drivers/hid/hid-dr.c

   1 // SPDX-License-Identifier: GPL-2.0-or-later
   2 /*
   3  * Force feedback support for DragonRise Inc. game controllers
   4  *
   5  * From what I have gathered, these devices are mass produced in China and are
   6  * distributed under several vendors. They often share the same design as
   7  * the original PlayStation DualShock controller.
   8  *
   9  * 0079:0006 "DragonRise Inc.   Generic   USB  Joystick  "
  10  *  - tested with a Tesun USB-703 game controller.
  11  *
  12  * Copyright (c) 2009 Richard Walmsley <[email protected]>
  13  */
  14
  15 /*
  16  */
  17
  18 #include <linux/input.h>
  19 #include <linux/slab.h>
  20 #include <linux/hid.h>
  21 #include <linux/module.h>
  22
  23 #include "hid-ids.h"
  24
  25 #ifdef CONFIG_DRAGONRISE_FF
  26
  27 struct drff_device {
  28         struct hid_report *report;
  29 };
  30
  31 static int drff_play(struct input_dev *dev, void *data,
  32                                  struct ff_effect *effect)
  33 {
  34         struct hid_device *hid = input_get_drvdata(dev);
  35         struct drff_device *drff = data;
  36         int strong, weak;
  37
  38         strong = effect->u.rumble.strong_magnitude;
  39         weak = effect->u.rumble.weak_magnitude;
  40
  41         dbg_hid("called with 0x%04x 0x%04x", strong, weak);
  42
  43         if (strong || weak) {
  44                 strong = strong * 0xff / 0xffff;
  45                 weak = weak * 0xff / 0xffff;
  46
  47                 /* While reverse engineering this device, I found that when
  48                    this value is set, it causes the strong rumble to function
  49                    at a near maximum speed, so we'll bypass it. */
  50                 if (weak == 0x0a)
  51                         weak = 0x0b;
  52
  53                 drff->report->field[0]->value[0] = 0x51;
  54                 drff->report->field[0]->value[1] = 0x00;
  55                 drff->report->field[0]->value[2] = weak;
  56                 drff->report->field[0]->value[4] = strong;
  57                 hid_hw_request(hid, drff->report, HID_REQ_SET_REPORT);
  58
  59                 drff->report->field[0]->value[0] = 0xfa;
  60                 drff->report->field[0]->value[1] = 0xfe;
  61         } else {
  62                 drff->report->field[0]->value[0] = 0xf3;
  63                 drff->report->field[0]->value[1] = 0x00;
  64         }
  65
  66         drff->report->field[0]->value[2] = 0x00;
  67         drff->report->field[0]->value[4] = 0x00;
  68         dbg_hid("running with 0x%02x 0x%02x", strong, weak);
  69         hid_hw_request(hid, drff->report, HID_REQ_SET_REPORT);
  70
  71         return 0;
  72 }
  73
  74 static int drff_init(struct hid_device *hid)
  75 {
  76         struct drff_device *drff;
  77         struct hid_report *report;
  78         struct hid_input *hidinput = list_first_entry(&hid->inputs,
  79                                                 struct hid_input, list);
  80         struct list_head *report_list =
  81                         &hid->report_enum[HID_OUTPUT_REPORT].report_list;
  82         struct input_dev *dev = hidinput->input;
  83         int error;
  84
  85         if (list_empty(report_list)) {
  86                 hid_err(hid, "no output reports found\n");
  87                 return -ENODEV;
  88         }
  89
  90         report = list_first_entry(report_list, struct hid_report, list);
  91         if (report->maxfield < 1) {
  92                 hid_err(hid, "no fields in the report\n");
  93                 return -ENODEV;
  94         }
  95
  96         if (report->field[0]->report_count < 7) {
  97                 hid_err(hid, "not enough values in the field\n");
  98                 return -ENODEV;
  99         }
 100
 101         drff = kzalloc(sizeof(struct drff_device), GFP_KERNEL);
 102         if (!drff)
 103                 return -ENOMEM;
 104
 105         set_bit(FF_RUMBLE, dev->ffbit);
 106
 107         error = input_ff_create_memless(dev, drff, drff_play);
 108         if (error) {
 109                 kfree(drff);
 110                 return error;
 111         }
 112
 113         drff->report = report;
 114         drff->report->field[0]->value[0] = 0xf3;
 115         drff->report->field[0]->value[1] = 0x00;
 116         drff->report->field[0]->value[2] = 0x00;
 117         drff->report->field[0]->value[3] = 0x00;
 118         drff->report->field[0]->value[4] = 0x00;
 119         drff->report->field[0]->value[5] = 0x00;
 120         drff->report->field[0]->value[6] = 0x00;
 121         hid_hw_request(hid, drff->report, HID_REQ_SET_REPORT);
 122
 123         hid_info(hid, "Force Feedback for DragonRise Inc. "
 124                  "game controllers by Richard Walmsley <[email protected]>\n");
 125
 126         return 0;
 127 }
 128 #else
 129 static inline int drff_init(struct hid_device *hid)
 130 {
 131         return 0;
 132 }
 133 #endif
 134
 135 /*
 136  * The original descriptor of joystick with PID 0x0011, represented by DVTech PC
 137  * JS19. It seems both copied from another device and a result of confusion
 138  * either about the specification or about the program used to create the
 139  * descriptor. In any case, it's a wonder it works on Windows.
 140  *
 141  *  Usage Page (Desktop),             ; Generic desktop controls (01h)
 142  *  Usage (Joystick),                 ; Joystick (04h, application collection)
 143  *  Collection (Application),
 144  *    Collection (Logical),
 145  *      Report Size (8),
 146  *      Report Count (5),
 147  *      Logical Minimum (0),
 148  *      Logical Maximum (255),
 149  *      Physical Minimum (0),
 150  *      Physical Maximum (255),
 151  *      Usage (X),                    ; X (30h, dynamic value)
 152  *      Usage (X),                    ; X (30h, dynamic value)
 153  *      Usage (X),                    ; X (30h, dynamic value)
 154  *      Usage (X),                    ; X (30h, dynamic value)
 155  *      Usage (Y),                    ; Y (31h, dynamic value)
 156  *      Input (Variable),
 157  *      Report Size (4),
 158  *      Report Count (1),
 159  *      Logical Maximum (7),
 160  *      Physical Maximum (315),
 161  *      Unit (Degrees),
 162  *      Usage (00h),
 163  *      Input (Variable, Null State),
 164  *      Unit,
 165  *      Report Size (1),
 166  *      Report Count (10),
 167  *      Logical Maximum (1),
 168  *      Physical Maximum (1),
 169  *      Usage Page (Button),          ; Button (09h)
 170  *      Usage Minimum (01h),
 171  *      Usage Maximum (0Ah),
 172  *      Input (Variable),
 173  *      Usage Page (FF00h),           ; FF00h, vendor-defined
 174  *      Report Size (1),
 175  *      Report Count (10),
 176  *      Logical Maximum (1),
 177  *      Physical Maximum (1),
 178  *      Usage (01h),
 179  *      Input (Variable),
 180  *    End Collection,
 181  *    Collection (Logical),
 182  *      Report Size (8),
 183  *      Report Count (4),
 184  *      Physical Maximum (255),
 185  *      Logical Maximum (255),
 186  *      Usage (02h),
 187  *      Output (Variable),
 188  *    End Collection,
 189  *  End Collection
 190  */
 191
 192 /* Size of the original descriptor of the PID 0x0011 joystick */
 193 #define PID0011_RDESC_ORIG_SIZE 101
 194
 195 /* Fixed report descriptor for PID 0x011 joystick */
 196 static __u8 pid0011_rdesc_fixed[] = {
 197         0x05, 0x01,         /*  Usage Page (Desktop),           */
 198         0x09, 0x04,         /*  Usage (Joystick),               */
 199         0xA1, 0x01,         /*  Collection (Application),       */
 200         0xA1, 0x02,         /*      Collection (Logical),       */
 201         0x14,               /*          Logical Minimum (0),    */
 202         0x75, 0x08,         /*          Report Size (8),        */
 203         0x95, 0x03,         /*          Report Count (3),       */
 204         0x81, 0x01,         /*          Input (Constant),       */
 205         0x26, 0xFF, 0x00,   /*          Logical Maximum (255),  */
 206         0x95, 0x02,         /*          Report Count (2),       */
 207         0x09, 0x30,         /*          Usage (X),              */
 208         0x09, 0x31,         /*          Usage (Y),              */
 209         0x81, 0x02,         /*          Input (Variable),       */
 210         0x75, 0x01,         /*          Report Size (1),        */
 211         0x95, 0x04,         /*          Report Count (4),       */
 212         0x81, 0x01,         /*          Input (Constant),       */
 213         0x25, 0x01,         /*          Logical Maximum (1),    */
 214         0x95, 0x0A,         /*          Report Count (10),      */
 215         0x05, 0x09,         /*          Usage Page (Button),    */
 216         0x19, 0x01,         /*          Usage Minimum (01h),    */
 217         0x29, 0x0A,         /*          Usage Maximum (0Ah),    */
 218         0x81, 0x02,         /*          Input (Variable),       */
 219         0x95, 0x0A,         /*          Report Count (10),      */
 220         0x81, 0x01,         /*          Input (Constant),       */
 221         0xC0,               /*      End Collection,             */
 222         0xC0                /*  End Collection                  */
 223 };
 224
 225 static __u8 *dr_report_fixup(struct hid_device *hdev, __u8 *rdesc,
 226                                 unsigned int *rsize)
 227 {
 228         switch (hdev->product) {
 229         case 0x0011:
 230                 if (*rsize == PID0011_RDESC_ORIG_SIZE) {
 231                         rdesc = pid0011_rdesc_fixed;
 232                         *rsize = sizeof(pid0011_rdesc_fixed);
 233                 }
 234                 break;
 235         }
 236         return rdesc;
 237 }
 238
 239 #define map_abs(c)      hid_map_usage(hi, usage, bit, max, EV_ABS, (c))
 240 #define map_rel(c)      hid_map_usage(hi, usage, bit, max, EV_REL, (c))
 241
 242 static int dr_input_mapping(struct hid_device *hdev, struct hid_input *hi,
 243                             struct hid_field *field, struct hid_usage *usage,
 244                             unsigned long **bit, int *max)
 245 {
 246         switch (usage->hid) {
 247         /*
 248          * revert to the old hid-input behavior where axes
 249          * can be randomly assigned when hid->usage is reused.
 250          */
 251         case HID_GD_X: case HID_GD_Y: case HID_GD_Z:
 252         case HID_GD_RX: case HID_GD_RY: case HID_GD_RZ:
 253                 if (field->flags & HID_MAIN_ITEM_RELATIVE)
 254                         map_rel(usage->hid & 0xf);
 255                 else
 256                         map_abs(usage->hid & 0xf);
 257                 return 1;
 258         }
 259
 260         return 0;
 261 }
 262
 263 static int dr_probe(struct hid_device *hdev, const struct hid_device_id *id)
 264 {
 265         int ret;
 266
 267         dev_dbg(&hdev->dev, "DragonRise Inc. HID hardware probe...");
 268
 269         ret = hid_parse(hdev);
 270         if (ret) {
 271                 hid_err(hdev, "parse failed\n");
 272                 goto err;
 273         }
 274
 275         ret = hid_hw_start(hdev, HID_CONNECT_DEFAULT & ~HID_CONNECT_FF);
 276         if (ret) {
 277                 hid_err(hdev, "hw start failed\n");
 278                 goto err;
 279         }
 280
 281         switch (hdev->product) {
 282         case 0x0006:
 283                 ret = drff_init(hdev);
 284                 if (ret) {
 285                         dev_err(&hdev->dev, "force feedback init failed\n");
 286                         hid_hw_stop(hdev);
 287                         goto err;
 288                 }
 289                 break;
 290         }
 291
 292         return 0;
 293 err:
 294         return ret;
 295 }
 296
 297 static const struct hid_device_id dr_devices[] = {
 298         { HID_USB_DEVICE(USB_VENDOR_ID_DRAGONRISE, 0x0006),  },
 299         { HID_USB_DEVICE(USB_VENDOR_ID_DRAGONRISE, 0x0011),  },
 300         { }
 301 };
 302 MODULE_DEVICE_TABLE(hid, dr_devices);
 303
 304 static struct hid_driver dr_driver = {
 305         .name = "dragonrise",
 306         .id_table = dr_devices,
 307         .report_fixup = dr_report_fixup,
 308         .probe = dr_probe,
 309         .input_mapping = dr_input_mapping,
 310 };
 311 module_hid_driver(dr_driver);
 312
 313 MODULE_LICENSE("GPL");