drivers/net/dsa/microchip/ksz_common.c

   1 // SPDX-License-Identifier: GPL-2.0
   2 /*
   3  * Microchip switch driver main logic
   4  *
   5  * Copyright (C) 2017-2019 Microchip Technology Inc.
   6  */
   7
   8 #include <linux/delay.h>
   9 #include <linux/dsa/ksz_common.h>
  10 #include <linux/export.h>
  11 #include <linux/gpio/consumer.h>
  12 #include <linux/kernel.h>
  13 #include <linux/module.h>
  14 #include <linux/platform_data/microchip-ksz.h>
  15 #include <linux/phy.h>
  16 #include <linux/etherdevice.h>
  17 #include <linux/if_bridge.h>
  18 #include <linux/if_vlan.h>
  19 #include <linux/if_hsr.h>
  20 #include <linux/irq.h>
  21 #include <linux/irqdomain.h>
  22 #include <linux/of.h>
  23 #include <linux/of_mdio.h>
  24 #include <linux/of_net.h>
  25 #include <linux/micrel_phy.h>
  26 #include <net/dsa.h>
  27 #include <net/pkt_cls.h>
  28 #include <net/switchdev.h>
  29
  30 #include "ksz_common.h"
  31 #include "ksz_ptp.h"
  32 #include "ksz8.h"
  33 #include "ksz9477.h"
  34 #include "lan937x.h"
  35
  36 #define MIB_COUNTER_NUM 0x20
  37
  38 struct ksz_stats_raw {
  39         u64 rx_hi;
  40         u64 rx_undersize;
  41         u64 rx_fragments;
  42         u64 rx_oversize;
  43         u64 rx_jabbers;
  44         u64 rx_symbol_err;
  45         u64 rx_crc_err;
  46         u64 rx_align_err;
  47         u64 rx_mac_ctrl;
  48         u64 rx_pause;
  49         u64 rx_bcast;
  50         u64 rx_mcast;
  51         u64 rx_ucast;
  52         u64 rx_64_or_less;
  53         u64 rx_65_127;
  54         u64 rx_128_255;
  55         u64 rx_256_511;
  56         u64 rx_512_1023;
  57         u64 rx_1024_1522;
  58         u64 rx_1523_2000;
  59         u64 rx_2001;
  60         u64 tx_hi;
  61         u64 tx_late_col;
  62         u64 tx_pause;
  63         u64 tx_bcast;
  64         u64 tx_mcast;
  65         u64 tx_ucast;
  66         u64 tx_deferred;
  67         u64 tx_total_col;
  68         u64 tx_exc_col;
  69         u64 tx_single_col;
  70         u64 tx_mult_col;
  71         u64 rx_total;
  72         u64 tx_total;
  73         u64 rx_discards;
  74         u64 tx_discards;
  75 };
  76
  77 struct ksz88xx_stats_raw {
  78         u64 rx;
  79         u64 rx_hi;
  80         u64 rx_undersize;
  81         u64 rx_fragments;
  82         u64 rx_oversize;
  83         u64 rx_jabbers;
  84         u64 rx_symbol_err;
  85         u64 rx_crc_err;
  86         u64 rx_align_err;
  87         u64 rx_mac_ctrl;
  88         u64 rx_pause;
  89         u64 rx_bcast;
  90         u64 rx_mcast;
  91         u64 rx_ucast;
  92         u64 rx_64_or_less;
  93         u64 rx_65_127;
  94         u64 rx_128_255;
  95         u64 rx_256_511;
  96         u64 rx_512_1023;
  97         u64 rx_1024_1522;
  98         u64 tx;
  99         u64 tx_hi;
 100         u64 tx_late_col;
 101         u64 tx_pause;
 102         u64 tx_bcast;
 103         u64 tx_mcast;
 104         u64 tx_ucast;
 105         u64 tx_deferred;
 106         u64 tx_total_col;
 107         u64 tx_exc_col;
 108         u64 tx_single_col;
 109         u64 tx_mult_col;
 110         u64 rx_discards;
 111         u64 tx_discards;
 112 };
 113
 114 static const struct ksz_mib_names ksz88xx_mib_names[] = {
 115         { 0x00, "rx" },
 116         { 0x01, "rx_hi" },
 117         { 0x02, "rx_undersize" },
 118         { 0x03, "rx_fragments" },
 119         { 0x04, "rx_oversize" },
 120         { 0x05, "rx_jabbers" },
 121         { 0x06, "rx_symbol_err" },
 122         { 0x07, "rx_crc_err" },
 123         { 0x08, "rx_align_err" },
 124         { 0x09, "rx_mac_ctrl" },
 125         { 0x0a, "rx_pause" },
 126         { 0x0b, "rx_bcast" },
 127         { 0x0c, "rx_mcast" },
 128         { 0x0d, "rx_ucast" },
 129         { 0x0e, "rx_64_or_less" },
 130         { 0x0f, "rx_65_127" },
 131         { 0x10, "rx_128_255" },
 132         { 0x11, "rx_256_511" },
 133         { 0x12, "rx_512_1023" },
 134         { 0x13, "rx_1024_1522" },
 135         { 0x14, "tx" },
 136         { 0x15, "tx_hi" },
 137         { 0x16, "tx_late_col" },
 138         { 0x17, "tx_pause" },
 139         { 0x18, "tx_bcast" },
 140         { 0x19, "tx_mcast" },
 141         { 0x1a, "tx_ucast" },
 142         { 0x1b, "tx_deferred" },
 143         { 0x1c, "tx_total_col" },
 144         { 0x1d, "tx_exc_col" },
 145         { 0x1e, "tx_single_col" },
 146         { 0x1f, "tx_mult_col" },
 147         { 0x100, "rx_discards" },
 148         { 0x101, "tx_discards" },
 149 };
 150
 151 static const struct ksz_mib_names ksz9477_mib_names[] = {
 152         { 0x00, "rx_hi" },
 153         { 0x01, "rx_undersize" },
 154         { 0x02, "rx_fragments" },
 155         { 0x03, "rx_oversize" },
 156         { 0x04, "rx_jabbers" },
 157         { 0x05, "rx_symbol_err" },
 158         { 0x06, "rx_crc_err" },
 159         { 0x07, "rx_align_err" },
 160         { 0x08, "rx_mac_ctrl" },
 161         { 0x09, "rx_pause" },
 162         { 0x0A, "rx_bcast" },
 163         { 0x0B, "rx_mcast" },
 164         { 0x0C, "rx_ucast" },
 165         { 0x0D, "rx_64_or_less" },
 166         { 0x0E, "rx_65_127" },
 167         { 0x0F, "rx_128_255" },
 168         { 0x10, "rx_256_511" },
 169         { 0x11, "rx_512_1023" },
 170         { 0x12, "rx_1024_1522" },
 171         { 0x13, "rx_1523_2000" },
 172         { 0x14, "rx_2001" },
 173         { 0x15, "tx_hi" },
 174         { 0x16, "tx_late_col" },
 175         { 0x17, "tx_pause" },
 176         { 0x18, "tx_bcast" },
 177         { 0x19, "tx_mcast" },
 178         { 0x1A, "tx_ucast" },
 179         { 0x1B, "tx_deferred" },
 180         { 0x1C, "tx_total_col" },
 181         { 0x1D, "tx_exc_col" },
 182         { 0x1E, "tx_single_col" },
 183         { 0x1F, "tx_mult_col" },
 184         { 0x80, "rx_total" },
 185         { 0x81, "tx_total" },
 186         { 0x82, "rx_discards" },
 187         { 0x83, "tx_discards" },
 188 };
 189
 190 struct ksz_driver_strength_prop {
 191         const char *name;
 192         int offset;
 193         int value;
 194 };
 195
 196 enum ksz_driver_strength_type {
 197         KSZ_DRIVER_STRENGTH_HI,
 198         KSZ_DRIVER_STRENGTH_LO,
 199         KSZ_DRIVER_STRENGTH_IO,
 200 };
 201
 202 /**
 203  * struct ksz_drive_strength - drive strength mapping
 204  * @reg_val:    register value
 205  * @microamp:   microamp value
 206  */
 207 struct ksz_drive_strength {
 208         u32 reg_val;
 209         u32 microamp;
 210 };
 211
 212 /* ksz9477_drive_strengths - Drive strength mapping for KSZ9477 variants
 213  *
 214  * This values are not documented in KSZ9477 variants but confirmed by
 215  * Microchip that KSZ9477, KSZ9567, KSZ8567, KSZ9897, KSZ9896, KSZ9563, KSZ9893
 216  * and KSZ8563 are using same register (drive strength) settings like KSZ8795.
 217  *
 218  * Documentation in KSZ8795CLX provides more information with some
 219  * recommendations:
 220  * - for high speed signals
 221  *   1. 4 mA or 8 mA is often used for MII, RMII, and SPI interface with using
 222  *      2.5V or 3.3V VDDIO.
 223  *   2. 12 mA or 16 mA is often used for MII, RMII, and SPI interface with
 224  *      using 1.8V VDDIO.
 225  *   3. 20 mA or 24 mA is often used for GMII/RGMII interface with using 2.5V
 226  *      or 3.3V VDDIO.
 227  *   4. 28 mA is often used for GMII/RGMII interface with using 1.8V VDDIO.
 228  *   5. In same interface, the heavy loading should use higher one of the
 229  *      drive current strength.
 230  * - for low speed signals
 231  *   1. 3.3V VDDIO, use either 4 mA or 8 mA.
 232  *   2. 2.5V VDDIO, use either 8 mA or 12 mA.
 233  *   3. 1.8V VDDIO, use either 12 mA or 16 mA.
 234  *   4. If it is heavy loading, can use higher drive current strength.
 235  */
 236 static const struct ksz_drive_strength ksz9477_drive_strengths[] = {
 237         { SW_DRIVE_STRENGTH_2MA,  2000 },
 238         { SW_DRIVE_STRENGTH_4MA,  4000 },
 239         { SW_DRIVE_STRENGTH_8MA,  8000 },
 240         { SW_DRIVE_STRENGTH_12MA, 12000 },
 241         { SW_DRIVE_STRENGTH_16MA, 16000 },
 242         { SW_DRIVE_STRENGTH_20MA, 20000 },
 243         { SW_DRIVE_STRENGTH_24MA, 24000 },
 244         { SW_DRIVE_STRENGTH_28MA, 28000 },
 245 };
 246
 247 /* ksz8830_drive_strengths - Drive strength mapping for KSZ8830, KSZ8873, ..
 248  *                           variants.
 249  * This values are documented in KSZ8873 and KSZ8863 datasheets.
 250  */
 251 static const struct ksz_drive_strength ksz8830_drive_strengths[] = {
 252         { 0,  8000 },
 253         { KSZ8873_DRIVE_STRENGTH_16MA, 16000 },
 254 };
 255
 256 static const struct ksz_dev_ops ksz8_dev_ops = {
 257         .setup = ksz8_setup,
 258         .get_port_addr = ksz8_get_port_addr,
 259         .cfg_port_member = ksz8_cfg_port_member,
 260         .flush_dyn_mac_table = ksz8_flush_dyn_mac_table,
 261         .port_setup = ksz8_port_setup,
 262         .r_phy = ksz8_r_phy,
 263         .w_phy = ksz8_w_phy,
 264         .r_mib_cnt = ksz8_r_mib_cnt,
 265         .r_mib_pkt = ksz8_r_mib_pkt,
 266         .r_mib_stat64 = ksz88xx_r_mib_stats64,
 267         .freeze_mib = ksz8_freeze_mib,
 268         .port_init_cnt = ksz8_port_init_cnt,
 269         .fdb_dump = ksz8_fdb_dump,
 270         .fdb_add = ksz8_fdb_add,
 271         .fdb_del = ksz8_fdb_del,
 272         .mdb_add = ksz8_mdb_add,
 273         .mdb_del = ksz8_mdb_del,
 274         .vlan_filtering = ksz8_port_vlan_filtering,
 275         .vlan_add = ksz8_port_vlan_add,
 276         .vlan_del = ksz8_port_vlan_del,
 277         .mirror_add = ksz8_port_mirror_add,
 278         .mirror_del = ksz8_port_mirror_del,
 279         .get_caps = ksz8_get_caps,
 280         .phylink_mac_link_up = ksz8_phylink_mac_link_up,
 281         .config_cpu_port = ksz8_config_cpu_port,
 282         .enable_stp_addr = ksz8_enable_stp_addr,
 283         .reset = ksz8_reset_switch,
 284         .init = ksz8_switch_init,
 285         .exit = ksz8_switch_exit,
 286         .change_mtu = ksz8_change_mtu,
 287 };
 288
 289 static void ksz9477_phylink_mac_link_up(struct ksz_device *dev, int port,
 290                                         unsigned int mode,
 291                                         phy_interface_t interface,
 292                                         struct phy_device *phydev, int speed,
 293                                         int duplex, bool tx_pause,
 294                                         bool rx_pause);
 295
 296 static const struct ksz_dev_ops ksz9477_dev_ops = {
 297         .setup = ksz9477_setup,
 298         .get_port_addr = ksz9477_get_port_addr,
 299         .cfg_port_member = ksz9477_cfg_port_member,
 300         .flush_dyn_mac_table = ksz9477_flush_dyn_mac_table,
 301         .port_setup = ksz9477_port_setup,
 302         .set_ageing_time = ksz9477_set_ageing_time,
 303         .r_phy = ksz9477_r_phy,
 304         .w_phy = ksz9477_w_phy,
 305         .r_mib_cnt = ksz9477_r_mib_cnt,
 306         .r_mib_pkt = ksz9477_r_mib_pkt,
 307         .r_mib_stat64 = ksz_r_mib_stats64,
 308         .freeze_mib = ksz9477_freeze_mib,
 309         .port_init_cnt = ksz9477_port_init_cnt,
 310         .vlan_filtering = ksz9477_port_vlan_filtering,
 311         .vlan_add = ksz9477_port_vlan_add,
 312         .vlan_del = ksz9477_port_vlan_del,
 313         .mirror_add = ksz9477_port_mirror_add,
 314         .mirror_del = ksz9477_port_mirror_del,
 315         .get_caps = ksz9477_get_caps,
 316         .fdb_dump = ksz9477_fdb_dump,
 317         .fdb_add = ksz9477_fdb_add,
 318         .fdb_del = ksz9477_fdb_del,
 319         .mdb_add = ksz9477_mdb_add,
 320         .mdb_del = ksz9477_mdb_del,
 321         .change_mtu = ksz9477_change_mtu,
 322         .phylink_mac_link_up = ksz9477_phylink_mac_link_up,
 323         .get_wol = ksz9477_get_wol,
 324         .set_wol = ksz9477_set_wol,
 325         .wol_pre_shutdown = ksz9477_wol_pre_shutdown,
 326         .config_cpu_port = ksz9477_config_cpu_port,
 327         .tc_cbs_set_cinc = ksz9477_tc_cbs_set_cinc,
 328         .enable_stp_addr = ksz9477_enable_stp_addr,
 329         .reset = ksz9477_reset_switch,
 330         .init = ksz9477_switch_init,
 331         .exit = ksz9477_switch_exit,
 332 };
 333
 334 static const struct ksz_dev_ops lan937x_dev_ops = {
 335         .setup = lan937x_setup,
 336         .teardown = lan937x_teardown,
 337         .get_port_addr = ksz9477_get_port_addr,
 338         .cfg_port_member = ksz9477_cfg_port_member,
 339         .flush_dyn_mac_table = ksz9477_flush_dyn_mac_table,
 340         .port_setup = lan937x_port_setup,
 341         .set_ageing_time = lan937x_set_ageing_time,
 342         .r_phy = lan937x_r_phy,
 343         .w_phy = lan937x_w_phy,
 344         .r_mib_cnt = ksz9477_r_mib_cnt,
 345         .r_mib_pkt = ksz9477_r_mib_pkt,
 346         .r_mib_stat64 = ksz_r_mib_stats64,
 347         .freeze_mib = ksz9477_freeze_mib,
 348         .port_init_cnt = ksz9477_port_init_cnt,
 349         .vlan_filtering = ksz9477_port_vlan_filtering,
 350         .vlan_add = ksz9477_port_vlan_add,
 351         .vlan_del = ksz9477_port_vlan_del,
 352         .mirror_add = ksz9477_port_mirror_add,
 353         .mirror_del = ksz9477_port_mirror_del,
 354         .get_caps = lan937x_phylink_get_caps,
 355         .setup_rgmii_delay = lan937x_setup_rgmii_delay,
 356         .fdb_dump = ksz9477_fdb_dump,
 357         .fdb_add = ksz9477_fdb_add,
 358         .fdb_del = ksz9477_fdb_del,
 359         .mdb_add = ksz9477_mdb_add,
 360         .mdb_del = ksz9477_mdb_del,
 361         .change_mtu = lan937x_change_mtu,
 362         .phylink_mac_link_up = ksz9477_phylink_mac_link_up,
 363         .config_cpu_port = lan937x_config_cpu_port,
 364         .tc_cbs_set_cinc = lan937x_tc_cbs_set_cinc,
 365         .enable_stp_addr = ksz9477_enable_stp_addr,
 366         .reset = lan937x_reset_switch,
 367         .init = lan937x_switch_init,
 368         .exit = lan937x_switch_exit,
 369 };
 370
 371 static const u16 ksz8795_regs[] = {
 372         [REG_SW_MAC_ADDR]               = 0x68,
 373         [REG_IND_CTRL_0]                = 0x6E,
 374         [REG_IND_DATA_8]                = 0x70,
 375         [REG_IND_DATA_CHECK]            = 0x72,
 376         [REG_IND_DATA_HI]               = 0x71,
 377         [REG_IND_DATA_LO]               = 0x75,
 378         [REG_IND_MIB_CHECK]             = 0x74,
 379         [REG_IND_BYTE]                  = 0xA0,
 380         [P_FORCE_CTRL]                  = 0x0C,
 381         [P_LINK_STATUS]                 = 0x0E,
 382         [P_LOCAL_CTRL]                  = 0x07,
 383         [P_NEG_RESTART_CTRL]            = 0x0D,
 384         [P_REMOTE_STATUS]               = 0x08,
 385         [P_SPEED_STATUS]                = 0x09,
 386         [S_TAIL_TAG_CTRL]               = 0x0C,
 387         [P_STP_CTRL]                    = 0x02,
 388         [S_START_CTRL]                  = 0x01,
 389         [S_BROADCAST_CTRL]              = 0x06,
 390         [S_MULTICAST_CTRL]              = 0x04,
 391         [P_XMII_CTRL_0]                 = 0x06,
 392         [P_XMII_CTRL_1]                 = 0x06,
 393 };
 394
 395 static const u32 ksz8795_masks[] = {
 396         [PORT_802_1P_REMAPPING]         = BIT(7),
 397         [SW_TAIL_TAG_ENABLE]            = BIT(1),
 398         [MIB_COUNTER_OVERFLOW]          = BIT(6),
 399         [MIB_COUNTER_VALID]             = BIT(5),
 400         [VLAN_TABLE_FID]                = GENMASK(6, 0),
 401         [VLAN_TABLE_MEMBERSHIP]         = GENMASK(11, 7),
 402         [VLAN_TABLE_VALID]              = BIT(12),
 403         [STATIC_MAC_TABLE_VALID]        = BIT(21),
 404         [STATIC_MAC_TABLE_USE_FID]      = BIT(23),
 405         [STATIC_MAC_TABLE_FID]          = GENMASK(30, 24),
 406         [STATIC_MAC_TABLE_OVERRIDE]     = BIT(22),
 407         [STATIC_MAC_TABLE_FWD_PORTS]    = GENMASK(20, 16),
 408         [DYNAMIC_MAC_TABLE_ENTRIES_H]   = GENMASK(6, 0),
 409         [DYNAMIC_MAC_TABLE_MAC_EMPTY]   = BIT(7),
 410         [DYNAMIC_MAC_TABLE_NOT_READY]   = BIT(7),
 411         [DYNAMIC_MAC_TABLE_ENTRIES]     = GENMASK(31, 29),
 412         [DYNAMIC_MAC_TABLE_FID]         = GENMASK(22, 16),
 413         [DYNAMIC_MAC_TABLE_SRC_PORT]    = GENMASK(26, 24),
 414         [DYNAMIC_MAC_TABLE_TIMESTAMP]   = GENMASK(28, 27),
 415         [P_MII_TX_FLOW_CTRL]            = BIT(5),
 416         [P_MII_RX_FLOW_CTRL]            = BIT(5),
 417 };
 418
 419 static const u8 ksz8795_xmii_ctrl0[] = {
 420         [P_MII_100MBIT]                 = 0,
 421         [P_MII_10MBIT]                  = 1,
 422         [P_MII_FULL_DUPLEX]             = 0,
 423         [P_MII_HALF_DUPLEX]             = 1,
 424 };
 425
 426 static const u8 ksz8795_xmii_ctrl1[] = {
 427         [P_RGMII_SEL]                   = 3,
 428         [P_GMII_SEL]                    = 2,
 429         [P_RMII_SEL]                    = 1,
 430         [P_MII_SEL]                     = 0,
 431         [P_GMII_1GBIT]                  = 1,
 432         [P_GMII_NOT_1GBIT]              = 0,
 433 };
 434
 435 static const u8 ksz8795_shifts[] = {
 436         [VLAN_TABLE_MEMBERSHIP_S]       = 7,
 437         [VLAN_TABLE]                    = 16,
 438         [STATIC_MAC_FWD_PORTS]          = 16,
 439         [STATIC_MAC_FID]                = 24,
 440         [DYNAMIC_MAC_ENTRIES_H]         = 3,
 441         [DYNAMIC_MAC_ENTRIES]           = 29,
 442         [DYNAMIC_MAC_FID]               = 16,
 443         [DYNAMIC_MAC_TIMESTAMP]         = 27,
 444         [DYNAMIC_MAC_SRC_PORT]          = 24,
 445 };
 446
 447 static const u16 ksz8863_regs[] = {
 448         [REG_SW_MAC_ADDR]               = 0x70,
 449         [REG_IND_CTRL_0]                = 0x79,
 450         [REG_IND_DATA_8]                = 0x7B,
 451         [REG_IND_DATA_CHECK]            = 0x7B,
 452         [REG_IND_DATA_HI]               = 0x7C,
 453         [REG_IND_DATA_LO]               = 0x80,
 454         [REG_IND_MIB_CHECK]             = 0x80,
 455         [P_FORCE_CTRL]                  = 0x0C,
 456         [P_LINK_STATUS]                 = 0x0E,
 457         [P_LOCAL_CTRL]                  = 0x0C,
 458         [P_NEG_RESTART_CTRL]            = 0x0D,
 459         [P_REMOTE_STATUS]               = 0x0E,
 460         [P_SPEED_STATUS]                = 0x0F,
 461         [S_TAIL_TAG_CTRL]               = 0x03,
 462         [P_STP_CTRL]                    = 0x02,
 463         [S_START_CTRL]                  = 0x01,
 464         [S_BROADCAST_CTRL]              = 0x06,
 465         [S_MULTICAST_CTRL]              = 0x04,
 466 };
 467
 468 static const u32 ksz8863_masks[] = {
 469         [PORT_802_1P_REMAPPING]         = BIT(3),
 470         [SW_TAIL_TAG_ENABLE]            = BIT(6),
 471         [MIB_COUNTER_OVERFLOW]          = BIT(7),
 472         [MIB_COUNTER_VALID]             = BIT(6),
 473         [VLAN_TABLE_FID]                = GENMASK(15, 12),
 474         [VLAN_TABLE_MEMBERSHIP]         = GENMASK(18, 16),
 475         [VLAN_TABLE_VALID]              = BIT(19),
 476         [STATIC_MAC_TABLE_VALID]        = BIT(19),
 477         [STATIC_MAC_TABLE_USE_FID]      = BIT(21),
 478         [STATIC_MAC_TABLE_FID]          = GENMASK(25, 22),
 479         [STATIC_MAC_TABLE_OVERRIDE]     = BIT(20),
 480         [STATIC_MAC_TABLE_FWD_PORTS]    = GENMASK(18, 16),
 481         [DYNAMIC_MAC_TABLE_ENTRIES_H]   = GENMASK(1, 0),
 482         [DYNAMIC_MAC_TABLE_MAC_EMPTY]   = BIT(2),
 483         [DYNAMIC_MAC_TABLE_NOT_READY]   = BIT(7),
 484         [DYNAMIC_MAC_TABLE_ENTRIES]     = GENMASK(31, 24),
 485         [DYNAMIC_MAC_TABLE_FID]         = GENMASK(19, 16),
 486         [DYNAMIC_MAC_TABLE_SRC_PORT]    = GENMASK(21, 20),
 487         [DYNAMIC_MAC_TABLE_TIMESTAMP]   = GENMASK(23, 22),
 488 };
 489
 490 static u8 ksz8863_shifts[] = {
 491         [VLAN_TABLE_MEMBERSHIP_S]       = 16,
 492         [STATIC_MAC_FWD_PORTS]          = 16,
 493         [STATIC_MAC_FID]                = 22,
 494         [DYNAMIC_MAC_ENTRIES_H]         = 8,
 495         [DYNAMIC_MAC_ENTRIES]           = 24,
 496         [DYNAMIC_MAC_FID]               = 16,
 497         [DYNAMIC_MAC_TIMESTAMP]         = 22,
 498         [DYNAMIC_MAC_SRC_PORT]          = 20,
 499 };
 500
 501 static const u16 ksz9477_regs[] = {
 502         [REG_SW_MAC_ADDR]               = 0x0302,
 503         [P_STP_CTRL]                    = 0x0B04,
 504         [S_START_CTRL]                  = 0x0300,
 505         [S_BROADCAST_CTRL]              = 0x0332,
 506         [S_MULTICAST_CTRL]              = 0x0331,
 507         [P_XMII_CTRL_0]                 = 0x0300,
 508         [P_XMII_CTRL_1]                 = 0x0301,
 509 };
 510
 511 static const u32 ksz9477_masks[] = {
 512         [ALU_STAT_WRITE]                = 0,
 513         [ALU_STAT_READ]                 = 1,
 514         [P_MII_TX_FLOW_CTRL]            = BIT(5),
 515         [P_MII_RX_FLOW_CTRL]            = BIT(3),
 516 };
 517
 518 static const u8 ksz9477_shifts[] = {
 519         [ALU_STAT_INDEX]                = 16,
 520 };
 521
 522 static const u8 ksz9477_xmii_ctrl0[] = {
 523         [P_MII_100MBIT]                 = 1,
 524         [P_MII_10MBIT]                  = 0,
 525         [P_MII_FULL_DUPLEX]             = 1,
 526         [P_MII_HALF_DUPLEX]             = 0,
 527 };
 528
 529 static const u8 ksz9477_xmii_ctrl1[] = {
 530         [P_RGMII_SEL]                   = 0,
 531         [P_RMII_SEL]                    = 1,
 532         [P_GMII_SEL]                    = 2,
 533         [P_MII_SEL]                     = 3,
 534         [P_GMII_1GBIT]                  = 0,
 535         [P_GMII_NOT_1GBIT]              = 1,
 536 };
 537
 538 static const u32 lan937x_masks[] = {
 539         [ALU_STAT_WRITE]                = 1,
 540         [ALU_STAT_READ]                 = 2,
 541         [P_MII_TX_FLOW_CTRL]            = BIT(5),
 542         [P_MII_RX_FLOW_CTRL]            = BIT(3),
 543 };
 544
 545 static const u8 lan937x_shifts[] = {
 546         [ALU_STAT_INDEX]                = 8,
 547 };
 548
 549 static const struct regmap_range ksz8563_valid_regs[] = {
 550         regmap_reg_range(0x0000, 0x0003),
 551         regmap_reg_range(0x0006, 0x0006),
 552         regmap_reg_range(0x000f, 0x001f),
 553         regmap_reg_range(0x0100, 0x0100),
 554         regmap_reg_range(0x0104, 0x0107),
 555         regmap_reg_range(0x010d, 0x010d),
 556         regmap_reg_range(0x0110, 0x0113),
 557         regmap_reg_range(0x0120, 0x012b),
 558         regmap_reg_range(0x0201, 0x0201),
 559         regmap_reg_range(0x0210, 0x0213),
 560         regmap_reg_range(0x0300, 0x0300),
 561         regmap_reg_range(0x0302, 0x031b),
 562         regmap_reg_range(0x0320, 0x032b),
 563         regmap_reg_range(0x0330, 0x0336),
 564         regmap_reg_range(0x0338, 0x033e),
 565         regmap_reg_range(0x0340, 0x035f),
 566         regmap_reg_range(0x0370, 0x0370),
 567         regmap_reg_range(0x0378, 0x0378),
 568         regmap_reg_range(0x037c, 0x037d),
 569         regmap_reg_range(0x0390, 0x0393),
 570         regmap_reg_range(0x0400, 0x040e),
 571         regmap_reg_range(0x0410, 0x042f),
 572         regmap_reg_range(0x0500, 0x0519),
 573         regmap_reg_range(0x0520, 0x054b),
 574         regmap_reg_range(0x0550, 0x05b3),
 575
 576         /* port 1 */
 577         regmap_reg_range(0x1000, 0x1001),
 578         regmap_reg_range(0x1004, 0x100b),
 579         regmap_reg_range(0x1013, 0x1013),
 580         regmap_reg_range(0x1017, 0x1017),
 581         regmap_reg_range(0x101b, 0x101b),
 582         regmap_reg_range(0x101f, 0x1021),
 583         regmap_reg_range(0x1030, 0x1030),
 584         regmap_reg_range(0x1100, 0x1111),
 585         regmap_reg_range(0x111a, 0x111d),
 586         regmap_reg_range(0x1122, 0x1127),
 587         regmap_reg_range(0x112a, 0x112b),
 588         regmap_reg_range(0x1136, 0x1139),
 589         regmap_reg_range(0x113e, 0x113f),
 590         regmap_reg_range(0x1400, 0x1401),
 591         regmap_reg_range(0x1403, 0x1403),
 592         regmap_reg_range(0x1410, 0x1417),
 593         regmap_reg_range(0x1420, 0x1423),
 594         regmap_reg_range(0x1500, 0x1507),
 595         regmap_reg_range(0x1600, 0x1612),
 596         regmap_reg_range(0x1800, 0x180f),
 597         regmap_reg_range(0x1900, 0x1907),
 598         regmap_reg_range(0x1914, 0x191b),
 599         regmap_reg_range(0x1a00, 0x1a03),
 600         regmap_reg_range(0x1a04, 0x1a08),
 601         regmap_reg_range(0x1b00, 0x1b01),
 602         regmap_reg_range(0x1b04, 0x1b04),
 603         regmap_reg_range(0x1c00, 0x1c05),
 604         regmap_reg_range(0x1c08, 0x1c1b),
 605
 606         /* port 2 */
 607         regmap_reg_range(0x2000, 0x2001),
 608         regmap_reg_range(0x2004, 0x200b),
 609         regmap_reg_range(0x2013, 0x2013),
 610         regmap_reg_range(0x2017, 0x2017),
 611         regmap_reg_range(0x201b, 0x201b),
 612         regmap_reg_range(0x201f, 0x2021),
 613         regmap_reg_range(0x2030, 0x2030),
 614         regmap_reg_range(0x2100, 0x2111),
 615         regmap_reg_range(0x211a, 0x211d),
 616         regmap_reg_range(0x2122, 0x2127),
 617         regmap_reg_range(0x212a, 0x212b),
 618         regmap_reg_range(0x2136, 0x2139),
 619         regmap_reg_range(0x213e, 0x213f),
 620         regmap_reg_range(0x2400, 0x2401),
 621         regmap_reg_range(0x2403, 0x2403),
 622         regmap_reg_range(0x2410, 0x2417),
 623         regmap_reg_range(0x2420, 0x2423),
 624         regmap_reg_range(0x2500, 0x2507),
 625         regmap_reg_range(0x2600, 0x2612),
 626         regmap_reg_range(0x2800, 0x280f),
 627         regmap_reg_range(0x2900, 0x2907),
 628         regmap_reg_range(0x2914, 0x291b),
 629         regmap_reg_range(0x2a00, 0x2a03),
 630         regmap_reg_range(0x2a04, 0x2a08),
 631         regmap_reg_range(0x2b00, 0x2b01),
 632         regmap_reg_range(0x2b04, 0x2b04),
 633         regmap_reg_range(0x2c00, 0x2c05),
 634         regmap_reg_range(0x2c08, 0x2c1b),
 635
 636         /* port 3 */
 637         regmap_reg_range(0x3000, 0x3001),
 638         regmap_reg_range(0x3004, 0x300b),
 639         regmap_reg_range(0x3013, 0x3013),
 640         regmap_reg_range(0x3017, 0x3017),
 641         regmap_reg_range(0x301b, 0x301b),
 642         regmap_reg_range(0x301f, 0x3021),
 643         regmap_reg_range(0x3030, 0x3030),
 644         regmap_reg_range(0x3300, 0x3301),
 645         regmap_reg_range(0x3303, 0x3303),
 646         regmap_reg_range(0x3400, 0x3401),
 647         regmap_reg_range(0x3403, 0x3403),
 648         regmap_reg_range(0x3410, 0x3417),
 649         regmap_reg_range(0x3420, 0x3423),
 650         regmap_reg_range(0x3500, 0x3507),
 651         regmap_reg_range(0x3600, 0x3612),
 652         regmap_reg_range(0x3800, 0x380f),
 653         regmap_reg_range(0x3900, 0x3907),
 654         regmap_reg_range(0x3914, 0x391b),
 655         regmap_reg_range(0x3a00, 0x3a03),
 656         regmap_reg_range(0x3a04, 0x3a08),
 657         regmap_reg_range(0x3b00, 0x3b01),
 658         regmap_reg_range(0x3b04, 0x3b04),
 659         regmap_reg_range(0x3c00, 0x3c05),
 660         regmap_reg_range(0x3c08, 0x3c1b),
 661 };
 662
 663 static const struct regmap_access_table ksz8563_register_set = {
 664         .yes_ranges = ksz8563_valid_regs,
 665         .n_yes_ranges = ARRAY_SIZE(ksz8563_valid_regs),
 666 };
 667
 668 static const struct regmap_range ksz9477_valid_regs[] = {
 669         regmap_reg_range(0x0000, 0x0003),
 670         regmap_reg_range(0x0006, 0x0006),
 671         regmap_reg_range(0x0010, 0x001f),
 672         regmap_reg_range(0x0100, 0x0100),
 673         regmap_reg_range(0x0103, 0x0107),
 674         regmap_reg_range(0x010d, 0x010d),
 675         regmap_reg_range(0x0110, 0x0113),
 676         regmap_reg_range(0x0120, 0x012b),
 677         regmap_reg_range(0x0201, 0x0201),
 678         regmap_reg_range(0x0210, 0x0213),
 679         regmap_reg_range(0x0300, 0x0300),
 680         regmap_reg_range(0x0302, 0x031b),
 681         regmap_reg_range(0x0320, 0x032b),
 682         regmap_reg_range(0x0330, 0x0336),
 683         regmap_reg_range(0x0338, 0x033b),
 684         regmap_reg_range(0x033e, 0x033e),
 685         regmap_reg_range(0x0340, 0x035f),
 686         regmap_reg_range(0x0370, 0x0370),
 687         regmap_reg_range(0x0378, 0x0378),
 688         regmap_reg_range(0x037c, 0x037d),
 689         regmap_reg_range(0x0390, 0x0393),
 690         regmap_reg_range(0x0400, 0x040e),
 691         regmap_reg_range(0x0410, 0x042f),
 692         regmap_reg_range(0x0444, 0x044b),
 693         regmap_reg_range(0x0450, 0x046f),
 694         regmap_reg_range(0x0500, 0x0519),
 695         regmap_reg_range(0x0520, 0x054b),
 696         regmap_reg_range(0x0550, 0x05b3),
 697         regmap_reg_range(0x0604, 0x060b),
 698         regmap_reg_range(0x0610, 0x0612),
 699         regmap_reg_range(0x0614, 0x062c),
 700         regmap_reg_range(0x0640, 0x0645),
 701         regmap_reg_range(0x0648, 0x064d),
 702
 703         /* port 1 */
 704         regmap_reg_range(0x1000, 0x1001),
 705         regmap_reg_range(0x1013, 0x1013),
 706         regmap_reg_range(0x1017, 0x1017),
 707         regmap_reg_range(0x101b, 0x101b),
 708         regmap_reg_range(0x101f, 0x1020),
 709         regmap_reg_range(0x1030, 0x1030),
 710         regmap_reg_range(0x1100, 0x1115),
 711         regmap_reg_range(0x111a, 0x111f),
 712         regmap_reg_range(0x1120, 0x112b),
 713         regmap_reg_range(0x1134, 0x113b),
 714         regmap_reg_range(0x113c, 0x113f),
 715         regmap_reg_range(0x1400, 0x1401),
 716         regmap_reg_range(0x1403, 0x1403),
 717         regmap_reg_range(0x1410, 0x1417),
 718         regmap_reg_range(0x1420, 0x1423),
 719         regmap_reg_range(0x1500, 0x1507),
 720         regmap_reg_range(0x1600, 0x1613),
 721         regmap_reg_range(0x1800, 0x180f),
 722         regmap_reg_range(0x1820, 0x1827),
 723         regmap_reg_range(0x1830, 0x1837),
 724         regmap_reg_range(0x1840, 0x184b),
 725         regmap_reg_range(0x1900, 0x1907),
 726         regmap_reg_range(0x1914, 0x191b),
 727         regmap_reg_range(0x1920, 0x1920),
 728         regmap_reg_range(0x1923, 0x1927),
 729         regmap_reg_range(0x1a00, 0x1a03),
 730         regmap_reg_range(0x1a04, 0x1a07),
 731         regmap_reg_range(0x1b00, 0x1b01),
 732         regmap_reg_range(0x1b04, 0x1b04),
 733         regmap_reg_range(0x1c00, 0x1c05),
 734         regmap_reg_range(0x1c08, 0x1c1b),
 735
 736         /* port 2 */
 737         regmap_reg_range(0x2000, 0x2001),
 738         regmap_reg_range(0x2013, 0x2013),
 739         regmap_reg_range(0x2017, 0x2017),
 740         regmap_reg_range(0x201b, 0x201b),
 741         regmap_reg_range(0x201f, 0x2020),
 742         regmap_reg_range(0x2030, 0x2030),
 743         regmap_reg_range(0x2100, 0x2115),
 744         regmap_reg_range(0x211a, 0x211f),
 745         regmap_reg_range(0x2120, 0x212b),
 746         regmap_reg_range(0x2134, 0x213b),
 747         regmap_reg_range(0x213c, 0x213f),
 748         regmap_reg_range(0x2400, 0x2401),
 749         regmap_reg_range(0x2403, 0x2403),
 750         regmap_reg_range(0x2410, 0x2417),
 751         regmap_reg_range(0x2420, 0x2423),
 752         regmap_reg_range(0x2500, 0x2507),
 753         regmap_reg_range(0x2600, 0x2613),
 754         regmap_reg_range(0x2800, 0x280f),
 755         regmap_reg_range(0x2820, 0x2827),
 756         regmap_reg_range(0x2830, 0x2837),
 757         regmap_reg_range(0x2840, 0x284b),
 758         regmap_reg_range(0x2900, 0x2907),
 759         regmap_reg_range(0x2914, 0x291b),
 760         regmap_reg_range(0x2920, 0x2920),
 761         regmap_reg_range(0x2923, 0x2927),
 762         regmap_reg_range(0x2a00, 0x2a03),
 763         regmap_reg_range(0x2a04, 0x2a07),
 764         regmap_reg_range(0x2b00, 0x2b01),
 765         regmap_reg_range(0x2b04, 0x2b04),
 766         regmap_reg_range(0x2c00, 0x2c05),
 767         regmap_reg_range(0x2c08, 0x2c1b),
 768
 769         /* port 3 */
 770         regmap_reg_range(0x3000, 0x3001),
 771         regmap_reg_range(0x3013, 0x3013),
 772         regmap_reg_range(0x3017, 0x3017),
 773         regmap_reg_range(0x301b, 0x301b),
 774         regmap_reg_range(0x301f, 0x3020),
 775         regmap_reg_range(0x3030, 0x3030),
 776         regmap_reg_range(0x3100, 0x3115),
 777         regmap_reg_range(0x311a, 0x311f),
 778         regmap_reg_range(0x3120, 0x312b),
 779         regmap_reg_range(0x3134, 0x313b),
 780         regmap_reg_range(0x313c, 0x313f),
 781         regmap_reg_range(0x3400, 0x3401),
 782         regmap_reg_range(0x3403, 0x3403),
 783         regmap_reg_range(0x3410, 0x3417),
 784         regmap_reg_range(0x3420, 0x3423),
 785         regmap_reg_range(0x3500, 0x3507),
 786         regmap_reg_range(0x3600, 0x3613),
 787         regmap_reg_range(0x3800, 0x380f),
 788         regmap_reg_range(0x3820, 0x3827),
 789         regmap_reg_range(0x3830, 0x3837),
 790         regmap_reg_range(0x3840, 0x384b),
 791         regmap_reg_range(0x3900, 0x3907),
 792         regmap_reg_range(0x3914, 0x391b),
 793         regmap_reg_range(0x3920, 0x3920),
 794         regmap_reg_range(0x3923, 0x3927),
 795         regmap_reg_range(0x3a00, 0x3a03),
 796         regmap_reg_range(0x3a04, 0x3a07),
 797         regmap_reg_range(0x3b00, 0x3b01),
 798         regmap_reg_range(0x3b04, 0x3b04),
 799         regmap_reg_range(0x3c00, 0x3c05),
 800         regmap_reg_range(0x3c08, 0x3c1b),
 801
 802         /* port 4 */
 803         regmap_reg_range(0x4000, 0x4001),
 804         regmap_reg_range(0x4013, 0x4013),
 805         regmap_reg_range(0x4017, 0x4017),
 806         regmap_reg_range(0x401b, 0x401b),
 807         regmap_reg_range(0x401f, 0x4020),
 808         regmap_reg_range(0x4030, 0x4030),
 809         regmap_reg_range(0x4100, 0x4115),
 810         regmap_reg_range(0x411a, 0x411f),
 811         regmap_reg_range(0x4120, 0x412b),
 812         regmap_reg_range(0x4134, 0x413b),
 813         regmap_reg_range(0x413c, 0x413f),
 814         regmap_reg_range(0x4400, 0x4401),
 815         regmap_reg_range(0x4403, 0x4403),
 816         regmap_reg_range(0x4410, 0x4417),
 817         regmap_reg_range(0x4420, 0x4423),
 818         regmap_reg_range(0x4500, 0x4507),
 819         regmap_reg_range(0x4600, 0x4613),
 820         regmap_reg_range(0x4800, 0x480f),
 821         regmap_reg_range(0x4820, 0x4827),
 822         regmap_reg_range(0x4830, 0x4837),
 823         regmap_reg_range(0x4840, 0x484b),
 824         regmap_reg_range(0x4900, 0x4907),
 825         regmap_reg_range(0x4914, 0x491b),
 826         regmap_reg_range(0x4920, 0x4920),
 827         regmap_reg_range(0x4923, 0x4927),
 828         regmap_reg_range(0x4a00, 0x4a03),
 829         regmap_reg_range(0x4a04, 0x4a07),
 830         regmap_reg_range(0x4b00, 0x4b01),
 831         regmap_reg_range(0x4b04, 0x4b04),
 832         regmap_reg_range(0x4c00, 0x4c05),
 833         regmap_reg_range(0x4c08, 0x4c1b),
 834
 835         /* port 5 */
 836         regmap_reg_range(0x5000, 0x5001),
 837         regmap_reg_range(0x5013, 0x5013),
 838         regmap_reg_range(0x5017, 0x5017),
 839         regmap_reg_range(0x501b, 0x501b),
 840         regmap_reg_range(0x501f, 0x5020),
 841         regmap_reg_range(0x5030, 0x5030),
 842         regmap_reg_range(0x5100, 0x5115),
 843         regmap_reg_range(0x511a, 0x511f),
 844         regmap_reg_range(0x5120, 0x512b),
 845         regmap_reg_range(0x5134, 0x513b),
 846         regmap_reg_range(0x513c, 0x513f),
 847         regmap_reg_range(0x5400, 0x5401),
 848         regmap_reg_range(0x5403, 0x5403),
 849         regmap_reg_range(0x5410, 0x5417),
 850         regmap_reg_range(0x5420, 0x5423),
 851         regmap_reg_range(0x5500, 0x5507),
 852         regmap_reg_range(0x5600, 0x5613),
 853         regmap_reg_range(0x5800, 0x580f),
 854         regmap_reg_range(0x5820, 0x5827),
 855         regmap_reg_range(0x5830, 0x5837),
 856         regmap_reg_range(0x5840, 0x584b),
 857         regmap_reg_range(0x5900, 0x5907),
 858         regmap_reg_range(0x5914, 0x591b),
 859         regmap_reg_range(0x5920, 0x5920),
 860         regmap_reg_range(0x5923, 0x5927),
 861         regmap_reg_range(0x5a00, 0x5a03),
 862         regmap_reg_range(0x5a04, 0x5a07),
 863         regmap_reg_range(0x5b00, 0x5b01),
 864         regmap_reg_range(0x5b04, 0x5b04),
 865         regmap_reg_range(0x5c00, 0x5c05),
 866         regmap_reg_range(0x5c08, 0x5c1b),
 867
 868         /* port 6 */
 869         regmap_reg_range(0x6000, 0x6001),
 870         regmap_reg_range(0x6013, 0x6013),
 871         regmap_reg_range(0x6017, 0x6017),
 872         regmap_reg_range(0x601b, 0x601b),
 873         regmap_reg_range(0x601f, 0x6020),
 874         regmap_reg_range(0x6030, 0x6030),
 875         regmap_reg_range(0x6300, 0x6301),
 876         regmap_reg_range(0x6400, 0x6401),
 877         regmap_reg_range(0x6403, 0x6403),
 878         regmap_reg_range(0x6410, 0x6417),
 879         regmap_reg_range(0x6420, 0x6423),
 880         regmap_reg_range(0x6500, 0x6507),
 881         regmap_reg_range(0x6600, 0x6613),
 882         regmap_reg_range(0x6800, 0x680f),
 883         regmap_reg_range(0x6820, 0x6827),
 884         regmap_reg_range(0x6830, 0x6837),
 885         regmap_reg_range(0x6840, 0x684b),
 886         regmap_reg_range(0x6900, 0x6907),
 887         regmap_reg_range(0x6914, 0x691b),
 888         regmap_reg_range(0x6920, 0x6920),
 889         regmap_reg_range(0x6923, 0x6927),
 890         regmap_reg_range(0x6a00, 0x6a03),
 891         regmap_reg_range(0x6a04, 0x6a07),
 892         regmap_reg_range(0x6b00, 0x6b01),
 893         regmap_reg_range(0x6b04, 0x6b04),
 894         regmap_reg_range(0x6c00, 0x6c05),
 895         regmap_reg_range(0x6c08, 0x6c1b),
 896
 897         /* port 7 */
 898         regmap_reg_range(0x7000, 0x7001),
 899         regmap_reg_range(0x7013, 0x7013),
 900         regmap_reg_range(0x7017, 0x7017),
 901         regmap_reg_range(0x701b, 0x701b),
 902         regmap_reg_range(0x701f, 0x7020),
 903         regmap_reg_range(0x7030, 0x7030),
 904         regmap_reg_range(0x7200, 0x7203),
 905         regmap_reg_range(0x7206, 0x7207),
 906         regmap_reg_range(0x7300, 0x7301),
 907         regmap_reg_range(0x7400, 0x7401),
 908         regmap_reg_range(0x7403, 0x7403),
 909         regmap_reg_range(0x7410, 0x7417),
 910         regmap_reg_range(0x7420, 0x7423),
 911         regmap_reg_range(0x7500, 0x7507),
 912         regmap_reg_range(0x7600, 0x7613),
 913         regmap_reg_range(0x7800, 0x780f),
 914         regmap_reg_range(0x7820, 0x7827),
 915         regmap_reg_range(0x7830, 0x7837),
 916         regmap_reg_range(0x7840, 0x784b),
 917         regmap_reg_range(0x7900, 0x7907),
 918         regmap_reg_range(0x7914, 0x791b),
 919         regmap_reg_range(0x7920, 0x7920),
 920         regmap_reg_range(0x7923, 0x7927),
 921         regmap_reg_range(0x7a00, 0x7a03),
 922         regmap_reg_range(0x7a04, 0x7a07),
 923         regmap_reg_range(0x7b00, 0x7b01),
 924         regmap_reg_range(0x7b04, 0x7b04),
 925         regmap_reg_range(0x7c00, 0x7c05),
 926         regmap_reg_range(0x7c08, 0x7c1b),
 927 };
 928
 929 static const struct regmap_access_table ksz9477_register_set = {
 930         .yes_ranges = ksz9477_valid_regs,
 931         .n_yes_ranges = ARRAY_SIZE(ksz9477_valid_regs),
 932 };
 933
 934 static const struct regmap_range ksz9896_valid_regs[] = {
 935         regmap_reg_range(0x0000, 0x0003),
 936         regmap_reg_range(0x0006, 0x0006),
 937         regmap_reg_range(0x0010, 0x001f),
 938         regmap_reg_range(0x0100, 0x0100),
 939         regmap_reg_range(0x0103, 0x0107),
 940         regmap_reg_range(0x010d, 0x010d),
 941         regmap_reg_range(0x0110, 0x0113),
 942         regmap_reg_range(0x0120, 0x0127),
 943         regmap_reg_range(0x0201, 0x0201),
 944         regmap_reg_range(0x0210, 0x0213),
 945         regmap_reg_range(0x0300, 0x0300),
 946         regmap_reg_range(0x0302, 0x030b),
 947         regmap_reg_range(0x0310, 0x031b),
 948         regmap_reg_range(0x0320, 0x032b),
 949         regmap_reg_range(0x0330, 0x0336),
 950         regmap_reg_range(0x0338, 0x033b),
 951         regmap_reg_range(0x033e, 0x033e),
 952         regmap_reg_range(0x0340, 0x035f),
 953         regmap_reg_range(0x0370, 0x0370),
 954         regmap_reg_range(0x0378, 0x0378),
 955         regmap_reg_range(0x037c, 0x037d),
 956         regmap_reg_range(0x0390, 0x0393),
 957         regmap_reg_range(0x0400, 0x040e),
 958         regmap_reg_range(0x0410, 0x042f),
 959
 960         /* port 1 */
 961         regmap_reg_range(0x1000, 0x1001),
 962         regmap_reg_range(0x1013, 0x1013),
 963         regmap_reg_range(0x1017, 0x1017),
 964         regmap_reg_range(0x101b, 0x101b),
 965         regmap_reg_range(0x101f, 0x1020),
 966         regmap_reg_range(0x1030, 0x1030),
 967         regmap_reg_range(0x1100, 0x1115),
 968         regmap_reg_range(0x111a, 0x111f),
 969         regmap_reg_range(0x1122, 0x1127),
 970         regmap_reg_range(0x112a, 0x112b),
 971         regmap_reg_range(0x1136, 0x1139),
 972         regmap_reg_range(0x113e, 0x113f),
 973         regmap_reg_range(0x1400, 0x1401),
 974         regmap_reg_range(0x1403, 0x1403),
 975         regmap_reg_range(0x1410, 0x1417),
 976         regmap_reg_range(0x1420, 0x1423),
 977         regmap_reg_range(0x1500, 0x1507),
 978         regmap_reg_range(0x1600, 0x1612),
 979         regmap_reg_range(0x1800, 0x180f),
 980         regmap_reg_range(0x1820, 0x1827),
 981         regmap_reg_range(0x1830, 0x1837),
 982         regmap_reg_range(0x1840, 0x184b),
 983         regmap_reg_range(0x1900, 0x1907),
 984         regmap_reg_range(0x1914, 0x1915),
 985         regmap_reg_range(0x1a00, 0x1a03),
 986         regmap_reg_range(0x1a04, 0x1a07),
 987         regmap_reg_range(0x1b00, 0x1b01),
 988         regmap_reg_range(0x1b04, 0x1b04),
 989
 990         /* port 2 */
 991         regmap_reg_range(0x2000, 0x2001),
 992         regmap_reg_range(0x2013, 0x2013),
 993         regmap_reg_range(0x2017, 0x2017),
 994         regmap_reg_range(0x201b, 0x201b),
 995         regmap_reg_range(0x201f, 0x2020),
 996         regmap_reg_range(0x2030, 0x2030),
 997         regmap_reg_range(0x2100, 0x2115),
 998         regmap_reg_range(0x211a, 0x211f),
 999         regmap_reg_range(0x2122, 0x2127),
1000         regmap_reg_range(0x212a, 0x212b),
1001         regmap_reg_range(0x2136, 0x2139),
1002         regmap_reg_range(0x213e, 0x213f),
1003         regmap_reg_range(0x2400, 0x2401),
1004         regmap_reg_range(0x2403, 0x2403),
1005         regmap_reg_range(0x2410, 0x2417),
1006         regmap_reg_range(0x2420, 0x2423),
1007         regmap_reg_range(0x2500, 0x2507),
1008         regmap_reg_range(0x2600, 0x2612),
1009         regmap_reg_range(0x2800, 0x280f),
1010         regmap_reg_range(0x2820, 0x2827),
1011         regmap_reg_range(0x2830, 0x2837),
1012         regmap_reg_range(0x2840, 0x284b),
1013         regmap_reg_range(0x2900, 0x2907),
1014         regmap_reg_range(0x2914, 0x2915),
1015         regmap_reg_range(0x2a00, 0x2a03),
1016         regmap_reg_range(0x2a04, 0x2a07),
1017         regmap_reg_range(0x2b00, 0x2b01),
1018         regmap_reg_range(0x2b04, 0x2b04),
1019
1020         /* port 3 */
1021         regmap_reg_range(0x3000, 0x3001),
1022         regmap_reg_range(0x3013, 0x3013),
1023         regmap_reg_range(0x3017, 0x3017),
1024         regmap_reg_range(0x301b, 0x301b),
1025         regmap_reg_range(0x301f, 0x3020),
1026         regmap_reg_range(0x3030, 0x3030),
1027         regmap_reg_range(0x3100, 0x3115),
1028         regmap_reg_range(0x311a, 0x311f),
1029         regmap_reg_range(0x3122, 0x3127),
1030         regmap_reg_range(0x312a, 0x312b),
1031         regmap_reg_range(0x3136, 0x3139),
1032         regmap_reg_range(0x313e, 0x313f),
1033         regmap_reg_range(0x3400, 0x3401),
1034         regmap_reg_range(0x3403, 0x3403),
1035         regmap_reg_range(0x3410, 0x3417),
1036         regmap_reg_range(0x3420, 0x3423),
1037         regmap_reg_range(0x3500, 0x3507),
1038         regmap_reg_range(0x3600, 0x3612),
1039         regmap_reg_range(0x3800, 0x380f),
1040         regmap_reg_range(0x3820, 0x3827),
1041         regmap_reg_range(0x3830, 0x3837),
1042         regmap_reg_range(0x3840, 0x384b),
1043         regmap_reg_range(0x3900, 0x3907),
1044         regmap_reg_range(0x3914, 0x3915),
1045         regmap_reg_range(0x3a00, 0x3a03),
1046         regmap_reg_range(0x3a04, 0x3a07),
1047         regmap_reg_range(0x3b00, 0x3b01),
1048         regmap_reg_range(0x3b04, 0x3b04),
1049
1050         /* port 4 */
1051         regmap_reg_range(0x4000, 0x4001),
1052         regmap_reg_range(0x4013, 0x4013),
1053         regmap_reg_range(0x4017, 0x4017),
1054         regmap_reg_range(0x401b, 0x401b),
1055         regmap_reg_range(0x401f, 0x4020),
1056         regmap_reg_range(0x4030, 0x4030),
1057         regmap_reg_range(0x4100, 0x4115),
1058         regmap_reg_range(0x411a, 0x411f),
1059         regmap_reg_range(0x4122, 0x4127),
1060         regmap_reg_range(0x412a, 0x412b),
1061         regmap_reg_range(0x4136, 0x4139),
1062         regmap_reg_range(0x413e, 0x413f),
1063         regmap_reg_range(0x4400, 0x4401),
1064         regmap_reg_range(0x4403, 0x4403),
1065         regmap_reg_range(0x4410, 0x4417),
1066         regmap_reg_range(0x4420, 0x4423),
1067         regmap_reg_range(0x4500, 0x4507),
1068         regmap_reg_range(0x4600, 0x4612),
1069         regmap_reg_range(0x4800, 0x480f),
1070         regmap_reg_range(0x4820, 0x4827),
1071         regmap_reg_range(0x4830, 0x4837),
1072         regmap_reg_range(0x4840, 0x484b),
1073         regmap_reg_range(0x4900, 0x4907),
1074         regmap_reg_range(0x4914, 0x4915),
1075         regmap_reg_range(0x4a00, 0x4a03),
1076         regmap_reg_range(0x4a04, 0x4a07),
1077         regmap_reg_range(0x4b00, 0x4b01),
1078         regmap_reg_range(0x4b04, 0x4b04),
1079
1080         /* port 5 */
1081         regmap_reg_range(0x5000, 0x5001),
1082         regmap_reg_range(0x5013, 0x5013),
1083         regmap_reg_range(0x5017, 0x5017),
1084         regmap_reg_range(0x501b, 0x501b),
1085         regmap_reg_range(0x501f, 0x5020),
1086         regmap_reg_range(0x5030, 0x5030),
1087         regmap_reg_range(0x5100, 0x5115),
1088         regmap_reg_range(0x511a, 0x511f),
1089         regmap_reg_range(0x5122, 0x5127),
1090         regmap_reg_range(0x512a, 0x512b),
1091         regmap_reg_range(0x5136, 0x5139),
1092         regmap_reg_range(0x513e, 0x513f),
1093         regmap_reg_range(0x5400, 0x5401),
1094         regmap_reg_range(0x5403, 0x5403),
1095         regmap_reg_range(0x5410, 0x5417),
1096         regmap_reg_range(0x5420, 0x5423),
1097         regmap_reg_range(0x5500, 0x5507),
1098         regmap_reg_range(0x5600, 0x5612),
1099         regmap_reg_range(0x5800, 0x580f),
1100         regmap_reg_range(0x5820, 0x5827),
1101         regmap_reg_range(0x5830, 0x5837),
1102         regmap_reg_range(0x5840, 0x584b),
1103         regmap_reg_range(0x5900, 0x5907),
1104         regmap_reg_range(0x5914, 0x5915),
1105         regmap_reg_range(0x5a00, 0x5a03),
1106         regmap_reg_range(0x5a04, 0x5a07),
1107         regmap_reg_range(0x5b00, 0x5b01),
1108         regmap_reg_range(0x5b04, 0x5b04),
1109
1110         /* port 6 */
1111         regmap_reg_range(0x6000, 0x6001),
1112         regmap_reg_range(0x6013, 0x6013),
1113         regmap_reg_range(0x6017, 0x6017),
1114         regmap_reg_range(0x601b, 0x601b),
1115         regmap_reg_range(0x601f, 0x6020),
1116         regmap_reg_range(0x6030, 0x6030),
1117         regmap_reg_range(0x6100, 0x6115),
1118         regmap_reg_range(0x611a, 0x611f),
1119         regmap_reg_range(0x6122, 0x6127),
1120         regmap_reg_range(0x612a, 0x612b),
1121         regmap_reg_range(0x6136, 0x6139),
1122         regmap_reg_range(0x613e, 0x613f),
1123         regmap_reg_range(0x6300, 0x6301),
1124         regmap_reg_range(0x6400, 0x6401),
1125         regmap_reg_range(0x6403, 0x6403),
1126         regmap_reg_range(0x6410, 0x6417),
1127         regmap_reg_range(0x6420, 0x6423),
1128         regmap_reg_range(0x6500, 0x6507),
1129         regmap_reg_range(0x6600, 0x6612),
1130         regmap_reg_range(0x6800, 0x680f),
1131         regmap_reg_range(0x6820, 0x6827),
1132         regmap_reg_range(0x6830, 0x6837),
1133         regmap_reg_range(0x6840, 0x684b),
1134         regmap_reg_range(0x6900, 0x6907),
1135         regmap_reg_range(0x6914, 0x6915),
1136         regmap_reg_range(0x6a00, 0x6a03),
1137         regmap_reg_range(0x6a04, 0x6a07),
1138         regmap_reg_range(0x6b00, 0x6b01),
1139         regmap_reg_range(0x6b04, 0x6b04),
1140 };
1141
1142 static const struct regmap_access_table ksz9896_register_set = {
1143         .yes_ranges = ksz9896_valid_regs,
1144         .n_yes_ranges = ARRAY_SIZE(ksz9896_valid_regs),
1145 };
1146
1147 static const struct regmap_range ksz8873_valid_regs[] = {
1148         regmap_reg_range(0x00, 0x01),
1149         /* global control register */
1150         regmap_reg_range(0x02, 0x0f),
1151
1152         /* port registers */
1153         regmap_reg_range(0x10, 0x1d),
1154         regmap_reg_range(0x1e, 0x1f),
1155         regmap_reg_range(0x20, 0x2d),
1156         regmap_reg_range(0x2e, 0x2f),
1157         regmap_reg_range(0x30, 0x39),
1158         regmap_reg_range(0x3f, 0x3f),
1159
1160         /* advanced control registers */
1161         regmap_reg_range(0x60, 0x6f),
1162         regmap_reg_range(0x70, 0x75),
1163         regmap_reg_range(0x76, 0x78),
1164         regmap_reg_range(0x79, 0x7a),
1165         regmap_reg_range(0x7b, 0x83),
1166         regmap_reg_range(0x8e, 0x99),
1167         regmap_reg_range(0x9a, 0xa5),
1168         regmap_reg_range(0xa6, 0xa6),
1169         regmap_reg_range(0xa7, 0xaa),
1170         regmap_reg_range(0xab, 0xae),
1171         regmap_reg_range(0xaf, 0xba),
1172         regmap_reg_range(0xbb, 0xbc),
1173         regmap_reg_range(0xbd, 0xbd),
1174         regmap_reg_range(0xc0, 0xc0),
1175         regmap_reg_range(0xc2, 0xc2),
1176         regmap_reg_range(0xc3, 0xc3),
1177         regmap_reg_range(0xc4, 0xc4),
1178         regmap_reg_range(0xc6, 0xc6),
1179 };
1180
1181 static const struct regmap_access_table ksz8873_register_set = {
1182         .yes_ranges = ksz8873_valid_regs,
1183         .n_yes_ranges = ARRAY_SIZE(ksz8873_valid_regs),
1184 };
1185
1186 const struct ksz_chip_data ksz_switch_chips[] = {
1187         [KSZ8563] = {
1188                 .chip_id = KSZ8563_CHIP_ID,
1189                 .dev_name = "KSZ8563",
1190                 .num_vlans = 4096,
1191                 .num_alus = 4096,
1192                 .num_statics = 16,
1193                 .cpu_ports = 0x07,      /* can be configured as cpu port */
1194                 .port_cnt = 3,          /* total port count */
1195                 .port_nirqs = 3,
1196                 .num_tx_queues = 4,
1197                 .tc_cbs_supported = true,
1198                 .tc_ets_supported = true,
1199                 .ops = &ksz9477_dev_ops,
1200                 .mib_names = ksz9477_mib_names,
1201                 .mib_cnt = ARRAY_SIZE(ksz9477_mib_names),
1202                 .reg_mib_cnt = MIB_COUNTER_NUM,
1203                 .regs = ksz9477_regs,
1204                 .masks = ksz9477_masks,
1205                 .shifts = ksz9477_shifts,
1206                 .xmii_ctrl0 = ksz9477_xmii_ctrl0,
1207                 .xmii_ctrl1 = ksz8795_xmii_ctrl1, /* Same as ksz8795 */
1208                 .supports_mii = {false, false, true},
1209                 .supports_rmii = {false, false, true},
1210                 .supports_rgmii = {false, false, true},
1211                 .internal_phy = {true, true, false},
1212                 .gbit_capable = {false, false, true},
1213                 .wr_table = &ksz8563_register_set,
1214                 .rd_table = &ksz8563_register_set,
1215         },
1216
1217         [KSZ8795] = {
1218                 .chip_id = KSZ8795_CHIP_ID,
1219                 .dev_name = "KSZ8795",
1220                 .num_vlans = 4096,
1221                 .num_alus = 0,
1222                 .num_statics = 8,
1223                 .cpu_ports = 0x10,      /* can be configured as cpu port */
1224                 .port_cnt = 5,          /* total cpu and user ports */
1225                 .num_tx_queues = 4,
1226                 .ops = &ksz8_dev_ops,
1227                 .ksz87xx_eee_link_erratum = true,
1228                 .mib_names = ksz9477_mib_names,
1229                 .mib_cnt = ARRAY_SIZE(ksz9477_mib_names),
1230                 .reg_mib_cnt = MIB_COUNTER_NUM,
1231                 .regs = ksz8795_regs,
1232                 .masks = ksz8795_masks,
1233                 .shifts = ksz8795_shifts,
1234                 .xmii_ctrl0 = ksz8795_xmii_ctrl0,
1235                 .xmii_ctrl1 = ksz8795_xmii_ctrl1,
1236                 .supports_mii = {false, false, false, false, true},
1237                 .supports_rmii = {false, false, false, false, true},
1238                 .supports_rgmii = {false, false, false, false, true},
1239                 .internal_phy = {true, true, true, true, false},
1240         },
1241
1242         [KSZ8794] = {
1243                 /* WARNING
1244                  * =======
1245                  * KSZ8794 is similar to KSZ8795, except the port map
1246                  * contains a gap between external and CPU ports, the
1247                  * port map is NOT continuous. The per-port register
1248                  * map is shifted accordingly too, i.e. registers at
1249                  * offset 0x40 are NOT used on KSZ8794 and they ARE
1250                  * used on KSZ8795 for external port 3.
1251                  *           external  cpu
1252                  * KSZ8794   0,1,2      4
1253                  * KSZ8795   0,1,2,3    4
1254                  * KSZ8765   0,1,2,3    4
1255                  * port_cnt is configured as 5, even though it is 4
1256                  */
1257                 .chip_id = KSZ8794_CHIP_ID,
1258                 .dev_name = "KSZ8794",
1259                 .num_vlans = 4096,
1260                 .num_alus = 0,
1261                 .num_statics = 8,
1262                 .cpu_ports = 0x10,      /* can be configured as cpu port */
1263                 .port_cnt = 5,          /* total cpu and user ports */
1264                 .num_tx_queues = 4,
1265                 .ops = &ksz8_dev_ops,
1266                 .ksz87xx_eee_link_erratum = true,
1267                 .mib_names = ksz9477_mib_names,
1268                 .mib_cnt = ARRAY_SIZE(ksz9477_mib_names),
1269                 .reg_mib_cnt = MIB_COUNTER_NUM,
1270                 .regs = ksz8795_regs,
1271                 .masks = ksz8795_masks,
1272                 .shifts = ksz8795_shifts,
1273                 .xmii_ctrl0 = ksz8795_xmii_ctrl0,
1274                 .xmii_ctrl1 = ksz8795_xmii_ctrl1,
1275                 .supports_mii = {false, false, false, false, true},
1276                 .supports_rmii = {false, false, false, false, true},
1277                 .supports_rgmii = {false, false, false, false, true},
1278                 .internal_phy = {true, true, true, false, false},
1279         },
1280
1281         [KSZ8765] = {
1282                 .chip_id = KSZ8765_CHIP_ID,
1283                 .dev_name = "KSZ8765",
1284                 .num_vlans = 4096,
1285                 .num_alus = 0,
1286                 .num_statics = 8,
1287                 .cpu_ports = 0x10,      /* can be configured as cpu port */
1288                 .port_cnt = 5,          /* total cpu and user ports */
1289                 .num_tx_queues = 4,
1290                 .ops = &ksz8_dev_ops,
1291                 .ksz87xx_eee_link_erratum = true,
1292                 .mib_names = ksz9477_mib_names,
1293                 .mib_cnt = ARRAY_SIZE(ksz9477_mib_names),
1294                 .reg_mib_cnt = MIB_COUNTER_NUM,
1295                 .regs = ksz8795_regs,
1296                 .masks = ksz8795_masks,
1297                 .shifts = ksz8795_shifts,
1298                 .xmii_ctrl0 = ksz8795_xmii_ctrl0,
1299                 .xmii_ctrl1 = ksz8795_xmii_ctrl1,
1300                 .supports_mii = {false, false, false, false, true},
1301                 .supports_rmii = {false, false, false, false, true},
1302                 .supports_rgmii = {false, false, false, false, true},
1303                 .internal_phy = {true, true, true, true, false},
1304         },
1305
1306         [KSZ8830] = {
1307                 .chip_id = KSZ8830_CHIP_ID,
1308                 .dev_name = "KSZ8863/KSZ8873",
1309                 .num_vlans = 16,
1310                 .num_alus = 0,
1311                 .num_statics = 8,
1312                 .cpu_ports = 0x4,       /* can be configured as cpu port */
1313                 .port_cnt = 3,
1314                 .num_tx_queues = 4,
1315                 .ops = &ksz8_dev_ops,
1316                 .mib_names = ksz88xx_mib_names,
1317                 .mib_cnt = ARRAY_SIZE(ksz88xx_mib_names),
1318                 .reg_mib_cnt = MIB_COUNTER_NUM,
1319                 .regs = ksz8863_regs,
1320                 .masks = ksz8863_masks,
1321                 .shifts = ksz8863_shifts,
1322                 .supports_mii = {false, false, true},
1323                 .supports_rmii = {false, false, true},
1324                 .internal_phy = {true, true, false},
1325                 .wr_table = &ksz8873_register_set,
1326                 .rd_table = &ksz8873_register_set,
1327         },
1328
1329         [KSZ9477] = {
1330                 .chip_id = KSZ9477_CHIP_ID,
1331                 .dev_name = "KSZ9477",
1332                 .num_vlans = 4096,
1333                 .num_alus = 4096,
1334                 .num_statics = 16,
1335                 .cpu_ports = 0x7F,      /* can be configured as cpu port */
1336                 .port_cnt = 7,          /* total physical port count */
1337                 .port_nirqs = 4,
1338                 .num_tx_queues = 4,
1339                 .tc_cbs_supported = true,
1340                 .tc_ets_supported = true,
1341                 .ops = &ksz9477_dev_ops,
1342                 .mib_names = ksz9477_mib_names,
1343                 .mib_cnt = ARRAY_SIZE(ksz9477_mib_names),
1344                 .reg_mib_cnt = MIB_COUNTER_NUM,
1345                 .regs = ksz9477_regs,
1346                 .masks = ksz9477_masks,
1347                 .shifts = ksz9477_shifts,
1348                 .xmii_ctrl0 = ksz9477_xmii_ctrl0,
1349                 .xmii_ctrl1 = ksz9477_xmii_ctrl1,
1350                 .supports_mii   = {false, false, false, false,
1351                                    false, true, false},
1352                 .supports_rmii  = {false, false, false, false,
1353                                    false, true, false},
1354                 .supports_rgmii = {false, false, false, false,
1355                                    false, true, false},
1356                 .internal_phy   = {true, true, true, true,
1357                                    true, false, false},
1358                 .gbit_capable   = {true, true, true, true, true, true, true},
1359                 .wr_table = &ksz9477_register_set,
1360                 .rd_table = &ksz9477_register_set,
1361         },
1362
1363         [KSZ9896] = {
1364                 .chip_id = KSZ9896_CHIP_ID,
1365                 .dev_name = "KSZ9896",
1366                 .num_vlans = 4096,
1367                 .num_alus = 4096,
1368                 .num_statics = 16,
1369                 .cpu_ports = 0x3F,      /* can be configured as cpu port */
1370                 .port_cnt = 6,          /* total physical port count */
1371                 .port_nirqs = 2,
1372                 .num_tx_queues = 4,
1373                 .ops = &ksz9477_dev_ops,
1374                 .mib_names = ksz9477_mib_names,
1375                 .mib_cnt = ARRAY_SIZE(ksz9477_mib_names),
1376                 .reg_mib_cnt = MIB_COUNTER_NUM,
1377                 .regs = ksz9477_regs,
1378                 .masks = ksz9477_masks,
1379                 .shifts = ksz9477_shifts,
1380                 .xmii_ctrl0 = ksz9477_xmii_ctrl0,
1381                 .xmii_ctrl1 = ksz9477_xmii_ctrl1,
1382                 .supports_mii   = {false, false, false, false,
1383                                    false, true},
1384                 .supports_rmii  = {false, false, false, false,
1385                                    false, true},
1386                 .supports_rgmii = {false, false, false, false,
1387                                    false, true},
1388                 .internal_phy   = {true, true, true, true,
1389                                    true, false},
1390                 .gbit_capable   = {true, true, true, true, true, true},
1391                 .wr_table = &ksz9896_register_set,
1392                 .rd_table = &ksz9896_register_set,
1393         },
1394
1395         [KSZ9897] = {
1396                 .chip_id = KSZ9897_CHIP_ID,
1397                 .dev_name = "KSZ9897",
1398                 .num_vlans = 4096,
1399                 .num_alus = 4096,
1400                 .num_statics = 16,
1401                 .cpu_ports = 0x7F,      /* can be configured as cpu port */
1402                 .port_cnt = 7,          /* total physical port count */
1403                 .port_nirqs = 2,
1404                 .num_tx_queues = 4,
1405                 .ops = &ksz9477_dev_ops,
1406                 .mib_names = ksz9477_mib_names,
1407                 .mib_cnt = ARRAY_SIZE(ksz9477_mib_names),
1408                 .reg_mib_cnt = MIB_COUNTER_NUM,
1409                 .regs = ksz9477_regs,
1410                 .masks = ksz9477_masks,
1411                 .shifts = ksz9477_shifts,
1412                 .xmii_ctrl0 = ksz9477_xmii_ctrl0,
1413                 .xmii_ctrl1 = ksz9477_xmii_ctrl1,
1414                 .supports_mii   = {false, false, false, false,
1415                                    false, true, true},
1416                 .supports_rmii  = {false, false, false, false,
1417                                    false, true, true},
1418                 .supports_rgmii = {false, false, false, false,
1419                                    false, true, true},
1420                 .internal_phy   = {true, true, true, true,
1421                                    true, false, false},
1422                 .gbit_capable   = {true, true, true, true, true, true, true},
1423         },
1424
1425         [KSZ9893] = {
1426                 .chip_id = KSZ9893_CHIP_ID,
1427                 .dev_name = "KSZ9893",
1428                 .num_vlans = 4096,
1429                 .num_alus = 4096,
1430                 .num_statics = 16,
1431                 .cpu_ports = 0x07,      /* can be configured as cpu port */
1432                 .port_cnt = 3,          /* total port count */
1433                 .port_nirqs = 2,
1434                 .num_tx_queues = 4,
1435                 .ops = &ksz9477_dev_ops,
1436                 .mib_names = ksz9477_mib_names,
1437                 .mib_cnt = ARRAY_SIZE(ksz9477_mib_names),
1438                 .reg_mib_cnt = MIB_COUNTER_NUM,
1439                 .regs = ksz9477_regs,
1440                 .masks = ksz9477_masks,
1441                 .shifts = ksz9477_shifts,
1442                 .xmii_ctrl0 = ksz9477_xmii_ctrl0,
1443                 .xmii_ctrl1 = ksz8795_xmii_ctrl1, /* Same as ksz8795 */
1444                 .supports_mii = {false, false, true},
1445                 .supports_rmii = {false, false, true},
1446                 .supports_rgmii = {false, false, true},
1447                 .internal_phy = {true, true, false},
1448                 .gbit_capable = {true, true, true},
1449         },
1450
1451         [KSZ9563] = {
1452                 .chip_id = KSZ9563_CHIP_ID,
1453                 .dev_name = "KSZ9563",
1454                 .num_vlans = 4096,
1455                 .num_alus = 4096,
1456                 .num_statics = 16,
1457                 .cpu_ports = 0x07,      /* can be configured as cpu port */
1458                 .port_cnt = 3,          /* total port count */
1459                 .port_nirqs = 3,
1460                 .num_tx_queues = 4,
1461                 .tc_cbs_supported = true,
1462                 .tc_ets_supported = true,
1463                 .ops = &ksz9477_dev_ops,
1464                 .mib_names = ksz9477_mib_names,
1465                 .mib_cnt = ARRAY_SIZE(ksz9477_mib_names),
1466                 .reg_mib_cnt = MIB_COUNTER_NUM,
1467                 .regs = ksz9477_regs,
1468                 .masks = ksz9477_masks,
1469                 .shifts = ksz9477_shifts,
1470                 .xmii_ctrl0 = ksz9477_xmii_ctrl0,
1471                 .xmii_ctrl1 = ksz8795_xmii_ctrl1, /* Same as ksz8795 */
1472                 .supports_mii = {false, false, true},
1473                 .supports_rmii = {false, false, true},
1474                 .supports_rgmii = {false, false, true},
1475                 .internal_phy = {true, true, false},
1476                 .gbit_capable = {true, true, true},
1477         },
1478
1479         [KSZ9567] = {
1480                 .chip_id = KSZ9567_CHIP_ID,
1481                 .dev_name = "KSZ9567",
1482                 .num_vlans = 4096,
1483                 .num_alus = 4096,
1484                 .num_statics = 16,
1485                 .cpu_ports = 0x7F,      /* can be configured as cpu port */
1486                 .port_cnt = 7,          /* total physical port count */
1487                 .port_nirqs = 3,
1488                 .num_tx_queues = 4,
1489                 .tc_cbs_supported = true,
1490                 .tc_ets_supported = true,
1491                 .ops = &ksz9477_dev_ops,
1492                 .mib_names = ksz9477_mib_names,
1493                 .mib_cnt = ARRAY_SIZE(ksz9477_mib_names),
1494                 .reg_mib_cnt = MIB_COUNTER_NUM,
1495                 .regs = ksz9477_regs,
1496                 .masks = ksz9477_masks,
1497                 .shifts = ksz9477_shifts,
1498                 .xmii_ctrl0 = ksz9477_xmii_ctrl0,
1499                 .xmii_ctrl1 = ksz9477_xmii_ctrl1,
1500                 .supports_mii   = {false, false, false, false,
1501                                    false, true, true},
1502                 .supports_rmii  = {false, false, false, false,
1503                                    false, true, true},
1504                 .supports_rgmii = {false, false, false, false,
1505                                    false, true, true},
1506                 .internal_phy   = {true, true, true, true,
1507                                    true, false, false},
1508                 .gbit_capable   = {true, true, true, true, true, true, true},
1509         },
1510
1511         [LAN9370] = {
1512                 .chip_id = LAN9370_CHIP_ID,
1513                 .dev_name = "LAN9370",
1514                 .num_vlans = 4096,
1515                 .num_alus = 1024,
1516                 .num_statics = 256,
1517                 .cpu_ports = 0x10,      /* can be configured as cpu port */
1518                 .port_cnt = 5,          /* total physical port count */
1519                 .port_nirqs = 6,
1520                 .num_tx_queues = 8,
1521                 .tc_cbs_supported = true,
1522                 .tc_ets_supported = true,
1523                 .ops = &lan937x_dev_ops,
1524                 .mib_names = ksz9477_mib_names,
1525                 .mib_cnt = ARRAY_SIZE(ksz9477_mib_names),
1526                 .reg_mib_cnt = MIB_COUNTER_NUM,
1527                 .regs = ksz9477_regs,
1528                 .masks = lan937x_masks,
1529                 .shifts = lan937x_shifts,
1530                 .xmii_ctrl0 = ksz9477_xmii_ctrl0,
1531                 .xmii_ctrl1 = ksz9477_xmii_ctrl1,
1532                 .supports_mii = {false, false, false, false, true},
1533                 .supports_rmii = {false, false, false, false, true},
1534                 .supports_rgmii = {false, false, false, false, true},
1535                 .internal_phy = {true, true, true, true, false},
1536         },
1537
1538         [LAN9371] = {
1539                 .chip_id = LAN9371_CHIP_ID,
1540                 .dev_name = "LAN9371",
1541                 .num_vlans = 4096,
1542                 .num_alus = 1024,
1543                 .num_statics = 256,
1544                 .cpu_ports = 0x30,      /* can be configured as cpu port */
1545                 .port_cnt = 6,          /* total physical port count */
1546                 .port_nirqs = 6,
1547                 .num_tx_queues = 8,
1548                 .tc_cbs_supported = true,
1549                 .tc_ets_supported = true,
1550                 .ops = &lan937x_dev_ops,
1551                 .mib_names = ksz9477_mib_names,
1552                 .mib_cnt = ARRAY_SIZE(ksz9477_mib_names),
1553                 .reg_mib_cnt = MIB_COUNTER_NUM,
1554                 .regs = ksz9477_regs,
1555                 .masks = lan937x_masks,
1556                 .shifts = lan937x_shifts,
1557                 .xmii_ctrl0 = ksz9477_xmii_ctrl0,
1558                 .xmii_ctrl1 = ksz9477_xmii_ctrl1,
1559                 .supports_mii = {false, false, false, false, true, true},
1560                 .supports_rmii = {false, false, false, false, true, true},
1561                 .supports_rgmii = {false, false, false, false, true, true},
1562                 .internal_phy = {true, true, true, true, false, false},
1563         },
1564
1565         [LAN9372] = {
1566                 .chip_id = LAN9372_CHIP_ID,
1567                 .dev_name = "LAN9372",
1568                 .num_vlans = 4096,
1569                 .num_alus = 1024,
1570                 .num_statics = 256,
1571                 .cpu_ports = 0x30,      /* can be configured as cpu port */
1572                 .port_cnt = 8,          /* total physical port count */
1573                 .port_nirqs = 6,
1574                 .num_tx_queues = 8,
1575                 .tc_cbs_supported = true,
1576                 .tc_ets_supported = true,
1577                 .ops = &lan937x_dev_ops,
1578                 .mib_names = ksz9477_mib_names,
1579                 .mib_cnt = ARRAY_SIZE(ksz9477_mib_names),
1580                 .reg_mib_cnt = MIB_COUNTER_NUM,
1581                 .regs = ksz9477_regs,
1582                 .masks = lan937x_masks,
1583                 .shifts = lan937x_shifts,
1584                 .xmii_ctrl0 = ksz9477_xmii_ctrl0,
1585                 .xmii_ctrl1 = ksz9477_xmii_ctrl1,
1586                 .supports_mii   = {false, false, false, false,
1587                                    true, true, false, false},
1588                 .supports_rmii  = {false, false, false, false,
1589                                    true, true, false, false},
1590                 .supports_rgmii = {false, false, false, false,
1591                                    true, true, false, false},
1592                 .internal_phy   = {true, true, true, true,
1593                                    false, false, true, true},
1594         },
1595
1596         [LAN9373] = {
1597                 .chip_id = LAN9373_CHIP_ID,
1598                 .dev_name = "LAN9373",
1599                 .num_vlans = 4096,
1600                 .num_alus = 1024,
1601                 .num_statics = 256,
1602                 .cpu_ports = 0x38,      /* can be configured as cpu port */
1603                 .port_cnt = 5,          /* total physical port count */
1604                 .port_nirqs = 6,
1605                 .num_tx_queues = 8,
1606                 .tc_cbs_supported = true,
1607                 .tc_ets_supported = true,
1608                 .ops = &lan937x_dev_ops,
1609                 .mib_names = ksz9477_mib_names,
1610                 .mib_cnt = ARRAY_SIZE(ksz9477_mib_names),
1611                 .reg_mib_cnt = MIB_COUNTER_NUM,
1612                 .regs = ksz9477_regs,
1613                 .masks = lan937x_masks,
1614                 .shifts = lan937x_shifts,
1615                 .xmii_ctrl0 = ksz9477_xmii_ctrl0,
1616                 .xmii_ctrl1 = ksz9477_xmii_ctrl1,
1617                 .supports_mii   = {false, false, false, false,
1618                                    true, true, false, false},
1619                 .supports_rmii  = {false, false, false, false,
1620                                    true, true, false, false},
1621                 .supports_rgmii = {false, false, false, false,
1622                                    true, true, false, false},
1623                 .internal_phy   = {true, true, true, false,
1624                                    false, false, true, true},
1625         },
1626
1627         [LAN9374] = {
1628                 .chip_id = LAN9374_CHIP_ID,
1629                 .dev_name = "LAN9374",
1630                 .num_vlans = 4096,
1631                 .num_alus = 1024,
1632                 .num_statics = 256,
1633                 .cpu_ports = 0x30,      /* can be configured as cpu port */
1634                 .port_cnt = 8,          /* total physical port count */
1635                 .port_nirqs = 6,
1636                 .num_tx_queues = 8,
1637                 .tc_cbs_supported = true,
1638                 .tc_ets_supported = true,
1639                 .ops = &lan937x_dev_ops,
1640                 .mib_names = ksz9477_mib_names,
1641                 .mib_cnt = ARRAY_SIZE(ksz9477_mib_names),
1642                 .reg_mib_cnt = MIB_COUNTER_NUM,
1643                 .regs = ksz9477_regs,
1644                 .masks = lan937x_masks,
1645                 .shifts = lan937x_shifts,
1646                 .xmii_ctrl0 = ksz9477_xmii_ctrl0,
1647                 .xmii_ctrl1 = ksz9477_xmii_ctrl1,
1648                 .supports_mii   = {false, false, false, false,
1649                                    true, true, false, false},
1650                 .supports_rmii  = {false, false, false, false,
1651                                    true, true, false, false},
1652                 .supports_rgmii = {false, false, false, false,
1653                                    true, true, false, false},
1654                 .internal_phy   = {true, true, true, true,
1655                                    false, false, true, true},
1656         },
1657 };
1658 EXPORT_SYMBOL_GPL(ksz_switch_chips);
1659
1660 static const struct ksz_chip_data *ksz_lookup_info(unsigned int prod_num)
1661 {
1662         int i;
1663
1664         for (i = 0; i < ARRAY_SIZE(ksz_switch_chips); i++) {
1665                 const struct ksz_chip_data *chip = &ksz_switch_chips[i];
1666
1667                 if (chip->chip_id == prod_num)
1668                         return chip;
1669         }
1670
1671         return NULL;
1672 }
1673
1674 static int ksz_check_device_id(struct ksz_device *dev)
1675 {
1676         const struct ksz_chip_data *expected_chip_data;
1677         u32 expected_chip_id;
1678
1679         if (dev->pdata) {
1680                 expected_chip_id = dev->pdata->chip_id;
1681                 expected_chip_data = ksz_lookup_info(expected_chip_id);
1682                 if (WARN_ON(!expected_chip_data))
1683                         return -ENODEV;
1684         } else {
1685                 expected_chip_data = of_device_get_match_data(dev->dev);
1686                 expected_chip_id = expected_chip_data->chip_id;
1687         }
1688
1689         if (expected_chip_id != dev->chip_id) {
1690                 dev_err(dev->dev,
1691                         "Device tree specifies chip %s but found %s, please fix it!\n",
1692                         expected_chip_data->dev_name, dev->info->dev_name);
1693                 return -ENODEV;
1694         }
1695
1696         return 0;
1697 }
1698
1699 static void ksz_phylink_get_caps(struct dsa_switch *ds, int port,
1700                                  struct phylink_config *config)
1701 {
1702         struct ksz_device *dev = ds->priv;
1703
1704         if (dev->info->supports_mii[port])
1705                 __set_bit(PHY_INTERFACE_MODE_MII, config->supported_interfaces);
1706
1707         if (dev->info->supports_rmii[port])
1708                 __set_bit(PHY_INTERFACE_MODE_RMII,
1709                           config->supported_interfaces);
1710
1711         if (dev->info->supports_rgmii[port])
1712                 phy_interface_set_rgmii(config->supported_interfaces);
1713
1714         if (dev->info->internal_phy[port]) {
1715                 __set_bit(PHY_INTERFACE_MODE_INTERNAL,
1716                           config->supported_interfaces);
1717                 /* Compatibility for phylib's default interface type when the
1718                  * phy-mode property is absent
1719                  */
1720                 __set_bit(PHY_INTERFACE_MODE_GMII,
1721                           config->supported_interfaces);
1722         }
1723
1724         if (dev->dev_ops->get_caps)
1725                 dev->dev_ops->get_caps(dev, port, config);
1726 }
1727
1728 void ksz_r_mib_stats64(struct ksz_device *dev, int port)
1729 {
1730         struct ethtool_pause_stats *pstats;
1731         struct rtnl_link_stats64 *stats;
1732         struct ksz_stats_raw *raw;
1733         struct ksz_port_mib *mib;
1734
1735         mib = &dev->ports[port].mib;
1736         stats = &mib->stats64;
1737         pstats = &mib->pause_stats;
1738         raw = (struct ksz_stats_raw *)mib->counters;
1739
1740         spin_lock(&mib->stats64_lock);
1741
1742         stats->rx_packets = raw->rx_bcast + raw->rx_mcast + raw->rx_ucast +
1743                 raw->rx_pause;
1744         stats->tx_packets = raw->tx_bcast + raw->tx_mcast + raw->tx_ucast +
1745                 raw->tx_pause;
1746
1747         /* HW counters are counting bytes + FCS which is not acceptable
1748          * for rtnl_link_stats64 interface
1749          */
1750         stats->rx_bytes = raw->rx_total - stats->rx_packets * ETH_FCS_LEN;
1751         stats->tx_bytes = raw->tx_total - stats->tx_packets * ETH_FCS_LEN;
1752
1753         stats->rx_length_errors = raw->rx_undersize + raw->rx_fragments +
1754                 raw->rx_oversize;
1755
1756         stats->rx_crc_errors = raw->rx_crc_err;
1757         stats->rx_frame_errors = raw->rx_align_err;
1758         stats->rx_dropped = raw->rx_discards;
1759         stats->rx_errors = stats->rx_length_errors + stats->rx_crc_errors +
1760                 stats->rx_frame_errors  + stats->rx_dropped;
1761
1762         stats->tx_window_errors = raw->tx_late_col;
1763         stats->tx_fifo_errors = raw->tx_discards;
1764         stats->tx_aborted_errors = raw->tx_exc_col;
1765         stats->tx_errors = stats->tx_window_errors + stats->tx_fifo_errors +
1766                 stats->tx_aborted_errors;
1767
1768         stats->multicast = raw->rx_mcast;
1769         stats->collisions = raw->tx_total_col;
1770
1771         pstats->tx_pause_frames = raw->tx_pause;
1772         pstats->rx_pause_frames = raw->rx_pause;
1773
1774         spin_unlock(&mib->stats64_lock);
1775 }
1776
1777 void ksz88xx_r_mib_stats64(struct ksz_device *dev, int port)
1778 {
1779         struct ethtool_pause_stats *pstats;
1780         struct rtnl_link_stats64 *stats;
1781         struct ksz88xx_stats_raw *raw;
1782         struct ksz_port_mib *mib;
1783
1784         mib = &dev->ports[port].mib;
1785         stats = &mib->stats64;
1786         pstats = &mib->pause_stats;
1787         raw = (struct ksz88xx_stats_raw *)mib->counters;
1788
1789         spin_lock(&mib->stats64_lock);
1790
1791         stats->rx_packets = raw->rx_bcast + raw->rx_mcast + raw->rx_ucast +
1792                 raw->rx_pause;
1793         stats->tx_packets = raw->tx_bcast + raw->tx_mcast + raw->tx_ucast +
1794                 raw->tx_pause;
1795
1796         /* HW counters are counting bytes + FCS which is not acceptable
1797          * for rtnl_link_stats64 interface
1798          */
1799         stats->rx_bytes = raw->rx + raw->rx_hi - stats->rx_packets * ETH_FCS_LEN;
1800         stats->tx_bytes = raw->tx + raw->tx_hi - stats->tx_packets * ETH_FCS_LEN;
1801
1802         stats->rx_length_errors = raw->rx_undersize + raw->rx_fragments +
1803                 raw->rx_oversize;
1804
1805         stats->rx_crc_errors = raw->rx_crc_err;
1806         stats->rx_frame_errors = raw->rx_align_err;
1807         stats->rx_dropped = raw->rx_discards;
1808         stats->rx_errors = stats->rx_length_errors + stats->rx_crc_errors +
1809                 stats->rx_frame_errors  + stats->rx_dropped;
1810
1811         stats->tx_window_errors = raw->tx_late_col;
1812         stats->tx_fifo_errors = raw->tx_discards;
1813         stats->tx_aborted_errors = raw->tx_exc_col;
1814         stats->tx_errors = stats->tx_window_errors + stats->tx_fifo_errors +
1815                 stats->tx_aborted_errors;
1816
1817         stats->multicast = raw->rx_mcast;
1818         stats->collisions = raw->tx_total_col;
1819
1820         pstats->tx_pause_frames = raw->tx_pause;
1821         pstats->rx_pause_frames = raw->rx_pause;
1822
1823         spin_unlock(&mib->stats64_lock);
1824 }
1825
1826 static void ksz_get_stats64(struct dsa_switch *ds, int port,
1827                             struct rtnl_link_stats64 *s)
1828 {
1829         struct ksz_device *dev = ds->priv;
1830         struct ksz_port_mib *mib;
1831
1832         mib = &dev->ports[port].mib;
1833
1834         spin_lock(&mib->stats64_lock);
1835         memcpy(s, &mib->stats64, sizeof(*s));
1836         spin_unlock(&mib->stats64_lock);
1837 }
1838
1839 static void ksz_get_pause_stats(struct dsa_switch *ds, int port,
1840                                 struct ethtool_pause_stats *pause_stats)
1841 {
1842         struct ksz_device *dev = ds->priv;
1843         struct ksz_port_mib *mib;
1844
1845         mib = &dev->ports[port].mib;
1846
1847         spin_lock(&mib->stats64_lock);
1848         memcpy(pause_stats, &mib->pause_stats, sizeof(*pause_stats));
1849         spin_unlock(&mib->stats64_lock);
1850 }
1851
1852 static void ksz_get_strings(struct dsa_switch *ds, int port,
1853                             u32 stringset, uint8_t *buf)
1854 {
1855         struct ksz_device *dev = ds->priv;
1856         int i;
1857
1858         if (stringset != ETH_SS_STATS)
1859                 return;
1860
1861         for (i = 0; i < dev->info->mib_cnt; i++) {
1862                 memcpy(buf + i * ETH_GSTRING_LEN,
1863                        dev->info->mib_names[i].string, ETH_GSTRING_LEN);
1864         }
1865 }
1866
1867 static void ksz_update_port_member(struct ksz_device *dev, int port)
1868 {
1869         struct ksz_port *p = &dev->ports[port];
1870         struct dsa_switch *ds = dev->ds;
1871         u8 port_member = 0, cpu_port;
1872         const struct dsa_port *dp;
1873         int i, j;
1874
1875         if (!dsa_is_user_port(ds, port))
1876                 return;
1877
1878         dp = dsa_to_port(ds, port);
1879         cpu_port = BIT(dsa_upstream_port(ds, port));
1880
1881         for (i = 0; i < ds->num_ports; i++) {
1882                 const struct dsa_port *other_dp = dsa_to_port(ds, i);
1883                 struct ksz_port *other_p = &dev->ports[i];
1884                 u8 val = 0;
1885
1886                 if (!dsa_is_user_port(ds, i))
1887                         continue;
1888                 if (port == i)
1889                         continue;
1890                 if (!dsa_port_bridge_same(dp, other_dp))
1891                         continue;
1892                 if (other_p->stp_state != BR_STATE_FORWARDING)
1893                         continue;
1894
1895                 if (p->stp_state == BR_STATE_FORWARDING) {
1896                         val |= BIT(port);
1897                         port_member |= BIT(i);
1898                 }
1899
1900                 /* Retain port [i]'s relationship to other ports than [port] */
1901                 for (j = 0; j < ds->num_ports; j++) {
1902                         const struct dsa_port *third_dp;
1903                         struct ksz_port *third_p;
1904
1905                         if (j == i)
1906                                 continue;
1907                         if (j == port)
1908                                 continue;
1909                         if (!dsa_is_user_port(ds, j))
1910                                 continue;
1911                         third_p = &dev->ports[j];
1912                         if (third_p->stp_state != BR_STATE_FORWARDING)
1913                                 continue;
1914                         third_dp = dsa_to_port(ds, j);
1915                         if (dsa_port_bridge_same(other_dp, third_dp))
1916                                 val |= BIT(j);
1917                 }
1918
1919                 dev->dev_ops->cfg_port_member(dev, i, val | cpu_port);
1920         }
1921
1922         dev->dev_ops->cfg_port_member(dev, port, port_member | cpu_port);
1923 }
1924
1925 static int ksz_sw_mdio_read(struct mii_bus *bus, int addr, int regnum)
1926 {
1927         struct ksz_device *dev = bus->priv;
1928         u16 val;
1929         int ret;
1930
1931         ret = dev->dev_ops->r_phy(dev, addr, regnum, &val);
1932         if (ret < 0)
1933                 return ret;
1934
1935         return val;
1936 }
1937
1938 static int ksz_sw_mdio_write(struct mii_bus *bus, int addr, int regnum,
1939                              u16 val)
1940 {
1941         struct ksz_device *dev = bus->priv;
1942
1943         return dev->dev_ops->w_phy(dev, addr, regnum, val);
1944 }
1945
1946 static int ksz_irq_phy_setup(struct ksz_device *dev)
1947 {
1948         struct dsa_switch *ds = dev->ds;
1949         int phy;
1950         int irq;
1951         int ret;
1952
1953         for (phy = 0; phy < KSZ_MAX_NUM_PORTS; phy++) {
1954                 if (BIT(phy) & ds->phys_mii_mask) {
1955                         irq = irq_find_mapping(dev->ports[phy].pirq.domain,
1956                                                PORT_SRC_PHY_INT);
1957                         if (irq < 0) {
1958                                 ret = irq;
1959                                 goto out;
1960                         }
1961                         ds->user_mii_bus->irq[phy] = irq;
1962                 }
1963         }
1964         return 0;
1965 out:
1966         while (phy--)
1967                 if (BIT(phy) & ds->phys_mii_mask)
1968                         irq_dispose_mapping(ds->user_mii_bus->irq[phy]);
1969
1970         return ret;
1971 }
1972
1973 static void ksz_irq_phy_free(struct ksz_device *dev)
1974 {
1975         struct dsa_switch *ds = dev->ds;
1976         int phy;
1977
1978         for (phy = 0; phy < KSZ_MAX_NUM_PORTS; phy++)
1979                 if (BIT(phy) & ds->phys_mii_mask)
1980                         irq_dispose_mapping(ds->user_mii_bus->irq[phy]);
1981 }
1982
1983 static int ksz_mdio_register(struct ksz_device *dev)
1984 {
1985         struct dsa_switch *ds = dev->ds;
1986         struct device_node *mdio_np;
1987         struct mii_bus *bus;
1988         int ret;
1989
1990         mdio_np = of_get_child_by_name(dev->dev->of_node, "mdio");
1991         if (!mdio_np)
1992                 return 0;
1993
1994         bus = devm_mdiobus_alloc(ds->dev);
1995         if (!bus) {
1996                 of_node_put(mdio_np);
1997                 return -ENOMEM;
1998         }
1999
2000         bus->priv = dev;
2001         bus->read = ksz_sw_mdio_read;
2002         bus->write = ksz_sw_mdio_write;
2003         bus->name = "ksz user smi";
2004         snprintf(bus->id, MII_BUS_ID_SIZE, "SMI-%d", ds->index);
2005         bus->parent = ds->dev;
2006         bus->phy_mask = ~ds->phys_mii_mask;
2007
2008         ds->user_mii_bus = bus;
2009
2010         if (dev->irq > 0) {
2011                 ret = ksz_irq_phy_setup(dev);
2012                 if (ret) {
2013                         of_node_put(mdio_np);
2014                         return ret;
2015                 }
2016         }
2017
2018         ret = devm_of_mdiobus_register(ds->dev, bus, mdio_np);
2019         if (ret) {
2020                 dev_err(ds->dev, "unable to register MDIO bus %s\n",
2021                         bus->id);
2022                 if (dev->irq > 0)
2023                         ksz_irq_phy_free(dev);
2024         }
2025
2026         of_node_put(mdio_np);
2027
2028         return ret;
2029 }
2030
2031 static void ksz_irq_mask(struct irq_data *d)
2032 {
2033         struct ksz_irq *kirq = irq_data_get_irq_chip_data(d);
2034
2035         kirq->masked |= BIT(d->hwirq);
2036 }
2037
2038 static void ksz_irq_unmask(struct irq_data *d)
2039 {
2040         struct ksz_irq *kirq = irq_data_get_irq_chip_data(d);
2041
2042         kirq->masked &= ~BIT(d->hwirq);
2043 }
2044
2045 static void ksz_irq_bus_lock(struct irq_data *d)
2046 {
2047         struct ksz_irq *kirq  = irq_data_get_irq_chip_data(d);
2048
2049         mutex_lock(&kirq->dev->lock_irq);
2050 }
2051
2052 static void ksz_irq_bus_sync_unlock(struct irq_data *d)
2053 {
2054         struct ksz_irq *kirq  = irq_data_get_irq_chip_data(d);
2055         struct ksz_device *dev = kirq->dev;
2056         int ret;
2057
2058         ret = ksz_write32(dev, kirq->reg_mask, kirq->masked);
2059         if (ret)
2060                 dev_err(dev->dev, "failed to change IRQ mask\n");
2061
2062         mutex_unlock(&dev->lock_irq);
2063 }
2064
2065 static const struct irq_chip ksz_irq_chip = {
2066         .name                   = "ksz-irq",
2067         .irq_mask               = ksz_irq_mask,
2068         .irq_unmask             = ksz_irq_unmask,
2069         .irq_bus_lock           = ksz_irq_bus_lock,
2070         .irq_bus_sync_unlock    = ksz_irq_bus_sync_unlock,
2071 };
2072
2073 static int ksz_irq_domain_map(struct irq_domain *d,
2074                               unsigned int irq, irq_hw_number_t hwirq)
2075 {
2076         irq_set_chip_data(irq, d->host_data);
2077         irq_set_chip_and_handler(irq, &ksz_irq_chip, handle_level_irq);
2078         irq_set_noprobe(irq);
2079
2080         return 0;
2081 }
2082
2083 static const struct irq_domain_ops ksz_irq_domain_ops = {
2084         .map    = ksz_irq_domain_map,
2085         .xlate  = irq_domain_xlate_twocell,
2086 };
2087
2088 static void ksz_irq_free(struct ksz_irq *kirq)
2089 {
2090         int irq, virq;
2091
2092         free_irq(kirq->irq_num, kirq);
2093
2094         for (irq = 0; irq < kirq->nirqs; irq++) {
2095                 virq = irq_find_mapping(kirq->domain, irq);
2096                 irq_dispose_mapping(virq);
2097         }
2098
2099         irq_domain_remove(kirq->domain);
2100 }
2101
2102 static irqreturn_t ksz_irq_thread_fn(int irq, void *dev_id)
2103 {
2104         struct ksz_irq *kirq = dev_id;
2105         unsigned int nhandled = 0;
2106         struct ksz_device *dev;
2107         unsigned int sub_irq;
2108         u8 data;
2109         int ret;
2110         u8 n;
2111
2112         dev = kirq->dev;
2113
2114         /* Read interrupt status register */
2115         ret = ksz_read8(dev, kirq->reg_status, &data);
2116         if (ret)
2117                 goto out;
2118
2119         for (n = 0; n < kirq->nirqs; ++n) {
2120                 if (data & BIT(n)) {
2121                         sub_irq = irq_find_mapping(kirq->domain, n);
2122                         handle_nested_irq(sub_irq);
2123                         ++nhandled;
2124                 }
2125         }
2126 out:
2127         return (nhandled > 0 ? IRQ_HANDLED : IRQ_NONE);
2128 }
2129
2130 static int ksz_irq_common_setup(struct ksz_device *dev, struct ksz_irq *kirq)
2131 {
2132         int ret, n;
2133
2134         kirq->dev = dev;
2135         kirq->masked = ~0;
2136
2137         kirq->domain = irq_domain_add_simple(dev->dev->of_node, kirq->nirqs, 0,
2138                                              &ksz_irq_domain_ops, kirq);
2139         if (!kirq->domain)
2140                 return -ENOMEM;
2141
2142         for (n = 0; n < kirq->nirqs; n++)
2143                 irq_create_mapping(kirq->domain, n);
2144
2145         ret = request_threaded_irq(kirq->irq_num, NULL, ksz_irq_thread_fn,
2146                                    IRQF_ONESHOT, kirq->name, kirq);
2147         if (ret)
2148                 goto out;
2149
2150         return 0;
2151
2152 out:
2153         ksz_irq_free(kirq);
2154
2155         return ret;
2156 }
2157
2158 static int ksz_girq_setup(struct ksz_device *dev)
2159 {
2160         struct ksz_irq *girq = &dev->girq;
2161
2162         girq->nirqs = dev->info->port_cnt;
2163         girq->reg_mask = REG_SW_PORT_INT_MASK__1;
2164         girq->reg_status = REG_SW_PORT_INT_STATUS__1;
2165         snprintf(girq->name, sizeof(girq->name), "global_port_irq");
2166
2167         girq->irq_num = dev->irq;
2168
2169         return ksz_irq_common_setup(dev, girq);
2170 }
2171
2172 static int ksz_pirq_setup(struct ksz_device *dev, u8 p)
2173 {
2174         struct ksz_irq *pirq = &dev->ports[p].pirq;
2175
2176         pirq->nirqs = dev->info->port_nirqs;
2177         pirq->reg_mask = dev->dev_ops->get_port_addr(p, REG_PORT_INT_MASK);
2178         pirq->reg_status = dev->dev_ops->get_port_addr(p, REG_PORT_INT_STATUS);
2179         snprintf(pirq->name, sizeof(pirq->name), "port_irq-%d", p);
2180
2181         pirq->irq_num = irq_find_mapping(dev->girq.domain, p);
2182         if (pirq->irq_num < 0)
2183                 return pirq->irq_num;
2184
2185         return ksz_irq_common_setup(dev, pirq);
2186 }
2187
2188 static int ksz_setup(struct dsa_switch *ds)
2189 {
2190         struct ksz_device *dev = ds->priv;
2191         struct dsa_port *dp;
2192         struct ksz_port *p;
2193         const u16 *regs;
2194         int ret;
2195
2196         regs = dev->info->regs;
2197
2198         dev->vlan_cache = devm_kcalloc(dev->dev, sizeof(struct vlan_table),
2199                                        dev->info->num_vlans, GFP_KERNEL);
2200         if (!dev->vlan_cache)
2201                 return -ENOMEM;
2202
2203         ret = dev->dev_ops->reset(dev);
2204         if (ret) {
2205                 dev_err(ds->dev, "failed to reset switch\n");
2206                 return ret;
2207         }
2208
2209         /* set broadcast storm protection 10% rate */
2210         regmap_update_bits(ksz_regmap_16(dev), regs[S_BROADCAST_CTRL],
2211                            BROADCAST_STORM_RATE,
2212                            (BROADCAST_STORM_VALUE *
2213                            BROADCAST_STORM_PROT_RATE) / 100);
2214
2215         dev->dev_ops->config_cpu_port(ds);
2216
2217         dev->dev_ops->enable_stp_addr(dev);
2218
2219         ds->num_tx_queues = dev->info->num_tx_queues;
2220
2221         regmap_update_bits(ksz_regmap_8(dev), regs[S_MULTICAST_CTRL],
2222                            MULTICAST_STORM_DISABLE, MULTICAST_STORM_DISABLE);
2223
2224         ksz_init_mib_timer(dev);
2225
2226         ds->configure_vlan_while_not_filtering = false;
2227
2228         if (dev->dev_ops->setup) {
2229                 ret = dev->dev_ops->setup(ds);
2230                 if (ret)
2231                         return ret;
2232         }
2233
2234         /* Start with learning disabled on standalone user ports, and enabled
2235          * on the CPU port. In lack of other finer mechanisms, learning on the
2236          * CPU port will avoid flooding bridge local addresses on the network
2237          * in some cases.
2238          */
2239         p = &dev->ports[dev->cpu_port];
2240         p->learning = true;
2241
2242         if (dev->irq > 0) {
2243                 ret = ksz_girq_setup(dev);
2244                 if (ret)
2245                         return ret;
2246
2247                 dsa_switch_for_each_user_port(dp, dev->ds) {
2248                         ret = ksz_pirq_setup(dev, dp->index);
2249                         if (ret)
2250                                 goto out_girq;
2251
2252                         ret = ksz_ptp_irq_setup(ds, dp->index);
2253                         if (ret)
2254                                 goto out_pirq;
2255                 }
2256         }
2257
2258         ret = ksz_ptp_clock_register(ds);
2259         if (ret) {
2260                 dev_err(dev->dev, "Failed to register PTP clock: %d\n", ret);
2261                 goto out_ptpirq;
2262         }
2263
2264         ret = ksz_mdio_register(dev);
2265         if (ret < 0) {
2266                 dev_err(dev->dev, "failed to register the mdio");
2267                 goto out_ptp_clock_unregister;
2268         }
2269
2270         /* start switch */
2271         regmap_update_bits(ksz_regmap_8(dev), regs[S_START_CTRL],
2272                            SW_START, SW_START);
2273
2274         return 0;
2275
2276 out_ptp_clock_unregister:
2277         ksz_ptp_clock_unregister(ds);
2278 out_ptpirq:
2279         if (dev->irq > 0)
2280                 dsa_switch_for_each_user_port(dp, dev->ds)
2281                         ksz_ptp_irq_free(ds, dp->index);
2282 out_pirq:
2283         if (dev->irq > 0)
2284                 dsa_switch_for_each_user_port(dp, dev->ds)
2285                         ksz_irq_free(&dev->ports[dp->index].pirq);
2286 out_girq:
2287         if (dev->irq > 0)
2288                 ksz_irq_free(&dev->girq);
2289
2290         return ret;
2291 }
2292
2293 static void ksz_teardown(struct dsa_switch *ds)
2294 {
2295         struct ksz_device *dev = ds->priv;
2296         struct dsa_port *dp;
2297
2298         ksz_ptp_clock_unregister(ds);
2299
2300         if (dev->irq > 0) {
2301                 dsa_switch_for_each_user_port(dp, dev->ds) {
2302                         ksz_ptp_irq_free(ds, dp->index);
2303
2304                         ksz_irq_free(&dev->ports[dp->index].pirq);
2305                 }
2306
2307                 ksz_irq_free(&dev->girq);
2308         }
2309
2310         if (dev->dev_ops->teardown)
2311                 dev->dev_ops->teardown(ds);
2312 }
2313
2314 static void port_r_cnt(struct ksz_device *dev, int port)
2315 {
2316         struct ksz_port_mib *mib = &dev->ports[port].mib;
2317         u64 *dropped;
2318
2319         /* Some ports may not have MIB counters before SWITCH_COUNTER_NUM. */
2320         while (mib->cnt_ptr < dev->info->reg_mib_cnt) {
2321                 dev->dev_ops->r_mib_cnt(dev, port, mib->cnt_ptr,
2322                                         &mib->counters[mib->cnt_ptr]);
2323                 ++mib->cnt_ptr;
2324         }
2325
2326         /* last one in storage */
2327         dropped = &mib->counters[dev->info->mib_cnt];
2328
2329         /* Some ports may not have MIB counters after SWITCH_COUNTER_NUM. */
2330         while (mib->cnt_ptr < dev->info->mib_cnt) {
2331                 dev->dev_ops->r_mib_pkt(dev, port, mib->cnt_ptr,
2332                                         dropped, &mib->counters[mib->cnt_ptr]);
2333                 ++mib->cnt_ptr;
2334         }
2335         mib->cnt_ptr = 0;
2336 }
2337
2338 static void ksz_mib_read_work(struct work_struct *work)
2339 {
2340         struct ksz_device *dev = container_of(work, struct ksz_device,
2341                                               mib_read.work);
2342         struct ksz_port_mib *mib;
2343         struct ksz_port *p;
2344         int i;
2345
2346         for (i = 0; i < dev->info->port_cnt; i++) {
2347                 if (dsa_is_unused_port(dev->ds, i))
2348                         continue;
2349
2350                 p = &dev->ports[i];
2351                 mib = &p->mib;
2352                 mutex_lock(&mib->cnt_mutex);
2353
2354                 /* Only read MIB counters when the port is told to do.
2355                  * If not, read only dropped counters when link is not up.
2356                  */
2357                 if (!p->read) {
2358                         const struct dsa_port *dp = dsa_to_port(dev->ds, i);
2359
2360                         if (!netif_carrier_ok(dp->user))
2361                                 mib->cnt_ptr = dev->info->reg_mib_cnt;
2362                 }
2363                 port_r_cnt(dev, i);
2364                 p->read = false;
2365
2366                 if (dev->dev_ops->r_mib_stat64)
2367                         dev->dev_ops->r_mib_stat64(dev, i);
2368
2369                 mutex_unlock(&mib->cnt_mutex);
2370         }
2371
2372         schedule_delayed_work(&dev->mib_read, dev->mib_read_interval);
2373 }
2374
2375 void ksz_init_mib_timer(struct ksz_device *dev)
2376 {
2377         int i;
2378
2379         INIT_DELAYED_WORK(&dev->mib_read, ksz_mib_read_work);
2380
2381         for (i = 0; i < dev->info->port_cnt; i++) {
2382                 struct ksz_port_mib *mib = &dev->ports[i].mib;
2383
2384                 dev->dev_ops->port_init_cnt(dev, i);
2385
2386                 mib->cnt_ptr = 0;
2387                 memset(mib->counters, 0, dev->info->mib_cnt * sizeof(u64));
2388         }
2389 }
2390
2391 static int ksz_phy_read16(struct dsa_switch *ds, int addr, int reg)
2392 {
2393         struct ksz_device *dev = ds->priv;
2394         u16 val = 0xffff;
2395         int ret;
2396
2397         ret = dev->dev_ops->r_phy(dev, addr, reg, &val);
2398         if (ret)
2399                 return ret;
2400
2401         return val;
2402 }
2403
2404 static int ksz_phy_write16(struct dsa_switch *ds, int addr, int reg, u16 val)
2405 {
2406         struct ksz_device *dev = ds->priv;
2407         int ret;
2408
2409         ret = dev->dev_ops->w_phy(dev, addr, reg, val);
2410         if (ret)
2411                 return ret;
2412
2413         return 0;
2414 }
2415
2416 static u32 ksz_get_phy_flags(struct dsa_switch *ds, int port)
2417 {
2418         struct ksz_device *dev = ds->priv;
2419
2420         switch (dev->chip_id) {
2421         case KSZ8830_CHIP_ID:
2422                 /* Silicon Errata Sheet (DS80000830A):
2423                  * Port 1 does not work with LinkMD Cable-Testing.
2424                  * Port 1 does not respond to received PAUSE control frames.
2425                  */
2426                 if (!port)
2427                         return MICREL_KSZ8_P1_ERRATA;
2428                 break;
2429         case KSZ9477_CHIP_ID:
2430                 /* KSZ9477 Errata DS80000754C
2431                  *
2432                  * Module 4: Energy Efficient Ethernet (EEE) feature select must
2433                  * be manually disabled
2434                  *   The EEE feature is enabled by default, but it is not fully
2435                  *   operational. It must be manually disabled through register
2436                  *   controls. If not disabled, the PHY ports can auto-negotiate
2437                  *   to enable EEE, and this feature can cause link drops when
2438                  *   linked to another device supporting EEE.
2439                  */
2440                 return MICREL_NO_EEE;
2441         }
2442
2443         return 0;
2444 }
2445
2446 static void ksz_mac_link_down(struct dsa_switch *ds, int port,
2447                               unsigned int mode, phy_interface_t interface)
2448 {
2449         struct ksz_device *dev = ds->priv;
2450         struct ksz_port *p = &dev->ports[port];
2451
2452         /* Read all MIB counters when the link is going down. */
2453         p->read = true;
2454         /* timer started */
2455         if (dev->mib_read_interval)
2456                 schedule_delayed_work(&dev->mib_read, 0);
2457 }
2458
2459 static int ksz_sset_count(struct dsa_switch *ds, int port, int sset)
2460 {
2461         struct ksz_device *dev = ds->priv;
2462
2463         if (sset != ETH_SS_STATS)
2464                 return 0;
2465
2466         return dev->info->mib_cnt;
2467 }
2468
2469 static void ksz_get_ethtool_stats(struct dsa_switch *ds, int port,
2470                                   uint64_t *buf)
2471 {
2472         const struct dsa_port *dp = dsa_to_port(ds, port);
2473         struct ksz_device *dev = ds->priv;
2474         struct ksz_port_mib *mib;
2475
2476         mib = &dev->ports[port].mib;
2477         mutex_lock(&mib->cnt_mutex);
2478
2479         /* Only read dropped counters if no link. */
2480         if (!netif_carrier_ok(dp->user))
2481                 mib->cnt_ptr = dev->info->reg_mib_cnt;
2482         port_r_cnt(dev, port);
2483         memcpy(buf, mib->counters, dev->info->mib_cnt * sizeof(u64));
2484         mutex_unlock(&mib->cnt_mutex);
2485 }
2486
2487 static int ksz_port_bridge_join(struct dsa_switch *ds, int port,
2488                                 struct dsa_bridge bridge,
2489                                 bool *tx_fwd_offload,
2490                                 struct netlink_ext_ack *extack)
2491 {
2492         /* port_stp_state_set() will be called after to put the port in
2493          * appropriate state so there is no need to do anything.
2494          */
2495
2496         return 0;
2497 }
2498
2499 static void ksz_port_bridge_leave(struct dsa_switch *ds, int port,
2500                                   struct dsa_bridge bridge)
2501 {
2502         /* port_stp_state_set() will be called after to put the port in
2503          * forwarding state so there is no need to do anything.
2504          */
2505 }
2506
2507 static void ksz_port_fast_age(struct dsa_switch *ds, int port)
2508 {
2509         struct ksz_device *dev = ds->priv;
2510
2511         dev->dev_ops->flush_dyn_mac_table(dev, port);
2512 }
2513
2514 static int ksz_set_ageing_time(struct dsa_switch *ds, unsigned int msecs)
2515 {
2516         struct ksz_device *dev = ds->priv;
2517
2518         if (!dev->dev_ops->set_ageing_time)
2519                 return -EOPNOTSUPP;
2520
2521         return dev->dev_ops->set_ageing_time(dev, msecs);
2522 }
2523
2524 static int ksz_port_fdb_add(struct dsa_switch *ds, int port,
2525                             const unsigned char *addr, u16 vid,
2526                             struct dsa_db db)
2527 {
2528         struct ksz_device *dev = ds->priv;
2529
2530         if (!dev->dev_ops->fdb_add)
2531                 return -EOPNOTSUPP;
2532
2533         return dev->dev_ops->fdb_add(dev, port, addr, vid, db);
2534 }
2535
2536 static int ksz_port_fdb_del(struct dsa_switch *ds, int port,
2537                             const unsigned char *addr,
2538                             u16 vid, struct dsa_db db)
2539 {
2540         struct ksz_device *dev = ds->priv;
2541
2542         if (!dev->dev_ops->fdb_del)
2543                 return -EOPNOTSUPP;
2544
2545         return dev->dev_ops->fdb_del(dev, port, addr, vid, db);
2546 }
2547
2548 static int ksz_port_fdb_dump(struct dsa_switch *ds, int port,
2549                              dsa_fdb_dump_cb_t *cb, void *data)
2550 {
2551         struct ksz_device *dev = ds->priv;
2552
2553         if (!dev->dev_ops->fdb_dump)
2554                 return -EOPNOTSUPP;
2555
2556         return dev->dev_ops->fdb_dump(dev, port, cb, data);
2557 }
2558
2559 static int ksz_port_mdb_add(struct dsa_switch *ds, int port,
2560                             const struct switchdev_obj_port_mdb *mdb,
2561                             struct dsa_db db)
2562 {
2563         struct ksz_device *dev = ds->priv;
2564
2565         if (!dev->dev_ops->mdb_add)
2566                 return -EOPNOTSUPP;
2567
2568         return dev->dev_ops->mdb_add(dev, port, mdb, db);
2569 }
2570
2571 static int ksz_port_mdb_del(struct dsa_switch *ds, int port,
2572                             const struct switchdev_obj_port_mdb *mdb,
2573                             struct dsa_db db)
2574 {
2575         struct ksz_device *dev = ds->priv;
2576
2577         if (!dev->dev_ops->mdb_del)
2578                 return -EOPNOTSUPP;
2579
2580         return dev->dev_ops->mdb_del(dev, port, mdb, db);
2581 }
2582
2583 static int ksz_port_setup(struct dsa_switch *ds, int port)
2584 {
2585         struct ksz_device *dev = ds->priv;
2586
2587         if (!dsa_is_user_port(ds, port))
2588                 return 0;
2589
2590         /* setup user port */
2591         dev->dev_ops->port_setup(dev, port, false);
2592
2593         /* port_stp_state_set() will be called after to enable the port so
2594          * there is no need to do anything.
2595          */
2596
2597         return 0;
2598 }
2599
2600 void ksz_port_stp_state_set(struct dsa_switch *ds, int port, u8 state)
2601 {
2602         struct ksz_device *dev = ds->priv;
2603         struct ksz_port *p;
2604         const u16 *regs;
2605         u8 data;
2606
2607         regs = dev->info->regs;
2608
2609         ksz_pread8(dev, port, regs[P_STP_CTRL], &data);
2610         data &= ~(PORT_TX_ENABLE | PORT_RX_ENABLE | PORT_LEARN_DISABLE);
2611
2612         p = &dev->ports[port];
2613
2614         switch (state) {
2615         case BR_STATE_DISABLED:
2616                 data |= PORT_LEARN_DISABLE;
2617                 break;
2618         case BR_STATE_LISTENING:
2619                 data |= (PORT_RX_ENABLE | PORT_LEARN_DISABLE);
2620                 break;
2621         case BR_STATE_LEARNING:
2622                 data |= PORT_RX_ENABLE;
2623                 if (!p->learning)
2624                         data |= PORT_LEARN_DISABLE;
2625                 break;
2626         case BR_STATE_FORWARDING:
2627                 data |= (PORT_TX_ENABLE | PORT_RX_ENABLE);
2628                 if (!p->learning)
2629                         data |= PORT_LEARN_DISABLE;
2630                 break;
2631         case BR_STATE_BLOCKING:
2632                 data |= PORT_LEARN_DISABLE;
2633                 break;
2634         default:
2635                 dev_err(ds->dev, "invalid STP state: %d\n", state);
2636                 return;
2637         }
2638
2639         ksz_pwrite8(dev, port, regs[P_STP_CTRL], data);
2640
2641         p->stp_state = state;
2642
2643         ksz_update_port_member(dev, port);
2644 }
2645
2646 static void ksz_port_teardown(struct dsa_switch *ds, int port)
2647 {
2648         struct ksz_device *dev = ds->priv;
2649
2650         switch (dev->chip_id) {
2651         case KSZ8563_CHIP_ID:
2652         case KSZ9477_CHIP_ID:
2653         case KSZ9563_CHIP_ID:
2654         case KSZ9567_CHIP_ID:
2655         case KSZ9893_CHIP_ID:
2656         case KSZ9896_CHIP_ID:
2657         case KSZ9897_CHIP_ID:
2658                 if (dsa_is_user_port(ds, port))
2659                         ksz9477_port_acl_free(dev, port);
2660         }
2661 }
2662
2663 static int ksz_port_pre_bridge_flags(struct dsa_switch *ds, int port,
2664                                      struct switchdev_brport_flags flags,
2665                                      struct netlink_ext_ack *extack)
2666 {
2667         if (flags.mask & ~BR_LEARNING)
2668                 return -EINVAL;
2669
2670         return 0;
2671 }
2672
2673 static int ksz_port_bridge_flags(struct dsa_switch *ds, int port,
2674                                  struct switchdev_brport_flags flags,
2675                                  struct netlink_ext_ack *extack)
2676 {
2677         struct ksz_device *dev = ds->priv;
2678         struct ksz_port *p = &dev->ports[port];
2679
2680         if (flags.mask & BR_LEARNING) {
2681                 p->learning = !!(flags.val & BR_LEARNING);
2682
2683                 /* Make the change take effect immediately */
2684                 ksz_port_stp_state_set(ds, port, p->stp_state);
2685         }
2686
2687         return 0;
2688 }
2689
2690 static enum dsa_tag_protocol ksz_get_tag_protocol(struct dsa_switch *ds,
2691                                                   int port,
2692                                                   enum dsa_tag_protocol mp)
2693 {
2694         struct ksz_device *dev = ds->priv;
2695         enum dsa_tag_protocol proto = DSA_TAG_PROTO_NONE;
2696
2697         if (dev->chip_id == KSZ8795_CHIP_ID ||
2698             dev->chip_id == KSZ8794_CHIP_ID ||
2699             dev->chip_id == KSZ8765_CHIP_ID)
2700                 proto = DSA_TAG_PROTO_KSZ8795;
2701
2702         if (dev->chip_id == KSZ8830_CHIP_ID ||
2703             dev->chip_id == KSZ8563_CHIP_ID ||
2704             dev->chip_id == KSZ9893_CHIP_ID ||
2705             dev->chip_id == KSZ9563_CHIP_ID)
2706                 proto = DSA_TAG_PROTO_KSZ9893;
2707
2708         if (dev->chip_id == KSZ9477_CHIP_ID ||
2709             dev->chip_id == KSZ9896_CHIP_ID ||
2710             dev->chip_id == KSZ9897_CHIP_ID ||
2711             dev->chip_id == KSZ9567_CHIP_ID)
2712                 proto = DSA_TAG_PROTO_KSZ9477;
2713
2714         if (is_lan937x(dev))
2715                 proto = DSA_TAG_PROTO_LAN937X_VALUE;
2716
2717         return proto;
2718 }
2719
2720 static int ksz_connect_tag_protocol(struct dsa_switch *ds,
2721                                     enum dsa_tag_protocol proto)
2722 {
2723         struct ksz_tagger_data *tagger_data;
2724
2725         switch (proto) {
2726         case DSA_TAG_PROTO_KSZ8795:
2727                 return 0;
2728         case DSA_TAG_PROTO_KSZ9893:
2729         case DSA_TAG_PROTO_KSZ9477:
2730         case DSA_TAG_PROTO_LAN937X:
2731                 tagger_data = ksz_tagger_data(ds);
2732                 tagger_data->xmit_work_fn = ksz_port_deferred_xmit;
2733                 return 0;
2734         default:
2735                 return -EPROTONOSUPPORT;
2736         }
2737 }
2738
2739 static int ksz_port_vlan_filtering(struct dsa_switch *ds, int port,
2740                                    bool flag, struct netlink_ext_ack *extack)
2741 {
2742         struct ksz_device *dev = ds->priv;
2743
2744         if (!dev->dev_ops->vlan_filtering)
2745                 return -EOPNOTSUPP;
2746
2747         return dev->dev_ops->vlan_filtering(dev, port, flag, extack);
2748 }
2749
2750 static int ksz_port_vlan_add(struct dsa_switch *ds, int port,
2751                              const struct switchdev_obj_port_vlan *vlan,
2752                              struct netlink_ext_ack *extack)
2753 {
2754         struct ksz_device *dev = ds->priv;
2755
2756         if (!dev->dev_ops->vlan_add)
2757                 return -EOPNOTSUPP;
2758
2759         return dev->dev_ops->vlan_add(dev, port, vlan, extack);
2760 }
2761
2762 static int ksz_port_vlan_del(struct dsa_switch *ds, int port,
2763                              const struct switchdev_obj_port_vlan *vlan)
2764 {
2765         struct ksz_device *dev = ds->priv;
2766
2767         if (!dev->dev_ops->vlan_del)
2768                 return -EOPNOTSUPP;
2769
2770         return dev->dev_ops->vlan_del(dev, port, vlan);
2771 }
2772
2773 static int ksz_port_mirror_add(struct dsa_switch *ds, int port,
2774                                struct dsa_mall_mirror_tc_entry *mirror,
2775                                bool ingress, struct netlink_ext_ack *extack)
2776 {
2777         struct ksz_device *dev = ds->priv;
2778
2779         if (!dev->dev_ops->mirror_add)
2780                 return -EOPNOTSUPP;
2781
2782         return dev->dev_ops->mirror_add(dev, port, mirror, ingress, extack);
2783 }
2784
2785 static void ksz_port_mirror_del(struct dsa_switch *ds, int port,
2786                                 struct dsa_mall_mirror_tc_entry *mirror)
2787 {
2788         struct ksz_device *dev = ds->priv;
2789
2790         if (dev->dev_ops->mirror_del)
2791                 dev->dev_ops->mirror_del(dev, port, mirror);
2792 }
2793
2794 static int ksz_change_mtu(struct dsa_switch *ds, int port, int mtu)
2795 {
2796         struct ksz_device *dev = ds->priv;
2797
2798         if (!dev->dev_ops->change_mtu)
2799                 return -EOPNOTSUPP;
2800
2801         return dev->dev_ops->change_mtu(dev, port, mtu);
2802 }
2803
2804 static int ksz_max_mtu(struct dsa_switch *ds, int port)
2805 {
2806         struct ksz_device *dev = ds->priv;
2807
2808         switch (dev->chip_id) {
2809         case KSZ8795_CHIP_ID:
2810         case KSZ8794_CHIP_ID:
2811         case KSZ8765_CHIP_ID:
2812                 return KSZ8795_HUGE_PACKET_SIZE - VLAN_ETH_HLEN - ETH_FCS_LEN;
2813         case KSZ8830_CHIP_ID:
2814                 return KSZ8863_HUGE_PACKET_SIZE - VLAN_ETH_HLEN - ETH_FCS_LEN;
2815         case KSZ8563_CHIP_ID:
2816         case KSZ9477_CHIP_ID:
2817         case KSZ9563_CHIP_ID:
2818         case KSZ9567_CHIP_ID:
2819         case KSZ9893_CHIP_ID:
2820         case KSZ9896_CHIP_ID:
2821         case KSZ9897_CHIP_ID:
2822         case LAN9370_CHIP_ID:
2823         case LAN9371_CHIP_ID:
2824         case LAN9372_CHIP_ID:
2825         case LAN9373_CHIP_ID:
2826         case LAN9374_CHIP_ID:
2827                 return KSZ9477_MAX_FRAME_SIZE - VLAN_ETH_HLEN - ETH_FCS_LEN;
2828         }
2829
2830         return -EOPNOTSUPP;
2831 }
2832
2833 static int ksz_validate_eee(struct dsa_switch *ds, int port)
2834 {
2835         struct ksz_device *dev = ds->priv;
2836
2837         if (!dev->info->internal_phy[port])
2838                 return -EOPNOTSUPP;
2839
2840         switch (dev->chip_id) {
2841         case KSZ8563_CHIP_ID:
2842         case KSZ9477_CHIP_ID:
2843         case KSZ9563_CHIP_ID:
2844         case KSZ9567_CHIP_ID:
2845         case KSZ9893_CHIP_ID:
2846         case KSZ9896_CHIP_ID:
2847         case KSZ9897_CHIP_ID:
2848                 return 0;
2849         }
2850
2851         return -EOPNOTSUPP;
2852 }
2853
2854 static int ksz_get_mac_eee(struct dsa_switch *ds, int port,
2855                            struct ethtool_eee *e)
2856 {
2857         int ret;
2858
2859         ret = ksz_validate_eee(ds, port);
2860         if (ret)
2861                 return ret;
2862
2863         /* There is no documented control of Tx LPI configuration. */
2864         e->tx_lpi_enabled = true;
2865
2866         /* There is no documented control of Tx LPI timer. According to tests
2867          * Tx LPI timer seems to be set by default to minimal value.
2868          */
2869         e->tx_lpi_timer = 0;
2870
2871         return 0;
2872 }
2873
2874 static int ksz_set_mac_eee(struct dsa_switch *ds, int port,
2875                            struct ethtool_eee *e)
2876 {
2877         struct ksz_device *dev = ds->priv;
2878         int ret;
2879
2880         ret = ksz_validate_eee(ds, port);
2881         if (ret)
2882                 return ret;
2883
2884         if (!e->tx_lpi_enabled) {
2885                 dev_err(dev->dev, "Disabling EEE Tx LPI is not supported\n");
2886                 return -EINVAL;
2887         }
2888
2889         if (e->tx_lpi_timer) {
2890                 dev_err(dev->dev, "Setting EEE Tx LPI timer is not supported\n");
2891                 return -EINVAL;
2892         }
2893
2894         return 0;
2895 }
2896
2897 static void ksz_set_xmii(struct ksz_device *dev, int port,
2898                          phy_interface_t interface)
2899 {
2900         const u8 *bitval = dev->info->xmii_ctrl1;
2901         struct ksz_port *p = &dev->ports[port];
2902         const u16 *regs = dev->info->regs;
2903         u8 data8;
2904
2905         ksz_pread8(dev, port, regs[P_XMII_CTRL_1], &data8);
2906
2907         data8 &= ~(P_MII_SEL_M | P_RGMII_ID_IG_ENABLE |
2908                    P_RGMII_ID_EG_ENABLE);
2909
2910         switch (interface) {
2911         case PHY_INTERFACE_MODE_MII:
2912                 data8 |= bitval[P_MII_SEL];
2913                 break;
2914         case PHY_INTERFACE_MODE_RMII:
2915                 data8 |= bitval[P_RMII_SEL];
2916                 break;
2917         case PHY_INTERFACE_MODE_GMII:
2918                 data8 |= bitval[P_GMII_SEL];
2919                 break;
2920         case PHY_INTERFACE_MODE_RGMII:
2921         case PHY_INTERFACE_MODE_RGMII_ID:
2922         case PHY_INTERFACE_MODE_RGMII_TXID:
2923         case PHY_INTERFACE_MODE_RGMII_RXID:
2924                 data8 |= bitval[P_RGMII_SEL];
2925                 /* On KSZ9893, disable RGMII in-band status support */
2926                 if (dev->chip_id == KSZ9893_CHIP_ID ||
2927                     dev->chip_id == KSZ8563_CHIP_ID ||
2928                     dev->chip_id == KSZ9563_CHIP_ID)
2929                         data8 &= ~P_MII_MAC_MODE;
2930                 break;
2931         default:
2932                 dev_err(dev->dev, "Unsupported interface '%s' for port %d\n",
2933                         phy_modes(interface), port);
2934                 return;
2935         }
2936
2937         if (p->rgmii_tx_val)
2938                 data8 |= P_RGMII_ID_EG_ENABLE;
2939
2940         if (p->rgmii_rx_val)
2941                 data8 |= P_RGMII_ID_IG_ENABLE;
2942
2943         /* Write the updated value */
2944         ksz_pwrite8(dev, port, regs[P_XMII_CTRL_1], data8);
2945 }
2946
2947 phy_interface_t ksz_get_xmii(struct ksz_device *dev, int port, bool gbit)
2948 {
2949         const u8 *bitval = dev->info->xmii_ctrl1;
2950         const u16 *regs = dev->info->regs;
2951         phy_interface_t interface;
2952         u8 data8;
2953         u8 val;
2954
2955         ksz_pread8(dev, port, regs[P_XMII_CTRL_1], &data8);
2956
2957         val = FIELD_GET(P_MII_SEL_M, data8);
2958
2959         if (val == bitval[P_MII_SEL]) {
2960                 if (gbit)
2961                         interface = PHY_INTERFACE_MODE_GMII;
2962                 else
2963                         interface = PHY_INTERFACE_MODE_MII;
2964         } else if (val == bitval[P_RMII_SEL]) {
2965                 interface = PHY_INTERFACE_MODE_RGMII;
2966         } else {
2967                 interface = PHY_INTERFACE_MODE_RGMII;
2968                 if (data8 & P_RGMII_ID_EG_ENABLE)
2969                         interface = PHY_INTERFACE_MODE_RGMII_TXID;
2970                 if (data8 & P_RGMII_ID_IG_ENABLE) {
2971                         interface = PHY_INTERFACE_MODE_RGMII_RXID;
2972                         if (data8 & P_RGMII_ID_EG_ENABLE)
2973                                 interface = PHY_INTERFACE_MODE_RGMII_ID;
2974                 }
2975         }
2976
2977         return interface;
2978 }
2979
2980 static void ksz_phylink_mac_config(struct dsa_switch *ds, int port,
2981                                    unsigned int mode,
2982                                    const struct phylink_link_state *state)
2983 {
2984         struct ksz_device *dev = ds->priv;
2985
2986         if (ksz_is_ksz88x3(dev)) {
2987                 dev->ports[port].manual_flow = !(state->pause & MLO_PAUSE_AN);
2988                 return;
2989         }
2990
2991         /* Internal PHYs */
2992         if (dev->info->internal_phy[port])
2993                 return;
2994
2995         if (phylink_autoneg_inband(mode)) {
2996                 dev_err(dev->dev, "In-band AN not supported!\n");
2997                 return;
2998         }
2999
3000         ksz_set_xmii(dev, port, state->interface);
3001
3002         if (dev->dev_ops->phylink_mac_config)
3003                 dev->dev_ops->phylink_mac_config(dev, port, mode, state);
3004
3005         if (dev->dev_ops->setup_rgmii_delay)
3006                 dev->dev_ops->setup_rgmii_delay(dev, port);
3007 }
3008
3009 bool ksz_get_gbit(struct ksz_device *dev, int port)
3010 {
3011         const u8 *bitval = dev->info->xmii_ctrl1;
3012         const u16 *regs = dev->info->regs;
3013         bool gbit = false;
3014         u8 data8;
3015         bool val;
3016
3017         ksz_pread8(dev, port, regs[P_XMII_CTRL_1], &data8);
3018
3019         val = FIELD_GET(P_GMII_1GBIT_M, data8);
3020
3021         if (val == bitval[P_GMII_1GBIT])
3022                 gbit = true;
3023
3024         return gbit;
3025 }
3026
3027 static void ksz_set_gbit(struct ksz_device *dev, int port, bool gbit)
3028 {
3029         const u8 *bitval = dev->info->xmii_ctrl1;
3030         const u16 *regs = dev->info->regs;
3031         u8 data8;
3032
3033         ksz_pread8(dev, port, regs[P_XMII_CTRL_1], &data8);
3034
3035         data8 &= ~P_GMII_1GBIT_M;
3036
3037         if (gbit)
3038                 data8 |= FIELD_PREP(P_GMII_1GBIT_M, bitval[P_GMII_1GBIT]);
3039         else
3040                 data8 |= FIELD_PREP(P_GMII_1GBIT_M, bitval[P_GMII_NOT_1GBIT]);
3041
3042         /* Write the updated value */
3043         ksz_pwrite8(dev, port, regs[P_XMII_CTRL_1], data8);
3044 }
3045
3046 static void ksz_set_100_10mbit(struct ksz_device *dev, int port, int speed)
3047 {
3048         const u8 *bitval = dev->info->xmii_ctrl0;
3049         const u16 *regs = dev->info->regs;
3050         u8 data8;
3051
3052         ksz_pread8(dev, port, regs[P_XMII_CTRL_0], &data8);
3053
3054         data8 &= ~P_MII_100MBIT_M;
3055
3056         if (speed == SPEED_100)
3057                 data8 |= FIELD_PREP(P_MII_100MBIT_M, bitval[P_MII_100MBIT]);
3058         else
3059                 data8 |= FIELD_PREP(P_MII_100MBIT_M, bitval[P_MII_10MBIT]);
3060
3061         /* Write the updated value */
3062         ksz_pwrite8(dev, port, regs[P_XMII_CTRL_0], data8);
3063 }
3064
3065 static void ksz_port_set_xmii_speed(struct ksz_device *dev, int port, int speed)
3066 {
3067         if (speed == SPEED_1000)
3068                 ksz_set_gbit(dev, port, true);
3069         else
3070                 ksz_set_gbit(dev, port, false);
3071
3072         if (speed == SPEED_100 || speed == SPEED_10)
3073                 ksz_set_100_10mbit(dev, port, speed);
3074 }
3075
3076 static void ksz_duplex_flowctrl(struct ksz_device *dev, int port, int duplex,
3077                                 bool tx_pause, bool rx_pause)
3078 {
3079         const u8 *bitval = dev->info->xmii_ctrl0;
3080         const u32 *masks = dev->info->masks;
3081         const u16 *regs = dev->info->regs;
3082         u8 mask;
3083         u8 val;
3084
3085         mask = P_MII_DUPLEX_M | masks[P_MII_TX_FLOW_CTRL] |
3086                masks[P_MII_RX_FLOW_CTRL];
3087
3088         if (duplex == DUPLEX_FULL)
3089                 val = FIELD_PREP(P_MII_DUPLEX_M, bitval[P_MII_FULL_DUPLEX]);
3090         else
3091                 val = FIELD_PREP(P_MII_DUPLEX_M, bitval[P_MII_HALF_DUPLEX]);
3092
3093         if (tx_pause)
3094                 val |= masks[P_MII_TX_FLOW_CTRL];
3095
3096         if (rx_pause)
3097                 val |= masks[P_MII_RX_FLOW_CTRL];
3098
3099         ksz_prmw8(dev, port, regs[P_XMII_CTRL_0], mask, val);
3100 }
3101
3102 static void ksz9477_phylink_mac_link_up(struct ksz_device *dev, int port,
3103                                         unsigned int mode,
3104                                         phy_interface_t interface,
3105                                         struct phy_device *phydev, int speed,
3106                                         int duplex, bool tx_pause,
3107                                         bool rx_pause)
3108 {
3109         struct ksz_port *p;
3110
3111         p = &dev->ports[port];
3112
3113         /* Internal PHYs */
3114         if (dev->info->internal_phy[port])
3115                 return;
3116
3117         p->phydev.speed = speed;
3118
3119         ksz_port_set_xmii_speed(dev, port, speed);
3120
3121         ksz_duplex_flowctrl(dev, port, duplex, tx_pause, rx_pause);
3122 }
3123
3124 static void ksz_phylink_mac_link_up(struct dsa_switch *ds, int port,
3125                                     unsigned int mode,
3126                                     phy_interface_t interface,
3127                                     struct phy_device *phydev, int speed,
3128                                     int duplex, bool tx_pause, bool rx_pause)
3129 {
3130         struct ksz_device *dev = ds->priv;
3131
3132         dev->dev_ops->phylink_mac_link_up(dev, port, mode, interface, phydev,
3133                                           speed, duplex, tx_pause, rx_pause);
3134 }
3135
3136 static int ksz_switch_detect(struct ksz_device *dev)
3137 {
3138         u8 id1, id2, id4;
3139         u16 id16;
3140         u32 id32;
3141         int ret;
3142
3143         /* read chip id */
3144         ret = ksz_read16(dev, REG_CHIP_ID0, &id16);
3145         if (ret)
3146                 return ret;
3147
3148         id1 = FIELD_GET(SW_FAMILY_ID_M, id16);
3149         id2 = FIELD_GET(SW_CHIP_ID_M, id16);
3150
3151         switch (id1) {
3152         case KSZ87_FAMILY_ID:
3153                 if (id2 == KSZ87_CHIP_ID_95) {
3154                         u8 val;
3155
3156                         dev->chip_id = KSZ8795_CHIP_ID;
3157
3158                         ksz_read8(dev, KSZ8_PORT_STATUS_0, &val);
3159                         if (val & KSZ8_PORT_FIBER_MODE)
3160                                 dev->chip_id = KSZ8765_CHIP_ID;
3161                 } else if (id2 == KSZ87_CHIP_ID_94) {
3162                         dev->chip_id = KSZ8794_CHIP_ID;
3163                 } else {
3164                         return -ENODEV;
3165                 }
3166                 break;
3167         case KSZ88_FAMILY_ID:
3168                 if (id2 == KSZ88_CHIP_ID_63)
3169                         dev->chip_id = KSZ8830_CHIP_ID;
3170                 else
3171                         return -ENODEV;
3172                 break;
3173         default:
3174                 ret = ksz_read32(dev, REG_CHIP_ID0, &id32);
3175                 if (ret)
3176                         return ret;
3177
3178                 dev->chip_rev = FIELD_GET(SW_REV_ID_M, id32);
3179                 id32 &= ~0xFF;
3180
3181                 switch (id32) {
3182                 case KSZ9477_CHIP_ID:
3183                 case KSZ9896_CHIP_ID:
3184                 case KSZ9897_CHIP_ID:
3185                 case KSZ9567_CHIP_ID:
3186                 case LAN9370_CHIP_ID:
3187                 case LAN9371_CHIP_ID:
3188                 case LAN9372_CHIP_ID:
3189                 case LAN9373_CHIP_ID:
3190                 case LAN9374_CHIP_ID:
3191                         dev->chip_id = id32;
3192                         break;
3193                 case KSZ9893_CHIP_ID:
3194                         ret = ksz_read8(dev, REG_CHIP_ID4,
3195                                         &id4);
3196                         if (ret)
3197                                 return ret;
3198
3199                         if (id4 == SKU_ID_KSZ8563)
3200                                 dev->chip_id = KSZ8563_CHIP_ID;
3201                         else if (id4 == SKU_ID_KSZ9563)
3202                                 dev->chip_id = KSZ9563_CHIP_ID;
3203                         else
3204                                 dev->chip_id = KSZ9893_CHIP_ID;
3205
3206                         break;
3207                 default:
3208                         dev_err(dev->dev,
3209                                 "unsupported switch detected %x)\n", id32);
3210                         return -ENODEV;
3211                 }
3212         }
3213         return 0;
3214 }
3215
3216 static int ksz_cls_flower_add(struct dsa_switch *ds, int port,
3217                               struct flow_cls_offload *cls, bool ingress)
3218 {
3219         struct ksz_device *dev = ds->priv;
3220
3221         switch (dev->chip_id) {
3222         case KSZ8563_CHIP_ID:
3223         case KSZ9477_CHIP_ID:
3224         case KSZ9563_CHIP_ID:
3225         case KSZ9567_CHIP_ID:
3226         case KSZ9893_CHIP_ID:
3227         case KSZ9896_CHIP_ID:
3228         case KSZ9897_CHIP_ID:
3229                 return ksz9477_cls_flower_add(ds, port, cls, ingress);
3230         }
3231
3232         return -EOPNOTSUPP;
3233 }
3234
3235 static int ksz_cls_flower_del(struct dsa_switch *ds, int port,
3236                               struct flow_cls_offload *cls, bool ingress)
3237 {
3238         struct ksz_device *dev = ds->priv;
3239
3240         switch (dev->chip_id) {
3241         case KSZ8563_CHIP_ID:
3242         case KSZ9477_CHIP_ID:
3243         case KSZ9563_CHIP_ID:
3244         case KSZ9567_CHIP_ID:
3245         case KSZ9893_CHIP_ID:
3246         case KSZ9896_CHIP_ID:
3247         case KSZ9897_CHIP_ID:
3248                 return ksz9477_cls_flower_del(ds, port, cls, ingress);
3249         }
3250
3251         return -EOPNOTSUPP;
3252 }
3253
3254 /* Bandwidth is calculated by idle slope/transmission speed. Then the Bandwidth
3255  * is converted to Hex-decimal using the successive multiplication method. On
3256  * every step, integer part is taken and decimal part is carry forwarded.
3257  */
3258 static int cinc_cal(s32 idle_slope, s32 send_slope, u32 *bw)
3259 {
3260         u32 cinc = 0;
3261         u32 txrate;
3262         u32 rate;
3263         u8 temp;
3264         u8 i;
3265
3266         txrate = idle_slope - send_slope;
3267
3268         if (!txrate)
3269                 return -EINVAL;
3270
3271         rate = idle_slope;
3272
3273         /* 24 bit register */
3274         for (i = 0; i < 6; i++) {
3275                 rate = rate * 16;
3276
3277                 temp = rate / txrate;
3278
3279                 rate %= txrate;
3280
3281                 cinc = ((cinc << 4) | temp);
3282         }
3283
3284         *bw = cinc;
3285
3286         return 0;
3287 }
3288
3289 static int ksz_setup_tc_mode(struct ksz_device *dev, int port, u8 scheduler,
3290                              u8 shaper)
3291 {
3292         return ksz_pwrite8(dev, port, REG_PORT_MTI_QUEUE_CTRL_0,
3293                            FIELD_PREP(MTI_SCHEDULE_MODE_M, scheduler) |
3294                            FIELD_PREP(MTI_SHAPING_M, shaper));
3295 }
3296
3297 static int ksz_setup_tc_cbs(struct dsa_switch *ds, int port,
3298                             struct tc_cbs_qopt_offload *qopt)
3299 {
3300         struct ksz_device *dev = ds->priv;
3301         int ret;
3302         u32 bw;
3303
3304         if (!dev->info->tc_cbs_supported)
3305                 return -EOPNOTSUPP;
3306
3307         if (qopt->queue > dev->info->num_tx_queues)
3308                 return -EINVAL;
3309
3310         /* Queue Selection */
3311         ret = ksz_pwrite32(dev, port, REG_PORT_MTI_QUEUE_INDEX__4, qopt->queue);
3312         if (ret)
3313                 return ret;
3314
3315         if (!qopt->enable)
3316                 return ksz_setup_tc_mode(dev, port, MTI_SCHEDULE_WRR,
3317                                          MTI_SHAPING_OFF);
3318
3319         /* High Credit */
3320         ret = ksz_pwrite16(dev, port, REG_PORT_MTI_HI_WATER_MARK,
3321                            qopt->hicredit);
3322         if (ret)
3323                 return ret;
3324
3325         /* Low Credit */
3326         ret = ksz_pwrite16(dev, port, REG_PORT_MTI_LO_WATER_MARK,
3327                            qopt->locredit);
3328         if (ret)
3329                 return ret;
3330
3331         /* Credit Increment Register */
3332         ret = cinc_cal(qopt->idleslope, qopt->sendslope, &bw);
3333         if (ret)
3334                 return ret;
3335
3336         if (dev->dev_ops->tc_cbs_set_cinc) {
3337                 ret = dev->dev_ops->tc_cbs_set_cinc(dev, port, bw);
3338                 if (ret)
3339                         return ret;
3340         }
3341
3342         return ksz_setup_tc_mode(dev, port, MTI_SCHEDULE_STRICT_PRIO,
3343                                  MTI_SHAPING_SRP);
3344 }
3345
3346 static int ksz_disable_egress_rate_limit(struct ksz_device *dev, int port)
3347 {
3348         int queue, ret;
3349
3350         /* Configuration will not take effect until the last Port Queue X
3351          * Egress Limit Control Register is written.
3352          */
3353         for (queue = 0; queue < dev->info->num_tx_queues; queue++) {
3354                 ret = ksz_pwrite8(dev, port, KSZ9477_REG_PORT_OUT_RATE_0 + queue,
3355                                   KSZ9477_OUT_RATE_NO_LIMIT);
3356                 if (ret)
3357                         return ret;
3358         }
3359
3360         return 0;
3361 }
3362
3363 static int ksz_ets_band_to_queue(struct tc_ets_qopt_offload_replace_params *p,
3364                                  int band)
3365 {
3366         /* Compared to queues, bands prioritize packets differently. In strict
3367          * priority mode, the lowest priority is assigned to Queue 0 while the
3368          * highest priority is given to Band 0.
3369          */
3370         return p->bands - 1 - band;
3371 }
3372
3373 static int ksz_queue_set_strict(struct ksz_device *dev, int port, int queue)
3374 {
3375         int ret;
3376
3377         ret = ksz_pwrite32(dev, port, REG_PORT_MTI_QUEUE_INDEX__4, queue);
3378         if (ret)
3379                 return ret;
3380
3381         return ksz_setup_tc_mode(dev, port, MTI_SCHEDULE_STRICT_PRIO,
3382                                  MTI_SHAPING_OFF);
3383 }
3384
3385 static int ksz_queue_set_wrr(struct ksz_device *dev, int port, int queue,
3386                              int weight)
3387 {
3388         int ret;
3389
3390         ret = ksz_pwrite32(dev, port, REG_PORT_MTI_QUEUE_INDEX__4, queue);
3391         if (ret)
3392                 return ret;
3393
3394         ret = ksz_setup_tc_mode(dev, port, MTI_SCHEDULE_WRR,
3395                                 MTI_SHAPING_OFF);
3396         if (ret)
3397                 return ret;
3398
3399         return ksz_pwrite8(dev, port, KSZ9477_PORT_MTI_QUEUE_CTRL_1, weight);
3400 }
3401
3402 static int ksz_tc_ets_add(struct ksz_device *dev, int port,
3403                           struct tc_ets_qopt_offload_replace_params *p)
3404 {
3405         int ret, band, tc_prio;
3406         u32 queue_map = 0;
3407
3408         /* In order to ensure proper prioritization, it is necessary to set the
3409          * rate limit for the related queue to zero. Otherwise strict priority
3410          * or WRR mode will not work. This is a hardware limitation.
3411          */
3412         ret = ksz_disable_egress_rate_limit(dev, port);
3413         if (ret)
3414                 return ret;
3415
3416         /* Configure queue scheduling mode for all bands. Currently only strict
3417          * prio mode is supported.
3418          */
3419         for (band = 0; band < p->bands; band++) {
3420                 int queue = ksz_ets_band_to_queue(p, band);
3421
3422                 ret = ksz_queue_set_strict(dev, port, queue);
3423                 if (ret)
3424                         return ret;
3425         }
3426
3427         /* Configure the mapping between traffic classes and queues. Note:
3428          * priomap variable support 16 traffic classes, but the chip can handle
3429          * only 8 classes.
3430          */
3431         for (tc_prio = 0; tc_prio < ARRAY_SIZE(p->priomap); tc_prio++) {
3432                 int queue;
3433
3434                 if (tc_prio > KSZ9477_MAX_TC_PRIO)
3435                         break;
3436
3437                 queue = ksz_ets_band_to_queue(p, p->priomap[tc_prio]);
3438                 queue_map |= queue << (tc_prio * KSZ9477_PORT_TC_MAP_S);
3439         }
3440
3441         return ksz_pwrite32(dev, port, KSZ9477_PORT_MRI_TC_MAP__4, queue_map);
3442 }
3443
3444 static int ksz_tc_ets_del(struct ksz_device *dev, int port)
3445 {
3446         int ret, queue, tc_prio, s;
3447         u32 queue_map = 0;
3448
3449         /* To restore the default chip configuration, set all queues to use the
3450          * WRR scheduler with a weight of 1.
3451          */
3452         for (queue = 0; queue < dev->info->num_tx_queues; queue++) {
3453                 ret = ksz_queue_set_wrr(dev, port, queue,
3454                                         KSZ9477_DEFAULT_WRR_WEIGHT);
3455                 if (ret)
3456                         return ret;
3457         }
3458
3459         switch (dev->info->num_tx_queues) {
3460         case 2:
3461                 s = 2;
3462                 break;
3463         case 4:
3464                 s = 1;
3465                 break;
3466         case 8:
3467                 s = 0;
3468                 break;
3469         default:
3470                 return -EINVAL;
3471         }
3472
3473         /* Revert the queue mapping for TC-priority to its default setting on
3474          * the chip.
3475          */
3476         for (tc_prio = 0; tc_prio <= KSZ9477_MAX_TC_PRIO; tc_prio++) {
3477                 int queue;
3478
3479                 queue = tc_prio >> s;
3480                 queue_map |= queue << (tc_prio * KSZ9477_PORT_TC_MAP_S);
3481         }
3482
3483         return ksz_pwrite32(dev, port, KSZ9477_PORT_MRI_TC_MAP__4, queue_map);
3484 }
3485
3486 static int ksz_tc_ets_validate(struct ksz_device *dev, int port,
3487                                struct tc_ets_qopt_offload_replace_params *p)
3488 {
3489         int band;
3490
3491         /* Since it is not feasible to share one port among multiple qdisc,
3492          * the user must configure all available queues appropriately.
3493          */
3494         if (p->bands != dev->info->num_tx_queues) {
3495                 dev_err(dev->dev, "Not supported amount of bands. It should be %d\n",
3496                         dev->info->num_tx_queues);
3497                 return -EOPNOTSUPP;
3498         }
3499
3500         for (band = 0; band < p->bands; ++band) {
3501                 /* The KSZ switches utilize a weighted round robin configuration
3502                  * where a certain number of packets can be transmitted from a
3503                  * queue before the next queue is serviced. For more information
3504                  * on this, refer to section 5.2.8.4 of the KSZ8565R
3505                  * documentation on the Port Transmit Queue Control 1 Register.
3506                  * However, the current ETS Qdisc implementation (as of February
3507                  * 2023) assigns a weight to each queue based on the number of
3508                  * bytes or extrapolated bandwidth in percentages. Since this
3509                  * differs from the KSZ switches' method and we don't want to
3510                  * fake support by converting bytes to packets, it is better to
3511                  * return an error instead.
3512                  */
3513                 if (p->quanta[band]) {
3514                         dev_err(dev->dev, "Quanta/weights configuration is not supported.\n");
3515                         return -EOPNOTSUPP;
3516                 }
3517         }
3518
3519         return 0;
3520 }
3521
3522 static int ksz_tc_setup_qdisc_ets(struct dsa_switch *ds, int port,
3523                                   struct tc_ets_qopt_offload *qopt)
3524 {
3525         struct ksz_device *dev = ds->priv;
3526         int ret;
3527
3528         if (!dev->info->tc_ets_supported)
3529                 return -EOPNOTSUPP;
3530
3531         if (qopt->parent != TC_H_ROOT) {
3532                 dev_err(dev->dev, "Parent should be \"root\"\n");
3533                 return -EOPNOTSUPP;
3534         }
3535
3536         switch (qopt->command) {
3537         case TC_ETS_REPLACE:
3538                 ret = ksz_tc_ets_validate(dev, port, &qopt->replace_params);
3539                 if (ret)
3540                         return ret;
3541
3542                 return ksz_tc_ets_add(dev, port, &qopt->replace_params);
3543         case TC_ETS_DESTROY:
3544                 return ksz_tc_ets_del(dev, port);
3545         case TC_ETS_STATS:
3546         case TC_ETS_GRAFT:
3547                 return -EOPNOTSUPP;
3548         }
3549
3550         return -EOPNOTSUPP;
3551 }
3552
3553 static int ksz_setup_tc(struct dsa_switch *ds, int port,
3554                         enum tc_setup_type type, void *type_data)
3555 {
3556         switch (type) {
3557         case TC_SETUP_QDISC_CBS:
3558                 return ksz_setup_tc_cbs(ds, port, type_data);
3559         case TC_SETUP_QDISC_ETS:
3560                 return ksz_tc_setup_qdisc_ets(ds, port, type_data);
3561         default:
3562                 return -EOPNOTSUPP;
3563         }
3564 }
3565
3566 static void ksz_get_wol(struct dsa_switch *ds, int port,
3567                         struct ethtool_wolinfo *wol)
3568 {
3569         struct ksz_device *dev = ds->priv;
3570
3571         if (dev->dev_ops->get_wol)
3572                 dev->dev_ops->get_wol(dev, port, wol);
3573 }
3574
3575 static int ksz_set_wol(struct dsa_switch *ds, int port,
3576                        struct ethtool_wolinfo *wol)
3577 {
3578         struct ksz_device *dev = ds->priv;
3579
3580         if (dev->dev_ops->set_wol)
3581                 return dev->dev_ops->set_wol(dev, port, wol);
3582
3583         return -EOPNOTSUPP;
3584 }
3585
3586 static int ksz_port_set_mac_address(struct dsa_switch *ds, int port,
3587                                     const unsigned char *addr)
3588 {
3589         struct dsa_port *dp = dsa_to_port(ds, port);
3590         struct ethtool_wolinfo wol;
3591
3592         if (dp->hsr_dev) {
3593                 dev_err(ds->dev,
3594                         "Cannot change MAC address on port %d with active HSR offload\n",
3595                         port);
3596                 return -EBUSY;
3597         }
3598
3599         ksz_get_wol(ds, dp->index, &wol);
3600         if (wol.wolopts & WAKE_MAGIC) {
3601                 dev_err(ds->dev,
3602                         "Cannot change MAC address on port %d with active Wake on Magic Packet\n",
3603                         port);
3604                 return -EBUSY;
3605         }
3606
3607         return 0;
3608 }
3609
3610 /**
3611  * ksz_is_port_mac_global_usable - Check if the MAC address on a given port
3612  *                                 can be used as a global address.
3613  * @ds: Pointer to the DSA switch structure.
3614  * @port: The port number on which the MAC address is to be checked.
3615  *
3616  * This function examines the MAC address set on the specified port and
3617  * determines if it can be used as a global address for the switch.
3618  *
3619  * Return: true if the port's MAC address can be used as a global address, false
3620  * otherwise.
3621  */
3622 bool ksz_is_port_mac_global_usable(struct dsa_switch *ds, int port)
3623 {
3624         struct net_device *user = dsa_to_port(ds, port)->user;
3625         const unsigned char *addr = user->dev_addr;
3626         struct ksz_switch_macaddr *switch_macaddr;
3627         struct ksz_device *dev = ds->priv;
3628
3629         ASSERT_RTNL();
3630
3631         switch_macaddr = dev->switch_macaddr;
3632         if (switch_macaddr && !ether_addr_equal(switch_macaddr->addr, addr))
3633                 return false;
3634
3635         return true;
3636 }
3637
3638 /**
3639  * ksz_switch_macaddr_get - Program the switch's MAC address register.
3640  * @ds: DSA switch instance.
3641  * @port: Port number.
3642  * @extack: Netlink extended acknowledgment.
3643  *
3644  * This function programs the switch's MAC address register with the MAC address
3645  * of the requesting user port. This single address is used by the switch for
3646  * multiple features like HSR self-address filtering and WoL. Other user ports
3647  * can share ownership of this address as long as their MAC address is the same.
3648  * The MAC addresses of user ports must not change while they have ownership of
3649  * the switch MAC address.
3650  *
3651  * Return: 0 on success, or other error codes on failure.
3652  */
3653 int ksz_switch_macaddr_get(struct dsa_switch *ds, int port,
3654                            struct netlink_ext_ack *extack)
3655 {
3656         struct net_device *user = dsa_to_port(ds, port)->user;
3657         const unsigned char *addr = user->dev_addr;
3658         struct ksz_switch_macaddr *switch_macaddr;
3659         struct ksz_device *dev = ds->priv;
3660         const u16 *regs = dev->info->regs;
3661         int i, ret;
3662
3663         /* Make sure concurrent MAC address changes are blocked */
3664         ASSERT_RTNL();
3665
3666         switch_macaddr = dev->switch_macaddr;
3667         if (switch_macaddr) {
3668                 if (!ether_addr_equal(switch_macaddr->addr, addr)) {
3669                         NL_SET_ERR_MSG_FMT_MOD(extack,
3670                                                "Switch already configured for MAC address %pM",
3671                                                switch_macaddr->addr);
3672                         return -EBUSY;
3673                 }
3674
3675                 refcount_inc(&switch_macaddr->refcount);
3676                 return 0;
3677         }
3678
3679         switch_macaddr = kzalloc(sizeof(*switch_macaddr), GFP_KERNEL);
3680         if (!switch_macaddr)
3681                 return -ENOMEM;
3682
3683         ether_addr_copy(switch_macaddr->addr, addr);
3684         refcount_set(&switch_macaddr->refcount, 1);
3685         dev->switch_macaddr = switch_macaddr;
3686
3687         /* Program the switch MAC address to hardware */
3688         for (i = 0; i < ETH_ALEN; i++) {
3689                 ret = ksz_write8(dev, regs[REG_SW_MAC_ADDR] + i, addr[i]);
3690                 if (ret)
3691                         goto macaddr_drop;
3692         }
3693
3694         return 0;
3695
3696 macaddr_drop:
3697         dev->switch_macaddr = NULL;
3698         refcount_set(&switch_macaddr->refcount, 0);
3699         kfree(switch_macaddr);
3700
3701         return ret;
3702 }
3703
3704 void ksz_switch_macaddr_put(struct dsa_switch *ds)
3705 {
3706         struct ksz_switch_macaddr *switch_macaddr;
3707         struct ksz_device *dev = ds->priv;
3708         const u16 *regs = dev->info->regs;
3709         int i;
3710
3711         /* Make sure concurrent MAC address changes are blocked */
3712         ASSERT_RTNL();
3713
3714         switch_macaddr = dev->switch_macaddr;
3715         if (!refcount_dec_and_test(&switch_macaddr->refcount))
3716                 return;
3717
3718         for (i = 0; i < ETH_ALEN; i++)
3719                 ksz_write8(dev, regs[REG_SW_MAC_ADDR] + i, 0);
3720
3721         dev->switch_macaddr = NULL;
3722         kfree(switch_macaddr);
3723 }
3724
3725 static int ksz_hsr_join(struct dsa_switch *ds, int port, struct net_device *hsr,
3726                         struct netlink_ext_ack *extack)
3727 {
3728         struct ksz_device *dev = ds->priv;
3729         enum hsr_version ver;
3730         int ret;
3731
3732         ret = hsr_get_version(hsr, &ver);
3733         if (ret)
3734                 return ret;
3735
3736         if (dev->chip_id != KSZ9477_CHIP_ID) {
3737                 NL_SET_ERR_MSG_MOD(extack, "Chip does not support HSR offload");
3738                 return -EOPNOTSUPP;
3739         }
3740
3741         /* KSZ9477 can support HW offloading of only 1 HSR device */
3742         if (dev->hsr_dev && hsr != dev->hsr_dev) {
3743                 NL_SET_ERR_MSG_MOD(extack, "Offload supported for a single HSR");
3744                 return -EOPNOTSUPP;
3745         }
3746
3747         /* KSZ9477 only supports HSR v0 and v1 */
3748         if (!(ver == HSR_V0 || ver == HSR_V1)) {
3749                 NL_SET_ERR_MSG_MOD(extack, "Only HSR v0 and v1 supported");
3750                 return -EOPNOTSUPP;
3751         }
3752
3753         /* Self MAC address filtering, to avoid frames traversing
3754          * the HSR ring more than once.
3755          */
3756         ret = ksz_switch_macaddr_get(ds, port, extack);
3757         if (ret)
3758                 return ret;
3759
3760         ksz9477_hsr_join(ds, port, hsr);
3761         dev->hsr_dev = hsr;
3762         dev->hsr_ports |= BIT(port);
3763
3764         return 0;
3765 }
3766
3767 static int ksz_hsr_leave(struct dsa_switch *ds, int port,
3768                          struct net_device *hsr)
3769 {
3770         struct ksz_device *dev = ds->priv;
3771
3772         WARN_ON(dev->chip_id != KSZ9477_CHIP_ID);
3773
3774         ksz9477_hsr_leave(ds, port, hsr);
3775         dev->hsr_ports &= ~BIT(port);
3776         if (!dev->hsr_ports)
3777                 dev->hsr_dev = NULL;
3778
3779         ksz_switch_macaddr_put(ds);
3780
3781         return 0;
3782 }
3783
3784 static const struct dsa_switch_ops ksz_switch_ops = {
3785         .get_tag_protocol       = ksz_get_tag_protocol,
3786         .connect_tag_protocol   = ksz_connect_tag_protocol,
3787         .get_phy_flags          = ksz_get_phy_flags,
3788         .setup                  = ksz_setup,
3789         .teardown               = ksz_teardown,
3790         .phy_read               = ksz_phy_read16,
3791         .phy_write              = ksz_phy_write16,
3792         .phylink_get_caps       = ksz_phylink_get_caps,
3793         .phylink_mac_config     = ksz_phylink_mac_config,
3794         .phylink_mac_link_up    = ksz_phylink_mac_link_up,
3795         .phylink_mac_link_down  = ksz_mac_link_down,
3796         .port_setup             = ksz_port_setup,
3797         .set_ageing_time        = ksz_set_ageing_time,
3798         .get_strings            = ksz_get_strings,
3799         .get_ethtool_stats      = ksz_get_ethtool_stats,
3800         .get_sset_count         = ksz_sset_count,
3801         .port_bridge_join       = ksz_port_bridge_join,
3802         .port_bridge_leave      = ksz_port_bridge_leave,
3803         .port_hsr_join          = ksz_hsr_join,
3804         .port_hsr_leave         = ksz_hsr_leave,
3805         .port_set_mac_address   = ksz_port_set_mac_address,
3806         .port_stp_state_set     = ksz_port_stp_state_set,
3807         .port_teardown          = ksz_port_teardown,
3808         .port_pre_bridge_flags  = ksz_port_pre_bridge_flags,
3809         .port_bridge_flags      = ksz_port_bridge_flags,
3810         .port_fast_age          = ksz_port_fast_age,
3811         .port_vlan_filtering    = ksz_port_vlan_filtering,
3812         .port_vlan_add          = ksz_port_vlan_add,
3813         .port_vlan_del          = ksz_port_vlan_del,
3814         .port_fdb_dump          = ksz_port_fdb_dump,
3815         .port_fdb_add           = ksz_port_fdb_add,
3816         .port_fdb_del           = ksz_port_fdb_del,
3817         .port_mdb_add           = ksz_port_mdb_add,
3818         .port_mdb_del           = ksz_port_mdb_del,
3819         .port_mirror_add        = ksz_port_mirror_add,
3820         .port_mirror_del        = ksz_port_mirror_del,
3821         .get_stats64            = ksz_get_stats64,
3822         .get_pause_stats        = ksz_get_pause_stats,
3823         .port_change_mtu        = ksz_change_mtu,
3824         .port_max_mtu           = ksz_max_mtu,
3825         .get_wol                = ksz_get_wol,
3826         .set_wol                = ksz_set_wol,
3827         .get_ts_info            = ksz_get_ts_info,
3828         .port_hwtstamp_get      = ksz_hwtstamp_get,
3829         .port_hwtstamp_set      = ksz_hwtstamp_set,
3830         .port_txtstamp          = ksz_port_txtstamp,
3831         .port_rxtstamp          = ksz_port_rxtstamp,
3832         .cls_flower_add         = ksz_cls_flower_add,
3833         .cls_flower_del         = ksz_cls_flower_del,
3834         .port_setup_tc          = ksz_setup_tc,
3835         .get_mac_eee            = ksz_get_mac_eee,
3836         .set_mac_eee            = ksz_set_mac_eee,
3837 };
3838
3839 struct ksz_device *ksz_switch_alloc(struct device *base, void *priv)
3840 {
3841         struct dsa_switch *ds;
3842         struct ksz_device *swdev;
3843
3844         ds = devm_kzalloc(base, sizeof(*ds), GFP_KERNEL);
3845         if (!ds)
3846                 return NULL;
3847
3848         ds->dev = base;
3849         ds->num_ports = DSA_MAX_PORTS;
3850         ds->ops = &ksz_switch_ops;
3851
3852         swdev = devm_kzalloc(base, sizeof(*swdev), GFP_KERNEL);
3853         if (!swdev)
3854                 return NULL;
3855
3856         ds->priv = swdev;
3857         swdev->dev = base;
3858
3859         swdev->ds = ds;
3860         swdev->priv = priv;
3861
3862         return swdev;
3863 }
3864 EXPORT_SYMBOL(ksz_switch_alloc);
3865
3866 /**
3867  * ksz_switch_shutdown - Shutdown routine for the switch device.
3868  * @dev: The switch device structure.
3869  *
3870  * This function is responsible for initiating a shutdown sequence for the
3871  * switch device. It invokes the reset operation defined in the device
3872  * operations, if available, to reset the switch. Subsequently, it calls the
3873  * DSA framework's shutdown function to ensure a proper shutdown of the DSA
3874  * switch.
3875  */
3876 void ksz_switch_shutdown(struct ksz_device *dev)
3877 {
3878         bool wol_enabled = false;
3879
3880         if (dev->dev_ops->wol_pre_shutdown)
3881                 dev->dev_ops->wol_pre_shutdown(dev, &wol_enabled);
3882
3883         if (dev->dev_ops->reset && !wol_enabled)
3884                 dev->dev_ops->reset(dev);
3885
3886         dsa_switch_shutdown(dev->ds);
3887 }
3888 EXPORT_SYMBOL(ksz_switch_shutdown);
3889
3890 static void ksz_parse_rgmii_delay(struct ksz_device *dev, int port_num,
3891                                   struct device_node *port_dn)
3892 {
3893         phy_interface_t phy_mode = dev->ports[port_num].interface;
3894         int rx_delay = -1, tx_delay = -1;
3895
3896         if (!phy_interface_mode_is_rgmii(phy_mode))
3897                 return;
3898
3899         of_property_read_u32(port_dn, "rx-internal-delay-ps", &rx_delay);
3900         of_property_read_u32(port_dn, "tx-internal-delay-ps", &tx_delay);
3901
3902         if (rx_delay == -1 && tx_delay == -1) {
3903                 dev_warn(dev->dev,
3904                          "Port %d interpreting RGMII delay settings based on \"phy-mode\" property, "
3905                          "please update device tree to specify \"rx-internal-delay-ps\" and "
3906                          "\"tx-internal-delay-ps\"",
3907                          port_num);
3908
3909                 if (phy_mode == PHY_INTERFACE_MODE_RGMII_RXID ||
3910                     phy_mode == PHY_INTERFACE_MODE_RGMII_ID)
3911                         rx_delay = 2000;
3912
3913                 if (phy_mode == PHY_INTERFACE_MODE_RGMII_TXID ||
3914                     phy_mode == PHY_INTERFACE_MODE_RGMII_ID)
3915                         tx_delay = 2000;
3916         }
3917
3918         if (rx_delay < 0)
3919                 rx_delay = 0;
3920         if (tx_delay < 0)
3921                 tx_delay = 0;
3922
3923         dev->ports[port_num].rgmii_rx_val = rx_delay;
3924         dev->ports[port_num].rgmii_tx_val = tx_delay;
3925 }
3926
3927 /**
3928  * ksz_drive_strength_to_reg() - Convert drive strength value to corresponding
3929  *                               register value.
3930  * @array:      The array of drive strength values to search.
3931  * @array_size: The size of the array.
3932  * @microamp:   The drive strength value in microamp to be converted.
3933  *
3934  * This function searches the array of drive strength values for the given
3935  * microamp value and returns the corresponding register value for that drive.
3936  *
3937  * Returns: If found, the corresponding register value for that drive strength
3938  * is returned. Otherwise, -EINVAL is returned indicating an invalid value.
3939  */
3940 static int ksz_drive_strength_to_reg(const struct ksz_drive_strength *array,
3941                                      size_t array_size, int microamp)
3942 {
3943         int i;
3944
3945         for (i = 0; i < array_size; i++) {
3946                 if (array[i].microamp == microamp)
3947                         return array[i].reg_val;
3948         }
3949
3950         return -EINVAL;
3951 }
3952
3953 /**
3954  * ksz_drive_strength_error() - Report invalid drive strength value
3955  * @dev:        ksz device
3956  * @array:      The array of drive strength values to search.
3957  * @array_size: The size of the array.
3958  * @microamp:   Invalid drive strength value in microamp
3959  *
3960  * This function logs an error message when an unsupported drive strength value
3961  * is detected. It lists out all the supported drive strength values for
3962  * reference in the error message.
3963  */
3964 static void ksz_drive_strength_error(struct ksz_device *dev,
3965                                      const struct ksz_drive_strength *array,
3966                                      size_t array_size, int microamp)
3967 {
3968         char supported_values[100];
3969         size_t remaining_size;
3970         int added_len;
3971         char *ptr;
3972         int i;
3973
3974         remaining_size = sizeof(supported_values);
3975         ptr = supported_values;
3976
3977         for (i = 0; i < array_size; i++) {
3978                 added_len = snprintf(ptr, remaining_size,
3979                                      i == 0 ? "%d" : ", %d", array[i].microamp);
3980
3981                 if (added_len >= remaining_size)
3982                         break;
3983
3984                 ptr += added_len;
3985                 remaining_size -= added_len;
3986         }
3987
3988         dev_err(dev->dev, "Invalid drive strength %d, supported values are %s\n",
3989                 microamp, supported_values);
3990 }
3991
3992 /**
3993  * ksz9477_drive_strength_write() - Set the drive strength for specific KSZ9477
3994  *                                  chip variants.
3995  * @dev:       ksz device
3996  * @props:     Array of drive strength properties to be applied
3997  * @num_props: Number of properties in the array
3998  *
3999  * This function configures the drive strength for various KSZ9477 chip variants
4000  * based on the provided properties. It handles chip-specific nuances and
4001  * ensures only valid drive strengths are written to the respective chip.
4002  *
4003  * Return: 0 on successful configuration, a negative error code on failure.
4004  */
4005 static int ksz9477_drive_strength_write(struct ksz_device *dev,
4006                                         struct ksz_driver_strength_prop *props,
4007                                         int num_props)
4008 {
4009         size_t array_size = ARRAY_SIZE(ksz9477_drive_strengths);
4010         int i, ret, reg;
4011         u8 mask = 0;
4012         u8 val = 0;
4013
4014         if (props[KSZ_DRIVER_STRENGTH_IO].value != -1)
4015                 dev_warn(dev->dev, "%s is not supported by this chip variant\n",
4016                          props[KSZ_DRIVER_STRENGTH_IO].name);
4017
4018         if (dev->chip_id == KSZ8795_CHIP_ID ||
4019             dev->chip_id == KSZ8794_CHIP_ID ||
4020             dev->chip_id == KSZ8765_CHIP_ID)
4021                 reg = KSZ8795_REG_SW_CTRL_20;
4022         else
4023                 reg = KSZ9477_REG_SW_IO_STRENGTH;
4024
4025         for (i = 0; i < num_props; i++) {
4026                 if (props[i].value == -1)
4027                         continue;
4028
4029                 ret = ksz_drive_strength_to_reg(ksz9477_drive_strengths,
4030                                                 array_size, props[i].value);
4031                 if (ret < 0) {
4032                         ksz_drive_strength_error(dev, ksz9477_drive_strengths,
4033                                                  array_size, props[i].value);
4034                         return ret;
4035                 }
4036
4037                 mask |= SW_DRIVE_STRENGTH_M << props[i].offset;
4038                 val |= ret << props[i].offset;
4039         }
4040
4041         return ksz_rmw8(dev, reg, mask, val);
4042 }
4043
4044 /**
4045  * ksz8830_drive_strength_write() - Set the drive strength configuration for
4046  *                                  KSZ8830 compatible chip variants.
4047  * @dev:       ksz device
4048  * @props:     Array of drive strength properties to be set
4049  * @num_props: Number of properties in the array
4050  *
4051  * This function applies the specified drive strength settings to KSZ8830 chip
4052  * variants (KSZ8873, KSZ8863).
4053  * It ensures the configurations align with what the chip variant supports and
4054  * warns or errors out on unsupported settings.
4055  *
4056  * Return: 0 on success, error code otherwise
4057  */
4058 static int ksz8830_drive_strength_write(struct ksz_device *dev,
4059                                         struct ksz_driver_strength_prop *props,
4060                                         int num_props)
4061 {
4062         size_t array_size = ARRAY_SIZE(ksz8830_drive_strengths);
4063         int microamp;
4064         int i, ret;
4065
4066         for (i = 0; i < num_props; i++) {
4067                 if (props[i].value == -1 || i == KSZ_DRIVER_STRENGTH_IO)
4068                         continue;
4069
4070                 dev_warn(dev->dev, "%s is not supported by this chip variant\n",
4071                          props[i].name);
4072         }
4073
4074         microamp = props[KSZ_DRIVER_STRENGTH_IO].value;
4075         ret = ksz_drive_strength_to_reg(ksz8830_drive_strengths, array_size,
4076                                         microamp);
4077         if (ret < 0) {
4078                 ksz_drive_strength_error(dev, ksz8830_drive_strengths,
4079                                          array_size, microamp);
4080                 return ret;
4081         }
4082
4083         return ksz_rmw8(dev, KSZ8873_REG_GLOBAL_CTRL_12,
4084                         KSZ8873_DRIVE_STRENGTH_16MA, ret);
4085 }
4086
4087 /**
4088  * ksz_parse_drive_strength() - Extract and apply drive strength configurations
4089  *                              from device tree properties.
4090  * @dev:        ksz device
4091  *
4092  * This function reads the specified drive strength properties from the
4093  * device tree, validates against the supported chip variants, and sets
4094  * them accordingly. An error should be critical here, as the drive strength
4095  * settings are crucial for EMI compliance.
4096  *
4097  * Return: 0 on success, error code otherwise
4098  */
4099 static int ksz_parse_drive_strength(struct ksz_device *dev)
4100 {
4101         struct ksz_driver_strength_prop of_props[] = {
4102                 [KSZ_DRIVER_STRENGTH_HI] = {
4103                         .name = "microchip,hi-drive-strength-microamp",
4104                         .offset = SW_HI_SPEED_DRIVE_STRENGTH_S,
4105                         .value = -1,
4106                 },
4107                 [KSZ_DRIVER_STRENGTH_LO] = {
4108                         .name = "microchip,lo-drive-strength-microamp",
4109                         .offset = SW_LO_SPEED_DRIVE_STRENGTH_S,
4110                         .value = -1,
4111                 },
4112                 [KSZ_DRIVER_STRENGTH_IO] = {
4113                         .name = "microchip,io-drive-strength-microamp",
4114                         .offset = 0, /* don't care */
4115                         .value = -1,
4116                 },
4117         };
4118         struct device_node *np = dev->dev->of_node;
4119         bool have_any_prop = false;
4120         int i, ret;
4121
4122         for (i = 0; i < ARRAY_SIZE(of_props); i++) {
4123                 ret = of_property_read_u32(np, of_props[i].name,
4124                                            &of_props[i].value);
4125                 if (ret && ret != -EINVAL)
4126                         dev_warn(dev->dev, "Failed to read %s\n",
4127                                  of_props[i].name);
4128                 if (ret)
4129                         continue;
4130
4131                 have_any_prop = true;
4132         }
4133
4134         if (!have_any_prop)
4135                 return 0;
4136
4137         switch (dev->chip_id) {
4138         case KSZ8830_CHIP_ID:
4139                 return ksz8830_drive_strength_write(dev, of_props,
4140                                                     ARRAY_SIZE(of_props));
4141         case KSZ8795_CHIP_ID:
4142         case KSZ8794_CHIP_ID:
4143         case KSZ8765_CHIP_ID:
4144         case KSZ8563_CHIP_ID:
4145         case KSZ9477_CHIP_ID:
4146         case KSZ9563_CHIP_ID:
4147         case KSZ9567_CHIP_ID:
4148         case KSZ9893_CHIP_ID:
4149         case KSZ9896_CHIP_ID:
4150         case KSZ9897_CHIP_ID:
4151                 return ksz9477_drive_strength_write(dev, of_props,
4152                                                     ARRAY_SIZE(of_props));
4153         default:
4154                 for (i = 0; i < ARRAY_SIZE(of_props); i++) {
4155                         if (of_props[i].value == -1)
4156                                 continue;
4157
4158                         dev_warn(dev->dev, "%s is not supported by this chip variant\n",
4159                                  of_props[i].name);
4160                 }
4161         }
4162
4163         return 0;
4164 }
4165
4166 int ksz_switch_register(struct ksz_device *dev)
4167 {
4168         const struct ksz_chip_data *info;
4169         struct device_node *port, *ports;
4170         phy_interface_t interface;
4171         unsigned int port_num;
4172         int ret;
4173         int i;
4174
4175         dev->reset_gpio = devm_gpiod_get_optional(dev->dev, "reset",
4176                                                   GPIOD_OUT_LOW);
4177         if (IS_ERR(dev->reset_gpio))
4178                 return PTR_ERR(dev->reset_gpio);
4179
4180         if (dev->reset_gpio) {
4181                 gpiod_set_value_cansleep(dev->reset_gpio, 1);
4182                 usleep_range(10000, 12000);
4183                 gpiod_set_value_cansleep(dev->reset_gpio, 0);
4184                 msleep(100);
4185         }
4186
4187         mutex_init(&dev->dev_mutex);
4188         mutex_init(&dev->regmap_mutex);
4189         mutex_init(&dev->alu_mutex);
4190         mutex_init(&dev->vlan_mutex);
4191
4192         ret = ksz_switch_detect(dev);
4193         if (ret)
4194                 return ret;
4195
4196         info = ksz_lookup_info(dev->chip_id);
4197         if (!info)
4198                 return -ENODEV;
4199
4200         /* Update the compatible info with the probed one */
4201         dev->info = info;
4202
4203         dev_info(dev->dev, "found switch: %s, rev %i\n",
4204                  dev->info->dev_name, dev->chip_rev);
4205
4206         ret = ksz_check_device_id(dev);
4207         if (ret)
4208                 return ret;
4209
4210         dev->dev_ops = dev->info->ops;
4211
4212         ret = dev->dev_ops->init(dev);
4213         if (ret)
4214                 return ret;
4215
4216         dev->ports = devm_kzalloc(dev->dev,
4217                                   dev->info->port_cnt * sizeof(struct ksz_port),
4218                                   GFP_KERNEL);
4219         if (!dev->ports)
4220                 return -ENOMEM;
4221
4222         for (i = 0; i < dev->info->port_cnt; i++) {
4223                 spin_lock_init(&dev->ports[i].mib.stats64_lock);
4224                 mutex_init(&dev->ports[i].mib.cnt_mutex);
4225                 dev->ports[i].mib.counters =
4226                         devm_kzalloc(dev->dev,
4227                                      sizeof(u64) * (dev->info->mib_cnt + 1),
4228                                      GFP_KERNEL);
4229                 if (!dev->ports[i].mib.counters)
4230                         return -ENOMEM;
4231
4232                 dev->ports[i].ksz_dev = dev;
4233                 dev->ports[i].num = i;
4234         }
4235
4236         /* set the real number of ports */
4237         dev->ds->num_ports = dev->info->port_cnt;
4238
4239         /* Host port interface will be self detected, or specifically set in
4240          * device tree.
4241          */
4242         for (port_num = 0; port_num < dev->info->port_cnt; ++port_num)
4243                 dev->ports[port_num].interface = PHY_INTERFACE_MODE_NA;
4244         if (dev->dev->of_node) {
4245                 ret = ksz_parse_drive_strength(dev);
4246                 if (ret)
4247                         return ret;
4248
4249                 ret = of_get_phy_mode(dev->dev->of_node, &interface);
4250                 if (ret == 0)
4251                         dev->compat_interface = interface;
4252                 ports = of_get_child_by_name(dev->dev->of_node, "ethernet-ports");
4253                 if (!ports)
4254                         ports = of_get_child_by_name(dev->dev->of_node, "ports");
4255                 if (ports) {
4256                         for_each_available_child_of_node(ports, port) {
4257                                 if (of_property_read_u32(port, "reg",
4258                                                          &port_num))
4259                                         continue;
4260                                 if (!(dev->port_mask & BIT(port_num))) {
4261                                         of_node_put(port);
4262                                         of_node_put(ports);
4263                                         return -EINVAL;
4264                                 }
4265                                 of_get_phy_mode(port,
4266                                                 &dev->ports[port_num].interface);
4267
4268                                 ksz_parse_rgmii_delay(dev, port_num, port);
4269                         }
4270                         of_node_put(ports);
4271                 }
4272                 dev->synclko_125 = of_property_read_bool(dev->dev->of_node,
4273                                                          "microchip,synclko-125");
4274                 dev->synclko_disable = of_property_read_bool(dev->dev->of_node,
4275                                                              "microchip,synclko-disable");
4276                 if (dev->synclko_125 && dev->synclko_disable) {
4277                         dev_err(dev->dev, "inconsistent synclko settings\n");
4278                         return -EINVAL;
4279                 }
4280
4281                 dev->wakeup_source = of_property_read_bool(dev->dev->of_node,
4282                                                            "wakeup-source");
4283         }
4284
4285         ret = dsa_register_switch(dev->ds);
4286         if (ret) {
4287                 dev->dev_ops->exit(dev);
4288                 return ret;
4289         }
4290
4291         /* Read MIB counters every 30 seconds to avoid overflow. */
4292         dev->mib_read_interval = msecs_to_jiffies(5000);
4293
4294         /* Start the MIB timer. */
4295         schedule_delayed_work(&dev->mib_read, 0);
4296
4297         return ret;
4298 }
4299 EXPORT_SYMBOL(ksz_switch_register);
4300
4301 void ksz_switch_remove(struct ksz_device *dev)
4302 {
4303         /* timer started */
4304         if (dev->mib_read_interval) {
4305                 dev->mib_read_interval = 0;
4306                 cancel_delayed_work_sync(&dev->mib_read);
4307         }
4308
4309         dev->dev_ops->exit(dev);
4310         dsa_unregister_switch(dev->ds);
4311
4312         if (dev->reset_gpio)
4313                 gpiod_set_value_cansleep(dev->reset_gpio, 1);
4314
4315 }
4316 EXPORT_SYMBOL(ksz_switch_remove);
4317
4318 MODULE_AUTHOR("Woojung Huh <[email protected]>");
4319 MODULE_DESCRIPTION("Microchip KSZ Series Switch DSA Driver");
4320 MODULE_LICENSE("GPL");