drivers/usb/gadget/udc/mv_u3d_core.c

   1 // SPDX-License-Identifier: GPL-2.0
   2 /*
   3  * Copyright (C) 2011 Marvell International Ltd. All rights reserved.
   4  */
   5
   6 #include <linux/module.h>
   7 #include <linux/dma-mapping.h>
   8 #include <linux/dmapool.h>
   9 #include <linux/kernel.h>
  10 #include <linux/delay.h>
  11 #include <linux/ioport.h>
  12 #include <linux/sched.h>
  13 #include <linux/slab.h>
  14 #include <linux/errno.h>
  15 #include <linux/timer.h>
  16 #include <linux/list.h>
  17 #include <linux/notifier.h>
  18 #include <linux/interrupt.h>
  19 #include <linux/moduleparam.h>
  20 #include <linux/device.h>
  21 #include <linux/usb/ch9.h>
  22 #include <linux/usb/gadget.h>
  23 #include <linux/pm.h>
  24 #include <linux/io.h>
  25 #include <linux/irq.h>
  26 #include <linux/platform_device.h>
  27 #include <linux/platform_data/mv_usb.h>
  28 #include <linux/clk.h>
  29
  30 #include "mv_u3d.h"
  31
  32 #define DRIVER_DESC             "Marvell PXA USB3.0 Device Controller driver"
  33
  34 static const char driver_name[] = "mv_u3d";
  35
  36 static void mv_u3d_nuke(struct mv_u3d_ep *ep, int status);
  37 static void mv_u3d_stop_activity(struct mv_u3d *u3d,
  38                         struct usb_gadget_driver *driver);
  39
  40 /* for endpoint 0 operations */
  41 static const struct usb_endpoint_descriptor mv_u3d_ep0_desc = {
  42         .bLength =              USB_DT_ENDPOINT_SIZE,
  43         .bDescriptorType =      USB_DT_ENDPOINT,
  44         .bEndpointAddress =     0,
  45         .bmAttributes =         USB_ENDPOINT_XFER_CONTROL,
  46         .wMaxPacketSize =       MV_U3D_EP0_MAX_PKT_SIZE,
  47 };
  48
  49 static void mv_u3d_ep0_reset(struct mv_u3d *u3d)
  50 {
  51         struct mv_u3d_ep *ep;
  52         u32 epxcr;
  53         int i;
  54
  55         for (i = 0; i < 2; i++) {
  56                 ep = &u3d->eps[i];
  57                 ep->u3d = u3d;
  58
  59                 /* ep0 ep context, ep0 in and out share the same ep context */
  60                 ep->ep_context = &u3d->ep_context[1];
  61         }
  62
  63         /* reset ep state machine */
  64         /* reset ep0 out */
  65         epxcr = ioread32(&u3d->vuc_regs->epcr[0].epxoutcr0);
  66         epxcr |= MV_U3D_EPXCR_EP_INIT;
  67         iowrite32(epxcr, &u3d->vuc_regs->epcr[0].epxoutcr0);
  68         udelay(5);
  69         epxcr &= ~MV_U3D_EPXCR_EP_INIT;
  70         iowrite32(epxcr, &u3d->vuc_regs->epcr[0].epxoutcr0);
  71
  72         epxcr = ((MV_U3D_EP0_MAX_PKT_SIZE
  73                 << MV_U3D_EPXCR_MAX_PACKET_SIZE_SHIFT)
  74                 | (1 << MV_U3D_EPXCR_MAX_BURST_SIZE_SHIFT)
  75                 | (1 << MV_U3D_EPXCR_EP_ENABLE_SHIFT)
  76                 | MV_U3D_EPXCR_EP_TYPE_CONTROL);
  77         iowrite32(epxcr, &u3d->vuc_regs->epcr[0].epxoutcr1);
  78
  79         /* reset ep0 in */
  80         epxcr = ioread32(&u3d->vuc_regs->epcr[0].epxincr0);
  81         epxcr |= MV_U3D_EPXCR_EP_INIT;
  82         iowrite32(epxcr, &u3d->vuc_regs->epcr[0].epxincr0);
  83         udelay(5);
  84         epxcr &= ~MV_U3D_EPXCR_EP_INIT;
  85         iowrite32(epxcr, &u3d->vuc_regs->epcr[0].epxincr0);
  86
  87         epxcr = ((MV_U3D_EP0_MAX_PKT_SIZE
  88                 << MV_U3D_EPXCR_MAX_PACKET_SIZE_SHIFT)
  89                 | (1 << MV_U3D_EPXCR_MAX_BURST_SIZE_SHIFT)
  90                 | (1 << MV_U3D_EPXCR_EP_ENABLE_SHIFT)
  91                 | MV_U3D_EPXCR_EP_TYPE_CONTROL);
  92         iowrite32(epxcr, &u3d->vuc_regs->epcr[0].epxincr1);
  93 }
  94
  95 static void mv_u3d_ep0_stall(struct mv_u3d *u3d)
  96 {
  97         u32 tmp;
  98         dev_dbg(u3d->dev, "%s\n", __func__);
  99
 100         /* set TX and RX to stall */
 101         tmp = ioread32(&u3d->vuc_regs->epcr[0].epxoutcr0);
 102         tmp |= MV_U3D_EPXCR_EP_HALT;
 103         iowrite32(tmp, &u3d->vuc_regs->epcr[0].epxoutcr0);
 104
 105         tmp = ioread32(&u3d->vuc_regs->epcr[0].epxincr0);
 106         tmp |= MV_U3D_EPXCR_EP_HALT;
 107         iowrite32(tmp, &u3d->vuc_regs->epcr[0].epxincr0);
 108
 109         /* update ep0 state */
 110         u3d->ep0_state = MV_U3D_WAIT_FOR_SETUP;
 111         u3d->ep0_dir = MV_U3D_EP_DIR_OUT;
 112 }
 113
 114 static int mv_u3d_process_ep_req(struct mv_u3d *u3d, int index,
 115         struct mv_u3d_req *curr_req)
 116 {
 117         struct mv_u3d_trb       *curr_trb;
 118         int actual, remaining_length = 0;
 119         int direction, ep_num;
 120         int retval = 0;
 121         u32 tmp, status, length;
 122
 123         direction = index % 2;
 124         ep_num = index / 2;
 125
 126         actual = curr_req->req.length;
 127
 128         while (!list_empty(&curr_req->trb_list)) {
 129                 curr_trb = list_entry(curr_req->trb_list.next,
 130                                         struct mv_u3d_trb, trb_list);
 131                 if (!curr_trb->trb_hw->ctrl.own) {
 132                         dev_err(u3d->dev, "%s, TRB own error!\n",
 133                                 u3d->eps[index].name);
 134                         return 1;
 135                 }
 136
 137                 curr_trb->trb_hw->ctrl.own = 0;
 138                 if (direction == MV_U3D_EP_DIR_OUT)
 139                         tmp = ioread32(&u3d->vuc_regs->rxst[ep_num].statuslo);
 140                 else
 141                         tmp = ioread32(&u3d->vuc_regs->txst[ep_num].statuslo);
 142
 143                 status = tmp >> MV_U3D_XFERSTATUS_COMPLETE_SHIFT;
 144                 length = tmp & MV_U3D_XFERSTATUS_TRB_LENGTH_MASK;
 145
 146                 if (status == MV_U3D_COMPLETE_SUCCESS ||
 147                         (status == MV_U3D_COMPLETE_SHORT_PACKET &&
 148                         direction == MV_U3D_EP_DIR_OUT)) {
 149                         remaining_length += length;
 150                         actual -= remaining_length;
 151                 } else {
 152                         dev_err(u3d->dev,
 153                                 "complete_tr error: ep=%d %s: error = 0x%x\n",
 154                                 index >> 1, direction ? "SEND" : "RECV",
 155                                 status);
 156                         retval = -EPROTO;
 157                 }
 158
 159                 list_del_init(&curr_trb->trb_list);
 160         }
 161         if (retval)
 162                 return retval;
 163
 164         curr_req->req.actual = actual;
 165         return 0;
 166 }
 167
 168 /*
 169  * mv_u3d_done() - retire a request; caller blocked irqs
 170  * @status : request status to be set, only works when
 171  * request is still in progress.
 172  */
 173 static
 174 void mv_u3d_done(struct mv_u3d_ep *ep, struct mv_u3d_req *req, int status)
 175         __releases(&ep->udc->lock)
 176         __acquires(&ep->udc->lock)
 177 {
 178         struct mv_u3d *u3d = (struct mv_u3d *)ep->u3d;
 179
 180         dev_dbg(u3d->dev, "mv_u3d_done: remove req->queue\n");
 181         /* Removed the req from ep queue */
 182         list_del_init(&req->queue);
 183
 184         /* req.status should be set as -EINPROGRESS in ep_queue() */
 185         if (req->req.status == -EINPROGRESS)
 186                 req->req.status = status;
 187         else
 188                 status = req->req.status;
 189
 190         /* Free trb for the request */
 191         if (!req->chain)
 192                 dma_pool_free(u3d->trb_pool,
 193                         req->trb_head->trb_hw, req->trb_head->trb_dma);
 194         else {
 195                 dma_unmap_single(ep->u3d->gadget.dev.parent,
 196                         (dma_addr_t)req->trb_head->trb_dma,
 197                         req->trb_count * sizeof(struct mv_u3d_trb_hw),
 198                         DMA_BIDIRECTIONAL);
 199                 kfree(req->trb_head->trb_hw);
 200         }
 201         kfree(req->trb_head);
 202
 203         usb_gadget_unmap_request(&u3d->gadget, &req->req, mv_u3d_ep_dir(ep));
 204
 205         if (status && (status != -ESHUTDOWN)) {
 206                 dev_dbg(u3d->dev, "complete %s req %p stat %d len %u/%u",
 207                         ep->ep.name, &req->req, status,
 208                         req->req.actual, req->req.length);
 209         }
 210
 211         spin_unlock(&ep->u3d->lock);
 212
 213         usb_gadget_giveback_request(&ep->ep, &req->req);
 214
 215         spin_lock(&ep->u3d->lock);
 216 }
 217
 218 static int mv_u3d_queue_trb(struct mv_u3d_ep *ep, struct mv_u3d_req *req)
 219 {
 220         u32 tmp, direction;
 221         struct mv_u3d *u3d;
 222         struct mv_u3d_ep_context *ep_context;
 223         int retval = 0;
 224
 225         u3d = ep->u3d;
 226         direction = mv_u3d_ep_dir(ep);
 227
 228         /* ep0 in and out share the same ep context slot 1*/
 229         if (ep->ep_num == 0)
 230                 ep_context = &(u3d->ep_context[1]);
 231         else
 232                 ep_context = &(u3d->ep_context[ep->ep_num * 2 + direction]);
 233
 234         /* check if the pipe is empty or not */
 235         if (!list_empty(&ep->queue)) {
 236                 dev_err(u3d->dev, "add trb to non-empty queue!\n");
 237                 retval = -ENOMEM;
 238                 WARN_ON(1);
 239         } else {
 240                 ep_context->rsvd0 = cpu_to_le32(1);
 241                 ep_context->rsvd1 = 0;
 242
 243                 /* Configure the trb address and set the DCS bit.
 244                  * Both DCS bit and own bit in trb should be set.
 245                  */
 246                 ep_context->trb_addr_lo =
 247                         cpu_to_le32(req->trb_head->trb_dma | DCS_ENABLE);
 248                 ep_context->trb_addr_hi = 0;
 249
 250                 /* Ensure that updates to the EP Context will
 251                  * occure before Ring Bell.
 252                  */
 253                 wmb();
 254
 255                 /* ring bell the ep */
 256                 if (ep->ep_num == 0)
 257                         tmp = 0x1;
 258                 else
 259                         tmp = ep->ep_num * 2
 260                                 + ((direction == MV_U3D_EP_DIR_OUT) ? 0 : 1);
 261
 262                 iowrite32(tmp, &u3d->op_regs->doorbell);
 263         }
 264         return retval;
 265 }
 266
 267 static struct mv_u3d_trb *mv_u3d_build_trb_one(struct mv_u3d_req *req,
 268                                 unsigned *length, dma_addr_t *dma)
 269 {
 270         u32 temp;
 271         unsigned int direction;
 272         struct mv_u3d_trb *trb;
 273         struct mv_u3d_trb_hw *trb_hw;
 274         struct mv_u3d *u3d;
 275
 276         /* how big will this transfer be? */
 277         *length = req->req.length - req->req.actual;
 278         BUG_ON(*length > (unsigned)MV_U3D_EP_MAX_LENGTH_TRANSFER);
 279
 280         u3d = req->ep->u3d;
 281
 282         trb = kzalloc(sizeof(*trb), GFP_ATOMIC);
 283         if (!trb)
 284                 return NULL;
 285
 286         /*
 287          * Be careful that no _GFP_HIGHMEM is set,
 288          * or we can not use dma_to_virt
 289          * cannot use GFP_KERNEL in spin lock
 290          */
 291         trb_hw = dma_pool_alloc(u3d->trb_pool, GFP_ATOMIC, dma);
 292         if (!trb_hw) {
 293                 kfree(trb);
 294                 dev_err(u3d->dev,
 295                         "%s, dma_pool_alloc fail\n", __func__);
 296                 return NULL;
 297         }
 298         trb->trb_dma = *dma;
 299         trb->trb_hw = trb_hw;
 300
 301         /* initialize buffer page pointers */
 302         temp = (u32)(req->req.dma + req->req.actual);
 303
 304         trb_hw->buf_addr_lo = cpu_to_le32(temp);
 305         trb_hw->buf_addr_hi = 0;
 306         trb_hw->trb_len = cpu_to_le32(*length);
 307         trb_hw->ctrl.own = 1;
 308
 309         if (req->ep->ep_num == 0)
 310                 trb_hw->ctrl.type = TYPE_DATA;
 311         else
 312                 trb_hw->ctrl.type = TYPE_NORMAL;
 313
 314         req->req.actual += *length;
 315
 316         direction = mv_u3d_ep_dir(req->ep);
 317         if (direction == MV_U3D_EP_DIR_IN)
 318                 trb_hw->ctrl.dir = 1;
 319         else
 320                 trb_hw->ctrl.dir = 0;
 321
 322         /* Enable interrupt for the last trb of a request */
 323         if (!req->req.no_interrupt)
 324                 trb_hw->ctrl.ioc = 1;
 325
 326         trb_hw->ctrl.chain = 0;
 327
 328         wmb();
 329         return trb;
 330 }
 331
 332 static int mv_u3d_build_trb_chain(struct mv_u3d_req *req, unsigned *length,
 333                 struct mv_u3d_trb *trb, int *is_last)
 334 {
 335         u32 temp;
 336         unsigned int direction;
 337         struct mv_u3d *u3d;
 338
 339         /* how big will this transfer be? */
 340         *length = min(req->req.length - req->req.actual,
 341                         (unsigned)MV_U3D_EP_MAX_LENGTH_TRANSFER);
 342
 343         u3d = req->ep->u3d;
 344
 345         trb->trb_dma = 0;
 346
 347         /* initialize buffer page pointers */
 348         temp = (u32)(req->req.dma + req->req.actual);
 349
 350         trb->trb_hw->buf_addr_lo = cpu_to_le32(temp);
 351         trb->trb_hw->buf_addr_hi = 0;
 352         trb->trb_hw->trb_len = cpu_to_le32(*length);
 353         trb->trb_hw->ctrl.own = 1;
 354
 355         if (req->ep->ep_num == 0)
 356                 trb->trb_hw->ctrl.type = TYPE_DATA;
 357         else
 358                 trb->trb_hw->ctrl.type = TYPE_NORMAL;
 359
 360         req->req.actual += *length;
 361
 362         direction = mv_u3d_ep_dir(req->ep);
 363         if (direction == MV_U3D_EP_DIR_IN)
 364                 trb->trb_hw->ctrl.dir = 1;
 365         else
 366                 trb->trb_hw->ctrl.dir = 0;
 367
 368         /* zlp is needed if req->req.zero is set */
 369         if (req->req.zero) {
 370                 if (*length == 0 || (*length % req->ep->ep.maxpacket) != 0)
 371                         *is_last = 1;
 372                 else
 373                         *is_last = 0;
 374         } else if (req->req.length == req->req.actual)
 375                 *is_last = 1;
 376         else
 377                 *is_last = 0;
 378
 379         /* Enable interrupt for the last trb of a request */
 380         if (*is_last && !req->req.no_interrupt)
 381                 trb->trb_hw->ctrl.ioc = 1;
 382
 383         if (*is_last)
 384                 trb->trb_hw->ctrl.chain = 0;
 385         else {
 386                 trb->trb_hw->ctrl.chain = 1;
 387                 dev_dbg(u3d->dev, "chain trb\n");
 388         }
 389
 390         wmb();
 391
 392         return 0;
 393 }
 394
 395 /* generate TRB linked list for a request
 396  * usb controller only supports continous trb chain,
 397  * that trb structure physical address should be continous.
 398  */
 399 static int mv_u3d_req_to_trb(struct mv_u3d_req *req)
 400 {
 401         unsigned count;
 402         int is_last;
 403         struct mv_u3d_trb *trb;
 404         struct mv_u3d_trb_hw *trb_hw;
 405         struct mv_u3d *u3d;
 406         dma_addr_t dma;
 407         unsigned length;
 408         unsigned trb_num;
 409
 410         u3d = req->ep->u3d;
 411
 412         INIT_LIST_HEAD(&req->trb_list);
 413
 414         length = req->req.length - req->req.actual;
 415         /* normally the request transfer length is less than 16KB.
 416          * we use buil_trb_one() to optimize it.
 417          */
 418         if (length <= (unsigned)MV_U3D_EP_MAX_LENGTH_TRANSFER) {
 419                 trb = mv_u3d_build_trb_one(req, &count, &dma);
 420                 list_add_tail(&trb->trb_list, &req->trb_list);
 421                 req->trb_head = trb;
 422                 req->trb_count = 1;
 423                 req->chain = 0;
 424         } else {
 425                 trb_num = length / MV_U3D_EP_MAX_LENGTH_TRANSFER;
 426                 if (length % MV_U3D_EP_MAX_LENGTH_TRANSFER)
 427                         trb_num++;
 428
 429                 trb = kcalloc(trb_num, sizeof(*trb), GFP_ATOMIC);
 430                 if (!trb)
 431                         return -ENOMEM;
 432
 433                 trb_hw = kcalloc(trb_num, sizeof(*trb_hw), GFP_ATOMIC);
 434                 if (!trb_hw) {
 435                         kfree(trb);
 436                         return -ENOMEM;
 437                 }
 438
 439                 do {
 440                         trb->trb_hw = trb_hw;
 441                         if (mv_u3d_build_trb_chain(req, &count,
 442                                                 trb, &is_last)) {
 443                                 dev_err(u3d->dev,
 444                                         "%s, mv_u3d_build_trb_chain fail\n",
 445                                         __func__);
 446                                 return -EIO;
 447                         }
 448
 449                         list_add_tail(&trb->trb_list, &req->trb_list);
 450                         req->trb_count++;
 451                         trb++;
 452                         trb_hw++;
 453                 } while (!is_last);
 454
 455                 req->trb_head = list_entry(req->trb_list.next,
 456                                         struct mv_u3d_trb, trb_list);
 457                 req->trb_head->trb_dma = dma_map_single(u3d->gadget.dev.parent,
 458                                         req->trb_head->trb_hw,
 459                                         trb_num * sizeof(*trb_hw),
 460                                         DMA_BIDIRECTIONAL);
 461                 if (dma_mapping_error(u3d->gadget.dev.parent,
 462                                         req->trb_head->trb_dma)) {
 463                         kfree(req->trb_head->trb_hw);
 464                         kfree(req->trb_head);
 465                         return -EFAULT;
 466                 }
 467
 468                 req->chain = 1;
 469         }
 470
 471         return 0;
 472 }
 473
 474 static int
 475 mv_u3d_start_queue(struct mv_u3d_ep *ep)
 476 {
 477         struct mv_u3d *u3d = ep->u3d;
 478         struct mv_u3d_req *req;
 479         int ret;
 480
 481         if (!list_empty(&ep->req_list) && !ep->processing)
 482                 req = list_entry(ep->req_list.next, struct mv_u3d_req, list);
 483         else
 484                 return 0;
 485
 486         ep->processing = 1;
 487
 488         /* set up dma mapping */
 489         ret = usb_gadget_map_request(&u3d->gadget, &req->req,
 490                                         mv_u3d_ep_dir(ep));
 491         if (ret)
 492                 goto break_processing;
 493
 494         req->req.status = -EINPROGRESS;
 495         req->req.actual = 0;
 496         req->trb_count = 0;
 497
 498         /* build trbs */
 499         ret = mv_u3d_req_to_trb(req);
 500         if (ret) {
 501                 dev_err(u3d->dev, "%s, mv_u3d_req_to_trb fail\n", __func__);
 502                 goto break_processing;
 503         }
 504
 505         /* and push them to device queue */
 506         ret = mv_u3d_queue_trb(ep, req);
 507         if (ret)
 508                 goto break_processing;
 509
 510         /* irq handler advances the queue */
 511         list_add_tail(&req->queue, &ep->queue);
 512
 513         return 0;
 514
 515 break_processing:
 516         ep->processing = 0;
 517         return ret;
 518 }
 519
 520 static int mv_u3d_ep_enable(struct usb_ep *_ep,
 521                 const struct usb_endpoint_descriptor *desc)
 522 {
 523         struct mv_u3d *u3d;
 524         struct mv_u3d_ep *ep;
 525         u16 max = 0;
 526         unsigned maxburst = 0;
 527         u32 epxcr, direction;
 528
 529         if (!_ep || !desc || desc->bDescriptorType != USB_DT_ENDPOINT)
 530                 return -EINVAL;
 531
 532         ep = container_of(_ep, struct mv_u3d_ep, ep);
 533         u3d = ep->u3d;
 534
 535         if (!u3d->driver || u3d->gadget.speed == USB_SPEED_UNKNOWN)
 536                 return -ESHUTDOWN;
 537
 538         direction = mv_u3d_ep_dir(ep);
 539         max = le16_to_cpu(desc->wMaxPacketSize);
 540
 541         if (!_ep->maxburst)
 542                 _ep->maxburst = 1;
 543         maxburst = _ep->maxburst;
 544
 545         /* Set the max burst size */
 546         switch (desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) {
 547         case USB_ENDPOINT_XFER_BULK:
 548                 if (maxburst > 16) {
 549                         dev_dbg(u3d->dev,
 550                                 "max burst should not be greater "
 551                                 "than 16 on bulk ep\n");
 552                         maxburst = 1;
 553                         _ep->maxburst = maxburst;
 554                 }
 555                 dev_dbg(u3d->dev,
 556                         "maxburst: %d on bulk %s\n", maxburst, ep->name);
 557                 break;
 558         case USB_ENDPOINT_XFER_CONTROL:
 559                 /* control transfer only supports maxburst as one */
 560                 maxburst = 1;
 561                 _ep->maxburst = maxburst;
 562                 break;
 563         case USB_ENDPOINT_XFER_INT:
 564                 if (maxburst != 1) {
 565                         dev_dbg(u3d->dev,
 566                                 "max burst should be 1 on int ep "
 567                                 "if transfer size is not 1024\n");
 568                         maxburst = 1;
 569                         _ep->maxburst = maxburst;
 570                 }
 571                 break;
 572         case USB_ENDPOINT_XFER_ISOC:
 573                 if (maxburst != 1) {
 574                         dev_dbg(u3d->dev,
 575                                 "max burst should be 1 on isoc ep "
 576                                 "if transfer size is not 1024\n");
 577                         maxburst = 1;
 578                         _ep->maxburst = maxburst;
 579                 }
 580                 break;
 581         default:
 582                 goto en_done;
 583         }
 584
 585         ep->ep.maxpacket = max;
 586         ep->ep.desc = desc;
 587         ep->enabled = 1;
 588
 589         /* Enable the endpoint for Rx or Tx and set the endpoint type */
 590         if (direction == MV_U3D_EP_DIR_OUT) {
 591                 epxcr = ioread32(&u3d->vuc_regs->epcr[ep->ep_num].epxoutcr0);
 592                 epxcr |= MV_U3D_EPXCR_EP_INIT;
 593                 iowrite32(epxcr, &u3d->vuc_regs->epcr[ep->ep_num].epxoutcr0);
 594                 udelay(5);
 595                 epxcr &= ~MV_U3D_EPXCR_EP_INIT;
 596                 iowrite32(epxcr, &u3d->vuc_regs->epcr[ep->ep_num].epxoutcr0);
 597
 598                 epxcr = ((max << MV_U3D_EPXCR_MAX_PACKET_SIZE_SHIFT)
 599                       | ((maxburst - 1) << MV_U3D_EPXCR_MAX_BURST_SIZE_SHIFT)
 600                       | (1 << MV_U3D_EPXCR_EP_ENABLE_SHIFT)
 601                       | (desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK));
 602                 iowrite32(epxcr, &u3d->vuc_regs->epcr[ep->ep_num].epxoutcr1);
 603         } else {
 604                 epxcr = ioread32(&u3d->vuc_regs->epcr[ep->ep_num].epxincr0);
 605                 epxcr |= MV_U3D_EPXCR_EP_INIT;
 606                 iowrite32(epxcr, &u3d->vuc_regs->epcr[ep->ep_num].epxincr0);
 607                 udelay(5);
 608                 epxcr &= ~MV_U3D_EPXCR_EP_INIT;
 609                 iowrite32(epxcr, &u3d->vuc_regs->epcr[ep->ep_num].epxincr0);
 610
 611                 epxcr = ((max << MV_U3D_EPXCR_MAX_PACKET_SIZE_SHIFT)
 612                       | ((maxburst - 1) << MV_U3D_EPXCR_MAX_BURST_SIZE_SHIFT)
 613                       | (1 << MV_U3D_EPXCR_EP_ENABLE_SHIFT)
 614                       | (desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK));
 615                 iowrite32(epxcr, &u3d->vuc_regs->epcr[ep->ep_num].epxincr1);
 616         }
 617
 618         return 0;
 619 en_done:
 620         return -EINVAL;
 621 }
 622
 623 static int  mv_u3d_ep_disable(struct usb_ep *_ep)
 624 {
 625         struct mv_u3d *u3d;
 626         struct mv_u3d_ep *ep;
 627         u32 epxcr, direction;
 628         unsigned long flags;
 629
 630         if (!_ep)
 631                 return -EINVAL;
 632
 633         ep = container_of(_ep, struct mv_u3d_ep, ep);
 634         if (!ep->ep.desc)
 635                 return -EINVAL;
 636
 637         u3d = ep->u3d;
 638
 639         direction = mv_u3d_ep_dir(ep);
 640
 641         /* nuke all pending requests (does flush) */
 642         spin_lock_irqsave(&u3d->lock, flags);
 643         mv_u3d_nuke(ep, -ESHUTDOWN);
 644         spin_unlock_irqrestore(&u3d->lock, flags);
 645
 646         /* Disable the endpoint for Rx or Tx and reset the endpoint type */
 647         if (direction == MV_U3D_EP_DIR_OUT) {
 648                 epxcr = ioread32(&u3d->vuc_regs->epcr[ep->ep_num].epxoutcr1);
 649                 epxcr &= ~((1 << MV_U3D_EPXCR_EP_ENABLE_SHIFT)
 650                       | USB_ENDPOINT_XFERTYPE_MASK);
 651                 iowrite32(epxcr, &u3d->vuc_regs->epcr[ep->ep_num].epxoutcr1);
 652         } else {
 653                 epxcr = ioread32(&u3d->vuc_regs->epcr[ep->ep_num].epxincr1);
 654                 epxcr &= ~((1 << MV_U3D_EPXCR_EP_ENABLE_SHIFT)
 655                       | USB_ENDPOINT_XFERTYPE_MASK);
 656                 iowrite32(epxcr, &u3d->vuc_regs->epcr[ep->ep_num].epxincr1);
 657         }
 658
 659         ep->enabled = 0;
 660
 661         ep->ep.desc = NULL;
 662         return 0;
 663 }
 664
 665 static struct usb_request *
 666 mv_u3d_alloc_request(struct usb_ep *_ep, gfp_t gfp_flags)
 667 {
 668         struct mv_u3d_req *req = NULL;
 669
 670         req = kzalloc(sizeof *req, gfp_flags);
 671         if (!req)
 672                 return NULL;
 673
 674         INIT_LIST_HEAD(&req->queue);
 675
 676         return &req->req;
 677 }
 678
 679 static void mv_u3d_free_request(struct usb_ep *_ep, struct usb_request *_req)
 680 {
 681         struct mv_u3d_req *req = container_of(_req, struct mv_u3d_req, req);
 682
 683         kfree(req);
 684 }
 685
 686 static void mv_u3d_ep_fifo_flush(struct usb_ep *_ep)
 687 {
 688         struct mv_u3d *u3d;
 689         u32 direction;
 690         struct mv_u3d_ep *ep = container_of(_ep, struct mv_u3d_ep, ep);
 691         unsigned int loops;
 692         u32 tmp;
 693
 694         /* if endpoint is not enabled, cannot flush endpoint */
 695         if (!ep->enabled)
 696                 return;
 697
 698         u3d = ep->u3d;
 699         direction = mv_u3d_ep_dir(ep);
 700
 701         /* ep0 need clear bit after flushing fifo. */
 702         if (!ep->ep_num) {
 703                 if (direction == MV_U3D_EP_DIR_OUT) {
 704                         tmp = ioread32(&u3d->vuc_regs->epcr[0].epxoutcr0);
 705                         tmp |= MV_U3D_EPXCR_EP_FLUSH;
 706                         iowrite32(tmp, &u3d->vuc_regs->epcr[0].epxoutcr0);
 707                         udelay(10);
 708                         tmp &= ~MV_U3D_EPXCR_EP_FLUSH;
 709                         iowrite32(tmp, &u3d->vuc_regs->epcr[0].epxoutcr0);
 710                 } else {
 711                         tmp = ioread32(&u3d->vuc_regs->epcr[0].epxincr0);
 712                         tmp |= MV_U3D_EPXCR_EP_FLUSH;
 713                         iowrite32(tmp, &u3d->vuc_regs->epcr[0].epxincr0);
 714                         udelay(10);
 715                         tmp &= ~MV_U3D_EPXCR_EP_FLUSH;
 716                         iowrite32(tmp, &u3d->vuc_regs->epcr[0].epxincr0);
 717                 }
 718                 return;
 719         }
 720
 721         if (direction == MV_U3D_EP_DIR_OUT) {
 722                 tmp = ioread32(&u3d->vuc_regs->epcr[ep->ep_num].epxoutcr0);
 723                 tmp |= MV_U3D_EPXCR_EP_FLUSH;
 724                 iowrite32(tmp, &u3d->vuc_regs->epcr[ep->ep_num].epxoutcr0);
 725
 726                 /* Wait until flushing completed */
 727                 loops = LOOPS(MV_U3D_FLUSH_TIMEOUT);
 728                 while (ioread32(&u3d->vuc_regs->epcr[ep->ep_num].epxoutcr0) &
 729                         MV_U3D_EPXCR_EP_FLUSH) {
 730                         /*
 731                          * EP_FLUSH bit should be cleared to indicate this
 732                          * operation is complete
 733                          */
 734                         if (loops == 0) {
 735                                 dev_dbg(u3d->dev,
 736                                     "EP FLUSH TIMEOUT for ep%d%s\n", ep->ep_num,
 737                                     direction ? "in" : "out");
 738                                 return;
 739                         }
 740                         loops--;
 741                         udelay(LOOPS_USEC);
 742                 }
 743         } else {        /* EP_DIR_IN */
 744                 tmp = ioread32(&u3d->vuc_regs->epcr[ep->ep_num].epxincr0);
 745                 tmp |= MV_U3D_EPXCR_EP_FLUSH;
 746                 iowrite32(tmp, &u3d->vuc_regs->epcr[ep->ep_num].epxincr0);
 747
 748                 /* Wait until flushing completed */
 749                 loops = LOOPS(MV_U3D_FLUSH_TIMEOUT);
 750                 while (ioread32(&u3d->vuc_regs->epcr[ep->ep_num].epxincr0) &
 751                         MV_U3D_EPXCR_EP_FLUSH) {
 752                         /*
 753                         * EP_FLUSH bit should be cleared to indicate this
 754                         * operation is complete
 755                         */
 756                         if (loops == 0) {
 757                                 dev_dbg(u3d->dev,
 758                                     "EP FLUSH TIMEOUT for ep%d%s\n", ep->ep_num,
 759                                     direction ? "in" : "out");
 760                                 return;
 761                         }
 762                         loops--;
 763                         udelay(LOOPS_USEC);
 764                 }
 765         }
 766 }
 767
 768 /* queues (submits) an I/O request to an endpoint */
 769 static int
 770 mv_u3d_ep_queue(struct usb_ep *_ep, struct usb_request *_req, gfp_t gfp_flags)
 771 {
 772         struct mv_u3d_ep *ep;
 773         struct mv_u3d_req *req;
 774         struct mv_u3d *u3d;
 775         unsigned long flags;
 776         int is_first_req = 0;
 777
 778         if (unlikely(!_ep || !_req))
 779                 return -EINVAL;
 780
 781         ep = container_of(_ep, struct mv_u3d_ep, ep);
 782         u3d = ep->u3d;
 783
 784         req = container_of(_req, struct mv_u3d_req, req);
 785
 786         if (!ep->ep_num
 787                 && u3d->ep0_state == MV_U3D_STATUS_STAGE
 788                 && !_req->length) {
 789                 dev_dbg(u3d->dev, "ep0 status stage\n");
 790                 u3d->ep0_state = MV_U3D_WAIT_FOR_SETUP;
 791                 return 0;
 792         }
 793
 794         dev_dbg(u3d->dev, "%s: %s, req: 0x%p\n",
 795                         __func__, _ep->name, req);
 796
 797         /* catch various bogus parameters */
 798         if (!req->req.complete || !req->req.buf
 799                         || !list_empty(&req->queue)) {
 800                 dev_err(u3d->dev,
 801                         "%s, bad params, _req: 0x%p,"
 802                         "req->req.complete: 0x%p, req->req.buf: 0x%p,"
 803                         "list_empty: 0x%x\n",
 804                         __func__, _req,
 805                         req->req.complete, req->req.buf,
 806                         list_empty(&req->queue));
 807                 return -EINVAL;
 808         }
 809         if (unlikely(!ep->ep.desc)) {
 810                 dev_err(u3d->dev, "%s, bad ep\n", __func__);
 811                 return -EINVAL;
 812         }
 813         if (ep->ep.desc->bmAttributes == USB_ENDPOINT_XFER_ISOC) {
 814                 if (req->req.length > ep->ep.maxpacket)
 815                         return -EMSGSIZE;
 816         }
 817
 818         if (!u3d->driver || u3d->gadget.speed == USB_SPEED_UNKNOWN) {
 819                 dev_err(u3d->dev,
 820                         "bad params of driver/speed\n");
 821                 return -ESHUTDOWN;
 822         }
 823
 824         req->ep = ep;
 825
 826         /* Software list handles usb request. */
 827         spin_lock_irqsave(&ep->req_lock, flags);
 828         is_first_req = list_empty(&ep->req_list);
 829         list_add_tail(&req->list, &ep->req_list);
 830         spin_unlock_irqrestore(&ep->req_lock, flags);
 831         if (!is_first_req) {
 832                 dev_dbg(u3d->dev, "list is not empty\n");
 833                 return 0;
 834         }
 835
 836         dev_dbg(u3d->dev, "call mv_u3d_start_queue from usb_ep_queue\n");
 837         spin_lock_irqsave(&u3d->lock, flags);
 838         mv_u3d_start_queue(ep);
 839         spin_unlock_irqrestore(&u3d->lock, flags);
 840         return 0;
 841 }
 842
 843 /* dequeues (cancels, unlinks) an I/O request from an endpoint */
 844 static int mv_u3d_ep_dequeue(struct usb_ep *_ep, struct usb_request *_req)
 845 {
 846         struct mv_u3d_ep *ep;
 847         struct mv_u3d_req *req = NULL, *iter;
 848         struct mv_u3d *u3d;
 849         struct mv_u3d_ep_context *ep_context;
 850         struct mv_u3d_req *next_req;
 851
 852         unsigned long flags;
 853         int ret = 0;
 854
 855         if (!_ep || !_req)
 856                 return -EINVAL;
 857
 858         ep = container_of(_ep, struct mv_u3d_ep, ep);
 859         u3d = ep->u3d;
 860
 861         spin_lock_irqsave(&ep->u3d->lock, flags);
 862
 863         /* make sure it's actually queued on this endpoint */
 864         list_for_each_entry(iter, &ep->queue, queue) {
 865                 if (&iter->req != _req)
 866                         continue;
 867                 req = iter;
 868                 break;
 869         }
 870         if (!req) {
 871                 ret = -EINVAL;
 872                 goto out;
 873         }
 874
 875         /* The request is in progress, or completed but not dequeued */
 876         if (ep->queue.next == &req->queue) {
 877                 _req->status = -ECONNRESET;
 878                 mv_u3d_ep_fifo_flush(_ep);
 879
 880                 /* The request isn't the last request in this ep queue */
 881                 if (req->queue.next != &ep->queue) {
 882                         dev_dbg(u3d->dev,
 883                                 "it is the last request in this ep queue\n");
 884                         ep_context = ep->ep_context;
 885                         next_req = list_entry(req->queue.next,
 886                                         struct mv_u3d_req, queue);
 887
 888                         /* Point first TRB of next request to the EP context. */
 889                         iowrite32((unsigned long) next_req->trb_head,
 890                                         &ep_context->trb_addr_lo);
 891                 } else {
 892                         struct mv_u3d_ep_context *ep_context;
 893                         ep_context = ep->ep_context;
 894                         ep_context->trb_addr_lo = 0;
 895                         ep_context->trb_addr_hi = 0;
 896                 }
 897
 898         } else
 899                 WARN_ON(1);
 900
 901         mv_u3d_done(ep, req, -ECONNRESET);
 902
 903         /* remove the req from the ep req list */
 904         if (!list_empty(&ep->req_list)) {
 905                 struct mv_u3d_req *curr_req;
 906                 curr_req = list_entry(ep->req_list.next,
 907                                         struct mv_u3d_req, list);
 908                 if (curr_req == req) {
 909                         list_del_init(&req->list);
 910                         ep->processing = 0;
 911                 }
 912         }
 913
 914 out:
 915         spin_unlock_irqrestore(&ep->u3d->lock, flags);
 916         return ret;
 917 }
 918
 919 static void
 920 mv_u3d_ep_set_stall(struct mv_u3d *u3d, u8 ep_num, u8 direction, int stall)
 921 {
 922         u32 tmp;
 923         struct mv_u3d_ep *ep = u3d->eps;
 924
 925         dev_dbg(u3d->dev, "%s\n", __func__);
 926         if (direction == MV_U3D_EP_DIR_OUT) {
 927                 tmp = ioread32(&u3d->vuc_regs->epcr[ep->ep_num].epxoutcr0);
 928                 if (stall)
 929                         tmp |= MV_U3D_EPXCR_EP_HALT;
 930                 else
 931                         tmp &= ~MV_U3D_EPXCR_EP_HALT;
 932                 iowrite32(tmp, &u3d->vuc_regs->epcr[ep->ep_num].epxoutcr0);
 933         } else {
 934                 tmp = ioread32(&u3d->vuc_regs->epcr[ep->ep_num].epxincr0);
 935                 if (stall)
 936                         tmp |= MV_U3D_EPXCR_EP_HALT;
 937                 else
 938                         tmp &= ~MV_U3D_EPXCR_EP_HALT;
 939                 iowrite32(tmp, &u3d->vuc_regs->epcr[ep->ep_num].epxincr0);
 940         }
 941 }
 942
 943 static int mv_u3d_ep_set_halt_wedge(struct usb_ep *_ep, int halt, int wedge)
 944 {
 945         struct mv_u3d_ep *ep;
 946         unsigned long flags;
 947         int status = 0;
 948         struct mv_u3d *u3d;
 949
 950         ep = container_of(_ep, struct mv_u3d_ep, ep);
 951         u3d = ep->u3d;
 952         if (!ep->ep.desc) {
 953                 status = -EINVAL;
 954                 goto out;
 955         }
 956
 957         if (ep->ep.desc->bmAttributes == USB_ENDPOINT_XFER_ISOC) {
 958                 status = -EOPNOTSUPP;
 959                 goto out;
 960         }
 961
 962         /*
 963          * Attempt to halt IN ep will fail if any transfer requests
 964          * are still queue
 965          */
 966         if (halt && (mv_u3d_ep_dir(ep) == MV_U3D_EP_DIR_IN)
 967                         && !list_empty(&ep->queue)) {
 968                 status = -EAGAIN;
 969                 goto out;
 970         }
 971
 972         spin_lock_irqsave(&ep->u3d->lock, flags);
 973         mv_u3d_ep_set_stall(u3d, ep->ep_num, mv_u3d_ep_dir(ep), halt);
 974         if (halt && wedge)
 975                 ep->wedge = 1;
 976         else if (!halt)
 977                 ep->wedge = 0;
 978         spin_unlock_irqrestore(&ep->u3d->lock, flags);
 979
 980         if (ep->ep_num == 0)
 981                 u3d->ep0_dir = MV_U3D_EP_DIR_OUT;
 982 out:
 983         return status;
 984 }
 985
 986 static int mv_u3d_ep_set_halt(struct usb_ep *_ep, int halt)
 987 {
 988         return mv_u3d_ep_set_halt_wedge(_ep, halt, 0);
 989 }
 990
 991 static int mv_u3d_ep_set_wedge(struct usb_ep *_ep)
 992 {
 993         return mv_u3d_ep_set_halt_wedge(_ep, 1, 1);
 994 }
 995
 996 static const struct usb_ep_ops mv_u3d_ep_ops = {
 997         .enable         = mv_u3d_ep_enable,
 998         .disable        = mv_u3d_ep_disable,
 999
1000         .alloc_request  = mv_u3d_alloc_request,
1001         .free_request   = mv_u3d_free_request,
1002
1003         .queue          = mv_u3d_ep_queue,
1004         .dequeue        = mv_u3d_ep_dequeue,
1005
1006         .set_wedge      = mv_u3d_ep_set_wedge,
1007         .set_halt       = mv_u3d_ep_set_halt,
1008         .fifo_flush     = mv_u3d_ep_fifo_flush,
1009 };
1010
1011 static void mv_u3d_controller_stop(struct mv_u3d *u3d)
1012 {
1013         u32 tmp;
1014
1015         if (!u3d->clock_gating && u3d->vbus_valid_detect)
1016                 iowrite32(MV_U3D_INTR_ENABLE_VBUS_VALID,
1017                                 &u3d->vuc_regs->intrenable);
1018         else
1019                 iowrite32(0, &u3d->vuc_regs->intrenable);
1020         iowrite32(~0x0, &u3d->vuc_regs->endcomplete);
1021         iowrite32(~0x0, &u3d->vuc_regs->trbunderrun);
1022         iowrite32(~0x0, &u3d->vuc_regs->trbcomplete);
1023         iowrite32(~0x0, &u3d->vuc_regs->linkchange);
1024         iowrite32(0x1, &u3d->vuc_regs->setuplock);
1025
1026         /* Reset the RUN bit in the command register to stop USB */
1027         tmp = ioread32(&u3d->op_regs->usbcmd);
1028         tmp &= ~MV_U3D_CMD_RUN_STOP;
1029         iowrite32(tmp, &u3d->op_regs->usbcmd);
1030         dev_dbg(u3d->dev, "after u3d_stop, USBCMD 0x%x\n",
1031                 ioread32(&u3d->op_regs->usbcmd));
1032 }
1033
1034 static void mv_u3d_controller_start(struct mv_u3d *u3d)
1035 {
1036         u32 usbintr;
1037         u32 temp;
1038
1039         /* enable link LTSSM state machine */
1040         temp = ioread32(&u3d->vuc_regs->ltssm);
1041         temp |= MV_U3D_LTSSM_PHY_INIT_DONE;
1042         iowrite32(temp, &u3d->vuc_regs->ltssm);
1043
1044         /* Enable interrupts */
1045         usbintr = MV_U3D_INTR_ENABLE_LINK_CHG | MV_U3D_INTR_ENABLE_TXDESC_ERR |
1046                 MV_U3D_INTR_ENABLE_RXDESC_ERR | MV_U3D_INTR_ENABLE_TX_COMPLETE |
1047                 MV_U3D_INTR_ENABLE_RX_COMPLETE | MV_U3D_INTR_ENABLE_SETUP |
1048                 (u3d->vbus_valid_detect ? MV_U3D_INTR_ENABLE_VBUS_VALID : 0);
1049         iowrite32(usbintr, &u3d->vuc_regs->intrenable);
1050
1051         /* Enable ctrl ep */
1052         iowrite32(0x1, &u3d->vuc_regs->ctrlepenable);
1053
1054         /* Set the Run bit in the command register */
1055         iowrite32(MV_U3D_CMD_RUN_STOP, &u3d->op_regs->usbcmd);
1056         dev_dbg(u3d->dev, "after u3d_start, USBCMD 0x%x\n",
1057                 ioread32(&u3d->op_regs->usbcmd));
1058 }
1059
1060 static int mv_u3d_controller_reset(struct mv_u3d *u3d)
1061 {
1062         unsigned int loops;
1063         u32 tmp;
1064
1065         /* Stop the controller */
1066         tmp = ioread32(&u3d->op_regs->usbcmd);
1067         tmp &= ~MV_U3D_CMD_RUN_STOP;
1068         iowrite32(tmp, &u3d->op_regs->usbcmd);
1069
1070         /* Reset the controller to get default values */
1071         iowrite32(MV_U3D_CMD_CTRL_RESET, &u3d->op_regs->usbcmd);
1072
1073         /* wait for reset to complete */
1074         loops = LOOPS(MV_U3D_RESET_TIMEOUT);
1075         while (ioread32(&u3d->op_regs->usbcmd) & MV_U3D_CMD_CTRL_RESET) {
1076                 if (loops == 0) {
1077                         dev_err(u3d->dev,
1078                                 "Wait for RESET completed TIMEOUT\n");
1079                         return -ETIMEDOUT;
1080                 }
1081                 loops--;
1082                 udelay(LOOPS_USEC);
1083         }
1084
1085         /* Configure the Endpoint Context Address */
1086         iowrite32(u3d->ep_context_dma, &u3d->op_regs->dcbaapl);
1087         iowrite32(0, &u3d->op_regs->dcbaaph);
1088
1089         return 0;
1090 }
1091
1092 static int mv_u3d_enable(struct mv_u3d *u3d)
1093 {
1094         struct mv_usb_platform_data *pdata = dev_get_platdata(u3d->dev);
1095         int retval;
1096
1097         if (u3d->active)
1098                 return 0;
1099
1100         if (!u3d->clock_gating) {
1101                 u3d->active = 1;
1102                 return 0;
1103         }
1104
1105         dev_dbg(u3d->dev, "enable u3d\n");
1106         clk_enable(u3d->clk);
1107         if (pdata->phy_init) {
1108                 retval = pdata->phy_init(u3d->phy_regs);
1109                 if (retval) {
1110                         dev_err(u3d->dev,
1111                                 "init phy error %d\n", retval);
1112                         clk_disable(u3d->clk);
1113                         return retval;
1114                 }
1115         }
1116         u3d->active = 1;
1117
1118         return 0;
1119 }
1120
1121 static void mv_u3d_disable(struct mv_u3d *u3d)
1122 {
1123         struct mv_usb_platform_data *pdata = dev_get_platdata(u3d->dev);
1124         if (u3d->clock_gating && u3d->active) {
1125                 dev_dbg(u3d->dev, "disable u3d\n");
1126                 if (pdata->phy_deinit)
1127                         pdata->phy_deinit(u3d->phy_regs);
1128                 clk_disable(u3d->clk);
1129                 u3d->active = 0;
1130         }
1131 }
1132
1133 static int mv_u3d_vbus_session(struct usb_gadget *gadget, int is_active)
1134 {
1135         struct mv_u3d *u3d;
1136         unsigned long flags;
1137         int retval = 0;
1138
1139         u3d = container_of(gadget, struct mv_u3d, gadget);
1140
1141         spin_lock_irqsave(&u3d->lock, flags);
1142
1143         u3d->vbus_active = (is_active != 0);
1144         dev_dbg(u3d->dev, "%s: softconnect %d, vbus_active %d\n",
1145                 __func__, u3d->softconnect, u3d->vbus_active);
1146         /*
1147          * 1. external VBUS detect: we can disable/enable clock on demand.
1148          * 2. UDC VBUS detect: we have to enable clock all the time.
1149          * 3. No VBUS detect: we have to enable clock all the time.
1150          */
1151         if (u3d->driver && u3d->softconnect && u3d->vbus_active) {
1152                 retval = mv_u3d_enable(u3d);
1153                 if (retval == 0) {
1154                         /*
1155                          * after clock is disabled, we lost all the register
1156                          *  context. We have to re-init registers
1157                          */
1158                         mv_u3d_controller_reset(u3d);
1159                         mv_u3d_ep0_reset(u3d);
1160                         mv_u3d_controller_start(u3d);
1161                 }
1162         } else if (u3d->driver && u3d->softconnect) {
1163                 if (!u3d->active)
1164                         goto out;
1165
1166                 /* stop all the transfer in queue*/
1167                 mv_u3d_stop_activity(u3d, u3d->driver);
1168                 mv_u3d_controller_stop(u3d);
1169                 mv_u3d_disable(u3d);
1170         }
1171
1172 out:
1173         spin_unlock_irqrestore(&u3d->lock, flags);
1174         return retval;
1175 }
1176
1177 /* constrain controller's VBUS power usage
1178  * This call is used by gadget drivers during SET_CONFIGURATION calls,
1179  * reporting how much power the device may consume.  For example, this
1180  * could affect how quickly batteries are recharged.
1181  *
1182  * Returns zero on success, else negative errno.
1183  */
1184 static int mv_u3d_vbus_draw(struct usb_gadget *gadget, unsigned mA)
1185 {
1186         struct mv_u3d *u3d = container_of(gadget, struct mv_u3d, gadget);
1187
1188         u3d->power = mA;
1189
1190         return 0;
1191 }
1192
1193 static int mv_u3d_pullup(struct usb_gadget *gadget, int is_on)
1194 {
1195         struct mv_u3d *u3d = container_of(gadget, struct mv_u3d, gadget);
1196         unsigned long flags;
1197         int retval = 0;
1198
1199         spin_lock_irqsave(&u3d->lock, flags);
1200
1201         dev_dbg(u3d->dev, "%s: softconnect %d, vbus_active %d\n",
1202                 __func__, u3d->softconnect, u3d->vbus_active);
1203         u3d->softconnect = (is_on != 0);
1204         if (u3d->driver && u3d->softconnect && u3d->vbus_active) {
1205                 retval = mv_u3d_enable(u3d);
1206                 if (retval == 0) {
1207                         /*
1208                          * after clock is disabled, we lost all the register
1209                          *  context. We have to re-init registers
1210                          */
1211                         mv_u3d_controller_reset(u3d);
1212                         mv_u3d_ep0_reset(u3d);
1213                         mv_u3d_controller_start(u3d);
1214                 }
1215         } else if (u3d->driver && u3d->vbus_active) {
1216                 /* stop all the transfer in queue*/
1217                 mv_u3d_stop_activity(u3d, u3d->driver);
1218                 mv_u3d_controller_stop(u3d);
1219                 mv_u3d_disable(u3d);
1220         }
1221
1222         spin_unlock_irqrestore(&u3d->lock, flags);
1223
1224         return retval;
1225 }
1226
1227 static int mv_u3d_start(struct usb_gadget *g,
1228                 struct usb_gadget_driver *driver)
1229 {
1230         struct mv_u3d *u3d = container_of(g, struct mv_u3d, gadget);
1231         struct mv_usb_platform_data *pdata = dev_get_platdata(u3d->dev);
1232         unsigned long flags;
1233
1234         if (u3d->driver)
1235                 return -EBUSY;
1236
1237         spin_lock_irqsave(&u3d->lock, flags);
1238
1239         if (!u3d->clock_gating) {
1240                 clk_enable(u3d->clk);
1241                 if (pdata->phy_init)
1242                         pdata->phy_init(u3d->phy_regs);
1243         }
1244
1245         /* hook up the driver ... */
1246         u3d->driver = driver;
1247
1248         u3d->ep0_dir = USB_DIR_OUT;
1249
1250         spin_unlock_irqrestore(&u3d->lock, flags);
1251
1252         u3d->vbus_valid_detect = 1;
1253
1254         return 0;
1255 }
1256
1257 static int mv_u3d_stop(struct usb_gadget *g)
1258 {
1259         struct mv_u3d *u3d = container_of(g, struct mv_u3d, gadget);
1260         struct mv_usb_platform_data *pdata = dev_get_platdata(u3d->dev);
1261         unsigned long flags;
1262
1263         u3d->vbus_valid_detect = 0;
1264         spin_lock_irqsave(&u3d->lock, flags);
1265
1266         /* enable clock to access controller register */
1267         clk_enable(u3d->clk);
1268         if (pdata->phy_init)
1269                 pdata->phy_init(u3d->phy_regs);
1270
1271         mv_u3d_controller_stop(u3d);
1272         /* stop all usb activities */
1273         u3d->gadget.speed = USB_SPEED_UNKNOWN;
1274         mv_u3d_stop_activity(u3d, NULL);
1275         mv_u3d_disable(u3d);
1276
1277         if (pdata->phy_deinit)
1278                 pdata->phy_deinit(u3d->phy_regs);
1279         clk_disable(u3d->clk);
1280
1281         spin_unlock_irqrestore(&u3d->lock, flags);
1282
1283         u3d->driver = NULL;
1284
1285         return 0;
1286 }
1287
1288 /* device controller usb_gadget_ops structure */
1289 static const struct usb_gadget_ops mv_u3d_ops = {
1290         /* notify controller that VBUS is powered or not */
1291         .vbus_session   = mv_u3d_vbus_session,
1292
1293         /* constrain controller's VBUS power usage */
1294         .vbus_draw      = mv_u3d_vbus_draw,
1295
1296         .pullup         = mv_u3d_pullup,
1297         .udc_start      = mv_u3d_start,
1298         .udc_stop       = mv_u3d_stop,
1299 };
1300
1301 static int mv_u3d_eps_init(struct mv_u3d *u3d)
1302 {
1303         struct mv_u3d_ep        *ep;
1304         char name[14];
1305         int i;
1306
1307         /* initialize ep0, ep0 in/out use eps[1] */
1308         ep = &u3d->eps[1];
1309         ep->u3d = u3d;
1310         strncpy(ep->name, "ep0", sizeof(ep->name));
1311         ep->ep.name = ep->name;
1312         ep->ep.ops = &mv_u3d_ep_ops;
1313         ep->wedge = 0;
1314         usb_ep_set_maxpacket_limit(&ep->ep, MV_U3D_EP0_MAX_PKT_SIZE);
1315         ep->ep.caps.type_control = true;
1316         ep->ep.caps.dir_in = true;
1317         ep->ep.caps.dir_out = true;
1318         ep->ep_num = 0;
1319         ep->ep.desc = &mv_u3d_ep0_desc;
1320         INIT_LIST_HEAD(&ep->queue);
1321         INIT_LIST_HEAD(&ep->req_list);
1322         ep->ep_type = USB_ENDPOINT_XFER_CONTROL;
1323
1324         /* add ep0 ep_context */
1325         ep->ep_context = &u3d->ep_context[1];
1326
1327         /* initialize other endpoints */
1328         for (i = 2; i < u3d->max_eps * 2; i++) {
1329                 ep = &u3d->eps[i];
1330                 if (i & 1) {
1331                         snprintf(name, sizeof(name), "ep%din", i >> 1);
1332                         ep->direction = MV_U3D_EP_DIR_IN;
1333                         ep->ep.caps.dir_in = true;
1334                 } else {
1335                         snprintf(name, sizeof(name), "ep%dout", i >> 1);
1336                         ep->direction = MV_U3D_EP_DIR_OUT;
1337                         ep->ep.caps.dir_out = true;
1338                 }
1339                 ep->u3d = u3d;
1340                 strncpy(ep->name, name, sizeof(ep->name));
1341                 ep->ep.name = ep->name;
1342
1343                 ep->ep.caps.type_iso = true;
1344                 ep->ep.caps.type_bulk = true;
1345                 ep->ep.caps.type_int = true;
1346
1347                 ep->ep.ops = &mv_u3d_ep_ops;
1348                 usb_ep_set_maxpacket_limit(&ep->ep, (unsigned short) ~0);
1349                 ep->ep_num = i / 2;
1350
1351                 INIT_LIST_HEAD(&ep->queue);
1352                 list_add_tail(&ep->ep.ep_list, &u3d->gadget.ep_list);
1353
1354                 INIT_LIST_HEAD(&ep->req_list);
1355                 spin_lock_init(&ep->req_lock);
1356                 ep->ep_context = &u3d->ep_context[i];
1357         }
1358
1359         return 0;
1360 }
1361
1362 /* delete all endpoint requests, called with spinlock held */
1363 static void mv_u3d_nuke(struct mv_u3d_ep *ep, int status)
1364 {
1365         /* endpoint fifo flush */
1366         mv_u3d_ep_fifo_flush(&ep->ep);
1367
1368         while (!list_empty(&ep->queue)) {
1369                 struct mv_u3d_req *req = NULL;
1370                 req = list_entry(ep->queue.next, struct mv_u3d_req, queue);
1371                 mv_u3d_done(ep, req, status);
1372         }
1373 }
1374
1375 /* stop all USB activities */
1376 static
1377 void mv_u3d_stop_activity(struct mv_u3d *u3d, struct usb_gadget_driver *driver)
1378 {
1379         struct mv_u3d_ep        *ep;
1380
1381         mv_u3d_nuke(&u3d->eps[1], -ESHUTDOWN);
1382
1383         list_for_each_entry(ep, &u3d->gadget.ep_list, ep.ep_list) {
1384                 mv_u3d_nuke(ep, -ESHUTDOWN);
1385         }
1386
1387         /* report disconnect; the driver is already quiesced */
1388         if (driver) {
1389                 spin_unlock(&u3d->lock);
1390                 driver->disconnect(&u3d->gadget);
1391                 spin_lock(&u3d->lock);
1392         }
1393 }
1394
1395 static void mv_u3d_irq_process_error(struct mv_u3d *u3d)
1396 {
1397         /* Increment the error count */
1398         u3d->errors++;
1399         dev_err(u3d->dev, "%s\n", __func__);
1400 }
1401
1402 static void mv_u3d_irq_process_link_change(struct mv_u3d *u3d)
1403 {
1404         u32 linkchange;
1405
1406         linkchange = ioread32(&u3d->vuc_regs->linkchange);
1407         iowrite32(linkchange, &u3d->vuc_regs->linkchange);
1408
1409         dev_dbg(u3d->dev, "linkchange: 0x%x\n", linkchange);
1410
1411         if (linkchange & MV_U3D_LINK_CHANGE_LINK_UP) {
1412                 dev_dbg(u3d->dev, "link up: ltssm state: 0x%x\n",
1413                         ioread32(&u3d->vuc_regs->ltssmstate));
1414
1415                 u3d->usb_state = USB_STATE_DEFAULT;
1416                 u3d->ep0_dir = MV_U3D_EP_DIR_OUT;
1417                 u3d->ep0_state = MV_U3D_WAIT_FOR_SETUP;
1418
1419                 /* set speed */
1420                 u3d->gadget.speed = USB_SPEED_SUPER;
1421         }
1422
1423         if (linkchange & MV_U3D_LINK_CHANGE_SUSPEND) {
1424                 dev_dbg(u3d->dev, "link suspend\n");
1425                 u3d->resume_state = u3d->usb_state;
1426                 u3d->usb_state = USB_STATE_SUSPENDED;
1427         }
1428
1429         if (linkchange & MV_U3D_LINK_CHANGE_RESUME) {
1430                 dev_dbg(u3d->dev, "link resume\n");
1431                 u3d->usb_state = u3d->resume_state;
1432                 u3d->resume_state = 0;
1433         }
1434
1435         if (linkchange & MV_U3D_LINK_CHANGE_WRESET) {
1436                 dev_dbg(u3d->dev, "warm reset\n");
1437                 u3d->usb_state = USB_STATE_POWERED;
1438         }
1439
1440         if (linkchange & MV_U3D_LINK_CHANGE_HRESET) {
1441                 dev_dbg(u3d->dev, "hot reset\n");
1442                 u3d->usb_state = USB_STATE_DEFAULT;
1443         }
1444
1445         if (linkchange & MV_U3D_LINK_CHANGE_INACT)
1446                 dev_dbg(u3d->dev, "inactive\n");
1447
1448         if (linkchange & MV_U3D_LINK_CHANGE_DISABLE_AFTER_U0)
1449                 dev_dbg(u3d->dev, "ss.disabled\n");
1450
1451         if (linkchange & MV_U3D_LINK_CHANGE_VBUS_INVALID) {
1452                 dev_dbg(u3d->dev, "vbus invalid\n");
1453                 u3d->usb_state = USB_STATE_ATTACHED;
1454                 u3d->vbus_valid_detect = 1;
1455                 /* if external vbus detect is not supported,
1456                  * we handle it here.
1457                  */
1458                 if (!u3d->vbus) {
1459                         spin_unlock(&u3d->lock);
1460                         mv_u3d_vbus_session(&u3d->gadget, 0);
1461                         spin_lock(&u3d->lock);
1462                 }
1463         }
1464 }
1465
1466 static void mv_u3d_ch9setaddress(struct mv_u3d *u3d,
1467                                 struct usb_ctrlrequest *setup)
1468 {
1469         u32 tmp;
1470
1471         if (u3d->usb_state != USB_STATE_DEFAULT) {
1472                 dev_err(u3d->dev,
1473                         "%s, cannot setaddr in this state (%d)\n",
1474                         __func__, u3d->usb_state);
1475                 goto err;
1476         }
1477
1478         u3d->dev_addr = (u8)setup->wValue;
1479
1480         dev_dbg(u3d->dev, "%s: 0x%x\n", __func__, u3d->dev_addr);
1481
1482         if (u3d->dev_addr > 127) {
1483                 dev_err(u3d->dev,
1484                         "%s, u3d address is wrong (out of range)\n", __func__);
1485                 u3d->dev_addr = 0;
1486                 goto err;
1487         }
1488
1489         /* update usb state */
1490         u3d->usb_state = USB_STATE_ADDRESS;
1491
1492         /* set the new address */
1493         tmp = ioread32(&u3d->vuc_regs->devaddrtiebrkr);
1494         tmp &= ~0x7F;
1495         tmp |= (u32)u3d->dev_addr;
1496         iowrite32(tmp, &u3d->vuc_regs->devaddrtiebrkr);
1497
1498         return;
1499 err:
1500         mv_u3d_ep0_stall(u3d);
1501 }
1502
1503 static int mv_u3d_is_set_configuration(struct usb_ctrlrequest *setup)
1504 {
1505         if ((setup->bRequestType & USB_TYPE_MASK) == USB_TYPE_STANDARD)
1506                 if (setup->bRequest == USB_REQ_SET_CONFIGURATION)
1507                         return 1;
1508
1509         return 0;
1510 }
1511
1512 static void mv_u3d_handle_setup_packet(struct mv_u3d *u3d, u8 ep_num,
1513         struct usb_ctrlrequest *setup)
1514         __releases(&u3c->lock)
1515         __acquires(&u3c->lock)
1516 {
1517         bool delegate = false;
1518
1519         mv_u3d_nuke(&u3d->eps[ep_num * 2 + MV_U3D_EP_DIR_IN], -ESHUTDOWN);
1520
1521         dev_dbg(u3d->dev, "SETUP %02x.%02x v%04x i%04x l%04x\n",
1522                         setup->bRequestType, setup->bRequest,
1523                         setup->wValue, setup->wIndex, setup->wLength);
1524
1525         /* We process some stardard setup requests here */
1526         if ((setup->bRequestType & USB_TYPE_MASK) == USB_TYPE_STANDARD) {
1527                 switch (setup->bRequest) {
1528                 case USB_REQ_GET_STATUS:
1529                         delegate = true;
1530                         break;
1531
1532                 case USB_REQ_SET_ADDRESS:
1533                         mv_u3d_ch9setaddress(u3d, setup);
1534                         break;
1535
1536                 case USB_REQ_CLEAR_FEATURE:
1537                         delegate = true;
1538                         break;
1539
1540                 case USB_REQ_SET_FEATURE:
1541                         delegate = true;
1542                         break;
1543
1544                 default:
1545                         delegate = true;
1546                 }
1547         } else
1548                 delegate = true;
1549
1550         /* delegate USB standard requests to the gadget driver */
1551         if (delegate) {
1552                 /* USB requests handled by gadget */
1553                 if (setup->wLength) {
1554                         /* DATA phase from gadget, STATUS phase from u3d */
1555                         u3d->ep0_dir = (setup->bRequestType & USB_DIR_IN)
1556                                         ? MV_U3D_EP_DIR_IN : MV_U3D_EP_DIR_OUT;
1557                         spin_unlock(&u3d->lock);
1558                         if (u3d->driver->setup(&u3d->gadget,
1559                                 &u3d->local_setup_buff) < 0) {
1560                                 dev_err(u3d->dev, "setup error!\n");
1561                                 mv_u3d_ep0_stall(u3d);
1562                         }
1563                         spin_lock(&u3d->lock);
1564                 } else {
1565                         /* no DATA phase, STATUS phase from gadget */
1566                         u3d->ep0_dir = MV_U3D_EP_DIR_IN;
1567                         u3d->ep0_state = MV_U3D_STATUS_STAGE;
1568                         spin_unlock(&u3d->lock);
1569                         if (u3d->driver->setup(&u3d->gadget,
1570                                 &u3d->local_setup_buff) < 0)
1571                                 mv_u3d_ep0_stall(u3d);
1572                         spin_lock(&u3d->lock);
1573                 }
1574
1575                 if (mv_u3d_is_set_configuration(setup)) {
1576                         dev_dbg(u3d->dev, "u3d configured\n");
1577                         u3d->usb_state = USB_STATE_CONFIGURED;
1578                 }
1579         }
1580 }
1581
1582 static void mv_u3d_get_setup_data(struct mv_u3d *u3d, u8 ep_num, u8 *buffer_ptr)
1583 {
1584         struct mv_u3d_ep_context *epcontext;
1585
1586         epcontext = &u3d->ep_context[ep_num * 2 + MV_U3D_EP_DIR_IN];
1587
1588         /* Copy the setup packet to local buffer */
1589         memcpy(buffer_ptr, (u8 *) &epcontext->setup_buffer, 8);
1590 }
1591
1592 static void mv_u3d_irq_process_setup(struct mv_u3d *u3d)
1593 {
1594         u32 tmp, i;
1595         /* Process all Setup packet received interrupts */
1596         tmp = ioread32(&u3d->vuc_regs->setuplock);
1597         if (tmp) {
1598                 for (i = 0; i < u3d->max_eps; i++) {
1599                         if (tmp & (1 << i)) {
1600                                 mv_u3d_get_setup_data(u3d, i,
1601                                         (u8 *)(&u3d->local_setup_buff));
1602                                 mv_u3d_handle_setup_packet(u3d, i,
1603                                         &u3d->local_setup_buff);
1604                         }
1605                 }
1606         }
1607
1608         iowrite32(tmp, &u3d->vuc_regs->setuplock);
1609 }
1610
1611 static void mv_u3d_irq_process_tr_complete(struct mv_u3d *u3d)
1612 {
1613         u32 tmp, bit_pos;
1614         int i, ep_num = 0, direction = 0;
1615         struct mv_u3d_ep        *curr_ep;
1616         struct mv_u3d_req *curr_req, *temp_req;
1617         int status;
1618
1619         tmp = ioread32(&u3d->vuc_regs->endcomplete);
1620
1621         dev_dbg(u3d->dev, "tr_complete: ep: 0x%x\n", tmp);
1622         if (!tmp)
1623                 return;
1624         iowrite32(tmp, &u3d->vuc_regs->endcomplete);
1625
1626         for (i = 0; i < u3d->max_eps * 2; i++) {
1627                 ep_num = i >> 1;
1628                 direction = i % 2;
1629
1630                 bit_pos = 1 << (ep_num + 16 * direction);
1631
1632                 if (!(bit_pos & tmp))
1633                         continue;
1634
1635                 if (i == 0)
1636                         curr_ep = &u3d->eps[1];
1637                 else
1638                         curr_ep = &u3d->eps[i];
1639
1640                 /* remove req out of ep request list after completion */
1641                 dev_dbg(u3d->dev, "tr comp: check req_list\n");
1642                 spin_lock(&curr_ep->req_lock);
1643                 if (!list_empty(&curr_ep->req_list)) {
1644                         struct mv_u3d_req *req;
1645                         req = list_entry(curr_ep->req_list.next,
1646                                                 struct mv_u3d_req, list);
1647                         list_del_init(&req->list);
1648                         curr_ep->processing = 0;
1649                 }
1650                 spin_unlock(&curr_ep->req_lock);
1651
1652                 /* process the req queue until an uncomplete request */
1653                 list_for_each_entry_safe(curr_req, temp_req,
1654                         &curr_ep->queue, queue) {
1655                         status = mv_u3d_process_ep_req(u3d, i, curr_req);
1656                         if (status)
1657                                 break;
1658                         /* write back status to req */
1659                         curr_req->req.status = status;
1660
1661                         /* ep0 request completion */
1662                         if (ep_num == 0) {
1663                                 mv_u3d_done(curr_ep, curr_req, 0);
1664                                 break;
1665                         } else {
1666                                 mv_u3d_done(curr_ep, curr_req, status);
1667                         }
1668                 }
1669
1670                 dev_dbg(u3d->dev, "call mv_u3d_start_queue from ep complete\n");
1671                 mv_u3d_start_queue(curr_ep);
1672         }
1673 }
1674
1675 static irqreturn_t mv_u3d_irq(int irq, void *dev)
1676 {
1677         struct mv_u3d *u3d = (struct mv_u3d *)dev;
1678         u32 status, intr;
1679         u32 bridgesetting;
1680         u32 trbunderrun;
1681
1682         spin_lock(&u3d->lock);
1683
1684         status = ioread32(&u3d->vuc_regs->intrcause);
1685         intr = ioread32(&u3d->vuc_regs->intrenable);
1686         status &= intr;
1687
1688         if (status == 0) {
1689                 spin_unlock(&u3d->lock);
1690                 dev_err(u3d->dev, "irq error!\n");
1691                 return IRQ_NONE;
1692         }
1693
1694         if (status & MV_U3D_USBINT_VBUS_VALID) {
1695                 bridgesetting = ioread32(&u3d->vuc_regs->bridgesetting);
1696                 if (bridgesetting & MV_U3D_BRIDGE_SETTING_VBUS_VALID) {
1697                         /* write vbus valid bit of bridge setting to clear */
1698                         bridgesetting = MV_U3D_BRIDGE_SETTING_VBUS_VALID;
1699                         iowrite32(bridgesetting, &u3d->vuc_regs->bridgesetting);
1700                         dev_dbg(u3d->dev, "vbus valid\n");
1701
1702                         u3d->usb_state = USB_STATE_POWERED;
1703                         u3d->vbus_valid_detect = 0;
1704                         /* if external vbus detect is not supported,
1705                          * we handle it here.
1706                          */
1707                         if (!u3d->vbus) {
1708                                 spin_unlock(&u3d->lock);
1709                                 mv_u3d_vbus_session(&u3d->gadget, 1);
1710                                 spin_lock(&u3d->lock);
1711                         }
1712                 } else
1713                         dev_err(u3d->dev, "vbus bit is not set\n");
1714         }
1715
1716         /* RX data is already in the 16KB FIFO.*/
1717         if (status & MV_U3D_USBINT_UNDER_RUN) {
1718                 trbunderrun = ioread32(&u3d->vuc_regs->trbunderrun);
1719                 dev_err(u3d->dev, "under run, ep%d\n", trbunderrun);
1720                 iowrite32(trbunderrun, &u3d->vuc_regs->trbunderrun);
1721                 mv_u3d_irq_process_error(u3d);
1722         }
1723
1724         if (status & (MV_U3D_USBINT_RXDESC_ERR | MV_U3D_USBINT_TXDESC_ERR)) {
1725                 /* write one to clear */
1726                 iowrite32(status & (MV_U3D_USBINT_RXDESC_ERR
1727                         | MV_U3D_USBINT_TXDESC_ERR),
1728                         &u3d->vuc_regs->intrcause);
1729                 dev_err(u3d->dev, "desc err 0x%x\n", status);
1730                 mv_u3d_irq_process_error(u3d);
1731         }
1732
1733         if (status & MV_U3D_USBINT_LINK_CHG)
1734                 mv_u3d_irq_process_link_change(u3d);
1735
1736         if (status & MV_U3D_USBINT_TX_COMPLETE)
1737                 mv_u3d_irq_process_tr_complete(u3d);
1738
1739         if (status & MV_U3D_USBINT_RX_COMPLETE)
1740                 mv_u3d_irq_process_tr_complete(u3d);
1741
1742         if (status & MV_U3D_USBINT_SETUP)
1743                 mv_u3d_irq_process_setup(u3d);
1744
1745         spin_unlock(&u3d->lock);
1746         return IRQ_HANDLED;
1747 }
1748
1749 static int mv_u3d_remove(struct platform_device *dev)
1750 {
1751         struct mv_u3d *u3d = platform_get_drvdata(dev);
1752
1753         BUG_ON(u3d == NULL);
1754
1755         usb_del_gadget_udc(&u3d->gadget);
1756
1757         /* free memory allocated in probe */
1758         dma_pool_destroy(u3d->trb_pool);
1759
1760         if (u3d->ep_context)
1761                 dma_free_coherent(&dev->dev, u3d->ep_context_size,
1762                         u3d->ep_context, u3d->ep_context_dma);
1763
1764         kfree(u3d->eps);
1765
1766         if (u3d->irq)
1767                 free_irq(u3d->irq, u3d);
1768
1769         if (u3d->cap_regs)
1770                 iounmap(u3d->cap_regs);
1771         u3d->cap_regs = NULL;
1772
1773         kfree(u3d->status_req);
1774
1775         clk_put(u3d->clk);
1776
1777         kfree(u3d);
1778
1779         return 0;
1780 }
1781
1782 static int mv_u3d_probe(struct platform_device *dev)
1783 {
1784         struct mv_u3d *u3d = NULL;
1785         struct mv_usb_platform_data *pdata = dev_get_platdata(&dev->dev);
1786         int retval = 0;
1787         struct resource *r;
1788         size_t size;
1789
1790         if (!dev_get_platdata(&dev->dev)) {
1791                 dev_err(&dev->dev, "missing platform_data\n");
1792                 retval = -ENODEV;
1793                 goto err_pdata;
1794         }
1795
1796         u3d = kzalloc(sizeof(*u3d), GFP_KERNEL);
1797         if (!u3d) {
1798                 retval = -ENOMEM;
1799                 goto err_alloc_private;
1800         }
1801
1802         spin_lock_init(&u3d->lock);
1803
1804         platform_set_drvdata(dev, u3d);
1805
1806         u3d->dev = &dev->dev;
1807         u3d->vbus = pdata->vbus;
1808
1809         u3d->clk = clk_get(&dev->dev, NULL);
1810         if (IS_ERR(u3d->clk)) {
1811                 retval = PTR_ERR(u3d->clk);
1812                 goto err_get_clk;
1813         }
1814
1815         r = platform_get_resource_byname(dev, IORESOURCE_MEM, "capregs");
1816         if (!r) {
1817                 dev_err(&dev->dev, "no I/O memory resource defined\n");
1818                 retval = -ENODEV;
1819                 goto err_get_cap_regs;
1820         }
1821
1822         u3d->cap_regs = (struct mv_u3d_cap_regs __iomem *)
1823                 ioremap(r->start, resource_size(r));
1824         if (!u3d->cap_regs) {
1825                 dev_err(&dev->dev, "failed to map I/O memory\n");
1826                 retval = -EBUSY;
1827                 goto err_map_cap_regs;
1828         } else {
1829                 dev_dbg(&dev->dev, "cap_regs address: 0x%lx/0x%lx\n",
1830                         (unsigned long) r->start,
1831                         (unsigned long) u3d->cap_regs);
1832         }
1833
1834         /* we will access controller register, so enable the u3d controller */
1835         retval = clk_enable(u3d->clk);
1836         if (retval) {
1837                 dev_err(&dev->dev, "clk_enable error %d\n", retval);
1838                 goto err_u3d_enable;
1839         }
1840
1841         if (pdata->phy_init) {
1842                 retval = pdata->phy_init(u3d->phy_regs);
1843                 if (retval) {
1844                         dev_err(&dev->dev, "init phy error %d\n", retval);
1845                         clk_disable(u3d->clk);
1846                         goto err_phy_init;
1847                 }
1848         }
1849
1850         u3d->op_regs = (struct mv_u3d_op_regs __iomem *)(u3d->cap_regs
1851                 + MV_U3D_USB3_OP_REGS_OFFSET);
1852
1853         u3d->vuc_regs = (struct mv_u3d_vuc_regs __iomem *)(u3d->cap_regs
1854                 + ioread32(&u3d->cap_regs->vuoff));
1855
1856         u3d->max_eps = 16;
1857
1858         /*
1859          * some platform will use usb to download image, it may not disconnect
1860          * usb gadget before loading kernel. So first stop u3d here.
1861          */
1862         mv_u3d_controller_stop(u3d);
1863         iowrite32(0xFFFFFFFF, &u3d->vuc_regs->intrcause);
1864
1865         if (pdata->phy_deinit)
1866                 pdata->phy_deinit(u3d->phy_regs);
1867         clk_disable(u3d->clk);
1868
1869         size = u3d->max_eps * sizeof(struct mv_u3d_ep_context) * 2;
1870         size = (size + MV_U3D_EP_CONTEXT_ALIGNMENT - 1)
1871                 & ~(MV_U3D_EP_CONTEXT_ALIGNMENT - 1);
1872         u3d->ep_context = dma_alloc_coherent(&dev->dev, size,
1873                                         &u3d->ep_context_dma, GFP_KERNEL);
1874         if (!u3d->ep_context) {
1875                 dev_err(&dev->dev, "allocate ep context memory failed\n");
1876                 retval = -ENOMEM;
1877                 goto err_alloc_ep_context;
1878         }
1879         u3d->ep_context_size = size;
1880
1881         /* create TRB dma_pool resource */
1882         u3d->trb_pool = dma_pool_create("u3d_trb",
1883                         &dev->dev,
1884                         sizeof(struct mv_u3d_trb_hw),
1885                         MV_U3D_TRB_ALIGNMENT,
1886                         MV_U3D_DMA_BOUNDARY);
1887
1888         if (!u3d->trb_pool) {
1889                 retval = -ENOMEM;
1890                 goto err_alloc_trb_pool;
1891         }
1892
1893         size = u3d->max_eps * sizeof(struct mv_u3d_ep) * 2;
1894         u3d->eps = kzalloc(size, GFP_KERNEL);
1895         if (!u3d->eps) {
1896                 retval = -ENOMEM;
1897                 goto err_alloc_eps;
1898         }
1899
1900         /* initialize ep0 status request structure */
1901         u3d->status_req = kzalloc(sizeof(struct mv_u3d_req) + 8, GFP_KERNEL);
1902         if (!u3d->status_req) {
1903                 retval = -ENOMEM;
1904                 goto err_alloc_status_req;
1905         }
1906         INIT_LIST_HEAD(&u3d->status_req->queue);
1907
1908         /* allocate a small amount of memory to get valid address */
1909         u3d->status_req->req.buf = (char *)u3d->status_req
1910                                         + sizeof(struct mv_u3d_req);
1911         u3d->status_req->req.dma = virt_to_phys(u3d->status_req->req.buf);
1912
1913         u3d->resume_state = USB_STATE_NOTATTACHED;
1914         u3d->usb_state = USB_STATE_ATTACHED;
1915         u3d->ep0_dir = MV_U3D_EP_DIR_OUT;
1916         u3d->remote_wakeup = 0;
1917
1918         r = platform_get_resource(dev, IORESOURCE_IRQ, 0);
1919         if (!r) {
1920                 dev_err(&dev->dev, "no IRQ resource defined\n");
1921                 retval = -ENODEV;
1922                 goto err_get_irq;
1923         }
1924         u3d->irq = r->start;
1925
1926         /* initialize gadget structure */
1927         u3d->gadget.ops = &mv_u3d_ops;  /* usb_gadget_ops */
1928         u3d->gadget.ep0 = &u3d->eps[1].ep;      /* gadget ep0 */
1929         INIT_LIST_HEAD(&u3d->gadget.ep_list);   /* ep_list */
1930         u3d->gadget.speed = USB_SPEED_UNKNOWN;  /* speed */
1931
1932         /* the "gadget" abstracts/virtualizes the controller */
1933         u3d->gadget.name = driver_name;         /* gadget name */
1934
1935         mv_u3d_eps_init(u3d);
1936
1937         if (request_irq(u3d->irq, mv_u3d_irq,
1938                 IRQF_SHARED, driver_name, u3d)) {
1939                 u3d->irq = 0;
1940                 dev_err(&dev->dev, "Request irq %d for u3d failed\n",
1941                         u3d->irq);
1942                 retval = -ENODEV;
1943                 goto err_request_irq;
1944         }
1945
1946         /* external vbus detection */
1947         if (u3d->vbus) {
1948                 u3d->clock_gating = 1;
1949                 dev_err(&dev->dev, "external vbus detection\n");
1950         }
1951
1952         if (!u3d->clock_gating)
1953                 u3d->vbus_active = 1;
1954
1955         /* enable usb3 controller vbus detection */
1956         u3d->vbus_valid_detect = 1;
1957
1958         retval = usb_add_gadget_udc(&dev->dev, &u3d->gadget);
1959         if (retval)
1960                 goto err_unregister;
1961
1962         dev_dbg(&dev->dev, "successful probe usb3 device %s clock gating.\n",
1963                 u3d->clock_gating ? "with" : "without");
1964
1965         return 0;
1966
1967 err_unregister:
1968         free_irq(u3d->irq, u3d);
1969 err_get_irq:
1970 err_request_irq:
1971         kfree(u3d->status_req);
1972 err_alloc_status_req:
1973         kfree(u3d->eps);
1974 err_alloc_eps:
1975         dma_pool_destroy(u3d->trb_pool);
1976 err_alloc_trb_pool:
1977         dma_free_coherent(&dev->dev, u3d->ep_context_size,
1978                 u3d->ep_context, u3d->ep_context_dma);
1979 err_alloc_ep_context:
1980 err_phy_init:
1981 err_u3d_enable:
1982         iounmap(u3d->cap_regs);
1983 err_map_cap_regs:
1984 err_get_cap_regs:
1985         clk_put(u3d->clk);
1986 err_get_clk:
1987         kfree(u3d);
1988 err_alloc_private:
1989 err_pdata:
1990         return retval;
1991 }
1992
1993 #ifdef CONFIG_PM_SLEEP
1994 static int mv_u3d_suspend(struct device *dev)
1995 {
1996         struct mv_u3d *u3d = dev_get_drvdata(dev);
1997
1998         /*
1999          * only cable is unplugged, usb can suspend.
2000          * So do not care about clock_gating == 1, it is handled by
2001          * vbus session.
2002          */
2003         if (!u3d->clock_gating) {
2004                 mv_u3d_controller_stop(u3d);
2005
2006                 spin_lock_irq(&u3d->lock);
2007                 /* stop all usb activities */
2008                 mv_u3d_stop_activity(u3d, u3d->driver);
2009                 spin_unlock_irq(&u3d->lock);
2010
2011                 mv_u3d_disable(u3d);
2012         }
2013
2014         return 0;
2015 }
2016
2017 static int mv_u3d_resume(struct device *dev)
2018 {
2019         struct mv_u3d *u3d = dev_get_drvdata(dev);
2020         int retval;
2021
2022         if (!u3d->clock_gating) {
2023                 retval = mv_u3d_enable(u3d);
2024                 if (retval)
2025                         return retval;
2026
2027                 if (u3d->driver && u3d->softconnect) {
2028                         mv_u3d_controller_reset(u3d);
2029                         mv_u3d_ep0_reset(u3d);
2030                         mv_u3d_controller_start(u3d);
2031                 }
2032         }
2033
2034         return 0;
2035 }
2036 #endif
2037
2038 static SIMPLE_DEV_PM_OPS(mv_u3d_pm_ops, mv_u3d_suspend, mv_u3d_resume);
2039
2040 static void mv_u3d_shutdown(struct platform_device *dev)
2041 {
2042         struct mv_u3d *u3d = platform_get_drvdata(dev);
2043         u32 tmp;
2044
2045         tmp = ioread32(&u3d->op_regs->usbcmd);
2046         tmp &= ~MV_U3D_CMD_RUN_STOP;
2047         iowrite32(tmp, &u3d->op_regs->usbcmd);
2048 }
2049
2050 static struct platform_driver mv_u3d_driver = {
2051         .probe          = mv_u3d_probe,
2052         .remove         = mv_u3d_remove,
2053         .shutdown       = mv_u3d_shutdown,
2054         .driver         = {
2055                 .name   = "mv-u3d",
2056                 .pm     = &mv_u3d_pm_ops,
2057         },
2058 };
2059
2060 module_platform_driver(mv_u3d_driver);
2061 MODULE_ALIAS("platform:mv-u3d");
2062 MODULE_DESCRIPTION(DRIVER_DESC);
2063 MODULE_AUTHOR("Yu Xu <[email protected]>");
2064 MODULE_LICENSE("GPL");