4 * Copyright 2002-2005, Instant802 Networks, Inc.
5 * Copyright 2005-2006, Devicescape Software, Inc.
9 * This program is free software; you can redistribute it and/or modify
10 * it under the terms of the GNU General Public License version 2 as
11 * published by the Free Software Foundation.
13 #include <linux/slab.h>
14 #include <linux/kernel.h>
15 #include <linux/if_arp.h>
16 #include <linux/netdevice.h>
17 #include <linux/rtnetlink.h>
18 #include <net/mac80211.h>
19 #include <net/ieee80211_radiotap.h>
20 #include "ieee80211_i.h"
22 #include "debugfs_netdev.h"
25 #include "driver-ops.h"
30 * DOC: Interface list locking
32 * The interface list in each struct ieee80211_local is protected
35 * (1) modifications may only be done under the RTNL
36 * (2) modifications and readers are protected against each other by
38 * (3) modifications are done in an RCU manner so atomic readers
39 * can traverse the list in RCU-safe blocks.
41 * As a consequence, reads (traversals) of the list can be protected
42 * by either the RTNL, the iflist_mtx or RCU.
45 bool __ieee80211_recalc_txpower(struct ieee80211_sub_if_data *sdata)
47 struct ieee80211_chanctx_conf *chanctx_conf;
51 chanctx_conf = rcu_dereference(sdata->vif.chanctx_conf);
57 power = chanctx_conf->def.chan->max_power;
60 if (sdata->user_power_level != IEEE80211_UNSET_POWER_LEVEL)
61 power = min(power, sdata->user_power_level);
63 if (sdata->ap_power_level != IEEE80211_UNSET_POWER_LEVEL)
64 power = min(power, sdata->ap_power_level);
66 if (power != sdata->vif.bss_conf.txpower) {
67 sdata->vif.bss_conf.txpower = power;
68 ieee80211_hw_config(sdata->local, 0);
75 void ieee80211_recalc_txpower(struct ieee80211_sub_if_data *sdata)
77 if (__ieee80211_recalc_txpower(sdata))
78 ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_TXPOWER);
81 static u32 __ieee80211_idle_off(struct ieee80211_local *local)
83 if (!(local->hw.conf.flags & IEEE80211_CONF_IDLE))
86 local->hw.conf.flags &= ~IEEE80211_CONF_IDLE;
87 return IEEE80211_CONF_CHANGE_IDLE;
90 static u32 __ieee80211_idle_on(struct ieee80211_local *local)
92 if (local->hw.conf.flags & IEEE80211_CONF_IDLE)
95 ieee80211_flush_queues(local, NULL);
97 local->hw.conf.flags |= IEEE80211_CONF_IDLE;
98 return IEEE80211_CONF_CHANGE_IDLE;
101 static u32 __ieee80211_recalc_idle(struct ieee80211_local *local,
104 bool working = false, scanning, active;
105 unsigned int led_trig_start = 0, led_trig_stop = 0;
106 struct ieee80211_roc_work *roc;
108 lockdep_assert_held(&local->mtx);
110 active = force_active ||
111 !list_empty(&local->chanctx_list) ||
114 if (!local->ops->remain_on_channel) {
115 list_for_each_entry(roc, &local->roc_list, list) {
121 scanning = test_bit(SCAN_SW_SCANNING, &local->scanning) ||
122 test_bit(SCAN_ONCHANNEL_SCANNING, &local->scanning);
124 if (working || scanning)
125 led_trig_start |= IEEE80211_TPT_LEDTRIG_FL_WORK;
127 led_trig_stop |= IEEE80211_TPT_LEDTRIG_FL_WORK;
130 led_trig_start |= IEEE80211_TPT_LEDTRIG_FL_CONNECTED;
132 led_trig_stop |= IEEE80211_TPT_LEDTRIG_FL_CONNECTED;
134 ieee80211_mod_tpt_led_trig(local, led_trig_start, led_trig_stop);
136 if (working || scanning || active)
137 return __ieee80211_idle_off(local);
138 return __ieee80211_idle_on(local);
141 u32 ieee80211_idle_off(struct ieee80211_local *local)
143 return __ieee80211_recalc_idle(local, true);
146 void ieee80211_recalc_idle(struct ieee80211_local *local)
148 u32 change = __ieee80211_recalc_idle(local, false);
150 ieee80211_hw_config(local, change);
153 static int ieee80211_change_mtu(struct net_device *dev, int new_mtu)
155 if (new_mtu < 256 || new_mtu > IEEE80211_MAX_DATA_LEN)
162 static int ieee80211_verify_mac(struct ieee80211_local *local, u8 *addr)
164 struct ieee80211_sub_if_data *sdata;
169 if (is_zero_ether_addr(local->hw.wiphy->addr_mask))
173 new = ((u64)m[0] << 5*8) | ((u64)m[1] << 4*8) |
174 ((u64)m[2] << 3*8) | ((u64)m[3] << 2*8) |
175 ((u64)m[4] << 1*8) | ((u64)m[5] << 0*8);
177 m = local->hw.wiphy->addr_mask;
178 mask = ((u64)m[0] << 5*8) | ((u64)m[1] << 4*8) |
179 ((u64)m[2] << 3*8) | ((u64)m[3] << 2*8) |
180 ((u64)m[4] << 1*8) | ((u64)m[5] << 0*8);
183 mutex_lock(&local->iflist_mtx);
184 list_for_each_entry(sdata, &local->interfaces, list) {
185 if (sdata->vif.type == NL80211_IFTYPE_MONITOR)
189 tmp = ((u64)m[0] << 5*8) | ((u64)m[1] << 4*8) |
190 ((u64)m[2] << 3*8) | ((u64)m[3] << 2*8) |
191 ((u64)m[4] << 1*8) | ((u64)m[5] << 0*8);
193 if ((new & ~mask) != (tmp & ~mask)) {
198 mutex_unlock(&local->iflist_mtx);
203 static int ieee80211_change_mac(struct net_device *dev, void *addr)
205 struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
206 struct sockaddr *sa = addr;
209 if (ieee80211_sdata_running(sdata))
212 ret = ieee80211_verify_mac(sdata->local, sa->sa_data);
216 ret = eth_mac_addr(dev, sa);
219 memcpy(sdata->vif.addr, sa->sa_data, ETH_ALEN);
224 static inline int identical_mac_addr_allowed(int type1, int type2)
226 return type1 == NL80211_IFTYPE_MONITOR ||
227 type2 == NL80211_IFTYPE_MONITOR ||
228 type1 == NL80211_IFTYPE_P2P_DEVICE ||
229 type2 == NL80211_IFTYPE_P2P_DEVICE ||
230 (type1 == NL80211_IFTYPE_AP && type2 == NL80211_IFTYPE_WDS) ||
231 (type1 == NL80211_IFTYPE_WDS &&
232 (type2 == NL80211_IFTYPE_WDS ||
233 type2 == NL80211_IFTYPE_AP)) ||
234 (type1 == NL80211_IFTYPE_AP && type2 == NL80211_IFTYPE_AP_VLAN) ||
235 (type1 == NL80211_IFTYPE_AP_VLAN &&
236 (type2 == NL80211_IFTYPE_AP ||
237 type2 == NL80211_IFTYPE_AP_VLAN));
240 static int ieee80211_check_concurrent_iface(struct ieee80211_sub_if_data *sdata,
241 enum nl80211_iftype iftype)
243 struct ieee80211_local *local = sdata->local;
244 struct ieee80211_sub_if_data *nsdata;
248 /* we hold the RTNL here so can safely walk the list */
249 list_for_each_entry(nsdata, &local->interfaces, list) {
250 if (nsdata != sdata && ieee80211_sdata_running(nsdata)) {
252 * Allow only a single IBSS interface to be up at any
253 * time. This is restricted because beacon distribution
254 * cannot work properly if both are in the same IBSS.
256 * To remove this restriction we'd have to disallow them
257 * from setting the same SSID on different IBSS interfaces
258 * belonging to the same hardware. Then, however, we're
259 * faced with having to adopt two different TSF timers...
261 if (iftype == NL80211_IFTYPE_ADHOC &&
262 nsdata->vif.type == NL80211_IFTYPE_ADHOC)
266 * The remaining checks are only performed for interfaces
267 * with the same MAC address.
269 if (!ether_addr_equal(sdata->vif.addr,
274 * check whether it may have the same address
276 if (!identical_mac_addr_allowed(iftype,
281 * can only add VLANs to enabled APs
283 if (iftype == NL80211_IFTYPE_AP_VLAN &&
284 nsdata->vif.type == NL80211_IFTYPE_AP)
285 sdata->bss = &nsdata->u.ap;
292 static int ieee80211_check_queues(struct ieee80211_sub_if_data *sdata)
294 int n_queues = sdata->local->hw.queues;
297 if (sdata->vif.type != NL80211_IFTYPE_P2P_DEVICE) {
298 for (i = 0; i < IEEE80211_NUM_ACS; i++) {
299 if (WARN_ON_ONCE(sdata->vif.hw_queue[i] ==
300 IEEE80211_INVAL_HW_QUEUE))
302 if (WARN_ON_ONCE(sdata->vif.hw_queue[i] >=
308 if ((sdata->vif.type != NL80211_IFTYPE_AP &&
309 sdata->vif.type != NL80211_IFTYPE_MESH_POINT) ||
310 !(sdata->local->hw.flags & IEEE80211_HW_QUEUE_CONTROL)) {
311 sdata->vif.cab_queue = IEEE80211_INVAL_HW_QUEUE;
315 if (WARN_ON_ONCE(sdata->vif.cab_queue == IEEE80211_INVAL_HW_QUEUE))
318 if (WARN_ON_ONCE(sdata->vif.cab_queue >= n_queues))
324 void ieee80211_adjust_monitor_flags(struct ieee80211_sub_if_data *sdata,
327 struct ieee80211_local *local = sdata->local;
328 u32 flags = sdata->u.mntr_flags;
330 #define ADJUST(_f, _s) do { \
331 if (flags & MONITOR_FLAG_##_f) \
332 local->fif_##_s += offset; \
335 ADJUST(FCSFAIL, fcsfail);
336 ADJUST(PLCPFAIL, plcpfail);
337 ADJUST(CONTROL, control);
338 ADJUST(CONTROL, pspoll);
339 ADJUST(OTHER_BSS, other_bss);
344 static void ieee80211_set_default_queues(struct ieee80211_sub_if_data *sdata)
346 struct ieee80211_local *local = sdata->local;
349 for (i = 0; i < IEEE80211_NUM_ACS; i++) {
350 if (local->hw.flags & IEEE80211_HW_QUEUE_CONTROL)
351 sdata->vif.hw_queue[i] = IEEE80211_INVAL_HW_QUEUE;
352 else if (local->hw.queues >= IEEE80211_NUM_ACS)
353 sdata->vif.hw_queue[i] = i;
355 sdata->vif.hw_queue[i] = 0;
357 sdata->vif.cab_queue = IEEE80211_INVAL_HW_QUEUE;
360 int ieee80211_add_virtual_monitor(struct ieee80211_local *local)
362 struct ieee80211_sub_if_data *sdata;
365 if (!(local->hw.flags & IEEE80211_HW_WANT_MONITOR_VIF))
370 if (local->monitor_sdata)
373 sdata = kzalloc(sizeof(*sdata) + local->hw.vif_data_size, GFP_KERNEL);
378 sdata->local = local;
379 sdata->vif.type = NL80211_IFTYPE_MONITOR;
380 snprintf(sdata->name, IFNAMSIZ, "%s-monitor",
381 wiphy_name(local->hw.wiphy));
383 ieee80211_set_default_queues(sdata);
385 ret = drv_add_interface(local, sdata);
387 /* ok .. stupid driver, it asked for this! */
392 ret = ieee80211_check_queues(sdata);
398 ret = ieee80211_vif_use_channel(sdata, &local->monitor_chandef,
399 IEEE80211_CHANCTX_EXCLUSIVE);
401 drv_remove_interface(local, sdata);
406 mutex_lock(&local->iflist_mtx);
407 rcu_assign_pointer(local->monitor_sdata, sdata);
408 mutex_unlock(&local->iflist_mtx);
413 void ieee80211_del_virtual_monitor(struct ieee80211_local *local)
415 struct ieee80211_sub_if_data *sdata;
417 if (!(local->hw.flags & IEEE80211_HW_WANT_MONITOR_VIF))
422 mutex_lock(&local->iflist_mtx);
424 sdata = rcu_dereference_protected(local->monitor_sdata,
425 lockdep_is_held(&local->iflist_mtx));
427 mutex_unlock(&local->iflist_mtx);
431 rcu_assign_pointer(local->monitor_sdata, NULL);
432 mutex_unlock(&local->iflist_mtx);
436 ieee80211_vif_release_channel(sdata);
438 drv_remove_interface(local, sdata);
444 * NOTE: Be very careful when changing this function, it must NOT return
445 * an error on interface type changes that have been pre-checked, so most
446 * checks should be in ieee80211_check_concurrent_iface.
448 int ieee80211_do_open(struct wireless_dev *wdev, bool coming_up)
450 struct ieee80211_sub_if_data *sdata = IEEE80211_WDEV_TO_SUB_IF(wdev);
451 struct net_device *dev = wdev->netdev;
452 struct ieee80211_local *local = sdata->local;
453 struct sta_info *sta;
456 u32 hw_reconf_flags = 0;
458 switch (sdata->vif.type) {
459 case NL80211_IFTYPE_WDS:
460 if (!is_valid_ether_addr(sdata->u.wds.remote_addr))
463 case NL80211_IFTYPE_AP_VLAN: {
464 struct ieee80211_sub_if_data *master;
469 list_add(&sdata->u.vlan.list, &sdata->bss->vlans);
471 master = container_of(sdata->bss,
472 struct ieee80211_sub_if_data, u.ap);
473 sdata->control_port_protocol =
474 master->control_port_protocol;
475 sdata->control_port_no_encrypt =
476 master->control_port_no_encrypt;
479 case NL80211_IFTYPE_AP:
480 sdata->bss = &sdata->u.ap;
482 case NL80211_IFTYPE_MESH_POINT:
483 case NL80211_IFTYPE_STATION:
484 case NL80211_IFTYPE_MONITOR:
485 case NL80211_IFTYPE_ADHOC:
486 case NL80211_IFTYPE_P2P_DEVICE:
487 /* no special treatment */
489 case NL80211_IFTYPE_UNSPECIFIED:
490 case NUM_NL80211_IFTYPES:
491 case NL80211_IFTYPE_P2P_CLIENT:
492 case NL80211_IFTYPE_P2P_GO:
498 if (local->open_count == 0) {
499 res = drv_start(local);
502 /* we're brought up, everything changes */
503 hw_reconf_flags = ~0;
504 ieee80211_led_radio(local, true);
505 ieee80211_mod_tpt_led_trig(local,
506 IEEE80211_TPT_LEDTRIG_FL_RADIO, 0);
510 * Copy the hopefully now-present MAC address to
511 * this interface, if it has the special null one.
513 if (dev && is_zero_ether_addr(dev->dev_addr)) {
514 memcpy(dev->dev_addr,
515 local->hw.wiphy->perm_addr,
517 memcpy(dev->perm_addr, dev->dev_addr, ETH_ALEN);
519 if (!is_valid_ether_addr(dev->dev_addr)) {
520 res = -EADDRNOTAVAIL;
525 switch (sdata->vif.type) {
526 case NL80211_IFTYPE_AP_VLAN:
527 /* no need to tell driver, but set carrier and chanctx */
528 if (rtnl_dereference(sdata->bss->beacon)) {
529 ieee80211_vif_vlan_copy_chanctx(sdata);
530 netif_carrier_on(dev);
532 netif_carrier_off(dev);
535 case NL80211_IFTYPE_MONITOR:
536 if (sdata->u.mntr_flags & MONITOR_FLAG_COOK_FRAMES) {
537 local->cooked_mntrs++;
541 if (local->monitors == 0 && local->open_count == 0) {
542 res = ieee80211_add_virtual_monitor(local);
547 /* must be before the call to ieee80211_configure_filter */
549 if (local->monitors == 1) {
550 local->hw.conf.flags |= IEEE80211_CONF_MONITOR;
551 hw_reconf_flags |= IEEE80211_CONF_CHANGE_MONITOR;
554 ieee80211_adjust_monitor_flags(sdata, 1);
555 ieee80211_configure_filter(local);
556 mutex_lock(&local->mtx);
557 ieee80211_recalc_idle(local);
558 mutex_unlock(&local->mtx);
560 netif_carrier_on(dev);
564 ieee80211_del_virtual_monitor(local);
566 res = drv_add_interface(local, sdata);
569 res = ieee80211_check_queues(sdata);
571 goto err_del_interface;
574 if (sdata->vif.type == NL80211_IFTYPE_AP) {
576 local->fif_probe_req++;
578 ieee80211_configure_filter(local);
579 } else if (sdata->vif.type == NL80211_IFTYPE_ADHOC) {
580 local->fif_probe_req++;
583 if (sdata->vif.type != NL80211_IFTYPE_P2P_DEVICE)
584 changed |= ieee80211_reset_erp_info(sdata);
585 ieee80211_bss_info_change_notify(sdata, changed);
587 switch (sdata->vif.type) {
588 case NL80211_IFTYPE_STATION:
589 case NL80211_IFTYPE_ADHOC:
590 case NL80211_IFTYPE_AP:
591 case NL80211_IFTYPE_MESH_POINT:
592 netif_carrier_off(dev);
594 case NL80211_IFTYPE_WDS:
595 case NL80211_IFTYPE_P2P_DEVICE:
603 * set default queue parameters so drivers don't
604 * need to initialise the hardware if the hardware
605 * doesn't start up with sane defaults
607 ieee80211_set_wmm_default(sdata, true);
610 set_bit(SDATA_STATE_RUNNING, &sdata->state);
612 if (sdata->vif.type == NL80211_IFTYPE_WDS) {
613 /* Create STA entry for the WDS peer */
614 sta = sta_info_alloc(sdata, sdata->u.wds.remote_addr,
618 goto err_del_interface;
621 sta_info_pre_move_state(sta, IEEE80211_STA_AUTH);
622 sta_info_pre_move_state(sta, IEEE80211_STA_ASSOC);
623 sta_info_pre_move_state(sta, IEEE80211_STA_AUTHORIZED);
625 res = sta_info_insert(sta);
627 /* STA has been freed */
628 goto err_del_interface;
631 rate_control_rate_init(sta);
632 netif_carrier_on(dev);
633 } else if (sdata->vif.type == NL80211_IFTYPE_P2P_DEVICE) {
634 rcu_assign_pointer(local->p2p_sdata, sdata);
638 * set_multicast_list will be invoked by the networking core
639 * which will check whether any increments here were done in
640 * error and sync them down to the hardware as filter flags.
642 if (sdata->flags & IEEE80211_SDATA_ALLMULTI)
643 atomic_inc(&local->iff_allmultis);
645 if (sdata->flags & IEEE80211_SDATA_PROMISC)
646 atomic_inc(&local->iff_promiscs);
652 ieee80211_hw_config(local, hw_reconf_flags);
654 ieee80211_recalc_ps(local, -1);
658 int n_acs = IEEE80211_NUM_ACS;
661 if (local->hw.queues < IEEE80211_NUM_ACS)
664 spin_lock_irqsave(&local->queue_stop_reason_lock, flags);
665 if (sdata->vif.cab_queue == IEEE80211_INVAL_HW_QUEUE ||
666 (local->queue_stop_reasons[sdata->vif.cab_queue] == 0 &&
667 skb_queue_empty(&local->pending[sdata->vif.cab_queue]))) {
668 for (ac = 0; ac < n_acs; ac++) {
669 int ac_queue = sdata->vif.hw_queue[ac];
671 if (local->queue_stop_reasons[ac_queue] == 0 &&
672 skb_queue_empty(&local->pending[ac_queue]))
673 netif_start_subqueue(dev, ac);
676 spin_unlock_irqrestore(&local->queue_stop_reason_lock, flags);
681 drv_remove_interface(local, sdata);
683 if (!local->open_count)
687 if (sdata->vif.type == NL80211_IFTYPE_AP_VLAN)
688 list_del(&sdata->u.vlan.list);
689 /* might already be clear but that doesn't matter */
690 clear_bit(SDATA_STATE_RUNNING, &sdata->state);
694 static int ieee80211_open(struct net_device *dev)
696 struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
699 /* fail early if user set an invalid address */
700 if (!is_valid_ether_addr(dev->dev_addr))
701 return -EADDRNOTAVAIL;
703 err = ieee80211_check_concurrent_iface(sdata, sdata->vif.type);
707 return ieee80211_do_open(&sdata->wdev, true);
710 static void ieee80211_do_stop(struct ieee80211_sub_if_data *sdata,
713 struct ieee80211_local *local = sdata->local;
715 struct sk_buff *skb, *tmp;
716 u32 hw_reconf_flags = 0;
720 clear_bit(SDATA_STATE_RUNNING, &sdata->state);
722 if (rcu_access_pointer(local->scan_sdata) == sdata)
723 ieee80211_scan_cancel(local);
726 * Stop TX on this interface first.
729 netif_tx_stop_all_queues(sdata->dev);
731 ieee80211_roc_purge(local, sdata);
733 if (sdata->vif.type == NL80211_IFTYPE_STATION)
734 ieee80211_mgd_stop(sdata);
737 * Remove all stations associated with this interface.
739 * This must be done before calling ops->remove_interface()
740 * because otherwise we can later invoke ops->sta_notify()
741 * whenever the STAs are removed, and that invalidates driver
742 * assumptions about always getting a vif pointer that is valid
743 * (because if we remove a STA after ops->remove_interface()
744 * the driver will have removed the vif info already!)
746 * This is relevant only in WDS mode, in all other modes we've
747 * already removed all stations when disconnecting or similar,
750 * We call sta_info_flush_cleanup() later, to combine RCU waits.
752 flushed = sta_info_flush_defer(sdata);
753 WARN_ON_ONCE((sdata->vif.type != NL80211_IFTYPE_WDS && flushed > 0) ||
754 (sdata->vif.type == NL80211_IFTYPE_WDS && flushed != 1));
756 /* don't count this interface for promisc/allmulti while it is down */
757 if (sdata->flags & IEEE80211_SDATA_ALLMULTI)
758 atomic_dec(&local->iff_allmultis);
760 if (sdata->flags & IEEE80211_SDATA_PROMISC)
761 atomic_dec(&local->iff_promiscs);
763 if (sdata->vif.type == NL80211_IFTYPE_AP) {
765 local->fif_probe_req--;
766 } else if (sdata->vif.type == NL80211_IFTYPE_ADHOC) {
767 local->fif_probe_req--;
771 netif_addr_lock_bh(sdata->dev);
772 spin_lock_bh(&local->filter_lock);
773 __hw_addr_unsync(&local->mc_list, &sdata->dev->mc,
774 sdata->dev->addr_len);
775 spin_unlock_bh(&local->filter_lock);
776 netif_addr_unlock_bh(sdata->dev);
779 del_timer_sync(&local->dynamic_ps_timer);
780 cancel_work_sync(&local->dynamic_ps_enable_work);
782 cancel_work_sync(&sdata->recalc_smps);
784 cancel_delayed_work_sync(&sdata->dfs_cac_timer_work);
786 if (sdata->wdev.cac_started) {
787 WARN_ON(local->suspended);
788 mutex_lock(&local->iflist_mtx);
789 ieee80211_vif_release_channel(sdata);
790 mutex_unlock(&local->iflist_mtx);
791 cfg80211_cac_event(sdata->dev, NL80211_RADAR_CAC_ABORTED,
795 /* APs need special treatment */
796 if (sdata->vif.type == NL80211_IFTYPE_AP) {
797 struct ieee80211_sub_if_data *vlan, *tmpsdata;
799 /* down all dependent devices, that is VLANs */
800 list_for_each_entry_safe(vlan, tmpsdata, &sdata->u.ap.vlans,
802 dev_close(vlan->dev);
803 WARN_ON(!list_empty(&sdata->u.ap.vlans));
804 } else if (sdata->vif.type == NL80211_IFTYPE_AP_VLAN) {
805 /* remove all packets in parent bc_buf pointing to this dev */
806 ps = &sdata->bss->ps;
808 spin_lock_irqsave(&ps->bc_buf.lock, flags);
809 skb_queue_walk_safe(&ps->bc_buf, skb, tmp) {
810 if (skb->dev == sdata->dev) {
811 __skb_unlink(skb, &ps->bc_buf);
812 local->total_ps_buffered--;
813 ieee80211_free_txskb(&local->hw, skb);
816 spin_unlock_irqrestore(&ps->bc_buf.lock, flags);
822 switch (sdata->vif.type) {
823 case NL80211_IFTYPE_AP_VLAN:
824 list_del(&sdata->u.vlan.list);
825 rcu_assign_pointer(sdata->vif.chanctx_conf, NULL);
826 /* no need to tell driver */
828 case NL80211_IFTYPE_MONITOR:
829 if (sdata->u.mntr_flags & MONITOR_FLAG_COOK_FRAMES) {
830 local->cooked_mntrs--;
835 if (local->monitors == 0) {
836 local->hw.conf.flags &= ~IEEE80211_CONF_MONITOR;
837 hw_reconf_flags |= IEEE80211_CONF_CHANGE_MONITOR;
840 ieee80211_adjust_monitor_flags(sdata, -1);
842 case NL80211_IFTYPE_P2P_DEVICE:
843 /* relies on synchronize_rcu() below */
844 rcu_assign_pointer(local->p2p_sdata, NULL);
847 cancel_work_sync(&sdata->work);
849 * When we get here, the interface is marked down.
851 * sta_info_flush_cleanup() requires rcu_barrier()
852 * first to wait for the station call_rcu() calls
853 * to complete, and we also need synchronize_rcu()
854 * to wait for the RX path in case it is using the
855 * interface and enqueuing frames at this very time on
860 sta_info_flush_cleanup(sdata);
863 * Free all remaining keys, there shouldn't be any,
864 * except maybe in WDS mode?
866 ieee80211_free_keys(sdata);
869 case NL80211_IFTYPE_AP:
870 skb_queue_purge(&sdata->skb_queue);
875 spin_lock_irqsave(&local->queue_stop_reason_lock, flags);
876 for (i = 0; i < IEEE80211_MAX_QUEUES; i++) {
877 skb_queue_walk_safe(&local->pending[i], skb, tmp) {
878 struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
879 if (info->control.vif == &sdata->vif) {
880 __skb_unlink(skb, &local->pending[i]);
881 ieee80211_free_txskb(&local->hw, skb);
885 spin_unlock_irqrestore(&local->queue_stop_reason_lock, flags);
887 if (local->open_count == 0)
888 ieee80211_clear_tx_pending(local);
891 * If the interface goes down while suspended, presumably because
892 * the device was unplugged and that happens before our resume,
893 * then the driver is already unconfigured and the remainder of
894 * this function isn't needed.
895 * XXX: what about WoWLAN? If the device has software state, e.g.
896 * memory allocated, it might expect teardown commands from
899 if (local->suspended) {
900 WARN_ON(local->wowlan);
901 WARN_ON(rtnl_dereference(local->monitor_sdata));
905 switch (sdata->vif.type) {
906 case NL80211_IFTYPE_AP_VLAN:
908 case NL80211_IFTYPE_MONITOR:
909 if (local->monitors == 0)
910 ieee80211_del_virtual_monitor(local);
912 mutex_lock(&local->mtx);
913 ieee80211_recalc_idle(local);
914 mutex_unlock(&local->mtx);
918 drv_remove_interface(local, sdata);
921 ieee80211_recalc_ps(local, -1);
923 if (local->open_count == 0) {
924 ieee80211_stop_device(local);
926 /* no reconfiguring after stop! */
930 /* do after stop to avoid reconfiguring when we stop anyway */
931 ieee80211_configure_filter(local);
932 ieee80211_hw_config(local, hw_reconf_flags);
934 if (local->monitors == local->open_count)
935 ieee80211_add_virtual_monitor(local);
938 static int ieee80211_stop(struct net_device *dev)
940 struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
942 ieee80211_do_stop(sdata, true);
947 static void ieee80211_set_multicast_list(struct net_device *dev)
949 struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
950 struct ieee80211_local *local = sdata->local;
951 int allmulti, promisc, sdata_allmulti, sdata_promisc;
953 allmulti = !!(dev->flags & IFF_ALLMULTI);
954 promisc = !!(dev->flags & IFF_PROMISC);
955 sdata_allmulti = !!(sdata->flags & IEEE80211_SDATA_ALLMULTI);
956 sdata_promisc = !!(sdata->flags & IEEE80211_SDATA_PROMISC);
958 if (allmulti != sdata_allmulti) {
959 if (dev->flags & IFF_ALLMULTI)
960 atomic_inc(&local->iff_allmultis);
962 atomic_dec(&local->iff_allmultis);
963 sdata->flags ^= IEEE80211_SDATA_ALLMULTI;
966 if (promisc != sdata_promisc) {
967 if (dev->flags & IFF_PROMISC)
968 atomic_inc(&local->iff_promiscs);
970 atomic_dec(&local->iff_promiscs);
971 sdata->flags ^= IEEE80211_SDATA_PROMISC;
975 * TODO: If somebody needs this on AP interfaces,
976 * it can be enabled easily but multicast
977 * addresses from VLANs need to be synced.
979 if (sdata->vif.type != NL80211_IFTYPE_MONITOR &&
980 sdata->vif.type != NL80211_IFTYPE_AP_VLAN &&
981 sdata->vif.type != NL80211_IFTYPE_AP)
982 drv_set_multicast_list(local, sdata, &dev->mc);
984 spin_lock_bh(&local->filter_lock);
985 __hw_addr_sync(&local->mc_list, &dev->mc, dev->addr_len);
986 spin_unlock_bh(&local->filter_lock);
987 ieee80211_queue_work(&local->hw, &local->reconfig_filter);
991 * Called when the netdev is removed or, by the code below, before
992 * the interface type changes.
994 static void ieee80211_teardown_sdata(struct ieee80211_sub_if_data *sdata)
999 /* free extra data */
1000 ieee80211_free_keys(sdata);
1002 ieee80211_debugfs_remove_netdev(sdata);
1004 for (i = 0; i < IEEE80211_FRAGMENT_MAX; i++)
1005 __skb_queue_purge(&sdata->fragments[i].skb_list);
1006 sdata->fragment_next = 0;
1008 if (ieee80211_vif_is_mesh(&sdata->vif))
1009 mesh_rmc_free(sdata);
1011 flushed = sta_info_flush(sdata);
1015 static void ieee80211_uninit(struct net_device *dev)
1017 ieee80211_teardown_sdata(IEEE80211_DEV_TO_SUB_IF(dev));
1020 static u16 ieee80211_netdev_select_queue(struct net_device *dev,
1021 struct sk_buff *skb)
1023 return ieee80211_select_queue(IEEE80211_DEV_TO_SUB_IF(dev), skb);
1026 static const struct net_device_ops ieee80211_dataif_ops = {
1027 .ndo_open = ieee80211_open,
1028 .ndo_stop = ieee80211_stop,
1029 .ndo_uninit = ieee80211_uninit,
1030 .ndo_start_xmit = ieee80211_subif_start_xmit,
1031 .ndo_set_rx_mode = ieee80211_set_multicast_list,
1032 .ndo_change_mtu = ieee80211_change_mtu,
1033 .ndo_set_mac_address = ieee80211_change_mac,
1034 .ndo_select_queue = ieee80211_netdev_select_queue,
1037 static u16 ieee80211_monitor_select_queue(struct net_device *dev,
1038 struct sk_buff *skb)
1040 struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
1041 struct ieee80211_local *local = sdata->local;
1042 struct ieee80211_hdr *hdr;
1043 struct ieee80211_radiotap_header *rtap = (void *)skb->data;
1045 if (local->hw.queues < IEEE80211_NUM_ACS)
1049 skb->len < le16_to_cpu(rtap->it_len) + 2 /* frame control */)
1050 return 0; /* doesn't matter, frame will be dropped */
1052 hdr = (void *)((u8 *)skb->data + le16_to_cpu(rtap->it_len));
1054 return ieee80211_select_queue_80211(sdata, skb, hdr);
1057 static const struct net_device_ops ieee80211_monitorif_ops = {
1058 .ndo_open = ieee80211_open,
1059 .ndo_stop = ieee80211_stop,
1060 .ndo_uninit = ieee80211_uninit,
1061 .ndo_start_xmit = ieee80211_monitor_start_xmit,
1062 .ndo_set_rx_mode = ieee80211_set_multicast_list,
1063 .ndo_change_mtu = ieee80211_change_mtu,
1064 .ndo_set_mac_address = eth_mac_addr,
1065 .ndo_select_queue = ieee80211_monitor_select_queue,
1068 static void ieee80211_if_setup(struct net_device *dev)
1071 dev->priv_flags &= ~IFF_TX_SKB_SHARING;
1072 dev->netdev_ops = &ieee80211_dataif_ops;
1073 dev->destructor = free_netdev;
1076 static void ieee80211_iface_work(struct work_struct *work)
1078 struct ieee80211_sub_if_data *sdata =
1079 container_of(work, struct ieee80211_sub_if_data, work);
1080 struct ieee80211_local *local = sdata->local;
1081 struct sk_buff *skb;
1082 struct sta_info *sta;
1083 struct ieee80211_ra_tid *ra_tid;
1085 if (!ieee80211_sdata_running(sdata))
1088 if (local->scanning)
1092 * ieee80211_queue_work() should have picked up most cases,
1093 * here we'll pick the rest.
1095 if (WARN(local->suspended,
1096 "interface work scheduled while going to suspend\n"))
1099 /* first process frames */
1100 while ((skb = skb_dequeue(&sdata->skb_queue))) {
1101 struct ieee80211_mgmt *mgmt = (void *)skb->data;
1103 if (skb->pkt_type == IEEE80211_SDATA_QUEUE_AGG_START) {
1104 ra_tid = (void *)&skb->cb;
1105 ieee80211_start_tx_ba_cb(&sdata->vif, ra_tid->ra,
1107 } else if (skb->pkt_type == IEEE80211_SDATA_QUEUE_AGG_STOP) {
1108 ra_tid = (void *)&skb->cb;
1109 ieee80211_stop_tx_ba_cb(&sdata->vif, ra_tid->ra,
1111 } else if (ieee80211_is_action(mgmt->frame_control) &&
1112 mgmt->u.action.category == WLAN_CATEGORY_BACK) {
1115 mutex_lock(&local->sta_mtx);
1116 sta = sta_info_get_bss(sdata, mgmt->sa);
1118 switch (mgmt->u.action.u.addba_req.action_code) {
1119 case WLAN_ACTION_ADDBA_REQ:
1120 ieee80211_process_addba_request(
1121 local, sta, mgmt, len);
1123 case WLAN_ACTION_ADDBA_RESP:
1124 ieee80211_process_addba_resp(local, sta,
1127 case WLAN_ACTION_DELBA:
1128 ieee80211_process_delba(sdata, sta,
1136 mutex_unlock(&local->sta_mtx);
1137 } else if (ieee80211_is_data_qos(mgmt->frame_control)) {
1138 struct ieee80211_hdr *hdr = (void *)mgmt;
1140 * So the frame isn't mgmt, but frame_control
1141 * is at the right place anyway, of course, so
1142 * the if statement is correct.
1144 * Warn if we have other data frame types here,
1145 * they must not get here.
1147 WARN_ON(hdr->frame_control &
1148 cpu_to_le16(IEEE80211_STYPE_NULLFUNC));
1149 WARN_ON(!(hdr->seq_ctrl &
1150 cpu_to_le16(IEEE80211_SCTL_FRAG)));
1152 * This was a fragment of a frame, received while
1153 * a block-ack session was active. That cannot be
1154 * right, so terminate the session.
1156 mutex_lock(&local->sta_mtx);
1157 sta = sta_info_get_bss(sdata, mgmt->sa);
1159 u16 tid = *ieee80211_get_qos_ctl(hdr) &
1160 IEEE80211_QOS_CTL_TID_MASK;
1162 __ieee80211_stop_rx_ba_session(
1163 sta, tid, WLAN_BACK_RECIPIENT,
1164 WLAN_REASON_QSTA_REQUIRE_SETUP,
1167 mutex_unlock(&local->sta_mtx);
1168 } else switch (sdata->vif.type) {
1169 case NL80211_IFTYPE_STATION:
1170 ieee80211_sta_rx_queued_mgmt(sdata, skb);
1172 case NL80211_IFTYPE_ADHOC:
1173 ieee80211_ibss_rx_queued_mgmt(sdata, skb);
1175 case NL80211_IFTYPE_MESH_POINT:
1176 if (!ieee80211_vif_is_mesh(&sdata->vif))
1178 ieee80211_mesh_rx_queued_mgmt(sdata, skb);
1181 WARN(1, "frame for unexpected interface type");
1188 /* then other type-dependent work */
1189 switch (sdata->vif.type) {
1190 case NL80211_IFTYPE_STATION:
1191 ieee80211_sta_work(sdata);
1193 case NL80211_IFTYPE_ADHOC:
1194 ieee80211_ibss_work(sdata);
1196 case NL80211_IFTYPE_MESH_POINT:
1197 if (!ieee80211_vif_is_mesh(&sdata->vif))
1199 ieee80211_mesh_work(sdata);
1206 static void ieee80211_recalc_smps_work(struct work_struct *work)
1208 struct ieee80211_sub_if_data *sdata =
1209 container_of(work, struct ieee80211_sub_if_data, recalc_smps);
1211 ieee80211_recalc_smps(sdata);
1215 * Helper function to initialise an interface to a specific type.
1217 static void ieee80211_setup_sdata(struct ieee80211_sub_if_data *sdata,
1218 enum nl80211_iftype type)
1220 /* clear type-dependent union */
1221 memset(&sdata->u, 0, sizeof(sdata->u));
1223 /* and set some type-dependent values */
1224 sdata->vif.type = type;
1225 sdata->vif.p2p = false;
1226 sdata->wdev.iftype = type;
1228 sdata->control_port_protocol = cpu_to_be16(ETH_P_PAE);
1229 sdata->control_port_no_encrypt = false;
1231 sdata->noack_map = 0;
1233 /* only monitor/p2p-device differ */
1235 sdata->dev->netdev_ops = &ieee80211_dataif_ops;
1236 sdata->dev->type = ARPHRD_ETHER;
1239 skb_queue_head_init(&sdata->skb_queue);
1240 INIT_WORK(&sdata->work, ieee80211_iface_work);
1241 INIT_WORK(&sdata->recalc_smps, ieee80211_recalc_smps_work);
1244 case NL80211_IFTYPE_P2P_GO:
1245 type = NL80211_IFTYPE_AP;
1246 sdata->vif.type = type;
1247 sdata->vif.p2p = true;
1249 case NL80211_IFTYPE_AP:
1250 skb_queue_head_init(&sdata->u.ap.ps.bc_buf);
1251 INIT_LIST_HEAD(&sdata->u.ap.vlans);
1252 sdata->vif.bss_conf.bssid = sdata->vif.addr;
1254 case NL80211_IFTYPE_P2P_CLIENT:
1255 type = NL80211_IFTYPE_STATION;
1256 sdata->vif.type = type;
1257 sdata->vif.p2p = true;
1259 case NL80211_IFTYPE_STATION:
1260 sdata->vif.bss_conf.bssid = sdata->u.mgd.bssid;
1261 ieee80211_sta_setup_sdata(sdata);
1263 case NL80211_IFTYPE_ADHOC:
1264 sdata->vif.bss_conf.bssid = sdata->u.ibss.bssid;
1265 ieee80211_ibss_setup_sdata(sdata);
1267 case NL80211_IFTYPE_MESH_POINT:
1268 if (ieee80211_vif_is_mesh(&sdata->vif))
1269 ieee80211_mesh_init_sdata(sdata);
1271 case NL80211_IFTYPE_MONITOR:
1272 sdata->dev->type = ARPHRD_IEEE80211_RADIOTAP;
1273 sdata->dev->netdev_ops = &ieee80211_monitorif_ops;
1274 sdata->u.mntr_flags = MONITOR_FLAG_CONTROL |
1275 MONITOR_FLAG_OTHER_BSS;
1277 case NL80211_IFTYPE_WDS:
1278 sdata->vif.bss_conf.bssid = NULL;
1280 case NL80211_IFTYPE_AP_VLAN:
1282 case NL80211_IFTYPE_P2P_DEVICE:
1283 sdata->vif.bss_conf.bssid = sdata->vif.addr;
1285 case NL80211_IFTYPE_UNSPECIFIED:
1286 case NUM_NL80211_IFTYPES:
1291 ieee80211_debugfs_add_netdev(sdata);
1294 static int ieee80211_runtime_change_iftype(struct ieee80211_sub_if_data *sdata,
1295 enum nl80211_iftype type)
1297 struct ieee80211_local *local = sdata->local;
1299 enum nl80211_iftype internal_type = type;
1304 if (!local->ops->change_interface)
1307 switch (sdata->vif.type) {
1308 case NL80211_IFTYPE_AP:
1309 case NL80211_IFTYPE_STATION:
1310 case NL80211_IFTYPE_ADHOC:
1312 * Could maybe also all others here?
1313 * Just not sure how that interacts
1314 * with the RX/config path e.g. for
1323 case NL80211_IFTYPE_AP:
1324 case NL80211_IFTYPE_STATION:
1325 case NL80211_IFTYPE_ADHOC:
1327 * Could probably support everything
1328 * but WDS here (WDS do_open can fail
1329 * under memory pressure, which this
1330 * code isn't prepared to handle).
1333 case NL80211_IFTYPE_P2P_CLIENT:
1335 internal_type = NL80211_IFTYPE_STATION;
1337 case NL80211_IFTYPE_P2P_GO:
1339 internal_type = NL80211_IFTYPE_AP;
1345 ret = ieee80211_check_concurrent_iface(sdata, internal_type);
1349 ieee80211_do_stop(sdata, false);
1351 ieee80211_teardown_sdata(sdata);
1353 ret = drv_change_interface(local, sdata, internal_type, p2p);
1355 type = sdata->vif.type;
1358 * Ignore return value here, there's not much we can do since
1359 * the driver changed the interface type internally already.
1360 * The warnings will hopefully make driver authors fix it :-)
1362 ieee80211_check_queues(sdata);
1364 ieee80211_setup_sdata(sdata, type);
1366 err = ieee80211_do_open(&sdata->wdev, false);
1367 WARN(err, "type change: do_open returned %d", err);
1372 int ieee80211_if_change_type(struct ieee80211_sub_if_data *sdata,
1373 enum nl80211_iftype type)
1379 if (type == ieee80211_vif_type_p2p(&sdata->vif))
1382 if (ieee80211_sdata_running(sdata)) {
1383 ret = ieee80211_runtime_change_iftype(sdata, type);
1387 /* Purge and reset type-dependent state. */
1388 ieee80211_teardown_sdata(sdata);
1389 ieee80211_setup_sdata(sdata, type);
1392 /* reset some values that shouldn't be kept across type changes */
1393 sdata->drop_unencrypted = 0;
1394 if (type == NL80211_IFTYPE_STATION)
1395 sdata->u.mgd.use_4addr = false;
1400 static void ieee80211_assign_perm_addr(struct ieee80211_local *local,
1401 u8 *perm_addr, enum nl80211_iftype type)
1403 struct ieee80211_sub_if_data *sdata;
1404 u64 mask, start, addr, val, inc;
1406 u8 tmp_addr[ETH_ALEN];
1409 /* default ... something at least */
1410 memcpy(perm_addr, local->hw.wiphy->perm_addr, ETH_ALEN);
1412 if (is_zero_ether_addr(local->hw.wiphy->addr_mask) &&
1413 local->hw.wiphy->n_addresses <= 1)
1416 mutex_lock(&local->iflist_mtx);
1419 case NL80211_IFTYPE_MONITOR:
1420 /* doesn't matter */
1422 case NL80211_IFTYPE_WDS:
1423 case NL80211_IFTYPE_AP_VLAN:
1424 /* match up with an AP interface */
1425 list_for_each_entry(sdata, &local->interfaces, list) {
1426 if (sdata->vif.type != NL80211_IFTYPE_AP)
1428 memcpy(perm_addr, sdata->vif.addr, ETH_ALEN);
1431 /* keep default if no AP interface present */
1433 case NL80211_IFTYPE_P2P_CLIENT:
1434 case NL80211_IFTYPE_P2P_GO:
1435 if (local->hw.flags & IEEE80211_HW_P2P_DEV_ADDR_FOR_INTF) {
1436 list_for_each_entry(sdata, &local->interfaces, list) {
1437 if (sdata->vif.type != NL80211_IFTYPE_P2P_DEVICE)
1439 if (!ieee80211_sdata_running(sdata))
1441 memcpy(perm_addr, sdata->vif.addr, ETH_ALEN);
1445 /* otherwise fall through */
1447 /* assign a new address if possible -- try n_addresses first */
1448 for (i = 0; i < local->hw.wiphy->n_addresses; i++) {
1451 list_for_each_entry(sdata, &local->interfaces, list) {
1452 if (memcmp(local->hw.wiphy->addresses[i].addr,
1453 sdata->vif.addr, ETH_ALEN) == 0) {
1461 local->hw.wiphy->addresses[i].addr,
1467 /* try mask if available */
1468 if (is_zero_ether_addr(local->hw.wiphy->addr_mask))
1471 m = local->hw.wiphy->addr_mask;
1472 mask = ((u64)m[0] << 5*8) | ((u64)m[1] << 4*8) |
1473 ((u64)m[2] << 3*8) | ((u64)m[3] << 2*8) |
1474 ((u64)m[4] << 1*8) | ((u64)m[5] << 0*8);
1476 if (__ffs64(mask) + hweight64(mask) != fls64(mask)) {
1477 /* not a contiguous mask ... not handled now! */
1478 pr_info("not contiguous\n");
1482 m = local->hw.wiphy->perm_addr;
1483 start = ((u64)m[0] << 5*8) | ((u64)m[1] << 4*8) |
1484 ((u64)m[2] << 3*8) | ((u64)m[3] << 2*8) |
1485 ((u64)m[4] << 1*8) | ((u64)m[5] << 0*8);
1487 inc = 1ULL<<__ffs64(mask);
1488 val = (start & mask);
1489 addr = (start & ~mask) | (val & mask);
1493 tmp_addr[5] = addr >> 0*8;
1494 tmp_addr[4] = addr >> 1*8;
1495 tmp_addr[3] = addr >> 2*8;
1496 tmp_addr[2] = addr >> 3*8;
1497 tmp_addr[1] = addr >> 4*8;
1498 tmp_addr[0] = addr >> 5*8;
1502 list_for_each_entry(sdata, &local->interfaces, list) {
1503 if (memcmp(tmp_addr, sdata->vif.addr,
1511 memcpy(perm_addr, tmp_addr, ETH_ALEN);
1514 addr = (start & ~mask) | (val & mask);
1515 } while (addr != start);
1521 mutex_unlock(&local->iflist_mtx);
1524 static void ieee80211_cleanup_sdata_stas_wk(struct work_struct *wk)
1526 struct ieee80211_sub_if_data *sdata;
1528 sdata = container_of(wk, struct ieee80211_sub_if_data, cleanup_stations_wk);
1530 ieee80211_cleanup_sdata_stas(sdata);
1533 int ieee80211_if_add(struct ieee80211_local *local, const char *name,
1534 struct wireless_dev **new_wdev, enum nl80211_iftype type,
1535 struct vif_params *params)
1537 struct net_device *ndev = NULL;
1538 struct ieee80211_sub_if_data *sdata = NULL;
1544 if (type == NL80211_IFTYPE_P2P_DEVICE) {
1545 struct wireless_dev *wdev;
1547 sdata = kzalloc(sizeof(*sdata) + local->hw.vif_data_size,
1551 wdev = &sdata->wdev;
1554 strlcpy(sdata->name, name, IFNAMSIZ);
1555 ieee80211_assign_perm_addr(local, wdev->address, type);
1556 memcpy(sdata->vif.addr, wdev->address, ETH_ALEN);
1558 if (local->hw.queues >= IEEE80211_NUM_ACS)
1559 txqs = IEEE80211_NUM_ACS;
1561 ndev = alloc_netdev_mqs(sizeof(*sdata) +
1562 local->hw.vif_data_size,
1563 name, ieee80211_if_setup, txqs, 1);
1566 dev_net_set(ndev, wiphy_net(local->hw.wiphy));
1568 ndev->needed_headroom = local->tx_headroom +
1569 4*6 /* four MAC addresses */
1570 + 2 + 2 + 2 + 2 /* ctl, dur, seq, qos */
1572 + 8 /* rfc1042/bridge tunnel */
1573 - ETH_HLEN /* ethernet hard_header_len */
1574 + IEEE80211_ENCRYPT_HEADROOM;
1575 ndev->needed_tailroom = IEEE80211_ENCRYPT_TAILROOM;
1577 ret = dev_alloc_name(ndev, ndev->name);
1583 ieee80211_assign_perm_addr(local, ndev->perm_addr, type);
1584 memcpy(ndev->dev_addr, ndev->perm_addr, ETH_ALEN);
1585 SET_NETDEV_DEV(ndev, wiphy_dev(local->hw.wiphy));
1587 /* don't use IEEE80211_DEV_TO_SUB_IF -- it checks too much */
1588 sdata = netdev_priv(ndev);
1589 ndev->ieee80211_ptr = &sdata->wdev;
1590 memcpy(sdata->vif.addr, ndev->dev_addr, ETH_ALEN);
1591 memcpy(sdata->name, ndev->name, IFNAMSIZ);
1596 /* initialise type-independent data */
1597 sdata->wdev.wiphy = local->hw.wiphy;
1598 sdata->local = local;
1600 for (i = 0; i < IEEE80211_FRAGMENT_MAX; i++)
1601 skb_queue_head_init(&sdata->fragments[i].skb_list);
1603 INIT_LIST_HEAD(&sdata->key_list);
1605 spin_lock_init(&sdata->cleanup_stations_lock);
1606 INIT_LIST_HEAD(&sdata->cleanup_stations);
1607 INIT_WORK(&sdata->cleanup_stations_wk, ieee80211_cleanup_sdata_stas_wk);
1608 INIT_DELAYED_WORK(&sdata->dfs_cac_timer_work,
1609 ieee80211_dfs_cac_timer_work);
1610 INIT_DELAYED_WORK(&sdata->dec_tailroom_needed_wk,
1611 ieee80211_delayed_tailroom_dec);
1613 for (i = 0; i < IEEE80211_NUM_BANDS; i++) {
1614 struct ieee80211_supported_band *sband;
1615 sband = local->hw.wiphy->bands[i];
1616 sdata->rc_rateidx_mask[i] =
1617 sband ? (1 << sband->n_bitrates) - 1 : 0;
1619 memcpy(sdata->rc_rateidx_mcs_mask[i],
1620 sband->ht_cap.mcs.rx_mask,
1621 sizeof(sdata->rc_rateidx_mcs_mask[i]));
1623 memset(sdata->rc_rateidx_mcs_mask[i], 0,
1624 sizeof(sdata->rc_rateidx_mcs_mask[i]));
1627 ieee80211_set_default_queues(sdata);
1629 sdata->ap_power_level = IEEE80211_UNSET_POWER_LEVEL;
1630 sdata->user_power_level = local->user_power_level;
1632 /* setup type-dependent data */
1633 ieee80211_setup_sdata(sdata, type);
1637 ndev->ieee80211_ptr->use_4addr = params->use_4addr;
1638 if (type == NL80211_IFTYPE_STATION)
1639 sdata->u.mgd.use_4addr = params->use_4addr;
1642 ndev->features |= local->hw.netdev_features;
1644 ret = register_netdevice(ndev);
1651 mutex_lock(&local->iflist_mtx);
1652 list_add_tail_rcu(&sdata->list, &local->interfaces);
1653 mutex_unlock(&local->iflist_mtx);
1656 *new_wdev = &sdata->wdev;
1661 void ieee80211_if_remove(struct ieee80211_sub_if_data *sdata)
1665 mutex_lock(&sdata->local->iflist_mtx);
1666 list_del_rcu(&sdata->list);
1667 mutex_unlock(&sdata->local->iflist_mtx);
1672 unregister_netdevice(sdata->dev);
1674 cfg80211_unregister_wdev(&sdata->wdev);
1679 void ieee80211_sdata_stop(struct ieee80211_sub_if_data *sdata)
1681 if (WARN_ON_ONCE(!test_bit(SDATA_STATE_RUNNING, &sdata->state)))
1683 ieee80211_do_stop(sdata, true);
1684 ieee80211_teardown_sdata(sdata);
1688 * Remove all interfaces, may only be called at hardware unregistration
1689 * time because it doesn't do RCU-safe list removals.
1691 void ieee80211_remove_interfaces(struct ieee80211_local *local)
1693 struct ieee80211_sub_if_data *sdata, *tmp;
1694 LIST_HEAD(unreg_list);
1695 LIST_HEAD(wdev_list);
1699 mutex_lock(&local->iflist_mtx);
1700 list_for_each_entry_safe(sdata, tmp, &local->interfaces, list) {
1701 list_del(&sdata->list);
1704 unregister_netdevice_queue(sdata->dev, &unreg_list);
1706 list_add(&sdata->list, &wdev_list);
1708 mutex_unlock(&local->iflist_mtx);
1709 unregister_netdevice_many(&unreg_list);
1710 list_del(&unreg_list);
1712 list_for_each_entry_safe(sdata, tmp, &wdev_list, list) {
1713 list_del(&sdata->list);
1714 cfg80211_unregister_wdev(&sdata->wdev);
1719 static int netdev_notify(struct notifier_block *nb,
1720 unsigned long state,
1723 struct net_device *dev = ndev;
1724 struct ieee80211_sub_if_data *sdata;
1726 if (state != NETDEV_CHANGENAME)
1729 if (!dev->ieee80211_ptr || !dev->ieee80211_ptr->wiphy)
1732 if (dev->ieee80211_ptr->wiphy->privid != mac80211_wiphy_privid)
1735 sdata = IEEE80211_DEV_TO_SUB_IF(dev);
1737 memcpy(sdata->name, dev->name, IFNAMSIZ);
1739 ieee80211_debugfs_rename_netdev(sdata);
1743 static struct notifier_block mac80211_netdev_notifier = {
1744 .notifier_call = netdev_notify,
1747 int ieee80211_iface_init(void)
1749 return register_netdevice_notifier(&mac80211_netdev_notifier);
1752 void ieee80211_iface_exit(void)
1754 unregister_netdevice_notifier(&mac80211_netdev_notifier);