2 * Driver for IDT Versaclock 5
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License as published by
8 * the Free Software Foundation; either version 2 of the License, or
9 * (at your option) any later version.
11 * This program is distributed in the hope that it will be useful,
12 * but WITHOUT ANY WARRANTY; without even the implied warranty of
13 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
14 * GNU General Public License for more details.
18 * Possible optimizations:
19 * - Use spread spectrum
20 * - Use integer divider in FOD if applicable
23 #include <linux/clk.h>
24 #include <linux/clk-provider.h>
25 #include <linux/delay.h>
26 #include <linux/i2c.h>
27 #include <linux/interrupt.h>
28 #include <linux/mod_devicetable.h>
29 #include <linux/module.h>
31 #include <linux/of_platform.h>
32 #include <linux/rational.h>
33 #include <linux/regmap.h>
34 #include <linux/slab.h>
36 /* VersaClock5 registers */
37 #define VC5_OTP_CONTROL 0x00
39 /* Factory-reserved register block */
40 #define VC5_RSVD_DEVICE_ID 0x01
41 #define VC5_RSVD_ADC_GAIN_7_0 0x02
42 #define VC5_RSVD_ADC_GAIN_15_8 0x03
43 #define VC5_RSVD_ADC_OFFSET_7_0 0x04
44 #define VC5_RSVD_ADC_OFFSET_15_8 0x05
45 #define VC5_RSVD_TEMPY 0x06
46 #define VC5_RSVD_OFFSET_TBIN 0x07
47 #define VC5_RSVD_GAIN 0x08
48 #define VC5_RSVD_TEST_NP 0x09
49 #define VC5_RSVD_UNUSED 0x0a
50 #define VC5_RSVD_BANDGAP_TRIM_UP 0x0b
51 #define VC5_RSVD_BANDGAP_TRIM_DN 0x0c
52 #define VC5_RSVD_CLK_R_12_CLK_AMP_4 0x0d
53 #define VC5_RSVD_CLK_R_34_CLK_AMP_4 0x0e
54 #define VC5_RSVD_CLK_AMP_123 0x0f
56 /* Configuration register block */
57 #define VC5_PRIM_SRC_SHDN 0x10
58 #define VC5_PRIM_SRC_SHDN_EN_XTAL BIT(7)
59 #define VC5_PRIM_SRC_SHDN_EN_CLKIN BIT(6)
60 #define VC5_PRIM_SRC_SHDN_SP BIT(1)
61 #define VC5_PRIM_SRC_SHDN_EN_GBL_SHDN BIT(0)
63 #define VC5_VCO_BAND 0x11
64 #define VC5_XTAL_X1_LOAD_CAP 0x12
65 #define VC5_XTAL_X2_LOAD_CAP 0x13
66 #define VC5_REF_DIVIDER 0x15
67 #define VC5_REF_DIVIDER_SEL_PREDIV2 BIT(7)
68 #define VC5_REF_DIVIDER_REF_DIV(n) ((n) & 0x3f)
70 #define VC5_VCO_CTRL_AND_PREDIV 0x16
71 #define VC5_VCO_CTRL_AND_PREDIV_BYPASS_PREDIV BIT(7)
73 #define VC5_FEEDBACK_INT_DIV 0x17
74 #define VC5_FEEDBACK_INT_DIV_BITS 0x18
75 #define VC5_FEEDBACK_FRAC_DIV(n) (0x19 + (n))
76 #define VC5_RC_CONTROL0 0x1e
77 #define VC5_RC_CONTROL1 0x1f
78 /* Register 0x20 is factory reserved */
80 /* Output divider control for divider 1,2,3,4 */
81 #define VC5_OUT_DIV_CONTROL(idx) (0x21 + ((idx) * 0x10))
82 #define VC5_OUT_DIV_CONTROL_RESET BIT(7)
83 #define VC5_OUT_DIV_CONTROL_SELB_NORM BIT(3)
84 #define VC5_OUT_DIV_CONTROL_SEL_EXT BIT(2)
85 #define VC5_OUT_DIV_CONTROL_INT_MODE BIT(1)
86 #define VC5_OUT_DIV_CONTROL_EN_FOD BIT(0)
88 #define VC5_OUT_DIV_FRAC(idx, n) (0x22 + ((idx) * 0x10) + (n))
89 #define VC5_OUT_DIV_FRAC4_OD_SCEE BIT(1)
91 #define VC5_OUT_DIV_STEP_SPREAD(idx, n) (0x26 + ((idx) * 0x10) + (n))
92 #define VC5_OUT_DIV_SPREAD_MOD(idx, n) (0x29 + ((idx) * 0x10) + (n))
93 #define VC5_OUT_DIV_SKEW_INT(idx, n) (0x2b + ((idx) * 0x10) + (n))
94 #define VC5_OUT_DIV_INT(idx, n) (0x2d + ((idx) * 0x10) + (n))
95 #define VC5_OUT_DIV_SKEW_FRAC(idx) (0x2f + ((idx) * 0x10))
96 /* Registers 0x30, 0x40, 0x50 are factory reserved */
98 /* Clock control register for clock 1,2 */
99 #define VC5_CLK_OUTPUT_CFG(idx, n) (0x60 + ((idx) * 0x2) + (n))
100 #define VC5_CLK_OUTPUT_CFG1_EN_CLKBUF BIT(0)
102 #define VC5_CLK_OE_SHDN 0x68
103 #define VC5_CLK_OS_SHDN 0x69
105 #define VC5_GLOBAL_REGISTER 0x76
106 #define VC5_GLOBAL_REGISTER_GLOBAL_RESET BIT(5)
108 /* PLL/VCO runs between 2.5 GHz and 3.0 GHz */
109 #define VC5_PLL_VCO_MIN 2500000000UL
110 #define VC5_PLL_VCO_MAX 3000000000UL
112 /* VC5 Input mux settings */
113 #define VC5_MUX_IN_XIN BIT(0)
114 #define VC5_MUX_IN_CLKIN BIT(1)
116 /* Supported IDT VC5 models. */
122 struct vc5_driver_data;
126 struct vc5_driver_data *vc5;
132 struct vc5_driver_data {
133 struct i2c_client *client;
134 struct regmap *regmap;
135 enum vc5_model model;
138 struct clk *pin_clkin;
139 unsigned char clk_mux_ins;
140 struct clk_hw clk_mux;
141 struct vc5_hw_data clk_pll;
142 struct vc5_hw_data clk_fod[2];
143 struct vc5_hw_data clk_out[3];
146 static const char * const vc5_mux_names[] = {
150 static const char * const vc5_pll_names[] = {
154 static const char * const vc5_fod_names[] = {
155 "fod0", "fod1", "fod2", "fod3",
158 static const char * const vc5_clk_out_names[] = {
159 "out0_sel_i2cb", "out1", "out2", "out3", "out4",
163 * VersaClock5 i2c regmap
165 static bool vc5_regmap_is_writeable(struct device *dev, unsigned int reg)
167 /* Factory reserved regs, make them read-only */
171 /* Factory reserved regs, make them read-only */
172 if (reg == 0x14 || reg == 0x1c || reg == 0x1d)
178 static const struct regmap_config vc5_regmap_config = {
181 .cache_type = REGCACHE_RBTREE,
182 .max_register = 0x76,
183 .writeable_reg = vc5_regmap_is_writeable,
187 * VersaClock5 input multiplexer between XTAL and CLKIN divider
189 static unsigned char vc5_mux_get_parent(struct clk_hw *hw)
191 struct vc5_driver_data *vc5 =
192 container_of(hw, struct vc5_driver_data, clk_mux);
193 const u8 mask = VC5_PRIM_SRC_SHDN_EN_XTAL | VC5_PRIM_SRC_SHDN_EN_CLKIN;
196 regmap_read(vc5->regmap, VC5_PRIM_SRC_SHDN, &src);
199 if (src == VC5_PRIM_SRC_SHDN_EN_XTAL)
202 if (src == VC5_PRIM_SRC_SHDN_EN_CLKIN)
205 dev_warn(&vc5->client->dev,
206 "Invalid clock input configuration (%02x)\n", src);
210 static int vc5_mux_set_parent(struct clk_hw *hw, u8 index)
212 struct vc5_driver_data *vc5 =
213 container_of(hw, struct vc5_driver_data, clk_mux);
214 const u8 mask = VC5_PRIM_SRC_SHDN_EN_XTAL | VC5_PRIM_SRC_SHDN_EN_CLKIN;
217 if ((index > 1) || !vc5->clk_mux_ins)
220 if (vc5->clk_mux_ins == (VC5_MUX_IN_CLKIN | VC5_MUX_IN_XIN)) {
222 src = VC5_PRIM_SRC_SHDN_EN_XTAL;
224 src = VC5_PRIM_SRC_SHDN_EN_CLKIN;
229 if (vc5->clk_mux_ins == VC5_MUX_IN_XIN)
230 src = VC5_PRIM_SRC_SHDN_EN_XTAL;
231 if (vc5->clk_mux_ins == VC5_MUX_IN_CLKIN)
232 src = VC5_PRIM_SRC_SHDN_EN_CLKIN;
235 return regmap_update_bits(vc5->regmap, VC5_PRIM_SRC_SHDN, mask, src);
238 static unsigned long vc5_mux_recalc_rate(struct clk_hw *hw,
239 unsigned long parent_rate)
241 struct vc5_driver_data *vc5 =
242 container_of(hw, struct vc5_driver_data, clk_mux);
243 unsigned int prediv, div;
245 regmap_read(vc5->regmap, VC5_VCO_CTRL_AND_PREDIV, &prediv);
247 /* The bypass_prediv is set, PLL fed from Ref_in directly. */
248 if (prediv & VC5_VCO_CTRL_AND_PREDIV_BYPASS_PREDIV)
251 regmap_read(vc5->regmap, VC5_REF_DIVIDER, &div);
253 /* The Sel_prediv2 is set, PLL fed from prediv2 (Ref_in / 2) */
254 if (div & VC5_REF_DIVIDER_SEL_PREDIV2)
255 return parent_rate / 2;
257 return parent_rate / VC5_REF_DIVIDER_REF_DIV(div);
260 static long vc5_mux_round_rate(struct clk_hw *hw, unsigned long rate,
261 unsigned long *parent_rate)
265 /* PLL cannot operate with input clock above 50 MHz. */
269 /* CLKIN within range of PLL input, feed directly to PLL. */
270 if (*parent_rate <= 50000000)
273 idiv = DIV_ROUND_UP(*parent_rate, rate);
277 return *parent_rate / idiv;
280 static int vc5_mux_set_rate(struct clk_hw *hw, unsigned long rate,
281 unsigned long parent_rate)
283 struct vc5_driver_data *vc5 =
284 container_of(hw, struct vc5_driver_data, clk_mux);
288 /* CLKIN within range of PLL input, feed directly to PLL. */
289 if (parent_rate <= 50000000) {
290 regmap_update_bits(vc5->regmap, VC5_VCO_CTRL_AND_PREDIV,
291 VC5_VCO_CTRL_AND_PREDIV_BYPASS_PREDIV,
292 VC5_VCO_CTRL_AND_PREDIV_BYPASS_PREDIV);
293 regmap_update_bits(vc5->regmap, VC5_REF_DIVIDER, 0xff, 0x00);
297 idiv = DIV_ROUND_UP(parent_rate, rate);
299 /* We have dedicated div-2 predivider. */
301 div = VC5_REF_DIVIDER_SEL_PREDIV2;
303 div = VC5_REF_DIVIDER_REF_DIV(idiv);
305 regmap_update_bits(vc5->regmap, VC5_REF_DIVIDER, 0xff, div);
306 regmap_update_bits(vc5->regmap, VC5_VCO_CTRL_AND_PREDIV,
307 VC5_VCO_CTRL_AND_PREDIV_BYPASS_PREDIV, 0);
312 static const struct clk_ops vc5_mux_ops = {
313 .set_parent = vc5_mux_set_parent,
314 .get_parent = vc5_mux_get_parent,
315 .recalc_rate = vc5_mux_recalc_rate,
316 .round_rate = vc5_mux_round_rate,
317 .set_rate = vc5_mux_set_rate,
321 * VersaClock5 PLL/VCO
323 static unsigned long vc5_pll_recalc_rate(struct clk_hw *hw,
324 unsigned long parent_rate)
326 struct vc5_hw_data *hwdata = container_of(hw, struct vc5_hw_data, hw);
327 struct vc5_driver_data *vc5 = hwdata->vc5;
328 u32 div_int, div_frc;
331 regmap_bulk_read(vc5->regmap, VC5_FEEDBACK_INT_DIV, fb, 5);
333 div_int = (fb[0] << 4) | (fb[1] >> 4);
334 div_frc = (fb[2] << 16) | (fb[3] << 8) | fb[4];
336 /* The PLL divider has 12 integer bits and 24 fractional bits */
337 return (parent_rate * div_int) + ((parent_rate * div_frc) >> 24);
340 static long vc5_pll_round_rate(struct clk_hw *hw, unsigned long rate,
341 unsigned long *parent_rate)
343 struct vc5_hw_data *hwdata = container_of(hw, struct vc5_hw_data, hw);
347 if (rate < VC5_PLL_VCO_MIN)
348 rate = VC5_PLL_VCO_MIN;
349 if (rate > VC5_PLL_VCO_MAX)
350 rate = VC5_PLL_VCO_MAX;
352 /* Determine integer part, which is 12 bit wide */
353 div_int = rate / *parent_rate;
355 rate = *parent_rate * 0xfff;
357 /* Determine best fractional part, which is 24 bit wide */
358 div_frc = rate % *parent_rate;
359 div_frc *= BIT(24) - 1;
360 do_div(div_frc, *parent_rate);
362 hwdata->div_int = div_int;
363 hwdata->div_frc = (u32)div_frc;
365 return (*parent_rate * div_int) + ((*parent_rate * div_frc) >> 24);
368 static int vc5_pll_set_rate(struct clk_hw *hw, unsigned long rate,
369 unsigned long parent_rate)
371 struct vc5_hw_data *hwdata = container_of(hw, struct vc5_hw_data, hw);
372 struct vc5_driver_data *vc5 = hwdata->vc5;
375 fb[0] = hwdata->div_int >> 4;
376 fb[1] = hwdata->div_int << 4;
377 fb[2] = hwdata->div_frc >> 16;
378 fb[3] = hwdata->div_frc >> 8;
379 fb[4] = hwdata->div_frc;
381 return regmap_bulk_write(vc5->regmap, VC5_FEEDBACK_INT_DIV, fb, 5);
384 static const struct clk_ops vc5_pll_ops = {
385 .recalc_rate = vc5_pll_recalc_rate,
386 .round_rate = vc5_pll_round_rate,
387 .set_rate = vc5_pll_set_rate,
390 static unsigned long vc5_fod_recalc_rate(struct clk_hw *hw,
391 unsigned long parent_rate)
393 struct vc5_hw_data *hwdata = container_of(hw, struct vc5_hw_data, hw);
394 struct vc5_driver_data *vc5 = hwdata->vc5;
395 /* VCO frequency is divided by two before entering FOD */
396 u32 f_in = parent_rate / 2;
397 u32 div_int, div_frc;
401 regmap_bulk_read(vc5->regmap, VC5_OUT_DIV_INT(hwdata->num, 0),
403 regmap_bulk_read(vc5->regmap, VC5_OUT_DIV_FRAC(hwdata->num, 0),
406 div_int = (od_int[0] << 4) | (od_int[1] >> 4);
407 div_frc = (od_frc[0] << 22) | (od_frc[1] << 14) |
408 (od_frc[2] << 6) | (od_frc[3] >> 2);
410 /* The PLL divider has 12 integer bits and 30 fractional bits */
411 return div64_u64((u64)f_in << 24ULL, ((u64)div_int << 24ULL) + div_frc);
414 static long vc5_fod_round_rate(struct clk_hw *hw, unsigned long rate,
415 unsigned long *parent_rate)
417 struct vc5_hw_data *hwdata = container_of(hw, struct vc5_hw_data, hw);
418 /* VCO frequency is divided by two before entering FOD */
419 u32 f_in = *parent_rate / 2;
423 /* Determine integer part, which is 12 bit wide */
424 div_int = f_in / rate;
426 * WARNING: The clock chip does not output signal if the integer part
427 * of the divider is 0xfff and fractional part is non-zero.
428 * Clamp the divider at 0xffe to keep the code simple.
430 if (div_int > 0xffe) {
432 rate = f_in / div_int;
435 /* Determine best fractional part, which is 30 bit wide */
436 div_frc = f_in % rate;
438 do_div(div_frc, rate);
440 hwdata->div_int = div_int;
441 hwdata->div_frc = (u32)div_frc;
443 return div64_u64((u64)f_in << 24ULL, ((u64)div_int << 24ULL) + div_frc);
446 static int vc5_fod_set_rate(struct clk_hw *hw, unsigned long rate,
447 unsigned long parent_rate)
449 struct vc5_hw_data *hwdata = container_of(hw, struct vc5_hw_data, hw);
450 struct vc5_driver_data *vc5 = hwdata->vc5;
452 hwdata->div_frc >> 22, hwdata->div_frc >> 14,
453 hwdata->div_frc >> 6, hwdata->div_frc << 2,
456 hwdata->div_int >> 4, hwdata->div_int << 4,
460 regmap_bulk_write(vc5->regmap, VC5_OUT_DIV_FRAC(hwdata->num, 0),
464 * Toggle magic bit in undocumented register for unknown reason.
465 * This is what the IDT timing commander tool does and the chip
466 * datasheet somewhat implies this is needed, but the register
467 * and the bit is not documented.
469 regmap_update_bits(vc5->regmap, VC5_GLOBAL_REGISTER,
470 VC5_GLOBAL_REGISTER_GLOBAL_RESET, 0);
471 regmap_update_bits(vc5->regmap, VC5_GLOBAL_REGISTER,
472 VC5_GLOBAL_REGISTER_GLOBAL_RESET,
473 VC5_GLOBAL_REGISTER_GLOBAL_RESET);
477 static const struct clk_ops vc5_fod_ops = {
478 .recalc_rate = vc5_fod_recalc_rate,
479 .round_rate = vc5_fod_round_rate,
480 .set_rate = vc5_fod_set_rate,
483 static int vc5_clk_out_prepare(struct clk_hw *hw)
485 struct vc5_hw_data *hwdata = container_of(hw, struct vc5_hw_data, hw);
486 struct vc5_driver_data *vc5 = hwdata->vc5;
488 /* Enable the clock buffer */
489 regmap_update_bits(vc5->regmap, VC5_CLK_OUTPUT_CFG(hwdata->num, 1),
490 VC5_CLK_OUTPUT_CFG1_EN_CLKBUF,
491 VC5_CLK_OUTPUT_CFG1_EN_CLKBUF);
495 static void vc5_clk_out_unprepare(struct clk_hw *hw)
497 struct vc5_hw_data *hwdata = container_of(hw, struct vc5_hw_data, hw);
498 struct vc5_driver_data *vc5 = hwdata->vc5;
500 /* Enable the clock buffer */
501 regmap_update_bits(vc5->regmap, VC5_CLK_OUTPUT_CFG(hwdata->num, 1),
502 VC5_CLK_OUTPUT_CFG1_EN_CLKBUF, 0);
505 static unsigned char vc5_clk_out_get_parent(struct clk_hw *hw)
507 struct vc5_hw_data *hwdata = container_of(hw, struct vc5_hw_data, hw);
508 struct vc5_driver_data *vc5 = hwdata->vc5;
509 const u8 mask = VC5_OUT_DIV_CONTROL_SELB_NORM |
510 VC5_OUT_DIV_CONTROL_SEL_EXT |
511 VC5_OUT_DIV_CONTROL_EN_FOD;
512 const u8 fodclkmask = VC5_OUT_DIV_CONTROL_SELB_NORM |
513 VC5_OUT_DIV_CONTROL_EN_FOD;
514 const u8 extclk = VC5_OUT_DIV_CONTROL_SELB_NORM |
515 VC5_OUT_DIV_CONTROL_SEL_EXT;
518 regmap_read(vc5->regmap, VC5_OUT_DIV_CONTROL(hwdata->num), &src);
521 if ((src & fodclkmask) == VC5_OUT_DIV_CONTROL_EN_FOD)
527 dev_warn(&vc5->client->dev,
528 "Invalid clock output configuration (%02x)\n", src);
532 static int vc5_clk_out_set_parent(struct clk_hw *hw, u8 index)
534 struct vc5_hw_data *hwdata = container_of(hw, struct vc5_hw_data, hw);
535 struct vc5_driver_data *vc5 = hwdata->vc5;
536 const u8 mask = VC5_OUT_DIV_CONTROL_RESET |
537 VC5_OUT_DIV_CONTROL_SELB_NORM |
538 VC5_OUT_DIV_CONTROL_SEL_EXT |
539 VC5_OUT_DIV_CONTROL_EN_FOD;
540 const u8 extclk = VC5_OUT_DIV_CONTROL_SELB_NORM |
541 VC5_OUT_DIV_CONTROL_SEL_EXT;
542 u8 src = VC5_OUT_DIV_CONTROL_RESET;
545 src |= VC5_OUT_DIV_CONTROL_EN_FOD;
549 return regmap_update_bits(vc5->regmap, VC5_OUT_DIV_CONTROL(hwdata->num),
553 static const struct clk_ops vc5_clk_out_ops = {
554 .prepare = vc5_clk_out_prepare,
555 .unprepare = vc5_clk_out_unprepare,
556 .set_parent = vc5_clk_out_set_parent,
557 .get_parent = vc5_clk_out_get_parent,
560 static struct clk_hw *vc5_of_clk_get(struct of_phandle_args *clkspec,
563 struct vc5_driver_data *vc5 = data;
564 unsigned int idx = clkspec->args[0];
567 return ERR_PTR(-EINVAL);
569 return &vc5->clk_out[idx].hw;
572 static int vc5_map_index_to_output(const enum vc5_model model,
573 const unsigned int n)
576 case IDT_VC5_5P49V5933:
577 return (n == 0) ? 0 : 3;
578 case IDT_VC5_5P49V5923:
584 static const struct of_device_id clk_vc5_of_match[];
586 static int vc5_probe(struct i2c_client *client,
587 const struct i2c_device_id *id)
589 const struct of_device_id *of_id =
590 of_match_device(clk_vc5_of_match, &client->dev);
591 struct vc5_driver_data *vc5;
592 struct clk_init_data init;
593 const char *parent_names[2];
597 vc5 = devm_kzalloc(&client->dev, sizeof(*vc5), GFP_KERNEL);
601 i2c_set_clientdata(client, vc5);
602 vc5->client = client;
603 vc5->model = (enum vc5_model)of_id->data;
605 vc5->pin_xin = devm_clk_get(&client->dev, "xin");
606 if (PTR_ERR(vc5->pin_xin) == -EPROBE_DEFER)
607 return -EPROBE_DEFER;
609 vc5->pin_clkin = devm_clk_get(&client->dev, "clkin");
610 if (PTR_ERR(vc5->pin_clkin) == -EPROBE_DEFER)
611 return -EPROBE_DEFER;
613 vc5->regmap = devm_regmap_init_i2c(client, &vc5_regmap_config);
614 if (IS_ERR(vc5->regmap)) {
615 dev_err(&client->dev, "failed to allocate register map\n");
616 return PTR_ERR(vc5->regmap);
619 /* Register clock input mux */
620 memset(&init, 0, sizeof(init));
622 if (!IS_ERR(vc5->pin_xin)) {
623 vc5->clk_mux_ins |= VC5_MUX_IN_XIN;
624 parent_names[init.num_parents++] = __clk_get_name(vc5->pin_xin);
625 } else if (vc5->model == IDT_VC5_5P49V5933) {
626 /* IDT VC5 5P49V5933 has built-in oscilator. */
627 vc5->pin_xin = clk_register_fixed_rate(&client->dev,
628 "internal-xtal", NULL,
630 if (IS_ERR(vc5->pin_xin))
631 return PTR_ERR(vc5->pin_xin);
632 vc5->clk_mux_ins |= VC5_MUX_IN_XIN;
633 parent_names[init.num_parents++] = __clk_get_name(vc5->pin_xin);
636 if (!IS_ERR(vc5->pin_clkin)) {
637 vc5->clk_mux_ins |= VC5_MUX_IN_CLKIN;
638 parent_names[init.num_parents++] =
639 __clk_get_name(vc5->pin_clkin);
642 if (!init.num_parents) {
643 dev_err(&client->dev, "no input clock specified!\n");
647 init.name = vc5_mux_names[0];
648 init.ops = &vc5_mux_ops;
650 init.parent_names = parent_names;
651 vc5->clk_mux.init = &init;
652 ret = devm_clk_hw_register(&client->dev, &vc5->clk_mux);
654 dev_err(&client->dev, "unable to register %s\n", init.name);
659 memset(&init, 0, sizeof(init));
660 init.name = vc5_pll_names[0];
661 init.ops = &vc5_pll_ops;
662 init.flags = CLK_SET_RATE_PARENT;
663 init.parent_names = vc5_mux_names;
664 init.num_parents = 1;
665 vc5->clk_pll.num = 0;
666 vc5->clk_pll.vc5 = vc5;
667 vc5->clk_pll.hw.init = &init;
668 ret = devm_clk_hw_register(&client->dev, &vc5->clk_pll.hw);
670 dev_err(&client->dev, "unable to register %s\n", init.name);
675 for (n = 0; n < 2; n++) {
676 idx = vc5_map_index_to_output(vc5->model, n);
677 memset(&init, 0, sizeof(init));
678 init.name = vc5_fod_names[idx];
679 init.ops = &vc5_fod_ops;
680 init.flags = CLK_SET_RATE_PARENT;
681 init.parent_names = vc5_pll_names;
682 init.num_parents = 1;
683 vc5->clk_fod[n].num = idx;
684 vc5->clk_fod[n].vc5 = vc5;
685 vc5->clk_fod[n].hw.init = &init;
686 ret = devm_clk_hw_register(&client->dev, &vc5->clk_fod[n].hw);
688 dev_err(&client->dev, "unable to register %s\n",
694 /* Register MUX-connected OUT0_I2C_SELB output */
695 memset(&init, 0, sizeof(init));
696 init.name = vc5_clk_out_names[0];
697 init.ops = &vc5_clk_out_ops;
698 init.flags = CLK_SET_RATE_PARENT;
699 init.parent_names = vc5_mux_names;
700 init.num_parents = 1;
701 vc5->clk_out[0].num = idx;
702 vc5->clk_out[0].vc5 = vc5;
703 vc5->clk_out[0].hw.init = &init;
704 ret = devm_clk_hw_register(&client->dev, &vc5->clk_out[0].hw);
706 dev_err(&client->dev, "unable to register %s\n",
711 /* Register FOD-connected OUTx outputs */
712 for (n = 1; n < 3; n++) {
713 idx = vc5_map_index_to_output(vc5->model, n - 1);
714 parent_names[0] = vc5_fod_names[idx];
716 parent_names[1] = vc5_mux_names[0];
718 parent_names[1] = vc5_clk_out_names[n - 1];
720 memset(&init, 0, sizeof(init));
721 init.name = vc5_clk_out_names[idx + 1];
722 init.ops = &vc5_clk_out_ops;
723 init.flags = CLK_SET_RATE_PARENT;
724 init.parent_names = parent_names;
725 init.num_parents = 2;
726 vc5->clk_out[n].num = idx;
727 vc5->clk_out[n].vc5 = vc5;
728 vc5->clk_out[n].hw.init = &init;
729 ret = devm_clk_hw_register(&client->dev,
730 &vc5->clk_out[n].hw);
732 dev_err(&client->dev, "unable to register %s\n",
738 ret = of_clk_add_hw_provider(client->dev.of_node, vc5_of_clk_get, vc5);
740 dev_err(&client->dev, "unable to add clk provider\n");
747 if (vc5->model == IDT_VC5_5P49V5933)
748 clk_unregister_fixed_rate(vc5->pin_xin);
752 static int vc5_remove(struct i2c_client *client)
754 struct vc5_driver_data *vc5 = i2c_get_clientdata(client);
756 of_clk_del_provider(client->dev.of_node);
758 if (vc5->model == IDT_VC5_5P49V5933)
759 clk_unregister_fixed_rate(vc5->pin_xin);
764 static const struct i2c_device_id vc5_id[] = {
765 { "5p49v5923", .driver_data = IDT_VC5_5P49V5923 },
766 { "5p49v5933", .driver_data = IDT_VC5_5P49V5933 },
769 MODULE_DEVICE_TABLE(i2c, vc5_id);
771 static const struct of_device_id clk_vc5_of_match[] = {
772 { .compatible = "idt,5p49v5923", .data = (void *)IDT_VC5_5P49V5923 },
773 { .compatible = "idt,5p49v5933", .data = (void *)IDT_VC5_5P49V5933 },
776 MODULE_DEVICE_TABLE(of, clk_vc5_of_match);
778 static struct i2c_driver vc5_driver = {
781 .of_match_table = clk_vc5_of_match,
784 .remove = vc5_remove,
787 module_i2c_driver(vc5_driver);
790 MODULE_DESCRIPTION("IDT VersaClock 5 driver");
791 MODULE_LICENSE("GPL");