drivers/scsi/aacraid/src.c

   1 /*
   2  *      Adaptec AAC series RAID controller driver
   3  *      (c) Copyright 2001 Red Hat Inc.
   4  *
   5  * based on the old aacraid driver that is..
   6  * Adaptec aacraid device driver for Linux.
   7  *
   8  * Copyright (c) 2000-2010 Adaptec, Inc.
   9  *               2010 PMC-Sierra, Inc. ([email protected])
  10  *
  11  * This program is free software; you can redistribute it and/or modify
  12  * it under the terms of the GNU General Public License as published by
  13  * the Free Software Foundation; either version 2, or (at your option)
  14  * any later version.
  15  *
  16  * This program is distributed in the hope that it will be useful,
  17  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  18  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  19  * GNU General Public License for more details.
  20  *
  21  * You should have received a copy of the GNU General Public License
  22  * along with this program; see the file COPYING.  If not, write to
  23  * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
  24  *
  25  * Module Name:
  26  *  src.c
  27  *
  28  * Abstract: Hardware Device Interface for PMC SRC based controllers
  29  *
  30  */
  31
  32 #include <linux/kernel.h>
  33 #include <linux/init.h>
  34 #include <linux/types.h>
  35 #include <linux/pci.h>
  36 #include <linux/spinlock.h>
  37 #include <linux/slab.h>
  38 #include <linux/blkdev.h>
  39 #include <linux/delay.h>
  40 #include <linux/completion.h>
  41 #include <linux/time.h>
  42 #include <linux/interrupt.h>
  43 #include <scsi/scsi_host.h>
  44
  45 #include "aacraid.h"
  46
  47 static int aac_src_get_sync_status(struct aac_dev *dev);
  48
  49 static irqreturn_t aac_src_intr_message(int irq, void *dev_id)
  50 {
  51         struct aac_msix_ctx *ctx;
  52         struct aac_dev *dev;
  53         unsigned long bellbits, bellbits_shifted;
  54         int vector_no;
  55         int isFastResponse, mode;
  56         u32 index, handle;
  57
  58         ctx = (struct aac_msix_ctx *)dev_id;
  59         dev = ctx->dev;
  60         vector_no = ctx->vector_no;
  61
  62         if (dev->msi_enabled) {
  63                 mode = AAC_INT_MODE_MSI;
  64                 if (vector_no == 0) {
  65                         bellbits = src_readl(dev, MUnit.ODR_MSI);
  66                         if (bellbits & 0x40000)
  67                                 mode |= AAC_INT_MODE_AIF;
  68                         if (bellbits & 0x1000)
  69                                 mode |= AAC_INT_MODE_SYNC;
  70                 }
  71         } else {
  72                 mode = AAC_INT_MODE_INTX;
  73                 bellbits = src_readl(dev, MUnit.ODR_R);
  74                 if (bellbits & PmDoorBellResponseSent) {
  75                         bellbits = PmDoorBellResponseSent;
  76                         src_writel(dev, MUnit.ODR_C, bellbits);
  77                         src_readl(dev, MUnit.ODR_C);
  78                 } else {
  79                         bellbits_shifted = (bellbits >> SRC_ODR_SHIFT);
  80                         src_writel(dev, MUnit.ODR_C, bellbits);
  81                         src_readl(dev, MUnit.ODR_C);
  82
  83                         if (bellbits_shifted & DoorBellAifPending)
  84                                 mode |= AAC_INT_MODE_AIF;
  85                         else if (bellbits_shifted & OUTBOUNDDOORBELL_0)
  86                                 mode |= AAC_INT_MODE_SYNC;
  87                 }
  88         }
  89
  90         if (mode & AAC_INT_MODE_SYNC) {
  91                 unsigned long sflags;
  92                 struct list_head *entry;
  93                 int send_it = 0;
  94                 extern int aac_sync_mode;
  95
  96                 if (!aac_sync_mode && !dev->msi_enabled) {
  97                         src_writel(dev, MUnit.ODR_C, bellbits);
  98                         src_readl(dev, MUnit.ODR_C);
  99                 }
 100
 101                 if (dev->sync_fib) {
 102                         if (dev->sync_fib->callback)
 103                                 dev->sync_fib->callback(dev->sync_fib->callback_data,
 104                                         dev->sync_fib);
 105                         spin_lock_irqsave(&dev->sync_fib->event_lock, sflags);
 106                         if (dev->sync_fib->flags & FIB_CONTEXT_FLAG_WAIT) {
 107                                 dev->management_fib_count--;
 108                                 up(&dev->sync_fib->event_wait);
 109                         }
 110                         spin_unlock_irqrestore(&dev->sync_fib->event_lock,
 111                                                 sflags);
 112                         spin_lock_irqsave(&dev->sync_lock, sflags);
 113                         if (!list_empty(&dev->sync_fib_list)) {
 114                                 entry = dev->sync_fib_list.next;
 115                                 dev->sync_fib = list_entry(entry,
 116                                                            struct fib,
 117                                                            fiblink);
 118                                 list_del(entry);
 119                                 send_it = 1;
 120                         } else {
 121                                 dev->sync_fib = NULL;
 122                         }
 123                         spin_unlock_irqrestore(&dev->sync_lock, sflags);
 124                         if (send_it) {
 125                                 aac_adapter_sync_cmd(dev, SEND_SYNCHRONOUS_FIB,
 126                                         (u32)dev->sync_fib->hw_fib_pa,
 127                                         0, 0, 0, 0, 0,
 128                                         NULL, NULL, NULL, NULL, NULL);
 129                         }
 130                 }
 131                 if (!dev->msi_enabled)
 132                         mode = 0;
 133
 134         }
 135
 136         if (mode & AAC_INT_MODE_AIF) {
 137                 /* handle AIF */
 138                 aac_intr_normal(dev, 0, 2, 0, NULL);
 139                 if (dev->msi_enabled)
 140                         aac_src_access_devreg(dev, AAC_CLEAR_AIF_BIT);
 141                 mode = 0;
 142         }
 143
 144         if (mode) {
 145                 index = dev->host_rrq_idx[vector_no];
 146
 147                 for (;;) {
 148                         isFastResponse = 0;
 149                         /* remove toggle bit (31) */
 150                         handle = (dev->host_rrq[index] & 0x7fffffff);
 151                         /* check fast response bit (30) */
 152                         if (handle & 0x40000000)
 153                                 isFastResponse = 1;
 154                         handle &= 0x0000ffff;
 155                         if (handle == 0)
 156                                 break;
 157                         if (dev->msi_enabled && dev->max_msix > 1)
 158                                 atomic_dec(&dev->rrq_outstanding[vector_no]);
 159                         aac_intr_normal(dev, handle-1, 0, isFastResponse, NULL);
 160                         dev->host_rrq[index++] = 0;
 161                         if (index == (vector_no + 1) * dev->vector_cap)
 162                                 index = vector_no * dev->vector_cap;
 163                         dev->host_rrq_idx[vector_no] = index;
 164                 }
 165                 mode = 0;
 166         }
 167
 168         return IRQ_HANDLED;
 169 }
 170
 171 /**
 172  *      aac_src_disable_interrupt       -       Disable interrupts
 173  *      @dev: Adapter
 174  */
 175
 176 static void aac_src_disable_interrupt(struct aac_dev *dev)
 177 {
 178         src_writel(dev, MUnit.OIMR, dev->OIMR = 0xffffffff);
 179 }
 180
 181 /**
 182  *      aac_src_enable_interrupt_message        -       Enable interrupts
 183  *      @dev: Adapter
 184  */
 185
 186 static void aac_src_enable_interrupt_message(struct aac_dev *dev)
 187 {
 188         aac_src_access_devreg(dev, AAC_ENABLE_INTERRUPT);
 189 }
 190
 191 /**
 192  *      src_sync_cmd    -       send a command and wait
 193  *      @dev: Adapter
 194  *      @command: Command to execute
 195  *      @p1: first parameter
 196  *      @ret: adapter status
 197  *
 198  *      This routine will send a synchronous command to the adapter and wait
 199  *      for its completion.
 200  */
 201
 202 static int src_sync_cmd(struct aac_dev *dev, u32 command,
 203         u32 p1, u32 p2, u32 p3, u32 p4, u32 p5, u32 p6,
 204         u32 *status, u32 * r1, u32 * r2, u32 * r3, u32 * r4)
 205 {
 206         unsigned long start;
 207         unsigned long delay;
 208         int ok;
 209
 210         /*
 211          *      Write the command into Mailbox 0
 212          */
 213         writel(command, &dev->IndexRegs->Mailbox[0]);
 214         /*
 215          *      Write the parameters into Mailboxes 1 - 6
 216          */
 217         writel(p1, &dev->IndexRegs->Mailbox[1]);
 218         writel(p2, &dev->IndexRegs->Mailbox[2]);
 219         writel(p3, &dev->IndexRegs->Mailbox[3]);
 220         writel(p4, &dev->IndexRegs->Mailbox[4]);
 221
 222         /*
 223          *      Clear the synch command doorbell to start on a clean slate.
 224          */
 225         if (!dev->msi_enabled)
 226                 src_writel(dev,
 227                            MUnit.ODR_C,
 228                            OUTBOUNDDOORBELL_0 << SRC_ODR_SHIFT);
 229
 230         /*
 231          *      Disable doorbell interrupts
 232          */
 233         src_writel(dev, MUnit.OIMR, dev->OIMR = 0xffffffff);
 234
 235         /*
 236          *      Force the completion of the mask register write before issuing
 237          *      the interrupt.
 238          */
 239         src_readl(dev, MUnit.OIMR);
 240
 241         /*
 242          *      Signal that there is a new synch command
 243          */
 244         src_writel(dev, MUnit.IDR, INBOUNDDOORBELL_0 << SRC_IDR_SHIFT);
 245
 246         if (!dev->sync_mode || command != SEND_SYNCHRONOUS_FIB) {
 247                 ok = 0;
 248                 start = jiffies;
 249
 250                 if (command == IOP_RESET_ALWAYS) {
 251                         /* Wait up to 10 sec */
 252                         delay = 10*HZ;
 253                 } else {
 254                         /* Wait up to 5 minutes */
 255                         delay = 300*HZ;
 256                 }
 257                 while (time_before(jiffies, start+delay)) {
 258                         udelay(5);      /* Delay 5 microseconds to let Mon960 get info. */
 259                         /*
 260                          *      Mon960 will set doorbell0 bit when it has completed the command.
 261                          */
 262                         if (aac_src_get_sync_status(dev) & OUTBOUNDDOORBELL_0) {
 263                                 /*
 264                                  *      Clear the doorbell.
 265                                  */
 266                                 if (dev->msi_enabled)
 267                                         aac_src_access_devreg(dev,
 268                                                 AAC_CLEAR_SYNC_BIT);
 269                                 else
 270                                         src_writel(dev,
 271                                                 MUnit.ODR_C,
 272                                                 OUTBOUNDDOORBELL_0 << SRC_ODR_SHIFT);
 273                                 ok = 1;
 274                                 break;
 275                         }
 276                         /*
 277                          *      Yield the processor in case we are slow
 278                          */
 279                         msleep(1);
 280                 }
 281                 if (unlikely(ok != 1)) {
 282                         /*
 283                          *      Restore interrupt mask even though we timed out
 284                          */
 285                         aac_adapter_enable_int(dev);
 286                         return -ETIMEDOUT;
 287                 }
 288                 /*
 289                  *      Pull the synch status from Mailbox 0.
 290                  */
 291                 if (status)
 292                         *status = readl(&dev->IndexRegs->Mailbox[0]);
 293                 if (r1)
 294                         *r1 = readl(&dev->IndexRegs->Mailbox[1]);
 295                 if (r2)
 296                         *r2 = readl(&dev->IndexRegs->Mailbox[2]);
 297                 if (r3)
 298                         *r3 = readl(&dev->IndexRegs->Mailbox[3]);
 299                 if (r4)
 300                         *r4 = readl(&dev->IndexRegs->Mailbox[4]);
 301                 if (command == GET_COMM_PREFERRED_SETTINGS)
 302                         dev->max_msix =
 303                                 readl(&dev->IndexRegs->Mailbox[5]) & 0xFFFF;
 304                 /*
 305                  *      Clear the synch command doorbell.
 306                  */
 307                 if (!dev->msi_enabled)
 308                         src_writel(dev,
 309                                 MUnit.ODR_C,
 310                                 OUTBOUNDDOORBELL_0 << SRC_ODR_SHIFT);
 311         }
 312
 313         /*
 314          *      Restore interrupt mask
 315          */
 316         aac_adapter_enable_int(dev);
 317         return 0;
 318 }
 319
 320 /**
 321  *      aac_src_interrupt_adapter       -       interrupt adapter
 322  *      @dev: Adapter
 323  *
 324  *      Send an interrupt to the i960 and breakpoint it.
 325  */
 326
 327 static void aac_src_interrupt_adapter(struct aac_dev *dev)
 328 {
 329         src_sync_cmd(dev, BREAKPOINT_REQUEST,
 330                 0, 0, 0, 0, 0, 0,
 331                 NULL, NULL, NULL, NULL, NULL);
 332 }
 333
 334 /**
 335  *      aac_src_notify_adapter          -       send an event to the adapter
 336  *      @dev: Adapter
 337  *      @event: Event to send
 338  *
 339  *      Notify the i960 that something it probably cares about has
 340  *      happened.
 341  */
 342
 343 static void aac_src_notify_adapter(struct aac_dev *dev, u32 event)
 344 {
 345         switch (event) {
 346
 347         case AdapNormCmdQue:
 348                 src_writel(dev, MUnit.ODR_C,
 349                         INBOUNDDOORBELL_1 << SRC_ODR_SHIFT);
 350                 break;
 351         case HostNormRespNotFull:
 352                 src_writel(dev, MUnit.ODR_C,
 353                         INBOUNDDOORBELL_4 << SRC_ODR_SHIFT);
 354                 break;
 355         case AdapNormRespQue:
 356                 src_writel(dev, MUnit.ODR_C,
 357                         INBOUNDDOORBELL_2 << SRC_ODR_SHIFT);
 358                 break;
 359         case HostNormCmdNotFull:
 360                 src_writel(dev, MUnit.ODR_C,
 361                         INBOUNDDOORBELL_3 << SRC_ODR_SHIFT);
 362                 break;
 363         case FastIo:
 364                 src_writel(dev, MUnit.ODR_C,
 365                         INBOUNDDOORBELL_6 << SRC_ODR_SHIFT);
 366                 break;
 367         case AdapPrintfDone:
 368                 src_writel(dev, MUnit.ODR_C,
 369                         INBOUNDDOORBELL_5 << SRC_ODR_SHIFT);
 370                 break;
 371         default:
 372                 BUG();
 373                 break;
 374         }
 375 }
 376
 377 /**
 378  *      aac_src_start_adapter           -       activate adapter
 379  *      @dev:   Adapter
 380  *
 381  *      Start up processing on an i960 based AAC adapter
 382  */
 383
 384 static void aac_src_start_adapter(struct aac_dev *dev)
 385 {
 386         struct aac_init *init;
 387         int i;
 388
 389          /* reset host_rrq_idx first */
 390         for (i = 0; i < dev->max_msix; i++) {
 391                 dev->host_rrq_idx[i] = i * dev->vector_cap;
 392                 atomic_set(&dev->rrq_outstanding[i], 0);
 393         }
 394         dev->fibs_pushed_no = 0;
 395
 396         init = dev->init;
 397         init->HostElapsedSeconds = cpu_to_le32(get_seconds());
 398
 399         /* We can only use a 32 bit address here */
 400         src_sync_cmd(dev, INIT_STRUCT_BASE_ADDRESS, (u32)(ulong)dev->init_pa,
 401           0, 0, 0, 0, 0, NULL, NULL, NULL, NULL, NULL);
 402 }
 403
 404 /**
 405  *      aac_src_check_health
 406  *      @dev: device to check if healthy
 407  *
 408  *      Will attempt to determine if the specified adapter is alive and
 409  *      capable of handling requests, returning 0 if alive.
 410  */
 411 static int aac_src_check_health(struct aac_dev *dev)
 412 {
 413         u32 status = src_readl(dev, MUnit.OMR);
 414
 415         /*
 416          *      Check to see if the board failed any self tests.
 417          */
 418         if (unlikely(status & SELF_TEST_FAILED))
 419                 return -1;
 420
 421         /*
 422          *      Check to see if the board panic'd.
 423          */
 424         if (unlikely(status & KERNEL_PANIC))
 425                 return (status >> 16) & 0xFF;
 426         /*
 427          *      Wait for the adapter to be up and running.
 428          */
 429         if (unlikely(!(status & KERNEL_UP_AND_RUNNING)))
 430                 return -3;
 431         /*
 432          *      Everything is OK
 433          */
 434         return 0;
 435 }
 436
 437 /**
 438  *      aac_src_deliver_message
 439  *      @fib: fib to issue
 440  *
 441  *      Will send a fib, returning 0 if successful.
 442  */
 443 static int aac_src_deliver_message(struct fib *fib)
 444 {
 445         struct aac_dev *dev = fib->dev;
 446         struct aac_queue *q = &dev->queues->queue[AdapNormCmdQueue];
 447         u32 fibsize;
 448         dma_addr_t address;
 449         struct aac_fib_xporthdr *pFibX;
 450 #if !defined(writeq)
 451         unsigned long flags;
 452 #endif
 453
 454         u16 hdr_size = le16_to_cpu(fib->hw_fib_va->header.Size);
 455
 456         atomic_inc(&q->numpending);
 457
 458         if (dev->msi_enabled && fib->hw_fib_va->header.Command != AifRequest &&
 459             dev->max_msix > 1) {
 460                 u_int16_t vector_no, first_choice = 0xffff;
 461
 462                 vector_no = dev->fibs_pushed_no % dev->max_msix;
 463                 do {
 464                         vector_no += 1;
 465                         if (vector_no == dev->max_msix)
 466                                 vector_no = 1;
 467                         if (atomic_read(&dev->rrq_outstanding[vector_no]) <
 468                             dev->vector_cap)
 469                                 break;
 470                         if (0xffff == first_choice)
 471                                 first_choice = vector_no;
 472                         else if (vector_no == first_choice)
 473                                 break;
 474                 } while (1);
 475                 if (vector_no == first_choice)
 476                         vector_no = 0;
 477                 atomic_inc(&dev->rrq_outstanding[vector_no]);
 478                 if (dev->fibs_pushed_no == 0xffffffff)
 479                         dev->fibs_pushed_no = 0;
 480                 else
 481                         dev->fibs_pushed_no++;
 482                 fib->hw_fib_va->header.Handle += (vector_no << 16);
 483         }
 484
 485         if (dev->comm_interface == AAC_COMM_MESSAGE_TYPE2) {
 486                 /* Calculate the amount to the fibsize bits */
 487                 fibsize = (hdr_size + 127) / 128 - 1;
 488                 if (fibsize > (ALIGN32 - 1))
 489                         return -EMSGSIZE;
 490                 /* New FIB header, 32-bit */
 491                 address = fib->hw_fib_pa;
 492                 fib->hw_fib_va->header.StructType = FIB_MAGIC2;
 493                 fib->hw_fib_va->header.SenderFibAddress = (u32)address;
 494                 fib->hw_fib_va->header.u.TimeStamp = 0;
 495                 BUG_ON(upper_32_bits(address) != 0L);
 496                 address |= fibsize;
 497         } else {
 498                 /* Calculate the amount to the fibsize bits */
 499                 fibsize = (sizeof(struct aac_fib_xporthdr) + hdr_size + 127) / 128 - 1;
 500                 if (fibsize > (ALIGN32 - 1))
 501                         return -EMSGSIZE;
 502
 503                 /* Fill XPORT header */
 504                 pFibX = (void *)fib->hw_fib_va - sizeof(struct aac_fib_xporthdr);
 505                 pFibX->Handle = cpu_to_le32(fib->hw_fib_va->header.Handle);
 506                 pFibX->HostAddress = cpu_to_le64(fib->hw_fib_pa);
 507                 pFibX->Size = cpu_to_le32(hdr_size);
 508
 509                 /*
 510                  * The xport header has been 32-byte aligned for us so that fibsize
 511                  * can be masked out of this address by hardware. -- BenC
 512                  */
 513                 address = fib->hw_fib_pa - sizeof(struct aac_fib_xporthdr);
 514                 if (address & (ALIGN32 - 1))
 515                         return -EINVAL;
 516                 address |= fibsize;
 517         }
 518 #if defined(writeq)
 519         src_writeq(dev, MUnit.IQ_L, (u64)address);
 520 #else
 521         spin_lock_irqsave(&fib->dev->iq_lock, flags);
 522         src_writel(dev, MUnit.IQ_H, upper_32_bits(address) & 0xffffffff);
 523         src_writel(dev, MUnit.IQ_L, address & 0xffffffff);
 524         spin_unlock_irqrestore(&fib->dev->iq_lock, flags);
 525 #endif
 526         return 0;
 527 }
 528
 529 /**
 530  *      aac_src_ioremap
 531  *      @size: mapping resize request
 532  *
 533  */
 534 static int aac_src_ioremap(struct aac_dev *dev, u32 size)
 535 {
 536         if (!size) {
 537                 iounmap(dev->regs.src.bar1);
 538                 dev->regs.src.bar1 = NULL;
 539                 iounmap(dev->regs.src.bar0);
 540                 dev->base = dev->regs.src.bar0 = NULL;
 541                 return 0;
 542         }
 543         dev->regs.src.bar1 = ioremap(pci_resource_start(dev->pdev, 2),
 544                 AAC_MIN_SRC_BAR1_SIZE);
 545         dev->base = NULL;
 546         if (dev->regs.src.bar1 == NULL)
 547                 return -1;
 548         dev->base = dev->regs.src.bar0 = ioremap(dev->base_start, size);
 549         if (dev->base == NULL) {
 550                 iounmap(dev->regs.src.bar1);
 551                 dev->regs.src.bar1 = NULL;
 552                 return -1;
 553         }
 554         dev->IndexRegs = &((struct src_registers __iomem *)
 555                 dev->base)->u.tupelo.IndexRegs;
 556         return 0;
 557 }
 558
 559 /**
 560  *  aac_srcv_ioremap
 561  *      @size: mapping resize request
 562  *
 563  */
 564 static int aac_srcv_ioremap(struct aac_dev *dev, u32 size)
 565 {
 566         if (!size) {
 567                 iounmap(dev->regs.src.bar0);
 568                 dev->base = dev->regs.src.bar0 = NULL;
 569                 return 0;
 570         }
 571         dev->base = dev->regs.src.bar0 = ioremap(dev->base_start, size);
 572         if (dev->base == NULL)
 573                 return -1;
 574         dev->IndexRegs = &((struct src_registers __iomem *)
 575                 dev->base)->u.denali.IndexRegs;
 576         return 0;
 577 }
 578
 579 static int aac_src_restart_adapter(struct aac_dev *dev, int bled)
 580 {
 581         u32 var, reset_mask;
 582
 583         if (bled >= 0) {
 584                 if (bled)
 585                         printk(KERN_ERR "%s%d: adapter kernel panic'd %x.\n",
 586                                 dev->name, dev->id, bled);
 587                 dev->a_ops.adapter_enable_int = aac_src_disable_interrupt;
 588                 bled = aac_adapter_sync_cmd(dev, IOP_RESET_ALWAYS,
 589                         0, 0, 0, 0, 0, 0, &var, &reset_mask, NULL, NULL, NULL);
 590                 if ((bled || (var != 0x00000001)) &&
 591                     !dev->doorbell_mask)
 592                         return -EINVAL;
 593                 else if (dev->doorbell_mask) {
 594                         reset_mask = dev->doorbell_mask;
 595                         bled = 0;
 596                         var = 0x00000001;
 597                 }
 598
 599                 if ((dev->pdev->device == PMC_DEVICE_S7 ||
 600                     dev->pdev->device == PMC_DEVICE_S8 ||
 601                     dev->pdev->device == PMC_DEVICE_S9) && dev->msi_enabled) {
 602                         aac_src_access_devreg(dev, AAC_ENABLE_INTX);
 603                         dev->msi_enabled = 0;
 604                         msleep(5000); /* Delay 5 seconds */
 605                 }
 606
 607                 if (!bled && (dev->supplement_adapter_info.SupportedOptions2 &
 608                     AAC_OPTION_DOORBELL_RESET)) {
 609                         src_writel(dev, MUnit.IDR, reset_mask);
 610                         ssleep(45);
 611                 } else {
 612                         src_writel(dev, MUnit.IDR, 0x100);
 613                         ssleep(45);
 614                 }
 615         }
 616
 617         if (src_readl(dev, MUnit.OMR) & KERNEL_PANIC)
 618                 return -ENODEV;
 619
 620         if (startup_timeout < 300)
 621                 startup_timeout = 300;
 622
 623         return 0;
 624 }
 625
 626 /**
 627  *      aac_src_select_comm     -       Select communications method
 628  *      @dev: Adapter
 629  *      @comm: communications method
 630  */
 631 int aac_src_select_comm(struct aac_dev *dev, int comm)
 632 {
 633         switch (comm) {
 634         case AAC_COMM_MESSAGE:
 635                 dev->a_ops.adapter_intr = aac_src_intr_message;
 636                 dev->a_ops.adapter_deliver = aac_src_deliver_message;
 637                 break;
 638         default:
 639                 return 1;
 640         }
 641         return 0;
 642 }
 643
 644 /**
 645  *  aac_src_init        -       initialize an Cardinal Frey Bar card
 646  *  @dev: device to configure
 647  *
 648  */
 649
 650 int aac_src_init(struct aac_dev *dev)
 651 {
 652         unsigned long start;
 653         unsigned long status;
 654         int restart = 0;
 655         int instance = dev->id;
 656         const char *name = dev->name;
 657
 658         dev->a_ops.adapter_ioremap = aac_src_ioremap;
 659         dev->a_ops.adapter_comm = aac_src_select_comm;
 660
 661         dev->base_size = AAC_MIN_SRC_BAR0_SIZE;
 662         if (aac_adapter_ioremap(dev, dev->base_size)) {
 663                 printk(KERN_WARNING "%s: unable to map adapter.\n", name);
 664                 goto error_iounmap;
 665         }
 666
 667         /* Failure to reset here is an option ... */
 668         dev->a_ops.adapter_sync_cmd = src_sync_cmd;
 669         dev->a_ops.adapter_enable_int = aac_src_disable_interrupt;
 670         if ((aac_reset_devices || reset_devices) &&
 671                 !aac_src_restart_adapter(dev, 0))
 672                 ++restart;
 673         /*
 674          *      Check to see if the board panic'd while booting.
 675          */
 676         status = src_readl(dev, MUnit.OMR);
 677         if (status & KERNEL_PANIC) {
 678                 if (aac_src_restart_adapter(dev, aac_src_check_health(dev)))
 679                         goto error_iounmap;
 680                 ++restart;
 681         }
 682         /*
 683          *      Check to see if the board failed any self tests.
 684          */
 685         status = src_readl(dev, MUnit.OMR);
 686         if (status & SELF_TEST_FAILED) {
 687                 printk(KERN_ERR "%s%d: adapter self-test failed.\n",
 688                         dev->name, instance);
 689                 goto error_iounmap;
 690         }
 691         /*
 692          *      Check to see if the monitor panic'd while booting.
 693          */
 694         if (status & MONITOR_PANIC) {
 695                 printk(KERN_ERR "%s%d: adapter monitor panic.\n",
 696                         dev->name, instance);
 697                 goto error_iounmap;
 698         }
 699         start = jiffies;
 700         /*
 701          *      Wait for the adapter to be up and running. Wait up to 3 minutes
 702          */
 703         while (!((status = src_readl(dev, MUnit.OMR)) &
 704                 KERNEL_UP_AND_RUNNING)) {
 705                 if ((restart &&
 706                   (status & (KERNEL_PANIC|SELF_TEST_FAILED|MONITOR_PANIC))) ||
 707                   time_after(jiffies, start+HZ*startup_timeout)) {
 708                         printk(KERN_ERR "%s%d: adapter kernel failed to start, init status = %lx.\n",
 709                                         dev->name, instance, status);
 710                         goto error_iounmap;
 711                 }
 712                 if (!restart &&
 713                   ((status & (KERNEL_PANIC|SELF_TEST_FAILED|MONITOR_PANIC)) ||
 714                   time_after(jiffies, start + HZ *
 715                   ((startup_timeout > 60)
 716                     ? (startup_timeout - 60)
 717                     : (startup_timeout / 2))))) {
 718                         if (likely(!aac_src_restart_adapter(dev,
 719                             aac_src_check_health(dev))))
 720                                 start = jiffies;
 721                         ++restart;
 722                 }
 723                 msleep(1);
 724         }
 725         if (restart && aac_commit)
 726                 aac_commit = 1;
 727         /*
 728          *      Fill in the common function dispatch table.
 729          */
 730         dev->a_ops.adapter_interrupt = aac_src_interrupt_adapter;
 731         dev->a_ops.adapter_disable_int = aac_src_disable_interrupt;
 732         dev->a_ops.adapter_enable_int = aac_src_disable_interrupt;
 733         dev->a_ops.adapter_notify = aac_src_notify_adapter;
 734         dev->a_ops.adapter_sync_cmd = src_sync_cmd;
 735         dev->a_ops.adapter_check_health = aac_src_check_health;
 736         dev->a_ops.adapter_restart = aac_src_restart_adapter;
 737         dev->a_ops.adapter_start = aac_src_start_adapter;
 738
 739         /*
 740          *      First clear out all interrupts.  Then enable the one's that we
 741          *      can handle.
 742          */
 743         aac_adapter_comm(dev, AAC_COMM_MESSAGE);
 744         aac_adapter_disable_int(dev);
 745         src_writel(dev, MUnit.ODR_C, 0xffffffff);
 746         aac_adapter_enable_int(dev);
 747
 748         if (aac_init_adapter(dev) == NULL)
 749                 goto error_iounmap;
 750         if (dev->comm_interface != AAC_COMM_MESSAGE_TYPE1)
 751                 goto error_iounmap;
 752
 753         dev->msi = !pci_enable_msi(dev->pdev);
 754
 755         dev->aac_msix[0].vector_no = 0;
 756         dev->aac_msix[0].dev = dev;
 757
 758         if (request_irq(dev->pdev->irq, dev->a_ops.adapter_intr,
 759                         IRQF_SHARED, "aacraid", &(dev->aac_msix[0]))  < 0) {
 760
 761                 if (dev->msi)
 762                         pci_disable_msi(dev->pdev);
 763
 764                 printk(KERN_ERR "%s%d: Interrupt unavailable.\n",
 765                         name, instance);
 766                 goto error_iounmap;
 767         }
 768         dev->dbg_base = pci_resource_start(dev->pdev, 2);
 769         dev->dbg_base_mapped = dev->regs.src.bar1;
 770         dev->dbg_size = AAC_MIN_SRC_BAR1_SIZE;
 771         dev->a_ops.adapter_enable_int = aac_src_enable_interrupt_message;
 772
 773         aac_adapter_enable_int(dev);
 774
 775         if (!dev->sync_mode) {
 776                 /*
 777                  * Tell the adapter that all is configured, and it can
 778                  * start accepting requests
 779                  */
 780                 aac_src_start_adapter(dev);
 781         }
 782         return 0;
 783
 784 error_iounmap:
 785
 786         return -1;
 787 }
 788
 789 /**
 790  *  aac_srcv_init       -       initialize an SRCv card
 791  *  @dev: device to configure
 792  *
 793  */
 794
 795 int aac_srcv_init(struct aac_dev *dev)
 796 {
 797         unsigned long start;
 798         unsigned long status;
 799         int restart = 0;
 800         int instance = dev->id;
 801         const char *name = dev->name;
 802
 803         dev->a_ops.adapter_ioremap = aac_srcv_ioremap;
 804         dev->a_ops.adapter_comm = aac_src_select_comm;
 805
 806         dev->base_size = AAC_MIN_SRCV_BAR0_SIZE;
 807         if (aac_adapter_ioremap(dev, dev->base_size)) {
 808                 printk(KERN_WARNING "%s: unable to map adapter.\n", name);
 809                 goto error_iounmap;
 810         }
 811
 812         /* Failure to reset here is an option ... */
 813         dev->a_ops.adapter_sync_cmd = src_sync_cmd;
 814         dev->a_ops.adapter_enable_int = aac_src_disable_interrupt;
 815         if ((aac_reset_devices || reset_devices) &&
 816                 !aac_src_restart_adapter(dev, 0))
 817                 ++restart;
 818         /*
 819          *      Check to see if flash update is running.
 820          *      Wait for the adapter to be up and running. Wait up to 5 minutes
 821          */
 822         status = src_readl(dev, MUnit.OMR);
 823         if (status & FLASH_UPD_PENDING) {
 824                 start = jiffies;
 825                 do {
 826                         status = src_readl(dev, MUnit.OMR);
 827                         if (time_after(jiffies, start+HZ*FWUPD_TIMEOUT)) {
 828                                 printk(KERN_ERR "%s%d: adapter flash update failed.\n",
 829                                         dev->name, instance);
 830                                 goto error_iounmap;
 831                         }
 832                 } while (!(status & FLASH_UPD_SUCCESS) &&
 833                          !(status & FLASH_UPD_FAILED));
 834                 /* Delay 10 seconds.
 835                  * Because right now FW is doing a soft reset,
 836                  * do not read scratch pad register at this time
 837                  */
 838                 ssleep(10);
 839         }
 840         /*
 841          *      Check to see if the board panic'd while booting.
 842          */
 843         status = src_readl(dev, MUnit.OMR);
 844         if (status & KERNEL_PANIC) {
 845                 if (aac_src_restart_adapter(dev, aac_src_check_health(dev)))
 846                         goto error_iounmap;
 847                 ++restart;
 848         }
 849         /*
 850          *      Check to see if the board failed any self tests.
 851          */
 852         status = src_readl(dev, MUnit.OMR);
 853         if (status & SELF_TEST_FAILED) {
 854                 printk(KERN_ERR "%s%d: adapter self-test failed.\n", dev->name, instance);
 855                 goto error_iounmap;
 856         }
 857         /*
 858          *      Check to see if the monitor panic'd while booting.
 859          */
 860         if (status & MONITOR_PANIC) {
 861                 printk(KERN_ERR "%s%d: adapter monitor panic.\n", dev->name, instance);
 862                 goto error_iounmap;
 863         }
 864         start = jiffies;
 865         /*
 866          *      Wait for the adapter to be up and running. Wait up to 3 minutes
 867          */
 868         while (!((status = src_readl(dev, MUnit.OMR)) &
 869                 KERNEL_UP_AND_RUNNING) ||
 870                 status == 0xffffffff) {
 871                 if ((restart &&
 872                   (status & (KERNEL_PANIC|SELF_TEST_FAILED|MONITOR_PANIC))) ||
 873                   time_after(jiffies, start+HZ*startup_timeout)) {
 874                         printk(KERN_ERR "%s%d: adapter kernel failed to start, init status = %lx.\n",
 875                                         dev->name, instance, status);
 876                         goto error_iounmap;
 877                 }
 878                 if (!restart &&
 879                   ((status & (KERNEL_PANIC|SELF_TEST_FAILED|MONITOR_PANIC)) ||
 880                   time_after(jiffies, start + HZ *
 881                   ((startup_timeout > 60)
 882                     ? (startup_timeout - 60)
 883                     : (startup_timeout / 2))))) {
 884                         if (likely(!aac_src_restart_adapter(dev, aac_src_check_health(dev))))
 885                                 start = jiffies;
 886                         ++restart;
 887                 }
 888                 msleep(1);
 889         }
 890         if (restart && aac_commit)
 891                 aac_commit = 1;
 892         /*
 893          *      Fill in the common function dispatch table.
 894          */
 895         dev->a_ops.adapter_interrupt = aac_src_interrupt_adapter;
 896         dev->a_ops.adapter_disable_int = aac_src_disable_interrupt;
 897         dev->a_ops.adapter_enable_int = aac_src_disable_interrupt;
 898         dev->a_ops.adapter_notify = aac_src_notify_adapter;
 899         dev->a_ops.adapter_sync_cmd = src_sync_cmd;
 900         dev->a_ops.adapter_check_health = aac_src_check_health;
 901         dev->a_ops.adapter_restart = aac_src_restart_adapter;
 902         dev->a_ops.adapter_start = aac_src_start_adapter;
 903
 904         /*
 905          *      First clear out all interrupts.  Then enable the one's that we
 906          *      can handle.
 907          */
 908         aac_adapter_comm(dev, AAC_COMM_MESSAGE);
 909         aac_adapter_disable_int(dev);
 910         src_writel(dev, MUnit.ODR_C, 0xffffffff);
 911         aac_adapter_enable_int(dev);
 912
 913         if (aac_init_adapter(dev) == NULL)
 914                 goto error_iounmap;
 915         if (dev->comm_interface != AAC_COMM_MESSAGE_TYPE2)
 916                 goto error_iounmap;
 917         if (dev->msi_enabled)
 918                 aac_src_access_devreg(dev, AAC_ENABLE_MSIX);
 919
 920         if (aac_acquire_irq(dev))
 921                 goto error_iounmap;
 922
 923         dev->dbg_base = dev->base_start;
 924         dev->dbg_base_mapped = dev->base;
 925         dev->dbg_size = dev->base_size;
 926         dev->a_ops.adapter_enable_int = aac_src_enable_interrupt_message;
 927
 928         aac_adapter_enable_int(dev);
 929
 930         if (!dev->sync_mode) {
 931                 /*
 932                  * Tell the adapter that all is configured, and it can
 933                  * start accepting requests
 934                  */
 935                 aac_src_start_adapter(dev);
 936         }
 937         return 0;
 938
 939 error_iounmap:
 940
 941         return -1;
 942 }
 943
 944 void aac_src_access_devreg(struct aac_dev *dev, int mode)
 945 {
 946         u_int32_t val;
 947
 948         switch (mode) {
 949         case AAC_ENABLE_INTERRUPT:
 950                 src_writel(dev,
 951                            MUnit.OIMR,
 952                            dev->OIMR = (dev->msi_enabled ?
 953                                         AAC_INT_ENABLE_TYPE1_MSIX :
 954                                         AAC_INT_ENABLE_TYPE1_INTX));
 955                 break;
 956
 957         case AAC_DISABLE_INTERRUPT:
 958                 src_writel(dev,
 959                            MUnit.OIMR,
 960                            dev->OIMR = AAC_INT_DISABLE_ALL);
 961                 break;
 962
 963         case AAC_ENABLE_MSIX:
 964                 /* set bit 6 */
 965                 val = src_readl(dev, MUnit.IDR);
 966                 val |= 0x40;
 967                 src_writel(dev,  MUnit.IDR, val);
 968                 src_readl(dev, MUnit.IDR);
 969                 /* unmask int. */
 970                 val = PMC_ALL_INTERRUPT_BITS;
 971                 src_writel(dev, MUnit.IOAR, val);
 972                 val = src_readl(dev, MUnit.OIMR);
 973                 src_writel(dev,
 974                            MUnit.OIMR,
 975                            val & (~(PMC_GLOBAL_INT_BIT2 | PMC_GLOBAL_INT_BIT0)));
 976                 break;
 977
 978         case AAC_DISABLE_MSIX:
 979                 /* reset bit 6 */
 980                 val = src_readl(dev, MUnit.IDR);
 981                 val &= ~0x40;
 982                 src_writel(dev, MUnit.IDR, val);
 983                 src_readl(dev, MUnit.IDR);
 984                 break;
 985
 986         case AAC_CLEAR_AIF_BIT:
 987                 /* set bit 5 */
 988                 val = src_readl(dev, MUnit.IDR);
 989                 val |= 0x20;
 990                 src_writel(dev, MUnit.IDR, val);
 991                 src_readl(dev, MUnit.IDR);
 992                 break;
 993
 994         case AAC_CLEAR_SYNC_BIT:
 995                 /* set bit 4 */
 996                 val = src_readl(dev, MUnit.IDR);
 997                 val |= 0x10;
 998                 src_writel(dev, MUnit.IDR, val);
 999                 src_readl(dev, MUnit.IDR);
1000                 break;
1001
1002         case AAC_ENABLE_INTX:
1003                 /* set bit 7 */
1004                 val = src_readl(dev, MUnit.IDR);
1005                 val |= 0x80;
1006                 src_writel(dev, MUnit.IDR, val);
1007                 src_readl(dev, MUnit.IDR);
1008                 /* unmask int. */
1009                 val = PMC_ALL_INTERRUPT_BITS;
1010                 src_writel(dev, MUnit.IOAR, val);
1011                 src_readl(dev, MUnit.IOAR);
1012                 val = src_readl(dev, MUnit.OIMR);
1013                 src_writel(dev, MUnit.OIMR,
1014                                 val & (~(PMC_GLOBAL_INT_BIT2)));
1015                 break;
1016
1017         default:
1018                 break;
1019         }
1020 }
1021
1022 static int aac_src_get_sync_status(struct aac_dev *dev)
1023 {
1024
1025         int val;
1026
1027         if (dev->msi_enabled)
1028                 val = src_readl(dev, MUnit.ODR_MSI) & 0x1000 ? 1 : 0;
1029         else
1030                 val = src_readl(dev, MUnit.ODR_R) >> SRC_ODR_SHIFT;
1031
1032         return val;
1033 }