1 // SPDX-License-Identifier: GPL-2.0
3 * thermal.c - sysfs interface of thermal devices
7 * Highly based on original thermal_core.c
8 * Copyright (C) 2008 Intel Corp
13 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
15 #include <linux/sysfs.h>
16 #include <linux/device.h>
17 #include <linux/err.h>
18 #include <linux/slab.h>
19 #include <linux/string.h>
20 #include <linux/jiffies.h>
22 #include "thermal_core.h"
24 /* sys I/F for thermal zone */
27 type_show(struct device *dev, struct device_attribute *attr, char *buf)
29 struct thermal_zone_device *tz = to_thermal_zone(dev);
31 return sprintf(buf, "%s\n", tz->type);
35 temp_show(struct device *dev, struct device_attribute *attr, char *buf)
37 struct thermal_zone_device *tz = to_thermal_zone(dev);
40 ret = thermal_zone_get_temp(tz, &temperature);
45 return sprintf(buf, "%d\n", temperature);
49 mode_show(struct device *dev, struct device_attribute *attr, char *buf)
51 struct thermal_zone_device *tz = to_thermal_zone(dev);
52 enum thermal_device_mode mode;
55 if (!tz->ops->get_mode)
58 result = tz->ops->get_mode(tz, &mode);
62 return sprintf(buf, "%s\n", mode == THERMAL_DEVICE_ENABLED ? "enabled"
67 mode_store(struct device *dev, struct device_attribute *attr,
68 const char *buf, size_t count)
70 struct thermal_zone_device *tz = to_thermal_zone(dev);
73 if (!tz->ops->set_mode)
76 if (!strncmp(buf, "enabled", sizeof("enabled") - 1))
77 result = tz->ops->set_mode(tz, THERMAL_DEVICE_ENABLED);
78 else if (!strncmp(buf, "disabled", sizeof("disabled") - 1))
79 result = tz->ops->set_mode(tz, THERMAL_DEVICE_DISABLED);
90 trip_point_type_show(struct device *dev, struct device_attribute *attr,
93 struct thermal_zone_device *tz = to_thermal_zone(dev);
94 enum thermal_trip_type type;
97 if (!tz->ops->get_trip_type)
100 if (sscanf(attr->attr.name, "trip_point_%d_type", &trip) != 1)
103 result = tz->ops->get_trip_type(tz, trip, &type);
108 case THERMAL_TRIP_CRITICAL:
109 return sprintf(buf, "critical\n");
110 case THERMAL_TRIP_HOT:
111 return sprintf(buf, "hot\n");
112 case THERMAL_TRIP_PASSIVE:
113 return sprintf(buf, "passive\n");
114 case THERMAL_TRIP_ACTIVE:
115 return sprintf(buf, "active\n");
117 return sprintf(buf, "unknown\n");
122 trip_point_temp_store(struct device *dev, struct device_attribute *attr,
123 const char *buf, size_t count)
125 struct thermal_zone_device *tz = to_thermal_zone(dev);
129 if (!tz->ops->set_trip_temp)
132 if (sscanf(attr->attr.name, "trip_point_%d_temp", &trip) != 1)
135 if (kstrtoint(buf, 10, &temperature))
138 ret = tz->ops->set_trip_temp(tz, trip, temperature);
142 thermal_zone_device_update(tz, THERMAL_EVENT_UNSPECIFIED);
148 trip_point_temp_show(struct device *dev, struct device_attribute *attr,
151 struct thermal_zone_device *tz = to_thermal_zone(dev);
155 if (!tz->ops->get_trip_temp)
158 if (sscanf(attr->attr.name, "trip_point_%d_temp", &trip) != 1)
161 ret = tz->ops->get_trip_temp(tz, trip, &temperature);
166 return sprintf(buf, "%d\n", temperature);
170 trip_point_hyst_store(struct device *dev, struct device_attribute *attr,
171 const char *buf, size_t count)
173 struct thermal_zone_device *tz = to_thermal_zone(dev);
177 if (!tz->ops->set_trip_hyst)
180 if (sscanf(attr->attr.name, "trip_point_%d_hyst", &trip) != 1)
183 if (kstrtoint(buf, 10, &temperature))
187 * We are not doing any check on the 'temperature' value
188 * here. The driver implementing 'set_trip_hyst' has to
191 ret = tz->ops->set_trip_hyst(tz, trip, temperature);
194 thermal_zone_set_trips(tz);
196 return ret ? ret : count;
200 trip_point_hyst_show(struct device *dev, struct device_attribute *attr,
203 struct thermal_zone_device *tz = to_thermal_zone(dev);
207 if (!tz->ops->get_trip_hyst)
210 if (sscanf(attr->attr.name, "trip_point_%d_hyst", &trip) != 1)
213 ret = tz->ops->get_trip_hyst(tz, trip, &temperature);
215 return ret ? ret : sprintf(buf, "%d\n", temperature);
219 passive_store(struct device *dev, struct device_attribute *attr,
220 const char *buf, size_t count)
222 struct thermal_zone_device *tz = to_thermal_zone(dev);
225 if (sscanf(buf, "%d\n", &state) != 1)
228 /* sanity check: values below 1000 millicelcius don't make sense
229 * and can cause the system to go into a thermal heart attack
231 if (state && state < 1000)
234 if (state && !tz->forced_passive) {
235 if (!tz->passive_delay)
236 tz->passive_delay = 1000;
237 thermal_zone_device_rebind_exception(tz, "Processor",
238 sizeof("Processor"));
239 } else if (!state && tz->forced_passive) {
240 tz->passive_delay = 0;
241 thermal_zone_device_unbind_exception(tz, "Processor",
242 sizeof("Processor"));
245 tz->forced_passive = state;
247 thermal_zone_device_update(tz, THERMAL_EVENT_UNSPECIFIED);
253 passive_show(struct device *dev, struct device_attribute *attr,
256 struct thermal_zone_device *tz = to_thermal_zone(dev);
258 return sprintf(buf, "%d\n", tz->forced_passive);
262 policy_store(struct device *dev, struct device_attribute *attr,
263 const char *buf, size_t count)
265 struct thermal_zone_device *tz = to_thermal_zone(dev);
266 char name[THERMAL_NAME_LENGTH];
269 snprintf(name, sizeof(name), "%s", buf);
271 ret = thermal_zone_device_set_policy(tz, name);
279 policy_show(struct device *dev, struct device_attribute *devattr, char *buf)
281 struct thermal_zone_device *tz = to_thermal_zone(dev);
283 return sprintf(buf, "%s\n", tz->governor->name);
287 available_policies_show(struct device *dev, struct device_attribute *devattr,
290 return thermal_build_list_of_policies(buf);
293 #if (IS_ENABLED(CONFIG_THERMAL_EMULATION))
295 emul_temp_store(struct device *dev, struct device_attribute *attr,
296 const char *buf, size_t count)
298 struct thermal_zone_device *tz = to_thermal_zone(dev);
302 if (kstrtoint(buf, 10, &temperature))
305 if (!tz->ops->set_emul_temp) {
306 mutex_lock(&tz->lock);
307 tz->emul_temperature = temperature;
308 mutex_unlock(&tz->lock);
310 ret = tz->ops->set_emul_temp(tz, temperature);
314 thermal_zone_device_update(tz, THERMAL_EVENT_UNSPECIFIED);
316 return ret ? ret : count;
318 static DEVICE_ATTR_WO(emul_temp);
322 sustainable_power_show(struct device *dev, struct device_attribute *devattr,
325 struct thermal_zone_device *tz = to_thermal_zone(dev);
328 return sprintf(buf, "%u\n", tz->tzp->sustainable_power);
334 sustainable_power_store(struct device *dev, struct device_attribute *devattr,
335 const char *buf, size_t count)
337 struct thermal_zone_device *tz = to_thermal_zone(dev);
338 u32 sustainable_power;
343 if (kstrtou32(buf, 10, &sustainable_power))
346 tz->tzp->sustainable_power = sustainable_power;
351 #define create_s32_tzp_attr(name) \
353 name##_show(struct device *dev, struct device_attribute *devattr, \
356 struct thermal_zone_device *tz = to_thermal_zone(dev); \
359 return sprintf(buf, "%d\n", tz->tzp->name); \
365 name##_store(struct device *dev, struct device_attribute *devattr, \
366 const char *buf, size_t count) \
368 struct thermal_zone_device *tz = to_thermal_zone(dev); \
374 if (kstrtos32(buf, 10, &value)) \
377 tz->tzp->name = value; \
381 static DEVICE_ATTR_RW(name)
383 create_s32_tzp_attr(k_po);
384 create_s32_tzp_attr(k_pu);
385 create_s32_tzp_attr(k_i);
386 create_s32_tzp_attr(k_d);
387 create_s32_tzp_attr(integral_cutoff);
388 create_s32_tzp_attr(slope);
389 create_s32_tzp_attr(offset);
390 #undef create_s32_tzp_attr
393 * These are thermal zone device attributes that will always be present.
394 * All the attributes created for tzp (create_s32_tzp_attr) also are always
395 * present on the sysfs interface.
397 static DEVICE_ATTR_RO(type);
398 static DEVICE_ATTR_RO(temp);
399 static DEVICE_ATTR_RW(policy);
400 static DEVICE_ATTR_RO(available_policies);
401 static DEVICE_ATTR_RW(sustainable_power);
403 /* These thermal zone device attributes are created based on conditions */
404 static DEVICE_ATTR_RW(mode);
405 static DEVICE_ATTR_RW(passive);
407 /* These attributes are unconditionally added to a thermal zone */
408 static struct attribute *thermal_zone_dev_attrs[] = {
411 #if (IS_ENABLED(CONFIG_THERMAL_EMULATION))
412 &dev_attr_emul_temp.attr,
414 &dev_attr_policy.attr,
415 &dev_attr_available_policies.attr,
416 &dev_attr_sustainable_power.attr,
421 &dev_attr_integral_cutoff.attr,
422 &dev_attr_slope.attr,
423 &dev_attr_offset.attr,
427 static struct attribute_group thermal_zone_attribute_group = {
428 .attrs = thermal_zone_dev_attrs,
431 /* We expose mode only if .get_mode is present */
432 static struct attribute *thermal_zone_mode_attrs[] = {
437 static umode_t thermal_zone_mode_is_visible(struct kobject *kobj,
438 struct attribute *attr,
441 struct device *dev = container_of(kobj, struct device, kobj);
442 struct thermal_zone_device *tz;
444 tz = container_of(dev, struct thermal_zone_device, device);
446 if (tz->ops->get_mode)
452 static struct attribute_group thermal_zone_mode_attribute_group = {
453 .attrs = thermal_zone_mode_attrs,
454 .is_visible = thermal_zone_mode_is_visible,
457 /* We expose passive only if passive trips are present */
458 static struct attribute *thermal_zone_passive_attrs[] = {
459 &dev_attr_passive.attr,
463 static umode_t thermal_zone_passive_is_visible(struct kobject *kobj,
464 struct attribute *attr,
467 struct device *dev = container_of(kobj, struct device, kobj);
468 struct thermal_zone_device *tz;
469 enum thermal_trip_type trip_type;
470 int count, passive = 0;
472 tz = container_of(dev, struct thermal_zone_device, device);
474 for (count = 0; count < tz->trips && !passive; count++) {
475 tz->ops->get_trip_type(tz, count, &trip_type);
477 if (trip_type == THERMAL_TRIP_PASSIVE)
487 static struct attribute_group thermal_zone_passive_attribute_group = {
488 .attrs = thermal_zone_passive_attrs,
489 .is_visible = thermal_zone_passive_is_visible,
492 static const struct attribute_group *thermal_zone_attribute_groups[] = {
493 &thermal_zone_attribute_group,
494 &thermal_zone_mode_attribute_group,
495 &thermal_zone_passive_attribute_group,
496 /* This is not NULL terminated as we create the group dynamically */
500 * create_trip_attrs() - create attributes for trip points
501 * @tz: the thermal zone device
502 * @mask: Writeable trip point bitmap.
504 * helper function to instantiate sysfs entries for every trip
505 * point and its properties of a struct thermal_zone_device.
507 * Return: 0 on success, the proper error value otherwise.
509 static int create_trip_attrs(struct thermal_zone_device *tz, int mask)
511 struct attribute **attrs;
514 /* This function works only for zones with at least one trip */
518 tz->trip_type_attrs = kcalloc(tz->trips, sizeof(*tz->trip_type_attrs),
520 if (!tz->trip_type_attrs)
523 tz->trip_temp_attrs = kcalloc(tz->trips, sizeof(*tz->trip_temp_attrs),
525 if (!tz->trip_temp_attrs) {
526 kfree(tz->trip_type_attrs);
530 if (tz->ops->get_trip_hyst) {
531 tz->trip_hyst_attrs = kcalloc(tz->trips,
532 sizeof(*tz->trip_hyst_attrs),
534 if (!tz->trip_hyst_attrs) {
535 kfree(tz->trip_type_attrs);
536 kfree(tz->trip_temp_attrs);
541 attrs = kcalloc(tz->trips * 3 + 1, sizeof(*attrs), GFP_KERNEL);
543 kfree(tz->trip_type_attrs);
544 kfree(tz->trip_temp_attrs);
545 if (tz->ops->get_trip_hyst)
546 kfree(tz->trip_hyst_attrs);
550 for (indx = 0; indx < tz->trips; indx++) {
551 /* create trip type attribute */
552 snprintf(tz->trip_type_attrs[indx].name, THERMAL_NAME_LENGTH,
553 "trip_point_%d_type", indx);
555 sysfs_attr_init(&tz->trip_type_attrs[indx].attr.attr);
556 tz->trip_type_attrs[indx].attr.attr.name =
557 tz->trip_type_attrs[indx].name;
558 tz->trip_type_attrs[indx].attr.attr.mode = S_IRUGO;
559 tz->trip_type_attrs[indx].attr.show = trip_point_type_show;
560 attrs[indx] = &tz->trip_type_attrs[indx].attr.attr;
562 /* create trip temp attribute */
563 snprintf(tz->trip_temp_attrs[indx].name, THERMAL_NAME_LENGTH,
564 "trip_point_%d_temp", indx);
566 sysfs_attr_init(&tz->trip_temp_attrs[indx].attr.attr);
567 tz->trip_temp_attrs[indx].attr.attr.name =
568 tz->trip_temp_attrs[indx].name;
569 tz->trip_temp_attrs[indx].attr.attr.mode = S_IRUGO;
570 tz->trip_temp_attrs[indx].attr.show = trip_point_temp_show;
571 if (IS_ENABLED(CONFIG_THERMAL_WRITABLE_TRIPS) &&
572 mask & (1 << indx)) {
573 tz->trip_temp_attrs[indx].attr.attr.mode |= S_IWUSR;
574 tz->trip_temp_attrs[indx].attr.store =
575 trip_point_temp_store;
577 attrs[indx + tz->trips] = &tz->trip_temp_attrs[indx].attr.attr;
579 /* create Optional trip hyst attribute */
580 if (!tz->ops->get_trip_hyst)
582 snprintf(tz->trip_hyst_attrs[indx].name, THERMAL_NAME_LENGTH,
583 "trip_point_%d_hyst", indx);
585 sysfs_attr_init(&tz->trip_hyst_attrs[indx].attr.attr);
586 tz->trip_hyst_attrs[indx].attr.attr.name =
587 tz->trip_hyst_attrs[indx].name;
588 tz->trip_hyst_attrs[indx].attr.attr.mode = S_IRUGO;
589 tz->trip_hyst_attrs[indx].attr.show = trip_point_hyst_show;
590 if (tz->ops->set_trip_hyst) {
591 tz->trip_hyst_attrs[indx].attr.attr.mode |= S_IWUSR;
592 tz->trip_hyst_attrs[indx].attr.store =
593 trip_point_hyst_store;
595 attrs[indx + tz->trips * 2] =
596 &tz->trip_hyst_attrs[indx].attr.attr;
598 attrs[tz->trips * 3] = NULL;
600 tz->trips_attribute_group.attrs = attrs;
606 * destroy_trip_attrs() - destroy attributes for trip points
607 * @tz: the thermal zone device
609 * helper function to free resources allocated by create_trip_attrs()
611 static void destroy_trip_attrs(struct thermal_zone_device *tz)
616 kfree(tz->trip_type_attrs);
617 kfree(tz->trip_temp_attrs);
618 if (tz->ops->get_trip_hyst)
619 kfree(tz->trip_hyst_attrs);
620 kfree(tz->trips_attribute_group.attrs);
623 int thermal_zone_create_device_groups(struct thermal_zone_device *tz,
626 const struct attribute_group **groups;
629 /* we need one extra for trips and the NULL to terminate the array */
630 size = ARRAY_SIZE(thermal_zone_attribute_groups) + 2;
631 /* This also takes care of API requirement to be NULL terminated */
632 groups = kcalloc(size, sizeof(*groups), GFP_KERNEL);
636 for (i = 0; i < size - 2; i++)
637 groups[i] = thermal_zone_attribute_groups[i];
640 result = create_trip_attrs(tz, mask);
647 groups[size - 2] = &tz->trips_attribute_group;
650 tz->device.groups = groups;
655 void thermal_zone_destroy_device_groups(struct thermal_zone_device *tz)
661 destroy_trip_attrs(tz);
663 kfree(tz->device.groups);
666 /* sys I/F for cooling device */
668 cdev_type_show(struct device *dev, struct device_attribute *attr, char *buf)
670 struct thermal_cooling_device *cdev = to_cooling_device(dev);
672 return sprintf(buf, "%s\n", cdev->type);
675 static ssize_t max_state_show(struct device *dev, struct device_attribute *attr,
678 struct thermal_cooling_device *cdev = to_cooling_device(dev);
682 ret = cdev->ops->get_max_state(cdev, &state);
685 return sprintf(buf, "%ld\n", state);
688 static ssize_t cur_state_show(struct device *dev, struct device_attribute *attr,
691 struct thermal_cooling_device *cdev = to_cooling_device(dev);
695 ret = cdev->ops->get_cur_state(cdev, &state);
698 return sprintf(buf, "%ld\n", state);
702 cur_state_store(struct device *dev, struct device_attribute *attr,
703 const char *buf, size_t count)
705 struct thermal_cooling_device *cdev = to_cooling_device(dev);
709 if (sscanf(buf, "%ld\n", &state) != 1)
715 mutex_lock(&cdev->lock);
717 result = cdev->ops->set_cur_state(cdev, state);
719 thermal_cooling_device_stats_update(cdev, state);
721 mutex_unlock(&cdev->lock);
722 return result ? result : count;
725 static struct device_attribute
726 dev_attr_cdev_type = __ATTR(type, 0444, cdev_type_show, NULL);
727 static DEVICE_ATTR_RO(max_state);
728 static DEVICE_ATTR_RW(cur_state);
730 static struct attribute *cooling_device_attrs[] = {
731 &dev_attr_cdev_type.attr,
732 &dev_attr_max_state.attr,
733 &dev_attr_cur_state.attr,
737 static const struct attribute_group cooling_device_attr_group = {
738 .attrs = cooling_device_attrs,
741 static const struct attribute_group *cooling_device_attr_groups[] = {
742 &cooling_device_attr_group,
743 NULL, /* Space allocated for cooling_device_stats_attr_group */
747 #ifdef CONFIG_THERMAL_STATISTICS
748 struct cooling_dev_stats {
750 unsigned int total_trans;
752 unsigned long max_states;
754 ktime_t *time_in_state;
755 unsigned int *trans_table;
758 static void update_time_in_state(struct cooling_dev_stats *stats)
760 ktime_t now = ktime_get(), delta;
762 delta = ktime_sub(now, stats->last_time);
763 stats->time_in_state[stats->state] =
764 ktime_add(stats->time_in_state[stats->state], delta);
765 stats->last_time = now;
768 void thermal_cooling_device_stats_update(struct thermal_cooling_device *cdev,
769 unsigned long new_state)
771 struct cooling_dev_stats *stats = cdev->stats;
773 spin_lock(&stats->lock);
775 if (stats->state == new_state)
778 update_time_in_state(stats);
779 stats->trans_table[stats->state * stats->max_states + new_state]++;
780 stats->state = new_state;
781 stats->total_trans++;
784 spin_unlock(&stats->lock);
787 static ssize_t total_trans_show(struct device *dev,
788 struct device_attribute *attr, char *buf)
790 struct thermal_cooling_device *cdev = to_cooling_device(dev);
791 struct cooling_dev_stats *stats = cdev->stats;
794 spin_lock(&stats->lock);
795 ret = sprintf(buf, "%u\n", stats->total_trans);
796 spin_unlock(&stats->lock);
802 time_in_state_ms_show(struct device *dev, struct device_attribute *attr,
805 struct thermal_cooling_device *cdev = to_cooling_device(dev);
806 struct cooling_dev_stats *stats = cdev->stats;
810 spin_lock(&stats->lock);
811 update_time_in_state(stats);
813 for (i = 0; i < stats->max_states; i++) {
814 len += sprintf(buf + len, "state%u\t%llu\n", i,
815 ktime_to_ms(stats->time_in_state[i]));
817 spin_unlock(&stats->lock);
823 reset_store(struct device *dev, struct device_attribute *attr, const char *buf,
826 struct thermal_cooling_device *cdev = to_cooling_device(dev);
827 struct cooling_dev_stats *stats = cdev->stats;
828 int i, states = stats->max_states;
830 spin_lock(&stats->lock);
832 stats->total_trans = 0;
833 stats->last_time = ktime_get();
834 memset(stats->trans_table, 0,
835 states * states * sizeof(*stats->trans_table));
837 for (i = 0; i < stats->max_states; i++)
838 stats->time_in_state[i] = ktime_set(0, 0);
840 spin_unlock(&stats->lock);
845 static ssize_t trans_table_show(struct device *dev,
846 struct device_attribute *attr, char *buf)
848 struct thermal_cooling_device *cdev = to_cooling_device(dev);
849 struct cooling_dev_stats *stats = cdev->stats;
853 len += snprintf(buf + len, PAGE_SIZE - len, " From : To\n");
854 len += snprintf(buf + len, PAGE_SIZE - len, " : ");
855 for (i = 0; i < stats->max_states; i++) {
856 if (len >= PAGE_SIZE)
858 len += snprintf(buf + len, PAGE_SIZE - len, "state%2u ", i);
860 if (len >= PAGE_SIZE)
863 len += snprintf(buf + len, PAGE_SIZE - len, "\n");
865 for (i = 0; i < stats->max_states; i++) {
866 if (len >= PAGE_SIZE)
869 len += snprintf(buf + len, PAGE_SIZE - len, "state%2u:", i);
871 for (j = 0; j < stats->max_states; j++) {
872 if (len >= PAGE_SIZE)
874 len += snprintf(buf + len, PAGE_SIZE - len, "%8u ",
875 stats->trans_table[i * stats->max_states + j]);
877 if (len >= PAGE_SIZE)
879 len += snprintf(buf + len, PAGE_SIZE - len, "\n");
882 if (len >= PAGE_SIZE) {
883 pr_warn_once("Thermal transition table exceeds PAGE_SIZE. Disabling\n");
889 static DEVICE_ATTR_RO(total_trans);
890 static DEVICE_ATTR_RO(time_in_state_ms);
891 static DEVICE_ATTR_WO(reset);
892 static DEVICE_ATTR_RO(trans_table);
894 static struct attribute *cooling_device_stats_attrs[] = {
895 &dev_attr_total_trans.attr,
896 &dev_attr_time_in_state_ms.attr,
897 &dev_attr_reset.attr,
898 &dev_attr_trans_table.attr,
902 static const struct attribute_group cooling_device_stats_attr_group = {
903 .attrs = cooling_device_stats_attrs,
907 static void cooling_device_stats_setup(struct thermal_cooling_device *cdev)
909 struct cooling_dev_stats *stats;
910 unsigned long states;
913 if (cdev->ops->get_max_state(cdev, &states))
916 states++; /* Total number of states is highest state + 1 */
918 var = sizeof(*stats);
919 var += sizeof(*stats->time_in_state) * states;
920 var += sizeof(*stats->trans_table) * states * states;
922 stats = kzalloc(var, GFP_KERNEL);
926 stats->time_in_state = (ktime_t *)(stats + 1);
927 stats->trans_table = (unsigned int *)(stats->time_in_state + states);
929 stats->last_time = ktime_get();
930 stats->max_states = states;
932 spin_lock_init(&stats->lock);
934 /* Fill the empty slot left in cooling_device_attr_groups */
935 var = ARRAY_SIZE(cooling_device_attr_groups) - 2;
936 cooling_device_attr_groups[var] = &cooling_device_stats_attr_group;
939 static void cooling_device_stats_destroy(struct thermal_cooling_device *cdev)
948 cooling_device_stats_setup(struct thermal_cooling_device *cdev) {}
950 cooling_device_stats_destroy(struct thermal_cooling_device *cdev) {}
952 #endif /* CONFIG_THERMAL_STATISTICS */
954 void thermal_cooling_device_setup_sysfs(struct thermal_cooling_device *cdev)
956 cooling_device_stats_setup(cdev);
957 cdev->device.groups = cooling_device_attr_groups;
960 void thermal_cooling_device_destroy_sysfs(struct thermal_cooling_device *cdev)
962 cooling_device_stats_destroy(cdev);
965 /* these helper will be used only at the time of bindig */
967 trip_point_show(struct device *dev, struct device_attribute *attr, char *buf)
969 struct thermal_instance *instance;
972 container_of(attr, struct thermal_instance, attr);
974 if (instance->trip == THERMAL_TRIPS_NONE)
975 return sprintf(buf, "-1\n");
977 return sprintf(buf, "%d\n", instance->trip);
981 weight_show(struct device *dev, struct device_attribute *attr, char *buf)
983 struct thermal_instance *instance;
985 instance = container_of(attr, struct thermal_instance, weight_attr);
987 return sprintf(buf, "%d\n", instance->weight);
990 ssize_t weight_store(struct device *dev, struct device_attribute *attr,
991 const char *buf, size_t count)
993 struct thermal_instance *instance;
996 ret = kstrtoint(buf, 0, &weight);
1000 instance = container_of(attr, struct thermal_instance, weight_attr);
1001 instance->weight = weight;