status %d\n",
 626                         __func__, ep->name, req->status);
 627                 /* FALL THROUGH */
 628         case 0:
 629                 /* normal completion */
 630                 gs_start_tx(port);
 631                 break;
 632
 633         case -ESHUTDOWN:
 634                 /* disconnect */
 635                 pr_vdebug("%s: %s shutdown\n", __func__, ep->name);
 636                 break;
 637         }
 638
 639         spin_unlock(&port->port_lock);
 640 }
 641
 642 static void gs_free_requests(struct usb_ep *ep, struct list_head *head,
 643                                                          int *allocated)
 644 {
 645         struct usb_request      *req;
 646
 647         while (!list_empty(head)) {
 648                 req = list_entry(head->next, struct usb_request, list);
 649                 list_del(&req->list);
 650                 gs_free_req(ep, req);
 651                 if (allocated)
 652                         (*allocated)--;
 653         }
 654 }
 655
 656 static int gs_alloc_requests(struct usb_ep *ep, struct list_head *head,
 657                 void (*fn)(struct usb_ep *, struct usb_request *),
 658                 int *allocated)
 659 {
 660         int                     i;
 661         struct usb_request      *req;
 662         int n = allocated ? QUEUE_SIZE - *allocated : QUEUE_SIZE;
 663
 664         /* Pre-allocate up to QUEUE_SIZE transfers, but if we can't
 665          * do quite that many this time, don't fail ... we just won't
 666          * be as speedy as we might otherwise be.
 667          */
 668         for (i = 0; i < n; i++) {
 669                 req = gs_alloc_req(ep, ep->maxpacket, GFP_ATOMIC);
 670                 if (!req)
 671                         return list_empty(head) ? -ENOMEM : 0;
 672                 req->complete = fn;
 673                 list_add_tail(&req->list, head);
 674                 if (allocated)
 675                         (*allocated)++;
 676         }
 677         return 0;
 678 }
 679
 680 /**
 681  * gs_start_io - start USB I/O streams
 682  * @dev: encapsulates endpoints to use
 683  * Context: holding port_lock; port_tty and port_usb are non-null
 684  *
 685  * We only start I/O when something is connected to both sides of
 686  * this port.  If nothing is listening on the host side, we may
 687  * be pointlessly filling up our TX buffers and FIFO.
 688  */
 689 static int gs_start_io(struct gs_port *port)
 690 {
 691         struct list_head        *head = &port->read_pool;
 692         struct usb_ep           *ep = port->port_usb->out;
 693         int                     status;
 694         unsigned                started;
 695
 696         /* Allocate RX and TX I/O buffers.  We can't easily do this much
 697          * earlier (with GFP_KERNEL) because the requests are coupled to
 698          * endpoints, as are the packet sizes we'll be using.  Different
 699          * configurations may use different endpoints with a given port;
 700          * and high speed vs full speed changes packet sizes too.
 701          */
 702         status = gs_alloc_requests(ep, head, gs_read_complete,
 703                 &port->read_allocated);
 704         if (status)
 705                 return status;
 706
 707         status = gs_alloc_requests(port->port_usb->in, &port->write_pool,
 708                         gs_write_complete, &port->write_allocated);
 709         if (status) {
 710                 gs_free_requests(ep, head, &port->read_allocated);
 711                 return status;
 712         }
 713
 714         /* queue read requests */
 715         port->n_read = 0;
 716         started = gs_start_rx(port);
 717
 718         /* unblock any pending writes into our circular buffer */
 719         if (started) {
 720                 tty_wakeup(port->port.tty);
 721         } else {
 722                 gs_free_requests(ep, head, &port->read_allocated);
 723                 gs_free_requests(port->port_usb->in, &port->write_pool,
 724                         &port->write_allocated);
 725                 status = -EIO;
 726         }
 727
 728         return status;
 729 }
 730
 731 /*-------------------------------------------------------------------------*/
 732
 733 /* TTY Driver */
 734
 735 /*
 736  * gs_open sets up the link between a gs_port and its associated TTY.
 737  * That link is broken *only* by TTY close(), and all driver methods
 738  * know that.
 739  */
 740 static int gs_open(struct tty_struct *tty, struct file *file)
 741 {
 742         int             port_num = tty->index;
 743         struct gs_port  *port;
 744         int             status;
 745
 746         do {
 747                 mutex_lock(&ports[port_num].lock);
 748                 port = ports[port_num].port;
 749                 if (!port)
 750                         status = -ENODEV;
 751                 else {
 752                         spin_lock_irq(&port->port_lock);
 753
 754                         /* already open?  Great. */
 755                         if (port->port.count) {
 756                                 status = 0;
 757                                 port->port.count++;
 758
 759                         /* currently opening/closing? wait ... */
 760                         } else if (port->openclose) {
 761                                 status = -EBUSY;
 762
 763                         /* ... else we do the work */
 764                         } else {
 765                                 status = -EAGAIN;
 766                                 port->openclose = true;
 767                         }
 768                         spin_unlock_irq(&port->port_lock);
 769                 }
 770                 mutex_unlock(&ports[port_num].lock);
 771
 772                 switch (status) {
 773                 default:
 774                         /* fully handled */
 775                         return status;
 776                 case -EAGAIN:
 777                         /* must do the work */
 778                         break;
 779                 case -EBUSY:
 780                         /* wait for EAGAIN task to finish */
 781                         msleep(1);
 782                         /* REVISIT could have a waitchannel here, if
 783                          * concurrent open performance is important
 784                          */
 785                         break;
 786                 }
 787         } while (status != -EAGAIN);
 788
 789         /* Do the "real open" */
 790         spin_lock_irq(&port->port_lock);
 791
 792         /* allocate circular buffer on first open */
 793         if (port->port_write_buf.buf_buf == NULL) {
 794
 795                 spin_unlock_irq(&port->port_lock);
 796                 status = gs_buf_alloc(&port->port_write_buf, WRITE_BUF_SIZE);
 797                 spin_lock_irq(&port->port_lock);
 798
 799                 if (status) {
 800                         pr_debug("gs_open: ttyGS%d (%p,%p) no buffer\n",
 801                                 port->port_num, tty, file);
 802                         port->openclose = false;
 803                         goto exit_unlock_port;
 804                 }
 805         }
 806
 807         /* REVISIT if REMOVED (ports[].port NULL), abort the open
 808          * to let rmmod work faster (but this way isn't wrong).
 809          */
 810
 811         /* REVISIT maybe wait for "carrier detect" */
 812
 813         tty->driver_data = port;
 814         port->port.tty = tty;
 815
 816         port->port.count = 1;
 817         port->openclose = false;
 818
 819         /* if connected, start the I/O stream */
 820         if (port->port_usb) {
 821                 struct gserial  *gser = port->port_usb;
 822
 823                 pr_debug("gs_open: start ttyGS%d\n", port->port_num);
 824                 gs_start_io(port);
 825
 826                 if (gser->connect)
 827                         gser->connect(gser);
 828         }
 829
 830         pr_debug("gs_open: ttyGS%d (%p,%p)\n", port->port_num, tty, file);
 831
 832         status = 0;
 833
 834 exit_unlock_port:
 835         spin_unlock_irq(&port->port_lock);
 836         return status;
 837 }
 838
 839 static int gs_writes_finished(struct gs_port *p)
 840 {
 841         int cond;
 842
 843         /* return true on disconnect or empty buffer */
 844         spin_lock_irq(&p->port_lock);
 845         cond = (p->port_usb == NULL) || !gs_buf_data_avail(&p->port_write_buf);
 846         spin_unlock_irq(&p->port_lock);
 847
 848         return cond;
 849 }
 850
 851 static void gs_close(struct tty_struct *tty, struct file *file)
 852 {
 853         struct gs_port *port = tty->driver_data;
 854         struct gserial  *gser;
 855
 856         spin_lock_irq(&port->port_lock);
 857
 858         if (port->port.count != 1) {
 859                 if (port->port.count == 0)
 860                         WARN_ON(1);
 861                 else
 862                         --port->port.count;
 863                 goto exit;
 864         }
 865
 866         pr_debug("gs_close: ttyGS%d (%p,%p) ...\n", port->port_num, tty, file);
 867
 868         /* mark port as closing but in use; we can drop port lock
 869          * and sleep if necessary
 870          */
 871         port->openclose = true;
 872         port->port.count = 0;
 873
 874         gser = port->port_usb;
 875         if (gser && gser->disconnect)
 876                 gser->disconnect(gser);
 877
 878         /* wait for circular write buffer to drain, disconnect, or at
 879          * most GS_CLOSE_TIMEOUT seconds; then discard the rest
 880          */
 881         if (gs_buf_data_avail(&port->port_write_buf) > 0 && gser) {
 882                 spin_unlock_irq(&port->port_lock);
 883                 wait_event_interruptible_timeout(port->drain_wait,
 884                                         gs_writes_finished(port),
 885                                         GS_CLOSE_TIMEOUT * HZ);
 886                 spin_lock_irq(&port->port_lock);
 887                 gser = port->port_usb;
 888         }
 889
 890         /* Iff we're disconnected, there can be no I/O in flight so it's
 891          * ok to free the circular buffer; else just scrub it.  And don't
 892          * let the push tasklet fire again until we're re-opened.
 893          */
 894         if (gser == NULL)
 895                 gs_buf_free(&port->port_write_buf);
 896         else
 897                 gs_buf_clear(&port->port_write_buf);
 898
 899         port->port.tty = NULL;
 900
 901         port->openclose = false;
 902
 903         pr_debug("gs_close: ttyGS%d (%p,%p) done!\n",
 904                         port->port_num, tty, file);
 905
 906         wake_up(&port->close_wait);
 907 exit:
 908         spin_unlock_irq(&port->port_lock);
 909 }
 910
 911 static int gs_write(struct tty_struct *tty, const unsigned char *buf, int count)
 912 {
 913         struct gs_port  *port = tty->driver_data;
 914         unsigned long   flags;
 915
 916         pr_vdebug("gs_write: ttyGS%d (%p) writing %d bytes\n",
 917                         port->port_num, tty, count);
 918
 919         spin_lock_irqsave(&port->port_lock, flags);
 920         if (count)
 921                 count = gs_buf_put(&port->port_write_buf, buf, count);
 922         /* treat count == 0 as flush_chars() */
 923         if (port->port_usb)
 924                 gs_start_tx(port);
 925         spin_unlock_irqrestore(&port->port_lock, flags);
 926
 927         return count;
 928 }
 929
 930 static int gs_put_char(struct tty_struct *tty, unsigned char ch)
 931 {
 932         struct gs_port  *port = tty->driver_data;
 933         unsigned long   flags;
 934         int             status;
 935
 936         pr_vdebug("gs_put_char: (%d,%p) char=0x%x, called from %ps\n",
 937                 port->port_num, tty, ch, __builtin_return_address(0));
 938
 939         spin_lock_irqsave(&port->port_lock, flags);
 940         status = gs_buf_put(&port->port_write_buf, &ch, 1);
 941         spin_unlock_irqrestore(&port->port_lock, flags);
 942
 943         return status;
 944 }
 945
 946 static void gs_flush_chars(struct tty_struct *tty)
 947 {
 948         struct gs_port  *port = tty->driver_data;
 949         unsigned long   flags;
 950
 951         pr_vdebug("gs_flush_chars: (%d,%p)\n", port->port_num, tty);
 952
 953         spin_lock_irqsave(&port->port_lock, flags);
 954         if (port->port_usb)
 955                 gs_start_tx(port);
 956         spin_unlock_irqrestore(&port->port_lock, flags);
 957 }
 958
 959 static int gs_write_room(struct tty_struct *tty)
 960 {
 961         struct gs_port  *port = tty->driver_data;
 962         unsigned long   flags;
 963         int             room = 0;
 964
 965         spin_lock_irqsave(&port->port_lock, flags);
 966         if (port->port_usb)
 967                 room = gs_buf_space_avail(&port->port_write_buf);
 968         spin_unlock_irqrestore(&port->port_lock, flags);
 969
 970         pr_vdebug("gs_write_room: (%d,%p) room=%d\n",
 971                 port->port_num, tty, room);
 972
 973         return room;
 974 }
 975
 976 static int gs_chars_in_buffer(struct tty_struct *tty)
 977 {
 978         struct gs_port  *port = tty->driver_data;
 979         unsigned long   flags;
 980         int             chars = 0;
 981
 982         spin_lock_irqsave(&port->port_lock, flags);
 983         chars = gs_buf_data_avail(&port->port_write_buf);
 984         spin_unlock_irqrestore(&port->port_lock, flags);
 985
 986         pr_vdebug("gs_chars_in_buffer: (%d,%p) chars=%d\n",
 987                 port->port_num, tty, chars);
 988
 989         return chars;
 990 }
 991
 992 /* undo side effects of setting TTY_THROTTLED */
 993 static void gs_unthrottle(struct tty_struct *tty)
 994 {
 995         struct gs_port          *port = tty->driver_data;
 996         unsigned long           flags;
 997
 998         spin_lock_irqsave(&port->port_lock, flags);
 999         if (port->port_usb) {
1000                 /* Kickstart read queue processing.  We don't do xon/xoff,
1001                  * rts/cts, or other handshaking with the host, but if the
1002                  * read queue backs up enough we'll be NAKing OUT packets.
1003                  */
1004                 tasklet_schedule(&port->push);
1005                 pr_vdebug("ttyGS%d: unthrottle\n", port->port_num);
1006         }
1007         spin_unlock_irqrestore(&port->port_lock, flags);
1008 }
1009
1010 static int gs_break_ctl(struct tty_struct *tty, int duration)
1011 {
1012         struct gs_port  *port = tty->driver_data;
1013         int             status = 0;
1014         struct gserial  *gser;
1015
1016         pr_vdebug("gs_break_ctl: ttyGS%d, send break (%d) \n",
1017                         port->port_num, duration);
1018
1019         spin_lock_irq(&port->port_lock);
1020         gser = port->port_usb;
1021         if (gser && gser->send_break)
1022                 status = gser->send_break(gser, duration);
1023         spin_unlock_irq(&port->port_lock);
1024
1025         return status;
1026 }
1027
1028 static const struct tty_operations gs_tty_ops = {
1029         .open =                 gs_open,
1030         .close =                gs_close,
1031         .write =                gs_write,
1032         .put_char =             gs_put_char,
1033         .flush_chars =          gs_flush_chars,
1034         .write_room =           gs_write_room,
1035         .chars_in_buffer =      gs_chars_in_buffer,
1036         .unthrottle =           gs_unthrottle,
1037         .break_ctl =            gs_break_ctl,
1038 };
1039
1040 /*-------------------------------------------------------------------------*/
1041
1042 static struct tty_driver *gs_tty_driver;
1043
1044 #ifdef CONFIG_U_SERIAL_CONSOLE
1045
1046 static struct gscons_info gscons_info;
1047 static struct console gserial_cons;
1048
1049 static struct usb_request *gs_request_new(struct usb_ep *ep)
1050 {
1051         struct usb_request *req = usb_ep_alloc_request(ep, GFP_ATOMIC);
1052         if (!req)
1053                 return NULL;
1054
1055         req->buf = kmalloc(ep->maxpacket, GFP_ATOMIC);
1056         if (!req->buf) {
1057                 usb_ep_free_request(ep, req);
1058                 return NULL;
1059         }
1060
1061         return req;
1062 }
1063
1064 static void gs_request_free(struct usb_request *req, struct usb_ep *ep)
1065 {
1066         if (!req)
1067                 return;
1068
1069         kfree(req->buf);
1070         usb_ep_free_request(ep, req);
1071 }
1072
1073 static void gs_complete_out(struct usb_ep *ep, struct usb_request *req)
1074 {
1075         struct gscons_info *info = &gscons_info;
1076
1077         switch (req->status) {
1078         default:
1079                 pr_warn("%s: unexpected %s status %d\n",
1080                         __func__, ep->name, req->status);
1081         case 0:
1082                 /* normal completion */
1083                 spin_lock(&info->con_lock);
1084                 info->req_busy = 0;
1085                 spin_unlock(&info->con_lock);
1086
1087                 wake_up_process(info->console_thread);
1088                 break;
1089         case -ESHUTDOWN:
1090                 /* disconnect */
1091                 pr_vdebug("%s: %s shutdown\n", __func__, ep->name);
1092                 break;
1093         }
1094 }
1095
1096 static int gs_console_connect(int port_num)
1097 {
1098         struct gscons_info *info = &gscons_info;
1099         struct gs_port *port;
1100         struct usb_ep *ep;
1101
1102         if (port_num != gserial_cons.index) {
1103                 pr_err("%s: port num [%d] is not support console\n",
1104                        __func__, port_num);
1105                 return -ENXIO;
1106         }
1107
1108         port = ports[port_num].port;
1109         ep = port->port_usb->in;
1110         if (!info->console_req) {
1111                 info->console_req = gs_request_new(ep);
1112                 if (!info->console_req)
1113                         return -ENOMEM;
1114                 info->console_req->complete = gs_complete_out;
1115         }
1116
1117         info->port = port;
1118         spin_lock(&info->con_lock);
1119         info->req_busy = 0;
1120         spin_unlock(&info->con_lock);
1121         pr_vdebug("port[%d] console connect!\n", port_num);
1122         return 0;
1123 }
1124
1125 static void gs_console_disconnect(struct usb_ep *ep)
1126 {
1127         struct gscons_info *info = &gscons_info;
1128         struct usb_request *req = info->console_req;
1129
1130         gs_request_free(req, ep);
1131         info->console_req = NULL;
1132 }
1133
1134 static int gs_console_thread(void *data)
1135 {
1136         struct gscons_info *info = &gscons_info;
1137         struct gs_port *port;
1138         struct usb_request *req;
1139         struct usb_ep *ep;
1140         int xfer, ret, count, size;
1141
1142         do {
1143                 port = info->port;
1144                 set_current_state(TASK_INTERRUPTIBLE);
1145                 if (!port || !port->port_usb
1146                     || !port->port_usb->in || !info->console_req)
1147                         goto sched;
1148
1149                 req = info->console_req;
1150                 ep = port->port_usb->in;
1151
1152                 spin_lock_irq(&info->con_lock);
1153                 count = gs_buf_data_avail(&info->con_buf);
1154                 size = ep->maxpacket;
1155
1156                 if (count > 0 && !info->req_busy) {
1157                         set_current_state(TASK_RUNNING);
1158                         if (count < size)
1159                                 size = count;
1160
1161                         xfer = gs_buf_get(&info->con_buf, req->buf, size);
1162                         req->length = xfer;
1163
1164                         spin_unlock(&info->con_lock);
1165                         ret = usb_ep_queue(ep, req, GFP_ATOMIC);
1166                         spin_lock(&info->con_lock);
1167                         if (ret < 0)
1168                                 info->req_busy = 0;
1169                         else
1170                                 info->req_busy = 1;
1171
1172                         spin_unlock_irq(&info->con_lock);
1173                 } else {
1174                         spin_unlock_irq(&info->con_lock);
1175 sched:
1176                         if (kthread_should_stop()) {
1177                                 set_current_state(TASK_RUNNING);
1178                                 break;
1179                         }
1180                         schedule();
1181                 }
1182         } while (1);
1183
1184         return 0;
1185 }
1186
1187 static int gs_console_setup(struct console *co, char *options)
1188 {
1189         struct gscons_info *info = &gscons_info;
1190         int status;
1191
1192         info->port = NULL;
1193         info->console_req = NULL;
1194         info->req_busy = 0;
1195         spin_lock_init(&info->con_lock);
1196
1197         status = gs_buf_alloc(&info->con_buf, GS_CONSOLE_BUF_SIZE);
1198         if (status) {
1199                 pr_err("%s: allocate console buffer failed\n", __func__);
1200                 return status;
1201         }
1202
1203         info->console_thread = kthread_create(gs_console_thread,
1204                                               co, "gs_console");
1205         if (IS_ERR(info->console_thread)) {
1206                 pr_err("%s: cannot create console thread\n", __func__);
1207                 gs_buf_free(&info->con_buf);
1208                 return PTR_ERR(info->console_thread);
1209         }
1210         wake_up_process(info->console_thread);
1211
1212         return 0;
1213 }
1214
1215 static void gs_console_write(struct console *co,
1216                              const char *buf, unsigned count)
1217 {
1218         struct gscons_info *info = &gscons_info;
1219         unsigned long flags;
1220
1221         spin_lock_irqsave(&info->con_lock, flags);
1222         gs_buf_put(&info->con_buf, buf, count);
1223         spin_unlock_irqrestore(&info->con_lock, flags);
1224
1225         wake_up_process(info->console_thread);
1226 }
1227
1228 static struct tty_driver *gs_console_device(struct console *co, int *index)
1229 {
1230         struct tty_driver **p = (struct tty_driver **)co->data;
1231
1232         if (!*p)
1233                 return NULL;
1234
1235         *index = co->index;
1236         return *p;
1237 }
1238
1239 static struct console gserial_cons = {
1240         .name =         "ttyGS",
1241         .write =        gs_console_write,
1242         .device =       gs_console_device,
1243         .setup =        gs_console_setup,
1244         .flags =        CON_PRINTBUFFER,
1245         .index =        -1,
1246         .data =         &gs_tty_driver,
1247 };
1248
1249 static void gserial_console_init(void)
1250 {
1251         register_console(&gserial_cons);
1252 }
1253
1254 static void gserial_console_exit(void)
1255 {
1256         struct gscons_info *info = &gscons_info;
1257
1258         unregister_console(&gserial_cons);
1259         if (info->console_thread != NULL)
1260                 kthread_stop(info->console_thread);
1261         gs_buf_free(&info->con_buf);
1262 }
1263
1264 #else
1265
1266 static int gs_console_connect(int port_num)
1267 {
1268         return 0;
1269 }
1270
1271 static void gs_console_disconnect(struct usb_ep *ep)
1272 {
1273 }
1274
1275 static void gserial_console_init(void)
1276 {
1277 }
1278
1279 static void gserial_console_exit(void)
1280 {
1281 }
1282
1283 #endif
1284
1285 static int
1286 gs_port_alloc(unsigned port_num, struct usb_cdc_line_coding *coding)
1287 {
1288         struct gs_port  *port;
1289         int             ret = 0;
1290
1291         mutex_lock(&ports[port_num].lock);
1292         if (ports[port_num].port) {
1293                 ret = -EBUSY;
1294                 goto out;
1295         }
1296
1297         port = kzalloc(sizeof(struct gs_port), GFP_KERNEL);
1298         if (port == NULL) {
1299                 ret = -ENOMEM;
1300                 goto out;
1301         }
1302
1303         tty_port_init(&port->port);
1304         spin_lock_init(&port->port_lock);
1305         init_waitqueue_head(&port->drain_wait);
1306         init_waitqueue_head(&port->close_wait);
1307
1308         tasklet_init(&port->push, gs_rx_push, (unsigned long) port);
1309
1310         INIT_LIST_HEAD(&port->read_pool);
1311         INIT_LIST_HEAD(&port->read_queue);
1312         INIT_LIST_HEAD(&port->write_pool);
1313
1314         port->port_num = port_num;
1315         port->port_line_coding = *coding;
1316
1317         ports[port_num].port = port;
1318 out:
1319         mutex_unlock(&ports[port_num].lock);
1320         return ret;
1321 }
1322
1323 static int gs_closed(struct gs_port *port)
1324 {
1325         int cond;
1326
1327         spin_lock_irq(&port->port_lock);
1328         cond = (port->port.count == 0) && !port->openclose;
1329         spin_unlock_irq(&port->port_lock);
1330         return cond;
1331 }
1332
1333 static void gserial_free_port(struct gs_port *port)
1334 {
1335         tasklet_kill(&port->push);
1336         /* wait for old opens to finish */
1337         wait_event(port->close_wait, gs_closed(port));
1338         WARN_ON(port->port_usb != NULL);
1339         tty_port_destroy(&port->port);
1340         kfree(port);
1341 }
1342
1343 void gserial_free_line(unsigned char port_num)
1344 {
1345         struct gs_port  *port;
1346
1347         mutex_lock(&ports[port_num].lock);
1348         if (WARN_ON(!ports[port_num].port)) {
1349                 mutex_unlock(&ports[port_num].lock);
1350                 return;
1351         }
1352         port = ports[port_num].port;
1353         ports[port_num].port = NULL;
1354         mutex_unlock(&ports[port_num].lock);
1355
1356         gserial_free_port(port);
1357         tty_unregister_device(gs_tty_driver, port_num);
1358         gserial_console_exit();
1359 }
1360 EXPORT_SYMBOL_GPL(gserial_free_line);
1361
1362 int gserial_alloc_line(unsigned char *line_num)
1363 {
1364         struct usb_cdc_line_coding      coding;
1365         struct device                   *tty_dev;
1366         int                             ret;
1367         int                             port_num;
1368
1369         coding.dwDTERate = cpu_to_le32(9600);
1370         coding.bCharFormat = 8;
1371         coding.bParityType = USB_CDC_NO_PARITY;
1372         coding.bDataBits = USB_CDC_1_STOP_BITS;
1373
1374         for (port_num = 0; port_num < MAX_U_SERIAL_PORTS; port_num++) {
1375                 ret = gs_port_alloc(port_num, &coding);
1376                 if (ret == -EBUSY)
1377                         continue;
1378                 if (ret)
1379                         return ret;
1380                 break;
1381         }
1382         if (ret)
1383                 return ret;
1384
1385         /* ... and sysfs class devices, so mdev/udev make /dev/ttyGS* */
1386
1387         tty_dev = tty_port_register_device(&ports[port_num].port->port,
1388                         gs_tty_driver, port_num, NULL);
1389         if (IS_ERR(tty_dev)) {
1390                 struct gs_port  *port;
1391                 pr_err("%s: failed to register tty for port %d, err %ld\n",
1392                                 __func__, port_num, PTR_ERR(tty_dev));
1393
1394                 ret = PTR_ERR(tty_dev);
1395                 port = ports[port_num].port;
1396                 ports[port_num].port = NULL;
1397                 gserial_free_port(port);
1398                 goto err;
1399         }
1400         *line_num = port_num;
1401         gserial_console_init();
1402 err:
1403         return ret;
1404 }
1405 EXPORT_SYMBOL_GPL(gserial_alloc_line);
1406
1407 /**
1408  * gserial_connect - notify TTY I/O glue that USB link is active
1409  * @gser: the function, set up with endpoints and descriptors
1410  * @port_num: which port is active
1411  * Context: any (usually from irq)
1412  *
1413  * This is called activate endpoints and let the TTY layer know that
1414  * the connection is active ... not unlike "carrier detect".  It won't
1415  * necessarily start I/O queues; unless the TTY is held open by any
1416  * task, there would be no point.  However, the endpoints will be
1417  * activated so the USB host can perform I/O, subject to basic USB
1418  * hardware flow control.
1419  *
1420  * Caller needs to have set up the endpoints and USB function in @dev
1421  * before calling this, as well as the appropriate (speed-specific)
1422  * endpoint descriptors, and also have allocate @port_num by calling
1423  * @gserial_alloc_line().
1424  *
1425  * Returns negative errno or zero.
1426  * On success, ep->driver_data will be overwritten.
1427  */
1428 int gserial_connect(struct gserial *gser, u8 port_num)
1429 {
1430         struct gs_port  *port;
1431         unsigned long   flags;
1432         int             status;
1433
1434         if (port_num >= MAX_U_SERIAL_PORTS)
1435                 return -ENXIO;
1436
1437         port = ports[port_num].port;
1438         if (!port) {
1439                 pr_err("serial line %d not allocated.\n", port_num);
1440                 return -EINVAL;
1441         }
1442         if (port->port_usb) {
1443                 pr_err("serial line %d is in use.\n", port_num);
1444                 return -EBUSY;
1445         }
1446
1447         /* activate the endpoints */
1448         status = usb_ep_enable(gser->in);
1449         if (status < 0)
1450                 return status;
1451         gser->in->driver_data = port;
1452
1453         status = usb_ep_enable(gser->out);
1454         if (status < 0)
1455                 goto fail_out;
1456         gser->out->driver_data = port;
1457
1458         /* then tell the tty glue that I/O can work */
1459         spin_lock_irqsave(&port->port_lock, flags);
1460         gser->ioport = port;
1461         port->port_usb = gser;
1462
1463         /* REVISIT unclear how best to handle this state...
1464          * we don't really couple it with the Linux TTY.
1465          */
1466         gser->port_line_coding = port->port_line_coding;
1467
1468         /* REVISIT if waiting on "carrier detect", signal. */
1469
1470         /* if it's already open, start I/O ... and notify the serial
1471          * protocol about open/close status (connect/disconnect).
1472          */
1473         if (port->port.count) {
1474                 pr_debug("gserial_connect: start ttyGS%d\n", port->port_num);
1475                 gs_start_io(port);
1476                 if (gser->connect)
1477                         gser->connect(gser);
1478         } else {
1479                 if (gser->disconnect)
1480                         gser->disconnect(gser);
1481         }
1482
1483         status = gs_console_connect(port_num);
1484         spin_unlock_irqrestore(&port->port_lock, flags);
1485
1486         return status;
1487
1488 fail_out:
1489         usb_ep_disable(gser->in);
1490         return status;
1491 }
1492 EXPORT_SYMBOL_GPL(gserial_connect);
1493 /**
1494  * gserial_disconnect - notify TTY I/O glue that USB link is inactive
1495  * @gser: the function, on which gserial_connect() was called
1496  * Context: any (usually from irq)
1497  *
1498  * This is called to deactivate endpoints and let the TTY layer know
1499  * that the connection went inactive ... not unlike "hangup".
1500  *
1501  * On return, the state is as if gserial_connect() had never been called;
1502  * there is no active USB I/O on these endpoints.
1503  */
1504 void gserial_disconnect(struct gserial *gser)
1505 {
1506         struct gs_port  *port = gser->ioport;
1507         unsigned long   flags;
1508
1509         if (!port)
1510                 return;
1511
1512         /* tell the TTY glue not to do I/O here any more */
1513         spin_lock_irqsave(&port->port_lock, flags);
1514
1515         /* REVISIT as above: how best to track this? */
1516         port->port_line_coding = gser->port_line_coding;
1517
1518         port->port_usb = NULL;
1519         gser->ioport = NULL;
1520         if (port->port.count > 0 || port->openclose) {
1521                 wake_up_interruptible(&port->drain_wait);
1522                 if (port->port.tty)
1523                         tty_hangup(port->port.tty);
1524         }
1525         spin_unlock_irqrestore(&port->port_lock, flags);
1526
1527         /* disable endpoints, aborting down any active I/O */
1528         usb_ep_disable(gser->out);
1529         usb_ep_disable(gser->in);
1530
1531         /* finally, free any unused/unusable I/O buffers */
1532         spin_lock_irqsave(&port->port_lock, flags);
1533         if (port->port.count == 0 && !port->openclose)
1534                 gs_buf_free(&port->port_write_buf);
1535         gs_free_requests(gser->out, &port->read_pool, NULL);
1536         gs_free_requests(gser->out, &port->read_queue, NULL);
1537         gs_free_requests(gser->in, &port->write_pool, NULL);
1538
1539         port->read_allocated = port->read_started =
1540                 port->write_allocated = port->write_started = 0;
1541
1542         gs_console_disconnect(gser->in);
1543         spin_unlock_irqrestore(&port->port_lock, flags);
1544 }
1545 EXPORT_SYMBOL_GPL(gserial_disconnect);
1546
1547 static int userial_init(void)
1548 {
1549         unsigned                        i;
1550         int                             status;
1551
1552         gs_tty_driver = alloc_tty_driver(MAX_U_SERIAL_PORTS);
1553         if (!gs_tty_driver)
1554                 return -ENOMEM;
1555
1556         gs_tty_driver->driver_name = "g_serial";
1557         gs_tty_driver->name = "ttyGS";
1558         /* uses dynamically assigned dev_t values */
1559
1560         gs_tty_driver->type = TTY_DRIVER_TYPE_SERIAL;
1561         gs_tty_driver->subtype = SERIAL_TYPE_NORMAL;
1562         gs_tty_driver->flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV;
1563         gs_tty_driver->init_termios = tty_std_termios;
1564
1565         /* 9600-8-N-1 ... matches defaults expected by "usbser.sys" on
1566          * MS-Windows.  Otherwise, most of these flags shouldn't affect
1567          * anything unless we were to actually hook up to a serial line.
1568          */
1569         gs_tty_driver->init_termios.c_cflag =
1570                         B9600 | CS8 | CREAD | HUPCL | CLOCAL;
1571         gs_tty_driver->init_termios.c_ispeed = 9600;
1572         gs_tty_driver->init_termios.c_ospeed = 9600;
1573
1574         tty_set_operations(gs_tty_driver, &gs_tty_ops);
1575         for (i = 0; i < MAX_U_SERIAL_PORTS; i++)
1576                 mutex_init(&ports[i].lock);
1577
1578         /* export the driver ... */
1579         status = tty_register_driver(gs_tty_driver);
1580         if (status) {
1581                 pr_err("%s: cannot register, err %d\n",
1582                                 __func__, status);
1583                 goto fail;
1584         }
1585
1586         pr_debug("%s: registered %d ttyGS* device%s\n", __func__,
1587                         MAX_U_SERIAL_PORTS,
1588                         (MAX_U_SERIAL_PORTS == 1) ? "" : "s");
1589
1590         return status;
1591 fail:
1592         put_tty_driver(gs_tty_driver);
1593         gs_tty_driver = NULL;
1594         return status;
1595 }
1596 module_init(userial_init);
1597
1598 static void userial_cleanup(void)
1599 {
1600         tty_unregister_driver(gs_tty_driver);
1601         put_tty_driver(gs_tty_driver);
1602         gs_tty_driver = NULL;
1603 }
1604 module_exit(userial_cleanup);
1605
1606 MODULE_LICENSE("GPL");