1 # SPDX-License-Identifier: GPL-2.0-only
6 Panel registration and lookup framework.
9 depends on DRM && DRM_PANEL
11 config DRM_PANEL_ABT_Y030XX067A
12 tristate "ABT Y030XX067A 320x480 LCD panel"
16 Say Y here to enable support for the Asia Better Technology Ltd.
17 Y030XX067A 320x480 3.0" panel as found in the YLM RG-280M, RG-300
18 and RG-99 handheld gaming consoles.
20 config DRM_PANEL_ARM_VERSATILE
21 tristate "ARM Versatile panel driver"
24 select VIDEOMODE_HELPERS
26 This driver supports the ARM Versatile panels connected to ARM
27 reference designs. The panel is detected using special registers
28 in the Versatile family syscon registers.
30 config DRM_PANEL_ASUS_Z00T_TM5P5_NT35596
31 tristate "ASUS Z00T TM5P5 NT35596 panel"
32 depends on GPIOLIB && OF
33 depends on DRM_MIPI_DSI
34 depends on BACKLIGHT_CLASS_DEVICE
36 Say Y here if you want to enable support for the ASUS TMP5P5
37 NT35596 1080x1920 video mode panel as found in some Asus
38 Zenfone 2 Laser Z00T devices.
40 config DRM_PANEL_AUO_A030JTN01
41 tristate "AUO A030JTN01"
45 Say Y here to enable support for the AUO A030JTN01 320x480 3.0" panel
46 as found in the YLM RS-97 handheld gaming console.
48 config DRM_PANEL_BOE_BF060Y8M_AJ0
49 tristate "Boe BF060Y8M-AJ0 panel"
51 depends on DRM_MIPI_DSI
52 depends on BACKLIGHT_CLASS_DEVICE
54 Say Y here if you want to enable support for Boe BF060Y8M-AJ0
55 5.99" AMOLED modules. The panel has a 1080x2160 resolution and
56 uses 24 bit RGB per pixel. It provides a MIPI DSI interface to
57 the host and backlight is controlled through DSI commands.
59 config DRM_PANEL_BOE_HIMAX8279D
60 tristate "Boe Himax8279d panel"
62 depends on DRM_MIPI_DSI
63 depends on BACKLIGHT_CLASS_DEVICE
65 Say Y here if you want to enable support for Boe Himax8279d
66 TFT-LCD modules. The panel has a 1200x1920 resolution and uses
67 24 bit RGB per pixel. It provides a MIPI DSI interface to
68 the host and has a built-in LED backlight.
70 config DRM_PANEL_BOE_TH101MB31UIG002_28A
71 tristate "Boe TH101MB31UIG002-28A panel"
73 depends on DRM_MIPI_DSI
74 depends on BACKLIGHT_CLASS_DEVICE
76 Say Y here if you want to enable support for Boe
77 TH101MB31UIG002-28A TFT-LCD modules. The panel has a 800x1280
78 resolution and uses 24 bit RGB per pixel. It provides a MIPI DSI
79 interface to the host and has a built-in LED backlight.
81 config DRM_PANEL_BOE_TV101WUM_NL6
82 tristate "BOE TV101WUM and AUO KD101N80 45NA 1200x1920 panel"
84 depends on DRM_MIPI_DSI
85 depends on BACKLIGHT_CLASS_DEVICE
87 Say Y here if you want to support for BOE TV101WUM and AUO KD101N80
88 45NA WUXGA PANEL DSI Video Mode panel
90 config DRM_PANEL_BOE_TV101WUM_LL2
91 tristate "BOE TV101WUM LL2 1200x1920 panel"
93 depends on DRM_MIPI_DSI
94 depends on BACKLIGHT_CLASS_DEVICE
96 Say Y here if you want to support for BOE TV101WUM-LL2
97 WUXGA PANEL DSI Video Mode panel
99 config DRM_PANEL_EBBG_FT8719
100 tristate "EBBG FT8719 panel driver"
102 depends on DRM_MIPI_DSI
103 depends on BACKLIGHT_CLASS_DEVICE
105 Say Y here if you want to enable support for the EBBG FT8719
106 video mode panel. Mainly found on Xiaomi Poco F1 mobile phone.
107 The panel has a resolution of 1080x2246. It provides a MIPI DSI
108 interface to the host.
110 config DRM_PANEL_ELIDA_KD35T133
111 tristate "Elida KD35T133 panel driver"
113 depends on DRM_MIPI_DSI
114 depends on BACKLIGHT_CLASS_DEVICE
116 Say Y here if you want to enable support for the Elida
117 KD35T133 controller for 320x480 LCD panels with MIPI-DSI
120 config DRM_PANEL_FEIXIN_K101_IM2BA02
121 tristate "Feixin K101 IM2BA02 panel"
123 depends on DRM_MIPI_DSI
124 depends on BACKLIGHT_CLASS_DEVICE
126 Say Y here if you want to enable support for the Feixin K101 IM2BA02
127 4-lane 800x1280 MIPI DSI panel.
129 config DRM_PANEL_FEIYANG_FY07024DI26A30D
130 tristate "Feiyang FY07024DI26A30-D MIPI-DSI LCD panel"
132 depends on DRM_MIPI_DSI
133 depends on BACKLIGHT_CLASS_DEVICE
135 Say Y if you want to enable support for panels based on the
136 Feiyang FY07024DI26A30-D MIPI-DSI interface.
138 config DRM_PANEL_DSI_CM
139 tristate "Generic DSI command mode panels"
141 depends on DRM_MIPI_DSI
142 depends on BACKLIGHT_CLASS_DEVICE
144 DRM panel driver for DSI command mode panels with support for
145 embedded and external backlights.
147 config DRM_PANEL_LVDS
148 tristate "Generic LVDS panel driver"
150 depends on BACKLIGHT_CLASS_DEVICE
151 select VIDEOMODE_HELPERS
153 This driver supports LVDS panels that don't require device-specific
154 handling of power supplies or control signals. It implements automatic
155 backlight handling if the panel is attached to a backlight controller.
157 config DRM_PANEL_HIMAX_HX83102
158 tristate "Himax HX83102-based panels"
160 depends on DRM_MIPI_DSI
161 depends on BACKLIGHT_CLASS_DEVICE
163 Say Y if you want to enable support for panels based on the
164 Himax HX83102 controller.
166 config DRM_PANEL_HIMAX_HX83112A
167 tristate "Himax HX83112A-based DSI panel"
169 depends on DRM_MIPI_DSI
170 depends on BACKLIGHT_CLASS_DEVICE
171 select DRM_KMS_HELPER
173 Say Y here if you want to enable support for Himax HX83112A-based
174 display panels, such as the one found in the Fairphone 4 smartphone.
176 config DRM_PANEL_HIMAX_HX8394
177 tristate "HIMAX HX8394 MIPI-DSI LCD panels"
179 depends on DRM_MIPI_DSI
180 depends on BACKLIGHT_CLASS_DEVICE
182 Say Y if you want to enable support for panels based on the
183 Himax HX8394 controller, such as the HannStar HSD060BHW4
184 720x1440 TFT LCD panel that uses a MIPI-DSI interface.
186 If M is selected the module will be called panel-himax-hx8394.
188 config DRM_PANEL_ILITEK_IL9322
189 tristate "Ilitek ILI9322 320x240 QVGA panels"
193 Say Y here if you want to enable support for Ilitek IL9322
194 QVGA (320x240) RGB, YUV and ITU-T BT.656 panels.
196 config DRM_PANEL_ILITEK_ILI9341
197 tristate "Ilitek ILI9341 240x320 QVGA panels"
199 select DRM_KMS_HELPER
200 select DRM_GEM_DMA_HELPER
201 depends on BACKLIGHT_CLASS_DEVICE
204 Say Y here if you want to enable support for Ilitek IL9341
205 QVGA (240x320) RGB panels. support serial & parallel rgb
208 config DRM_PANEL_ILITEK_ILI9805
209 tristate "Ilitek ILI9805-based panels"
211 depends on DRM_MIPI_DSI
212 depends on BACKLIGHT_CLASS_DEVICE
214 Say Y if you want to enable support for panels based on the
215 Ilitek ILI9805 controller.
217 config DRM_PANEL_ILITEK_ILI9806E
218 tristate "Ilitek ILI9806E-based panels"
220 depends on DRM_MIPI_DSI
221 depends on BACKLIGHT_CLASS_DEVICE
223 Say Y if you want to enable support for panels based on the
224 Ilitek ILI9806E controller.
226 config DRM_PANEL_ILITEK_ILI9881C
227 tristate "Ilitek ILI9881C-based panels"
229 depends on DRM_MIPI_DSI
230 depends on BACKLIGHT_CLASS_DEVICE
232 Say Y if you want to enable support for panels based on the
233 Ilitek ILI9881c controller.
235 config DRM_PANEL_ILITEK_ILI9882T
236 tristate "Ilitek ILI9882t-based panels"
238 depends on DRM_MIPI_DSI
239 depends on BACKLIGHT_CLASS_DEVICE
241 Say Y if you want to enable support for panels based on the
242 Ilitek ILI9882t controller.
244 config DRM_PANEL_INNOLUX_EJ030NA
245 tristate "Innolux EJ030NA 320x480 LCD panel"
249 Say Y here to enable support for the Innolux/Chimei EJ030NA
250 320x480 3.0" panel as found in the RS97 V2.1, RG300(non-ips)
251 and LDK handheld gaming consoles.
253 config DRM_PANEL_INNOLUX_P079ZCA
254 tristate "Innolux P079ZCA panel"
256 depends on DRM_MIPI_DSI
257 depends on BACKLIGHT_CLASS_DEVICE
259 Say Y here if you want to enable support for Innolux P079ZCA
260 TFT-LCD modules. The panel has a 1024x768 resolution and uses
261 24 bit RGB per pixel. It provides a MIPI DSI interface to
262 the host and has a built-in LED backlight.
264 config DRM_PANEL_JADARD_JD9365DA_H3
265 tristate "Jadard JD9365DA-H3 WXGA DSI panel"
267 depends on DRM_MIPI_DSI
268 depends on BACKLIGHT_CLASS_DEVICE
270 Say Y here if you want to enable support for Jadard JD9365DA-H3
271 WXGA MIPI DSI panel. The panel support TFT dot matrix LCD with
272 800RGBx1280 dots at maximum.
274 config DRM_PANEL_JDI_LPM102A188A
275 tristate "JDI LPM102A188A DSI panel"
276 depends on OF && GPIOLIB
277 depends on DRM_MIPI_DSI
278 depends on BACKLIGHT_CLASS_DEVICE
280 Say Y here if you want to enable support for JDI LPM102A188A DSI
281 command mode panel as found in Google Pixel C devices.
282 The panel has a 2560×1800 resolution. It provides a MIPI DSI interface
285 config DRM_PANEL_JDI_LT070ME05000
286 tristate "JDI LT070ME05000 WUXGA DSI panel"
288 depends on DRM_MIPI_DSI
289 depends on BACKLIGHT_CLASS_DEVICE
291 Say Y here if you want to enable support for JDI DSI video mode
292 panel as found in Google Nexus 7 (2013) devices.
293 The panel has a 1200(RGB)×1920 (WUXGA) resolution and uses
296 config DRM_PANEL_JDI_R63452
297 tristate "JDI R63452 Full HD DSI panel"
299 depends on DRM_MIPI_DSI
300 depends on BACKLIGHT_CLASS_DEVICE
302 Say Y here if you want to enable support for the JDI R63452
303 DSI command mode panel as found in Xiaomi Mi 5 Devices.
305 config DRM_PANEL_KHADAS_TS050
306 tristate "Khadas TS050 panel"
308 depends on DRM_MIPI_DSI
309 depends on BACKLIGHT_CLASS_DEVICE
311 Say Y here if you want to enable support for Khadas TS050 TFT-LCD
312 panel module. The panel has a 1080x1920 resolution and uses
313 24 bit RGB per pixel. It provides a MIPI DSI interface to
314 the host, a built-in LED backlight and touch controller.
316 config DRM_PANEL_KINGDISPLAY_KD097D04
317 tristate "Kingdisplay kd097d04 panel"
319 depends on DRM_MIPI_DSI
320 depends on BACKLIGHT_CLASS_DEVICE
322 Say Y here if you want to enable support for Kingdisplay kd097d04
323 TFT-LCD modules. The panel has a 1536x2048 resolution and uses
324 24 bit RGB per pixel. It provides a MIPI DSI interface to
325 the host and has a built-in LED backlight.
327 config DRM_PANEL_LEADTEK_LTK050H3146W
328 tristate "Leadtek LTK050H3146W panel"
330 depends on DRM_MIPI_DSI
331 depends on BACKLIGHT_CLASS_DEVICE
333 Say Y here if you want to enable support for Leadtek LTK050H3146W
334 TFT-LCD modules. The panel has a 720x1280 resolution and uses
335 24 bit RGB per pixel. It provides a MIPI DSI interface to
336 the host and has a built-in LED backlight.
338 config DRM_PANEL_LEADTEK_LTK500HD1829
339 tristate "Leadtek LTK500HD1829 panel"
341 depends on DRM_MIPI_DSI
342 depends on BACKLIGHT_CLASS_DEVICE
344 Say Y here if you want to enable support for Kingdisplay kd097d04
345 TFT-LCD modules. The panel has a 1536x2048 resolution and uses
346 24 bit RGB per pixel. It provides a MIPI DSI interface to
347 the host and has a built-in LED backlight.
349 config DRM_PANEL_LINCOLNTECH_LCD197
350 tristate "Lincoln Technologies lcd197 panel"
352 depends on DRM_MIPI_DSI
353 depends on BACKLIGHT_CLASS_DEVICE
355 Say Y here if you want to enable support for lincolntech lcd197
356 TFT-LCD modules. The panel has a 1080x1920 resolution and uses
357 24 bit RGB per pixel. It provides a MIPI DSI interface to
360 config DRM_PANEL_LG_LB035Q02
361 tristate "LG LB035Q024573 RGB panel"
362 depends on GPIOLIB && OF && SPI
364 Say Y here if you want to enable support for the LB035Q02 RGB panel
365 (found on the Gumstix Overo Palo35 board). To compile this driver as
366 a module, choose M here.
368 config DRM_PANEL_LG_LG4573
369 tristate "LG4573 RGB/SPI panel"
371 select VIDEOMODE_HELPERS
373 Say Y here if you want to enable support for LG4573 RGB panel.
374 To compile this driver as a module, choose M here.
376 config DRM_PANEL_LG_SW43408
377 tristate "LG SW43408 panel"
379 depends on DRM_MIPI_DSI
380 depends on BACKLIGHT_CLASS_DEVICE
381 select DRM_DISPLAY_DP_HELPER
382 select DRM_DISPLAY_HELPER
384 Say Y here if you want to enable support for LG sw43408 panel.
385 The panel has a 1080x2160@60Hz resolution and uses 24 bit RGB per
386 pixel. It provides a MIPI DSI interface to the host and has a
387 built-in LED backlight.
389 config DRM_PANEL_MAGNACHIP_D53E6EA8966
390 tristate "Magnachip D53E6EA8966 DSI panel"
392 depends on DRM_MIPI_DSI
393 depends on BACKLIGHT_CLASS_DEVICE
396 DRM panel driver for the Samsung AMS495QA01 panel controlled
397 with the Magnachip D53E6EA8966 panel IC. This panel receives
398 video data via DSI but commands via 9-bit SPI using DBI.
400 config DRM_PANEL_MANTIX_MLAF057WE51
401 tristate "Mantix MLAF057WE51-X MIPI-DSI LCD panel"
403 depends on DRM_MIPI_DSI
404 depends on BACKLIGHT_CLASS_DEVICE
406 Say Y here if you want to enable support for the Mantix
407 MLAF057WE51-X MIPI DSI panel as e.g. used in the Librem 5. It
408 has a resolution of 720x1440 pixels, a built in backlight and touch
411 config DRM_PANEL_NEC_NL8048HL11
412 tristate "NEC NL8048HL11 RGB panel"
413 depends on GPIOLIB && OF && SPI
415 Say Y here if you want to enable support for the NEC NL8048HL11 RGB
416 panel (found on the Zoom2/3/3630 SDP boards). To compile this driver
417 as a module, choose M here.
419 config DRM_PANEL_NEWVISION_NV3051D
420 tristate "NewVision NV3051D DSI panel"
422 depends on DRM_MIPI_DSI
423 depends on BACKLIGHT_CLASS_DEVICE
425 This driver supports the NV3051D based panel found on the Anbernic
428 config DRM_PANEL_NEWVISION_NV3052C
429 tristate "NewVision NV3052C RGB/SPI panel"
431 depends on BACKLIGHT_CLASS_DEVICE
434 Say Y here if you want to enable support for the panels built
435 around the NewVision NV3052C display controller.
437 config DRM_PANEL_NOVATEK_NT35510
438 tristate "Novatek NT35510 RGB panel driver"
440 depends on DRM_MIPI_DSI
441 depends on BACKLIGHT_CLASS_DEVICE
443 Say Y here if you want to enable support for the panels built
444 around the Novatek NT35510 display controller, such as some
447 config DRM_PANEL_NOVATEK_NT35560
448 tristate "Novatek NT35560 DSI command mode panel"
450 depends on DRM_MIPI_DSI
451 depends on BACKLIGHT_CLASS_DEVICE
452 select VIDEOMODE_HELPERS
454 Say Y here if you want to enable the Novatek NT35560 display
455 controller. This panel supports DSI in both command and video
456 mode. This supports several panels such as Sony ACX424AKM and
459 config DRM_PANEL_NOVATEK_NT35950
460 tristate "Novatek NT35950 DSI panel"
462 depends on DRM_MIPI_DSI
463 depends on BACKLIGHT_CLASS_DEVICE
465 Say Y here if you want to enable support for the panels built
466 around the Novatek NT35950 display controller, such as some
467 Sharp panels used in Sony Xperia Z5 Premium and XZ Premium
470 config DRM_PANEL_NOVATEK_NT36523
471 tristate "Novatek NT36523 panel driver"
473 depends on DRM_MIPI_DSI
474 depends on BACKLIGHT_CLASS_DEVICE
476 Say Y here if you want to enable support for the panels built
477 around the Novatek NT36523 display controller, such as some
478 Boe panels used in Xiaomi Mi Pad 5 and 5 Pro tablets.
480 config DRM_PANEL_NOVATEK_NT36672A
481 tristate "Novatek NT36672A DSI panel"
483 depends on DRM_MIPI_DSI
484 depends on BACKLIGHT_CLASS_DEVICE
486 Say Y here if you want to enable support for the panels built
487 around the Novatek NT36672A display controller, such as some
488 Tianma panels used in a few Xiaomi Poco F1 mobile phones.
490 config DRM_PANEL_NOVATEK_NT36672E
491 tristate "Novatek NT36672E DSI panel"
493 depends on DRM_MIPI_DSI
494 depends on BACKLIGHT_CLASS_DEVICE
496 Say Y here if you want to enable support for Novatek NT36672E DSI Video Mode
497 LCD panel module. The panel has a resolution of 1080x2408 and uses 24 bit
500 config DRM_PANEL_NOVATEK_NT39016
501 tristate "Novatek NT39016 RGB/SPI panel"
503 depends on BACKLIGHT_CLASS_DEVICE
506 Say Y here if you want to enable support for the panels built
507 around the Novatek NT39016 display controller.
509 config DRM_PANEL_OLIMEX_LCD_OLINUXINO
510 tristate "Olimex LCD-OLinuXino panel"
513 depends on BACKLIGHT_CLASS_DEVICE
516 The panel is used with different sizes LCDs, from 480x272 to
517 1280x800, and 24 bit per pixel.
519 Say Y here if you want to enable support for Olimex Ltd.
522 config DRM_PANEL_ORISETECH_OTA5601A
523 tristate "Orise Technology ota5601a RGB/SPI panel"
525 depends on BACKLIGHT_CLASS_DEVICE
528 Say Y here if you want to enable support for the panels built
529 around the Orise Technology OTA9601A display controller.
531 config DRM_PANEL_ORISETECH_OTM8009A
532 tristate "Orise Technology otm8009a 480x800 dsi 2dl panel"
534 depends on DRM_MIPI_DSI
535 depends on BACKLIGHT_CLASS_DEVICE
537 Say Y here if you want to enable support for Orise Technology
538 otm8009a 480x800 dsi 2dl panel.
540 config DRM_PANEL_OSD_OSD101T2587_53TS
541 tristate "OSD OSD101T2587-53TS DSI 1920x1200 video mode panel"
543 depends on DRM_MIPI_DSI
544 depends on BACKLIGHT_CLASS_DEVICE
546 Say Y here if you want to enable support for One Stop Displays
547 OSD101T2587-53TS 10.1" 1920x1200 dsi panel.
549 config DRM_PANEL_PANASONIC_VVX10F034N00
550 tristate "Panasonic VVX10F034N00 1920x1200 video mode panel"
552 depends on DRM_MIPI_DSI
553 depends on BACKLIGHT_CLASS_DEVICE
555 Say Y here if you want to enable support for Panasonic VVX10F034N00
556 WUXGA (1920x1200) Novatek NT1397-based DSI panel as found in some
559 config DRM_PANEL_RASPBERRYPI_TOUCHSCREEN
560 tristate "Raspberry Pi 7-inch touchscreen panel"
561 depends on DRM_MIPI_DSI
563 Say Y here if you want to enable support for the Raspberry
564 Pi 7" Touchscreen. To compile this driver as a module,
567 config DRM_PANEL_RAYDIUM_RM67191
568 tristate "Raydium RM67191 FHD 1080x1920 DSI video mode panel"
570 depends on DRM_MIPI_DSI
571 depends on BACKLIGHT_CLASS_DEVICE
573 Say Y here if you want to enable support for Raydium RM67191 FHD
574 (1080x1920) DSI panel.
576 config DRM_PANEL_RAYDIUM_RM68200
577 tristate "Raydium RM68200 720x1280 DSI video mode panel"
579 depends on DRM_MIPI_DSI
580 depends on BACKLIGHT_CLASS_DEVICE
582 Say Y here if you want to enable support for Raydium RM68200
583 720x1280 DSI video mode panel.
585 config DRM_PANEL_RAYDIUM_RM692E5
586 tristate "Raydium RM692E5-based DSI panel"
588 depends on DRM_MIPI_DSI
589 depends on BACKLIGHT_CLASS_DEVICE
590 select DRM_DISPLAY_DP_HELPER
591 select DRM_DISPLAY_HELPER
593 Say Y here if you want to enable support for Raydium RM692E5-based
594 display panels, such as the one found in the Fairphone 5 smartphone.
596 config DRM_PANEL_RAYDIUM_RM69380
597 tristate "Raydium RM69380-based DSI panel"
598 depends on OF && GPIOLIB
599 depends on DRM_MIPI_DSI
600 depends on BACKLIGHT_CLASS_DEVICE
602 Say Y here if you want to enable support for Raydium RM69380-based
605 This panel controller can be found in the Lenovo Xiaoxin Pad Pro 2021
606 in combination with an EDO OLED panel.
608 config DRM_PANEL_RONBO_RB070D30
609 tristate "Ronbo Electronics RB070D30 panel"
611 depends on DRM_MIPI_DSI
612 depends on BACKLIGHT_CLASS_DEVICE
614 Say Y here if you want to enable support for Ronbo Electronics
615 RB070D30 1024x600 DSI panel.
617 config DRM_PANEL_SAMSUNG_S6E88A0_AMS452EF01
618 tristate "Samsung AMS452EF01 panel with S6E88A0 DSI video mode controller"
621 select VIDEOMODE_HELPERS
623 config DRM_PANEL_SAMSUNG_ATNA33XC20
624 tristate "Samsung ATNA33XC20 eDP panel"
626 depends on BACKLIGHT_CLASS_DEVICE
628 select DRM_DISPLAY_DP_HELPER
629 select DRM_DISPLAY_HELPER
630 select DRM_DISPLAY_DP_AUX_BUS
632 DRM panel driver for the Samsung ATNA33XC20 panel. This panel can't
633 be handled by the DRM_PANEL_SIMPLE driver because its power
634 sequencing is non-standard.
636 config DRM_PANEL_SAMSUNG_DB7430
637 tristate "Samsung DB7430-based DPI panels"
638 depends on OF && SPI && GPIOLIB
639 depends on BACKLIGHT_CLASS_DEVICE
642 Say Y here if you want to enable support for the Samsung
643 DB7430 DPI display controller used in such devices as the
644 LMS397KF04 480x800 DPI panel.
646 config DRM_PANEL_SAMSUNG_LD9040
647 tristate "Samsung LD9040 RGB/SPI panel"
649 depends on BACKLIGHT_CLASS_DEVICE
650 select VIDEOMODE_HELPERS
652 config DRM_PANEL_SAMSUNG_S6E3FA7
653 tristate "Samsung S6E3FA7 panel driver"
655 depends on DRM_MIPI_DSI
656 depends on BACKLIGHT_CLASS_DEVICE
658 Say Y here if you want to enable support for the Samsung S6E3FA7
661 config DRM_PANEL_SAMSUNG_S6D16D0
662 tristate "Samsung S6D16D0 DSI video mode panel"
664 depends on DRM_MIPI_DSI
665 select VIDEOMODE_HELPERS
667 config DRM_PANEL_SAMSUNG_S6D27A1
668 tristate "Samsung S6D27A1 DPI panel driver"
669 depends on OF && SPI && GPIOLIB
672 Say Y here if you want to enable support for the Samsung
673 S6D27A1 DPI 480x800 panel.
675 This panel can be found in Samsung Galaxy Ace 2
676 GT-I8160 mobile phone.
678 config DRM_PANEL_SAMSUNG_S6D7AA0
679 tristate "Samsung S6D7AA0 MIPI-DSI video mode panel controller"
681 depends on BACKLIGHT_CLASS_DEVICE
683 select VIDEOMODE_HELPERS
685 config DRM_PANEL_SAMSUNG_S6E3HA2
686 tristate "Samsung S6E3HA2 DSI video mode panel"
688 depends on DRM_MIPI_DSI
689 depends on BACKLIGHT_CLASS_DEVICE
690 select VIDEOMODE_HELPERS
692 config DRM_PANEL_SAMSUNG_S6E63J0X03
693 tristate "Samsung S6E63J0X03 DSI command mode panel"
695 depends on DRM_MIPI_DSI
696 depends on BACKLIGHT_CLASS_DEVICE
697 select VIDEOMODE_HELPERS
699 config DRM_PANEL_SAMSUNG_S6E63M0
700 tristate "Samsung S6E63M0 RGB panel"
702 depends on BACKLIGHT_CLASS_DEVICE
704 Say Y here if you want to enable support for Samsung S6E63M0
705 AMOLED LCD panel. This panel can be accessed using SPI or
708 config DRM_PANEL_SAMSUNG_S6E63M0_SPI
709 tristate "Samsung S6E63M0 RGB SPI interface"
711 depends on DRM_PANEL_SAMSUNG_S6E63M0
712 default DRM_PANEL_SAMSUNG_S6E63M0
715 Say Y here if you want to be able to access the Samsung
716 S6E63M0 panel using SPI.
718 config DRM_PANEL_SAMSUNG_S6E63M0_DSI
719 tristate "Samsung S6E63M0 RGB DSI interface"
720 depends on DRM_MIPI_DSI
721 depends on DRM_PANEL_SAMSUNG_S6E63M0
723 Say Y here if you want to be able to access the Samsung
724 S6E63M0 panel using DSI.
726 config DRM_PANEL_SAMSUNG_S6E8AA0
727 tristate "Samsung S6E8AA0 DSI video mode panel"
730 select VIDEOMODE_HELPERS
732 config DRM_PANEL_SAMSUNG_SOFEF00
733 tristate "Samsung sofef00/s6e3fc2x01 OnePlus 6/6T DSI cmd mode panels"
735 depends on DRM_MIPI_DSI
736 depends on BACKLIGHT_CLASS_DEVICE
737 select VIDEOMODE_HELPERS
739 Say Y or M here if you want to enable support for the Samsung AMOLED
740 command mode panels found in the OnePlus 6/6T smartphones.
742 The panels are 2280x1080@60Hz and 2340x1080@60Hz respectively
744 config DRM_PANEL_SEIKO_43WVF1G
745 tristate "Seiko 43WVF1G panel"
747 depends on BACKLIGHT_CLASS_DEVICE
748 select VIDEOMODE_HELPERS
750 Say Y here if you want to enable support for the Seiko
751 43WVF1G controller for 800x480 LCD panels
753 config DRM_PANEL_SHARP_LQ101R1SX01
754 tristate "Sharp LQ101R1SX01 panel"
756 depends on DRM_MIPI_DSI
757 depends on BACKLIGHT_CLASS_DEVICE
759 Say Y here if you want to enable support for Sharp LQ101R1SX01
760 TFT-LCD modules. The panel has a 2560x1600 resolution and uses
761 24 bit RGB per pixel. It provides a dual MIPI DSI interface to
762 the host and has a built-in LED backlight.
764 To compile this driver as a module, choose M here: the module
765 will be called panel-sharp-lq101r1sx01.
767 config DRM_PANEL_SHARP_LS037V7DW01
768 tristate "Sharp LS037V7DW01 VGA LCD panel"
769 depends on GPIOLIB && OF && REGULATOR
771 Say Y here if you want to enable support for Sharp LS037V7DW01 VGA
772 (480x640) LCD panel (found on the TI SDP3430 board).
774 config DRM_PANEL_SHARP_LS043T1LE01
775 tristate "Sharp LS043T1LE01 qHD video mode panel"
777 depends on DRM_MIPI_DSI
778 depends on BACKLIGHT_CLASS_DEVICE
780 Say Y here if you want to enable support for Sharp LS043T1LE01 qHD
781 (540x960) DSI panel as found on the Qualcomm APQ8074 Dragonboard
783 config DRM_PANEL_SHARP_LS060T1SX01
784 tristate "Sharp LS060T1SX01 FullHD video mode panel"
786 depends on DRM_MIPI_DSI
787 depends on BACKLIGHT_CLASS_DEVICE
789 Say Y here if you want to enable support for Sharp LS060T1SX01 6.0"
790 FullHD (1080x1920) DSI panel as found in Dragonboard Display Adapter
793 config DRM_PANEL_SITRONIX_ST7701
794 tristate "Sitronix ST7701 panel driver"
796 depends on SPI || DRM_MIPI_DSI
797 select DRM_MIPI_DBI if SPI
798 depends on BACKLIGHT_CLASS_DEVICE
800 Say Y here if you want to enable support for the Sitronix
801 ST7701 controller for 480X864 LCD panels with MIPI/RGB/SPI
804 config DRM_PANEL_SITRONIX_ST7703
805 tristate "Sitronix ST7703 based MIPI touchscreen panels"
807 depends on DRM_MIPI_DSI
808 depends on BACKLIGHT_CLASS_DEVICE
810 Say Y here if you want to enable support for Sitronix ST7703 based
811 panels, souch as Rocktech JH057N00900 MIPI DSI panel as e.g. used in
812 the Librem 5 devkit. It has a resolution of 720x1440 pixels, a built
813 in backlight and touch controller.
814 Touch input support is provided by the goodix driver and needs to be
817 config DRM_PANEL_SITRONIX_ST7789V
818 tristate "Sitronix ST7789V panel"
820 depends on BACKLIGHT_CLASS_DEVICE
822 Say Y here if you want to enable support for the Sitronix
823 ST7789V controller for 240x320 LCD panels
825 config DRM_PANEL_SONY_ACX565AKM
826 tristate "Sony ACX565AKM panel"
827 depends on GPIOLIB && OF && SPI
828 depends on BACKLIGHT_CLASS_DEVICE
830 Say Y here if you want to enable support for the Sony ACX565AKM
831 800x600 3.5" panel (found on the Nokia N900).
833 config DRM_PANEL_SONY_TD4353_JDI
834 tristate "Sony TD4353 JDI panel"
835 depends on GPIOLIB && OF
836 depends on DRM_MIPI_DSI
837 depends on BACKLIGHT_CLASS_DEVICE
839 Say Y here if you want to enable support for the Sony Tama
840 TD4353 JDI command mode panel as found on some Sony Xperia
841 XZ2 and XZ2 Compact smartphones.
843 config DRM_PANEL_SONY_TULIP_TRULY_NT35521
844 tristate "Sony Tulip Truly NT35521 panel"
845 depends on GPIOLIB && OF
846 depends on DRM_MIPI_DSI
847 depends on BACKLIGHT_CLASS_DEVICE
849 Say Y here if you want to enable support for the Sony Tulip
850 NT35521 1280x720 video mode panel as found on Sony Xperia M4
853 config DRM_PANEL_STARTEK_KD070FHFID015
854 tristate "STARTEK KD070FHFID015 panel"
856 depends on DRM_MIPI_DSI
857 depends on BACKLIGHT_CLASS_DEVICE
859 Say Y here if you want to enable support for STARTEK KD070FHFID015 DSI panel
860 based on RENESAS-R69429 controller. The pannel is a 7-inch TFT LCD display
861 with a resolution of 1024 x 600 pixels. It provides a MIPI DSI interface to
862 the host, a built-in LED backlight and touch controller.
865 tristate "support for simple Embedded DisplayPort panels"
867 depends on BACKLIGHT_CLASS_DEVICE
869 select VIDEOMODE_HELPERS
870 select DRM_DISPLAY_DP_HELPER
871 select DRM_DISPLAY_HELPER
872 select DRM_DISPLAY_DP_AUX_BUS
873 select DRM_KMS_HELPER
875 DRM panel driver for dumb eDP panels that need at most a regulator and
876 a GPIO to be powered up. Optionally a backlight can be attached so
877 that it can be automatically turned off when the panel goes into a
880 config DRM_PANEL_SIMPLE
881 tristate "support for simple panels (other than eDP ones)"
883 depends on BACKLIGHT_CLASS_DEVICE
885 select VIDEOMODE_HELPERS
887 DRM panel driver for dumb non-eDP panels that need at most a regulator
888 and a GPIO to be powered up. Optionally a backlight can be attached so
889 that it can be automatically turned off when the panel goes into a
892 config DRM_PANEL_SYNAPTICS_R63353
893 tristate "Synaptics R63353-based panels"
895 depends on DRM_MIPI_DSI
896 depends on BACKLIGHT_CLASS_DEVICE
898 Say Y if you want to enable support for panels based on the
899 Synaptics R63353 controller.
901 config DRM_PANEL_TDO_TL070WSH30
902 tristate "TDO TL070WSH30 DSI panel"
904 depends on DRM_MIPI_DSI
905 depends on BACKLIGHT_CLASS_DEVICE
907 Say Y here if you want to enable support for TDO TL070WSH30 TFT-LCD
908 panel module. The panel has a 1024×600 resolution and uses
909 24 bit RGB per pixel. It provides a MIPI DSI interface to
910 the host, a built-in LED backlight and touch controller.
912 config DRM_PANEL_TPO_TD028TTEC1
913 tristate "Toppoly (TPO) TD028TTEC1 panel driver"
915 depends on BACKLIGHT_CLASS_DEVICE
917 Say Y here if you want to enable support for TPO TD028TTEC1 480x640
918 2.8" panel (found on the OpenMoko Neo FreeRunner and Neo 1973).
920 config DRM_PANEL_TPO_TD043MTEA1
921 tristate "Toppoly (TPO) TD043MTEA1 panel driver"
922 depends on GPIOLIB && OF && REGULATOR && SPI
924 Say Y here if you want to enable support for TPO TD043MTEA1 800x480
925 4.3" panel (found on the OMAP3 Pandora board).
927 config DRM_PANEL_TPO_TPG110
928 tristate "TPO TPG 800x400 panel"
929 depends on OF && SPI && GPIOLIB
930 depends on BACKLIGHT_CLASS_DEVICE
932 Say Y here if you want to enable support for TPO TPG110
933 400CH LTPS TFT LCD Single Chip Digital Driver for up to
936 config DRM_PANEL_TRULY_NT35597_WQXGA
937 tristate "Truly WQXGA"
939 depends on DRM_MIPI_DSI
941 Say Y here if you want to enable support for Truly NT35597 WQXGA Dual DSI
944 config DRM_PANEL_VISIONOX_R66451
945 tristate "Visionox R66451"
947 depends on DRM_MIPI_DSI
948 depends on BACKLIGHT_CLASS_DEVICE
949 select DRM_DISPLAY_DP_HELPER
950 select DRM_DISPLAY_HELPER
952 Say Y here if you want to enable support for Visionox
953 R66451 1080x2340 AMOLED DSI panel.
955 config DRM_PANEL_VISIONOX_RM69299
956 tristate "Visionox RM69299"
958 depends on DRM_MIPI_DSI
960 Say Y here if you want to enable support for Visionox
961 RM69299 DSI Video Mode panel.
963 config DRM_PANEL_VISIONOX_VTDR6130
964 tristate "Visionox VTDR6130"
966 depends on DRM_MIPI_DSI
967 depends on BACKLIGHT_CLASS_DEVICE
969 Say Y here if you want to enable support for Visionox
970 VTDR6130 1080x2400 AMOLED DSI panel.
972 config DRM_PANEL_WIDECHIPS_WS2401
973 tristate "Widechips WS2401 DPI panel driver"
974 depends on SPI && GPIOLIB
975 depends on BACKLIGHT_CLASS_DEVICE
978 Say Y here if you want to enable support for the Widechips WS2401 DPI
979 480x800 display controller used in panels such as Samsung LMS380KF01.
980 This display is used in the Samsung Galaxy Ace 2 GT-I8160 (Codina).
982 config DRM_PANEL_XINPENG_XPP055C272
983 tristate "Xinpeng XPP055C272 panel driver"
985 depends on DRM_MIPI_DSI
986 depends on BACKLIGHT_CLASS_DEVICE
988 Say Y here if you want to enable support for the Xinpeng
989 XPP055C272 controller for 720x1280 LCD panels with MIPI/RGB/SPI