drivers/media/i2c/ov6650.c

   1 // SPDX-License-Identifier: GPL-2.0-only
   2 /*
   3  * V4L2 subdevice driver for OmniVision OV6650 Camera Sensor
   4  *
   5  * Copyright (C) 2010 Janusz Krzysztofik <[email protected]>
   6  *
   7  * Based on OmniVision OV96xx Camera Driver
   8  * Copyright (C) 2009 Marek Vasut <[email protected]>
   9  *
  10  * Based on ov772x camera driver:
  11  * Copyright (C) 2008 Renesas Solutions Corp.
  12  * Kuninori Morimoto <[email protected]>
  13  *
  14  * Based on ov7670 and soc_camera_platform driver,
  15  * Copyright 2006-7 Jonathan Corbet <[email protected]>
  16  * Copyright (C) 2008 Magnus Damm
  17  * Copyright (C) 2008, Guennadi Liakhovetski <[email protected]>
  18  *
  19  * Hardware specific bits initially based on former work by Matt Callow
  20  * drivers/media/video/omap/sensor_ov6650.c
  21  * Copyright (C) 2006 Matt Callow
  22  */
  23
  24 #include <linux/bitops.h>
  25 #include <linux/clk.h>
  26 #include <linux/delay.h>
  27 #include <linux/i2c.h>
  28 #include <linux/slab.h>
  29 #include <linux/v4l2-mediabus.h>
  30 #include <linux/module.h>
  31
  32 #include <media/v4l2-ctrls.h>
  33 #include <media/v4l2-device.h>
  34
  35 /* Register definitions */
  36 #define REG_GAIN                0x00    /* range 00 - 3F */
  37 #define REG_BLUE                0x01
  38 #define REG_RED                 0x02
  39 #define REG_SAT                 0x03    /* [7:4] saturation [0:3] reserved */
  40 #define REG_HUE                 0x04    /* [7:6] rsrvd [5] hue en [4:0] hue */
  41
  42 #define REG_BRT                 0x06
  43
  44 #define REG_PIDH                0x0a
  45 #define REG_PIDL                0x0b
  46
  47 #define REG_AECH                0x10
  48 #define REG_CLKRC               0x11    /* Data Format and Internal Clock */
  49                                         /* [7:6] Input system clock (MHz)*/
  50                                         /*   00=8, 01=12, 10=16, 11=24 */
  51                                         /* [5:0]: Internal Clock Pre-Scaler */
  52 #define REG_COMA                0x12    /* [7] Reset */
  53 #define REG_COMB                0x13
  54 #define REG_COMC                0x14
  55 #define REG_COMD                0x15
  56 #define REG_COML                0x16
  57 #define REG_HSTRT               0x17
  58 #define REG_HSTOP               0x18
  59 #define REG_VSTRT               0x19
  60 #define REG_VSTOP               0x1a
  61 #define REG_PSHFT               0x1b
  62 #define REG_MIDH                0x1c
  63 #define REG_MIDL                0x1d
  64 #define REG_HSYNS               0x1e
  65 #define REG_HSYNE               0x1f
  66 #define REG_COME                0x20
  67 #define REG_YOFF                0x21
  68 #define REG_UOFF                0x22
  69 #define REG_VOFF                0x23
  70 #define REG_AEW                 0x24
  71 #define REG_AEB                 0x25
  72 #define REG_COMF                0x26
  73 #define REG_COMG                0x27
  74 #define REG_COMH                0x28
  75 #define REG_COMI                0x29
  76
  77 #define REG_FRARL               0x2b
  78 #define REG_COMJ                0x2c
  79 #define REG_COMK                0x2d
  80 #define REG_AVGY                0x2e
  81 #define REG_REF0                0x2f
  82 #define REG_REF1                0x30
  83 #define REG_REF2                0x31
  84 #define REG_FRAJH               0x32
  85 #define REG_FRAJL               0x33
  86 #define REG_FACT                0x34
  87 #define REG_L1AEC               0x35
  88 #define REG_AVGU                0x36
  89 #define REG_AVGV                0x37
  90
  91 #define REG_SPCB                0x60
  92 #define REG_SPCC                0x61
  93 #define REG_GAM1                0x62
  94 #define REG_GAM2                0x63
  95 #define REG_GAM3                0x64
  96 #define REG_SPCD                0x65
  97
  98 #define REG_SPCE                0x68
  99 #define REG_ADCL                0x69
 100
 101 #define REG_RMCO                0x6c
 102 #define REG_GMCO                0x6d
 103 #define REG_BMCO                0x6e
 104
 105
 106 /* Register bits, values, etc. */
 107 #define OV6650_PIDH             0x66    /* high byte of product ID number */
 108 #define OV6650_PIDL             0x50    /* low byte of product ID number */
 109 #define OV6650_MIDH             0x7F    /* high byte of mfg ID */
 110 #define OV6650_MIDL             0xA2    /* low byte of mfg ID */
 111
 112 #define DEF_GAIN                0x00
 113 #define DEF_BLUE                0x80
 114 #define DEF_RED                 0x80
 115
 116 #define SAT_SHIFT               4
 117 #define SAT_MASK                (0xf << SAT_SHIFT)
 118 #define SET_SAT(x)              (((x) << SAT_SHIFT) & SAT_MASK)
 119
 120 #define HUE_EN                  BIT(5)
 121 #define HUE_MASK                0x1f
 122 #define DEF_HUE                 0x10
 123 #define SET_HUE(x)              (HUE_EN | ((x) & HUE_MASK))
 124
 125 #define DEF_AECH                0x4D
 126
 127 #define CLKRC_8MHz              0x00
 128 #define CLKRC_12MHz             0x40
 129 #define CLKRC_16MHz             0x80
 130 #define CLKRC_24MHz             0xc0
 131 #define CLKRC_DIV_MASK          0x3f
 132 #define GET_CLKRC_DIV(x)        (((x) & CLKRC_DIV_MASK) + 1)
 133 #define DEF_CLKRC               0x00
 134
 135 #define COMA_RESET              BIT(7)
 136 #define COMA_QCIF               BIT(5)
 137 #define COMA_RAW_RGB            BIT(4)
 138 #define COMA_RGB                BIT(3)
 139 #define COMA_BW                 BIT(2)
 140 #define COMA_WORD_SWAP          BIT(1)
 141 #define COMA_BYTE_SWAP          BIT(0)
 142 #define DEF_COMA                0x00
 143
 144 #define COMB_FLIP_V             BIT(7)
 145 #define COMB_FLIP_H             BIT(5)
 146 #define COMB_BAND_FILTER        BIT(4)
 147 #define COMB_AWB                BIT(2)
 148 #define COMB_AGC                BIT(1)
 149 #define COMB_AEC                BIT(0)
 150 #define DEF_COMB                0x5f
 151
 152 #define COML_ONE_CHANNEL        BIT(7)
 153
 154 #define DEF_HSTRT               0x24
 155 #define DEF_HSTOP               0xd4
 156 #define DEF_VSTRT               0x04
 157 #define DEF_VSTOP               0x94
 158
 159 #define COMF_HREF_LOW           BIT(4)
 160
 161 #define COMJ_PCLK_RISING        BIT(4)
 162 #define COMJ_VSYNC_HIGH         BIT(0)
 163
 164 /* supported resolutions */
 165 #define W_QCIF                  (DEF_HSTOP - DEF_HSTRT)
 166 #define W_CIF                   (W_QCIF << 1)
 167 #define H_QCIF                  (DEF_VSTOP - DEF_VSTRT)
 168 #define H_CIF                   (H_QCIF << 1)
 169
 170 #define FRAME_RATE_MAX          30
 171
 172
 173 struct ov6650_reg {
 174         u8      reg;
 175         u8      val;
 176 };
 177
 178 struct ov6650 {
 179         struct v4l2_subdev      subdev;
 180         struct v4l2_ctrl_handler hdl;
 181         struct {
 182                 /* exposure/autoexposure cluster */
 183                 struct v4l2_ctrl *autoexposure;
 184                 struct v4l2_ctrl *exposure;
 185         };
 186         struct {
 187                 /* gain/autogain cluster */
 188                 struct v4l2_ctrl *autogain;
 189                 struct v4l2_ctrl *gain;
 190         };
 191         struct {
 192                 /* blue/red/autowhitebalance cluster */
 193                 struct v4l2_ctrl *autowb;
 194                 struct v4l2_ctrl *blue;
 195                 struct v4l2_ctrl *red;
 196         };
 197         struct clk              *clk;
 198         bool                    half_scale;     /* scale down output by 2 */
 199         struct v4l2_rect        rect;           /* sensor cropping window */
 200         struct v4l2_fract       tpf;            /* as requested with s_frame_interval */
 201         u32 code;
 202 };
 203
 204 struct ov6650_xclk {
 205         unsigned long   rate;
 206         u8              clkrc;
 207 };
 208
 209 static const struct ov6650_xclk ov6650_xclk[] = {
 210 {
 211         .rate   = 8000000,
 212         .clkrc  = CLKRC_8MHz,
 213 },
 214 {
 215         .rate   = 12000000,
 216         .clkrc  = CLKRC_12MHz,
 217 },
 218 {
 219         .rate   = 16000000,
 220         .clkrc  = CLKRC_16MHz,
 221 },
 222 {
 223         .rate   = 24000000,
 224         .clkrc  = CLKRC_24MHz,
 225 },
 226 };
 227
 228 static u32 ov6650_codes[] = {
 229         MEDIA_BUS_FMT_YUYV8_2X8,
 230         MEDIA_BUS_FMT_UYVY8_2X8,
 231         MEDIA_BUS_FMT_YVYU8_2X8,
 232         MEDIA_BUS_FMT_VYUY8_2X8,
 233         MEDIA_BUS_FMT_SBGGR8_1X8,
 234         MEDIA_BUS_FMT_Y8_1X8,
 235 };
 236
 237 static const struct v4l2_mbus_framefmt ov6650_def_fmt = {
 238         .width          = W_CIF,
 239         .height         = H_CIF,
 240         .code           = MEDIA_BUS_FMT_SBGGR8_1X8,
 241         .colorspace     = V4L2_COLORSPACE_SRGB,
 242         .field          = V4L2_FIELD_NONE,
 243         .ycbcr_enc      = V4L2_YCBCR_ENC_DEFAULT,
 244         .quantization   = V4L2_QUANTIZATION_DEFAULT,
 245         .xfer_func      = V4L2_XFER_FUNC_DEFAULT,
 246 };
 247
 248 /* read a register */
 249 static int ov6650_reg_read(struct i2c_client *client, u8 reg, u8 *val)
 250 {
 251         int ret;
 252         u8 data = reg;
 253         struct i2c_msg msg = {
 254                 .addr   = client->addr,
 255                 .flags  = 0,
 256                 .len    = 1,
 257                 .buf    = &data,
 258         };
 259
 260         ret = i2c_transfer(client->adapter, &msg, 1);
 261         if (ret < 0)
 262                 goto err;
 263
 264         msg.flags = I2C_M_RD;
 265         ret = i2c_transfer(client->adapter, &msg, 1);
 266         if (ret < 0)
 267                 goto err;
 268
 269         *val = data;
 270         return 0;
 271
 272 err:
 273         dev_err(&client->dev, "Failed reading register 0x%02x!\n", reg);
 274         return ret;
 275 }
 276
 277 /* write a register */
 278 static int ov6650_reg_write(struct i2c_client *client, u8 reg, u8 val)
 279 {
 280         int ret;
 281         unsigned char data[2] = { reg, val };
 282         struct i2c_msg msg = {
 283                 .addr   = client->addr,
 284                 .flags  = 0,
 285                 .len    = 2,
 286                 .buf    = data,
 287         };
 288
 289         ret = i2c_transfer(client->adapter, &msg, 1);
 290         udelay(100);
 291
 292         if (ret < 0) {
 293                 dev_err(&client->dev, "Failed writing register 0x%02x!\n", reg);
 294                 return ret;
 295         }
 296         return 0;
 297 }
 298
 299
 300 /* Read a register, alter its bits, write it back */
 301 static int ov6650_reg_rmw(struct i2c_client *client, u8 reg, u8 set, u8 mask)
 302 {
 303         u8 val;
 304         int ret;
 305
 306         ret = ov6650_reg_read(client, reg, &val);
 307         if (ret) {
 308                 dev_err(&client->dev,
 309                         "[Read]-Modify-Write of register 0x%02x failed!\n",
 310                         reg);
 311                 return ret;
 312         }
 313
 314         val &= ~mask;
 315         val |= set;
 316
 317         ret = ov6650_reg_write(client, reg, val);
 318         if (ret)
 319                 dev_err(&client->dev,
 320                         "Read-Modify-[Write] of register 0x%02x failed!\n",
 321                         reg);
 322
 323         return ret;
 324 }
 325
 326 static struct ov6650 *to_ov6650(const struct i2c_client *client)
 327 {
 328         return container_of(i2c_get_clientdata(client), struct ov6650, subdev);
 329 }
 330
 331 /* Start/Stop streaming from the device */
 332 static int ov6650_s_stream(struct v4l2_subdev *sd, int enable)
 333 {
 334         return 0;
 335 }
 336
 337 /* Get status of additional camera capabilities */
 338 static int ov6550_g_volatile_ctrl(struct v4l2_ctrl *ctrl)
 339 {
 340         struct ov6650 *priv = container_of(ctrl->handler, struct ov6650, hdl);
 341         struct v4l2_subdev *sd = &priv->subdev;
 342         struct i2c_client *client = v4l2_get_subdevdata(sd);
 343         uint8_t reg, reg2;
 344         int ret;
 345
 346         switch (ctrl->id) {
 347         case V4L2_CID_AUTOGAIN:
 348                 ret = ov6650_reg_read(client, REG_GAIN, &reg);
 349                 if (!ret)
 350                         priv->gain->val = reg;
 351                 return ret;
 352         case V4L2_CID_AUTO_WHITE_BALANCE:
 353                 ret = ov6650_reg_read(client, REG_BLUE, &reg);
 354                 if (!ret)
 355                         ret = ov6650_reg_read(client, REG_RED, &reg2);
 356                 if (!ret) {
 357                         priv->blue->val = reg;
 358                         priv->red->val = reg2;
 359                 }
 360                 return ret;
 361         case V4L2_CID_EXPOSURE_AUTO:
 362                 ret = ov6650_reg_read(client, REG_AECH, &reg);
 363                 if (!ret)
 364                         priv->exposure->val = reg;
 365                 return ret;
 366         }
 367         return -EINVAL;
 368 }
 369
 370 /* Set status of additional camera capabilities */
 371 static int ov6550_s_ctrl(struct v4l2_ctrl *ctrl)
 372 {
 373         struct ov6650 *priv = container_of(ctrl->handler, struct ov6650, hdl);
 374         struct v4l2_subdev *sd = &priv->subdev;
 375         struct i2c_client *client = v4l2_get_subdevdata(sd);
 376         int ret;
 377
 378         switch (ctrl->id) {
 379         case V4L2_CID_AUTOGAIN:
 380                 ret = ov6650_reg_rmw(client, REG_COMB,
 381                                 ctrl->val ? COMB_AGC : 0, COMB_AGC);
 382                 if (!ret && !ctrl->val)
 383                         ret = ov6650_reg_write(client, REG_GAIN, priv->gain->val);
 384                 return ret;
 385         case V4L2_CID_AUTO_WHITE_BALANCE:
 386                 ret = ov6650_reg_rmw(client, REG_COMB,
 387                                 ctrl->val ? COMB_AWB : 0, COMB_AWB);
 388                 if (!ret && !ctrl->val) {
 389                         ret = ov6650_reg_write(client, REG_BLUE, priv->blue->val);
 390                         if (!ret)
 391                                 ret = ov6650_reg_write(client, REG_RED,
 392                                                         priv->red->val);
 393                 }
 394                 return ret;
 395         case V4L2_CID_SATURATION:
 396                 return ov6650_reg_rmw(client, REG_SAT, SET_SAT(ctrl->val),
 397                                 SAT_MASK);
 398         case V4L2_CID_HUE:
 399                 return ov6650_reg_rmw(client, REG_HUE, SET_HUE(ctrl->val),
 400                                 HUE_MASK);
 401         case V4L2_CID_BRIGHTNESS:
 402                 return ov6650_reg_write(client, REG_BRT, ctrl->val);
 403         case V4L2_CID_EXPOSURE_AUTO:
 404                 ret = ov6650_reg_rmw(client, REG_COMB, ctrl->val ==
 405                                 V4L2_EXPOSURE_AUTO ? COMB_AEC : 0, COMB_AEC);
 406                 if (!ret && ctrl->val == V4L2_EXPOSURE_MANUAL)
 407                         ret = ov6650_reg_write(client, REG_AECH,
 408                                                 priv->exposure->val);
 409                 return ret;
 410         case V4L2_CID_GAMMA:
 411                 return ov6650_reg_write(client, REG_GAM1, ctrl->val);
 412         case V4L2_CID_VFLIP:
 413                 return ov6650_reg_rmw(client, REG_COMB,
 414                                 ctrl->val ? COMB_FLIP_V : 0, COMB_FLIP_V);
 415         case V4L2_CID_HFLIP:
 416                 return ov6650_reg_rmw(client, REG_COMB,
 417                                 ctrl->val ? COMB_FLIP_H : 0, COMB_FLIP_H);
 418         }
 419
 420         return -EINVAL;
 421 }
 422
 423 #ifdef CONFIG_VIDEO_ADV_DEBUG
 424 static int ov6650_get_register(struct v4l2_subdev *sd,
 425                                 struct v4l2_dbg_register *reg)
 426 {
 427         struct i2c_client *client = v4l2_get_subdevdata(sd);
 428         int ret;
 429         u8 val;
 430
 431         if (reg->reg & ~0xff)
 432                 return -EINVAL;
 433
 434         reg->size = 1;
 435
 436         ret = ov6650_reg_read(client, reg->reg, &val);
 437         if (!ret)
 438                 reg->val = (__u64)val;
 439
 440         return ret;
 441 }
 442
 443 static int ov6650_set_register(struct v4l2_subdev *sd,
 444                                 const struct v4l2_dbg_register *reg)
 445 {
 446         struct i2c_client *client = v4l2_get_subdevdata(sd);
 447
 448         if (reg->reg & ~0xff || reg->val & ~0xff)
 449                 return -EINVAL;
 450
 451         return ov6650_reg_write(client, reg->reg, reg->val);
 452 }
 453 #endif
 454
 455 static int ov6650_s_power(struct v4l2_subdev *sd, int on)
 456 {
 457         struct i2c_client *client = v4l2_get_subdevdata(sd);
 458         struct ov6650 *priv = to_ov6650(client);
 459         int ret = 0;
 460
 461         if (on)
 462                 ret = clk_prepare_enable(priv->clk);
 463         else
 464                 clk_disable_unprepare(priv->clk);
 465
 466         return ret;
 467 }
 468
 469 static int ov6650_get_selection(struct v4l2_subdev *sd,
 470                 struct v4l2_subdev_state *sd_state,
 471                 struct v4l2_subdev_selection *sel)
 472 {
 473         struct i2c_client *client = v4l2_get_subdevdata(sd);
 474         struct ov6650 *priv = to_ov6650(client);
 475         struct v4l2_rect *rect;
 476
 477         if (sel->which == V4L2_SUBDEV_FORMAT_TRY) {
 478                 /* pre-select try crop rectangle */
 479                 rect = &sd_state->pads->try_crop;
 480
 481         } else {
 482                 /* pre-select active crop rectangle */
 483                 rect = &priv->rect;
 484         }
 485
 486         switch (sel->target) {
 487         case V4L2_SEL_TGT_CROP_BOUNDS:
 488                 sel->r.left = DEF_HSTRT << 1;
 489                 sel->r.top = DEF_VSTRT << 1;
 490                 sel->r.width = W_CIF;
 491                 sel->r.height = H_CIF;
 492                 return 0;
 493
 494         case V4L2_SEL_TGT_CROP:
 495                 /* use selected crop rectangle */
 496                 sel->r = *rect;
 497                 return 0;
 498
 499         default:
 500                 return -EINVAL;
 501         }
 502 }
 503
 504 static bool is_unscaled_ok(int width, int height, struct v4l2_rect *rect)
 505 {
 506         return width > rect->width >> 1 || height > rect->height >> 1;
 507 }
 508
 509 static void ov6650_bind_align_crop_rectangle(struct v4l2_rect *rect)
 510 {
 511         v4l_bound_align_image(&rect->width, 2, W_CIF, 1,
 512                               &rect->height, 2, H_CIF, 1, 0);
 513         v4l_bound_align_image(&rect->left, DEF_HSTRT << 1,
 514                               (DEF_HSTRT << 1) + W_CIF - (__s32)rect->width, 1,
 515                               &rect->top, DEF_VSTRT << 1,
 516                               (DEF_VSTRT << 1) + H_CIF - (__s32)rect->height,
 517                               1, 0);
 518 }
 519
 520 static int ov6650_set_selection(struct v4l2_subdev *sd,
 521                 struct v4l2_subdev_state *sd_state,
 522                 struct v4l2_subdev_selection *sel)
 523 {
 524         struct i2c_client *client = v4l2_get_subdevdata(sd);
 525         struct ov6650 *priv = to_ov6650(client);
 526         int ret;
 527
 528         if (sel->target != V4L2_SEL_TGT_CROP)
 529                 return -EINVAL;
 530
 531         ov6650_bind_align_crop_rectangle(&sel->r);
 532
 533         if (sel->which == V4L2_SUBDEV_FORMAT_TRY) {
 534                 struct v4l2_rect *crop = &sd_state->pads->try_crop;
 535                 struct v4l2_mbus_framefmt *mf = &sd_state->pads->try_fmt;
 536                 /* detect current pad config scaling factor */
 537                 bool half_scale = !is_unscaled_ok(mf->width, mf->height, crop);
 538
 539                 /* store new crop rectangle */
 540                 *crop = sel->r;
 541
 542                 /* adjust frame size */
 543                 mf->width = crop->width >> half_scale;
 544                 mf->height = crop->height >> half_scale;
 545
 546                 return 0;
 547         }
 548
 549         /* V4L2_SUBDEV_FORMAT_ACTIVE */
 550
 551         /* apply new crop rectangle */
 552         ret = ov6650_reg_write(client, REG_HSTRT, sel->r.left >> 1);
 553         if (!ret) {
 554                 priv->rect.width += priv->rect.left - sel->r.left;
 555                 priv->rect.left = sel->r.left;
 556                 ret = ov6650_reg_write(client, REG_HSTOP,
 557                                        (sel->r.left + sel->r.width) >> 1);
 558         }
 559         if (!ret) {
 560                 priv->rect.width = sel->r.width;
 561                 ret = ov6650_reg_write(client, REG_VSTRT, sel->r.top >> 1);
 562         }
 563         if (!ret) {
 564                 priv->rect.height += priv->rect.top - sel->r.top;
 565                 priv->rect.top = sel->r.top;
 566                 ret = ov6650_reg_write(client, REG_VSTOP,
 567                                        (sel->r.top + sel->r.height) >> 1);
 568         }
 569         if (!ret)
 570                 priv->rect.height = sel->r.height;
 571
 572         return ret;
 573 }
 574
 575 static int ov6650_get_fmt(struct v4l2_subdev *sd,
 576                 struct v4l2_subdev_state *sd_state,
 577                 struct v4l2_subdev_format *format)
 578 {
 579         struct v4l2_mbus_framefmt *mf = &format->format;
 580         struct i2c_client *client = v4l2_get_subdevdata(sd);
 581         struct ov6650 *priv = to_ov6650(client);
 582
 583         if (format->pad)
 584                 return -EINVAL;
 585
 586         /* initialize response with default media bus frame format */
 587         *mf = ov6650_def_fmt;
 588
 589         /* update media bus format code and frame size */
 590         if (format->which == V4L2_SUBDEV_FORMAT_TRY) {
 591                 mf->width = sd_state->pads->try_fmt.width;
 592                 mf->height = sd_state->pads->try_fmt.height;
 593                 mf->code = sd_state->pads->try_fmt.code;
 594
 595         } else {
 596                 mf->width = priv->rect.width >> priv->half_scale;
 597                 mf->height = priv->rect.height >> priv->half_scale;
 598                 mf->code = priv->code;
 599         }
 600         return 0;
 601 }
 602
 603 #define to_clkrc(div)   ((div) - 1)
 604
 605 /* set the format we will capture in */
 606 static int ov6650_s_fmt(struct v4l2_subdev *sd, u32 code, bool half_scale)
 607 {
 608         struct i2c_client *client = v4l2_get_subdevdata(sd);
 609         struct ov6650 *priv = to_ov6650(client);
 610         u8 coma_set = 0, coma_mask = 0, coml_set, coml_mask;
 611         int ret;
 612
 613         /* select color matrix configuration for given color encoding */
 614         switch (code) {
 615         case MEDIA_BUS_FMT_Y8_1X8:
 616                 dev_dbg(&client->dev, "pixel format GREY8_1X8\n");
 617                 coma_mask |= COMA_RGB | COMA_WORD_SWAP | COMA_BYTE_SWAP;
 618                 coma_set |= COMA_BW;
 619                 break;
 620         case MEDIA_BUS_FMT_YUYV8_2X8:
 621                 dev_dbg(&client->dev, "pixel format YUYV8_2X8_LE\n");
 622                 coma_mask |= COMA_RGB | COMA_BW | COMA_BYTE_SWAP;
 623                 coma_set |= COMA_WORD_SWAP;
 624                 break;
 625         case MEDIA_BUS_FMT_YVYU8_2X8:
 626                 dev_dbg(&client->dev, "pixel format YVYU8_2X8_LE (untested)\n");
 627                 coma_mask |= COMA_RGB | COMA_BW | COMA_WORD_SWAP |
 628                                 COMA_BYTE_SWAP;
 629                 break;
 630         case MEDIA_BUS_FMT_UYVY8_2X8:
 631                 dev_dbg(&client->dev, "pixel format YUYV8_2X8_BE\n");
 632                 if (half_scale) {
 633                         coma_mask |= COMA_RGB | COMA_BW | COMA_WORD_SWAP;
 634                         coma_set |= COMA_BYTE_SWAP;
 635                 } else {
 636                         coma_mask |= COMA_RGB | COMA_BW;
 637                         coma_set |= COMA_BYTE_SWAP | COMA_WORD_SWAP;
 638                 }
 639                 break;
 640         case MEDIA_BUS_FMT_VYUY8_2X8:
 641                 dev_dbg(&client->dev, "pixel format YVYU8_2X8_BE (untested)\n");
 642                 if (half_scale) {
 643                         coma_mask |= COMA_RGB | COMA_BW;
 644                         coma_set |= COMA_BYTE_SWAP | COMA_WORD_SWAP;
 645                 } else {
 646                         coma_mask |= COMA_RGB | COMA_BW | COMA_WORD_SWAP;
 647                         coma_set |= COMA_BYTE_SWAP;
 648                 }
 649                 break;
 650         case MEDIA_BUS_FMT_SBGGR8_1X8:
 651                 dev_dbg(&client->dev, "pixel format SBGGR8_1X8 (untested)\n");
 652                 coma_mask |= COMA_BW | COMA_BYTE_SWAP | COMA_WORD_SWAP;
 653                 coma_set |= COMA_RAW_RGB | COMA_RGB;
 654                 break;
 655         default:
 656                 dev_err(&client->dev, "Pixel format not handled: 0x%x\n", code);
 657                 return -EINVAL;
 658         }
 659
 660         if (code == MEDIA_BUS_FMT_Y8_1X8 ||
 661                         code == MEDIA_BUS_FMT_SBGGR8_1X8) {
 662                 coml_mask = COML_ONE_CHANNEL;
 663                 coml_set = 0;
 664         } else {
 665                 coml_mask = 0;
 666                 coml_set = COML_ONE_CHANNEL;
 667         }
 668
 669         if (half_scale) {
 670                 dev_dbg(&client->dev, "max resolution: QCIF\n");
 671                 coma_set |= COMA_QCIF;
 672         } else {
 673                 dev_dbg(&client->dev, "max resolution: CIF\n");
 674                 coma_mask |= COMA_QCIF;
 675         }
 676
 677         ret = ov6650_reg_rmw(client, REG_COMA, coma_set, coma_mask);
 678         if (!ret) {
 679                 priv->half_scale = half_scale;
 680
 681                 ret = ov6650_reg_rmw(client, REG_COML, coml_set, coml_mask);
 682         }
 683         if (!ret)
 684                 priv->code = code;
 685
 686         return ret;
 687 }
 688
 689 static int ov6650_set_fmt(struct v4l2_subdev *sd,
 690                 struct v4l2_subdev_state *sd_state,
 691                 struct v4l2_subdev_format *format)
 692 {
 693         struct v4l2_mbus_framefmt *mf = &format->format;
 694         struct i2c_client *client = v4l2_get_subdevdata(sd);
 695         struct ov6650 *priv = to_ov6650(client);
 696         struct v4l2_rect *crop;
 697         bool half_scale;
 698
 699         if (format->pad)
 700                 return -EINVAL;
 701
 702         switch (mf->code) {
 703         case MEDIA_BUS_FMT_Y10_1X10:
 704                 mf->code = MEDIA_BUS_FMT_Y8_1X8;
 705                 fallthrough;
 706         case MEDIA_BUS_FMT_Y8_1X8:
 707         case MEDIA_BUS_FMT_YVYU8_2X8:
 708         case MEDIA_BUS_FMT_YUYV8_2X8:
 709         case MEDIA_BUS_FMT_VYUY8_2X8:
 710         case MEDIA_BUS_FMT_UYVY8_2X8:
 711                 break;
 712         default:
 713                 mf->code = MEDIA_BUS_FMT_SBGGR8_1X8;
 714                 fallthrough;
 715         case MEDIA_BUS_FMT_SBGGR8_1X8:
 716                 break;
 717         }
 718
 719         if (format->which == V4L2_SUBDEV_FORMAT_TRY)
 720                 crop = &sd_state->pads->try_crop;
 721         else
 722                 crop = &priv->rect;
 723
 724         half_scale = !is_unscaled_ok(mf->width, mf->height, crop);
 725
 726         if (format->which == V4L2_SUBDEV_FORMAT_TRY) {
 727                 /* store new mbus frame format code and size in pad config */
 728                 sd_state->pads->try_fmt.width = crop->width >> half_scale;
 729                 sd_state->pads->try_fmt.height = crop->height >> half_scale;
 730                 sd_state->pads->try_fmt.code = mf->code;
 731
 732                 /* return default mbus frame format updated with pad config */
 733                 *mf = ov6650_def_fmt;
 734                 mf->width = sd_state->pads->try_fmt.width;
 735                 mf->height = sd_state->pads->try_fmt.height;
 736                 mf->code = sd_state->pads->try_fmt.code;
 737
 738         } else {
 739                 int ret = 0;
 740
 741                 /* apply new media bus frame format and scaling if changed */
 742                 if (mf->code != priv->code || half_scale != priv->half_scale)
 743                         ret = ov6650_s_fmt(sd, mf->code, half_scale);
 744                 if (ret)
 745                         return ret;
 746
 747                 /* return default format updated with active size and code */
 748                 *mf = ov6650_def_fmt;
 749                 mf->width = priv->rect.width >> priv->half_scale;
 750                 mf->height = priv->rect.height >> priv->half_scale;
 751                 mf->code = priv->code;
 752         }
 753         return 0;
 754 }
 755
 756 static int ov6650_enum_mbus_code(struct v4l2_subdev *sd,
 757                 struct v4l2_subdev_state *sd_state,
 758                 struct v4l2_subdev_mbus_code_enum *code)
 759 {
 760         if (code->pad || code->index >= ARRAY_SIZE(ov6650_codes))
 761                 return -EINVAL;
 762
 763         code->code = ov6650_codes[code->index];
 764         return 0;
 765 }
 766
 767 static int ov6650_enum_frame_interval(struct v4l2_subdev *sd,
 768                                     struct v4l2_subdev_state *sd_state,
 769                                     struct v4l2_subdev_frame_interval_enum *fie)
 770 {
 771         int i;
 772
 773         /* enumerate supported frame intervals not exceeding 1 second */
 774         if (fie->index > CLKRC_DIV_MASK ||
 775             GET_CLKRC_DIV(fie->index) > FRAME_RATE_MAX)
 776                 return -EINVAL;
 777
 778         for (i = 0; i < ARRAY_SIZE(ov6650_codes); i++)
 779                 if (fie->code == ov6650_codes[i])
 780                         break;
 781         if (i == ARRAY_SIZE(ov6650_codes))
 782                 return -EINVAL;
 783
 784         if (!fie->width || fie->width > W_CIF ||
 785             !fie->height || fie->height > H_CIF)
 786                 return -EINVAL;
 787
 788         fie->interval.numerator = GET_CLKRC_DIV(fie->index);
 789         fie->interval.denominator = FRAME_RATE_MAX;
 790
 791         return 0;
 792 }
 793
 794 static int ov6650_g_frame_interval(struct v4l2_subdev *sd,
 795                                    struct v4l2_subdev_frame_interval *ival)
 796 {
 797         struct i2c_client *client = v4l2_get_subdevdata(sd);
 798         struct ov6650 *priv = to_ov6650(client);
 799
 800         ival->interval = priv->tpf;
 801
 802         dev_dbg(&client->dev, "Frame interval: %u/%u s\n",
 803                 ival->interval.numerator, ival->interval.denominator);
 804
 805         return 0;
 806 }
 807
 808 static int ov6650_s_frame_interval(struct v4l2_subdev *sd,
 809                                    struct v4l2_subdev_frame_interval *ival)
 810 {
 811         struct i2c_client *client = v4l2_get_subdevdata(sd);
 812         struct ov6650 *priv = to_ov6650(client);
 813         struct v4l2_fract *tpf = &ival->interval;
 814         int div, ret;
 815
 816         if (tpf->numerator == 0 || tpf->denominator == 0)
 817                 div = 1;  /* Reset to full rate */
 818         else
 819                 div = (tpf->numerator * FRAME_RATE_MAX) / tpf->denominator;
 820
 821         if (div == 0)
 822                 div = 1;
 823         else if (div > GET_CLKRC_DIV(CLKRC_DIV_MASK))
 824                 div = GET_CLKRC_DIV(CLKRC_DIV_MASK);
 825
 826         ret = ov6650_reg_rmw(client, REG_CLKRC, to_clkrc(div), CLKRC_DIV_MASK);
 827         if (!ret) {
 828                 priv->tpf.numerator = div;
 829                 priv->tpf.denominator = FRAME_RATE_MAX;
 830
 831                 *tpf = priv->tpf;
 832         }
 833
 834         return ret;
 835 }
 836
 837 /* Soft reset the camera. This has nothing to do with the RESET pin! */
 838 static int ov6650_reset(struct i2c_client *client)
 839 {
 840         int ret;
 841
 842         dev_dbg(&client->dev, "reset\n");
 843
 844         ret = ov6650_reg_rmw(client, REG_COMA, COMA_RESET, 0);
 845         if (ret)
 846                 dev_err(&client->dev,
 847                         "An error occurred while entering soft reset!\n");
 848
 849         return ret;
 850 }
 851
 852 /* program default register values */
 853 static int ov6650_prog_dflt(struct i2c_client *client, u8 clkrc)
 854 {
 855         int ret;
 856
 857         dev_dbg(&client->dev, "initializing\n");
 858
 859         ret = ov6650_reg_write(client, REG_COMA, 0);    /* ~COMA_RESET */
 860         if (!ret)
 861                 ret = ov6650_reg_write(client, REG_CLKRC, clkrc);
 862         if (!ret)
 863                 ret = ov6650_reg_rmw(client, REG_COMB, 0, COMB_BAND_FILTER);
 864
 865         return ret;
 866 }
 867
 868 static int ov6650_video_probe(struct v4l2_subdev *sd)
 869 {
 870         struct i2c_client *client = v4l2_get_subdevdata(sd);
 871         struct ov6650 *priv = to_ov6650(client);
 872         const struct ov6650_xclk *xclk = NULL;
 873         unsigned long rate;
 874         u8 pidh, pidl, midh, midl;
 875         int i, ret = 0;
 876
 877         priv->clk = devm_clk_get(&client->dev, NULL);
 878         if (IS_ERR(priv->clk)) {
 879                 ret = PTR_ERR(priv->clk);
 880                 dev_err(&client->dev, "clk request err: %d\n", ret);
 881                 return ret;
 882         }
 883
 884         rate = clk_get_rate(priv->clk);
 885         for (i = 0; rate && i < ARRAY_SIZE(ov6650_xclk); i++) {
 886                 if (rate != ov6650_xclk[i].rate)
 887                         continue;
 888
 889                 xclk = &ov6650_xclk[i];
 890                 dev_info(&client->dev, "using host default clock rate %lukHz\n",
 891                          rate / 1000);
 892                 break;
 893         }
 894         for (i = 0; !xclk && i < ARRAY_SIZE(ov6650_xclk); i++) {
 895                 ret = clk_set_rate(priv->clk, ov6650_xclk[i].rate);
 896                 if (ret || clk_get_rate(priv->clk) != ov6650_xclk[i].rate)
 897                         continue;
 898
 899                 xclk = &ov6650_xclk[i];
 900                 dev_info(&client->dev, "using negotiated clock rate %lukHz\n",
 901                          xclk->rate / 1000);
 902                 break;
 903         }
 904         if (!xclk) {
 905                 dev_err(&client->dev, "unable to get supported clock rate\n");
 906                 if (!ret)
 907                         ret = -EINVAL;
 908                 return ret;
 909         }
 910
 911         ret = ov6650_s_power(sd, 1);
 912         if (ret < 0)
 913                 return ret;
 914
 915         msleep(20);
 916
 917         /*
 918          * check and show product ID and manufacturer ID
 919          */
 920         ret = ov6650_reg_read(client, REG_PIDH, &pidh);
 921         if (!ret)
 922                 ret = ov6650_reg_read(client, REG_PIDL, &pidl);
 923         if (!ret)
 924                 ret = ov6650_reg_read(client, REG_MIDH, &midh);
 925         if (!ret)
 926                 ret = ov6650_reg_read(client, REG_MIDL, &midl);
 927
 928         if (ret)
 929                 goto done;
 930
 931         if ((pidh != OV6650_PIDH) || (pidl != OV6650_PIDL)) {
 932                 dev_err(&client->dev, "Product ID error 0x%02x:0x%02x\n",
 933                                 pidh, pidl);
 934                 ret = -ENODEV;
 935                 goto done;
 936         }
 937
 938         dev_info(&client->dev,
 939                 "ov6650 Product ID 0x%02x:0x%02x Manufacturer ID 0x%02x:0x%02x\n",
 940                 pidh, pidl, midh, midl);
 941
 942         ret = ov6650_reset(client);
 943         if (!ret)
 944                 ret = ov6650_prog_dflt(client, xclk->clkrc);
 945         if (!ret) {
 946                 /* driver default frame format, no scaling */
 947                 ret = ov6650_s_fmt(sd, ov6650_def_fmt.code, false);
 948         }
 949         if (!ret)
 950                 ret = v4l2_ctrl_handler_setup(&priv->hdl);
 951
 952 done:
 953         ov6650_s_power(sd, 0);
 954         return ret;
 955 }
 956
 957 static const struct v4l2_ctrl_ops ov6550_ctrl_ops = {
 958         .g_volatile_ctrl = ov6550_g_volatile_ctrl,
 959         .s_ctrl = ov6550_s_ctrl,
 960 };
 961
 962 static const struct v4l2_subdev_core_ops ov6650_core_ops = {
 963 #ifdef CONFIG_VIDEO_ADV_DEBUG
 964         .g_register             = ov6650_get_register,
 965         .s_register             = ov6650_set_register,
 966 #endif
 967         .s_power                = ov6650_s_power,
 968 };
 969
 970 /* Request bus settings on camera side */
 971 static int ov6650_get_mbus_config(struct v4l2_subdev *sd,
 972                                   unsigned int pad,
 973                                   struct v4l2_mbus_config *cfg)
 974 {
 975         struct i2c_client *client = v4l2_get_subdevdata(sd);
 976         u8 comj, comf;
 977         int ret;
 978
 979         ret = ov6650_reg_read(client, REG_COMJ, &comj);
 980         if (ret)
 981                 return ret;
 982
 983         ret = ov6650_reg_read(client, REG_COMF, &comf);
 984         if (ret)
 985                 return ret;
 986
 987         cfg->type = V4L2_MBUS_PARALLEL;
 988
 989         cfg->bus.parallel.flags = V4L2_MBUS_MASTER | V4L2_MBUS_DATA_ACTIVE_HIGH
 990                 | ((comj & COMJ_VSYNC_HIGH)  ? V4L2_MBUS_VSYNC_ACTIVE_HIGH
 991                                              : V4L2_MBUS_VSYNC_ACTIVE_LOW)
 992                 | ((comf & COMF_HREF_LOW)    ? V4L2_MBUS_HSYNC_ACTIVE_LOW
 993                                              : V4L2_MBUS_HSYNC_ACTIVE_HIGH)
 994                 | ((comj & COMJ_PCLK_RISING) ? V4L2_MBUS_PCLK_SAMPLE_RISING
 995                                              : V4L2_MBUS_PCLK_SAMPLE_FALLING);
 996         return 0;
 997 }
 998
 999 static const struct v4l2_subdev_video_ops ov6650_video_ops = {
1000         .s_stream       = ov6650_s_stream,
1001         .g_frame_interval = ov6650_g_frame_interval,
1002         .s_frame_interval = ov6650_s_frame_interval,
1003 };
1004
1005 static const struct v4l2_subdev_pad_ops ov6650_pad_ops = {
1006         .enum_mbus_code         = ov6650_enum_mbus_code,
1007         .enum_frame_interval    = ov6650_enum_frame_interval,
1008         .get_selection          = ov6650_get_selection,
1009         .set_selection          = ov6650_set_selection,
1010         .get_fmt                = ov6650_get_fmt,
1011         .set_fmt                = ov6650_set_fmt,
1012         .get_mbus_config        = ov6650_get_mbus_config,
1013 };
1014
1015 static const struct v4l2_subdev_ops ov6650_subdev_ops = {
1016         .core   = &ov6650_core_ops,
1017         .video  = &ov6650_video_ops,
1018         .pad    = &ov6650_pad_ops,
1019 };
1020
1021 static const struct v4l2_subdev_internal_ops ov6650_internal_ops = {
1022         .registered = ov6650_video_probe,
1023 };
1024
1025 /*
1026  * i2c_driver function
1027  */
1028 static int ov6650_probe(struct i2c_client *client)
1029 {
1030         struct ov6650 *priv;
1031         int ret;
1032
1033         priv = devm_kzalloc(&client->dev, sizeof(*priv), GFP_KERNEL);
1034         if (!priv)
1035                 return -ENOMEM;
1036
1037         v4l2_i2c_subdev_init(&priv->subdev, client, &ov6650_subdev_ops);
1038         v4l2_ctrl_handler_init(&priv->hdl, 13);
1039         v4l2_ctrl_new_std(&priv->hdl, &ov6550_ctrl_ops,
1040                         V4L2_CID_VFLIP, 0, 1, 1, 0);
1041         v4l2_ctrl_new_std(&priv->hdl, &ov6550_ctrl_ops,
1042                         V4L2_CID_HFLIP, 0, 1, 1, 0);
1043         priv->autogain = v4l2_ctrl_new_std(&priv->hdl, &ov6550_ctrl_ops,
1044                         V4L2_CID_AUTOGAIN, 0, 1, 1, 1);
1045         priv->gain = v4l2_ctrl_new_std(&priv->hdl, &ov6550_ctrl_ops,
1046                         V4L2_CID_GAIN, 0, 0x3f, 1, DEF_GAIN);
1047         priv->autowb = v4l2_ctrl_new_std(&priv->hdl, &ov6550_ctrl_ops,
1048                         V4L2_CID_AUTO_WHITE_BALANCE, 0, 1, 1, 1);
1049         priv->blue = v4l2_ctrl_new_std(&priv->hdl, &ov6550_ctrl_ops,
1050                         V4L2_CID_BLUE_BALANCE, 0, 0xff, 1, DEF_BLUE);
1051         priv->red = v4l2_ctrl_new_std(&priv->hdl, &ov6550_ctrl_ops,
1052                         V4L2_CID_RED_BALANCE, 0, 0xff, 1, DEF_RED);
1053         v4l2_ctrl_new_std(&priv->hdl, &ov6550_ctrl_ops,
1054                         V4L2_CID_SATURATION, 0, 0xf, 1, 0x8);
1055         v4l2_ctrl_new_std(&priv->hdl, &ov6550_ctrl_ops,
1056                         V4L2_CID_HUE, 0, HUE_MASK, 1, DEF_HUE);
1057         v4l2_ctrl_new_std(&priv->hdl, &ov6550_ctrl_ops,
1058                         V4L2_CID_BRIGHTNESS, 0, 0xff, 1, 0x80);
1059         priv->autoexposure = v4l2_ctrl_new_std_menu(&priv->hdl,
1060                         &ov6550_ctrl_ops, V4L2_CID_EXPOSURE_AUTO,
1061                         V4L2_EXPOSURE_MANUAL, 0, V4L2_EXPOSURE_AUTO);
1062         priv->exposure = v4l2_ctrl_new_std(&priv->hdl, &ov6550_ctrl_ops,
1063                         V4L2_CID_EXPOSURE, 0, 0xff, 1, DEF_AECH);
1064         v4l2_ctrl_new_std(&priv->hdl, &ov6550_ctrl_ops,
1065                         V4L2_CID_GAMMA, 0, 0xff, 1, 0x12);
1066
1067         priv->subdev.ctrl_handler = &priv->hdl;
1068         if (priv->hdl.error) {
1069                 ret = priv->hdl.error;
1070                 goto ectlhdlfree;
1071         }
1072
1073         v4l2_ctrl_auto_cluster(2, &priv->autogain, 0, true);
1074         v4l2_ctrl_auto_cluster(3, &priv->autowb, 0, true);
1075         v4l2_ctrl_auto_cluster(2, &priv->autoexposure,
1076                                 V4L2_EXPOSURE_MANUAL, true);
1077
1078         priv->rect.left   = DEF_HSTRT << 1;
1079         priv->rect.top    = DEF_VSTRT << 1;
1080         priv->rect.width  = W_CIF;
1081         priv->rect.height = H_CIF;
1082
1083         /* Hardware default frame interval */
1084         priv->tpf.numerator   = GET_CLKRC_DIV(DEF_CLKRC);
1085         priv->tpf.denominator = FRAME_RATE_MAX;
1086
1087         priv->subdev.internal_ops = &ov6650_internal_ops;
1088
1089         ret = v4l2_async_register_subdev(&priv->subdev);
1090         if (!ret)
1091                 return 0;
1092 ectlhdlfree:
1093         v4l2_ctrl_handler_free(&priv->hdl);
1094
1095         return ret;
1096 }
1097
1098 static void ov6650_remove(struct i2c_client *client)
1099 {
1100         struct ov6650 *priv = to_ov6650(client);
1101
1102         v4l2_async_unregister_subdev(&priv->subdev);
1103         v4l2_ctrl_handler_free(&priv->hdl);
1104 }
1105
1106 static const struct i2c_device_id ov6650_id[] = {
1107         { "ov6650", 0 },
1108         { }
1109 };
1110 MODULE_DEVICE_TABLE(i2c, ov6650_id);
1111
1112 static struct i2c_driver ov6650_i2c_driver = {
1113         .driver = {
1114                 .name = "ov6650",
1115         },
1116         .probe_new = ov6650_probe,
1117         .remove   = ov6650_remove,
1118         .id_table = ov6650_id,
1119 };
1120
1121 module_i2c_driver(ov6650_i2c_driver);
1122
1123 MODULE_DESCRIPTION("V4L2 subdevice driver for OmniVision OV6650 camera sensor");
1124 MODULE_AUTHOR("Janusz Krzysztofik <[email protected]");
1125 MODULE_LICENSE("GPL v2");