drivers/gpu/drm/i915/display/intel_crt.c

   1 /*
   2  * Copyright © 2006-2007 Intel Corporation
   3  *
   4  * Permission is hereby granted, free of charge, to any person obtaining a
   5  * copy of this software and associated documentation files (the "Software"),
   6  * to deal in the Software without restriction, including without limitation
   7  * the rights to use, copy, modify, merge, publish, distribute, sublicense,
   8  * and/or sell copies of the Software, and to permit persons to whom the
   9  * Software is furnished to do so, subject to the following conditions:
  10  *
  11  * The above copyright notice and this permission notice (including the next
  12  * paragraph) shall be included in all copies or substantial portions of the
  13  * Software.
  14  *
  15  * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
  16  * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
  17  * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
  18  * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
  19  * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
  20  * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
  21  * DEALINGS IN THE SOFTWARE.
  22  *
  23  * Authors:
  24  *      Eric Anholt <[email protected]>
  25  */
  26
  27 #include <linux/dmi.h>
  28 #include <linux/i2c.h>
  29 #include <linux/slab.h>
  30
  31 #include <drm/drm_atomic_helper.h>
  32 #include <drm/drm_crtc.h>
  33 #include <drm/drm_edid.h>
  34 #include <drm/drm_probe_helper.h>
  35
  36 #include "i915_drv.h"
  37 #include "i915_irq.h"
  38 #include "i915_reg.h"
  39 #include "intel_connector.h"
  40 #include "intel_crt.h"
  41 #include "intel_crtc.h"
  42 #include "intel_ddi.h"
  43 #include "intel_ddi_buf_trans.h"
  44 #include "intel_de.h"
  45 #include "intel_display_types.h"
  46 #include "intel_fdi.h"
  47 #include "intel_fdi_regs.h"
  48 #include "intel_fifo_underrun.h"
  49 #include "intel_gmbus.h"
  50 #include "intel_hotplug.h"
  51 #include "intel_hotplug_irq.h"
  52 #include "intel_load_detect.h"
  53 #include "intel_pch_display.h"
  54 #include "intel_pch_refclk.h"
  55
  56 /* Here's the desired hotplug mode */
  57 #define ADPA_HOTPLUG_BITS (ADPA_CRT_HOTPLUG_PERIOD_128 |                \
  58                            ADPA_CRT_HOTPLUG_WARMUP_10MS |               \
  59                            ADPA_CRT_HOTPLUG_SAMPLE_4S |                 \
  60                            ADPA_CRT_HOTPLUG_VOLTAGE_50 |                \
  61                            ADPA_CRT_HOTPLUG_VOLREF_325MV |              \
  62                            ADPA_CRT_HOTPLUG_ENABLE)
  63
  64 struct intel_crt {
  65         struct intel_encoder base;
  66         /* DPMS state is stored in the connector, which we need in the
  67          * encoder's enable/disable callbacks */
  68         struct intel_connector *connector;
  69         bool force_hotplug_required;
  70         i915_reg_t adpa_reg;
  71 };
  72
  73 static struct intel_crt *intel_encoder_to_crt(struct intel_encoder *encoder)
  74 {
  75         return container_of(encoder, struct intel_crt, base);
  76 }
  77
  78 static struct intel_crt *intel_attached_crt(struct intel_connector *connector)
  79 {
  80         return intel_encoder_to_crt(intel_attached_encoder(connector));
  81 }
  82
  83 bool intel_crt_port_enabled(struct drm_i915_private *dev_priv,
  84                             i915_reg_t adpa_reg, enum pipe *pipe)
  85 {
  86         u32 val;
  87
  88         val = intel_de_read(dev_priv, adpa_reg);
  89
  90         /* asserts want to know the pipe even if the port is disabled */
  91         if (HAS_PCH_CPT(dev_priv))
  92                 *pipe = (val & ADPA_PIPE_SEL_MASK_CPT) >> ADPA_PIPE_SEL_SHIFT_CPT;
  93         else
  94                 *pipe = (val & ADPA_PIPE_SEL_MASK) >> ADPA_PIPE_SEL_SHIFT;
  95
  96         return val & ADPA_DAC_ENABLE;
  97 }
  98
  99 static bool intel_crt_get_hw_state(struct intel_encoder *encoder,
 100                                    enum pipe *pipe)
 101 {
 102         struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
 103         struct intel_crt *crt = intel_encoder_to_crt(encoder);
 104         intel_wakeref_t wakeref;
 105         bool ret;
 106
 107         wakeref = intel_display_power_get_if_enabled(dev_priv,
 108                                                      encoder->power_domain);
 109         if (!wakeref)
 110                 return false;
 111
 112         ret = intel_crt_port_enabled(dev_priv, crt->adpa_reg, pipe);
 113
 114         intel_display_power_put(dev_priv, encoder->power_domain, wakeref);
 115
 116         return ret;
 117 }
 118
 119 static unsigned int intel_crt_get_flags(struct intel_encoder *encoder)
 120 {
 121         struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
 122         struct intel_crt *crt = intel_encoder_to_crt(encoder);
 123         u32 tmp, flags = 0;
 124
 125         tmp = intel_de_read(dev_priv, crt->adpa_reg);
 126
 127         if (tmp & ADPA_HSYNC_ACTIVE_HIGH)
 128                 flags |= DRM_MODE_FLAG_PHSYNC;
 129         else
 130                 flags |= DRM_MODE_FLAG_NHSYNC;
 131
 132         if (tmp & ADPA_VSYNC_ACTIVE_HIGH)
 133                 flags |= DRM_MODE_FLAG_PVSYNC;
 134         else
 135                 flags |= DRM_MODE_FLAG_NVSYNC;
 136
 137         return flags;
 138 }
 139
 140 static void intel_crt_get_config(struct intel_encoder *encoder,
 141                                  struct intel_crtc_state *pipe_config)
 142 {
 143         pipe_config->output_types |= BIT(INTEL_OUTPUT_ANALOG);
 144
 145         pipe_config->hw.adjusted_mode.flags |= intel_crt_get_flags(encoder);
 146
 147         pipe_config->hw.adjusted_mode.crtc_clock = pipe_config->port_clock;
 148 }
 149
 150 static void hsw_crt_get_config(struct intel_encoder *encoder,
 151                                struct intel_crtc_state *pipe_config)
 152 {
 153         lpt_pch_get_config(pipe_config);
 154
 155         hsw_ddi_get_config(encoder, pipe_config);
 156
 157         pipe_config->hw.adjusted_mode.flags &= ~(DRM_MODE_FLAG_PHSYNC |
 158                                               DRM_MODE_FLAG_NHSYNC |
 159                                               DRM_MODE_FLAG_PVSYNC |
 160                                               DRM_MODE_FLAG_NVSYNC);
 161         pipe_config->hw.adjusted_mode.flags |= intel_crt_get_flags(encoder);
 162 }
 163
 164 /* Note: The caller is required to filter out dpms modes not supported by the
 165  * platform. */
 166 static void intel_crt_set_dpms(struct intel_encoder *encoder,
 167                                const struct intel_crtc_state *crtc_state,
 168                                int mode)
 169 {
 170         struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
 171         struct intel_crt *crt = intel_encoder_to_crt(encoder);
 172         struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc);
 173         const struct drm_display_mode *adjusted_mode = &crtc_state->hw.adjusted_mode;
 174         u32 adpa;
 175
 176         if (DISPLAY_VER(dev_priv) >= 5)
 177                 adpa = ADPA_HOTPLUG_BITS;
 178         else
 179                 adpa = 0;
 180
 181         if (adjusted_mode->flags & DRM_MODE_FLAG_PHSYNC)
 182                 adpa |= ADPA_HSYNC_ACTIVE_HIGH;
 183         if (adjusted_mode->flags & DRM_MODE_FLAG_PVSYNC)
 184                 adpa |= ADPA_VSYNC_ACTIVE_HIGH;
 185
 186         /* For CPT allow 3 pipe config, for others just use A or B */
 187         if (HAS_PCH_LPT(dev_priv))
 188                 ; /* Those bits don't exist here */
 189         else if (HAS_PCH_CPT(dev_priv))
 190                 adpa |= ADPA_PIPE_SEL_CPT(crtc->pipe);
 191         else
 192                 adpa |= ADPA_PIPE_SEL(crtc->pipe);
 193
 194         if (!HAS_PCH_SPLIT(dev_priv))
 195                 intel_de_write(dev_priv, BCLRPAT(crtc->pipe), 0);
 196
 197         switch (mode) {
 198         case DRM_MODE_DPMS_ON:
 199                 adpa |= ADPA_DAC_ENABLE;
 200                 break;
 201         case DRM_MODE_DPMS_STANDBY:
 202                 adpa |= ADPA_DAC_ENABLE | ADPA_HSYNC_CNTL_DISABLE;
 203                 break;
 204         case DRM_MODE_DPMS_SUSPEND:
 205                 adpa |= ADPA_DAC_ENABLE | ADPA_VSYNC_CNTL_DISABLE;
 206                 break;
 207         case DRM_MODE_DPMS_OFF:
 208                 adpa |= ADPA_HSYNC_CNTL_DISABLE | ADPA_VSYNC_CNTL_DISABLE;
 209                 break;
 210         }
 211
 212         intel_de_write(dev_priv, crt->adpa_reg, adpa);
 213 }
 214
 215 static void intel_disable_crt(struct intel_atomic_state *state,
 216                               struct intel_encoder *encoder,
 217                               const struct intel_crtc_state *old_crtc_state,
 218                               const struct drm_connector_state *old_conn_state)
 219 {
 220         intel_crt_set_dpms(encoder, old_crtc_state, DRM_MODE_DPMS_OFF);
 221 }
 222
 223 static void pch_disable_crt(struct intel_atomic_state *state,
 224                             struct intel_encoder *encoder,
 225                             const struct intel_crtc_state *old_crtc_state,
 226                             const struct drm_connector_state *old_conn_state)
 227 {
 228 }
 229
 230 static void pch_post_disable_crt(struct intel_atomic_state *state,
 231                                  struct intel_encoder *encoder,
 232                                  const struct intel_crtc_state *old_crtc_state,
 233                                  const struct drm_connector_state *old_conn_state)
 234 {
 235         intel_disable_crt(state, encoder, old_crtc_state, old_conn_state);
 236 }
 237
 238 static void hsw_disable_crt(struct intel_atomic_state *state,
 239                             struct intel_encoder *encoder,
 240                             const struct intel_crtc_state *old_crtc_state,
 241                             const struct drm_connector_state *old_conn_state)
 242 {
 243         struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
 244
 245         drm_WARN_ON(&dev_priv->drm, !old_crtc_state->has_pch_encoder);
 246
 247         intel_set_pch_fifo_underrun_reporting(dev_priv, PIPE_A, false);
 248 }
 249
 250 static void hsw_post_disable_crt(struct intel_atomic_state *state,
 251                                  struct intel_encoder *encoder,
 252                                  const struct intel_crtc_state *old_crtc_state,
 253                                  const struct drm_connector_state *old_conn_state)
 254 {
 255         struct intel_crtc *crtc = to_intel_crtc(old_crtc_state->uapi.crtc);
 256         struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
 257
 258         intel_crtc_vblank_off(old_crtc_state);
 259
 260         intel_disable_transcoder(old_crtc_state);
 261
 262         intel_ddi_disable_transcoder_func(old_crtc_state);
 263
 264         ilk_pfit_disable(old_crtc_state);
 265
 266         intel_ddi_disable_transcoder_clock(old_crtc_state);
 267
 268         pch_post_disable_crt(state, encoder, old_crtc_state, old_conn_state);
 269
 270         lpt_pch_disable(state, crtc);
 271
 272         hsw_fdi_disable(encoder);
 273
 274         drm_WARN_ON(&dev_priv->drm, !old_crtc_state->has_pch_encoder);
 275
 276         intel_set_pch_fifo_underrun_reporting(dev_priv, PIPE_A, true);
 277 }
 278
 279 static void hsw_pre_pll_enable_crt(struct intel_atomic_state *state,
 280                                    struct intel_encoder *encoder,
 281                                    const struct intel_crtc_state *crtc_state,
 282                                    const struct drm_connector_state *conn_state)
 283 {
 284         struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
 285
 286         drm_WARN_ON(&dev_priv->drm, !crtc_state->has_pch_encoder);
 287
 288         intel_set_pch_fifo_underrun_reporting(dev_priv, PIPE_A, false);
 289 }
 290
 291 static void hsw_pre_enable_crt(struct intel_atomic_state *state,
 292                                struct intel_encoder *encoder,
 293                                const struct intel_crtc_state *crtc_state,
 294                                const struct drm_connector_state *conn_state)
 295 {
 296         struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
 297         struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc);
 298         enum pipe pipe = crtc->pipe;
 299
 300         drm_WARN_ON(&dev_priv->drm, !crtc_state->has_pch_encoder);
 301
 302         intel_set_cpu_fifo_underrun_reporting(dev_priv, pipe, false);
 303
 304         hsw_fdi_link_train(encoder, crtc_state);
 305
 306         intel_ddi_enable_transcoder_clock(encoder, crtc_state);
 307 }
 308
 309 static void hsw_enable_crt(struct intel_atomic_state *state,
 310                            struct intel_encoder *encoder,
 311                            const struct intel_crtc_state *crtc_state,
 312                            const struct drm_connector_state *conn_state)
 313 {
 314         struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
 315         struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc);
 316         enum pipe pipe = crtc->pipe;
 317
 318         drm_WARN_ON(&dev_priv->drm, !crtc_state->has_pch_encoder);
 319
 320         intel_ddi_enable_transcoder_func(encoder, crtc_state);
 321
 322         intel_enable_transcoder(crtc_state);
 323
 324         lpt_pch_enable(state, crtc);
 325
 326         intel_crtc_vblank_on(crtc_state);
 327
 328         intel_crt_set_dpms(encoder, crtc_state, DRM_MODE_DPMS_ON);
 329
 330         intel_crtc_wait_for_next_vblank(crtc);
 331         intel_crtc_wait_for_next_vblank(crtc);
 332         intel_set_cpu_fifo_underrun_reporting(dev_priv, pipe, true);
 333         intel_set_pch_fifo_underrun_reporting(dev_priv, PIPE_A, true);
 334 }
 335
 336 static void intel_enable_crt(struct intel_atomic_state *state,
 337                              struct intel_encoder *encoder,
 338                              const struct intel_crtc_state *crtc_state,
 339                              const struct drm_connector_state *conn_state)
 340 {
 341         intel_crt_set_dpms(encoder, crtc_state, DRM_MODE_DPMS_ON);
 342 }
 343
 344 static enum drm_mode_status
 345 intel_crt_mode_valid(struct drm_connector *connector,
 346                      struct drm_display_mode *mode)
 347 {
 348         struct drm_device *dev = connector->dev;
 349         struct drm_i915_private *dev_priv = to_i915(dev);
 350         int max_dotclk = dev_priv->max_dotclk_freq;
 351         int max_clock;
 352
 353         if (mode->flags & DRM_MODE_FLAG_DBLSCAN)
 354                 return MODE_NO_DBLESCAN;
 355
 356         if (mode->clock < 25000)
 357                 return MODE_CLOCK_LOW;
 358
 359         if (HAS_PCH_LPT(dev_priv))
 360                 max_clock = 180000;
 361         else if (IS_VALLEYVIEW(dev_priv))
 362                 /*
 363                  * 270 MHz due to current DPLL limits,
 364                  * DAC limit supposedly 355 MHz.
 365                  */
 366                 max_clock = 270000;
 367         else if (IS_DISPLAY_VER(dev_priv, 3, 4))
 368                 max_clock = 400000;
 369         else
 370                 max_clock = 350000;
 371         if (mode->clock > max_clock)
 372                 return MODE_CLOCK_HIGH;
 373
 374         if (mode->clock > max_dotclk)
 375                 return MODE_CLOCK_HIGH;
 376
 377         /* The FDI receiver on LPT only supports 8bpc and only has 2 lanes. */
 378         if (HAS_PCH_LPT(dev_priv) &&
 379             ilk_get_lanes_required(mode->clock, 270000, 24) > 2)
 380                 return MODE_CLOCK_HIGH;
 381
 382         /* HSW/BDW FDI limited to 4k */
 383         if (mode->hdisplay > 4096)
 384                 return MODE_H_ILLEGAL;
 385
 386         return MODE_OK;
 387 }
 388
 389 static int intel_crt_compute_config(struct intel_encoder *encoder,
 390                                     struct intel_crtc_state *pipe_config,
 391                                     struct drm_connector_state *conn_state)
 392 {
 393         struct drm_display_mode *adjusted_mode =
 394                 &pipe_config->hw.adjusted_mode;
 395
 396         if (adjusted_mode->flags & DRM_MODE_FLAG_DBLSCAN)
 397                 return -EINVAL;
 398
 399         pipe_config->sink_format = INTEL_OUTPUT_FORMAT_RGB;
 400         pipe_config->output_format = INTEL_OUTPUT_FORMAT_RGB;
 401
 402         return 0;
 403 }
 404
 405 static int pch_crt_compute_config(struct intel_encoder *encoder,
 406                                   struct intel_crtc_state *pipe_config,
 407                                   struct drm_connector_state *conn_state)
 408 {
 409         struct drm_display_mode *adjusted_mode =
 410                 &pipe_config->hw.adjusted_mode;
 411
 412         if (adjusted_mode->flags & DRM_MODE_FLAG_DBLSCAN)
 413                 return -EINVAL;
 414
 415         pipe_config->has_pch_encoder = true;
 416         if (!intel_fdi_compute_pipe_bpp(pipe_config))
 417                 return -EINVAL;
 418
 419         pipe_config->output_format = INTEL_OUTPUT_FORMAT_RGB;
 420
 421         return 0;
 422 }
 423
 424 static int hsw_crt_compute_config(struct intel_encoder *encoder,
 425                                   struct intel_crtc_state *pipe_config,
 426                                   struct drm_connector_state *conn_state)
 427 {
 428         struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
 429         struct drm_display_mode *adjusted_mode =
 430                 &pipe_config->hw.adjusted_mode;
 431
 432         if (adjusted_mode->flags & DRM_MODE_FLAG_DBLSCAN)
 433                 return -EINVAL;
 434
 435         /* HSW/BDW FDI limited to 4k */
 436         if (adjusted_mode->crtc_hdisplay > 4096 ||
 437             adjusted_mode->crtc_hblank_start > 4096)
 438                 return -EINVAL;
 439
 440         pipe_config->has_pch_encoder = true;
 441         if (!intel_fdi_compute_pipe_bpp(pipe_config))
 442                 return -EINVAL;
 443
 444         pipe_config->output_format = INTEL_OUTPUT_FORMAT_RGB;
 445
 446         /* LPT FDI RX only supports 8bpc. */
 447         if (HAS_PCH_LPT(dev_priv)) {
 448                 /* TODO: Check crtc_state->max_link_bpp_x16 instead of bw_constrained */
 449                 if (pipe_config->bw_constrained && pipe_config->pipe_bpp < 24) {
 450                         drm_dbg_kms(&dev_priv->drm,
 451                                     "LPT only supports 24bpp\n");
 452                         return -EINVAL;
 453                 }
 454
 455                 pipe_config->pipe_bpp = 24;
 456         }
 457
 458         /* FDI must always be 2.7 GHz */
 459         pipe_config->port_clock = 135000 * 2;
 460
 461         pipe_config->enhanced_framing = true;
 462
 463         adjusted_mode->crtc_clock = lpt_iclkip(pipe_config);
 464
 465         return 0;
 466 }
 467
 468 static bool ilk_crt_detect_hotplug(struct drm_connector *connector)
 469 {
 470         struct drm_device *dev = connector->dev;
 471         struct intel_crt *crt = intel_attached_crt(to_intel_connector(connector));
 472         struct drm_i915_private *dev_priv = to_i915(dev);
 473         u32 adpa;
 474         bool ret;
 475
 476         /* The first time through, trigger an explicit detection cycle */
 477         if (crt->force_hotplug_required) {
 478                 bool turn_off_dac = HAS_PCH_SPLIT(dev_priv);
 479                 u32 save_adpa;
 480
 481                 crt->force_hotplug_required = false;
 482
 483                 save_adpa = adpa = intel_de_read(dev_priv, crt->adpa_reg);
 484                 drm_dbg_kms(&dev_priv->drm,
 485                             "trigger hotplug detect cycle: adpa=0x%x\n", adpa);
 486
 487                 adpa |= ADPA_CRT_HOTPLUG_FORCE_TRIGGER;
 488                 if (turn_off_dac)
 489                         adpa &= ~ADPA_DAC_ENABLE;
 490
 491                 intel_de_write(dev_priv, crt->adpa_reg, adpa);
 492
 493                 if (intel_de_wait_for_clear(dev_priv,
 494                                             crt->adpa_reg,
 495                                             ADPA_CRT_HOTPLUG_FORCE_TRIGGER,
 496                                             1000))
 497                         drm_dbg_kms(&dev_priv->drm,
 498                                     "timed out waiting for FORCE_TRIGGER");
 499
 500                 if (turn_off_dac) {
 501                         intel_de_write(dev_priv, crt->adpa_reg, save_adpa);
 502                         intel_de_posting_read(dev_priv, crt->adpa_reg);
 503                 }
 504         }
 505
 506         /* Check the status to see if both blue and green are on now */
 507         adpa = intel_de_read(dev_priv, crt->adpa_reg);
 508         if ((adpa & ADPA_CRT_HOTPLUG_MONITOR_MASK) != 0)
 509                 ret = true;
 510         else
 511                 ret = false;
 512         drm_dbg_kms(&dev_priv->drm, "ironlake hotplug adpa=0x%x, result %d\n",
 513                     adpa, ret);
 514
 515         return ret;
 516 }
 517
 518 static bool valleyview_crt_detect_hotplug(struct drm_connector *connector)
 519 {
 520         struct drm_device *dev = connector->dev;
 521         struct intel_crt *crt = intel_attached_crt(to_intel_connector(connector));
 522         struct drm_i915_private *dev_priv = to_i915(dev);
 523         bool reenable_hpd;
 524         u32 adpa;
 525         bool ret;
 526         u32 save_adpa;
 527
 528         /*
 529          * Doing a force trigger causes a hpd interrupt to get sent, which can
 530          * get us stuck in a loop if we're polling:
 531          *  - We enable power wells and reset the ADPA
 532          *  - output_poll_exec does force probe on VGA, triggering a hpd
 533          *  - HPD handler waits for poll to unlock dev->mode_config.mutex
 534          *  - output_poll_exec shuts off the ADPA, unlocks
 535          *    dev->mode_config.mutex
 536          *  - HPD handler runs, resets ADPA and brings us back to the start
 537          *
 538          * Just disable HPD interrupts here to prevent this
 539          */
 540         reenable_hpd = intel_hpd_disable(dev_priv, crt->base.hpd_pin);
 541
 542         save_adpa = adpa = intel_de_read(dev_priv, crt->adpa_reg);
 543         drm_dbg_kms(&dev_priv->drm,
 544                     "trigger hotplug detect cycle: adpa=0x%x\n", adpa);
 545
 546         adpa |= ADPA_CRT_HOTPLUG_FORCE_TRIGGER;
 547
 548         intel_de_write(dev_priv, crt->adpa_reg, adpa);
 549
 550         if (intel_de_wait_for_clear(dev_priv, crt->adpa_reg,
 551                                     ADPA_CRT_HOTPLUG_FORCE_TRIGGER, 1000)) {
 552                 drm_dbg_kms(&dev_priv->drm,
 553                             "timed out waiting for FORCE_TRIGGER");
 554                 intel_de_write(dev_priv, crt->adpa_reg, save_adpa);
 555         }
 556
 557         /* Check the status to see if both blue and green are on now */
 558         adpa = intel_de_read(dev_priv, crt->adpa_reg);
 559         if ((adpa & ADPA_CRT_HOTPLUG_MONITOR_MASK) != 0)
 560                 ret = true;
 561         else
 562                 ret = false;
 563
 564         drm_dbg_kms(&dev_priv->drm,
 565                     "valleyview hotplug adpa=0x%x, result %d\n", adpa, ret);
 566
 567         if (reenable_hpd)
 568                 intel_hpd_enable(dev_priv, crt->base.hpd_pin);
 569
 570         return ret;
 571 }
 572
 573 static bool intel_crt_detect_hotplug(struct drm_connector *connector)
 574 {
 575         struct drm_device *dev = connector->dev;
 576         struct drm_i915_private *dev_priv = to_i915(dev);
 577         u32 stat;
 578         bool ret = false;
 579         int i, tries = 0;
 580
 581         if (HAS_PCH_SPLIT(dev_priv))
 582                 return ilk_crt_detect_hotplug(connector);
 583
 584         if (IS_VALLEYVIEW(dev_priv))
 585                 return valleyview_crt_detect_hotplug(connector);
 586
 587         /*
 588          * On 4 series desktop, CRT detect sequence need to be done twice
 589          * to get a reliable result.
 590          */
 591
 592         if (IS_G45(dev_priv))
 593                 tries = 2;
 594         else
 595                 tries = 1;
 596
 597         for (i = 0; i < tries ; i++) {
 598                 /* turn on the FORCE_DETECT */
 599                 i915_hotplug_interrupt_update(dev_priv,
 600                                               CRT_HOTPLUG_FORCE_DETECT,
 601                                               CRT_HOTPLUG_FORCE_DETECT);
 602                 /* wait for FORCE_DETECT to go off */
 603                 if (intel_de_wait_for_clear(dev_priv, PORT_HOTPLUG_EN,
 604                                             CRT_HOTPLUG_FORCE_DETECT, 1000))
 605                         drm_dbg_kms(&dev_priv->drm,
 606                                     "timed out waiting for FORCE_DETECT to go off");
 607         }
 608
 609         stat = intel_de_read(dev_priv, PORT_HOTPLUG_STAT);
 610         if ((stat & CRT_HOTPLUG_MONITOR_MASK) != CRT_HOTPLUG_MONITOR_NONE)
 611                 ret = true;
 612
 613         /* clear the interrupt we just generated, if any */
 614         intel_de_write(dev_priv, PORT_HOTPLUG_STAT, CRT_HOTPLUG_INT_STATUS);
 615
 616         i915_hotplug_interrupt_update(dev_priv, CRT_HOTPLUG_FORCE_DETECT, 0);
 617
 618         return ret;
 619 }
 620
 621 static const struct drm_edid *intel_crt_get_edid(struct drm_connector *connector,
 622                                                  struct i2c_adapter *ddc)
 623 {
 624         const struct drm_edid *drm_edid;
 625
 626         drm_edid = drm_edid_read_ddc(connector, ddc);
 627
 628         if (!drm_edid && !intel_gmbus_is_forced_bit(ddc)) {
 629                 drm_dbg_kms(connector->dev,
 630                             "CRT GMBUS EDID read failed, retry using GPIO bit-banging\n");
 631                 intel_gmbus_force_bit(ddc, true);
 632                 drm_edid = drm_edid_read_ddc(connector, ddc);
 633                 intel_gmbus_force_bit(ddc, false);
 634         }
 635
 636         return drm_edid;
 637 }
 638
 639 /* local version of intel_ddc_get_modes() to use intel_crt_get_edid() */
 640 static int intel_crt_ddc_get_modes(struct drm_connector *connector,
 641                                    struct i2c_adapter *ddc)
 642 {
 643         const struct drm_edid *drm_edid;
 644         int ret;
 645
 646         drm_edid = intel_crt_get_edid(connector, ddc);
 647         if (!drm_edid)
 648                 return 0;
 649
 650         ret = intel_connector_update_modes(connector, drm_edid);
 651
 652         drm_edid_free(drm_edid);
 653
 654         return ret;
 655 }
 656
 657 static bool intel_crt_detect_ddc(struct drm_connector *connector)
 658 {
 659         struct intel_crt *crt = intel_attached_crt(to_intel_connector(connector));
 660         struct drm_i915_private *dev_priv = to_i915(crt->base.base.dev);
 661         const struct drm_edid *drm_edid;
 662         bool ret = false;
 663
 664         drm_edid = intel_crt_get_edid(connector, connector->ddc);
 665
 666         if (drm_edid) {
 667                 /*
 668                  * This may be a DVI-I connector with a shared DDC
 669                  * link between analog and digital outputs, so we
 670                  * have to check the EDID input spec of the attached device.
 671                  */
 672                 if (drm_edid_is_digital(drm_edid)) {
 673                         drm_dbg_kms(&dev_priv->drm,
 674                                     "CRT not detected via DDC:0x50 [EDID reports a digital panel]\n");
 675                 } else {
 676                         drm_dbg_kms(&dev_priv->drm,
 677                                     "CRT detected via DDC:0x50 [EDID]\n");
 678                         ret = true;
 679                 }
 680         } else {
 681                 drm_dbg_kms(&dev_priv->drm,
 682                             "CRT not detected via DDC:0x50 [no valid EDID found]\n");
 683         }
 684
 685         drm_edid_free(drm_edid);
 686
 687         return ret;
 688 }
 689
 690 static enum drm_connector_status
 691 intel_crt_load_detect(struct intel_crt *crt, enum pipe pipe)
 692 {
 693         struct drm_device *dev = crt->base.base.dev;
 694         struct drm_i915_private *dev_priv = to_i915(dev);
 695         enum transcoder cpu_transcoder = (enum transcoder)pipe;
 696         u32 save_bclrpat;
 697         u32 save_vtotal;
 698         u32 vtotal, vactive;
 699         u32 vsample;
 700         u32 vblank, vblank_start, vblank_end;
 701         u32 dsl;
 702         u8 st00;
 703         enum drm_connector_status status;
 704
 705         drm_dbg_kms(&dev_priv->drm, "starting load-detect on CRT\n");
 706
 707         save_bclrpat = intel_de_read(dev_priv, BCLRPAT(cpu_transcoder));
 708         save_vtotal = intel_de_read(dev_priv, TRANS_VTOTAL(cpu_transcoder));
 709         vblank = intel_de_read(dev_priv, TRANS_VBLANK(cpu_transcoder));
 710
 711         vtotal = REG_FIELD_GET(VTOTAL_MASK, save_vtotal) + 1;
 712         vactive = REG_FIELD_GET(VACTIVE_MASK, save_vtotal) + 1;
 713
 714         vblank_start = REG_FIELD_GET(VBLANK_START_MASK, vblank) + 1;
 715         vblank_end = REG_FIELD_GET(VBLANK_END_MASK, vblank) + 1;
 716
 717         /* Set the border color to purple. */
 718         intel_de_write(dev_priv, BCLRPAT(cpu_transcoder), 0x500050);
 719
 720         if (DISPLAY_VER(dev_priv) != 2) {
 721                 u32 transconf = intel_de_read(dev_priv, TRANSCONF(cpu_transcoder));
 722
 723                 intel_de_write(dev_priv, TRANSCONF(cpu_transcoder),
 724                                transconf | TRANSCONF_FORCE_BORDER);
 725                 intel_de_posting_read(dev_priv, TRANSCONF(cpu_transcoder));
 726                 /* Wait for next Vblank to substitue
 727                  * border color for Color info */
 728                 intel_crtc_wait_for_next_vblank(intel_crtc_for_pipe(dev_priv, pipe));
 729                 st00 = intel_de_read8(dev_priv, _VGA_MSR_WRITE);
 730                 status = ((st00 & (1 << 4)) != 0) ?
 731                         connector_status_connected :
 732                         connector_status_disconnected;
 733
 734                 intel_de_write(dev_priv, TRANSCONF(cpu_transcoder), transconf);
 735         } else {
 736                 bool restore_vblank = false;
 737                 int count, detect;
 738
 739                 /*
 740                 * If there isn't any border, add some.
 741                 * Yes, this will flicker
 742                 */
 743                 if (vblank_start <= vactive && vblank_end >= vtotal) {
 744                         u32 vsync = intel_de_read(dev_priv, TRANS_VSYNC(cpu_transcoder));
 745                         u32 vsync_start = REG_FIELD_GET(VSYNC_START_MASK, vsync) + 1;
 746
 747                         vblank_start = vsync_start;
 748                         intel_de_write(dev_priv, TRANS_VBLANK(cpu_transcoder),
 749                                        VBLANK_START(vblank_start - 1) |
 750                                        VBLANK_END(vblank_end - 1));
 751                         restore_vblank = true;
 752                 }
 753                 /* sample in the vertical border, selecting the larger one */
 754                 if (vblank_start - vactive >= vtotal - vblank_end)
 755                         vsample = (vblank_start + vactive) >> 1;
 756                 else
 757                         vsample = (vtotal + vblank_end) >> 1;
 758
 759                 /*
 760                  * Wait for the border to be displayed
 761                  */
 762                 while (intel_de_read(dev_priv, PIPEDSL(pipe)) >= vactive)
 763                         ;
 764                 while ((dsl = intel_de_read(dev_priv, PIPEDSL(pipe))) <= vsample)
 765                         ;
 766                 /*
 767                  * Watch ST00 for an entire scanline
 768                  */
 769                 detect = 0;
 770                 count = 0;
 771                 do {
 772                         count++;
 773                         /* Read the ST00 VGA status register */
 774                         st00 = intel_de_read8(dev_priv, _VGA_MSR_WRITE);
 775                         if (st00 & (1 << 4))
 776                                 detect++;
 777                 } while ((intel_de_read(dev_priv, PIPEDSL(pipe)) == dsl));
 778
 779                 /* restore vblank if necessary */
 780                 if (restore_vblank)
 781                         intel_de_write(dev_priv, TRANS_VBLANK(cpu_transcoder), vblank);
 782                 /*
 783                  * If more than 3/4 of the scanline detected a monitor,
 784                  * then it is assumed to be present. This works even on i830,
 785                  * where there isn't any way to force the border color across
 786                  * the screen
 787                  */
 788                 status = detect * 4 > count * 3 ?
 789                          connector_status_connected :
 790                          connector_status_disconnected;
 791         }
 792
 793         /* Restore previous settings */
 794         intel_de_write(dev_priv, BCLRPAT(cpu_transcoder), save_bclrpat);
 795
 796         return status;
 797 }
 798
 799 static int intel_spurious_crt_detect_dmi_callback(const struct dmi_system_id *id)
 800 {
 801         DRM_DEBUG_DRIVER("Skipping CRT detection for %s\n", id->ident);
 802         return 1;
 803 }
 804
 805 static const struct dmi_system_id intel_spurious_crt_detect[] = {
 806         {
 807                 .callback = intel_spurious_crt_detect_dmi_callback,
 808                 .ident = "ACER ZGB",
 809                 .matches = {
 810                         DMI_MATCH(DMI_SYS_VENDOR, "ACER"),
 811                         DMI_MATCH(DMI_PRODUCT_NAME, "ZGB"),
 812                 },
 813         },
 814         {
 815                 .callback = intel_spurious_crt_detect_dmi_callback,
 816                 .ident = "Intel DZ77BH-55K",
 817                 .matches = {
 818                         DMI_MATCH(DMI_BOARD_VENDOR, "Intel Corporation"),
 819                         DMI_MATCH(DMI_BOARD_NAME, "DZ77BH-55K"),
 820                 },
 821         },
 822         { }
 823 };
 824
 825 static int
 826 intel_crt_detect(struct drm_connector *connector,
 827                  struct drm_modeset_acquire_ctx *ctx,
 828                  bool force)
 829 {
 830         struct drm_i915_private *dev_priv = to_i915(connector->dev);
 831         struct intel_crt *crt = intel_attached_crt(to_intel_connector(connector));
 832         struct intel_encoder *intel_encoder = &crt->base;
 833         struct drm_atomic_state *state;
 834         intel_wakeref_t wakeref;
 835         int status;
 836
 837         drm_dbg_kms(&dev_priv->drm, "[CONNECTOR:%d:%s] force=%d\n",
 838                     connector->base.id, connector->name,
 839                     force);
 840
 841         if (!intel_display_device_enabled(dev_priv))
 842                 return connector_status_disconnected;
 843
 844         if (dev_priv->params.load_detect_test) {
 845                 wakeref = intel_display_power_get(dev_priv,
 846                                                   intel_encoder->power_domain);
 847                 goto load_detect;
 848         }
 849
 850         /* Skip machines without VGA that falsely report hotplug events */
 851         if (dmi_check_system(intel_spurious_crt_detect))
 852                 return connector_status_disconnected;
 853
 854         wakeref = intel_display_power_get(dev_priv,
 855                                           intel_encoder->power_domain);
 856
 857         if (I915_HAS_HOTPLUG(dev_priv)) {
 858                 /* We can not rely on the HPD pin always being correctly wired
 859                  * up, for example many KVM do not pass it through, and so
 860                  * only trust an assertion that the monitor is connected.
 861                  */
 862                 if (intel_crt_detect_hotplug(connector)) {
 863                         drm_dbg_kms(&dev_priv->drm,
 864                                     "CRT detected via hotplug\n");
 865                         status = connector_status_connected;
 866                         goto out;
 867                 } else
 868                         drm_dbg_kms(&dev_priv->drm,
 869                                     "CRT not detected via hotplug\n");
 870         }
 871
 872         if (intel_crt_detect_ddc(connector)) {
 873                 status = connector_status_connected;
 874                 goto out;
 875         }
 876
 877         /* Load detection is broken on HPD capable machines. Whoever wants a
 878          * broken monitor (without edid) to work behind a broken kvm (that fails
 879          * to have the right resistors for HP detection) needs to fix this up.
 880          * For now just bail out. */
 881         if (I915_HAS_HOTPLUG(dev_priv)) {
 882                 status = connector_status_disconnected;
 883                 goto out;
 884         }
 885
 886 load_detect:
 887         if (!force) {
 888                 status = connector->status;
 889                 goto out;
 890         }
 891
 892         /* for pre-945g platforms use load detect */
 893         state = intel_load_detect_get_pipe(connector, ctx);
 894         if (IS_ERR(state)) {
 895                 status = PTR_ERR(state);
 896         } else if (!state) {
 897                 status = connector_status_unknown;
 898         } else {
 899                 if (intel_crt_detect_ddc(connector))
 900                         status = connector_status_connected;
 901                 else if (DISPLAY_VER(dev_priv) < 4)
 902                         status = intel_crt_load_detect(crt,
 903                                 to_intel_crtc(connector->state->crtc)->pipe);
 904                 else if (dev_priv->params.load_detect_test)
 905                         status = connector_status_disconnected;
 906                 else
 907                         status = connector_status_unknown;
 908                 intel_load_detect_release_pipe(connector, state, ctx);
 909         }
 910
 911 out:
 912         intel_display_power_put(dev_priv, intel_encoder->power_domain, wakeref);
 913
 914         return status;
 915 }
 916
 917 static int intel_crt_get_modes(struct drm_connector *connector)
 918 {
 919         struct drm_device *dev = connector->dev;
 920         struct drm_i915_private *dev_priv = to_i915(dev);
 921         struct intel_crt *crt = intel_attached_crt(to_intel_connector(connector));
 922         struct intel_encoder *intel_encoder = &crt->base;
 923         intel_wakeref_t wakeref;
 924         struct i2c_adapter *ddc;
 925         int ret;
 926
 927         wakeref = intel_display_power_get(dev_priv,
 928                                           intel_encoder->power_domain);
 929
 930         ret = intel_crt_ddc_get_modes(connector, connector->ddc);
 931         if (ret || !IS_G4X(dev_priv))
 932                 goto out;
 933
 934         /* Try to probe digital port for output in DVI-I -> VGA mode. */
 935         ddc = intel_gmbus_get_adapter(dev_priv, GMBUS_PIN_DPB);
 936         ret = intel_crt_ddc_get_modes(connector, ddc);
 937
 938 out:
 939         intel_display_power_put(dev_priv, intel_encoder->power_domain, wakeref);
 940
 941         return ret;
 942 }
 943
 944 void intel_crt_reset(struct drm_encoder *encoder)
 945 {
 946         struct drm_i915_private *dev_priv = to_i915(encoder->dev);
 947         struct intel_crt *crt = intel_encoder_to_crt(to_intel_encoder(encoder));
 948
 949         if (DISPLAY_VER(dev_priv) >= 5) {
 950                 u32 adpa;
 951
 952                 adpa = intel_de_read(dev_priv, crt->adpa_reg);
 953                 adpa &= ~ADPA_CRT_HOTPLUG_MASK;
 954                 adpa |= ADPA_HOTPLUG_BITS;
 955                 intel_de_write(dev_priv, crt->adpa_reg, adpa);
 956                 intel_de_posting_read(dev_priv, crt->adpa_reg);
 957
 958                 drm_dbg_kms(&dev_priv->drm, "crt adpa set to 0x%x\n", adpa);
 959                 crt->force_hotplug_required = true;
 960         }
 961
 962 }
 963
 964 /*
 965  * Routines for controlling stuff on the analog port
 966  */
 967
 968 static const struct drm_connector_funcs intel_crt_connector_funcs = {
 969         .fill_modes = drm_helper_probe_single_connector_modes,
 970         .late_register = intel_connector_register,
 971         .early_unregister = intel_connector_unregister,
 972         .destroy = intel_connector_destroy,
 973         .atomic_destroy_state = drm_atomic_helper_connector_destroy_state,
 974         .atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state,
 975 };
 976
 977 static const struct drm_connector_helper_funcs intel_crt_connector_helper_funcs = {
 978         .detect_ctx = intel_crt_detect,
 979         .mode_valid = intel_crt_mode_valid,
 980         .get_modes = intel_crt_get_modes,
 981 };
 982
 983 static const struct drm_encoder_funcs intel_crt_enc_funcs = {
 984         .reset = intel_crt_reset,
 985         .destroy = intel_encoder_destroy,
 986 };
 987
 988 void intel_crt_init(struct drm_i915_private *dev_priv)
 989 {
 990         struct drm_connector *connector;
 991         struct intel_crt *crt;
 992         struct intel_connector *intel_connector;
 993         i915_reg_t adpa_reg;
 994         u8 ddc_pin;
 995         u32 adpa;
 996
 997         if (HAS_PCH_SPLIT(dev_priv))
 998                 adpa_reg = PCH_ADPA;
 999         else if (IS_VALLEYVIEW(dev_priv))
1000                 adpa_reg = VLV_ADPA;
1001         else
1002                 adpa_reg = ADPA;
1003
1004         adpa = intel_de_read(dev_priv, adpa_reg);
1005         if ((adpa & ADPA_DAC_ENABLE) == 0) {
1006                 /*
1007                  * On some machines (some IVB at least) CRT can be
1008                  * fused off, but there's no known fuse bit to
1009                  * indicate that. On these machine the ADPA register
1010                  * works normally, except the DAC enable bit won't
1011                  * take. So the only way to tell is attempt to enable
1012                  * it and see what happens.
1013                  */
1014                 intel_de_write(dev_priv, adpa_reg,
1015                                adpa | ADPA_DAC_ENABLE | ADPA_HSYNC_CNTL_DISABLE | ADPA_VSYNC_CNTL_DISABLE);
1016                 if ((intel_de_read(dev_priv, adpa_reg) & ADPA_DAC_ENABLE) == 0)
1017                         return;
1018                 intel_de_write(dev_priv, adpa_reg, adpa);
1019         }
1020
1021         crt = kzalloc(sizeof(struct intel_crt), GFP_KERNEL);
1022         if (!crt)
1023                 return;
1024
1025         intel_connector = intel_connector_alloc();
1026         if (!intel_connector) {
1027                 kfree(crt);
1028                 return;
1029         }
1030
1031         ddc_pin = dev_priv->display.vbt.crt_ddc_pin;
1032
1033         connector = &intel_connector->base;
1034         crt->connector = intel_connector;
1035         drm_connector_init_with_ddc(&dev_priv->drm, connector,
1036                                     &intel_crt_connector_funcs,
1037                                     DRM_MODE_CONNECTOR_VGA,
1038                                     intel_gmbus_get_adapter(dev_priv, ddc_pin));
1039
1040         drm_encoder_init(&dev_priv->drm, &crt->base.base, &intel_crt_enc_funcs,
1041                          DRM_MODE_ENCODER_DAC, "CRT");
1042
1043         intel_connector_attach_encoder(intel_connector, &crt->base);
1044
1045         crt->base.type = INTEL_OUTPUT_ANALOG;
1046         crt->base.cloneable = BIT(INTEL_OUTPUT_DVO) | BIT(INTEL_OUTPUT_HDMI);
1047         if (IS_I830(dev_priv))
1048                 crt->base.pipe_mask = BIT(PIPE_A);
1049         else
1050                 crt->base.pipe_mask = ~0;
1051
1052         if (DISPLAY_VER(dev_priv) != 2)
1053                 connector->interlace_allowed = true;
1054
1055         crt->adpa_reg = adpa_reg;
1056
1057         crt->base.power_domain = POWER_DOMAIN_PORT_CRT;
1058
1059         if (I915_HAS_HOTPLUG(dev_priv) &&
1060             !dmi_check_system(intel_spurious_crt_detect)) {
1061                 crt->base.hpd_pin = HPD_CRT;
1062                 crt->base.hotplug = intel_encoder_hotplug;
1063                 intel_connector->polled = DRM_CONNECTOR_POLL_HPD;
1064         } else {
1065                 intel_connector->polled = DRM_CONNECTOR_POLL_CONNECT;
1066         }
1067
1068         if (HAS_DDI(dev_priv)) {
1069                 assert_port_valid(dev_priv, PORT_E);
1070
1071                 crt->base.port = PORT_E;
1072                 crt->base.get_config = hsw_crt_get_config;
1073                 crt->base.get_hw_state = intel_ddi_get_hw_state;
1074                 crt->base.compute_config = hsw_crt_compute_config;
1075                 crt->base.pre_pll_enable = hsw_pre_pll_enable_crt;
1076                 crt->base.pre_enable = hsw_pre_enable_crt;
1077                 crt->base.enable = hsw_enable_crt;
1078                 crt->base.disable = hsw_disable_crt;
1079                 crt->base.post_disable = hsw_post_disable_crt;
1080                 crt->base.enable_clock = hsw_ddi_enable_clock;
1081                 crt->base.disable_clock = hsw_ddi_disable_clock;
1082                 crt->base.is_clock_enabled = hsw_ddi_is_clock_enabled;
1083
1084                 intel_ddi_buf_trans_init(&crt->base);
1085         } else {
1086                 if (HAS_PCH_SPLIT(dev_priv)) {
1087                         crt->base.compute_config = pch_crt_compute_config;
1088                         crt->base.disable = pch_disable_crt;
1089                         crt->base.post_disable = pch_post_disable_crt;
1090                 } else {
1091                         crt->base.compute_config = intel_crt_compute_config;
1092                         crt->base.disable = intel_disable_crt;
1093                 }
1094                 crt->base.port = PORT_NONE;
1095                 crt->base.get_config = intel_crt_get_config;
1096                 crt->base.get_hw_state = intel_crt_get_hw_state;
1097                 crt->base.enable = intel_enable_crt;
1098         }
1099         intel_connector->get_hw_state = intel_connector_get_hw_state;
1100
1101         drm_connector_helper_add(connector, &intel_crt_connector_helper_funcs);
1102
1103         /*
1104          * TODO: find a proper way to discover whether we need to set the the
1105          * polarity and link reversal bits or not, instead of relying on the
1106          * BIOS.
1107          */
1108         if (HAS_PCH_LPT(dev_priv)) {
1109                 u32 fdi_config = FDI_RX_POLARITY_REVERSED_LPT |
1110                                  FDI_RX_LINK_REVERSAL_OVERRIDE;
1111
1112                 dev_priv->display.fdi.rx_config = intel_de_read(dev_priv,
1113                                                                 FDI_RX_CTL(PIPE_A)) & fdi_config;
1114         }
1115
1116         intel_crt_reset(&crt->base.base);
1117 }