drivers/input/misc/gp2ap002a00f.c

   1 /*
   2  * Copyright (C) 2011 Sony Ericsson Mobile Communications Inc.
   3  *
   4  * Author: Courtney Cavin <[email protected]>
   5  * Prepared for up-stream by: Oskar Andero <[email protected]>
   6  *
   7  * This program is free software; you can redistribute it and/or modify
   8  * it under the terms of the GNU General Public License version 2, as
   9  * published by the Free Software Foundation.
  10  */
  11
  12 #include <linux/i2c.h>
  13 #include <linux/irq.h>
  14 #include <linux/slab.h>
  15 #include <linux/input.h>
  16 #include <linux/module.h>
  17 #include <linux/interrupt.h>
  18 #include <linux/gpio.h>
  19 #include <linux/delay.h>
  20 #include <linux/input/gp2ap002a00f.h>
  21
  22 struct gp2a_data {
  23         struct input_dev *input;
  24         const struct gp2a_platform_data *pdata;
  25         struct i2c_client *i2c_client;
  26 };
  27
  28 enum gp2a_addr {
  29         GP2A_ADDR_PROX  = 0x0,
  30         GP2A_ADDR_GAIN  = 0x1,
  31         GP2A_ADDR_HYS   = 0x2,
  32         GP2A_ADDR_CYCLE = 0x3,
  33         GP2A_ADDR_OPMOD = 0x4,
  34         GP2A_ADDR_CON   = 0x6
  35 };
  36
  37 enum gp2a_controls {
  38         /* Software Shutdown control: 0 = shutdown, 1 = normal operation */
  39         GP2A_CTRL_SSD   = 0x01
  40 };
  41
  42 static int gp2a_report(struct gp2a_data *dt)
  43 {
  44         int vo = gpio_get_value(dt->pdata->vout_gpio);
  45
  46         input_report_switch(dt->input, SW_FRONT_PROXIMITY, !vo);
  47         input_sync(dt->input);
  48
  49         return 0;
  50 }
  51
  52 static irqreturn_t gp2a_irq(int irq, void *handle)
  53 {
  54         struct gp2a_data *dt = handle;
  55
  56         gp2a_report(dt);
  57
  58         return IRQ_HANDLED;
  59 }
  60
  61 static int gp2a_enable(struct gp2a_data *dt)
  62 {
  63         return i2c_smbus_write_byte_data(dt->i2c_client, GP2A_ADDR_OPMOD,
  64                                          GP2A_CTRL_SSD);
  65 }
  66
  67 static int gp2a_disable(struct gp2a_data *dt)
  68 {
  69         return i2c_smbus_write_byte_data(dt->i2c_client, GP2A_ADDR_OPMOD,
  70                                          0x00);
  71 }
  72
  73 static int gp2a_device_open(struct input_dev *dev)
  74 {
  75         struct gp2a_data *dt = input_get_drvdata(dev);
  76         int error;
  77
  78         error = gp2a_enable(dt);
  79         if (error < 0) {
  80                 dev_err(&dt->i2c_client->dev,
  81                         "unable to activate, err %d\n", error);
  82                 return error;
  83         }
  84
  85         gp2a_report(dt);
  86
  87         return 0;
  88 }
  89
  90 static void gp2a_device_close(struct input_dev *dev)
  91 {
  92         struct gp2a_data *dt = input_get_drvdata(dev);
  93         int error;
  94
  95         error = gp2a_disable(dt);
  96         if (error < 0)
  97                 dev_err(&dt->i2c_client->dev,
  98                         "unable to deactivate, err %d\n", error);
  99 }
 100
 101 static int gp2a_initialize(struct gp2a_data *dt)
 102 {
 103         int error;
 104
 105         error = i2c_smbus_write_byte_data(dt->i2c_client, GP2A_ADDR_GAIN,
 106                                           0x08);
 107         if (error < 0)
 108                 return error;
 109
 110         error = i2c_smbus_write_byte_data(dt->i2c_client, GP2A_ADDR_HYS,
 111                                           0xc2);
 112         if (error < 0)
 113                 return error;
 114
 115         error = i2c_smbus_write_byte_data(dt->i2c_client, GP2A_ADDR_CYCLE,
 116                                           0x04);
 117         if (error < 0)
 118                 return error;
 119
 120         error = gp2a_disable(dt);
 121
 122         return error;
 123 }
 124
 125 static int gp2a_probe(struct i2c_client *client,
 126                                 const struct i2c_device_id *id)
 127 {
 128         const struct gp2a_platform_data *pdata = dev_get_platdata(&client->dev);
 129         struct gp2a_data *dt;
 130         int error;
 131
 132         if (!pdata)
 133                 return -EINVAL;
 134
 135         if (pdata->hw_setup) {
 136                 error = pdata->hw_setup(client);
 137                 if (error < 0)
 138                         return error;
 139         }
 140
 141         error = gpio_request_one(pdata->vout_gpio, GPIOF_IN, GP2A_I2C_NAME);
 142         if (error)
 143                 goto err_hw_shutdown;
 144
 145         dt = kzalloc(sizeof(struct gp2a_data), GFP_KERNEL);
 146         if (!dt) {
 147                 error = -ENOMEM;
 148                 goto err_free_gpio;
 149         }
 150
 151         dt->pdata = pdata;
 152         dt->i2c_client = client;
 153
 154         error = gp2a_initialize(dt);
 155         if (error < 0)
 156                 goto err_free_mem;
 157
 158         dt->input = input_allocate_device();
 159         if (!dt->input) {
 160                 error = -ENOMEM;
 161                 goto err_free_mem;
 162         }
 163
 164         input_set_drvdata(dt->input, dt);
 165
 166         dt->input->open = gp2a_device_open;
 167         dt->input->close = gp2a_device_close;
 168         dt->input->name = GP2A_I2C_NAME;
 169         dt->input->id.bustype = BUS_I2C;
 170         dt->input->dev.parent = &client->dev;
 171
 172         input_set_capability(dt->input, EV_SW, SW_FRONT_PROXIMITY);
 173
 174         error = request_threaded_irq(client->irq, NULL, gp2a_irq,
 175                         IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING |
 176                                 IRQF_ONESHOT,
 177                         GP2A_I2C_NAME, dt);
 178         if (error) {
 179                 dev_err(&client->dev, "irq request failed\n");
 180                 goto err_free_input_dev;
 181         }
 182
 183         error = input_register_device(dt->input);
 184         if (error) {
 185                 dev_err(&client->dev, "device registration failed\n");
 186                 goto err_free_irq;
 187         }
 188
 189         device_init_wakeup(&client->dev, pdata->wakeup);
 190         i2c_set_clientdata(client, dt);
 191
 192         return 0;
 193
 194 err_free_irq:
 195         free_irq(client->irq, dt);
 196 err_free_input_dev:
 197         input_free_device(dt->input);
 198 err_free_mem:
 199         kfree(dt);
 200 err_free_gpio:
 201         gpio_free(pdata->vout_gpio);
 202 err_hw_shutdown:
 203         if (pdata->hw_shutdown)
 204                 pdata->hw_shutdown(client);
 205         return error;
 206 }
 207
 208 static int gp2a_remove(struct i2c_client *client)
 209 {
 210         struct gp2a_data *dt = i2c_get_clientdata(client);
 211         const struct gp2a_platform_data *pdata = dt->pdata;
 212
 213         device_init_wakeup(&client->dev, false);
 214
 215         free_irq(client->irq, dt);
 216
 217         input_unregister_device(dt->input);
 218         kfree(dt);
 219
 220         gpio_free(pdata->vout_gpio);
 221
 222         if (pdata->hw_shutdown)
 223                 pdata->hw_shutdown(client);
 224
 225         return 0;
 226 }
 227
 228 static int __maybe_unused gp2a_suspend(struct device *dev)
 229 {
 230         struct i2c_client *client = to_i2c_client(dev);
 231         struct gp2a_data *dt = i2c_get_clientdata(client);
 232         int retval = 0;
 233
 234         if (device_may_wakeup(&client->dev)) {
 235                 enable_irq_wake(client->irq);
 236         } else {
 237                 mutex_lock(&dt->input->mutex);
 238                 if (dt->input->users)
 239                         retval = gp2a_disable(dt);
 240                 mutex_unlock(&dt->input->mutex);
 241         }
 242
 243         return retval;
 244 }
 245
 246 static int __maybe_unused gp2a_resume(struct device *dev)
 247 {
 248         struct i2c_client *client = to_i2c_client(dev);
 249         struct gp2a_data *dt = i2c_get_clientdata(client);
 250         int retval = 0;
 251
 252         if (device_may_wakeup(&client->dev)) {
 253                 disable_irq_wake(client->irq);
 254         } else {
 255                 mutex_lock(&dt->input->mutex);
 256                 if (dt->input->users)
 257                         retval = gp2a_enable(dt);
 258                 mutex_unlock(&dt->input->mutex);
 259         }
 260
 261         return retval;
 262 }
 263
 264 static SIMPLE_DEV_PM_OPS(gp2a_pm, gp2a_suspend, gp2a_resume);
 265
 266 static const struct i2c_device_id gp2a_i2c_id[] = {
 267         { GP2A_I2C_NAME, 0 },
 268         { }
 269 };
 270 MODULE_DEVICE_TABLE(i2c, gp2a_i2c_id);
 271
 272 static struct i2c_driver gp2a_i2c_driver = {
 273         .driver = {
 274                 .name   = GP2A_I2C_NAME,
 275                 .pm     = &gp2a_pm,
 276         },
 277         .probe          = gp2a_probe,
 278         .remove         = gp2a_remove,
 279         .id_table       = gp2a_i2c_id,
 280 };
 281
 282 module_i2c_driver(gp2a_i2c_driver);
 283
 284 MODULE_AUTHOR("Courtney Cavin <[email protected]>");
 285 MODULE_DESCRIPTION("Sharp GP2AP002A00F I2C Proximity/Opto sensor driver");
 286 MODULE_LICENSE("GPL v2");