arch/mips/kernel/smp-bmips.c

   1 /*
   2  * This file is subject to the terms and conditions of the GNU General Public
   3  * License.  See the file "COPYING" in the main directory of this archive
   4  * for more details.
   5  *
   6  * Copyright (C) 2011 by Kevin Cernekee ([email protected])
   7  *
   8  * SMP support for BMIPS
   9  */
  10
  11 #include <linux/init.h>
  12 #include <linux/sched.h>
  13 #include <linux/sched/hotplug.h>
  14 #include <linux/sched/task_stack.h>
  15 #include <linux/mm.h>
  16 #include <linux/delay.h>
  17 #include <linux/smp.h>
  18 #include <linux/interrupt.h>
  19 #include <linux/spinlock.h>
  20 #include <linux/cpu.h>
  21 #include <linux/cpumask.h>
  22 #include <linux/reboot.h>
  23 #include <linux/io.h>
  24 #include <linux/compiler.h>
  25 #include <linux/linkage.h>
  26 #include <linux/bug.h>
  27 #include <linux/kernel.h>
  28
  29 #include <asm/time.h>
  30 #include <asm/pgtable.h>
  31 #include <asm/processor.h>
  32 #include <asm/bootinfo.h>
  33 #include <asm/pmon.h>
  34 #include <asm/cacheflush.h>
  35 #include <asm/tlbflush.h>
  36 #include <asm/mipsregs.h>
  37 #include <asm/bmips.h>
  38 #include <asm/traps.h>
  39 #include <asm/barrier.h>
  40 #include <asm/cpu-features.h>
  41
  42 static int __maybe_unused max_cpus = 1;
  43
  44 /* these may be configured by the platform code */
  45 int bmips_smp_enabled = 1;
  46 int bmips_cpu_offset;
  47 cpumask_t bmips_booted_mask;
  48 unsigned long bmips_tp1_irqs = IE_IRQ1;
  49
  50 #define RESET_FROM_KSEG0                0x80080800
  51 #define RESET_FROM_KSEG1                0xa0080800
  52
  53 static void bmips_set_reset_vec(int cpu, u32 val);
  54
  55 #ifdef CONFIG_SMP
  56
  57 /* initial $sp, $gp - used by arch/mips/kernel/bmips_vec.S */
  58 unsigned long bmips_smp_boot_sp;
  59 unsigned long bmips_smp_boot_gp;
  60
  61 static void bmips43xx_send_ipi_single(int cpu, unsigned int action);
  62 static void bmips5000_send_ipi_single(int cpu, unsigned int action);
  63 static irqreturn_t bmips43xx_ipi_interrupt(int irq, void *dev_id);
  64 static irqreturn_t bmips5000_ipi_interrupt(int irq, void *dev_id);
  65
  66 /* SW interrupts 0,1 are used for interprocessor signaling */
  67 #define IPI0_IRQ                        (MIPS_CPU_IRQ_BASE + 0)
  68 #define IPI1_IRQ                        (MIPS_CPU_IRQ_BASE + 1)
  69
  70 #define CPUNUM(cpu, shift)              (((cpu) + bmips_cpu_offset) << (shift))
  71 #define ACTION_CLR_IPI(cpu, ipi)        (0x2000 | CPUNUM(cpu, 9) | ((ipi) << 8))
  72 #define ACTION_SET_IPI(cpu, ipi)        (0x3000 | CPUNUM(cpu, 9) | ((ipi) << 8))
  73 #define ACTION_BOOT_THREAD(cpu)         (0x08 | CPUNUM(cpu, 0))
  74
  75 static void __init bmips_smp_setup(void)
  76 {
  77         int i, cpu = 1, boot_cpu = 0;
  78         int cpu_hw_intr;
  79
  80         switch (current_cpu_type()) {
  81         case CPU_BMIPS4350:
  82         case CPU_BMIPS4380:
  83                 /* arbitration priority */
  84                 clear_c0_brcm_cmt_ctrl(0x30);
  85
  86                 /* NBK and weak order flags */
  87                 set_c0_brcm_config_0(0x30000);
  88
  89                 /* Find out if we are running on TP0 or TP1 */
  90                 boot_cpu = !!(read_c0_brcm_cmt_local() & (1 << 31));
  91
  92                 /*
  93                  * MIPS interrupts 0,1 (SW INT 0,1) cross over to the other
  94                  * thread
  95                  * MIPS interrupt 2 (HW INT 0) is the CPU0 L1 controller output
  96                  * MIPS interrupt 3 (HW INT 1) is the CPU1 L1 controller output
  97                  */
  98                 if (boot_cpu == 0)
  99                         cpu_hw_intr = 0x02;
 100                 else
 101                         cpu_hw_intr = 0x1d;
 102
 103                 change_c0_brcm_cmt_intr(0xf8018000,
 104                                         (cpu_hw_intr << 27) | (0x03 << 15));
 105
 106                 /* single core, 2 threads (2 pipelines) */
 107                 max_cpus = 2;
 108
 109                 break;
 110         case CPU_BMIPS5000:
 111                 /* enable raceless SW interrupts */
 112                 set_c0_brcm_config(0x03 << 22);
 113
 114                 /* route HW interrupt 0 to CPU0, HW interrupt 1 to CPU1 */
 115                 change_c0_brcm_mode(0x1f << 27, 0x02 << 27);
 116
 117                 /* N cores, 2 threads per core */
 118                 max_cpus = (((read_c0_brcm_config() >> 6) & 0x03) + 1) << 1;
 119
 120                 /* clear any pending SW interrupts */
 121                 for (i = 0; i < max_cpus; i++) {
 122                         write_c0_brcm_action(ACTION_CLR_IPI(i, 0));
 123                         write_c0_brcm_action(ACTION_CLR_IPI(i, 1));
 124                 }
 125
 126                 break;
 127         default:
 128                 max_cpus = 1;
 129         }
 130
 131         if (!bmips_smp_enabled)
 132                 max_cpus = 1;
 133
 134         /* this can be overridden by the BSP */
 135         if (!board_ebase_setup)
 136                 board_ebase_setup = &bmips_ebase_setup;
 137
 138         __cpu_number_map[boot_cpu] = 0;
 139         __cpu_logical_map[0] = boot_cpu;
 140
 141         for (i = 0; i < max_cpus; i++) {
 142                 if (i != boot_cpu) {
 143                         __cpu_number_map[i] = cpu;
 144                         __cpu_logical_map[cpu] = i;
 145                         cpu++;
 146                 }
 147                 set_cpu_possible(i, 1);
 148                 set_cpu_present(i, 1);
 149         }
 150 }
 151
 152 /*
 153  * IPI IRQ setup - runs on CPU0
 154  */
 155 static void bmips_prepare_cpus(unsigned int max_cpus)
 156 {
 157         irqreturn_t (*bmips_ipi_interrupt)(int irq, void *dev_id);
 158
 159         switch (current_cpu_type()) {
 160         case CPU_BMIPS4350:
 161         case CPU_BMIPS4380:
 162                 bmips_ipi_interrupt = bmips43xx_ipi_interrupt;
 163                 break;
 164         case CPU_BMIPS5000:
 165                 bmips_ipi_interrupt = bmips5000_ipi_interrupt;
 166                 break;
 167         default:
 168                 return;
 169         }
 170
 171         if (request_irq(IPI0_IRQ, bmips_ipi_interrupt,
 172                         IRQF_PERCPU | IRQF_NO_SUSPEND, "smp_ipi0", NULL))
 173                 panic("Can't request IPI0 interrupt");
 174         if (request_irq(IPI1_IRQ, bmips_ipi_interrupt,
 175                         IRQF_PERCPU | IRQF_NO_SUSPEND, "smp_ipi1", NULL))
 176                 panic("Can't request IPI1 interrupt");
 177 }
 178
 179 /*
 180  * Tell the hardware to boot CPUx - runs on CPU0
 181  */
 182 static int bmips_boot_secondary(int cpu, struct task_struct *idle)
 183 {
 184         bmips_smp_boot_sp = __KSTK_TOS(idle);
 185         bmips_smp_boot_gp = (unsigned long)task_thread_info(idle);
 186         mb();
 187
 188         /*
 189          * Initial boot sequence for secondary CPU:
 190          *   bmips_reset_nmi_vec @ a000_0000 ->
 191          *   bmips_smp_entry ->
 192          *   plat_wired_tlb_setup (cached function call; optional) ->
 193          *   start_secondary (cached jump)
 194          *
 195          * Warm restart sequence:
 196          *   play_dead WAIT loop ->
 197          *   bmips_smp_int_vec @ BMIPS_WARM_RESTART_VEC ->
 198          *   eret to play_dead ->
 199          *   bmips_secondary_reentry ->
 200          *   start_secondary
 201          */
 202
 203         pr_info("SMP: Booting CPU%d...\n", cpu);
 204
 205         if (cpumask_test_cpu(cpu, &bmips_booted_mask)) {
 206                 /* kseg1 might not exist if this CPU enabled XKS01 */
 207                 bmips_set_reset_vec(cpu, RESET_FROM_KSEG0);
 208
 209                 switch (current_cpu_type()) {
 210                 case CPU_BMIPS4350:
 211                 case CPU_BMIPS4380:
 212                         bmips43xx_send_ipi_single(cpu, 0);
 213                         break;
 214                 case CPU_BMIPS5000:
 215                         bmips5000_send_ipi_single(cpu, 0);
 216                         break;
 217                 }
 218         } else {
 219                 bmips_set_reset_vec(cpu, RESET_FROM_KSEG1);
 220
 221                 switch (current_cpu_type()) {
 222                 case CPU_BMIPS4350:
 223                 case CPU_BMIPS4380:
 224                         /* Reset slave TP1 if booting from TP0 */
 225                         if (cpu_logical_map(cpu) == 1)
 226                                 set_c0_brcm_cmt_ctrl(0x01);
 227                         break;
 228                 case CPU_BMIPS5000:
 229                         write_c0_brcm_action(ACTION_BOOT_THREAD(cpu));
 230                         break;
 231                 }
 232                 cpumask_set_cpu(cpu, &bmips_booted_mask);
 233         }
 234
 235         return 0;
 236 }
 237
 238 /*
 239  * Early setup - runs on secondary CPU after cache probe
 240  */
 241 static void bmips_init_secondary(void)
 242 {
 243         switch (current_cpu_type()) {
 244         case CPU_BMIPS4350:
 245         case CPU_BMIPS4380:
 246                 clear_c0_cause(smp_processor_id() ? C_SW1 : C_SW0);
 247                 break;
 248         case CPU_BMIPS5000:
 249                 write_c0_brcm_action(ACTION_CLR_IPI(smp_processor_id(), 0));
 250                 cpu_set_core(&current_cpu_data, (read_c0_brcm_config() >> 25) & 3);
 251                 break;
 252         }
 253 }
 254
 255 /*
 256  * Late setup - runs on secondary CPU before entering the idle loop
 257  */
 258 static void bmips_smp_finish(void)
 259 {
 260         pr_info("SMP: CPU%d is running\n", smp_processor_id());
 261
 262         /* make sure there won't be a timer interrupt for a little while */
 263         write_c0_compare(read_c0_count() + mips_hpt_frequency / HZ);
 264
 265         irq_enable_hazard();
 266         set_c0_status(IE_SW0 | IE_SW1 | bmips_tp1_irqs | IE_IRQ5 | ST0_IE);
 267         irq_enable_hazard();
 268 }
 269
 270 /*
 271  * BMIPS5000 raceless IPIs
 272  *
 273  * Each CPU has two inbound SW IRQs which are independent of all other CPUs.
 274  * IPI0 is used for SMP_RESCHEDULE_YOURSELF
 275  * IPI1 is used for SMP_CALL_FUNCTION
 276  */
 277
 278 static void bmips5000_send_ipi_single(int cpu, unsigned int action)
 279 {
 280         write_c0_brcm_action(ACTION_SET_IPI(cpu, action == SMP_CALL_FUNCTION));
 281 }
 282
 283 static irqreturn_t bmips5000_ipi_interrupt(int irq, void *dev_id)
 284 {
 285         int action = irq - IPI0_IRQ;
 286
 287         write_c0_brcm_action(ACTION_CLR_IPI(smp_processor_id(), action));
 288
 289         if (action == 0)
 290                 scheduler_ipi();
 291         else
 292                 generic_smp_call_function_interrupt();
 293
 294         return IRQ_HANDLED;
 295 }
 296
 297 static void bmips5000_send_ipi_mask(const struct cpumask *mask,
 298         unsigned int action)
 299 {
 300         unsigned int i;
 301
 302         for_each_cpu(i, mask)
 303                 bmips5000_send_ipi_single(i, action);
 304 }
 305
 306 /*
 307  * BMIPS43xx racey IPIs
 308  *
 309  * We use one inbound SW IRQ for each CPU.
 310  *
 311  * A spinlock must be held in order to keep CPUx from accidentally clearing
 312  * an incoming IPI when it writes CP0 CAUSE to raise an IPI on CPUy.  The
 313  * same spinlock is used to protect the action masks.
 314  */
 315
 316 static DEFINE_SPINLOCK(ipi_lock);
 317 static DEFINE_PER_CPU(int, ipi_action_mask);
 318
 319 static void bmips43xx_send_ipi_single(int cpu, unsigned int action)
 320 {
 321         unsigned long flags;
 322
 323         spin_lock_irqsave(&ipi_lock, flags);
 324         set_c0_cause(cpu ? C_SW1 : C_SW0);
 325         per_cpu(ipi_action_mask, cpu) |= action;
 326         irq_enable_hazard();
 327         spin_unlock_irqrestore(&ipi_lock, flags);
 328 }
 329
 330 static irqreturn_t bmips43xx_ipi_interrupt(int irq, void *dev_id)
 331 {
 332         unsigned long flags;
 333         int action, cpu = irq - IPI0_IRQ;
 334
 335         spin_lock_irqsave(&ipi_lock, flags);
 336         action = __this_cpu_read(ipi_action_mask);
 337         per_cpu(ipi_action_mask, cpu) = 0;
 338         clear_c0_cause(cpu ? C_SW1 : C_SW0);
 339         spin_unlock_irqrestore(&ipi_lock, flags);
 340
 341         if (action & SMP_RESCHEDULE_YOURSELF)
 342                 scheduler_ipi();
 343         if (action & SMP_CALL_FUNCTION)
 344                 generic_smp_call_function_interrupt();
 345
 346         return IRQ_HANDLED;
 347 }
 348
 349 static void bmips43xx_send_ipi_mask(const struct cpumask *mask,
 350         unsigned int action)
 351 {
 352         unsigned int i;
 353
 354         for_each_cpu(i, mask)
 355                 bmips43xx_send_ipi_single(i, action);
 356 }
 357
 358 #ifdef CONFIG_HOTPLUG_CPU
 359
 360 static int bmips_cpu_disable(void)
 361 {
 362         unsigned int cpu = smp_processor_id();
 363
 364         if (cpu == 0)
 365                 return -EBUSY;
 366
 367         pr_info("SMP: CPU%d is offline\n", cpu);
 368
 369         set_cpu_online(cpu, false);
 370         calculate_cpu_foreign_map();
 371         irq_cpu_offline();
 372         clear_c0_status(IE_IRQ5);
 373
 374         local_flush_tlb_all();
 375         local_flush_icache_range(0, ~0);
 376
 377         return 0;
 378 }
 379
 380 static void bmips_cpu_die(unsigned int cpu)
 381 {
 382 }
 383
 384 void __ref play_dead(void)
 385 {
 386         idle_task_exit();
 387
 388         /* flush data cache */
 389         _dma_cache_wback_inv(0, ~0);
 390
 391         /*
 392          * Wakeup is on SW0 or SW1; disable everything else
 393          * Use BEV !IV (BMIPS_WARM_RESTART_VEC) to avoid the regular Linux
 394          * IRQ handlers; this clears ST0_IE and returns immediately.
 395          */
 396         clear_c0_cause(CAUSEF_IV | C_SW0 | C_SW1);
 397         change_c0_status(
 398                 IE_IRQ5 | bmips_tp1_irqs | IE_SW0 | IE_SW1 | ST0_IE | ST0_BEV,
 399                 IE_SW0 | IE_SW1 | ST0_IE | ST0_BEV);
 400         irq_disable_hazard();
 401
 402         /*
 403          * wait for SW interrupt from bmips_boot_secondary(), then jump
 404          * back to start_secondary()
 405          */
 406         __asm__ __volatile__(
 407         "       wait\n"
 408         "       j       bmips_secondary_reentry\n"
 409         : : : "memory");
 410 }
 411
 412 #endif /* CONFIG_HOTPLUG_CPU */
 413
 414 const struct plat_smp_ops bmips43xx_smp_ops = {
 415         .smp_setup              = bmips_smp_setup,
 416         .prepare_cpus           = bmips_prepare_cpus,
 417         .boot_secondary         = bmips_boot_secondary,
 418         .smp_finish             = bmips_smp_finish,
 419         .init_secondary         = bmips_init_secondary,
 420         .send_ipi_single        = bmips43xx_send_ipi_single,
 421         .send_ipi_mask          = bmips43xx_send_ipi_mask,
 422 #ifdef CONFIG_HOTPLUG_CPU
 423         .cpu_disable            = bmips_cpu_disable,
 424         .cpu_die                = bmips_cpu_die,
 425 #endif
 426 };
 427
 428 const struct plat_smp_ops bmips5000_smp_ops = {
 429         .smp_setup              = bmips_smp_setup,
 430         .prepare_cpus           = bmips_prepare_cpus,
 431         .boot_secondary         = bmips_boot_secondary,
 432         .smp_finish             = bmips_smp_finish,
 433         .init_secondary         = bmips_init_secondary,
 434         .send_ipi_single        = bmips5000_send_ipi_single,
 435         .send_ipi_mask          = bmips5000_send_ipi_mask,
 436 #ifdef CONFIG_HOTPLUG_CPU
 437         .cpu_disable            = bmips_cpu_disable,
 438         .cpu_die                = bmips_cpu_die,
 439 #endif
 440 };
 441
 442 #endif /* CONFIG_SMP */
 443
 444 /***********************************************************************
 445  * BMIPS vector relocation
 446  * This is primarily used for SMP boot, but it is applicable to some
 447  * UP BMIPS systems as well.
 448  ***********************************************************************/
 449
 450 static void bmips_wr_vec(unsigned long dst, char *start, char *end)
 451 {
 452         memcpy((void *)dst, start, end - start);
 453         dma_cache_wback(dst, end - start);
 454         local_flush_icache_range(dst, dst + (end - start));
 455         instruction_hazard();
 456 }
 457
 458 static inline void bmips_nmi_handler_setup(void)
 459 {
 460         bmips_wr_vec(BMIPS_NMI_RESET_VEC, &bmips_reset_nmi_vec,
 461                 &bmips_reset_nmi_vec_end);
 462         bmips_wr_vec(BMIPS_WARM_RESTART_VEC, &bmips_smp_int_vec,
 463                 &bmips_smp_int_vec_end);
 464 }
 465
 466 struct reset_vec_info {
 467         int cpu;
 468         u32 val;
 469 };
 470
 471 static void bmips_set_reset_vec_remote(void *vinfo)
 472 {
 473         struct reset_vec_info *info = vinfo;
 474         int shift = info->cpu & 0x01 ? 16 : 0;
 475         u32 mask = ~(0xffff << shift), val = info->val >> 16;
 476
 477         preempt_disable();
 478         if (smp_processor_id() > 0) {
 479                 smp_call_function_single(0, &bmips_set_reset_vec_remote,
 480                                          info, 1);
 481         } else {
 482                 if (info->cpu & 0x02) {
 483                         /* BMIPS5200 "should" use mask/shift, but it's buggy */
 484                         bmips_write_zscm_reg(0xa0, (val << 16) | val);
 485                         bmips_read_zscm_reg(0xa0);
 486                 } else {
 487                         write_c0_brcm_bootvec((read_c0_brcm_bootvec() & mask) |
 488                                               (val << shift));
 489                 }
 490         }
 491         preempt_enable();
 492 }
 493
 494 static void bmips_set_reset_vec(int cpu, u32 val)
 495 {
 496         struct reset_vec_info info;
 497
 498         if (current_cpu_type() == CPU_BMIPS5000) {
 499                 /* this needs to run from CPU0 (which is always online) */
 500                 info.cpu = cpu;
 501                 info.val = val;
 502                 bmips_set_reset_vec_remote(&info);
 503         } else {
 504                 void __iomem *cbr = BMIPS_GET_CBR();
 505
 506                 if (cpu == 0)
 507                         __raw_writel(val, cbr + BMIPS_RELO_VECTOR_CONTROL_0);
 508                 else {
 509                         if (current_cpu_type() != CPU_BMIPS4380)
 510                                 return;
 511                         __raw_writel(val, cbr + BMIPS_RELO_VECTOR_CONTROL_1);
 512                 }
 513         }
 514         __sync();
 515         back_to_back_c0_hazard();
 516 }
 517
 518 void bmips_ebase_setup(void)
 519 {
 520         unsigned long new_ebase = ebase;
 521
 522         BUG_ON(ebase != CKSEG0);
 523
 524         switch (current_cpu_type()) {
 525         case CPU_BMIPS4350:
 526                 /*
 527                  * BMIPS4350 cannot relocate the normal vectors, but it
 528                  * can relocate the BEV=1 vectors.  So CPU1 starts up at
 529                  * the relocated BEV=1, IV=0 general exception vector @
 530                  * 0xa000_0380.
 531                  *
 532                  * set_uncached_handler() is used here because:
 533                  *  - CPU1 will run this from uncached space
 534                  *  - None of the cacheflush functions are set up yet
 535                  */
 536                 set_uncached_handler(BMIPS_WARM_RESTART_VEC - CKSEG0,
 537                         &bmips_smp_int_vec, 0x80);
 538                 __sync();
 539                 return;
 540         case CPU_BMIPS3300:
 541         case CPU_BMIPS4380:
 542                 /*
 543                  * 0x8000_0000: reset/NMI (initially in kseg1)
 544                  * 0x8000_0400: normal vectors
 545                  */
 546                 new_ebase = 0x80000400;
 547                 bmips_set_reset_vec(0, RESET_FROM_KSEG0);
 548                 break;
 549         case CPU_BMIPS5000:
 550                 /*
 551                  * 0x8000_0000: reset/NMI (initially in kseg1)
 552                  * 0x8000_1000: normal vectors
 553                  */
 554                 new_ebase = 0x80001000;
 555                 bmips_set_reset_vec(0, RESET_FROM_KSEG0);
 556                 write_c0_ebase(new_ebase);
 557                 break;
 558         default:
 559                 return;
 560         }
 561
 562         board_nmi_handler_setup = &bmips_nmi_handler_setup;
 563         ebase = new_ebase;
 564 }
 565
 566 asmlinkage void __weak plat_wired_tlb_setup(void)
 567 {
 568         /*
 569          * Called when starting/restarting a secondary CPU.
 570          * Kernel stacks and other important data might only be accessible
 571          * once the wired entries are present.
 572          */
 573 }
 574
 575 void bmips_cpu_setup(void)
 576 {
 577         void __iomem __maybe_unused *cbr = BMIPS_GET_CBR();
 578         u32 __maybe_unused cfg;
 579
 580         switch (current_cpu_type()) {
 581         case CPU_BMIPS3300:
 582                 /* Set BIU to async mode */
 583                 set_c0_brcm_bus_pll(BIT(22));
 584                 __sync();
 585
 586                 /* put the BIU back in sync mode */
 587                 clear_c0_brcm_bus_pll(BIT(22));
 588
 589                 /* clear BHTD to enable branch history table */
 590                 clear_c0_brcm_reset(BIT(16));
 591
 592                 /* Flush and enable RAC */
 593                 cfg = __raw_readl(cbr + BMIPS_RAC_CONFIG);
 594                 __raw_writel(cfg | 0x100, cbr + BMIPS_RAC_CONFIG);
 595                 __raw_readl(cbr + BMIPS_RAC_CONFIG);
 596
 597                 cfg = __raw_readl(cbr + BMIPS_RAC_CONFIG);
 598                 __raw_writel(cfg | 0xf, cbr + BMIPS_RAC_CONFIG);
 599                 __raw_readl(cbr + BMIPS_RAC_CONFIG);
 600
 601                 cfg = __raw_readl(cbr + BMIPS_RAC_ADDRESS_RANGE);
 602                 __raw_writel(cfg | 0x0fff0000, cbr + BMIPS_RAC_ADDRESS_RANGE);
 603                 __raw_readl(cbr + BMIPS_RAC_ADDRESS_RANGE);
 604                 break;
 605
 606         case CPU_BMIPS4380:
 607                 /* CBG workaround for early BMIPS4380 CPUs */
 608                 switch (read_c0_prid()) {
 609                 case 0x2a040:
 610                 case 0x2a042:
 611                 case 0x2a044:
 612                 case 0x2a060:
 613                         cfg = __raw_readl(cbr + BMIPS_L2_CONFIG);
 614                         __raw_writel(cfg & ~0x07000000, cbr + BMIPS_L2_CONFIG);
 615                         __raw_readl(cbr + BMIPS_L2_CONFIG);
 616                 }
 617
 618                 /* clear BHTD to enable branch history table */
 619                 clear_c0_brcm_config_0(BIT(21));
 620
 621                 /* XI/ROTR enable */
 622                 set_c0_brcm_config_0(BIT(23));
 623                 set_c0_brcm_cmt_ctrl(BIT(15));
 624                 break;
 625
 626         case CPU_BMIPS5000:
 627                 /* enable RDHWR, BRDHWR */
 628                 set_c0_brcm_config(BIT(17) | BIT(21));
 629
 630                 /* Disable JTB */
 631                 __asm__ __volatile__(
 632                 "       .set    noreorder\n"
 633                 "       li      $8, 0x5a455048\n"
 634                 "       .word   0x4088b00f\n"   /* mtc0 t0, $22, 15 */
 635                 "       .word   0x4008b008\n"   /* mfc0 t0, $22, 8 */
 636                 "       li      $9, 0x00008000\n"
 637                 "       or      $8, $8, $9\n"
 638                 "       .word   0x4088b008\n"   /* mtc0 t0, $22, 8 */
 639                 "       sync\n"
 640                 "       li      $8, 0x0\n"
 641                 "       .word   0x4088b00f\n"   /* mtc0 t0, $22, 15 */
 642                 "       .set    reorder\n"
 643                 : : : "$8", "$9");
 644
 645                 /* XI enable */
 646                 set_c0_brcm_config(BIT(27));
 647
 648                 /* enable MIPS32R2 ROR instruction for XI TLB handlers */
 649                 __asm__ __volatile__(
 650                 "       li      $8, 0x5a455048\n"
 651                 "       .word   0x4088b00f\n"   /* mtc0 $8, $22, 15 */
 652                 "       nop; nop; nop\n"
 653                 "       .word   0x4008b008\n"   /* mfc0 $8, $22, 8 */
 654                 "       lui     $9, 0x0100\n"
 655                 "       or      $8, $9\n"
 656                 "       .word   0x4088b008\n"   /* mtc0 $8, $22, 8 */
 657                 : : : "$8", "$9");
 658                 break;
 659         }
 660 }