2 * sd.c Copyright (C) 1992 Drew Eckhardt
3 * Copyright (C) 1993, 1994, 1995, 1999 Eric Youngdale
5 * Linux scsi disk driver
6 * Initial versions: Drew Eckhardt
7 * Subsequent revisions: Eric Youngdale
8 * Modification history:
11 * outstanding request, and other enhancements.
12 * Support loadable low-level scsi drivers.
14 * eight major numbers.
17 * sd_init and cleanups.
19 * not being read in sd_open. Fix problem where removable media
20 * could be ejected after sd_open.
24 * Support 32k/1M disks.
26 * Logging policy (needs CONFIG_SCSI_LOGGING defined):
27 * - setting up transfer: SCSI_LOG_HLQUEUE levels 1 and 2
28 * - end of transfer (bh + scsi_lib): SCSI_LOG_HLCOMPLETE level 1
29 * - entering sd_ioctl: SCSI_LOG_IOCTL level 1
30 * - entering other commands: SCSI_LOG_HLQUEUE level 3
31 * Note: when the logging level is set by the user, it must be greater
32 * than the level indicated above to trigger output.
35 #include <linux/module.h>
37 #include <linux/kernel.h>
39 #include <linux/bio.h>
40 #include <linux/genhd.h>
41 #include <linux/hdreg.h>
42 #include <linux/errno.h>
43 #include <linux/idr.h>
44 #include <linux/interrupt.h>
45 #include <linux/init.h>
46 #include <linux/blkdev.h>
47 #include <linux/blkpg.h>
48 #include <linux/delay.h>
49 #include <linux/mutex.h>
50 #include <linux/string_helpers.h>
51 #include <linux/async.h>
52 #include <linux/slab.h>
53 #include <linux/pm_runtime.h>
54 #include <asm/uaccess.h>
55 #include <asm/unaligned.h>
57 #include <scsi/scsi.h>
58 #include <scsi/scsi_cmnd.h>
59 #include <scsi/scsi_dbg.h>
60 #include <scsi/scsi_device.h>
61 #include <scsi/scsi_driver.h>
62 #include <scsi/scsi_eh.h>
63 #include <scsi/scsi_host.h>
64 #include <scsi/scsi_ioctl.h>
65 #include <scsi/scsicam.h>
68 #include "scsi_priv.h"
69 #include "scsi_logging.h"
71 MODULE_AUTHOR("Eric Youngdale");
72 MODULE_DESCRIPTION("SCSI disk (sd) driver");
73 MODULE_LICENSE("GPL");
75 MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK0_MAJOR);
76 MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK1_MAJOR);
77 MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK2_MAJOR);
78 MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK3_MAJOR);
79 MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK4_MAJOR);
80 MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK5_MAJOR);
81 MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK6_MAJOR);
82 MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK7_MAJOR);
83 MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK8_MAJOR);
84 MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK9_MAJOR);
85 MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK10_MAJOR);
86 MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK11_MAJOR);
87 MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK12_MAJOR);
88 MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK13_MAJOR);
89 MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK14_MAJOR);
90 MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK15_MAJOR);
91 MODULE_ALIAS_SCSI_DEVICE(TYPE_DISK);
92 MODULE_ALIAS_SCSI_DEVICE(TYPE_MOD);
93 MODULE_ALIAS_SCSI_DEVICE(TYPE_RBC);
95 #if !defined(CONFIG_DEBUG_BLOCK_EXT_DEVT)
101 static void sd_config_discard(struct scsi_disk *, unsigned int);
102 static void sd_config_write_same(struct scsi_disk *);
103 static int sd_revalidate_disk(struct gendisk *);
104 static void sd_unlock_native_capacity(struct gendisk *disk);
105 static int sd_probe(struct device *);
106 static int sd_remove(struct device *);
107 static void sd_shutdown(struct device *);
108 static int sd_suspend_system(struct device *);
109 static int sd_suspend_runtime(struct device *);
110 static int sd_resume(struct device *);
111 static void sd_rescan(struct device *);
112 static int sd_init_command(struct scsi_cmnd *SCpnt);
113 static void sd_uninit_command(struct scsi_cmnd *SCpnt);
114 static int sd_done(struct scsi_cmnd *);
115 static int sd_eh_action(struct scsi_cmnd *, int);
116 static void sd_read_capacity(struct scsi_disk *sdkp, unsigned char *buffer);
117 static void scsi_disk_release(struct device *cdev);
118 static void sd_print_sense_hdr(struct scsi_disk *, struct scsi_sense_hdr *);
119 static void sd_print_result(struct scsi_disk *, int);
121 static DEFINE_SPINLOCK(sd_index_lock);
122 static DEFINE_IDA(sd_index_ida);
124 /* This semaphore is used to mediate the 0->1 reference get in the
125 * face of object destruction (i.e. we can't allow a get on an
126 * object after last put) */
127 static DEFINE_MUTEX(sd_ref_mutex);
129 static struct kmem_cache *sd_cdb_cache;
130 static mempool_t *sd_cdb_pool;
132 static const char *sd_cache_types[] = {
133 "write through", "none", "write back",
134 "write back, no read (daft)"
138 cache_type_store(struct device *dev, struct device_attribute *attr,
139 const char *buf, size_t count)
141 int i, ct = -1, rcd, wce, sp;
142 struct scsi_disk *sdkp = to_scsi_disk(dev);
143 struct scsi_device *sdp = sdkp->device;
146 struct scsi_mode_data data;
147 struct scsi_sense_hdr sshdr;
148 static const char temp[] = "temporary ";
151 if (sdp->type != TYPE_DISK)
152 /* no cache control on RBC devices; theoretically they
153 * can do it, but there's probably so many exceptions
154 * it's not worth the risk */
157 if (strncmp(buf, temp, sizeof(temp) - 1) == 0) {
158 buf += sizeof(temp) - 1;
159 sdkp->cache_override = 1;
161 sdkp->cache_override = 0;
164 for (i = 0; i < ARRAY_SIZE(sd_cache_types); i++) {
165 len = strlen(sd_cache_types[i]);
166 if (strncmp(sd_cache_types[i], buf, len) == 0 &&
174 rcd = ct & 0x01 ? 1 : 0;
175 wce = ct & 0x02 ? 1 : 0;
177 if (sdkp->cache_override) {
183 if (scsi_mode_sense(sdp, 0x08, 8, buffer, sizeof(buffer), SD_TIMEOUT,
184 SD_MAX_RETRIES, &data, NULL))
186 len = min_t(size_t, sizeof(buffer), data.length - data.header_length -
187 data.block_descriptor_length);
188 buffer_data = buffer + data.header_length +
189 data.block_descriptor_length;
190 buffer_data[2] &= ~0x05;
191 buffer_data[2] |= wce << 2 | rcd;
192 sp = buffer_data[0] & 0x80 ? 1 : 0;
194 if (scsi_mode_select(sdp, 1, sp, 8, buffer_data, len, SD_TIMEOUT,
195 SD_MAX_RETRIES, &data, &sshdr)) {
196 if (scsi_sense_valid(&sshdr))
197 sd_print_sense_hdr(sdkp, &sshdr);
200 revalidate_disk(sdkp->disk);
205 manage_start_stop_show(struct device *dev, struct device_attribute *attr,
208 struct scsi_disk *sdkp = to_scsi_disk(dev);
209 struct scsi_device *sdp = sdkp->device;
211 return snprintf(buf, 20, "%u\n", sdp->manage_start_stop);
215 manage_start_stop_store(struct device *dev, struct device_attribute *attr,
216 const char *buf, size_t count)
218 struct scsi_disk *sdkp = to_scsi_disk(dev);
219 struct scsi_device *sdp = sdkp->device;
221 if (!capable(CAP_SYS_ADMIN))
224 sdp->manage_start_stop = simple_strtoul(buf, NULL, 10);
228 static DEVICE_ATTR_RW(manage_start_stop);
231 allow_restart_show(struct device *dev, struct device_attribute *attr, char *buf)
233 struct scsi_disk *sdkp = to_scsi_disk(dev);
235 return snprintf(buf, 40, "%d\n", sdkp->device->allow_restart);
239 allow_restart_store(struct device *dev, struct device_attribute *attr,
240 const char *buf, size_t count)
242 struct scsi_disk *sdkp = to_scsi_disk(dev);
243 struct scsi_device *sdp = sdkp->device;
245 if (!capable(CAP_SYS_ADMIN))
248 if (sdp->type != TYPE_DISK)
251 sdp->allow_restart = simple_strtoul(buf, NULL, 10);
255 static DEVICE_ATTR_RW(allow_restart);
258 cache_type_show(struct device *dev, struct device_attribute *attr, char *buf)
260 struct scsi_disk *sdkp = to_scsi_disk(dev);
261 int ct = sdkp->RCD + 2*sdkp->WCE;
263 return snprintf(buf, 40, "%s\n", sd_cache_types[ct]);
265 static DEVICE_ATTR_RW(cache_type);
268 FUA_show(struct device *dev, struct device_attribute *attr, char *buf)
270 struct scsi_disk *sdkp = to_scsi_disk(dev);
272 return snprintf(buf, 20, "%u\n", sdkp->DPOFUA);
274 static DEVICE_ATTR_RO(FUA);
277 protection_type_show(struct device *dev, struct device_attribute *attr,
280 struct scsi_disk *sdkp = to_scsi_disk(dev);
282 return snprintf(buf, 20, "%u\n", sdkp->protection_type);
286 protection_type_store(struct device *dev, struct device_attribute *attr,
287 const char *buf, size_t count)
289 struct scsi_disk *sdkp = to_scsi_disk(dev);
293 if (!capable(CAP_SYS_ADMIN))
296 err = kstrtouint(buf, 10, &val);
301 if (val >= 0 && val <= SD_DIF_TYPE3_PROTECTION)
302 sdkp->protection_type = val;
306 static DEVICE_ATTR_RW(protection_type);
309 protection_mode_show(struct device *dev, struct device_attribute *attr,
312 struct scsi_disk *sdkp = to_scsi_disk(dev);
313 struct scsi_device *sdp = sdkp->device;
314 unsigned int dif, dix;
316 dif = scsi_host_dif_capable(sdp->host, sdkp->protection_type);
317 dix = scsi_host_dix_capable(sdp->host, sdkp->protection_type);
319 if (!dix && scsi_host_dix_capable(sdp->host, SD_DIF_TYPE0_PROTECTION)) {
325 return snprintf(buf, 20, "none\n");
327 return snprintf(buf, 20, "%s%u\n", dix ? "dix" : "dif", dif);
329 static DEVICE_ATTR_RO(protection_mode);
332 app_tag_own_show(struct device *dev, struct device_attribute *attr, char *buf)
334 struct scsi_disk *sdkp = to_scsi_disk(dev);
336 return snprintf(buf, 20, "%u\n", sdkp->ATO);
338 static DEVICE_ATTR_RO(app_tag_own);
341 thin_provisioning_show(struct device *dev, struct device_attribute *attr,
344 struct scsi_disk *sdkp = to_scsi_disk(dev);
346 return snprintf(buf, 20, "%u\n", sdkp->lbpme);
348 static DEVICE_ATTR_RO(thin_provisioning);
350 static const char *lbp_mode[] = {
351 [SD_LBP_FULL] = "full",
352 [SD_LBP_UNMAP] = "unmap",
353 [SD_LBP_WS16] = "writesame_16",
354 [SD_LBP_WS10] = "writesame_10",
355 [SD_LBP_ZERO] = "writesame_zero",
356 [SD_LBP_DISABLE] = "disabled",
360 provisioning_mode_show(struct device *dev, struct device_attribute *attr,
363 struct scsi_disk *sdkp = to_scsi_disk(dev);
365 return snprintf(buf, 20, "%s\n", lbp_mode[sdkp->provisioning_mode]);
369 provisioning_mode_store(struct device *dev, struct device_attribute *attr,
370 const char *buf, size_t count)
372 struct scsi_disk *sdkp = to_scsi_disk(dev);
373 struct scsi_device *sdp = sdkp->device;
375 if (!capable(CAP_SYS_ADMIN))
378 if (sdp->type != TYPE_DISK)
381 if (!strncmp(buf, lbp_mode[SD_LBP_UNMAP], 20))
382 sd_config_discard(sdkp, SD_LBP_UNMAP);
383 else if (!strncmp(buf, lbp_mode[SD_LBP_WS16], 20))
384 sd_config_discard(sdkp, SD_LBP_WS16);
385 else if (!strncmp(buf, lbp_mode[SD_LBP_WS10], 20))
386 sd_config_discard(sdkp, SD_LBP_WS10);
387 else if (!strncmp(buf, lbp_mode[SD_LBP_ZERO], 20))
388 sd_config_discard(sdkp, SD_LBP_ZERO);
389 else if (!strncmp(buf, lbp_mode[SD_LBP_DISABLE], 20))
390 sd_config_discard(sdkp, SD_LBP_DISABLE);
396 static DEVICE_ATTR_RW(provisioning_mode);
399 max_medium_access_timeouts_show(struct device *dev,
400 struct device_attribute *attr, char *buf)
402 struct scsi_disk *sdkp = to_scsi_disk(dev);
404 return snprintf(buf, 20, "%u\n", sdkp->max_medium_access_timeouts);
408 max_medium_access_timeouts_store(struct device *dev,
409 struct device_attribute *attr, const char *buf,
412 struct scsi_disk *sdkp = to_scsi_disk(dev);
415 if (!capable(CAP_SYS_ADMIN))
418 err = kstrtouint(buf, 10, &sdkp->max_medium_access_timeouts);
420 return err ? err : count;
422 static DEVICE_ATTR_RW(max_medium_access_timeouts);
425 max_write_same_blocks_show(struct device *dev, struct device_attribute *attr,
428 struct scsi_disk *sdkp = to_scsi_disk(dev);
430 return snprintf(buf, 20, "%u\n", sdkp->max_ws_blocks);
434 max_write_same_blocks_store(struct device *dev, struct device_attribute *attr,
435 const char *buf, size_t count)
437 struct scsi_disk *sdkp = to_scsi_disk(dev);
438 struct scsi_device *sdp = sdkp->device;
442 if (!capable(CAP_SYS_ADMIN))
445 if (sdp->type != TYPE_DISK)
448 err = kstrtoul(buf, 10, &max);
454 sdp->no_write_same = 1;
455 else if (max <= SD_MAX_WS16_BLOCKS) {
456 sdp->no_write_same = 0;
457 sdkp->max_ws_blocks = max;
460 sd_config_write_same(sdkp);
464 static DEVICE_ATTR_RW(max_write_same_blocks);
466 static struct attribute *sd_disk_attrs[] = {
467 &dev_attr_cache_type.attr,
469 &dev_attr_allow_restart.attr,
470 &dev_attr_manage_start_stop.attr,
471 &dev_attr_protection_type.attr,
472 &dev_attr_protection_mode.attr,
473 &dev_attr_app_tag_own.attr,
474 &dev_attr_thin_provisioning.attr,
475 &dev_attr_provisioning_mode.attr,
476 &dev_attr_max_write_same_blocks.attr,
477 &dev_attr_max_medium_access_timeouts.attr,
480 ATTRIBUTE_GROUPS(sd_disk);
482 static struct class sd_disk_class = {
484 .owner = THIS_MODULE,
485 .dev_release = scsi_disk_release,
486 .dev_groups = sd_disk_groups,
489 static const struct dev_pm_ops sd_pm_ops = {
490 .suspend = sd_suspend_system,
492 .poweroff = sd_suspend_system,
493 .restore = sd_resume,
494 .runtime_suspend = sd_suspend_runtime,
495 .runtime_resume = sd_resume,
498 static struct scsi_driver sd_template = {
499 .owner = THIS_MODULE,
504 .shutdown = sd_shutdown,
508 .init_command = sd_init_command,
509 .uninit_command = sd_uninit_command,
511 .eh_action = sd_eh_action,
515 * Dummy kobj_map->probe function.
516 * The default ->probe function will call modprobe, which is
517 * pointless as this module is already loaded.
519 static struct kobject *sd_default_probe(dev_t devt, int *partno, void *data)
525 * Device no to disk mapping:
527 * major disc2 disc p1
528 * |............|.............|....|....| <- dev_t
531 * Inside a major, we have 16k disks, however mapped non-
532 * contiguously. The first 16 disks are for major0, the next
533 * ones with major1, ... Disk 256 is for major0 again, disk 272
535 * As we stay compatible with our numbering scheme, we can reuse
536 * the well-know SCSI majors 8, 65--71, 136--143.
538 static int sd_major(int major_idx)
542 return SCSI_DISK0_MAJOR;
544 return SCSI_DISK1_MAJOR + major_idx - 1;
546 return SCSI_DISK8_MAJOR + major_idx - 8;
549 return 0; /* shut up gcc */
553 static struct scsi_disk *__scsi_disk_get(struct gendisk *disk)
555 struct scsi_disk *sdkp = NULL;
557 if (disk->private_data) {
558 sdkp = scsi_disk(disk);
559 if (scsi_device_get(sdkp->device) == 0)
560 get_device(&sdkp->dev);
567 static struct scsi_disk *scsi_disk_get(struct gendisk *disk)
569 struct scsi_disk *sdkp;
571 mutex_lock(&sd_ref_mutex);
572 sdkp = __scsi_disk_get(disk);
573 mutex_unlock(&sd_ref_mutex);
577 static struct scsi_disk *scsi_disk_get_from_dev(struct device *dev)
579 struct scsi_disk *sdkp;
581 mutex_lock(&sd_ref_mutex);
582 sdkp = dev_get_drvdata(dev);
584 sdkp = __scsi_disk_get(sdkp->disk);
585 mutex_unlock(&sd_ref_mutex);
589 static void scsi_disk_put(struct scsi_disk *sdkp)
591 struct scsi_device *sdev = sdkp->device;
593 mutex_lock(&sd_ref_mutex);
594 put_device(&sdkp->dev);
595 scsi_device_put(sdev);
596 mutex_unlock(&sd_ref_mutex);
599 static void sd_prot_op(struct scsi_cmnd *scmd, unsigned int dif)
601 unsigned int prot_op = SCSI_PROT_NORMAL;
602 unsigned int dix = scsi_prot_sg_count(scmd);
604 if (scmd->sc_data_direction == DMA_FROM_DEVICE) {
606 prot_op = SCSI_PROT_READ_PASS;
607 else if (dif && !dix)
608 prot_op = SCSI_PROT_READ_STRIP;
609 else if (!dif && dix)
610 prot_op = SCSI_PROT_READ_INSERT;
613 prot_op = SCSI_PROT_WRITE_PASS;
614 else if (dif && !dix)
615 prot_op = SCSI_PROT_WRITE_INSERT;
616 else if (!dif && dix)
617 prot_op = SCSI_PROT_WRITE_STRIP;
620 scsi_set_prot_op(scmd, prot_op);
621 scsi_set_prot_type(scmd, dif);
624 static void sd_config_discard(struct scsi_disk *sdkp, unsigned int mode)
626 struct request_queue *q = sdkp->disk->queue;
627 unsigned int logical_block_size = sdkp->device->sector_size;
628 unsigned int max_blocks = 0;
630 q->limits.discard_zeroes_data = sdkp->lbprz;
631 q->limits.discard_alignment = sdkp->unmap_alignment *
633 q->limits.discard_granularity =
634 max(sdkp->physical_block_size,
635 sdkp->unmap_granularity * logical_block_size);
637 sdkp->provisioning_mode = mode;
642 q->limits.max_discard_sectors = 0;
643 queue_flag_clear_unlocked(QUEUE_FLAG_DISCARD, q);
647 max_blocks = min_not_zero(sdkp->max_unmap_blocks,
648 (u32)SD_MAX_WS16_BLOCKS);
652 max_blocks = min_not_zero(sdkp->max_ws_blocks,
653 (u32)SD_MAX_WS16_BLOCKS);
657 max_blocks = min_not_zero(sdkp->max_ws_blocks,
658 (u32)SD_MAX_WS10_BLOCKS);
662 max_blocks = min_not_zero(sdkp->max_ws_blocks,
663 (u32)SD_MAX_WS10_BLOCKS);
664 q->limits.discard_zeroes_data = 1;
668 q->limits.max_discard_sectors = max_blocks * (logical_block_size >> 9);
669 queue_flag_set_unlocked(QUEUE_FLAG_DISCARD, q);
673 * sd_setup_discard_cmnd - unmap blocks on thinly provisioned device
674 * @sdp: scsi device to operate one
675 * @rq: Request to prepare
677 * Will issue either UNMAP or WRITE SAME(16) depending on preference
678 * indicated by target device.
680 static int sd_setup_discard_cmnd(struct scsi_device *sdp, struct request *rq)
682 struct scsi_disk *sdkp = scsi_disk(rq->rq_disk);
683 sector_t sector = blk_rq_pos(rq);
684 unsigned int nr_sectors = blk_rq_sectors(rq);
685 unsigned int nr_bytes = blk_rq_bytes(rq);
691 sector >>= ilog2(sdp->sector_size) - 9;
692 nr_sectors >>= ilog2(sdp->sector_size) - 9;
693 rq->timeout = SD_TIMEOUT;
695 memset(rq->cmd, 0, rq->cmd_len);
697 page = alloc_page(GFP_ATOMIC | __GFP_ZERO);
699 return BLKPREP_DEFER;
701 switch (sdkp->provisioning_mode) {
703 buf = page_address(page);
709 put_unaligned_be16(6 + 16, &buf[0]);
710 put_unaligned_be16(16, &buf[2]);
711 put_unaligned_be64(sector, &buf[8]);
712 put_unaligned_be32(nr_sectors, &buf[16]);
719 rq->cmd[0] = WRITE_SAME_16;
720 rq->cmd[1] = 0x8; /* UNMAP */
721 put_unaligned_be64(sector, &rq->cmd[2]);
722 put_unaligned_be32(nr_sectors, &rq->cmd[10]);
724 len = sdkp->device->sector_size;
730 rq->cmd[0] = WRITE_SAME;
731 if (sdkp->provisioning_mode == SD_LBP_WS10)
732 rq->cmd[1] = 0x8; /* UNMAP */
733 put_unaligned_be32(sector, &rq->cmd[2]);
734 put_unaligned_be16(nr_sectors, &rq->cmd[7]);
736 len = sdkp->device->sector_size;
744 rq->completion_data = page;
745 blk_add_request_payload(rq, page, len);
746 ret = scsi_setup_blk_pc_cmnd(sdp, rq);
747 rq->__data_len = nr_bytes;
750 if (ret != BLKPREP_OK)
755 static void sd_config_write_same(struct scsi_disk *sdkp)
757 struct request_queue *q = sdkp->disk->queue;
758 unsigned int logical_block_size = sdkp->device->sector_size;
760 if (sdkp->device->no_write_same) {
761 sdkp->max_ws_blocks = 0;
765 /* Some devices can not handle block counts above 0xffff despite
766 * supporting WRITE SAME(16). Consequently we default to 64k
767 * blocks per I/O unless the device explicitly advertises a
770 if (sdkp->max_ws_blocks > SD_MAX_WS10_BLOCKS)
771 sdkp->max_ws_blocks = min_not_zero(sdkp->max_ws_blocks,
772 (u32)SD_MAX_WS16_BLOCKS);
773 else if (sdkp->ws16 || sdkp->ws10 || sdkp->device->no_report_opcodes)
774 sdkp->max_ws_blocks = min_not_zero(sdkp->max_ws_blocks,
775 (u32)SD_MAX_WS10_BLOCKS);
777 sdkp->device->no_write_same = 1;
778 sdkp->max_ws_blocks = 0;
782 blk_queue_max_write_same_sectors(q, sdkp->max_ws_blocks *
783 (logical_block_size >> 9));
787 * sd_setup_write_same_cmnd - write the same data to multiple blocks
788 * @sdp: scsi device to operate one
789 * @rq: Request to prepare
791 * Will issue either WRITE SAME(10) or WRITE SAME(16) depending on
792 * preference indicated by target device.
794 static int sd_setup_write_same_cmnd(struct scsi_device *sdp, struct request *rq)
796 struct scsi_disk *sdkp = scsi_disk(rq->rq_disk);
797 struct bio *bio = rq->bio;
798 sector_t sector = blk_rq_pos(rq);
799 unsigned int nr_sectors = blk_rq_sectors(rq);
800 unsigned int nr_bytes = blk_rq_bytes(rq);
803 if (sdkp->device->no_write_same)
806 BUG_ON(bio_offset(bio) || bio_iovec(bio).bv_len != sdp->sector_size);
808 sector >>= ilog2(sdp->sector_size) - 9;
809 nr_sectors >>= ilog2(sdp->sector_size) - 9;
811 rq->__data_len = sdp->sector_size;
812 rq->timeout = SD_WRITE_SAME_TIMEOUT;
813 memset(rq->cmd, 0, rq->cmd_len);
815 if (sdkp->ws16 || sector > 0xffffffff || nr_sectors > 0xffff) {
817 rq->cmd[0] = WRITE_SAME_16;
818 put_unaligned_be64(sector, &rq->cmd[2]);
819 put_unaligned_be32(nr_sectors, &rq->cmd[10]);
822 rq->cmd[0] = WRITE_SAME;
823 put_unaligned_be32(sector, &rq->cmd[2]);
824 put_unaligned_be16(nr_sectors, &rq->cmd[7]);
827 ret = scsi_setup_blk_pc_cmnd(sdp, rq);
828 rq->__data_len = nr_bytes;
833 static int scsi_setup_flush_cmnd(struct scsi_device *sdp, struct request *rq)
835 rq->timeout *= SD_FLUSH_TIMEOUT_MULTIPLIER;
836 rq->retries = SD_MAX_RETRIES;
837 rq->cmd[0] = SYNCHRONIZE_CACHE;
840 return scsi_setup_blk_pc_cmnd(sdp, rq);
843 static void sd_uninit_command(struct scsi_cmnd *SCpnt)
845 struct request *rq = SCpnt->request;
847 if (rq->cmd_flags & REQ_DISCARD)
848 __free_page(rq->completion_data);
850 if (SCpnt->cmnd != rq->cmd) {
851 mempool_free(SCpnt->cmnd, sd_cdb_pool);
857 static int sd_init_command(struct scsi_cmnd *SCpnt)
859 struct request *rq = SCpnt->request;
860 struct scsi_device *sdp = SCpnt->device;
861 struct gendisk *disk = rq->rq_disk;
862 struct scsi_disk *sdkp;
863 sector_t block = blk_rq_pos(rq);
865 unsigned int this_count = blk_rq_sectors(rq);
867 unsigned char protect;
870 * Discard request come in as REQ_TYPE_FS but we turn them into
871 * block PC requests to make life easier.
873 if (rq->cmd_flags & REQ_DISCARD) {
874 ret = sd_setup_discard_cmnd(sdp, rq);
876 } else if (rq->cmd_flags & REQ_WRITE_SAME) {
877 ret = sd_setup_write_same_cmnd(sdp, rq);
879 } else if (rq->cmd_flags & REQ_FLUSH) {
880 ret = scsi_setup_flush_cmnd(sdp, rq);
883 ret = scsi_setup_fs_cmnd(sdp, rq);
884 if (ret != BLKPREP_OK)
887 sdkp = scsi_disk(disk);
889 /* from here on until we're complete, any goto out
890 * is used for a killable error condition */
894 scmd_printk(KERN_INFO, SCpnt,
895 "%s: block=%llu, count=%d\n",
896 __func__, (unsigned long long)block, this_count));
898 if (!sdp || !scsi_device_online(sdp) ||
899 block + blk_rq_sectors(rq) > get_capacity(disk)) {
900 SCSI_LOG_HLQUEUE(2, scmd_printk(KERN_INFO, SCpnt,
901 "Finishing %u sectors\n",
902 blk_rq_sectors(rq)));
903 SCSI_LOG_HLQUEUE(2, scmd_printk(KERN_INFO, SCpnt,
904 "Retry with 0x%p\n", SCpnt));
910 * quietly refuse to do anything to a changed disc until
911 * the changed bit has been reset
913 /* printk("SCSI disk has been changed or is not present. Prohibiting further I/O.\n"); */
918 * Some SD card readers can't handle multi-sector accesses which touch
919 * the last one or two hardware sectors. Split accesses as needed.
921 threshold = get_capacity(disk) - SD_LAST_BUGGY_SECTORS *
922 (sdp->sector_size / 512);
924 if (unlikely(sdp->last_sector_bug && block + this_count > threshold)) {
925 if (block < threshold) {
926 /* Access up to the threshold but not beyond */
927 this_count = threshold - block;
929 /* Access only a single hardware sector */
930 this_count = sdp->sector_size / 512;
934 SCSI_LOG_HLQUEUE(2, scmd_printk(KERN_INFO, SCpnt, "block=%llu\n",
935 (unsigned long long)block));
938 * If we have a 1K hardware sectorsize, prevent access to single
939 * 512 byte sectors. In theory we could handle this - in fact
940 * the scsi cdrom driver must be able to handle this because
941 * we typically use 1K blocksizes, and cdroms typically have
942 * 2K hardware sectorsizes. Of course, things are simpler
943 * with the cdrom, since it is read-only. For performance
944 * reasons, the filesystems should be able to handle this
945 * and not force the scsi disk driver to use bounce buffers
948 if (sdp->sector_size == 1024) {
949 if ((block & 1) || (blk_rq_sectors(rq) & 1)) {
950 scmd_printk(KERN_ERR, SCpnt,
951 "Bad block number requested\n");
955 this_count = this_count >> 1;
958 if (sdp->sector_size == 2048) {
959 if ((block & 3) || (blk_rq_sectors(rq) & 3)) {
960 scmd_printk(KERN_ERR, SCpnt,
961 "Bad block number requested\n");
965 this_count = this_count >> 2;
968 if (sdp->sector_size == 4096) {
969 if ((block & 7) || (blk_rq_sectors(rq) & 7)) {
970 scmd_printk(KERN_ERR, SCpnt,
971 "Bad block number requested\n");
975 this_count = this_count >> 3;
978 if (rq_data_dir(rq) == WRITE) {
979 if (!sdp->writeable) {
982 SCpnt->cmnd[0] = WRITE_6;
983 SCpnt->sc_data_direction = DMA_TO_DEVICE;
985 if (blk_integrity_rq(rq))
986 sd_dif_prepare(rq, block, sdp->sector_size);
988 } else if (rq_data_dir(rq) == READ) {
989 SCpnt->cmnd[0] = READ_6;
990 SCpnt->sc_data_direction = DMA_FROM_DEVICE;
992 scmd_printk(KERN_ERR, SCpnt, "Unknown command %llx\n", (unsigned long long) rq->cmd_flags);
996 SCSI_LOG_HLQUEUE(2, scmd_printk(KERN_INFO, SCpnt,
997 "%s %d/%u 512 byte blocks.\n",
998 (rq_data_dir(rq) == WRITE) ?
999 "writing" : "reading", this_count,
1000 blk_rq_sectors(rq)));
1002 /* Set RDPROTECT/WRPROTECT if disk is formatted with DIF */
1003 host_dif = scsi_host_dif_capable(sdp->host, sdkp->protection_type);
1009 if (host_dif == SD_DIF_TYPE2_PROTECTION) {
1010 SCpnt->cmnd = mempool_alloc(sd_cdb_pool, GFP_ATOMIC);
1012 if (unlikely(SCpnt->cmnd == NULL)) {
1013 ret = BLKPREP_DEFER;
1017 SCpnt->cmd_len = SD_EXT_CDB_SIZE;
1018 memset(SCpnt->cmnd, 0, SCpnt->cmd_len);
1019 SCpnt->cmnd[0] = VARIABLE_LENGTH_CMD;
1020 SCpnt->cmnd[7] = 0x18;
1021 SCpnt->cmnd[9] = (rq_data_dir(rq) == READ) ? READ_32 : WRITE_32;
1022 SCpnt->cmnd[10] = protect | ((rq->cmd_flags & REQ_FUA) ? 0x8 : 0);
1025 SCpnt->cmnd[12] = sizeof(block) > 4 ? (unsigned char) (block >> 56) & 0xff : 0;
1026 SCpnt->cmnd[13] = sizeof(block) > 4 ? (unsigned char) (block >> 48) & 0xff : 0;
1027 SCpnt->cmnd[14] = sizeof(block) > 4 ? (unsigned char) (block >> 40) & 0xff : 0;
1028 SCpnt->cmnd[15] = sizeof(block) > 4 ? (unsigned char) (block >> 32) & 0xff : 0;
1029 SCpnt->cmnd[16] = (unsigned char) (block >> 24) & 0xff;
1030 SCpnt->cmnd[17] = (unsigned char) (block >> 16) & 0xff;
1031 SCpnt->cmnd[18] = (unsigned char) (block >> 8) & 0xff;
1032 SCpnt->cmnd[19] = (unsigned char) block & 0xff;
1034 /* Expected Indirect LBA */
1035 SCpnt->cmnd[20] = (unsigned char) (block >> 24) & 0xff;
1036 SCpnt->cmnd[21] = (unsigned char) (block >> 16) & 0xff;
1037 SCpnt->cmnd[22] = (unsigned char) (block >> 8) & 0xff;
1038 SCpnt->cmnd[23] = (unsigned char) block & 0xff;
1040 /* Transfer length */
1041 SCpnt->cmnd[28] = (unsigned char) (this_count >> 24) & 0xff;
1042 SCpnt->cmnd[29] = (unsigned char) (this_count >> 16) & 0xff;
1043 SCpnt->cmnd[30] = (unsigned char) (this_count >> 8) & 0xff;
1044 SCpnt->cmnd[31] = (unsigned char) this_count & 0xff;
1045 } else if (sdp->use_16_for_rw) {
1046 SCpnt->cmnd[0] += READ_16 - READ_6;
1047 SCpnt->cmnd[1] = protect | ((rq->cmd_flags & REQ_FUA) ? 0x8 : 0);
1048 SCpnt->cmnd[2] = sizeof(block) > 4 ? (unsigned char) (block >> 56) & 0xff : 0;
1049 SCpnt->cmnd[3] = sizeof(block) > 4 ? (unsigned char) (block >> 48) & 0xff : 0;
1050 SCpnt->cmnd[4] = sizeof(block) > 4 ? (unsigned char) (block >> 40) & 0xff : 0;
1051 SCpnt->cmnd[5] = sizeof(block) > 4 ? (unsigned char) (block >> 32) & 0xff : 0;
1052 SCpnt->cmnd[6] = (unsigned char) (block >> 24) & 0xff;
1053 SCpnt->cmnd[7] = (unsigned char) (block >> 16) & 0xff;
1054 SCpnt->cmnd[8] = (unsigned char) (block >> 8) & 0xff;
1055 SCpnt->cmnd[9] = (unsigned char) block & 0xff;
1056 SCpnt->cmnd[10] = (unsigned char) (this_count >> 24) & 0xff;
1057 SCpnt->cmnd[11] = (unsigned char) (this_count >> 16) & 0xff;
1058 SCpnt->cmnd[12] = (unsigned char) (this_count >> 8) & 0xff;
1059 SCpnt->cmnd[13] = (unsigned char) this_count & 0xff;
1060 SCpnt->cmnd[14] = SCpnt->cmnd[15] = 0;
1061 } else if ((this_count > 0xff) || (block > 0x1fffff) ||
1062 scsi_device_protection(SCpnt->device) ||
1063 SCpnt->device->use_10_for_rw) {
1064 if (this_count > 0xffff)
1065 this_count = 0xffff;
1067 SCpnt->cmnd[0] += READ_10 - READ_6;
1068 SCpnt->cmnd[1] = protect | ((rq->cmd_flags & REQ_FUA) ? 0x8 : 0);
1069 SCpnt->cmnd[2] = (unsigned char) (block >> 24) & 0xff;
1070 SCpnt->cmnd[3] = (unsigned char) (block >> 16) & 0xff;
1071 SCpnt->cmnd[4] = (unsigned char) (block >> 8) & 0xff;
1072 SCpnt->cmnd[5] = (unsigned char) block & 0xff;
1073 SCpnt->cmnd[6] = SCpnt->cmnd[9] = 0;
1074 SCpnt->cmnd[7] = (unsigned char) (this_count >> 8) & 0xff;
1075 SCpnt->cmnd[8] = (unsigned char) this_count & 0xff;
1077 if (unlikely(rq->cmd_flags & REQ_FUA)) {
1079 * This happens only if this drive failed
1080 * 10byte rw command with ILLEGAL_REQUEST
1081 * during operation and thus turned off
1084 scmd_printk(KERN_ERR, SCpnt,
1085 "FUA write on READ/WRITE(6) drive\n");
1089 SCpnt->cmnd[1] |= (unsigned char) ((block >> 16) & 0x1f);
1090 SCpnt->cmnd[2] = (unsigned char) ((block >> 8) & 0xff);
1091 SCpnt->cmnd[3] = (unsigned char) block & 0xff;
1092 SCpnt->cmnd[4] = (unsigned char) this_count;
1095 SCpnt->sdb.length = this_count * sdp->sector_size;
1097 /* If DIF or DIX is enabled, tell HBA how to handle request */
1098 if (host_dif || scsi_prot_sg_count(SCpnt))
1099 sd_prot_op(SCpnt, host_dif);
1102 * We shouldn't disconnect in the middle of a sector, so with a dumb
1103 * host adapter, it's safe to assume that we can at least transfer
1104 * this many bytes between each connect / disconnect.
1106 SCpnt->transfersize = sdp->sector_size;
1107 SCpnt->underflow = this_count << 9;
1108 SCpnt->allowed = SD_MAX_RETRIES;
1111 * This indicates that the command is ready from our end to be
1120 * sd_open - open a scsi disk device
1121 * @inode: only i_rdev member may be used
1122 * @filp: only f_mode and f_flags may be used
1124 * Returns 0 if successful. Returns a negated errno value in case
1127 * Note: This can be called from a user context (e.g. fsck(1) )
1128 * or from within the kernel (e.g. as a result of a mount(1) ).
1129 * In the latter case @inode and @filp carry an abridged amount
1130 * of information as noted above.
1132 * Locking: called with bdev->bd_mutex held.
1134 static int sd_open(struct block_device *bdev, fmode_t mode)
1136 struct scsi_disk *sdkp = scsi_disk_get(bdev->bd_disk);
1137 struct scsi_device *sdev;
1143 SCSI_LOG_HLQUEUE(3, sd_printk(KERN_INFO, sdkp, "sd_open\n"));
1145 sdev = sdkp->device;
1148 * If the device is in error recovery, wait until it is done.
1149 * If the device is offline, then disallow any access to it.
1152 if (!scsi_block_when_processing_errors(sdev))
1155 if (sdev->removable || sdkp->write_prot)
1156 check_disk_change(bdev);
1159 * If the drive is empty, just let the open fail.
1161 retval = -ENOMEDIUM;
1162 if (sdev->removable && !sdkp->media_present && !(mode & FMODE_NDELAY))
1166 * If the device has the write protect tab set, have the open fail
1167 * if the user expects to be able to write to the thing.
1170 if (sdkp->write_prot && (mode & FMODE_WRITE))
1174 * It is possible that the disk changing stuff resulted in
1175 * the device being taken offline. If this is the case,
1176 * report this to the user, and don't pretend that the
1177 * open actually succeeded.
1180 if (!scsi_device_online(sdev))
1183 if ((atomic_inc_return(&sdkp->openers) == 1) && sdev->removable) {
1184 if (scsi_block_when_processing_errors(sdev))
1185 scsi_set_medium_removal(sdev, SCSI_REMOVAL_PREVENT);
1191 scsi_disk_put(sdkp);
1196 * sd_release - invoked when the (last) close(2) is called on this
1198 * @inode: only i_rdev member may be used
1199 * @filp: only f_mode and f_flags may be used
1203 * Note: may block (uninterruptible) if error recovery is underway
1206 * Locking: called with bdev->bd_mutex held.
1208 static void sd_release(struct gendisk *disk, fmode_t mode)
1210 struct scsi_disk *sdkp = scsi_disk(disk);
1211 struct scsi_device *sdev = sdkp->device;
1213 SCSI_LOG_HLQUEUE(3, sd_printk(KERN_INFO, sdkp, "sd_release\n"));
1215 if (atomic_dec_return(&sdkp->openers) == 0 && sdev->removable) {
1216 if (scsi_block_when_processing_errors(sdev))
1217 scsi_set_medium_removal(sdev, SCSI_REMOVAL_ALLOW);
1221 * XXX and what if there are packets in flight and this close()
1222 * XXX is followed by a "rmmod sd_mod"?
1225 scsi_disk_put(sdkp);
1228 static int sd_getgeo(struct block_device *bdev, struct hd_geometry *geo)
1230 struct scsi_disk *sdkp = scsi_disk(bdev->bd_disk);
1231 struct scsi_device *sdp = sdkp->device;
1232 struct Scsi_Host *host = sdp->host;
1235 /* default to most commonly used values */
1236 diskinfo[0] = 0x40; /* 1 << 6 */
1237 diskinfo[1] = 0x20; /* 1 << 5 */
1238 diskinfo[2] = sdkp->capacity >> 11;
1240 /* override with calculated, extended default, or driver values */
1241 if (host->hostt->bios_param)
1242 host->hostt->bios_param(sdp, bdev, sdkp->capacity, diskinfo);
1244 scsicam_bios_param(bdev, sdkp->capacity, diskinfo);
1246 geo->heads = diskinfo[0];
1247 geo->sectors = diskinfo[1];
1248 geo->cylinders = diskinfo[2];
1253 * sd_ioctl - process an ioctl
1254 * @inode: only i_rdev/i_bdev members may be used
1255 * @filp: only f_mode and f_flags may be used
1256 * @cmd: ioctl command number
1257 * @arg: this is third argument given to ioctl(2) system call.
1258 * Often contains a pointer.
1260 * Returns 0 if successful (some ioctls return positive numbers on
1261 * success as well). Returns a negated errno value in case of error.
1263 * Note: most ioctls are forward onto the block subsystem or further
1264 * down in the scsi subsystem.
1266 static int sd_ioctl(struct block_device *bdev, fmode_t mode,
1267 unsigned int cmd, unsigned long arg)
1269 struct gendisk *disk = bdev->bd_disk;
1270 struct scsi_disk *sdkp = scsi_disk(disk);
1271 struct scsi_device *sdp = sdkp->device;
1272 void __user *p = (void __user *)arg;
1275 SCSI_LOG_IOCTL(1, sd_printk(KERN_INFO, sdkp, "sd_ioctl: disk=%s, "
1276 "cmd=0x%x\n", disk->disk_name, cmd));
1278 error = scsi_verify_blk_ioctl(bdev, cmd);
1283 * If we are in the middle of error recovery, don't let anyone
1284 * else try and use this device. Also, if error recovery fails, it
1285 * may try and take the device offline, in which case all further
1286 * access to the device is prohibited.
1288 error = scsi_nonblockable_ioctl(sdp, cmd, p,
1289 (mode & FMODE_NDELAY) != 0);
1290 if (!scsi_block_when_processing_errors(sdp) || !error)
1294 * Send SCSI addressing ioctls directly to mid level, send other
1295 * ioctls to block level and then onto mid level if they can't be
1299 case SCSI_IOCTL_GET_IDLUN:
1300 case SCSI_IOCTL_GET_BUS_NUMBER:
1301 error = scsi_ioctl(sdp, cmd, p);
1304 error = scsi_cmd_blk_ioctl(bdev, mode, cmd, p);
1305 if (error != -ENOTTY)
1307 error = scsi_ioctl(sdp, cmd, p);
1314 static void set_media_not_present(struct scsi_disk *sdkp)
1316 if (sdkp->media_present)
1317 sdkp->device->changed = 1;
1319 if (sdkp->device->removable) {
1320 sdkp->media_present = 0;
1325 static int media_not_present(struct scsi_disk *sdkp,
1326 struct scsi_sense_hdr *sshdr)
1328 if (!scsi_sense_valid(sshdr))
1331 /* not invoked for commands that could return deferred errors */
1332 switch (sshdr->sense_key) {
1333 case UNIT_ATTENTION:
1335 /* medium not present */
1336 if (sshdr->asc == 0x3A) {
1337 set_media_not_present(sdkp);
1345 * sd_check_events - check media events
1346 * @disk: kernel device descriptor
1347 * @clearing: disk events currently being cleared
1349 * Returns mask of DISK_EVENT_*.
1351 * Note: this function is invoked from the block subsystem.
1353 static unsigned int sd_check_events(struct gendisk *disk, unsigned int clearing)
1355 struct scsi_disk *sdkp = scsi_disk(disk);
1356 struct scsi_device *sdp = sdkp->device;
1357 struct scsi_sense_hdr *sshdr = NULL;
1360 SCSI_LOG_HLQUEUE(3, sd_printk(KERN_INFO, sdkp, "sd_check_events\n"));
1363 * If the device is offline, don't send any commands - just pretend as
1364 * if the command failed. If the device ever comes back online, we
1365 * can deal with it then. It is only because of unrecoverable errors
1366 * that we would ever take a device offline in the first place.
1368 if (!scsi_device_online(sdp)) {
1369 set_media_not_present(sdkp);
1374 * Using TEST_UNIT_READY enables differentiation between drive with
1375 * no cartridge loaded - NOT READY, drive with changed cartridge -
1376 * UNIT ATTENTION, or with same cartridge - GOOD STATUS.
1378 * Drives that auto spin down. eg iomega jaz 1G, will be started
1379 * by sd_spinup_disk() from sd_revalidate_disk(), which happens whenever
1380 * sd_revalidate() is called.
1384 if (scsi_block_when_processing_errors(sdp)) {
1385 sshdr = kzalloc(sizeof(*sshdr), GFP_KERNEL);
1386 retval = scsi_test_unit_ready(sdp, SD_TIMEOUT, SD_MAX_RETRIES,
1390 /* failed to execute TUR, assume media not present */
1391 if (host_byte(retval)) {
1392 set_media_not_present(sdkp);
1396 if (media_not_present(sdkp, sshdr))
1400 * For removable scsi disk we have to recognise the presence
1401 * of a disk in the drive.
1403 if (!sdkp->media_present)
1405 sdkp->media_present = 1;
1408 * sdp->changed is set under the following conditions:
1410 * Medium present state has changed in either direction.
1411 * Device has indicated UNIT_ATTENTION.
1414 retval = sdp->changed ? DISK_EVENT_MEDIA_CHANGE : 0;
1419 static int sd_sync_cache(struct scsi_disk *sdkp)
1422 struct scsi_device *sdp = sdkp->device;
1423 const int timeout = sdp->request_queue->rq_timeout
1424 * SD_FLUSH_TIMEOUT_MULTIPLIER;
1425 struct scsi_sense_hdr sshdr;
1427 if (!scsi_device_online(sdp))
1430 for (retries = 3; retries > 0; --retries) {
1431 unsigned char cmd[10] = { 0 };
1433 cmd[0] = SYNCHRONIZE_CACHE;
1435 * Leave the rest of the command zero to indicate
1438 res = scsi_execute_req_flags(sdp, cmd, DMA_NONE, NULL, 0,
1439 &sshdr, timeout, SD_MAX_RETRIES,
1446 sd_print_result(sdkp, res);
1448 if (driver_byte(res) & DRIVER_SENSE)
1449 sd_print_sense_hdr(sdkp, &sshdr);
1450 /* we need to evaluate the error return */
1451 if (scsi_sense_valid(&sshdr) &&
1452 (sshdr.asc == 0x3a || /* medium not present */
1453 sshdr.asc == 0x20)) /* invalid command */
1454 /* this is no error here */
1457 switch (host_byte(res)) {
1458 /* ignore errors due to racing a disconnection */
1459 case DID_BAD_TARGET:
1460 case DID_NO_CONNECT:
1462 /* signal the upper layer it might try again */
1466 case DID_SOFT_ERROR:
1475 static void sd_rescan(struct device *dev)
1477 struct scsi_disk *sdkp = scsi_disk_get_from_dev(dev);
1480 revalidate_disk(sdkp->disk);
1481 scsi_disk_put(sdkp);
1486 #ifdef CONFIG_COMPAT
1488 * This gets directly called from VFS. When the ioctl
1489 * is not recognized we go back to the other translation paths.
1491 static int sd_compat_ioctl(struct block_device *bdev, fmode_t mode,
1492 unsigned int cmd, unsigned long arg)
1494 struct scsi_device *sdev = scsi_disk(bdev->bd_disk)->device;
1497 ret = scsi_verify_blk_ioctl(bdev, cmd);
1502 * If we are in the middle of error recovery, don't let anyone
1503 * else try and use this device. Also, if error recovery fails, it
1504 * may try and take the device offline, in which case all further
1505 * access to the device is prohibited.
1507 if (!scsi_block_when_processing_errors(sdev))
1510 if (sdev->host->hostt->compat_ioctl) {
1511 ret = sdev->host->hostt->compat_ioctl(sdev, cmd, (void __user *)arg);
1517 * Let the static ioctl translation table take care of it.
1519 return -ENOIOCTLCMD;
1523 static const struct block_device_operations sd_fops = {
1524 .owner = THIS_MODULE,
1526 .release = sd_release,
1528 .getgeo = sd_getgeo,
1529 #ifdef CONFIG_COMPAT
1530 .compat_ioctl = sd_compat_ioctl,
1532 .check_events = sd_check_events,
1533 .revalidate_disk = sd_revalidate_disk,
1534 .unlock_native_capacity = sd_unlock_native_capacity,
1538 * sd_eh_action - error handling callback
1539 * @scmd: sd-issued command that has failed
1540 * @eh_disp: The recovery disposition suggested by the midlayer
1542 * This function is called by the SCSI midlayer upon completion of an
1543 * error test command (currently TEST UNIT READY). The result of sending
1544 * the eh command is passed in eh_disp. We're looking for devices that
1545 * fail medium access commands but are OK with non access commands like
1546 * test unit ready (so wrongly see the device as having a successful
1549 static int sd_eh_action(struct scsi_cmnd *scmd, int eh_disp)
1551 struct scsi_disk *sdkp = scsi_disk(scmd->request->rq_disk);
1553 if (!scsi_device_online(scmd->device) ||
1554 !scsi_medium_access_command(scmd) ||
1555 host_byte(scmd->result) != DID_TIME_OUT ||
1560 * The device has timed out executing a medium access command.
1561 * However, the TEST UNIT READY command sent during error
1562 * handling completed successfully. Either the device is in the
1563 * process of recovering or has it suffered an internal failure
1564 * that prevents access to the storage medium.
1566 sdkp->medium_access_timed_out++;
1569 * If the device keeps failing read/write commands but TEST UNIT
1570 * READY always completes successfully we assume that medium
1571 * access is no longer possible and take the device offline.
1573 if (sdkp->medium_access_timed_out >= sdkp->max_medium_access_timeouts) {
1574 scmd_printk(KERN_ERR, scmd,
1575 "Medium access timeout failure. Offlining disk!\n");
1576 scsi_device_set_state(scmd->device, SDEV_OFFLINE);
1584 static unsigned int sd_completed_bytes(struct scsi_cmnd *scmd)
1586 u64 start_lba = blk_rq_pos(scmd->request);
1587 u64 end_lba = blk_rq_pos(scmd->request) + (scsi_bufflen(scmd) / 512);
1591 * resid is optional but mostly filled in. When it's unused,
1592 * its value is zero, so we assume the whole buffer transferred
1594 unsigned int transferred = scsi_bufflen(scmd) - scsi_get_resid(scmd);
1595 unsigned int good_bytes;
1597 if (scmd->request->cmd_type != REQ_TYPE_FS)
1600 info_valid = scsi_get_sense_info_fld(scmd->sense_buffer,
1601 SCSI_SENSE_BUFFERSIZE,
1606 if (scsi_bufflen(scmd) <= scmd->device->sector_size)
1609 if (scmd->device->sector_size < 512) {
1610 /* only legitimate sector_size here is 256 */
1614 /* be careful ... don't want any overflows */
1615 unsigned int factor = scmd->device->sector_size / 512;
1616 do_div(start_lba, factor);
1617 do_div(end_lba, factor);
1620 /* The bad lba was reported incorrectly, we have no idea where
1623 if (bad_lba < start_lba || bad_lba >= end_lba)
1626 /* This computation should always be done in terms of
1627 * the resolution of the device's medium.
1629 good_bytes = (bad_lba - start_lba) * scmd->device->sector_size;
1630 return min(good_bytes, transferred);
1634 * sd_done - bottom half handler: called when the lower level
1635 * driver has completed (successfully or otherwise) a scsi command.
1636 * @SCpnt: mid-level's per command structure.
1638 * Note: potentially run from within an ISR. Must not block.
1640 static int sd_done(struct scsi_cmnd *SCpnt)
1642 int result = SCpnt->result;
1643 unsigned int good_bytes = result ? 0 : scsi_bufflen(SCpnt);
1644 struct scsi_sense_hdr sshdr;
1645 struct scsi_disk *sdkp = scsi_disk(SCpnt->request->rq_disk);
1646 struct request *req = SCpnt->request;
1647 int sense_valid = 0;
1648 int sense_deferred = 0;
1649 unsigned char op = SCpnt->cmnd[0];
1650 unsigned char unmap = SCpnt->cmnd[1] & 8;
1652 if (req->cmd_flags & REQ_DISCARD || req->cmd_flags & REQ_WRITE_SAME) {
1654 good_bytes = blk_rq_bytes(req);
1655 scsi_set_resid(SCpnt, 0);
1658 scsi_set_resid(SCpnt, blk_rq_bytes(req));
1663 sense_valid = scsi_command_normalize_sense(SCpnt, &sshdr);
1665 sense_deferred = scsi_sense_is_deferred(&sshdr);
1667 #ifdef CONFIG_SCSI_LOGGING
1668 SCSI_LOG_HLCOMPLETE(1, scsi_print_result(SCpnt));
1670 SCSI_LOG_HLCOMPLETE(1, scmd_printk(KERN_INFO, SCpnt,
1671 "sd_done: sb[respc,sk,asc,"
1672 "ascq]=%x,%x,%x,%x\n",
1673 sshdr.response_code,
1674 sshdr.sense_key, sshdr.asc,
1678 sdkp->medium_access_timed_out = 0;
1680 if (driver_byte(result) != DRIVER_SENSE &&
1681 (!sense_valid || sense_deferred))
1684 switch (sshdr.sense_key) {
1685 case HARDWARE_ERROR:
1687 good_bytes = sd_completed_bytes(SCpnt);
1689 case RECOVERED_ERROR:
1690 good_bytes = scsi_bufflen(SCpnt);
1693 /* This indicates a false check condition, so ignore it. An
1694 * unknown amount of data was transferred so treat it as an
1697 scsi_print_sense("sd", SCpnt);
1699 memset(SCpnt->sense_buffer, 0, SCSI_SENSE_BUFFERSIZE);
1701 case ABORTED_COMMAND:
1702 if (sshdr.asc == 0x10) /* DIF: Target detected corruption */
1703 good_bytes = sd_completed_bytes(SCpnt);
1705 case ILLEGAL_REQUEST:
1706 if (sshdr.asc == 0x10) /* DIX: Host detected corruption */
1707 good_bytes = sd_completed_bytes(SCpnt);
1708 /* INVALID COMMAND OPCODE or INVALID FIELD IN CDB */
1709 if (sshdr.asc == 0x20 || sshdr.asc == 0x24) {
1712 sd_config_discard(sdkp, SD_LBP_DISABLE);
1717 sd_config_discard(sdkp, SD_LBP_DISABLE);
1719 sdkp->device->no_write_same = 1;
1720 sd_config_write_same(sdkp);
1723 req->__data_len = blk_rq_bytes(req);
1724 req->cmd_flags |= REQ_QUIET;
1733 if (rq_data_dir(SCpnt->request) == READ && scsi_prot_sg_count(SCpnt))
1734 sd_dif_complete(SCpnt, good_bytes);
1740 * spinup disk - called only in sd_revalidate_disk()
1743 sd_spinup_disk(struct scsi_disk *sdkp)
1745 unsigned char cmd[10];
1746 unsigned long spintime_expire = 0;
1747 int retries, spintime;
1748 unsigned int the_result;
1749 struct scsi_sense_hdr sshdr;
1750 int sense_valid = 0;
1754 /* Spin up drives, as required. Only do this at boot time */
1755 /* Spinup needs to be done for module loads too. */
1760 cmd[0] = TEST_UNIT_READY;
1761 memset((void *) &cmd[1], 0, 9);
1763 the_result = scsi_execute_req(sdkp->device, cmd,
1766 SD_MAX_RETRIES, NULL);
1769 * If the drive has indicated to us that it
1770 * doesn't have any media in it, don't bother
1771 * with any more polling.
1773 if (media_not_present(sdkp, &sshdr))
1777 sense_valid = scsi_sense_valid(&sshdr);
1779 } while (retries < 3 &&
1780 (!scsi_status_is_good(the_result) ||
1781 ((driver_byte(the_result) & DRIVER_SENSE) &&
1782 sense_valid && sshdr.sense_key == UNIT_ATTENTION)));
1784 if ((driver_byte(the_result) & DRIVER_SENSE) == 0) {
1785 /* no sense, TUR either succeeded or failed
1786 * with a status error */
1787 if(!spintime && !scsi_status_is_good(the_result)) {
1788 sd_printk(KERN_NOTICE, sdkp, "Unit Not Ready\n");
1789 sd_print_result(sdkp, the_result);
1795 * The device does not want the automatic start to be issued.
1797 if (sdkp->device->no_start_on_add)
1800 if (sense_valid && sshdr.sense_key == NOT_READY) {
1801 if (sshdr.asc == 4 && sshdr.ascq == 3)
1802 break; /* manual intervention required */
1803 if (sshdr.asc == 4 && sshdr.ascq == 0xb)
1804 break; /* standby */
1805 if (sshdr.asc == 4 && sshdr.ascq == 0xc)
1806 break; /* unavailable */
1808 * Issue command to spin up drive when not ready
1811 sd_printk(KERN_NOTICE, sdkp, "Spinning up disk...");
1812 cmd[0] = START_STOP;
1813 cmd[1] = 1; /* Return immediately */
1814 memset((void *) &cmd[2], 0, 8);
1815 cmd[4] = 1; /* Start spin cycle */
1816 if (sdkp->device->start_stop_pwr_cond)
1818 scsi_execute_req(sdkp->device, cmd, DMA_NONE,
1820 SD_TIMEOUT, SD_MAX_RETRIES,
1822 spintime_expire = jiffies + 100 * HZ;
1825 /* Wait 1 second for next try */
1830 * Wait for USB flash devices with slow firmware.
1831 * Yes, this sense key/ASC combination shouldn't
1832 * occur here. It's characteristic of these devices.
1834 } else if (sense_valid &&
1835 sshdr.sense_key == UNIT_ATTENTION &&
1836 sshdr.asc == 0x28) {
1838 spintime_expire = jiffies + 5 * HZ;
1841 /* Wait 1 second for next try */
1844 /* we don't understand the sense code, so it's
1845 * probably pointless to loop */
1847 sd_printk(KERN_NOTICE, sdkp, "Unit Not Ready\n");
1848 sd_print_sense_hdr(sdkp, &sshdr);
1853 } while (spintime && time_before_eq(jiffies, spintime_expire));
1856 if (scsi_status_is_good(the_result))
1859 printk("not responding...\n");
1865 * Determine whether disk supports Data Integrity Field.
1867 static int sd_read_protection_type(struct scsi_disk *sdkp, unsigned char *buffer)
1869 struct scsi_device *sdp = sdkp->device;
1873 if (scsi_device_protection(sdp) == 0 || (buffer[12] & 1) == 0)
1876 type = ((buffer[12] >> 1) & 7) + 1; /* P_TYPE 0 = Type 1 */
1878 if (type > SD_DIF_TYPE3_PROTECTION)
1880 else if (scsi_host_dif_capable(sdp->host, type))
1883 if (sdkp->first_scan || type != sdkp->protection_type)
1886 sd_printk(KERN_ERR, sdkp, "formatted with unsupported" \
1887 " protection type %u. Disabling disk!\n",
1891 sd_printk(KERN_NOTICE, sdkp,
1892 "Enabling DIF Type %u protection\n", type);
1895 sd_printk(KERN_NOTICE, sdkp,
1896 "Disabling DIF Type %u protection\n", type);
1900 sdkp->protection_type = type;
1905 static void read_capacity_error(struct scsi_disk *sdkp, struct scsi_device *sdp,
1906 struct scsi_sense_hdr *sshdr, int sense_valid,
1909 sd_print_result(sdkp, the_result);
1910 if (driver_byte(the_result) & DRIVER_SENSE)
1911 sd_print_sense_hdr(sdkp, sshdr);
1913 sd_printk(KERN_NOTICE, sdkp, "Sense not available.\n");
1916 * Set dirty bit for removable devices if not ready -
1917 * sometimes drives will not report this properly.
1919 if (sdp->removable &&
1920 sense_valid && sshdr->sense_key == NOT_READY)
1921 set_media_not_present(sdkp);
1924 * We used to set media_present to 0 here to indicate no media
1925 * in the drive, but some drives fail read capacity even with
1926 * media present, so we can't do that.
1928 sdkp->capacity = 0; /* unknown mapped to zero - as usual */
1932 #if RC16_LEN > SD_BUF_SIZE
1933 #error RC16_LEN must not be more than SD_BUF_SIZE
1936 #define READ_CAPACITY_RETRIES_ON_RESET 10
1938 static int read_capacity_16(struct scsi_disk *sdkp, struct scsi_device *sdp,
1939 unsigned char *buffer)
1941 unsigned char cmd[16];
1942 struct scsi_sense_hdr sshdr;
1943 int sense_valid = 0;
1945 int retries = 3, reset_retries = READ_CAPACITY_RETRIES_ON_RESET;
1946 unsigned int alignment;
1947 unsigned long long lba;
1948 unsigned sector_size;
1950 if (sdp->no_read_capacity_16)
1955 cmd[0] = SERVICE_ACTION_IN;
1956 cmd[1] = SAI_READ_CAPACITY_16;
1958 memset(buffer, 0, RC16_LEN);
1960 the_result = scsi_execute_req(sdp, cmd, DMA_FROM_DEVICE,
1961 buffer, RC16_LEN, &sshdr,
1962 SD_TIMEOUT, SD_MAX_RETRIES, NULL);
1964 if (media_not_present(sdkp, &sshdr))
1968 sense_valid = scsi_sense_valid(&sshdr);
1970 sshdr.sense_key == ILLEGAL_REQUEST &&
1971 (sshdr.asc == 0x20 || sshdr.asc == 0x24) &&
1973 /* Invalid Command Operation Code or
1974 * Invalid Field in CDB, just retry
1975 * silently with RC10 */
1978 sshdr.sense_key == UNIT_ATTENTION &&
1979 sshdr.asc == 0x29 && sshdr.ascq == 0x00)
1980 /* Device reset might occur several times,
1981 * give it one more chance */
1982 if (--reset_retries > 0)
1987 } while (the_result && retries);
1990 sd_printk(KERN_NOTICE, sdkp, "READ CAPACITY(16) failed\n");
1991 read_capacity_error(sdkp, sdp, &sshdr, sense_valid, the_result);
1995 sector_size = get_unaligned_be32(&buffer[8]);
1996 lba = get_unaligned_be64(&buffer[0]);
1998 if (sd_read_protection_type(sdkp, buffer) < 0) {
2003 if ((sizeof(sdkp->capacity) == 4) && (lba >= 0xffffffffULL)) {
2004 sd_printk(KERN_ERR, sdkp, "Too big for this kernel. Use a "
2005 "kernel compiled with support for large block "
2011 /* Logical blocks per physical block exponent */
2012 sdkp->physical_block_size = (1 << (buffer[13] & 0xf)) * sector_size;
2014 /* Lowest aligned logical block */
2015 alignment = ((buffer[14] & 0x3f) << 8 | buffer[15]) * sector_size;
2016 blk_queue_alignment_offset(sdp->request_queue, alignment);
2017 if (alignment && sdkp->first_scan)
2018 sd_printk(KERN_NOTICE, sdkp,
2019 "physical block alignment offset: %u\n", alignment);
2021 if (buffer[14] & 0x80) { /* LBPME */
2024 if (buffer[14] & 0x40) /* LBPRZ */
2027 sd_config_discard(sdkp, SD_LBP_WS16);
2030 sdkp->capacity = lba + 1;
2034 static int read_capacity_10(struct scsi_disk *sdkp, struct scsi_device *sdp,
2035 unsigned char *buffer)
2037 unsigned char cmd[16];
2038 struct scsi_sense_hdr sshdr;
2039 int sense_valid = 0;
2041 int retries = 3, reset_retries = READ_CAPACITY_RETRIES_ON_RESET;
2043 unsigned sector_size;
2046 cmd[0] = READ_CAPACITY;
2047 memset(&cmd[1], 0, 9);
2048 memset(buffer, 0, 8);
2050 the_result = scsi_execute_req(sdp, cmd, DMA_FROM_DEVICE,
2052 SD_TIMEOUT, SD_MAX_RETRIES, NULL);
2054 if (media_not_present(sdkp, &sshdr))
2058 sense_valid = scsi_sense_valid(&sshdr);
2060 sshdr.sense_key == UNIT_ATTENTION &&
2061 sshdr.asc == 0x29 && sshdr.ascq == 0x00)
2062 /* Device reset might occur several times,
2063 * give it one more chance */
2064 if (--reset_retries > 0)
2069 } while (the_result && retries);
2072 sd_printk(KERN_NOTICE, sdkp, "READ CAPACITY failed\n");
2073 read_capacity_error(sdkp, sdp, &sshdr, sense_valid, the_result);
2077 sector_size = get_unaligned_be32(&buffer[4]);
2078 lba = get_unaligned_be32(&buffer[0]);
2080 if (sdp->no_read_capacity_16 && (lba == 0xffffffff)) {
2081 /* Some buggy (usb cardreader) devices return an lba of
2082 0xffffffff when the want to report a size of 0 (with
2083 which they really mean no media is present) */
2085 sdkp->physical_block_size = sector_size;
2089 if ((sizeof(sdkp->capacity) == 4) && (lba == 0xffffffff)) {
2090 sd_printk(KERN_ERR, sdkp, "Too big for this kernel. Use a "
2091 "kernel compiled with support for large block "
2097 sdkp->capacity = lba + 1;
2098 sdkp->physical_block_size = sector_size;
2102 static int sd_try_rc16_first(struct scsi_device *sdp)
2104 if (sdp->host->max_cmd_len < 16)
2106 if (sdp->try_rc_10_first)
2108 if (sdp->scsi_level > SCSI_SPC_2)
2110 if (scsi_device_protection(sdp))
2116 * read disk capacity
2119 sd_read_capacity(struct scsi_disk *sdkp, unsigned char *buffer)
2122 struct scsi_device *sdp = sdkp->device;
2123 sector_t old_capacity = sdkp->capacity;
2125 if (sd_try_rc16_first(sdp)) {
2126 sector_size = read_capacity_16(sdkp, sdp, buffer);
2127 if (sector_size == -EOVERFLOW)
2129 if (sector_size == -ENODEV)
2131 if (sector_size < 0)
2132 sector_size = read_capacity_10(sdkp, sdp, buffer);
2133 if (sector_size < 0)
2136 sector_size = read_capacity_10(sdkp, sdp, buffer);
2137 if (sector_size == -EOVERFLOW)
2139 if (sector_size < 0)
2141 if ((sizeof(sdkp->capacity) > 4) &&
2142 (sdkp->capacity > 0xffffffffULL)) {
2143 int old_sector_size = sector_size;
2144 sd_printk(KERN_NOTICE, sdkp, "Very big device. "
2145 "Trying to use READ CAPACITY(16).\n");
2146 sector_size = read_capacity_16(sdkp, sdp, buffer);
2147 if (sector_size < 0) {
2148 sd_printk(KERN_NOTICE, sdkp,
2149 "Using 0xffffffff as device size\n");
2150 sdkp->capacity = 1 + (sector_t) 0xffffffff;
2151 sector_size = old_sector_size;
2157 /* Some devices are known to return the total number of blocks,
2158 * not the highest block number. Some devices have versions
2159 * which do this and others which do not. Some devices we might
2160 * suspect of doing this but we don't know for certain.
2162 * If we know the reported capacity is wrong, decrement it. If
2163 * we can only guess, then assume the number of blocks is even
2164 * (usually true but not always) and err on the side of lowering
2167 if (sdp->fix_capacity ||
2168 (sdp->guess_capacity && (sdkp->capacity & 0x01))) {
2169 sd_printk(KERN_INFO, sdkp, "Adjusting the sector count "
2170 "from its reported value: %llu\n",
2171 (unsigned long long) sdkp->capacity);
2176 if (sector_size == 0) {
2178 sd_printk(KERN_NOTICE, sdkp, "Sector size 0 reported, "
2182 if (sector_size != 512 &&
2183 sector_size != 1024 &&
2184 sector_size != 2048 &&
2185 sector_size != 4096 &&
2186 sector_size != 256) {
2187 sd_printk(KERN_NOTICE, sdkp, "Unsupported sector size %d.\n",
2190 * The user might want to re-format the drive with
2191 * a supported sectorsize. Once this happens, it
2192 * would be relatively trivial to set the thing up.
2193 * For this reason, we leave the thing in the table.
2197 * set a bogus sector size so the normal read/write
2198 * logic in the block layer will eventually refuse any
2199 * request on this device without tripping over power
2200 * of two sector size assumptions
2204 blk_queue_logical_block_size(sdp->request_queue, sector_size);
2207 char cap_str_2[10], cap_str_10[10];
2208 u64 sz = (u64)sdkp->capacity << ilog2(sector_size);
2210 string_get_size(sz, STRING_UNITS_2, cap_str_2,
2212 string_get_size(sz, STRING_UNITS_10, cap_str_10,
2213 sizeof(cap_str_10));
2215 if (sdkp->first_scan || old_capacity != sdkp->capacity) {
2216 sd_printk(KERN_NOTICE, sdkp,
2217 "%llu %d-byte logical blocks: (%s/%s)\n",
2218 (unsigned long long)sdkp->capacity,
2219 sector_size, cap_str_10, cap_str_2);
2221 if (sdkp->physical_block_size != sector_size)
2222 sd_printk(KERN_NOTICE, sdkp,
2223 "%u-byte physical blocks\n",
2224 sdkp->physical_block_size);
2228 sdp->use_16_for_rw = (sdkp->capacity > 0xffffffff);
2230 /* Rescale capacity to 512-byte units */
2231 if (sector_size == 4096)
2232 sdkp->capacity <<= 3;
2233 else if (sector_size == 2048)
2234 sdkp->capacity <<= 2;
2235 else if (sector_size == 1024)
2236 sdkp->capacity <<= 1;
2237 else if (sector_size == 256)
2238 sdkp->capacity >>= 1;
2240 blk_queue_physical_block_size(sdp->request_queue,
2241 sdkp->physical_block_size);
2242 sdkp->device->sector_size = sector_size;
2245 /* called with buffer of length 512 */
2247 sd_do_mode_sense(struct scsi_device *sdp, int dbd, int modepage,
2248 unsigned char *buffer, int len, struct scsi_mode_data *data,
2249 struct scsi_sense_hdr *sshdr)
2251 return scsi_mode_sense(sdp, dbd, modepage, buffer, len,
2252 SD_TIMEOUT, SD_MAX_RETRIES, data,
2257 * read write protect setting, if possible - called only in sd_revalidate_disk()
2258 * called with buffer of length SD_BUF_SIZE
2261 sd_read_write_protect_flag(struct scsi_disk *sdkp, unsigned char *buffer)
2264 struct scsi_device *sdp = sdkp->device;
2265 struct scsi_mode_data data;
2266 int old_wp = sdkp->write_prot;
2268 set_disk_ro(sdkp->disk, 0);
2269 if (sdp->skip_ms_page_3f) {
2270 sd_first_printk(KERN_NOTICE, sdkp, "Assuming Write Enabled\n");
2274 if (sdp->use_192_bytes_for_3f) {
2275 res = sd_do_mode_sense(sdp, 0, 0x3F, buffer, 192, &data, NULL);
2278 * First attempt: ask for all pages (0x3F), but only 4 bytes.
2279 * We have to start carefully: some devices hang if we ask
2280 * for more than is available.
2282 res = sd_do_mode_sense(sdp, 0, 0x3F, buffer, 4, &data, NULL);
2285 * Second attempt: ask for page 0 When only page 0 is
2286 * implemented, a request for page 3F may return Sense Key
2287 * 5: Illegal Request, Sense Code 24: Invalid field in
2290 if (!scsi_status_is_good(res))
2291 res = sd_do_mode_sense(sdp, 0, 0, buffer, 4, &data, NULL);
2294 * Third attempt: ask 255 bytes, as we did earlier.
2296 if (!scsi_status_is_good(res))
2297 res = sd_do_mode_sense(sdp, 0, 0x3F, buffer, 255,
2301 if (!scsi_status_is_good(res)) {
2302 sd_first_printk(KERN_WARNING, sdkp,
2303 "Test WP failed, assume Write Enabled\n");
2305 sdkp->write_prot = ((data.device_specific & 0x80) != 0);
2306 set_disk_ro(sdkp->disk, sdkp->write_prot);
2307 if (sdkp->first_scan || old_wp != sdkp->write_prot) {
2308 sd_printk(KERN_NOTICE, sdkp, "Write Protect is %s\n",
2309 sdkp->write_prot ? "on" : "off");
2310 sd_printk(KERN_DEBUG, sdkp,
2311 "Mode Sense: %02x %02x %02x %02x\n",
2312 buffer[0], buffer[1], buffer[2], buffer[3]);
2318 * sd_read_cache_type - called only from sd_revalidate_disk()
2319 * called with buffer of length SD_BUF_SIZE
2322 sd_read_cache_type(struct scsi_disk *sdkp, unsigned char *buffer)
2325 struct scsi_device *sdp = sdkp->device;
2330 struct scsi_mode_data data;
2331 struct scsi_sense_hdr sshdr;
2332 int old_wce = sdkp->WCE;
2333 int old_rcd = sdkp->RCD;
2334 int old_dpofua = sdkp->DPOFUA;
2337 if (sdkp->cache_override)
2341 if (sdp->skip_ms_page_8) {
2342 if (sdp->type == TYPE_RBC)
2345 if (sdp->skip_ms_page_3f)
2348 if (sdp->use_192_bytes_for_3f)
2352 } else if (sdp->type == TYPE_RBC) {
2360 /* cautiously ask */
2361 res = sd_do_mode_sense(sdp, dbd, modepage, buffer, first_len,
2364 if (!scsi_status_is_good(res))
2367 if (!data.header_length) {
2370 sd_first_printk(KERN_ERR, sdkp,
2371 "Missing header in MODE_SENSE response\n");
2374 /* that went OK, now ask for the proper length */
2378 * We're only interested in the first three bytes, actually.
2379 * But the data cache page is defined for the first 20.
2383 else if (len > SD_BUF_SIZE) {
2384 sd_first_printk(KERN_NOTICE, sdkp, "Truncating mode parameter "
2385 "data from %d to %d bytes\n", len, SD_BUF_SIZE);
2388 if (modepage == 0x3F && sdp->use_192_bytes_for_3f)
2392 if (len > first_len)
2393 res = sd_do_mode_sense(sdp, dbd, modepage, buffer, len,
2396 if (scsi_status_is_good(res)) {
2397 int offset = data.header_length + data.block_descriptor_length;
2399 while (offset < len) {
2400 u8 page_code = buffer[offset] & 0x3F;
2401 u8 spf = buffer[offset] & 0x40;
2403 if (page_code == 8 || page_code == 6) {
2404 /* We're interested only in the first 3 bytes.
2406 if (len - offset <= 2) {
2407 sd_first_printk(KERN_ERR, sdkp,
2408 "Incomplete mode parameter "
2412 modepage = page_code;
2416 /* Go to the next page */
2417 if (spf && len - offset > 3)
2418 offset += 4 + (buffer[offset+2] << 8) +
2420 else if (!spf && len - offset > 1)
2421 offset += 2 + buffer[offset+1];
2423 sd_first_printk(KERN_ERR, sdkp,
2425 "parameter data\n");
2431 sd_first_printk(KERN_ERR, sdkp, "No Caching mode page found\n");
2435 if (modepage == 8) {
2436 sdkp->WCE = ((buffer[offset + 2] & 0x04) != 0);
2437 sdkp->RCD = ((buffer[offset + 2] & 0x01) != 0);
2439 sdkp->WCE = ((buffer[offset + 2] & 0x01) == 0);
2443 sdkp->DPOFUA = (data.device_specific & 0x10) != 0;
2444 if (sdp->broken_fua) {
2445 sd_first_printk(KERN_NOTICE, sdkp, "Disabling FUA\n");
2447 } else if (sdkp->DPOFUA && !sdkp->device->use_10_for_rw) {
2448 sd_first_printk(KERN_NOTICE, sdkp,
2449 "Uses READ/WRITE(6), disabling FUA\n");
2453 if (sdkp->first_scan || old_wce != sdkp->WCE ||
2454 old_rcd != sdkp->RCD || old_dpofua != sdkp->DPOFUA)
2455 sd_printk(KERN_NOTICE, sdkp,
2456 "Write cache: %s, read cache: %s, %s\n",
2457 sdkp->WCE ? "enabled" : "disabled",
2458 sdkp->RCD ? "disabled" : "enabled",
2459 sdkp->DPOFUA ? "supports DPO and FUA"
2460 : "doesn't support DPO or FUA");
2466 if (scsi_sense_valid(&sshdr) &&
2467 sshdr.sense_key == ILLEGAL_REQUEST &&
2468 sshdr.asc == 0x24 && sshdr.ascq == 0x0)
2469 /* Invalid field in CDB */
2470 sd_first_printk(KERN_NOTICE, sdkp, "Cache data unavailable\n");
2472 sd_first_printk(KERN_ERR, sdkp,
2473 "Asking for cache data failed\n");
2476 if (sdp->wce_default_on) {
2477 sd_first_printk(KERN_NOTICE, sdkp,
2478 "Assuming drive cache: write back\n");
2481 sd_first_printk(KERN_ERR, sdkp,
2482 "Assuming drive cache: write through\n");
2490 * The ATO bit indicates whether the DIF application tag is available
2491 * for use by the operating system.
2493 static void sd_read_app_tag_own(struct scsi_disk *sdkp, unsigned char *buffer)
2496 struct scsi_device *sdp = sdkp->device;
2497 struct scsi_mode_data data;
2498 struct scsi_sense_hdr sshdr;
2500 if (sdp->type != TYPE_DISK)
2503 if (sdkp->protection_type == 0)
2506 res = scsi_mode_sense(sdp, 1, 0x0a, buffer, 36, SD_TIMEOUT,
2507 SD_MAX_RETRIES, &data, &sshdr);
2509 if (!scsi_status_is_good(res) || !data.header_length ||
2511 sd_first_printk(KERN_WARNING, sdkp,
2512 "getting Control mode page failed, assume no ATO\n");
2514 if (scsi_sense_valid(&sshdr))
2515 sd_print_sense_hdr(sdkp, &sshdr);
2520 offset = data.header_length + data.block_descriptor_length;
2522 if ((buffer[offset] & 0x3f) != 0x0a) {
2523 sd_first_printk(KERN_ERR, sdkp, "ATO Got wrong page\n");
2527 if ((buffer[offset + 5] & 0x80) == 0)
2536 * sd_read_block_limits - Query disk device for preferred I/O sizes.
2537 * @disk: disk to query
2539 static void sd_read_block_limits(struct scsi_disk *sdkp)
2541 unsigned int sector_sz = sdkp->device->sector_size;
2542 const int vpd_len = 64;
2543 unsigned char *buffer = kmalloc(vpd_len, GFP_KERNEL);
2546 /* Block Limits VPD */
2547 scsi_get_vpd_page(sdkp->device, 0xb0, buffer, vpd_len))
2550 blk_queue_io_min(sdkp->disk->queue,
2551 get_unaligned_be16(&buffer[6]) * sector_sz);
2552 blk_queue_io_opt(sdkp->disk->queue,
2553 get_unaligned_be32(&buffer[12]) * sector_sz);
2555 if (buffer[3] == 0x3c) {
2556 unsigned int lba_count, desc_count;
2558 sdkp->max_ws_blocks = (u32)get_unaligned_be64(&buffer[36]);
2563 lba_count = get_unaligned_be32(&buffer[20]);
2564 desc_count = get_unaligned_be32(&buffer[24]);
2566 if (lba_count && desc_count)
2567 sdkp->max_unmap_blocks = lba_count;
2569 sdkp->unmap_granularity = get_unaligned_be32(&buffer[28]);
2571 if (buffer[32] & 0x80)
2572 sdkp->unmap_alignment =
2573 get_unaligned_be32(&buffer[32]) & ~(1 << 31);
2575 if (!sdkp->lbpvpd) { /* LBP VPD page not provided */
2577 if (sdkp->max_unmap_blocks)
2578 sd_config_discard(sdkp, SD_LBP_UNMAP);
2580 sd_config_discard(sdkp, SD_LBP_WS16);
2582 } else { /* LBP VPD page tells us what to use */
2584 if (sdkp->lbpu && sdkp->max_unmap_blocks)
2585 sd_config_discard(sdkp, SD_LBP_UNMAP);
2586 else if (sdkp->lbpws)
2587 sd_config_discard(sdkp, SD_LBP_WS16);
2588 else if (sdkp->lbpws10)
2589 sd_config_discard(sdkp, SD_LBP_WS10);
2591 sd_config_discard(sdkp, SD_LBP_DISABLE);
2600 * sd_read_block_characteristics - Query block dev. characteristics
2601 * @disk: disk to query
2603 static void sd_read_block_characteristics(struct scsi_disk *sdkp)
2605 unsigned char *buffer;
2607 const int vpd_len = 64;
2609 buffer = kmalloc(vpd_len, GFP_KERNEL);
2612 /* Block Device Characteristics VPD */
2613 scsi_get_vpd_page(sdkp->device, 0xb1, buffer, vpd_len))
2616 rot = get_unaligned_be16(&buffer[4]);
2619 queue_flag_set_unlocked(QUEUE_FLAG_NONROT, sdkp->disk->queue);
2626 * sd_read_block_provisioning - Query provisioning VPD page
2627 * @disk: disk to query
2629 static void sd_read_block_provisioning(struct scsi_disk *sdkp)
2631 unsigned char *buffer;
2632 const int vpd_len = 8;
2634 if (sdkp->lbpme == 0)
2637 buffer = kmalloc(vpd_len, GFP_KERNEL);
2639 if (!buffer || scsi_get_vpd_page(sdkp->device, 0xb2, buffer, vpd_len))
2643 sdkp->lbpu = (buffer[5] >> 7) & 1; /* UNMAP */
2644 sdkp->lbpws = (buffer[5] >> 6) & 1; /* WRITE SAME(16) with UNMAP */
2645 sdkp->lbpws10 = (buffer[5] >> 5) & 1; /* WRITE SAME(10) with UNMAP */
2651 static void sd_read_write_same(struct scsi_disk *sdkp, unsigned char *buffer)
2653 struct scsi_device *sdev = sdkp->device;
2655 if (sdev->host->no_write_same) {
2656 sdev->no_write_same = 1;
2661 if (scsi_report_opcode(sdev, buffer, SD_BUF_SIZE, INQUIRY) < 0) {
2662 /* too large values might cause issues with arcmsr */
2663 int vpd_buf_len = 64;
2665 sdev->no_report_opcodes = 1;
2667 /* Disable WRITE SAME if REPORT SUPPORTED OPERATION
2668 * CODES is unsupported and the device has an ATA
2669 * Information VPD page (SAT).
2671 if (!scsi_get_vpd_page(sdev, 0x89, buffer, vpd_buf_len))
2672 sdev->no_write_same = 1;
2675 if (scsi_report_opcode(sdev, buffer, SD_BUF_SIZE, WRITE_SAME_16) == 1)
2678 if (scsi_report_opcode(sdev, buffer, SD_BUF_SIZE, WRITE_SAME) == 1)
2682 static int sd_try_extended_inquiry(struct scsi_device *sdp)
2685 * Although VPD inquiries can go to SCSI-2 type devices,
2686 * some USB ones crash on receiving them, and the pages
2687 * we currently ask for are for SPC-3 and beyond
2689 if (sdp->scsi_level > SCSI_SPC_2 && !sdp->skip_vpd_pages)
2695 * sd_revalidate_disk - called the first time a new disk is seen,
2696 * performs disk spin up, read_capacity, etc.
2697 * @disk: struct gendisk we care about
2699 static int sd_revalidate_disk(struct gendisk *disk)
2701 struct scsi_disk *sdkp = scsi_disk(disk);
2702 struct scsi_device *sdp = sdkp->device;
2703 unsigned char *buffer;
2706 SCSI_LOG_HLQUEUE(3, sd_printk(KERN_INFO, sdkp,
2707 "sd_revalidate_disk\n"));
2710 * If the device is offline, don't try and read capacity or any
2711 * of the other niceties.
2713 if (!scsi_device_online(sdp))
2716 buffer = kmalloc(SD_BUF_SIZE, GFP_KERNEL);
2718 sd_printk(KERN_WARNING, sdkp, "sd_revalidate_disk: Memory "
2719 "allocation failure.\n");
2723 sd_spinup_disk(sdkp);
2726 * Without media there is no reason to ask; moreover, some devices
2727 * react badly if we do.
2729 if (sdkp->media_present) {
2730 sd_read_capacity(sdkp, buffer);
2732 if (sd_try_extended_inquiry(sdp)) {
2733 sd_read_block_provisioning(sdkp);
2734 sd_read_block_limits(sdkp);
2735 sd_read_block_characteristics(sdkp);
2738 sd_read_write_protect_flag(sdkp, buffer);
2739 sd_read_cache_type(sdkp, buffer);
2740 sd_read_app_tag_own(sdkp, buffer);
2741 sd_read_write_same(sdkp, buffer);
2744 sdkp->first_scan = 0;
2747 * We now have all cache related info, determine how we deal
2748 * with flush requests.
2756 blk_queue_flush(sdkp->disk->queue, flush);
2758 set_capacity(disk, sdkp->capacity);
2759 sd_config_write_same(sdkp);
2767 * sd_unlock_native_capacity - unlock native capacity
2768 * @disk: struct gendisk to set capacity for
2770 * Block layer calls this function if it detects that partitions
2771 * on @disk reach beyond the end of the device. If the SCSI host
2772 * implements ->unlock_native_capacity() method, it's invoked to
2773 * give it a chance to adjust the device capacity.
2776 * Defined by block layer. Might sleep.
2778 static void sd_unlock_native_capacity(struct gendisk *disk)
2780 struct scsi_device *sdev = scsi_disk(disk)->device;
2782 if (sdev->host->hostt->unlock_native_capacity)
2783 sdev->host->hostt->unlock_native_capacity(sdev);
2787 * sd_format_disk_name - format disk name
2788 * @prefix: name prefix - ie. "sd" for SCSI disks
2789 * @index: index of the disk to format name for
2790 * @buf: output buffer
2791 * @buflen: length of the output buffer
2793 * SCSI disk names starts at sda. The 26th device is sdz and the
2794 * 27th is sdaa. The last one for two lettered suffix is sdzz
2795 * which is followed by sdaaa.
2797 * This is basically 26 base counting with one extra 'nil' entry
2798 * at the beginning from the second digit on and can be
2799 * determined using similar method as 26 base conversion with the
2800 * index shifted -1 after each digit is computed.
2806 * 0 on success, -errno on failure.
2808 static int sd_format_disk_name(char *prefix, int index, char *buf, int buflen)
2810 const int base = 'z' - 'a' + 1;
2811 char *begin = buf + strlen(prefix);
2812 char *end = buf + buflen;
2822 *--p = 'a' + (index % unit);
2823 index = (index / unit) - 1;
2824 } while (index >= 0);
2826 memmove(begin, p, end - p);
2827 memcpy(buf, prefix, strlen(prefix));
2833 * The asynchronous part of sd_probe
2835 static void sd_probe_async(void *data, async_cookie_t cookie)
2837 struct scsi_disk *sdkp = data;
2838 struct scsi_device *sdp;
2845 index = sdkp->index;
2846 dev = &sdp->sdev_gendev;
2848 gd->major = sd_major((index & 0xf0) >> 4);
2849 gd->first_minor = ((index & 0xf) << 4) | (index & 0xfff00);
2850 gd->minors = SD_MINORS;
2852 gd->fops = &sd_fops;
2853 gd->private_data = &sdkp->driver;
2854 gd->queue = sdkp->device->request_queue;
2856 /* defaults, until the device tells us otherwise */
2857 sdp->sector_size = 512;
2859 sdkp->media_present = 1;
2860 sdkp->write_prot = 0;
2861 sdkp->cache_override = 0;
2865 sdkp->first_scan = 1;
2866 sdkp->max_medium_access_timeouts = SD_MAX_MEDIUM_TIMEOUTS;
2868 sd_revalidate_disk(gd);
2870 gd->driverfs_dev = &sdp->sdev_gendev;
2871 gd->flags = GENHD_FL_EXT_DEVT;
2872 if (sdp->removable) {
2873 gd->flags |= GENHD_FL_REMOVABLE;
2874 gd->events |= DISK_EVENT_MEDIA_CHANGE;
2877 blk_pm_runtime_init(sdp->request_queue, dev);
2880 sd_dif_config_host(sdkp);
2882 sd_revalidate_disk(gd);
2884 sd_printk(KERN_NOTICE, sdkp, "Attached SCSI %sdisk\n",
2885 sdp->removable ? "removable " : "");
2886 scsi_autopm_put_device(sdp);
2887 put_device(&sdkp->dev);
2891 * sd_probe - called during driver initialization and whenever a
2892 * new scsi device is attached to the system. It is called once
2893 * for each scsi device (not just disks) present.
2894 * @dev: pointer to device object
2896 * Returns 0 if successful (or not interested in this scsi device
2897 * (e.g. scanner)); 1 when there is an error.
2899 * Note: this function is invoked from the scsi mid-level.
2900 * This function sets up the mapping between a given
2901 * <host,channel,id,lun> (found in sdp) and new device name
2902 * (e.g. /dev/sda). More precisely it is the block device major
2903 * and minor number that is chosen here.
2905 * Assume sd_probe is not re-entrant (for time being)
2906 * Also think about sd_probe() and sd_remove() running coincidentally.
2908 static int sd_probe(struct device *dev)
2910 struct scsi_device *sdp = to_scsi_device(dev);
2911 struct scsi_disk *sdkp;
2917 if (sdp->type != TYPE_DISK && sdp->type != TYPE_MOD && sdp->type != TYPE_RBC)
2920 SCSI_LOG_HLQUEUE(3, sdev_printk(KERN_INFO, sdp,
2924 sdkp = kzalloc(sizeof(*sdkp), GFP_KERNEL);
2928 gd = alloc_disk(SD_MINORS);
2933 if (!ida_pre_get(&sd_index_ida, GFP_KERNEL))
2936 spin_lock(&sd_index_lock);
2937 error = ida_get_new(&sd_index_ida, &index);
2938 spin_unlock(&sd_index_lock);
2939 } while (error == -EAGAIN);
2942 sdev_printk(KERN_WARNING, sdp, "sd_probe: memory exhausted.\n");
2946 error = sd_format_disk_name("sd", index, gd->disk_name, DISK_NAME_LEN);
2948 sdev_printk(KERN_WARNING, sdp, "SCSI disk (sd) name length exceeded.\n");
2949 goto out_free_index;
2953 sdkp->driver = &sd_template;
2955 sdkp->index = index;
2956 atomic_set(&sdkp->openers, 0);
2957 atomic_set(&sdkp->device->ioerr_cnt, 0);
2959 if (!sdp->request_queue->rq_timeout) {
2960 if (sdp->type != TYPE_MOD)
2961 blk_queue_rq_timeout(sdp->request_queue, SD_TIMEOUT);
2963 blk_queue_rq_timeout(sdp->request_queue,
2967 device_initialize(&sdkp->dev);
2968 sdkp->dev.parent = dev;
2969 sdkp->dev.class = &sd_disk_class;
2970 dev_set_name(&sdkp->dev, "%s", dev_name(dev));
2972 if (device_add(&sdkp->dev))
2973 goto out_free_index;
2976 dev_set_drvdata(dev, sdkp);
2978 get_device(&sdkp->dev); /* prevent release before async_schedule */
2979 async_schedule_domain(sd_probe_async, sdkp, &scsi_sd_probe_domain);
2984 spin_lock(&sd_index_lock);
2985 ida_remove(&sd_index_ida, index);
2986 spin_unlock(&sd_index_lock);
2996 * sd_remove - called whenever a scsi disk (previously recognized by
2997 * sd_probe) is detached from the system. It is called (potentially
2998 * multiple times) during sd module unload.
2999 * @sdp: pointer to mid level scsi device object
3001 * Note: this function is invoked from the scsi mid-level.
3002 * This function potentially frees up a device name (e.g. /dev/sdc)
3003 * that could be re-used by a subsequent sd_probe().
3004 * This function is not called when the built-in sd driver is "exit-ed".
3006 static int sd_remove(struct device *dev)
3008 struct scsi_disk *sdkp;
3011 sdkp = dev_get_drvdata(dev);
3012 devt = disk_devt(sdkp->disk);
3013 scsi_autopm_get_device(sdkp->device);
3015 async_synchronize_full_domain(&scsi_sd_pm_domain);
3016 async_synchronize_full_domain(&scsi_sd_probe_domain);
3017 device_del(&sdkp->dev);
3018 del_gendisk(sdkp->disk);
3021 blk_register_region(devt, SD_MINORS, NULL,
3022 sd_default_probe, NULL, NULL);
3024 mutex_lock(&sd_ref_mutex);
3025 dev_set_drvdata(dev, NULL);
3026 put_device(&sdkp->dev);
3027 mutex_unlock(&sd_ref_mutex);
3033 * scsi_disk_release - Called to free the scsi_disk structure
3034 * @dev: pointer to embedded class device
3036 * sd_ref_mutex must be held entering this routine. Because it is
3037 * called on last put, you should always use the scsi_disk_get()
3038 * scsi_disk_put() helpers which manipulate the semaphore directly
3039 * and never do a direct put_device.
3041 static void scsi_disk_release(struct device *dev)
3043 struct scsi_disk *sdkp = to_scsi_disk(dev);
3044 struct gendisk *disk = sdkp->disk;
3046 spin_lock(&sd_index_lock);
3047 ida_remove(&sd_index_ida, sdkp->index);
3048 spin_unlock(&sd_index_lock);
3050 disk->private_data = NULL;
3052 put_device(&sdkp->device->sdev_gendev);
3057 static int sd_start_stop_device(struct scsi_disk *sdkp, int start)
3059 unsigned char cmd[6] = { START_STOP }; /* START_VALID */
3060 struct scsi_sense_hdr sshdr;
3061 struct scsi_device *sdp = sdkp->device;
3065 cmd[4] |= 1; /* START */
3067 if (sdp->start_stop_pwr_cond)
3068 cmd[4] |= start ? 1 << 4 : 3 << 4; /* Active or Standby */
3070 if (!scsi_device_online(sdp))
3073 res = scsi_execute_req_flags(sdp, cmd, DMA_NONE, NULL, 0, &sshdr,
3074 SD_TIMEOUT, SD_MAX_RETRIES, NULL, REQ_PM);
3076 sd_printk(KERN_WARNING, sdkp, "START_STOP FAILED\n");
3077 sd_print_result(sdkp, res);
3078 if (driver_byte(res) & DRIVER_SENSE)
3079 sd_print_sense_hdr(sdkp, &sshdr);
3080 if (scsi_sense_valid(&sshdr) &&
3081 /* 0x3a is medium not present */
3086 /* SCSI error codes must not go to the generic layer */
3094 * Send a SYNCHRONIZE CACHE instruction down to the device through
3095 * the normal SCSI command structure. Wait for the command to
3098 static void sd_shutdown(struct device *dev)
3100 struct scsi_disk *sdkp = scsi_disk_get_from_dev(dev);
3103 return; /* this can happen */
3105 if (pm_runtime_suspended(dev))
3108 if (sdkp->WCE && sdkp->media_present) {
3109 sd_printk(KERN_NOTICE, sdkp, "Synchronizing SCSI cache\n");
3110 sd_sync_cache(sdkp);
3113 if (system_state != SYSTEM_RESTART && sdkp->device->manage_start_stop) {
3114 sd_printk(KERN_NOTICE, sdkp, "Stopping disk\n");
3115 sd_start_stop_device(sdkp, 0);
3119 scsi_disk_put(sdkp);
3122 static int sd_suspend_common(struct device *dev, bool ignore_stop_errors)
3124 struct scsi_disk *sdkp = scsi_disk_get_from_dev(dev);
3128 return 0; /* this can happen */
3130 if (sdkp->WCE && sdkp->media_present) {
3131 sd_printk(KERN_NOTICE, sdkp, "Synchronizing SCSI cache\n");
3132 ret = sd_sync_cache(sdkp);
3134 /* ignore OFFLINE device */
3141 if (sdkp->device->manage_start_stop) {
3142 sd_printk(KERN_NOTICE, sdkp, "Stopping disk\n");
3143 /* an error is not worth aborting a system sleep */
3144 ret = sd_start_stop_device(sdkp, 0);
3145 if (ignore_stop_errors)
3150 scsi_disk_put(sdkp);
3154 static int sd_suspend_system(struct device *dev)
3156 return sd_suspend_common(dev, true);
3159 static int sd_suspend_runtime(struct device *dev)
3161 return sd_suspend_common(dev, false);
3164 static int sd_resume(struct device *dev)
3166 struct scsi_disk *sdkp = scsi_disk_get_from_dev(dev);
3169 if (!sdkp->device->manage_start_stop)
3172 sd_printk(KERN_NOTICE, sdkp, "Starting disk\n");
3173 ret = sd_start_stop_device(sdkp, 1);
3176 scsi_disk_put(sdkp);
3181 * init_sd - entry point for this driver (both when built in or when
3184 * Note: this function registers this driver with the scsi mid-level.
3186 static int __init init_sd(void)
3188 int majors = 0, i, err;
3190 SCSI_LOG_HLQUEUE(3, printk("init_sd: sd driver entry point\n"));
3192 for (i = 0; i < SD_MAJORS; i++) {
3193 if (register_blkdev(sd_major(i), "sd") != 0)
3196 blk_register_region(sd_major(i), SD_MINORS, NULL,
3197 sd_default_probe, NULL, NULL);
3203 err = class_register(&sd_disk_class);
3207 sd_cdb_cache = kmem_cache_create("sd_ext_cdb", SD_EXT_CDB_SIZE,
3209 if (!sd_cdb_cache) {
3210 printk(KERN_ERR "sd: can't init extended cdb cache\n");
3214 sd_cdb_pool = mempool_create_slab_pool(SD_MEMPOOL_SIZE, sd_cdb_cache);
3216 printk(KERN_ERR "sd: can't init extended cdb pool\n");
3220 err = scsi_register_driver(&sd_template.gendrv);
3222 goto err_out_driver;
3227 mempool_destroy(sd_cdb_pool);
3230 kmem_cache_destroy(sd_cdb_cache);
3233 class_unregister(&sd_disk_class);
3235 for (i = 0; i < SD_MAJORS; i++)
3236 unregister_blkdev(sd_major(i), "sd");
3241 * exit_sd - exit point for this driver (when it is a module).
3243 * Note: this function unregisters this driver from the scsi mid-level.
3245 static void __exit exit_sd(void)
3249 SCSI_LOG_HLQUEUE(3, printk("exit_sd: exiting sd driver\n"));
3251 scsi_unregister_driver(&sd_template.gendrv);
3252 mempool_destroy(sd_cdb_pool);
3253 kmem_cache_destroy(sd_cdb_cache);
3255 class_unregister(&sd_disk_class);
3257 for (i = 0; i < SD_MAJORS; i++) {
3258 blk_unregister_region(sd_major(i), SD_MINORS);
3259 unregister_blkdev(sd_major(i), "sd");
3263 module_init(init_sd);
3264 module_exit(exit_sd);
3266 static void sd_print_sense_hdr(struct scsi_disk *sdkp,
3267 struct scsi_sense_hdr *sshdr)
3269 sd_printk(KERN_INFO, sdkp, " ");
3270 scsi_show_sense_hdr(sshdr);
3271 sd_printk(KERN_INFO, sdkp, " ");
3272 scsi_show_extd_sense(sshdr->asc, sshdr->ascq);
3275 static void sd_print_result(struct scsi_disk *sdkp, int result)
3277 sd_printk(KERN_INFO, sdkp, " ");
3278 scsi_show_result(result);