]> Git Repo - linux.git/blob - drivers/iio/adc/ti-adc0832.c
crypto: akcipher - Drop sign/verify operations
[linux.git] / drivers / iio / adc / ti-adc0832.c
1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3  * ADC0831/ADC0832/ADC0834/ADC0838 8-bit ADC driver
4  *
5  * Copyright (c) 2016 Akinobu Mita <[email protected]>
6  *
7  * Datasheet: https://www.ti.com/lit/ds/symlink/adc0832-n.pdf
8  */
9
10 #include <linux/module.h>
11 #include <linux/mod_devicetable.h>
12 #include <linux/spi/spi.h>
13 #include <linux/iio/iio.h>
14 #include <linux/regulator/consumer.h>
15 #include <linux/iio/buffer.h>
16 #include <linux/iio/trigger.h>
17 #include <linux/iio/triggered_buffer.h>
18 #include <linux/iio/trigger_consumer.h>
19
20 enum {
21         adc0831,
22         adc0832,
23         adc0834,
24         adc0838,
25 };
26
27 struct adc0832 {
28         struct spi_device *spi;
29         struct regulator *reg;
30         struct mutex lock;
31         u8 mux_bits;
32         /*
33          * Max size needed: 16x 1 byte ADC data + 8 bytes timestamp
34          * May be shorter if not all channels are enabled subject
35          * to the timestamp remaining 8 byte aligned.
36          */
37         u8 data[24] __aligned(8);
38
39         u8 tx_buf[2] __aligned(IIO_DMA_MINALIGN);
40         u8 rx_buf[2];
41 };
42
43 #define ADC0832_VOLTAGE_CHANNEL(chan)                                   \
44         {                                                               \
45                 .type = IIO_VOLTAGE,                                    \
46                 .indexed = 1,                                           \
47                 .channel = chan,                                        \
48                 .info_mask_separate = BIT(IIO_CHAN_INFO_RAW),           \
49                 .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE),   \
50                 .scan_index = chan,                                     \
51                 .scan_type = {                                          \
52                         .sign = 'u',                                    \
53                         .realbits = 8,                                  \
54                         .storagebits = 8,                               \
55                 },                                                      \
56         }
57
58 #define ADC0832_VOLTAGE_CHANNEL_DIFF(chan1, chan2, si)                  \
59         {                                                               \
60                 .type = IIO_VOLTAGE,                                    \
61                 .indexed = 1,                                           \
62                 .channel = (chan1),                                     \
63                 .channel2 = (chan2),                                    \
64                 .differential = 1,                                      \
65                 .info_mask_separate = BIT(IIO_CHAN_INFO_RAW),           \
66                 .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE),   \
67                 .scan_index = si,                                       \
68                 .scan_type = {                                          \
69                         .sign = 'u',                                    \
70                         .realbits = 8,                                  \
71                         .storagebits = 8,                               \
72                 },                                                      \
73         }
74
75 static const struct iio_chan_spec adc0831_channels[] = {
76         ADC0832_VOLTAGE_CHANNEL_DIFF(0, 1, 0),
77         IIO_CHAN_SOFT_TIMESTAMP(1),
78 };
79
80 static const struct iio_chan_spec adc0832_channels[] = {
81         ADC0832_VOLTAGE_CHANNEL(0),
82         ADC0832_VOLTAGE_CHANNEL(1),
83         ADC0832_VOLTAGE_CHANNEL_DIFF(0, 1, 2),
84         ADC0832_VOLTAGE_CHANNEL_DIFF(1, 0, 3),
85         IIO_CHAN_SOFT_TIMESTAMP(4),
86 };
87
88 static const struct iio_chan_spec adc0834_channels[] = {
89         ADC0832_VOLTAGE_CHANNEL(0),
90         ADC0832_VOLTAGE_CHANNEL(1),
91         ADC0832_VOLTAGE_CHANNEL(2),
92         ADC0832_VOLTAGE_CHANNEL(3),
93         ADC0832_VOLTAGE_CHANNEL_DIFF(0, 1, 4),
94         ADC0832_VOLTAGE_CHANNEL_DIFF(1, 0, 5),
95         ADC0832_VOLTAGE_CHANNEL_DIFF(2, 3, 6),
96         ADC0832_VOLTAGE_CHANNEL_DIFF(3, 2, 7),
97         IIO_CHAN_SOFT_TIMESTAMP(8),
98 };
99
100 static const struct iio_chan_spec adc0838_channels[] = {
101         ADC0832_VOLTAGE_CHANNEL(0),
102         ADC0832_VOLTAGE_CHANNEL(1),
103         ADC0832_VOLTAGE_CHANNEL(2),
104         ADC0832_VOLTAGE_CHANNEL(3),
105         ADC0832_VOLTAGE_CHANNEL(4),
106         ADC0832_VOLTAGE_CHANNEL(5),
107         ADC0832_VOLTAGE_CHANNEL(6),
108         ADC0832_VOLTAGE_CHANNEL(7),
109         ADC0832_VOLTAGE_CHANNEL_DIFF(0, 1, 8),
110         ADC0832_VOLTAGE_CHANNEL_DIFF(1, 0, 9),
111         ADC0832_VOLTAGE_CHANNEL_DIFF(2, 3, 10),
112         ADC0832_VOLTAGE_CHANNEL_DIFF(3, 2, 11),
113         ADC0832_VOLTAGE_CHANNEL_DIFF(4, 5, 12),
114         ADC0832_VOLTAGE_CHANNEL_DIFF(5, 4, 13),
115         ADC0832_VOLTAGE_CHANNEL_DIFF(6, 7, 14),
116         ADC0832_VOLTAGE_CHANNEL_DIFF(7, 6, 15),
117         IIO_CHAN_SOFT_TIMESTAMP(16),
118 };
119
120 static int adc0831_adc_conversion(struct adc0832 *adc)
121 {
122         struct spi_device *spi = adc->spi;
123         int ret;
124
125         ret = spi_read(spi, &adc->rx_buf, 2);
126         if (ret)
127                 return ret;
128
129         /*
130          * Skip TRI-STATE and a leading zero
131          */
132         return (adc->rx_buf[0] << 2 & 0xff) | (adc->rx_buf[1] >> 6);
133 }
134
135 static int adc0832_adc_conversion(struct adc0832 *adc, int channel,
136                                 bool differential)
137 {
138         struct spi_device *spi = adc->spi;
139         struct spi_transfer xfer = {
140                 .tx_buf = adc->tx_buf,
141                 .rx_buf = adc->rx_buf,
142                 .len = 2,
143         };
144         int ret;
145
146         if (!adc->mux_bits)
147                 return adc0831_adc_conversion(adc);
148
149         /* start bit */
150         adc->tx_buf[0] = 1 << (adc->mux_bits + 1);
151         /* single-ended or differential */
152         adc->tx_buf[0] |= differential ? 0 : (1 << adc->mux_bits);
153         /* odd / sign */
154         adc->tx_buf[0] |= (channel % 2) << (adc->mux_bits - 1);
155         /* select */
156         if (adc->mux_bits > 1)
157                 adc->tx_buf[0] |= channel / 2;
158
159         /* align Data output BIT7 (MSB) to 8-bit boundary */
160         adc->tx_buf[0] <<= 1;
161
162         ret = spi_sync_transfer(spi, &xfer, 1);
163         if (ret)
164                 return ret;
165
166         return adc->rx_buf[1];
167 }
168
169 static int adc0832_read_raw(struct iio_dev *iio,
170                         struct iio_chan_spec const *channel, int *value,
171                         int *shift, long mask)
172 {
173         struct adc0832 *adc = iio_priv(iio);
174
175         switch (mask) {
176         case IIO_CHAN_INFO_RAW:
177                 mutex_lock(&adc->lock);
178                 *value = adc0832_adc_conversion(adc, channel->channel,
179                                                 channel->differential);
180                 mutex_unlock(&adc->lock);
181                 if (*value < 0)
182                         return *value;
183
184                 return IIO_VAL_INT;
185         case IIO_CHAN_INFO_SCALE:
186                 *value = regulator_get_voltage(adc->reg);
187                 if (*value < 0)
188                         return *value;
189
190                 /* convert regulator output voltage to mV */
191                 *value /= 1000;
192                 *shift = 8;
193
194                 return IIO_VAL_FRACTIONAL_LOG2;
195         }
196
197         return -EINVAL;
198 }
199
200 static const struct iio_info adc0832_info = {
201         .read_raw = adc0832_read_raw,
202 };
203
204 static irqreturn_t adc0832_trigger_handler(int irq, void *p)
205 {
206         struct iio_poll_func *pf = p;
207         struct iio_dev *indio_dev = pf->indio_dev;
208         struct adc0832 *adc = iio_priv(indio_dev);
209         int scan_index;
210         int i = 0;
211
212         mutex_lock(&adc->lock);
213
214         iio_for_each_active_channel(indio_dev, scan_index) {
215                 const struct iio_chan_spec *scan_chan =
216                                 &indio_dev->channels[scan_index];
217                 int ret = adc0832_adc_conversion(adc, scan_chan->channel,
218                                                  scan_chan->differential);
219                 if (ret < 0) {
220                         dev_warn(&adc->spi->dev,
221                                  "failed to get conversion data\n");
222                         goto out;
223                 }
224
225                 adc->data[i] = ret;
226                 i++;
227         }
228         iio_push_to_buffers_with_timestamp(indio_dev, adc->data,
229                                            iio_get_time_ns(indio_dev));
230 out:
231         mutex_unlock(&adc->lock);
232
233         iio_trigger_notify_done(indio_dev->trig);
234
235         return IRQ_HANDLED;
236 }
237
238 static void adc0832_reg_disable(void *reg)
239 {
240         regulator_disable(reg);
241 }
242
243 static int adc0832_probe(struct spi_device *spi)
244 {
245         struct iio_dev *indio_dev;
246         struct adc0832 *adc;
247         int ret;
248
249         indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*adc));
250         if (!indio_dev)
251                 return -ENOMEM;
252
253         adc = iio_priv(indio_dev);
254         adc->spi = spi;
255         mutex_init(&adc->lock);
256
257         indio_dev->name = spi_get_device_id(spi)->name;
258         indio_dev->info = &adc0832_info;
259         indio_dev->modes = INDIO_DIRECT_MODE;
260
261         switch (spi_get_device_id(spi)->driver_data) {
262         case adc0831:
263                 adc->mux_bits = 0;
264                 indio_dev->channels = adc0831_channels;
265                 indio_dev->num_channels = ARRAY_SIZE(adc0831_channels);
266                 break;
267         case adc0832:
268                 adc->mux_bits = 1;
269                 indio_dev->channels = adc0832_channels;
270                 indio_dev->num_channels = ARRAY_SIZE(adc0832_channels);
271                 break;
272         case adc0834:
273                 adc->mux_bits = 2;
274                 indio_dev->channels = adc0834_channels;
275                 indio_dev->num_channels = ARRAY_SIZE(adc0834_channels);
276                 break;
277         case adc0838:
278                 adc->mux_bits = 3;
279                 indio_dev->channels = adc0838_channels;
280                 indio_dev->num_channels = ARRAY_SIZE(adc0838_channels);
281                 break;
282         default:
283                 return -EINVAL;
284         }
285
286         adc->reg = devm_regulator_get(&spi->dev, "vref");
287         if (IS_ERR(adc->reg))
288                 return PTR_ERR(adc->reg);
289
290         ret = regulator_enable(adc->reg);
291         if (ret)
292                 return ret;
293
294         ret = devm_add_action_or_reset(&spi->dev, adc0832_reg_disable,
295                                        adc->reg);
296         if (ret)
297                 return ret;
298
299         ret = devm_iio_triggered_buffer_setup(&spi->dev, indio_dev, NULL,
300                                               adc0832_trigger_handler, NULL);
301         if (ret)
302                 return ret;
303
304         return devm_iio_device_register(&spi->dev, indio_dev);
305 }
306
307 static const struct of_device_id adc0832_dt_ids[] = {
308         { .compatible = "ti,adc0831", },
309         { .compatible = "ti,adc0832", },
310         { .compatible = "ti,adc0834", },
311         { .compatible = "ti,adc0838", },
312         { }
313 };
314 MODULE_DEVICE_TABLE(of, adc0832_dt_ids);
315
316 static const struct spi_device_id adc0832_id[] = {
317         { "adc0831", adc0831 },
318         { "adc0832", adc0832 },
319         { "adc0834", adc0834 },
320         { "adc0838", adc0838 },
321         { }
322 };
323 MODULE_DEVICE_TABLE(spi, adc0832_id);
324
325 static struct spi_driver adc0832_driver = {
326         .driver = {
327                 .name = "adc0832",
328                 .of_match_table = adc0832_dt_ids,
329         },
330         .probe = adc0832_probe,
331         .id_table = adc0832_id,
332 };
333 module_spi_driver(adc0832_driver);
334
335 MODULE_AUTHOR("Akinobu Mita <[email protected]>");
336 MODULE_DESCRIPTION("ADC0831/ADC0832/ADC0834/ADC0838 driver");
337 MODULE_LICENSE("GPL v2");
This page took 0.050011 seconds and 4 git commands to generate.