1 // SPDX-License-Identifier: GPL-2.0
3 * Mediatek DSA Tag support
8 #include <linux/etherdevice.h>
9 #include <linux/if_vlan.h>
14 #define MTK_HDR_XMIT_UNTAGGED 0
15 #define MTK_HDR_XMIT_TAGGED_TPID_8100 1
16 #define MTK_HDR_RECV_SOURCE_PORT_MASK GENMASK(2, 0)
17 #define MTK_HDR_XMIT_DP_BIT_MASK GENMASK(5, 0)
18 #define MTK_HDR_XMIT_SA_DIS BIT(6)
20 static struct sk_buff *mtk_tag_xmit(struct sk_buff *skb,
21 struct net_device *dev)
23 struct dsa_port *dp = dsa_slave_to_port(dev);
25 bool is_vlan_skb = true;
26 unsigned char *dest = eth_hdr(skb)->h_dest;
27 bool is_multicast_skb = is_multicast_ether_addr(dest) &&
28 !is_broadcast_ether_addr(dest);
30 /* Build the special tag after the MAC Source Address. If VLAN header
31 * is present, it's required that VLAN header and special tag is
32 * being combined. Only in this way we can allow the switch can parse
33 * the both special and VLAN tag at the same time and then look up VLAN
36 if (!skb_vlan_tagged(skb)) {
37 if (skb_cow_head(skb, MTK_HDR_LEN) < 0)
40 skb_push(skb, MTK_HDR_LEN);
41 memmove(skb->data, skb->data + MTK_HDR_LEN, 2 * ETH_ALEN);
45 mtk_tag = skb->data + 2 * ETH_ALEN;
47 /* Mark tag attribute on special tag insertion to notify hardware
48 * whether that's a combined special tag with 802.1Q header.
50 mtk_tag[0] = is_vlan_skb ? MTK_HDR_XMIT_TAGGED_TPID_8100 :
51 MTK_HDR_XMIT_UNTAGGED;
52 mtk_tag[1] = (1 << dp->index) & MTK_HDR_XMIT_DP_BIT_MASK;
54 /* Disable SA learning for multicast frames */
55 if (unlikely(is_multicast_skb))
56 mtk_tag[1] |= MTK_HDR_XMIT_SA_DIS;
58 /* Tag control information is kept for 802.1Q */
67 static struct sk_buff *mtk_tag_rcv(struct sk_buff *skb, struct net_device *dev,
68 struct packet_type *pt)
73 unsigned char *dest = eth_hdr(skb)->h_dest;
74 bool is_multicast_skb = is_multicast_ether_addr(dest) &&
75 !is_broadcast_ether_addr(dest);
77 if (unlikely(!pskb_may_pull(skb, MTK_HDR_LEN)))
80 /* The MTK header is added by the switch between src addr
81 * and ethertype at this point, skb->data points to 2 bytes
82 * after src addr so header should be 2 bytes right before.
84 phdr = (__be16 *)(skb->data - 2);
87 /* Remove MTK tag and recalculate checksum. */
88 skb_pull_rcsum(skb, MTK_HDR_LEN);
90 memmove(skb->data - ETH_HLEN,
91 skb->data - ETH_HLEN - MTK_HDR_LEN,
94 /* Get source port information */
95 port = (hdr & MTK_HDR_RECV_SOURCE_PORT_MASK);
97 skb->dev = dsa_master_find_slave(dev, 0, port);
101 /* Only unicast or broadcast frames are offloaded */
102 if (likely(!is_multicast_skb))
103 skb->offload_fwd_mark = 1;
108 static int mtk_tag_flow_dissect(const struct sk_buff *skb, __be16 *proto,
112 *proto = ((__be16 *)skb->data)[1];
117 static const struct dsa_device_ops mtk_netdev_ops = {
119 .proto = DSA_TAG_PROTO_MTK,
120 .xmit = mtk_tag_xmit,
122 .flow_dissect = mtk_tag_flow_dissect,
123 .overhead = MTK_HDR_LEN,
126 MODULE_LICENSE("GPL");
127 MODULE_ALIAS_DSA_TAG_DRIVER(DSA_TAG_PROTO_MTK);
129 module_dsa_tag_driver(mtk_netdev_ops);