drivers/usb/renesas_usbhs/mod.c

   1 // SPDX-License-Identifier: GPL-1.0+
   2 /*
   3  * Renesas USB driver
   4  *
   5  * Copyright (C) 2011 Renesas Solutions Corp.
   6  * Kuninori Morimoto <[email protected]>
   7  */
   8 #include <linux/interrupt.h>
   9
  10 #include "common.h"
  11 #include "mod.h"
  12
  13 #define usbhs_priv_to_modinfo(priv) (&priv->mod_info)
  14 #define usbhs_mod_info_call(priv, func, param...)       \
  15 ({                                              \
  16         struct usbhs_mod_info *info;            \
  17         info = usbhs_priv_to_modinfo(priv);     \
  18         !info->func ? 0 :                       \
  19          info->func(param);                     \
  20 })
  21
  22 /*
  23  *              autonomy
  24  *
  25  * these functions are used if platform doesn't have external phy.
  26  *  -> there is no "notify_hotplug" callback from platform
  27  *  -> call "notify_hotplug" by itself
  28  *  -> use own interrupt to connect/disconnect
  29  *  -> it mean module clock is always ON
  30  *             ~~~~~~~~~~~~~~~~~~~~~~~~~
  31  */
  32 static int usbhsm_autonomy_get_vbus(struct platform_device *pdev)
  33 {
  34         struct usbhs_priv *priv = usbhs_pdev_to_priv(pdev);
  35
  36         return  VBSTS & usbhs_read(priv, INTSTS0);
  37 }
  38
  39 static int usbhsm_autonomy_irq_vbus(struct usbhs_priv *priv,
  40                                     struct usbhs_irq_state *irq_state)
  41 {
  42         struct platform_device *pdev = usbhs_priv_to_pdev(priv);
  43
  44         renesas_usbhs_call_notify_hotplug(pdev);
  45
  46         return 0;
  47 }
  48
  49 void usbhs_mod_autonomy_mode(struct usbhs_priv *priv)
  50 {
  51         struct usbhs_mod_info *info = usbhs_priv_to_modinfo(priv);
  52
  53         info->irq_vbus          = usbhsm_autonomy_irq_vbus;
  54         priv->pfunc.get_vbus    = usbhsm_autonomy_get_vbus;
  55
  56         usbhs_irq_callback_update(priv, NULL);
  57 }
  58
  59 /*
  60  *              host / gadget functions
  61  *
  62  * renesas_usbhs host/gadget can register itself by below functions.
  63  * these functions are called when probe
  64  *
  65  */
  66 void usbhs_mod_register(struct usbhs_priv *priv, struct usbhs_mod *mod, int id)
  67 {
  68         struct usbhs_mod_info *info = usbhs_priv_to_modinfo(priv);
  69
  70         info->mod[id]   = mod;
  71         mod->priv       = priv;
  72 }
  73
  74 struct usbhs_mod *usbhs_mod_get(struct usbhs_priv *priv, int id)
  75 {
  76         struct usbhs_mod_info *info = usbhs_priv_to_modinfo(priv);
  77         struct usbhs_mod *ret = NULL;
  78
  79         switch (id) {
  80         case USBHS_HOST:
  81         case USBHS_GADGET:
  82                 ret = info->mod[id];
  83                 break;
  84         }
  85
  86         return ret;
  87 }
  88
  89 int usbhs_mod_is_host(struct usbhs_priv *priv)
  90 {
  91         struct usbhs_mod *mod = usbhs_mod_get_current(priv);
  92         struct usbhs_mod_info *info = usbhs_priv_to_modinfo(priv);
  93
  94         if (!mod)
  95                 return -EINVAL;
  96
  97         return info->mod[USBHS_HOST] == mod;
  98 }
  99
 100 struct usbhs_mod *usbhs_mod_get_current(struct usbhs_priv *priv)
 101 {
 102         struct usbhs_mod_info *info = usbhs_priv_to_modinfo(priv);
 103
 104         return info->curt;
 105 }
 106
 107 int usbhs_mod_change(struct usbhs_priv *priv, int id)
 108 {
 109         struct usbhs_mod_info *info = usbhs_priv_to_modinfo(priv);
 110         struct usbhs_mod *mod = NULL;
 111         int ret = 0;
 112
 113         /* id < 0 mean no current */
 114         switch (id) {
 115         case USBHS_HOST:
 116         case USBHS_GADGET:
 117                 mod = info->mod[id];
 118                 break;
 119         default:
 120                 ret = -EINVAL;
 121         }
 122         info->curt = mod;
 123
 124         return ret;
 125 }
 126
 127 static irqreturn_t usbhs_interrupt(int irq, void *data);
 128 int usbhs_mod_probe(struct usbhs_priv *priv)
 129 {
 130         struct device *dev = usbhs_priv_to_dev(priv);
 131         int ret;
 132
 133         /*
 134          * install host/gadget driver
 135          */
 136         ret = usbhs_mod_host_probe(priv);
 137         if (ret < 0)
 138                 return ret;
 139
 140         ret = usbhs_mod_gadget_probe(priv);
 141         if (ret < 0)
 142                 goto mod_init_host_err;
 143
 144         /* irq settings */
 145         ret = devm_request_irq(dev, priv->irq, usbhs_interrupt,
 146                           priv->irqflags, dev_name(dev), priv);
 147         if (ret) {
 148                 dev_err(dev, "irq request err\n");
 149                 goto mod_init_gadget_err;
 150         }
 151
 152         return ret;
 153
 154 mod_init_gadget_err:
 155         usbhs_mod_gadget_remove(priv);
 156 mod_init_host_err:
 157         usbhs_mod_host_remove(priv);
 158
 159         return ret;
 160 }
 161
 162 void usbhs_mod_remove(struct usbhs_priv *priv)
 163 {
 164         usbhs_mod_host_remove(priv);
 165         usbhs_mod_gadget_remove(priv);
 166 }
 167
 168 /*
 169  *              status functions
 170  */
 171 int usbhs_status_get_device_state(struct usbhs_irq_state *irq_state)
 172 {
 173         int state = irq_state->intsts0 & DVSQ_MASK;
 174
 175         switch (state) {
 176         case POWER_STATE:
 177         case DEFAULT_STATE:
 178         case ADDRESS_STATE:
 179         case CONFIGURATION_STATE:
 180                 return state;
 181         }
 182
 183         return -EIO;
 184 }
 185
 186 int usbhs_status_get_ctrl_stage(struct usbhs_irq_state *irq_state)
 187 {
 188         /*
 189          * return value
 190          *
 191          * IDLE_SETUP_STAGE
 192          * READ_DATA_STAGE
 193          * READ_STATUS_STAGE
 194          * WRITE_DATA_STAGE
 195          * WRITE_STATUS_STAGE
 196          * NODATA_STATUS_STAGE
 197          * SEQUENCE_ERROR
 198          */
 199         return (int)irq_state->intsts0 & CTSQ_MASK;
 200 }
 201
 202 static int usbhs_status_get_each_irq(struct usbhs_priv *priv,
 203                                      struct usbhs_irq_state *state)
 204 {
 205         struct usbhs_mod *mod = usbhs_mod_get_current(priv);
 206         u16 intenb0, intenb1;
 207         unsigned long flags;
 208
 209         /********************  spin lock ********************/
 210         usbhs_lock(priv, flags);
 211         state->intsts0 = usbhs_read(priv, INTSTS0);
 212         intenb0 = usbhs_read(priv, INTENB0);
 213
 214         if (usbhs_mod_is_host(priv)) {
 215                 state->intsts1 = usbhs_read(priv, INTSTS1);
 216                 intenb1 = usbhs_read(priv, INTENB1);
 217         } else {
 218                 state->intsts1 = intenb1 = 0;
 219         }
 220
 221         /* mask */
 222         if (mod) {
 223                 state->brdysts = usbhs_read(priv, BRDYSTS);
 224                 state->nrdysts = usbhs_read(priv, NRDYSTS);
 225                 state->bempsts = usbhs_read(priv, BEMPSTS);
 226
 227                 state->bempsts &= mod->irq_bempsts;
 228                 state->brdysts &= mod->irq_brdysts;
 229         }
 230         usbhs_unlock(priv, flags);
 231         /********************  spin unlock ******************/
 232
 233         /*
 234          * Check whether the irq enable registers and the irq status are set
 235          * when IRQF_SHARED is set.
 236          */
 237         if (priv->irqflags & IRQF_SHARED) {
 238                 if (!(intenb0 & state->intsts0) &&
 239                     !(intenb1 & state->intsts1) &&
 240                     !(state->bempsts) &&
 241                     !(state->brdysts))
 242                         return -EIO;
 243         }
 244
 245         return 0;
 246 }
 247
 248 /*
 249  *              interrupt
 250  */
 251 #define INTSTS0_MAGIC 0xF800 /* acknowledge magical interrupt sources */
 252 #define INTSTS1_MAGIC 0xA870 /* acknowledge magical interrupt sources */
 253 static irqreturn_t usbhs_interrupt(int irq, void *data)
 254 {
 255         struct usbhs_priv *priv = data;
 256         struct usbhs_irq_state irq_state;
 257
 258         if (usbhs_status_get_each_irq(priv, &irq_state) < 0)
 259                 return IRQ_NONE;
 260
 261         /*
 262          * clear interrupt
 263          *
 264          * The hardware is _very_ picky to clear interrupt bit.
 265          * Especially INTSTS0_MAGIC, INTSTS1_MAGIC value.
 266          *
 267          * see
 268          *      "Operation"
 269          *       - "Control Transfer (DCP)"
 270          *         - Function :: VALID bit should 0
 271          */
 272         usbhs_write(priv, INTSTS0, ~irq_state.intsts0 & INTSTS0_MAGIC);
 273         if (usbhs_mod_is_host(priv))
 274                 usbhs_write(priv, INTSTS1, ~irq_state.intsts1 & INTSTS1_MAGIC);
 275
 276         /*
 277          * The driver should not clear the xxxSTS after the line of
 278          * "call irq callback functions" because each "if" statement is
 279          * possible to call the callback function for avoiding any side effects.
 280          */
 281         if (irq_state.intsts0 & BRDY)
 282                 usbhs_write(priv, BRDYSTS, ~irq_state.brdysts);
 283         usbhs_write(priv, NRDYSTS, ~irq_state.nrdysts);
 284         if (irq_state.intsts0 & BEMP)
 285                 usbhs_write(priv, BEMPSTS, ~irq_state.bempsts);
 286
 287         /*
 288          * call irq callback functions
 289          * see also
 290          *      usbhs_irq_setting_update
 291          */
 292
 293         /* INTSTS0 */
 294         if (irq_state.intsts0 & VBINT)
 295                 usbhs_mod_info_call(priv, irq_vbus, priv, &irq_state);
 296
 297         if (irq_state.intsts0 & DVST)
 298                 usbhs_mod_call(priv, irq_dev_state, priv, &irq_state);
 299
 300         if (irq_state.intsts0 & CTRT)
 301                 usbhs_mod_call(priv, irq_ctrl_stage, priv, &irq_state);
 302
 303         if (irq_state.intsts0 & BEMP)
 304                 usbhs_mod_call(priv, irq_empty, priv, &irq_state);
 305
 306         if (irq_state.intsts0 & BRDY)
 307                 usbhs_mod_call(priv, irq_ready, priv, &irq_state);
 308
 309         if (usbhs_mod_is_host(priv)) {
 310                 /* INTSTS1 */
 311                 if (irq_state.intsts1 & ATTCH)
 312                         usbhs_mod_call(priv, irq_attch, priv, &irq_state);
 313
 314                 if (irq_state.intsts1 & DTCH)
 315                         usbhs_mod_call(priv, irq_dtch, priv, &irq_state);
 316
 317                 if (irq_state.intsts1 & SIGN)
 318                         usbhs_mod_call(priv, irq_sign, priv, &irq_state);
 319
 320                 if (irq_state.intsts1 & SACK)
 321                         usbhs_mod_call(priv, irq_sack, priv, &irq_state);
 322         }
 323         return IRQ_HANDLED;
 324 }
 325
 326 void usbhs_irq_callback_update(struct usbhs_priv *priv, struct usbhs_mod *mod)
 327 {
 328         u16 intenb0 = 0;
 329         u16 intenb1 = 0;
 330         struct usbhs_mod_info *info = usbhs_priv_to_modinfo(priv);
 331
 332         /*
 333          * BEMPENB/BRDYENB are picky.
 334          * below method is required
 335          *
 336          *  - clear  INTSTS0
 337          *  - update BEMPENB/BRDYENB
 338          *  - update INTSTS0
 339          */
 340         usbhs_write(priv, INTENB0, 0);
 341         if (usbhs_mod_is_host(priv))
 342                 usbhs_write(priv, INTENB1, 0);
 343
 344         usbhs_write(priv, BEMPENB, 0);
 345         usbhs_write(priv, BRDYENB, 0);
 346
 347         /*
 348          * see also
 349          *      usbhs_interrupt
 350          */
 351
 352         /*
 353          * it don't enable DVSE (intenb0) here
 354          * but "mod->irq_dev_state" will be called.
 355          */
 356         if (info->irq_vbus)
 357                 intenb0 |= VBSE;
 358
 359         if (mod) {
 360                 /*
 361                  * INTSTS0
 362                  */
 363                 if (mod->irq_ctrl_stage)
 364                         intenb0 |= CTRE;
 365
 366                 if (mod->irq_empty && mod->irq_bempsts) {
 367                         usbhs_write(priv, BEMPENB, mod->irq_bempsts);
 368                         intenb0 |= BEMPE;
 369                 }
 370
 371                 if (mod->irq_ready && mod->irq_brdysts) {
 372                         usbhs_write(priv, BRDYENB, mod->irq_brdysts);
 373                         intenb0 |= BRDYE;
 374                 }
 375
 376                 if (usbhs_mod_is_host(priv)) {
 377                         /*
 378                          * INTSTS1
 379                          */
 380                         if (mod->irq_attch)
 381                                 intenb1 |= ATTCHE;
 382
 383                         if (mod->irq_dtch)
 384                                 intenb1 |= DTCHE;
 385
 386                         if (mod->irq_sign)
 387                                 intenb1 |= SIGNE;
 388
 389                         if (mod->irq_sack)
 390                                 intenb1 |= SACKE;
 391                 }
 392         }
 393
 394         if (intenb0)
 395                 usbhs_write(priv, INTENB0, intenb0);
 396
 397         if (usbhs_mod_is_host(priv) && intenb1)
 398                 usbhs_write(priv, INTENB1, intenb1);
 399 }