drivers/leds/leds-lp8860.c

   1 /*
   2  * TI LP8860 4-Channel LED Driver
   3  *
   4  * Copyright (C) 2014 Texas Instruments
   5  *
   6  * Author: Dan Murphy <[email protected]>
   7  *
   8  * This program is free software; you can redistribute it and/or
   9  * modify it under the terms of the GNU General Public License
  10  * version 2 as published by the Free Software Foundation.
  11  *
  12  */
  13
  14 #include <linux/i2c.h>
  15 #include <linux/init.h>
  16 #include <linux/leds.h>
  17 #include <linux/regmap.h>
  18 #include <linux/regulator/consumer.h>
  19 #include <linux/module.h>
  20 #include <linux/mutex.h>
  21 #include <linux/of.h>
  22 #include <linux/of_gpio.h>
  23 #include <linux/gpio/consumer.h>
  24 #include <linux/slab.h>
  25 #include <uapi/linux/uleds.h>
  26
  27 #define LP8860_DISP_CL1_BRT_MSB         0x00
  28 #define LP8860_DISP_CL1_BRT_LSB         0x01
  29 #define LP8860_DISP_CL1_CURR_MSB        0x02
  30 #define LP8860_DISP_CL1_CURR_LSB        0x03
  31 #define LP8860_CL2_BRT_MSB              0x04
  32 #define LP8860_CL2_BRT_LSB              0x05
  33 #define LP8860_CL2_CURRENT              0x06
  34 #define LP8860_CL3_BRT_MSB              0x07
  35 #define LP8860_CL3_BRT_LSB              0x08
  36 #define LP8860_CL3_CURRENT              0x09
  37 #define LP8860_CL4_BRT_MSB              0x0a
  38 #define LP8860_CL4_BRT_LSB              0x0b
  39 #define LP8860_CL4_CURRENT              0x0c
  40 #define LP8860_CONFIG                   0x0d
  41 #define LP8860_STATUS                   0x0e
  42 #define LP8860_FAULT                    0x0f
  43 #define LP8860_LED_FAULT                0x10
  44 #define LP8860_FAULT_CLEAR              0x11
  45 #define LP8860_ID                       0x12
  46 #define LP8860_TEMP_MSB                 0x13
  47 #define LP8860_TEMP_LSB                 0x14
  48 #define LP8860_DISP_LED_CURR_MSB        0x15
  49 #define LP8860_DISP_LED_CURR_LSB        0x16
  50 #define LP8860_DISP_LED_PWM_MSB         0x17
  51 #define LP8860_DISP_LED_PWM_LSB         0x18
  52 #define LP8860_EEPROM_CNTRL             0x19
  53 #define LP8860_EEPROM_UNLOCK            0x1a
  54
  55 #define LP8860_EEPROM_REG_0             0x60
  56 #define LP8860_EEPROM_REG_1             0x61
  57 #define LP8860_EEPROM_REG_2             0x62
  58 #define LP8860_EEPROM_REG_3             0x63
  59 #define LP8860_EEPROM_REG_4             0x64
  60 #define LP8860_EEPROM_REG_5             0x65
  61 #define LP8860_EEPROM_REG_6             0x66
  62 #define LP8860_EEPROM_REG_7             0x67
  63 #define LP8860_EEPROM_REG_8             0x68
  64 #define LP8860_EEPROM_REG_9             0x69
  65 #define LP8860_EEPROM_REG_10            0x6a
  66 #define LP8860_EEPROM_REG_11            0x6b
  67 #define LP8860_EEPROM_REG_12            0x6c
  68 #define LP8860_EEPROM_REG_13            0x6d
  69 #define LP8860_EEPROM_REG_14            0x6e
  70 #define LP8860_EEPROM_REG_15            0x6f
  71 #define LP8860_EEPROM_REG_16            0x70
  72 #define LP8860_EEPROM_REG_17            0x71
  73 #define LP8860_EEPROM_REG_18            0x72
  74 #define LP8860_EEPROM_REG_19            0x73
  75 #define LP8860_EEPROM_REG_20            0x74
  76 #define LP8860_EEPROM_REG_21            0x75
  77 #define LP8860_EEPROM_REG_22            0x76
  78 #define LP8860_EEPROM_REG_23            0x77
  79 #define LP8860_EEPROM_REG_24            0x78
  80
  81 #define LP8860_LOCK_EEPROM              0x00
  82 #define LP8860_UNLOCK_EEPROM            0x01
  83 #define LP8860_PROGRAM_EEPROM           0x02
  84 #define LP8860_EEPROM_CODE_1            0x08
  85 #define LP8860_EEPROM_CODE_2            0xba
  86 #define LP8860_EEPROM_CODE_3            0xef
  87
  88 #define LP8860_CLEAR_FAULTS             0x01
  89
  90 /**
  91  * struct lp8860_led -
  92  * @lock - Lock for reading/writing the device
  93  * @client - Pointer to the I2C client
  94  * @led_dev - led class device pointer
  95  * @regmap - Devices register map
  96  * @eeprom_regmap - EEPROM register map
  97  * @enable_gpio - VDDIO/EN gpio to enable communication interface
  98  * @regulator - LED supply regulator pointer
  99  * @label - LED label
 100  */
 101 struct lp8860_led {
 102         struct mutex lock;
 103         struct i2c_client *client;
 104         struct led_classdev led_dev;
 105         struct regmap *regmap;
 106         struct regmap *eeprom_regmap;
 107         struct gpio_desc *enable_gpio;
 108         struct regulator *regulator;
 109         char label[LED_MAX_NAME_SIZE];
 110 };
 111
 112 struct lp8860_eeprom_reg {
 113         uint8_t reg;
 114         uint8_t value;
 115 };
 116
 117 static struct lp8860_eeprom_reg lp8860_eeprom_disp_regs[] = {
 118         { LP8860_EEPROM_REG_0, 0xed },
 119         { LP8860_EEPROM_REG_1, 0xdf },
 120         { LP8860_EEPROM_REG_2, 0xdc },
 121         { LP8860_EEPROM_REG_3, 0xf0 },
 122         { LP8860_EEPROM_REG_4, 0xdf },
 123         { LP8860_EEPROM_REG_5, 0xe5 },
 124         { LP8860_EEPROM_REG_6, 0xf2 },
 125         { LP8860_EEPROM_REG_7, 0x77 },
 126         { LP8860_EEPROM_REG_8, 0x77 },
 127         { LP8860_EEPROM_REG_9, 0x71 },
 128         { LP8860_EEPROM_REG_10, 0x3f },
 129         { LP8860_EEPROM_REG_11, 0xb7 },
 130         { LP8860_EEPROM_REG_12, 0x17 },
 131         { LP8860_EEPROM_REG_13, 0xef },
 132         { LP8860_EEPROM_REG_14, 0xb0 },
 133         { LP8860_EEPROM_REG_15, 0x87 },
 134         { LP8860_EEPROM_REG_16, 0xce },
 135         { LP8860_EEPROM_REG_17, 0x72 },
 136         { LP8860_EEPROM_REG_18, 0xe5 },
 137         { LP8860_EEPROM_REG_19, 0xdf },
 138         { LP8860_EEPROM_REG_20, 0x35 },
 139         { LP8860_EEPROM_REG_21, 0x06 },
 140         { LP8860_EEPROM_REG_22, 0xdc },
 141         { LP8860_EEPROM_REG_23, 0x88 },
 142         { LP8860_EEPROM_REG_24, 0x3E },
 143 };
 144
 145 static int lp8860_unlock_eeprom(struct lp8860_led *led, int lock)
 146 {
 147         int ret;
 148
 149         mutex_lock(&led->lock);
 150
 151         if (lock == LP8860_UNLOCK_EEPROM) {
 152                 ret = regmap_write(led->regmap,
 153                         LP8860_EEPROM_UNLOCK,
 154                         LP8860_EEPROM_CODE_1);
 155                 if (ret) {
 156                         dev_err(&led->client->dev, "EEPROM Unlock failed\n");
 157                         goto out;
 158                 }
 159
 160                 ret = regmap_write(led->regmap,
 161                         LP8860_EEPROM_UNLOCK,
 162                         LP8860_EEPROM_CODE_2);
 163                 if (ret) {
 164                         dev_err(&led->client->dev, "EEPROM Unlock failed\n");
 165                         goto out;
 166                 }
 167                 ret = regmap_write(led->regmap,
 168                         LP8860_EEPROM_UNLOCK,
 169                         LP8860_EEPROM_CODE_3);
 170                 if (ret) {
 171                         dev_err(&led->client->dev, "EEPROM Unlock failed\n");
 172                         goto out;
 173                 }
 174         } else {
 175                 ret = regmap_write(led->regmap,
 176                         LP8860_EEPROM_UNLOCK,
 177                         LP8860_LOCK_EEPROM);
 178         }
 179
 180 out:
 181         mutex_unlock(&led->lock);
 182         return ret;
 183 }
 184
 185 static int lp8860_fault_check(struct lp8860_led *led)
 186 {
 187         int ret, fault;
 188         unsigned int read_buf;
 189
 190         ret = regmap_read(led->regmap, LP8860_LED_FAULT, &read_buf);
 191         if (ret)
 192                 goto out;
 193
 194         fault = read_buf;
 195
 196         ret = regmap_read(led->regmap, LP8860_FAULT, &read_buf);
 197         if (ret)
 198                 goto out;
 199
 200         fault |= read_buf;
 201
 202         /* Attempt to clear any faults */
 203         if (fault)
 204                 ret = regmap_write(led->regmap, LP8860_FAULT_CLEAR,
 205                         LP8860_CLEAR_FAULTS);
 206 out:
 207         return ret;
 208 }
 209
 210 static int lp8860_brightness_set(struct led_classdev *led_cdev,
 211                                 enum led_brightness brt_val)
 212 {
 213         struct lp8860_led *led =
 214                         container_of(led_cdev, struct lp8860_led, led_dev);
 215         int disp_brightness = brt_val * 255;
 216         int ret;
 217
 218         mutex_lock(&led->lock);
 219
 220         ret = lp8860_fault_check(led);
 221         if (ret) {
 222                 dev_err(&led->client->dev, "Cannot read/clear faults\n");
 223                 goto out;
 224         }
 225
 226         ret = regmap_write(led->regmap, LP8860_DISP_CL1_BRT_MSB,
 227                         (disp_brightness & 0xff00) >> 8);
 228         if (ret) {
 229                 dev_err(&led->client->dev, "Cannot write CL1 MSB\n");
 230                 goto out;
 231         }
 232
 233         ret = regmap_write(led->regmap, LP8860_DISP_CL1_BRT_LSB,
 234                         disp_brightness & 0xff);
 235         if (ret) {
 236                 dev_err(&led->client->dev, "Cannot write CL1 LSB\n");
 237                 goto out;
 238         }
 239 out:
 240         mutex_unlock(&led->lock);
 241         return ret;
 242 }
 243
 244 static int lp8860_init(struct lp8860_led *led)
 245 {
 246         unsigned int read_buf;
 247         int ret, i, reg_count;
 248
 249         if (led->regulator) {
 250                 ret = regulator_enable(led->regulator);
 251                 if (ret) {
 252                         dev_err(&led->client->dev,
 253                                 "Failed to enable regulator\n");
 254                         return ret;
 255                 }
 256         }
 257
 258         if (led->enable_gpio)
 259                 gpiod_direction_output(led->enable_gpio, 1);
 260
 261         ret = lp8860_fault_check(led);
 262         if (ret)
 263                 goto out;
 264
 265         ret = regmap_read(led->regmap, LP8860_STATUS, &read_buf);
 266         if (ret)
 267                 goto out;
 268
 269         ret = lp8860_unlock_eeprom(led, LP8860_UNLOCK_EEPROM);
 270         if (ret) {
 271                 dev_err(&led->client->dev, "Failed unlocking EEPROM\n");
 272                 goto out;
 273         }
 274
 275         reg_count = ARRAY_SIZE(lp8860_eeprom_disp_regs) / sizeof(lp8860_eeprom_disp_regs[0]);
 276         for (i = 0; i < reg_count; i++) {
 277                 ret = regmap_write(led->eeprom_regmap,
 278                                 lp8860_eeprom_disp_regs[i].reg,
 279                                 lp8860_eeprom_disp_regs[i].value);
 280                 if (ret) {
 281                         dev_err(&led->client->dev, "Failed writing EEPROM\n");
 282                         goto out;
 283                 }
 284         }
 285
 286         ret = lp8860_unlock_eeprom(led, LP8860_LOCK_EEPROM);
 287         if (ret)
 288                 goto out;
 289
 290         ret = regmap_write(led->regmap,
 291                         LP8860_EEPROM_CNTRL,
 292                         LP8860_PROGRAM_EEPROM);
 293         if (ret) {
 294                 dev_err(&led->client->dev, "Failed programming EEPROM\n");
 295                 goto out;
 296         }
 297
 298         return ret;
 299
 300 out:
 301         if (ret)
 302                 if (led->enable_gpio)
 303                         gpiod_direction_output(led->enable_gpio, 0);
 304
 305         if (led->regulator) {
 306                 ret = regulator_disable(led->regulator);
 307                 if (ret)
 308                         dev_err(&led->client->dev,
 309                                 "Failed to disable regulator\n");
 310         }
 311
 312         return ret;
 313 }
 314
 315 static const struct reg_default lp8860_reg_defs[] = {
 316         { LP8860_DISP_CL1_BRT_MSB, 0x00},
 317         { LP8860_DISP_CL1_BRT_LSB, 0x00},
 318         { LP8860_DISP_CL1_CURR_MSB, 0x00},
 319         { LP8860_DISP_CL1_CURR_LSB, 0x00},
 320         { LP8860_CL2_BRT_MSB, 0x00},
 321         { LP8860_CL2_BRT_LSB, 0x00},
 322         { LP8860_CL2_CURRENT, 0x00},
 323         { LP8860_CL3_BRT_MSB, 0x00},
 324         { LP8860_CL3_BRT_LSB, 0x00},
 325         { LP8860_CL3_CURRENT, 0x00},
 326         { LP8860_CL4_BRT_MSB, 0x00},
 327         { LP8860_CL4_BRT_LSB, 0x00},
 328         { LP8860_CL4_CURRENT, 0x00},
 329         { LP8860_CONFIG, 0x00},
 330         { LP8860_FAULT_CLEAR, 0x00},
 331         { LP8860_EEPROM_CNTRL, 0x80},
 332         { LP8860_EEPROM_UNLOCK, 0x00},
 333 };
 334
 335 static const struct regmap_config lp8860_regmap_config = {
 336         .reg_bits = 8,
 337         .val_bits = 8,
 338
 339         .max_register = LP8860_EEPROM_UNLOCK,
 340         .reg_defaults = lp8860_reg_defs,
 341         .num_reg_defaults = ARRAY_SIZE(lp8860_reg_defs),
 342         .cache_type = REGCACHE_NONE,
 343 };
 344
 345 static const struct reg_default lp8860_eeprom_defs[] = {
 346         { LP8860_EEPROM_REG_0, 0x00 },
 347         { LP8860_EEPROM_REG_1, 0x00 },
 348         { LP8860_EEPROM_REG_2, 0x00 },
 349         { LP8860_EEPROM_REG_3, 0x00 },
 350         { LP8860_EEPROM_REG_4, 0x00 },
 351         { LP8860_EEPROM_REG_5, 0x00 },
 352         { LP8860_EEPROM_REG_6, 0x00 },
 353         { LP8860_EEPROM_REG_7, 0x00 },
 354         { LP8860_EEPROM_REG_8, 0x00 },
 355         { LP8860_EEPROM_REG_9, 0x00 },
 356         { LP8860_EEPROM_REG_10, 0x00 },
 357         { LP8860_EEPROM_REG_11, 0x00 },
 358         { LP8860_EEPROM_REG_12, 0x00 },
 359         { LP8860_EEPROM_REG_13, 0x00 },
 360         { LP8860_EEPROM_REG_14, 0x00 },
 361         { LP8860_EEPROM_REG_15, 0x00 },
 362         { LP8860_EEPROM_REG_16, 0x00 },
 363         { LP8860_EEPROM_REG_17, 0x00 },
 364         { LP8860_EEPROM_REG_18, 0x00 },
 365         { LP8860_EEPROM_REG_19, 0x00 },
 366         { LP8860_EEPROM_REG_20, 0x00 },
 367         { LP8860_EEPROM_REG_21, 0x00 },
 368         { LP8860_EEPROM_REG_22, 0x00 },
 369         { LP8860_EEPROM_REG_23, 0x00 },
 370         { LP8860_EEPROM_REG_24, 0x00 },
 371 };
 372
 373 static const struct regmap_config lp8860_eeprom_regmap_config = {
 374         .reg_bits = 8,
 375         .val_bits = 8,
 376
 377         .max_register = LP8860_EEPROM_REG_24,
 378         .reg_defaults = lp8860_eeprom_defs,
 379         .num_reg_defaults = ARRAY_SIZE(lp8860_eeprom_defs),
 380         .cache_type = REGCACHE_NONE,
 381 };
 382
 383 static int lp8860_probe(struct i2c_client *client,
 384                         const struct i2c_device_id *id)
 385 {
 386         int ret;
 387         struct lp8860_led *led;
 388         struct device_node *np = client->dev.of_node;
 389         struct device_node *child_node;
 390         const char *name;
 391
 392         led = devm_kzalloc(&client->dev, sizeof(*led), GFP_KERNEL);
 393         if (!led)
 394                 return -ENOMEM;
 395
 396         for_each_available_child_of_node(np, child_node) {
 397                 led->led_dev.default_trigger = of_get_property(child_node,
 398                                                     "linux,default-trigger",
 399                                                     NULL);
 400
 401                 ret = of_property_read_string(child_node, "label", &name);
 402                 if (!ret)
 403                         snprintf(led->label, sizeof(led->label), "%s:%s",
 404                                  id->name, name);
 405                 else
 406                         snprintf(led->label, sizeof(led->label),
 407                                 "%s::display_cluster", id->name);
 408         }
 409
 410         led->enable_gpio = devm_gpiod_get_optional(&client->dev,
 411                                                    "enable", GPIOD_OUT_LOW);
 412         if (IS_ERR(led->enable_gpio)) {
 413                 ret = PTR_ERR(led->enable_gpio);
 414                 dev_err(&client->dev, "Failed to get enable gpio: %d\n", ret);
 415                 return ret;
 416         }
 417
 418         led->regulator = devm_regulator_get(&client->dev, "vled");
 419         if (IS_ERR(led->regulator))
 420                 led->regulator = NULL;
 421
 422         led->client = client;
 423         led->led_dev.name = led->label;
 424         led->led_dev.brightness_set_blocking = lp8860_brightness_set;
 425
 426         mutex_init(&led->lock);
 427
 428         i2c_set_clientdata(client, led);
 429
 430         led->regmap = devm_regmap_init_i2c(client, &lp8860_regmap_config);
 431         if (IS_ERR(led->regmap)) {
 432                 ret = PTR_ERR(led->regmap);
 433                 dev_err(&client->dev, "Failed to allocate register map: %d\n",
 434                         ret);
 435                 return ret;
 436         }
 437
 438         led->eeprom_regmap = devm_regmap_init_i2c(client, &lp8860_eeprom_regmap_config);
 439         if (IS_ERR(led->eeprom_regmap)) {
 440                 ret = PTR_ERR(led->eeprom_regmap);
 441                 dev_err(&client->dev, "Failed to allocate register map: %d\n",
 442                         ret);
 443                 return ret;
 444         }
 445
 446         ret = lp8860_init(led);
 447         if (ret)
 448                 return ret;
 449
 450         ret = devm_led_classdev_register(&client->dev, &led->led_dev);
 451         if (ret) {
 452                 dev_err(&client->dev, "led register err: %d\n", ret);
 453                 return ret;
 454         }
 455
 456         return 0;
 457 }
 458
 459 static int lp8860_remove(struct i2c_client *client)
 460 {
 461         struct lp8860_led *led = i2c_get_clientdata(client);
 462         int ret;
 463
 464         if (led->enable_gpio)
 465                 gpiod_direction_output(led->enable_gpio, 0);
 466
 467         if (led->regulator) {
 468                 ret = regulator_disable(led->regulator);
 469                 if (ret)
 470                         dev_err(&led->client->dev,
 471                                 "Failed to disable regulator\n");
 472         }
 473
 474         mutex_destroy(&led->lock);
 475
 476         return 0;
 477 }
 478
 479 static const struct i2c_device_id lp8860_id[] = {
 480         { "lp8860", 0 },
 481         { }
 482 };
 483 MODULE_DEVICE_TABLE(i2c, lp8860_id);
 484
 485 static const struct of_device_id of_lp8860_leds_match[] = {
 486         { .compatible = "ti,lp8860", },
 487         {},
 488 };
 489 MODULE_DEVICE_TABLE(of, of_lp8860_leds_match);
 490
 491 static struct i2c_driver lp8860_driver = {
 492         .driver = {
 493                 .name   = "lp8860",
 494                 .of_match_table = of_lp8860_leds_match,
 495         },
 496         .probe          = lp8860_probe,
 497         .remove         = lp8860_remove,
 498         .id_table       = lp8860_id,
 499 };
 500 module_i2c_driver(lp8860_driver);
 501
 502 MODULE_DESCRIPTION("Texas Instruments LP8860 LED driver");
 503 MODULE_AUTHOR("Dan Murphy <[email protected]>");
 504 MODULE_LICENSE("GPL v2");