2 * Copyright 2002-2005, Instant802 Networks, Inc.
3 * Copyright 2005-2006, Devicescape Software, Inc.
5 * Copyright 2013-2014 Intel Mobile Communications GmbH
7 * This program is free software; you can redistribute it and/or modify
8 * it under the terms of the GNU General Public License version 2 as
9 * published by the Free Software Foundation.
12 #include <net/mac80211.h>
13 #include <linux/module.h>
14 #include <linux/init.h>
15 #include <linux/netdevice.h>
16 #include <linux/types.h>
17 #include <linux/slab.h>
18 #include <linux/skbuff.h>
19 #include <linux/etherdevice.h>
20 #include <linux/if_arp.h>
21 #include <linux/rtnetlink.h>
22 #include <linux/bitmap.h>
23 #include <linux/inetdevice.h>
24 #include <net/net_namespace.h>
25 #include <net/cfg80211.h>
26 #include <net/addrconf.h>
28 #include "ieee80211_i.h"
29 #include "driver-ops.h"
36 void ieee80211_configure_filter(struct ieee80211_local *local)
39 unsigned int changed_flags;
40 unsigned int new_flags = 0;
42 if (atomic_read(&local->iff_allmultis))
43 new_flags |= FIF_ALLMULTI;
45 if (local->monitors || test_bit(SCAN_SW_SCANNING, &local->scanning) ||
46 test_bit(SCAN_ONCHANNEL_SCANNING, &local->scanning))
47 new_flags |= FIF_BCN_PRBRESP_PROMISC;
49 if (local->fif_probe_req || local->probe_req_reg)
50 new_flags |= FIF_PROBE_REQ;
52 if (local->fif_fcsfail)
53 new_flags |= FIF_FCSFAIL;
55 if (local->fif_plcpfail)
56 new_flags |= FIF_PLCPFAIL;
58 if (local->fif_control)
59 new_flags |= FIF_CONTROL;
61 if (local->fif_other_bss)
62 new_flags |= FIF_OTHER_BSS;
64 if (local->fif_pspoll)
65 new_flags |= FIF_PSPOLL;
67 spin_lock_bh(&local->filter_lock);
68 changed_flags = local->filter_flags ^ new_flags;
70 mc = drv_prepare_multicast(local, &local->mc_list);
71 spin_unlock_bh(&local->filter_lock);
76 drv_configure_filter(local, changed_flags, &new_flags, mc);
78 WARN_ON(new_flags & (1<<31));
80 local->filter_flags = new_flags & ~(1<<31);
83 static void ieee80211_reconfig_filter(struct work_struct *work)
85 struct ieee80211_local *local =
86 container_of(work, struct ieee80211_local, reconfig_filter);
88 ieee80211_configure_filter(local);
91 static u32 ieee80211_hw_conf_chan(struct ieee80211_local *local)
93 struct ieee80211_sub_if_data *sdata;
94 struct cfg80211_chan_def chandef = {};
99 offchannel_flag = local->hw.conf.flags & IEEE80211_CONF_OFFCHANNEL;
101 if (local->scan_chandef.chan) {
102 chandef = local->scan_chandef;
103 } else if (local->tmp_channel) {
104 chandef.chan = local->tmp_channel;
105 chandef.width = NL80211_CHAN_WIDTH_20_NOHT;
106 chandef.center_freq1 = chandef.chan->center_freq;
108 chandef = local->_oper_chandef;
110 WARN(!cfg80211_chandef_valid(&chandef),
111 "control:%d MHz width:%d center: %d/%d MHz",
112 chandef.chan->center_freq, chandef.width,
113 chandef.center_freq1, chandef.center_freq2);
115 if (!cfg80211_chandef_identical(&chandef, &local->_oper_chandef))
116 local->hw.conf.flags |= IEEE80211_CONF_OFFCHANNEL;
118 local->hw.conf.flags &= ~IEEE80211_CONF_OFFCHANNEL;
120 offchannel_flag ^= local->hw.conf.flags & IEEE80211_CONF_OFFCHANNEL;
122 if (offchannel_flag ||
123 !cfg80211_chandef_identical(&local->hw.conf.chandef,
124 &local->_oper_chandef)) {
125 local->hw.conf.chandef = chandef;
126 changed |= IEEE80211_CONF_CHANGE_CHANNEL;
129 if (!conf_is_ht(&local->hw.conf)) {
131 * mac80211.h documents that this is only valid
132 * when the channel is set to an HT type, and
133 * that otherwise STATIC is used.
135 local->hw.conf.smps_mode = IEEE80211_SMPS_STATIC;
136 } else if (local->hw.conf.smps_mode != local->smps_mode) {
137 local->hw.conf.smps_mode = local->smps_mode;
138 changed |= IEEE80211_CONF_CHANGE_SMPS;
141 power = ieee80211_chandef_max_power(&chandef);
144 list_for_each_entry_rcu(sdata, &local->interfaces, list) {
145 if (!rcu_access_pointer(sdata->vif.chanctx_conf))
147 if (sdata->vif.type == NL80211_IFTYPE_AP_VLAN)
149 power = min(power, sdata->vif.bss_conf.txpower);
153 if (local->hw.conf.power_level != power) {
154 changed |= IEEE80211_CONF_CHANGE_POWER;
155 local->hw.conf.power_level = power;
161 int ieee80211_hw_config(struct ieee80211_local *local, u32 changed)
167 if (!local->use_chanctx)
168 changed |= ieee80211_hw_conf_chan(local);
170 changed &= ~(IEEE80211_CONF_CHANGE_CHANNEL |
171 IEEE80211_CONF_CHANGE_POWER);
173 if (changed && local->open_count) {
174 ret = drv_config(local, changed);
177 * HW reconfiguration should never fail, the driver has told
178 * us what it can support so it should live up to that promise.
181 * rfkill is not integrated with mac80211 and a
182 * configuration command can thus fail if hardware rfkill
185 * FIXME: integrate rfkill with mac80211 and then add this
195 void ieee80211_bss_info_change_notify(struct ieee80211_sub_if_data *sdata,
198 struct ieee80211_local *local = sdata->local;
200 if (!changed || sdata->vif.type == NL80211_IFTYPE_AP_VLAN)
203 drv_bss_info_changed(local, sdata, &sdata->vif.bss_conf, changed);
206 u32 ieee80211_reset_erp_info(struct ieee80211_sub_if_data *sdata)
208 sdata->vif.bss_conf.use_cts_prot = false;
209 sdata->vif.bss_conf.use_short_preamble = false;
210 sdata->vif.bss_conf.use_short_slot = false;
211 return BSS_CHANGED_ERP_CTS_PROT |
212 BSS_CHANGED_ERP_PREAMBLE |
213 BSS_CHANGED_ERP_SLOT;
216 static void ieee80211_tasklet_handler(unsigned long data)
218 struct ieee80211_local *local = (struct ieee80211_local *) data;
221 while ((skb = skb_dequeue(&local->skb_queue)) ||
222 (skb = skb_dequeue(&local->skb_queue_unreliable))) {
223 switch (skb->pkt_type) {
224 case IEEE80211_RX_MSG:
225 /* Clear skb->pkt_type in order to not confuse kernel
228 ieee80211_rx(&local->hw, skb);
230 case IEEE80211_TX_STATUS_MSG:
232 ieee80211_tx_status(&local->hw, skb);
235 WARN(1, "mac80211: Packet is of unknown type %d\n",
243 static void ieee80211_restart_work(struct work_struct *work)
245 struct ieee80211_local *local =
246 container_of(work, struct ieee80211_local, restart_work);
247 struct ieee80211_sub_if_data *sdata;
249 /* wait for scan work complete */
250 flush_workqueue(local->workqueue);
251 flush_work(&local->sched_scan_stopped_work);
253 WARN(test_bit(SCAN_HW_SCANNING, &local->scanning),
254 "%s called with hardware scan in progress\n", __func__);
257 list_for_each_entry(sdata, &local->interfaces, list)
258 flush_delayed_work(&sdata->dec_tailroom_needed_wk);
259 ieee80211_scan_cancel(local);
261 /* make sure any new ROC will consider local->in_reconfig */
262 flush_delayed_work(&local->roc_work);
263 flush_work(&local->hw_roc_done);
265 ieee80211_reconfig(local);
269 void ieee80211_restart_hw(struct ieee80211_hw *hw)
271 struct ieee80211_local *local = hw_to_local(hw);
273 trace_api_restart_hw(local);
275 wiphy_info(hw->wiphy,
276 "Hardware restart was requested\n");
278 /* use this reason, ieee80211_reconfig will unblock it */
279 ieee80211_stop_queues_by_reason(hw, IEEE80211_MAX_QUEUE_MAP,
280 IEEE80211_QUEUE_STOP_REASON_SUSPEND,
284 * Stop all Rx during the reconfig. We don't want state changes
285 * or driver callbacks while this is in progress.
287 local->in_reconfig = true;
290 queue_work(system_freezable_wq, &local->restart_work);
292 EXPORT_SYMBOL(ieee80211_restart_hw);
295 static int ieee80211_ifa_changed(struct notifier_block *nb,
296 unsigned long data, void *arg)
298 struct in_ifaddr *ifa = arg;
299 struct ieee80211_local *local =
300 container_of(nb, struct ieee80211_local,
302 struct net_device *ndev = ifa->ifa_dev->dev;
303 struct wireless_dev *wdev = ndev->ieee80211_ptr;
304 struct in_device *idev;
305 struct ieee80211_sub_if_data *sdata;
306 struct ieee80211_bss_conf *bss_conf;
307 struct ieee80211_if_managed *ifmgd;
310 /* Make sure it's our interface that got changed */
314 if (wdev->wiphy != local->hw.wiphy)
317 sdata = IEEE80211_DEV_TO_SUB_IF(ndev);
318 bss_conf = &sdata->vif.bss_conf;
320 /* ARP filtering is only supported in managed mode */
321 if (sdata->vif.type != NL80211_IFTYPE_STATION)
324 idev = __in_dev_get_rtnl(sdata->dev);
328 ifmgd = &sdata->u.mgd;
331 /* Copy the addresses to the bss_conf list */
332 ifa = idev->ifa_list;
334 if (c < IEEE80211_BSS_ARP_ADDR_LIST_LEN)
335 bss_conf->arp_addr_list[c] = ifa->ifa_address;
340 bss_conf->arp_addr_cnt = c;
342 /* Configure driver only if associated (which also implies it is up) */
343 if (ifmgd->associated)
344 ieee80211_bss_info_change_notify(sdata,
345 BSS_CHANGED_ARP_FILTER);
353 #if IS_ENABLED(CONFIG_IPV6)
354 static int ieee80211_ifa6_changed(struct notifier_block *nb,
355 unsigned long data, void *arg)
357 struct inet6_ifaddr *ifa = (struct inet6_ifaddr *)arg;
358 struct inet6_dev *idev = ifa->idev;
359 struct net_device *ndev = ifa->idev->dev;
360 struct ieee80211_local *local =
361 container_of(nb, struct ieee80211_local, ifa6_notifier);
362 struct wireless_dev *wdev = ndev->ieee80211_ptr;
363 struct ieee80211_sub_if_data *sdata;
365 /* Make sure it's our interface that got changed */
366 if (!wdev || wdev->wiphy != local->hw.wiphy)
369 sdata = IEEE80211_DEV_TO_SUB_IF(ndev);
372 * For now only support station mode. This is mostly because
373 * doing AP would have to handle AP_VLAN in some way ...
375 if (sdata->vif.type != NL80211_IFTYPE_STATION)
378 drv_ipv6_addr_change(local, sdata, idev);
384 /* There isn't a lot of sense in it, but you can transmit anything you like */
385 static const struct ieee80211_txrx_stypes
386 ieee80211_default_mgmt_stypes[NUM_NL80211_IFTYPES] = {
387 [NL80211_IFTYPE_ADHOC] = {
389 .rx = BIT(IEEE80211_STYPE_ACTION >> 4) |
390 BIT(IEEE80211_STYPE_AUTH >> 4) |
391 BIT(IEEE80211_STYPE_DEAUTH >> 4) |
392 BIT(IEEE80211_STYPE_PROBE_REQ >> 4),
394 [NL80211_IFTYPE_STATION] = {
396 .rx = BIT(IEEE80211_STYPE_ACTION >> 4) |
397 BIT(IEEE80211_STYPE_PROBE_REQ >> 4),
399 [NL80211_IFTYPE_AP] = {
401 .rx = BIT(IEEE80211_STYPE_ASSOC_REQ >> 4) |
402 BIT(IEEE80211_STYPE_REASSOC_REQ >> 4) |
403 BIT(IEEE80211_STYPE_PROBE_REQ >> 4) |
404 BIT(IEEE80211_STYPE_DISASSOC >> 4) |
405 BIT(IEEE80211_STYPE_AUTH >> 4) |
406 BIT(IEEE80211_STYPE_DEAUTH >> 4) |
407 BIT(IEEE80211_STYPE_ACTION >> 4),
409 [NL80211_IFTYPE_AP_VLAN] = {
412 .rx = BIT(IEEE80211_STYPE_ASSOC_REQ >> 4) |
413 BIT(IEEE80211_STYPE_REASSOC_REQ >> 4) |
414 BIT(IEEE80211_STYPE_PROBE_REQ >> 4) |
415 BIT(IEEE80211_STYPE_DISASSOC >> 4) |
416 BIT(IEEE80211_STYPE_AUTH >> 4) |
417 BIT(IEEE80211_STYPE_DEAUTH >> 4) |
418 BIT(IEEE80211_STYPE_ACTION >> 4),
420 [NL80211_IFTYPE_P2P_CLIENT] = {
422 .rx = BIT(IEEE80211_STYPE_ACTION >> 4) |
423 BIT(IEEE80211_STYPE_PROBE_REQ >> 4),
425 [NL80211_IFTYPE_P2P_GO] = {
427 .rx = BIT(IEEE80211_STYPE_ASSOC_REQ >> 4) |
428 BIT(IEEE80211_STYPE_REASSOC_REQ >> 4) |
429 BIT(IEEE80211_STYPE_PROBE_REQ >> 4) |
430 BIT(IEEE80211_STYPE_DISASSOC >> 4) |
431 BIT(IEEE80211_STYPE_AUTH >> 4) |
432 BIT(IEEE80211_STYPE_DEAUTH >> 4) |
433 BIT(IEEE80211_STYPE_ACTION >> 4),
435 [NL80211_IFTYPE_MESH_POINT] = {
437 .rx = BIT(IEEE80211_STYPE_ACTION >> 4) |
438 BIT(IEEE80211_STYPE_AUTH >> 4) |
439 BIT(IEEE80211_STYPE_DEAUTH >> 4),
441 [NL80211_IFTYPE_P2P_DEVICE] = {
443 .rx = BIT(IEEE80211_STYPE_ACTION >> 4) |
444 BIT(IEEE80211_STYPE_PROBE_REQ >> 4),
448 static const struct ieee80211_ht_cap mac80211_ht_capa_mod_mask = {
449 .ampdu_params_info = IEEE80211_HT_AMPDU_PARM_FACTOR |
450 IEEE80211_HT_AMPDU_PARM_DENSITY,
452 .cap_info = cpu_to_le16(IEEE80211_HT_CAP_SUP_WIDTH_20_40 |
453 IEEE80211_HT_CAP_MAX_AMSDU |
454 IEEE80211_HT_CAP_SGI_20 |
455 IEEE80211_HT_CAP_SGI_40 |
456 IEEE80211_HT_CAP_LDPC_CODING |
457 IEEE80211_HT_CAP_40MHZ_INTOLERANT),
459 .rx_mask = { 0xff, 0xff, 0xff, 0xff, 0xff,
460 0xff, 0xff, 0xff, 0xff, 0xff, },
464 static const struct ieee80211_vht_cap mac80211_vht_capa_mod_mask = {
466 cpu_to_le32(IEEE80211_VHT_CAP_RXLDPC |
467 IEEE80211_VHT_CAP_SHORT_GI_80 |
468 IEEE80211_VHT_CAP_SHORT_GI_160 |
469 IEEE80211_VHT_CAP_RXSTBC_1 |
470 IEEE80211_VHT_CAP_RXSTBC_2 |
471 IEEE80211_VHT_CAP_RXSTBC_3 |
472 IEEE80211_VHT_CAP_RXSTBC_4 |
473 IEEE80211_VHT_CAP_TXSTBC |
474 IEEE80211_VHT_CAP_SU_BEAMFORMER_CAPABLE |
475 IEEE80211_VHT_CAP_SU_BEAMFORMEE_CAPABLE |
476 IEEE80211_VHT_CAP_TX_ANTENNA_PATTERN |
477 IEEE80211_VHT_CAP_RX_ANTENNA_PATTERN |
478 IEEE80211_VHT_CAP_MAX_A_MPDU_LENGTH_EXPONENT_MASK),
480 .rx_mcs_map = cpu_to_le16(~0),
481 .tx_mcs_map = cpu_to_le16(~0),
485 struct ieee80211_hw *ieee80211_alloc_hw_nm(size_t priv_data_len,
486 const struct ieee80211_ops *ops,
487 const char *requested_name)
489 struct ieee80211_local *local;
494 if (WARN_ON(!ops->tx || !ops->start || !ops->stop || !ops->config ||
495 !ops->add_interface || !ops->remove_interface ||
496 !ops->configure_filter))
499 if (WARN_ON(ops->sta_state && (ops->sta_add || ops->sta_remove)))
502 /* check all or no channel context operations exist */
503 i = !!ops->add_chanctx + !!ops->remove_chanctx +
504 !!ops->change_chanctx + !!ops->assign_vif_chanctx +
505 !!ops->unassign_vif_chanctx;
506 if (WARN_ON(i != 0 && i != 5))
508 use_chanctx = i == 5;
510 /* Ensure 32-byte alignment of our private data and hw private data.
511 * We use the wiphy priv data for both our ieee80211_local and for
512 * the driver's private data
514 * In memory it'll be like this:
516 * +-------------------------+
518 * +-------------------------+
519 * | struct ieee80211_local |
520 * +-------------------------+
521 * | driver's private data |
522 * +-------------------------+
525 priv_size = ALIGN(sizeof(*local), NETDEV_ALIGN) + priv_data_len;
527 wiphy = wiphy_new_nm(&mac80211_config_ops, priv_size, requested_name);
532 wiphy->mgmt_stypes = ieee80211_default_mgmt_stypes;
534 wiphy->privid = mac80211_wiphy_privid;
536 wiphy->flags |= WIPHY_FLAG_NETNS_OK |
537 WIPHY_FLAG_4ADDR_AP |
538 WIPHY_FLAG_4ADDR_STATION |
539 WIPHY_FLAG_REPORTS_OBSS |
540 WIPHY_FLAG_OFFCHAN_TX;
542 if (ops->remain_on_channel)
543 wiphy->flags |= WIPHY_FLAG_HAS_REMAIN_ON_CHANNEL;
545 wiphy->features |= NL80211_FEATURE_SK_TX_STATUS |
546 NL80211_FEATURE_SAE |
547 NL80211_FEATURE_HT_IBSS |
548 NL80211_FEATURE_VIF_TXPOWER |
549 NL80211_FEATURE_MAC_ON_CREATE |
550 NL80211_FEATURE_USERSPACE_MPM |
551 NL80211_FEATURE_FULL_AP_CLIENT_STATE;
554 wiphy->features |= NL80211_FEATURE_LOW_PRIORITY_SCAN |
555 NL80211_FEATURE_AP_SCAN;
559 wiphy->flags |= WIPHY_FLAG_IBSS_RSN;
561 wiphy_ext_feature_set(wiphy, NL80211_EXT_FEATURE_RRM);
563 wiphy->bss_priv_size = sizeof(struct ieee80211_bss);
565 local = wiphy_priv(wiphy);
567 if (sta_info_init(local))
570 local->hw.wiphy = wiphy;
572 local->hw.priv = (char *)local + ALIGN(sizeof(*local), NETDEV_ALIGN);
575 local->use_chanctx = use_chanctx;
577 /* set up some defaults */
578 local->hw.queues = 1;
579 local->hw.max_rates = 1;
580 local->hw.max_report_rates = 0;
581 local->hw.max_rx_aggregation_subframes = IEEE80211_MAX_AMPDU_BUF;
582 local->hw.max_tx_aggregation_subframes = IEEE80211_MAX_AMPDU_BUF;
583 local->hw.offchannel_tx_hw_queue = IEEE80211_INVAL_HW_QUEUE;
584 local->hw.conf.long_frame_max_tx_count = wiphy->retry_long;
585 local->hw.conf.short_frame_max_tx_count = wiphy->retry_short;
586 local->hw.radiotap_mcs_details = IEEE80211_RADIOTAP_MCS_HAVE_MCS |
587 IEEE80211_RADIOTAP_MCS_HAVE_GI |
588 IEEE80211_RADIOTAP_MCS_HAVE_BW;
589 local->hw.radiotap_vht_details = IEEE80211_RADIOTAP_VHT_KNOWN_GI |
590 IEEE80211_RADIOTAP_VHT_KNOWN_BANDWIDTH;
591 local->hw.uapsd_queues = IEEE80211_DEFAULT_UAPSD_QUEUES;
592 local->hw.uapsd_max_sp_len = IEEE80211_DEFAULT_MAX_SP_LEN;
593 local->user_power_level = IEEE80211_UNSET_POWER_LEVEL;
594 wiphy->ht_capa_mod_mask = &mac80211_ht_capa_mod_mask;
595 wiphy->vht_capa_mod_mask = &mac80211_vht_capa_mod_mask;
597 local->ext_capa[7] = WLAN_EXT_CAPA8_OPMODE_NOTIF;
599 wiphy->extended_capabilities = local->ext_capa;
600 wiphy->extended_capabilities_mask = local->ext_capa;
601 wiphy->extended_capabilities_len =
602 ARRAY_SIZE(local->ext_capa);
604 INIT_LIST_HEAD(&local->interfaces);
606 __hw_addr_init(&local->mc_list);
608 mutex_init(&local->iflist_mtx);
609 mutex_init(&local->mtx);
611 mutex_init(&local->key_mtx);
612 spin_lock_init(&local->filter_lock);
613 spin_lock_init(&local->rx_path_lock);
614 spin_lock_init(&local->queue_stop_reason_lock);
616 INIT_LIST_HEAD(&local->chanctx_list);
617 mutex_init(&local->chanctx_mtx);
619 INIT_DELAYED_WORK(&local->scan_work, ieee80211_scan_work);
621 INIT_WORK(&local->restart_work, ieee80211_restart_work);
623 INIT_WORK(&local->radar_detected_work,
624 ieee80211_dfs_radar_detected_work);
626 INIT_WORK(&local->reconfig_filter, ieee80211_reconfig_filter);
627 local->smps_mode = IEEE80211_SMPS_OFF;
629 INIT_WORK(&local->dynamic_ps_enable_work,
630 ieee80211_dynamic_ps_enable_work);
631 INIT_WORK(&local->dynamic_ps_disable_work,
632 ieee80211_dynamic_ps_disable_work);
633 setup_timer(&local->dynamic_ps_timer,
634 ieee80211_dynamic_ps_timer, (unsigned long) local);
636 INIT_WORK(&local->sched_scan_stopped_work,
637 ieee80211_sched_scan_stopped_work);
639 INIT_WORK(&local->tdls_chsw_work, ieee80211_tdls_chsw_work);
641 spin_lock_init(&local->ack_status_lock);
642 idr_init(&local->ack_status_frames);
644 for (i = 0; i < IEEE80211_MAX_QUEUES; i++) {
645 skb_queue_head_init(&local->pending[i]);
646 atomic_set(&local->agg_queue_stop[i], 0);
648 tasklet_init(&local->tx_pending_tasklet, ieee80211_tx_pending,
649 (unsigned long)local);
651 tasklet_init(&local->tasklet,
652 ieee80211_tasklet_handler,
653 (unsigned long) local);
655 skb_queue_head_init(&local->skb_queue);
656 skb_queue_head_init(&local->skb_queue_unreliable);
657 skb_queue_head_init(&local->skb_queue_tdls_chsw);
659 ieee80211_alloc_led_names(local);
661 ieee80211_roc_setup(local);
668 EXPORT_SYMBOL(ieee80211_alloc_hw_nm);
670 static int ieee80211_init_cipher_suites(struct ieee80211_local *local)
672 bool have_wep = !(IS_ERR(local->wep_tx_tfm) ||
673 IS_ERR(local->wep_rx_tfm));
674 bool have_mfp = ieee80211_hw_check(&local->hw, MFP_CAPABLE);
675 int n_suites = 0, r = 0, w = 0;
677 static const u32 cipher_suites[] = {
678 /* keep WEP first, it may be removed below */
679 WLAN_CIPHER_SUITE_WEP40,
680 WLAN_CIPHER_SUITE_WEP104,
681 WLAN_CIPHER_SUITE_TKIP,
682 WLAN_CIPHER_SUITE_CCMP,
683 WLAN_CIPHER_SUITE_CCMP_256,
684 WLAN_CIPHER_SUITE_GCMP,
685 WLAN_CIPHER_SUITE_GCMP_256,
687 /* keep last -- depends on hw flags! */
688 WLAN_CIPHER_SUITE_AES_CMAC,
689 WLAN_CIPHER_SUITE_BIP_CMAC_256,
690 WLAN_CIPHER_SUITE_BIP_GMAC_128,
691 WLAN_CIPHER_SUITE_BIP_GMAC_256,
694 if (ieee80211_hw_check(&local->hw, SW_CRYPTO_CONTROL) ||
695 local->hw.wiphy->cipher_suites) {
696 /* If the driver advertises, or doesn't support SW crypto,
697 * we only need to remove WEP if necessary.
702 /* well if it has _no_ ciphers ... fine */
703 if (!local->hw.wiphy->n_cipher_suites)
706 /* Driver provides cipher suites, but we need to exclude WEP */
707 suites = kmemdup(local->hw.wiphy->cipher_suites,
708 sizeof(u32) * local->hw.wiphy->n_cipher_suites,
713 for (r = 0; r < local->hw.wiphy->n_cipher_suites; r++) {
714 u32 suite = local->hw.wiphy->cipher_suites[r];
716 if (suite == WLAN_CIPHER_SUITE_WEP40 ||
717 suite == WLAN_CIPHER_SUITE_WEP104)
721 } else if (!local->hw.cipher_schemes) {
722 /* If the driver doesn't have cipher schemes, there's nothing
723 * else to do other than assign the (software supported and
724 * perhaps offloaded) cipher suites.
726 local->hw.wiphy->cipher_suites = cipher_suites;
727 local->hw.wiphy->n_cipher_suites = ARRAY_SIZE(cipher_suites);
730 local->hw.wiphy->n_cipher_suites -= 4;
733 local->hw.wiphy->cipher_suites += 2;
734 local->hw.wiphy->n_cipher_suites -= 2;
737 /* not dynamically allocated, so just return */
740 const struct ieee80211_cipher_scheme *cs;
742 cs = local->hw.cipher_schemes;
744 /* Driver specifies cipher schemes only (but not cipher suites
745 * including the schemes)
747 * We start counting ciphers defined by schemes, TKIP, CCMP,
748 * CCMP-256, GCMP, and GCMP-256
750 n_suites = local->hw.n_cipher_schemes + 5;
752 /* check if we have WEP40 and WEP104 */
756 /* check if we have AES_CMAC, BIP-CMAC-256, BIP-GMAC-128,
762 suites = kmalloc(sizeof(u32) * n_suites, GFP_KERNEL);
766 suites[w++] = WLAN_CIPHER_SUITE_CCMP;
767 suites[w++] = WLAN_CIPHER_SUITE_CCMP_256;
768 suites[w++] = WLAN_CIPHER_SUITE_TKIP;
769 suites[w++] = WLAN_CIPHER_SUITE_GCMP;
770 suites[w++] = WLAN_CIPHER_SUITE_GCMP_256;
773 suites[w++] = WLAN_CIPHER_SUITE_WEP40;
774 suites[w++] = WLAN_CIPHER_SUITE_WEP104;
778 suites[w++] = WLAN_CIPHER_SUITE_AES_CMAC;
779 suites[w++] = WLAN_CIPHER_SUITE_BIP_CMAC_256;
780 suites[w++] = WLAN_CIPHER_SUITE_BIP_GMAC_128;
781 suites[w++] = WLAN_CIPHER_SUITE_BIP_GMAC_256;
784 for (r = 0; r < local->hw.n_cipher_schemes; r++) {
785 suites[w++] = cs[r].cipher;
786 if (WARN_ON(cs[r].pn_len > IEEE80211_MAX_PN_LEN)) {
793 local->hw.wiphy->cipher_suites = suites;
794 local->hw.wiphy->n_cipher_suites = w;
795 local->wiphy_ciphers_allocated = true;
800 int ieee80211_register_hw(struct ieee80211_hw *hw)
802 struct ieee80211_local *local = hw_to_local(hw);
804 enum nl80211_band band;
805 int channels, max_bitrates;
806 bool supp_ht, supp_vht;
807 netdev_features_t feature_whitelist;
808 struct cfg80211_chan_def dflt_chandef = {};
810 if (ieee80211_hw_check(hw, QUEUE_CONTROL) &&
811 (local->hw.offchannel_tx_hw_queue == IEEE80211_INVAL_HW_QUEUE ||
812 local->hw.offchannel_tx_hw_queue >= local->hw.queues))
815 if ((hw->wiphy->features & NL80211_FEATURE_TDLS_CHANNEL_SWITCH) &&
816 (!local->ops->tdls_channel_switch ||
817 !local->ops->tdls_cancel_channel_switch ||
818 !local->ops->tdls_recv_channel_switch))
822 if (hw->wiphy->wowlan && (!local->ops->suspend || !local->ops->resume))
826 if (!local->use_chanctx) {
827 for (i = 0; i < local->hw.wiphy->n_iface_combinations; i++) {
828 const struct ieee80211_iface_combination *comb;
830 comb = &local->hw.wiphy->iface_combinations[i];
832 if (comb->num_different_channels > 1)
837 * WDS is currently prohibited when channel contexts are used
838 * because there's no clear definition of which channel WDS
839 * type interfaces use
841 if (local->hw.wiphy->interface_modes & BIT(NL80211_IFTYPE_WDS))
844 /* DFS is not supported with multi-channel combinations yet */
845 for (i = 0; i < local->hw.wiphy->n_iface_combinations; i++) {
846 const struct ieee80211_iface_combination *comb;
848 comb = &local->hw.wiphy->iface_combinations[i];
850 if (comb->radar_detect_widths &&
851 comb->num_different_channels > 1)
856 /* Only HW csum features are currently compatible with mac80211 */
857 feature_whitelist = NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM |
858 NETIF_F_HW_CSUM | NETIF_F_SG | NETIF_F_HIGHDMA |
859 NETIF_F_GSO_SOFTWARE | NETIF_F_RXCSUM;
860 if (WARN_ON(hw->netdev_features & ~feature_whitelist))
863 if (hw->max_report_rates == 0)
864 hw->max_report_rates = hw->max_rates;
866 local->rx_chains = 1;
869 * generic code guarantees at least one band,
870 * set this very early because much code assumes
871 * that hw.conf.channel is assigned
877 for (band = 0; band < NUM_NL80211_BANDS; band++) {
878 struct ieee80211_supported_band *sband;
880 sband = local->hw.wiphy->bands[band];
884 if (!dflt_chandef.chan) {
885 cfg80211_chandef_create(&dflt_chandef,
888 /* init channel we're on */
889 if (!local->use_chanctx && !local->_oper_chandef.chan) {
890 local->hw.conf.chandef = dflt_chandef;
891 local->_oper_chandef = dflt_chandef;
893 local->monitor_chandef = dflt_chandef;
896 channels += sband->n_channels;
898 if (max_bitrates < sband->n_bitrates)
899 max_bitrates = sband->n_bitrates;
900 supp_ht = supp_ht || sband->ht_cap.ht_supported;
901 supp_vht = supp_vht || sband->vht_cap.vht_supported;
903 if (sband->ht_cap.ht_supported)
905 max(ieee80211_mcs_to_chains(&sband->ht_cap.mcs),
908 /* TODO: consider VHT for RX chains, hopefully it's the same */
911 /* if low-level driver supports AP, we also support VLAN */
912 if (local->hw.wiphy->interface_modes & BIT(NL80211_IFTYPE_AP)) {
913 hw->wiphy->interface_modes |= BIT(NL80211_IFTYPE_AP_VLAN);
914 hw->wiphy->software_iftypes |= BIT(NL80211_IFTYPE_AP_VLAN);
917 /* mac80211 always supports monitor */
918 hw->wiphy->interface_modes |= BIT(NL80211_IFTYPE_MONITOR);
919 hw->wiphy->software_iftypes |= BIT(NL80211_IFTYPE_MONITOR);
921 /* mac80211 doesn't support more than one IBSS interface right now */
922 for (i = 0; i < hw->wiphy->n_iface_combinations; i++) {
923 const struct ieee80211_iface_combination *c;
926 c = &hw->wiphy->iface_combinations[i];
928 for (j = 0; j < c->n_limits; j++)
929 if ((c->limits[j].types & BIT(NL80211_IFTYPE_ADHOC)) &&
930 c->limits[j].max > 1)
934 local->int_scan_req = kzalloc(sizeof(*local->int_scan_req) +
935 sizeof(void *) * channels, GFP_KERNEL);
936 if (!local->int_scan_req)
939 for (band = 0; band < NUM_NL80211_BANDS; band++) {
940 if (!local->hw.wiphy->bands[band])
942 local->int_scan_req->rates[band] = (u32) -1;
945 #ifndef CONFIG_MAC80211_MESH
946 /* mesh depends on Kconfig, but drivers should set it if they want */
947 local->hw.wiphy->interface_modes &= ~BIT(NL80211_IFTYPE_MESH_POINT);
950 /* if the underlying driver supports mesh, mac80211 will (at least)
951 * provide routing of mesh authentication frames to userspace */
952 if (local->hw.wiphy->interface_modes & BIT(NL80211_IFTYPE_MESH_POINT))
953 local->hw.wiphy->flags |= WIPHY_FLAG_MESH_AUTH;
955 /* mac80211 supports control port protocol changing */
956 local->hw.wiphy->flags |= WIPHY_FLAG_CONTROL_PORT_PROTOCOL;
958 if (ieee80211_hw_check(&local->hw, SIGNAL_DBM)) {
959 local->hw.wiphy->signal_type = CFG80211_SIGNAL_TYPE_MBM;
960 } else if (ieee80211_hw_check(&local->hw, SIGNAL_UNSPEC)) {
961 local->hw.wiphy->signal_type = CFG80211_SIGNAL_TYPE_UNSPEC;
962 if (hw->max_signal <= 0) {
964 goto fail_wiphy_register;
969 * Calculate scan IE length -- we need this to alloc
970 * memory and to subtract from the driver limit. It
971 * includes the DS Params, (extended) supported rates, and HT
972 * information -- SSID is the driver's responsibility.
974 local->scan_ies_len = 4 + max_bitrates /* (ext) supp rates */ +
977 local->scan_ies_len += 2 + sizeof(struct ieee80211_ht_cap);
980 local->scan_ies_len +=
981 2 + sizeof(struct ieee80211_vht_cap);
983 if (!local->ops->hw_scan) {
984 /* For hw_scan, driver needs to set these up. */
985 local->hw.wiphy->max_scan_ssids = 4;
986 local->hw.wiphy->max_scan_ie_len = IEEE80211_MAX_DATA_LEN;
990 * If the driver supports any scan IEs, then assume the
991 * limit includes the IEs mac80211 will add, otherwise
992 * leave it at zero and let the driver sort it out; we
993 * still pass our IEs to the driver but userspace will
994 * not be allowed to in that case.
996 if (local->hw.wiphy->max_scan_ie_len)
997 local->hw.wiphy->max_scan_ie_len -= local->scan_ies_len;
999 WARN_ON(!ieee80211_cs_list_valid(local->hw.cipher_schemes,
1000 local->hw.n_cipher_schemes));
1002 result = ieee80211_init_cipher_suites(local);
1004 goto fail_wiphy_register;
1006 if (!local->ops->remain_on_channel)
1007 local->hw.wiphy->max_remain_on_channel_duration = 5000;
1009 /* mac80211 based drivers don't support internal TDLS setup */
1010 if (local->hw.wiphy->flags & WIPHY_FLAG_SUPPORTS_TDLS)
1011 local->hw.wiphy->flags |= WIPHY_FLAG_TDLS_EXTERNAL_SETUP;
1013 /* mac80211 supports eCSA, if the driver supports STA CSA at all */
1014 if (ieee80211_hw_check(&local->hw, CHANCTX_STA_CSA))
1015 local->ext_capa[0] |= WLAN_EXT_CAPA1_EXT_CHANNEL_SWITCHING;
1017 local->hw.wiphy->max_num_csa_counters = IEEE80211_MAX_CSA_COUNTERS_NUM;
1019 result = wiphy_register(local->hw.wiphy);
1021 goto fail_wiphy_register;
1024 * We use the number of queues for feature tests (QoS, HT) internally
1025 * so restrict them appropriately.
1027 if (hw->queues > IEEE80211_MAX_QUEUES)
1028 hw->queues = IEEE80211_MAX_QUEUES;
1031 alloc_ordered_workqueue("%s", 0, wiphy_name(local->hw.wiphy));
1032 if (!local->workqueue) {
1034 goto fail_workqueue;
1038 * The hardware needs headroom for sending the frame,
1039 * and we need some headroom for passing the frame to monitor
1040 * interfaces, but never both at the same time.
1042 local->tx_headroom = max_t(unsigned int , local->hw.extra_tx_headroom,
1043 IEEE80211_TX_STATUS_HEADROOM);
1045 debugfs_hw_add(local);
1048 * if the driver doesn't specify a max listen interval we
1049 * use 5 which should be a safe default
1051 if (local->hw.max_listen_interval == 0)
1052 local->hw.max_listen_interval = 5;
1054 local->hw.conf.listen_interval = local->hw.max_listen_interval;
1056 local->dynamic_ps_forced_timeout = -1;
1058 result = ieee80211_wep_init(local);
1060 wiphy_debug(local->hw.wiphy, "Failed to initialize wep: %d\n",
1063 local->hw.conf.flags = IEEE80211_CONF_IDLE;
1065 ieee80211_led_init(local);
1069 result = ieee80211_init_rate_ctrl_alg(local,
1070 hw->rate_control_algorithm);
1072 wiphy_debug(local->hw.wiphy,
1073 "Failed to initialize rate control algorithm\n");
1077 /* add one default STA interface if supported */
1078 if (local->hw.wiphy->interface_modes & BIT(NL80211_IFTYPE_STATION) &&
1079 !ieee80211_hw_check(hw, NO_AUTO_VIF)) {
1080 result = ieee80211_if_add(local, "wlan%d", NET_NAME_ENUM, NULL,
1081 NL80211_IFTYPE_STATION, NULL);
1083 wiphy_warn(local->hw.wiphy,
1084 "Failed to add default virtual iface\n");
1089 result = ieee80211_txq_setup_flows(local);
1094 local->ifa_notifier.notifier_call = ieee80211_ifa_changed;
1095 result = register_inetaddr_notifier(&local->ifa_notifier);
1100 #if IS_ENABLED(CONFIG_IPV6)
1101 local->ifa6_notifier.notifier_call = ieee80211_ifa6_changed;
1102 result = register_inet6addr_notifier(&local->ifa6_notifier);
1109 #if IS_ENABLED(CONFIG_IPV6)
1112 unregister_inetaddr_notifier(&local->ifa_notifier);
1115 #if defined(CONFIG_INET) || defined(CONFIG_IPV6)
1118 ieee80211_txq_teardown_flows(local);
1121 rate_control_deinitialize(local);
1122 ieee80211_remove_interfaces(local);
1125 ieee80211_led_exit(local);
1126 ieee80211_wep_free(local);
1127 destroy_workqueue(local->workqueue);
1129 wiphy_unregister(local->hw.wiphy);
1130 fail_wiphy_register:
1131 if (local->wiphy_ciphers_allocated)
1132 kfree(local->hw.wiphy->cipher_suites);
1133 kfree(local->int_scan_req);
1136 EXPORT_SYMBOL(ieee80211_register_hw);
1138 void ieee80211_unregister_hw(struct ieee80211_hw *hw)
1140 struct ieee80211_local *local = hw_to_local(hw);
1142 tasklet_kill(&local->tx_pending_tasklet);
1143 tasklet_kill(&local->tasklet);
1146 unregister_inetaddr_notifier(&local->ifa_notifier);
1148 #if IS_ENABLED(CONFIG_IPV6)
1149 unregister_inet6addr_notifier(&local->ifa6_notifier);
1155 * At this point, interface list manipulations are fine
1156 * because the driver cannot be handing us frames any
1157 * more and the tasklet is killed.
1159 ieee80211_remove_interfaces(local);
1163 cancel_delayed_work_sync(&local->roc_work);
1164 cancel_work_sync(&local->restart_work);
1165 cancel_work_sync(&local->reconfig_filter);
1166 cancel_work_sync(&local->tdls_chsw_work);
1167 flush_work(&local->sched_scan_stopped_work);
1169 ieee80211_clear_tx_pending(local);
1170 rate_control_deinitialize(local);
1172 if (skb_queue_len(&local->skb_queue) ||
1173 skb_queue_len(&local->skb_queue_unreliable))
1174 wiphy_warn(local->hw.wiphy, "skb_queue not empty\n");
1175 skb_queue_purge(&local->skb_queue);
1176 skb_queue_purge(&local->skb_queue_unreliable);
1177 skb_queue_purge(&local->skb_queue_tdls_chsw);
1178 ieee80211_txq_teardown_flows(local);
1180 destroy_workqueue(local->workqueue);
1181 wiphy_unregister(local->hw.wiphy);
1182 ieee80211_wep_free(local);
1183 ieee80211_led_exit(local);
1184 kfree(local->int_scan_req);
1186 EXPORT_SYMBOL(ieee80211_unregister_hw);
1188 static int ieee80211_free_ack_frame(int id, void *p, void *data)
1190 WARN_ONCE(1, "Have pending ack frames!\n");
1195 void ieee80211_free_hw(struct ieee80211_hw *hw)
1197 struct ieee80211_local *local = hw_to_local(hw);
1199 mutex_destroy(&local->iflist_mtx);
1200 mutex_destroy(&local->mtx);
1202 if (local->wiphy_ciphers_allocated)
1203 kfree(local->hw.wiphy->cipher_suites);
1205 idr_for_each(&local->ack_status_frames,
1206 ieee80211_free_ack_frame, NULL);
1207 idr_destroy(&local->ack_status_frames);
1209 sta_info_stop(local);
1211 ieee80211_free_led_names(local);
1213 wiphy_free(local->hw.wiphy);
1215 EXPORT_SYMBOL(ieee80211_free_hw);
1217 static int __init ieee80211_init(void)
1219 struct sk_buff *skb;
1222 BUILD_BUG_ON(sizeof(struct ieee80211_tx_info) > sizeof(skb->cb));
1223 BUILD_BUG_ON(offsetof(struct ieee80211_tx_info, driver_data) +
1224 IEEE80211_TX_INFO_DRIVER_DATA_SIZE > sizeof(skb->cb));
1226 ret = rc80211_minstrel_init();
1230 ret = rc80211_minstrel_ht_init();
1234 ret = ieee80211_iface_init();
1240 rc80211_minstrel_ht_exit();
1242 rc80211_minstrel_exit();
1247 static void __exit ieee80211_exit(void)
1249 rc80211_minstrel_ht_exit();
1250 rc80211_minstrel_exit();
1254 ieee80211_iface_exit();
1260 subsys_initcall(ieee80211_init);
1261 module_exit(ieee80211_exit);
1263 MODULE_DESCRIPTION("IEEE 802.11 subsystem");
1264 MODULE_LICENSE("GPL");