drivers/atm/solos-pci.c

   1 // SPDX-License-Identifier: GPL-2.0-only
   2 /*
   3  * Driver for the Solos PCI ADSL2+ card, designed to support Linux by
   4  *  Traverse Technologies -- http://www.traverse.com.au/
   5  *  Xrio Limited          -- http://www.xrio.com/
   6  *
   7  * Copyright © 2008 Traverse Technologies
   8  * Copyright © 2008 Intel Corporation
   9  *
  10  * Authors: Nathan Williams <[email protected]>
  11  *          David Woodhouse <[email protected]>
  12  *          Treker Chen <[email protected]>
  13  */
  14
  15 #define DEBUG
  16 #define VERBOSE_DEBUG
  17
  18 #include <linux/interrupt.h>
  19 #include <linux/module.h>
  20 #include <linux/kernel.h>
  21 #include <linux/errno.h>
  22 #include <linux/ioport.h>
  23 #include <linux/types.h>
  24 #include <linux/pci.h>
  25 #include <linux/atm.h>
  26 #include <linux/atmdev.h>
  27 #include <linux/skbuff.h>
  28 #include <linux/sysfs.h>
  29 #include <linux/device.h>
  30 #include <linux/kobject.h>
  31 #include <linux/firmware.h>
  32 #include <linux/ctype.h>
  33 #include <linux/swab.h>
  34 #include <linux/slab.h>
  35
  36 #define VERSION "1.04"
  37 #define DRIVER_VERSION 0x01
  38 #define PTAG "solos-pci"
  39
  40 #define CONFIG_RAM_SIZE 128
  41 #define FLAGS_ADDR      0x7C
  42 #define IRQ_EN_ADDR     0x78
  43 #define FPGA_VER        0x74
  44 #define IRQ_CLEAR       0x70
  45 #define WRITE_FLASH     0x6C
  46 #define PORTS           0x68
  47 #define FLASH_BLOCK     0x64
  48 #define FLASH_BUSY      0x60
  49 #define FPGA_MODE       0x5C
  50 #define FLASH_MODE      0x58
  51 #define GPIO_STATUS     0x54
  52 #define DRIVER_VER      0x50
  53 #define TX_DMA_ADDR(port)       (0x40 + (4 * (port)))
  54 #define RX_DMA_ADDR(port)       (0x30 + (4 * (port)))
  55
  56 #define DATA_RAM_SIZE   32768
  57 #define BUF_SIZE        2048
  58 #define OLD_BUF_SIZE    4096 /* For FPGA versions <= 2*/
  59 /* Old boards use ATMEL AD45DB161D flash */
  60 #define ATMEL_FPGA_PAGE 528 /* FPGA flash page size*/
  61 #define ATMEL_SOLOS_PAGE        512 /* Solos flash page size*/
  62 #define ATMEL_FPGA_BLOCK        (ATMEL_FPGA_PAGE * 8) /* FPGA block size*/
  63 #define ATMEL_SOLOS_BLOCK       (ATMEL_SOLOS_PAGE * 8) /* Solos block size*/
  64 /* Current boards use M25P/M25PE SPI flash */
  65 #define SPI_FLASH_BLOCK (256 * 64)
  66
  67 #define RX_BUF(card, nr) ((card->buffers) + (nr)*(card->buffer_size)*2)
  68 #define TX_BUF(card, nr) ((card->buffers) + (nr)*(card->buffer_size)*2 + (card->buffer_size))
  69 #define FLASH_BUF ((card->buffers) + 4*(card->buffer_size)*2)
  70
  71 #define RX_DMA_SIZE     2048
  72
  73 #define FPGA_VERSION(a,b) (((a) << 8) + (b))
  74 #define LEGACY_BUFFERS  2
  75 #define DMA_SUPPORTED   4
  76
  77 static int reset = 0;
  78 static int atmdebug = 0;
  79 static int firmware_upgrade = 0;
  80 static int fpga_upgrade = 0;
  81 static int db_firmware_upgrade = 0;
  82 static int db_fpga_upgrade = 0;
  83
  84 struct pkt_hdr {
  85         __le16 size;
  86         __le16 vpi;
  87         __le16 vci;
  88         __le16 type;
  89 };
  90
  91 struct solos_skb_cb {
  92         struct atm_vcc *vcc;
  93         uint32_t dma_addr;
  94 };
  95
  96
  97 #define SKB_CB(skb)             ((struct solos_skb_cb *)skb->cb)
  98
  99 #define PKT_DATA        0
 100 #define PKT_COMMAND     1
 101 #define PKT_POPEN       3
 102 #define PKT_PCLOSE      4
 103 #define PKT_STATUS      5
 104
 105 struct solos_card {
 106         void __iomem *config_regs;
 107         void __iomem *buffers;
 108         int nr_ports;
 109         int tx_mask;
 110         struct pci_dev *dev;
 111         struct atm_dev *atmdev[4];
 112         struct tasklet_struct tlet;
 113         spinlock_t tx_lock;
 114         spinlock_t tx_queue_lock;
 115         spinlock_t cli_queue_lock;
 116         spinlock_t param_queue_lock;
 117         struct list_head param_queue;
 118         struct sk_buff_head tx_queue[4];
 119         struct sk_buff_head cli_queue[4];
 120         struct sk_buff *tx_skb[4];
 121         struct sk_buff *rx_skb[4];
 122         unsigned char *dma_bounce;
 123         wait_queue_head_t param_wq;
 124         wait_queue_head_t fw_wq;
 125         int using_dma;
 126         int dma_alignment;
 127         int fpga_version;
 128         int buffer_size;
 129         int atmel_flash;
 130 };
 131
 132
 133 struct solos_param {
 134         struct list_head list;
 135         pid_t pid;
 136         int port;
 137         struct sk_buff *response;
 138 };
 139
 140 #define SOLOS_CHAN(atmdev) ((int)(unsigned long)(atmdev)->phy_data)
 141
 142 MODULE_AUTHOR("Traverse Technologies <[email protected]>");
 143 MODULE_DESCRIPTION("Solos PCI driver");
 144 MODULE_VERSION(VERSION);
 145 MODULE_LICENSE("GPL");
 146 MODULE_FIRMWARE("solos-FPGA.bin");
 147 MODULE_FIRMWARE("solos-Firmware.bin");
 148 MODULE_FIRMWARE("solos-db-FPGA.bin");
 149 MODULE_PARM_DESC(reset, "Reset Solos chips on startup");
 150 MODULE_PARM_DESC(atmdebug, "Print ATM data");
 151 MODULE_PARM_DESC(firmware_upgrade, "Initiate Solos firmware upgrade");
 152 MODULE_PARM_DESC(fpga_upgrade, "Initiate FPGA upgrade");
 153 MODULE_PARM_DESC(db_firmware_upgrade, "Initiate daughter board Solos firmware upgrade");
 154 MODULE_PARM_DESC(db_fpga_upgrade, "Initiate daughter board FPGA upgrade");
 155 module_param(reset, int, 0444);
 156 module_param(atmdebug, int, 0644);
 157 module_param(firmware_upgrade, int, 0444);
 158 module_param(fpga_upgrade, int, 0444);
 159 module_param(db_firmware_upgrade, int, 0444);
 160 module_param(db_fpga_upgrade, int, 0444);
 161
 162 static void fpga_queue(struct solos_card *card, int port, struct sk_buff *skb,
 163                        struct atm_vcc *vcc);
 164 static uint32_t fpga_tx(struct solos_card *);
 165 static irqreturn_t solos_irq(int irq, void *dev_id);
 166 static struct atm_vcc* find_vcc(struct atm_dev *dev, short vpi, int vci);
 167 static int atm_init(struct solos_card *, struct device *);
 168 static void atm_remove(struct solos_card *);
 169 static int send_command(struct solos_card *card, int dev, const char *buf, size_t size);
 170 static void solos_bh(unsigned long);
 171 static int print_buffer(struct sk_buff *buf);
 172
 173 static inline void solos_pop(struct atm_vcc *vcc, struct sk_buff *skb)
 174 {
 175         if (vcc->pop)
 176                 vcc->pop(vcc, skb);
 177         else
 178                 dev_kfree_skb_any(skb);
 179 }
 180
 181 static ssize_t solos_param_show(struct device *dev, struct device_attribute *attr,
 182                                 char *buf)
 183 {
 184         struct atm_dev *atmdev = container_of(dev, struct atm_dev, class_dev);
 185         struct solos_card *card = atmdev->dev_data;
 186         struct solos_param prm;
 187         struct sk_buff *skb;
 188         struct pkt_hdr *header;
 189         int buflen;
 190
 191         buflen = strlen(attr->attr.name) + 10;
 192
 193         skb = alloc_skb(sizeof(*header) + buflen, GFP_KERNEL);
 194         if (!skb) {
 195                 dev_warn(&card->dev->dev, "Failed to allocate sk_buff in solos_param_show()\n");
 196                 return -ENOMEM;
 197         }
 198
 199         header = skb_put(skb, sizeof(*header));
 200
 201         buflen = snprintf((void *)&header[1], buflen - 1,
 202                           "L%05d\n%s\n", current->pid, attr->attr.name);
 203         skb_put(skb, buflen);
 204
 205         header->size = cpu_to_le16(buflen);
 206         header->vpi = cpu_to_le16(0);
 207         header->vci = cpu_to_le16(0);
 208         header->type = cpu_to_le16(PKT_COMMAND);
 209
 210         prm.pid = current->pid;
 211         prm.response = NULL;
 212         prm.port = SOLOS_CHAN(atmdev);
 213
 214         spin_lock_irq(&card->param_queue_lock);
 215         list_add(&prm.list, &card->param_queue);
 216         spin_unlock_irq(&card->param_queue_lock);
 217
 218         fpga_queue(card, prm.port, skb, NULL);
 219
 220         wait_event_timeout(card->param_wq, prm.response, 5 * HZ);
 221
 222         spin_lock_irq(&card->param_queue_lock);
 223         list_del(&prm.list);
 224         spin_unlock_irq(&card->param_queue_lock);
 225
 226         if (!prm.response)
 227                 return -EIO;
 228
 229         buflen = prm.response->len;
 230         memcpy(buf, prm.response->data, buflen);
 231         kfree_skb(prm.response);
 232
 233         return buflen;
 234 }
 235
 236 static ssize_t solos_param_store(struct device *dev, struct device_attribute *attr,
 237                                  const char *buf, size_t count)
 238 {
 239         struct atm_dev *atmdev = container_of(dev, struct atm_dev, class_dev);
 240         struct solos_card *card = atmdev->dev_data;
 241         struct solos_param prm;
 242         struct sk_buff *skb;
 243         struct pkt_hdr *header;
 244         int buflen;
 245         ssize_t ret;
 246
 247         buflen = strlen(attr->attr.name) + 11 + count;
 248
 249         skb = alloc_skb(sizeof(*header) + buflen, GFP_KERNEL);
 250         if (!skb) {
 251                 dev_warn(&card->dev->dev, "Failed to allocate sk_buff in solos_param_store()\n");
 252                 return -ENOMEM;
 253         }
 254
 255         header = skb_put(skb, sizeof(*header));
 256
 257         buflen = snprintf((void *)&header[1], buflen - 1,
 258                           "L%05d\n%s\n%s\n", current->pid, attr->attr.name, buf);
 259
 260         skb_put(skb, buflen);
 261         header->size = cpu_to_le16(buflen);
 262         header->vpi = cpu_to_le16(0);
 263         header->vci = cpu_to_le16(0);
 264         header->type = cpu_to_le16(PKT_COMMAND);
 265
 266         prm.pid = current->pid;
 267         prm.response = NULL;
 268         prm.port = SOLOS_CHAN(atmdev);
 269
 270         spin_lock_irq(&card->param_queue_lock);
 271         list_add(&prm.list, &card->param_queue);
 272         spin_unlock_irq(&card->param_queue_lock);
 273
 274         fpga_queue(card, prm.port, skb, NULL);
 275
 276         wait_event_timeout(card->param_wq, prm.response, 5 * HZ);
 277
 278         spin_lock_irq(&card->param_queue_lock);
 279         list_del(&prm.list);
 280         spin_unlock_irq(&card->param_queue_lock);
 281
 282         skb = prm.response;
 283
 284         if (!skb)
 285                 return -EIO;
 286
 287         buflen = skb->len;
 288
 289         /* Sometimes it has a newline, sometimes it doesn't. */
 290         if (skb->data[buflen - 1] == '\n')
 291                 buflen--;
 292
 293         if (buflen == 2 && !strncmp(skb->data, "OK", 2))
 294                 ret = count;
 295         else if (buflen == 5 && !strncmp(skb->data, "ERROR", 5))
 296                 ret = -EIO;
 297         else {
 298                 /* We know we have enough space allocated for this; we allocated
 299                    it ourselves */
 300                 skb->data[buflen] = 0;
 301
 302                 dev_warn(&card->dev->dev, "Unexpected parameter response: '%s'\n",
 303                          skb->data);
 304                 ret = -EIO;
 305         }
 306         kfree_skb(skb);
 307
 308         return ret;
 309 }
 310
 311 static char *next_string(struct sk_buff *skb)
 312 {
 313         int i = 0;
 314         char *this = skb->data;
 315
 316         for (i = 0; i < skb->len; i++) {
 317                 if (this[i] == '\n') {
 318                         this[i] = 0;
 319                         skb_pull(skb, i + 1);
 320                         return this;
 321                 }
 322                 if (!isprint(this[i]))
 323                         return NULL;
 324         }
 325         return NULL;
 326 }
 327
 328 /*
 329  * Status packet has fields separated by \n, starting with a version number
 330  * for the information therein. Fields are....
 331  *
 332  *     packet version
 333  *     RxBitRate        (version >= 1)
 334  *     TxBitRate        (version >= 1)
 335  *     State            (version >= 1)
 336  *     LocalSNRMargin   (version >= 1)
 337  *     LocalLineAttn    (version >= 1)
 338  */
 339 static int process_status(struct solos_card *card, int port, struct sk_buff *skb)
 340 {
 341         char *str, *state_str, *snr, *attn;
 342         int ver, rate_up, rate_down, err;
 343
 344         if (!card->atmdev[port])
 345                 return -ENODEV;
 346
 347         str = next_string(skb);
 348         if (!str)
 349                 return -EIO;
 350
 351         err = kstrtoint(str, 10, &ver);
 352         if (err) {
 353                 dev_warn(&card->dev->dev, "Unexpected status interrupt version\n");
 354                 return err;
 355         }
 356         if (ver < 1) {
 357                 dev_warn(&card->dev->dev, "Unexpected status interrupt version %d\n",
 358                          ver);
 359                 return -EIO;
 360         }
 361
 362         str = next_string(skb);
 363         if (!str)
 364                 return -EIO;
 365         if (!strcmp(str, "ERROR")) {
 366                 dev_dbg(&card->dev->dev, "Status packet indicated Solos error on port %d (starting up?)\n",
 367                          port);
 368                 return 0;
 369         }
 370
 371         err = kstrtoint(str, 10, &rate_down);
 372         if (err)
 373                 return err;
 374
 375         str = next_string(skb);
 376         if (!str)
 377                 return -EIO;
 378         err = kstrtoint(str, 10, &rate_up);
 379         if (err)
 380                 return err;
 381
 382         state_str = next_string(skb);
 383         if (!state_str)
 384                 return -EIO;
 385
 386         /* Anything but 'Showtime' is down */
 387         if (strcmp(state_str, "Showtime")) {
 388                 atm_dev_signal_change(card->atmdev[port], ATM_PHY_SIG_LOST);
 389                 dev_info(&card->dev->dev, "Port %d: %s\n", port, state_str);
 390                 return 0;
 391         }
 392
 393         snr = next_string(skb);
 394         if (!snr)
 395                 return -EIO;
 396         attn = next_string(skb);
 397         if (!attn)
 398                 return -EIO;
 399
 400         dev_info(&card->dev->dev, "Port %d: %s @%d/%d kb/s%s%s%s%s\n",
 401                  port, state_str, rate_down/1000, rate_up/1000,
 402                  snr[0]?", SNR ":"", snr, attn[0]?", Attn ":"", attn);
 403
 404         card->atmdev[port]->link_rate = rate_down / 424;
 405         atm_dev_signal_change(card->atmdev[port], ATM_PHY_SIG_FOUND);
 406
 407         return 0;
 408 }
 409
 410 static int process_command(struct solos_card *card, int port, struct sk_buff *skb)
 411 {
 412         struct solos_param *prm;
 413         unsigned long flags;
 414         int cmdpid;
 415         int found = 0, err;
 416
 417         if (skb->len < 7)
 418                 return 0;
 419
 420         if (skb->data[0] != 'L'    || !isdigit(skb->data[1]) ||
 421             !isdigit(skb->data[2]) || !isdigit(skb->data[3]) ||
 422             !isdigit(skb->data[4]) || !isdigit(skb->data[5]) ||
 423             skb->data[6] != '\n')
 424                 return 0;
 425
 426         err = kstrtoint(&skb->data[1], 10, &cmdpid);
 427         if (err)
 428                 return err;
 429
 430         spin_lock_irqsave(&card->param_queue_lock, flags);
 431         list_for_each_entry(prm, &card->param_queue, list) {
 432                 if (prm->port == port && prm->pid == cmdpid) {
 433                         prm->response = skb;
 434                         skb_pull(skb, 7);
 435                         wake_up(&card->param_wq);
 436                         found = 1;
 437                         break;
 438                 }
 439         }
 440         spin_unlock_irqrestore(&card->param_queue_lock, flags);
 441         return found;
 442 }
 443
 444 static ssize_t console_show(struct device *dev, struct device_attribute *attr,
 445                             char *buf)
 446 {
 447         struct atm_dev *atmdev = container_of(dev, struct atm_dev, class_dev);
 448         struct solos_card *card = atmdev->dev_data;
 449         struct sk_buff *skb;
 450         unsigned int len;
 451
 452         spin_lock(&card->cli_queue_lock);
 453         skb = skb_dequeue(&card->cli_queue[SOLOS_CHAN(atmdev)]);
 454         spin_unlock(&card->cli_queue_lock);
 455         if(skb == NULL)
 456                 return sprintf(buf, "No data.\n");
 457
 458         len = skb->len;
 459         memcpy(buf, skb->data, len);
 460
 461         kfree_skb(skb);
 462         return len;
 463 }
 464
 465 static int send_command(struct solos_card *card, int dev, const char *buf, size_t size)
 466 {
 467         struct sk_buff *skb;
 468         struct pkt_hdr *header;
 469
 470         if (size > (BUF_SIZE - sizeof(*header))) {
 471                 dev_dbg(&card->dev->dev, "Command is too big.  Dropping request\n");
 472                 return 0;
 473         }
 474         skb = alloc_skb(size + sizeof(*header), GFP_ATOMIC);
 475         if (!skb) {
 476                 dev_warn(&card->dev->dev, "Failed to allocate sk_buff in send_command()\n");
 477                 return 0;
 478         }
 479
 480         header = skb_put(skb, sizeof(*header));
 481
 482         header->size = cpu_to_le16(size);
 483         header->vpi = cpu_to_le16(0);
 484         header->vci = cpu_to_le16(0);
 485         header->type = cpu_to_le16(PKT_COMMAND);
 486
 487         skb_put_data(skb, buf, size);
 488
 489         fpga_queue(card, dev, skb, NULL);
 490
 491         return 0;
 492 }
 493
 494 static ssize_t console_store(struct device *dev, struct device_attribute *attr,
 495                              const char *buf, size_t count)
 496 {
 497         struct atm_dev *atmdev = container_of(dev, struct atm_dev, class_dev);
 498         struct solos_card *card = atmdev->dev_data;
 499         int err;
 500
 501         err = send_command(card, SOLOS_CHAN(atmdev), buf, count);
 502
 503         return err?:count;
 504 }
 505
 506 struct geos_gpio_attr {
 507         struct device_attribute attr;
 508         int offset;
 509 };
 510
 511 #define SOLOS_GPIO_ATTR(_name, _mode, _show, _store, _offset)   \
 512         struct geos_gpio_attr gpio_attr_##_name = {             \
 513                 .attr = __ATTR(_name, _mode, _show, _store),    \
 514                 .offset = _offset }
 515
 516 static ssize_t geos_gpio_store(struct device *dev, struct device_attribute *attr,
 517                                const char *buf, size_t count)
 518 {
 519         struct pci_dev *pdev = to_pci_dev(dev);
 520         struct geos_gpio_attr *gattr = container_of(attr, struct geos_gpio_attr, attr);
 521         struct solos_card *card = pci_get_drvdata(pdev);
 522         uint32_t data32;
 523
 524         if (count != 1 && (count != 2 || buf[1] != '\n'))
 525                 return -EINVAL;
 526
 527         spin_lock_irq(&card->param_queue_lock);
 528         data32 = ioread32(card->config_regs + GPIO_STATUS);
 529         if (buf[0] == '1') {
 530                 data32 |= 1 << gattr->offset;
 531                 iowrite32(data32, card->config_regs + GPIO_STATUS);
 532         } else if (buf[0] == '0') {
 533                 data32 &= ~(1 << gattr->offset);
 534                 iowrite32(data32, card->config_regs + GPIO_STATUS);
 535         } else {
 536                 count = -EINVAL;
 537         }
 538         spin_unlock_irq(&card->param_queue_lock);
 539         return count;
 540 }
 541
 542 static ssize_t geos_gpio_show(struct device *dev, struct device_attribute *attr,
 543                               char *buf)
 544 {
 545         struct pci_dev *pdev = to_pci_dev(dev);
 546         struct geos_gpio_attr *gattr = container_of(attr, struct geos_gpio_attr, attr);
 547         struct solos_card *card = pci_get_drvdata(pdev);
 548         uint32_t data32;
 549
 550         data32 = ioread32(card->config_regs + GPIO_STATUS);
 551         data32 = (data32 >> gattr->offset) & 1;
 552
 553         return sprintf(buf, "%d\n", data32);
 554 }
 555
 556 static ssize_t hardware_show(struct device *dev, struct device_attribute *attr,
 557                              char *buf)
 558 {
 559         struct pci_dev *pdev = to_pci_dev(dev);
 560         struct geos_gpio_attr *gattr = container_of(attr, struct geos_gpio_attr, attr);
 561         struct solos_card *card = pci_get_drvdata(pdev);
 562         uint32_t data32;
 563
 564         data32 = ioread32(card->config_regs + GPIO_STATUS);
 565         switch (gattr->offset) {
 566         case 0:
 567                 /* HardwareVersion */
 568                 data32 = data32 & 0x1F;
 569                 break;
 570         case 1:
 571                 /* HardwareVariant */
 572                 data32 = (data32 >> 5) & 0x0F;
 573                 break;
 574         }
 575         return sprintf(buf, "%d\n", data32);
 576 }
 577
 578 static DEVICE_ATTR_RW(console);
 579
 580
 581 #define SOLOS_ATTR_RO(x) static DEVICE_ATTR(x, 0444, solos_param_show, NULL);
 582 #define SOLOS_ATTR_RW(x) static DEVICE_ATTR(x, 0644, solos_param_show, solos_param_store);
 583
 584 #include "solos-attrlist.c"
 585
 586 static SOLOS_GPIO_ATTR(GPIO1, 0644, geos_gpio_show, geos_gpio_store, 9);
 587 static SOLOS_GPIO_ATTR(GPIO2, 0644, geos_gpio_show, geos_gpio_store, 10);
 588 static SOLOS_GPIO_ATTR(GPIO3, 0644, geos_gpio_show, geos_gpio_store, 11);
 589 static SOLOS_GPIO_ATTR(GPIO4, 0644, geos_gpio_show, geos_gpio_store, 12);
 590 static SOLOS_GPIO_ATTR(GPIO5, 0644, geos_gpio_show, geos_gpio_store, 13);
 591 static SOLOS_GPIO_ATTR(PushButton, 0444, geos_gpio_show, NULL, 14);
 592 static SOLOS_GPIO_ATTR(HardwareVersion, 0444, hardware_show, NULL, 0);
 593 static SOLOS_GPIO_ATTR(HardwareVariant, 0444, hardware_show, NULL, 1);
 594 #undef SOLOS_ATTR_RO
 595 #undef SOLOS_ATTR_RW
 596
 597 #define SOLOS_ATTR_RO(x) &dev_attr_##x.attr,
 598 #define SOLOS_ATTR_RW(x) &dev_attr_##x.attr,
 599
 600 static struct attribute *solos_attrs[] = {
 601 #include "solos-attrlist.c"
 602         NULL
 603 };
 604
 605 static const struct attribute_group solos_attr_group = {
 606         .attrs = solos_attrs,
 607         .name = "parameters",
 608 };
 609
 610 static struct attribute *gpio_attrs[] = {
 611         &gpio_attr_GPIO1.attr.attr,
 612         &gpio_attr_GPIO2.attr.attr,
 613         &gpio_attr_GPIO3.attr.attr,
 614         &gpio_attr_GPIO4.attr.attr,
 615         &gpio_attr_GPIO5.attr.attr,
 616         &gpio_attr_PushButton.attr.attr,
 617         &gpio_attr_HardwareVersion.attr.attr,
 618         &gpio_attr_HardwareVariant.attr.attr,
 619         NULL
 620 };
 621
 622 static const struct attribute_group gpio_attr_group = {
 623         .attrs = gpio_attrs,
 624         .name = "gpio",
 625 };
 626
 627 static int flash_upgrade(struct solos_card *card, int chip)
 628 {
 629         const struct firmware *fw;
 630         const char *fw_name;
 631         int blocksize = 0;
 632         int numblocks = 0;
 633         int offset;
 634
 635         switch (chip) {
 636         case 0:
 637                 fw_name = "solos-FPGA.bin";
 638                 if (card->atmel_flash)
 639                         blocksize = ATMEL_FPGA_BLOCK;
 640                 else
 641                         blocksize = SPI_FLASH_BLOCK;
 642                 break;
 643         case 1:
 644                 fw_name = "solos-Firmware.bin";
 645                 if (card->atmel_flash)
 646                         blocksize = ATMEL_SOLOS_BLOCK;
 647                 else
 648                         blocksize = SPI_FLASH_BLOCK;
 649                 break;
 650         case 2:
 651                 if (card->fpga_version > LEGACY_BUFFERS){
 652                         fw_name = "solos-db-FPGA.bin";
 653                         if (card->atmel_flash)
 654                                 blocksize = ATMEL_FPGA_BLOCK;
 655                         else
 656                                 blocksize = SPI_FLASH_BLOCK;
 657                 } else {
 658                         dev_info(&card->dev->dev, "FPGA version doesn't support"
 659                                         " daughter board upgrades\n");
 660                         return -EPERM;
 661                 }
 662                 break;
 663         case 3:
 664                 if (card->fpga_version > LEGACY_BUFFERS){
 665                         fw_name = "solos-Firmware.bin";
 666                         if (card->atmel_flash)
 667                                 blocksize = ATMEL_SOLOS_BLOCK;
 668                         else
 669                                 blocksize = SPI_FLASH_BLOCK;
 670                 } else {
 671                         dev_info(&card->dev->dev, "FPGA version doesn't support"
 672                                         " daughter board upgrades\n");
 673                         return -EPERM;
 674                 }
 675                 break;
 676         default:
 677                 return -ENODEV;
 678         }
 679
 680         if (request_firmware(&fw, fw_name, &card->dev->dev))
 681                 return -ENOENT;
 682
 683         dev_info(&card->dev->dev, "Flash upgrade starting\n");
 684
 685         /* New FPGAs require driver version before permitting flash upgrades */
 686         iowrite32(DRIVER_VERSION, card->config_regs + DRIVER_VER);
 687
 688         numblocks = fw->size / blocksize;
 689         dev_info(&card->dev->dev, "Firmware size: %zd\n", fw->size);
 690         dev_info(&card->dev->dev, "Number of blocks: %d\n", numblocks);
 691
 692         dev_info(&card->dev->dev, "Changing FPGA to Update mode\n");
 693         iowrite32(1, card->config_regs + FPGA_MODE);
 694         (void) ioread32(card->config_regs + FPGA_MODE);
 695
 696         /* Set mode to Chip Erase */
 697         if(chip == 0 || chip == 2)
 698                 dev_info(&card->dev->dev, "Set FPGA Flash mode to FPGA Chip Erase\n");
 699         if(chip == 1 || chip == 3)
 700                 dev_info(&card->dev->dev, "Set FPGA Flash mode to Solos Chip Erase\n");
 701         iowrite32((chip * 2), card->config_regs + FLASH_MODE);
 702
 703
 704         iowrite32(1, card->config_regs + WRITE_FLASH);
 705         wait_event(card->fw_wq, !ioread32(card->config_regs + FLASH_BUSY));
 706
 707         for (offset = 0; offset < fw->size; offset += blocksize) {
 708                 int i;
 709
 710                 /* Clear write flag */
 711                 iowrite32(0, card->config_regs + WRITE_FLASH);
 712
 713                 /* Set mode to Block Write */
 714                 /* dev_info(&card->dev->dev, "Set FPGA Flash mode to Block Write\n"); */
 715                 iowrite32(((chip * 2) + 1), card->config_regs + FLASH_MODE);
 716
 717                 /* Copy block to buffer, swapping each 16 bits for Atmel flash */
 718                 for(i = 0; i < blocksize; i += 4) {
 719                         uint32_t word;
 720                         if (card->atmel_flash)
 721                                 word = swahb32p((uint32_t *)(fw->data + offset + i));
 722                         else
 723                                 word = *(uint32_t *)(fw->data + offset + i);
 724                         if(card->fpga_version > LEGACY_BUFFERS)
 725                                 iowrite32(word, FLASH_BUF + i);
 726                         else
 727                                 iowrite32(word, RX_BUF(card, 3) + i);
 728                 }
 729
 730                 /* Specify block number and then trigger flash write */
 731                 iowrite32(offset / blocksize, card->config_regs + FLASH_BLOCK);
 732                 iowrite32(1, card->config_regs + WRITE_FLASH);
 733                 wait_event(card->fw_wq, !ioread32(card->config_regs + FLASH_BUSY));
 734         }
 735
 736         release_firmware(fw);
 737         iowrite32(0, card->config_regs + WRITE_FLASH);
 738         iowrite32(0, card->config_regs + FPGA_MODE);
 739         iowrite32(0, card->config_regs + FLASH_MODE);
 740         dev_info(&card->dev->dev, "Returning FPGA to Data mode\n");
 741         return 0;
 742 }
 743
 744 static irqreturn_t solos_irq(int irq, void *dev_id)
 745 {
 746         struct solos_card *card = dev_id;
 747         int handled = 1;
 748
 749         iowrite32(0, card->config_regs + IRQ_CLEAR);
 750
 751         /* If we're up and running, just kick the tasklet to process TX/RX */
 752         if (card->atmdev[0])
 753                 tasklet_schedule(&card->tlet);
 754         else
 755                 wake_up(&card->fw_wq);
 756
 757         return IRQ_RETVAL(handled);
 758 }
 759
 760 static void solos_bh(unsigned long card_arg)
 761 {
 762         struct solos_card *card = (void *)card_arg;
 763         uint32_t card_flags;
 764         uint32_t rx_done = 0;
 765         int port;
 766
 767         /*
 768          * Since fpga_tx() is going to need to read the flags under its lock,
 769          * it can return them to us so that we don't have to hit PCI MMIO
 770          * again for the same information
 771          */
 772         card_flags = fpga_tx(card);
 773
 774         for (port = 0; port < card->nr_ports; port++) {
 775                 if (card_flags & (0x10 << port)) {
 776                         struct pkt_hdr _hdr, *header;
 777                         struct sk_buff *skb;
 778                         struct atm_vcc *vcc;
 779                         int size;
 780
 781                         if (card->using_dma) {
 782                                 skb = card->rx_skb[port];
 783                                 card->rx_skb[port] = NULL;
 784
 785                                 dma_unmap_single(&card->dev->dev, SKB_CB(skb)->dma_addr,
 786                                                  RX_DMA_SIZE, DMA_FROM_DEVICE);
 787
 788                                 header = (void *)skb->data;
 789                                 size = le16_to_cpu(header->size);
 790                                 skb_put(skb, size + sizeof(*header));
 791                                 skb_pull(skb, sizeof(*header));
 792                         } else {
 793                                 header = &_hdr;
 794
 795                                 rx_done |= 0x10 << port;
 796
 797                                 memcpy_fromio(header, RX_BUF(card, port), sizeof(*header));
 798
 799                                 size = le16_to_cpu(header->size);
 800                                 if (size > (card->buffer_size - sizeof(*header))){
 801                                         dev_warn(&card->dev->dev, "Invalid buffer size\n");
 802                                         continue;
 803                                 }
 804
 805                                 /* Use netdev_alloc_skb() because it adds NET_SKB_PAD of
 806                                  * headroom, and ensures we can route packets back out an
 807                                  * Ethernet interface (for example) without having to
 808                                  * reallocate. Adding NET_IP_ALIGN also ensures that both
 809                                  * PPPoATM and PPPoEoBR2684 packets end up aligned. */
 810                                 skb = netdev_alloc_skb_ip_align(NULL, size + 1);
 811                                 if (!skb) {
 812                                         if (net_ratelimit())
 813                                                 dev_warn(&card->dev->dev, "Failed to allocate sk_buff for RX\n");
 814                                         continue;
 815                                 }
 816
 817                                 memcpy_fromio(skb_put(skb, size),
 818                                               RX_BUF(card, port) + sizeof(*header),
 819                                               size);
 820                         }
 821                         if (atmdebug) {
 822                                 dev_info(&card->dev->dev, "Received: port %d\n", port);
 823                                 dev_info(&card->dev->dev, "size: %d VPI: %d VCI: %d\n",
 824                                          size, le16_to_cpu(header->vpi),
 825                                          le16_to_cpu(header->vci));
 826                                 print_buffer(skb);
 827                         }
 828
 829                         switch (le16_to_cpu(header->type)) {
 830                         case PKT_DATA:
 831                                 vcc = find_vcc(card->atmdev[port], le16_to_cpu(header->vpi),
 832                                                le16_to_cpu(header->vci));
 833                                 if (!vcc) {
 834                                         if (net_ratelimit())
 835                                                 dev_warn(&card->dev->dev, "Received packet for unknown VPI.VCI %d.%d on port %d\n",
 836                                                          le16_to_cpu(header->vpi), le16_to_cpu(header->vci),
 837                                                          port);
 838                                         dev_kfree_skb_any(skb);
 839                                         break;
 840                                 }
 841                                 atm_charge(vcc, skb->truesize);
 842                                 vcc->push(vcc, skb);
 843                                 atomic_inc(&vcc->stats->rx);
 844                                 break;
 845
 846                         case PKT_STATUS:
 847                                 if (process_status(card, port, skb) &&
 848                                     net_ratelimit()) {
 849                                         dev_warn(&card->dev->dev, "Bad status packet of %d bytes on port %d:\n", skb->len, port);
 850                                         print_buffer(skb);
 851                                 }
 852                                 dev_kfree_skb_any(skb);
 853                                 break;
 854
 855                         case PKT_COMMAND:
 856                         default: /* FIXME: Not really, surely? */
 857                                 if (process_command(card, port, skb))
 858                                         break;
 859                                 spin_lock(&card->cli_queue_lock);
 860                                 if (skb_queue_len(&card->cli_queue[port]) > 10) {
 861                                         if (net_ratelimit())
 862                                                 dev_warn(&card->dev->dev, "Dropping console response on port %d\n",
 863                                                          port);
 864                                         dev_kfree_skb_any(skb);
 865                                 } else
 866                                         skb_queue_tail(&card->cli_queue[port], skb);
 867                                 spin_unlock(&card->cli_queue_lock);
 868                                 break;
 869                         }
 870                 }
 871                 /* Allocate RX skbs for any ports which need them */
 872                 if (card->using_dma && card->atmdev[port] &&
 873                     !card->rx_skb[port]) {
 874                         /* Unlike the MMIO case (qv) we can't add NET_IP_ALIGN
 875                          * here; the FPGA can only DMA to addresses which are
 876                          * aligned to 4 bytes. */
 877                         struct sk_buff *skb = dev_alloc_skb(RX_DMA_SIZE);
 878                         if (skb) {
 879                                 SKB_CB(skb)->dma_addr =
 880                                         dma_map_single(&card->dev->dev, skb->data,
 881                                                        RX_DMA_SIZE, DMA_FROM_DEVICE);
 882                                 iowrite32(SKB_CB(skb)->dma_addr,
 883                                           card->config_regs + RX_DMA_ADDR(port));
 884                                 card->rx_skb[port] = skb;
 885                         } else {
 886                                 if (net_ratelimit())
 887                                         dev_warn(&card->dev->dev, "Failed to allocate RX skb");
 888
 889                                 /* We'll have to try again later */
 890                                 tasklet_schedule(&card->tlet);
 891                         }
 892                 }
 893         }
 894         if (rx_done)
 895                 iowrite32(rx_done, card->config_regs + FLAGS_ADDR);
 896
 897         return;
 898 }
 899
 900 static struct atm_vcc *find_vcc(struct atm_dev *dev, short vpi, int vci)
 901 {
 902         struct hlist_head *head;
 903         struct atm_vcc *vcc = NULL;
 904         struct sock *s;
 905
 906         read_lock(&vcc_sklist_lock);
 907         head = &vcc_hash[vci & (VCC_HTABLE_SIZE -1)];
 908         sk_for_each(s, head) {
 909                 vcc = atm_sk(s);
 910                 if (vcc->dev == dev && vcc->vci == vci &&
 911                     vcc->vpi == vpi && vcc->qos.rxtp.traffic_class != ATM_NONE &&
 912                     test_bit(ATM_VF_READY, &vcc->flags))
 913                         goto out;
 914         }
 915         vcc = NULL;
 916  out:
 917         read_unlock(&vcc_sklist_lock);
 918         return vcc;
 919 }
 920
 921 static int popen(struct atm_vcc *vcc)
 922 {
 923         struct solos_card *card = vcc->dev->dev_data;
 924         struct sk_buff *skb;
 925         struct pkt_hdr *header;
 926
 927         if (vcc->qos.aal != ATM_AAL5) {
 928                 dev_warn(&card->dev->dev, "Unsupported ATM type %d\n",
 929                          vcc->qos.aal);
 930                 return -EINVAL;
 931         }
 932
 933         skb = alloc_skb(sizeof(*header), GFP_KERNEL);
 934         if (!skb) {
 935                 if (net_ratelimit())
 936                         dev_warn(&card->dev->dev, "Failed to allocate sk_buff in popen()\n");
 937                 return -ENOMEM;
 938         }
 939         header = skb_put(skb, sizeof(*header));
 940
 941         header->size = cpu_to_le16(0);
 942         header->vpi = cpu_to_le16(vcc->vpi);
 943         header->vci = cpu_to_le16(vcc->vci);
 944         header->type = cpu_to_le16(PKT_POPEN);
 945
 946         fpga_queue(card, SOLOS_CHAN(vcc->dev), skb, NULL);
 947
 948         set_bit(ATM_VF_ADDR, &vcc->flags);
 949         set_bit(ATM_VF_READY, &vcc->flags);
 950
 951         return 0;
 952 }
 953
 954 static void pclose(struct atm_vcc *vcc)
 955 {
 956         struct solos_card *card = vcc->dev->dev_data;
 957         unsigned char port = SOLOS_CHAN(vcc->dev);
 958         struct sk_buff *skb, *tmpskb;
 959         struct pkt_hdr *header;
 960
 961         /* Remove any yet-to-be-transmitted packets from the pending queue */
 962         spin_lock(&card->tx_queue_lock);
 963         skb_queue_walk_safe(&card->tx_queue[port], skb, tmpskb) {
 964                 if (SKB_CB(skb)->vcc == vcc) {
 965                         skb_unlink(skb, &card->tx_queue[port]);
 966                         solos_pop(vcc, skb);
 967                 }
 968         }
 969         spin_unlock(&card->tx_queue_lock);
 970
 971         skb = alloc_skb(sizeof(*header), GFP_KERNEL);
 972         if (!skb) {
 973                 dev_warn(&card->dev->dev, "Failed to allocate sk_buff in pclose()\n");
 974                 return;
 975         }
 976         header = skb_put(skb, sizeof(*header));
 977
 978         header->size = cpu_to_le16(0);
 979         header->vpi = cpu_to_le16(vcc->vpi);
 980         header->vci = cpu_to_le16(vcc->vci);
 981         header->type = cpu_to_le16(PKT_PCLOSE);
 982
 983         skb_get(skb);
 984         fpga_queue(card, port, skb, NULL);
 985
 986         if (!wait_event_timeout(card->param_wq, !skb_shared(skb), 5 * HZ))
 987                 dev_warn(&card->dev->dev,
 988                          "Timeout waiting for VCC close on port %d\n", port);
 989
 990         dev_kfree_skb(skb);
 991
 992         /* Hold up vcc_destroy_socket() (our caller) until solos_bh() in the
 993            tasklet has finished processing any incoming packets (and, more to
 994            the point, using the vcc pointer). */
 995         tasklet_unlock_wait(&card->tlet);
 996
 997         clear_bit(ATM_VF_ADDR, &vcc->flags);
 998
 999         return;
1000 }
1001
1002 static int print_buffer(struct sk_buff *buf)
1003 {
1004         int len,i;
1005         char msg[500];
1006         char item[10];
1007
1008         len = buf->len;
1009         for (i = 0; i < len; i++){
1010                 if(i % 8 == 0)
1011                         sprintf(msg, "%02X: ", i);
1012
1013                 sprintf(item,"%02X ",*(buf->data + i));
1014                 strcat(msg, item);
1015                 if(i % 8 == 7) {
1016                         sprintf(item, "\n");
1017                         strcat(msg, item);
1018                         printk(KERN_DEBUG "%s", msg);
1019                 }
1020         }
1021         if (i % 8 != 0) {
1022                 sprintf(item, "\n");
1023                 strcat(msg, item);
1024                 printk(KERN_DEBUG "%s", msg);
1025         }
1026         printk(KERN_DEBUG "\n");
1027
1028         return 0;
1029 }
1030
1031 static void fpga_queue(struct solos_card *card, int port, struct sk_buff *skb,
1032                        struct atm_vcc *vcc)
1033 {
1034         int old_len;
1035         unsigned long flags;
1036
1037         SKB_CB(skb)->vcc = vcc;
1038
1039         spin_lock_irqsave(&card->tx_queue_lock, flags);
1040         old_len = skb_queue_len(&card->tx_queue[port]);
1041         skb_queue_tail(&card->tx_queue[port], skb);
1042         if (!old_len)
1043                 card->tx_mask |= (1 << port);
1044         spin_unlock_irqrestore(&card->tx_queue_lock, flags);
1045
1046         /* Theoretically we could just schedule the tasklet here, but
1047            that introduces latency we don't want -- it's noticeable */
1048         if (!old_len)
1049                 fpga_tx(card);
1050 }
1051
1052 static uint32_t fpga_tx(struct solos_card *card)
1053 {
1054         uint32_t tx_pending, card_flags;
1055         uint32_t tx_started = 0;
1056         struct sk_buff *skb;
1057         struct atm_vcc *vcc;
1058         unsigned char port;
1059         unsigned long flags;
1060
1061         spin_lock_irqsave(&card->tx_lock, flags);
1062
1063         card_flags = ioread32(card->config_regs + FLAGS_ADDR);
1064         /*
1065          * The queue lock is required for _writing_ to tx_mask, but we're
1066          * OK to read it here without locking. The only potential update
1067          * that we could race with is in fpga_queue() where it sets a bit
1068          * for a new port... but it's going to call this function again if
1069          * it's doing that, anyway.
1070          */
1071         tx_pending = card->tx_mask & ~card_flags;
1072
1073         for (port = 0; tx_pending; tx_pending >>= 1, port++) {
1074                 if (tx_pending & 1) {
1075                         struct sk_buff *oldskb = card->tx_skb[port];
1076                         if (oldskb) {
1077                                 dma_unmap_single(&card->dev->dev, SKB_CB(oldskb)->dma_addr,
1078                                                  oldskb->len, DMA_TO_DEVICE);
1079                                 card->tx_skb[port] = NULL;
1080                         }
1081                         spin_lock(&card->tx_queue_lock);
1082                         skb = skb_dequeue(&card->tx_queue[port]);
1083                         if (!skb)
1084                                 card->tx_mask &= ~(1 << port);
1085                         spin_unlock(&card->tx_queue_lock);
1086
1087                         if (skb && !card->using_dma) {
1088                                 memcpy_toio(TX_BUF(card, port), skb->data, skb->len);
1089                                 tx_started |= 1 << port;
1090                                 oldskb = skb; /* We're done with this skb already */
1091                         } else if (skb && card->using_dma) {
1092                                 unsigned char *data = skb->data;
1093                                 if ((unsigned long)data & card->dma_alignment) {
1094                                         data = card->dma_bounce + (BUF_SIZE * port);
1095                                         memcpy(data, skb->data, skb->len);
1096                                 }
1097                                 SKB_CB(skb)->dma_addr = dma_map_single(&card->dev->dev, data,
1098                                                                        skb->len, DMA_TO_DEVICE);
1099                                 card->tx_skb[port] = skb;
1100                                 iowrite32(SKB_CB(skb)->dma_addr,
1101                                           card->config_regs + TX_DMA_ADDR(port));
1102                         }
1103
1104                         if (!oldskb)
1105                                 continue;
1106
1107                         /* Clean up and free oldskb now it's gone */
1108                         if (atmdebug) {
1109                                 struct pkt_hdr *header = (void *)oldskb->data;
1110                                 int size = le16_to_cpu(header->size);
1111
1112                                 skb_pull(oldskb, sizeof(*header));
1113                                 dev_info(&card->dev->dev, "Transmitted: port %d\n",
1114                                          port);
1115                                 dev_info(&card->dev->dev, "size: %d VPI: %d VCI: %d\n",
1116                                          size, le16_to_cpu(header->vpi),
1117                                          le16_to_cpu(header->vci));
1118                                 print_buffer(oldskb);
1119                         }
1120
1121                         vcc = SKB_CB(oldskb)->vcc;
1122
1123                         if (vcc) {
1124                                 atomic_inc(&vcc->stats->tx);
1125                                 solos_pop(vcc, oldskb);
1126                         } else {
1127                                 dev_kfree_skb_irq(oldskb);
1128                                 wake_up(&card->param_wq);
1129                         }
1130                 }
1131         }
1132         /* For non-DMA TX, write the 'TX start' bit for all four ports simultaneously */
1133         if (tx_started)
1134                 iowrite32(tx_started, card->config_regs + FLAGS_ADDR);
1135
1136         spin_unlock_irqrestore(&card->tx_lock, flags);
1137         return card_flags;
1138 }
1139
1140 static int psend(struct atm_vcc *vcc, struct sk_buff *skb)
1141 {
1142         struct solos_card *card = vcc->dev->dev_data;
1143         struct pkt_hdr *header;
1144         int pktlen;
1145
1146         pktlen = skb->len;
1147         if (pktlen > (BUF_SIZE - sizeof(*header))) {
1148                 dev_warn(&card->dev->dev, "Length of PDU is too large. Dropping PDU.\n");
1149                 solos_pop(vcc, skb);
1150                 return 0;
1151         }
1152
1153         if (!skb_clone_writable(skb, sizeof(*header))) {
1154                 int expand_by = 0;
1155                 int ret;
1156
1157                 if (skb_headroom(skb) < sizeof(*header))
1158                         expand_by = sizeof(*header) - skb_headroom(skb);
1159
1160                 ret = pskb_expand_head(skb, expand_by, 0, GFP_ATOMIC);
1161                 if (ret) {
1162                         dev_warn(&card->dev->dev, "pskb_expand_head failed.\n");
1163                         solos_pop(vcc, skb);
1164                         return ret;
1165                 }
1166         }
1167
1168         header = skb_push(skb, sizeof(*header));
1169
1170         /* This does _not_ include the size of the header */
1171         header->size = cpu_to_le16(pktlen);
1172         header->vpi = cpu_to_le16(vcc->vpi);
1173         header->vci = cpu_to_le16(vcc->vci);
1174         header->type = cpu_to_le16(PKT_DATA);
1175
1176         fpga_queue(card, SOLOS_CHAN(vcc->dev), skb, vcc);
1177
1178         return 0;
1179 }
1180
1181 static const struct atmdev_ops fpga_ops = {
1182         .open =         popen,
1183         .close =        pclose,
1184         .ioctl =        NULL,
1185         .getsockopt =   NULL,
1186         .setsockopt =   NULL,
1187         .send =         psend,
1188         .send_oam =     NULL,
1189         .phy_put =      NULL,
1190         .phy_get =      NULL,
1191         .change_qos =   NULL,
1192         .proc_read =    NULL,
1193         .owner =        THIS_MODULE
1194 };
1195
1196 static int fpga_probe(struct pci_dev *dev, const struct pci_device_id *id)
1197 {
1198         int err;
1199         uint16_t fpga_ver;
1200         uint8_t major_ver, minor_ver;
1201         uint32_t data32;
1202         struct solos_card *card;
1203
1204         card = kzalloc(sizeof(*card), GFP_KERNEL);
1205         if (!card)
1206                 return -ENOMEM;
1207
1208         card->dev = dev;
1209         init_waitqueue_head(&card->fw_wq);
1210         init_waitqueue_head(&card->param_wq);
1211
1212         err = pci_enable_device(dev);
1213         if (err) {
1214                 dev_warn(&dev->dev,  "Failed to enable PCI device\n");
1215                 goto out;
1216         }
1217
1218         err = dma_set_mask_and_coherent(&dev->dev, DMA_BIT_MASK(32));
1219         if (err) {
1220                 dev_warn(&dev->dev, "Failed to set 32-bit DMA mask\n");
1221                 goto out;
1222         }
1223
1224         err = pci_request_regions(dev, "solos");
1225         if (err) {
1226                 dev_warn(&dev->dev, "Failed to request regions\n");
1227                 goto out;
1228         }
1229
1230         card->config_regs = pci_iomap(dev, 0, CONFIG_RAM_SIZE);
1231         if (!card->config_regs) {
1232                 dev_warn(&dev->dev, "Failed to ioremap config registers\n");
1233                 err = -ENOMEM;
1234                 goto out_release_regions;
1235         }
1236         card->buffers = pci_iomap(dev, 1, DATA_RAM_SIZE);
1237         if (!card->buffers) {
1238                 dev_warn(&dev->dev, "Failed to ioremap data buffers\n");
1239                 err = -ENOMEM;
1240                 goto out_unmap_config;
1241         }
1242
1243         if (reset) {
1244                 iowrite32(1, card->config_regs + FPGA_MODE);
1245                 ioread32(card->config_regs + FPGA_MODE);
1246
1247                 iowrite32(0, card->config_regs + FPGA_MODE);
1248                 ioread32(card->config_regs + FPGA_MODE);
1249         }
1250
1251         data32 = ioread32(card->config_regs + FPGA_VER);
1252         fpga_ver = (data32 & 0x0000FFFF);
1253         major_ver = ((data32 & 0xFF000000) >> 24);
1254         minor_ver = ((data32 & 0x00FF0000) >> 16);
1255         card->fpga_version = FPGA_VERSION(major_ver,minor_ver);
1256         if (card->fpga_version > LEGACY_BUFFERS)
1257                 card->buffer_size = BUF_SIZE;
1258         else
1259                 card->buffer_size = OLD_BUF_SIZE;
1260         dev_info(&dev->dev, "Solos FPGA Version %d.%02d svn-%d\n",
1261                  major_ver, minor_ver, fpga_ver);
1262
1263         if (fpga_ver < 37 && (fpga_upgrade || firmware_upgrade ||
1264                               db_fpga_upgrade || db_firmware_upgrade)) {
1265                 dev_warn(&dev->dev,
1266                          "FPGA too old; cannot upgrade flash. Use JTAG.\n");
1267                 fpga_upgrade = firmware_upgrade = 0;
1268                 db_fpga_upgrade = db_firmware_upgrade = 0;
1269         }
1270
1271         /* Stopped using Atmel flash after 0.03-38 */
1272         if (fpga_ver < 39)
1273                 card->atmel_flash = 1;
1274         else
1275                 card->atmel_flash = 0;
1276
1277         data32 = ioread32(card->config_regs + PORTS);
1278         card->nr_ports = (data32 & 0x000000FF);
1279
1280         if (card->fpga_version >= DMA_SUPPORTED) {
1281                 pci_set_master(dev);
1282                 card->using_dma = 1;
1283                 if (1) { /* All known FPGA versions so far */
1284                         card->dma_alignment = 3;
1285                         card->dma_bounce = kmalloc_array(card->nr_ports,
1286                                                          BUF_SIZE, GFP_KERNEL);
1287                         if (!card->dma_bounce) {
1288                                 dev_warn(&card->dev->dev, "Failed to allocate DMA bounce buffers\n");
1289                                 err = -ENOMEM;
1290                                 /* Fallback to MMIO doesn't work */
1291                                 goto out_unmap_both;
1292                         }
1293                 }
1294         } else {
1295                 card->using_dma = 0;
1296                 /* Set RX empty flag for all ports */
1297                 iowrite32(0xF0, card->config_regs + FLAGS_ADDR);
1298         }
1299
1300         pci_set_drvdata(dev, card);
1301
1302         tasklet_init(&card->tlet, solos_bh, (unsigned long)card);
1303         spin_lock_init(&card->tx_lock);
1304         spin_lock_init(&card->tx_queue_lock);
1305         spin_lock_init(&card->cli_queue_lock);
1306         spin_lock_init(&card->param_queue_lock);
1307         INIT_LIST_HEAD(&card->param_queue);
1308
1309         err = request_irq(dev->irq, solos_irq, IRQF_SHARED,
1310                           "solos-pci", card);
1311         if (err) {
1312                 dev_dbg(&card->dev->dev, "Failed to request interrupt IRQ: %d\n", dev->irq);
1313                 goto out_unmap_both;
1314         }
1315
1316         iowrite32(1, card->config_regs + IRQ_EN_ADDR);
1317
1318         if (fpga_upgrade)
1319                 flash_upgrade(card, 0);
1320
1321         if (firmware_upgrade)
1322                 flash_upgrade(card, 1);
1323
1324         if (db_fpga_upgrade)
1325                 flash_upgrade(card, 2);
1326
1327         if (db_firmware_upgrade)
1328                 flash_upgrade(card, 3);
1329
1330         err = atm_init(card, &dev->dev);
1331         if (err)
1332                 goto out_free_irq;
1333
1334         if (card->fpga_version >= DMA_SUPPORTED &&
1335             sysfs_create_group(&card->dev->dev.kobj, &gpio_attr_group))
1336                 dev_err(&card->dev->dev, "Could not register parameter group for GPIOs\n");
1337
1338         return 0;
1339
1340  out_free_irq:
1341         iowrite32(0, card->config_regs + IRQ_EN_ADDR);
1342         free_irq(dev->irq, card);
1343         tasklet_kill(&card->tlet);
1344
1345  out_unmap_both:
1346         kfree(card->dma_bounce);
1347         pci_iounmap(dev, card->buffers);
1348  out_unmap_config:
1349         pci_iounmap(dev, card->config_regs);
1350  out_release_regions:
1351         pci_release_regions(dev);
1352  out:
1353         kfree(card);
1354         return err;
1355 }
1356
1357 static int atm_init(struct solos_card *card, struct device *parent)
1358 {
1359         int i;
1360
1361         for (i = 0; i < card->nr_ports; i++) {
1362                 struct sk_buff *skb;
1363                 struct pkt_hdr *header;
1364
1365                 skb_queue_head_init(&card->tx_queue[i]);
1366                 skb_queue_head_init(&card->cli_queue[i]);
1367
1368                 card->atmdev[i] = atm_dev_register("solos-pci", parent, &fpga_ops, -1, NULL);
1369                 if (!card->atmdev[i]) {
1370                         dev_err(&card->dev->dev, "Could not register ATM device %d\n", i);
1371                         atm_remove(card);
1372                         return -ENODEV;
1373                 }
1374                 if (device_create_file(&card->atmdev[i]->class_dev, &dev_attr_console))
1375                         dev_err(&card->dev->dev, "Could not register console for ATM device %d\n", i);
1376                 if (sysfs_create_group(&card->atmdev[i]->class_dev.kobj, &solos_attr_group))
1377                         dev_err(&card->dev->dev, "Could not register parameter group for ATM device %d\n", i);
1378
1379                 dev_info(&card->dev->dev, "Registered ATM device %d\n", card->atmdev[i]->number);
1380
1381                 card->atmdev[i]->ci_range.vpi_bits = 8;
1382                 card->atmdev[i]->ci_range.vci_bits = 16;
1383                 card->atmdev[i]->dev_data = card;
1384                 card->atmdev[i]->phy_data = (void *)(unsigned long)i;
1385                 atm_dev_signal_change(card->atmdev[i], ATM_PHY_SIG_FOUND);
1386
1387                 skb = alloc_skb(sizeof(*header), GFP_KERNEL);
1388                 if (!skb) {
1389                         dev_warn(&card->dev->dev, "Failed to allocate sk_buff in atm_init()\n");
1390                         continue;
1391                 }
1392
1393                 header = skb_put(skb, sizeof(*header));
1394
1395                 header->size = cpu_to_le16(0);
1396                 header->vpi = cpu_to_le16(0);
1397                 header->vci = cpu_to_le16(0);
1398                 header->type = cpu_to_le16(PKT_STATUS);
1399
1400                 fpga_queue(card, i, skb, NULL);
1401         }
1402         return 0;
1403 }
1404
1405 static void atm_remove(struct solos_card *card)
1406 {
1407         int i;
1408
1409         for (i = 0; i < card->nr_ports; i++) {
1410                 if (card->atmdev[i]) {
1411                         struct sk_buff *skb;
1412
1413                         dev_info(&card->dev->dev, "Unregistering ATM device %d\n", card->atmdev[i]->number);
1414
1415                         sysfs_remove_group(&card->atmdev[i]->class_dev.kobj, &solos_attr_group);
1416                         atm_dev_deregister(card->atmdev[i]);
1417
1418                         skb = card->rx_skb[i];
1419                         if (skb) {
1420                                 dma_unmap_single(&card->dev->dev, SKB_CB(skb)->dma_addr,
1421                                                  RX_DMA_SIZE, DMA_FROM_DEVICE);
1422                                 dev_kfree_skb(skb);
1423                         }
1424                         skb = card->tx_skb[i];
1425                         if (skb) {
1426                                 dma_unmap_single(&card->dev->dev, SKB_CB(skb)->dma_addr,
1427                                                  skb->len, DMA_TO_DEVICE);
1428                                 dev_kfree_skb(skb);
1429                         }
1430                         while ((skb = skb_dequeue(&card->tx_queue[i])))
1431                                 dev_kfree_skb(skb);
1432
1433                 }
1434         }
1435 }
1436
1437 static void fpga_remove(struct pci_dev *dev)
1438 {
1439         struct solos_card *card = pci_get_drvdata(dev);
1440
1441         /* Disable IRQs */
1442         iowrite32(0, card->config_regs + IRQ_EN_ADDR);
1443
1444         /* Reset FPGA */
1445         iowrite32(1, card->config_regs + FPGA_MODE);
1446         (void)ioread32(card->config_regs + FPGA_MODE);
1447
1448         if (card->fpga_version >= DMA_SUPPORTED)
1449                 sysfs_remove_group(&card->dev->dev.kobj, &gpio_attr_group);
1450
1451         atm_remove(card);
1452
1453         free_irq(dev->irq, card);
1454         tasklet_kill(&card->tlet);
1455
1456         kfree(card->dma_bounce);
1457
1458         /* Release device from reset */
1459         iowrite32(0, card->config_regs + FPGA_MODE);
1460         (void)ioread32(card->config_regs + FPGA_MODE);
1461
1462         pci_iounmap(dev, card->buffers);
1463         pci_iounmap(dev, card->config_regs);
1464
1465         pci_release_regions(dev);
1466         pci_disable_device(dev);
1467
1468         kfree(card);
1469 }
1470
1471 static const struct pci_device_id fpga_pci_tbl[] = {
1472         { 0x10ee, 0x0300, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
1473         { 0, }
1474 };
1475
1476 MODULE_DEVICE_TABLE(pci,fpga_pci_tbl);
1477
1478 static struct pci_driver fpga_driver = {
1479         .name =         "solos",
1480         .id_table =     fpga_pci_tbl,
1481         .probe =        fpga_probe,
1482         .remove =       fpga_remove,
1483 };
1484
1485
1486 static int __init solos_pci_init(void)
1487 {
1488         BUILD_BUG_ON(sizeof(struct solos_skb_cb) > sizeof(((struct sk_buff *)0)->cb));
1489
1490         printk(KERN_INFO "Solos PCI Driver Version %s\n", VERSION);
1491         return pci_register_driver(&fpga_driver);
1492 }
1493
1494 static void __exit solos_pci_exit(void)
1495 {
1496         pci_unregister_driver(&fpga_driver);
1497         printk(KERN_INFO "Solos PCI Driver %s Unloaded\n", VERSION);
1498 }
1499
1500 module_init(solos_pci_init);
1501 module_exit(solos_pci_exit);