drivers/usb/usbip/vhci_hcd.c

   1 // SPDX-License-Identifier: GPL-2.0+
   2 /*
   3  * Copyright (C) 2003-2008 Takahiro Hirofuchi
   4  * Copyright (C) 2015-2016 Nobuo Iwata
   5  */
   6
   7 #include <linux/init.h>
   8 #include <linux/file.h>
   9 #include <linux/kernel.h>
  10 #include <linux/kthread.h>
  11 #include <linux/module.h>
  12 #include <linux/platform_device.h>
  13 #include <linux/slab.h>
  14
  15 #include "usbip_common.h"
  16 #include "vhci.h"
  17
  18 #define DRIVER_AUTHOR "Takahiro Hirofuchi"
  19 #define DRIVER_DESC "USB/IP 'Virtual' Host Controller (VHCI) Driver"
  20
  21 /*
  22  * TODO
  23  *      - update root hub emulation
  24  *      - move the emulation code to userland ?
  25  *              porting to other operating systems
  26  *              minimize kernel code
  27  *      - add suspend/resume code
  28  *      - clean up everything
  29  */
  30
  31 /* See usb gadget dummy hcd */
  32
  33 static int vhci_hub_status(struct usb_hcd *hcd, char *buff);
  34 static int vhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
  35                             u16 wIndex, char *buff, u16 wLength);
  36 static int vhci_urb_enqueue(struct usb_hcd *hcd, struct urb *urb,
  37                             gfp_t mem_flags);
  38 static int vhci_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status);
  39 static int vhci_start(struct usb_hcd *vhci_hcd);
  40 static void vhci_stop(struct usb_hcd *hcd);
  41 static int vhci_get_frame_number(struct usb_hcd *hcd);
  42
  43 static const char driver_name[] = "vhci_hcd";
  44 static const char driver_desc[] = "USB/IP Virtual Host Controller";
  45
  46 int vhci_num_controllers = VHCI_NR_HCS;
  47 struct vhci *vhcis;
  48
  49 static const char * const bit_desc[] = {
  50         "CONNECTION",           /*0*/
  51         "ENABLE",               /*1*/
  52         "SUSPEND",              /*2*/
  53         "OVER_CURRENT",         /*3*/
  54         "RESET",                /*4*/
  55         "L1",                   /*5*/
  56         "R6",                   /*6*/
  57         "R7",                   /*7*/
  58         "POWER",                /*8*/
  59         "LOWSPEED",             /*9*/
  60         "HIGHSPEED",            /*10*/
  61         "PORT_TEST",            /*11*/
  62         "INDICATOR",            /*12*/
  63         "R13",                  /*13*/
  64         "R14",                  /*14*/
  65         "R15",                  /*15*/
  66         "C_CONNECTION",         /*16*/
  67         "C_ENABLE",             /*17*/
  68         "C_SUSPEND",            /*18*/
  69         "C_OVER_CURRENT",       /*19*/
  70         "C_RESET",              /*20*/
  71         "C_L1",                 /*21*/
  72         "R22",                  /*22*/
  73         "R23",                  /*23*/
  74         "R24",                  /*24*/
  75         "R25",                  /*25*/
  76         "R26",                  /*26*/
  77         "R27",                  /*27*/
  78         "R28",                  /*28*/
  79         "R29",                  /*29*/
  80         "R30",                  /*30*/
  81         "R31",                  /*31*/
  82 };
  83
  84 static const char * const bit_desc_ss[] = {
  85         "CONNECTION",           /*0*/
  86         "ENABLE",               /*1*/
  87         "SUSPEND",              /*2*/
  88         "OVER_CURRENT",         /*3*/
  89         "RESET",                /*4*/
  90         "L1",                   /*5*/
  91         "R6",                   /*6*/
  92         "R7",                   /*7*/
  93         "R8",                   /*8*/
  94         "POWER",                /*9*/
  95         "HIGHSPEED",            /*10*/
  96         "PORT_TEST",            /*11*/
  97         "INDICATOR",            /*12*/
  98         "R13",                  /*13*/
  99         "R14",                  /*14*/
 100         "R15",                  /*15*/
 101         "C_CONNECTION",         /*16*/
 102         "C_ENABLE",             /*17*/
 103         "C_SUSPEND",            /*18*/
 104         "C_OVER_CURRENT",       /*19*/
 105         "C_RESET",              /*20*/
 106         "C_BH_RESET",           /*21*/
 107         "C_LINK_STATE",         /*22*/
 108         "C_CONFIG_ERROR",       /*23*/
 109         "R24",                  /*24*/
 110         "R25",                  /*25*/
 111         "R26",                  /*26*/
 112         "R27",                  /*27*/
 113         "R28",                  /*28*/
 114         "R29",                  /*29*/
 115         "R30",                  /*30*/
 116         "R31",                  /*31*/
 117 };
 118
 119 static void dump_port_status_diff(u32 prev_status, u32 new_status, bool usb3)
 120 {
 121         int i = 0;
 122         u32 bit = 1;
 123         const char * const *desc = bit_desc;
 124
 125         if (usb3)
 126                 desc = bit_desc_ss;
 127
 128         pr_debug("status prev -> new: %08x -> %08x\n", prev_status, new_status);
 129         while (bit) {
 130                 u32 prev = prev_status & bit;
 131                 u32 new = new_status & bit;
 132                 char change;
 133
 134                 if (!prev && new)
 135                         change = '+';
 136                 else if (prev && !new)
 137                         change = '-';
 138                 else
 139                         change = ' ';
 140
 141                 if (prev || new) {
 142                         pr_debug(" %c%s\n", change, desc[i]);
 143
 144                         if (bit == 1) /* USB_PORT_STAT_CONNECTION */
 145                                 pr_debug(" %c%s\n", change, "USB_PORT_STAT_SPEED_5GBPS");
 146                 }
 147                 bit <<= 1;
 148                 i++;
 149         }
 150         pr_debug("\n");
 151 }
 152
 153 void rh_port_connect(struct vhci_device *vdev, enum usb_device_speed speed)
 154 {
 155         struct vhci_hcd *vhci_hcd = vdev_to_vhci_hcd(vdev);
 156         struct vhci *vhci = vhci_hcd->vhci;
 157         int             rhport = vdev->rhport;
 158         u32             status;
 159         unsigned long   flags;
 160
 161         usbip_dbg_vhci_rh("rh_port_connect %d\n", rhport);
 162
 163         spin_lock_irqsave(&vhci->lock, flags);
 164
 165         status = vhci_hcd->port_status[rhport];
 166
 167         status |= USB_PORT_STAT_CONNECTION | (1 << USB_PORT_FEAT_C_CONNECTION);
 168
 169         switch (speed) {
 170         case USB_SPEED_HIGH:
 171                 status |= USB_PORT_STAT_HIGH_SPEED;
 172                 break;
 173         case USB_SPEED_LOW:
 174                 status |= USB_PORT_STAT_LOW_SPEED;
 175                 break;
 176         default:
 177                 break;
 178         }
 179
 180         vhci_hcd->port_status[rhport] = status;
 181
 182         spin_unlock_irqrestore(&vhci->lock, flags);
 183
 184         usb_hcd_poll_rh_status(vhci_hcd_to_hcd(vhci_hcd));
 185 }
 186
 187 static void rh_port_disconnect(struct vhci_device *vdev)
 188 {
 189         struct vhci_hcd *vhci_hcd = vdev_to_vhci_hcd(vdev);
 190         struct vhci *vhci = vhci_hcd->vhci;
 191         int             rhport = vdev->rhport;
 192         u32             status;
 193         unsigned long   flags;
 194
 195         usbip_dbg_vhci_rh("rh_port_disconnect %d\n", rhport);
 196
 197         spin_lock_irqsave(&vhci->lock, flags);
 198
 199         status = vhci_hcd->port_status[rhport];
 200
 201         status &= ~USB_PORT_STAT_CONNECTION;
 202         status |= (1 << USB_PORT_FEAT_C_CONNECTION);
 203
 204         vhci_hcd->port_status[rhport] = status;
 205
 206         spin_unlock_irqrestore(&vhci->lock, flags);
 207         usb_hcd_poll_rh_status(vhci_hcd_to_hcd(vhci_hcd));
 208 }
 209
 210 #define PORT_C_MASK                             \
 211         ((USB_PORT_STAT_C_CONNECTION            \
 212           | USB_PORT_STAT_C_ENABLE              \
 213           | USB_PORT_STAT_C_SUSPEND             \
 214           | USB_PORT_STAT_C_OVERCURRENT         \
 215           | USB_PORT_STAT_C_RESET) << 16)
 216
 217 /*
 218  * Returns 0 if the status hasn't changed, or the number of bytes in buf.
 219  * Ports are 0-indexed from the HCD point of view,
 220  * and 1-indexed from the USB core pointer of view.
 221  *
 222  * @buf: a bitmap to show which port status has been changed.
 223  *  bit  0: reserved
 224  *  bit  1: the status of port 0 has been changed.
 225  *  bit  2: the status of port 1 has been changed.
 226  *  ...
 227  */
 228 static int vhci_hub_status(struct usb_hcd *hcd, char *buf)
 229 {
 230         struct vhci_hcd *vhci_hcd = hcd_to_vhci_hcd(hcd);
 231         struct vhci *vhci = vhci_hcd->vhci;
 232         int             retval = DIV_ROUND_UP(VHCI_HC_PORTS + 1, 8);
 233         int             rhport;
 234         int             changed = 0;
 235         unsigned long   flags;
 236
 237         memset(buf, 0, retval);
 238
 239         spin_lock_irqsave(&vhci->lock, flags);
 240         if (!HCD_HW_ACCESSIBLE(hcd)) {
 241                 usbip_dbg_vhci_rh("hw accessible flag not on?\n");
 242                 goto done;
 243         }
 244
 245         /* check pseudo status register for each port */
 246         for (rhport = 0; rhport < VHCI_HC_PORTS; rhport++) {
 247                 if ((vhci_hcd->port_status[rhport] & PORT_C_MASK)) {
 248                         /* The status of a port has been changed, */
 249                         usbip_dbg_vhci_rh("port %d status changed\n", rhport);
 250
 251                         buf[(rhport + 1) / 8] |= 1 << (rhport + 1) % 8;
 252                         changed = 1;
 253                 }
 254         }
 255
 256         if ((hcd->state == HC_STATE_SUSPENDED) && (changed == 1))
 257                 usb_hcd_resume_root_hub(hcd);
 258
 259 done:
 260         spin_unlock_irqrestore(&vhci->lock, flags);
 261         return changed ? retval : 0;
 262 }
 263
 264 /* usb 3.0 root hub device descriptor */
 265 static struct {
 266         struct usb_bos_descriptor bos;
 267         struct usb_ss_cap_descriptor ss_cap;
 268 } __packed usb3_bos_desc = {
 269
 270         .bos = {
 271                 .bLength                = USB_DT_BOS_SIZE,
 272                 .bDescriptorType        = USB_DT_BOS,
 273                 .wTotalLength           = cpu_to_le16(sizeof(usb3_bos_desc)),
 274                 .bNumDeviceCaps         = 1,
 275         },
 276         .ss_cap = {
 277                 .bLength                = USB_DT_USB_SS_CAP_SIZE,
 278                 .bDescriptorType        = USB_DT_DEVICE_CAPABILITY,
 279                 .bDevCapabilityType     = USB_SS_CAP_TYPE,
 280                 .wSpeedSupported        = cpu_to_le16(USB_5GBPS_OPERATION),
 281                 .bFunctionalitySupport  = ilog2(USB_5GBPS_OPERATION),
 282         },
 283 };
 284
 285 static inline void
 286 ss_hub_descriptor(struct usb_hub_descriptor *desc)
 287 {
 288         memset(desc, 0, sizeof *desc);
 289         desc->bDescriptorType = USB_DT_SS_HUB;
 290         desc->bDescLength = 12;
 291         desc->wHubCharacteristics = cpu_to_le16(
 292                 HUB_CHAR_INDV_PORT_LPSM | HUB_CHAR_COMMON_OCPM);
 293         desc->bNbrPorts = VHCI_HC_PORTS;
 294         desc->u.ss.bHubHdrDecLat = 0x04; /* Worst case: 0.4 micro sec*/
 295         desc->u.ss.DeviceRemovable = 0xffff;
 296 }
 297
 298 static inline void hub_descriptor(struct usb_hub_descriptor *desc)
 299 {
 300         int width;
 301
 302         memset(desc, 0, sizeof(*desc));
 303         desc->bDescriptorType = USB_DT_HUB;
 304         desc->wHubCharacteristics = cpu_to_le16(
 305                 HUB_CHAR_INDV_PORT_LPSM | HUB_CHAR_COMMON_OCPM);
 306
 307         desc->bNbrPorts = VHCI_HC_PORTS;
 308         BUILD_BUG_ON(VHCI_HC_PORTS > USB_MAXCHILDREN);
 309         width = desc->bNbrPorts / 8 + 1;
 310         desc->bDescLength = USB_DT_HUB_NONVAR_SIZE + 2 * width;
 311         memset(&desc->u.hs.DeviceRemovable[0], 0, width);
 312         memset(&desc->u.hs.DeviceRemovable[width], 0xff, width);
 313 }
 314
 315 static int vhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
 316                             u16 wIndex, char *buf, u16 wLength)
 317 {
 318         struct vhci_hcd *vhci_hcd;
 319         struct vhci     *vhci;
 320         int             retval = 0;
 321         int             rhport = -1;
 322         unsigned long   flags;
 323         bool invalid_rhport = false;
 324
 325         u32 prev_port_status[VHCI_HC_PORTS];
 326
 327         if (!HCD_HW_ACCESSIBLE(hcd))
 328                 return -ETIMEDOUT;
 329
 330         /*
 331          * NOTE:
 332          * wIndex (bits 0-7) shows the port number and begins from 1?
 333          */
 334         wIndex = ((__u8)(wIndex & 0x00ff));
 335         usbip_dbg_vhci_rh("typeReq %x wValue %x wIndex %x\n", typeReq, wValue,
 336                           wIndex);
 337
 338         /*
 339          * wIndex can be 0 for some request types (typeReq). rhport is
 340          * in valid range when wIndex >= 1 and < VHCI_HC_PORTS.
 341          *
 342          * Reference port_status[] only with valid rhport when
 343          * invalid_rhport is false.
 344          */
 345         if (wIndex < 1 || wIndex > VHCI_HC_PORTS) {
 346                 invalid_rhport = true;
 347                 if (wIndex > VHCI_HC_PORTS)
 348                         pr_err("invalid port number %d\n", wIndex);
 349         } else
 350                 rhport = wIndex - 1;
 351
 352         vhci_hcd = hcd_to_vhci_hcd(hcd);
 353         vhci = vhci_hcd->vhci;
 354
 355         spin_lock_irqsave(&vhci->lock, flags);
 356
 357         /* store old status and compare now and old later */
 358         if (usbip_dbg_flag_vhci_rh) {
 359                 if (!invalid_rhport)
 360                         memcpy(prev_port_status, vhci_hcd->port_status,
 361                                 sizeof(prev_port_status));
 362         }
 363
 364         switch (typeReq) {
 365         case ClearHubFeature:
 366                 usbip_dbg_vhci_rh(" ClearHubFeature\n");
 367                 break;
 368         case ClearPortFeature:
 369                 if (invalid_rhport) {
 370                         pr_err("invalid port number %d\n", wIndex);
 371                         goto error;
 372                 }
 373                 switch (wValue) {
 374                 case USB_PORT_FEAT_SUSPEND:
 375                         if (hcd->speed == HCD_USB3) {
 376                                 pr_err(" ClearPortFeature: USB_PORT_FEAT_SUSPEND req not "
 377                                        "supported for USB 3.0 roothub\n");
 378                                 goto error;
 379                         }
 380                         usbip_dbg_vhci_rh(
 381                                 " ClearPortFeature: USB_PORT_FEAT_SUSPEND\n");
 382                         if (vhci_hcd->port_status[rhport] & USB_PORT_STAT_SUSPEND) {
 383                                 /* 20msec signaling */
 384                                 vhci_hcd->resuming = 1;
 385                                 vhci_hcd->re_timeout = jiffies + msecs_to_jiffies(20);
 386                         }
 387                         break;
 388                 case USB_PORT_FEAT_POWER:
 389                         usbip_dbg_vhci_rh(
 390                                 " ClearPortFeature: USB_PORT_FEAT_POWER\n");
 391                         if (hcd->speed == HCD_USB3)
 392                                 vhci_hcd->port_status[rhport] &= ~USB_SS_PORT_STAT_POWER;
 393                         else
 394                                 vhci_hcd->port_status[rhport] &= ~USB_PORT_STAT_POWER;
 395                         break;
 396                 default:
 397                         usbip_dbg_vhci_rh(" ClearPortFeature: default %x\n",
 398                                           wValue);
 399                         if (wValue >= 32)
 400                                 goto error;
 401                         vhci_hcd->port_status[rhport] &= ~(1 << wValue);
 402                         break;
 403                 }
 404                 break;
 405         case GetHubDescriptor:
 406                 usbip_dbg_vhci_rh(" GetHubDescriptor\n");
 407                 if (hcd->speed == HCD_USB3 &&
 408                                 (wLength < USB_DT_SS_HUB_SIZE ||
 409                                  wValue != (USB_DT_SS_HUB << 8))) {
 410                         pr_err("Wrong hub descriptor type for USB 3.0 roothub.\n");
 411                         goto error;
 412                 }
 413                 if (hcd->speed == HCD_USB3)
 414                         ss_hub_descriptor((struct usb_hub_descriptor *) buf);
 415                 else
 416                         hub_descriptor((struct usb_hub_descriptor *) buf);
 417                 break;
 418         case DeviceRequest | USB_REQ_GET_DESCRIPTOR:
 419                 if (hcd->speed != HCD_USB3)
 420                         goto error;
 421
 422                 if ((wValue >> 8) != USB_DT_BOS)
 423                         goto error;
 424
 425                 memcpy(buf, &usb3_bos_desc, sizeof(usb3_bos_desc));
 426                 retval = sizeof(usb3_bos_desc);
 427                 break;
 428         case GetHubStatus:
 429                 usbip_dbg_vhci_rh(" GetHubStatus\n");
 430                 *(__le32 *) buf = cpu_to_le32(0);
 431                 break;
 432         case GetPortStatus:
 433                 usbip_dbg_vhci_rh(" GetPortStatus port %x\n", wIndex);
 434                 if (invalid_rhport) {
 435                         pr_err("invalid port number %d\n", wIndex);
 436                         retval = -EPIPE;
 437                         goto error;
 438                 }
 439
 440                 /* we do not care about resume. */
 441
 442                 /* whoever resets or resumes must GetPortStatus to
 443                  * complete it!!
 444                  */
 445                 if (vhci_hcd->resuming && time_after(jiffies, vhci_hcd->re_timeout)) {
 446                         vhci_hcd->port_status[rhport] |= (1 << USB_PORT_FEAT_C_SUSPEND);
 447                         vhci_hcd->port_status[rhport] &= ~(1 << USB_PORT_FEAT_SUSPEND);
 448                         vhci_hcd->resuming = 0;
 449                         vhci_hcd->re_timeout = 0;
 450                 }
 451
 452                 if ((vhci_hcd->port_status[rhport] & (1 << USB_PORT_FEAT_RESET)) !=
 453                     0 && time_after(jiffies, vhci_hcd->re_timeout)) {
 454                         vhci_hcd->port_status[rhport] |= (1 << USB_PORT_FEAT_C_RESET);
 455                         vhci_hcd->port_status[rhport] &= ~(1 << USB_PORT_FEAT_RESET);
 456                         vhci_hcd->re_timeout = 0;
 457
 458                         /*
 459                          * A few drivers do usb reset during probe when
 460                          * the device could be in VDEV_ST_USED state
 461                          */
 462                         if (vhci_hcd->vdev[rhport].ud.status ==
 463                                 VDEV_ST_NOTASSIGNED ||
 464                             vhci_hcd->vdev[rhport].ud.status ==
 465                                 VDEV_ST_USED) {
 466                                 usbip_dbg_vhci_rh(
 467                                         " enable rhport %d (status %u)\n",
 468                                         rhport,
 469                                         vhci_hcd->vdev[rhport].ud.status);
 470                                 vhci_hcd->port_status[rhport] |=
 471                                         USB_PORT_STAT_ENABLE;
 472                         }
 473
 474                         if (hcd->speed < HCD_USB3) {
 475                                 switch (vhci_hcd->vdev[rhport].speed) {
 476                                 case USB_SPEED_HIGH:
 477                                         vhci_hcd->port_status[rhport] |=
 478                                               USB_PORT_STAT_HIGH_SPEED;
 479                                         break;
 480                                 case USB_SPEED_LOW:
 481                                         vhci_hcd->port_status[rhport] |=
 482                                                 USB_PORT_STAT_LOW_SPEED;
 483                                         break;
 484                                 default:
 485                                         pr_err("vhci_device speed not set\n");
 486                                         break;
 487                                 }
 488                         }
 489                 }
 490                 ((__le16 *) buf)[0] = cpu_to_le16(vhci_hcd->port_status[rhport]);
 491                 ((__le16 *) buf)[1] =
 492                         cpu_to_le16(vhci_hcd->port_status[rhport] >> 16);
 493
 494                 usbip_dbg_vhci_rh(" GetPortStatus bye %x %x\n", ((u16 *)buf)[0],
 495                                   ((u16 *)buf)[1]);
 496                 break;
 497         case SetHubFeature:
 498                 usbip_dbg_vhci_rh(" SetHubFeature\n");
 499                 retval = -EPIPE;
 500                 break;
 501         case SetPortFeature:
 502                 switch (wValue) {
 503                 case USB_PORT_FEAT_LINK_STATE:
 504                         usbip_dbg_vhci_rh(
 505                                 " SetPortFeature: USB_PORT_FEAT_LINK_STATE\n");
 506                         if (hcd->speed != HCD_USB3) {
 507                                 pr_err("USB_PORT_FEAT_LINK_STATE req not "
 508                                        "supported for USB 2.0 roothub\n");
 509                                 goto error;
 510                         }
 511                         /*
 512                          * Since this is dummy we don't have an actual link so
 513                          * there is nothing to do for the SET_LINK_STATE cmd
 514                          */
 515                         break;
 516                 case USB_PORT_FEAT_U1_TIMEOUT:
 517                         usbip_dbg_vhci_rh(
 518                                 " SetPortFeature: USB_PORT_FEAT_U1_TIMEOUT\n");
 519                         fallthrough;
 520                 case USB_PORT_FEAT_U2_TIMEOUT:
 521                         usbip_dbg_vhci_rh(
 522                                 " SetPortFeature: USB_PORT_FEAT_U2_TIMEOUT\n");
 523                         /* TODO: add suspend/resume support! */
 524                         if (hcd->speed != HCD_USB3) {
 525                                 pr_err("USB_PORT_FEAT_U1/2_TIMEOUT req not "
 526                                        "supported for USB 2.0 roothub\n");
 527                                 goto error;
 528                         }
 529                         break;
 530                 case USB_PORT_FEAT_SUSPEND:
 531                         usbip_dbg_vhci_rh(
 532                                 " SetPortFeature: USB_PORT_FEAT_SUSPEND\n");
 533                         /* Applicable only for USB2.0 hub */
 534                         if (hcd->speed == HCD_USB3) {
 535                                 pr_err("USB_PORT_FEAT_SUSPEND req not "
 536                                        "supported for USB 3.0 roothub\n");
 537                                 goto error;
 538                         }
 539
 540                         if (invalid_rhport) {
 541                                 pr_err("invalid port number %d\n", wIndex);
 542                                 goto error;
 543                         }
 544
 545                         vhci_hcd->port_status[rhport] |= USB_PORT_STAT_SUSPEND;
 546                         break;
 547                 case USB_PORT_FEAT_POWER:
 548                         usbip_dbg_vhci_rh(
 549                                 " SetPortFeature: USB_PORT_FEAT_POWER\n");
 550                         if (invalid_rhport) {
 551                                 pr_err("invalid port number %d\n", wIndex);
 552                                 goto error;
 553                         }
 554                         if (hcd->speed == HCD_USB3)
 555                                 vhci_hcd->port_status[rhport] |= USB_SS_PORT_STAT_POWER;
 556                         else
 557                                 vhci_hcd->port_status[rhport] |= USB_PORT_STAT_POWER;
 558                         break;
 559                 case USB_PORT_FEAT_BH_PORT_RESET:
 560                         usbip_dbg_vhci_rh(
 561                                 " SetPortFeature: USB_PORT_FEAT_BH_PORT_RESET\n");
 562                         if (invalid_rhport) {
 563                                 pr_err("invalid port number %d\n", wIndex);
 564                                 goto error;
 565                         }
 566                         /* Applicable only for USB3.0 hub */
 567                         if (hcd->speed != HCD_USB3) {
 568                                 pr_err("USB_PORT_FEAT_BH_PORT_RESET req not "
 569                                        "supported for USB 2.0 roothub\n");
 570                                 goto error;
 571                         }
 572                         fallthrough;
 573                 case USB_PORT_FEAT_RESET:
 574                         usbip_dbg_vhci_rh(
 575                                 " SetPortFeature: USB_PORT_FEAT_RESET\n");
 576                         if (invalid_rhport) {
 577                                 pr_err("invalid port number %d\n", wIndex);
 578                                 goto error;
 579                         }
 580                         /* if it's already enabled, disable */
 581                         if (hcd->speed == HCD_USB3) {
 582                                 vhci_hcd->port_status[rhport] = 0;
 583                                 vhci_hcd->port_status[rhport] =
 584                                         (USB_SS_PORT_STAT_POWER |
 585                                          USB_PORT_STAT_CONNECTION |
 586                                          USB_PORT_STAT_RESET);
 587                         } else if (vhci_hcd->port_status[rhport] & USB_PORT_STAT_ENABLE) {
 588                                 vhci_hcd->port_status[rhport] &= ~(USB_PORT_STAT_ENABLE
 589                                         | USB_PORT_STAT_LOW_SPEED
 590                                         | USB_PORT_STAT_HIGH_SPEED);
 591                         }
 592
 593                         /* 50msec reset signaling */
 594                         vhci_hcd->re_timeout = jiffies + msecs_to_jiffies(50);
 595                         fallthrough;
 596                 default:
 597                         usbip_dbg_vhci_rh(" SetPortFeature: default %d\n",
 598                                           wValue);
 599                         if (invalid_rhport) {
 600                                 pr_err("invalid port number %d\n", wIndex);
 601                                 goto error;
 602                         }
 603                         if (wValue >= 32)
 604                                 goto error;
 605                         if (hcd->speed == HCD_USB3) {
 606                                 if ((vhci_hcd->port_status[rhport] &
 607                                      USB_SS_PORT_STAT_POWER) != 0) {
 608                                         vhci_hcd->port_status[rhport] |= (1 << wValue);
 609                                 }
 610                         } else
 611                                 if ((vhci_hcd->port_status[rhport] &
 612                                      USB_PORT_STAT_POWER) != 0) {
 613                                         vhci_hcd->port_status[rhport] |= (1 << wValue);
 614                                 }
 615                 }
 616                 break;
 617         case GetPortErrorCount:
 618                 usbip_dbg_vhci_rh(" GetPortErrorCount\n");
 619                 if (hcd->speed != HCD_USB3) {
 620                         pr_err("GetPortErrorCount req not "
 621                                "supported for USB 2.0 roothub\n");
 622                         goto error;
 623                 }
 624                 /* We'll always return 0 since this is a dummy hub */
 625                 *(__le32 *) buf = cpu_to_le32(0);
 626                 break;
 627         case SetHubDepth:
 628                 usbip_dbg_vhci_rh(" SetHubDepth\n");
 629                 if (hcd->speed != HCD_USB3) {
 630                         pr_err("SetHubDepth req not supported for "
 631                                "USB 2.0 roothub\n");
 632                         goto error;
 633                 }
 634                 break;
 635         default:
 636                 pr_err("default hub control req: %04x v%04x i%04x l%d\n",
 637                         typeReq, wValue, wIndex, wLength);
 638 error:
 639                 /* "protocol stall" on error */
 640                 retval = -EPIPE;
 641         }
 642
 643         if (usbip_dbg_flag_vhci_rh) {
 644                 pr_debug("port %d\n", rhport);
 645                 /* Only dump valid port status */
 646                 if (!invalid_rhport) {
 647                         dump_port_status_diff(prev_port_status[rhport],
 648                                               vhci_hcd->port_status[rhport],
 649                                               hcd->speed == HCD_USB3);
 650                 }
 651         }
 652         usbip_dbg_vhci_rh(" bye\n");
 653
 654         spin_unlock_irqrestore(&vhci->lock, flags);
 655
 656         if (!invalid_rhport &&
 657             (vhci_hcd->port_status[rhport] & PORT_C_MASK) != 0) {
 658                 usb_hcd_poll_rh_status(hcd);
 659         }
 660
 661         return retval;
 662 }
 663
 664 static void vhci_tx_urb(struct urb *urb, struct vhci_device *vdev)
 665 {
 666         struct vhci_priv *priv;
 667         struct vhci_hcd *vhci_hcd = vdev_to_vhci_hcd(vdev);
 668         unsigned long flags;
 669
 670         priv = kzalloc(sizeof(struct vhci_priv), GFP_ATOMIC);
 671         if (!priv) {
 672                 usbip_event_add(&vdev->ud, VDEV_EVENT_ERROR_MALLOC);
 673                 return;
 674         }
 675
 676         spin_lock_irqsave(&vdev->priv_lock, flags);
 677
 678         priv->seqnum = atomic_inc_return(&vhci_hcd->seqnum);
 679         if (priv->seqnum == 0xffff)
 680                 dev_info(&urb->dev->dev, "seqnum max\n");
 681
 682         priv->vdev = vdev;
 683         priv->urb = urb;
 684
 685         urb->hcpriv = (void *) priv;
 686
 687         list_add_tail(&priv->list, &vdev->priv_tx);
 688
 689         wake_up(&vdev->waitq_tx);
 690         spin_unlock_irqrestore(&vdev->priv_lock, flags);
 691 }
 692
 693 static int vhci_urb_enqueue(struct usb_hcd *hcd, struct urb *urb, gfp_t mem_flags)
 694 {
 695         struct vhci_hcd *vhci_hcd = hcd_to_vhci_hcd(hcd);
 696         struct vhci *vhci = vhci_hcd->vhci;
 697         struct device *dev = &urb->dev->dev;
 698         u8 portnum = urb->dev->portnum;
 699         int ret = 0;
 700         struct vhci_device *vdev;
 701         unsigned long flags;
 702
 703         if (portnum > VHCI_HC_PORTS) {
 704                 pr_err("invalid port number %d\n", portnum);
 705                 return -ENODEV;
 706         }
 707         vdev = &vhci_hcd->vdev[portnum-1];
 708
 709         if (!urb->transfer_buffer && !urb->num_sgs &&
 710              urb->transfer_buffer_length) {
 711                 dev_dbg(dev, "Null URB transfer buffer\n");
 712                 return -EINVAL;
 713         }
 714
 715         spin_lock_irqsave(&vhci->lock, flags);
 716
 717         if (urb->status != -EINPROGRESS) {
 718                 dev_err(dev, "URB already unlinked!, status %d\n", urb->status);
 719                 spin_unlock_irqrestore(&vhci->lock, flags);
 720                 return urb->status;
 721         }
 722
 723         /* refuse enqueue for dead connection */
 724         spin_lock(&vdev->ud.lock);
 725         if (vdev->ud.status == VDEV_ST_NULL ||
 726             vdev->ud.status == VDEV_ST_ERROR) {
 727                 dev_err(dev, "enqueue for inactive port %d\n", vdev->rhport);
 728                 spin_unlock(&vdev->ud.lock);
 729                 spin_unlock_irqrestore(&vhci->lock, flags);
 730                 return -ENODEV;
 731         }
 732         spin_unlock(&vdev->ud.lock);
 733
 734         ret = usb_hcd_link_urb_to_ep(hcd, urb);
 735         if (ret)
 736                 goto no_need_unlink;
 737
 738         /*
 739          * The enumeration process is as follows;
 740          *
 741          *  1. Get_Descriptor request to DevAddrs(0) EndPoint(0)
 742          *     to get max packet length of default pipe
 743          *
 744          *  2. Set_Address request to DevAddr(0) EndPoint(0)
 745          *
 746          */
 747         if (usb_pipedevice(urb->pipe) == 0) {
 748                 __u8 type = usb_pipetype(urb->pipe);
 749                 struct usb_ctrlrequest *ctrlreq =
 750                         (struct usb_ctrlrequest *) urb->setup_packet;
 751
 752                 if (type != PIPE_CONTROL || !ctrlreq) {
 753                         dev_err(dev, "invalid request to devnum 0\n");
 754                         ret = -EINVAL;
 755                         goto no_need_xmit;
 756                 }
 757
 758                 switch (ctrlreq->bRequest) {
 759                 case USB_REQ_SET_ADDRESS:
 760                         /* set_address may come when a device is reset */
 761                         dev_info(dev, "SetAddress Request (%d) to port %d\n",
 762                                  ctrlreq->wValue, vdev->rhport);
 763
 764                         usb_put_dev(vdev->udev);
 765                         vdev->udev = usb_get_dev(urb->dev);
 766
 767                         spin_lock(&vdev->ud.lock);
 768                         vdev->ud.status = VDEV_ST_USED;
 769                         spin_unlock(&vdev->ud.lock);
 770
 771                         if (urb->status == -EINPROGRESS) {
 772                                 /* This request is successfully completed. */
 773                                 /* If not -EINPROGRESS, possibly unlinked. */
 774                                 urb->status = 0;
 775                         }
 776
 777                         goto no_need_xmit;
 778
 779                 case USB_REQ_GET_DESCRIPTOR:
 780                         if (ctrlreq->wValue == cpu_to_le16(USB_DT_DEVICE << 8))
 781                                 usbip_dbg_vhci_hc(
 782                                         "Not yet?:Get_Descriptor to device 0 (get max pipe size)\n");
 783
 784                         usb_put_dev(vdev->udev);
 785                         vdev->udev = usb_get_dev(urb->dev);
 786                         goto out;
 787
 788                 default:
 789                         /* NOT REACHED */
 790                         dev_err(dev,
 791                                 "invalid request to devnum 0 bRequest %u, wValue %u\n",
 792                                 ctrlreq->bRequest,
 793                                 ctrlreq->wValue);
 794                         ret =  -EINVAL;
 795                         goto no_need_xmit;
 796                 }
 797
 798         }
 799
 800 out:
 801         vhci_tx_urb(urb, vdev);
 802         spin_unlock_irqrestore(&vhci->lock, flags);
 803
 804         return 0;
 805
 806 no_need_xmit:
 807         usb_hcd_unlink_urb_from_ep(hcd, urb);
 808 no_need_unlink:
 809         spin_unlock_irqrestore(&vhci->lock, flags);
 810         if (!ret) {
 811                 /* usb_hcd_giveback_urb() should be called with
 812                  * irqs disabled
 813                  */
 814                 local_irq_disable();
 815                 usb_hcd_giveback_urb(hcd, urb, urb->status);
 816                 local_irq_enable();
 817         }
 818         return ret;
 819 }
 820
 821 /*
 822  * vhci_rx gives back the urb after receiving the reply of the urb.  If an
 823  * unlink pdu is sent or not, vhci_rx receives a normal return pdu and gives
 824  * back its urb. For the driver unlinking the urb, the content of the urb is
 825  * not important, but the calling to its completion handler is important; the
 826  * completion of unlinking is notified by the completion handler.
 827  *
 828  *
 829  * CLIENT SIDE
 830  *
 831  * - When vhci_hcd receives RET_SUBMIT,
 832  *
 833  *      - case 1a). the urb of the pdu is not unlinking.
 834  *              - normal case
 835  *              => just give back the urb
 836  *
 837  *      - case 1b). the urb of the pdu is unlinking.
 838  *              - usbip.ko will return a reply of the unlinking request.
 839  *              => give back the urb now and go to case 2b).
 840  *
 841  * - When vhci_hcd receives RET_UNLINK,
 842  *
 843  *      - case 2a). a submit request is still pending in vhci_hcd.
 844  *              - urb was really pending in usbip.ko and urb_unlink_urb() was
 845  *                completed there.
 846  *              => free a pending submit request
 847  *              => notify unlink completeness by giving back the urb
 848  *
 849  *      - case 2b). a submit request is *not* pending in vhci_hcd.
 850  *              - urb was already given back to the core driver.
 851  *              => do not give back the urb
 852  *
 853  *
 854  * SERVER SIDE
 855  *
 856  * - When usbip receives CMD_UNLINK,
 857  *
 858  *      - case 3a). the urb of the unlink request is now in submission.
 859  *              => do usb_unlink_urb().
 860  *              => after the unlink is completed, send RET_UNLINK.
 861  *
 862  *      - case 3b). the urb of the unlink request is not in submission.
 863  *              - may be already completed or never be received
 864  *              => send RET_UNLINK
 865  *
 866  */
 867 static int vhci_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status)
 868 {
 869         struct vhci_hcd *vhci_hcd = hcd_to_vhci_hcd(hcd);
 870         struct vhci *vhci = vhci_hcd->vhci;
 871         struct vhci_priv *priv;
 872         struct vhci_device *vdev;
 873         unsigned long flags;
 874
 875         spin_lock_irqsave(&vhci->lock, flags);
 876
 877         priv = urb->hcpriv;
 878         if (!priv) {
 879                 /* URB was never linked! or will be soon given back by
 880                  * vhci_rx. */
 881                 spin_unlock_irqrestore(&vhci->lock, flags);
 882                 return -EIDRM;
 883         }
 884
 885         {
 886                 int ret = 0;
 887
 888                 ret = usb_hcd_check_unlink_urb(hcd, urb, status);
 889                 if (ret) {
 890                         spin_unlock_irqrestore(&vhci->lock, flags);
 891                         return ret;
 892                 }
 893         }
 894
 895          /* send unlink request here? */
 896         vdev = priv->vdev;
 897
 898         if (!vdev->ud.tcp_socket) {
 899                 /* tcp connection is closed */
 900                 spin_lock(&vdev->priv_lock);
 901
 902                 list_del(&priv->list);
 903                 kfree(priv);
 904                 urb->hcpriv = NULL;
 905
 906                 spin_unlock(&vdev->priv_lock);
 907
 908                 /*
 909                  * If tcp connection is alive, we have sent CMD_UNLINK.
 910                  * vhci_rx will receive RET_UNLINK and give back the URB.
 911                  * Otherwise, we give back it here.
 912                  */
 913                 usb_hcd_unlink_urb_from_ep(hcd, urb);
 914
 915                 spin_unlock_irqrestore(&vhci->lock, flags);
 916                 usb_hcd_giveback_urb(hcd, urb, urb->status);
 917                 spin_lock_irqsave(&vhci->lock, flags);
 918
 919         } else {
 920                 /* tcp connection is alive */
 921                 struct vhci_unlink *unlink;
 922
 923                 spin_lock(&vdev->priv_lock);
 924
 925                 /* setup CMD_UNLINK pdu */
 926                 unlink = kzalloc(sizeof(struct vhci_unlink), GFP_ATOMIC);
 927                 if (!unlink) {
 928                         spin_unlock(&vdev->priv_lock);
 929                         spin_unlock_irqrestore(&vhci->lock, flags);
 930                         usbip_event_add(&vdev->ud, VDEV_EVENT_ERROR_MALLOC);
 931                         return -ENOMEM;
 932                 }
 933
 934                 unlink->seqnum = atomic_inc_return(&vhci_hcd->seqnum);
 935                 if (unlink->seqnum == 0xffff)
 936                         pr_info("seqnum max\n");
 937
 938                 unlink->unlink_seqnum = priv->seqnum;
 939
 940                 /* send cmd_unlink and try to cancel the pending URB in the
 941                  * peer */
 942                 list_add_tail(&unlink->list, &vdev->unlink_tx);
 943                 wake_up(&vdev->waitq_tx);
 944
 945                 spin_unlock(&vdev->priv_lock);
 946         }
 947
 948         spin_unlock_irqrestore(&vhci->lock, flags);
 949
 950         usbip_dbg_vhci_hc("leave\n");
 951         return 0;
 952 }
 953
 954 static void vhci_cleanup_unlink_list(struct vhci_device *vdev,
 955                 struct list_head *unlink_list)
 956 {
 957         struct vhci_hcd *vhci_hcd = vdev_to_vhci_hcd(vdev);
 958         struct usb_hcd *hcd = vhci_hcd_to_hcd(vhci_hcd);
 959         struct vhci *vhci = vhci_hcd->vhci;
 960         struct vhci_unlink *unlink, *tmp;
 961         unsigned long flags;
 962
 963         spin_lock_irqsave(&vhci->lock, flags);
 964         spin_lock(&vdev->priv_lock);
 965
 966         list_for_each_entry_safe(unlink, tmp, unlink_list, list) {
 967                 struct urb *urb;
 968
 969                 urb = pickup_urb_and_free_priv(vdev, unlink->unlink_seqnum);
 970                 if (!urb) {
 971                         list_del(&unlink->list);
 972                         kfree(unlink);
 973                         continue;
 974                 }
 975
 976                 urb->status = -ENODEV;
 977
 978                 usb_hcd_unlink_urb_from_ep(hcd, urb);
 979
 980                 list_del(&unlink->list);
 981
 982                 spin_unlock(&vdev->priv_lock);
 983                 spin_unlock_irqrestore(&vhci->lock, flags);
 984
 985                 usb_hcd_giveback_urb(hcd, urb, urb->status);
 986
 987                 spin_lock_irqsave(&vhci->lock, flags);
 988                 spin_lock(&vdev->priv_lock);
 989
 990                 kfree(unlink);
 991         }
 992
 993         spin_unlock(&vdev->priv_lock);
 994         spin_unlock_irqrestore(&vhci->lock, flags);
 995 }
 996
 997 static void vhci_device_unlink_cleanup(struct vhci_device *vdev)
 998 {
 999         /* give back URB of unsent unlink request */
1000         vhci_cleanup_unlink_list(vdev, &vdev->unlink_tx);
1001
1002         /* give back URB of unanswered unlink request */
1003         vhci_cleanup_unlink_list(vdev, &vdev->unlink_rx);
1004 }
1005
1006 /*
1007  * The important thing is that only one context begins cleanup.
1008  * This is why error handling and cleanup become simple.
1009  * We do not want to consider race condition as possible.
1010  */
1011 static void vhci_shutdown_connection(struct usbip_device *ud)
1012 {
1013         struct vhci_device *vdev = container_of(ud, struct vhci_device, ud);
1014
1015         /* need this? see stub_dev.c */
1016         if (ud->tcp_socket) {
1017                 pr_debug("shutdown tcp_socket %d\n", ud->sockfd);
1018                 kernel_sock_shutdown(ud->tcp_socket, SHUT_RDWR);
1019         }
1020
1021         /* kill threads related to this sdev */
1022         if (vdev->ud.tcp_rx) {
1023                 kthread_stop_put(vdev->ud.tcp_rx);
1024                 vdev->ud.tcp_rx = NULL;
1025         }
1026         if (vdev->ud.tcp_tx) {
1027                 kthread_stop_put(vdev->ud.tcp_tx);
1028                 vdev->ud.tcp_tx = NULL;
1029         }
1030         pr_info("stop threads\n");
1031
1032         /* active connection is closed */
1033         if (vdev->ud.tcp_socket) {
1034                 sockfd_put(vdev->ud.tcp_socket);
1035                 vdev->ud.tcp_socket = NULL;
1036                 vdev->ud.sockfd = -1;
1037         }
1038         pr_info("release socket\n");
1039
1040         vhci_device_unlink_cleanup(vdev);
1041
1042         /*
1043          * rh_port_disconnect() is a trigger of ...
1044          *   usb_disable_device():
1045          *      disable all the endpoints for a USB device.
1046          *   usb_disable_endpoint():
1047          *      disable endpoints. pending urbs are unlinked(dequeued).
1048          *
1049          * NOTE: After calling rh_port_disconnect(), the USB device drivers of a
1050          * detached device should release used urbs in a cleanup function (i.e.
1051          * xxx_disconnect()). Therefore, vhci_hcd does not need to release
1052          * pushed urbs and their private data in this function.
1053          *
1054          * NOTE: vhci_dequeue() must be considered carefully. When shutting down
1055          * a connection, vhci_shutdown_connection() expects vhci_dequeue()
1056          * gives back pushed urbs and frees their private data by request of
1057          * the cleanup function of a USB driver. When unlinking a urb with an
1058          * active connection, vhci_dequeue() does not give back the urb which
1059          * is actually given back by vhci_rx after receiving its return pdu.
1060          *
1061          */
1062         rh_port_disconnect(vdev);
1063
1064         pr_info("disconnect device\n");
1065 }
1066
1067 static void vhci_device_reset(struct usbip_device *ud)
1068 {
1069         struct vhci_device *vdev = container_of(ud, struct vhci_device, ud);
1070         unsigned long flags;
1071
1072         spin_lock_irqsave(&ud->lock, flags);
1073
1074         vdev->speed  = 0;
1075         vdev->devid  = 0;
1076
1077         usb_put_dev(vdev->udev);
1078         vdev->udev = NULL;
1079
1080         if (ud->tcp_socket) {
1081                 sockfd_put(ud->tcp_socket);
1082                 ud->tcp_socket = NULL;
1083                 ud->sockfd = -1;
1084         }
1085         ud->status = VDEV_ST_NULL;
1086
1087         spin_unlock_irqrestore(&ud->lock, flags);
1088 }
1089
1090 static void vhci_device_unusable(struct usbip_device *ud)
1091 {
1092         unsigned long flags;
1093
1094         spin_lock_irqsave(&ud->lock, flags);
1095         ud->status = VDEV_ST_ERROR;
1096         spin_unlock_irqrestore(&ud->lock, flags);
1097 }
1098
1099 static void vhci_device_init(struct vhci_device *vdev)
1100 {
1101         memset(vdev, 0, sizeof(struct vhci_device));
1102
1103         vdev->ud.side   = USBIP_VHCI;
1104         vdev->ud.status = VDEV_ST_NULL;
1105         spin_lock_init(&vdev->ud.lock);
1106         mutex_init(&vdev->ud.sysfs_lock);
1107
1108         INIT_LIST_HEAD(&vdev->priv_rx);
1109         INIT_LIST_HEAD(&vdev->priv_tx);
1110         INIT_LIST_HEAD(&vdev->unlink_tx);
1111         INIT_LIST_HEAD(&vdev->unlink_rx);
1112         spin_lock_init(&vdev->priv_lock);
1113
1114         init_waitqueue_head(&vdev->waitq_tx);
1115
1116         vdev->ud.eh_ops.shutdown = vhci_shutdown_connection;
1117         vdev->ud.eh_ops.reset = vhci_device_reset;
1118         vdev->ud.eh_ops.unusable = vhci_device_unusable;
1119
1120         usbip_start_eh(&vdev->ud);
1121 }
1122
1123 static int hcd_name_to_id(const char *name)
1124 {
1125         char *c;
1126         long val;
1127         int ret;
1128
1129         c = strchr(name, '.');
1130         if (c == NULL)
1131                 return 0;
1132
1133         ret = kstrtol(c+1, 10, &val);
1134         if (ret < 0)
1135                 return ret;
1136
1137         return val;
1138 }
1139
1140 static int vhci_setup(struct usb_hcd *hcd)
1141 {
1142         struct vhci *vhci = *((void **)dev_get_platdata(hcd->self.controller));
1143         if (usb_hcd_is_primary_hcd(hcd)) {
1144                 vhci->vhci_hcd_hs = hcd_to_vhci_hcd(hcd);
1145                 vhci->vhci_hcd_hs->vhci = vhci;
1146                 /*
1147                  * Mark the first roothub as being USB 2.0.
1148                  * The USB 3.0 roothub will be registered later by
1149                  * vhci_hcd_probe()
1150                  */
1151                 hcd->speed = HCD_USB2;
1152                 hcd->self.root_hub->speed = USB_SPEED_HIGH;
1153         } else {
1154                 vhci->vhci_hcd_ss = hcd_to_vhci_hcd(hcd);
1155                 vhci->vhci_hcd_ss->vhci = vhci;
1156                 hcd->speed = HCD_USB3;
1157                 hcd->self.root_hub->speed = USB_SPEED_SUPER;
1158         }
1159
1160         /*
1161          * Support SG.
1162          * sg_tablesize is an arbitrary value to alleviate memory pressure
1163          * on the host.
1164          */
1165         hcd->self.sg_tablesize = 32;
1166         hcd->self.no_sg_constraint = 1;
1167
1168         return 0;
1169 }
1170
1171 static int vhci_start(struct usb_hcd *hcd)
1172 {
1173         struct vhci_hcd *vhci_hcd = hcd_to_vhci_hcd(hcd);
1174         int id, rhport;
1175         int err;
1176
1177         usbip_dbg_vhci_hc("enter vhci_start\n");
1178
1179         if (usb_hcd_is_primary_hcd(hcd))
1180                 spin_lock_init(&vhci_hcd->vhci->lock);
1181
1182         /* initialize private data of usb_hcd */
1183
1184         for (rhport = 0; rhport < VHCI_HC_PORTS; rhport++) {
1185                 struct vhci_device *vdev = &vhci_hcd->vdev[rhport];
1186
1187                 vhci_device_init(vdev);
1188                 vdev->rhport = rhport;
1189         }
1190
1191         atomic_set(&vhci_hcd->seqnum, 0);
1192
1193         hcd->power_budget = 0; /* no limit */
1194         hcd->uses_new_polling = 1;
1195
1196 #ifdef CONFIG_USB_OTG
1197         hcd->self.otg_port = 1;
1198 #endif
1199
1200         id = hcd_name_to_id(hcd_name(hcd));
1201         if (id < 0) {
1202                 pr_err("invalid vhci name %s\n", hcd_name(hcd));
1203                 return -EINVAL;
1204         }
1205
1206         /* vhci_hcd is now ready to be controlled through sysfs */
1207         if (id == 0 && usb_hcd_is_primary_hcd(hcd)) {
1208                 err = vhci_init_attr_group();
1209                 if (err) {
1210                         dev_err(hcd_dev(hcd), "init attr group failed, err = %d\n", err);
1211                         return err;
1212                 }
1213                 err = sysfs_create_group(&hcd_dev(hcd)->kobj, &vhci_attr_group);
1214                 if (err) {
1215                         dev_err(hcd_dev(hcd), "create sysfs files failed, err = %d\n", err);
1216                         vhci_finish_attr_group();
1217                         return err;
1218                 }
1219                 pr_info("created sysfs %s\n", hcd_name(hcd));
1220         }
1221
1222         return 0;
1223 }
1224
1225 static void vhci_stop(struct usb_hcd *hcd)
1226 {
1227         struct vhci_hcd *vhci_hcd = hcd_to_vhci_hcd(hcd);
1228         int id, rhport;
1229
1230         usbip_dbg_vhci_hc("stop VHCI controller\n");
1231
1232         /* 1. remove the userland interface of vhci_hcd */
1233         id = hcd_name_to_id(hcd_name(hcd));
1234         if (id == 0 && usb_hcd_is_primary_hcd(hcd)) {
1235                 sysfs_remove_group(&hcd_dev(hcd)->kobj, &vhci_attr_group);
1236                 vhci_finish_attr_group();
1237         }
1238
1239         /* 2. shutdown all the ports of vhci_hcd */
1240         for (rhport = 0; rhport < VHCI_HC_PORTS; rhport++) {
1241                 struct vhci_device *vdev = &vhci_hcd->vdev[rhport];
1242
1243                 usbip_event_add(&vdev->ud, VDEV_EVENT_REMOVED);
1244                 usbip_stop_eh(&vdev->ud);
1245         }
1246 }
1247
1248 static int vhci_get_frame_number(struct usb_hcd *hcd)
1249 {
1250         dev_err_ratelimited(&hcd->self.root_hub->dev, "Not yet implemented\n");
1251         return 0;
1252 }
1253
1254 #ifdef CONFIG_PM
1255
1256 /* FIXME: suspend/resume */
1257 static int vhci_bus_suspend(struct usb_hcd *hcd)
1258 {
1259         struct vhci *vhci = *((void **)dev_get_platdata(hcd->self.controller));
1260         unsigned long flags;
1261
1262         dev_dbg(&hcd->self.root_hub->dev, "%s\n", __func__);
1263
1264         spin_lock_irqsave(&vhci->lock, flags);
1265         hcd->state = HC_STATE_SUSPENDED;
1266         spin_unlock_irqrestore(&vhci->lock, flags);
1267
1268         return 0;
1269 }
1270
1271 static int vhci_bus_resume(struct usb_hcd *hcd)
1272 {
1273         struct vhci *vhci = *((void **)dev_get_platdata(hcd->self.controller));
1274         int rc = 0;
1275         unsigned long flags;
1276
1277         dev_dbg(&hcd->self.root_hub->dev, "%s\n", __func__);
1278
1279         spin_lock_irqsave(&vhci->lock, flags);
1280         if (!HCD_HW_ACCESSIBLE(hcd))
1281                 rc = -ESHUTDOWN;
1282         else
1283                 hcd->state = HC_STATE_RUNNING;
1284         spin_unlock_irqrestore(&vhci->lock, flags);
1285
1286         return rc;
1287 }
1288
1289 #else
1290
1291 #define vhci_bus_suspend      NULL
1292 #define vhci_bus_resume       NULL
1293 #endif
1294
1295 /* Change a group of bulk endpoints to support multiple stream IDs */
1296 static int vhci_alloc_streams(struct usb_hcd *hcd, struct usb_device *udev,
1297         struct usb_host_endpoint **eps, unsigned int num_eps,
1298         unsigned int num_streams, gfp_t mem_flags)
1299 {
1300         dev_dbg(&hcd->self.root_hub->dev, "vhci_alloc_streams not implemented\n");
1301         return 0;
1302 }
1303
1304 /* Reverts a group of bulk endpoints back to not using stream IDs. */
1305 static int vhci_free_streams(struct usb_hcd *hcd, struct usb_device *udev,
1306         struct usb_host_endpoint **eps, unsigned int num_eps,
1307         gfp_t mem_flags)
1308 {
1309         dev_dbg(&hcd->self.root_hub->dev, "vhci_free_streams not implemented\n");
1310         return 0;
1311 }
1312
1313 static const struct hc_driver vhci_hc_driver = {
1314         .description    = driver_name,
1315         .product_desc   = driver_desc,
1316         .hcd_priv_size  = sizeof(struct vhci_hcd),
1317
1318         .flags          = HCD_USB3 | HCD_SHARED,
1319
1320         .reset          = vhci_setup,
1321         .start          = vhci_start,
1322         .stop           = vhci_stop,
1323
1324         .urb_enqueue    = vhci_urb_enqueue,
1325         .urb_dequeue    = vhci_urb_dequeue,
1326
1327         .get_frame_number = vhci_get_frame_number,
1328
1329         .hub_status_data = vhci_hub_status,
1330         .hub_control    = vhci_hub_control,
1331         .bus_suspend    = vhci_bus_suspend,
1332         .bus_resume     = vhci_bus_resume,
1333
1334         .alloc_streams  = vhci_alloc_streams,
1335         .free_streams   = vhci_free_streams,
1336 };
1337
1338 static int vhci_hcd_probe(struct platform_device *pdev)
1339 {
1340         struct vhci             *vhci = *((void **)dev_get_platdata(&pdev->dev));
1341         struct usb_hcd          *hcd_hs;
1342         struct usb_hcd          *hcd_ss;
1343         int                     ret;
1344
1345         usbip_dbg_vhci_hc("name %s id %d\n", pdev->name, pdev->id);
1346
1347         /*
1348          * Allocate and initialize hcd.
1349          * Our private data is also allocated automatically.
1350          */
1351         hcd_hs = usb_create_hcd(&vhci_hc_driver, &pdev->dev, dev_name(&pdev->dev));
1352         if (!hcd_hs) {
1353                 pr_err("create primary hcd failed\n");
1354                 return -ENOMEM;
1355         }
1356         hcd_hs->has_tt = 1;
1357
1358         /*
1359          * Finish generic HCD structure initialization and register.
1360          * Call the driver's reset() and start() routines.
1361          */
1362         ret = usb_add_hcd(hcd_hs, 0, 0);
1363         if (ret != 0) {
1364                 pr_err("usb_add_hcd hs failed %d\n", ret);
1365                 goto put_usb2_hcd;
1366         }
1367
1368         hcd_ss = usb_create_shared_hcd(&vhci_hc_driver, &pdev->dev,
1369                                        dev_name(&pdev->dev), hcd_hs);
1370         if (!hcd_ss) {
1371                 ret = -ENOMEM;
1372                 pr_err("create shared hcd failed\n");
1373                 goto remove_usb2_hcd;
1374         }
1375
1376         ret = usb_add_hcd(hcd_ss, 0, 0);
1377         if (ret) {
1378                 pr_err("usb_add_hcd ss failed %d\n", ret);
1379                 goto put_usb3_hcd;
1380         }
1381
1382         usbip_dbg_vhci_hc("bye\n");
1383         return 0;
1384
1385 put_usb3_hcd:
1386         usb_put_hcd(hcd_ss);
1387 remove_usb2_hcd:
1388         usb_remove_hcd(hcd_hs);
1389 put_usb2_hcd:
1390         usb_put_hcd(hcd_hs);
1391         vhci->vhci_hcd_hs = NULL;
1392         vhci->vhci_hcd_ss = NULL;
1393         return ret;
1394 }
1395
1396 static int vhci_hcd_remove(struct platform_device *pdev)
1397 {
1398         struct vhci *vhci = *((void **)dev_get_platdata(&pdev->dev));
1399
1400         /*
1401          * Disconnects the root hub,
1402          * then reverses the effects of usb_add_hcd(),
1403          * invoking the HCD's stop() methods.
1404          */
1405         usb_remove_hcd(vhci_hcd_to_hcd(vhci->vhci_hcd_ss));
1406         usb_put_hcd(vhci_hcd_to_hcd(vhci->vhci_hcd_ss));
1407
1408         usb_remove_hcd(vhci_hcd_to_hcd(vhci->vhci_hcd_hs));
1409         usb_put_hcd(vhci_hcd_to_hcd(vhci->vhci_hcd_hs));
1410
1411         vhci->vhci_hcd_hs = NULL;
1412         vhci->vhci_hcd_ss = NULL;
1413
1414         return 0;
1415 }
1416
1417 #ifdef CONFIG_PM
1418
1419 /* what should happen for USB/IP under suspend/resume? */
1420 static int vhci_hcd_suspend(struct platform_device *pdev, pm_message_t state)
1421 {
1422         struct usb_hcd *hcd;
1423         struct vhci *vhci;
1424         int rhport;
1425         int connected = 0;
1426         int ret = 0;
1427         unsigned long flags;
1428
1429         dev_dbg(&pdev->dev, "%s\n", __func__);
1430
1431         hcd = platform_get_drvdata(pdev);
1432         if (!hcd)
1433                 return 0;
1434
1435         vhci = *((void **)dev_get_platdata(hcd->self.controller));
1436
1437         spin_lock_irqsave(&vhci->lock, flags);
1438
1439         for (rhport = 0; rhport < VHCI_HC_PORTS; rhport++) {
1440                 if (vhci->vhci_hcd_hs->port_status[rhport] &
1441                     USB_PORT_STAT_CONNECTION)
1442                         connected += 1;
1443
1444                 if (vhci->vhci_hcd_ss->port_status[rhport] &
1445                     USB_PORT_STAT_CONNECTION)
1446                         connected += 1;
1447         }
1448
1449         spin_unlock_irqrestore(&vhci->lock, flags);
1450
1451         if (connected > 0) {
1452                 dev_info(&pdev->dev,
1453                          "We have %d active connection%s. Do not suspend.\n",
1454                          connected, (connected == 1 ? "" : "s"));
1455                 ret =  -EBUSY;
1456         } else {
1457                 dev_info(&pdev->dev, "suspend vhci_hcd");
1458                 clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
1459         }
1460
1461         return ret;
1462 }
1463
1464 static int vhci_hcd_resume(struct platform_device *pdev)
1465 {
1466         struct usb_hcd *hcd;
1467
1468         dev_dbg(&pdev->dev, "%s\n", __func__);
1469
1470         hcd = platform_get_drvdata(pdev);
1471         if (!hcd)
1472                 return 0;
1473         set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
1474         usb_hcd_poll_rh_status(hcd);
1475
1476         return 0;
1477 }
1478
1479 #else
1480
1481 #define vhci_hcd_suspend        NULL
1482 #define vhci_hcd_resume         NULL
1483
1484 #endif
1485
1486 static struct platform_driver vhci_driver = {
1487         .probe  = vhci_hcd_probe,
1488         .remove = vhci_hcd_remove,
1489         .suspend = vhci_hcd_suspend,
1490         .resume = vhci_hcd_resume,
1491         .driver = {
1492                 .name = driver_name,
1493         },
1494 };
1495
1496 static void del_platform_devices(void)
1497 {
1498         struct platform_device *pdev;
1499         int i;
1500
1501         for (i = 0; i < vhci_num_controllers; i++) {
1502                 pdev = vhcis[i].pdev;
1503                 if (pdev != NULL)
1504                         platform_device_unregister(pdev);
1505                 vhcis[i].pdev = NULL;
1506         }
1507         sysfs_remove_link(&platform_bus.kobj, driver_name);
1508 }
1509
1510 static int __init vhci_hcd_init(void)
1511 {
1512         int i, ret;
1513
1514         if (usb_disabled())
1515                 return -ENODEV;
1516
1517         if (vhci_num_controllers < 1)
1518                 vhci_num_controllers = 1;
1519
1520         vhcis = kcalloc(vhci_num_controllers, sizeof(struct vhci), GFP_KERNEL);
1521         if (vhcis == NULL)
1522                 return -ENOMEM;
1523
1524         for (i = 0; i < vhci_num_controllers; i++) {
1525                 vhcis[i].pdev = platform_device_alloc(driver_name, i);
1526                 if (!vhcis[i].pdev) {
1527                         i--;
1528                         while (i >= 0)
1529                                 platform_device_put(vhcis[i--].pdev);
1530                         ret = -ENOMEM;
1531                         goto err_device_alloc;
1532                 }
1533         }
1534         for (i = 0; i < vhci_num_controllers; i++) {
1535                 void *vhci = &vhcis[i];
1536                 ret = platform_device_add_data(vhcis[i].pdev, &vhci, sizeof(void *));
1537                 if (ret)
1538                         goto err_driver_register;
1539         }
1540
1541         ret = platform_driver_register(&vhci_driver);
1542         if (ret)
1543                 goto err_driver_register;
1544
1545         for (i = 0; i < vhci_num_controllers; i++) {
1546                 ret = platform_device_add(vhcis[i].pdev);
1547                 if (ret < 0) {
1548                         i--;
1549                         while (i >= 0)
1550                                 platform_device_del(vhcis[i--].pdev);
1551                         goto err_add_hcd;
1552                 }
1553         }
1554
1555         return ret;
1556
1557 err_add_hcd:
1558         platform_driver_unregister(&vhci_driver);
1559 err_driver_register:
1560         for (i = 0; i < vhci_num_controllers; i++)
1561                 platform_device_put(vhcis[i].pdev);
1562 err_device_alloc:
1563         kfree(vhcis);
1564         return ret;
1565 }
1566
1567 static void __exit vhci_hcd_exit(void)
1568 {
1569         del_platform_devices();
1570         platform_driver_unregister(&vhci_driver);
1571         kfree(vhcis);
1572 }
1573
1574 module_init(vhci_hcd_init);
1575 module_exit(vhci_hcd_exit);
1576
1577 MODULE_AUTHOR(DRIVER_AUTHOR);
1578 MODULE_DESCRIPTION(DRIVER_DESC);
1579 MODULE_LICENSE("GPL");