drivers/input/keyboard/cap11xx.c

   1 // SPDX-License-Identifier: GPL-2.0-only
   2 /*
   3  * Input driver for Microchip CAP11xx based capacitive touch sensors
   4  *
   5  * (c) 2014 Daniel Mack <[email protected]>
   6  */
   7
   8 #include <linux/kernel.h>
   9 #include <linux/module.h>
  10 #include <linux/interrupt.h>
  11 #include <linux/input.h>
  12 #include <linux/leds.h>
  13 #include <linux/of.h>
  14 #include <linux/regmap.h>
  15 #include <linux/i2c.h>
  16 #include <linux/gpio/consumer.h>
  17 #include <linux/bitfield.h>
  18
  19 #define CAP11XX_REG_MAIN_CONTROL        0x00
  20 #define CAP11XX_REG_MAIN_CONTROL_GAIN_SHIFT     (6)
  21 #define CAP11XX_REG_MAIN_CONTROL_GAIN_MASK      (0xc0)
  22 #define CAP11XX_REG_MAIN_CONTROL_DLSEEP         BIT(4)
  23 #define CAP11XX_REG_GENERAL_STATUS      0x02
  24 #define CAP11XX_REG_SENSOR_INPUT        0x03
  25 #define CAP11XX_REG_NOISE_FLAG_STATUS   0x0a
  26 #define CAP11XX_REG_SENOR_DELTA(X)      (0x10 + (X))
  27 #define CAP11XX_REG_SENSITIVITY_CONTROL 0x1f
  28 #define CAP11XX_REG_SENSITIVITY_CONTROL_DELTA_SENSE_MASK        0x70
  29 #define CAP11XX_REG_CONFIG              0x20
  30 #define CAP11XX_REG_SENSOR_ENABLE       0x21
  31 #define CAP11XX_REG_SENSOR_CONFIG       0x22
  32 #define CAP11XX_REG_SENSOR_CONFIG2      0x23
  33 #define CAP11XX_REG_SAMPLING_CONFIG     0x24
  34 #define CAP11XX_REG_CALIBRATION         0x26
  35 #define CAP11XX_REG_INT_ENABLE          0x27
  36 #define CAP11XX_REG_REPEAT_RATE         0x28
  37 #define CAP11XX_REG_SIGNAL_GUARD_ENABLE 0x29
  38 #define CAP11XX_REG_MT_CONFIG           0x2a
  39 #define CAP11XX_REG_MT_PATTERN_CONFIG   0x2b
  40 #define CAP11XX_REG_MT_PATTERN          0x2d
  41 #define CAP11XX_REG_RECALIB_CONFIG      0x2f
  42 #define CAP11XX_REG_SENSOR_THRESH(X)    (0x30 + (X))
  43 #define CAP11XX_REG_SENSOR_NOISE_THRESH 0x38
  44 #define CAP11XX_REG_STANDBY_CHANNEL     0x40
  45 #define CAP11XX_REG_STANDBY_CONFIG      0x41
  46 #define CAP11XX_REG_STANDBY_SENSITIVITY 0x42
  47 #define CAP11XX_REG_STANDBY_THRESH      0x43
  48 #define CAP11XX_REG_CONFIG2             0x44
  49 #define CAP11XX_REG_CONFIG2_ALT_POL     BIT(6)
  50 #define CAP11XX_REG_SENSOR_BASE_CNT(X)  (0x50 + (X))
  51 #define CAP11XX_REG_LED_POLARITY        0x73
  52 #define CAP11XX_REG_LED_OUTPUT_CONTROL  0x74
  53 #define CAP11XX_REG_CALIB_SENSITIVITY_CONFIG    0x80
  54 #define CAP11XX_REG_CALIB_SENSITIVITY_CONFIG2   0x81
  55
  56 #define CAP11XX_REG_LED_DUTY_CYCLE_1    0x90
  57 #define CAP11XX_REG_LED_DUTY_CYCLE_2    0x91
  58 #define CAP11XX_REG_LED_DUTY_CYCLE_3    0x92
  59 #define CAP11XX_REG_LED_DUTY_CYCLE_4    0x93
  60
  61 #define CAP11XX_REG_LED_DUTY_MIN_MASK   (0x0f)
  62 #define CAP11XX_REG_LED_DUTY_MIN_MASK_SHIFT     (0)
  63 #define CAP11XX_REG_LED_DUTY_MAX_MASK   (0xf0)
  64 #define CAP11XX_REG_LED_DUTY_MAX_MASK_SHIFT     (4)
  65 #define CAP11XX_REG_LED_DUTY_MAX_VALUE  (15)
  66
  67 #define CAP11XX_REG_SENSOR_CALIB        (0xb1 + (X))
  68 #define CAP11XX_REG_SENSOR_CALIB_LSB1   0xb9
  69 #define CAP11XX_REG_SENSOR_CALIB_LSB2   0xba
  70 #define CAP11XX_REG_PRODUCT_ID          0xfd
  71 #define CAP11XX_REG_MANUFACTURER_ID     0xfe
  72 #define CAP11XX_REG_REVISION            0xff
  73
  74 #define CAP11XX_MANUFACTURER_ID 0x5d
  75
  76 #ifdef CONFIG_LEDS_CLASS
  77 struct cap11xx_led {
  78         struct cap11xx_priv *priv;
  79         struct led_classdev cdev;
  80         u32 reg;
  81 };
  82 #endif
  83
  84 struct cap11xx_priv {
  85         struct regmap *regmap;
  86         struct device *dev;
  87         struct input_dev *idev;
  88         const struct cap11xx_hw_model *model;
  89
  90         struct cap11xx_led *leds;
  91         int num_leds;
  92
  93         /* config */
  94         u8 analog_gain;
  95         u8 sensitivity_delta_sense;
  96         u8 signal_guard_inputs_mask;
  97         u32 thresholds[8];
  98         u32 calib_sensitivities[8];
  99         u32 keycodes[];
 100 };
 101
 102 struct cap11xx_hw_model {
 103         u8 product_id;
 104         unsigned int num_channels;
 105         unsigned int num_leds;
 106         bool has_gain;
 107         bool has_irq_config;
 108         bool has_sensitivity_control;
 109         bool has_signal_guard;
 110 };
 111
 112 static const struct reg_default cap11xx_reg_defaults[] = {
 113         { CAP11XX_REG_MAIN_CONTROL,             0x00 },
 114         { CAP11XX_REG_GENERAL_STATUS,           0x00 },
 115         { CAP11XX_REG_SENSOR_INPUT,             0x00 },
 116         { CAP11XX_REG_NOISE_FLAG_STATUS,        0x00 },
 117         { CAP11XX_REG_SENSITIVITY_CONTROL,      0x2f },
 118         { CAP11XX_REG_CONFIG,                   0x20 },
 119         { CAP11XX_REG_SENSOR_ENABLE,            0x3f },
 120         { CAP11XX_REG_SENSOR_CONFIG,            0xa4 },
 121         { CAP11XX_REG_SENSOR_CONFIG2,           0x07 },
 122         { CAP11XX_REG_SAMPLING_CONFIG,          0x39 },
 123         { CAP11XX_REG_CALIBRATION,              0x00 },
 124         { CAP11XX_REG_INT_ENABLE,               0x3f },
 125         { CAP11XX_REG_REPEAT_RATE,              0x3f },
 126         { CAP11XX_REG_MT_CONFIG,                0x80 },
 127         { CAP11XX_REG_MT_PATTERN_CONFIG,        0x00 },
 128         { CAP11XX_REG_MT_PATTERN,               0x3f },
 129         { CAP11XX_REG_RECALIB_CONFIG,           0x8a },
 130         { CAP11XX_REG_SENSOR_THRESH(0),         0x40 },
 131         { CAP11XX_REG_SENSOR_THRESH(1),         0x40 },
 132         { CAP11XX_REG_SENSOR_THRESH(2),         0x40 },
 133         { CAP11XX_REG_SENSOR_THRESH(3),         0x40 },
 134         { CAP11XX_REG_SENSOR_THRESH(4),         0x40 },
 135         { CAP11XX_REG_SENSOR_THRESH(5),         0x40 },
 136         { CAP11XX_REG_SENSOR_NOISE_THRESH,      0x01 },
 137         { CAP11XX_REG_STANDBY_CHANNEL,          0x00 },
 138         { CAP11XX_REG_STANDBY_CONFIG,           0x39 },
 139         { CAP11XX_REG_STANDBY_SENSITIVITY,      0x02 },
 140         { CAP11XX_REG_STANDBY_THRESH,           0x40 },
 141         { CAP11XX_REG_CONFIG2,                  0x40 },
 142         { CAP11XX_REG_LED_POLARITY,             0x00 },
 143         { CAP11XX_REG_SENSOR_CALIB_LSB1,        0x00 },
 144         { CAP11XX_REG_SENSOR_CALIB_LSB2,        0x00 },
 145 };
 146
 147 static bool cap11xx_volatile_reg(struct device *dev, unsigned int reg)
 148 {
 149         switch (reg) {
 150         case CAP11XX_REG_MAIN_CONTROL:
 151         case CAP11XX_REG_SENSOR_INPUT:
 152         case CAP11XX_REG_SENOR_DELTA(0):
 153         case CAP11XX_REG_SENOR_DELTA(1):
 154         case CAP11XX_REG_SENOR_DELTA(2):
 155         case CAP11XX_REG_SENOR_DELTA(3):
 156         case CAP11XX_REG_SENOR_DELTA(4):
 157         case CAP11XX_REG_SENOR_DELTA(5):
 158                 return true;
 159         }
 160
 161         return false;
 162 }
 163
 164 static const struct regmap_config cap11xx_regmap_config = {
 165         .reg_bits = 8,
 166         .val_bits = 8,
 167
 168         .max_register = CAP11XX_REG_REVISION,
 169         .reg_defaults = cap11xx_reg_defaults,
 170
 171         .num_reg_defaults = ARRAY_SIZE(cap11xx_reg_defaults),
 172         .cache_type = REGCACHE_MAPLE,
 173         .volatile_reg = cap11xx_volatile_reg,
 174 };
 175
 176 static int cap11xx_write_calib_sens_config_1(struct cap11xx_priv *priv)
 177 {
 178         return regmap_write(priv->regmap,
 179                             CAP11XX_REG_CALIB_SENSITIVITY_CONFIG,
 180                             (priv->calib_sensitivities[3] << 6) |
 181                             (priv->calib_sensitivities[2] << 4) |
 182                             (priv->calib_sensitivities[1] << 2) |
 183                             priv->calib_sensitivities[0]);
 184 }
 185
 186 static int cap11xx_write_calib_sens_config_2(struct cap11xx_priv *priv)
 187 {
 188         return regmap_write(priv->regmap,
 189                             CAP11XX_REG_CALIB_SENSITIVITY_CONFIG2,
 190                             (priv->calib_sensitivities[7] << 6) |
 191                             (priv->calib_sensitivities[6] << 4) |
 192                             (priv->calib_sensitivities[5] << 2) |
 193                             priv->calib_sensitivities[4]);
 194 }
 195
 196 static int cap11xx_init_keys(struct cap11xx_priv *priv)
 197 {
 198         struct device_node *node = priv->dev->of_node;
 199         struct device *dev = priv->dev;
 200         int i, error;
 201         u32 u32_val;
 202
 203         if (!node) {
 204                 dev_err(dev, "Corresponding DT entry is not available\n");
 205                 return -ENODEV;
 206         }
 207
 208         if (!of_property_read_u32(node, "microchip,sensor-gain", &u32_val)) {
 209                 if (!priv->model->has_gain) {
 210                         dev_warn(dev,
 211                                  "This model doesn't support 'sensor-gain'\n");
 212                 } else if (is_power_of_2(u32_val) && u32_val <= 8) {
 213                         priv->analog_gain = (u8)ilog2(u32_val);
 214
 215                         error = regmap_update_bits(priv->regmap,
 216                                 CAP11XX_REG_MAIN_CONTROL,
 217                                 CAP11XX_REG_MAIN_CONTROL_GAIN_MASK,
 218                                 priv->analog_gain << CAP11XX_REG_MAIN_CONTROL_GAIN_SHIFT);
 219                         if (error)
 220                                 return error;
 221                 } else {
 222                         dev_err(dev, "Invalid sensor-gain value %u\n", u32_val);
 223                         return -EINVAL;
 224                 }
 225         }
 226
 227         if (of_property_read_bool(node, "microchip,irq-active-high")) {
 228                 if (priv->model->has_irq_config) {
 229                         error = regmap_update_bits(priv->regmap,
 230                                                    CAP11XX_REG_CONFIG2,
 231                                                    CAP11XX_REG_CONFIG2_ALT_POL,
 232                                                    0);
 233                         if (error)
 234                                 return error;
 235                 } else {
 236                         dev_warn(dev,
 237                                  "This model doesn't support 'irq-active-high'\n");
 238                 }
 239         }
 240
 241         if (!of_property_read_u32(node, "microchip,sensitivity-delta-sense", &u32_val)) {
 242                 if (!is_power_of_2(u32_val) || u32_val > 128) {
 243                         dev_err(dev, "Invalid sensitivity-delta-sense value %u\n", u32_val);
 244                         return -EINVAL;
 245                 }
 246
 247                 priv->sensitivity_delta_sense = (u8)ilog2(u32_val);
 248                 u32_val = ~(FIELD_PREP(CAP11XX_REG_SENSITIVITY_CONTROL_DELTA_SENSE_MASK,
 249                                         priv->sensitivity_delta_sense));
 250
 251                 error = regmap_update_bits(priv->regmap,
 252                                            CAP11XX_REG_SENSITIVITY_CONTROL,
 253                                            CAP11XX_REG_SENSITIVITY_CONTROL_DELTA_SENSE_MASK,
 254                                            u32_val);
 255                 if (error)
 256                         return error;
 257         }
 258
 259         if (!of_property_read_u32_array(node, "microchip,input-threshold",
 260                                         priv->thresholds, priv->model->num_channels)) {
 261                 for (i = 0; i < priv->model->num_channels; i++) {
 262                         if (priv->thresholds[i] > 127) {
 263                                 dev_err(dev, "Invalid input-threshold value %u\n",
 264                                         priv->thresholds[i]);
 265                                 return -EINVAL;
 266                         }
 267
 268                         error = regmap_write(priv->regmap,
 269                                              CAP11XX_REG_SENSOR_THRESH(i),
 270                                              priv->thresholds[i]);
 271                         if (error)
 272                                 return error;
 273                 }
 274         }
 275
 276         if (!of_property_read_u32_array(node, "microchip,calib-sensitivity",
 277                                         priv->calib_sensitivities,
 278                                         priv->model->num_channels)) {
 279                 if (priv->model->has_sensitivity_control) {
 280                         for (i = 0; i < priv->model->num_channels; i++) {
 281                                 if (!is_power_of_2(priv->calib_sensitivities[i]) ||
 282                                     priv->calib_sensitivities[i] > 4) {
 283                                         dev_err(dev, "Invalid calib-sensitivity value %u\n",
 284                                                 priv->calib_sensitivities[i]);
 285                                         return -EINVAL;
 286                                 }
 287                                 priv->calib_sensitivities[i] = ilog2(priv->calib_sensitivities[i]);
 288                         }
 289
 290                         error = cap11xx_write_calib_sens_config_1(priv);
 291                         if (error)
 292                                 return error;
 293
 294                         if (priv->model->num_channels > 4) {
 295                                 error = cap11xx_write_calib_sens_config_2(priv);
 296                                 if (error)
 297                                         return error;
 298                         }
 299                 } else {
 300                         dev_warn(dev,
 301                                  "This model doesn't support 'calib-sensitivity'\n");
 302                 }
 303         }
 304
 305         for (i = 0; i < priv->model->num_channels; i++) {
 306                 if (!of_property_read_u32_index(node, "microchip,signal-guard",
 307                                                 i, &u32_val)) {
 308                         if (u32_val > 1)
 309                                 return -EINVAL;
 310                         if (u32_val)
 311                                 priv->signal_guard_inputs_mask |= 0x01 << i;
 312                 }
 313         }
 314
 315         if (priv->signal_guard_inputs_mask) {
 316                 if (priv->model->has_signal_guard) {
 317                         error = regmap_write(priv->regmap,
 318                                              CAP11XX_REG_SIGNAL_GUARD_ENABLE,
 319                                              priv->signal_guard_inputs_mask);
 320                         if (error)
 321                                 return error;
 322                 } else {
 323                         dev_warn(dev,
 324                                  "This model doesn't support 'signal-guard'\n");
 325                 }
 326         }
 327
 328         /* Provide some useful defaults */
 329         for (i = 0; i < priv->model->num_channels; i++)
 330                 priv->keycodes[i] = KEY_A + i;
 331
 332         of_property_read_u32_array(node, "linux,keycodes",
 333                                    priv->keycodes, priv->model->num_channels);
 334
 335         /* Disable autorepeat. The Linux input system has its own handling. */
 336         error = regmap_write(priv->regmap, CAP11XX_REG_REPEAT_RATE, 0);
 337         if (error)
 338                 return error;
 339
 340         return 0;
 341 }
 342
 343 static irqreturn_t cap11xx_thread_func(int irq_num, void *data)
 344 {
 345         struct cap11xx_priv *priv = data;
 346         unsigned int status;
 347         int ret, i;
 348
 349         /*
 350          * Deassert interrupt. This needs to be done before reading the status
 351          * registers, which will not carry valid values otherwise.
 352          */
 353         ret = regmap_update_bits(priv->regmap, CAP11XX_REG_MAIN_CONTROL, 1, 0);
 354         if (ret < 0)
 355                 goto out;
 356
 357         ret = regmap_read(priv->regmap, CAP11XX_REG_SENSOR_INPUT, &status);
 358         if (ret < 0)
 359                 goto out;
 360
 361         for (i = 0; i < priv->idev->keycodemax; i++)
 362                 input_report_key(priv->idev, priv->keycodes[i],
 363                                  status & (1 << i));
 364
 365         input_sync(priv->idev);
 366
 367 out:
 368         return IRQ_HANDLED;
 369 }
 370
 371 static int cap11xx_set_sleep(struct cap11xx_priv *priv, bool sleep)
 372 {
 373         /*
 374          * DLSEEP mode will turn off all LEDS, prevent this
 375          */
 376         if (IS_ENABLED(CONFIG_LEDS_CLASS) && priv->num_leds)
 377                 return 0;
 378
 379         return regmap_update_bits(priv->regmap, CAP11XX_REG_MAIN_CONTROL,
 380                                   CAP11XX_REG_MAIN_CONTROL_DLSEEP,
 381                                   sleep ? CAP11XX_REG_MAIN_CONTROL_DLSEEP : 0);
 382 }
 383
 384 static int cap11xx_input_open(struct input_dev *idev)
 385 {
 386         struct cap11xx_priv *priv = input_get_drvdata(idev);
 387
 388         return cap11xx_set_sleep(priv, false);
 389 }
 390
 391 static void cap11xx_input_close(struct input_dev *idev)
 392 {
 393         struct cap11xx_priv *priv = input_get_drvdata(idev);
 394
 395         cap11xx_set_sleep(priv, true);
 396 }
 397
 398 #ifdef CONFIG_LEDS_CLASS
 399 static int cap11xx_led_set(struct led_classdev *cdev,
 400                             enum led_brightness value)
 401 {
 402         struct cap11xx_led *led = container_of(cdev, struct cap11xx_led, cdev);
 403         struct cap11xx_priv *priv = led->priv;
 404
 405         /*
 406          * All LEDs share the same duty cycle as this is a HW
 407          * limitation. Brightness levels per LED are either
 408          * 0 (OFF) and 1 (ON).
 409          */
 410         return regmap_update_bits(priv->regmap,
 411                                   CAP11XX_REG_LED_OUTPUT_CONTROL,
 412                                   BIT(led->reg),
 413                                   value ? BIT(led->reg) : 0);
 414 }
 415
 416 static int cap11xx_init_leds(struct device *dev,
 417                              struct cap11xx_priv *priv, int num_leds)
 418 {
 419         struct device_node *node = dev->of_node, *child;
 420         struct cap11xx_led *led;
 421         int cnt = of_get_child_count(node);
 422         int error;
 423
 424         if (!num_leds || !cnt)
 425                 return 0;
 426
 427         if (cnt > num_leds)
 428                 return -EINVAL;
 429
 430         led = devm_kcalloc(dev, cnt, sizeof(struct cap11xx_led), GFP_KERNEL);
 431         if (!led)
 432                 return -ENOMEM;
 433
 434         priv->leds = led;
 435
 436         error = regmap_update_bits(priv->regmap,
 437                                 CAP11XX_REG_LED_OUTPUT_CONTROL, 0xff, 0);
 438         if (error)
 439                 return error;
 440
 441         error = regmap_update_bits(priv->regmap, CAP11XX_REG_LED_DUTY_CYCLE_4,
 442                                 CAP11XX_REG_LED_DUTY_MAX_MASK,
 443                                 CAP11XX_REG_LED_DUTY_MAX_VALUE <<
 444                                 CAP11XX_REG_LED_DUTY_MAX_MASK_SHIFT);
 445         if (error)
 446                 return error;
 447
 448         for_each_child_of_node(node, child) {
 449                 u32 reg;
 450
 451                 led->cdev.name =
 452                         of_get_property(child, "label", NULL) ? : child->name;
 453                 led->cdev.default_trigger =
 454                         of_get_property(child, "linux,default-trigger", NULL);
 455                 led->cdev.flags = 0;
 456                 led->cdev.brightness_set_blocking = cap11xx_led_set;
 457                 led->cdev.max_brightness = 1;
 458                 led->cdev.brightness = LED_OFF;
 459
 460                 error = of_property_read_u32(child, "reg", &reg);
 461                 if (error != 0 || reg >= num_leds) {
 462                         of_node_put(child);
 463                         return -EINVAL;
 464                 }
 465
 466                 led->reg = reg;
 467                 led->priv = priv;
 468
 469                 error = devm_led_classdev_register(dev, &led->cdev);
 470                 if (error) {
 471                         of_node_put(child);
 472                         return error;
 473                 }
 474
 475                 priv->num_leds++;
 476                 led++;
 477         }
 478
 479         return 0;
 480 }
 481 #else
 482 static int cap11xx_init_leds(struct device *dev,
 483                              struct cap11xx_priv *priv, int num_leds)
 484 {
 485         return 0;
 486 }
 487 #endif
 488
 489 static int cap11xx_i2c_probe(struct i2c_client *i2c_client)
 490 {
 491         const struct i2c_device_id *id;
 492         const struct cap11xx_hw_model *cap;
 493         struct device *dev = &i2c_client->dev;
 494         struct cap11xx_priv *priv;
 495         int i, error;
 496         unsigned int val, rev;
 497
 498         id = i2c_client_get_device_id(i2c_client);
 499         cap = i2c_get_match_data(i2c_client);
 500         if (!id || !cap || !cap->num_channels) {
 501                 dev_err(dev, "Invalid device configuration\n");
 502                 return -EINVAL;
 503         }
 504
 505         priv = devm_kzalloc(dev,
 506                             struct_size(priv, keycodes, cap->num_channels),
 507                             GFP_KERNEL);
 508         if (!priv)
 509                 return -ENOMEM;
 510
 511         priv->dev = dev;
 512
 513         priv->regmap = devm_regmap_init_i2c(i2c_client, &cap11xx_regmap_config);
 514         if (IS_ERR(priv->regmap))
 515                 return PTR_ERR(priv->regmap);
 516
 517         error = regmap_read(priv->regmap, CAP11XX_REG_PRODUCT_ID, &val);
 518         if (error)
 519                 return error;
 520
 521         if (val != cap->product_id) {
 522                 dev_err(dev, "Product ID: Got 0x%02x, expected 0x%02x\n",
 523                         val, cap->product_id);
 524                 return -ENXIO;
 525         }
 526
 527         error = regmap_read(priv->regmap, CAP11XX_REG_MANUFACTURER_ID, &val);
 528         if (error)
 529                 return error;
 530
 531         if (val != CAP11XX_MANUFACTURER_ID) {
 532                 dev_err(dev, "Manufacturer ID: Got 0x%02x, expected 0x%02x\n",
 533                         val, CAP11XX_MANUFACTURER_ID);
 534                 return -ENXIO;
 535         }
 536
 537         error = regmap_read(priv->regmap, CAP11XX_REG_REVISION, &rev);
 538         if (error < 0)
 539                 return error;
 540
 541         dev_info(dev, "CAP11XX detected, model %s, revision 0x%02x\n",
 542                          id->name, rev);
 543
 544         priv->model = cap;
 545
 546         dev_info(dev, "CAP11XX device detected, model %s, revision 0x%02x\n",
 547                  id->name, rev);
 548
 549         error = cap11xx_init_keys(priv);
 550         if (error)
 551                 return error;
 552
 553         priv->idev = devm_input_allocate_device(dev);
 554         if (!priv->idev)
 555                 return -ENOMEM;
 556
 557         priv->idev->name = "CAP11XX capacitive touch sensor";
 558         priv->idev->id.bustype = BUS_I2C;
 559         priv->idev->evbit[0] = BIT_MASK(EV_KEY);
 560
 561         if (of_property_read_bool(dev->of_node, "autorepeat"))
 562                 __set_bit(EV_REP, priv->idev->evbit);
 563
 564         for (i = 0; i < cap->num_channels; i++)
 565                 __set_bit(priv->keycodes[i], priv->idev->keybit);
 566
 567         __clear_bit(KEY_RESERVED, priv->idev->keybit);
 568
 569         priv->idev->keycode = priv->keycodes;
 570         priv->idev->keycodesize = sizeof(priv->keycodes[0]);
 571         priv->idev->keycodemax = cap->num_channels;
 572
 573         priv->idev->id.vendor = CAP11XX_MANUFACTURER_ID;
 574         priv->idev->id.product = cap->product_id;
 575         priv->idev->id.version = rev;
 576
 577         priv->idev->open = cap11xx_input_open;
 578         priv->idev->close = cap11xx_input_close;
 579
 580         error = cap11xx_init_leds(dev, priv, cap->num_leds);
 581         if (error)
 582                 return error;
 583
 584         input_set_drvdata(priv->idev, priv);
 585
 586         /*
 587          * Put the device in deep sleep mode for now.
 588          * ->open() will bring it back once the it is actually needed.
 589          */
 590         cap11xx_set_sleep(priv, true);
 591
 592         error = input_register_device(priv->idev);
 593         if (error)
 594                 return error;
 595
 596         error = devm_request_threaded_irq(dev, i2c_client->irq,
 597                                           NULL, cap11xx_thread_func,
 598                                           IRQF_ONESHOT, dev_name(dev), priv);
 599         if (error)
 600                 return error;
 601
 602         return 0;
 603 }
 604
 605 static const struct cap11xx_hw_model cap1106_model = {
 606         .product_id = 0x55, .num_channels = 6, .num_leds = 0,
 607         .has_gain = true,
 608         .has_irq_config = true,
 609 };
 610
 611 static const struct cap11xx_hw_model cap1126_model = {
 612         .product_id = 0x53, .num_channels = 6, .num_leds = 2,
 613         .has_gain = true,
 614         .has_irq_config = true,
 615 };
 616
 617 static const struct cap11xx_hw_model cap1188_model = {
 618         .product_id = 0x50, .num_channels = 8, .num_leds = 8,
 619         .has_gain = true,
 620         .has_irq_config = true,
 621 };
 622
 623 static const struct cap11xx_hw_model cap1203_model = {
 624         .product_id = 0x6d, .num_channels = 3, .num_leds = 0,
 625 };
 626
 627 static const struct cap11xx_hw_model cap1206_model = {
 628         .product_id = 0x67, .num_channels = 6, .num_leds = 0,
 629 };
 630
 631 static const struct cap11xx_hw_model cap1293_model = {
 632         .product_id = 0x6f, .num_channels = 3, .num_leds = 0,
 633         .has_gain = true,
 634         .has_sensitivity_control = true,
 635         .has_signal_guard = true,
 636 };
 637
 638 static const struct cap11xx_hw_model cap1298_model = {
 639         .product_id = 0x71, .num_channels = 8, .num_leds = 0,
 640         .has_gain = true,
 641         .has_sensitivity_control = true,
 642         .has_signal_guard = true,
 643 };
 644
 645 static const struct of_device_id cap11xx_dt_ids[] = {
 646         { .compatible = "microchip,cap1106", .data = &cap1106_model },
 647         { .compatible = "microchip,cap1126", .data = &cap1126_model },
 648         { .compatible = "microchip,cap1188", .data = &cap1188_model },
 649         { .compatible = "microchip,cap1203", .data = &cap1203_model },
 650         { .compatible = "microchip,cap1206", .data = &cap1206_model },
 651         { .compatible = "microchip,cap1293", .data = &cap1293_model },
 652         { .compatible = "microchip,cap1298", .data = &cap1298_model },
 653         { }
 654 };
 655 MODULE_DEVICE_TABLE(of, cap11xx_dt_ids);
 656
 657 static const struct i2c_device_id cap11xx_i2c_ids[] = {
 658         { "cap1106", (kernel_ulong_t)&cap1106_model },
 659         { "cap1126", (kernel_ulong_t)&cap1126_model },
 660         { "cap1188", (kernel_ulong_t)&cap1188_model },
 661         { "cap1203", (kernel_ulong_t)&cap1203_model },
 662         { "cap1206", (kernel_ulong_t)&cap1206_model },
 663         { "cap1293", (kernel_ulong_t)&cap1293_model },
 664         { "cap1298", (kernel_ulong_t)&cap1298_model },
 665         { }
 666 };
 667 MODULE_DEVICE_TABLE(i2c, cap11xx_i2c_ids);
 668
 669 static struct i2c_driver cap11xx_i2c_driver = {
 670         .driver = {
 671                 .name   = "cap11xx",
 672                 .of_match_table = cap11xx_dt_ids,
 673         },
 674         .id_table       = cap11xx_i2c_ids,
 675         .probe          = cap11xx_i2c_probe,
 676 };
 677
 678 module_i2c_driver(cap11xx_i2c_driver);
 679
 680 MODULE_DESCRIPTION("Microchip CAP11XX driver");
 681 MODULE_AUTHOR("Daniel Mack <[email protected]>");
 682 MODULE_LICENSE("GPL v2");