]> Git Repo - linux.git/blob - drivers/gpu/drm/cirrus/cirrus_mode.c
xprtrdma: Prevent inline overflow
[linux.git] / drivers / gpu / drm / cirrus / cirrus_mode.c
1
2 /*
3  * Copyright 2012 Red Hat
4  *
5  * This file is subject to the terms and conditions of the GNU General
6  * Public License version 2. See the file COPYING in the main
7  * directory of this archive for more details.
8  *
9  * Authors: Matthew Garrett
10  *          Dave Airlie
11  *
12  * Portions of this code derived from cirrusfb.c:
13  * drivers/video/cirrusfb.c - driver for Cirrus Logic chipsets
14  *
15  * Copyright 1999-2001 Jeff Garzik <[email protected]>
16  */
17 #include <drm/drmP.h>
18 #include <drm/drm_crtc_helper.h>
19 #include <drm/drm_plane_helper.h>
20
21 #include <video/cirrus.h>
22
23 #include "cirrus_drv.h"
24
25 #define CIRRUS_LUT_SIZE 256
26
27 #define PALETTE_INDEX 0x8
28 #define PALETTE_DATA 0x9
29
30 /*
31  * This file contains setup code for the CRTC.
32  */
33
34 static void cirrus_crtc_load_lut(struct drm_crtc *crtc)
35 {
36         struct cirrus_crtc *cirrus_crtc = to_cirrus_crtc(crtc);
37         struct drm_device *dev = crtc->dev;
38         struct cirrus_device *cdev = dev->dev_private;
39         int i;
40
41         if (!crtc->enabled)
42                 return;
43
44         for (i = 0; i < CIRRUS_LUT_SIZE; i++) {
45                 /* VGA registers */
46                 WREG8(PALETTE_INDEX, i);
47                 WREG8(PALETTE_DATA, cirrus_crtc->lut_r[i]);
48                 WREG8(PALETTE_DATA, cirrus_crtc->lut_g[i]);
49                 WREG8(PALETTE_DATA, cirrus_crtc->lut_b[i]);
50         }
51 }
52
53 /*
54  * The DRM core requires DPMS functions, but they make little sense in our
55  * case and so are just stubs
56  */
57
58 static void cirrus_crtc_dpms(struct drm_crtc *crtc, int mode)
59 {
60         struct drm_device *dev = crtc->dev;
61         struct cirrus_device *cdev = dev->dev_private;
62         u8 sr01, gr0e;
63
64         switch (mode) {
65         case DRM_MODE_DPMS_ON:
66                 sr01 = 0x00;
67                 gr0e = 0x00;
68                 break;
69         case DRM_MODE_DPMS_STANDBY:
70                 sr01 = 0x20;
71                 gr0e = 0x02;
72                 break;
73         case DRM_MODE_DPMS_SUSPEND:
74                 sr01 = 0x20;
75                 gr0e = 0x04;
76                 break;
77         case DRM_MODE_DPMS_OFF:
78                 sr01 = 0x20;
79                 gr0e = 0x06;
80                 break;
81         default:
82                 return;
83         }
84
85         WREG8(SEQ_INDEX, 0x1);
86         sr01 |= RREG8(SEQ_DATA) & ~0x20;
87         WREG_SEQ(0x1, sr01);
88
89         WREG8(GFX_INDEX, 0xe);
90         gr0e |= RREG8(GFX_DATA) & ~0x06;
91         WREG_GFX(0xe, gr0e);
92 }
93
94 static void cirrus_set_start_address(struct drm_crtc *crtc, unsigned offset)
95 {
96         struct cirrus_device *cdev = crtc->dev->dev_private;
97         u32 addr;
98         u8 tmp;
99
100         addr = offset >> 2;
101         WREG_CRT(0x0c, (u8)((addr >> 8) & 0xff));
102         WREG_CRT(0x0d, (u8)(addr & 0xff));
103
104         WREG8(CRT_INDEX, 0x1b);
105         tmp = RREG8(CRT_DATA);
106         tmp &= 0xf2;
107         tmp |= (addr >> 16) & 0x01;
108         tmp |= (addr >> 15) & 0x0c;
109         WREG_CRT(0x1b, tmp);
110         WREG8(CRT_INDEX, 0x1d);
111         tmp = RREG8(CRT_DATA);
112         tmp &= 0x7f;
113         tmp |= (addr >> 12) & 0x80;
114         WREG_CRT(0x1d, tmp);
115 }
116
117 /* cirrus is different - we will force move buffers out of VRAM */
118 static int cirrus_crtc_do_set_base(struct drm_crtc *crtc,
119                                 struct drm_framebuffer *fb,
120                                 int x, int y, int atomic)
121 {
122         struct cirrus_device *cdev = crtc->dev->dev_private;
123         struct drm_gem_object *obj;
124         struct cirrus_framebuffer *cirrus_fb;
125         struct cirrus_bo *bo;
126         int ret;
127         u64 gpu_addr;
128
129         /* push the previous fb to system ram */
130         if (!atomic && fb) {
131                 cirrus_fb = to_cirrus_framebuffer(fb);
132                 obj = cirrus_fb->obj;
133                 bo = gem_to_cirrus_bo(obj);
134                 ret = cirrus_bo_reserve(bo, false);
135                 if (ret)
136                         return ret;
137                 cirrus_bo_push_sysram(bo);
138                 cirrus_bo_unreserve(bo);
139         }
140
141         cirrus_fb = to_cirrus_framebuffer(crtc->primary->fb);
142         obj = cirrus_fb->obj;
143         bo = gem_to_cirrus_bo(obj);
144
145         ret = cirrus_bo_reserve(bo, false);
146         if (ret)
147                 return ret;
148
149         ret = cirrus_bo_pin(bo, TTM_PL_FLAG_VRAM, &gpu_addr);
150         if (ret) {
151                 cirrus_bo_unreserve(bo);
152                 return ret;
153         }
154
155         if (&cdev->mode_info.gfbdev->gfb == cirrus_fb) {
156                 /* if pushing console in kmap it */
157                 ret = ttm_bo_kmap(&bo->bo, 0, bo->bo.num_pages, &bo->kmap);
158                 if (ret)
159                         DRM_ERROR("failed to kmap fbcon\n");
160         }
161         cirrus_bo_unreserve(bo);
162
163         cirrus_set_start_address(crtc, (u32)gpu_addr);
164         return 0;
165 }
166
167 static int cirrus_crtc_mode_set_base(struct drm_crtc *crtc, int x, int y,
168                              struct drm_framebuffer *old_fb)
169 {
170         return cirrus_crtc_do_set_base(crtc, old_fb, x, y, 0);
171 }
172
173 /*
174  * The meat of this driver. The core passes us a mode and we have to program
175  * it. The modesetting here is the bare minimum required to satisfy the qemu
176  * emulation of this hardware, and running this against a real device is
177  * likely to result in an inadequately programmed mode. We've already had
178  * the opportunity to modify the mode, so whatever we receive here should
179  * be something that can be correctly programmed and displayed
180  */
181 static int cirrus_crtc_mode_set(struct drm_crtc *crtc,
182                                 struct drm_display_mode *mode,
183                                 struct drm_display_mode *adjusted_mode,
184                                 int x, int y, struct drm_framebuffer *old_fb)
185 {
186         struct drm_device *dev = crtc->dev;
187         struct cirrus_device *cdev = dev->dev_private;
188         int hsyncstart, hsyncend, htotal, hdispend;
189         int vtotal, vdispend;
190         int tmp;
191         int sr07 = 0, hdr = 0;
192
193         htotal = mode->htotal / 8;
194         hsyncend = mode->hsync_end / 8;
195         hsyncstart = mode->hsync_start / 8;
196         hdispend = mode->hdisplay / 8;
197
198         vtotal = mode->vtotal;
199         vdispend = mode->vdisplay;
200
201         vdispend -= 1;
202         vtotal -= 2;
203
204         htotal -= 5;
205         hdispend -= 1;
206         hsyncstart += 1;
207         hsyncend += 1;
208
209         WREG_CRT(VGA_CRTC_V_SYNC_END, 0x20);
210         WREG_CRT(VGA_CRTC_H_TOTAL, htotal);
211         WREG_CRT(VGA_CRTC_H_DISP, hdispend);
212         WREG_CRT(VGA_CRTC_H_SYNC_START, hsyncstart);
213         WREG_CRT(VGA_CRTC_H_SYNC_END, hsyncend);
214         WREG_CRT(VGA_CRTC_V_TOTAL, vtotal & 0xff);
215         WREG_CRT(VGA_CRTC_V_DISP_END, vdispend & 0xff);
216
217         tmp = 0x40;
218         if ((vdispend + 1) & 512)
219                 tmp |= 0x20;
220         WREG_CRT(VGA_CRTC_MAX_SCAN, tmp);
221
222         /*
223          * Overflow bits for values that don't fit in the standard registers
224          */
225         tmp = 16;
226         if (vtotal & 256)
227                 tmp |= 1;
228         if (vdispend & 256)
229                 tmp |= 2;
230         if ((vdispend + 1) & 256)
231                 tmp |= 8;
232         if (vtotal & 512)
233                 tmp |= 32;
234         if (vdispend & 512)
235                 tmp |= 64;
236         WREG_CRT(VGA_CRTC_OVERFLOW, tmp);
237
238         tmp = 0;
239
240         /* More overflow bits */
241
242         if ((htotal + 5) & 64)
243                 tmp |= 16;
244         if ((htotal + 5) & 128)
245                 tmp |= 32;
246         if (vtotal & 256)
247                 tmp |= 64;
248         if (vtotal & 512)
249                 tmp |= 128;
250
251         WREG_CRT(CL_CRT1A, tmp);
252
253         /* Disable Hercules/CGA compatibility */
254         WREG_CRT(VGA_CRTC_MODE, 0x03);
255
256         WREG8(SEQ_INDEX, 0x7);
257         sr07 = RREG8(SEQ_DATA);
258         sr07 &= 0xe0;
259         hdr = 0;
260         switch (crtc->primary->fb->bits_per_pixel) {
261         case 8:
262                 sr07 |= 0x11;
263                 break;
264         case 16:
265                 sr07 |= 0x17;
266                 hdr = 0xc1;
267                 break;
268         case 24:
269                 sr07 |= 0x15;
270                 hdr = 0xc5;
271                 break;
272         case 32:
273                 sr07 |= 0x19;
274                 hdr = 0xc5;
275                 break;
276         default:
277                 return -1;
278         }
279
280         WREG_SEQ(0x7, sr07);
281
282         /* Program the pitch */
283         tmp = crtc->primary->fb->pitches[0] / 8;
284         WREG_CRT(VGA_CRTC_OFFSET, tmp);
285
286         /* Enable extended blanking and pitch bits, and enable full memory */
287         tmp = 0x22;
288         tmp |= (crtc->primary->fb->pitches[0] >> 7) & 0x10;
289         tmp |= (crtc->primary->fb->pitches[0] >> 6) & 0x40;
290         WREG_CRT(0x1b, tmp);
291
292         /* Enable high-colour modes */
293         WREG_GFX(VGA_GFX_MODE, 0x40);
294
295         /* And set graphics mode */
296         WREG_GFX(VGA_GFX_MISC, 0x01);
297
298         WREG_HDR(hdr);
299         cirrus_crtc_do_set_base(crtc, old_fb, x, y, 0);
300
301         /* Unblank (needed on S3 resume, vgabios doesn't do it then) */
302         outb(0x20, 0x3c0);
303         return 0;
304 }
305
306 /*
307  * This is called before a mode is programmed. A typical use might be to
308  * enable DPMS during the programming to avoid seeing intermediate stages,
309  * but that's not relevant to us
310  */
311 static void cirrus_crtc_prepare(struct drm_crtc *crtc)
312 {
313 }
314
315 /*
316  * This is called after a mode is programmed. It should reverse anything done
317  * by the prepare function
318  */
319 static void cirrus_crtc_commit(struct drm_crtc *crtc)
320 {
321 }
322
323 /*
324  * The core can pass us a set of gamma values to program. We actually only
325  * use this for 8-bit mode so can't perform smooth fades on deeper modes,
326  * but it's a requirement that we provide the function
327  */
328 static void cirrus_crtc_gamma_set(struct drm_crtc *crtc, u16 *red, u16 *green,
329                                   u16 *blue, uint32_t start, uint32_t size)
330 {
331         struct cirrus_crtc *cirrus_crtc = to_cirrus_crtc(crtc);
332         int i;
333
334         if (size != CIRRUS_LUT_SIZE)
335                 return;
336
337         for (i = 0; i < CIRRUS_LUT_SIZE; i++) {
338                 cirrus_crtc->lut_r[i] = red[i];
339                 cirrus_crtc->lut_g[i] = green[i];
340                 cirrus_crtc->lut_b[i] = blue[i];
341         }
342         cirrus_crtc_load_lut(crtc);
343 }
344
345 /* Simple cleanup function */
346 static void cirrus_crtc_destroy(struct drm_crtc *crtc)
347 {
348         struct cirrus_crtc *cirrus_crtc = to_cirrus_crtc(crtc);
349
350         drm_crtc_cleanup(crtc);
351         kfree(cirrus_crtc);
352 }
353
354 /* These provide the minimum set of functions required to handle a CRTC */
355 static const struct drm_crtc_funcs cirrus_crtc_funcs = {
356         .gamma_set = cirrus_crtc_gamma_set,
357         .set_config = drm_crtc_helper_set_config,
358         .destroy = cirrus_crtc_destroy,
359 };
360
361 static const struct drm_crtc_helper_funcs cirrus_helper_funcs = {
362         .dpms = cirrus_crtc_dpms,
363         .mode_set = cirrus_crtc_mode_set,
364         .mode_set_base = cirrus_crtc_mode_set_base,
365         .prepare = cirrus_crtc_prepare,
366         .commit = cirrus_crtc_commit,
367         .load_lut = cirrus_crtc_load_lut,
368 };
369
370 /* CRTC setup */
371 static void cirrus_crtc_init(struct drm_device *dev)
372 {
373         struct cirrus_device *cdev = dev->dev_private;
374         struct cirrus_crtc *cirrus_crtc;
375         int i;
376
377         cirrus_crtc = kzalloc(sizeof(struct cirrus_crtc) +
378                               (CIRRUSFB_CONN_LIMIT * sizeof(struct drm_connector *)),
379                               GFP_KERNEL);
380
381         if (cirrus_crtc == NULL)
382                 return;
383
384         drm_crtc_init(dev, &cirrus_crtc->base, &cirrus_crtc_funcs);
385
386         drm_mode_crtc_set_gamma_size(&cirrus_crtc->base, CIRRUS_LUT_SIZE);
387         cdev->mode_info.crtc = cirrus_crtc;
388
389         for (i = 0; i < CIRRUS_LUT_SIZE; i++) {
390                 cirrus_crtc->lut_r[i] = i;
391                 cirrus_crtc->lut_g[i] = i;
392                 cirrus_crtc->lut_b[i] = i;
393         }
394
395         drm_crtc_helper_add(&cirrus_crtc->base, &cirrus_helper_funcs);
396 }
397
398 /** Sets the color ramps on behalf of fbcon */
399 void cirrus_crtc_fb_gamma_set(struct drm_crtc *crtc, u16 red, u16 green,
400                               u16 blue, int regno)
401 {
402         struct cirrus_crtc *cirrus_crtc = to_cirrus_crtc(crtc);
403
404         cirrus_crtc->lut_r[regno] = red;
405         cirrus_crtc->lut_g[regno] = green;
406         cirrus_crtc->lut_b[regno] = blue;
407 }
408
409 /** Gets the color ramps on behalf of fbcon */
410 void cirrus_crtc_fb_gamma_get(struct drm_crtc *crtc, u16 *red, u16 *green,
411                               u16 *blue, int regno)
412 {
413         struct cirrus_crtc *cirrus_crtc = to_cirrus_crtc(crtc);
414
415         *red = cirrus_crtc->lut_r[regno];
416         *green = cirrus_crtc->lut_g[regno];
417         *blue = cirrus_crtc->lut_b[regno];
418 }
419
420 static void cirrus_encoder_mode_set(struct drm_encoder *encoder,
421                                 struct drm_display_mode *mode,
422                                 struct drm_display_mode *adjusted_mode)
423 {
424 }
425
426 static void cirrus_encoder_dpms(struct drm_encoder *encoder, int state)
427 {
428         return;
429 }
430
431 static void cirrus_encoder_prepare(struct drm_encoder *encoder)
432 {
433 }
434
435 static void cirrus_encoder_commit(struct drm_encoder *encoder)
436 {
437 }
438
439 static void cirrus_encoder_destroy(struct drm_encoder *encoder)
440 {
441         struct cirrus_encoder *cirrus_encoder = to_cirrus_encoder(encoder);
442         drm_encoder_cleanup(encoder);
443         kfree(cirrus_encoder);
444 }
445
446 static const struct drm_encoder_helper_funcs cirrus_encoder_helper_funcs = {
447         .dpms = cirrus_encoder_dpms,
448         .mode_set = cirrus_encoder_mode_set,
449         .prepare = cirrus_encoder_prepare,
450         .commit = cirrus_encoder_commit,
451 };
452
453 static const struct drm_encoder_funcs cirrus_encoder_encoder_funcs = {
454         .destroy = cirrus_encoder_destroy,
455 };
456
457 static struct drm_encoder *cirrus_encoder_init(struct drm_device *dev)
458 {
459         struct drm_encoder *encoder;
460         struct cirrus_encoder *cirrus_encoder;
461
462         cirrus_encoder = kzalloc(sizeof(struct cirrus_encoder), GFP_KERNEL);
463         if (!cirrus_encoder)
464                 return NULL;
465
466         encoder = &cirrus_encoder->base;
467         encoder->possible_crtcs = 0x1;
468
469         drm_encoder_init(dev, encoder, &cirrus_encoder_encoder_funcs,
470                          DRM_MODE_ENCODER_DAC, NULL);
471         drm_encoder_helper_add(encoder, &cirrus_encoder_helper_funcs);
472
473         return encoder;
474 }
475
476
477 static int cirrus_vga_get_modes(struct drm_connector *connector)
478 {
479         int count;
480
481         /* Just add a static list of modes */
482         if (cirrus_bpp <= 24) {
483                 count = drm_add_modes_noedid(connector, 1280, 1024);
484                 drm_set_preferred_mode(connector, 1024, 768);
485         } else {
486                 count = drm_add_modes_noedid(connector, 800, 600);
487                 drm_set_preferred_mode(connector, 800, 600);
488         }
489         return count;
490 }
491
492 static struct drm_encoder *cirrus_connector_best_encoder(struct drm_connector
493                                                   *connector)
494 {
495         int enc_id = connector->encoder_ids[0];
496         /* pick the encoder ids */
497         if (enc_id)
498                 return drm_encoder_find(connector->dev, enc_id);
499         return NULL;
500 }
501
502 static enum drm_connector_status cirrus_vga_detect(struct drm_connector
503                                                    *connector, bool force)
504 {
505         return connector_status_connected;
506 }
507
508 static void cirrus_connector_destroy(struct drm_connector *connector)
509 {
510         drm_connector_cleanup(connector);
511         kfree(connector);
512 }
513
514 static const struct drm_connector_helper_funcs cirrus_vga_connector_helper_funcs = {
515         .get_modes = cirrus_vga_get_modes,
516         .best_encoder = cirrus_connector_best_encoder,
517 };
518
519 static const struct drm_connector_funcs cirrus_vga_connector_funcs = {
520         .dpms = drm_helper_connector_dpms,
521         .detect = cirrus_vga_detect,
522         .fill_modes = drm_helper_probe_single_connector_modes,
523         .destroy = cirrus_connector_destroy,
524 };
525
526 static struct drm_connector *cirrus_vga_init(struct drm_device *dev)
527 {
528         struct drm_connector *connector;
529         struct cirrus_connector *cirrus_connector;
530
531         cirrus_connector = kzalloc(sizeof(struct cirrus_connector), GFP_KERNEL);
532         if (!cirrus_connector)
533                 return NULL;
534
535         connector = &cirrus_connector->base;
536
537         drm_connector_init(dev, connector,
538                            &cirrus_vga_connector_funcs, DRM_MODE_CONNECTOR_VGA);
539
540         drm_connector_helper_add(connector, &cirrus_vga_connector_helper_funcs);
541
542         drm_connector_register(connector);
543         return connector;
544 }
545
546
547 int cirrus_modeset_init(struct cirrus_device *cdev)
548 {
549         struct drm_encoder *encoder;
550         struct drm_connector *connector;
551         int ret;
552
553         drm_mode_config_init(cdev->dev);
554         cdev->mode_info.mode_config_initialized = true;
555
556         cdev->dev->mode_config.max_width = CIRRUS_MAX_FB_WIDTH;
557         cdev->dev->mode_config.max_height = CIRRUS_MAX_FB_HEIGHT;
558
559         cdev->dev->mode_config.fb_base = cdev->mc.vram_base;
560         cdev->dev->mode_config.preferred_depth = 24;
561         /* don't prefer a shadow on virt GPU */
562         cdev->dev->mode_config.prefer_shadow = 0;
563
564         cirrus_crtc_init(cdev->dev);
565
566         encoder = cirrus_encoder_init(cdev->dev);
567         if (!encoder) {
568                 DRM_ERROR("cirrus_encoder_init failed\n");
569                 return -1;
570         }
571
572         connector = cirrus_vga_init(cdev->dev);
573         if (!connector) {
574                 DRM_ERROR("cirrus_vga_init failed\n");
575                 return -1;
576         }
577
578         drm_mode_connector_attach_encoder(connector, encoder);
579
580         ret = cirrus_fbdev_init(cdev);
581         if (ret) {
582                 DRM_ERROR("cirrus_fbdev_init failed\n");
583                 return ret;
584         }
585
586         return 0;
587 }
588
589 void cirrus_modeset_fini(struct cirrus_device *cdev)
590 {
591         cirrus_fbdev_fini(cdev);
592
593         if (cdev->mode_info.mode_config_initialized) {
594                 drm_mode_config_cleanup(cdev->dev);
595                 cdev->mode_info.mode_config_initialized = false;
596         }
597 }
This page took 0.075152 seconds and 4 git commands to generate.