1 // SPDX-License-Identifier: GPL-2.0+
3 * Apple Cinema Display driver
7 * Thanks to Caskey L. Dickson for his work with acdctl.
10 #include <linux/kernel.h>
11 #include <linux/errno.h>
12 #include <linux/init.h>
13 #include <linux/module.h>
14 #include <linux/slab.h>
15 #include <linux/usb.h>
16 #include <linux/backlight.h>
17 #include <linux/timer.h>
18 #include <linux/workqueue.h>
19 #include <linux/atomic.h>
21 #define APPLE_VENDOR_ID 0x05AC
23 #define USB_REQ_GET_REPORT 0x01
24 #define USB_REQ_SET_REPORT 0x09
26 #define ACD_USB_TIMEOUT 250
28 #define ACD_USB_EDID 0x0302
29 #define ACD_USB_BRIGHTNESS 0x0310
31 #define ACD_BTN_NONE 0
32 #define ACD_BTN_BRIGHT_UP 3
33 #define ACD_BTN_BRIGHT_DOWN 4
35 #define ACD_URB_BUFFER_LEN 2
36 #define ACD_MSG_BUFFER_LEN 2
38 #define APPLEDISPLAY_DEVICE(prod) \
39 .match_flags = USB_DEVICE_ID_MATCH_DEVICE | \
40 USB_DEVICE_ID_MATCH_INT_CLASS | \
41 USB_DEVICE_ID_MATCH_INT_PROTOCOL, \
42 .idVendor = APPLE_VENDOR_ID, \
43 .idProduct = (prod), \
44 .bInterfaceClass = USB_CLASS_HID, \
45 .bInterfaceProtocol = 0x00
47 /* table of devices that work with this driver */
48 static const struct usb_device_id appledisplay_table[] = {
49 { APPLEDISPLAY_DEVICE(0x9218) },
50 { APPLEDISPLAY_DEVICE(0x9219) },
51 { APPLEDISPLAY_DEVICE(0x921c) },
52 { APPLEDISPLAY_DEVICE(0x921d) },
53 { APPLEDISPLAY_DEVICE(0x9222) },
54 { APPLEDISPLAY_DEVICE(0x9226) },
55 { APPLEDISPLAY_DEVICE(0x9236) },
57 /* Terminating entry */
60 MODULE_DEVICE_TABLE(usb, appledisplay_table);
62 /* Structure to hold all of our device specific stuff */
64 struct usb_device *udev; /* usb device */
65 struct urb *urb; /* usb request block */
66 struct backlight_device *bd; /* backlight device */
67 u8 *urbdata; /* interrupt URB data buffer */
68 u8 *msgdata; /* control message data buffer */
70 struct delayed_work work;
72 struct mutex sysfslock; /* concurrent read and write */
75 static atomic_t count_displays = ATOMIC_INIT(0);
77 static void appledisplay_complete(struct urb *urb)
79 struct appledisplay *pdata = urb->context;
80 struct device *dev = &pdata->udev->dev;
81 int status = urb->status;
90 "OVERFLOW with data length %d, actual length is %d\n",
91 ACD_URB_BUFFER_LEN, pdata->urb->actual_length);
96 /* This urb is terminated, clean up */
97 dev_dbg(dev, "%s - urb shuttingdown with status: %d\n",
101 dev_dbg(dev, "%s - nonzero urb status received: %d\n",
106 switch(pdata->urbdata[1]) {
107 case ACD_BTN_BRIGHT_UP:
108 case ACD_BTN_BRIGHT_DOWN:
109 pdata->button_pressed = 1;
110 schedule_delayed_work(&pdata->work, 0);
114 pdata->button_pressed = 0;
119 retval = usb_submit_urb(pdata->urb, GFP_ATOMIC);
121 dev_err(dev, "%s - usb_submit_urb failed with result %d\n",
126 static int appledisplay_bl_update_status(struct backlight_device *bd)
128 struct appledisplay *pdata = bl_get_data(bd);
131 mutex_lock(&pdata->sysfslock);
132 pdata->msgdata[0] = 0x10;
133 pdata->msgdata[1] = bd->props.brightness;
135 retval = usb_control_msg(
137 usb_sndctrlpipe(pdata->udev, 0),
139 USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE,
144 mutex_unlock(&pdata->sysfslock);
152 static int appledisplay_bl_get_brightness(struct backlight_device *bd)
154 struct appledisplay *pdata = bl_get_data(bd);
155 int retval, brightness;
157 mutex_lock(&pdata->sysfslock);
158 retval = usb_control_msg(
160 usb_rcvctrlpipe(pdata->udev, 0),
162 USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_INTERFACE,
171 brightness = pdata->msgdata[1];
173 mutex_unlock(&pdata->sysfslock);
181 static const struct backlight_ops appledisplay_bl_data = {
182 .get_brightness = appledisplay_bl_get_brightness,
183 .update_status = appledisplay_bl_update_status,
186 static void appledisplay_work(struct work_struct *work)
188 struct appledisplay *pdata =
189 container_of(work, struct appledisplay, work.work);
192 retval = appledisplay_bl_get_brightness(pdata->bd);
194 pdata->bd->props.brightness = retval;
196 /* Poll again in about 125ms if there's still a button pressed */
197 if (pdata->button_pressed)
198 schedule_delayed_work(&pdata->work, HZ / 8);
201 static int appledisplay_probe(struct usb_interface *iface,
202 const struct usb_device_id *id)
204 struct backlight_properties props;
205 struct appledisplay *pdata;
206 struct usb_device *udev = interface_to_usbdev(iface);
207 struct usb_endpoint_descriptor *endpoint;
208 int int_in_endpointAddr = 0;
209 int retval, brightness;
212 /* set up the endpoint information */
213 /* use only the first interrupt-in endpoint */
214 retval = usb_find_int_in_endpoint(iface->cur_altsetting, &endpoint);
216 dev_err(&iface->dev, "Could not find int-in endpoint\n");
220 int_in_endpointAddr = endpoint->bEndpointAddress;
222 /* allocate memory for our device state and initialize it */
223 pdata = kzalloc(sizeof(struct appledisplay), GFP_KERNEL);
231 INIT_DELAYED_WORK(&pdata->work, appledisplay_work);
232 mutex_init(&pdata->sysfslock);
234 /* Allocate buffer for control messages */
235 pdata->msgdata = kmalloc(ACD_MSG_BUFFER_LEN, GFP_KERNEL);
236 if (!pdata->msgdata) {
241 /* Allocate interrupt URB */
242 pdata->urb = usb_alloc_urb(0, GFP_KERNEL);
248 /* Allocate buffer for interrupt data */
249 pdata->urbdata = usb_alloc_coherent(pdata->udev, ACD_URB_BUFFER_LEN,
250 GFP_KERNEL, &pdata->urb->transfer_dma);
251 if (!pdata->urbdata) {
253 dev_err(&iface->dev, "Allocating URB buffer failed\n");
257 /* Configure interrupt URB */
258 usb_fill_int_urb(pdata->urb, udev,
259 usb_rcvintpipe(udev, int_in_endpointAddr),
260 pdata->urbdata, ACD_URB_BUFFER_LEN, appledisplay_complete,
262 pdata->urb->transfer_flags = URB_NO_TRANSFER_DMA_MAP;
263 if (usb_submit_urb(pdata->urb, GFP_KERNEL)) {
265 dev_err(&iface->dev, "Submitting URB failed\n");
269 /* Register backlight device */
270 snprintf(bl_name, sizeof(bl_name), "appledisplay%d",
271 atomic_inc_return(&count_displays) - 1);
272 memset(&props, 0, sizeof(struct backlight_properties));
273 props.type = BACKLIGHT_RAW;
274 props.max_brightness = 0xff;
275 pdata->bd = backlight_device_register(bl_name, NULL, pdata,
276 &appledisplay_bl_data, &props);
277 if (IS_ERR(pdata->bd)) {
278 dev_err(&iface->dev, "Backlight registration failed\n");
279 retval = PTR_ERR(pdata->bd);
283 /* Try to get brightness */
284 brightness = appledisplay_bl_get_brightness(pdata->bd);
286 if (brightness < 0) {
289 "Error while getting initial brightness: %d\n", retval);
293 /* Set brightness in backlight device */
294 pdata->bd->props.brightness = brightness;
296 /* save our data pointer in the interface device */
297 usb_set_intfdata(iface, pdata);
299 printk(KERN_INFO "appledisplay: Apple Cinema Display connected\n");
306 usb_kill_urb(pdata->urb);
307 cancel_delayed_work_sync(&pdata->work);
308 usb_free_coherent(pdata->udev, ACD_URB_BUFFER_LEN,
309 pdata->urbdata, pdata->urb->transfer_dma);
310 usb_free_urb(pdata->urb);
312 if (!IS_ERR(pdata->bd))
313 backlight_device_unregister(pdata->bd);
314 kfree(pdata->msgdata);
316 usb_set_intfdata(iface, NULL);
321 static void appledisplay_disconnect(struct usb_interface *iface)
323 struct appledisplay *pdata = usb_get_intfdata(iface);
326 usb_kill_urb(pdata->urb);
327 cancel_delayed_work_sync(&pdata->work);
328 backlight_device_unregister(pdata->bd);
329 usb_free_coherent(pdata->udev, ACD_URB_BUFFER_LEN,
330 pdata->urbdata, pdata->urb->transfer_dma);
331 usb_free_urb(pdata->urb);
332 kfree(pdata->msgdata);
336 printk(KERN_INFO "appledisplay: Apple Cinema Display disconnected\n");
339 static struct usb_driver appledisplay_driver = {
340 .name = "appledisplay",
341 .probe = appledisplay_probe,
342 .disconnect = appledisplay_disconnect,
343 .id_table = appledisplay_table,
345 module_usb_driver(appledisplay_driver);
347 MODULE_AUTHOR("Michael Hanselmann");
348 MODULE_DESCRIPTION("Apple Cinema Display driver");
349 MODULE_LICENSE("GPL");