drivers/mtd/devices/sst25l.c

   1 /*
   2  * sst25l.c
   3  *
   4  * Driver for SST25L SPI Flash chips
   5  *
   6  * Copyright © 2009 Bluewater Systems Ltd
   7  * Author: Andre Renaud <[email protected]>
   8  * Author: Ryan Mallon
   9  *
  10  * Based on m25p80.c
  11  *
  12  * This code is free software; you can redistribute it and/or modify
  13  * it under the terms of the GNU General Public License version 2 as
  14  * published by the Free Software Foundation.
  15  *
  16  */
  17
  18 #include <linux/module.h>
  19 #include <linux/device.h>
  20 #include <linux/mutex.h>
  21 #include <linux/interrupt.h>
  22 #include <linux/slab.h>
  23 #include <linux/sched.h>
  24
  25 #include <linux/mtd/mtd.h>
  26 #include <linux/mtd/partitions.h>
  27
  28 #include <linux/spi/spi.h>
  29 #include <linux/spi/flash.h>
  30
  31 /* Erases can take up to 3 seconds! */
  32 #define MAX_READY_WAIT_JIFFIES  msecs_to_jiffies(3000)
  33
  34 #define SST25L_CMD_WRSR         0x01    /* Write status register */
  35 #define SST25L_CMD_WRDI         0x04    /* Write disable */
  36 #define SST25L_CMD_RDSR         0x05    /* Read status register */
  37 #define SST25L_CMD_WREN         0x06    /* Write enable */
  38 #define SST25L_CMD_READ         0x03    /* High speed read */
  39
  40 #define SST25L_CMD_EWSR         0x50    /* Enable write status register */
  41 #define SST25L_CMD_SECTOR_ERASE 0x20    /* Erase sector */
  42 #define SST25L_CMD_READ_ID      0x90    /* Read device ID */
  43 #define SST25L_CMD_AAI_PROGRAM  0xaf    /* Auto address increment */
  44
  45 #define SST25L_STATUS_BUSY      (1 << 0)        /* Chip is busy */
  46 #define SST25L_STATUS_WREN      (1 << 1)        /* Write enabled */
  47 #define SST25L_STATUS_BP0       (1 << 2)        /* Block protection 0 */
  48 #define SST25L_STATUS_BP1       (1 << 3)        /* Block protection 1 */
  49
  50 struct sst25l_flash {
  51         struct spi_device       *spi;
  52         struct mutex            lock;
  53         struct mtd_info         mtd;
  54 };
  55
  56 struct flash_info {
  57         const char              *name;
  58         uint16_t                device_id;
  59         unsigned                page_size;
  60         unsigned                nr_pages;
  61         unsigned                erase_size;
  62 };
  63
  64 #define to_sst25l_flash(x) container_of(x, struct sst25l_flash, mtd)
  65
  66 static struct flash_info sst25l_flash_info[] = {
  67         {"sst25lf020a", 0xbf43, 256, 1024, 4096},
  68         {"sst25lf040a", 0xbf44, 256, 2048, 4096},
  69 };
  70
  71 static int sst25l_status(struct sst25l_flash *flash, int *status)
  72 {
  73         struct spi_message m;
  74         struct spi_transfer t;
  75         unsigned char cmd_resp[2];
  76         int err;
  77
  78         spi_message_init(&m);
  79         memset(&t, 0, sizeof(struct spi_transfer));
  80
  81         cmd_resp[0] = SST25L_CMD_RDSR;
  82         cmd_resp[1] = 0xff;
  83         t.tx_buf = cmd_resp;
  84         t.rx_buf = cmd_resp;
  85         t.len = sizeof(cmd_resp);
  86         spi_message_add_tail(&t, &m);
  87         err = spi_sync(flash->spi, &m);
  88         if (err < 0)
  89                 return err;
  90
  91         *status = cmd_resp[1];
  92         return 0;
  93 }
  94
  95 static int sst25l_write_enable(struct sst25l_flash *flash, int enable)
  96 {
  97         unsigned char command[2];
  98         int status, err;
  99
 100         command[0] = enable ? SST25L_CMD_WREN : SST25L_CMD_WRDI;
 101         err = spi_write(flash->spi, command, 1);
 102         if (err)
 103                 return err;
 104
 105         command[0] = SST25L_CMD_EWSR;
 106         err = spi_write(flash->spi, command, 1);
 107         if (err)
 108                 return err;
 109
 110         command[0] = SST25L_CMD_WRSR;
 111         command[1] = enable ? 0 : SST25L_STATUS_BP0 | SST25L_STATUS_BP1;
 112         err = spi_write(flash->spi, command, 2);
 113         if (err)
 114                 return err;
 115
 116         if (enable) {
 117                 err = sst25l_status(flash, &status);
 118                 if (err)
 119                         return err;
 120                 if (!(status & SST25L_STATUS_WREN))
 121                         return -EROFS;
 122         }
 123
 124         return 0;
 125 }
 126
 127 static int sst25l_wait_till_ready(struct sst25l_flash *flash)
 128 {
 129         unsigned long deadline;
 130         int status, err;
 131
 132         deadline = jiffies + MAX_READY_WAIT_JIFFIES;
 133         do {
 134                 err = sst25l_status(flash, &status);
 135                 if (err)
 136                         return err;
 137                 if (!(status & SST25L_STATUS_BUSY))
 138                         return 0;
 139
 140                 cond_resched();
 141         } while (!time_after_eq(jiffies, deadline));
 142
 143         return -ETIMEDOUT;
 144 }
 145
 146 static int sst25l_erase_sector(struct sst25l_flash *flash, uint32_t offset)
 147 {
 148         unsigned char command[4];
 149         int err;
 150
 151         err = sst25l_write_enable(flash, 1);
 152         if (err)
 153                 return err;
 154
 155         command[0] = SST25L_CMD_SECTOR_ERASE;
 156         command[1] = offset >> 16;
 157         command[2] = offset >> 8;
 158         command[3] = offset;
 159         err = spi_write(flash->spi, command, 4);
 160         if (err)
 161                 return err;
 162
 163         err = sst25l_wait_till_ready(flash);
 164         if (err)
 165                 return err;
 166
 167         return sst25l_write_enable(flash, 0);
 168 }
 169
 170 static int sst25l_erase(struct mtd_info *mtd, struct erase_info *instr)
 171 {
 172         struct sst25l_flash *flash = to_sst25l_flash(mtd);
 173         uint32_t addr, end;
 174         int err;
 175
 176         /* Sanity checks */
 177         if ((uint32_t)instr->len % mtd->erasesize)
 178                 return -EINVAL;
 179
 180         if ((uint32_t)instr->addr % mtd->erasesize)
 181                 return -EINVAL;
 182
 183         addr = instr->addr;
 184         end = addr + instr->len;
 185
 186         mutex_lock(&flash->lock);
 187
 188         err = sst25l_wait_till_ready(flash);
 189         if (err) {
 190                 mutex_unlock(&flash->lock);
 191                 return err;
 192         }
 193
 194         while (addr < end) {
 195                 err = sst25l_erase_sector(flash, addr);
 196                 if (err) {
 197                         mutex_unlock(&flash->lock);
 198                         instr->state = MTD_ERASE_FAILED;
 199                         dev_err(&flash->spi->dev, "Erase failed\n");
 200                         return err;
 201                 }
 202
 203                 addr += mtd->erasesize;
 204         }
 205
 206         mutex_unlock(&flash->lock);
 207
 208         instr->state = MTD_ERASE_DONE;
 209         mtd_erase_callback(instr);
 210         return 0;
 211 }
 212
 213 static int sst25l_read(struct mtd_info *mtd, loff_t from, size_t len,
 214                        size_t *retlen, unsigned char *buf)
 215 {
 216         struct sst25l_flash *flash = to_sst25l_flash(mtd);
 217         struct spi_transfer transfer[2];
 218         struct spi_message message;
 219         unsigned char command[4];
 220         int ret;
 221
 222         spi_message_init(&message);
 223         memset(&transfer, 0, sizeof(transfer));
 224
 225         command[0] = SST25L_CMD_READ;
 226         command[1] = from >> 16;
 227         command[2] = from >> 8;
 228         command[3] = from;
 229
 230         transfer[0].tx_buf = command;
 231         transfer[0].len = sizeof(command);
 232         spi_message_add_tail(&transfer[0], &message);
 233
 234         transfer[1].rx_buf = buf;
 235         transfer[1].len = len;
 236         spi_message_add_tail(&transfer[1], &message);
 237
 238         mutex_lock(&flash->lock);
 239
 240         /* Wait for previous write/erase to complete */
 241         ret = sst25l_wait_till_ready(flash);
 242         if (ret) {
 243                 mutex_unlock(&flash->lock);
 244                 return ret;
 245         }
 246
 247         spi_sync(flash->spi, &message);
 248
 249         if (retlen && message.actual_length > sizeof(command))
 250                 *retlen += message.actual_length - sizeof(command);
 251
 252         mutex_unlock(&flash->lock);
 253         return 0;
 254 }
 255
 256 static int sst25l_write(struct mtd_info *mtd, loff_t to, size_t len,
 257                         size_t *retlen, const unsigned char *buf)
 258 {
 259         struct sst25l_flash *flash = to_sst25l_flash(mtd);
 260         int i, j, ret, bytes, copied = 0;
 261         unsigned char command[5];
 262
 263         if ((uint32_t)to % mtd->writesize)
 264                 return -EINVAL;
 265
 266         mutex_lock(&flash->lock);
 267
 268         ret = sst25l_write_enable(flash, 1);
 269         if (ret)
 270                 goto out;
 271
 272         for (i = 0; i < len; i += mtd->writesize) {
 273                 ret = sst25l_wait_till_ready(flash);
 274                 if (ret)
 275                         goto out;
 276
 277                 /* Write the first byte of the page */
 278                 command[0] = SST25L_CMD_AAI_PROGRAM;
 279                 command[1] = (to + i) >> 16;
 280                 command[2] = (to + i) >> 8;
 281                 command[3] = (to + i);
 282                 command[4] = buf[i];
 283                 ret = spi_write(flash->spi, command, 5);
 284                 if (ret < 0)
 285                         goto out;
 286                 copied++;
 287
 288                 /*
 289                  * Write the remaining bytes using auto address
 290                  * increment mode
 291                  */
 292                 bytes = min_t(uint32_t, mtd->writesize, len - i);
 293                 for (j = 1; j < bytes; j++, copied++) {
 294                         ret = sst25l_wait_till_ready(flash);
 295                         if (ret)
 296                                 goto out;
 297
 298                         command[1] = buf[i + j];
 299                         ret = spi_write(flash->spi, command, 2);
 300                         if (ret)
 301                                 goto out;
 302                 }
 303         }
 304
 305 out:
 306         ret = sst25l_write_enable(flash, 0);
 307
 308         if (retlen)
 309                 *retlen = copied;
 310
 311         mutex_unlock(&flash->lock);
 312         return ret;
 313 }
 314
 315 static struct flash_info *sst25l_match_device(struct spi_device *spi)
 316 {
 317         struct flash_info *flash_info = NULL;
 318         struct spi_message m;
 319         struct spi_transfer t;
 320         unsigned char cmd_resp[6];
 321         int i, err;
 322         uint16_t id;
 323
 324         spi_message_init(&m);
 325         memset(&t, 0, sizeof(struct spi_transfer));
 326
 327         cmd_resp[0] = SST25L_CMD_READ_ID;
 328         cmd_resp[1] = 0;
 329         cmd_resp[2] = 0;
 330         cmd_resp[3] = 0;
 331         cmd_resp[4] = 0xff;
 332         cmd_resp[5] = 0xff;
 333         t.tx_buf = cmd_resp;
 334         t.rx_buf = cmd_resp;
 335         t.len = sizeof(cmd_resp);
 336         spi_message_add_tail(&t, &m);
 337         err = spi_sync(spi, &m);
 338         if (err < 0) {
 339                 dev_err(&spi->dev, "error reading device id\n");
 340                 return NULL;
 341         }
 342
 343         id = (cmd_resp[4] << 8) | cmd_resp[5];
 344
 345         for (i = 0; i < ARRAY_SIZE(sst25l_flash_info); i++)
 346                 if (sst25l_flash_info[i].device_id == id)
 347                         flash_info = &sst25l_flash_info[i];
 348
 349         if (!flash_info)
 350                 dev_err(&spi->dev, "unknown id %.4x\n", id);
 351
 352         return flash_info;
 353 }
 354
 355 static int sst25l_probe(struct spi_device *spi)
 356 {
 357         struct flash_info *flash_info;
 358         struct sst25l_flash *flash;
 359         struct flash_platform_data *data;
 360         int ret;
 361
 362         flash_info = sst25l_match_device(spi);
 363         if (!flash_info)
 364                 return -ENODEV;
 365
 366         flash = devm_kzalloc(&spi->dev, sizeof(*flash), GFP_KERNEL);
 367         if (!flash)
 368                 return -ENOMEM;
 369
 370         flash->spi = spi;
 371         mutex_init(&flash->lock);
 372         spi_set_drvdata(spi, flash);
 373
 374         data = dev_get_platdata(&spi->dev);
 375         if (data && data->name)
 376                 flash->mtd.name = data->name;
 377         else
 378                 flash->mtd.name = dev_name(&spi->dev);
 379
 380         flash->mtd.type         = MTD_NORFLASH;
 381         flash->mtd.flags        = MTD_CAP_NORFLASH;
 382         flash->mtd.erasesize    = flash_info->erase_size;
 383         flash->mtd.writesize    = flash_info->page_size;
 384         flash->mtd.writebufsize = flash_info->page_size;
 385         flash->mtd.size         = flash_info->page_size * flash_info->nr_pages;
 386         flash->mtd._erase       = sst25l_erase;
 387         flash->mtd._read                = sst25l_read;
 388         flash->mtd._write       = sst25l_write;
 389
 390         dev_info(&spi->dev, "%s (%lld KiB)\n", flash_info->name,
 391                  (long long)flash->mtd.size >> 10);
 392
 393         pr_debug("mtd .name = %s, .size = 0x%llx (%lldMiB) "
 394               ".erasesize = 0x%.8x (%uKiB) .numeraseregions = %d\n",
 395               flash->mtd.name,
 396               (long long)flash->mtd.size, (long long)(flash->mtd.size >> 20),
 397               flash->mtd.erasesize, flash->mtd.erasesize / 1024,
 398               flash->mtd.numeraseregions);
 399
 400
 401         ret = mtd_device_parse_register(&flash->mtd, NULL, NULL,
 402                                         data ? data->parts : NULL,
 403                                         data ? data->nr_parts : 0);
 404         if (ret)
 405                 return -ENODEV;
 406
 407         return 0;
 408 }
 409
 410 static int sst25l_remove(struct spi_device *spi)
 411 {
 412         struct sst25l_flash *flash = spi_get_drvdata(spi);
 413
 414         return mtd_device_unregister(&flash->mtd);
 415 }
 416
 417 static struct spi_driver sst25l_driver = {
 418         .driver = {
 419                 .name   = "sst25l",
 420                 .owner  = THIS_MODULE,
 421         },
 422         .probe          = sst25l_probe,
 423         .remove         = sst25l_remove,
 424 };
 425
 426 module_spi_driver(sst25l_driver);
 427
 428 MODULE_DESCRIPTION("MTD SPI driver for SST25L Flash chips");
 429 MODULE_AUTHOR("Andre Renaud <[email protected]>, "
 430               "Ryan Mallon");
 431 MODULE_LICENSE("GPL");