arch/xtensa/kernel/setup.c

   1 /*
   2  * arch/xtensa/kernel/setup.c
   3  *
   4  * This file is subject to the terms and conditions of the GNU General Public
   5  * License.  See the file "COPYING" in the main directory of this archive
   6  * for more details.
   7  *
   8  * Copyright (C) 1995  Linus Torvalds
   9  * Copyright (C) 2001 - 2005  Tensilica Inc.
  10  * Copyright (C) 2014 - 2016  Cadence Design Systems Inc.
  11  *
  12  * Chris Zankel <[email protected]>
  13  * Joe Taylor   <[email protected], [email protected]>
  14  * Kevin Chea
  15  * Marc Gauthier<[email protected]> <[email protected]>
  16  */
  17
  18 #include <linux/errno.h>
  19 #include <linux/init.h>
  20 #include <linux/mm.h>
  21 #include <linux/proc_fs.h>
  22 #include <linux/screen_info.h>
  23 #include <linux/bootmem.h>
  24 #include <linux/kernel.h>
  25 #include <linux/percpu.h>
  26 #include <linux/cpu.h>
  27 #include <linux/of.h>
  28 #include <linux/of_fdt.h>
  29
  30 #if defined(CONFIG_VGA_CONSOLE) || defined(CONFIG_DUMMY_CONSOLE)
  31 # include <linux/console.h>
  32 #endif
  33
  34 #ifdef CONFIG_PROC_FS
  35 # include <linux/seq_file.h>
  36 #endif
  37
  38 #include <asm/bootparam.h>
  39 #include <asm/mmu_context.h>
  40 #include <asm/pgtable.h>
  41 #include <asm/processor.h>
  42 #include <asm/timex.h>
  43 #include <asm/platform.h>
  44 #include <asm/page.h>
  45 #include <asm/setup.h>
  46 #include <asm/param.h>
  47 #include <asm/smp.h>
  48 #include <asm/sysmem.h>
  49
  50 #include <platform/hardware.h>
  51
  52 #if defined(CONFIG_VGA_CONSOLE) || defined(CONFIG_DUMMY_CONSOLE)
  53 struct screen_info screen_info = {
  54         .orig_x = 0,
  55         .orig_y = 24,
  56         .orig_video_cols = 80,
  57         .orig_video_lines = 24,
  58         .orig_video_isVGA = 1,
  59         .orig_video_points = 16,
  60 };
  61 #endif
  62
  63 #ifdef CONFIG_BLK_DEV_INITRD
  64 extern unsigned long initrd_start;
  65 extern unsigned long initrd_end;
  66 int initrd_is_mapped = 0;
  67 extern int initrd_below_start_ok;
  68 #endif
  69
  70 #ifdef CONFIG_OF
  71 void *dtb_start = __dtb_start;
  72 #endif
  73
  74 extern unsigned long loops_per_jiffy;
  75
  76 /* Command line specified as configuration option. */
  77
  78 static char __initdata command_line[COMMAND_LINE_SIZE];
  79
  80 #ifdef CONFIG_CMDLINE_BOOL
  81 static char default_command_line[COMMAND_LINE_SIZE] __initdata = CONFIG_CMDLINE;
  82 #endif
  83
  84 /*
  85  * Boot parameter parsing.
  86  *
  87  * The Xtensa port uses a list of variable-sized tags to pass data to
  88  * the kernel. The first tag must be a BP_TAG_FIRST tag for the list
  89  * to be recognised. The list is terminated with a zero-sized
  90  * BP_TAG_LAST tag.
  91  */
  92
  93 typedef struct tagtable {
  94         u32 tag;
  95         int (*parse)(const bp_tag_t*);
  96 } tagtable_t;
  97
  98 #define __tagtable(tag, fn) static tagtable_t __tagtable_##fn           \
  99         __attribute__((used, section(".taglist"))) = { tag, fn }
 100
 101 /* parse current tag */
 102
 103 static int __init parse_tag_mem(const bp_tag_t *tag)
 104 {
 105         struct bp_meminfo *mi = (struct bp_meminfo *)(tag->data);
 106
 107         if (mi->type != MEMORY_TYPE_CONVENTIONAL)
 108                 return -1;
 109
 110         return memblock_add(mi->start, mi->end - mi->start);
 111 }
 112
 113 __tagtable(BP_TAG_MEMORY, parse_tag_mem);
 114
 115 #ifdef CONFIG_BLK_DEV_INITRD
 116
 117 static int __init parse_tag_initrd(const bp_tag_t* tag)
 118 {
 119         struct bp_meminfo *mi = (struct bp_meminfo *)(tag->data);
 120
 121         initrd_start = (unsigned long)__va(mi->start);
 122         initrd_end = (unsigned long)__va(mi->end);
 123
 124         return 0;
 125 }
 126
 127 __tagtable(BP_TAG_INITRD, parse_tag_initrd);
 128
 129 #ifdef CONFIG_OF
 130
 131 static int __init parse_tag_fdt(const bp_tag_t *tag)
 132 {
 133         dtb_start = __va(tag->data[0]);
 134         return 0;
 135 }
 136
 137 __tagtable(BP_TAG_FDT, parse_tag_fdt);
 138
 139 #endif /* CONFIG_OF */
 140
 141 #endif /* CONFIG_BLK_DEV_INITRD */
 142
 143 static int __init parse_tag_cmdline(const bp_tag_t* tag)
 144 {
 145         strlcpy(command_line, (char *)(tag->data), COMMAND_LINE_SIZE);
 146         return 0;
 147 }
 148
 149 __tagtable(BP_TAG_COMMAND_LINE, parse_tag_cmdline);
 150
 151 static int __init parse_bootparam(const bp_tag_t* tag)
 152 {
 153         extern tagtable_t __tagtable_begin, __tagtable_end;
 154         tagtable_t *t;
 155
 156         /* Boot parameters must start with a BP_TAG_FIRST tag. */
 157
 158         if (tag->id != BP_TAG_FIRST) {
 159                 printk(KERN_WARNING "Invalid boot parameters!\n");
 160                 return 0;
 161         }
 162
 163         tag = (bp_tag_t*)((unsigned long)tag + sizeof(bp_tag_t) + tag->size);
 164
 165         /* Parse all tags. */
 166
 167         while (tag != NULL && tag->id != BP_TAG_LAST) {
 168                 for (t = &__tagtable_begin; t < &__tagtable_end; t++) {
 169                         if (tag->id == t->tag) {
 170                                 t->parse(tag);
 171                                 break;
 172                         }
 173                 }
 174                 if (t == &__tagtable_end)
 175                         printk(KERN_WARNING "Ignoring tag "
 176                                "0x%08x\n", tag->id);
 177                 tag = (bp_tag_t*)((unsigned long)(tag + 1) + tag->size);
 178         }
 179
 180         return 0;
 181 }
 182
 183 #ifdef CONFIG_OF
 184
 185 #if !XCHAL_HAVE_PTP_MMU || XCHAL_HAVE_SPANNING_WAY
 186 unsigned long xtensa_kio_paddr = XCHAL_KIO_DEFAULT_PADDR;
 187 EXPORT_SYMBOL(xtensa_kio_paddr);
 188
 189 static int __init xtensa_dt_io_area(unsigned long node, const char *uname,
 190                 int depth, void *data)
 191 {
 192         const __be32 *ranges;
 193         int len;
 194
 195         if (depth > 1)
 196                 return 0;
 197
 198         if (!of_flat_dt_is_compatible(node, "simple-bus"))
 199                 return 0;
 200
 201         ranges = of_get_flat_dt_prop(node, "ranges", &len);
 202         if (!ranges)
 203                 return 1;
 204         if (len == 0)
 205                 return 1;
 206
 207         xtensa_kio_paddr = of_read_ulong(ranges+1, 1);
 208         /* round down to nearest 256MB boundary */
 209         xtensa_kio_paddr &= 0xf0000000;
 210
 211         return 1;
 212 }
 213 #else
 214 static int __init xtensa_dt_io_area(unsigned long node, const char *uname,
 215                 int depth, void *data)
 216 {
 217         return 1;
 218 }
 219 #endif
 220
 221 void __init early_init_dt_add_memory_arch(u64 base, u64 size)
 222 {
 223         size &= PAGE_MASK;
 224         memblock_add(base, size);
 225 }
 226
 227 void * __init early_init_dt_alloc_memory_arch(u64 size, u64 align)
 228 {
 229         return __alloc_bootmem(size, align, 0);
 230 }
 231
 232 void __init early_init_devtree(void *params)
 233 {
 234         early_init_dt_scan(params);
 235         of_scan_flat_dt(xtensa_dt_io_area, NULL);
 236
 237         if (!command_line[0])
 238                 strlcpy(command_line, boot_command_line, COMMAND_LINE_SIZE);
 239 }
 240
 241 #endif /* CONFIG_OF */
 242
 243 /*
 244  * Initialize architecture. (Early stage)
 245  */
 246
 247 void __init init_arch(bp_tag_t *bp_start)
 248 {
 249         /* Parse boot parameters */
 250
 251         if (bp_start)
 252                 parse_bootparam(bp_start);
 253
 254 #ifdef CONFIG_OF
 255         early_init_devtree(dtb_start);
 256 #endif
 257
 258 #ifdef CONFIG_CMDLINE_BOOL
 259         if (!command_line[0])
 260                 strlcpy(command_line, default_command_line, COMMAND_LINE_SIZE);
 261 #endif
 262
 263         /* Early hook for platforms */
 264
 265         platform_init(bp_start);
 266
 267         /* Initialize MMU. */
 268
 269         init_mmu();
 270 }
 271
 272 /*
 273  * Initialize system. Setup memory and reserve regions.
 274  */
 275
 276 extern char _end;
 277 extern char _stext;
 278 extern char _WindowVectors_text_start;
 279 extern char _WindowVectors_text_end;
 280 extern char _DebugInterruptVector_literal_start;
 281 extern char _DebugInterruptVector_text_end;
 282 extern char _KernelExceptionVector_literal_start;
 283 extern char _KernelExceptionVector_text_end;
 284 extern char _UserExceptionVector_literal_start;
 285 extern char _UserExceptionVector_text_end;
 286 extern char _DoubleExceptionVector_literal_start;
 287 extern char _DoubleExceptionVector_text_end;
 288 #if XCHAL_EXCM_LEVEL >= 2
 289 extern char _Level2InterruptVector_text_start;
 290 extern char _Level2InterruptVector_text_end;
 291 #endif
 292 #if XCHAL_EXCM_LEVEL >= 3
 293 extern char _Level3InterruptVector_text_start;
 294 extern char _Level3InterruptVector_text_end;
 295 #endif
 296 #if XCHAL_EXCM_LEVEL >= 4
 297 extern char _Level4InterruptVector_text_start;
 298 extern char _Level4InterruptVector_text_end;
 299 #endif
 300 #if XCHAL_EXCM_LEVEL >= 5
 301 extern char _Level5InterruptVector_text_start;
 302 extern char _Level5InterruptVector_text_end;
 303 #endif
 304 #if XCHAL_EXCM_LEVEL >= 6
 305 extern char _Level6InterruptVector_text_start;
 306 extern char _Level6InterruptVector_text_end;
 307 #endif
 308 #ifdef CONFIG_SMP
 309 extern char _SecondaryResetVector_text_start;
 310 extern char _SecondaryResetVector_text_end;
 311 #endif
 312
 313 static inline int mem_reserve(unsigned long start, unsigned long end)
 314 {
 315         return memblock_reserve(start, end - start);
 316 }
 317
 318 void __init setup_arch(char **cmdline_p)
 319 {
 320         strlcpy(boot_command_line, command_line, COMMAND_LINE_SIZE);
 321         *cmdline_p = command_line;
 322
 323         /* Reserve some memory regions */
 324
 325 #ifdef CONFIG_BLK_DEV_INITRD
 326         if (initrd_start < initrd_end) {
 327                 initrd_is_mapped = mem_reserve(__pa(initrd_start),
 328                                                __pa(initrd_end)) == 0;
 329                 initrd_below_start_ok = 1;
 330         } else {
 331                 initrd_start = 0;
 332         }
 333 #endif
 334
 335         mem_reserve(__pa(&_stext), __pa(&_end));
 336
 337         mem_reserve(__pa(&_WindowVectors_text_start),
 338                     __pa(&_WindowVectors_text_end));
 339
 340         mem_reserve(__pa(&_DebugInterruptVector_literal_start),
 341                     __pa(&_DebugInterruptVector_text_end));
 342
 343         mem_reserve(__pa(&_KernelExceptionVector_literal_start),
 344                     __pa(&_KernelExceptionVector_text_end));
 345
 346         mem_reserve(__pa(&_UserExceptionVector_literal_start),
 347                     __pa(&_UserExceptionVector_text_end));
 348
 349         mem_reserve(__pa(&_DoubleExceptionVector_literal_start),
 350                     __pa(&_DoubleExceptionVector_text_end));
 351
 352 #if XCHAL_EXCM_LEVEL >= 2
 353         mem_reserve(__pa(&_Level2InterruptVector_text_start),
 354                     __pa(&_Level2InterruptVector_text_end));
 355 #endif
 356 #if XCHAL_EXCM_LEVEL >= 3
 357         mem_reserve(__pa(&_Level3InterruptVector_text_start),
 358                     __pa(&_Level3InterruptVector_text_end));
 359 #endif
 360 #if XCHAL_EXCM_LEVEL >= 4
 361         mem_reserve(__pa(&_Level4InterruptVector_text_start),
 362                     __pa(&_Level4InterruptVector_text_end));
 363 #endif
 364 #if XCHAL_EXCM_LEVEL >= 5
 365         mem_reserve(__pa(&_Level5InterruptVector_text_start),
 366                     __pa(&_Level5InterruptVector_text_end));
 367 #endif
 368 #if XCHAL_EXCM_LEVEL >= 6
 369         mem_reserve(__pa(&_Level6InterruptVector_text_start),
 370                     __pa(&_Level6InterruptVector_text_end));
 371 #endif
 372
 373 #ifdef CONFIG_SMP
 374         mem_reserve(__pa(&_SecondaryResetVector_text_start),
 375                     __pa(&_SecondaryResetVector_text_end));
 376 #endif
 377         parse_early_param();
 378         bootmem_init();
 379
 380         unflatten_and_copy_device_tree();
 381
 382         platform_setup(cmdline_p);
 383
 384 #ifdef CONFIG_SMP
 385         smp_init_cpus();
 386 #endif
 387
 388         paging_init();
 389         zones_init();
 390
 391 #ifdef CONFIG_VT
 392 # if defined(CONFIG_VGA_CONSOLE)
 393         conswitchp = &vga_con;
 394 # elif defined(CONFIG_DUMMY_CONSOLE)
 395         conswitchp = &dummy_con;
 396 # endif
 397 #endif
 398
 399 #ifdef CONFIG_PCI
 400         platform_pcibios_init();
 401 #endif
 402 }
 403
 404 static DEFINE_PER_CPU(struct cpu, cpu_data);
 405
 406 static int __init topology_init(void)
 407 {
 408         int i;
 409
 410         for_each_possible_cpu(i) {
 411                 struct cpu *cpu = &per_cpu(cpu_data, i);
 412                 cpu->hotpluggable = !!i;
 413                 register_cpu(cpu, i);
 414         }
 415
 416         return 0;
 417 }
 418 subsys_initcall(topology_init);
 419
 420 void cpu_reset(void)
 421 {
 422 #if XCHAL_HAVE_PTP_MMU && IS_ENABLED(CONFIG_MMU)
 423         local_irq_disable();
 424         /*
 425          * We have full MMU: all autoload ways, ways 7, 8 and 9 of DTLB must
 426          * be flushed.
 427          * Way 4 is not currently used by linux.
 428          * Ways 5 and 6 shall not be touched on MMUv2 as they are hardwired.
 429          * Way 5 shall be flushed and way 6 shall be set to identity mapping
 430          * on MMUv3.
 431          */
 432         local_flush_tlb_all();
 433         invalidate_page_directory();
 434 #if XCHAL_HAVE_SPANNING_WAY
 435         /* MMU v3 */
 436         {
 437                 unsigned long vaddr = (unsigned long)cpu_reset;
 438                 unsigned long paddr = __pa(vaddr);
 439                 unsigned long tmpaddr = vaddr + SZ_512M;
 440                 unsigned long tmp0, tmp1, tmp2, tmp3;
 441
 442                 /*
 443                  * Find a place for the temporary mapping. It must not be
 444                  * in the same 512MB region with vaddr or paddr, otherwise
 445                  * there may be multihit exception either on entry to the
 446                  * temporary mapping, or on entry to the identity mapping.
 447                  * (512MB is the biggest page size supported by TLB.)
 448                  */
 449                 while (((tmpaddr ^ paddr) & -SZ_512M) == 0)
 450                         tmpaddr += SZ_512M;
 451
 452                 /* Invalidate mapping in the selected temporary area */
 453                 if (itlb_probe(tmpaddr) & 0x8)
 454                         invalidate_itlb_entry(itlb_probe(tmpaddr));
 455                 if (itlb_probe(tmpaddr + PAGE_SIZE) & 0x8)
 456                         invalidate_itlb_entry(itlb_probe(tmpaddr + PAGE_SIZE));
 457
 458                 /*
 459                  * Map two consecutive pages starting at the physical address
 460                  * of this function to the temporary mapping area.
 461                  */
 462                 write_itlb_entry(__pte((paddr & PAGE_MASK) |
 463                                        _PAGE_HW_VALID |
 464                                        _PAGE_HW_EXEC |
 465                                        _PAGE_CA_BYPASS),
 466                                  tmpaddr & PAGE_MASK);
 467                 write_itlb_entry(__pte(((paddr & PAGE_MASK) + PAGE_SIZE) |
 468                                        _PAGE_HW_VALID |
 469                                        _PAGE_HW_EXEC |
 470                                        _PAGE_CA_BYPASS),
 471                                  (tmpaddr & PAGE_MASK) + PAGE_SIZE);
 472
 473                 /* Reinitialize TLB */
 474                 __asm__ __volatile__ ("movi     %0, 1f\n\t"
 475                                       "movi     %3, 2f\n\t"
 476                                       "add      %0, %0, %4\n\t"
 477                                       "add      %3, %3, %5\n\t"
 478                                       "jx       %0\n"
 479                                       /*
 480                                        * No literal, data or stack access
 481                                        * below this point
 482                                        */
 483                                       "1:\n\t"
 484                                       /* Initialize *tlbcfg */
 485                                       "movi     %0, 0\n\t"
 486                                       "wsr      %0, itlbcfg\n\t"
 487                                       "wsr      %0, dtlbcfg\n\t"
 488                                       /* Invalidate TLB way 5 */
 489                                       "movi     %0, 4\n\t"
 490                                       "movi     %1, 5\n"
 491                                       "1:\n\t"
 492                                       "iitlb    %1\n\t"
 493                                       "idtlb    %1\n\t"
 494                                       "add      %1, %1, %6\n\t"
 495                                       "addi     %0, %0, -1\n\t"
 496                                       "bnez     %0, 1b\n\t"
 497                                       /* Initialize TLB way 6 */
 498                                       "movi     %0, 7\n\t"
 499                                       "addi     %1, %9, 3\n\t"
 500                                       "addi     %2, %9, 6\n"
 501                                       "1:\n\t"
 502                                       "witlb    %1, %2\n\t"
 503                                       "wdtlb    %1, %2\n\t"
 504                                       "add      %1, %1, %7\n\t"
 505                                       "add      %2, %2, %7\n\t"
 506                                       "addi     %0, %0, -1\n\t"
 507                                       "bnez     %0, 1b\n\t"
 508                                       /* Jump to identity mapping */
 509                                       "jx       %3\n"
 510                                       "2:\n\t"
 511                                       /* Complete way 6 initialization */
 512                                       "witlb    %1, %2\n\t"
 513                                       "wdtlb    %1, %2\n\t"
 514                                       /* Invalidate temporary mapping */
 515                                       "sub      %0, %9, %7\n\t"
 516                                       "iitlb    %0\n\t"
 517                                       "add      %0, %0, %8\n\t"
 518                                       "iitlb    %0"
 519                                       : "=&a"(tmp0), "=&a"(tmp1), "=&a"(tmp2),
 520                                         "=&a"(tmp3)
 521                                       : "a"(tmpaddr - vaddr),
 522                                         "a"(paddr - vaddr),
 523                                         "a"(SZ_128M), "a"(SZ_512M),
 524                                         "a"(PAGE_SIZE),
 525                                         "a"((tmpaddr + SZ_512M) & PAGE_MASK)
 526                                       : "memory");
 527         }
 528 #endif
 529 #endif
 530         __asm__ __volatile__ ("movi     a2, 0\n\t"
 531                               "wsr      a2, icountlevel\n\t"
 532                               "movi     a2, 0\n\t"
 533                               "wsr      a2, icount\n\t"
 534 #if XCHAL_NUM_IBREAK > 0
 535                               "wsr      a2, ibreakenable\n\t"
 536 #endif
 537 #if XCHAL_HAVE_LOOPS
 538                               "wsr      a2, lcount\n\t"
 539 #endif
 540                               "movi     a2, 0x1f\n\t"
 541                               "wsr      a2, ps\n\t"
 542                               "isync\n\t"
 543                               "jx       %0\n\t"
 544                               :
 545                               : "a" (XCHAL_RESET_VECTOR_VADDR)
 546                               : "a2");
 547         for (;;)
 548                 ;
 549 }
 550
 551 void machine_restart(char * cmd)
 552 {
 553         platform_restart();
 554 }
 555
 556 void machine_halt(void)
 557 {
 558         platform_halt();
 559         while (1);
 560 }
 561
 562 void machine_power_off(void)
 563 {
 564         platform_power_off();
 565         while (1);
 566 }
 567 #ifdef CONFIG_PROC_FS
 568
 569 /*
 570  * Display some core information through /proc/cpuinfo.
 571  */
 572
 573 static int
 574 c_show(struct seq_file *f, void *slot)
 575 {
 576         /* high-level stuff */
 577         seq_printf(f, "CPU count\t: %u\n"
 578                       "CPU list\t: %*pbl\n"
 579                       "vendor_id\t: Tensilica\n"
 580                       "model\t\t: Xtensa " XCHAL_HW_VERSION_NAME "\n"
 581                       "core ID\t\t: " XCHAL_CORE_ID "\n"
 582                       "build ID\t: 0x%x\n"
 583                       "byte order\t: %s\n"
 584                       "cpu MHz\t\t: %lu.%02lu\n"
 585                       "bogomips\t: %lu.%02lu\n",
 586                       num_online_cpus(),
 587                       cpumask_pr_args(cpu_online_mask),
 588                       XCHAL_BUILD_UNIQUE_ID,
 589                       XCHAL_HAVE_BE ?  "big" : "little",
 590                       ccount_freq/1000000,
 591                       (ccount_freq/10000) % 100,
 592                       loops_per_jiffy/(500000/HZ),
 593                       (loops_per_jiffy/(5000/HZ)) % 100);
 594
 595         seq_printf(f,"flags\t\t: "
 596 #if XCHAL_HAVE_NMI
 597                      "nmi "
 598 #endif
 599 #if XCHAL_HAVE_DEBUG
 600                      "debug "
 601 # if XCHAL_HAVE_OCD
 602                      "ocd "
 603 # endif
 604 #endif
 605 #if XCHAL_HAVE_DENSITY
 606                      "density "
 607 #endif
 608 #if XCHAL_HAVE_BOOLEANS
 609                      "boolean "
 610 #endif
 611 #if XCHAL_HAVE_LOOPS
 612                      "loop "
 613 #endif
 614 #if XCHAL_HAVE_NSA
 615                      "nsa "
 616 #endif
 617 #if XCHAL_HAVE_MINMAX
 618                      "minmax "
 619 #endif
 620 #if XCHAL_HAVE_SEXT
 621                      "sext "
 622 #endif
 623 #if XCHAL_HAVE_CLAMPS
 624                      "clamps "
 625 #endif
 626 #if XCHAL_HAVE_MAC16
 627                      "mac16 "
 628 #endif
 629 #if XCHAL_HAVE_MUL16
 630                      "mul16 "
 631 #endif
 632 #if XCHAL_HAVE_MUL32
 633                      "mul32 "
 634 #endif
 635 #if XCHAL_HAVE_MUL32_HIGH
 636                      "mul32h "
 637 #endif
 638 #if XCHAL_HAVE_FP
 639                      "fpu "
 640 #endif
 641 #if XCHAL_HAVE_S32C1I
 642                      "s32c1i "
 643 #endif
 644                      "\n");
 645
 646         /* Registers. */
 647         seq_printf(f,"physical aregs\t: %d\n"
 648                      "misc regs\t: %d\n"
 649                      "ibreak\t\t: %d\n"
 650                      "dbreak\t\t: %d\n",
 651                      XCHAL_NUM_AREGS,
 652                      XCHAL_NUM_MISC_REGS,
 653                      XCHAL_NUM_IBREAK,
 654                      XCHAL_NUM_DBREAK);
 655
 656
 657         /* Interrupt. */
 658         seq_printf(f,"num ints\t: %d\n"
 659                      "ext ints\t: %d\n"
 660                      "int levels\t: %d\n"
 661                      "timers\t\t: %d\n"
 662                      "debug level\t: %d\n",
 663                      XCHAL_NUM_INTERRUPTS,
 664                      XCHAL_NUM_EXTINTERRUPTS,
 665                      XCHAL_NUM_INTLEVELS,
 666                      XCHAL_NUM_TIMERS,
 667                      XCHAL_DEBUGLEVEL);
 668
 669         /* Cache */
 670         seq_printf(f,"icache line size: %d\n"
 671                      "icache ways\t: %d\n"
 672                      "icache size\t: %d\n"
 673                      "icache flags\t: "
 674 #if XCHAL_ICACHE_LINE_LOCKABLE
 675                      "lock "
 676 #endif
 677                      "\n"
 678                      "dcache line size: %d\n"
 679                      "dcache ways\t: %d\n"
 680                      "dcache size\t: %d\n"
 681                      "dcache flags\t: "
 682 #if XCHAL_DCACHE_IS_WRITEBACK
 683                      "writeback "
 684 #endif
 685 #if XCHAL_DCACHE_LINE_LOCKABLE
 686                      "lock "
 687 #endif
 688                      "\n",
 689                      XCHAL_ICACHE_LINESIZE,
 690                      XCHAL_ICACHE_WAYS,
 691                      XCHAL_ICACHE_SIZE,
 692                      XCHAL_DCACHE_LINESIZE,
 693                      XCHAL_DCACHE_WAYS,
 694                      XCHAL_DCACHE_SIZE);
 695
 696         return 0;
 697 }
 698
 699 /*
 700  * We show only CPU #0 info.
 701  */
 702 static void *
 703 c_start(struct seq_file *f, loff_t *pos)
 704 {
 705         return (*pos == 0) ? (void *)1 : NULL;
 706 }
 707
 708 static void *
 709 c_next(struct seq_file *f, void *v, loff_t *pos)
 710 {
 711         return NULL;
 712 }
 713
 714 static void
 715 c_stop(struct seq_file *f, void *v)
 716 {
 717 }
 718
 719 const struct seq_operations cpuinfo_op =
 720 {
 721         .start  = c_start,
 722         .next   = c_next,
 723         .stop   = c_stop,
 724         .show   = c_show,
 725 };
 726
 727 #endif /* CONFIG_PROC_FS */