2 * Copyright 2000-2015 Avago Technologies. All rights reserved.
6 * Title: MPI Configuration messages and pages
7 * Creation Date: November 10, 2006
9 * mpi2_cnfg.h Version: 02.00.33
11 * NOTE: Names (typedefs, defines, etc.) beginning with an MPI25 or Mpi25
12 * prefix are for use only on MPI v2.5 products, and must not be used
13 * with MPI v2.0 products. Unless otherwise noted, names beginning with
14 * MPI2 or Mpi2 are for use with both MPI v2.0 and MPI v2.5 products.
19 * Date Version Description
20 * -------- -------- ------------------------------------------------------
21 * 04-30-07 02.00.00 Corresponds to Fusion-MPT MPI Specification Rev A.
22 * 06-04-07 02.00.01 Added defines for SAS IO Unit Page 2 PhyFlags.
23 * Added Manufacturing Page 11.
24 * Added MPI2_SAS_EXPANDER0_FLAGS_CONNECTOR_END_DEVICE
26 * 06-26-07 02.00.02 Adding generic structure for product-specific
27 * Manufacturing pages: MPI2_CONFIG_PAGE_MANUFACTURING_PS.
28 * Rework of BIOS Page 2 configuration page.
29 * Fixed MPI2_BIOSPAGE2_BOOT_DEVICE to be a union of the
31 * Added configuration pages IOC Page 8 and Driver
32 * Persistent Mapping Page 0.
33 * 08-31-07 02.00.03 Modified configuration pages dealing with Integrated
34 * RAID (Manufacturing Page 4, RAID Volume Pages 0 and 1,
35 * RAID Physical Disk Pages 0 and 1, RAID Configuration
37 * Added new value for AccessStatus field of SAS Device
38 * Page 0 (_SATA_NEEDS_INITIALIZATION).
39 * 10-31-07 02.00.04 Added missing SEPDevHandle field to
40 * MPI2_CONFIG_PAGE_SAS_ENCLOSURE_0.
41 * 12-18-07 02.00.05 Modified IO Unit Page 0 to use 32-bit version fields for
43 * Modified IOC Page 7 to use masks and added field for
44 * SASBroadcastPrimitiveMasks.
45 * Added MPI2_CONFIG_PAGE_BIOS_4.
46 * Added MPI2_CONFIG_PAGE_LOG_0.
47 * 02-29-08 02.00.06 Modified various names to make them 32-character unique.
48 * Added SAS Device IDs.
49 * Updated Integrated RAID configuration pages including
50 * Manufacturing Page 4, IOC Page 6, and RAID Configuration
52 * 05-21-08 02.00.07 Added define MPI2_MANPAGE4_MIX_SSD_SAS_SATA.
53 * Added define MPI2_MANPAGE4_PHYSDISK_128MB_COERCION.
54 * Fixed define MPI2_IOCPAGE8_FLAGS_ENCLOSURE_SLOT_MAPPING.
55 * Added missing MaxNumRoutedSasAddresses field to
56 * MPI2_CONFIG_PAGE_EXPANDER_0.
57 * Added SAS Port Page 0.
58 * Modified structure layout for
59 * MPI2_CONFIG_PAGE_DRIVER_MAPPING_0.
60 * 06-27-08 02.00.08 Changed MPI2_CONFIG_PAGE_RD_PDISK_1 to use
61 * MPI2_RAID_PHYS_DISK1_PATH_MAX to size the array.
62 * 10-02-08 02.00.09 Changed MPI2_RAID_PGAD_CONFIGNUM_MASK from 0x0000FFFF
64 * Added two new values for the Physical Disk Coercion Size
65 * bits in the Flags field of Manufacturing Page 4.
66 * Added product-specific Manufacturing pages 16 to 31.
67 * Modified Flags bits for controlling write cache on SATA
68 * drives in IO Unit Page 1.
69 * Added new bit to AdditionalControlFlags of SAS IO Unit
70 * Page 1 to control Invalid Topology Correction.
71 * Added additional defines for RAID Volume Page 0
72 * VolumeStatusFlags field.
73 * Modified meaning of RAID Volume Page 0 VolumeSettings
74 * define for auto-configure of hot-swap drives.
75 * Added SupportedPhysDisks field to RAID Volume Page 1 and
76 * added related defines.
77 * Added PhysDiskAttributes field (and related defines) to
78 * RAID Physical Disk Page 0.
79 * Added MPI2_SAS_PHYINFO_PHY_VACANT define.
80 * Added three new DiscoveryStatus bits for SAS IO Unit
81 * Page 0 and SAS Expander Page 0.
82 * Removed multiplexing information from SAS IO Unit pages.
83 * Added BootDeviceWaitTime field to SAS IO Unit Page 4.
84 * Removed Zone Address Resolved bit from PhyInfo and from
85 * Expander Page 0 Flags field.
86 * Added two new AccessStatus values to SAS Device Page 0
87 * for indicating routing problems. Added 3 reserved words
89 * 01-19-09 02.00.10 Fixed defines for GPIOVal field of IO Unit Page 3.
90 * Inserted missing reserved field into structure for IOC
92 * Added more pending task bits to RAID Volume Page 0
93 * VolumeStatusFlags defines.
94 * Added MPI2_PHYSDISK0_STATUS_FLAG_NOT_CERTIFIED define.
95 * Added a new DiscoveryStatus bit for SAS IO Unit Page 0
96 * and SAS Expander Page 0 to flag a downstream initiator
97 * when in simplified routing mode.
98 * Removed SATA Init Failure defines for DiscoveryStatus
99 * fields of SAS IO Unit Page 0 and SAS Expander Page 0.
100 * Added MPI2_SAS_DEVICE0_ASTATUS_DEVICE_BLOCKED define.
101 * Added PortGroups, DmaGroup, and ControlGroup fields to
103 * 05-06-09 02.00.11 Added structures and defines for IO Unit Page 5 and IO
105 * Added expander reduced functionality data to SAS
107 * Added SAS PHY Page 2 and SAS PHY Page 3.
108 * 07-30-09 02.00.12 Added IO Unit Page 7.
109 * Added new device ids.
110 * Added SAS IO Unit Page 5.
111 * Added partial and slumber power management capable flags
112 * to SAS Device Page 0 Flags field.
113 * Added PhyInfo defines for power condition.
114 * Added Ethernet configuration pages.
115 * 10-28-09 02.00.13 Added MPI2_IOUNITPAGE1_ENABLE_HOST_BASED_DISCOVERY.
116 * Added SAS PHY Page 4 structure and defines.
117 * 02-10-10 02.00.14 Modified the comments for the configuration page
118 * structures that contain an array of data. The host
119 * should use the "count" field in the page data (e.g. the
120 * NumPhys field) to determine the number of valid elements
122 * Added/modified some MPI2_MFGPAGE_DEVID_SAS defines.
123 * Added PowerManagementCapabilities to IO Unit Page 7.
124 * Added PortWidthModGroup field to
125 * MPI2_SAS_IO_UNIT5_PHY_PM_SETTINGS.
126 * Added MPI2_CONFIG_PAGE_SASIOUNIT_6 and related defines.
127 * Added MPI2_CONFIG_PAGE_SASIOUNIT_7 and related defines.
128 * Added MPI2_CONFIG_PAGE_SASIOUNIT_8 and related defines.
129 * 05-12-10 02.00.15 Added MPI2_RAIDVOL0_STATUS_FLAG_VOL_NOT_CONSISTENT
131 * Added MPI2_PHYSDISK0_INCOMPATIBLE_MEDIA_TYPE define.
132 * Added MPI2_SAS_NEG_LINK_RATE_UNSUPPORTED_PHY define.
133 * 08-11-10 02.00.16 Removed IO Unit Page 1 device path (multi-pathing)
135 * 11-10-10 02.00.17 Added ReceptacleID field (replacing Reserved1) to
136 * MPI2_MANPAGE7_CONNECTOR_INFO and reworked defines for
138 * Added BoardTemperature and BoardTemperatureUnits fields
139 * to MPI2_CONFIG_PAGE_IO_UNIT_7.
140 * Added MPI2_CONFIG_EXTPAGETYPE_EXT_MANUFACTURING define
141 * and MPI2_CONFIG_PAGE_EXT_MAN_PS structure.
142 * 02-23-11 02.00.18 Added ProxyVF_ID field to MPI2_CONFIG_REQUEST.
143 * Added IO Unit Page 8, IO Unit Page 9,
144 * and IO Unit Page 10.
145 * Added SASNotifyPrimitiveMasks field to
146 * MPI2_CONFIG_PAGE_IOC_7.
147 * 03-09-11 02.00.19 Fixed IO Unit Page 10 (to match the spec).
148 * 05-25-11 02.00.20 Cleaned up a few comments.
149 * 08-24-11 02.00.21 Marked the IO Unit Page 7 PowerManagementCapabilities
150 * for PCIe link as obsolete.
151 * Added SpinupFlags field containing a Disable Spin-up bit
152 * to the MPI2_SAS_IOUNIT4_SPINUP_GROUP fields of SAS IO
154 * 11-18-11 02.00.22 Added define MPI2_IOCPAGE6_CAP_FLAGS_4K_SECTORS_SUPPORT.
155 * Added UEFIVersion field to BIOS Page 1 and defined new
157 * Incorporating additions for MPI v2.5.
158 * 11-27-12 02.00.23 Added MPI2_MANPAGE7_FLAG_EVENTREPLAY_SLOT_ORDER.
159 * Added MPI2_BIOSPAGE1_OPTIONS_MASK_OEM_ID.
160 * 12-20-12 02.00.24 Marked MPI2_SASIOUNIT1_CONTROL_CLEAR_AFFILIATION as
161 * obsolete for MPI v2.5 and later.
162 * Added some defines for 12G SAS speeds.
163 * 04-09-13 02.00.25 Added MPI2_IOUNITPAGE1_ATA_SECURITY_FREEZE_LOCK.
164 * Fixed MPI2_IOUNITPAGE5_DMA_CAP_MASK_MAX_REQUESTS to
165 * match the specification.
166 * 08-19-13 02.00.26 Added reserved words to MPI2_CONFIG_PAGE_IO_UNIT_7 for
168 * 12-05-13 02.00.27 Added MPI2_MANPAGE7_FLAG_BASE_ENCLOSURE_LEVEL for
169 * MPI2_CONFIG_PAGE_MAN_7.
170 * Added EnclosureLevel and ConnectorName fields to
171 * MPI2_CONFIG_PAGE_SAS_DEV_0.
172 * Added MPI2_SAS_DEVICE0_FLAGS_ENCL_LEVEL_VALID for
173 * MPI2_CONFIG_PAGE_SAS_DEV_0.
174 * Added EnclosureLevel field to
175 * MPI2_CONFIG_PAGE_SAS_ENCLOSURE_0.
176 * Added MPI2_SAS_ENCLS0_FLAGS_ENCL_LEVEL_VALID for
177 * MPI2_CONFIG_PAGE_SAS_ENCLOSURE_0.
178 * 01-08-14 02.00.28 Added more defines for the BiosOptions field of
179 * MPI2_CONFIG_PAGE_BIOS_1.
180 * 06-13-14 02.00.29 Added SSUTimeout field to MPI2_CONFIG_PAGE_BIOS_1, and
181 * more defines for the BiosOptions field.
182 * 11-18-14 02.00.30 Updated copyright information.
183 * Added MPI2_BIOSPAGE1_OPTIONS_ADVANCED_CONFIG.
184 * Added AdapterOrderAux fields to BIOS Page 3.
185 * 03-16-15 02.00.31 Updated for MPI v2.6.
186 * Added new SAS Phy Event codes
187 * 05-25-15 02.00.33 Added more defines for the BiosOptions field of
188 * MPI2_CONFIG_PAGE_BIOS_1.
189 * --------------------------------------------------------------------------
195 /*****************************************************************************
196 * Configuration Page Header and defines
197 *****************************************************************************/
199 /*Config Page Header */
200 typedef struct _MPI2_CONFIG_PAGE_HEADER {
201 U8 PageVersion; /*0x00 */
202 U8 PageLength; /*0x01 */
203 U8 PageNumber; /*0x02 */
204 U8 PageType; /*0x03 */
205 } MPI2_CONFIG_PAGE_HEADER, *PTR_MPI2_CONFIG_PAGE_HEADER,
206 Mpi2ConfigPageHeader_t, *pMpi2ConfigPageHeader_t;
208 typedef union _MPI2_CONFIG_PAGE_HEADER_UNION {
209 MPI2_CONFIG_PAGE_HEADER Struct;
213 } MPI2_CONFIG_PAGE_HEADER_UNION, *PTR_MPI2_CONFIG_PAGE_HEADER_UNION,
214 Mpi2ConfigPageHeaderUnion, *pMpi2ConfigPageHeaderUnion;
216 /*Extended Config Page Header */
217 typedef struct _MPI2_CONFIG_EXTENDED_PAGE_HEADER {
218 U8 PageVersion; /*0x00 */
219 U8 Reserved1; /*0x01 */
220 U8 PageNumber; /*0x02 */
221 U8 PageType; /*0x03 */
222 U16 ExtPageLength; /*0x04 */
223 U8 ExtPageType; /*0x06 */
224 U8 Reserved2; /*0x07 */
225 } MPI2_CONFIG_EXTENDED_PAGE_HEADER,
226 *PTR_MPI2_CONFIG_EXTENDED_PAGE_HEADER,
227 Mpi2ConfigExtendedPageHeader_t,
228 *pMpi2ConfigExtendedPageHeader_t;
230 typedef union _MPI2_CONFIG_EXT_PAGE_HEADER_UNION {
231 MPI2_CONFIG_PAGE_HEADER Struct;
232 MPI2_CONFIG_EXTENDED_PAGE_HEADER Ext;
236 } MPI2_CONFIG_EXT_PAGE_HEADER_UNION,
237 *PTR_MPI2_CONFIG_EXT_PAGE_HEADER_UNION,
238 Mpi2ConfigPageExtendedHeaderUnion,
239 *pMpi2ConfigPageExtendedHeaderUnion;
242 /*PageType field values */
243 #define MPI2_CONFIG_PAGEATTR_READ_ONLY (0x00)
244 #define MPI2_CONFIG_PAGEATTR_CHANGEABLE (0x10)
245 #define MPI2_CONFIG_PAGEATTR_PERSISTENT (0x20)
246 #define MPI2_CONFIG_PAGEATTR_MASK (0xF0)
248 #define MPI2_CONFIG_PAGETYPE_IO_UNIT (0x00)
249 #define MPI2_CONFIG_PAGETYPE_IOC (0x01)
250 #define MPI2_CONFIG_PAGETYPE_BIOS (0x02)
251 #define MPI2_CONFIG_PAGETYPE_RAID_VOLUME (0x08)
252 #define MPI2_CONFIG_PAGETYPE_MANUFACTURING (0x09)
253 #define MPI2_CONFIG_PAGETYPE_RAID_PHYSDISK (0x0A)
254 #define MPI2_CONFIG_PAGETYPE_EXTENDED (0x0F)
255 #define MPI2_CONFIG_PAGETYPE_MASK (0x0F)
257 #define MPI2_CONFIG_TYPENUM_MASK (0x0FFF)
260 /*ExtPageType field values */
261 #define MPI2_CONFIG_EXTPAGETYPE_SAS_IO_UNIT (0x10)
262 #define MPI2_CONFIG_EXTPAGETYPE_SAS_EXPANDER (0x11)
263 #define MPI2_CONFIG_EXTPAGETYPE_SAS_DEVICE (0x12)
264 #define MPI2_CONFIG_EXTPAGETYPE_SAS_PHY (0x13)
265 #define MPI2_CONFIG_EXTPAGETYPE_LOG (0x14)
266 #define MPI2_CONFIG_EXTPAGETYPE_ENCLOSURE (0x15)
267 #define MPI2_CONFIG_EXTPAGETYPE_RAID_CONFIG (0x16)
268 #define MPI2_CONFIG_EXTPAGETYPE_DRIVER_MAPPING (0x17)
269 #define MPI2_CONFIG_EXTPAGETYPE_SAS_PORT (0x18)
270 #define MPI2_CONFIG_EXTPAGETYPE_ETHERNET (0x19)
271 #define MPI2_CONFIG_EXTPAGETYPE_EXT_MANUFACTURING (0x1A)
274 /*****************************************************************************
275 * PageAddress defines
276 *****************************************************************************/
278 /*RAID Volume PageAddress format */
279 #define MPI2_RAID_VOLUME_PGAD_FORM_MASK (0xF0000000)
280 #define MPI2_RAID_VOLUME_PGAD_FORM_GET_NEXT_HANDLE (0x00000000)
281 #define MPI2_RAID_VOLUME_PGAD_FORM_HANDLE (0x10000000)
283 #define MPI2_RAID_VOLUME_PGAD_HANDLE_MASK (0x0000FFFF)
286 /*RAID Physical Disk PageAddress format */
287 #define MPI2_PHYSDISK_PGAD_FORM_MASK (0xF0000000)
288 #define MPI2_PHYSDISK_PGAD_FORM_GET_NEXT_PHYSDISKNUM (0x00000000)
289 #define MPI2_PHYSDISK_PGAD_FORM_PHYSDISKNUM (0x10000000)
290 #define MPI2_PHYSDISK_PGAD_FORM_DEVHANDLE (0x20000000)
292 #define MPI2_PHYSDISK_PGAD_PHYSDISKNUM_MASK (0x000000FF)
293 #define MPI2_PHYSDISK_PGAD_DEVHANDLE_MASK (0x0000FFFF)
296 /*SAS Expander PageAddress format */
297 #define MPI2_SAS_EXPAND_PGAD_FORM_MASK (0xF0000000)
298 #define MPI2_SAS_EXPAND_PGAD_FORM_GET_NEXT_HNDL (0x00000000)
299 #define MPI2_SAS_EXPAND_PGAD_FORM_HNDL_PHY_NUM (0x10000000)
300 #define MPI2_SAS_EXPAND_PGAD_FORM_HNDL (0x20000000)
302 #define MPI2_SAS_EXPAND_PGAD_HANDLE_MASK (0x0000FFFF)
303 #define MPI2_SAS_EXPAND_PGAD_PHYNUM_MASK (0x00FF0000)
304 #define MPI2_SAS_EXPAND_PGAD_PHYNUM_SHIFT (16)
307 /*SAS Device PageAddress format */
308 #define MPI2_SAS_DEVICE_PGAD_FORM_MASK (0xF0000000)
309 #define MPI2_SAS_DEVICE_PGAD_FORM_GET_NEXT_HANDLE (0x00000000)
310 #define MPI2_SAS_DEVICE_PGAD_FORM_HANDLE (0x20000000)
312 #define MPI2_SAS_DEVICE_PGAD_HANDLE_MASK (0x0000FFFF)
315 /*SAS PHY PageAddress format */
316 #define MPI2_SAS_PHY_PGAD_FORM_MASK (0xF0000000)
317 #define MPI2_SAS_PHY_PGAD_FORM_PHY_NUMBER (0x00000000)
318 #define MPI2_SAS_PHY_PGAD_FORM_PHY_TBL_INDEX (0x10000000)
320 #define MPI2_SAS_PHY_PGAD_PHY_NUMBER_MASK (0x000000FF)
321 #define MPI2_SAS_PHY_PGAD_PHY_TBL_INDEX_MASK (0x0000FFFF)
324 /*SAS Port PageAddress format */
325 #define MPI2_SASPORT_PGAD_FORM_MASK (0xF0000000)
326 #define MPI2_SASPORT_PGAD_FORM_GET_NEXT_PORT (0x00000000)
327 #define MPI2_SASPORT_PGAD_FORM_PORT_NUM (0x10000000)
329 #define MPI2_SASPORT_PGAD_PORTNUMBER_MASK (0x00000FFF)
332 /*SAS Enclosure PageAddress format */
333 #define MPI2_SAS_ENCLOS_PGAD_FORM_MASK (0xF0000000)
334 #define MPI2_SAS_ENCLOS_PGAD_FORM_GET_NEXT_HANDLE (0x00000000)
335 #define MPI2_SAS_ENCLOS_PGAD_FORM_HANDLE (0x10000000)
337 #define MPI2_SAS_ENCLOS_PGAD_HANDLE_MASK (0x0000FFFF)
340 /*RAID Configuration PageAddress format */
341 #define MPI2_RAID_PGAD_FORM_MASK (0xF0000000)
342 #define MPI2_RAID_PGAD_FORM_GET_NEXT_CONFIGNUM (0x00000000)
343 #define MPI2_RAID_PGAD_FORM_CONFIGNUM (0x10000000)
344 #define MPI2_RAID_PGAD_FORM_ACTIVE_CONFIG (0x20000000)
346 #define MPI2_RAID_PGAD_CONFIGNUM_MASK (0x000000FF)
349 /*Driver Persistent Mapping PageAddress format */
350 #define MPI2_DPM_PGAD_FORM_MASK (0xF0000000)
351 #define MPI2_DPM_PGAD_FORM_ENTRY_RANGE (0x00000000)
353 #define MPI2_DPM_PGAD_ENTRY_COUNT_MASK (0x0FFF0000)
354 #define MPI2_DPM_PGAD_ENTRY_COUNT_SHIFT (16)
355 #define MPI2_DPM_PGAD_START_ENTRY_MASK (0x0000FFFF)
358 /*Ethernet PageAddress format */
359 #define MPI2_ETHERNET_PGAD_FORM_MASK (0xF0000000)
360 #define MPI2_ETHERNET_PGAD_FORM_IF_NUM (0x00000000)
362 #define MPI2_ETHERNET_PGAD_IF_NUMBER_MASK (0x000000FF)
365 /****************************************************************************
366 * Configuration messages
367 ****************************************************************************/
369 /*Configuration Request Message */
370 typedef struct _MPI2_CONFIG_REQUEST {
372 U8 SGLFlags; /*0x01 */
373 U8 ChainOffset; /*0x02 */
374 U8 Function; /*0x03 */
375 U16 ExtPageLength; /*0x04 */
376 U8 ExtPageType; /*0x06 */
377 U8 MsgFlags; /*0x07 */
380 U16 Reserved1; /*0x0A */
381 U8 Reserved2; /*0x0C */
382 U8 ProxyVF_ID; /*0x0D */
383 U16 Reserved4; /*0x0E */
384 U32 Reserved3; /*0x10 */
385 MPI2_CONFIG_PAGE_HEADER Header; /*0x14 */
386 U32 PageAddress; /*0x18 */
387 MPI2_SGE_IO_UNION PageBufferSGE; /*0x1C */
388 } MPI2_CONFIG_REQUEST, *PTR_MPI2_CONFIG_REQUEST,
389 Mpi2ConfigRequest_t, *pMpi2ConfigRequest_t;
391 /*values for the Action field */
392 #define MPI2_CONFIG_ACTION_PAGE_HEADER (0x00)
393 #define MPI2_CONFIG_ACTION_PAGE_READ_CURRENT (0x01)
394 #define MPI2_CONFIG_ACTION_PAGE_WRITE_CURRENT (0x02)
395 #define MPI2_CONFIG_ACTION_PAGE_DEFAULT (0x03)
396 #define MPI2_CONFIG_ACTION_PAGE_WRITE_NVRAM (0x04)
397 #define MPI2_CONFIG_ACTION_PAGE_READ_DEFAULT (0x05)
398 #define MPI2_CONFIG_ACTION_PAGE_READ_NVRAM (0x06)
399 #define MPI2_CONFIG_ACTION_PAGE_GET_CHANGEABLE (0x07)
401 /*use MPI2_SGLFLAGS_ defines from mpi2.h for the SGLFlags field */
404 /*Config Reply Message */
405 typedef struct _MPI2_CONFIG_REPLY {
407 U8 SGLFlags; /*0x01 */
408 U8 MsgLength; /*0x02 */
409 U8 Function; /*0x03 */
410 U16 ExtPageLength; /*0x04 */
411 U8 ExtPageType; /*0x06 */
412 U8 MsgFlags; /*0x07 */
415 U16 Reserved1; /*0x0A */
416 U16 Reserved2; /*0x0C */
417 U16 IOCStatus; /*0x0E */
418 U32 IOCLogInfo; /*0x10 */
419 MPI2_CONFIG_PAGE_HEADER Header; /*0x14 */
420 } MPI2_CONFIG_REPLY, *PTR_MPI2_CONFIG_REPLY,
421 Mpi2ConfigReply_t, *pMpi2ConfigReply_t;
425 /*****************************************************************************
427 * C o n f i g u r a t i o n P a g e s
429 *****************************************************************************/
431 /****************************************************************************
432 * Manufacturing Config pages
433 ****************************************************************************/
435 #define MPI2_MFGPAGE_VENDORID_LSI (0x1000)
437 /*MPI v2.0 SAS products */
438 #define MPI2_MFGPAGE_DEVID_SAS2004 (0x0070)
439 #define MPI2_MFGPAGE_DEVID_SAS2008 (0x0072)
440 #define MPI2_MFGPAGE_DEVID_SAS2108_1 (0x0074)
441 #define MPI2_MFGPAGE_DEVID_SAS2108_2 (0x0076)
442 #define MPI2_MFGPAGE_DEVID_SAS2108_3 (0x0077)
443 #define MPI2_MFGPAGE_DEVID_SAS2116_1 (0x0064)
444 #define MPI2_MFGPAGE_DEVID_SAS2116_2 (0x0065)
446 #define MPI2_MFGPAGE_DEVID_SSS6200 (0x007E)
448 #define MPI2_MFGPAGE_DEVID_SAS2208_1 (0x0080)
449 #define MPI2_MFGPAGE_DEVID_SAS2208_2 (0x0081)
450 #define MPI2_MFGPAGE_DEVID_SAS2208_3 (0x0082)
451 #define MPI2_MFGPAGE_DEVID_SAS2208_4 (0x0083)
452 #define MPI2_MFGPAGE_DEVID_SAS2208_5 (0x0084)
453 #define MPI2_MFGPAGE_DEVID_SAS2208_6 (0x0085)
454 #define MPI2_MFGPAGE_DEVID_SAS2308_1 (0x0086)
455 #define MPI2_MFGPAGE_DEVID_SAS2308_2 (0x0087)
456 #define MPI2_MFGPAGE_DEVID_SAS2308_3 (0x006E)
458 /*MPI v2.5 SAS products */
459 #define MPI25_MFGPAGE_DEVID_SAS3004 (0x0096)
460 #define MPI25_MFGPAGE_DEVID_SAS3008 (0x0097)
461 #define MPI25_MFGPAGE_DEVID_SAS3108_1 (0x0090)
462 #define MPI25_MFGPAGE_DEVID_SAS3108_2 (0x0091)
463 #define MPI25_MFGPAGE_DEVID_SAS3108_5 (0x0094)
464 #define MPI25_MFGPAGE_DEVID_SAS3108_6 (0x0095)
466 /* MPI v2.6 SAS Products */
467 #define MPI26_MFGPAGE_DEVID_SAS3216 (0x00C9)
468 #define MPI26_MFGPAGE_DEVID_SAS3224 (0x00C4)
469 #define MPI26_MFGPAGE_DEVID_SAS3316_1 (0x00C5)
470 #define MPI26_MFGPAGE_DEVID_SAS3316_2 (0x00C6)
471 #define MPI26_MFGPAGE_DEVID_SAS3316_3 (0x00C7)
472 #define MPI26_MFGPAGE_DEVID_SAS3316_4 (0x00C8)
473 #define MPI26_MFGPAGE_DEVID_SAS3324_1 (0x00C0)
474 #define MPI26_MFGPAGE_DEVID_SAS3324_2 (0x00C1)
475 #define MPI26_MFGPAGE_DEVID_SAS3324_3 (0x00C2)
476 #define MPI26_MFGPAGE_DEVID_SAS3324_4 (0x00C3)
478 /*Manufacturing Page 0 */
480 typedef struct _MPI2_CONFIG_PAGE_MAN_0 {
481 MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */
482 U8 ChipName[16]; /*0x04 */
483 U8 ChipRevision[8]; /*0x14 */
484 U8 BoardName[16]; /*0x1C */
485 U8 BoardAssembly[16]; /*0x2C */
486 U8 BoardTracerNumber[16]; /*0x3C */
487 } MPI2_CONFIG_PAGE_MAN_0,
488 *PTR_MPI2_CONFIG_PAGE_MAN_0,
489 Mpi2ManufacturingPage0_t,
490 *pMpi2ManufacturingPage0_t;
492 #define MPI2_MANUFACTURING0_PAGEVERSION (0x00)
495 /*Manufacturing Page 1 */
497 typedef struct _MPI2_CONFIG_PAGE_MAN_1 {
498 MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */
499 U8 VPD[256]; /*0x04 */
500 } MPI2_CONFIG_PAGE_MAN_1,
501 *PTR_MPI2_CONFIG_PAGE_MAN_1,
502 Mpi2ManufacturingPage1_t,
503 *pMpi2ManufacturingPage1_t;
505 #define MPI2_MANUFACTURING1_PAGEVERSION (0x00)
508 typedef struct _MPI2_CHIP_REVISION_ID {
509 U16 DeviceID; /*0x00 */
510 U8 PCIRevisionID; /*0x02 */
511 U8 Reserved; /*0x03 */
512 } MPI2_CHIP_REVISION_ID, *PTR_MPI2_CHIP_REVISION_ID,
513 Mpi2ChipRevisionId_t, *pMpi2ChipRevisionId_t;
516 /*Manufacturing Page 2 */
519 *Host code (drivers, BIOS, utilities, etc.) should leave this define set to
520 *one and check Header.PageLength at runtime.
522 #ifndef MPI2_MAN_PAGE_2_HW_SETTINGS_WORDS
523 #define MPI2_MAN_PAGE_2_HW_SETTINGS_WORDS (1)
526 typedef struct _MPI2_CONFIG_PAGE_MAN_2 {
527 MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */
528 MPI2_CHIP_REVISION_ID ChipId; /*0x04 */
530 HwSettings[MPI2_MAN_PAGE_2_HW_SETTINGS_WORDS];/*0x08 */
531 } MPI2_CONFIG_PAGE_MAN_2,
532 *PTR_MPI2_CONFIG_PAGE_MAN_2,
533 Mpi2ManufacturingPage2_t,
534 *pMpi2ManufacturingPage2_t;
536 #define MPI2_MANUFACTURING2_PAGEVERSION (0x00)
539 /*Manufacturing Page 3 */
542 *Host code (drivers, BIOS, utilities, etc.) should leave this define set to
543 *one and check Header.PageLength at runtime.
545 #ifndef MPI2_MAN_PAGE_3_INFO_WORDS
546 #define MPI2_MAN_PAGE_3_INFO_WORDS (1)
549 typedef struct _MPI2_CONFIG_PAGE_MAN_3 {
550 MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */
551 MPI2_CHIP_REVISION_ID ChipId; /*0x04 */
553 Info[MPI2_MAN_PAGE_3_INFO_WORDS];/*0x08 */
554 } MPI2_CONFIG_PAGE_MAN_3,
555 *PTR_MPI2_CONFIG_PAGE_MAN_3,
556 Mpi2ManufacturingPage3_t,
557 *pMpi2ManufacturingPage3_t;
559 #define MPI2_MANUFACTURING3_PAGEVERSION (0x00)
562 /*Manufacturing Page 4 */
564 typedef struct _MPI2_MANPAGE4_PWR_SAVE_SETTINGS {
565 U8 PowerSaveFlags; /*0x00 */
566 U8 InternalOperationsSleepTime; /*0x01 */
567 U8 InternalOperationsRunTime; /*0x02 */
568 U8 HostIdleTime; /*0x03 */
569 } MPI2_MANPAGE4_PWR_SAVE_SETTINGS,
570 *PTR_MPI2_MANPAGE4_PWR_SAVE_SETTINGS,
571 Mpi2ManPage4PwrSaveSettings_t,
572 *pMpi2ManPage4PwrSaveSettings_t;
574 /*defines for the PowerSaveFlags field */
575 #define MPI2_MANPAGE4_MASK_POWERSAVE_MODE (0x03)
576 #define MPI2_MANPAGE4_POWERSAVE_MODE_DISABLED (0x00)
577 #define MPI2_MANPAGE4_CUSTOM_POWERSAVE_MODE (0x01)
578 #define MPI2_MANPAGE4_FULL_POWERSAVE_MODE (0x02)
580 typedef struct _MPI2_CONFIG_PAGE_MAN_4 {
581 MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */
582 U32 Reserved1; /*0x04 */
584 U8 InquirySize; /*0x0C */
585 U8 Reserved2; /*0x0D */
586 U16 Reserved3; /*0x0E */
587 U8 InquiryData[56]; /*0x10 */
588 U32 RAID0VolumeSettings; /*0x48 */
589 U32 RAID1EVolumeSettings; /*0x4C */
590 U32 RAID1VolumeSettings; /*0x50 */
591 U32 RAID10VolumeSettings; /*0x54 */
592 U32 Reserved4; /*0x58 */
593 U32 Reserved5; /*0x5C */
594 MPI2_MANPAGE4_PWR_SAVE_SETTINGS PowerSaveSettings; /*0x60 */
595 U8 MaxOCEDisks; /*0x64 */
596 U8 ResyncRate; /*0x65 */
597 U16 DataScrubDuration; /*0x66 */
598 U8 MaxHotSpares; /*0x68 */
599 U8 MaxPhysDisksPerVol; /*0x69 */
600 U8 MaxPhysDisks; /*0x6A */
601 U8 MaxVolumes; /*0x6B */
602 } MPI2_CONFIG_PAGE_MAN_4,
603 *PTR_MPI2_CONFIG_PAGE_MAN_4,
604 Mpi2ManufacturingPage4_t,
605 *pMpi2ManufacturingPage4_t;
607 #define MPI2_MANUFACTURING4_PAGEVERSION (0x0A)
609 /*Manufacturing Page 4 Flags field */
610 #define MPI2_MANPAGE4_METADATA_SIZE_MASK (0x00030000)
611 #define MPI2_MANPAGE4_METADATA_512MB (0x00000000)
613 #define MPI2_MANPAGE4_MIX_SSD_SAS_SATA (0x00008000)
614 #define MPI2_MANPAGE4_MIX_SSD_AND_NON_SSD (0x00004000)
615 #define MPI2_MANPAGE4_HIDE_PHYSDISK_NON_IR (0x00002000)
617 #define MPI2_MANPAGE4_MASK_PHYSDISK_COERCION (0x00001C00)
618 #define MPI2_MANPAGE4_PHYSDISK_COERCION_1GB (0x00000000)
619 #define MPI2_MANPAGE4_PHYSDISK_128MB_COERCION (0x00000400)
620 #define MPI2_MANPAGE4_PHYSDISK_ADAPTIVE_COERCION (0x00000800)
621 #define MPI2_MANPAGE4_PHYSDISK_ZERO_COERCION (0x00000C00)
623 #define MPI2_MANPAGE4_MASK_BAD_BLOCK_MARKING (0x00000300)
624 #define MPI2_MANPAGE4_DEFAULT_BAD_BLOCK_MARKING (0x00000000)
625 #define MPI2_MANPAGE4_TABLE_BAD_BLOCK_MARKING (0x00000100)
626 #define MPI2_MANPAGE4_WRITE_LONG_BAD_BLOCK_MARKING (0x00000200)
628 #define MPI2_MANPAGE4_FORCE_OFFLINE_FAILOVER (0x00000080)
629 #define MPI2_MANPAGE4_RAID10_DISABLE (0x00000040)
630 #define MPI2_MANPAGE4_RAID1E_DISABLE (0x00000020)
631 #define MPI2_MANPAGE4_RAID1_DISABLE (0x00000010)
632 #define MPI2_MANPAGE4_RAID0_DISABLE (0x00000008)
633 #define MPI2_MANPAGE4_IR_MODEPAGE8_DISABLE (0x00000004)
634 #define MPI2_MANPAGE4_IM_RESYNC_CACHE_ENABLE (0x00000002)
635 #define MPI2_MANPAGE4_IR_NO_MIX_SAS_SATA (0x00000001)
638 /*Manufacturing Page 5 */
641 *Host code (drivers, BIOS, utilities, etc.) should leave this define set to
642 *one and check the value returned for NumPhys at runtime.
644 #ifndef MPI2_MAN_PAGE_5_PHY_ENTRIES
645 #define MPI2_MAN_PAGE_5_PHY_ENTRIES (1)
648 typedef struct _MPI2_MANUFACTURING5_ENTRY {
650 U64 DeviceName; /*0x08 */
651 } MPI2_MANUFACTURING5_ENTRY,
652 *PTR_MPI2_MANUFACTURING5_ENTRY,
653 Mpi2Manufacturing5Entry_t,
654 *pMpi2Manufacturing5Entry_t;
656 typedef struct _MPI2_CONFIG_PAGE_MAN_5 {
657 MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */
658 U8 NumPhys; /*0x04 */
659 U8 Reserved1; /*0x05 */
660 U16 Reserved2; /*0x06 */
661 U32 Reserved3; /*0x08 */
662 U32 Reserved4; /*0x0C */
663 MPI2_MANUFACTURING5_ENTRY
664 Phy[MPI2_MAN_PAGE_5_PHY_ENTRIES];/*0x08 */
665 } MPI2_CONFIG_PAGE_MAN_5,
666 *PTR_MPI2_CONFIG_PAGE_MAN_5,
667 Mpi2ManufacturingPage5_t,
668 *pMpi2ManufacturingPage5_t;
670 #define MPI2_MANUFACTURING5_PAGEVERSION (0x03)
673 /*Manufacturing Page 6 */
675 typedef struct _MPI2_CONFIG_PAGE_MAN_6 {
676 MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */
677 U32 ProductSpecificInfo;/*0x04 */
678 } MPI2_CONFIG_PAGE_MAN_6,
679 *PTR_MPI2_CONFIG_PAGE_MAN_6,
680 Mpi2ManufacturingPage6_t,
681 *pMpi2ManufacturingPage6_t;
683 #define MPI2_MANUFACTURING6_PAGEVERSION (0x00)
686 /*Manufacturing Page 7 */
688 typedef struct _MPI2_MANPAGE7_CONNECTOR_INFO {
689 U32 Pinout; /*0x00 */
690 U8 Connector[16]; /*0x04 */
691 U8 Location; /*0x14 */
692 U8 ReceptacleID; /*0x15 */
694 U32 Reserved2; /*0x18 */
695 } MPI2_MANPAGE7_CONNECTOR_INFO,
696 *PTR_MPI2_MANPAGE7_CONNECTOR_INFO,
697 Mpi2ManPage7ConnectorInfo_t,
698 *pMpi2ManPage7ConnectorInfo_t;
700 /*defines for the Pinout field */
701 #define MPI2_MANPAGE7_PINOUT_LANE_MASK (0x0000FF00)
702 #define MPI2_MANPAGE7_PINOUT_LANE_SHIFT (8)
704 #define MPI2_MANPAGE7_PINOUT_TYPE_MASK (0x000000FF)
705 #define MPI2_MANPAGE7_PINOUT_TYPE_UNKNOWN (0x00)
706 #define MPI2_MANPAGE7_PINOUT_SATA_SINGLE (0x01)
707 #define MPI2_MANPAGE7_PINOUT_SFF_8482 (0x02)
708 #define MPI2_MANPAGE7_PINOUT_SFF_8486 (0x03)
709 #define MPI2_MANPAGE7_PINOUT_SFF_8484 (0x04)
710 #define MPI2_MANPAGE7_PINOUT_SFF_8087 (0x05)
711 #define MPI2_MANPAGE7_PINOUT_SFF_8643_4I (0x06)
712 #define MPI2_MANPAGE7_PINOUT_SFF_8643_8I (0x07)
713 #define MPI2_MANPAGE7_PINOUT_SFF_8470 (0x08)
714 #define MPI2_MANPAGE7_PINOUT_SFF_8088 (0x09)
715 #define MPI2_MANPAGE7_PINOUT_SFF_8644_4X (0x0A)
716 #define MPI2_MANPAGE7_PINOUT_SFF_8644_8X (0x0B)
717 #define MPI2_MANPAGE7_PINOUT_SFF_8644_16X (0x0C)
718 #define MPI2_MANPAGE7_PINOUT_SFF_8436 (0x0D)
720 /*defines for the Location field */
721 #define MPI2_MANPAGE7_LOCATION_UNKNOWN (0x01)
722 #define MPI2_MANPAGE7_LOCATION_INTERNAL (0x02)
723 #define MPI2_MANPAGE7_LOCATION_EXTERNAL (0x04)
724 #define MPI2_MANPAGE7_LOCATION_SWITCHABLE (0x08)
725 #define MPI2_MANPAGE7_LOCATION_AUTO (0x10)
726 #define MPI2_MANPAGE7_LOCATION_NOT_PRESENT (0x20)
727 #define MPI2_MANPAGE7_LOCATION_NOT_CONNECTED (0x80)
730 *Host code (drivers, BIOS, utilities, etc.) should leave this define set to
731 *one and check the value returned for NumPhys at runtime.
733 #ifndef MPI2_MANPAGE7_CONNECTOR_INFO_MAX
734 #define MPI2_MANPAGE7_CONNECTOR_INFO_MAX (1)
737 typedef struct _MPI2_CONFIG_PAGE_MAN_7 {
738 MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */
739 U32 Reserved1; /*0x04 */
740 U32 Reserved2; /*0x08 */
742 U8 EnclosureName[16]; /*0x10 */
743 U8 NumPhys; /*0x20 */
744 U8 Reserved3; /*0x21 */
745 U16 Reserved4; /*0x22 */
746 MPI2_MANPAGE7_CONNECTOR_INFO
747 ConnectorInfo[MPI2_MANPAGE7_CONNECTOR_INFO_MAX]; /*0x24 */
748 } MPI2_CONFIG_PAGE_MAN_7,
749 *PTR_MPI2_CONFIG_PAGE_MAN_7,
750 Mpi2ManufacturingPage7_t,
751 *pMpi2ManufacturingPage7_t;
753 #define MPI2_MANUFACTURING7_PAGEVERSION (0x01)
755 /*defines for the Flags field */
756 #define MPI2_MANPAGE7_FLAG_BASE_ENCLOSURE_LEVEL (0x00000008)
757 #define MPI2_MANPAGE7_FLAG_EVENTREPLAY_SLOT_ORDER (0x00000002)
758 #define MPI2_MANPAGE7_FLAG_USE_SLOT_INFO (0x00000001)
762 *Generic structure to use for product-specific manufacturing pages
763 *(currently Manufacturing Page 8 through Manufacturing Page 31).
766 typedef struct _MPI2_CONFIG_PAGE_MAN_PS {
767 MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */
768 U32 ProductSpecificInfo;/*0x04 */
769 } MPI2_CONFIG_PAGE_MAN_PS,
770 *PTR_MPI2_CONFIG_PAGE_MAN_PS,
771 Mpi2ManufacturingPagePS_t,
772 *pMpi2ManufacturingPagePS_t;
774 #define MPI2_MANUFACTURING8_PAGEVERSION (0x00)
775 #define MPI2_MANUFACTURING9_PAGEVERSION (0x00)
776 #define MPI2_MANUFACTURING10_PAGEVERSION (0x00)
777 #define MPI2_MANUFACTURING11_PAGEVERSION (0x00)
778 #define MPI2_MANUFACTURING12_PAGEVERSION (0x00)
779 #define MPI2_MANUFACTURING13_PAGEVERSION (0x00)
780 #define MPI2_MANUFACTURING14_PAGEVERSION (0x00)
781 #define MPI2_MANUFACTURING15_PAGEVERSION (0x00)
782 #define MPI2_MANUFACTURING16_PAGEVERSION (0x00)
783 #define MPI2_MANUFACTURING17_PAGEVERSION (0x00)
784 #define MPI2_MANUFACTURING18_PAGEVERSION (0x00)
785 #define MPI2_MANUFACTURING19_PAGEVERSION (0x00)
786 #define MPI2_MANUFACTURING20_PAGEVERSION (0x00)
787 #define MPI2_MANUFACTURING21_PAGEVERSION (0x00)
788 #define MPI2_MANUFACTURING22_PAGEVERSION (0x00)
789 #define MPI2_MANUFACTURING23_PAGEVERSION (0x00)
790 #define MPI2_MANUFACTURING24_PAGEVERSION (0x00)
791 #define MPI2_MANUFACTURING25_PAGEVERSION (0x00)
792 #define MPI2_MANUFACTURING26_PAGEVERSION (0x00)
793 #define MPI2_MANUFACTURING27_PAGEVERSION (0x00)
794 #define MPI2_MANUFACTURING28_PAGEVERSION (0x00)
795 #define MPI2_MANUFACTURING29_PAGEVERSION (0x00)
796 #define MPI2_MANUFACTURING30_PAGEVERSION (0x00)
797 #define MPI2_MANUFACTURING31_PAGEVERSION (0x00)
800 /****************************************************************************
801 * IO Unit Config Pages
802 ****************************************************************************/
806 typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_0 {
807 MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */
808 U64 UniqueValue; /*0x04 */
809 MPI2_VERSION_UNION NvdataVersionDefault; /*0x08 */
810 MPI2_VERSION_UNION NvdataVersionPersistent; /*0x0A */
811 } MPI2_CONFIG_PAGE_IO_UNIT_0,
812 *PTR_MPI2_CONFIG_PAGE_IO_UNIT_0,
813 Mpi2IOUnitPage0_t, *pMpi2IOUnitPage0_t;
815 #define MPI2_IOUNITPAGE0_PAGEVERSION (0x02)
820 typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_1 {
821 MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */
823 } MPI2_CONFIG_PAGE_IO_UNIT_1,
824 *PTR_MPI2_CONFIG_PAGE_IO_UNIT_1,
825 Mpi2IOUnitPage1_t, *pMpi2IOUnitPage1_t;
827 #define MPI2_IOUNITPAGE1_PAGEVERSION (0x04)
829 /*IO Unit Page 1 Flags defines */
830 #define MPI2_IOUNITPAGE1_ATA_SECURITY_FREEZE_LOCK (0x00004000)
831 #define MPI25_IOUNITPAGE1_NEW_DEVICE_FAST_PATH_DISABLE (0x00002000)
832 #define MPI25_IOUNITPAGE1_DISABLE_FAST_PATH (0x00001000)
833 #define MPI2_IOUNITPAGE1_ENABLE_HOST_BASED_DISCOVERY (0x00000800)
834 #define MPI2_IOUNITPAGE1_MASK_SATA_WRITE_CACHE (0x00000600)
835 #define MPI2_IOUNITPAGE1_SATA_WRITE_CACHE_SHIFT (9)
836 #define MPI2_IOUNITPAGE1_ENABLE_SATA_WRITE_CACHE (0x00000000)
837 #define MPI2_IOUNITPAGE1_DISABLE_SATA_WRITE_CACHE (0x00000200)
838 #define MPI2_IOUNITPAGE1_UNCHANGED_SATA_WRITE_CACHE (0x00000400)
839 #define MPI2_IOUNITPAGE1_NATIVE_COMMAND_Q_DISABLE (0x00000100)
840 #define MPI2_IOUNITPAGE1_DISABLE_IR (0x00000040)
841 #define MPI2_IOUNITPAGE1_DISABLE_TASK_SET_FULL_HANDLING (0x00000020)
842 #define MPI2_IOUNITPAGE1_IR_USE_STATIC_VOLUME_ID (0x00000004)
848 *Host code (drivers, BIOS, utilities, etc.) should leave this define set to
849 *one and check the value returned for GPIOCount at runtime.
851 #ifndef MPI2_IO_UNIT_PAGE_3_GPIO_VAL_MAX
852 #define MPI2_IO_UNIT_PAGE_3_GPIO_VAL_MAX (1)
855 typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_3 {
856 MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */
857 U8 GPIOCount; /*0x04 */
858 U8 Reserved1; /*0x05 */
859 U16 Reserved2; /*0x06 */
861 GPIOVal[MPI2_IO_UNIT_PAGE_3_GPIO_VAL_MAX];/*0x08 */
862 } MPI2_CONFIG_PAGE_IO_UNIT_3,
863 *PTR_MPI2_CONFIG_PAGE_IO_UNIT_3,
864 Mpi2IOUnitPage3_t, *pMpi2IOUnitPage3_t;
866 #define MPI2_IOUNITPAGE3_PAGEVERSION (0x01)
868 /*defines for IO Unit Page 3 GPIOVal field */
869 #define MPI2_IOUNITPAGE3_GPIO_FUNCTION_MASK (0xFFFC)
870 #define MPI2_IOUNITPAGE3_GPIO_FUNCTION_SHIFT (2)
871 #define MPI2_IOUNITPAGE3_GPIO_SETTING_OFF (0x0000)
872 #define MPI2_IOUNITPAGE3_GPIO_SETTING_ON (0x0001)
878 *Upper layer code (drivers, utilities, etc.) should leave this define set to
879 *one and check the value returned for NumDmaEngines at runtime.
881 #ifndef MPI2_IOUNITPAGE5_DMAENGINE_ENTRIES
882 #define MPI2_IOUNITPAGE5_DMAENGINE_ENTRIES (1)
885 typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_5 {
886 MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */
888 RaidAcceleratorBufferBaseAddress; /*0x04 */
890 RaidAcceleratorBufferSize; /*0x0C */
892 RaidAcceleratorControlBaseAddress; /*0x14 */
893 U8 RAControlSize; /*0x1C */
894 U8 NumDmaEngines; /*0x1D */
895 U8 RAMinControlSize; /*0x1E */
896 U8 RAMaxControlSize; /*0x1F */
897 U32 Reserved1; /*0x20 */
898 U32 Reserved2; /*0x24 */
899 U32 Reserved3; /*0x28 */
901 DmaEngineCapabilities[MPI2_IOUNITPAGE5_DMAENGINE_ENTRIES]; /*0x2C */
902 } MPI2_CONFIG_PAGE_IO_UNIT_5,
903 *PTR_MPI2_CONFIG_PAGE_IO_UNIT_5,
904 Mpi2IOUnitPage5_t, *pMpi2IOUnitPage5_t;
906 #define MPI2_IOUNITPAGE5_PAGEVERSION (0x00)
908 /*defines for IO Unit Page 5 DmaEngineCapabilities field */
909 #define MPI2_IOUNITPAGE5_DMA_CAP_MASK_MAX_REQUESTS (0xFFFF0000)
910 #define MPI2_IOUNITPAGE5_DMA_CAP_SHIFT_MAX_REQUESTS (16)
912 #define MPI2_IOUNITPAGE5_DMA_CAP_EEDP (0x0008)
913 #define MPI2_IOUNITPAGE5_DMA_CAP_PARITY_GENERATION (0x0004)
914 #define MPI2_IOUNITPAGE5_DMA_CAP_HASHING (0x0002)
915 #define MPI2_IOUNITPAGE5_DMA_CAP_ENCRYPTION (0x0001)
920 typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_6 {
921 MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */
923 U8 RAHostControlSize; /*0x06 */
924 U8 Reserved0; /*0x07 */
926 RaidAcceleratorHostControlBaseAddress; /*0x08 */
927 U32 Reserved1; /*0x10 */
928 U32 Reserved2; /*0x14 */
929 U32 Reserved3; /*0x18 */
930 } MPI2_CONFIG_PAGE_IO_UNIT_6,
931 *PTR_MPI2_CONFIG_PAGE_IO_UNIT_6,
932 Mpi2IOUnitPage6_t, *pMpi2IOUnitPage6_t;
934 #define MPI2_IOUNITPAGE6_PAGEVERSION (0x00)
936 /*defines for IO Unit Page 6 Flags field */
937 #define MPI2_IOUNITPAGE6_FLAGS_ENABLE_RAID_ACCELERATOR (0x0001)
942 typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_7 {
943 MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */
944 U8 CurrentPowerMode; /*0x04 */
945 U8 PreviousPowerMode; /*0x05 */
946 U8 PCIeWidth; /*0x06 */
947 U8 PCIeSpeed; /*0x07 */
948 U32 ProcessorState; /*0x08 */
950 PowerManagementCapabilities; /*0x0C */
951 U16 IOCTemperature; /*0x10 */
953 IOCTemperatureUnits; /*0x12 */
954 U8 IOCSpeed; /*0x13 */
955 U16 BoardTemperature; /*0x14 */
957 BoardTemperatureUnits; /*0x16 */
958 U8 Reserved3; /*0x17 */
959 U32 BoardPowerRequirement; /*0x18 */
960 U32 PCISlotPowerAllocation; /*0x1C */
961 U32 Reserved6; /* 0x20 */
962 U32 Reserved7; /* 0x24 */
963 } MPI2_CONFIG_PAGE_IO_UNIT_7,
964 *PTR_MPI2_CONFIG_PAGE_IO_UNIT_7,
965 Mpi2IOUnitPage7_t, *pMpi2IOUnitPage7_t;
967 #define MPI2_IOUNITPAGE7_PAGEVERSION (0x04)
969 /*defines for IO Unit Page 7 CurrentPowerMode and PreviousPowerMode fields */
970 #define MPI25_IOUNITPAGE7_PM_INIT_MASK (0xC0)
971 #define MPI25_IOUNITPAGE7_PM_INIT_UNAVAILABLE (0x00)
972 #define MPI25_IOUNITPAGE7_PM_INIT_HOST (0x40)
973 #define MPI25_IOUNITPAGE7_PM_INIT_IO_UNIT (0x80)
974 #define MPI25_IOUNITPAGE7_PM_INIT_PCIE_DPA (0xC0)
976 #define MPI25_IOUNITPAGE7_PM_MODE_MASK (0x07)
977 #define MPI25_IOUNITPAGE7_PM_MODE_UNAVAILABLE (0x00)
978 #define MPI25_IOUNITPAGE7_PM_MODE_UNKNOWN (0x01)
979 #define MPI25_IOUNITPAGE7_PM_MODE_FULL_POWER (0x04)
980 #define MPI25_IOUNITPAGE7_PM_MODE_REDUCED_POWER (0x05)
981 #define MPI25_IOUNITPAGE7_PM_MODE_STANDBY (0x06)
984 /*defines for IO Unit Page 7 PCIeWidth field */
985 #define MPI2_IOUNITPAGE7_PCIE_WIDTH_X1 (0x01)
986 #define MPI2_IOUNITPAGE7_PCIE_WIDTH_X2 (0x02)
987 #define MPI2_IOUNITPAGE7_PCIE_WIDTH_X4 (0x04)
988 #define MPI2_IOUNITPAGE7_PCIE_WIDTH_X8 (0x08)
990 /*defines for IO Unit Page 7 PCIeSpeed field */
991 #define MPI2_IOUNITPAGE7_PCIE_SPEED_2_5_GBPS (0x00)
992 #define MPI2_IOUNITPAGE7_PCIE_SPEED_5_0_GBPS (0x01)
993 #define MPI2_IOUNITPAGE7_PCIE_SPEED_8_0_GBPS (0x02)
995 /*defines for IO Unit Page 7 ProcessorState field */
996 #define MPI2_IOUNITPAGE7_PSTATE_MASK_SECOND (0x0000000F)
997 #define MPI2_IOUNITPAGE7_PSTATE_SHIFT_SECOND (0)
999 #define MPI2_IOUNITPAGE7_PSTATE_NOT_PRESENT (0x00)
1000 #define MPI2_IOUNITPAGE7_PSTATE_DISABLED (0x01)
1001 #define MPI2_IOUNITPAGE7_PSTATE_ENABLED (0x02)
1003 /*defines for IO Unit Page 7 PowerManagementCapabilities field */
1004 #define MPI25_IOUNITPAGE7_PMCAP_DPA_FULL_PWR_MODE (0x00400000)
1005 #define MPI25_IOUNITPAGE7_PMCAP_DPA_REDUCED_PWR_MODE (0x00200000)
1006 #define MPI25_IOUNITPAGE7_PMCAP_DPA_STANDBY_MODE (0x00100000)
1007 #define MPI25_IOUNITPAGE7_PMCAP_HOST_FULL_PWR_MODE (0x00040000)
1008 #define MPI25_IOUNITPAGE7_PMCAP_HOST_REDUCED_PWR_MODE (0x00020000)
1009 #define MPI25_IOUNITPAGE7_PMCAP_HOST_STANDBY_MODE (0x00010000)
1010 #define MPI25_IOUNITPAGE7_PMCAP_IO_FULL_PWR_MODE (0x00004000)
1011 #define MPI25_IOUNITPAGE7_PMCAP_IO_REDUCED_PWR_MODE (0x00002000)
1012 #define MPI25_IOUNITPAGE7_PMCAP_IO_STANDBY_MODE (0x00001000)
1013 #define MPI2_IOUNITPAGE7_PMCAP_HOST_12_5_PCT_IOCSPEED (0x00000400)
1014 #define MPI2_IOUNITPAGE7_PMCAP_HOST_25_0_PCT_IOCSPEED (0x00000200)
1015 #define MPI2_IOUNITPAGE7_PMCAP_HOST_50_0_PCT_IOCSPEED (0x00000100)
1016 #define MPI25_IOUNITPAGE7_PMCAP_IO_12_5_PCT_IOCSPEED (0x00000040)
1017 #define MPI25_IOUNITPAGE7_PMCAP_IO_25_0_PCT_IOCSPEED (0x00000020)
1018 #define MPI25_IOUNITPAGE7_PMCAP_IO_50_0_PCT_IOCSPEED (0x00000010)
1019 #define MPI2_IOUNITPAGE7_PMCAP_HOST_WIDTH_CHANGE_PCIE (0x00000008)
1020 #define MPI2_IOUNITPAGE7_PMCAP_HOST_SPEED_CHANGE_PCIE (0x00000004)
1021 #define MPI25_IOUNITPAGE7_PMCAP_IO_WIDTH_CHANGE_PCIE (0x00000002)
1022 #define MPI25_IOUNITPAGE7_PMCAP_IO_SPEED_CHANGE_PCIE (0x00000001)
1024 /*obsolete names for the PowerManagementCapabilities bits (above) */
1025 #define MPI2_IOUNITPAGE7_PMCAP_12_5_PCT_IOCSPEED (0x00000400)
1026 #define MPI2_IOUNITPAGE7_PMCAP_25_0_PCT_IOCSPEED (0x00000200)
1027 #define MPI2_IOUNITPAGE7_PMCAP_50_0_PCT_IOCSPEED (0x00000100)
1028 #define MPI2_IOUNITPAGE7_PMCAP_PCIE_WIDTH_CHANGE (0x00000008) /*obsolete */
1029 #define MPI2_IOUNITPAGE7_PMCAP_PCIE_SPEED_CHANGE (0x00000004) /*obsolete */
1032 /*defines for IO Unit Page 7 IOCTemperatureUnits field */
1033 #define MPI2_IOUNITPAGE7_IOC_TEMP_NOT_PRESENT (0x00)
1034 #define MPI2_IOUNITPAGE7_IOC_TEMP_FAHRENHEIT (0x01)
1035 #define MPI2_IOUNITPAGE7_IOC_TEMP_CELSIUS (0x02)
1037 /*defines for IO Unit Page 7 IOCSpeed field */
1038 #define MPI2_IOUNITPAGE7_IOC_SPEED_FULL (0x01)
1039 #define MPI2_IOUNITPAGE7_IOC_SPEED_HALF (0x02)
1040 #define MPI2_IOUNITPAGE7_IOC_SPEED_QUARTER (0x04)
1041 #define MPI2_IOUNITPAGE7_IOC_SPEED_EIGHTH (0x08)
1043 /*defines for IO Unit Page 7 BoardTemperatureUnits field */
1044 #define MPI2_IOUNITPAGE7_BOARD_TEMP_NOT_PRESENT (0x00)
1045 #define MPI2_IOUNITPAGE7_BOARD_TEMP_FAHRENHEIT (0x01)
1046 #define MPI2_IOUNITPAGE7_BOARD_TEMP_CELSIUS (0x02)
1051 #define MPI2_IOUNIT8_NUM_THRESHOLDS (4)
1053 typedef struct _MPI2_IOUNIT8_SENSOR {
1054 U16 Flags; /*0x00 */
1055 U16 Reserved1; /*0x02 */
1057 Threshold[MPI2_IOUNIT8_NUM_THRESHOLDS]; /*0x04 */
1058 U32 Reserved2; /*0x0C */
1059 U32 Reserved3; /*0x10 */
1060 U32 Reserved4; /*0x14 */
1061 } MPI2_IOUNIT8_SENSOR, *PTR_MPI2_IOUNIT8_SENSOR,
1062 Mpi2IOUnit8Sensor_t, *pMpi2IOUnit8Sensor_t;
1064 /*defines for IO Unit Page 8 Sensor Flags field */
1065 #define MPI2_IOUNIT8_SENSOR_FLAGS_T3_ENABLE (0x0008)
1066 #define MPI2_IOUNIT8_SENSOR_FLAGS_T2_ENABLE (0x0004)
1067 #define MPI2_IOUNIT8_SENSOR_FLAGS_T1_ENABLE (0x0002)
1068 #define MPI2_IOUNIT8_SENSOR_FLAGS_T0_ENABLE (0x0001)
1071 *Host code (drivers, BIOS, utilities, etc.) should leave this define set to
1072 *one and check the value returned for NumSensors at runtime.
1074 #ifndef MPI2_IOUNITPAGE8_SENSOR_ENTRIES
1075 #define MPI2_IOUNITPAGE8_SENSOR_ENTRIES (1)
1078 typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_8 {
1079 MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */
1080 U32 Reserved1; /*0x04 */
1081 U32 Reserved2; /*0x08 */
1082 U8 NumSensors; /*0x0C */
1083 U8 PollingInterval; /*0x0D */
1084 U16 Reserved3; /*0x0E */
1086 Sensor[MPI2_IOUNITPAGE8_SENSOR_ENTRIES];/*0x10 */
1087 } MPI2_CONFIG_PAGE_IO_UNIT_8,
1088 *PTR_MPI2_CONFIG_PAGE_IO_UNIT_8,
1089 Mpi2IOUnitPage8_t, *pMpi2IOUnitPage8_t;
1091 #define MPI2_IOUNITPAGE8_PAGEVERSION (0x00)
1096 typedef struct _MPI2_IOUNIT9_SENSOR {
1097 U16 CurrentTemperature; /*0x00 */
1098 U16 Reserved1; /*0x02 */
1100 U8 Reserved2; /*0x05 */
1101 U16 Reserved3; /*0x06 */
1102 U32 Reserved4; /*0x08 */
1103 U32 Reserved5; /*0x0C */
1104 } MPI2_IOUNIT9_SENSOR, *PTR_MPI2_IOUNIT9_SENSOR,
1105 Mpi2IOUnit9Sensor_t, *pMpi2IOUnit9Sensor_t;
1107 /*defines for IO Unit Page 9 Sensor Flags field */
1108 #define MPI2_IOUNIT9_SENSOR_FLAGS_TEMP_VALID (0x01)
1111 *Host code (drivers, BIOS, utilities, etc.) should leave this define set to
1112 *one and check the value returned for NumSensors at runtime.
1114 #ifndef MPI2_IOUNITPAGE9_SENSOR_ENTRIES
1115 #define MPI2_IOUNITPAGE9_SENSOR_ENTRIES (1)
1118 typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_9 {
1119 MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */
1120 U32 Reserved1; /*0x04 */
1121 U32 Reserved2; /*0x08 */
1122 U8 NumSensors; /*0x0C */
1123 U8 Reserved4; /*0x0D */
1124 U16 Reserved3; /*0x0E */
1126 Sensor[MPI2_IOUNITPAGE9_SENSOR_ENTRIES];/*0x10 */
1127 } MPI2_CONFIG_PAGE_IO_UNIT_9,
1128 *PTR_MPI2_CONFIG_PAGE_IO_UNIT_9,
1129 Mpi2IOUnitPage9_t, *pMpi2IOUnitPage9_t;
1131 #define MPI2_IOUNITPAGE9_PAGEVERSION (0x00)
1134 /*IO Unit Page 10 */
1136 typedef struct _MPI2_IOUNIT10_FUNCTION {
1137 U8 CreditPercent; /*0x00 */
1138 U8 Reserved1; /*0x01 */
1139 U16 Reserved2; /*0x02 */
1140 } MPI2_IOUNIT10_FUNCTION,
1141 *PTR_MPI2_IOUNIT10_FUNCTION,
1142 Mpi2IOUnit10Function_t,
1143 *pMpi2IOUnit10Function_t;
1146 *Host code (drivers, BIOS, utilities, etc.) should leave this define set to
1147 *one and check the value returned for NumFunctions at runtime.
1149 #ifndef MPI2_IOUNITPAGE10_FUNCTION_ENTRIES
1150 #define MPI2_IOUNITPAGE10_FUNCTION_ENTRIES (1)
1153 typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_10 {
1154 MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */
1155 U8 NumFunctions; /*0x04 */
1156 U8 Reserved1; /*0x05 */
1157 U16 Reserved2; /*0x06 */
1158 U32 Reserved3; /*0x08 */
1159 U32 Reserved4; /*0x0C */
1160 MPI2_IOUNIT10_FUNCTION
1161 Function[MPI2_IOUNITPAGE10_FUNCTION_ENTRIES];/*0x10 */
1162 } MPI2_CONFIG_PAGE_IO_UNIT_10,
1163 *PTR_MPI2_CONFIG_PAGE_IO_UNIT_10,
1164 Mpi2IOUnitPage10_t, *pMpi2IOUnitPage10_t;
1166 #define MPI2_IOUNITPAGE10_PAGEVERSION (0x01)
1169 /* IO Unit Page 11 (for MPI v2.6 and later) */
1171 typedef struct _MPI26_IOUNIT11_SPINUP_GROUP {
1172 U8 MaxTargetSpinup; /* 0x00 */
1173 U8 SpinupDelay; /* 0x01 */
1174 U8 SpinupFlags; /* 0x02 */
1175 U8 Reserved1; /* 0x03 */
1176 } MPI26_IOUNIT11_SPINUP_GROUP,
1177 *PTR_MPI26_IOUNIT11_SPINUP_GROUP,
1178 Mpi26IOUnit11SpinupGroup_t,
1179 *pMpi26IOUnit11SpinupGroup_t;
1181 /* defines for IO Unit Page 11 SpinupFlags */
1182 #define MPI26_IOUNITPAGE11_SPINUP_DISABLE_FLAG (0x01)
1186 * Host code (drivers, BIOS, utilities, etc.) should leave this define set to
1187 * four and check the value returned for NumPhys at runtime.
1189 #ifndef MPI26_IOUNITPAGE11_PHY_MAX
1190 #define MPI26_IOUNITPAGE11_PHY_MAX (4)
1193 typedef struct _MPI26_CONFIG_PAGE_IO_UNIT_11 {
1194 MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */
1195 U32 Reserved1; /*0x04 */
1196 MPI26_IOUNIT11_SPINUP_GROUP SpinupGroupParameters[4]; /*0x08 */
1197 U32 Reserved2; /*0x18 */
1198 U32 Reserved3; /*0x1C */
1199 U32 Reserved4; /*0x20 */
1200 U8 BootDeviceWaitTime; /*0x24 */
1201 U8 Reserved5; /*0x25 */
1202 U16 Reserved6; /*0x26 */
1203 U8 NumPhys; /*0x28 */
1204 U8 PEInitialSpinupDelay; /*0x29 */
1205 U8 PEReplyDelay; /*0x2A */
1207 U8 PHY[MPI26_IOUNITPAGE11_PHY_MAX];/*0x2C */
1208 } MPI26_CONFIG_PAGE_IO_UNIT_11,
1209 *PTR_MPI26_CONFIG_PAGE_IO_UNIT_11,
1210 Mpi26IOUnitPage11_t,
1211 *pMpi26IOUnitPage11_t;
1213 #define MPI26_IOUNITPAGE11_PAGEVERSION (0x00)
1215 /* defines for Flags field */
1216 #define MPI26_IOUNITPAGE11_FLAGS_AUTO_PORTENABLE (0x01)
1218 /* defines for PHY field */
1219 #define MPI26_IOUNITPAGE11_PHY_SPINUP_GROUP_MASK (0x03)
1226 /****************************************************************************
1228 ****************************************************************************/
1232 typedef struct _MPI2_CONFIG_PAGE_IOC_0 {
1233 MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */
1234 U32 Reserved1; /*0x04 */
1235 U32 Reserved2; /*0x08 */
1236 U16 VendorID; /*0x0C */
1237 U16 DeviceID; /*0x0E */
1238 U8 RevisionID; /*0x10 */
1239 U8 Reserved3; /*0x11 */
1240 U16 Reserved4; /*0x12 */
1241 U32 ClassCode; /*0x14 */
1242 U16 SubsystemVendorID; /*0x18 */
1243 U16 SubsystemID; /*0x1A */
1244 } MPI2_CONFIG_PAGE_IOC_0,
1245 *PTR_MPI2_CONFIG_PAGE_IOC_0,
1246 Mpi2IOCPage0_t, *pMpi2IOCPage0_t;
1248 #define MPI2_IOCPAGE0_PAGEVERSION (0x02)
1253 typedef struct _MPI2_CONFIG_PAGE_IOC_1 {
1254 MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */
1255 U32 Flags; /*0x04 */
1256 U32 CoalescingTimeout; /*0x08 */
1257 U8 CoalescingDepth; /*0x0C */
1258 U8 PCISlotNum; /*0x0D */
1259 U8 PCIBusNum; /*0x0E */
1260 U8 PCIDomainSegment; /*0x0F */
1261 U32 Reserved1; /*0x10 */
1262 U32 Reserved2; /*0x14 */
1263 } MPI2_CONFIG_PAGE_IOC_1,
1264 *PTR_MPI2_CONFIG_PAGE_IOC_1,
1265 Mpi2IOCPage1_t, *pMpi2IOCPage1_t;
1267 #define MPI2_IOCPAGE1_PAGEVERSION (0x05)
1269 /*defines for IOC Page 1 Flags field */
1270 #define MPI2_IOCPAGE1_REPLY_COALESCING (0x00000001)
1272 #define MPI2_IOCPAGE1_PCISLOTNUM_UNKNOWN (0xFF)
1273 #define MPI2_IOCPAGE1_PCIBUSNUM_UNKNOWN (0xFF)
1274 #define MPI2_IOCPAGE1_PCIDOMAIN_UNKNOWN (0xFF)
1278 typedef struct _MPI2_CONFIG_PAGE_IOC_6 {
1279 MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */
1281 CapabilitiesFlags; /*0x04 */
1282 U8 MaxDrivesRAID0; /*0x08 */
1283 U8 MaxDrivesRAID1; /*0x09 */
1285 MaxDrivesRAID1E; /*0x0A */
1287 MaxDrivesRAID10; /*0x0B */
1288 U8 MinDrivesRAID0; /*0x0C */
1289 U8 MinDrivesRAID1; /*0x0D */
1291 MinDrivesRAID1E; /*0x0E */
1293 MinDrivesRAID10; /*0x0F */
1294 U32 Reserved1; /*0x10 */
1296 MaxGlobalHotSpares; /*0x14 */
1297 U8 MaxPhysDisks; /*0x15 */
1298 U8 MaxVolumes; /*0x16 */
1299 U8 MaxConfigs; /*0x17 */
1300 U8 MaxOCEDisks; /*0x18 */
1301 U8 Reserved2; /*0x19 */
1302 U16 Reserved3; /*0x1A */
1304 SupportedStripeSizeMapRAID0; /*0x1C */
1306 SupportedStripeSizeMapRAID1E; /*0x20 */
1308 SupportedStripeSizeMapRAID10; /*0x24 */
1309 U32 Reserved4; /*0x28 */
1310 U32 Reserved5; /*0x2C */
1312 DefaultMetadataSize; /*0x30 */
1313 U16 Reserved6; /*0x32 */
1315 MaxBadBlockTableEntries; /*0x34 */
1316 U16 Reserved7; /*0x36 */
1318 IRNvsramVersion; /*0x38 */
1319 } MPI2_CONFIG_PAGE_IOC_6,
1320 *PTR_MPI2_CONFIG_PAGE_IOC_6,
1321 Mpi2IOCPage6_t, *pMpi2IOCPage6_t;
1323 #define MPI2_IOCPAGE6_PAGEVERSION (0x05)
1325 /*defines for IOC Page 6 CapabilitiesFlags */
1326 #define MPI2_IOCPAGE6_CAP_FLAGS_4K_SECTORS_SUPPORT (0x00000020)
1327 #define MPI2_IOCPAGE6_CAP_FLAGS_RAID10_SUPPORT (0x00000010)
1328 #define MPI2_IOCPAGE6_CAP_FLAGS_RAID1_SUPPORT (0x00000008)
1329 #define MPI2_IOCPAGE6_CAP_FLAGS_RAID1E_SUPPORT (0x00000004)
1330 #define MPI2_IOCPAGE6_CAP_FLAGS_RAID0_SUPPORT (0x00000002)
1331 #define MPI2_IOCPAGE6_CAP_FLAGS_GLOBAL_HOT_SPARE (0x00000001)
1336 #define MPI2_IOCPAGE7_EVENTMASK_WORDS (4)
1338 typedef struct _MPI2_CONFIG_PAGE_IOC_7 {
1339 MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */
1340 U32 Reserved1; /*0x04 */
1342 EventMasks[MPI2_IOCPAGE7_EVENTMASK_WORDS];/*0x08 */
1343 U16 SASBroadcastPrimitiveMasks; /*0x18 */
1344 U16 SASNotifyPrimitiveMasks; /*0x1A */
1345 U32 Reserved3; /*0x1C */
1346 } MPI2_CONFIG_PAGE_IOC_7,
1347 *PTR_MPI2_CONFIG_PAGE_IOC_7,
1348 Mpi2IOCPage7_t, *pMpi2IOCPage7_t;
1350 #define MPI2_IOCPAGE7_PAGEVERSION (0x02)
1355 typedef struct _MPI2_CONFIG_PAGE_IOC_8 {
1356 MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */
1357 U8 NumDevsPerEnclosure; /*0x04 */
1358 U8 Reserved1; /*0x05 */
1359 U16 Reserved2; /*0x06 */
1360 U16 MaxPersistentEntries; /*0x08 */
1361 U16 MaxNumPhysicalMappedIDs; /*0x0A */
1362 U16 Flags; /*0x0C */
1363 U16 Reserved3; /*0x0E */
1364 U16 IRVolumeMappingFlags; /*0x10 */
1365 U16 Reserved4; /*0x12 */
1366 U32 Reserved5; /*0x14 */
1367 } MPI2_CONFIG_PAGE_IOC_8,
1368 *PTR_MPI2_CONFIG_PAGE_IOC_8,
1369 Mpi2IOCPage8_t, *pMpi2IOCPage8_t;
1371 #define MPI2_IOCPAGE8_PAGEVERSION (0x00)
1373 /*defines for IOC Page 8 Flags field */
1374 #define MPI2_IOCPAGE8_FLAGS_DA_START_SLOT_1 (0x00000020)
1375 #define MPI2_IOCPAGE8_FLAGS_RESERVED_TARGETID_0 (0x00000010)
1377 #define MPI2_IOCPAGE8_FLAGS_MASK_MAPPING_MODE (0x0000000E)
1378 #define MPI2_IOCPAGE8_FLAGS_DEVICE_PERSISTENCE_MAPPING (0x00000000)
1379 #define MPI2_IOCPAGE8_FLAGS_ENCLOSURE_SLOT_MAPPING (0x00000002)
1381 #define MPI2_IOCPAGE8_FLAGS_DISABLE_PERSISTENT_MAPPING (0x00000001)
1382 #define MPI2_IOCPAGE8_FLAGS_ENABLE_PERSISTENT_MAPPING (0x00000000)
1384 /*defines for IOC Page 8 IRVolumeMappingFlags */
1385 #define MPI2_IOCPAGE8_IRFLAGS_MASK_VOLUME_MAPPING_MODE (0x00000003)
1386 #define MPI2_IOCPAGE8_IRFLAGS_LOW_VOLUME_MAPPING (0x00000000)
1387 #define MPI2_IOCPAGE8_IRFLAGS_HIGH_VOLUME_MAPPING (0x00000001)
1390 /****************************************************************************
1392 ****************************************************************************/
1396 typedef struct _MPI2_CONFIG_PAGE_BIOS_1 {
1397 MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */
1398 U32 BiosOptions; /*0x04 */
1399 U32 IOCSettings; /*0x08 */
1400 U8 SSUTimeout; /*0x0C */
1401 U8 Reserved1; /*0x0D */
1402 U16 Reserved2; /*0x0E */
1403 U32 DeviceSettings; /*0x10 */
1404 U16 NumberOfDevices; /*0x14 */
1405 U16 UEFIVersion; /*0x16 */
1406 U16 IOTimeoutBlockDevicesNonRM; /*0x18 */
1407 U16 IOTimeoutSequential; /*0x1A */
1408 U16 IOTimeoutOther; /*0x1C */
1409 U16 IOTimeoutBlockDevicesRM; /*0x1E */
1410 } MPI2_CONFIG_PAGE_BIOS_1,
1411 *PTR_MPI2_CONFIG_PAGE_BIOS_1,
1412 Mpi2BiosPage1_t, *pMpi2BiosPage1_t;
1414 #define MPI2_BIOSPAGE1_PAGEVERSION (0x07)
1416 /*values for BIOS Page 1 BiosOptions field */
1417 #define MPI2_BIOSPAGE1_OPTIONS_BOOT_LIST_ADD_ALT_BOOT_DEVICE (0x00008000)
1418 #define MPI2_BIOSPAGE1_OPTIONS_ADVANCED_CONFIG (0x00004000)
1420 #define MPI2_BIOSPAGE1_OPTIONS_PNS_MASK (0x00003800)
1421 #define MPI2_BIOSPAGE1_OPTIONS_PNS_MASK (0x00003800)
1422 #define MPI2_BIOSPAGE1_OPTIONS_PNS_PBDHL (0x00000000)
1423 #define MPI2_BIOSPAGE1_OPTIONS_PNS_ENCSLOSURE (0x00000800)
1424 #define MPI2_BIOSPAGE1_OPTIONS_PNS_LWWID (0x00001000)
1425 #define MPI2_BIOSPAGE1_OPTIONS_PNS_PSENS (0x00001800)
1426 #define MPI2_BIOSPAGE1_OPTIONS_PNS_ESPHY (0x00002000)
1428 #define MPI2_BIOSPAGE1_OPTIONS_X86_DISABLE_BIOS (0x00000400)
1430 #define MPI2_BIOSPAGE1_OPTIONS_MASK_REGISTRATION_UEFI_BSD (0x00000300)
1431 #define MPI2_BIOSPAGE1_OPTIONS_USE_BIT0_REGISTRATION_UEFI_BSD (0x00000000)
1432 #define MPI2_BIOSPAGE1_OPTIONS_FULL_REGISTRATION_UEFI_BSD (0x00000100)
1433 #define MPI2_BIOSPAGE1_OPTIONS_ADAPTER_REGISTRATION_UEFI_BSD (0x00000200)
1434 #define MPI2_BIOSPAGE1_OPTIONS_DISABLE_REGISTRATION_UEFI_BSD (0x00000300)
1436 #define MPI2_BIOSPAGE1_OPTIONS_MASK_OEM_ID (0x000000F0)
1437 #define MPI2_BIOSPAGE1_OPTIONS_LSI_OEM_ID (0x00000000)
1439 #define MPI2_BIOSPAGE1_OPTIONS_MASK_UEFI_HII_REGISTRATION (0x00000006)
1440 #define MPI2_BIOSPAGE1_OPTIONS_ENABLE_UEFI_HII (0x00000000)
1441 #define MPI2_BIOSPAGE1_OPTIONS_DISABLE_UEFI_HII (0x00000002)
1442 #define MPI2_BIOSPAGE1_OPTIONS_VERSION_CHECK_UEFI_HII (0x00000004)
1444 #define MPI2_BIOSPAGE1_OPTIONS_DISABLE_BIOS (0x00000001)
1446 /*values for BIOS Page 1 IOCSettings field */
1447 #define MPI2_BIOSPAGE1_IOCSET_MASK_BOOT_PREFERENCE (0x00030000)
1448 #define MPI2_BIOSPAGE1_IOCSET_ENCLOSURE_SLOT_BOOT (0x00000000)
1449 #define MPI2_BIOSPAGE1_IOCSET_SAS_ADDRESS_BOOT (0x00010000)
1451 #define MPI2_BIOSPAGE1_IOCSET_MASK_RM_SETTING (0x000000C0)
1452 #define MPI2_BIOSPAGE1_IOCSET_NONE_RM_SETTING (0x00000000)
1453 #define MPI2_BIOSPAGE1_IOCSET_BOOT_RM_SETTING (0x00000040)
1454 #define MPI2_BIOSPAGE1_IOCSET_MEDIA_RM_SETTING (0x00000080)
1456 #define MPI2_BIOSPAGE1_IOCSET_MASK_ADAPTER_SUPPORT (0x00000030)
1457 #define MPI2_BIOSPAGE1_IOCSET_NO_SUPPORT (0x00000000)
1458 #define MPI2_BIOSPAGE1_IOCSET_BIOS_SUPPORT (0x00000010)
1459 #define MPI2_BIOSPAGE1_IOCSET_OS_SUPPORT (0x00000020)
1460 #define MPI2_BIOSPAGE1_IOCSET_ALL_SUPPORT (0x00000030)
1462 #define MPI2_BIOSPAGE1_IOCSET_ALTERNATE_CHS (0x00000008)
1464 /*values for BIOS Page 1 DeviceSettings field */
1465 #define MPI2_BIOSPAGE1_DEVSET_DISABLE_SMART_POLLING (0x00000010)
1466 #define MPI2_BIOSPAGE1_DEVSET_DISABLE_SEQ_LUN (0x00000008)
1467 #define MPI2_BIOSPAGE1_DEVSET_DISABLE_RM_LUN (0x00000004)
1468 #define MPI2_BIOSPAGE1_DEVSET_DISABLE_NON_RM_LUN (0x00000002)
1469 #define MPI2_BIOSPAGE1_DEVSET_DISABLE_OTHER_LUN (0x00000001)
1471 /*defines for BIOS Page 1 UEFIVersion field */
1472 #define MPI2_BIOSPAGE1_UEFI_VER_MAJOR_MASK (0xFF00)
1473 #define MPI2_BIOSPAGE1_UEFI_VER_MAJOR_SHIFT (8)
1474 #define MPI2_BIOSPAGE1_UEFI_VER_MINOR_MASK (0x00FF)
1475 #define MPI2_BIOSPAGE1_UEFI_VER_MINOR_SHIFT (0)
1481 typedef struct _MPI2_BOOT_DEVICE_ADAPTER_ORDER {
1482 U32 Reserved1; /*0x00 */
1483 U32 Reserved2; /*0x04 */
1484 U32 Reserved3; /*0x08 */
1485 U32 Reserved4; /*0x0C */
1486 U32 Reserved5; /*0x10 */
1487 U32 Reserved6; /*0x14 */
1488 } MPI2_BOOT_DEVICE_ADAPTER_ORDER,
1489 *PTR_MPI2_BOOT_DEVICE_ADAPTER_ORDER,
1490 Mpi2BootDeviceAdapterOrder_t,
1491 *pMpi2BootDeviceAdapterOrder_t;
1493 typedef struct _MPI2_BOOT_DEVICE_SAS_WWID {
1494 U64 SASAddress; /*0x00 */
1495 U8 LUN[8]; /*0x08 */
1496 U32 Reserved1; /*0x10 */
1497 U32 Reserved2; /*0x14 */
1498 } MPI2_BOOT_DEVICE_SAS_WWID,
1499 *PTR_MPI2_BOOT_DEVICE_SAS_WWID,
1500 Mpi2BootDeviceSasWwid_t,
1501 *pMpi2BootDeviceSasWwid_t;
1503 typedef struct _MPI2_BOOT_DEVICE_ENCLOSURE_SLOT {
1504 U64 EnclosureLogicalID; /*0x00 */
1505 U32 Reserved1; /*0x08 */
1506 U32 Reserved2; /*0x0C */
1507 U16 SlotNumber; /*0x10 */
1508 U16 Reserved3; /*0x12 */
1509 U32 Reserved4; /*0x14 */
1510 } MPI2_BOOT_DEVICE_ENCLOSURE_SLOT,
1511 *PTR_MPI2_BOOT_DEVICE_ENCLOSURE_SLOT,
1512 Mpi2BootDeviceEnclosureSlot_t,
1513 *pMpi2BootDeviceEnclosureSlot_t;
1515 typedef struct _MPI2_BOOT_DEVICE_DEVICE_NAME {
1516 U64 DeviceName; /*0x00 */
1517 U8 LUN[8]; /*0x08 */
1518 U32 Reserved1; /*0x10 */
1519 U32 Reserved2; /*0x14 */
1520 } MPI2_BOOT_DEVICE_DEVICE_NAME,
1521 *PTR_MPI2_BOOT_DEVICE_DEVICE_NAME,
1522 Mpi2BootDeviceDeviceName_t,
1523 *pMpi2BootDeviceDeviceName_t;
1525 typedef union _MPI2_MPI2_BIOSPAGE2_BOOT_DEVICE {
1526 MPI2_BOOT_DEVICE_ADAPTER_ORDER AdapterOrder;
1527 MPI2_BOOT_DEVICE_SAS_WWID SasWwid;
1528 MPI2_BOOT_DEVICE_ENCLOSURE_SLOT EnclosureSlot;
1529 MPI2_BOOT_DEVICE_DEVICE_NAME DeviceName;
1530 } MPI2_BIOSPAGE2_BOOT_DEVICE,
1531 *PTR_MPI2_BIOSPAGE2_BOOT_DEVICE,
1532 Mpi2BiosPage2BootDevice_t,
1533 *pMpi2BiosPage2BootDevice_t;
1535 typedef struct _MPI2_CONFIG_PAGE_BIOS_2 {
1536 MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */
1537 U32 Reserved1; /*0x04 */
1538 U32 Reserved2; /*0x08 */
1539 U32 Reserved3; /*0x0C */
1540 U32 Reserved4; /*0x10 */
1541 U32 Reserved5; /*0x14 */
1542 U32 Reserved6; /*0x18 */
1543 U8 ReqBootDeviceForm; /*0x1C */
1544 U8 Reserved7; /*0x1D */
1545 U16 Reserved8; /*0x1E */
1546 MPI2_BIOSPAGE2_BOOT_DEVICE RequestedBootDevice; /*0x20 */
1547 U8 ReqAltBootDeviceForm; /*0x38 */
1548 U8 Reserved9; /*0x39 */
1549 U16 Reserved10; /*0x3A */
1550 MPI2_BIOSPAGE2_BOOT_DEVICE RequestedAltBootDevice; /*0x3C */
1551 U8 CurrentBootDeviceForm; /*0x58 */
1552 U8 Reserved11; /*0x59 */
1553 U16 Reserved12; /*0x5A */
1554 MPI2_BIOSPAGE2_BOOT_DEVICE CurrentBootDevice; /*0x58 */
1555 } MPI2_CONFIG_PAGE_BIOS_2, *PTR_MPI2_CONFIG_PAGE_BIOS_2,
1556 Mpi2BiosPage2_t, *pMpi2BiosPage2_t;
1558 #define MPI2_BIOSPAGE2_PAGEVERSION (0x04)
1560 /*values for BIOS Page 2 BootDeviceForm fields */
1561 #define MPI2_BIOSPAGE2_FORM_MASK (0x0F)
1562 #define MPI2_BIOSPAGE2_FORM_NO_DEVICE_SPECIFIED (0x00)
1563 #define MPI2_BIOSPAGE2_FORM_SAS_WWID (0x05)
1564 #define MPI2_BIOSPAGE2_FORM_ENCLOSURE_SLOT (0x06)
1565 #define MPI2_BIOSPAGE2_FORM_DEVICE_NAME (0x07)
1570 #define MPI2_BIOSPAGE3_NUM_ADAPTER (4)
1572 typedef struct _MPI2_ADAPTER_INFO {
1573 U8 PciBusNumber; /*0x00 */
1574 U8 PciDeviceAndFunctionNumber; /*0x01 */
1575 U16 AdapterFlags; /*0x02 */
1576 } MPI2_ADAPTER_INFO, *PTR_MPI2_ADAPTER_INFO,
1577 Mpi2AdapterInfo_t, *pMpi2AdapterInfo_t;
1579 #define MPI2_ADAPTER_INFO_FLAGS_EMBEDDED (0x0001)
1580 #define MPI2_ADAPTER_INFO_FLAGS_INIT_STATUS (0x0002)
1582 typedef struct _MPI2_ADAPTER_ORDER_AUX {
1583 U64 WWID; /* 0x00 */
1584 U32 Reserved1; /* 0x08 */
1585 U32 Reserved2; /* 0x0C */
1586 } MPI2_ADAPTER_ORDER_AUX, *PTR_MPI2_ADAPTER_ORDER_AUX,
1587 Mpi2AdapterOrderAux_t, *pMpi2AdapterOrderAux_t;
1590 typedef struct _MPI2_CONFIG_PAGE_BIOS_3 {
1591 MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */
1592 U32 GlobalFlags; /*0x04 */
1593 U32 BiosVersion; /*0x08 */
1594 MPI2_ADAPTER_INFO AdapterOrder[MPI2_BIOSPAGE3_NUM_ADAPTER];
1595 U32 Reserved1; /*0x1C */
1596 MPI2_ADAPTER_ORDER_AUX AdapterOrderAux[MPI2_BIOSPAGE3_NUM_ADAPTER];
1597 } MPI2_CONFIG_PAGE_BIOS_3,
1598 *PTR_MPI2_CONFIG_PAGE_BIOS_3,
1599 Mpi2BiosPage3_t, *pMpi2BiosPage3_t;
1601 #define MPI2_BIOSPAGE3_PAGEVERSION (0x01)
1603 /*values for BIOS Page 3 GlobalFlags */
1604 #define MPI2_BIOSPAGE3_FLAGS_PAUSE_ON_ERROR (0x00000002)
1605 #define MPI2_BIOSPAGE3_FLAGS_VERBOSE_ENABLE (0x00000004)
1606 #define MPI2_BIOSPAGE3_FLAGS_HOOK_INT_40_DISABLE (0x00000010)
1608 #define MPI2_BIOSPAGE3_FLAGS_DEV_LIST_DISPLAY_MASK (0x000000E0)
1609 #define MPI2_BIOSPAGE3_FLAGS_INSTALLED_DEV_DISPLAY (0x00000000)
1610 #define MPI2_BIOSPAGE3_FLAGS_ADAPTER_DISPLAY (0x00000020)
1611 #define MPI2_BIOSPAGE3_FLAGS_ADAPTER_DEV_DISPLAY (0x00000040)
1617 *Host code (drivers, BIOS, utilities, etc.) should leave this define set to
1618 *one and check the value returned for NumPhys at runtime.
1620 #ifndef MPI2_BIOS_PAGE_4_PHY_ENTRIES
1621 #define MPI2_BIOS_PAGE_4_PHY_ENTRIES (1)
1624 typedef struct _MPI2_BIOS4_ENTRY {
1625 U64 ReassignmentWWID; /*0x00 */
1626 U64 ReassignmentDeviceName; /*0x08 */
1627 } MPI2_BIOS4_ENTRY, *PTR_MPI2_BIOS4_ENTRY,
1628 Mpi2MBios4Entry_t, *pMpi2Bios4Entry_t;
1630 typedef struct _MPI2_CONFIG_PAGE_BIOS_4 {
1631 MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */
1632 U8 NumPhys; /*0x04 */
1633 U8 Reserved1; /*0x05 */
1634 U16 Reserved2; /*0x06 */
1636 Phy[MPI2_BIOS_PAGE_4_PHY_ENTRIES]; /*0x08 */
1637 } MPI2_CONFIG_PAGE_BIOS_4, *PTR_MPI2_CONFIG_PAGE_BIOS_4,
1638 Mpi2BiosPage4_t, *pMpi2BiosPage4_t;
1640 #define MPI2_BIOSPAGE4_PAGEVERSION (0x01)
1643 /****************************************************************************
1644 * RAID Volume Config Pages
1645 ****************************************************************************/
1647 /*RAID Volume Page 0 */
1649 typedef struct _MPI2_RAIDVOL0_PHYS_DISK {
1650 U8 RAIDSetNum; /*0x00 */
1651 U8 PhysDiskMap; /*0x01 */
1652 U8 PhysDiskNum; /*0x02 */
1653 U8 Reserved; /*0x03 */
1654 } MPI2_RAIDVOL0_PHYS_DISK, *PTR_MPI2_RAIDVOL0_PHYS_DISK,
1655 Mpi2RaidVol0PhysDisk_t, *pMpi2RaidVol0PhysDisk_t;
1657 /*defines for the PhysDiskMap field */
1658 #define MPI2_RAIDVOL0_PHYSDISK_PRIMARY (0x01)
1659 #define MPI2_RAIDVOL0_PHYSDISK_SECONDARY (0x02)
1661 typedef struct _MPI2_RAIDVOL0_SETTINGS {
1662 U16 Settings; /*0x00 */
1663 U8 HotSparePool; /*0x01 */
1664 U8 Reserved; /*0x02 */
1665 } MPI2_RAIDVOL0_SETTINGS, *PTR_MPI2_RAIDVOL0_SETTINGS,
1666 Mpi2RaidVol0Settings_t,
1667 *pMpi2RaidVol0Settings_t;
1669 /*RAID Volume Page 0 HotSparePool defines, also used in RAID Physical Disk */
1670 #define MPI2_RAID_HOT_SPARE_POOL_0 (0x01)
1671 #define MPI2_RAID_HOT_SPARE_POOL_1 (0x02)
1672 #define MPI2_RAID_HOT_SPARE_POOL_2 (0x04)
1673 #define MPI2_RAID_HOT_SPARE_POOL_3 (0x08)
1674 #define MPI2_RAID_HOT_SPARE_POOL_4 (0x10)
1675 #define MPI2_RAID_HOT_SPARE_POOL_5 (0x20)
1676 #define MPI2_RAID_HOT_SPARE_POOL_6 (0x40)
1677 #define MPI2_RAID_HOT_SPARE_POOL_7 (0x80)
1679 /*RAID Volume Page 0 VolumeSettings defines */
1680 #define MPI2_RAIDVOL0_SETTING_USE_PRODUCT_ID_SUFFIX (0x0008)
1681 #define MPI2_RAIDVOL0_SETTING_AUTO_CONFIG_HSWAP_DISABLE (0x0004)
1683 #define MPI2_RAIDVOL0_SETTING_MASK_WRITE_CACHING (0x0003)
1684 #define MPI2_RAIDVOL0_SETTING_UNCHANGED (0x0000)
1685 #define MPI2_RAIDVOL0_SETTING_DISABLE_WRITE_CACHING (0x0001)
1686 #define MPI2_RAIDVOL0_SETTING_ENABLE_WRITE_CACHING (0x0002)
1689 *Host code (drivers, BIOS, utilities, etc.) should leave this define set to
1690 *one and check the value returned for NumPhysDisks at runtime.
1692 #ifndef MPI2_RAID_VOL_PAGE_0_PHYSDISK_MAX
1693 #define MPI2_RAID_VOL_PAGE_0_PHYSDISK_MAX (1)
1696 typedef struct _MPI2_CONFIG_PAGE_RAID_VOL_0 {
1697 MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */
1698 U16 DevHandle; /*0x04 */
1699 U8 VolumeState; /*0x06 */
1700 U8 VolumeType; /*0x07 */
1701 U32 VolumeStatusFlags; /*0x08 */
1702 MPI2_RAIDVOL0_SETTINGS VolumeSettings; /*0x0C */
1703 U64 MaxLBA; /*0x10 */
1704 U32 StripeSize; /*0x18 */
1705 U16 BlockSize; /*0x1C */
1706 U16 Reserved1; /*0x1E */
1707 U8 SupportedPhysDisks;/*0x20 */
1708 U8 ResyncRate; /*0x21 */
1709 U16 DataScrubDuration; /*0x22 */
1710 U8 NumPhysDisks; /*0x24 */
1711 U8 Reserved2; /*0x25 */
1712 U8 Reserved3; /*0x26 */
1713 U8 InactiveStatus; /*0x27 */
1714 MPI2_RAIDVOL0_PHYS_DISK
1715 PhysDisk[MPI2_RAID_VOL_PAGE_0_PHYSDISK_MAX]; /*0x28 */
1716 } MPI2_CONFIG_PAGE_RAID_VOL_0,
1717 *PTR_MPI2_CONFIG_PAGE_RAID_VOL_0,
1718 Mpi2RaidVolPage0_t, *pMpi2RaidVolPage0_t;
1720 #define MPI2_RAIDVOLPAGE0_PAGEVERSION (0x0A)
1722 /*values for RAID VolumeState */
1723 #define MPI2_RAID_VOL_STATE_MISSING (0x00)
1724 #define MPI2_RAID_VOL_STATE_FAILED (0x01)
1725 #define MPI2_RAID_VOL_STATE_INITIALIZING (0x02)
1726 #define MPI2_RAID_VOL_STATE_ONLINE (0x03)
1727 #define MPI2_RAID_VOL_STATE_DEGRADED (0x04)
1728 #define MPI2_RAID_VOL_STATE_OPTIMAL (0x05)
1730 /*values for RAID VolumeType */
1731 #define MPI2_RAID_VOL_TYPE_RAID0 (0x00)
1732 #define MPI2_RAID_VOL_TYPE_RAID1E (0x01)
1733 #define MPI2_RAID_VOL_TYPE_RAID1 (0x02)
1734 #define MPI2_RAID_VOL_TYPE_RAID10 (0x05)
1735 #define MPI2_RAID_VOL_TYPE_UNKNOWN (0xFF)
1737 /*values for RAID Volume Page 0 VolumeStatusFlags field */
1738 #define MPI2_RAIDVOL0_STATUS_FLAG_PENDING_RESYNC (0x02000000)
1739 #define MPI2_RAIDVOL0_STATUS_FLAG_BACKG_INIT_PENDING (0x01000000)
1740 #define MPI2_RAIDVOL0_STATUS_FLAG_MDC_PENDING (0x00800000)
1741 #define MPI2_RAIDVOL0_STATUS_FLAG_USER_CONSIST_PENDING (0x00400000)
1742 #define MPI2_RAIDVOL0_STATUS_FLAG_MAKE_DATA_CONSISTENT (0x00200000)
1743 #define MPI2_RAIDVOL0_STATUS_FLAG_DATA_SCRUB (0x00100000)
1744 #define MPI2_RAIDVOL0_STATUS_FLAG_CONSISTENCY_CHECK (0x00080000)
1745 #define MPI2_RAIDVOL0_STATUS_FLAG_CAPACITY_EXPANSION (0x00040000)
1746 #define MPI2_RAIDVOL0_STATUS_FLAG_BACKGROUND_INIT (0x00020000)
1747 #define MPI2_RAIDVOL0_STATUS_FLAG_RESYNC_IN_PROGRESS (0x00010000)
1748 #define MPI2_RAIDVOL0_STATUS_FLAG_VOL_NOT_CONSISTENT (0x00000080)
1749 #define MPI2_RAIDVOL0_STATUS_FLAG_OCE_ALLOWED (0x00000040)
1750 #define MPI2_RAIDVOL0_STATUS_FLAG_BGI_COMPLETE (0x00000020)
1751 #define MPI2_RAIDVOL0_STATUS_FLAG_1E_OFFSET_MIRROR (0x00000000)
1752 #define MPI2_RAIDVOL0_STATUS_FLAG_1E_ADJACENT_MIRROR (0x00000010)
1753 #define MPI2_RAIDVOL0_STATUS_FLAG_BAD_BLOCK_TABLE_FULL (0x00000008)
1754 #define MPI2_RAIDVOL0_STATUS_FLAG_VOLUME_INACTIVE (0x00000004)
1755 #define MPI2_RAIDVOL0_STATUS_FLAG_QUIESCED (0x00000002)
1756 #define MPI2_RAIDVOL0_STATUS_FLAG_ENABLED (0x00000001)
1758 /*values for RAID Volume Page 0 SupportedPhysDisks field */
1759 #define MPI2_RAIDVOL0_SUPPORT_SOLID_STATE_DISKS (0x08)
1760 #define MPI2_RAIDVOL0_SUPPORT_HARD_DISKS (0x04)
1761 #define MPI2_RAIDVOL0_SUPPORT_SAS_PROTOCOL (0x02)
1762 #define MPI2_RAIDVOL0_SUPPORT_SATA_PROTOCOL (0x01)
1764 /*values for RAID Volume Page 0 InactiveStatus field */
1765 #define MPI2_RAIDVOLPAGE0_UNKNOWN_INACTIVE (0x00)
1766 #define MPI2_RAIDVOLPAGE0_STALE_METADATA_INACTIVE (0x01)
1767 #define MPI2_RAIDVOLPAGE0_FOREIGN_VOLUME_INACTIVE (0x02)
1768 #define MPI2_RAIDVOLPAGE0_INSUFFICIENT_RESOURCE_INACTIVE (0x03)
1769 #define MPI2_RAIDVOLPAGE0_CLONE_VOLUME_INACTIVE (0x04)
1770 #define MPI2_RAIDVOLPAGE0_INSUFFICIENT_METADATA_INACTIVE (0x05)
1771 #define MPI2_RAIDVOLPAGE0_PREVIOUSLY_DELETED (0x06)
1774 /*RAID Volume Page 1 */
1776 typedef struct _MPI2_CONFIG_PAGE_RAID_VOL_1 {
1777 MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */
1778 U16 DevHandle; /*0x04 */
1779 U16 Reserved0; /*0x06 */
1780 U8 GUID[24]; /*0x08 */
1781 U8 Name[16]; /*0x20 */
1783 U32 Reserved1; /*0x38 */
1784 U32 Reserved2; /*0x3C */
1785 } MPI2_CONFIG_PAGE_RAID_VOL_1,
1786 *PTR_MPI2_CONFIG_PAGE_RAID_VOL_1,
1787 Mpi2RaidVolPage1_t, *pMpi2RaidVolPage1_t;
1789 #define MPI2_RAIDVOLPAGE1_PAGEVERSION (0x03)
1792 /****************************************************************************
1793 * RAID Physical Disk Config Pages
1794 ****************************************************************************/
1796 /*RAID Physical Disk Page 0 */
1798 typedef struct _MPI2_RAIDPHYSDISK0_SETTINGS {
1799 U16 Reserved1; /*0x00 */
1800 U8 HotSparePool; /*0x02 */
1801 U8 Reserved2; /*0x03 */
1802 } MPI2_RAIDPHYSDISK0_SETTINGS,
1803 *PTR_MPI2_RAIDPHYSDISK0_SETTINGS,
1804 Mpi2RaidPhysDisk0Settings_t,
1805 *pMpi2RaidPhysDisk0Settings_t;
1807 /*use MPI2_RAID_HOT_SPARE_POOL_ defines for the HotSparePool field */
1809 typedef struct _MPI2_RAIDPHYSDISK0_INQUIRY_DATA {
1810 U8 VendorID[8]; /*0x00 */
1811 U8 ProductID[16]; /*0x08 */
1812 U8 ProductRevLevel[4]; /*0x18 */
1813 U8 SerialNum[32]; /*0x1C */
1814 } MPI2_RAIDPHYSDISK0_INQUIRY_DATA,
1815 *PTR_MPI2_RAIDPHYSDISK0_INQUIRY_DATA,
1816 Mpi2RaidPhysDisk0InquiryData_t,
1817 *pMpi2RaidPhysDisk0InquiryData_t;
1819 typedef struct _MPI2_CONFIG_PAGE_RD_PDISK_0 {
1820 MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */
1821 U16 DevHandle; /*0x04 */
1822 U8 Reserved1; /*0x06 */
1823 U8 PhysDiskNum; /*0x07 */
1824 MPI2_RAIDPHYSDISK0_SETTINGS PhysDiskSettings; /*0x08 */
1825 U32 Reserved2; /*0x0C */
1826 MPI2_RAIDPHYSDISK0_INQUIRY_DATA InquiryData; /*0x10 */
1827 U32 Reserved3; /*0x4C */
1828 U8 PhysDiskState; /*0x50 */
1829 U8 OfflineReason; /*0x51 */
1830 U8 IncompatibleReason; /*0x52 */
1831 U8 PhysDiskAttributes; /*0x53 */
1832 U32 PhysDiskStatusFlags;/*0x54 */
1833 U64 DeviceMaxLBA; /*0x58 */
1834 U64 HostMaxLBA; /*0x60 */
1835 U64 CoercedMaxLBA; /*0x68 */
1836 U16 BlockSize; /*0x70 */
1837 U16 Reserved5; /*0x72 */
1838 U32 Reserved6; /*0x74 */
1839 } MPI2_CONFIG_PAGE_RD_PDISK_0,
1840 *PTR_MPI2_CONFIG_PAGE_RD_PDISK_0,
1841 Mpi2RaidPhysDiskPage0_t,
1842 *pMpi2RaidPhysDiskPage0_t;
1844 #define MPI2_RAIDPHYSDISKPAGE0_PAGEVERSION (0x05)
1846 /*PhysDiskState defines */
1847 #define MPI2_RAID_PD_STATE_NOT_CONFIGURED (0x00)
1848 #define MPI2_RAID_PD_STATE_NOT_COMPATIBLE (0x01)
1849 #define MPI2_RAID_PD_STATE_OFFLINE (0x02)
1850 #define MPI2_RAID_PD_STATE_ONLINE (0x03)
1851 #define MPI2_RAID_PD_STATE_HOT_SPARE (0x04)
1852 #define MPI2_RAID_PD_STATE_DEGRADED (0x05)
1853 #define MPI2_RAID_PD_STATE_REBUILDING (0x06)
1854 #define MPI2_RAID_PD_STATE_OPTIMAL (0x07)
1856 /*OfflineReason defines */
1857 #define MPI2_PHYSDISK0_ONLINE (0x00)
1858 #define MPI2_PHYSDISK0_OFFLINE_MISSING (0x01)
1859 #define MPI2_PHYSDISK0_OFFLINE_FAILED (0x03)
1860 #define MPI2_PHYSDISK0_OFFLINE_INITIALIZING (0x04)
1861 #define MPI2_PHYSDISK0_OFFLINE_REQUESTED (0x05)
1862 #define MPI2_PHYSDISK0_OFFLINE_FAILED_REQUESTED (0x06)
1863 #define MPI2_PHYSDISK0_OFFLINE_OTHER (0xFF)
1865 /*IncompatibleReason defines */
1866 #define MPI2_PHYSDISK0_COMPATIBLE (0x00)
1867 #define MPI2_PHYSDISK0_INCOMPATIBLE_PROTOCOL (0x01)
1868 #define MPI2_PHYSDISK0_INCOMPATIBLE_BLOCKSIZE (0x02)
1869 #define MPI2_PHYSDISK0_INCOMPATIBLE_MAX_LBA (0x03)
1870 #define MPI2_PHYSDISK0_INCOMPATIBLE_SATA_EXTENDED_CMD (0x04)
1871 #define MPI2_PHYSDISK0_INCOMPATIBLE_REMOVEABLE_MEDIA (0x05)
1872 #define MPI2_PHYSDISK0_INCOMPATIBLE_MEDIA_TYPE (0x06)
1873 #define MPI2_PHYSDISK0_INCOMPATIBLE_UNKNOWN (0xFF)
1875 /*PhysDiskAttributes defines */
1876 #define MPI2_PHYSDISK0_ATTRIB_MEDIA_MASK (0x0C)
1877 #define MPI2_PHYSDISK0_ATTRIB_SOLID_STATE_DRIVE (0x08)
1878 #define MPI2_PHYSDISK0_ATTRIB_HARD_DISK_DRIVE (0x04)
1880 #define MPI2_PHYSDISK0_ATTRIB_PROTOCOL_MASK (0x03)
1881 #define MPI2_PHYSDISK0_ATTRIB_SAS_PROTOCOL (0x02)
1882 #define MPI2_PHYSDISK0_ATTRIB_SATA_PROTOCOL (0x01)
1884 /*PhysDiskStatusFlags defines */
1885 #define MPI2_PHYSDISK0_STATUS_FLAG_NOT_CERTIFIED (0x00000040)
1886 #define MPI2_PHYSDISK0_STATUS_FLAG_OCE_TARGET (0x00000020)
1887 #define MPI2_PHYSDISK0_STATUS_FLAG_WRITE_CACHE_ENABLED (0x00000010)
1888 #define MPI2_PHYSDISK0_STATUS_FLAG_OPTIMAL_PREVIOUS (0x00000000)
1889 #define MPI2_PHYSDISK0_STATUS_FLAG_NOT_OPTIMAL_PREVIOUS (0x00000008)
1890 #define MPI2_PHYSDISK0_STATUS_FLAG_INACTIVE_VOLUME (0x00000004)
1891 #define MPI2_PHYSDISK0_STATUS_FLAG_QUIESCED (0x00000002)
1892 #define MPI2_PHYSDISK0_STATUS_FLAG_OUT_OF_SYNC (0x00000001)
1895 /*RAID Physical Disk Page 1 */
1898 *Host code (drivers, BIOS, utilities, etc.) should leave this define set to
1899 *one and check the value returned for NumPhysDiskPaths at runtime.
1901 #ifndef MPI2_RAID_PHYS_DISK1_PATH_MAX
1902 #define MPI2_RAID_PHYS_DISK1_PATH_MAX (1)
1905 typedef struct _MPI2_RAIDPHYSDISK1_PATH {
1906 U16 DevHandle; /*0x00 */
1907 U16 Reserved1; /*0x02 */
1909 U64 OwnerWWID; /*0x0C */
1910 U8 OwnerIdentifier; /*0x14 */
1911 U8 Reserved2; /*0x15 */
1912 U16 Flags; /*0x16 */
1913 } MPI2_RAIDPHYSDISK1_PATH, *PTR_MPI2_RAIDPHYSDISK1_PATH,
1914 Mpi2RaidPhysDisk1Path_t,
1915 *pMpi2RaidPhysDisk1Path_t;
1917 /*RAID Physical Disk Page 1 Physical Disk Path Flags field defines */
1918 #define MPI2_RAID_PHYSDISK1_FLAG_PRIMARY (0x0004)
1919 #define MPI2_RAID_PHYSDISK1_FLAG_BROKEN (0x0002)
1920 #define MPI2_RAID_PHYSDISK1_FLAG_INVALID (0x0001)
1922 typedef struct _MPI2_CONFIG_PAGE_RD_PDISK_1 {
1923 MPI2_CONFIG_PAGE_HEADER Header; /*0x00 */
1924 U8 NumPhysDiskPaths; /*0x04 */
1925 U8 PhysDiskNum; /*0x05 */
1926 U16 Reserved1; /*0x06 */
1927 U32 Reserved2; /*0x08 */
1928 MPI2_RAIDPHYSDISK1_PATH
1929 PhysicalDiskPath[MPI2_RAID_PHYS_DISK1_PATH_MAX];/*0x0C */
1930 } MPI2_CONFIG_PAGE_RD_PDISK_1,
1931 *PTR_MPI2_CONFIG_PAGE_RD_PDISK_1,
1932 Mpi2RaidPhysDiskPage1_t,
1933 *pMpi2RaidPhysDiskPage1_t;
1935 #define MPI2_RAIDPHYSDISKPAGE1_PAGEVERSION (0x02)
1938 /****************************************************************************
1939 * values for fields used by several types of SAS Config Pages
1940 ****************************************************************************/
1942 /*values for NegotiatedLinkRates fields */
1943 #define MPI2_SAS_NEG_LINK_RATE_MASK_LOGICAL (0xF0)
1944 #define MPI2_SAS_NEG_LINK_RATE_SHIFT_LOGICAL (4)
1945 #define MPI2_SAS_NEG_LINK_RATE_MASK_PHYSICAL (0x0F)
1946 /*link rates used for Negotiated Physical and Logical Link Rate */
1947 #define MPI2_SAS_NEG_LINK_RATE_UNKNOWN_LINK_RATE (0x00)
1948 #define MPI2_SAS_NEG_LINK_RATE_PHY_DISABLED (0x01)
1949 #define MPI2_SAS_NEG_LINK_RATE_NEGOTIATION_FAILED (0x02)
1950 #define MPI2_SAS_NEG_LINK_RATE_SATA_OOB_COMPLETE (0x03)
1951 #define MPI2_SAS_NEG_LINK_RATE_PORT_SELECTOR (0x04)
1952 #define MPI2_SAS_NEG_LINK_RATE_SMP_RESET_IN_PROGRESS (0x05)
1953 #define MPI2_SAS_NEG_LINK_RATE_UNSUPPORTED_PHY (0x06)
1954 #define MPI2_SAS_NEG_LINK_RATE_1_5 (0x08)
1955 #define MPI2_SAS_NEG_LINK_RATE_3_0 (0x09)
1956 #define MPI2_SAS_NEG_LINK_RATE_6_0 (0x0A)
1957 #define MPI25_SAS_NEG_LINK_RATE_12_0 (0x0B)
1960 /*values for AttachedPhyInfo fields */
1961 #define MPI2_SAS_APHYINFO_INSIDE_ZPSDS_PERSISTENT (0x00000040)
1962 #define MPI2_SAS_APHYINFO_REQUESTED_INSIDE_ZPSDS (0x00000020)
1963 #define MPI2_SAS_APHYINFO_BREAK_REPLY_CAPABLE (0x00000010)
1965 #define MPI2_SAS_APHYINFO_REASON_MASK (0x0000000F)
1966 #define MPI2_SAS_APHYINFO_REASON_UNKNOWN (0x00000000)
1967 #define MPI2_SAS_APHYINFO_REASON_POWER_ON (0x00000001)
1968 #define MPI2_SAS_APHYINFO_REASON_HARD_RESET (0x00000002)
1969 #define MPI2_SAS_APHYINFO_REASON_SMP_PHY_CONTROL (0x00000003)
1970 #define MPI2_SAS_APHYINFO_REASON_LOSS_OF_SYNC (0x00000004)
1971 #define MPI2_SAS_APHYINFO_REASON_MULTIPLEXING_SEQ (0x00000005)
1972 #define MPI2_SAS_APHYINFO_REASON_IT_NEXUS_LOSS_TIMER (0x00000006)
1973 #define MPI2_SAS_APHYINFO_REASON_BREAK_TIMEOUT (0x00000007)
1974 #define MPI2_SAS_APHYINFO_REASON_PHY_TEST_STOPPED (0x00000008)
1977 /*values for PhyInfo fields */
1978 #define MPI2_SAS_PHYINFO_PHY_VACANT (0x80000000)
1980 #define MPI2_SAS_PHYINFO_PHY_POWER_CONDITION_MASK (0x18000000)
1981 #define MPI2_SAS_PHYINFO_SHIFT_PHY_POWER_CONDITION (27)
1982 #define MPI2_SAS_PHYINFO_PHY_POWER_ACTIVE (0x00000000)
1983 #define MPI2_SAS_PHYINFO_PHY_POWER_PARTIAL (0x08000000)
1984 #define MPI2_SAS_PHYINFO_PHY_POWER_SLUMBER (0x10000000)
1986 #define MPI2_SAS_PHYINFO_CHANGED_REQ_INSIDE_ZPSDS (0x04000000)
1987 #define MPI2_SAS_PHYINFO_INSIDE_ZPSDS_PERSISTENT (0x02000000)
1988 #define MPI2_SAS_PHYINFO_REQ_INSIDE_ZPSDS (0x01000000)
1989 #define MPI2_SAS_PHYINFO_ZONE_GROUP_PERSISTENT (0x00400000)
1990 #define MPI2_SAS_PHYINFO_INSIDE_ZPSDS (0x00200000)
1991 #define MPI2_SAS_PHYINFO_ZONING_ENABLED (0x00100000)
1993 #define MPI2_SAS_PHYINFO_REASON_MASK (0x000F0000)
1994 #define MPI2_SAS_PHYINFO_REASON_UNKNOWN (0x00000000)
1995 #define MPI2_SAS_PHYINFO_REASON_POWER_ON (0x00010000)
1996 #define MPI2_SAS_PHYINFO_REASON_HARD_RESET (0x00020000)
1997 #define MPI2_SAS_PHYINFO_REASON_SMP_PHY_CONTROL (0x00030000)
1998 #define MPI2_SAS_PHYINFO_REASON_LOSS_OF_SYNC (0x00040000)
1999 #define MPI2_SAS_PHYINFO_REASON_MULTIPLEXING_SEQ (0x00050000)
2000 #define MPI2_SAS_PHYINFO_REASON_IT_NEXUS_LOSS_TIMER (0x00060000)
2001 #define MPI2_SAS_PHYINFO_REASON_BREAK_TIMEOUT (0x00070000)
2002 #define MPI2_SAS_PHYINFO_REASON_PHY_TEST_STOPPED (0x00080000)
2004 #define MPI2_SAS_PHYINFO_MULTIPLEXING_SUPPORTED (0x00008000)
2005 #define MPI2_SAS_PHYINFO_SATA_PORT_ACTIVE (0x00004000)
2006 #define MPI2_SAS_PHYINFO_SATA_PORT_SELECTOR_PRESENT (0x00002000)
2007 #define MPI2_SAS_PHYINFO_VIRTUAL_PHY (0x00001000)
2009 #define MPI2_SAS_PHYINFO_MASK_PARTIAL_PATHWAY_TIME (0x00000F00)
2010 #define MPI2_SAS_PHYINFO_SHIFT_PARTIAL_PATHWAY_TIME (8)
2012 #define MPI2_SAS_PHYINFO_MASK_ROUTING_ATTRIBUTE (0x000000F0)
2013 #define MPI2_SAS_PHYINFO_DIRECT_ROUTING (0x00000000)
2014 #define MPI2_SAS_PHYINFO_SUBTRACTIVE_ROUTING (0x00000010)
2015 #define MPI2_SAS_PHYINFO_TABLE_ROUTING (0x00000020)
2018 /*values for SAS ProgrammedLinkRate fields */
2019 #define MPI2_SAS_PRATE_MAX_RATE_MASK (0xF0)
2020 #define MPI2_SAS_PRATE_MAX_RATE_NOT_PROGRAMMABLE (0x00)
2021 #define MPI2_SAS_PRATE_MAX_RATE_1_5 (0x80)
2022 #define MPI2_SAS_PRATE_MAX_RATE_3_0 (0x90)
2023 #define MPI2_SAS_PRATE_MAX_RATE_6_0 (0xA0)
2024 #define MPI25_SAS_PRATE_MAX_RATE_12_0 (0xB0)
2025 #define MPI2_SAS_PRATE_MIN_RATE_MASK (0x0F)
2026 #define MPI2_SAS_PRATE_MIN_RATE_NOT_PROGRAMMABLE (0x00)
2027 #define MPI2_SAS_PRATE_MIN_RATE_1_5 (0x08)
2028 #define MPI2_SAS_PRATE_MIN_RATE_3_0 (0x09)
2029 #define MPI2_SAS_PRATE_MIN_RATE_6_0 (0x0A)
2030 #define MPI25_SAS_PRATE_MIN_RATE_12_0 (0x0B)
2033 /*values for SAS HwLinkRate fields */
2034 #define MPI2_SAS_HWRATE_MAX_RATE_MASK (0xF0)
2035 #define MPI2_SAS_HWRATE_MAX_RATE_1_5 (0x80)
2036 #define MPI2_SAS_HWRATE_MAX_RATE_3_0 (0x90)
2037 #define MPI2_SAS_HWRATE_MAX_RATE_6_0 (0xA0)
2038 #define MPI25_SAS_HWRATE_MAX_RATE_12_0 (0xB0)
2039 #define MPI2_SAS_HWRATE_MIN_RATE_MASK (0x0F)
2040 #define MPI2_SAS_HWRATE_MIN_RATE_1_5 (0x08)
2041 #define MPI2_SAS_HWRATE_MIN_RATE_3_0 (0x09)
2042 #define MPI2_SAS_HWRATE_MIN_RATE_6_0 (0x0A)
2043 #define MPI25_SAS_HWRATE_MIN_RATE_12_0 (0x0B)
2047 /****************************************************************************
2048 * SAS IO Unit Config Pages
2049 ****************************************************************************/
2051 /*SAS IO Unit Page 0 */
2053 typedef struct _MPI2_SAS_IO_UNIT0_PHY_DATA {
2055 U8 PortFlags; /*0x01 */
2056 U8 PhyFlags; /*0x02 */
2057 U8 NegotiatedLinkRate; /*0x03 */
2058 U32 ControllerPhyDeviceInfo;/*0x04 */
2059 U16 AttachedDevHandle; /*0x08 */
2060 U16 ControllerDevHandle; /*0x0A */
2061 U32 DiscoveryStatus; /*0x0C */
2062 U32 Reserved; /*0x10 */
2063 } MPI2_SAS_IO_UNIT0_PHY_DATA,
2064 *PTR_MPI2_SAS_IO_UNIT0_PHY_DATA,
2065 Mpi2SasIOUnit0PhyData_t,
2066 *pMpi2SasIOUnit0PhyData_t;
2069 *Host code (drivers, BIOS, utilities, etc.) should leave this define set to
2070 *one and check the value returned for NumPhys at runtime.
2072 #ifndef MPI2_SAS_IOUNIT0_PHY_MAX
2073 #define MPI2_SAS_IOUNIT0_PHY_MAX (1)
2076 typedef struct _MPI2_CONFIG_PAGE_SASIOUNIT_0 {
2077 MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /*0x00 */
2078 U32 Reserved1;/*0x08 */
2079 U8 NumPhys; /*0x0C */
2080 U8 Reserved2;/*0x0D */
2081 U16 Reserved3;/*0x0E */
2082 MPI2_SAS_IO_UNIT0_PHY_DATA
2083 PhyData[MPI2_SAS_IOUNIT0_PHY_MAX]; /*0x10 */
2084 } MPI2_CONFIG_PAGE_SASIOUNIT_0,
2085 *PTR_MPI2_CONFIG_PAGE_SASIOUNIT_0,
2086 Mpi2SasIOUnitPage0_t, *pMpi2SasIOUnitPage0_t;
2088 #define MPI2_SASIOUNITPAGE0_PAGEVERSION (0x05)
2090 /*values for SAS IO Unit Page 0 PortFlags */
2091 #define MPI2_SASIOUNIT0_PORTFLAGS_DISCOVERY_IN_PROGRESS (0x08)
2092 #define MPI2_SASIOUNIT0_PORTFLAGS_AUTO_PORT_CONFIG (0x01)
2094 /*values for SAS IO Unit Page 0 PhyFlags */
2095 #define MPI2_SASIOUNIT0_PHYFLAGS_INIT_PERSIST_CONNECT (0x40)
2096 #define MPI2_SASIOUNIT0_PHYFLAGS_TARG_PERSIST_CONNECT (0x20)
2097 #define MPI2_SASIOUNIT0_PHYFLAGS_ZONING_ENABLED (0x10)
2098 #define MPI2_SASIOUNIT0_PHYFLAGS_PHY_DISABLED (0x08)
2100 /*use MPI2_SAS_NEG_LINK_RATE_ defines for the NegotiatedLinkRate field */
2102 /*see mpi2_sas.h for values for
2103 *SAS IO Unit Page 0 ControllerPhyDeviceInfo values */
2105 /*values for SAS IO Unit Page 0 DiscoveryStatus */
2106 #define MPI2_SASIOUNIT0_DS_MAX_ENCLOSURES_EXCEED (0x80000000)
2107 #define MPI2_SASIOUNIT0_DS_MAX_EXPANDERS_EXCEED (0x40000000)
2108 #define MPI2_SASIOUNIT0_DS_MAX_DEVICES_EXCEED (0x20000000)
2109 #define MPI2_SASIOUNIT0_DS_MAX_TOPO_PHYS_EXCEED (0x10000000)
2110 #define MPI2_SASIOUNIT0_DS_DOWNSTREAM_INITIATOR (0x08000000)
2111 #define MPI2_SASIOUNIT0_DS_MULTI_SUBTRACTIVE_SUBTRACTIVE (0x00008000)
2112 #define MPI2_SASIOUNIT0_DS_EXP_MULTI_SUBTRACTIVE (0x00004000)
2113 #define MPI2_SASIOUNIT0_DS_MULTI_PORT_DOMAIN (0x00002000)
2114 #define MPI2_SASIOUNIT0_DS_TABLE_TO_SUBTRACTIVE_LINK (0x00001000)
2115 #define MPI2_SASIOUNIT0_DS_UNSUPPORTED_DEVICE (0x00000800)
2116 #define MPI2_SASIOUNIT0_DS_TABLE_LINK (0x00000400)
2117 #define MPI2_SASIOUNIT0_DS_SUBTRACTIVE_LINK (0x00000200)
2118 #define MPI2_SASIOUNIT0_DS_SMP_CRC_ERROR (0x00000100)
2119 #define MPI2_SASIOUNIT0_DS_SMP_FUNCTION_FAILED (0x00000080)
2120 #define MPI2_SASIOUNIT0_DS_INDEX_NOT_EXIST (0x00000040)
2121 #define MPI2_SASIOUNIT0_DS_OUT_ROUTE_ENTRIES (0x00000020)
2122 #define MPI2_SASIOUNIT0_DS_SMP_TIMEOUT (0x00000010)
2123 #define MPI2_SASIOUNIT0_DS_MULTIPLE_PORTS (0x00000004)
2124 #define MPI2_SASIOUNIT0_DS_UNADDRESSABLE_DEVICE (0x00000002)
2125 #define MPI2_SASIOUNIT0_DS_LOOP_DETECTED (0x00000001)
2128 /*SAS IO Unit Page 1 */
2130 typedef struct _MPI2_SAS_IO_UNIT1_PHY_DATA {
2132 U8 PortFlags; /*0x01 */
2133 U8 PhyFlags; /*0x02 */
2134 U8 MaxMinLinkRate; /*0x03 */
2135 U32 ControllerPhyDeviceInfo; /*0x04 */
2136 U16 MaxTargetPortConnectTime; /*0x08 */
2137 U16 Reserved1; /*0x0A */
2138 } MPI2_SAS_IO_UNIT1_PHY_DATA,
2139 *PTR_MPI2_SAS_IO_UNIT1_PHY_DATA,
2140 Mpi2SasIOUnit1PhyData_t,
2141 *pMpi2SasIOUnit1PhyData_t;
2144 *Host code (drivers, BIOS, utilities, etc.) should leave this define set to
2145 *one and check the value returned for NumPhys at runtime.
2147 #ifndef MPI2_SAS_IOUNIT1_PHY_MAX
2148 #define MPI2_SAS_IOUNIT1_PHY_MAX (1)
2151 typedef struct _MPI2_CONFIG_PAGE_SASIOUNIT_1 {
2152 MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /*0x00 */
2154 ControlFlags; /*0x08 */
2156 SASNarrowMaxQueueDepth; /*0x0A */
2158 AdditionalControlFlags; /*0x0C */
2160 SASWideMaxQueueDepth; /*0x0E */
2164 SATAMaxQDepth; /*0x11 */
2166 ReportDeviceMissingDelay; /*0x12 */
2168 IODeviceMissingDelay; /*0x13 */
2169 MPI2_SAS_IO_UNIT1_PHY_DATA
2170 PhyData[MPI2_SAS_IOUNIT1_PHY_MAX]; /*0x14 */
2171 } MPI2_CONFIG_PAGE_SASIOUNIT_1,
2172 *PTR_MPI2_CONFIG_PAGE_SASIOUNIT_1,
2173 Mpi2SasIOUnitPage1_t, *pMpi2SasIOUnitPage1_t;
2175 #define MPI2_SASIOUNITPAGE1_PAGEVERSION (0x09)
2177 /*values for SAS IO Unit Page 1 ControlFlags */
2178 #define MPI2_SASIOUNIT1_CONTROL_DEVICE_SELF_TEST (0x8000)
2179 #define MPI2_SASIOUNIT1_CONTROL_SATA_3_0_MAX (0x4000)
2180 #define MPI2_SASIOUNIT1_CONTROL_SATA_1_5_MAX (0x2000)
2181 #define MPI2_SASIOUNIT1_CONTROL_SATA_SW_PRESERVE (0x1000)
2183 #define MPI2_SASIOUNIT1_CONTROL_MASK_DEV_SUPPORT (0x0600)
2184 #define MPI2_SASIOUNIT1_CONTROL_SHIFT_DEV_SUPPORT (9)
2185 #define MPI2_SASIOUNIT1_CONTROL_DEV_SUPPORT_BOTH (0x0)
2186 #define MPI2_SASIOUNIT1_CONTROL_DEV_SAS_SUPPORT (0x1)
2187 #define MPI2_SASIOUNIT1_CONTROL_DEV_SATA_SUPPORT (0x2)
2189 #define MPI2_SASIOUNIT1_CONTROL_SATA_48BIT_LBA_REQUIRED (0x0080)
2190 #define MPI2_SASIOUNIT1_CONTROL_SATA_SMART_REQUIRED (0x0040)
2191 #define MPI2_SASIOUNIT1_CONTROL_SATA_NCQ_REQUIRED (0x0020)
2192 #define MPI2_SASIOUNIT1_CONTROL_SATA_FUA_REQUIRED (0x0010)
2193 #define MPI2_SASIOUNIT1_CONTROL_TABLE_SUBTRACTIVE_ILLEGAL (0x0008)
2194 #define MPI2_SASIOUNIT1_CONTROL_SUBTRACTIVE_ILLEGAL (0x0004)
2195 #define MPI2_SASIOUNIT1_CONTROL_FIRST_LVL_DISC_ONLY (0x0002)
2196 #define MPI2_SASIOUNIT1_CONTROL_CLEAR_AFFILIATION (0x0001)
2198 /*values for SAS IO Unit Page 1 AdditionalControlFlags */
2199 #define MPI2_SASIOUNIT1_ACONTROL_DA_PERSIST_CONNECT (0x0100)
2200 #define MPI2_SASIOUNIT1_ACONTROL_MULTI_PORT_DOMAIN_ILLEGAL (0x0080)
2201 #define MPI2_SASIOUNIT1_ACONTROL_SATA_ASYNCHROUNOUS_NOTIFICATION (0x0040)
2202 #define MPI2_SASIOUNIT1_ACONTROL_INVALID_TOPOLOGY_CORRECTION (0x0020)
2203 #define MPI2_SASIOUNIT1_ACONTROL_PORT_ENABLE_ONLY_SATA_LINK_RESET (0x0010)
2204 #define MPI2_SASIOUNIT1_ACONTROL_OTHER_AFFILIATION_SATA_LINK_RESET (0x0008)
2205 #define MPI2_SASIOUNIT1_ACONTROL_SELF_AFFILIATION_SATA_LINK_RESET (0x0004)
2206 #define MPI2_SASIOUNIT1_ACONTROL_NO_AFFILIATION_SATA_LINK_RESET (0x0002)
2207 #define MPI2_SASIOUNIT1_ACONTROL_ALLOW_TABLE_TO_TABLE (0x0001)
2209 /*defines for SAS IO Unit Page 1 ReportDeviceMissingDelay */
2210 #define MPI2_SASIOUNIT1_REPORT_MISSING_TIMEOUT_MASK (0x7F)
2211 #define MPI2_SASIOUNIT1_REPORT_MISSING_UNIT_16 (0x80)
2213 /*values for SAS IO Unit Page 1 PortFlags */
2214 #define MPI2_SASIOUNIT1_PORT_FLAGS_AUTO_PORT_CONFIG (0x01)
2216 /*values for SAS IO Unit Page 1 PhyFlags */
2217 #define MPI2_SASIOUNIT1_PHYFLAGS_INIT_PERSIST_CONNECT (0x40)
2218 #define MPI2_SASIOUNIT1_PHYFLAGS_TARG_PERSIST_CONNECT (0x20)
2219 #define MPI2_SASIOUNIT1_PHYFLAGS_ZONING_ENABLE (0x10)
2220 #define MPI2_SASIOUNIT1_PHYFLAGS_PHY_DISABLE (0x08)
2222 /*values for SAS IO Unit Page 1 MaxMinLinkRate */
2223 #define MPI2_SASIOUNIT1_MAX_RATE_MASK (0xF0)
2224 #define MPI2_SASIOUNIT1_MAX_RATE_1_5 (0x80)
2225 #define MPI2_SASIOUNIT1_MAX_RATE_3_0 (0x90)
2226 #define MPI2_SASIOUNIT1_MAX_RATE_6_0 (0xA0)
2227 #define MPI25_SASIOUNIT1_MAX_RATE_12_0 (0xB0)
2228 #define MPI2_SASIOUNIT1_MIN_RATE_MASK (0x0F)
2229 #define MPI2_SASIOUNIT1_MIN_RATE_1_5 (0x08)
2230 #define MPI2_SASIOUNIT1_MIN_RATE_3_0 (0x09)
2231 #define MPI2_SASIOUNIT1_MIN_RATE_6_0 (0x0A)
2232 #define MPI25_SASIOUNIT1_MIN_RATE_12_0 (0x0B)
2234 /*see mpi2_sas.h for values for
2235 *SAS IO Unit Page 1 ControllerPhyDeviceInfo values */
2238 /*SAS IO Unit Page 4 (for MPI v2.5 and earlier) */
2240 typedef struct _MPI2_SAS_IOUNIT4_SPINUP_GROUP {
2241 U8 MaxTargetSpinup; /*0x00 */
2242 U8 SpinupDelay; /*0x01 */
2243 U8 SpinupFlags; /*0x02 */
2244 U8 Reserved1; /*0x03 */
2245 } MPI2_SAS_IOUNIT4_SPINUP_GROUP,
2246 *PTR_MPI2_SAS_IOUNIT4_SPINUP_GROUP,
2247 Mpi2SasIOUnit4SpinupGroup_t,
2248 *pMpi2SasIOUnit4SpinupGroup_t;
2249 /*defines for SAS IO Unit Page 4 SpinupFlags */
2250 #define MPI2_SASIOUNIT4_SPINUP_DISABLE_FLAG (0x01)
2254 *Host code (drivers, BIOS, utilities, etc.) should leave this define set to
2255 *one and check the value returned for NumPhys at runtime.
2257 #ifndef MPI2_SAS_IOUNIT4_PHY_MAX
2258 #define MPI2_SAS_IOUNIT4_PHY_MAX (4)
2261 typedef struct _MPI2_CONFIG_PAGE_SASIOUNIT_4 {
2262 MPI2_CONFIG_EXTENDED_PAGE_HEADER Header;/*0x00 */
2263 MPI2_SAS_IOUNIT4_SPINUP_GROUP
2264 SpinupGroupParameters[4]; /*0x08 */
2266 Reserved1; /*0x18 */
2268 Reserved2; /*0x1C */
2270 Reserved3; /*0x20 */
2272 BootDeviceWaitTime; /*0x24 */
2274 Reserved4; /*0x25 */
2276 Reserved5; /*0x26 */
2280 PEInitialSpinupDelay; /*0x29 */
2282 PEReplyDelay; /*0x2A */
2286 PHY[MPI2_SAS_IOUNIT4_PHY_MAX]; /*0x2C */
2287 } MPI2_CONFIG_PAGE_SASIOUNIT_4,
2288 *PTR_MPI2_CONFIG_PAGE_SASIOUNIT_4,
2289 Mpi2SasIOUnitPage4_t, *pMpi2SasIOUnitPage4_t;
2291 #define MPI2_SASIOUNITPAGE4_PAGEVERSION (0x02)
2293 /*defines for Flags field */
2294 #define MPI2_SASIOUNIT4_FLAGS_AUTO_PORTENABLE (0x01)
2296 /*defines for PHY field */
2297 #define MPI2_SASIOUNIT4_PHY_SPINUP_GROUP_MASK (0x03)
2300 /*SAS IO Unit Page 5 */
2302 typedef struct _MPI2_SAS_IO_UNIT5_PHY_PM_SETTINGS {
2303 U8 ControlFlags; /*0x00 */
2304 U8 PortWidthModGroup; /*0x01 */
2305 U16 InactivityTimerExponent; /*0x02 */
2306 U8 SATAPartialTimeout; /*0x04 */
2307 U8 Reserved2; /*0x05 */
2308 U8 SATASlumberTimeout; /*0x06 */
2309 U8 Reserved3; /*0x07 */
2310 U8 SASPartialTimeout; /*0x08 */
2311 U8 Reserved4; /*0x09 */
2312 U8 SASSlumberTimeout; /*0x0A */
2313 U8 Reserved5; /*0x0B */
2314 } MPI2_SAS_IO_UNIT5_PHY_PM_SETTINGS,
2315 *PTR_MPI2_SAS_IO_UNIT5_PHY_PM_SETTINGS,
2316 Mpi2SasIOUnit5PhyPmSettings_t,
2317 *pMpi2SasIOUnit5PhyPmSettings_t;
2319 /*defines for ControlFlags field */
2320 #define MPI2_SASIOUNIT5_CONTROL_SAS_SLUMBER_ENABLE (0x08)
2321 #define MPI2_SASIOUNIT5_CONTROL_SAS_PARTIAL_ENABLE (0x04)
2322 #define MPI2_SASIOUNIT5_CONTROL_SATA_SLUMBER_ENABLE (0x02)
2323 #define MPI2_SASIOUNIT5_CONTROL_SATA_PARTIAL_ENABLE (0x01)
2325 /*defines for PortWidthModeGroup field */
2326 #define MPI2_SASIOUNIT5_PWMG_DISABLE (0xFF)
2328 /*defines for InactivityTimerExponent field */
2329 #define MPI2_SASIOUNIT5_ITE_MASK_SAS_SLUMBER (0x7000)
2330 #define MPI2_SASIOUNIT5_ITE_SHIFT_SAS_SLUMBER (12)
2331 #define MPI2_SASIOUNIT5_ITE_MASK_SAS_PARTIAL (0x0700)
2332 #define MPI2_SASIOUNIT5_ITE_SHIFT_SAS_PARTIAL (8)
2333 #define MPI2_SASIOUNIT5_ITE_MASK_SATA_SLUMBER (0x0070)
2334 #define MPI2_SASIOUNIT5_ITE_SHIFT_SATA_SLUMBER (4)
2335 #define MPI2_SASIOUNIT5_ITE_MASK_SATA_PARTIAL (0x0007)
2336 #define MPI2_SASIOUNIT5_ITE_SHIFT_SATA_PARTIAL (0)
2338 #define MPI2_SASIOUNIT5_ITE_TEN_SECONDS (7)
2339 #define MPI2_SASIOUNIT5_ITE_ONE_SECOND (6)
2340 #define MPI2_SASIOUNIT5_ITE_HUNDRED_MILLISECONDS (5)
2341 #define MPI2_SASIOUNIT5_ITE_TEN_MILLISECONDS (4)
2342 #define MPI2_SASIOUNIT5_ITE_ONE_MILLISECOND (3)
2343 #define MPI2_SASIOUNIT5_ITE_HUNDRED_MICROSECONDS (2)
2344 #define MPI2_SASIOUNIT5_ITE_TEN_MICROSECONDS (1)
2345 #define MPI2_SASIOUNIT5_ITE_ONE_MICROSECOND (0)
2348 *Host code (drivers, BIOS, utilities, etc.) should leave this define set to
2349 *one and check the value returned for NumPhys at runtime.
2351 #ifndef MPI2_SAS_IOUNIT5_PHY_MAX
2352 #define MPI2_SAS_IOUNIT5_PHY_MAX (1)
2355 typedef struct _MPI2_CONFIG_PAGE_SASIOUNIT_5 {
2356 MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /*0x00 */
2357 U8 NumPhys; /*0x08 */
2358 U8 Reserved1;/*0x09 */
2359 U16 Reserved2;/*0x0A */
2360 U32 Reserved3;/*0x0C */
2361 MPI2_SAS_IO_UNIT5_PHY_PM_SETTINGS
2362 SASPhyPowerManagementSettings[MPI2_SAS_IOUNIT5_PHY_MAX];/*0x10 */
2363 } MPI2_CONFIG_PAGE_SASIOUNIT_5,
2364 *PTR_MPI2_CONFIG_PAGE_SASIOUNIT_5,
2365 Mpi2SasIOUnitPage5_t, *pMpi2SasIOUnitPage5_t;
2367 #define MPI2_SASIOUNITPAGE5_PAGEVERSION (0x01)
2370 /*SAS IO Unit Page 6 */
2372 typedef struct _MPI2_SAS_IO_UNIT6_PORT_WIDTH_MOD_GROUP_STATUS {
2373 U8 CurrentStatus; /*0x00 */
2374 U8 CurrentModulation; /*0x01 */
2375 U8 CurrentUtilization; /*0x02 */
2376 U8 Reserved1; /*0x03 */
2377 U32 Reserved2; /*0x04 */
2378 } MPI2_SAS_IO_UNIT6_PORT_WIDTH_MOD_GROUP_STATUS,
2379 *PTR_MPI2_SAS_IO_UNIT6_PORT_WIDTH_MOD_GROUP_STATUS,
2380 Mpi2SasIOUnit6PortWidthModGroupStatus_t,
2381 *pMpi2SasIOUnit6PortWidthModGroupStatus_t;
2383 /*defines for CurrentStatus field */
2384 #define MPI2_SASIOUNIT6_STATUS_UNAVAILABLE (0x00)
2385 #define MPI2_SASIOUNIT6_STATUS_UNCONFIGURED (0x01)
2386 #define MPI2_SASIOUNIT6_STATUS_INVALID_CONFIG (0x02)
2387 #define MPI2_SASIOUNIT6_STATUS_LINK_DOWN (0x03)
2388 #define MPI2_SASIOUNIT6_STATUS_OBSERVATION_ONLY (0x04)
2389 #define MPI2_SASIOUNIT6_STATUS_INACTIVE (0x05)
2390 #define MPI2_SASIOUNIT6_STATUS_ACTIVE_IOUNIT (0x06)
2391 #define MPI2_SASIOUNIT6_STATUS_ACTIVE_HOST (0x07)
2393 /*defines for CurrentModulation field */
2394 #define MPI2_SASIOUNIT6_MODULATION_25_PERCENT (0x00)
2395 #define MPI2_SASIOUNIT6_MODULATION_50_PERCENT (0x01)
2396 #define MPI2_SASIOUNIT6_MODULATION_75_PERCENT (0x02)
2397 #define MPI2_SASIOUNIT6_MODULATION_100_PERCENT (0x03)
2400 *Host code (drivers, BIOS, utilities, etc.) should leave this define set to
2401 *one and check the value returned for NumGroups at runtime.
2403 #ifndef MPI2_SAS_IOUNIT6_GROUP_MAX
2404 #define MPI2_SAS_IOUNIT6_GROUP_MAX (1)
2407 typedef struct _MPI2_CONFIG_PAGE_SASIOUNIT_6 {
2408 MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /*0x00 */
2409 U32 Reserved1; /*0x08 */
2410 U32 Reserved2; /*0x0C */
2411 U8 NumGroups; /*0x10 */
2412 U8 Reserved3; /*0x11 */
2413 U16 Reserved4; /*0x12 */
2414 MPI2_SAS_IO_UNIT6_PORT_WIDTH_MOD_GROUP_STATUS
2415 PortWidthModulationGroupStatus[MPI2_SAS_IOUNIT6_GROUP_MAX]; /*0x14 */
2416 } MPI2_CONFIG_PAGE_SASIOUNIT_6,
2417 *PTR_MPI2_CONFIG_PAGE_SASIOUNIT_6,
2418 Mpi2SasIOUnitPage6_t, *pMpi2SasIOUnitPage6_t;
2420 #define MPI2_SASIOUNITPAGE6_PAGEVERSION (0x00)
2423 /*SAS IO Unit Page 7 */
2425 typedef struct _MPI2_SAS_IO_UNIT7_PORT_WIDTH_MOD_GROUP_SETTINGS {
2427 U8 Reserved1; /*0x01 */
2428 U16 Reserved2; /*0x02 */
2429 U8 Threshold75Pct; /*0x04 */
2430 U8 Threshold50Pct; /*0x05 */
2431 U8 Threshold25Pct; /*0x06 */
2432 U8 Reserved3; /*0x07 */
2433 } MPI2_SAS_IO_UNIT7_PORT_WIDTH_MOD_GROUP_SETTINGS,
2434 *PTR_MPI2_SAS_IO_UNIT7_PORT_WIDTH_MOD_GROUP_SETTINGS,
2435 Mpi2SasIOUnit7PortWidthModGroupSettings_t,
2436 *pMpi2SasIOUnit7PortWidthModGroupSettings_t;
2438 /*defines for Flags field */
2439 #define MPI2_SASIOUNIT7_FLAGS_ENABLE_PORT_WIDTH_MODULATION (0x01)
2443 *Host code (drivers, BIOS, utilities, etc.) should leave this define set to
2444 *one and check the value returned for NumGroups at runtime.
2446 #ifndef MPI2_SAS_IOUNIT7_GROUP_MAX
2447 #define MPI2_SAS_IOUNIT7_GROUP_MAX (1)
2450 typedef struct _MPI2_CONFIG_PAGE_SASIOUNIT_7 {
2451 MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /*0x00 */
2452 U8 SamplingInterval; /*0x08 */
2453 U8 WindowLength; /*0x09 */
2454 U16 Reserved1; /*0x0A */
2455 U32 Reserved2; /*0x0C */
2456 U32 Reserved3; /*0x10 */
2457 U8 NumGroups; /*0x14 */
2458 U8 Reserved4; /*0x15 */
2459 U16 Reserved5; /*0x16 */
2460 MPI2_SAS_IO_UNIT7_PORT_WIDTH_MOD_GROUP_SETTINGS
2461 PortWidthModulationGroupSettings[MPI2_SAS_IOUNIT7_GROUP_MAX];/*0x18 */
2462 } MPI2_CONFIG_PAGE_SASIOUNIT_7,
2463 *PTR_MPI2_CONFIG_PAGE_SASIOUNIT_7,
2464 Mpi2SasIOUnitPage7_t, *pMpi2SasIOUnitPage7_t;
2466 #define MPI2_SASIOUNITPAGE7_PAGEVERSION (0x00)
2469 /*SAS IO Unit Page 8 */
2471 typedef struct _MPI2_CONFIG_PAGE_SASIOUNIT_8 {
2472 MPI2_CONFIG_EXTENDED_PAGE_HEADER
2475 Reserved1; /*0x08 */
2477 PowerManagementCapabilities; /*0x0C */
2479 TxRxSleepStatus; /*0x10 */
2481 Reserved2; /*0x11 */
2483 Reserved3; /*0x12 */
2484 } MPI2_CONFIG_PAGE_SASIOUNIT_8,
2485 *PTR_MPI2_CONFIG_PAGE_SASIOUNIT_8,
2486 Mpi2SasIOUnitPage8_t, *pMpi2SasIOUnitPage8_t;
2488 #define MPI2_SASIOUNITPAGE8_PAGEVERSION (0x00)
2490 /*defines for PowerManagementCapabilities field */
2491 #define MPI2_SASIOUNIT8_PM_HOST_PORT_WIDTH_MOD (0x00001000)
2492 #define MPI2_SASIOUNIT8_PM_HOST_SAS_SLUMBER_MODE (0x00000800)
2493 #define MPI2_SASIOUNIT8_PM_HOST_SAS_PARTIAL_MODE (0x00000400)
2494 #define MPI2_SASIOUNIT8_PM_HOST_SATA_SLUMBER_MODE (0x00000200)
2495 #define MPI2_SASIOUNIT8_PM_HOST_SATA_PARTIAL_MODE (0x00000100)
2496 #define MPI2_SASIOUNIT8_PM_IOUNIT_PORT_WIDTH_MOD (0x00000010)
2497 #define MPI2_SASIOUNIT8_PM_IOUNIT_SAS_SLUMBER_MODE (0x00000008)
2498 #define MPI2_SASIOUNIT8_PM_IOUNIT_SAS_PARTIAL_MODE (0x00000004)
2499 #define MPI2_SASIOUNIT8_PM_IOUNIT_SATA_SLUMBER_MODE (0x00000002)
2500 #define MPI2_SASIOUNIT8_PM_IOUNIT_SATA_PARTIAL_MODE (0x00000001)
2502 /*defines for TxRxSleepStatus field */
2503 #define MPI25_SASIOUNIT8_TXRXSLEEP_UNSUPPORTED (0x00)
2504 #define MPI25_SASIOUNIT8_TXRXSLEEP_DISENGAGED (0x01)
2505 #define MPI25_SASIOUNIT8_TXRXSLEEP_ACTIVE (0x02)
2506 #define MPI25_SASIOUNIT8_TXRXSLEEP_SHUTDOWN (0x03)
2510 /*SAS IO Unit Page 16 */
2512 typedef struct _MPI2_CONFIG_PAGE_SASIOUNIT16 {
2513 MPI2_CONFIG_EXTENDED_PAGE_HEADER
2516 TimeStamp; /*0x08 */
2518 Reserved1; /*0x10 */
2520 Reserved2; /*0x14 */
2522 FastPathPendedRequests; /*0x18 */
2524 FastPathUnPendedRequests; /*0x1C */
2526 FastPathHostRequestStarts; /*0x20 */
2528 FastPathFirmwareRequestStarts; /*0x24 */
2530 FastPathHostCompletions; /*0x28 */
2532 FastPathFirmwareCompletions; /*0x2C */
2534 NonFastPathRequestStarts; /*0x30 */
2536 NonFastPathHostCompletions; /*0x30 */
2537 } MPI2_CONFIG_PAGE_SASIOUNIT16,
2538 *PTR_MPI2_CONFIG_PAGE_SASIOUNIT16,
2539 Mpi2SasIOUnitPage16_t, *pMpi2SasIOUnitPage16_t;
2541 #define MPI2_SASIOUNITPAGE16_PAGEVERSION (0x00)
2544 /****************************************************************************
2545 * SAS Expander Config Pages
2546 ****************************************************************************/
2548 /*SAS Expander Page 0 */
2550 typedef struct _MPI2_CONFIG_PAGE_EXPANDER_0 {
2551 MPI2_CONFIG_EXTENDED_PAGE_HEADER
2554 PhysicalPort; /*0x08 */
2556 ReportGenLength; /*0x09 */
2558 EnclosureHandle; /*0x0A */
2560 SASAddress; /*0x0C */
2562 DiscoveryStatus; /*0x14 */
2564 DevHandle; /*0x18 */
2566 ParentDevHandle; /*0x1A */
2568 ExpanderChangeCount; /*0x1C */
2570 ExpanderRouteIndexes; /*0x1E */
2578 STPBusInactivityTimeLimit; /*0x24 */
2580 STPMaxConnectTimeLimit; /*0x26 */
2582 STP_SMP_NexusLossTime; /*0x28 */
2584 MaxNumRoutedSasAddresses; /*0x2A */
2586 ActiveZoneManagerSASAddress;/*0x2C */
2588 ZoneLockInactivityLimit; /*0x34 */
2590 Reserved1; /*0x36 */
2592 TimeToReducedFunc; /*0x38 */
2594 InitialTimeToReducedFunc; /*0x39 */
2596 MaxReducedFuncTime; /*0x3A */
2598 Reserved2; /*0x3B */
2599 } MPI2_CONFIG_PAGE_EXPANDER_0,
2600 *PTR_MPI2_CONFIG_PAGE_EXPANDER_0,
2601 Mpi2ExpanderPage0_t, *pMpi2ExpanderPage0_t;
2603 #define MPI2_SASEXPANDER0_PAGEVERSION (0x06)
2605 /*values for SAS Expander Page 0 DiscoveryStatus field */
2606 #define MPI2_SAS_EXPANDER0_DS_MAX_ENCLOSURES_EXCEED (0x80000000)
2607 #define MPI2_SAS_EXPANDER0_DS_MAX_EXPANDERS_EXCEED (0x40000000)
2608 #define MPI2_SAS_EXPANDER0_DS_MAX_DEVICES_EXCEED (0x20000000)
2609 #define MPI2_SAS_EXPANDER0_DS_MAX_TOPO_PHYS_EXCEED (0x10000000)
2610 #define MPI2_SAS_EXPANDER0_DS_DOWNSTREAM_INITIATOR (0x08000000)
2611 #define MPI2_SAS_EXPANDER0_DS_MULTI_SUBTRACTIVE_SUBTRACTIVE (0x00008000)
2612 #define MPI2_SAS_EXPANDER0_DS_EXP_MULTI_SUBTRACTIVE (0x00004000)
2613 #define MPI2_SAS_EXPANDER0_DS_MULTI_PORT_DOMAIN (0x00002000)
2614 #define MPI2_SAS_EXPANDER0_DS_TABLE_TO_SUBTRACTIVE_LINK (0x00001000)
2615 #define MPI2_SAS_EXPANDER0_DS_UNSUPPORTED_DEVICE (0x00000800)
2616 #define MPI2_SAS_EXPANDER0_DS_TABLE_LINK (0x00000400)
2617 #define MPI2_SAS_EXPANDER0_DS_SUBTRACTIVE_LINK (0x00000200)
2618 #define MPI2_SAS_EXPANDER0_DS_SMP_CRC_ERROR (0x00000100)
2619 #define MPI2_SAS_EXPANDER0_DS_SMP_FUNCTION_FAILED (0x00000080)
2620 #define MPI2_SAS_EXPANDER0_DS_INDEX_NOT_EXIST (0x00000040)
2621 #define MPI2_SAS_EXPANDER0_DS_OUT_ROUTE_ENTRIES (0x00000020)
2622 #define MPI2_SAS_EXPANDER0_DS_SMP_TIMEOUT (0x00000010)
2623 #define MPI2_SAS_EXPANDER0_DS_MULTIPLE_PORTS (0x00000004)
2624 #define MPI2_SAS_EXPANDER0_DS_UNADDRESSABLE_DEVICE (0x00000002)
2625 #define MPI2_SAS_EXPANDER0_DS_LOOP_DETECTED (0x00000001)
2627 /*values for SAS Expander Page 0 Flags field */
2628 #define MPI2_SAS_EXPANDER0_FLAGS_REDUCED_FUNCTIONALITY (0x2000)
2629 #define MPI2_SAS_EXPANDER0_FLAGS_ZONE_LOCKED (0x1000)
2630 #define MPI2_SAS_EXPANDER0_FLAGS_SUPPORTED_PHYSICAL_PRES (0x0800)
2631 #define MPI2_SAS_EXPANDER0_FLAGS_ASSERTED_PHYSICAL_PRES (0x0400)
2632 #define MPI2_SAS_EXPANDER0_FLAGS_ZONING_SUPPORT (0x0200)
2633 #define MPI2_SAS_EXPANDER0_FLAGS_ENABLED_ZONING (0x0100)
2634 #define MPI2_SAS_EXPANDER0_FLAGS_TABLE_TO_TABLE_SUPPORT (0x0080)
2635 #define MPI2_SAS_EXPANDER0_FLAGS_CONNECTOR_END_DEVICE (0x0010)
2636 #define MPI2_SAS_EXPANDER0_FLAGS_OTHERS_CONFIG (0x0004)
2637 #define MPI2_SAS_EXPANDER0_FLAGS_CONFIG_IN_PROGRESS (0x0002)
2638 #define MPI2_SAS_EXPANDER0_FLAGS_ROUTE_TABLE_CONFIG (0x0001)
2641 /*SAS Expander Page 1 */
2643 typedef struct _MPI2_CONFIG_PAGE_EXPANDER_1 {
2644 MPI2_CONFIG_EXTENDED_PAGE_HEADER
2647 PhysicalPort; /*0x08 */
2649 Reserved1; /*0x09 */
2651 Reserved2; /*0x0A */
2657 NumTableEntriesProgrammed; /*0x0E */
2659 ProgrammedLinkRate; /*0x10 */
2661 HwLinkRate; /*0x11 */
2663 AttachedDevHandle; /*0x12 */
2667 AttachedDeviceInfo; /*0x18 */
2669 ExpanderDevHandle; /*0x1C */
2671 ChangeCount; /*0x1E */
2673 NegotiatedLinkRate; /*0x1F */
2675 PhyIdentifier; /*0x20 */
2677 AttachedPhyIdentifier; /*0x21 */
2679 Reserved3; /*0x22 */
2681 DiscoveryInfo; /*0x23 */
2683 AttachedPhyInfo; /*0x24 */
2685 ZoneGroup; /*0x28 */
2687 SelfConfigStatus; /*0x29 */
2689 Reserved4; /*0x2A */
2690 } MPI2_CONFIG_PAGE_EXPANDER_1,
2691 *PTR_MPI2_CONFIG_PAGE_EXPANDER_1,
2692 Mpi2ExpanderPage1_t, *pMpi2ExpanderPage1_t;
2694 #define MPI2_SASEXPANDER1_PAGEVERSION (0x02)
2696 /*use MPI2_SAS_PRATE_ defines for the ProgrammedLinkRate field */
2698 /*use MPI2_SAS_HWRATE_ defines for the HwLinkRate field */
2700 /*use MPI2_SAS_PHYINFO_ for the PhyInfo field */
2702 /*see mpi2_sas.h for the MPI2_SAS_DEVICE_INFO_ defines
2703 *used for the AttachedDeviceInfo field */
2705 /*use MPI2_SAS_NEG_LINK_RATE_ defines for the NegotiatedLinkRate field */
2707 /*values for SAS Expander Page 1 DiscoveryInfo field */
2708 #define MPI2_SAS_EXPANDER1_DISCINFO_BAD_PHY_DISABLED (0x04)
2709 #define MPI2_SAS_EXPANDER1_DISCINFO_LINK_STATUS_CHANGE (0x02)
2710 #define MPI2_SAS_EXPANDER1_DISCINFO_NO_ROUTING_ENTRIES (0x01)
2712 /*use MPI2_SAS_APHYINFO_ defines for AttachedPhyInfo field */
2715 /****************************************************************************
2716 * SAS Device Config Pages
2717 ****************************************************************************/
2719 /*SAS Device Page 0 */
2721 typedef struct _MPI2_CONFIG_PAGE_SAS_DEV_0 {
2722 MPI2_CONFIG_EXTENDED_PAGE_HEADER
2727 EnclosureHandle; /*0x0A */
2729 SASAddress; /*0x0C */
2731 ParentDevHandle; /*0x14 */
2735 AccessStatus; /*0x17 */
2737 DevHandle; /*0x18 */
2739 AttachedPhyIdentifier; /*0x1A */
2741 ZoneGroup; /*0x1B */
2743 DeviceInfo; /*0x1C */
2747 PhysicalPort; /*0x22 */
2749 MaxPortConnections; /*0x23 */
2751 DeviceName; /*0x24 */
2753 PortGroups; /*0x2C */
2757 ControlGroup; /*0x2E */
2759 EnclosureLevel; /*0x2F */
2761 ConnectorName[4]; /*0x30 */
2763 Reserved3; /*0x34 */
2764 } MPI2_CONFIG_PAGE_SAS_DEV_0,
2765 *PTR_MPI2_CONFIG_PAGE_SAS_DEV_0,
2766 Mpi2SasDevicePage0_t,
2767 *pMpi2SasDevicePage0_t;
2769 #define MPI2_SASDEVICE0_PAGEVERSION (0x09)
2771 /*values for SAS Device Page 0 AccessStatus field */
2772 #define MPI2_SAS_DEVICE0_ASTATUS_NO_ERRORS (0x00)
2773 #define MPI2_SAS_DEVICE0_ASTATUS_SATA_INIT_FAILED (0x01)
2774 #define MPI2_SAS_DEVICE0_ASTATUS_SATA_CAPABILITY_FAILED (0x02)
2775 #define MPI2_SAS_DEVICE0_ASTATUS_SATA_AFFILIATION_CONFLICT (0x03)
2776 #define MPI2_SAS_DEVICE0_ASTATUS_SATA_NEEDS_INITIALIZATION (0x04)
2777 #define MPI2_SAS_DEVICE0_ASTATUS_ROUTE_NOT_ADDRESSABLE (0x05)
2778 #define MPI2_SAS_DEVICE0_ASTATUS_SMP_ERROR_NOT_ADDRESSABLE (0x06)
2779 #define MPI2_SAS_DEVICE0_ASTATUS_DEVICE_BLOCKED (0x07)
2780 /*specific values for SATA Init failures */
2781 #define MPI2_SAS_DEVICE0_ASTATUS_SIF_UNKNOWN (0x10)
2782 #define MPI2_SAS_DEVICE0_ASTATUS_SIF_AFFILIATION_CONFLICT (0x11)
2783 #define MPI2_SAS_DEVICE0_ASTATUS_SIF_DIAG (0x12)
2784 #define MPI2_SAS_DEVICE0_ASTATUS_SIF_IDENTIFICATION (0x13)
2785 #define MPI2_SAS_DEVICE0_ASTATUS_SIF_CHECK_POWER (0x14)
2786 #define MPI2_SAS_DEVICE0_ASTATUS_SIF_PIO_SN (0x15)
2787 #define MPI2_SAS_DEVICE0_ASTATUS_SIF_MDMA_SN (0x16)
2788 #define MPI2_SAS_DEVICE0_ASTATUS_SIF_UDMA_SN (0x17)
2789 #define MPI2_SAS_DEVICE0_ASTATUS_SIF_ZONING_VIOLATION (0x18)
2790 #define MPI2_SAS_DEVICE0_ASTATUS_SIF_NOT_ADDRESSABLE (0x19)
2791 #define MPI2_SAS_DEVICE0_ASTATUS_SIF_MAX (0x1F)
2793 /*see mpi2_sas.h for values for SAS Device Page 0 DeviceInfo values */
2795 /*values for SAS Device Page 0 Flags field */
2796 #define MPI2_SAS_DEVICE0_FLAGS_UNAUTHORIZED_DEVICE (0x8000)
2797 #define MPI25_SAS_DEVICE0_FLAGS_ENABLED_FAST_PATH (0x4000)
2798 #define MPI25_SAS_DEVICE0_FLAGS_FAST_PATH_CAPABLE (0x2000)
2799 #define MPI2_SAS_DEVICE0_FLAGS_SLUMBER_PM_CAPABLE (0x1000)
2800 #define MPI2_SAS_DEVICE0_FLAGS_PARTIAL_PM_CAPABLE (0x0800)
2801 #define MPI2_SAS_DEVICE0_FLAGS_SATA_ASYNCHRONOUS_NOTIFY (0x0400)
2802 #define MPI2_SAS_DEVICE0_FLAGS_SATA_SW_PRESERVE (0x0200)
2803 #define MPI2_SAS_DEVICE0_FLAGS_UNSUPPORTED_DEVICE (0x0100)
2804 #define MPI2_SAS_DEVICE0_FLAGS_SATA_48BIT_LBA_SUPPORTED (0x0080)
2805 #define MPI2_SAS_DEVICE0_FLAGS_SATA_SMART_SUPPORTED (0x0040)
2806 #define MPI2_SAS_DEVICE0_FLAGS_SATA_NCQ_SUPPORTED (0x0020)
2807 #define MPI2_SAS_DEVICE0_FLAGS_SATA_FUA_SUPPORTED (0x0010)
2808 #define MPI2_SAS_DEVICE0_FLAGS_PORT_SELECTOR_ATTACH (0x0008)
2809 #define MPI2_SAS_DEVICE0_FLAGS_PERSIST_CAPABLE (0x0004)
2810 #define MPI2_SAS_DEVICE0_FLAGS_ENCL_LEVEL_VALID (0x0002)
2811 #define MPI2_SAS_DEVICE0_FLAGS_DEVICE_PRESENT (0x0001)
2814 /*SAS Device Page 1 */
2816 typedef struct _MPI2_CONFIG_PAGE_SAS_DEV_1 {
2817 MPI2_CONFIG_EXTENDED_PAGE_HEADER
2820 Reserved1; /*0x08 */
2822 SASAddress; /*0x0C */
2824 Reserved2; /*0x14 */
2826 DevHandle; /*0x18 */
2828 Reserved3; /*0x1A */
2830 InitialRegDeviceFIS[20];/*0x1C */
2831 } MPI2_CONFIG_PAGE_SAS_DEV_1,
2832 *PTR_MPI2_CONFIG_PAGE_SAS_DEV_1,
2833 Mpi2SasDevicePage1_t,
2834 *pMpi2SasDevicePage1_t;
2836 #define MPI2_SASDEVICE1_PAGEVERSION (0x01)
2839 /****************************************************************************
2840 * SAS PHY Config Pages
2841 ****************************************************************************/
2845 typedef struct _MPI2_CONFIG_PAGE_SAS_PHY_0 {
2846 MPI2_CONFIG_EXTENDED_PAGE_HEADER
2849 OwnerDevHandle; /*0x08 */
2851 Reserved1; /*0x0A */
2853 AttachedDevHandle; /*0x0C */
2855 AttachedPhyIdentifier; /*0x0E */
2857 Reserved2; /*0x0F */
2859 AttachedPhyInfo; /*0x10 */
2861 ProgrammedLinkRate; /*0x14 */
2863 HwLinkRate; /*0x15 */
2865 ChangeCount; /*0x16 */
2871 NegotiatedLinkRate; /*0x1C */
2873 Reserved3; /*0x1D */
2875 Reserved4; /*0x1E */
2876 } MPI2_CONFIG_PAGE_SAS_PHY_0,
2877 *PTR_MPI2_CONFIG_PAGE_SAS_PHY_0,
2878 Mpi2SasPhyPage0_t, *pMpi2SasPhyPage0_t;
2880 #define MPI2_SASPHY0_PAGEVERSION (0x03)
2882 /*use MPI2_SAS_APHYINFO_ defines for AttachedPhyInfo field */
2884 /*use MPI2_SAS_PRATE_ defines for the ProgrammedLinkRate field */
2886 /*use MPI2_SAS_HWRATE_ defines for the HwLinkRate field */
2888 /*values for SAS PHY Page 0 Flags field */
2889 #define MPI2_SAS_PHY0_FLAGS_SGPIO_DIRECT_ATTACH_ENC (0x01)
2891 /*use MPI2_SAS_PHYINFO_ for the PhyInfo field */
2893 /*use MPI2_SAS_NEG_LINK_RATE_ defines for the NegotiatedLinkRate field */
2898 typedef struct _MPI2_CONFIG_PAGE_SAS_PHY_1 {
2899 MPI2_CONFIG_EXTENDED_PAGE_HEADER
2902 Reserved1; /*0x08 */
2904 InvalidDwordCount; /*0x0C */
2906 RunningDisparityErrorCount; /*0x10 */
2908 LossDwordSynchCount; /*0x14 */
2910 PhyResetProblemCount; /*0x18 */
2911 } MPI2_CONFIG_PAGE_SAS_PHY_1,
2912 *PTR_MPI2_CONFIG_PAGE_SAS_PHY_1,
2913 Mpi2SasPhyPage1_t, *pMpi2SasPhyPage1_t;
2915 #define MPI2_SASPHY1_PAGEVERSION (0x01)
2920 typedef struct _MPI2_SASPHY2_PHY_EVENT {
2921 U8 PhyEventCode; /*0x00 */
2922 U8 Reserved1; /*0x01 */
2923 U16 Reserved2; /*0x02 */
2924 U32 PhyEventInfo; /*0x04 */
2925 } MPI2_SASPHY2_PHY_EVENT, *PTR_MPI2_SASPHY2_PHY_EVENT,
2926 Mpi2SasPhy2PhyEvent_t, *pMpi2SasPhy2PhyEvent_t;
2928 /*use MPI2_SASPHY3_EVENT_CODE_ for the PhyEventCode field */
2932 *Host code (drivers, BIOS, utilities, etc.) should leave this define set to
2933 *one and check the value returned for NumPhyEvents at runtime.
2935 #ifndef MPI2_SASPHY2_PHY_EVENT_MAX
2936 #define MPI2_SASPHY2_PHY_EVENT_MAX (1)
2939 typedef struct _MPI2_CONFIG_PAGE_SAS_PHY_2 {
2940 MPI2_CONFIG_EXTENDED_PAGE_HEADER
2943 Reserved1; /*0x08 */
2945 NumPhyEvents; /*0x0C */
2947 Reserved2; /*0x0D */
2949 Reserved3; /*0x0E */
2950 MPI2_SASPHY2_PHY_EVENT
2951 PhyEvent[MPI2_SASPHY2_PHY_EVENT_MAX]; /*0x10 */
2952 } MPI2_CONFIG_PAGE_SAS_PHY_2,
2953 *PTR_MPI2_CONFIG_PAGE_SAS_PHY_2,
2955 *pMpi2SasPhyPage2_t;
2957 #define MPI2_SASPHY2_PAGEVERSION (0x00)
2962 typedef struct _MPI2_SASPHY3_PHY_EVENT_CONFIG {
2963 U8 PhyEventCode; /*0x00 */
2964 U8 Reserved1; /*0x01 */
2965 U16 Reserved2; /*0x02 */
2966 U8 CounterType; /*0x04 */
2967 U8 ThresholdWindow; /*0x05 */
2968 U8 TimeUnits; /*0x06 */
2969 U8 Reserved3; /*0x07 */
2970 U32 EventThreshold; /*0x08 */
2971 U16 ThresholdFlags; /*0x0C */
2972 U16 Reserved4; /*0x0E */
2973 } MPI2_SASPHY3_PHY_EVENT_CONFIG,
2974 *PTR_MPI2_SASPHY3_PHY_EVENT_CONFIG,
2975 Mpi2SasPhy3PhyEventConfig_t,
2976 *pMpi2SasPhy3PhyEventConfig_t;
2978 /*values for PhyEventCode field */
2979 #define MPI2_SASPHY3_EVENT_CODE_NO_EVENT (0x00)
2980 #define MPI2_SASPHY3_EVENT_CODE_INVALID_DWORD (0x01)
2981 #define MPI2_SASPHY3_EVENT_CODE_RUNNING_DISPARITY_ERROR (0x02)
2982 #define MPI2_SASPHY3_EVENT_CODE_LOSS_DWORD_SYNC (0x03)
2983 #define MPI2_SASPHY3_EVENT_CODE_PHY_RESET_PROBLEM (0x04)
2984 #define MPI2_SASPHY3_EVENT_CODE_ELASTICITY_BUF_OVERFLOW (0x05)
2985 #define MPI2_SASPHY3_EVENT_CODE_RX_ERROR (0x06)
2986 #define MPI2_SASPHY3_EVENT_CODE_RX_ADDR_FRAME_ERROR (0x20)
2987 #define MPI2_SASPHY3_EVENT_CODE_TX_AC_OPEN_REJECT (0x21)
2988 #define MPI2_SASPHY3_EVENT_CODE_RX_AC_OPEN_REJECT (0x22)
2989 #define MPI2_SASPHY3_EVENT_CODE_TX_RC_OPEN_REJECT (0x23)
2990 #define MPI2_SASPHY3_EVENT_CODE_RX_RC_OPEN_REJECT (0x24)
2991 #define MPI2_SASPHY3_EVENT_CODE_RX_AIP_PARTIAL_WAITING_ON (0x25)
2992 #define MPI2_SASPHY3_EVENT_CODE_RX_AIP_CONNECT_WAITING_ON (0x26)
2993 #define MPI2_SASPHY3_EVENT_CODE_TX_BREAK (0x27)
2994 #define MPI2_SASPHY3_EVENT_CODE_RX_BREAK (0x28)
2995 #define MPI2_SASPHY3_EVENT_CODE_BREAK_TIMEOUT (0x29)
2996 #define MPI2_SASPHY3_EVENT_CODE_CONNECTION (0x2A)
2997 #define MPI2_SASPHY3_EVENT_CODE_PEAKTX_PATHWAY_BLOCKED (0x2B)
2998 #define MPI2_SASPHY3_EVENT_CODE_PEAKTX_ARB_WAIT_TIME (0x2C)
2999 #define MPI2_SASPHY3_EVENT_CODE_PEAK_ARB_WAIT_TIME (0x2D)
3000 #define MPI2_SASPHY3_EVENT_CODE_PEAK_CONNECT_TIME (0x2E)
3001 #define MPI2_SASPHY3_EVENT_CODE_TX_SSP_FRAMES (0x40)
3002 #define MPI2_SASPHY3_EVENT_CODE_RX_SSP_FRAMES (0x41)
3003 #define MPI2_SASPHY3_EVENT_CODE_TX_SSP_ERROR_FRAMES (0x42)
3004 #define MPI2_SASPHY3_EVENT_CODE_RX_SSP_ERROR_FRAMES (0x43)
3005 #define MPI2_SASPHY3_EVENT_CODE_TX_CREDIT_BLOCKED (0x44)
3006 #define MPI2_SASPHY3_EVENT_CODE_RX_CREDIT_BLOCKED (0x45)
3007 #define MPI2_SASPHY3_EVENT_CODE_TX_SATA_FRAMES (0x50)
3008 #define MPI2_SASPHY3_EVENT_CODE_RX_SATA_FRAMES (0x51)
3009 #define MPI2_SASPHY3_EVENT_CODE_SATA_OVERFLOW (0x52)
3010 #define MPI2_SASPHY3_EVENT_CODE_TX_SMP_FRAMES (0x60)
3011 #define MPI2_SASPHY3_EVENT_CODE_RX_SMP_FRAMES (0x61)
3012 #define MPI2_SASPHY3_EVENT_CODE_RX_SMP_ERROR_FRAMES (0x63)
3013 #define MPI2_SASPHY3_EVENT_CODE_HOTPLUG_TIMEOUT (0xD0)
3014 #define MPI2_SASPHY3_EVENT_CODE_MISALIGNED_MUX_PRIMITIVE (0xD1)
3015 #define MPI2_SASPHY3_EVENT_CODE_RX_AIP (0xD2)
3017 /*Following codes are product specific and in MPI v2.6 and later */
3018 #define MPI2_SASPHY3_EVENT_CODE_LCARB_WAIT_TIME (0xD3)
3019 #define MPI2_SASPHY3_EVENT_CODE_RCVD_CONN_RESP_WAIT_TIME (0xD4)
3020 #define MPI2_SASPHY3_EVENT_CODE_LCCONN_TIME (0xD5)
3021 #define MPI2_SASPHY3_EVENT_CODE_SSP_TX_START_TRANSMIT (0xD6)
3022 #define MPI2_SASPHY3_EVENT_CODE_SATA_TX_START (0xD7)
3023 #define MPI2_SASPHY3_EVENT_CODE_SMP_TX_START_TRANSMT (0xD8)
3024 #define MPI2_SASPHY3_EVENT_CODE_TX_SMP_BREAK_CONN (0xD9)
3025 #define MPI2_SASPHY3_EVENT_CODE_SSP_RX_START_RECEIVE (0xDA)
3026 #define MPI2_SASPHY3_EVENT_CODE_SATA_RX_START_RECEIVE (0xDB)
3027 #define MPI2_SASPHY3_EVENT_CODE_SMP_RX_START_RECEIVE (0xDC)
3030 /*values for the CounterType field */
3031 #define MPI2_SASPHY3_COUNTER_TYPE_WRAPPING (0x00)
3032 #define MPI2_SASPHY3_COUNTER_TYPE_SATURATING (0x01)
3033 #define MPI2_SASPHY3_COUNTER_TYPE_PEAK_VALUE (0x02)
3035 /*values for the TimeUnits field */
3036 #define MPI2_SASPHY3_TIME_UNITS_10_MICROSECONDS (0x00)
3037 #define MPI2_SASPHY3_TIME_UNITS_100_MICROSECONDS (0x01)
3038 #define MPI2_SASPHY3_TIME_UNITS_1_MILLISECOND (0x02)
3039 #define MPI2_SASPHY3_TIME_UNITS_10_MILLISECONDS (0x03)
3041 /*values for the ThresholdFlags field */
3042 #define MPI2_SASPHY3_TFLAGS_PHY_RESET (0x0002)
3043 #define MPI2_SASPHY3_TFLAGS_EVENT_NOTIFY (0x0001)
3046 *Host code (drivers, BIOS, utilities, etc.) should leave this define set to
3047 *one and check the value returned for NumPhyEvents at runtime.
3049 #ifndef MPI2_SASPHY3_PHY_EVENT_MAX
3050 #define MPI2_SASPHY3_PHY_EVENT_MAX (1)
3053 typedef struct _MPI2_CONFIG_PAGE_SAS_PHY_3 {
3054 MPI2_CONFIG_EXTENDED_PAGE_HEADER
3057 Reserved1; /*0x08 */
3059 NumPhyEvents; /*0x0C */
3061 Reserved2; /*0x0D */
3063 Reserved3; /*0x0E */
3064 MPI2_SASPHY3_PHY_EVENT_CONFIG
3065 PhyEventConfig[MPI2_SASPHY3_PHY_EVENT_MAX]; /*0x10 */
3066 } MPI2_CONFIG_PAGE_SAS_PHY_3,
3067 *PTR_MPI2_CONFIG_PAGE_SAS_PHY_3,
3068 Mpi2SasPhyPage3_t, *pMpi2SasPhyPage3_t;
3070 #define MPI2_SASPHY3_PAGEVERSION (0x00)
3075 typedef struct _MPI2_CONFIG_PAGE_SAS_PHY_4 {
3076 MPI2_CONFIG_EXTENDED_PAGE_HEADER
3079 Reserved1; /*0x08 */
3081 Reserved2; /*0x0A */
3085 InitialFrame[28]; /*0x0C */
3086 } MPI2_CONFIG_PAGE_SAS_PHY_4,
3087 *PTR_MPI2_CONFIG_PAGE_SAS_PHY_4,
3088 Mpi2SasPhyPage4_t, *pMpi2SasPhyPage4_t;
3090 #define MPI2_SASPHY4_PAGEVERSION (0x00)
3092 /*values for the Flags field */
3093 #define MPI2_SASPHY4_FLAGS_FRAME_VALID (0x02)
3094 #define MPI2_SASPHY4_FLAGS_SATA_FRAME (0x01)
3099 /****************************************************************************
3100 * SAS Port Config Pages
3101 ****************************************************************************/
3103 /*SAS Port Page 0 */
3105 typedef struct _MPI2_CONFIG_PAGE_SAS_PORT_0 {
3106 MPI2_CONFIG_EXTENDED_PAGE_HEADER
3109 PortNumber; /*0x08 */
3111 PhysicalPort; /*0x09 */
3113 PortWidth; /*0x0A */
3115 PhysicalPortWidth; /*0x0B */
3117 ZoneGroup; /*0x0C */
3119 Reserved1; /*0x0D */
3121 Reserved2; /*0x0E */
3123 SASAddress; /*0x10 */
3125 DeviceInfo; /*0x18 */
3127 Reserved3; /*0x1C */
3129 Reserved4; /*0x20 */
3130 } MPI2_CONFIG_PAGE_SAS_PORT_0,
3131 *PTR_MPI2_CONFIG_PAGE_SAS_PORT_0,
3132 Mpi2SasPortPage0_t, *pMpi2SasPortPage0_t;
3134 #define MPI2_SASPORT0_PAGEVERSION (0x00)
3136 /*see mpi2_sas.h for values for SAS Port Page 0 DeviceInfo values */
3139 /****************************************************************************
3140 * SAS Enclosure Config Pages
3141 ****************************************************************************/
3143 /*SAS Enclosure Page 0 */
3145 typedef struct _MPI2_CONFIG_PAGE_SAS_ENCLOSURE_0 {
3146 MPI2_CONFIG_EXTENDED_PAGE_HEADER
3149 Reserved1; /*0x08 */
3151 EnclosureLogicalID; /*0x0C */
3155 EnclosureHandle; /*0x16 */
3159 StartSlot; /*0x1A */
3161 Reserved2; /*0x1C */
3163 EnclosureLevel; /*0x1D */
3165 SEPDevHandle; /*0x1E */
3167 Reserved3; /*0x20 */
3169 Reserved4; /*0x24 */
3170 } MPI2_CONFIG_PAGE_SAS_ENCLOSURE_0,
3171 *PTR_MPI2_CONFIG_PAGE_SAS_ENCLOSURE_0,
3172 Mpi2SasEnclosurePage0_t, *pMpi2SasEnclosurePage0_t;
3174 #define MPI2_SASENCLOSURE0_PAGEVERSION (0x04)
3176 /*values for SAS Enclosure Page 0 Flags field */
3177 #define MPI2_SAS_ENCLS0_FLAGS_ENCL_LEVEL_VALID (0x0010)
3178 #define MPI2_SAS_ENCLS0_FLAGS_MNG_MASK (0x000F)
3179 #define MPI2_SAS_ENCLS0_FLAGS_MNG_UNKNOWN (0x0000)
3180 #define MPI2_SAS_ENCLS0_FLAGS_MNG_IOC_SES (0x0001)
3181 #define MPI2_SAS_ENCLS0_FLAGS_MNG_IOC_SGPIO (0x0002)
3182 #define MPI2_SAS_ENCLS0_FLAGS_MNG_EXP_SGPIO (0x0003)
3183 #define MPI2_SAS_ENCLS0_FLAGS_MNG_SES_ENCLOSURE (0x0004)
3184 #define MPI2_SAS_ENCLS0_FLAGS_MNG_IOC_GPIO (0x0005)
3187 /****************************************************************************
3189 ****************************************************************************/
3194 *Host code (drivers, BIOS, utilities, etc.) should leave this define set to
3195 *one and check the value returned for NumLogEntries at runtime.
3197 #ifndef MPI2_LOG_0_NUM_LOG_ENTRIES
3198 #define MPI2_LOG_0_NUM_LOG_ENTRIES (1)
3201 #define MPI2_LOG_0_LOG_DATA_LENGTH (0x1C)
3203 typedef struct _MPI2_LOG_0_ENTRY {
3204 U64 TimeStamp; /*0x00 */
3205 U32 Reserved1; /*0x08 */
3206 U16 LogSequence; /*0x0C */
3207 U16 LogEntryQualifier; /*0x0E */
3210 U16 Reserved2; /*0x12 */
3212 LogData[MPI2_LOG_0_LOG_DATA_LENGTH];/*0x14 */
3213 } MPI2_LOG_0_ENTRY, *PTR_MPI2_LOG_0_ENTRY,
3214 Mpi2Log0Entry_t, *pMpi2Log0Entry_t;
3216 /*values for Log Page 0 LogEntry LogEntryQualifier field */
3217 #define MPI2_LOG_0_ENTRY_QUAL_ENTRY_UNUSED (0x0000)
3218 #define MPI2_LOG_0_ENTRY_QUAL_POWER_ON_RESET (0x0001)
3219 #define MPI2_LOG_0_ENTRY_QUAL_TIMESTAMP_UPDATE (0x0002)
3220 #define MPI2_LOG_0_ENTRY_QUAL_MIN_IMPLEMENT_SPEC (0x8000)
3221 #define MPI2_LOG_0_ENTRY_QUAL_MAX_IMPLEMENT_SPEC (0xFFFF)
3223 typedef struct _MPI2_CONFIG_PAGE_LOG_0 {
3224 MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /*0x00 */
3225 U32 Reserved1; /*0x08 */
3226 U32 Reserved2; /*0x0C */
3227 U16 NumLogEntries;/*0x10 */
3228 U16 Reserved3; /*0x12 */
3230 LogEntry[MPI2_LOG_0_NUM_LOG_ENTRIES]; /*0x14 */
3231 } MPI2_CONFIG_PAGE_LOG_0, *PTR_MPI2_CONFIG_PAGE_LOG_0,
3232 Mpi2LogPage0_t, *pMpi2LogPage0_t;
3234 #define MPI2_LOG_0_PAGEVERSION (0x02)
3237 /****************************************************************************
3239 ****************************************************************************/
3244 *Host code (drivers, BIOS, utilities, etc.) should leave this define set to
3245 *one and check the value returned for NumElements at runtime.
3247 #ifndef MPI2_RAIDCONFIG0_MAX_ELEMENTS
3248 #define MPI2_RAIDCONFIG0_MAX_ELEMENTS (1)
3251 typedef struct _MPI2_RAIDCONFIG0_CONFIG_ELEMENT {
3252 U16 ElementFlags; /*0x00 */
3253 U16 VolDevHandle; /*0x02 */
3254 U8 HotSparePool; /*0x04 */
3255 U8 PhysDiskNum; /*0x05 */
3256 U16 PhysDiskDevHandle; /*0x06 */
3257 } MPI2_RAIDCONFIG0_CONFIG_ELEMENT,
3258 *PTR_MPI2_RAIDCONFIG0_CONFIG_ELEMENT,
3259 Mpi2RaidConfig0ConfigElement_t,
3260 *pMpi2RaidConfig0ConfigElement_t;
3262 /*values for the ElementFlags field */
3263 #define MPI2_RAIDCONFIG0_EFLAGS_MASK_ELEMENT_TYPE (0x000F)
3264 #define MPI2_RAIDCONFIG0_EFLAGS_VOLUME_ELEMENT (0x0000)
3265 #define MPI2_RAIDCONFIG0_EFLAGS_VOL_PHYS_DISK_ELEMENT (0x0001)
3266 #define MPI2_RAIDCONFIG0_EFLAGS_HOT_SPARE_ELEMENT (0x0002)
3267 #define MPI2_RAIDCONFIG0_EFLAGS_OCE_ELEMENT (0x0003)
3270 typedef struct _MPI2_CONFIG_PAGE_RAID_CONFIGURATION_0 {
3271 MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /*0x00 */
3272 U8 NumHotSpares; /*0x08 */
3273 U8 NumPhysDisks; /*0x09 */
3274 U8 NumVolumes; /*0x0A */
3275 U8 ConfigNum; /*0x0B */
3276 U32 Flags; /*0x0C */
3277 U8 ConfigGUID[24]; /*0x10 */
3278 U32 Reserved1; /*0x28 */
3279 U8 NumElements; /*0x2C */
3280 U8 Reserved2; /*0x2D */
3281 U16 Reserved3; /*0x2E */
3282 MPI2_RAIDCONFIG0_CONFIG_ELEMENT
3283 ConfigElement[MPI2_RAIDCONFIG0_MAX_ELEMENTS]; /*0x30 */
3284 } MPI2_CONFIG_PAGE_RAID_CONFIGURATION_0,
3285 *PTR_MPI2_CONFIG_PAGE_RAID_CONFIGURATION_0,
3286 Mpi2RaidConfigurationPage0_t,
3287 *pMpi2RaidConfigurationPage0_t;
3289 #define MPI2_RAIDCONFIG0_PAGEVERSION (0x00)
3291 /*values for RAID Configuration Page 0 Flags field */
3292 #define MPI2_RAIDCONFIG0_FLAG_FOREIGN_CONFIG (0x00000001)
3295 /****************************************************************************
3296 * Driver Persistent Mapping Config Pages
3297 ****************************************************************************/
3299 /*Driver Persistent Mapping Page 0 */
3301 typedef struct _MPI2_CONFIG_PAGE_DRIVER_MAP0_ENTRY {
3302 U64 PhysicalIdentifier; /*0x00 */
3303 U16 MappingInformation; /*0x08 */
3304 U16 DeviceIndex; /*0x0A */
3305 U32 PhysicalBitsMapping; /*0x0C */
3306 U32 Reserved1; /*0x10 */
3307 } MPI2_CONFIG_PAGE_DRIVER_MAP0_ENTRY,
3308 *PTR_MPI2_CONFIG_PAGE_DRIVER_MAP0_ENTRY,
3309 Mpi2DriverMap0Entry_t, *pMpi2DriverMap0Entry_t;
3311 typedef struct _MPI2_CONFIG_PAGE_DRIVER_MAPPING_0 {
3312 MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /*0x00 */
3313 MPI2_CONFIG_PAGE_DRIVER_MAP0_ENTRY Entry; /*0x08 */
3314 } MPI2_CONFIG_PAGE_DRIVER_MAPPING_0,
3315 *PTR_MPI2_CONFIG_PAGE_DRIVER_MAPPING_0,
3316 Mpi2DriverMappingPage0_t, *pMpi2DriverMappingPage0_t;
3318 #define MPI2_DRIVERMAPPING0_PAGEVERSION (0x00)
3320 /*values for Driver Persistent Mapping Page 0 MappingInformation field */
3321 #define MPI2_DRVMAP0_MAPINFO_SLOT_MASK (0x07F0)
3322 #define MPI2_DRVMAP0_MAPINFO_SLOT_SHIFT (4)
3323 #define MPI2_DRVMAP0_MAPINFO_MISSING_MASK (0x000F)
3326 /****************************************************************************
3327 * Ethernet Config Pages
3328 ****************************************************************************/
3330 /*Ethernet Page 0 */
3332 /*IP address (union of IPv4 and IPv6) */
3333 typedef union _MPI2_ETHERNET_IP_ADDR {
3336 } MPI2_ETHERNET_IP_ADDR, *PTR_MPI2_ETHERNET_IP_ADDR,
3337 Mpi2EthernetIpAddr_t, *pMpi2EthernetIpAddr_t;
3339 #define MPI2_ETHERNET_HOST_NAME_LENGTH (32)
3341 typedef struct _MPI2_CONFIG_PAGE_ETHERNET_0 {
3342 MPI2_CONFIG_EXTENDED_PAGE_HEADER Header; /*0x00 */
3343 U8 NumInterfaces; /*0x08 */
3344 U8 Reserved0; /*0x09 */
3345 U16 Reserved1; /*0x0A */
3346 U32 Status; /*0x0C */
3347 U8 MediaState; /*0x10 */
3348 U8 Reserved2; /*0x11 */
3349 U16 Reserved3; /*0x12 */
3350 U8 MacAddress[6]; /*0x14 */
3351 U8 Reserved4; /*0x1A */
3352 U8 Reserved5; /*0x1B */
3353 MPI2_ETHERNET_IP_ADDR IpAddress; /*0x1C */
3354 MPI2_ETHERNET_IP_ADDR SubnetMask; /*0x2C */
3355 MPI2_ETHERNET_IP_ADDR GatewayIpAddress;/*0x3C */
3356 MPI2_ETHERNET_IP_ADDR DNS1IpAddress; /*0x4C */
3357 MPI2_ETHERNET_IP_ADDR DNS2IpAddress; /*0x5C */
3358 MPI2_ETHERNET_IP_ADDR DhcpIpAddress; /*0x6C */
3360 HostName[MPI2_ETHERNET_HOST_NAME_LENGTH];/*0x7C */
3361 } MPI2_CONFIG_PAGE_ETHERNET_0,
3362 *PTR_MPI2_CONFIG_PAGE_ETHERNET_0,
3363 Mpi2EthernetPage0_t, *pMpi2EthernetPage0_t;
3365 #define MPI2_ETHERNETPAGE0_PAGEVERSION (0x00)
3367 /*values for Ethernet Page 0 Status field */
3368 #define MPI2_ETHPG0_STATUS_IPV6_CAPABLE (0x80000000)
3369 #define MPI2_ETHPG0_STATUS_IPV4_CAPABLE (0x40000000)
3370 #define MPI2_ETHPG0_STATUS_CONSOLE_CONNECTED (0x20000000)
3371 #define MPI2_ETHPG0_STATUS_DEFAULT_IF (0x00000100)
3372 #define MPI2_ETHPG0_STATUS_FW_DWNLD_ENABLED (0x00000080)
3373 #define MPI2_ETHPG0_STATUS_TELNET_ENABLED (0x00000040)
3374 #define MPI2_ETHPG0_STATUS_SSH2_ENABLED (0x00000020)
3375 #define MPI2_ETHPG0_STATUS_DHCP_CLIENT_ENABLED (0x00000010)
3376 #define MPI2_ETHPG0_STATUS_IPV6_ENABLED (0x00000008)
3377 #define MPI2_ETHPG0_STATUS_IPV4_ENABLED (0x00000004)
3378 #define MPI2_ETHPG0_STATUS_IPV6_ADDRESSES (0x00000002)
3379 #define MPI2_ETHPG0_STATUS_ETH_IF_ENABLED (0x00000001)
3381 /*values for Ethernet Page 0 MediaState field */
3382 #define MPI2_ETHPG0_MS_DUPLEX_MASK (0x80)
3383 #define MPI2_ETHPG0_MS_HALF_DUPLEX (0x00)
3384 #define MPI2_ETHPG0_MS_FULL_DUPLEX (0x80)
3386 #define MPI2_ETHPG0_MS_CONNECT_SPEED_MASK (0x07)
3387 #define MPI2_ETHPG0_MS_NOT_CONNECTED (0x00)
3388 #define MPI2_ETHPG0_MS_10MBIT (0x01)
3389 #define MPI2_ETHPG0_MS_100MBIT (0x02)
3390 #define MPI2_ETHPG0_MS_1GBIT (0x03)
3393 /*Ethernet Page 1 */
3395 typedef struct _MPI2_CONFIG_PAGE_ETHERNET_1 {
3396 MPI2_CONFIG_EXTENDED_PAGE_HEADER
3399 Reserved0; /*0x08 */
3403 MediaState; /*0x10 */
3405 Reserved1; /*0x11 */
3407 Reserved2; /*0x12 */
3409 MacAddress[6]; /*0x14 */
3411 Reserved3; /*0x1A */
3413 Reserved4; /*0x1B */
3414 MPI2_ETHERNET_IP_ADDR
3415 StaticIpAddress; /*0x1C */
3416 MPI2_ETHERNET_IP_ADDR
3417 StaticSubnetMask; /*0x2C */
3418 MPI2_ETHERNET_IP_ADDR
3419 StaticGatewayIpAddress; /*0x3C */
3420 MPI2_ETHERNET_IP_ADDR
3421 StaticDNS1IpAddress; /*0x4C */
3422 MPI2_ETHERNET_IP_ADDR
3423 StaticDNS2IpAddress; /*0x5C */
3425 Reserved5; /*0x6C */
3427 Reserved6; /*0x70 */
3429 Reserved7; /*0x74 */
3431 Reserved8; /*0x78 */
3433 HostName[MPI2_ETHERNET_HOST_NAME_LENGTH];/*0x7C */
3434 } MPI2_CONFIG_PAGE_ETHERNET_1,
3435 *PTR_MPI2_CONFIG_PAGE_ETHERNET_1,
3436 Mpi2EthernetPage1_t, *pMpi2EthernetPage1_t;
3438 #define MPI2_ETHERNETPAGE1_PAGEVERSION (0x00)
3440 /*values for Ethernet Page 1 Flags field */
3441 #define MPI2_ETHPG1_FLAG_SET_DEFAULT_IF (0x00000100)
3442 #define MPI2_ETHPG1_FLAG_ENABLE_FW_DOWNLOAD (0x00000080)
3443 #define MPI2_ETHPG1_FLAG_ENABLE_TELNET (0x00000040)
3444 #define MPI2_ETHPG1_FLAG_ENABLE_SSH2 (0x00000020)
3445 #define MPI2_ETHPG1_FLAG_ENABLE_DHCP_CLIENT (0x00000010)
3446 #define MPI2_ETHPG1_FLAG_ENABLE_IPV6 (0x00000008)
3447 #define MPI2_ETHPG1_FLAG_ENABLE_IPV4 (0x00000004)
3448 #define MPI2_ETHPG1_FLAG_USE_IPV6_ADDRESSES (0x00000002)
3449 #define MPI2_ETHPG1_FLAG_ENABLE_ETH_IF (0x00000001)
3451 /*values for Ethernet Page 1 MediaState field */
3452 #define MPI2_ETHPG1_MS_DUPLEX_MASK (0x80)
3453 #define MPI2_ETHPG1_MS_HALF_DUPLEX (0x00)
3454 #define MPI2_ETHPG1_MS_FULL_DUPLEX (0x80)
3456 #define MPI2_ETHPG1_MS_DATA_RATE_MASK (0x07)
3457 #define MPI2_ETHPG1_MS_DATA_RATE_AUTO (0x00)
3458 #define MPI2_ETHPG1_MS_DATA_RATE_10MBIT (0x01)
3459 #define MPI2_ETHPG1_MS_DATA_RATE_100MBIT (0x02)
3460 #define MPI2_ETHPG1_MS_DATA_RATE_1GBIT (0x03)
3463 /****************************************************************************
3464 * Extended Manufacturing Config Pages
3465 ****************************************************************************/
3468 *Generic structure to use for product-specific extended manufacturing pages
3469 *(currently Extended Manufacturing Page 40 through Extended Manufacturing
3473 typedef struct _MPI2_CONFIG_PAGE_EXT_MAN_PS {
3474 MPI2_CONFIG_EXTENDED_PAGE_HEADER
3477 ProductSpecificInfo; /*0x08 */
3478 } MPI2_CONFIG_PAGE_EXT_MAN_PS,
3479 *PTR_MPI2_CONFIG_PAGE_EXT_MAN_PS,
3480 Mpi2ExtManufacturingPagePS_t,
3481 *pMpi2ExtManufacturingPagePS_t;
3483 /*PageVersion should be provided by product-specific code */
projects / linux.git / blob