drivers/usb/typec/tcpm/fusb302.c

   1 // SPDX-License-Identifier: GPL-2.0+
   2 /*
   3  * Copyright 2016-2017 Google, Inc
   4  *
   5  * Fairchild FUSB302 Type-C Chip Driver
   6  */
   7
   8 #include <linux/debugfs.h>
   9 #include <linux/delay.h>
  10 #include <linux/errno.h>
  11 #include <linux/extcon.h>
  12 #include <linux/gpio/consumer.h>
  13 #include <linux/i2c.h>
  14 #include <linux/interrupt.h>
  15 #include <linux/kernel.h>
  16 #include <linux/module.h>
  17 #include <linux/mutex.h>
  18 #include <linux/of_device.h>
  19 #include <linux/pinctrl/consumer.h>
  20 #include <linux/proc_fs.h>
  21 #include <linux/regulator/consumer.h>
  22 #include <linux/sched/clock.h>
  23 #include <linux/seq_file.h>
  24 #include <linux/slab.h>
  25 #include <linux/spinlock.h>
  26 #include <linux/string.h>
  27 #include <linux/types.h>
  28 #include <linux/usb.h>
  29 #include <linux/usb/typec.h>
  30 #include <linux/usb/tcpm.h>
  31 #include <linux/usb/pd.h>
  32 #include <linux/workqueue.h>
  33
  34 #include "fusb302_reg.h"
  35
  36 /*
  37  * When the device is SNK, BC_LVL interrupt is used to monitor cc pins
  38  * for the current capability offered by the SRC. As FUSB302 chip fires
  39  * the BC_LVL interrupt on PD signalings, cc lvl should be handled after
  40  * a delay to avoid measuring on PD activities. The delay is slightly
  41  * longer than PD_T_PD_DEBPUNCE (10-20ms).
  42  */
  43 #define T_BC_LVL_DEBOUNCE_DELAY_MS 30
  44
  45 enum toggling_mode {
  46         TOGGLING_MODE_OFF,
  47         TOGGLING_MODE_DRP,
  48         TOGGLING_MODE_SNK,
  49         TOGGLING_MODE_SRC,
  50 };
  51
  52 enum src_current_status {
  53         SRC_CURRENT_DEFAULT,
  54         SRC_CURRENT_MEDIUM,
  55         SRC_CURRENT_HIGH,
  56 };
  57
  58 static const u8 ra_mda_value[] = {
  59         [SRC_CURRENT_DEFAULT] = 4,      /* 210mV */
  60         [SRC_CURRENT_MEDIUM] = 9,       /* 420mV */
  61         [SRC_CURRENT_HIGH] = 18,        /* 798mV */
  62 };
  63
  64 static const u8 rd_mda_value[] = {
  65         [SRC_CURRENT_DEFAULT] = 38,     /* 1638mV */
  66         [SRC_CURRENT_MEDIUM] = 38,      /* 1638mV */
  67         [SRC_CURRENT_HIGH] = 61,        /* 2604mV */
  68 };
  69
  70 #define LOG_BUFFER_ENTRIES      1024
  71 #define LOG_BUFFER_ENTRY_SIZE   128
  72
  73 struct fusb302_chip {
  74         struct device *dev;
  75         struct i2c_client *i2c_client;
  76         struct tcpm_port *tcpm_port;
  77         struct tcpc_dev tcpc_dev;
  78
  79         struct regulator *vbus;
  80
  81         spinlock_t irq_lock;
  82         struct work_struct irq_work;
  83         bool irq_suspended;
  84         bool irq_while_suspended;
  85         struct gpio_desc *gpio_int_n;
  86         int gpio_int_n_irq;
  87         struct extcon_dev *extcon;
  88
  89         struct workqueue_struct *wq;
  90         struct delayed_work bc_lvl_handler;
  91
  92         /* lock for sharing chip states */
  93         struct mutex lock;
  94
  95         /* chip status */
  96         enum toggling_mode toggling_mode;
  97         enum src_current_status src_current_status;
  98         bool intr_togdone;
  99         bool intr_bc_lvl;
 100         bool intr_comp_chng;
 101
 102         /* port status */
 103         bool vconn_on;
 104         bool vbus_on;
 105         bool charge_on;
 106         bool vbus_present;
 107         enum typec_cc_polarity cc_polarity;
 108         enum typec_cc_status cc1;
 109         enum typec_cc_status cc2;
 110         u32 snk_pdo[PDO_MAX_OBJECTS];
 111
 112 #ifdef CONFIG_DEBUG_FS
 113         struct dentry *dentry;
 114         /* lock for log buffer access */
 115         struct mutex logbuffer_lock;
 116         int logbuffer_head;
 117         int logbuffer_tail;
 118         u8 *logbuffer[LOG_BUFFER_ENTRIES];
 119 #endif
 120 };
 121
 122 /*
 123  * Logging
 124  */
 125
 126 #ifdef CONFIG_DEBUG_FS
 127 static bool fusb302_log_full(struct fusb302_chip *chip)
 128 {
 129         return chip->logbuffer_tail ==
 130                 (chip->logbuffer_head + 1) % LOG_BUFFER_ENTRIES;
 131 }
 132
 133 __printf(2, 0)
 134 static void _fusb302_log(struct fusb302_chip *chip, const char *fmt,
 135                          va_list args)
 136 {
 137         char tmpbuffer[LOG_BUFFER_ENTRY_SIZE];
 138         u64 ts_nsec = local_clock();
 139         unsigned long rem_nsec;
 140
 141         if (!chip->logbuffer[chip->logbuffer_head]) {
 142                 chip->logbuffer[chip->logbuffer_head] =
 143                                 kzalloc(LOG_BUFFER_ENTRY_SIZE, GFP_KERNEL);
 144                 if (!chip->logbuffer[chip->logbuffer_head])
 145                         return;
 146         }
 147
 148         vsnprintf(tmpbuffer, sizeof(tmpbuffer), fmt, args);
 149
 150         mutex_lock(&chip->logbuffer_lock);
 151
 152         if (fusb302_log_full(chip)) {
 153                 chip->logbuffer_head = max(chip->logbuffer_head - 1, 0);
 154                 strlcpy(tmpbuffer, "overflow", sizeof(tmpbuffer));
 155         }
 156
 157         if (chip->logbuffer_head < 0 ||
 158             chip->logbuffer_head >= LOG_BUFFER_ENTRIES) {
 159                 dev_warn(chip->dev,
 160                          "Bad log buffer index %d\n", chip->logbuffer_head);
 161                 goto abort;
 162         }
 163
 164         if (!chip->logbuffer[chip->logbuffer_head]) {
 165                 dev_warn(chip->dev,
 166                          "Log buffer index %d is NULL\n", chip->logbuffer_head);
 167                 goto abort;
 168         }
 169
 170         rem_nsec = do_div(ts_nsec, 1000000000);
 171         scnprintf(chip->logbuffer[chip->logbuffer_head],
 172                   LOG_BUFFER_ENTRY_SIZE, "[%5lu.%06lu] %s",
 173                   (unsigned long)ts_nsec, rem_nsec / 1000,
 174                   tmpbuffer);
 175         chip->logbuffer_head = (chip->logbuffer_head + 1) % LOG_BUFFER_ENTRIES;
 176
 177 abort:
 178         mutex_unlock(&chip->logbuffer_lock);
 179 }
 180
 181 __printf(2, 3)
 182 static void fusb302_log(struct fusb302_chip *chip, const char *fmt, ...)
 183 {
 184         va_list args;
 185
 186         va_start(args, fmt);
 187         _fusb302_log(chip, fmt, args);
 188         va_end(args);
 189 }
 190
 191 static int fusb302_debug_show(struct seq_file *s, void *v)
 192 {
 193         struct fusb302_chip *chip = (struct fusb302_chip *)s->private;
 194         int tail;
 195
 196         mutex_lock(&chip->logbuffer_lock);
 197         tail = chip->logbuffer_tail;
 198         while (tail != chip->logbuffer_head) {
 199                 seq_printf(s, "%s\n", chip->logbuffer[tail]);
 200                 tail = (tail + 1) % LOG_BUFFER_ENTRIES;
 201         }
 202         if (!seq_has_overflowed(s))
 203                 chip->logbuffer_tail = tail;
 204         mutex_unlock(&chip->logbuffer_lock);
 205
 206         return 0;
 207 }
 208 DEFINE_SHOW_ATTRIBUTE(fusb302_debug);
 209
 210 static void fusb302_debugfs_init(struct fusb302_chip *chip)
 211 {
 212         char name[NAME_MAX];
 213
 214         mutex_init(&chip->logbuffer_lock);
 215         snprintf(name, NAME_MAX, "fusb302-%s", dev_name(chip->dev));
 216         chip->dentry = debugfs_create_file(name, S_IFREG | 0444, usb_debug_root,
 217                                            chip, &fusb302_debug_fops);
 218 }
 219
 220 static void fusb302_debugfs_exit(struct fusb302_chip *chip)
 221 {
 222         debugfs_remove(chip->dentry);
 223 }
 224
 225 #else
 226
 227 static void fusb302_log(const struct fusb302_chip *chip,
 228                         const char *fmt, ...) { }
 229 static void fusb302_debugfs_init(const struct fusb302_chip *chip) { }
 230 static void fusb302_debugfs_exit(const struct fusb302_chip *chip) { }
 231
 232 #endif
 233
 234 static int fusb302_i2c_write(struct fusb302_chip *chip,
 235                              u8 address, u8 data)
 236 {
 237         int ret = 0;
 238
 239         ret = i2c_smbus_write_byte_data(chip->i2c_client, address, data);
 240         if (ret < 0)
 241                 fusb302_log(chip, "cannot write 0x%02x to 0x%02x, ret=%d",
 242                             data, address, ret);
 243
 244         return ret;
 245 }
 246
 247 static int fusb302_i2c_block_write(struct fusb302_chip *chip, u8 address,
 248                                    u8 length, const u8 *data)
 249 {
 250         int ret = 0;
 251
 252         if (length <= 0)
 253                 return ret;
 254
 255         ret = i2c_smbus_write_i2c_block_data(chip->i2c_client, address,
 256                                              length, data);
 257         if (ret < 0)
 258                 fusb302_log(chip, "cannot block write 0x%02x, len=%d, ret=%d",
 259                             address, length, ret);
 260
 261         return ret;
 262 }
 263
 264 static int fusb302_i2c_read(struct fusb302_chip *chip,
 265                             u8 address, u8 *data)
 266 {
 267         int ret = 0;
 268
 269         ret = i2c_smbus_read_byte_data(chip->i2c_client, address);
 270         *data = (u8)ret;
 271         if (ret < 0)
 272                 fusb302_log(chip, "cannot read %02x, ret=%d", address, ret);
 273
 274         return ret;
 275 }
 276
 277 static int fusb302_i2c_block_read(struct fusb302_chip *chip, u8 address,
 278                                   u8 length, u8 *data)
 279 {
 280         int ret = 0;
 281
 282         if (length <= 0)
 283                 return ret;
 284
 285         ret = i2c_smbus_read_i2c_block_data(chip->i2c_client, address,
 286                                             length, data);
 287         if (ret < 0) {
 288                 fusb302_log(chip, "cannot block read 0x%02x, len=%d, ret=%d",
 289                             address, length, ret);
 290                 goto done;
 291         }
 292         if (ret != length) {
 293                 fusb302_log(chip, "only read %d/%d bytes from 0x%02x",
 294                             ret, length, address);
 295                 ret = -EIO;
 296         }
 297
 298 done:
 299         return ret;
 300 }
 301
 302 static int fusb302_i2c_mask_write(struct fusb302_chip *chip, u8 address,
 303                                   u8 mask, u8 value)
 304 {
 305         int ret = 0;
 306         u8 data;
 307
 308         ret = fusb302_i2c_read(chip, address, &data);
 309         if (ret < 0)
 310                 return ret;
 311         data &= ~mask;
 312         data |= value;
 313         ret = fusb302_i2c_write(chip, address, data);
 314         if (ret < 0)
 315                 return ret;
 316
 317         return ret;
 318 }
 319
 320 static int fusb302_i2c_set_bits(struct fusb302_chip *chip, u8 address,
 321                                 u8 set_bits)
 322 {
 323         return fusb302_i2c_mask_write(chip, address, 0x00, set_bits);
 324 }
 325
 326 static int fusb302_i2c_clear_bits(struct fusb302_chip *chip, u8 address,
 327                                   u8 clear_bits)
 328 {
 329         return fusb302_i2c_mask_write(chip, address, clear_bits, 0x00);
 330 }
 331
 332 static int fusb302_sw_reset(struct fusb302_chip *chip)
 333 {
 334         int ret = 0;
 335
 336         ret = fusb302_i2c_write(chip, FUSB_REG_RESET,
 337                                 FUSB_REG_RESET_SW_RESET);
 338         if (ret < 0)
 339                 fusb302_log(chip, "cannot sw reset the chip, ret=%d", ret);
 340         else
 341                 fusb302_log(chip, "sw reset");
 342
 343         return ret;
 344 }
 345
 346 static int fusb302_enable_tx_auto_retries(struct fusb302_chip *chip)
 347 {
 348         int ret = 0;
 349
 350         ret = fusb302_i2c_set_bits(chip, FUSB_REG_CONTROL3,
 351                                    FUSB_REG_CONTROL3_N_RETRIES_3 |
 352                                    FUSB_REG_CONTROL3_AUTO_RETRY);
 353
 354         return ret;
 355 }
 356
 357 /*
 358  * initialize interrupt on the chip
 359  * - unmasked interrupt: VBUS_OK
 360  */
 361 static int fusb302_init_interrupt(struct fusb302_chip *chip)
 362 {
 363         int ret = 0;
 364
 365         ret = fusb302_i2c_write(chip, FUSB_REG_MASK,
 366                                 0xFF & ~FUSB_REG_MASK_VBUSOK);
 367         if (ret < 0)
 368                 return ret;
 369         ret = fusb302_i2c_write(chip, FUSB_REG_MASKA, 0xFF);
 370         if (ret < 0)
 371                 return ret;
 372         ret = fusb302_i2c_write(chip, FUSB_REG_MASKB, 0xFF);
 373         if (ret < 0)
 374                 return ret;
 375         ret = fusb302_i2c_clear_bits(chip, FUSB_REG_CONTROL0,
 376                                      FUSB_REG_CONTROL0_INT_MASK);
 377         if (ret < 0)
 378                 return ret;
 379
 380         return ret;
 381 }
 382
 383 static int fusb302_set_power_mode(struct fusb302_chip *chip, u8 power_mode)
 384 {
 385         int ret = 0;
 386
 387         ret = fusb302_i2c_write(chip, FUSB_REG_POWER, power_mode);
 388
 389         return ret;
 390 }
 391
 392 static int tcpm_init(struct tcpc_dev *dev)
 393 {
 394         struct fusb302_chip *chip = container_of(dev, struct fusb302_chip,
 395                                                  tcpc_dev);
 396         int ret = 0;
 397         u8 data;
 398
 399         ret = fusb302_sw_reset(chip);
 400         if (ret < 0)
 401                 return ret;
 402         ret = fusb302_enable_tx_auto_retries(chip);
 403         if (ret < 0)
 404                 return ret;
 405         ret = fusb302_init_interrupt(chip);
 406         if (ret < 0)
 407                 return ret;
 408         ret = fusb302_set_power_mode(chip, FUSB_REG_POWER_PWR_ALL);
 409         if (ret < 0)
 410                 return ret;
 411         ret = fusb302_i2c_read(chip, FUSB_REG_STATUS0, &data);
 412         if (ret < 0)
 413                 return ret;
 414         chip->vbus_present = !!(data & FUSB_REG_STATUS0_VBUSOK);
 415         ret = fusb302_i2c_read(chip, FUSB_REG_DEVICE_ID, &data);
 416         if (ret < 0)
 417                 return ret;
 418         fusb302_log(chip, "fusb302 device ID: 0x%02x", data);
 419
 420         return ret;
 421 }
 422
 423 static int tcpm_get_vbus(struct tcpc_dev *dev)
 424 {
 425         struct fusb302_chip *chip = container_of(dev, struct fusb302_chip,
 426                                                  tcpc_dev);
 427         int ret = 0;
 428
 429         mutex_lock(&chip->lock);
 430         ret = chip->vbus_present ? 1 : 0;
 431         mutex_unlock(&chip->lock);
 432
 433         return ret;
 434 }
 435
 436 static int tcpm_get_current_limit(struct tcpc_dev *dev)
 437 {
 438         struct fusb302_chip *chip = container_of(dev, struct fusb302_chip,
 439                                                  tcpc_dev);
 440         int current_limit = 0;
 441         unsigned long timeout;
 442
 443         if (!chip->extcon)
 444                 return 0;
 445
 446         /*
 447          * USB2 Charger detection may still be in progress when we get here,
 448          * this can take upto 600ms, wait 800ms max.
 449          */
 450         timeout = jiffies + msecs_to_jiffies(800);
 451         do {
 452                 if (extcon_get_state(chip->extcon, EXTCON_CHG_USB_SDP) == 1)
 453                         current_limit = 500;
 454
 455                 if (extcon_get_state(chip->extcon, EXTCON_CHG_USB_CDP) == 1 ||
 456                     extcon_get_state(chip->extcon, EXTCON_CHG_USB_ACA) == 1)
 457                         current_limit = 1500;
 458
 459                 if (extcon_get_state(chip->extcon, EXTCON_CHG_USB_DCP) == 1)
 460                         current_limit = 2000;
 461
 462                 msleep(50);
 463         } while (current_limit == 0 && time_before(jiffies, timeout));
 464
 465         return current_limit;
 466 }
 467
 468 static int fusb302_set_src_current(struct fusb302_chip *chip,
 469                                    enum src_current_status status)
 470 {
 471         int ret = 0;
 472
 473         chip->src_current_status = status;
 474         switch (status) {
 475         case SRC_CURRENT_DEFAULT:
 476                 ret = fusb302_i2c_mask_write(chip, FUSB_REG_CONTROL0,
 477                                              FUSB_REG_CONTROL0_HOST_CUR_MASK,
 478                                              FUSB_REG_CONTROL0_HOST_CUR_DEF);
 479                 break;
 480         case SRC_CURRENT_MEDIUM:
 481                 ret = fusb302_i2c_mask_write(chip, FUSB_REG_CONTROL0,
 482                                              FUSB_REG_CONTROL0_HOST_CUR_MASK,
 483                                              FUSB_REG_CONTROL0_HOST_CUR_MED);
 484                 break;
 485         case SRC_CURRENT_HIGH:
 486                 ret = fusb302_i2c_mask_write(chip, FUSB_REG_CONTROL0,
 487                                              FUSB_REG_CONTROL0_HOST_CUR_MASK,
 488                                              FUSB_REG_CONTROL0_HOST_CUR_HIGH);
 489                 break;
 490         default:
 491                 break;
 492         }
 493
 494         return ret;
 495 }
 496
 497 static int fusb302_set_toggling(struct fusb302_chip *chip,
 498                                 enum toggling_mode mode)
 499 {
 500         int ret = 0;
 501
 502         /* first disable toggling */
 503         ret = fusb302_i2c_clear_bits(chip, FUSB_REG_CONTROL2,
 504                                      FUSB_REG_CONTROL2_TOGGLE);
 505         if (ret < 0)
 506                 return ret;
 507         /* mask interrupts for SRC or SNK */
 508         ret = fusb302_i2c_set_bits(chip, FUSB_REG_MASK,
 509                                    FUSB_REG_MASK_BC_LVL |
 510                                    FUSB_REG_MASK_COMP_CHNG);
 511         if (ret < 0)
 512                 return ret;
 513         chip->intr_bc_lvl = false;
 514         chip->intr_comp_chng = false;
 515         /* configure toggling mode: none/snk/src/drp */
 516         switch (mode) {
 517         case TOGGLING_MODE_OFF:
 518                 ret = fusb302_i2c_mask_write(chip, FUSB_REG_CONTROL2,
 519                                              FUSB_REG_CONTROL2_MODE_MASK,
 520                                              FUSB_REG_CONTROL2_MODE_NONE);
 521                 if (ret < 0)
 522                         return ret;
 523                 break;
 524         case TOGGLING_MODE_SNK:
 525                 ret = fusb302_i2c_mask_write(chip, FUSB_REG_CONTROL2,
 526                                              FUSB_REG_CONTROL2_MODE_MASK,
 527                                              FUSB_REG_CONTROL2_MODE_UFP);
 528                 if (ret < 0)
 529                         return ret;
 530                 break;
 531         case TOGGLING_MODE_SRC:
 532                 ret = fusb302_i2c_mask_write(chip, FUSB_REG_CONTROL2,
 533                                              FUSB_REG_CONTROL2_MODE_MASK,
 534                                              FUSB_REG_CONTROL2_MODE_DFP);
 535                 if (ret < 0)
 536                         return ret;
 537                 break;
 538         case TOGGLING_MODE_DRP:
 539                 ret = fusb302_i2c_mask_write(chip, FUSB_REG_CONTROL2,
 540                                              FUSB_REG_CONTROL2_MODE_MASK,
 541                                              FUSB_REG_CONTROL2_MODE_DRP);
 542                 if (ret < 0)
 543                         return ret;
 544                 break;
 545         default:
 546                 break;
 547         }
 548
 549         if (mode == TOGGLING_MODE_OFF) {
 550                 /* mask TOGDONE interrupt */
 551                 ret = fusb302_i2c_set_bits(chip, FUSB_REG_MASKA,
 552                                            FUSB_REG_MASKA_TOGDONE);
 553                 if (ret < 0)
 554                         return ret;
 555                 chip->intr_togdone = false;
 556         } else {
 557                 /* Datasheet says vconn MUST be off when toggling */
 558                 WARN(chip->vconn_on, "Vconn is on during toggle start");
 559                 /* unmask TOGDONE interrupt */
 560                 ret = fusb302_i2c_clear_bits(chip, FUSB_REG_MASKA,
 561                                              FUSB_REG_MASKA_TOGDONE);
 562                 if (ret < 0)
 563                         return ret;
 564                 chip->intr_togdone = true;
 565                 /* start toggling */
 566                 ret = fusb302_i2c_set_bits(chip, FUSB_REG_CONTROL2,
 567                                            FUSB_REG_CONTROL2_TOGGLE);
 568                 if (ret < 0)
 569                         return ret;
 570                 /* during toggling, consider cc as Open */
 571                 chip->cc1 = TYPEC_CC_OPEN;
 572                 chip->cc2 = TYPEC_CC_OPEN;
 573         }
 574         chip->toggling_mode = mode;
 575
 576         return ret;
 577 }
 578
 579 static const char * const typec_cc_status_name[] = {
 580         [TYPEC_CC_OPEN]         = "Open",
 581         [TYPEC_CC_RA]           = "Ra",
 582         [TYPEC_CC_RD]           = "Rd",
 583         [TYPEC_CC_RP_DEF]       = "Rp-def",
 584         [TYPEC_CC_RP_1_5]       = "Rp-1.5",
 585         [TYPEC_CC_RP_3_0]       = "Rp-3.0",
 586 };
 587
 588 static const enum src_current_status cc_src_current[] = {
 589         [TYPEC_CC_OPEN]         = SRC_CURRENT_DEFAULT,
 590         [TYPEC_CC_RA]           = SRC_CURRENT_DEFAULT,
 591         [TYPEC_CC_RD]           = SRC_CURRENT_DEFAULT,
 592         [TYPEC_CC_RP_DEF]       = SRC_CURRENT_DEFAULT,
 593         [TYPEC_CC_RP_1_5]       = SRC_CURRENT_MEDIUM,
 594         [TYPEC_CC_RP_3_0]       = SRC_CURRENT_HIGH,
 595 };
 596
 597 static int tcpm_set_cc(struct tcpc_dev *dev, enum typec_cc_status cc)
 598 {
 599         struct fusb302_chip *chip = container_of(dev, struct fusb302_chip,
 600                                                  tcpc_dev);
 601         u8 switches0_mask = FUSB_REG_SWITCHES0_CC1_PU_EN |
 602                             FUSB_REG_SWITCHES0_CC2_PU_EN |
 603                             FUSB_REG_SWITCHES0_CC1_PD_EN |
 604                             FUSB_REG_SWITCHES0_CC2_PD_EN;
 605         u8 rd_mda, switches0_data = 0x00;
 606         int ret = 0;
 607
 608         mutex_lock(&chip->lock);
 609         switch (cc) {
 610         case TYPEC_CC_OPEN:
 611                 break;
 612         case TYPEC_CC_RD:
 613                 switches0_data |= FUSB_REG_SWITCHES0_CC1_PD_EN |
 614                                   FUSB_REG_SWITCHES0_CC2_PD_EN;
 615                 break;
 616         case TYPEC_CC_RP_DEF:
 617         case TYPEC_CC_RP_1_5:
 618         case TYPEC_CC_RP_3_0:
 619                 switches0_data |= (chip->cc_polarity == TYPEC_POLARITY_CC1) ?
 620                                   FUSB_REG_SWITCHES0_CC1_PU_EN :
 621                                   FUSB_REG_SWITCHES0_CC2_PU_EN;
 622                 break;
 623         default:
 624                 fusb302_log(chip, "unsupported cc value %s",
 625                             typec_cc_status_name[cc]);
 626                 ret = -EINVAL;
 627                 goto done;
 628         }
 629
 630         fusb302_log(chip, "cc := %s", typec_cc_status_name[cc]);
 631
 632         ret = fusb302_set_toggling(chip, TOGGLING_MODE_OFF);
 633         if (ret < 0) {
 634                 fusb302_log(chip, "cannot set toggling mode, ret=%d", ret);
 635                 goto done;
 636         }
 637
 638         ret = fusb302_i2c_mask_write(chip, FUSB_REG_SWITCHES0,
 639                                      switches0_mask, switches0_data);
 640         if (ret < 0) {
 641                 fusb302_log(chip, "cannot set pull-up/-down, ret = %d", ret);
 642                 goto done;
 643         }
 644         /* reset the cc status */
 645         chip->cc1 = TYPEC_CC_OPEN;
 646         chip->cc2 = TYPEC_CC_OPEN;
 647
 648         /* adjust current for SRC */
 649         ret = fusb302_set_src_current(chip, cc_src_current[cc]);
 650         if (ret < 0) {
 651                 fusb302_log(chip, "cannot set src current %s, ret=%d",
 652                             typec_cc_status_name[cc], ret);
 653                 goto done;
 654         }
 655
 656         /* enable/disable interrupts, BC_LVL for SNK and COMP_CHNG for SRC */
 657         switch (cc) {
 658         case TYPEC_CC_RP_DEF:
 659         case TYPEC_CC_RP_1_5:
 660         case TYPEC_CC_RP_3_0:
 661                 rd_mda = rd_mda_value[cc_src_current[cc]];
 662                 ret = fusb302_i2c_write(chip, FUSB_REG_MEASURE, rd_mda);
 663                 if (ret < 0) {
 664                         fusb302_log(chip,
 665                                     "cannot set SRC measure value, ret=%d",
 666                                     ret);
 667                         goto done;
 668                 }
 669                 ret = fusb302_i2c_mask_write(chip, FUSB_REG_MASK,
 670                                              FUSB_REG_MASK_BC_LVL |
 671                                              FUSB_REG_MASK_COMP_CHNG,
 672                                              FUSB_REG_MASK_COMP_CHNG);
 673                 if (ret < 0) {
 674                         fusb302_log(chip, "cannot set SRC interrupt, ret=%d",
 675                                     ret);
 676                         goto done;
 677                 }
 678                 chip->intr_comp_chng = true;
 679                 break;
 680         case TYPEC_CC_RD:
 681                 ret = fusb302_i2c_mask_write(chip, FUSB_REG_MASK,
 682                                              FUSB_REG_MASK_BC_LVL |
 683                                              FUSB_REG_MASK_COMP_CHNG,
 684                                              FUSB_REG_MASK_BC_LVL);
 685                 if (ret < 0) {
 686                         fusb302_log(chip, "cannot set SRC interrupt, ret=%d",
 687                                     ret);
 688                         goto done;
 689                 }
 690                 chip->intr_bc_lvl = true;
 691                 break;
 692         default:
 693                 break;
 694         }
 695 done:
 696         mutex_unlock(&chip->lock);
 697
 698         return ret;
 699 }
 700
 701 static int tcpm_get_cc(struct tcpc_dev *dev, enum typec_cc_status *cc1,
 702                        enum typec_cc_status *cc2)
 703 {
 704         struct fusb302_chip *chip = container_of(dev, struct fusb302_chip,
 705                                                  tcpc_dev);
 706
 707         mutex_lock(&chip->lock);
 708         *cc1 = chip->cc1;
 709         *cc2 = chip->cc2;
 710         fusb302_log(chip, "cc1=%s, cc2=%s", typec_cc_status_name[*cc1],
 711                     typec_cc_status_name[*cc2]);
 712         mutex_unlock(&chip->lock);
 713
 714         return 0;
 715 }
 716
 717 static int tcpm_set_polarity(struct tcpc_dev *dev,
 718                              enum typec_cc_polarity polarity)
 719 {
 720         return 0;
 721 }
 722
 723 static int tcpm_set_vconn(struct tcpc_dev *dev, bool on)
 724 {
 725         struct fusb302_chip *chip = container_of(dev, struct fusb302_chip,
 726                                                  tcpc_dev);
 727         int ret = 0;
 728         u8 switches0_data = 0x00;
 729         u8 switches0_mask = FUSB_REG_SWITCHES0_VCONN_CC1 |
 730                             FUSB_REG_SWITCHES0_VCONN_CC2;
 731
 732         mutex_lock(&chip->lock);
 733         if (chip->vconn_on == on) {
 734                 fusb302_log(chip, "vconn is already %s", on ? "On" : "Off");
 735                 goto done;
 736         }
 737         if (on) {
 738                 switches0_data = (chip->cc_polarity == TYPEC_POLARITY_CC1) ?
 739                                  FUSB_REG_SWITCHES0_VCONN_CC2 :
 740                                  FUSB_REG_SWITCHES0_VCONN_CC1;
 741         }
 742         ret = fusb302_i2c_mask_write(chip, FUSB_REG_SWITCHES0,
 743                                      switches0_mask, switches0_data);
 744         if (ret < 0)
 745                 goto done;
 746         chip->vconn_on = on;
 747         fusb302_log(chip, "vconn := %s", on ? "On" : "Off");
 748 done:
 749         mutex_unlock(&chip->lock);
 750
 751         return ret;
 752 }
 753
 754 static int tcpm_set_vbus(struct tcpc_dev *dev, bool on, bool charge)
 755 {
 756         struct fusb302_chip *chip = container_of(dev, struct fusb302_chip,
 757                                                  tcpc_dev);
 758         int ret = 0;
 759
 760         mutex_lock(&chip->lock);
 761         if (chip->vbus_on == on) {
 762                 fusb302_log(chip, "vbus is already %s", on ? "On" : "Off");
 763         } else {
 764                 if (on)
 765                         ret = regulator_enable(chip->vbus);
 766                 else
 767                         ret = regulator_disable(chip->vbus);
 768                 if (ret < 0) {
 769                         fusb302_log(chip, "cannot %s vbus regulator, ret=%d",
 770                                     on ? "enable" : "disable", ret);
 771                         goto done;
 772                 }
 773                 chip->vbus_on = on;
 774                 fusb302_log(chip, "vbus := %s", on ? "On" : "Off");
 775         }
 776         if (chip->charge_on == charge)
 777                 fusb302_log(chip, "charge is already %s",
 778                             charge ? "On" : "Off");
 779         else
 780                 chip->charge_on = charge;
 781
 782 done:
 783         mutex_unlock(&chip->lock);
 784
 785         return ret;
 786 }
 787
 788 static int fusb302_pd_tx_flush(struct fusb302_chip *chip)
 789 {
 790         return fusb302_i2c_set_bits(chip, FUSB_REG_CONTROL0,
 791                                     FUSB_REG_CONTROL0_TX_FLUSH);
 792 }
 793
 794 static int fusb302_pd_rx_flush(struct fusb302_chip *chip)
 795 {
 796         return fusb302_i2c_set_bits(chip, FUSB_REG_CONTROL1,
 797                                     FUSB_REG_CONTROL1_RX_FLUSH);
 798 }
 799
 800 static int fusb302_pd_set_auto_goodcrc(struct fusb302_chip *chip, bool on)
 801 {
 802         if (on)
 803                 return fusb302_i2c_set_bits(chip, FUSB_REG_SWITCHES1,
 804                                             FUSB_REG_SWITCHES1_AUTO_GCRC);
 805         return fusb302_i2c_clear_bits(chip, FUSB_REG_SWITCHES1,
 806                                             FUSB_REG_SWITCHES1_AUTO_GCRC);
 807 }
 808
 809 static int fusb302_pd_set_interrupts(struct fusb302_chip *chip, bool on)
 810 {
 811         int ret = 0;
 812         u8 mask_interrupts = FUSB_REG_MASK_COLLISION;
 813         u8 maska_interrupts = FUSB_REG_MASKA_RETRYFAIL |
 814                               FUSB_REG_MASKA_HARDSENT |
 815                               FUSB_REG_MASKA_TX_SUCCESS |
 816                               FUSB_REG_MASKA_HARDRESET;
 817         u8 maskb_interrupts = FUSB_REG_MASKB_GCRCSENT;
 818
 819         ret = on ?
 820                 fusb302_i2c_clear_bits(chip, FUSB_REG_MASK, mask_interrupts) :
 821                 fusb302_i2c_set_bits(chip, FUSB_REG_MASK, mask_interrupts);
 822         if (ret < 0)
 823                 return ret;
 824         ret = on ?
 825                 fusb302_i2c_clear_bits(chip, FUSB_REG_MASKA, maska_interrupts) :
 826                 fusb302_i2c_set_bits(chip, FUSB_REG_MASKA, maska_interrupts);
 827         if (ret < 0)
 828                 return ret;
 829         ret = on ?
 830                 fusb302_i2c_clear_bits(chip, FUSB_REG_MASKB, maskb_interrupts) :
 831                 fusb302_i2c_set_bits(chip, FUSB_REG_MASKB, maskb_interrupts);
 832         return ret;
 833 }
 834
 835 static int tcpm_set_pd_rx(struct tcpc_dev *dev, bool on)
 836 {
 837         struct fusb302_chip *chip = container_of(dev, struct fusb302_chip,
 838                                                  tcpc_dev);
 839         int ret = 0;
 840
 841         mutex_lock(&chip->lock);
 842         ret = fusb302_pd_rx_flush(chip);
 843         if (ret < 0) {
 844                 fusb302_log(chip, "cannot flush pd rx buffer, ret=%d", ret);
 845                 goto done;
 846         }
 847         ret = fusb302_pd_tx_flush(chip);
 848         if (ret < 0) {
 849                 fusb302_log(chip, "cannot flush pd tx buffer, ret=%d", ret);
 850                 goto done;
 851         }
 852         ret = fusb302_pd_set_auto_goodcrc(chip, on);
 853         if (ret < 0) {
 854                 fusb302_log(chip, "cannot turn %s auto GCRC, ret=%d",
 855                             on ? "on" : "off", ret);
 856                 goto done;
 857         }
 858         ret = fusb302_pd_set_interrupts(chip, on);
 859         if (ret < 0) {
 860                 fusb302_log(chip, "cannot turn %s pd interrupts, ret=%d",
 861                             on ? "on" : "off", ret);
 862                 goto done;
 863         }
 864         fusb302_log(chip, "pd := %s", on ? "on" : "off");
 865 done:
 866         mutex_unlock(&chip->lock);
 867
 868         return ret;
 869 }
 870
 871 static const char * const typec_role_name[] = {
 872         [TYPEC_SINK]            = "Sink",
 873         [TYPEC_SOURCE]          = "Source",
 874 };
 875
 876 static const char * const typec_data_role_name[] = {
 877         [TYPEC_DEVICE]          = "Device",
 878         [TYPEC_HOST]            = "Host",
 879 };
 880
 881 static int tcpm_set_roles(struct tcpc_dev *dev, bool attached,
 882                           enum typec_role pwr, enum typec_data_role data)
 883 {
 884         struct fusb302_chip *chip = container_of(dev, struct fusb302_chip,
 885                                                  tcpc_dev);
 886         int ret = 0;
 887         u8 switches1_mask = FUSB_REG_SWITCHES1_POWERROLE |
 888                             FUSB_REG_SWITCHES1_DATAROLE;
 889         u8 switches1_data = 0x00;
 890
 891         mutex_lock(&chip->lock);
 892         if (pwr == TYPEC_SOURCE)
 893                 switches1_data |= FUSB_REG_SWITCHES1_POWERROLE;
 894         if (data == TYPEC_HOST)
 895                 switches1_data |= FUSB_REG_SWITCHES1_DATAROLE;
 896         ret = fusb302_i2c_mask_write(chip, FUSB_REG_SWITCHES1,
 897                                      switches1_mask, switches1_data);
 898         if (ret < 0) {
 899                 fusb302_log(chip, "unable to set pd header %s, %s, ret=%d",
 900                             typec_role_name[pwr], typec_data_role_name[data],
 901                             ret);
 902                 goto done;
 903         }
 904         fusb302_log(chip, "pd header := %s, %s", typec_role_name[pwr],
 905                     typec_data_role_name[data]);
 906 done:
 907         mutex_unlock(&chip->lock);
 908
 909         return ret;
 910 }
 911
 912 static int tcpm_start_toggling(struct tcpc_dev *dev,
 913                                enum typec_port_type port_type,
 914                                enum typec_cc_status cc)
 915 {
 916         struct fusb302_chip *chip = container_of(dev, struct fusb302_chip,
 917                                                  tcpc_dev);
 918         enum toggling_mode mode = TOGGLING_MODE_OFF;
 919         int ret = 0;
 920
 921         switch (port_type) {
 922         case TYPEC_PORT_SRC:
 923                 mode = TOGGLING_MODE_SRC;
 924                 break;
 925         case TYPEC_PORT_SNK:
 926                 mode = TOGGLING_MODE_SNK;
 927                 break;
 928         case TYPEC_PORT_DRP:
 929                 mode = TOGGLING_MODE_DRP;
 930                 break;
 931         }
 932
 933         mutex_lock(&chip->lock);
 934         ret = fusb302_set_src_current(chip, cc_src_current[cc]);
 935         if (ret < 0) {
 936                 fusb302_log(chip, "unable to set src current %s, ret=%d",
 937                             typec_cc_status_name[cc], ret);
 938                 goto done;
 939         }
 940         ret = fusb302_set_toggling(chip, mode);
 941         if (ret < 0) {
 942                 fusb302_log(chip,
 943                             "unable to start drp toggling, ret=%d", ret);
 944                 goto done;
 945         }
 946         fusb302_log(chip, "start drp toggling");
 947 done:
 948         mutex_unlock(&chip->lock);
 949
 950         return ret;
 951 }
 952
 953 static int fusb302_pd_send_message(struct fusb302_chip *chip,
 954                                    const struct pd_message *msg)
 955 {
 956         int ret = 0;
 957         u8 buf[40];
 958         u8 pos = 0;
 959         int len;
 960
 961         /* SOP tokens */
 962         buf[pos++] = FUSB302_TKN_SYNC1;
 963         buf[pos++] = FUSB302_TKN_SYNC1;
 964         buf[pos++] = FUSB302_TKN_SYNC1;
 965         buf[pos++] = FUSB302_TKN_SYNC2;
 966
 967         len = pd_header_cnt_le(msg->header) * 4;
 968         /* plug 2 for header */
 969         len += 2;
 970         if (len > 0x1F) {
 971                 fusb302_log(chip,
 972                             "PD message too long %d (incl. header)", len);
 973                 return -EINVAL;
 974         }
 975         /* packsym tells the FUSB302 chip that the next X bytes are payload */
 976         buf[pos++] = FUSB302_TKN_PACKSYM | (len & 0x1F);
 977         memcpy(&buf[pos], &msg->header, sizeof(msg->header));
 978         pos += sizeof(msg->header);
 979
 980         len -= 2;
 981         memcpy(&buf[pos], msg->payload, len);
 982         pos += len;
 983
 984         /* CRC */
 985         buf[pos++] = FUSB302_TKN_JAMCRC;
 986         /* EOP */
 987         buf[pos++] = FUSB302_TKN_EOP;
 988         /* turn tx off after sending message */
 989         buf[pos++] = FUSB302_TKN_TXOFF;
 990         /* start transmission */
 991         buf[pos++] = FUSB302_TKN_TXON;
 992
 993         ret = fusb302_i2c_block_write(chip, FUSB_REG_FIFOS, pos, buf);
 994         if (ret < 0)
 995                 return ret;
 996         fusb302_log(chip, "sending PD message header: %x", msg->header);
 997         fusb302_log(chip, "sending PD message len: %d", len);
 998
 999         return ret;
1000 }
1001
1002 static int fusb302_pd_send_hardreset(struct fusb302_chip *chip)
1003 {
1004         return fusb302_i2c_set_bits(chip, FUSB_REG_CONTROL3,
1005                                     FUSB_REG_CONTROL3_SEND_HARDRESET);
1006 }
1007
1008 static const char * const transmit_type_name[] = {
1009         [TCPC_TX_SOP]                   = "SOP",
1010         [TCPC_TX_SOP_PRIME]             = "SOP'",
1011         [TCPC_TX_SOP_PRIME_PRIME]       = "SOP''",
1012         [TCPC_TX_SOP_DEBUG_PRIME]       = "DEBUG'",
1013         [TCPC_TX_SOP_DEBUG_PRIME_PRIME] = "DEBUG''",
1014         [TCPC_TX_HARD_RESET]            = "HARD_RESET",
1015         [TCPC_TX_CABLE_RESET]           = "CABLE_RESET",
1016         [TCPC_TX_BIST_MODE_2]           = "BIST_MODE_2",
1017 };
1018
1019 static int tcpm_pd_transmit(struct tcpc_dev *dev, enum tcpm_transmit_type type,
1020                             const struct pd_message *msg)
1021 {
1022         struct fusb302_chip *chip = container_of(dev, struct fusb302_chip,
1023                                                  tcpc_dev);
1024         int ret = 0;
1025
1026         mutex_lock(&chip->lock);
1027         switch (type) {
1028         case TCPC_TX_SOP:
1029                 ret = fusb302_pd_send_message(chip, msg);
1030                 if (ret < 0)
1031                         fusb302_log(chip,
1032                                     "cannot send PD message, ret=%d", ret);
1033                 break;
1034         case TCPC_TX_HARD_RESET:
1035                 ret = fusb302_pd_send_hardreset(chip);
1036                 if (ret < 0)
1037                         fusb302_log(chip,
1038                                     "cannot send hardreset, ret=%d", ret);
1039                 break;
1040         default:
1041                 fusb302_log(chip, "type %s not supported",
1042                             transmit_type_name[type]);
1043                 ret = -EINVAL;
1044         }
1045         mutex_unlock(&chip->lock);
1046
1047         return ret;
1048 }
1049
1050 static enum typec_cc_status fusb302_bc_lvl_to_cc(u8 bc_lvl)
1051 {
1052         if (bc_lvl == FUSB_REG_STATUS0_BC_LVL_1230_MAX)
1053                 return TYPEC_CC_RP_3_0;
1054         if (bc_lvl == FUSB_REG_STATUS0_BC_LVL_600_1230)
1055                 return TYPEC_CC_RP_1_5;
1056         if (bc_lvl == FUSB_REG_STATUS0_BC_LVL_200_600)
1057                 return TYPEC_CC_RP_DEF;
1058         return TYPEC_CC_OPEN;
1059 }
1060
1061 static void fusb302_bc_lvl_handler_work(struct work_struct *work)
1062 {
1063         struct fusb302_chip *chip = container_of(work, struct fusb302_chip,
1064                                                  bc_lvl_handler.work);
1065         int ret = 0;
1066         u8 status0;
1067         u8 bc_lvl;
1068         enum typec_cc_status cc_status;
1069
1070         mutex_lock(&chip->lock);
1071         if (!chip->intr_bc_lvl) {
1072                 fusb302_log(chip, "BC_LVL interrupt is turned off, abort");
1073                 goto done;
1074         }
1075         ret = fusb302_i2c_read(chip, FUSB_REG_STATUS0, &status0);
1076         if (ret < 0)
1077                 goto done;
1078         fusb302_log(chip, "BC_LVL handler, status0=0x%02x", status0);
1079         if (status0 & FUSB_REG_STATUS0_ACTIVITY) {
1080                 fusb302_log(chip, "CC activities detected, delay handling");
1081                 mod_delayed_work(chip->wq, &chip->bc_lvl_handler,
1082                                  msecs_to_jiffies(T_BC_LVL_DEBOUNCE_DELAY_MS));
1083                 goto done;
1084         }
1085         bc_lvl = status0 & FUSB_REG_STATUS0_BC_LVL_MASK;
1086         cc_status = fusb302_bc_lvl_to_cc(bc_lvl);
1087         if (chip->cc_polarity == TYPEC_POLARITY_CC1) {
1088                 if (chip->cc1 != cc_status) {
1089                         fusb302_log(chip, "cc1: %s -> %s",
1090                                     typec_cc_status_name[chip->cc1],
1091                                     typec_cc_status_name[cc_status]);
1092                         chip->cc1 = cc_status;
1093                         tcpm_cc_change(chip->tcpm_port);
1094                 }
1095         } else {
1096                 if (chip->cc2 != cc_status) {
1097                         fusb302_log(chip, "cc2: %s -> %s",
1098                                     typec_cc_status_name[chip->cc2],
1099                                     typec_cc_status_name[cc_status]);
1100                         chip->cc2 = cc_status;
1101                         tcpm_cc_change(chip->tcpm_port);
1102                 }
1103         }
1104
1105 done:
1106         mutex_unlock(&chip->lock);
1107 }
1108
1109 static void init_tcpc_dev(struct tcpc_dev *fusb302_tcpc_dev)
1110 {
1111         fusb302_tcpc_dev->init = tcpm_init;
1112         fusb302_tcpc_dev->get_vbus = tcpm_get_vbus;
1113         fusb302_tcpc_dev->get_current_limit = tcpm_get_current_limit;
1114         fusb302_tcpc_dev->set_cc = tcpm_set_cc;
1115         fusb302_tcpc_dev->get_cc = tcpm_get_cc;
1116         fusb302_tcpc_dev->set_polarity = tcpm_set_polarity;
1117         fusb302_tcpc_dev->set_vconn = tcpm_set_vconn;
1118         fusb302_tcpc_dev->set_vbus = tcpm_set_vbus;
1119         fusb302_tcpc_dev->set_pd_rx = tcpm_set_pd_rx;
1120         fusb302_tcpc_dev->set_roles = tcpm_set_roles;
1121         fusb302_tcpc_dev->start_toggling = tcpm_start_toggling;
1122         fusb302_tcpc_dev->pd_transmit = tcpm_pd_transmit;
1123 }
1124
1125 static const char * const cc_polarity_name[] = {
1126         [TYPEC_POLARITY_CC1]    = "Polarity_CC1",
1127         [TYPEC_POLARITY_CC2]    = "Polarity_CC2",
1128 };
1129
1130 static int fusb302_set_cc_polarity_and_pull(struct fusb302_chip *chip,
1131                                             enum typec_cc_polarity cc_polarity,
1132                                             bool pull_up, bool pull_down)
1133 {
1134         int ret = 0;
1135         u8 switches0_data = 0x00;
1136         u8 switches1_mask = FUSB_REG_SWITCHES1_TXCC1_EN |
1137                             FUSB_REG_SWITCHES1_TXCC2_EN;
1138         u8 switches1_data = 0x00;
1139
1140         if (pull_down)
1141                 switches0_data |= FUSB_REG_SWITCHES0_CC1_PD_EN |
1142                                   FUSB_REG_SWITCHES0_CC2_PD_EN;
1143
1144         if (cc_polarity == TYPEC_POLARITY_CC1) {
1145                 switches0_data |= FUSB_REG_SWITCHES0_MEAS_CC1;
1146                 if (chip->vconn_on)
1147                         switches0_data |= FUSB_REG_SWITCHES0_VCONN_CC2;
1148                 if (pull_up)
1149                         switches0_data |= FUSB_REG_SWITCHES0_CC1_PU_EN;
1150                 switches1_data = FUSB_REG_SWITCHES1_TXCC1_EN;
1151         } else {
1152                 switches0_data |= FUSB_REG_SWITCHES0_MEAS_CC2;
1153                 if (chip->vconn_on)
1154                         switches0_data |= FUSB_REG_SWITCHES0_VCONN_CC1;
1155                 if (pull_up)
1156                         switches0_data |= FUSB_REG_SWITCHES0_CC2_PU_EN;
1157                 switches1_data = FUSB_REG_SWITCHES1_TXCC2_EN;
1158         }
1159         ret = fusb302_i2c_write(chip, FUSB_REG_SWITCHES0, switches0_data);
1160         if (ret < 0)
1161                 return ret;
1162         ret = fusb302_i2c_mask_write(chip, FUSB_REG_SWITCHES1,
1163                                      switches1_mask, switches1_data);
1164         if (ret < 0)
1165                 return ret;
1166         chip->cc_polarity = cc_polarity;
1167
1168         return ret;
1169 }
1170
1171 static int fusb302_handle_togdone_snk(struct fusb302_chip *chip,
1172                                       u8 togdone_result)
1173 {
1174         int ret = 0;
1175         u8 status0;
1176         u8 bc_lvl;
1177         enum typec_cc_polarity cc_polarity;
1178         enum typec_cc_status cc_status_active, cc1, cc2;
1179
1180         /* set polarity and pull_up, pull_down */
1181         cc_polarity = (togdone_result == FUSB_REG_STATUS1A_TOGSS_SNK1) ?
1182                       TYPEC_POLARITY_CC1 : TYPEC_POLARITY_CC2;
1183         ret = fusb302_set_cc_polarity_and_pull(chip, cc_polarity, false, true);
1184         if (ret < 0) {
1185                 fusb302_log(chip, "cannot set cc polarity %s, ret=%d",
1186                             cc_polarity_name[cc_polarity], ret);
1187                 return ret;
1188         }
1189         /* fusb302_set_cc_polarity() has set the correct measure block */
1190         ret = fusb302_i2c_read(chip, FUSB_REG_STATUS0, &status0);
1191         if (ret < 0)
1192                 return ret;
1193         bc_lvl = status0 & FUSB_REG_STATUS0_BC_LVL_MASK;
1194         cc_status_active = fusb302_bc_lvl_to_cc(bc_lvl);
1195         /* restart toggling if the cc status on the active line is OPEN */
1196         if (cc_status_active == TYPEC_CC_OPEN) {
1197                 fusb302_log(chip, "restart toggling as CC_OPEN detected");
1198                 ret = fusb302_set_toggling(chip, chip->toggling_mode);
1199                 return ret;
1200         }
1201         /* update tcpm with the new cc value */
1202         cc1 = (cc_polarity == TYPEC_POLARITY_CC1) ?
1203               cc_status_active : TYPEC_CC_OPEN;
1204         cc2 = (cc_polarity == TYPEC_POLARITY_CC2) ?
1205               cc_status_active : TYPEC_CC_OPEN;
1206         if ((chip->cc1 != cc1) || (chip->cc2 != cc2)) {
1207                 chip->cc1 = cc1;
1208                 chip->cc2 = cc2;
1209                 tcpm_cc_change(chip->tcpm_port);
1210         }
1211         /* turn off toggling */
1212         ret = fusb302_set_toggling(chip, TOGGLING_MODE_OFF);
1213         if (ret < 0) {
1214                 fusb302_log(chip,
1215                             "cannot set toggling mode off, ret=%d", ret);
1216                 return ret;
1217         }
1218         /* unmask bc_lvl interrupt */
1219         ret = fusb302_i2c_clear_bits(chip, FUSB_REG_MASK, FUSB_REG_MASK_BC_LVL);
1220         if (ret < 0) {
1221                 fusb302_log(chip,
1222                             "cannot unmask bc_lcl interrupt, ret=%d", ret);
1223                 return ret;
1224         }
1225         chip->intr_bc_lvl = true;
1226         fusb302_log(chip, "detected cc1=%s, cc2=%s",
1227                     typec_cc_status_name[cc1],
1228                     typec_cc_status_name[cc2]);
1229
1230         return ret;
1231 }
1232
1233 /* On error returns < 0, otherwise a typec_cc_status value */
1234 static int fusb302_get_src_cc_status(struct fusb302_chip *chip,
1235                                      enum typec_cc_polarity cc_polarity,
1236                                      enum typec_cc_status *cc)
1237 {
1238         u8 ra_mda = ra_mda_value[chip->src_current_status];
1239         u8 rd_mda = rd_mda_value[chip->src_current_status];
1240         u8 switches0_data, status0;
1241         int ret;
1242
1243         /* Step 1: Set switches so that we measure the right CC pin */
1244         switches0_data = (cc_polarity == TYPEC_POLARITY_CC1) ?
1245                 FUSB_REG_SWITCHES0_CC1_PU_EN | FUSB_REG_SWITCHES0_MEAS_CC1 :
1246                 FUSB_REG_SWITCHES0_CC2_PU_EN | FUSB_REG_SWITCHES0_MEAS_CC2;
1247         ret = fusb302_i2c_write(chip, FUSB_REG_SWITCHES0, switches0_data);
1248         if (ret < 0)
1249                 return ret;
1250
1251         fusb302_i2c_read(chip, FUSB_REG_SWITCHES0, &status0);
1252         fusb302_log(chip, "get_src_cc_status switches: 0x%0x", status0);
1253
1254         /* Step 2: Set compararator volt to differentiate between Open and Rd */
1255         ret = fusb302_i2c_write(chip, FUSB_REG_MEASURE, rd_mda);
1256         if (ret < 0)
1257                 return ret;
1258
1259         usleep_range(50, 100);
1260         ret = fusb302_i2c_read(chip, FUSB_REG_STATUS0, &status0);
1261         if (ret < 0)
1262                 return ret;
1263
1264         fusb302_log(chip, "get_src_cc_status rd_mda status0: 0x%0x", status0);
1265         if (status0 & FUSB_REG_STATUS0_COMP) {
1266                 *cc = TYPEC_CC_OPEN;
1267                 return 0;
1268         }
1269
1270         /* Step 3: Set compararator input to differentiate between Rd and Ra. */
1271         ret = fusb302_i2c_write(chip, FUSB_REG_MEASURE, ra_mda);
1272         if (ret < 0)
1273                 return ret;
1274
1275         usleep_range(50, 100);
1276         ret = fusb302_i2c_read(chip, FUSB_REG_STATUS0, &status0);
1277         if (ret < 0)
1278                 return ret;
1279
1280         fusb302_log(chip, "get_src_cc_status ra_mda status0: 0x%0x", status0);
1281         if (status0 & FUSB_REG_STATUS0_COMP)
1282                 *cc = TYPEC_CC_RD;
1283         else
1284                 *cc = TYPEC_CC_RA;
1285
1286         return 0;
1287 }
1288
1289 static int fusb302_handle_togdone_src(struct fusb302_chip *chip,
1290                                       u8 togdone_result)
1291 {
1292         /*
1293          * - set polarity (measure cc, vconn, tx)
1294          * - set pull_up, pull_down
1295          * - set cc1, cc2, and update to tcpm_port
1296          * - set I_COMP interrupt on
1297          */
1298         int ret = 0;
1299         u8 rd_mda = rd_mda_value[chip->src_current_status];
1300         enum toggling_mode toggling_mode = chip->toggling_mode;
1301         enum typec_cc_polarity cc_polarity;
1302         enum typec_cc_status cc1, cc2;
1303
1304         /*
1305          * The toggle-engine will stop in a src state if it sees either Ra or
1306          * Rd. Determine the status for both CC pins, starting with the one
1307          * where toggling stopped, as that is where the switches point now.
1308          */
1309         if (togdone_result == FUSB_REG_STATUS1A_TOGSS_SRC1)
1310                 ret = fusb302_get_src_cc_status(chip, TYPEC_POLARITY_CC1, &cc1);
1311         else
1312                 ret = fusb302_get_src_cc_status(chip, TYPEC_POLARITY_CC2, &cc2);
1313         if (ret < 0)
1314                 return ret;
1315         /* we must turn off toggling before we can measure the other pin */
1316         ret = fusb302_set_toggling(chip, TOGGLING_MODE_OFF);
1317         if (ret < 0) {
1318                 fusb302_log(chip, "cannot set toggling mode off, ret=%d", ret);
1319                 return ret;
1320         }
1321         /* get the status of the other pin */
1322         if (togdone_result == FUSB_REG_STATUS1A_TOGSS_SRC1)
1323                 ret = fusb302_get_src_cc_status(chip, TYPEC_POLARITY_CC2, &cc2);
1324         else
1325                 ret = fusb302_get_src_cc_status(chip, TYPEC_POLARITY_CC1, &cc1);
1326         if (ret < 0)
1327                 return ret;
1328
1329         /* determine polarity based on the status of both pins */
1330         if (cc1 == TYPEC_CC_RD &&
1331                         (cc2 == TYPEC_CC_OPEN || cc2 == TYPEC_CC_RA)) {
1332                 cc_polarity = TYPEC_POLARITY_CC1;
1333         } else if (cc2 == TYPEC_CC_RD &&
1334                     (cc1 == TYPEC_CC_OPEN || cc1 == TYPEC_CC_RA)) {
1335                 cc_polarity = TYPEC_POLARITY_CC2;
1336         } else {
1337                 fusb302_log(chip, "unexpected CC status cc1=%s, cc2=%s, restarting toggling",
1338                             typec_cc_status_name[cc1],
1339                             typec_cc_status_name[cc2]);
1340                 return fusb302_set_toggling(chip, toggling_mode);
1341         }
1342         /* set polarity and pull_up, pull_down */
1343         ret = fusb302_set_cc_polarity_and_pull(chip, cc_polarity, true, false);
1344         if (ret < 0) {
1345                 fusb302_log(chip, "cannot set cc polarity %s, ret=%d",
1346                             cc_polarity_name[cc_polarity], ret);
1347                 return ret;
1348         }
1349         /* update tcpm with the new cc value */
1350         if ((chip->cc1 != cc1) || (chip->cc2 != cc2)) {
1351                 chip->cc1 = cc1;
1352                 chip->cc2 = cc2;
1353                 tcpm_cc_change(chip->tcpm_port);
1354         }
1355         /* set MDAC to Rd threshold, and unmask I_COMP for unplug detection */
1356         ret = fusb302_i2c_write(chip, FUSB_REG_MEASURE, rd_mda);
1357         if (ret < 0)
1358                 return ret;
1359         /* unmask comp_chng interrupt */
1360         ret = fusb302_i2c_clear_bits(chip, FUSB_REG_MASK,
1361                                      FUSB_REG_MASK_COMP_CHNG);
1362         if (ret < 0) {
1363                 fusb302_log(chip,
1364                             "cannot unmask comp_chng interrupt, ret=%d", ret);
1365                 return ret;
1366         }
1367         chip->intr_comp_chng = true;
1368         fusb302_log(chip, "detected cc1=%s, cc2=%s",
1369                     typec_cc_status_name[cc1],
1370                     typec_cc_status_name[cc2]);
1371
1372         return ret;
1373 }
1374
1375 static int fusb302_handle_togdone(struct fusb302_chip *chip)
1376 {
1377         int ret = 0;
1378         u8 status1a;
1379         u8 togdone_result;
1380
1381         ret = fusb302_i2c_read(chip, FUSB_REG_STATUS1A, &status1a);
1382         if (ret < 0)
1383                 return ret;
1384         togdone_result = (status1a >> FUSB_REG_STATUS1A_TOGSS_POS) &
1385                          FUSB_REG_STATUS1A_TOGSS_MASK;
1386         switch (togdone_result) {
1387         case FUSB_REG_STATUS1A_TOGSS_SNK1:
1388         case FUSB_REG_STATUS1A_TOGSS_SNK2:
1389                 return fusb302_handle_togdone_snk(chip, togdone_result);
1390         case FUSB_REG_STATUS1A_TOGSS_SRC1:
1391         case FUSB_REG_STATUS1A_TOGSS_SRC2:
1392                 return fusb302_handle_togdone_src(chip, togdone_result);
1393         case FUSB_REG_STATUS1A_TOGSS_AA:
1394                 /* doesn't support */
1395                 fusb302_log(chip, "AudioAccessory not supported");
1396                 fusb302_set_toggling(chip, chip->toggling_mode);
1397                 break;
1398         default:
1399                 fusb302_log(chip, "TOGDONE with an invalid state: %d",
1400                             togdone_result);
1401                 fusb302_set_toggling(chip, chip->toggling_mode);
1402                 break;
1403         }
1404         return ret;
1405 }
1406
1407 static int fusb302_pd_reset(struct fusb302_chip *chip)
1408 {
1409         return fusb302_i2c_set_bits(chip, FUSB_REG_RESET,
1410                                     FUSB_REG_RESET_PD_RESET);
1411 }
1412
1413 static int fusb302_pd_read_message(struct fusb302_chip *chip,
1414                                    struct pd_message *msg)
1415 {
1416         int ret = 0;
1417         u8 token;
1418         u8 crc[4];
1419         int len;
1420
1421         /* first SOP token */
1422         ret = fusb302_i2c_read(chip, FUSB_REG_FIFOS, &token);
1423         if (ret < 0)
1424                 return ret;
1425         ret = fusb302_i2c_block_read(chip, FUSB_REG_FIFOS, 2,
1426                                      (u8 *)&msg->header);
1427         if (ret < 0)
1428                 return ret;
1429         len = pd_header_cnt_le(msg->header) * 4;
1430         /* add 4 to length to include the CRC */
1431         if (len > PD_MAX_PAYLOAD * 4) {
1432                 fusb302_log(chip, "PD message too long %d", len);
1433                 return -EINVAL;
1434         }
1435         if (len > 0) {
1436                 ret = fusb302_i2c_block_read(chip, FUSB_REG_FIFOS, len,
1437                                              (u8 *)msg->payload);
1438                 if (ret < 0)
1439                         return ret;
1440         }
1441         /* another 4 bytes to read CRC out */
1442         ret = fusb302_i2c_block_read(chip, FUSB_REG_FIFOS, 4, crc);
1443         if (ret < 0)
1444                 return ret;
1445         fusb302_log(chip, "PD message header: %x", msg->header);
1446         fusb302_log(chip, "PD message len: %d", len);
1447
1448         /*
1449          * Check if we've read off a GoodCRC message. If so then indicate to
1450          * TCPM that the previous transmission has completed. Otherwise we pass
1451          * the received message over to TCPM for processing.
1452          *
1453          * We make this check here instead of basing the reporting decision on
1454          * the IRQ event type, as it's possible for the chip to report the
1455          * TX_SUCCESS and GCRCSENT events out of order on occasion, so we need
1456          * to check the message type to ensure correct reporting to TCPM.
1457          */
1458         if ((!len) && (pd_header_type_le(msg->header) == PD_CTRL_GOOD_CRC))
1459                 tcpm_pd_transmit_complete(chip->tcpm_port, TCPC_TX_SUCCESS);
1460         else
1461                 tcpm_pd_receive(chip->tcpm_port, msg);
1462
1463         return ret;
1464 }
1465
1466 static irqreturn_t fusb302_irq_intn(int irq, void *dev_id)
1467 {
1468         struct fusb302_chip *chip = dev_id;
1469         unsigned long flags;
1470
1471         /* Disable our level triggered IRQ until our irq_work has cleared it */
1472         disable_irq_nosync(chip->gpio_int_n_irq);
1473
1474         spin_lock_irqsave(&chip->irq_lock, flags);
1475         if (chip->irq_suspended)
1476                 chip->irq_while_suspended = true;
1477         else
1478                 schedule_work(&chip->irq_work);
1479         spin_unlock_irqrestore(&chip->irq_lock, flags);
1480
1481         return IRQ_HANDLED;
1482 }
1483
1484 static void fusb302_irq_work(struct work_struct *work)
1485 {
1486         struct fusb302_chip *chip = container_of(work, struct fusb302_chip,
1487                                                  irq_work);
1488         int ret = 0;
1489         u8 interrupt;
1490         u8 interrupta;
1491         u8 interruptb;
1492         u8 status0;
1493         bool vbus_present;
1494         bool comp_result;
1495         bool intr_togdone;
1496         bool intr_bc_lvl;
1497         bool intr_comp_chng;
1498         struct pd_message pd_msg;
1499
1500         mutex_lock(&chip->lock);
1501         /* grab a snapshot of intr flags */
1502         intr_togdone = chip->intr_togdone;
1503         intr_bc_lvl = chip->intr_bc_lvl;
1504         intr_comp_chng = chip->intr_comp_chng;
1505
1506         ret = fusb302_i2c_read(chip, FUSB_REG_INTERRUPT, &interrupt);
1507         if (ret < 0)
1508                 goto done;
1509         ret = fusb302_i2c_read(chip, FUSB_REG_INTERRUPTA, &interrupta);
1510         if (ret < 0)
1511                 goto done;
1512         ret = fusb302_i2c_read(chip, FUSB_REG_INTERRUPTB, &interruptb);
1513         if (ret < 0)
1514                 goto done;
1515         ret = fusb302_i2c_read(chip, FUSB_REG_STATUS0, &status0);
1516         if (ret < 0)
1517                 goto done;
1518         fusb302_log(chip,
1519                     "IRQ: 0x%02x, a: 0x%02x, b: 0x%02x, status0: 0x%02x",
1520                     interrupt, interrupta, interruptb, status0);
1521
1522         if (interrupt & FUSB_REG_INTERRUPT_VBUSOK) {
1523                 vbus_present = !!(status0 & FUSB_REG_STATUS0_VBUSOK);
1524                 fusb302_log(chip, "IRQ: VBUS_OK, vbus=%s",
1525                             vbus_present ? "On" : "Off");
1526                 if (vbus_present != chip->vbus_present) {
1527                         chip->vbus_present = vbus_present;
1528                         tcpm_vbus_change(chip->tcpm_port);
1529                 }
1530         }
1531
1532         if ((interrupta & FUSB_REG_INTERRUPTA_TOGDONE) && intr_togdone) {
1533                 fusb302_log(chip, "IRQ: TOGDONE");
1534                 ret = fusb302_handle_togdone(chip);
1535                 if (ret < 0) {
1536                         fusb302_log(chip,
1537                                     "handle togdone error, ret=%d", ret);
1538                         goto done;
1539                 }
1540         }
1541
1542         if ((interrupt & FUSB_REG_INTERRUPT_BC_LVL) && intr_bc_lvl) {
1543                 fusb302_log(chip, "IRQ: BC_LVL, handler pending");
1544                 /*
1545                  * as BC_LVL interrupt can be affected by PD activity,
1546                  * apply delay to for the handler to wait for the PD
1547                  * signaling to finish.
1548                  */
1549                 mod_delayed_work(chip->wq, &chip->bc_lvl_handler,
1550                                  msecs_to_jiffies(T_BC_LVL_DEBOUNCE_DELAY_MS));
1551         }
1552
1553         if ((interrupt & FUSB_REG_INTERRUPT_COMP_CHNG) && intr_comp_chng) {
1554                 comp_result = !!(status0 & FUSB_REG_STATUS0_COMP);
1555                 fusb302_log(chip, "IRQ: COMP_CHNG, comp=%s",
1556                             comp_result ? "true" : "false");
1557                 if (comp_result) {
1558                         /* cc level > Rd_threshold, detach */
1559                         chip->cc1 = TYPEC_CC_OPEN;
1560                         chip->cc2 = TYPEC_CC_OPEN;
1561                         tcpm_cc_change(chip->tcpm_port);
1562                 }
1563         }
1564
1565         if (interrupt & FUSB_REG_INTERRUPT_COLLISION) {
1566                 fusb302_log(chip, "IRQ: PD collision");
1567                 tcpm_pd_transmit_complete(chip->tcpm_port, TCPC_TX_FAILED);
1568         }
1569
1570         if (interrupta & FUSB_REG_INTERRUPTA_RETRYFAIL) {
1571                 fusb302_log(chip, "IRQ: PD retry failed");
1572                 tcpm_pd_transmit_complete(chip->tcpm_port, TCPC_TX_FAILED);
1573         }
1574
1575         if (interrupta & FUSB_REG_INTERRUPTA_HARDSENT) {
1576                 fusb302_log(chip, "IRQ: PD hardreset sent");
1577                 ret = fusb302_pd_reset(chip);
1578                 if (ret < 0) {
1579                         fusb302_log(chip, "cannot PD reset, ret=%d", ret);
1580                         goto done;
1581                 }
1582                 tcpm_pd_transmit_complete(chip->tcpm_port, TCPC_TX_SUCCESS);
1583         }
1584
1585         if (interrupta & FUSB_REG_INTERRUPTA_TX_SUCCESS) {
1586                 fusb302_log(chip, "IRQ: PD tx success");
1587                 ret = fusb302_pd_read_message(chip, &pd_msg);
1588                 if (ret < 0) {
1589                         fusb302_log(chip,
1590                                     "cannot read in PD message, ret=%d", ret);
1591                         goto done;
1592                 }
1593         }
1594
1595         if (interrupta & FUSB_REG_INTERRUPTA_HARDRESET) {
1596                 fusb302_log(chip, "IRQ: PD received hardreset");
1597                 ret = fusb302_pd_reset(chip);
1598                 if (ret < 0) {
1599                         fusb302_log(chip, "cannot PD reset, ret=%d", ret);
1600                         goto done;
1601                 }
1602                 tcpm_pd_hard_reset(chip->tcpm_port);
1603         }
1604
1605         if (interruptb & FUSB_REG_INTERRUPTB_GCRCSENT) {
1606                 fusb302_log(chip, "IRQ: PD sent good CRC");
1607                 ret = fusb302_pd_read_message(chip, &pd_msg);
1608                 if (ret < 0) {
1609                         fusb302_log(chip,
1610                                     "cannot read in PD message, ret=%d", ret);
1611                         goto done;
1612                 }
1613         }
1614 done:
1615         mutex_unlock(&chip->lock);
1616         enable_irq(chip->gpio_int_n_irq);
1617 }
1618
1619 static int init_gpio(struct fusb302_chip *chip)
1620 {
1621         struct device *dev = chip->dev;
1622         int ret = 0;
1623
1624         chip->gpio_int_n = devm_gpiod_get(dev, "fcs,int_n", GPIOD_IN);
1625         if (IS_ERR(chip->gpio_int_n)) {
1626                 dev_err(dev, "failed to request gpio_int_n\n");
1627                 return PTR_ERR(chip->gpio_int_n);
1628         }
1629         ret = gpiod_to_irq(chip->gpio_int_n);
1630         if (ret < 0) {
1631                 dev_err(dev,
1632                         "cannot request IRQ for GPIO Int_N, ret=%d", ret);
1633                 return ret;
1634         }
1635         chip->gpio_int_n_irq = ret;
1636         return 0;
1637 }
1638
1639 #define PDO_FIXED_FLAGS \
1640         (PDO_FIXED_DUAL_ROLE | PDO_FIXED_DATA_SWAP | PDO_FIXED_USB_COMM)
1641
1642 static const u32 src_pdo[] = {
1643         PDO_FIXED(5000, 400, PDO_FIXED_FLAGS)
1644 };
1645
1646 static const u32 snk_pdo[] = {
1647         PDO_FIXED(5000, 400, PDO_FIXED_FLAGS)
1648 };
1649
1650 static const struct property_entry port_props[] = {
1651         PROPERTY_ENTRY_STRING("data-role", "dual"),
1652         PROPERTY_ENTRY_STRING("power-role", "dual"),
1653         PROPERTY_ENTRY_STRING("try-power-role", "sink"),
1654         PROPERTY_ENTRY_U32_ARRAY("source-pdos", src_pdo),
1655         PROPERTY_ENTRY_U32_ARRAY("sink-pdos", snk_pdo),
1656         PROPERTY_ENTRY_U32("op-sink-microwatt", 2500000),
1657         { }
1658 };
1659
1660 static struct fwnode_handle *fusb302_fwnode_get(struct device *dev)
1661 {
1662         struct fwnode_handle *fwnode;
1663
1664         fwnode = device_get_named_child_node(dev, "connector");
1665         if (!fwnode)
1666                 fwnode = fwnode_create_software_node(port_props, NULL);
1667
1668         return fwnode;
1669 }
1670
1671 static int fusb302_probe(struct i2c_client *client,
1672                          const struct i2c_device_id *id)
1673 {
1674         struct fusb302_chip *chip;
1675         struct i2c_adapter *adapter = client->adapter;
1676         struct device *dev = &client->dev;
1677         const char *name;
1678         int ret = 0;
1679
1680         if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_I2C_BLOCK)) {
1681                 dev_err(&client->dev,
1682                         "I2C/SMBus block functionality not supported!\n");
1683                 return -ENODEV;
1684         }
1685         chip = devm_kzalloc(&client->dev, sizeof(*chip), GFP_KERNEL);
1686         if (!chip)
1687                 return -ENOMEM;
1688
1689         chip->i2c_client = client;
1690         chip->dev = &client->dev;
1691         mutex_init(&chip->lock);
1692
1693         /*
1694          * Devicetree platforms should get extcon via phandle (not yet
1695          * supported). On ACPI platforms, we get the name from a device prop.
1696          * This device prop is for kernel internal use only and is expected
1697          * to be set by the platform code which also registers the i2c client
1698          * for the fusb302.
1699          */
1700         if (device_property_read_string(dev, "linux,extcon-name", &name) == 0) {
1701                 chip->extcon = extcon_get_extcon_dev(name);
1702                 if (!chip->extcon)
1703                         return -EPROBE_DEFER;
1704         }
1705
1706         chip->vbus = devm_regulator_get(chip->dev, "vbus");
1707         if (IS_ERR(chip->vbus))
1708                 return PTR_ERR(chip->vbus);
1709
1710         chip->wq = create_singlethread_workqueue(dev_name(chip->dev));
1711         if (!chip->wq)
1712                 return -ENOMEM;
1713
1714         spin_lock_init(&chip->irq_lock);
1715         INIT_WORK(&chip->irq_work, fusb302_irq_work);
1716         INIT_DELAYED_WORK(&chip->bc_lvl_handler, fusb302_bc_lvl_handler_work);
1717         init_tcpc_dev(&chip->tcpc_dev);
1718         fusb302_debugfs_init(chip);
1719
1720         if (client->irq) {
1721                 chip->gpio_int_n_irq = client->irq;
1722         } else {
1723                 ret = init_gpio(chip);
1724                 if (ret < 0)
1725                         goto destroy_workqueue;
1726         }
1727
1728         chip->tcpc_dev.fwnode = fusb302_fwnode_get(dev);
1729         if (IS_ERR(chip->tcpc_dev.fwnode)) {
1730                 ret = PTR_ERR(chip->tcpc_dev.fwnode);
1731                 goto destroy_workqueue;
1732         }
1733
1734         chip->tcpm_port = tcpm_register_port(&client->dev, &chip->tcpc_dev);
1735         if (IS_ERR(chip->tcpm_port)) {
1736                 fwnode_handle_put(chip->tcpc_dev.fwnode);
1737                 ret = PTR_ERR(chip->tcpm_port);
1738                 if (ret != -EPROBE_DEFER)
1739                         dev_err(dev, "cannot register tcpm port, ret=%d", ret);
1740                 goto destroy_workqueue;
1741         }
1742
1743         ret = request_irq(chip->gpio_int_n_irq, fusb302_irq_intn,
1744                           IRQF_ONESHOT | IRQF_TRIGGER_LOW,
1745                           "fsc_interrupt_int_n", chip);
1746         if (ret < 0) {
1747                 dev_err(dev, "cannot request IRQ for GPIO Int_N, ret=%d", ret);
1748                 goto tcpm_unregister_port;
1749         }
1750         enable_irq_wake(chip->gpio_int_n_irq);
1751         i2c_set_clientdata(client, chip);
1752
1753         return ret;
1754
1755 tcpm_unregister_port:
1756         tcpm_unregister_port(chip->tcpm_port);
1757         fwnode_handle_put(chip->tcpc_dev.fwnode);
1758 destroy_workqueue:
1759         fusb302_debugfs_exit(chip);
1760         destroy_workqueue(chip->wq);
1761
1762         return ret;
1763 }
1764
1765 static int fusb302_remove(struct i2c_client *client)
1766 {
1767         struct fusb302_chip *chip = i2c_get_clientdata(client);
1768
1769         disable_irq_wake(chip->gpio_int_n_irq);
1770         free_irq(chip->gpio_int_n_irq, chip);
1771         cancel_work_sync(&chip->irq_work);
1772         cancel_delayed_work_sync(&chip->bc_lvl_handler);
1773         tcpm_unregister_port(chip->tcpm_port);
1774         fwnode_handle_put(chip->tcpc_dev.fwnode);
1775         destroy_workqueue(chip->wq);
1776         fusb302_debugfs_exit(chip);
1777
1778         return 0;
1779 }
1780
1781 static int fusb302_pm_suspend(struct device *dev)
1782 {
1783         struct fusb302_chip *chip = dev->driver_data;
1784         unsigned long flags;
1785
1786         spin_lock_irqsave(&chip->irq_lock, flags);
1787         chip->irq_suspended = true;
1788         spin_unlock_irqrestore(&chip->irq_lock, flags);
1789
1790         /* Make sure any pending irq_work is finished before the bus suspends */
1791         flush_work(&chip->irq_work);
1792         return 0;
1793 }
1794
1795 static int fusb302_pm_resume(struct device *dev)
1796 {
1797         struct fusb302_chip *chip = dev->driver_data;
1798         unsigned long flags;
1799
1800         spin_lock_irqsave(&chip->irq_lock, flags);
1801         if (chip->irq_while_suspended) {
1802                 schedule_work(&chip->irq_work);
1803                 chip->irq_while_suspended = false;
1804         }
1805         chip->irq_suspended = false;
1806         spin_unlock_irqrestore(&chip->irq_lock, flags);
1807
1808         return 0;
1809 }
1810
1811 static const struct of_device_id fusb302_dt_match[] = {
1812         {.compatible = "fcs,fusb302"},
1813         {},
1814 };
1815 MODULE_DEVICE_TABLE(of, fusb302_dt_match);
1816
1817 static const struct i2c_device_id fusb302_i2c_device_id[] = {
1818         {"typec_fusb302", 0},
1819         {},
1820 };
1821 MODULE_DEVICE_TABLE(i2c, fusb302_i2c_device_id);
1822
1823 static const struct dev_pm_ops fusb302_pm_ops = {
1824         .suspend = fusb302_pm_suspend,
1825         .resume = fusb302_pm_resume,
1826 };
1827
1828 static struct i2c_driver fusb302_driver = {
1829         .driver = {
1830                    .name = "typec_fusb302",
1831                    .pm = &fusb302_pm_ops,
1832                    .of_match_table = of_match_ptr(fusb302_dt_match),
1833                    },
1834         .probe = fusb302_probe,
1835         .remove = fusb302_remove,
1836         .id_table = fusb302_i2c_device_id,
1837 };
1838 module_i2c_driver(fusb302_driver);
1839
1840 MODULE_AUTHOR("Yueyao Zhu <[email protected]>");
1841 MODULE_DESCRIPTION("Fairchild FUSB302 Type-C Chip Driver");
1842 MODULE_LICENSE("GPL");