1 /* SPDX-License-Identifier: GPL-2.0-or-later */
3 * Universal Flash Storage Host controller driver
4 * Copyright (C) 2011-2013 Samsung India Software Operations
5 * Copyright (c) 2013-2016, The Linux Foundation. All rights reserved.
15 #include <linux/bitfield.h>
16 #include <linux/blk-crypto-profile.h>
17 #include <linux/blk-mq.h>
18 #include <linux/devfreq.h>
19 #include <linux/fault-inject.h>
20 #include <linux/msi.h>
21 #include <linux/pm_runtime.h>
22 #include <linux/dma-direction.h>
23 #include <scsi/scsi_device.h>
24 #include <scsi/scsi_host.h>
25 #include <ufs/unipro.h>
27 #include <ufs/ufs_quirks.h>
28 #include <ufs/ufshci.h>
30 #define UFSHCD "ufshcd"
36 DEV_CMD_TYPE_NOP = 0x0,
37 DEV_CMD_TYPE_QUERY = 0x1,
38 DEV_CMD_TYPE_RPMB = 0x2,
42 /* uic specific errors */
50 UFS_EVT_AUTO_HIBERN8_ERR,
52 UFS_EVT_LINK_STARTUP_FAIL,
67 * struct uic_command - UIC command structure
68 * @command: UIC command
69 * @argument1: UIC command argument 1
70 * @argument2: UIC command argument 2
71 * @argument3: UIC command argument 3
72 * @cmd_active: Indicate if UIC command is outstanding
73 * @done: UIC command completion
81 struct completion done;
84 /* Used to differentiate the power management options */
91 /* Host <-> Device UniPro Link state */
93 UIC_LINK_OFF_STATE = 0, /* Link powered down or disabled */
94 UIC_LINK_ACTIVE_STATE = 1, /* Link is in Fast/Slow/Sleep state */
95 UIC_LINK_HIBERN8_STATE = 2, /* Link is in Hibernate state */
96 UIC_LINK_BROKEN_STATE = 3, /* Link is in broken state */
99 #define ufshcd_is_link_off(hba) ((hba)->uic_link_state == UIC_LINK_OFF_STATE)
100 #define ufshcd_is_link_active(hba) ((hba)->uic_link_state == \
101 UIC_LINK_ACTIVE_STATE)
102 #define ufshcd_is_link_hibern8(hba) ((hba)->uic_link_state == \
103 UIC_LINK_HIBERN8_STATE)
104 #define ufshcd_is_link_broken(hba) ((hba)->uic_link_state == \
105 UIC_LINK_BROKEN_STATE)
106 #define ufshcd_set_link_off(hba) ((hba)->uic_link_state = UIC_LINK_OFF_STATE)
107 #define ufshcd_set_link_active(hba) ((hba)->uic_link_state = \
108 UIC_LINK_ACTIVE_STATE)
109 #define ufshcd_set_link_hibern8(hba) ((hba)->uic_link_state = \
110 UIC_LINK_HIBERN8_STATE)
111 #define ufshcd_set_link_broken(hba) ((hba)->uic_link_state = \
112 UIC_LINK_BROKEN_STATE)
114 #define ufshcd_set_ufs_dev_active(h) \
115 ((h)->curr_dev_pwr_mode = UFS_ACTIVE_PWR_MODE)
116 #define ufshcd_set_ufs_dev_sleep(h) \
117 ((h)->curr_dev_pwr_mode = UFS_SLEEP_PWR_MODE)
118 #define ufshcd_set_ufs_dev_poweroff(h) \
119 ((h)->curr_dev_pwr_mode = UFS_POWERDOWN_PWR_MODE)
120 #define ufshcd_set_ufs_dev_deepsleep(h) \
121 ((h)->curr_dev_pwr_mode = UFS_DEEPSLEEP_PWR_MODE)
122 #define ufshcd_is_ufs_dev_active(h) \
123 ((h)->curr_dev_pwr_mode == UFS_ACTIVE_PWR_MODE)
124 #define ufshcd_is_ufs_dev_sleep(h) \
125 ((h)->curr_dev_pwr_mode == UFS_SLEEP_PWR_MODE)
126 #define ufshcd_is_ufs_dev_poweroff(h) \
127 ((h)->curr_dev_pwr_mode == UFS_POWERDOWN_PWR_MODE)
128 #define ufshcd_is_ufs_dev_deepsleep(h) \
129 ((h)->curr_dev_pwr_mode == UFS_DEEPSLEEP_PWR_MODE)
132 * UFS Power management levels.
133 * Each level is in increasing order of power savings, except DeepSleep
134 * which is lower than PowerDown with power on but not PowerDown with
148 struct ufs_pm_lvl_states {
149 enum ufs_dev_pwr_mode dev_state;
150 enum uic_link_state link_state;
154 * struct ufshcd_lrb - local reference block
155 * @utr_descriptor_ptr: UTRD address of the command
156 * @ucd_req_ptr: UCD address of the command
157 * @ucd_rsp_ptr: Response UPIU address for this command
158 * @ucd_prdt_ptr: PRDT address of the command
159 * @utrd_dma_addr: UTRD dma address for debug
160 * @ucd_prdt_dma_addr: PRDT dma address for debug
161 * @ucd_rsp_dma_addr: UPIU response dma address for debug
162 * @ucd_req_dma_addr: UPIU request dma address for debug
163 * @cmd: pointer to SCSI command
164 * @scsi_status: SCSI status of the command
165 * @command_type: SCSI, UFS, Query.
166 * @task_tag: Task tag of the command
167 * @lun: LUN of the command
168 * @intr_cmd: Interrupt command (doesn't participate in interrupt aggregation)
169 * @issue_time_stamp: time stamp for debug purposes (CLOCK_MONOTONIC)
170 * @issue_time_stamp_local_clock: time stamp for debug purposes (local_clock)
171 * @compl_time_stamp: time stamp for statistics (CLOCK_MONOTONIC)
172 * @compl_time_stamp_local_clock: time stamp for debug purposes (local_clock)
173 * @crypto_key_slot: the key slot to use for inline crypto (-1 if none)
174 * @data_unit_num: the data unit number for the first block for inline crypto
175 * @req_abort_skip: skip request abort task flag
178 struct utp_transfer_req_desc *utr_descriptor_ptr;
179 struct utp_upiu_req *ucd_req_ptr;
180 struct utp_upiu_rsp *ucd_rsp_ptr;
181 struct ufshcd_sg_entry *ucd_prdt_ptr;
183 dma_addr_t utrd_dma_addr;
184 dma_addr_t ucd_req_dma_addr;
185 dma_addr_t ucd_rsp_dma_addr;
186 dma_addr_t ucd_prdt_dma_addr;
188 struct scsi_cmnd *cmd;
193 u8 lun; /* UPIU LUN id field is only 8-bit wide */
195 ktime_t issue_time_stamp;
196 u64 issue_time_stamp_local_clock;
197 ktime_t compl_time_stamp;
198 u64 compl_time_stamp_local_clock;
199 #ifdef CONFIG_SCSI_UFS_CRYPTO
208 * struct ufs_query_req - parameters for building a query request
209 * @query_func: UPIU header query function
210 * @upiu_req: the query request data
212 struct ufs_query_req {
214 struct utp_upiu_query upiu_req;
218 * struct ufs_query_resp - UPIU QUERY
219 * @response: device response code
220 * @upiu_res: query response data
222 struct ufs_query_res {
223 struct utp_upiu_query upiu_res;
227 * struct ufs_query - holds relevant data structures for query request
228 * @request: request upiu and function
229 * @descriptor: buffer for sending/receiving descriptor
230 * @response: response upiu and response
233 struct ufs_query_req request;
235 struct ufs_query_res response;
239 * struct ufs_dev_cmd - all assosiated fields with device management commands
240 * @type: device management command type - Query, NOP OUT
241 * @lock: lock to allow one command at a time
242 * @complete: internal commands completion
243 * @query: Device management query information
246 enum dev_cmd_type type;
248 struct completion *complete;
249 struct ufs_query query;
253 * struct ufs_clk_info - UFS clock related info
254 * @list: list headed by hba->clk_list_head
257 * @max_freq: maximum frequency supported by the clock
258 * @min_freq: min frequency that can be used for clock scaling
259 * @curr_freq: indicates the current frequency that it is set to
260 * @keep_link_active: indicates that the clk should not be disabled if
262 * @enabled: variable to check against multiple enable/disable
264 struct ufs_clk_info {
265 struct list_head list;
271 bool keep_link_active;
275 enum ufs_notify_change_status {
280 struct ufs_pa_layer_attr {
290 struct ufs_pwr_mode_info {
292 struct ufs_pa_layer_attr info;
296 * struct ufs_hba_variant_ops - variant specific callbacks
297 * @name: variant name
298 * @init: called when the driver is initialized
299 * @exit: called to cleanup everything done in init
300 * @get_ufs_hci_version: called to get UFS HCI version
301 * @clk_scale_notify: notifies that clks are scaled up/down
302 * @setup_clocks: called before touching any of the controller registers
303 * @hce_enable_notify: called before and after HCE enable bit is set to allow
304 * variant specific Uni-Pro initialization.
305 * @link_startup_notify: called before and after Link startup is carried out
306 * to allow variant specific Uni-Pro initialization.
307 * @pwr_change_notify: called before and after a power mode change
308 * is carried out to allow vendor spesific capabilities
310 * @setup_xfer_req: called before any transfer request is issued
312 * @setup_task_mgmt: called before any task management request is issued
314 * @hibern8_notify: called around hibern8 enter/exit
315 * @apply_dev_quirks: called to apply device specific quirks
316 * @fixup_dev_quirks: called to modify device specific quirks
317 * @suspend: called during host controller PM callback
318 * @resume: called during host controller PM callback
319 * @dbg_register_dump: used to dump controller debug information
320 * @phy_initialization: used to initialize phys
321 * @device_reset: called to issue a reset pulse on the UFS device
322 * @config_scaling_param: called to configure clock scaling parameters
323 * @program_key: program or evict an inline encryption key
324 * @event_notify: called to notify important events
325 * @reinit_notify: called to notify reinit of UFSHCD during max gear switch
326 * @mcq_config_resource: called to configure MCQ platform resources
327 * @get_hba_mac: called to get vendor specific mac value, mandatory for mcq mode
328 * @op_runtime_config: called to config Operation and runtime regs Pointers
329 * @get_outstanding_cqs: called to get outstanding completion queues
330 * @config_esi: called to config Event Specific Interrupt
331 * @config_scsi_dev: called to configure SCSI device parameters
333 struct ufs_hba_variant_ops {
335 int (*init)(struct ufs_hba *);
336 void (*exit)(struct ufs_hba *);
337 u32 (*get_ufs_hci_version)(struct ufs_hba *);
338 int (*clk_scale_notify)(struct ufs_hba *, bool,
339 enum ufs_notify_change_status);
340 int (*setup_clocks)(struct ufs_hba *, bool,
341 enum ufs_notify_change_status);
342 int (*hce_enable_notify)(struct ufs_hba *,
343 enum ufs_notify_change_status);
344 int (*link_startup_notify)(struct ufs_hba *,
345 enum ufs_notify_change_status);
346 int (*pwr_change_notify)(struct ufs_hba *,
347 enum ufs_notify_change_status status,
348 struct ufs_pa_layer_attr *,
349 struct ufs_pa_layer_attr *);
350 void (*setup_xfer_req)(struct ufs_hba *hba, int tag,
352 void (*setup_task_mgmt)(struct ufs_hba *, int, u8);
353 void (*hibern8_notify)(struct ufs_hba *, enum uic_cmd_dme,
354 enum ufs_notify_change_status);
355 int (*apply_dev_quirks)(struct ufs_hba *hba);
356 void (*fixup_dev_quirks)(struct ufs_hba *hba);
357 int (*suspend)(struct ufs_hba *, enum ufs_pm_op,
358 enum ufs_notify_change_status);
359 int (*resume)(struct ufs_hba *, enum ufs_pm_op);
360 void (*dbg_register_dump)(struct ufs_hba *hba);
361 int (*phy_initialization)(struct ufs_hba *);
362 int (*device_reset)(struct ufs_hba *hba);
363 void (*config_scaling_param)(struct ufs_hba *hba,
364 struct devfreq_dev_profile *profile,
365 struct devfreq_simple_ondemand_data *data);
366 int (*program_key)(struct ufs_hba *hba,
367 const union ufs_crypto_cfg_entry *cfg, int slot);
368 void (*event_notify)(struct ufs_hba *hba,
369 enum ufs_event_type evt, void *data);
370 void (*reinit_notify)(struct ufs_hba *);
371 int (*mcq_config_resource)(struct ufs_hba *hba);
372 int (*get_hba_mac)(struct ufs_hba *hba);
373 int (*op_runtime_config)(struct ufs_hba *hba);
374 int (*get_outstanding_cqs)(struct ufs_hba *hba,
375 unsigned long *ocqs);
376 int (*config_esi)(struct ufs_hba *hba);
377 void (*config_scsi_dev)(struct scsi_device *sdev);
380 /* clock gating state */
381 enum clk_gating_state {
389 * struct ufs_clk_gating - UFS clock gating related info
390 * @gate_work: worker to turn off clocks after some delay as specified in
392 * @ungate_work: worker to turn on clocks that will be used in case of
394 * @state: the current clocks state
395 * @delay_ms: gating delay in ms
396 * @is_suspended: clk gating is suspended when set to 1 which can be used
397 * during suspend/resume
398 * @delay_attr: sysfs attribute to control delay_attr
399 * @enable_attr: sysfs attribute to enable/disable clock gating
400 * @is_enabled: Indicates the current status of clock gating
401 * @is_initialized: Indicates whether clock gating is initialized or not
402 * @active_reqs: number of requests that are pending and should be waited for
403 * completion before gating clocks.
404 * @clk_gating_workq: workqueue for clock gating work.
406 struct ufs_clk_gating {
407 struct delayed_work gate_work;
408 struct work_struct ungate_work;
409 enum clk_gating_state state;
410 unsigned long delay_ms;
412 struct device_attribute delay_attr;
413 struct device_attribute enable_attr;
417 struct workqueue_struct *clk_gating_workq;
421 * struct ufs_clk_scaling - UFS clock scaling related data
422 * @active_reqs: number of requests that are pending. If this is zero when
423 * devfreq ->target() function is called then schedule "suspend_work" to
425 * @tot_busy_t: Total busy time in current polling window
426 * @window_start_t: Start time (in jiffies) of the current polling window
427 * @busy_start_t: Start time of current busy period
428 * @enable_attr: sysfs attribute to enable/disable clock scaling
429 * @saved_pwr_info: UFS power mode may also be changed during scaling and this
430 * one keeps track of previous power mode.
431 * @workq: workqueue to schedule devfreq suspend/resume work
432 * @suspend_work: worker to suspend devfreq
433 * @resume_work: worker to resume devfreq
434 * @target_freq: frequency requested by devfreq framework
435 * @min_gear: lowest HS gear to scale down to
436 * @is_enabled: tracks if scaling is currently enabled or not, controlled by
437 * clkscale_enable sysfs node
438 * @is_allowed: tracks if scaling is currently allowed or not, used to block
439 * clock scaling which is not invoked from devfreq governor
440 * @is_initialized: Indicates whether clock scaling is initialized or not
441 * @is_busy_started: tracks if busy period has started or not
442 * @is_suspended: tracks if devfreq is suspended or not
444 struct ufs_clk_scaling {
446 unsigned long tot_busy_t;
447 ktime_t window_start_t;
448 ktime_t busy_start_t;
449 struct device_attribute enable_attr;
450 struct ufs_pa_layer_attr saved_pwr_info;
451 struct workqueue_struct *workq;
452 struct work_struct suspend_work;
453 struct work_struct resume_work;
454 unsigned long target_freq;
459 bool is_busy_started;
463 #define UFS_EVENT_HIST_LENGTH 8
465 * struct ufs_event_hist - keeps history of errors
466 * @pos: index to indicate cyclic buffer position
467 * @val: cyclic buffer for registers value
468 * @tstamp: cyclic buffer for time stamp
469 * @cnt: error counter
471 struct ufs_event_hist {
473 u32 val[UFS_EVENT_HIST_LENGTH];
474 u64 tstamp[UFS_EVENT_HIST_LENGTH];
475 unsigned long long cnt;
479 * struct ufs_stats - keeps usage/err statistics
480 * @last_intr_status: record the last interrupt status.
481 * @last_intr_ts: record the last interrupt timestamp.
482 * @hibern8_exit_cnt: Counter to keep track of number of exits,
483 * reset this after link-startup.
484 * @last_hibern8_exit_tstamp: Set time after the hibern8 exit.
485 * Clear after the first successful command completion.
486 * @event: array with event history.
489 u32 last_intr_status;
492 u32 hibern8_exit_cnt;
493 u64 last_hibern8_exit_tstamp;
494 struct ufs_event_hist event[UFS_EVT_CNT];
498 * enum ufshcd_state - UFS host controller state
499 * @UFSHCD_STATE_RESET: Link is not operational. Postpone SCSI command
501 * @UFSHCD_STATE_OPERATIONAL: The host controller is operational and can process
503 * @UFSHCD_STATE_EH_SCHEDULED_NON_FATAL: The error handler has been scheduled.
504 * SCSI commands may be submitted to the controller.
505 * @UFSHCD_STATE_EH_SCHEDULED_FATAL: The error handler has been scheduled. Fail
506 * newly submitted SCSI commands with error code DID_BAD_TARGET.
507 * @UFSHCD_STATE_ERROR: An unrecoverable error occurred, e.g. link recovery
508 * failed. Fail all SCSI commands with error code DID_ERROR.
512 UFSHCD_STATE_OPERATIONAL,
513 UFSHCD_STATE_EH_SCHEDULED_NON_FATAL,
514 UFSHCD_STATE_EH_SCHEDULED_FATAL,
519 /* Interrupt aggregation support is broken */
520 UFSHCD_QUIRK_BROKEN_INTR_AGGR = 1 << 0,
523 * delay before each dme command is required as the unipro
524 * layer has shown instabilities
526 UFSHCD_QUIRK_DELAY_BEFORE_DME_CMDS = 1 << 1,
529 * If UFS host controller is having issue in processing LCC (Line
530 * Control Command) coming from device then enable this quirk.
531 * When this quirk is enabled, host controller driver should disable
532 * the LCC transmission on UFS device (by clearing TX_LCC_ENABLE
533 * attribute of device to 0).
535 UFSHCD_QUIRK_BROKEN_LCC = 1 << 2,
538 * The attribute PA_RXHSUNTERMCAP specifies whether or not the
539 * inbound Link supports unterminated line in HS mode. Setting this
540 * attribute to 1 fixes moving to HS gear.
542 UFSHCD_QUIRK_BROKEN_PA_RXHSUNTERMCAP = 1 << 3,
545 * This quirk needs to be enabled if the host controller only allows
546 * accessing the peer dme attributes in AUTO mode (FAST AUTO or
549 UFSHCD_QUIRK_DME_PEER_ACCESS_AUTO_MODE = 1 << 4,
552 * This quirk needs to be enabled if the host controller doesn't
553 * advertise the correct version in UFS_VER register. If this quirk
554 * is enabled, standard UFS host driver will call the vendor specific
555 * ops (get_ufs_hci_version) to get the correct version.
557 UFSHCD_QUIRK_BROKEN_UFS_HCI_VERSION = 1 << 5,
560 * Clear handling for transfer/task request list is just opposite.
562 UFSHCI_QUIRK_BROKEN_REQ_LIST_CLR = 1 << 6,
565 * This quirk needs to be enabled if host controller doesn't allow
566 * that the interrupt aggregation timer and counter are reset by s/w.
568 UFSHCI_QUIRK_SKIP_RESET_INTR_AGGR = 1 << 7,
571 * This quirks needs to be enabled if host controller cannot be
572 * enabled via HCE register.
574 UFSHCI_QUIRK_BROKEN_HCE = 1 << 8,
577 * This quirk needs to be enabled if the host controller regards
578 * resolution of the values of PRDTO and PRDTL in UTRD as byte.
580 UFSHCD_QUIRK_PRDT_BYTE_GRAN = 1 << 9,
583 * This quirk needs to be enabled if the host controller reports
584 * OCS FATAL ERROR with device error through sense data
586 UFSHCD_QUIRK_BROKEN_OCS_FATAL_ERROR = 1 << 10,
589 * This quirk needs to be enabled if the host controller has
590 * auto-hibernate capability but it doesn't work.
592 UFSHCD_QUIRK_BROKEN_AUTO_HIBERN8 = 1 << 11,
595 * This quirk needs to disable manual flush for write booster
597 UFSHCI_QUIRK_SKIP_MANUAL_WB_FLUSH_CTRL = 1 << 12,
600 * This quirk needs to disable unipro timeout values
601 * before power mode change
603 UFSHCD_QUIRK_SKIP_DEF_UNIPRO_TIMEOUT_SETTING = 1 << 13,
606 * This quirk needs to be enabled if the host controller does not
607 * support UIC command
609 UFSHCD_QUIRK_BROKEN_UIC_CMD = 1 << 15,
612 * This quirk needs to be enabled if the host controller cannot
613 * support physical host configuration.
615 UFSHCD_QUIRK_SKIP_PH_CONFIGURATION = 1 << 16,
618 * This quirk needs to be enabled if the host controller has
619 * 64-bit addressing supported capability but it doesn't work.
621 UFSHCD_QUIRK_BROKEN_64BIT_ADDRESS = 1 << 17,
624 * This quirk needs to be enabled if the host controller has
625 * auto-hibernate capability but it's FASTAUTO only.
627 UFSHCD_QUIRK_HIBERN_FASTAUTO = 1 << 18,
630 * This quirk needs to be enabled if the host controller needs
631 * to reinit the device after switching to maximum gear.
633 UFSHCD_QUIRK_REINIT_AFTER_MAX_GEAR_SWITCH = 1 << 19,
636 * Some host raises interrupt (per queue) in addition to
637 * CQES (traditional) when ESI is disabled.
638 * Enable this quirk will disable CQES and use per queue interrupt.
640 UFSHCD_QUIRK_MCQ_BROKEN_INTR = 1 << 20,
643 * Some host does not implement SQ Run Time Command (SQRTC) register
644 * thus need this quirk to skip related flow.
646 UFSHCD_QUIRK_MCQ_BROKEN_RTC = 1 << 21,
650 /* Allow dynamic clk gating */
651 UFSHCD_CAP_CLK_GATING = 1 << 0,
653 /* Allow hiberb8 with clk gating */
654 UFSHCD_CAP_HIBERN8_WITH_CLK_GATING = 1 << 1,
656 /* Allow dynamic clk scaling */
657 UFSHCD_CAP_CLK_SCALING = 1 << 2,
659 /* Allow auto bkops to enabled during runtime suspend */
660 UFSHCD_CAP_AUTO_BKOPS_SUSPEND = 1 << 3,
663 * This capability allows host controller driver to use the UFS HCI's
664 * interrupt aggregation capability.
665 * CAUTION: Enabling this might reduce overall UFS throughput.
667 UFSHCD_CAP_INTR_AGGR = 1 << 4,
670 * This capability allows the device auto-bkops to be always enabled
671 * except during suspend (both runtime and suspend).
672 * Enabling this capability means that device will always be allowed
673 * to do background operation when it's active but it might degrade
674 * the performance of ongoing read/write operations.
676 UFSHCD_CAP_KEEP_AUTO_BKOPS_ENABLED_EXCEPT_SUSPEND = 1 << 5,
679 * This capability allows host controller driver to automatically
680 * enable runtime power management by itself instead of waiting
681 * for userspace to control the power management.
683 UFSHCD_CAP_RPM_AUTOSUSPEND = 1 << 6,
686 * This capability allows the host controller driver to turn-on
687 * WriteBooster, if the underlying device supports it and is
688 * provisioned to be used. This would increase the write performance.
690 UFSHCD_CAP_WB_EN = 1 << 7,
693 * This capability allows the host controller driver to use the
694 * inline crypto engine, if it is present
696 UFSHCD_CAP_CRYPTO = 1 << 8,
699 * This capability allows the controller regulators to be put into
700 * lpm mode aggressively during clock gating.
701 * This would increase power savings.
703 UFSHCD_CAP_AGGR_POWER_COLLAPSE = 1 << 9,
706 * This capability allows the host controller driver to use DeepSleep,
707 * if it is supported by the UFS device. The host controller driver must
708 * support device hardware reset via the hba->device_reset() callback,
709 * in order to exit DeepSleep state.
711 UFSHCD_CAP_DEEPSLEEP = 1 << 10,
714 * This capability allows the host controller driver to use temperature
715 * notification if it is supported by the UFS device.
717 UFSHCD_CAP_TEMP_NOTIF = 1 << 11,
720 * Enable WriteBooster when scaling up the clock and disable
721 * WriteBooster when scaling the clock down.
723 UFSHCD_CAP_WB_WITH_CLK_SCALING = 1 << 12,
726 struct ufs_hba_variant_params {
727 struct devfreq_dev_profile devfreq_profile;
728 struct devfreq_simple_ondemand_data ondemand_data;
729 u16 hba_enable_delay_us;
730 u32 wb_flush_threshold;
733 struct ufs_hba_monitor {
734 unsigned long chunk_size;
736 unsigned long nr_sec_rw[2];
737 ktime_t total_busy[2];
739 unsigned long nr_req[2];
746 ktime_t busy_start_ts[2];
753 * struct ufshcd_res_info_t - MCQ related resource regions
755 * @name: resource name
756 * @resource: pointer to resource region
757 * @base: register base address
759 struct ufshcd_res_info {
761 struct resource *resource;
777 * struct ufshcd_mcq_opr_info_t - Operation and Runtime registers
779 * @offset: Doorbell Address Offset
780 * @stride: Steps proportional to queue [0...31]
781 * @base: base address
783 struct ufshcd_mcq_opr_info_t {
784 unsigned long offset;
785 unsigned long stride;
789 enum ufshcd_mcq_opr {
798 * struct ufs_hba - per adapter private structure
799 * @mmio_base: UFSHCI base register address
800 * @ucdl_base_addr: UFS Command Descriptor base address
801 * @utrdl_base_addr: UTP Transfer Request Descriptor base address
802 * @utmrdl_base_addr: UTP Task Management Descriptor base address
803 * @ucdl_dma_addr: UFS Command Descriptor DMA address
804 * @utrdl_dma_addr: UTRDL DMA address
805 * @utmrdl_dma_addr: UTMRDL DMA address
806 * @host: Scsi_Host instance of the driver
807 * @dev: device handle
808 * @ufs_device_wlun: WLUN that controls the entire UFS device.
809 * @hwmon_device: device instance registered with the hwmon core.
810 * @curr_dev_pwr_mode: active UFS device power mode.
811 * @uic_link_state: active state of the link to the UFS device.
812 * @rpm_lvl: desired UFS power management level during runtime PM.
813 * @spm_lvl: desired UFS power management level during system PM.
814 * @pm_op_in_progress: whether or not a PM operation is in progress.
815 * @ahit: value of Auto-Hibernate Idle Timer register.
816 * @lrb: local reference block
817 * @outstanding_tasks: Bits representing outstanding task requests
818 * @outstanding_lock: Protects @outstanding_reqs.
819 * @outstanding_reqs: Bits representing outstanding transfer requests
820 * @capabilities: UFS Controller Capabilities
821 * @mcq_capabilities: UFS Multi Circular Queue capabilities
822 * @nutrs: Transfer Request Queue depth supported by controller
823 * @nutmrs: Task Management Queue depth supported by controller
824 * @reserved_slot: Used to submit device commands. Protected by @dev_cmd.lock.
825 * @ufs_version: UFS Version to which controller complies
826 * @vops: pointer to variant specific operations
827 * @vps: pointer to variant specific parameters
828 * @priv: pointer to variant specific private data
829 * @sg_entry_size: size of struct ufshcd_sg_entry (may include variant fields)
830 * @irq: Irq number of the controller
831 * @is_irq_enabled: whether or not the UFS controller interrupt is enabled.
832 * @dev_ref_clk_freq: reference clock frequency
833 * @quirks: bitmask with information about deviations from the UFSHCI standard.
834 * @dev_quirks: bitmask with information about deviations from the UFS standard.
835 * @tmf_tag_set: TMF tag set.
836 * @tmf_queue: Used to allocate TMF tags.
837 * @tmf_rqs: array with pointers to TMF requests while these are in progress.
838 * @active_uic_cmd: handle of active UIC command
839 * @uic_cmd_mutex: mutex for UIC command
840 * @uic_async_done: completion used during UIC processing
841 * @ufshcd_state: UFSHCD state
842 * @eh_flags: Error handling flags
843 * @intr_mask: Interrupt Mask Bits
844 * @ee_ctrl_mask: Exception event control mask
845 * @ee_drv_mask: Exception event mask for driver
846 * @ee_usr_mask: Exception event mask for user (set via debugfs)
847 * @ee_ctrl_mutex: Used to serialize exception event information.
848 * @is_powered: flag to check if HBA is powered
849 * @shutting_down: flag to check if shutdown has been invoked
850 * @host_sem: semaphore used to serialize concurrent contexts
851 * @eh_wq: Workqueue that eh_work works on
852 * @eh_work: Worker to handle UFS errors that require s/w attention
853 * @eeh_work: Worker to handle exception events
854 * @errors: HBA errors
855 * @uic_error: UFS interconnect layer error status
856 * @saved_err: sticky error mask
857 * @saved_uic_err: sticky UIC error mask
858 * @ufs_stats: various error counters
859 * @force_reset: flag to force eh_work perform a full reset
860 * @force_pmc: flag to force a power mode change
861 * @silence_err_logs: flag to silence error logs
862 * @dev_cmd: ufs device management command information
863 * @last_dme_cmd_tstamp: time stamp of the last completed DME command
864 * @nop_out_timeout: NOP OUT timeout value
865 * @dev_info: information about the UFS device
866 * @auto_bkops_enabled: to track whether bkops is enabled in device
867 * @vreg_info: UFS device voltage regulator information
868 * @clk_list_head: UFS host controller clocks list node head
869 * @use_pm_opp: Indicates whether OPP based scaling is used or not
870 * @req_abort_count: number of times ufshcd_abort() has been called
871 * @lanes_per_direction: number of lanes per data direction between the UFS
872 * controller and the UFS device.
873 * @pwr_info: holds current power mode
874 * @max_pwr_info: keeps the device max valid pwm
875 * @clk_gating: information related to clock gating
876 * @caps: bitmask with information about UFS controller capabilities
877 * @devfreq: frequency scaling information owned by the devfreq core
878 * @clk_scaling: frequency scaling information owned by the UFS driver
879 * @system_suspending: system suspend has been started and system resume has
881 * @is_sys_suspended: UFS device has been suspended because of system suspend
882 * @urgent_bkops_lvl: keeps track of urgent bkops level for device
883 * @is_urgent_bkops_lvl_checked: keeps track if the urgent bkops level for
884 * device is known or not.
885 * @wb_mutex: used to serialize devfreq and sysfs write booster toggling
886 * @clk_scaling_lock: used to serialize device commands and clock scaling
887 * @desc_size: descriptor sizes reported by device
888 * @scsi_block_reqs_cnt: reference counting for scsi block requests
889 * @bsg_dev: struct device associated with the BSG queue
890 * @bsg_queue: BSG queue associated with the UFS controller
891 * @rpm_dev_flush_recheck_work: used to suspend from RPM (runtime power
892 * management) after the UFS device has finished a WriteBooster buffer
893 * flush or auto BKOP.
894 * @monitor: statistics about UFS commands
895 * @crypto_capabilities: Content of crypto capabilities register (0x100)
896 * @crypto_cap_array: Array of crypto capabilities
897 * @crypto_cfg_register: Start of the crypto cfg array
898 * @crypto_profile: the crypto profile of this hba (if applicable)
899 * @debugfs_root: UFS controller debugfs root directory
900 * @debugfs_ee_work: used to restore ee_ctrl_mask after a delay
901 * @debugfs_ee_rate_limit_ms: user configurable delay after which to restore
903 * @luns_avail: number of regular and well known LUNs supported by the UFS
905 * @nr_hw_queues: number of hardware queues configured
906 * @nr_queues: number of Queues of different queue types
907 * @complete_put: whether or not to call ufshcd_rpm_put() from inside
908 * ufshcd_resume_complete()
909 * @ext_iid_sup: is EXT_IID is supported by UFSHC
910 * @mcq_sup: is mcq supported by UFSHC
911 * @mcq_enabled: is mcq ready to accept requests
912 * @res: array of resource info of MCQ registers
913 * @mcq_base: Multi circular queue registers base address
914 * @uhq: array of supported hardware queues
915 * @dev_cmd_queue: Queue for issuing device management commands
916 * @mcq_opr: MCQ operation and runtime registers
917 * @ufs_rtc_update_work: A work for UFS RTC periodic update
918 * @pm_qos_req: PM QoS request handle
919 * @pm_qos_enabled: flag to check if pm qos is enabled
922 void __iomem *mmio_base;
924 /* Virtual memory reference */
925 struct utp_transfer_cmd_desc *ucdl_base_addr;
926 struct utp_transfer_req_desc *utrdl_base_addr;
927 struct utp_task_req_desc *utmrdl_base_addr;
929 /* DMA memory reference */
930 dma_addr_t ucdl_dma_addr;
931 dma_addr_t utrdl_dma_addr;
932 dma_addr_t utmrdl_dma_addr;
934 struct Scsi_Host *host;
936 struct scsi_device *ufs_device_wlun;
938 #ifdef CONFIG_SCSI_UFS_HWMON
939 struct device *hwmon_device;
942 enum ufs_dev_pwr_mode curr_dev_pwr_mode;
943 enum uic_link_state uic_link_state;
944 /* Desired UFS power management level during runtime PM */
945 enum ufs_pm_level rpm_lvl;
946 /* Desired UFS power management level during system PM */
947 enum ufs_pm_level spm_lvl;
948 int pm_op_in_progress;
950 /* Auto-Hibernate Idle Timer register value */
953 struct ufshcd_lrb *lrb;
955 unsigned long outstanding_tasks;
956 spinlock_t outstanding_lock;
957 unsigned long outstanding_reqs;
961 u32 mcq_capabilities;
965 const struct ufs_hba_variant_ops *vops;
966 struct ufs_hba_variant_params *vps;
968 #ifdef CONFIG_SCSI_UFS_VARIABLE_SG_ENTRY_SIZE
969 size_t sg_entry_size;
973 enum ufs_ref_clk_freq dev_ref_clk_freq;
975 unsigned int quirks; /* Deviations from standard UFSHCI spec. */
977 /* Device deviations from standard UFS device spec. */
978 unsigned int dev_quirks;
980 struct blk_mq_tag_set tmf_tag_set;
981 struct request_queue *tmf_queue;
982 struct request **tmf_rqs;
984 struct uic_command *active_uic_cmd;
985 struct mutex uic_cmd_mutex;
986 struct completion *uic_async_done;
988 enum ufshcd_state ufshcd_state;
994 struct mutex ee_ctrl_mutex;
997 struct semaphore host_sem;
1000 struct workqueue_struct *eh_wq;
1001 struct work_struct eh_work;
1002 struct work_struct eeh_work;
1009 struct ufs_stats ufs_stats;
1012 bool silence_err_logs;
1014 /* Device management request data */
1015 struct ufs_dev_cmd dev_cmd;
1016 ktime_t last_dme_cmd_tstamp;
1017 int nop_out_timeout;
1019 /* Keeps information of the UFS device connected to this host */
1020 struct ufs_dev_info dev_info;
1021 bool auto_bkops_enabled;
1022 struct ufs_vreg_info vreg_info;
1023 struct list_head clk_list_head;
1026 /* Number of requests aborts */
1027 int req_abort_count;
1029 /* Number of lanes available (1 or 2) for Rx/Tx */
1030 u32 lanes_per_direction;
1031 struct ufs_pa_layer_attr pwr_info;
1032 struct ufs_pwr_mode_info max_pwr_info;
1034 struct ufs_clk_gating clk_gating;
1035 /* Control to enable/disable host capabilities */
1038 struct devfreq *devfreq;
1039 struct ufs_clk_scaling clk_scaling;
1040 bool system_suspending;
1041 bool is_sys_suspended;
1043 enum bkops_status urgent_bkops_lvl;
1044 bool is_urgent_bkops_lvl_checked;
1046 struct mutex wb_mutex;
1047 struct rw_semaphore clk_scaling_lock;
1048 atomic_t scsi_block_reqs_cnt;
1050 struct device bsg_dev;
1051 struct request_queue *bsg_queue;
1052 struct delayed_work rpm_dev_flush_recheck_work;
1054 struct ufs_hba_monitor monitor;
1056 #ifdef CONFIG_SCSI_UFS_CRYPTO
1057 union ufs_crypto_capabilities crypto_capabilities;
1058 union ufs_crypto_cap_entry *crypto_cap_array;
1059 u32 crypto_cfg_register;
1060 struct blk_crypto_profile crypto_profile;
1062 #ifdef CONFIG_DEBUG_FS
1063 struct dentry *debugfs_root;
1064 struct delayed_work debugfs_ee_work;
1065 u32 debugfs_ee_rate_limit_ms;
1067 #ifdef CONFIG_SCSI_UFS_FAULT_INJECTION
1068 struct fault_attr trigger_eh_attr;
1069 struct fault_attr timeout_attr;
1072 unsigned int nr_hw_queues;
1073 unsigned int nr_queues[HCTX_MAX_TYPES];
1076 bool scsi_host_added;
1079 struct ufshcd_res_info res[RES_MAX];
1080 void __iomem *mcq_base;
1081 struct ufs_hw_queue *uhq;
1082 struct ufs_hw_queue *dev_cmd_queue;
1083 struct ufshcd_mcq_opr_info_t mcq_opr[OPR_MAX];
1085 struct delayed_work ufs_rtc_update_work;
1086 struct pm_qos_request pm_qos_req;
1087 bool pm_qos_enabled;
1091 * struct ufs_hw_queue - per hardware queue structure
1092 * @mcq_sq_head: base address of submission queue head pointer
1093 * @mcq_sq_tail: base address of submission queue tail pointer
1094 * @mcq_cq_head: base address of completion queue head pointer
1095 * @mcq_cq_tail: base address of completion queue tail pointer
1096 * @sqe_base_addr: submission queue entry base address
1097 * @sqe_dma_addr: submission queue dma address
1098 * @cqe_base_addr: completion queue base address
1099 * @cqe_dma_addr: completion queue dma address
1100 * @max_entries: max number of slots in this hardware queue
1101 * @id: hardware queue ID
1102 * @sq_tp_slot: current slot to which SQ tail pointer is pointing
1103 * @sq_lock: serialize submission queue access
1104 * @cq_tail_slot: current slot to which CQ tail pointer is pointing
1105 * @cq_head_slot: current slot to which CQ head pointer is pointing
1106 * @cq_lock: Synchronize between multiple polling instances
1107 * @sq_mutex: prevent submission queue concurrent access
1109 struct ufs_hw_queue {
1110 void __iomem *mcq_sq_head;
1111 void __iomem *mcq_sq_tail;
1112 void __iomem *mcq_cq_head;
1113 void __iomem *mcq_cq_tail;
1115 struct utp_transfer_req_desc *sqe_base_addr;
1116 dma_addr_t sqe_dma_addr;
1117 struct cq_entry *cqe_base_addr;
1118 dma_addr_t cqe_dma_addr;
1126 /* prevent concurrent access to submission queue */
1127 struct mutex sq_mutex;
1130 static inline bool is_mcq_enabled(struct ufs_hba *hba)
1132 return hba->mcq_enabled;
1135 #ifdef CONFIG_SCSI_UFS_VARIABLE_SG_ENTRY_SIZE
1136 static inline size_t ufshcd_sg_entry_size(const struct ufs_hba *hba)
1138 return hba->sg_entry_size;
1141 static inline void ufshcd_set_sg_entry_size(struct ufs_hba *hba, size_t sg_entry_size)
1143 WARN_ON_ONCE(sg_entry_size < sizeof(struct ufshcd_sg_entry));
1144 hba->sg_entry_size = sg_entry_size;
1147 static inline size_t ufshcd_sg_entry_size(const struct ufs_hba *hba)
1149 return sizeof(struct ufshcd_sg_entry);
1152 #define ufshcd_set_sg_entry_size(hba, sg_entry_size) \
1153 ({ (void)(hba); BUILD_BUG_ON(sg_entry_size != sizeof(struct ufshcd_sg_entry)); })
1156 static inline size_t ufshcd_get_ucd_size(const struct ufs_hba *hba)
1158 return sizeof(struct utp_transfer_cmd_desc) + SG_ALL * ufshcd_sg_entry_size(hba);
1161 /* Returns true if clocks can be gated. Otherwise false */
1162 static inline bool ufshcd_is_clkgating_allowed(struct ufs_hba *hba)
1164 return hba->caps & UFSHCD_CAP_CLK_GATING;
1166 static inline bool ufshcd_can_hibern8_during_gating(struct ufs_hba *hba)
1168 return hba->caps & UFSHCD_CAP_HIBERN8_WITH_CLK_GATING;
1170 static inline int ufshcd_is_clkscaling_supported(struct ufs_hba *hba)
1172 return hba->caps & UFSHCD_CAP_CLK_SCALING;
1174 static inline bool ufshcd_can_autobkops_during_suspend(struct ufs_hba *hba)
1176 return hba->caps & UFSHCD_CAP_AUTO_BKOPS_SUSPEND;
1178 static inline bool ufshcd_is_rpm_autosuspend_allowed(struct ufs_hba *hba)
1180 return hba->caps & UFSHCD_CAP_RPM_AUTOSUSPEND;
1183 static inline bool ufshcd_is_intr_aggr_allowed(struct ufs_hba *hba)
1185 return (hba->caps & UFSHCD_CAP_INTR_AGGR) &&
1186 !(hba->quirks & UFSHCD_QUIRK_BROKEN_INTR_AGGR);
1189 static inline bool ufshcd_can_aggressive_pc(struct ufs_hba *hba)
1191 return !!(ufshcd_is_link_hibern8(hba) &&
1192 (hba->caps & UFSHCD_CAP_AGGR_POWER_COLLAPSE));
1195 static inline bool ufshcd_is_auto_hibern8_supported(struct ufs_hba *hba)
1197 return (hba->capabilities & MASK_AUTO_HIBERN8_SUPPORT) &&
1198 !(hba->quirks & UFSHCD_QUIRK_BROKEN_AUTO_HIBERN8);
1201 static inline bool ufshcd_is_auto_hibern8_enabled(struct ufs_hba *hba)
1203 return FIELD_GET(UFSHCI_AHIBERN8_TIMER_MASK, hba->ahit);
1206 static inline bool ufshcd_is_wb_allowed(struct ufs_hba *hba)
1208 return hba->caps & UFSHCD_CAP_WB_EN;
1211 static inline bool ufshcd_enable_wb_if_scaling_up(struct ufs_hba *hba)
1213 return hba->caps & UFSHCD_CAP_WB_WITH_CLK_SCALING;
1216 #define ufsmcq_writel(hba, val, reg) \
1217 writel((val), (hba)->mcq_base + (reg))
1218 #define ufsmcq_readl(hba, reg) \
1219 readl((hba)->mcq_base + (reg))
1221 #define ufsmcq_writelx(hba, val, reg) \
1222 writel_relaxed((val), (hba)->mcq_base + (reg))
1223 #define ufsmcq_readlx(hba, reg) \
1224 readl_relaxed((hba)->mcq_base + (reg))
1226 #define ufshcd_writel(hba, val, reg) \
1227 writel((val), (hba)->mmio_base + (reg))
1228 #define ufshcd_readl(hba, reg) \
1229 readl((hba)->mmio_base + (reg))
1232 * ufshcd_rmwl - perform read/modify/write for a controller register
1233 * @hba: per adapter instance
1234 * @mask: mask to apply on read value
1235 * @val: actual value to write
1236 * @reg: register address
1238 static inline void ufshcd_rmwl(struct ufs_hba *hba, u32 mask, u32 val, u32 reg)
1242 tmp = ufshcd_readl(hba, reg);
1244 tmp |= (val & mask);
1245 ufshcd_writel(hba, tmp, reg);
1248 void ufshcd_enable_irq(struct ufs_hba *hba);
1249 void ufshcd_disable_irq(struct ufs_hba *hba);
1250 int ufshcd_alloc_host(struct device *, struct ufs_hba **);
1251 void ufshcd_dealloc_host(struct ufs_hba *);
1252 int ufshcd_hba_enable(struct ufs_hba *hba);
1253 int ufshcd_init(struct ufs_hba *, void __iomem *, unsigned int);
1254 int ufshcd_link_recovery(struct ufs_hba *hba);
1255 int ufshcd_make_hba_operational(struct ufs_hba *hba);
1256 void ufshcd_remove(struct ufs_hba *);
1257 int ufshcd_uic_hibern8_enter(struct ufs_hba *hba);
1258 int ufshcd_uic_hibern8_exit(struct ufs_hba *hba);
1259 void ufshcd_delay_us(unsigned long us, unsigned long tolerance);
1260 void ufshcd_parse_dev_ref_clk_freq(struct ufs_hba *hba, struct clk *refclk);
1261 void ufshcd_update_evt_hist(struct ufs_hba *hba, u32 id, u32 val);
1262 void ufshcd_hba_stop(struct ufs_hba *hba);
1263 void ufshcd_schedule_eh_work(struct ufs_hba *hba);
1264 void ufshcd_mcq_config_mac(struct ufs_hba *hba, u32 max_active_cmds);
1265 u32 ufshcd_mcq_read_cqis(struct ufs_hba *hba, int i);
1266 void ufshcd_mcq_write_cqis(struct ufs_hba *hba, u32 val, int i);
1267 unsigned long ufshcd_mcq_poll_cqe_lock(struct ufs_hba *hba,
1268 struct ufs_hw_queue *hwq);
1269 void ufshcd_mcq_make_queues_operational(struct ufs_hba *hba);
1270 void ufshcd_mcq_enable_esi(struct ufs_hba *hba);
1271 void ufshcd_mcq_enable(struct ufs_hba *hba);
1272 void ufshcd_mcq_config_esi(struct ufs_hba *hba, struct msi_msg *msg);
1274 int ufshcd_opp_config_clks(struct device *dev, struct opp_table *opp_table,
1275 struct dev_pm_opp *opp, void *data,
1278 * ufshcd_set_variant - set variant specific data to the hba
1279 * @hba: per adapter instance
1280 * @variant: pointer to variant specific data
1282 static inline void ufshcd_set_variant(struct ufs_hba *hba, void *variant)
1285 hba->priv = variant;
1289 * ufshcd_get_variant - get variant specific data from the hba
1290 * @hba: per adapter instance
1292 static inline void *ufshcd_get_variant(struct ufs_hba *hba)
1299 extern int ufshcd_runtime_suspend(struct device *dev);
1300 extern int ufshcd_runtime_resume(struct device *dev);
1302 #ifdef CONFIG_PM_SLEEP
1303 extern int ufshcd_system_suspend(struct device *dev);
1304 extern int ufshcd_system_resume(struct device *dev);
1305 extern int ufshcd_system_freeze(struct device *dev);
1306 extern int ufshcd_system_thaw(struct device *dev);
1307 extern int ufshcd_system_restore(struct device *dev);
1310 extern int ufshcd_dme_configure_adapt(struct ufs_hba *hba,
1313 extern int ufshcd_dme_set_attr(struct ufs_hba *hba, u32 attr_sel,
1314 u8 attr_set, u32 mib_val, u8 peer);
1315 extern int ufshcd_dme_get_attr(struct ufs_hba *hba, u32 attr_sel,
1316 u32 *mib_val, u8 peer);
1317 extern int ufshcd_config_pwr_mode(struct ufs_hba *hba,
1318 struct ufs_pa_layer_attr *desired_pwr_mode);
1319 extern int ufshcd_uic_change_pwr_mode(struct ufs_hba *hba, u8 mode);
1321 /* UIC command interfaces for DME primitives */
1324 #define ATTR_SET_NOR 0 /* NORMAL */
1325 #define ATTR_SET_ST 1 /* STATIC */
1327 static inline int ufshcd_dme_set(struct ufs_hba *hba, u32 attr_sel,
1330 return ufshcd_dme_set_attr(hba, attr_sel, ATTR_SET_NOR,
1331 mib_val, DME_LOCAL);
1334 static inline int ufshcd_dme_st_set(struct ufs_hba *hba, u32 attr_sel,
1337 return ufshcd_dme_set_attr(hba, attr_sel, ATTR_SET_ST,
1338 mib_val, DME_LOCAL);
1341 static inline int ufshcd_dme_peer_set(struct ufs_hba *hba, u32 attr_sel,
1344 return ufshcd_dme_set_attr(hba, attr_sel, ATTR_SET_NOR,
1348 static inline int ufshcd_dme_peer_st_set(struct ufs_hba *hba, u32 attr_sel,
1351 return ufshcd_dme_set_attr(hba, attr_sel, ATTR_SET_ST,
1355 static inline int ufshcd_dme_get(struct ufs_hba *hba,
1356 u32 attr_sel, u32 *mib_val)
1358 return ufshcd_dme_get_attr(hba, attr_sel, mib_val, DME_LOCAL);
1361 static inline int ufshcd_dme_peer_get(struct ufs_hba *hba,
1362 u32 attr_sel, u32 *mib_val)
1364 return ufshcd_dme_get_attr(hba, attr_sel, mib_val, DME_PEER);
1367 static inline bool ufshcd_is_hs_mode(struct ufs_pa_layer_attr *pwr_info)
1369 return (pwr_info->pwr_rx == FAST_MODE ||
1370 pwr_info->pwr_rx == FASTAUTO_MODE) &&
1371 (pwr_info->pwr_tx == FAST_MODE ||
1372 pwr_info->pwr_tx == FASTAUTO_MODE);
1375 static inline int ufshcd_disable_host_tx_lcc(struct ufs_hba *hba)
1377 return ufshcd_dme_set(hba, UIC_ARG_MIB(PA_LOCAL_TX_LCC_ENABLE), 0);
1380 void ufshcd_auto_hibern8_update(struct ufs_hba *hba, u32 ahit);
1381 void ufshcd_fixup_dev_quirks(struct ufs_hba *hba,
1382 const struct ufs_dev_quirk *fixups);
1383 #define SD_ASCII_STD true
1384 #define SD_RAW false
1385 int ufshcd_read_string_desc(struct ufs_hba *hba, u8 desc_index,
1386 u8 **buf, bool ascii);
1388 void ufshcd_hold(struct ufs_hba *hba);
1389 void ufshcd_release(struct ufs_hba *hba);
1391 void ufshcd_clkgate_delay_set(struct device *dev, unsigned long value);
1393 u32 ufshcd_get_local_unipro_ver(struct ufs_hba *hba);
1395 int ufshcd_get_vreg(struct device *dev, struct ufs_vreg *vreg);
1397 int ufshcd_send_uic_cmd(struct ufs_hba *hba, struct uic_command *uic_cmd);
1399 int ufshcd_advanced_rpmb_req_handler(struct ufs_hba *hba, struct utp_upiu_req *req_upiu,
1400 struct utp_upiu_req *rsp_upiu, struct ufs_ehs *ehs_req,
1401 struct ufs_ehs *ehs_rsp, int sg_cnt,
1402 struct scatterlist *sg_list, enum dma_data_direction dir);
1403 int ufshcd_wb_toggle(struct ufs_hba *hba, bool enable);
1404 int ufshcd_wb_toggle_buf_flush(struct ufs_hba *hba, bool enable);
1405 int ufshcd_suspend_prepare(struct device *dev);
1406 int __ufshcd_suspend_prepare(struct device *dev, bool rpm_ok_for_spm);
1407 void ufshcd_resume_complete(struct device *dev);
1408 bool ufshcd_is_hba_active(struct ufs_hba *hba);
1409 void ufshcd_pm_qos_init(struct ufs_hba *hba);
1410 void ufshcd_pm_qos_exit(struct ufs_hba *hba);
1412 /* Wrapper functions for safely calling variant operations */
1413 static inline int ufshcd_vops_init(struct ufs_hba *hba)
1415 if (hba->vops && hba->vops->init)
1416 return hba->vops->init(hba);
1421 static inline int ufshcd_vops_phy_initialization(struct ufs_hba *hba)
1423 if (hba->vops && hba->vops->phy_initialization)
1424 return hba->vops->phy_initialization(hba);
1429 extern const struct ufs_pm_lvl_states ufs_pm_lvl_states[];
1431 int ufshcd_dump_regs(struct ufs_hba *hba, size_t offset, size_t len,
1432 const char *prefix);
1434 int __ufshcd_write_ee_control(struct ufs_hba *hba, u32 ee_ctrl_mask);
1435 int ufshcd_write_ee_control(struct ufs_hba *hba);
1436 int ufshcd_update_ee_control(struct ufs_hba *hba, u16 *mask,
1437 const u16 *other_mask, u16 set, u16 clr);
1439 #endif /* End of Header */