2 * BSS client mode implementation
4 * Copyright 2004, Instant802 Networks, Inc.
5 * Copyright 2005, Devicescape Software, Inc.
8 * Copyright 2013-2014 Intel Mobile Communications GmbH
9 * Copyright (C) 2015 Intel Deutschland GmbH
11 * This program is free software; you can redistribute it and/or modify
12 * it under the terms of the GNU General Public License version 2 as
13 * published by the Free Software Foundation.
16 #include <linux/delay.h>
17 #include <linux/if_ether.h>
18 #include <linux/skbuff.h>
19 #include <linux/if_arp.h>
20 #include <linux/etherdevice.h>
21 #include <linux/moduleparam.h>
22 #include <linux/rtnetlink.h>
23 #include <linux/crc32.h>
24 #include <linux/slab.h>
25 #include <linux/export.h>
26 #include <net/mac80211.h>
27 #include <asm/unaligned.h>
29 #include "ieee80211_i.h"
30 #include "driver-ops.h"
34 #define IEEE80211_AUTH_TIMEOUT (HZ / 5)
35 #define IEEE80211_AUTH_TIMEOUT_LONG (HZ / 2)
36 #define IEEE80211_AUTH_TIMEOUT_SHORT (HZ / 10)
37 #define IEEE80211_AUTH_MAX_TRIES 3
38 #define IEEE80211_AUTH_WAIT_ASSOC (HZ * 5)
39 #define IEEE80211_ASSOC_TIMEOUT (HZ / 5)
40 #define IEEE80211_ASSOC_TIMEOUT_LONG (HZ / 2)
41 #define IEEE80211_ASSOC_TIMEOUT_SHORT (HZ / 10)
42 #define IEEE80211_ASSOC_MAX_TRIES 3
44 static int max_nullfunc_tries = 2;
45 module_param(max_nullfunc_tries, int, 0644);
46 MODULE_PARM_DESC(max_nullfunc_tries,
47 "Maximum nullfunc tx tries before disconnecting (reason 4).");
49 static int max_probe_tries = 5;
50 module_param(max_probe_tries, int, 0644);
51 MODULE_PARM_DESC(max_probe_tries,
52 "Maximum probe tries before disconnecting (reason 4).");
55 * Beacon loss timeout is calculated as N frames times the
56 * advertised beacon interval. This may need to be somewhat
57 * higher than what hardware might detect to account for
58 * delays in the host processing frames. But since we also
59 * probe on beacon miss before declaring the connection lost
60 * default to what we want.
62 static int beacon_loss_count = 7;
63 module_param(beacon_loss_count, int, 0644);
64 MODULE_PARM_DESC(beacon_loss_count,
65 "Number of beacon intervals before we decide beacon was lost.");
68 * Time the connection can be idle before we probe
69 * it to see if we can still talk to the AP.
71 #define IEEE80211_CONNECTION_IDLE_TIME (30 * HZ)
73 * Time we wait for a probe response after sending
74 * a probe request because of beacon loss or for
75 * checking the connection still works.
77 static int probe_wait_ms = 500;
78 module_param(probe_wait_ms, int, 0644);
79 MODULE_PARM_DESC(probe_wait_ms,
80 "Maximum time(ms) to wait for probe response"
81 " before disconnecting (reason 4).");
84 * How many Beacon frames need to have been used in average signal strength
85 * before starting to indicate signal change events.
87 #define IEEE80211_SIGNAL_AVE_MIN_COUNT 4
90 * We can have multiple work items (and connection probing)
91 * scheduling this timer, but we need to take care to only
92 * reschedule it when it should fire _earlier_ than it was
93 * asked for before, or if it's not pending right now. This
94 * function ensures that. Note that it then is required to
95 * run this function for all timeouts after the first one
96 * has happened -- the work that runs from this timer will
99 static void run_again(struct ieee80211_sub_if_data *sdata,
100 unsigned long timeout)
102 sdata_assert_lock(sdata);
104 if (!timer_pending(&sdata->u.mgd.timer) ||
105 time_before(timeout, sdata->u.mgd.timer.expires))
106 mod_timer(&sdata->u.mgd.timer, timeout);
109 void ieee80211_sta_reset_beacon_monitor(struct ieee80211_sub_if_data *sdata)
111 if (sdata->vif.driver_flags & IEEE80211_VIF_BEACON_FILTER)
114 if (ieee80211_hw_check(&sdata->local->hw, CONNECTION_MONITOR))
117 mod_timer(&sdata->u.mgd.bcn_mon_timer,
118 round_jiffies_up(jiffies + sdata->u.mgd.beacon_timeout));
121 void ieee80211_sta_reset_conn_monitor(struct ieee80211_sub_if_data *sdata)
123 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
125 if (unlikely(!sdata->u.mgd.associated))
128 ifmgd->probe_send_count = 0;
130 if (ieee80211_hw_check(&sdata->local->hw, CONNECTION_MONITOR))
133 mod_timer(&sdata->u.mgd.conn_mon_timer,
134 round_jiffies_up(jiffies + IEEE80211_CONNECTION_IDLE_TIME));
137 static int ecw2cw(int ecw)
139 return (1 << ecw) - 1;
143 ieee80211_determine_chantype(struct ieee80211_sub_if_data *sdata,
144 struct ieee80211_supported_band *sband,
145 struct ieee80211_channel *channel,
146 const struct ieee80211_ht_cap *ht_cap,
147 const struct ieee80211_ht_operation *ht_oper,
148 const struct ieee80211_vht_operation *vht_oper,
149 struct cfg80211_chan_def *chandef, bool tracking)
151 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
152 struct cfg80211_chan_def vht_chandef;
153 struct ieee80211_sta_ht_cap sta_ht_cap;
156 memcpy(&sta_ht_cap, &sband->ht_cap, sizeof(sta_ht_cap));
157 ieee80211_apply_htcap_overrides(sdata, &sta_ht_cap);
159 chandef->chan = channel;
160 chandef->width = NL80211_CHAN_WIDTH_20_NOHT;
161 chandef->center_freq1 = channel->center_freq;
162 chandef->center_freq2 = 0;
164 if (!ht_cap || !ht_oper || !sta_ht_cap.ht_supported) {
165 ret = IEEE80211_STA_DISABLE_HT | IEEE80211_STA_DISABLE_VHT;
169 chandef->width = NL80211_CHAN_WIDTH_20;
171 if (!(ht_cap->cap_info &
172 cpu_to_le16(IEEE80211_HT_CAP_SUP_WIDTH_20_40))) {
173 ret = IEEE80211_STA_DISABLE_40MHZ;
174 vht_chandef = *chandef;
178 ht_cfreq = ieee80211_channel_to_frequency(ht_oper->primary_chan,
180 /* check that channel matches the right operating channel */
181 if (!tracking && channel->center_freq != ht_cfreq) {
183 * It's possible that some APs are confused here;
184 * Netgear WNDR3700 sometimes reports 4 higher than
185 * the actual channel in association responses, but
186 * since we look at probe response/beacon data here
190 "Wrong control channel: center-freq: %d ht-cfreq: %d ht->primary_chan: %d band: %d - Disabling HT\n",
191 channel->center_freq, ht_cfreq,
192 ht_oper->primary_chan, channel->band);
193 ret = IEEE80211_STA_DISABLE_HT | IEEE80211_STA_DISABLE_VHT;
197 /* check 40 MHz support, if we have it */
198 if (sta_ht_cap.cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40) {
199 switch (ht_oper->ht_param & IEEE80211_HT_PARAM_CHA_SEC_OFFSET) {
200 case IEEE80211_HT_PARAM_CHA_SEC_ABOVE:
201 chandef->width = NL80211_CHAN_WIDTH_40;
202 chandef->center_freq1 += 10;
204 case IEEE80211_HT_PARAM_CHA_SEC_BELOW:
205 chandef->width = NL80211_CHAN_WIDTH_40;
206 chandef->center_freq1 -= 10;
210 /* 40 MHz (and 80 MHz) must be supported for VHT */
211 ret = IEEE80211_STA_DISABLE_VHT;
212 /* also mark 40 MHz disabled */
213 ret |= IEEE80211_STA_DISABLE_40MHZ;
217 if (!vht_oper || !sband->vht_cap.vht_supported) {
218 ret = IEEE80211_STA_DISABLE_VHT;
222 vht_chandef.chan = channel;
223 vht_chandef.center_freq1 =
224 ieee80211_channel_to_frequency(vht_oper->center_freq_seg1_idx,
226 vht_chandef.center_freq2 = 0;
228 switch (vht_oper->chan_width) {
229 case IEEE80211_VHT_CHANWIDTH_USE_HT:
230 vht_chandef.width = chandef->width;
231 vht_chandef.center_freq1 = chandef->center_freq1;
233 case IEEE80211_VHT_CHANWIDTH_80MHZ:
234 vht_chandef.width = NL80211_CHAN_WIDTH_80;
236 case IEEE80211_VHT_CHANWIDTH_160MHZ:
237 vht_chandef.width = NL80211_CHAN_WIDTH_160;
239 case IEEE80211_VHT_CHANWIDTH_80P80MHZ:
240 vht_chandef.width = NL80211_CHAN_WIDTH_80P80;
241 vht_chandef.center_freq2 =
242 ieee80211_channel_to_frequency(
243 vht_oper->center_freq_seg2_idx,
247 if (!(ifmgd->flags & IEEE80211_STA_DISABLE_VHT))
249 "AP VHT operation IE has invalid channel width (%d), disable VHT\n",
250 vht_oper->chan_width);
251 ret = IEEE80211_STA_DISABLE_VHT;
255 if (!cfg80211_chandef_valid(&vht_chandef)) {
256 if (!(ifmgd->flags & IEEE80211_STA_DISABLE_VHT))
258 "AP VHT information is invalid, disable VHT\n");
259 ret = IEEE80211_STA_DISABLE_VHT;
263 if (cfg80211_chandef_identical(chandef, &vht_chandef)) {
268 if (!cfg80211_chandef_compatible(chandef, &vht_chandef)) {
269 if (!(ifmgd->flags & IEEE80211_STA_DISABLE_VHT))
271 "AP VHT information doesn't match HT, disable VHT\n");
272 ret = IEEE80211_STA_DISABLE_VHT;
276 *chandef = vht_chandef;
282 * When tracking the current AP, don't do any further checks if the
283 * new chandef is identical to the one we're currently using for the
284 * connection. This keeps us from playing ping-pong with regulatory,
285 * without it the following can happen (for example):
286 * - connect to an AP with 80 MHz, world regdom allows 80 MHz
287 * - AP advertises regdom US
288 * - CRDA loads regdom US with 80 MHz prohibited (old database)
289 * - the code below detects an unsupported channel, downgrades, and
290 * we disconnect from the AP in the caller
291 * - disconnect causes CRDA to reload world regdomain and the game
293 * (see https://bugzilla.kernel.org/show_bug.cgi?id=70881)
295 * It seems possible that there are still scenarios with CSA or real
296 * bandwidth changes where a this could happen, but those cases are
297 * less common and wouldn't completely prevent using the AP.
300 cfg80211_chandef_identical(chandef, &sdata->vif.bss_conf.chandef))
303 /* don't print the message below for VHT mismatch if VHT is disabled */
304 if (ret & IEEE80211_STA_DISABLE_VHT)
305 vht_chandef = *chandef;
308 * Ignore the DISABLED flag when we're already connected and only
309 * tracking the APs beacon for bandwidth changes - otherwise we
310 * might get disconnected here if we connect to an AP, update our
311 * regulatory information based on the AP's country IE and the
312 * information we have is wrong/outdated and disables the channel
313 * that we're actually using for the connection to the AP.
315 while (!cfg80211_chandef_usable(sdata->local->hw.wiphy, chandef,
317 IEEE80211_CHAN_DISABLED)) {
318 if (WARN_ON(chandef->width == NL80211_CHAN_WIDTH_20_NOHT)) {
319 ret = IEEE80211_STA_DISABLE_HT |
320 IEEE80211_STA_DISABLE_VHT;
324 ret |= ieee80211_chandef_downgrade(chandef);
327 if (chandef->width != vht_chandef.width && !tracking)
329 "capabilities/regulatory prevented using AP HT/VHT configuration, downgraded\n");
331 WARN_ON_ONCE(!cfg80211_chandef_valid(chandef));
335 static int ieee80211_config_bw(struct ieee80211_sub_if_data *sdata,
336 struct sta_info *sta,
337 const struct ieee80211_ht_cap *ht_cap,
338 const struct ieee80211_ht_operation *ht_oper,
339 const struct ieee80211_vht_operation *vht_oper,
340 const u8 *bssid, u32 *changed)
342 struct ieee80211_local *local = sdata->local;
343 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
344 struct ieee80211_supported_band *sband;
345 struct ieee80211_channel *chan;
346 struct cfg80211_chan_def chandef;
349 enum ieee80211_sta_rx_bandwidth new_sta_bw;
352 /* if HT was/is disabled, don't track any bandwidth changes */
353 if (ifmgd->flags & IEEE80211_STA_DISABLE_HT || !ht_oper)
356 /* don't check VHT if we associated as non-VHT station */
357 if (ifmgd->flags & IEEE80211_STA_DISABLE_VHT)
360 if (WARN_ON_ONCE(!sta))
364 * if bss configuration changed store the new one -
365 * this may be applicable even if channel is identical
367 ht_opmode = le16_to_cpu(ht_oper->operation_mode);
368 if (sdata->vif.bss_conf.ht_operation_mode != ht_opmode) {
369 *changed |= BSS_CHANGED_HT;
370 sdata->vif.bss_conf.ht_operation_mode = ht_opmode;
373 chan = sdata->vif.bss_conf.chandef.chan;
374 sband = local->hw.wiphy->bands[chan->band];
376 /* calculate new channel (type) based on HT/VHT operation IEs */
377 flags = ieee80211_determine_chantype(sdata, sband, chan,
378 ht_cap, ht_oper, vht_oper,
382 * Downgrade the new channel if we associated with restricted
383 * capabilities. For example, if we associated as a 20 MHz STA
384 * to a 40 MHz AP (due to regulatory, capabilities or config
385 * reasons) then switching to a 40 MHz channel now won't do us
386 * any good -- we couldn't use it with the AP.
388 if (ifmgd->flags & IEEE80211_STA_DISABLE_80P80MHZ &&
389 chandef.width == NL80211_CHAN_WIDTH_80P80)
390 flags |= ieee80211_chandef_downgrade(&chandef);
391 if (ifmgd->flags & IEEE80211_STA_DISABLE_160MHZ &&
392 chandef.width == NL80211_CHAN_WIDTH_160)
393 flags |= ieee80211_chandef_downgrade(&chandef);
394 if (ifmgd->flags & IEEE80211_STA_DISABLE_40MHZ &&
395 chandef.width > NL80211_CHAN_WIDTH_20)
396 flags |= ieee80211_chandef_downgrade(&chandef);
398 if (cfg80211_chandef_identical(&chandef, &sdata->vif.bss_conf.chandef))
402 "AP %pM changed bandwidth, new config is %d MHz, width %d (%d/%d MHz)\n",
403 ifmgd->bssid, chandef.chan->center_freq, chandef.width,
404 chandef.center_freq1, chandef.center_freq2);
406 if (flags != (ifmgd->flags & (IEEE80211_STA_DISABLE_HT |
407 IEEE80211_STA_DISABLE_VHT |
408 IEEE80211_STA_DISABLE_40MHZ |
409 IEEE80211_STA_DISABLE_80P80MHZ |
410 IEEE80211_STA_DISABLE_160MHZ)) ||
411 !cfg80211_chandef_valid(&chandef)) {
413 "AP %pM changed bandwidth in a way we can't support - disconnect\n",
418 switch (chandef.width) {
419 case NL80211_CHAN_WIDTH_20_NOHT:
420 case NL80211_CHAN_WIDTH_20:
421 new_sta_bw = IEEE80211_STA_RX_BW_20;
423 case NL80211_CHAN_WIDTH_40:
424 new_sta_bw = IEEE80211_STA_RX_BW_40;
426 case NL80211_CHAN_WIDTH_80:
427 new_sta_bw = IEEE80211_STA_RX_BW_80;
429 case NL80211_CHAN_WIDTH_80P80:
430 case NL80211_CHAN_WIDTH_160:
431 new_sta_bw = IEEE80211_STA_RX_BW_160;
437 if (new_sta_bw > sta->cur_max_bandwidth)
438 new_sta_bw = sta->cur_max_bandwidth;
440 if (new_sta_bw < sta->sta.bandwidth) {
441 sta->sta.bandwidth = new_sta_bw;
442 rate_control_rate_update(local, sband, sta,
443 IEEE80211_RC_BW_CHANGED);
446 ret = ieee80211_vif_change_bandwidth(sdata, &chandef, changed);
449 "AP %pM changed bandwidth to incompatible one - disconnect\n",
454 if (new_sta_bw > sta->sta.bandwidth) {
455 sta->sta.bandwidth = new_sta_bw;
456 rate_control_rate_update(local, sband, sta,
457 IEEE80211_RC_BW_CHANGED);
463 /* frame sending functions */
465 static void ieee80211_add_ht_ie(struct ieee80211_sub_if_data *sdata,
466 struct sk_buff *skb, u8 ap_ht_param,
467 struct ieee80211_supported_band *sband,
468 struct ieee80211_channel *channel,
469 enum ieee80211_smps_mode smps)
472 u32 flags = channel->flags;
474 struct ieee80211_sta_ht_cap ht_cap;
476 BUILD_BUG_ON(sizeof(ht_cap) != sizeof(sband->ht_cap));
478 memcpy(&ht_cap, &sband->ht_cap, sizeof(ht_cap));
479 ieee80211_apply_htcap_overrides(sdata, &ht_cap);
481 /* determine capability flags */
484 switch (ap_ht_param & IEEE80211_HT_PARAM_CHA_SEC_OFFSET) {
485 case IEEE80211_HT_PARAM_CHA_SEC_ABOVE:
486 if (flags & IEEE80211_CHAN_NO_HT40PLUS) {
487 cap &= ~IEEE80211_HT_CAP_SUP_WIDTH_20_40;
488 cap &= ~IEEE80211_HT_CAP_SGI_40;
491 case IEEE80211_HT_PARAM_CHA_SEC_BELOW:
492 if (flags & IEEE80211_CHAN_NO_HT40MINUS) {
493 cap &= ~IEEE80211_HT_CAP_SUP_WIDTH_20_40;
494 cap &= ~IEEE80211_HT_CAP_SGI_40;
500 * If 40 MHz was disabled associate as though we weren't
501 * capable of 40 MHz -- some broken APs will never fall
502 * back to trying to transmit in 20 MHz.
504 if (sdata->u.mgd.flags & IEEE80211_STA_DISABLE_40MHZ) {
505 cap &= ~IEEE80211_HT_CAP_SUP_WIDTH_20_40;
506 cap &= ~IEEE80211_HT_CAP_SGI_40;
509 /* set SM PS mode properly */
510 cap &= ~IEEE80211_HT_CAP_SM_PS;
512 case IEEE80211_SMPS_AUTOMATIC:
513 case IEEE80211_SMPS_NUM_MODES:
515 case IEEE80211_SMPS_OFF:
516 cap |= WLAN_HT_CAP_SM_PS_DISABLED <<
517 IEEE80211_HT_CAP_SM_PS_SHIFT;
519 case IEEE80211_SMPS_STATIC:
520 cap |= WLAN_HT_CAP_SM_PS_STATIC <<
521 IEEE80211_HT_CAP_SM_PS_SHIFT;
523 case IEEE80211_SMPS_DYNAMIC:
524 cap |= WLAN_HT_CAP_SM_PS_DYNAMIC <<
525 IEEE80211_HT_CAP_SM_PS_SHIFT;
529 /* reserve and fill IE */
530 pos = skb_put(skb, sizeof(struct ieee80211_ht_cap) + 2);
531 ieee80211_ie_build_ht_cap(pos, &ht_cap, cap);
534 /* This function determines vht capability flags for the association
536 * Note - the function may set the owner of the MU-MIMO capability
538 static void ieee80211_add_vht_ie(struct ieee80211_sub_if_data *sdata,
540 struct ieee80211_supported_band *sband,
541 struct ieee80211_vht_cap *ap_vht_cap)
543 struct ieee80211_local *local = sdata->local;
546 struct ieee80211_sta_vht_cap vht_cap;
547 u32 mask, ap_bf_sts, our_bf_sts;
549 BUILD_BUG_ON(sizeof(vht_cap) != sizeof(sband->vht_cap));
551 memcpy(&vht_cap, &sband->vht_cap, sizeof(vht_cap));
552 ieee80211_apply_vhtcap_overrides(sdata, &vht_cap);
554 /* determine capability flags */
557 if (sdata->u.mgd.flags & IEEE80211_STA_DISABLE_80P80MHZ) {
558 u32 bw = cap & IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_MASK;
560 cap &= ~IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_MASK;
561 if (bw == IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160MHZ ||
562 bw == IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160_80PLUS80MHZ)
563 cap |= IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160MHZ;
566 if (sdata->u.mgd.flags & IEEE80211_STA_DISABLE_160MHZ) {
567 cap &= ~IEEE80211_VHT_CAP_SHORT_GI_160;
568 cap &= ~IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_MASK;
572 * Some APs apparently get confused if our capabilities are better
573 * than theirs, so restrict what we advertise in the assoc request.
575 if (!(ap_vht_cap->vht_cap_info &
576 cpu_to_le32(IEEE80211_VHT_CAP_SU_BEAMFORMER_CAPABLE)))
577 cap &= ~(IEEE80211_VHT_CAP_SU_BEAMFORMEE_CAPABLE |
578 IEEE80211_VHT_CAP_MU_BEAMFORMEE_CAPABLE);
579 else if (!(ap_vht_cap->vht_cap_info &
580 cpu_to_le32(IEEE80211_VHT_CAP_MU_BEAMFORMER_CAPABLE)))
581 cap &= ~IEEE80211_VHT_CAP_MU_BEAMFORMEE_CAPABLE;
584 * If some other vif is using the MU-MIMO capablity we cannot associate
585 * using MU-MIMO - this will lead to contradictions in the group-id
587 * Ownership is defined since association request, in order to avoid
588 * simultaneous associations with MU-MIMO.
590 if (cap & IEEE80211_VHT_CAP_MU_BEAMFORMEE_CAPABLE) {
591 bool disable_mu_mimo = false;
592 struct ieee80211_sub_if_data *other;
594 list_for_each_entry_rcu(other, &local->interfaces, list) {
595 if (other->flags & IEEE80211_SDATA_MU_MIMO_OWNER) {
596 disable_mu_mimo = true;
601 cap &= ~IEEE80211_VHT_CAP_MU_BEAMFORMEE_CAPABLE;
603 sdata->flags |= IEEE80211_SDATA_MU_MIMO_OWNER;
606 mask = IEEE80211_VHT_CAP_BEAMFORMEE_STS_MASK;
608 ap_bf_sts = le32_to_cpu(ap_vht_cap->vht_cap_info) & mask;
609 our_bf_sts = cap & mask;
611 if (ap_bf_sts < our_bf_sts) {
616 /* reserve and fill IE */
617 pos = skb_put(skb, sizeof(struct ieee80211_vht_cap) + 2);
618 ieee80211_ie_build_vht_cap(pos, &vht_cap, cap);
621 static void ieee80211_send_assoc(struct ieee80211_sub_if_data *sdata)
623 struct ieee80211_local *local = sdata->local;
624 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
625 struct ieee80211_mgd_assoc_data *assoc_data = ifmgd->assoc_data;
627 struct ieee80211_mgmt *mgmt;
629 size_t offset = 0, noffset;
630 int i, count, rates_len, supp_rates_len, shift;
632 struct ieee80211_supported_band *sband;
633 struct ieee80211_chanctx_conf *chanctx_conf;
634 struct ieee80211_channel *chan;
635 u32 rate_flags, rates = 0;
637 sdata_assert_lock(sdata);
640 chanctx_conf = rcu_dereference(sdata->vif.chanctx_conf);
641 if (WARN_ON(!chanctx_conf)) {
645 chan = chanctx_conf->def.chan;
646 rate_flags = ieee80211_chandef_rate_flags(&chanctx_conf->def);
648 sband = local->hw.wiphy->bands[chan->band];
649 shift = ieee80211_vif_get_shift(&sdata->vif);
651 if (assoc_data->supp_rates_len) {
653 * Get all rates supported by the device and the AP as
654 * some APs don't like getting a superset of their rates
655 * in the association request (e.g. D-Link DAP 1353 in
658 rates_len = ieee80211_parse_bitrates(&chanctx_conf->def, sband,
659 assoc_data->supp_rates,
660 assoc_data->supp_rates_len,
664 * In case AP not provide any supported rates information
665 * before association, we send information element(s) with
666 * all rates that we support.
669 for (i = 0; i < sband->n_bitrates; i++) {
670 if ((rate_flags & sband->bitrates[i].flags)
678 skb = alloc_skb(local->hw.extra_tx_headroom +
679 sizeof(*mgmt) + /* bit too much but doesn't matter */
680 2 + assoc_data->ssid_len + /* SSID */
681 4 + rates_len + /* (extended) rates */
682 4 + /* power capability */
683 2 + 2 * sband->n_channels + /* supported channels */
684 2 + sizeof(struct ieee80211_ht_cap) + /* HT */
685 2 + sizeof(struct ieee80211_vht_cap) + /* VHT */
686 assoc_data->ie_len + /* extra IEs */
692 skb_reserve(skb, local->hw.extra_tx_headroom);
694 capab = WLAN_CAPABILITY_ESS;
696 if (sband->band == IEEE80211_BAND_2GHZ) {
697 capab |= WLAN_CAPABILITY_SHORT_SLOT_TIME;
698 capab |= WLAN_CAPABILITY_SHORT_PREAMBLE;
701 if (assoc_data->capability & WLAN_CAPABILITY_PRIVACY)
702 capab |= WLAN_CAPABILITY_PRIVACY;
704 if ((assoc_data->capability & WLAN_CAPABILITY_SPECTRUM_MGMT) &&
705 ieee80211_hw_check(&local->hw, SPECTRUM_MGMT))
706 capab |= WLAN_CAPABILITY_SPECTRUM_MGMT;
708 if (ifmgd->flags & IEEE80211_STA_ENABLE_RRM)
709 capab |= WLAN_CAPABILITY_RADIO_MEASURE;
711 mgmt = (struct ieee80211_mgmt *) skb_put(skb, 24);
713 memcpy(mgmt->da, assoc_data->bss->bssid, ETH_ALEN);
714 memcpy(mgmt->sa, sdata->vif.addr, ETH_ALEN);
715 memcpy(mgmt->bssid, assoc_data->bss->bssid, ETH_ALEN);
717 if (!is_zero_ether_addr(assoc_data->prev_bssid)) {
719 mgmt->frame_control = cpu_to_le16(IEEE80211_FTYPE_MGMT |
720 IEEE80211_STYPE_REASSOC_REQ);
721 mgmt->u.reassoc_req.capab_info = cpu_to_le16(capab);
722 mgmt->u.reassoc_req.listen_interval =
723 cpu_to_le16(local->hw.conf.listen_interval);
724 memcpy(mgmt->u.reassoc_req.current_ap, assoc_data->prev_bssid,
728 mgmt->frame_control = cpu_to_le16(IEEE80211_FTYPE_MGMT |
729 IEEE80211_STYPE_ASSOC_REQ);
730 mgmt->u.assoc_req.capab_info = cpu_to_le16(capab);
731 mgmt->u.assoc_req.listen_interval =
732 cpu_to_le16(local->hw.conf.listen_interval);
736 pos = skb_put(skb, 2 + assoc_data->ssid_len);
737 *pos++ = WLAN_EID_SSID;
738 *pos++ = assoc_data->ssid_len;
739 memcpy(pos, assoc_data->ssid, assoc_data->ssid_len);
741 /* add all rates which were marked to be used above */
742 supp_rates_len = rates_len;
743 if (supp_rates_len > 8)
746 pos = skb_put(skb, supp_rates_len + 2);
747 *pos++ = WLAN_EID_SUPP_RATES;
748 *pos++ = supp_rates_len;
751 for (i = 0; i < sband->n_bitrates; i++) {
752 if (BIT(i) & rates) {
753 int rate = DIV_ROUND_UP(sband->bitrates[i].bitrate,
761 if (rates_len > count) {
762 pos = skb_put(skb, rates_len - count + 2);
763 *pos++ = WLAN_EID_EXT_SUPP_RATES;
764 *pos++ = rates_len - count;
766 for (i++; i < sband->n_bitrates; i++) {
767 if (BIT(i) & rates) {
769 rate = DIV_ROUND_UP(sband->bitrates[i].bitrate,
776 if (capab & WLAN_CAPABILITY_SPECTRUM_MGMT ||
777 capab & WLAN_CAPABILITY_RADIO_MEASURE) {
778 pos = skb_put(skb, 4);
779 *pos++ = WLAN_EID_PWR_CAPABILITY;
781 *pos++ = 0; /* min tx power */
783 *pos++ = ieee80211_chandef_max_power(&chanctx_conf->def);
786 if (capab & WLAN_CAPABILITY_SPECTRUM_MGMT) {
787 /* TODO: get this in reg domain format */
788 pos = skb_put(skb, 2 * sband->n_channels + 2);
789 *pos++ = WLAN_EID_SUPPORTED_CHANNELS;
790 *pos++ = 2 * sband->n_channels;
791 for (i = 0; i < sband->n_channels; i++) {
792 *pos++ = ieee80211_frequency_to_channel(
793 sband->channels[i].center_freq);
794 *pos++ = 1; /* one channel in the subband*/
798 /* if present, add any custom IEs that go before HT */
799 if (assoc_data->ie_len) {
800 static const u8 before_ht[] = {
803 WLAN_EID_EXT_SUPP_RATES,
804 WLAN_EID_PWR_CAPABILITY,
805 WLAN_EID_SUPPORTED_CHANNELS,
808 WLAN_EID_RRM_ENABLED_CAPABILITIES,
809 WLAN_EID_MOBILITY_DOMAIN,
810 WLAN_EID_FAST_BSS_TRANSITION, /* reassoc only */
811 WLAN_EID_RIC_DATA, /* reassoc only */
812 WLAN_EID_SUPPORTED_REGULATORY_CLASSES,
814 static const u8 after_ric[] = {
815 WLAN_EID_SUPPORTED_REGULATORY_CLASSES,
816 WLAN_EID_HT_CAPABILITY,
817 WLAN_EID_BSS_COEX_2040,
818 WLAN_EID_EXT_CAPABILITY,
819 WLAN_EID_QOS_TRAFFIC_CAPA,
820 WLAN_EID_TIM_BCAST_REQ,
821 WLAN_EID_INTERWORKING,
822 /* 60GHz doesn't happen right now */
823 WLAN_EID_VHT_CAPABILITY,
824 WLAN_EID_OPMODE_NOTIF,
827 noffset = ieee80211_ie_split_ric(assoc_data->ie,
830 ARRAY_SIZE(before_ht),
832 ARRAY_SIZE(after_ric),
834 pos = skb_put(skb, noffset - offset);
835 memcpy(pos, assoc_data->ie + offset, noffset - offset);
839 if (WARN_ON_ONCE((ifmgd->flags & IEEE80211_STA_DISABLE_HT) &&
840 !(ifmgd->flags & IEEE80211_STA_DISABLE_VHT)))
841 ifmgd->flags |= IEEE80211_STA_DISABLE_VHT;
843 if (!(ifmgd->flags & IEEE80211_STA_DISABLE_HT))
844 ieee80211_add_ht_ie(sdata, skb, assoc_data->ap_ht_param,
845 sband, chan, sdata->smps_mode);
847 /* if present, add any custom IEs that go before VHT */
848 if (assoc_data->ie_len) {
849 static const u8 before_vht[] = {
852 WLAN_EID_EXT_SUPP_RATES,
853 WLAN_EID_PWR_CAPABILITY,
854 WLAN_EID_SUPPORTED_CHANNELS,
857 WLAN_EID_RRM_ENABLED_CAPABILITIES,
858 WLAN_EID_MOBILITY_DOMAIN,
859 WLAN_EID_SUPPORTED_REGULATORY_CLASSES,
860 WLAN_EID_HT_CAPABILITY,
861 WLAN_EID_BSS_COEX_2040,
862 WLAN_EID_EXT_CAPABILITY,
863 WLAN_EID_QOS_TRAFFIC_CAPA,
864 WLAN_EID_TIM_BCAST_REQ,
865 WLAN_EID_INTERWORKING,
868 /* RIC already taken above, so no need to handle here anymore */
869 noffset = ieee80211_ie_split(assoc_data->ie, assoc_data->ie_len,
870 before_vht, ARRAY_SIZE(before_vht),
872 pos = skb_put(skb, noffset - offset);
873 memcpy(pos, assoc_data->ie + offset, noffset - offset);
877 if (!(ifmgd->flags & IEEE80211_STA_DISABLE_VHT))
878 ieee80211_add_vht_ie(sdata, skb, sband,
879 &assoc_data->ap_vht_cap);
881 /* if present, add any custom non-vendor IEs that go after HT */
882 if (assoc_data->ie_len) {
883 noffset = ieee80211_ie_split_vendor(assoc_data->ie,
886 pos = skb_put(skb, noffset - offset);
887 memcpy(pos, assoc_data->ie + offset, noffset - offset);
891 if (assoc_data->wmm) {
892 if (assoc_data->uapsd) {
893 qos_info = ifmgd->uapsd_queues;
894 qos_info |= (ifmgd->uapsd_max_sp_len <<
895 IEEE80211_WMM_IE_STA_QOSINFO_SP_SHIFT);
900 pos = ieee80211_add_wmm_info_ie(skb_put(skb, 9), qos_info);
903 /* add any remaining custom (i.e. vendor specific here) IEs */
904 if (assoc_data->ie_len) {
905 noffset = assoc_data->ie_len;
906 pos = skb_put(skb, noffset - offset);
907 memcpy(pos, assoc_data->ie + offset, noffset - offset);
910 drv_mgd_prepare_tx(local, sdata);
912 IEEE80211_SKB_CB(skb)->flags |= IEEE80211_TX_INTFL_DONT_ENCRYPT;
913 if (ieee80211_hw_check(&local->hw, REPORTS_TX_ACK_STATUS))
914 IEEE80211_SKB_CB(skb)->flags |= IEEE80211_TX_CTL_REQ_TX_STATUS |
915 IEEE80211_TX_INTFL_MLME_CONN_TX;
916 ieee80211_tx_skb(sdata, skb);
919 void ieee80211_send_pspoll(struct ieee80211_local *local,
920 struct ieee80211_sub_if_data *sdata)
922 struct ieee80211_pspoll *pspoll;
925 skb = ieee80211_pspoll_get(&local->hw, &sdata->vif);
929 pspoll = (struct ieee80211_pspoll *) skb->data;
930 pspoll->frame_control |= cpu_to_le16(IEEE80211_FCTL_PM);
932 IEEE80211_SKB_CB(skb)->flags |= IEEE80211_TX_INTFL_DONT_ENCRYPT;
933 ieee80211_tx_skb(sdata, skb);
936 void ieee80211_send_nullfunc(struct ieee80211_local *local,
937 struct ieee80211_sub_if_data *sdata,
941 struct ieee80211_hdr_3addr *nullfunc;
942 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
944 skb = ieee80211_nullfunc_get(&local->hw, &sdata->vif);
948 nullfunc = (struct ieee80211_hdr_3addr *) skb->data;
950 nullfunc->frame_control |= cpu_to_le16(IEEE80211_FCTL_PM);
952 IEEE80211_SKB_CB(skb)->flags |= IEEE80211_TX_INTFL_DONT_ENCRYPT |
953 IEEE80211_TX_INTFL_OFFCHAN_TX_OK;
955 if (ieee80211_hw_check(&local->hw, REPORTS_TX_ACK_STATUS))
956 IEEE80211_SKB_CB(skb)->flags |= IEEE80211_TX_CTL_REQ_TX_STATUS;
958 if (ifmgd->flags & IEEE80211_STA_CONNECTION_POLL)
959 IEEE80211_SKB_CB(skb)->flags |= IEEE80211_TX_CTL_USE_MINRATE;
961 ieee80211_tx_skb(sdata, skb);
964 static void ieee80211_send_4addr_nullfunc(struct ieee80211_local *local,
965 struct ieee80211_sub_if_data *sdata)
968 struct ieee80211_hdr *nullfunc;
971 if (WARN_ON(sdata->vif.type != NL80211_IFTYPE_STATION))
974 skb = dev_alloc_skb(local->hw.extra_tx_headroom + 30);
978 skb_reserve(skb, local->hw.extra_tx_headroom);
980 nullfunc = (struct ieee80211_hdr *) skb_put(skb, 30);
981 memset(nullfunc, 0, 30);
982 fc = cpu_to_le16(IEEE80211_FTYPE_DATA | IEEE80211_STYPE_NULLFUNC |
983 IEEE80211_FCTL_FROMDS | IEEE80211_FCTL_TODS);
984 nullfunc->frame_control = fc;
985 memcpy(nullfunc->addr1, sdata->u.mgd.bssid, ETH_ALEN);
986 memcpy(nullfunc->addr2, sdata->vif.addr, ETH_ALEN);
987 memcpy(nullfunc->addr3, sdata->u.mgd.bssid, ETH_ALEN);
988 memcpy(nullfunc->addr4, sdata->vif.addr, ETH_ALEN);
990 IEEE80211_SKB_CB(skb)->flags |= IEEE80211_TX_INTFL_DONT_ENCRYPT;
991 ieee80211_tx_skb(sdata, skb);
994 /* spectrum management related things */
995 static void ieee80211_chswitch_work(struct work_struct *work)
997 struct ieee80211_sub_if_data *sdata =
998 container_of(work, struct ieee80211_sub_if_data, u.mgd.chswitch_work);
999 struct ieee80211_local *local = sdata->local;
1000 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
1003 if (!ieee80211_sdata_running(sdata))
1007 mutex_lock(&local->mtx);
1008 mutex_lock(&local->chanctx_mtx);
1010 if (!ifmgd->associated)
1013 if (!sdata->vif.csa_active)
1017 * using reservation isn't immediate as it may be deferred until later
1018 * with multi-vif. once reservation is complete it will re-schedule the
1019 * work with no reserved_chanctx so verify chandef to check if it
1020 * completed successfully
1023 if (sdata->reserved_chanctx) {
1025 * with multi-vif csa driver may call ieee80211_csa_finish()
1026 * many times while waiting for other interfaces to use their
1029 if (sdata->reserved_ready)
1032 ret = ieee80211_vif_use_reserved_context(sdata);
1035 "failed to use reserved channel context, disconnecting (err=%d)\n",
1037 ieee80211_queue_work(&sdata->local->hw,
1038 &ifmgd->csa_connection_drop_work);
1045 if (!cfg80211_chandef_identical(&sdata->vif.bss_conf.chandef,
1046 &sdata->csa_chandef)) {
1048 "failed to finalize channel switch, disconnecting\n");
1049 ieee80211_queue_work(&sdata->local->hw,
1050 &ifmgd->csa_connection_drop_work);
1054 /* XXX: shouldn't really modify cfg80211-owned data! */
1055 ifmgd->associated->channel = sdata->csa_chandef.chan;
1057 ifmgd->csa_waiting_bcn = true;
1059 ieee80211_sta_reset_beacon_monitor(sdata);
1060 ieee80211_sta_reset_conn_monitor(sdata);
1063 mutex_unlock(&local->chanctx_mtx);
1064 mutex_unlock(&local->mtx);
1065 sdata_unlock(sdata);
1068 static void ieee80211_chswitch_post_beacon(struct ieee80211_sub_if_data *sdata)
1070 struct ieee80211_local *local = sdata->local;
1071 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
1074 sdata_assert_lock(sdata);
1076 WARN_ON(!sdata->vif.csa_active);
1078 if (sdata->csa_block_tx) {
1079 ieee80211_wake_vif_queues(local, sdata,
1080 IEEE80211_QUEUE_STOP_REASON_CSA);
1081 sdata->csa_block_tx = false;
1084 sdata->vif.csa_active = false;
1085 ifmgd->csa_waiting_bcn = false;
1087 ret = drv_post_channel_switch(sdata);
1090 "driver post channel switch failed, disconnecting\n");
1091 ieee80211_queue_work(&local->hw,
1092 &ifmgd->csa_connection_drop_work);
1096 cfg80211_ch_switch_notify(sdata->dev, &sdata->reserved_chandef);
1099 void ieee80211_chswitch_done(struct ieee80211_vif *vif, bool success)
1101 struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif);
1102 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
1104 trace_api_chswitch_done(sdata, success);
1107 "driver channel switch failed, disconnecting\n");
1108 ieee80211_queue_work(&sdata->local->hw,
1109 &ifmgd->csa_connection_drop_work);
1111 ieee80211_queue_work(&sdata->local->hw, &ifmgd->chswitch_work);
1114 EXPORT_SYMBOL(ieee80211_chswitch_done);
1116 static void ieee80211_chswitch_timer(unsigned long data)
1118 struct ieee80211_sub_if_data *sdata =
1119 (struct ieee80211_sub_if_data *) data;
1121 ieee80211_queue_work(&sdata->local->hw, &sdata->u.mgd.chswitch_work);
1125 ieee80211_sta_process_chanswitch(struct ieee80211_sub_if_data *sdata,
1126 u64 timestamp, u32 device_timestamp,
1127 struct ieee802_11_elems *elems,
1130 struct ieee80211_local *local = sdata->local;
1131 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
1132 struct cfg80211_bss *cbss = ifmgd->associated;
1133 struct ieee80211_chanctx_conf *conf;
1134 struct ieee80211_chanctx *chanctx;
1135 enum ieee80211_band current_band;
1136 struct ieee80211_csa_ie csa_ie;
1137 struct ieee80211_channel_switch ch_switch;
1140 sdata_assert_lock(sdata);
1145 if (local->scanning)
1148 /* disregard subsequent announcements if we are already processing */
1149 if (sdata->vif.csa_active)
1152 current_band = cbss->channel->band;
1153 memset(&csa_ie, 0, sizeof(csa_ie));
1154 res = ieee80211_parse_ch_switch_ie(sdata, elems, current_band,
1156 ifmgd->associated->bssid, &csa_ie);
1158 ieee80211_queue_work(&local->hw,
1159 &ifmgd->csa_connection_drop_work);
1163 if (!cfg80211_chandef_usable(local->hw.wiphy, &csa_ie.chandef,
1164 IEEE80211_CHAN_DISABLED)) {
1166 "AP %pM switches to unsupported channel (%d MHz, width:%d, CF1/2: %d/%d MHz), disconnecting\n",
1167 ifmgd->associated->bssid,
1168 csa_ie.chandef.chan->center_freq,
1169 csa_ie.chandef.width, csa_ie.chandef.center_freq1,
1170 csa_ie.chandef.center_freq2);
1171 ieee80211_queue_work(&local->hw,
1172 &ifmgd->csa_connection_drop_work);
1176 if (cfg80211_chandef_identical(&csa_ie.chandef,
1177 &sdata->vif.bss_conf.chandef)) {
1178 if (ifmgd->csa_ignored_same_chan)
1181 "AP %pM tries to chanswitch to same channel, ignore\n",
1182 ifmgd->associated->bssid);
1183 ifmgd->csa_ignored_same_chan = true;
1188 * Drop all TDLS peers - either we disconnect or move to a different
1189 * channel from this point on. There's no telling what our peer will do.
1190 * The TDLS WIDER_BW scenario is also problematic, as peers might now
1191 * have an incompatible wider chandef.
1193 ieee80211_teardown_tdls_peers(sdata);
1195 mutex_lock(&local->mtx);
1196 mutex_lock(&local->chanctx_mtx);
1197 conf = rcu_dereference_protected(sdata->vif.chanctx_conf,
1198 lockdep_is_held(&local->chanctx_mtx));
1201 "no channel context assigned to vif?, disconnecting\n");
1202 goto drop_connection;
1205 chanctx = container_of(conf, struct ieee80211_chanctx, conf);
1207 if (local->use_chanctx &&
1208 !ieee80211_hw_check(&local->hw, CHANCTX_STA_CSA)) {
1210 "driver doesn't support chan-switch with channel contexts\n");
1211 goto drop_connection;
1214 ch_switch.timestamp = timestamp;
1215 ch_switch.device_timestamp = device_timestamp;
1216 ch_switch.block_tx = csa_ie.mode;
1217 ch_switch.chandef = csa_ie.chandef;
1218 ch_switch.count = csa_ie.count;
1220 if (drv_pre_channel_switch(sdata, &ch_switch)) {
1222 "preparing for channel switch failed, disconnecting\n");
1223 goto drop_connection;
1226 res = ieee80211_vif_reserve_chanctx(sdata, &csa_ie.chandef,
1227 chanctx->mode, false);
1230 "failed to reserve channel context for channel switch, disconnecting (err=%d)\n",
1232 goto drop_connection;
1234 mutex_unlock(&local->chanctx_mtx);
1236 sdata->vif.csa_active = true;
1237 sdata->csa_chandef = csa_ie.chandef;
1238 sdata->csa_block_tx = csa_ie.mode;
1239 ifmgd->csa_ignored_same_chan = false;
1241 if (sdata->csa_block_tx)
1242 ieee80211_stop_vif_queues(local, sdata,
1243 IEEE80211_QUEUE_STOP_REASON_CSA);
1244 mutex_unlock(&local->mtx);
1246 cfg80211_ch_switch_started_notify(sdata->dev, &csa_ie.chandef,
1249 if (local->ops->channel_switch) {
1250 /* use driver's channel switch callback */
1251 drv_channel_switch(local, sdata, &ch_switch);
1255 /* channel switch handled in software */
1256 if (csa_ie.count <= 1)
1257 ieee80211_queue_work(&local->hw, &ifmgd->chswitch_work);
1259 mod_timer(&ifmgd->chswitch_timer,
1260 TU_TO_EXP_TIME((csa_ie.count - 1) *
1261 cbss->beacon_interval));
1264 ieee80211_queue_work(&local->hw, &ifmgd->csa_connection_drop_work);
1265 mutex_unlock(&local->chanctx_mtx);
1266 mutex_unlock(&local->mtx);
1270 ieee80211_find_80211h_pwr_constr(struct ieee80211_sub_if_data *sdata,
1271 struct ieee80211_channel *channel,
1272 const u8 *country_ie, u8 country_ie_len,
1273 const u8 *pwr_constr_elem,
1274 int *chan_pwr, int *pwr_reduction)
1276 struct ieee80211_country_ie_triplet *triplet;
1277 int chan = ieee80211_frequency_to_channel(channel->center_freq);
1278 int i, chan_increment;
1279 bool have_chan_pwr = false;
1282 if (country_ie_len % 2 || country_ie_len < IEEE80211_COUNTRY_IE_MIN_LEN)
1285 triplet = (void *)(country_ie + 3);
1286 country_ie_len -= 3;
1288 switch (channel->band) {
1292 case IEEE80211_BAND_2GHZ:
1293 case IEEE80211_BAND_60GHZ:
1296 case IEEE80211_BAND_5GHZ:
1302 while (country_ie_len >= 3) {
1303 u8 first_channel = triplet->chans.first_channel;
1305 if (first_channel >= IEEE80211_COUNTRY_EXTENSION_ID)
1308 for (i = 0; i < triplet->chans.num_channels; i++) {
1309 if (first_channel + i * chan_increment == chan) {
1310 have_chan_pwr = true;
1311 *chan_pwr = triplet->chans.max_power;
1320 country_ie_len -= 3;
1323 if (have_chan_pwr && pwr_constr_elem)
1324 *pwr_reduction = *pwr_constr_elem;
1328 return have_chan_pwr;
1331 static void ieee80211_find_cisco_dtpc(struct ieee80211_sub_if_data *sdata,
1332 struct ieee80211_channel *channel,
1333 const u8 *cisco_dtpc_ie,
1336 /* From practical testing, the first data byte of the DTPC element
1337 * seems to contain the requested dBm level, and the CLI on Cisco
1338 * APs clearly state the range is -127 to 127 dBm, which indicates
1339 * a signed byte, although it seemingly never actually goes negative.
1340 * The other byte seems to always be zero.
1342 *pwr_level = (__s8)cisco_dtpc_ie[4];
1345 static u32 ieee80211_handle_pwr_constr(struct ieee80211_sub_if_data *sdata,
1346 struct ieee80211_channel *channel,
1347 struct ieee80211_mgmt *mgmt,
1348 const u8 *country_ie, u8 country_ie_len,
1349 const u8 *pwr_constr_ie,
1350 const u8 *cisco_dtpc_ie)
1352 bool has_80211h_pwr = false, has_cisco_pwr = false;
1353 int chan_pwr = 0, pwr_reduction_80211h = 0;
1354 int pwr_level_cisco, pwr_level_80211h;
1356 __le16 capab = mgmt->u.probe_resp.capab_info;
1359 (capab & cpu_to_le16(WLAN_CAPABILITY_SPECTRUM_MGMT) ||
1360 capab & cpu_to_le16(WLAN_CAPABILITY_RADIO_MEASURE))) {
1361 has_80211h_pwr = ieee80211_find_80211h_pwr_constr(
1362 sdata, channel, country_ie, country_ie_len,
1363 pwr_constr_ie, &chan_pwr, &pwr_reduction_80211h);
1365 max_t(int, 0, chan_pwr - pwr_reduction_80211h);
1368 if (cisco_dtpc_ie) {
1369 ieee80211_find_cisco_dtpc(
1370 sdata, channel, cisco_dtpc_ie, &pwr_level_cisco);
1371 has_cisco_pwr = true;
1374 if (!has_80211h_pwr && !has_cisco_pwr)
1377 /* If we have both 802.11h and Cisco DTPC, apply both limits
1378 * by picking the smallest of the two power levels advertised.
1380 if (has_80211h_pwr &&
1381 (!has_cisco_pwr || pwr_level_80211h <= pwr_level_cisco)) {
1382 new_ap_level = pwr_level_80211h;
1384 if (sdata->ap_power_level == new_ap_level)
1388 "Limiting TX power to %d (%d - %d) dBm as advertised by %pM\n",
1389 pwr_level_80211h, chan_pwr, pwr_reduction_80211h,
1390 sdata->u.mgd.bssid);
1391 } else { /* has_cisco_pwr is always true here. */
1392 new_ap_level = pwr_level_cisco;
1394 if (sdata->ap_power_level == new_ap_level)
1398 "Limiting TX power to %d dBm as advertised by %pM\n",
1399 pwr_level_cisco, sdata->u.mgd.bssid);
1402 sdata->ap_power_level = new_ap_level;
1403 if (__ieee80211_recalc_txpower(sdata))
1404 return BSS_CHANGED_TXPOWER;
1409 static void ieee80211_enable_ps(struct ieee80211_local *local,
1410 struct ieee80211_sub_if_data *sdata)
1412 struct ieee80211_conf *conf = &local->hw.conf;
1415 * If we are scanning right now then the parameters will
1416 * take effect when scan finishes.
1418 if (local->scanning)
1421 if (conf->dynamic_ps_timeout > 0 &&
1422 !ieee80211_hw_check(&local->hw, SUPPORTS_DYNAMIC_PS)) {
1423 mod_timer(&local->dynamic_ps_timer, jiffies +
1424 msecs_to_jiffies(conf->dynamic_ps_timeout));
1426 if (ieee80211_hw_check(&local->hw, PS_NULLFUNC_STACK))
1427 ieee80211_send_nullfunc(local, sdata, true);
1429 if (ieee80211_hw_check(&local->hw, PS_NULLFUNC_STACK) &&
1430 ieee80211_hw_check(&local->hw, REPORTS_TX_ACK_STATUS))
1433 conf->flags |= IEEE80211_CONF_PS;
1434 ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_PS);
1438 static void ieee80211_change_ps(struct ieee80211_local *local)
1440 struct ieee80211_conf *conf = &local->hw.conf;
1442 if (local->ps_sdata) {
1443 ieee80211_enable_ps(local, local->ps_sdata);
1444 } else if (conf->flags & IEEE80211_CONF_PS) {
1445 conf->flags &= ~IEEE80211_CONF_PS;
1446 ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_PS);
1447 del_timer_sync(&local->dynamic_ps_timer);
1448 cancel_work_sync(&local->dynamic_ps_enable_work);
1452 static bool ieee80211_powersave_allowed(struct ieee80211_sub_if_data *sdata)
1454 struct ieee80211_if_managed *mgd = &sdata->u.mgd;
1455 struct sta_info *sta = NULL;
1456 bool authorized = false;
1458 if (!mgd->powersave)
1464 if (!mgd->associated)
1467 if (mgd->flags & IEEE80211_STA_CONNECTION_POLL)
1470 if (!mgd->have_beacon)
1474 sta = sta_info_get(sdata, mgd->bssid);
1476 authorized = test_sta_flag(sta, WLAN_STA_AUTHORIZED);
1482 /* need to hold RTNL or interface lock */
1483 void ieee80211_recalc_ps(struct ieee80211_local *local)
1485 struct ieee80211_sub_if_data *sdata, *found = NULL;
1489 if (!ieee80211_hw_check(&local->hw, SUPPORTS_PS)) {
1490 local->ps_sdata = NULL;
1494 list_for_each_entry(sdata, &local->interfaces, list) {
1495 if (!ieee80211_sdata_running(sdata))
1497 if (sdata->vif.type == NL80211_IFTYPE_AP) {
1498 /* If an AP vif is found, then disable PS
1499 * by setting the count to zero thereby setting
1505 if (sdata->vif.type != NL80211_IFTYPE_STATION)
1511 if (count == 1 && ieee80211_powersave_allowed(found)) {
1512 u8 dtimper = found->u.mgd.dtim_period;
1515 beaconint_us = ieee80211_tu_to_usec(
1516 found->vif.bss_conf.beacon_int);
1518 timeout = local->dynamic_ps_forced_timeout;
1521 local->hw.conf.dynamic_ps_timeout = timeout;
1523 /* If the TIM IE is invalid, pretend the value is 1 */
1527 local->hw.conf.ps_dtim_period = dtimper;
1528 local->ps_sdata = found;
1530 local->ps_sdata = NULL;
1533 ieee80211_change_ps(local);
1536 void ieee80211_recalc_ps_vif(struct ieee80211_sub_if_data *sdata)
1538 bool ps_allowed = ieee80211_powersave_allowed(sdata);
1540 if (sdata->vif.bss_conf.ps != ps_allowed) {
1541 sdata->vif.bss_conf.ps = ps_allowed;
1542 ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_PS);
1546 void ieee80211_dynamic_ps_disable_work(struct work_struct *work)
1548 struct ieee80211_local *local =
1549 container_of(work, struct ieee80211_local,
1550 dynamic_ps_disable_work);
1552 if (local->hw.conf.flags & IEEE80211_CONF_PS) {
1553 local->hw.conf.flags &= ~IEEE80211_CONF_PS;
1554 ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_PS);
1557 ieee80211_wake_queues_by_reason(&local->hw,
1558 IEEE80211_MAX_QUEUE_MAP,
1559 IEEE80211_QUEUE_STOP_REASON_PS,
1563 void ieee80211_dynamic_ps_enable_work(struct work_struct *work)
1565 struct ieee80211_local *local =
1566 container_of(work, struct ieee80211_local,
1567 dynamic_ps_enable_work);
1568 struct ieee80211_sub_if_data *sdata = local->ps_sdata;
1569 struct ieee80211_if_managed *ifmgd;
1570 unsigned long flags;
1573 /* can only happen when PS was just disabled anyway */
1577 ifmgd = &sdata->u.mgd;
1579 if (local->hw.conf.flags & IEEE80211_CONF_PS)
1582 if (local->hw.conf.dynamic_ps_timeout > 0) {
1583 /* don't enter PS if TX frames are pending */
1584 if (drv_tx_frames_pending(local)) {
1585 mod_timer(&local->dynamic_ps_timer, jiffies +
1587 local->hw.conf.dynamic_ps_timeout));
1592 * transmission can be stopped by others which leads to
1593 * dynamic_ps_timer expiry. Postpone the ps timer if it
1594 * is not the actual idle state.
1596 spin_lock_irqsave(&local->queue_stop_reason_lock, flags);
1597 for (q = 0; q < local->hw.queues; q++) {
1598 if (local->queue_stop_reasons[q]) {
1599 spin_unlock_irqrestore(&local->queue_stop_reason_lock,
1601 mod_timer(&local->dynamic_ps_timer, jiffies +
1603 local->hw.conf.dynamic_ps_timeout));
1607 spin_unlock_irqrestore(&local->queue_stop_reason_lock, flags);
1610 if (ieee80211_hw_check(&local->hw, PS_NULLFUNC_STACK) &&
1611 !(ifmgd->flags & IEEE80211_STA_NULLFUNC_ACKED)) {
1612 if (drv_tx_frames_pending(local)) {
1613 mod_timer(&local->dynamic_ps_timer, jiffies +
1615 local->hw.conf.dynamic_ps_timeout));
1617 ieee80211_send_nullfunc(local, sdata, true);
1618 /* Flush to get the tx status of nullfunc frame */
1619 ieee80211_flush_queues(local, sdata, false);
1623 if (!(ieee80211_hw_check(&local->hw, REPORTS_TX_ACK_STATUS) &&
1624 ieee80211_hw_check(&local->hw, PS_NULLFUNC_STACK)) ||
1625 (ifmgd->flags & IEEE80211_STA_NULLFUNC_ACKED)) {
1626 ifmgd->flags &= ~IEEE80211_STA_NULLFUNC_ACKED;
1627 local->hw.conf.flags |= IEEE80211_CONF_PS;
1628 ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_PS);
1632 void ieee80211_dynamic_ps_timer(unsigned long data)
1634 struct ieee80211_local *local = (void *) data;
1636 ieee80211_queue_work(&local->hw, &local->dynamic_ps_enable_work);
1639 void ieee80211_dfs_cac_timer_work(struct work_struct *work)
1641 struct delayed_work *delayed_work =
1642 container_of(work, struct delayed_work, work);
1643 struct ieee80211_sub_if_data *sdata =
1644 container_of(delayed_work, struct ieee80211_sub_if_data,
1645 dfs_cac_timer_work);
1646 struct cfg80211_chan_def chandef = sdata->vif.bss_conf.chandef;
1648 mutex_lock(&sdata->local->mtx);
1649 if (sdata->wdev.cac_started) {
1650 ieee80211_vif_release_channel(sdata);
1651 cfg80211_cac_event(sdata->dev, &chandef,
1652 NL80211_RADAR_CAC_FINISHED,
1655 mutex_unlock(&sdata->local->mtx);
1659 __ieee80211_sta_handle_tspec_ac_params(struct ieee80211_sub_if_data *sdata)
1661 struct ieee80211_local *local = sdata->local;
1662 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
1666 if (local->hw.queues < IEEE80211_NUM_ACS)
1669 for (ac = 0; ac < IEEE80211_NUM_ACS; ac++) {
1670 struct ieee80211_sta_tx_tspec *tx_tspec = &ifmgd->tx_tspec[ac];
1672 unsigned long now = jiffies;
1674 if (tx_tspec->action == TX_TSPEC_ACTION_NONE &&
1675 tx_tspec->admitted_time &&
1676 time_after(now, tx_tspec->time_slice_start + HZ)) {
1677 tx_tspec->consumed_tx_time = 0;
1678 tx_tspec->time_slice_start = now;
1680 if (tx_tspec->downgraded)
1682 TX_TSPEC_ACTION_STOP_DOWNGRADE;
1685 switch (tx_tspec->action) {
1686 case TX_TSPEC_ACTION_STOP_DOWNGRADE:
1687 /* take the original parameters */
1688 if (drv_conf_tx(local, sdata, ac, &sdata->tx_conf[ac]))
1690 "failed to set TX queue parameters for queue %d\n",
1692 tx_tspec->action = TX_TSPEC_ACTION_NONE;
1693 tx_tspec->downgraded = false;
1696 case TX_TSPEC_ACTION_DOWNGRADE:
1697 if (time_after(now, tx_tspec->time_slice_start + HZ)) {
1698 tx_tspec->action = TX_TSPEC_ACTION_NONE;
1702 /* downgrade next lower non-ACM AC */
1703 for (non_acm_ac = ac + 1;
1704 non_acm_ac < IEEE80211_NUM_ACS;
1706 if (!(sdata->wmm_acm & BIT(7 - 2 * non_acm_ac)))
1708 /* The loop will result in using BK even if it requires
1709 * admission control, such configuration makes no sense
1710 * and we have to transmit somehow - the AC selection
1711 * does the same thing.
1713 if (drv_conf_tx(local, sdata, ac,
1714 &sdata->tx_conf[non_acm_ac]))
1716 "failed to set TX queue parameters for queue %d\n",
1718 tx_tspec->action = TX_TSPEC_ACTION_NONE;
1720 schedule_delayed_work(&ifmgd->tx_tspec_wk,
1721 tx_tspec->time_slice_start + HZ - now + 1);
1723 case TX_TSPEC_ACTION_NONE:
1732 void ieee80211_sta_handle_tspec_ac_params(struct ieee80211_sub_if_data *sdata)
1734 if (__ieee80211_sta_handle_tspec_ac_params(sdata))
1735 ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_QOS);
1738 static void ieee80211_sta_handle_tspec_ac_params_wk(struct work_struct *work)
1740 struct ieee80211_sub_if_data *sdata;
1742 sdata = container_of(work, struct ieee80211_sub_if_data,
1743 u.mgd.tx_tspec_wk.work);
1744 ieee80211_sta_handle_tspec_ac_params(sdata);
1748 static bool ieee80211_sta_wmm_params(struct ieee80211_local *local,
1749 struct ieee80211_sub_if_data *sdata,
1750 const u8 *wmm_param, size_t wmm_param_len)
1752 struct ieee80211_tx_queue_params params[IEEE80211_NUM_ACS];
1753 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
1757 u8 uapsd_queues = 0;
1759 if (!local->ops->conf_tx)
1762 if (local->hw.queues < IEEE80211_NUM_ACS)
1768 if (wmm_param_len < 8 || wmm_param[5] /* version */ != 1)
1771 if (ifmgd->flags & IEEE80211_STA_UAPSD_ENABLED)
1772 uapsd_queues = ifmgd->uapsd_queues;
1774 count = wmm_param[6] & 0x0f;
1775 if (count == ifmgd->wmm_last_param_set)
1777 ifmgd->wmm_last_param_set = count;
1779 pos = wmm_param + 8;
1780 left = wmm_param_len - 8;
1782 memset(¶ms, 0, sizeof(params));
1785 for (; left >= 4; left -= 4, pos += 4) {
1786 int aci = (pos[0] >> 5) & 0x03;
1787 int acm = (pos[0] >> 4) & 0x01;
1792 ac = IEEE80211_AC_BK;
1794 sdata->wmm_acm |= BIT(1) | BIT(2); /* BK/- */
1795 if (uapsd_queues & IEEE80211_WMM_IE_STA_QOSINFO_AC_BK)
1799 ac = IEEE80211_AC_VI;
1801 sdata->wmm_acm |= BIT(4) | BIT(5); /* CL/VI */
1802 if (uapsd_queues & IEEE80211_WMM_IE_STA_QOSINFO_AC_VI)
1806 ac = IEEE80211_AC_VO;
1808 sdata->wmm_acm |= BIT(6) | BIT(7); /* VO/NC */
1809 if (uapsd_queues & IEEE80211_WMM_IE_STA_QOSINFO_AC_VO)
1814 ac = IEEE80211_AC_BE;
1816 sdata->wmm_acm |= BIT(0) | BIT(3); /* BE/EE */
1817 if (uapsd_queues & IEEE80211_WMM_IE_STA_QOSINFO_AC_BE)
1822 params[ac].aifs = pos[0] & 0x0f;
1824 if (params[ac].aifs < 2) {
1826 "AP has invalid WMM params (AIFSN=%d for ACI %d), will use 2\n",
1827 params[ac].aifs, aci);
1828 params[ac].aifs = 2;
1830 params[ac].cw_max = ecw2cw((pos[1] & 0xf0) >> 4);
1831 params[ac].cw_min = ecw2cw(pos[1] & 0x0f);
1832 params[ac].txop = get_unaligned_le16(pos + 2);
1833 params[ac].acm = acm;
1834 params[ac].uapsd = uapsd;
1836 if (params[ac].cw_min > params[ac].cw_max) {
1838 "AP has invalid WMM params (CWmin/max=%d/%d for ACI %d), using defaults\n",
1839 params[ac].cw_min, params[ac].cw_max, aci);
1844 for (ac = 0; ac < IEEE80211_NUM_ACS; ac++) {
1846 "WMM AC=%d acm=%d aifs=%d cWmin=%d cWmax=%d txop=%d uapsd=%d, downgraded=%d\n",
1848 params[ac].aifs, params[ac].cw_min, params[ac].cw_max,
1849 params[ac].txop, params[ac].uapsd,
1850 ifmgd->tx_tspec[ac].downgraded);
1851 sdata->tx_conf[ac] = params[ac];
1852 if (!ifmgd->tx_tspec[ac].downgraded &&
1853 drv_conf_tx(local, sdata, ac, ¶ms[ac]))
1855 "failed to set TX queue parameters for AC %d\n",
1859 /* enable WMM or activate new settings */
1860 sdata->vif.bss_conf.qos = true;
1864 static void __ieee80211_stop_poll(struct ieee80211_sub_if_data *sdata)
1866 lockdep_assert_held(&sdata->local->mtx);
1868 sdata->u.mgd.flags &= ~IEEE80211_STA_CONNECTION_POLL;
1869 ieee80211_run_deferred_scan(sdata->local);
1872 static void ieee80211_stop_poll(struct ieee80211_sub_if_data *sdata)
1874 mutex_lock(&sdata->local->mtx);
1875 __ieee80211_stop_poll(sdata);
1876 mutex_unlock(&sdata->local->mtx);
1879 static u32 ieee80211_handle_bss_capability(struct ieee80211_sub_if_data *sdata,
1880 u16 capab, bool erp_valid, u8 erp)
1882 struct ieee80211_bss_conf *bss_conf = &sdata->vif.bss_conf;
1884 bool use_protection;
1885 bool use_short_preamble;
1886 bool use_short_slot;
1889 use_protection = (erp & WLAN_ERP_USE_PROTECTION) != 0;
1890 use_short_preamble = (erp & WLAN_ERP_BARKER_PREAMBLE) == 0;
1892 use_protection = false;
1893 use_short_preamble = !!(capab & WLAN_CAPABILITY_SHORT_PREAMBLE);
1896 use_short_slot = !!(capab & WLAN_CAPABILITY_SHORT_SLOT_TIME);
1897 if (ieee80211_get_sdata_band(sdata) == IEEE80211_BAND_5GHZ)
1898 use_short_slot = true;
1900 if (use_protection != bss_conf->use_cts_prot) {
1901 bss_conf->use_cts_prot = use_protection;
1902 changed |= BSS_CHANGED_ERP_CTS_PROT;
1905 if (use_short_preamble != bss_conf->use_short_preamble) {
1906 bss_conf->use_short_preamble = use_short_preamble;
1907 changed |= BSS_CHANGED_ERP_PREAMBLE;
1910 if (use_short_slot != bss_conf->use_short_slot) {
1911 bss_conf->use_short_slot = use_short_slot;
1912 changed |= BSS_CHANGED_ERP_SLOT;
1918 static void ieee80211_set_associated(struct ieee80211_sub_if_data *sdata,
1919 struct cfg80211_bss *cbss,
1920 u32 bss_info_changed)
1922 struct ieee80211_bss *bss = (void *)cbss->priv;
1923 struct ieee80211_local *local = sdata->local;
1924 struct ieee80211_bss_conf *bss_conf = &sdata->vif.bss_conf;
1926 bss_info_changed |= BSS_CHANGED_ASSOC;
1927 bss_info_changed |= ieee80211_handle_bss_capability(sdata,
1928 bss_conf->assoc_capability, bss->has_erp_value, bss->erp_value);
1930 sdata->u.mgd.beacon_timeout = usecs_to_jiffies(ieee80211_tu_to_usec(
1931 beacon_loss_count * bss_conf->beacon_int));
1933 sdata->u.mgd.associated = cbss;
1934 memcpy(sdata->u.mgd.bssid, cbss->bssid, ETH_ALEN);
1936 sdata->u.mgd.flags |= IEEE80211_STA_RESET_SIGNAL_AVE;
1938 if (sdata->vif.p2p ||
1939 sdata->vif.driver_flags & IEEE80211_VIF_GET_NOA_UPDATE) {
1940 const struct cfg80211_bss_ies *ies;
1943 ies = rcu_dereference(cbss->ies);
1947 ret = cfg80211_get_p2p_attr(
1948 ies->data, ies->len,
1949 IEEE80211_P2P_ATTR_ABSENCE_NOTICE,
1950 (u8 *) &bss_conf->p2p_noa_attr,
1951 sizeof(bss_conf->p2p_noa_attr));
1953 sdata->u.mgd.p2p_noa_index =
1954 bss_conf->p2p_noa_attr.index;
1955 bss_info_changed |= BSS_CHANGED_P2P_PS;
1961 /* just to be sure */
1962 ieee80211_stop_poll(sdata);
1964 ieee80211_led_assoc(local, 1);
1966 if (sdata->u.mgd.have_beacon) {
1968 * If the AP is buggy we may get here with no DTIM period
1969 * known, so assume it's 1 which is the only safe assumption
1970 * in that case, although if the TIM IE is broken powersave
1971 * probably just won't work at all.
1973 bss_conf->dtim_period = sdata->u.mgd.dtim_period ?: 1;
1974 bss_conf->beacon_rate = bss->beacon_rate;
1975 bss_info_changed |= BSS_CHANGED_BEACON_INFO;
1977 bss_conf->beacon_rate = NULL;
1978 bss_conf->dtim_period = 0;
1981 bss_conf->assoc = 1;
1983 /* Tell the driver to monitor connection quality (if supported) */
1984 if (sdata->vif.driver_flags & IEEE80211_VIF_SUPPORTS_CQM_RSSI &&
1985 bss_conf->cqm_rssi_thold)
1986 bss_info_changed |= BSS_CHANGED_CQM;
1988 /* Enable ARP filtering */
1989 if (bss_conf->arp_addr_cnt)
1990 bss_info_changed |= BSS_CHANGED_ARP_FILTER;
1992 ieee80211_bss_info_change_notify(sdata, bss_info_changed);
1994 mutex_lock(&local->iflist_mtx);
1995 ieee80211_recalc_ps(local);
1996 mutex_unlock(&local->iflist_mtx);
1998 ieee80211_recalc_smps(sdata);
1999 ieee80211_recalc_ps_vif(sdata);
2001 netif_carrier_on(sdata->dev);
2004 static void ieee80211_set_disassoc(struct ieee80211_sub_if_data *sdata,
2005 u16 stype, u16 reason, bool tx,
2008 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
2009 struct ieee80211_local *local = sdata->local;
2012 sdata_assert_lock(sdata);
2014 if (WARN_ON_ONCE(tx && !frame_buf))
2017 if (WARN_ON(!ifmgd->associated))
2020 ieee80211_stop_poll(sdata);
2022 ifmgd->associated = NULL;
2023 netif_carrier_off(sdata->dev);
2026 * if we want to get out of ps before disassoc (why?) we have
2027 * to do it before sending disassoc, as otherwise the null-packet
2030 if (local->hw.conf.flags & IEEE80211_CONF_PS) {
2031 local->hw.conf.flags &= ~IEEE80211_CONF_PS;
2032 ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_PS);
2034 local->ps_sdata = NULL;
2036 /* disable per-vif ps */
2037 ieee80211_recalc_ps_vif(sdata);
2039 /* make sure ongoing transmission finishes */
2043 * drop any frame before deauth/disassoc, this can be data or
2044 * management frame. Since we are disconnecting, we should not
2045 * insist sending these frames which can take time and delay
2046 * the disconnection and possible the roaming.
2049 ieee80211_flush_queues(local, sdata, true);
2051 /* deauthenticate/disassociate now */
2052 if (tx || frame_buf)
2053 ieee80211_send_deauth_disassoc(sdata, ifmgd->bssid, stype,
2054 reason, tx, frame_buf);
2056 /* flush out frame - make sure the deauth was actually sent */
2058 ieee80211_flush_queues(local, sdata, false);
2060 /* clear bssid only after building the needed mgmt frames */
2061 eth_zero_addr(ifmgd->bssid);
2063 /* remove AP and TDLS peers */
2064 sta_info_flush(sdata);
2066 /* finally reset all BSS / config parameters */
2067 changed |= ieee80211_reset_erp_info(sdata);
2069 ieee80211_led_assoc(local, 0);
2070 changed |= BSS_CHANGED_ASSOC;
2071 sdata->vif.bss_conf.assoc = false;
2073 ifmgd->p2p_noa_index = -1;
2074 memset(&sdata->vif.bss_conf.p2p_noa_attr, 0,
2075 sizeof(sdata->vif.bss_conf.p2p_noa_attr));
2077 /* on the next assoc, re-program HT/VHT parameters */
2078 memset(&ifmgd->ht_capa, 0, sizeof(ifmgd->ht_capa));
2079 memset(&ifmgd->ht_capa_mask, 0, sizeof(ifmgd->ht_capa_mask));
2080 memset(&ifmgd->vht_capa, 0, sizeof(ifmgd->vht_capa));
2081 memset(&ifmgd->vht_capa_mask, 0, sizeof(ifmgd->vht_capa_mask));
2082 sdata->flags &= ~IEEE80211_SDATA_MU_MIMO_OWNER;
2084 sdata->ap_power_level = IEEE80211_UNSET_POWER_LEVEL;
2086 del_timer_sync(&local->dynamic_ps_timer);
2087 cancel_work_sync(&local->dynamic_ps_enable_work);
2089 /* Disable ARP filtering */
2090 if (sdata->vif.bss_conf.arp_addr_cnt)
2091 changed |= BSS_CHANGED_ARP_FILTER;
2093 sdata->vif.bss_conf.qos = false;
2094 changed |= BSS_CHANGED_QOS;
2096 /* The BSSID (not really interesting) and HT changed */
2097 changed |= BSS_CHANGED_BSSID | BSS_CHANGED_HT;
2098 ieee80211_bss_info_change_notify(sdata, changed);
2100 /* disassociated - set to defaults now */
2101 ieee80211_set_wmm_default(sdata, false, false);
2103 del_timer_sync(&sdata->u.mgd.conn_mon_timer);
2104 del_timer_sync(&sdata->u.mgd.bcn_mon_timer);
2105 del_timer_sync(&sdata->u.mgd.timer);
2106 del_timer_sync(&sdata->u.mgd.chswitch_timer);
2108 sdata->vif.bss_conf.dtim_period = 0;
2109 sdata->vif.bss_conf.beacon_rate = NULL;
2111 ifmgd->have_beacon = false;
2114 mutex_lock(&local->mtx);
2115 ieee80211_vif_release_channel(sdata);
2117 sdata->vif.csa_active = false;
2118 ifmgd->csa_waiting_bcn = false;
2119 ifmgd->csa_ignored_same_chan = false;
2120 if (sdata->csa_block_tx) {
2121 ieee80211_wake_vif_queues(local, sdata,
2122 IEEE80211_QUEUE_STOP_REASON_CSA);
2123 sdata->csa_block_tx = false;
2125 mutex_unlock(&local->mtx);
2127 /* existing TX TSPEC sessions no longer exist */
2128 memset(ifmgd->tx_tspec, 0, sizeof(ifmgd->tx_tspec));
2129 cancel_delayed_work_sync(&ifmgd->tx_tspec_wk);
2131 sdata->encrypt_headroom = IEEE80211_ENCRYPT_HEADROOM;
2134 void ieee80211_sta_rx_notify(struct ieee80211_sub_if_data *sdata,
2135 struct ieee80211_hdr *hdr)
2138 * We can postpone the mgd.timer whenever receiving unicast frames
2139 * from AP because we know that the connection is working both ways
2140 * at that time. But multicast frames (and hence also beacons) must
2141 * be ignored here, because we need to trigger the timer during
2142 * data idle periods for sending the periodic probe request to the
2143 * AP we're connected to.
2145 if (is_multicast_ether_addr(hdr->addr1))
2148 ieee80211_sta_reset_conn_monitor(sdata);
2151 static void ieee80211_reset_ap_probe(struct ieee80211_sub_if_data *sdata)
2153 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
2154 struct ieee80211_local *local = sdata->local;
2156 mutex_lock(&local->mtx);
2157 if (!(ifmgd->flags & IEEE80211_STA_CONNECTION_POLL))
2160 __ieee80211_stop_poll(sdata);
2162 mutex_lock(&local->iflist_mtx);
2163 ieee80211_recalc_ps(local);
2164 mutex_unlock(&local->iflist_mtx);
2166 if (ieee80211_hw_check(&sdata->local->hw, CONNECTION_MONITOR))
2170 * We've received a probe response, but are not sure whether
2171 * we have or will be receiving any beacons or data, so let's
2172 * schedule the timers again, just in case.
2174 ieee80211_sta_reset_beacon_monitor(sdata);
2176 mod_timer(&ifmgd->conn_mon_timer,
2177 round_jiffies_up(jiffies +
2178 IEEE80211_CONNECTION_IDLE_TIME));
2180 mutex_unlock(&local->mtx);
2183 static void ieee80211_sta_tx_wmm_ac_notify(struct ieee80211_sub_if_data *sdata,
2184 struct ieee80211_hdr *hdr,
2187 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
2188 u16 tid = *ieee80211_get_qos_ctl(hdr) & IEEE80211_QOS_CTL_TID_MASK;
2189 int ac = ieee80211_ac_from_tid(tid);
2190 struct ieee80211_sta_tx_tspec *tx_tspec = &ifmgd->tx_tspec[ac];
2191 unsigned long now = jiffies;
2193 if (likely(!tx_tspec->admitted_time))
2196 if (time_after(now, tx_tspec->time_slice_start + HZ)) {
2197 tx_tspec->consumed_tx_time = 0;
2198 tx_tspec->time_slice_start = now;
2200 if (tx_tspec->downgraded) {
2201 tx_tspec->action = TX_TSPEC_ACTION_STOP_DOWNGRADE;
2202 schedule_delayed_work(&ifmgd->tx_tspec_wk, 0);
2206 if (tx_tspec->downgraded)
2209 tx_tspec->consumed_tx_time += tx_time;
2211 if (tx_tspec->consumed_tx_time >= tx_tspec->admitted_time) {
2212 tx_tspec->downgraded = true;
2213 tx_tspec->action = TX_TSPEC_ACTION_DOWNGRADE;
2214 schedule_delayed_work(&ifmgd->tx_tspec_wk, 0);
2218 void ieee80211_sta_tx_notify(struct ieee80211_sub_if_data *sdata,
2219 struct ieee80211_hdr *hdr, bool ack, u16 tx_time)
2221 ieee80211_sta_tx_wmm_ac_notify(sdata, hdr, tx_time);
2223 if (!ieee80211_is_data(hdr->frame_control))
2226 if (ieee80211_is_nullfunc(hdr->frame_control) &&
2227 sdata->u.mgd.probe_send_count > 0) {
2229 ieee80211_sta_reset_conn_monitor(sdata);
2231 sdata->u.mgd.nullfunc_failed = true;
2232 ieee80211_queue_work(&sdata->local->hw, &sdata->work);
2237 ieee80211_sta_reset_conn_monitor(sdata);
2240 static void ieee80211_mgd_probe_ap_send(struct ieee80211_sub_if_data *sdata)
2242 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
2244 u8 *dst = ifmgd->associated->bssid;
2245 u8 unicast_limit = max(1, max_probe_tries - 3);
2248 * Try sending broadcast probe requests for the last three
2249 * probe requests after the first ones failed since some
2250 * buggy APs only support broadcast probe requests.
2252 if (ifmgd->probe_send_count >= unicast_limit)
2256 * When the hardware reports an accurate Tx ACK status, it's
2257 * better to send a nullfunc frame instead of a probe request,
2258 * as it will kick us off the AP quickly if we aren't associated
2259 * anymore. The timeout will be reset if the frame is ACKed by
2262 ifmgd->probe_send_count++;
2264 if (ieee80211_hw_check(&sdata->local->hw, REPORTS_TX_ACK_STATUS)) {
2265 ifmgd->nullfunc_failed = false;
2266 ieee80211_send_nullfunc(sdata->local, sdata, false);
2271 ssid = ieee80211_bss_get_ie(ifmgd->associated, WLAN_EID_SSID);
2272 if (WARN_ON_ONCE(ssid == NULL))
2277 ieee80211_send_probe_req(sdata, sdata->vif.addr, dst,
2278 ssid + 2, ssid_len, NULL,
2279 0, (u32) -1, true, 0,
2280 ifmgd->associated->channel, false);
2284 ifmgd->probe_timeout = jiffies + msecs_to_jiffies(probe_wait_ms);
2285 run_again(sdata, ifmgd->probe_timeout);
2288 static void ieee80211_mgd_probe_ap(struct ieee80211_sub_if_data *sdata,
2291 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
2292 bool already = false;
2294 if (!ieee80211_sdata_running(sdata))
2299 if (!ifmgd->associated)
2302 mutex_lock(&sdata->local->mtx);
2304 if (sdata->local->tmp_channel || sdata->local->scanning) {
2305 mutex_unlock(&sdata->local->mtx);
2310 mlme_dbg_ratelimited(sdata,
2311 "detected beacon loss from AP (missed %d beacons) - probing\n",
2314 ieee80211_cqm_beacon_loss_notify(&sdata->vif, GFP_KERNEL);
2318 * The driver/our work has already reported this event or the
2319 * connection monitoring has kicked in and we have already sent
2320 * a probe request. Or maybe the AP died and the driver keeps
2321 * reporting until we disassociate...
2323 * In either case we have to ignore the current call to this
2324 * function (except for setting the correct probe reason bit)
2325 * because otherwise we would reset the timer every time and
2326 * never check whether we received a probe response!
2328 if (ifmgd->flags & IEEE80211_STA_CONNECTION_POLL)
2331 ifmgd->flags |= IEEE80211_STA_CONNECTION_POLL;
2333 mutex_unlock(&sdata->local->mtx);
2338 mutex_lock(&sdata->local->iflist_mtx);
2339 ieee80211_recalc_ps(sdata->local);
2340 mutex_unlock(&sdata->local->iflist_mtx);
2342 ifmgd->probe_send_count = 0;
2343 ieee80211_mgd_probe_ap_send(sdata);
2345 sdata_unlock(sdata);
2348 struct sk_buff *ieee80211_ap_probereq_get(struct ieee80211_hw *hw,
2349 struct ieee80211_vif *vif)
2351 struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif);
2352 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
2353 struct cfg80211_bss *cbss;
2354 struct sk_buff *skb;
2358 if (WARN_ON(sdata->vif.type != NL80211_IFTYPE_STATION))
2361 sdata_assert_lock(sdata);
2363 if (ifmgd->associated)
2364 cbss = ifmgd->associated;
2365 else if (ifmgd->auth_data)
2366 cbss = ifmgd->auth_data->bss;
2367 else if (ifmgd->assoc_data)
2368 cbss = ifmgd->assoc_data->bss;
2373 ssid = ieee80211_bss_get_ie(cbss, WLAN_EID_SSID);
2374 if (WARN_ON_ONCE(ssid == NULL))
2379 skb = ieee80211_build_probe_req(sdata, sdata->vif.addr, cbss->bssid,
2380 (u32) -1, cbss->channel,
2387 EXPORT_SYMBOL(ieee80211_ap_probereq_get);
2389 static void ieee80211_report_disconnect(struct ieee80211_sub_if_data *sdata,
2390 const u8 *buf, size_t len, bool tx,
2393 struct ieee80211_event event = {
2395 .u.mlme.data = tx ? DEAUTH_TX_EVENT : DEAUTH_RX_EVENT,
2396 .u.mlme.reason = reason,
2400 cfg80211_tx_mlme_mgmt(sdata->dev, buf, len);
2402 cfg80211_rx_mlme_mgmt(sdata->dev, buf, len);
2404 drv_event_callback(sdata->local, sdata, &event);
2407 static void __ieee80211_disconnect(struct ieee80211_sub_if_data *sdata)
2409 struct ieee80211_local *local = sdata->local;
2410 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
2411 u8 frame_buf[IEEE80211_DEAUTH_FRAME_LEN];
2414 if (!ifmgd->associated) {
2415 sdata_unlock(sdata);
2419 ieee80211_set_disassoc(sdata, IEEE80211_STYPE_DEAUTH,
2420 WLAN_REASON_DISASSOC_DUE_TO_INACTIVITY,
2422 mutex_lock(&local->mtx);
2423 sdata->vif.csa_active = false;
2424 ifmgd->csa_waiting_bcn = false;
2425 if (sdata->csa_block_tx) {
2426 ieee80211_wake_vif_queues(local, sdata,
2427 IEEE80211_QUEUE_STOP_REASON_CSA);
2428 sdata->csa_block_tx = false;
2430 mutex_unlock(&local->mtx);
2432 ieee80211_report_disconnect(sdata, frame_buf, sizeof(frame_buf), true,
2433 WLAN_REASON_DISASSOC_DUE_TO_INACTIVITY);
2435 sdata_unlock(sdata);
2438 static void ieee80211_beacon_connection_loss_work(struct work_struct *work)
2440 struct ieee80211_sub_if_data *sdata =
2441 container_of(work, struct ieee80211_sub_if_data,
2442 u.mgd.beacon_connection_loss_work);
2443 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
2445 if (ifmgd->associated)
2446 ifmgd->beacon_loss_count++;
2448 if (ifmgd->connection_loss) {
2449 sdata_info(sdata, "Connection to AP %pM lost\n",
2451 __ieee80211_disconnect(sdata);
2453 ieee80211_mgd_probe_ap(sdata, true);
2457 static void ieee80211_csa_connection_drop_work(struct work_struct *work)
2459 struct ieee80211_sub_if_data *sdata =
2460 container_of(work, struct ieee80211_sub_if_data,
2461 u.mgd.csa_connection_drop_work);
2463 __ieee80211_disconnect(sdata);
2466 void ieee80211_beacon_loss(struct ieee80211_vif *vif)
2468 struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif);
2469 struct ieee80211_hw *hw = &sdata->local->hw;
2471 trace_api_beacon_loss(sdata);
2473 sdata->u.mgd.connection_loss = false;
2474 ieee80211_queue_work(hw, &sdata->u.mgd.beacon_connection_loss_work);
2476 EXPORT_SYMBOL(ieee80211_beacon_loss);
2478 void ieee80211_connection_loss(struct ieee80211_vif *vif)
2480 struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif);
2481 struct ieee80211_hw *hw = &sdata->local->hw;
2483 trace_api_connection_loss(sdata);
2485 sdata->u.mgd.connection_loss = true;
2486 ieee80211_queue_work(hw, &sdata->u.mgd.beacon_connection_loss_work);
2488 EXPORT_SYMBOL(ieee80211_connection_loss);
2491 static void ieee80211_destroy_auth_data(struct ieee80211_sub_if_data *sdata,
2494 struct ieee80211_mgd_auth_data *auth_data = sdata->u.mgd.auth_data;
2496 sdata_assert_lock(sdata);
2500 * we are not authenticated yet, the only timer that could be
2501 * running is the timeout for the authentication response which
2502 * which is not relevant anymore.
2504 del_timer_sync(&sdata->u.mgd.timer);
2505 sta_info_destroy_addr(sdata, auth_data->bss->bssid);
2507 eth_zero_addr(sdata->u.mgd.bssid);
2508 ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_BSSID);
2509 sdata->u.mgd.flags = 0;
2510 mutex_lock(&sdata->local->mtx);
2511 ieee80211_vif_release_channel(sdata);
2512 mutex_unlock(&sdata->local->mtx);
2515 cfg80211_put_bss(sdata->local->hw.wiphy, auth_data->bss);
2517 sdata->u.mgd.auth_data = NULL;
2520 static void ieee80211_destroy_assoc_data(struct ieee80211_sub_if_data *sdata,
2523 struct ieee80211_mgd_assoc_data *assoc_data = sdata->u.mgd.assoc_data;
2525 sdata_assert_lock(sdata);
2529 * we are not associated yet, the only timer that could be
2530 * running is the timeout for the association response which
2531 * which is not relevant anymore.
2533 del_timer_sync(&sdata->u.mgd.timer);
2534 sta_info_destroy_addr(sdata, assoc_data->bss->bssid);
2536 eth_zero_addr(sdata->u.mgd.bssid);
2537 ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_BSSID);
2538 sdata->u.mgd.flags = 0;
2539 sdata->flags &= ~IEEE80211_SDATA_MU_MIMO_OWNER;
2540 mutex_lock(&sdata->local->mtx);
2541 ieee80211_vif_release_channel(sdata);
2542 mutex_unlock(&sdata->local->mtx);
2546 sdata->u.mgd.assoc_data = NULL;
2549 static void ieee80211_auth_challenge(struct ieee80211_sub_if_data *sdata,
2550 struct ieee80211_mgmt *mgmt, size_t len)
2552 struct ieee80211_local *local = sdata->local;
2553 struct ieee80211_mgd_auth_data *auth_data = sdata->u.mgd.auth_data;
2555 struct ieee802_11_elems elems;
2558 pos = mgmt->u.auth.variable;
2559 ieee802_11_parse_elems(pos, len - (pos - (u8 *) mgmt), false, &elems);
2560 if (!elems.challenge)
2562 auth_data->expected_transaction = 4;
2563 drv_mgd_prepare_tx(sdata->local, sdata);
2564 if (ieee80211_hw_check(&local->hw, REPORTS_TX_ACK_STATUS))
2565 tx_flags = IEEE80211_TX_CTL_REQ_TX_STATUS |
2566 IEEE80211_TX_INTFL_MLME_CONN_TX;
2567 ieee80211_send_auth(sdata, 3, auth_data->algorithm, 0,
2568 elems.challenge - 2, elems.challenge_len + 2,
2569 auth_data->bss->bssid, auth_data->bss->bssid,
2570 auth_data->key, auth_data->key_len,
2571 auth_data->key_idx, tx_flags);
2574 static void ieee80211_rx_mgmt_auth(struct ieee80211_sub_if_data *sdata,
2575 struct ieee80211_mgmt *mgmt, size_t len)
2577 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
2579 u16 auth_alg, auth_transaction, status_code;
2580 struct sta_info *sta;
2581 struct ieee80211_event event = {
2583 .u.mlme.data = AUTH_EVENT,
2586 sdata_assert_lock(sdata);
2591 if (!ifmgd->auth_data || ifmgd->auth_data->done)
2594 memcpy(bssid, ifmgd->auth_data->bss->bssid, ETH_ALEN);
2596 if (!ether_addr_equal(bssid, mgmt->bssid))
2599 auth_alg = le16_to_cpu(mgmt->u.auth.auth_alg);
2600 auth_transaction = le16_to_cpu(mgmt->u.auth.auth_transaction);
2601 status_code = le16_to_cpu(mgmt->u.auth.status_code);
2603 if (auth_alg != ifmgd->auth_data->algorithm ||
2604 auth_transaction != ifmgd->auth_data->expected_transaction) {
2605 sdata_info(sdata, "%pM unexpected authentication state: alg %d (expected %d) transact %d (expected %d)\n",
2606 mgmt->sa, auth_alg, ifmgd->auth_data->algorithm,
2608 ifmgd->auth_data->expected_transaction);
2612 if (status_code != WLAN_STATUS_SUCCESS) {
2613 sdata_info(sdata, "%pM denied authentication (status %d)\n",
2614 mgmt->sa, status_code);
2615 ieee80211_destroy_auth_data(sdata, false);
2616 cfg80211_rx_mlme_mgmt(sdata->dev, (u8 *)mgmt, len);
2617 event.u.mlme.status = MLME_DENIED;
2618 event.u.mlme.reason = status_code;
2619 drv_event_callback(sdata->local, sdata, &event);
2623 switch (ifmgd->auth_data->algorithm) {
2624 case WLAN_AUTH_OPEN:
2625 case WLAN_AUTH_LEAP:
2629 case WLAN_AUTH_SHARED_KEY:
2630 if (ifmgd->auth_data->expected_transaction != 4) {
2631 ieee80211_auth_challenge(sdata, mgmt, len);
2632 /* need another frame */
2637 WARN_ONCE(1, "invalid auth alg %d",
2638 ifmgd->auth_data->algorithm);
2642 event.u.mlme.status = MLME_SUCCESS;
2643 drv_event_callback(sdata->local, sdata, &event);
2644 sdata_info(sdata, "authenticated\n");
2645 ifmgd->auth_data->done = true;
2646 ifmgd->auth_data->timeout = jiffies + IEEE80211_AUTH_WAIT_ASSOC;
2647 ifmgd->auth_data->timeout_started = true;
2648 run_again(sdata, ifmgd->auth_data->timeout);
2650 if (ifmgd->auth_data->algorithm == WLAN_AUTH_SAE &&
2651 ifmgd->auth_data->expected_transaction != 2) {
2653 * Report auth frame to user space for processing since another
2654 * round of Authentication frames is still needed.
2656 cfg80211_rx_mlme_mgmt(sdata->dev, (u8 *)mgmt, len);
2660 /* move station state to auth */
2661 mutex_lock(&sdata->local->sta_mtx);
2662 sta = sta_info_get(sdata, bssid);
2664 WARN_ONCE(1, "%s: STA %pM not found", sdata->name, bssid);
2667 if (sta_info_move_state(sta, IEEE80211_STA_AUTH)) {
2668 sdata_info(sdata, "failed moving %pM to auth\n", bssid);
2671 mutex_unlock(&sdata->local->sta_mtx);
2673 cfg80211_rx_mlme_mgmt(sdata->dev, (u8 *)mgmt, len);
2676 mutex_unlock(&sdata->local->sta_mtx);
2677 /* ignore frame -- wait for timeout */
2680 #define case_WLAN(type) \
2681 case WLAN_REASON_##type: return #type
2683 static const char *ieee80211_get_reason_code_string(u16 reason_code)
2685 switch (reason_code) {
2686 case_WLAN(UNSPECIFIED);
2687 case_WLAN(PREV_AUTH_NOT_VALID);
2688 case_WLAN(DEAUTH_LEAVING);
2689 case_WLAN(DISASSOC_DUE_TO_INACTIVITY);
2690 case_WLAN(DISASSOC_AP_BUSY);
2691 case_WLAN(CLASS2_FRAME_FROM_NONAUTH_STA);
2692 case_WLAN(CLASS3_FRAME_FROM_NONASSOC_STA);
2693 case_WLAN(DISASSOC_STA_HAS_LEFT);
2694 case_WLAN(STA_REQ_ASSOC_WITHOUT_AUTH);
2695 case_WLAN(DISASSOC_BAD_POWER);
2696 case_WLAN(DISASSOC_BAD_SUPP_CHAN);
2697 case_WLAN(INVALID_IE);
2698 case_WLAN(MIC_FAILURE);
2699 case_WLAN(4WAY_HANDSHAKE_TIMEOUT);
2700 case_WLAN(GROUP_KEY_HANDSHAKE_TIMEOUT);
2701 case_WLAN(IE_DIFFERENT);
2702 case_WLAN(INVALID_GROUP_CIPHER);
2703 case_WLAN(INVALID_PAIRWISE_CIPHER);
2704 case_WLAN(INVALID_AKMP);
2705 case_WLAN(UNSUPP_RSN_VERSION);
2706 case_WLAN(INVALID_RSN_IE_CAP);
2707 case_WLAN(IEEE8021X_FAILED);
2708 case_WLAN(CIPHER_SUITE_REJECTED);
2709 case_WLAN(DISASSOC_UNSPECIFIED_QOS);
2710 case_WLAN(DISASSOC_QAP_NO_BANDWIDTH);
2711 case_WLAN(DISASSOC_LOW_ACK);
2712 case_WLAN(DISASSOC_QAP_EXCEED_TXOP);
2713 case_WLAN(QSTA_LEAVE_QBSS);
2714 case_WLAN(QSTA_NOT_USE);
2715 case_WLAN(QSTA_REQUIRE_SETUP);
2716 case_WLAN(QSTA_TIMEOUT);
2717 case_WLAN(QSTA_CIPHER_NOT_SUPP);
2718 case_WLAN(MESH_PEER_CANCELED);
2719 case_WLAN(MESH_MAX_PEERS);
2720 case_WLAN(MESH_CONFIG);
2721 case_WLAN(MESH_CLOSE);
2722 case_WLAN(MESH_MAX_RETRIES);
2723 case_WLAN(MESH_CONFIRM_TIMEOUT);
2724 case_WLAN(MESH_INVALID_GTK);
2725 case_WLAN(MESH_INCONSISTENT_PARAM);
2726 case_WLAN(MESH_INVALID_SECURITY);
2727 case_WLAN(MESH_PATH_ERROR);
2728 case_WLAN(MESH_PATH_NOFORWARD);
2729 case_WLAN(MESH_PATH_DEST_UNREACHABLE);
2730 case_WLAN(MAC_EXISTS_IN_MBSS);
2731 case_WLAN(MESH_CHAN_REGULATORY);
2732 case_WLAN(MESH_CHAN);
2733 default: return "<unknown>";
2737 static void ieee80211_rx_mgmt_deauth(struct ieee80211_sub_if_data *sdata,
2738 struct ieee80211_mgmt *mgmt, size_t len)
2740 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
2741 u16 reason_code = le16_to_cpu(mgmt->u.deauth.reason_code);
2743 sdata_assert_lock(sdata);
2748 if (ifmgd->associated &&
2749 ether_addr_equal(mgmt->bssid, ifmgd->associated->bssid)) {
2750 const u8 *bssid = ifmgd->associated->bssid;
2752 sdata_info(sdata, "deauthenticated from %pM (Reason: %u=%s)\n",
2754 ieee80211_get_reason_code_string(reason_code));
2756 ieee80211_set_disassoc(sdata, 0, 0, false, NULL);
2758 ieee80211_report_disconnect(sdata, (u8 *)mgmt, len, false,
2763 if (ifmgd->assoc_data &&
2764 ether_addr_equal(mgmt->bssid, ifmgd->assoc_data->bss->bssid)) {
2765 const u8 *bssid = ifmgd->assoc_data->bss->bssid;
2768 "deauthenticated from %pM while associating (Reason: %u=%s)\n",
2770 ieee80211_get_reason_code_string(reason_code));
2772 ieee80211_destroy_assoc_data(sdata, false);
2774 cfg80211_rx_mlme_mgmt(sdata->dev, (u8 *)mgmt, len);
2780 static void ieee80211_rx_mgmt_disassoc(struct ieee80211_sub_if_data *sdata,
2781 struct ieee80211_mgmt *mgmt, size_t len)
2783 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
2786 sdata_assert_lock(sdata);
2791 if (!ifmgd->associated ||
2792 !ether_addr_equal(mgmt->bssid, ifmgd->associated->bssid))
2795 reason_code = le16_to_cpu(mgmt->u.disassoc.reason_code);
2797 sdata_info(sdata, "disassociated from %pM (Reason: %u)\n",
2798 mgmt->sa, reason_code);
2800 ieee80211_set_disassoc(sdata, 0, 0, false, NULL);
2802 ieee80211_report_disconnect(sdata, (u8 *)mgmt, len, false, reason_code);
2805 static void ieee80211_get_rates(struct ieee80211_supported_band *sband,
2806 u8 *supp_rates, unsigned int supp_rates_len,
2807 u32 *rates, u32 *basic_rates,
2808 bool *have_higher_than_11mbit,
2809 int *min_rate, int *min_rate_index,
2810 int shift, u32 rate_flags)
2814 for (i = 0; i < supp_rates_len; i++) {
2815 int rate = supp_rates[i] & 0x7f;
2816 bool is_basic = !!(supp_rates[i] & 0x80);
2818 if ((rate * 5 * (1 << shift)) > 110)
2819 *have_higher_than_11mbit = true;
2822 * BSS_MEMBERSHIP_SELECTOR_HT_PHY is defined in 802.11n-2009
2823 * 7.3.2.2 as a magic value instead of a rate. Hence, skip it.
2825 * Note: Even through the membership selector and the basic
2826 * rate flag share the same bit, they are not exactly
2829 if (!!(supp_rates[i] & 0x80) &&
2830 (supp_rates[i] & 0x7f) == BSS_MEMBERSHIP_SELECTOR_HT_PHY)
2833 for (j = 0; j < sband->n_bitrates; j++) {
2834 struct ieee80211_rate *br;
2837 br = &sband->bitrates[j];
2838 if ((rate_flags & br->flags) != rate_flags)
2841 brate = DIV_ROUND_UP(br->bitrate, (1 << shift) * 5);
2842 if (brate == rate) {
2845 *basic_rates |= BIT(j);
2846 if ((rate * 5) < *min_rate) {
2847 *min_rate = rate * 5;
2848 *min_rate_index = j;
2856 static bool ieee80211_assoc_success(struct ieee80211_sub_if_data *sdata,
2857 struct cfg80211_bss *cbss,
2858 struct ieee80211_mgmt *mgmt, size_t len)
2860 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
2861 struct ieee80211_local *local = sdata->local;
2862 struct ieee80211_supported_band *sband;
2863 struct sta_info *sta;
2865 u16 capab_info, aid;
2866 struct ieee802_11_elems elems;
2867 struct ieee80211_bss_conf *bss_conf = &sdata->vif.bss_conf;
2868 const struct cfg80211_bss_ies *bss_ies = NULL;
2869 struct ieee80211_mgd_assoc_data *assoc_data = ifmgd->assoc_data;
2874 /* AssocResp and ReassocResp have identical structure */
2876 aid = le16_to_cpu(mgmt->u.assoc_resp.aid);
2877 capab_info = le16_to_cpu(mgmt->u.assoc_resp.capab_info);
2879 if ((aid & (BIT(15) | BIT(14))) != (BIT(15) | BIT(14)))
2880 sdata_info(sdata, "invalid AID value 0x%x; bits 15:14 not set\n",
2882 aid &= ~(BIT(15) | BIT(14));
2884 ifmgd->broken_ap = false;
2886 if (aid == 0 || aid > IEEE80211_MAX_AID) {
2887 sdata_info(sdata, "invalid AID value %d (out of range), turn off PS\n",
2890 ifmgd->broken_ap = true;
2893 pos = mgmt->u.assoc_resp.variable;
2894 ieee802_11_parse_elems(pos, len - (pos - (u8 *) mgmt), false, &elems);
2896 if (!elems.supp_rates) {
2897 sdata_info(sdata, "no SuppRates element in AssocResp\n");
2902 ifmgd->tdls_chan_switch_prohibited =
2903 elems.ext_capab && elems.ext_capab_len >= 5 &&
2904 (elems.ext_capab[4] & WLAN_EXT_CAPA5_TDLS_CH_SW_PROHIBITED);
2907 * Some APs are erroneously not including some information in their
2908 * (re)association response frames. Try to recover by using the data
2909 * from the beacon or probe response. This seems to afflict mobile
2910 * 2G/3G/4G wifi routers, reported models include the "Onda PN51T",
2911 * "Vodafone PocketWiFi 2", "ZTE MF60" and a similar T-Mobile device.
2913 if ((assoc_data->wmm && !elems.wmm_param) ||
2914 (!(ifmgd->flags & IEEE80211_STA_DISABLE_HT) &&
2915 (!elems.ht_cap_elem || !elems.ht_operation)) ||
2916 (!(ifmgd->flags & IEEE80211_STA_DISABLE_VHT) &&
2917 (!elems.vht_cap_elem || !elems.vht_operation))) {
2918 const struct cfg80211_bss_ies *ies;
2919 struct ieee802_11_elems bss_elems;
2922 ies = rcu_dereference(cbss->ies);
2924 bss_ies = kmemdup(ies, sizeof(*ies) + ies->len,
2930 ieee802_11_parse_elems(bss_ies->data, bss_ies->len,
2932 if (assoc_data->wmm &&
2933 !elems.wmm_param && bss_elems.wmm_param) {
2934 elems.wmm_param = bss_elems.wmm_param;
2936 "AP bug: WMM param missing from AssocResp\n");
2940 * Also check if we requested HT/VHT, otherwise the AP doesn't
2941 * have to include the IEs in the (re)association response.
2943 if (!elems.ht_cap_elem && bss_elems.ht_cap_elem &&
2944 !(ifmgd->flags & IEEE80211_STA_DISABLE_HT)) {
2945 elems.ht_cap_elem = bss_elems.ht_cap_elem;
2947 "AP bug: HT capability missing from AssocResp\n");
2949 if (!elems.ht_operation && bss_elems.ht_operation &&
2950 !(ifmgd->flags & IEEE80211_STA_DISABLE_HT)) {
2951 elems.ht_operation = bss_elems.ht_operation;
2953 "AP bug: HT operation missing from AssocResp\n");
2955 if (!elems.vht_cap_elem && bss_elems.vht_cap_elem &&
2956 !(ifmgd->flags & IEEE80211_STA_DISABLE_VHT)) {
2957 elems.vht_cap_elem = bss_elems.vht_cap_elem;
2959 "AP bug: VHT capa missing from AssocResp\n");
2961 if (!elems.vht_operation && bss_elems.vht_operation &&
2962 !(ifmgd->flags & IEEE80211_STA_DISABLE_VHT)) {
2963 elems.vht_operation = bss_elems.vht_operation;
2965 "AP bug: VHT operation missing from AssocResp\n");
2970 * We previously checked these in the beacon/probe response, so
2971 * they should be present here. This is just a safety net.
2973 if (!(ifmgd->flags & IEEE80211_STA_DISABLE_HT) &&
2974 (!elems.wmm_param || !elems.ht_cap_elem || !elems.ht_operation)) {
2976 "HT AP is missing WMM params or HT capability/operation\n");
2981 if (!(ifmgd->flags & IEEE80211_STA_DISABLE_VHT) &&
2982 (!elems.vht_cap_elem || !elems.vht_operation)) {
2984 "VHT AP is missing VHT capability/operation\n");
2989 mutex_lock(&sdata->local->sta_mtx);
2991 * station info was already allocated and inserted before
2992 * the association and should be available to us
2994 sta = sta_info_get(sdata, cbss->bssid);
2995 if (WARN_ON(!sta)) {
2996 mutex_unlock(&sdata->local->sta_mtx);
3001 sband = local->hw.wiphy->bands[ieee80211_get_sdata_band(sdata)];
3003 /* Set up internal HT/VHT capabilities */
3004 if (elems.ht_cap_elem && !(ifmgd->flags & IEEE80211_STA_DISABLE_HT))
3005 ieee80211_ht_cap_ie_to_sta_ht_cap(sdata, sband,
3006 elems.ht_cap_elem, sta);
3008 if (elems.vht_cap_elem && !(ifmgd->flags & IEEE80211_STA_DISABLE_VHT))
3009 ieee80211_vht_cap_ie_to_sta_vht_cap(sdata, sband,
3010 elems.vht_cap_elem, sta);
3013 * Some APs, e.g. Netgear WNDR3700, report invalid HT operation data
3014 * in their association response, so ignore that data for our own
3015 * configuration. If it changed since the last beacon, we'll get the
3016 * next beacon and update then.
3020 * If an operating mode notification IE is present, override the
3021 * NSS calculation (that would be done in rate_control_rate_init())
3022 * and use the # of streams from that element.
3024 if (elems.opmode_notif &&
3025 !(*elems.opmode_notif & IEEE80211_OPMODE_NOTIF_RX_NSS_TYPE_BF)) {
3028 nss = *elems.opmode_notif & IEEE80211_OPMODE_NOTIF_RX_NSS_MASK;
3029 nss >>= IEEE80211_OPMODE_NOTIF_RX_NSS_SHIFT;
3031 sta->sta.rx_nss = nss;
3034 rate_control_rate_init(sta);
3036 if (ifmgd->flags & IEEE80211_STA_MFP_ENABLED) {
3037 set_sta_flag(sta, WLAN_STA_MFP);
3038 sta->sta.mfp = true;
3040 sta->sta.mfp = false;
3043 sta->sta.wme = elems.wmm_param && local->hw.queues >= IEEE80211_NUM_ACS;
3045 err = sta_info_move_state(sta, IEEE80211_STA_ASSOC);
3046 if (!err && !(ifmgd->flags & IEEE80211_STA_CONTROL_PORT))
3047 err = sta_info_move_state(sta, IEEE80211_STA_AUTHORIZED);
3050 "failed to move station %pM to desired state\n",
3052 WARN_ON(__sta_info_destroy(sta));
3053 mutex_unlock(&sdata->local->sta_mtx);
3058 mutex_unlock(&sdata->local->sta_mtx);
3061 * Always handle WMM once after association regardless
3062 * of the first value the AP uses. Setting -1 here has
3063 * that effect because the AP values is an unsigned
3066 ifmgd->wmm_last_param_set = -1;
3068 if (ifmgd->flags & IEEE80211_STA_DISABLE_WMM) {
3069 ieee80211_set_wmm_default(sdata, false, false);
3070 } else if (!ieee80211_sta_wmm_params(local, sdata, elems.wmm_param,
3071 elems.wmm_param_len)) {
3072 /* still enable QoS since we might have HT/VHT */
3073 ieee80211_set_wmm_default(sdata, false, true);
3074 /* set the disable-WMM flag in this case to disable
3075 * tracking WMM parameter changes in the beacon if
3076 * the parameters weren't actually valid. Doing so
3077 * avoids changing parameters very strangely when
3078 * the AP is going back and forth between valid and
3079 * invalid parameters.
3081 ifmgd->flags |= IEEE80211_STA_DISABLE_WMM;
3083 changed |= BSS_CHANGED_QOS;
3085 /* set AID and assoc capability,
3086 * ieee80211_set_associated() will tell the driver */
3087 bss_conf->aid = aid;
3088 bss_conf->assoc_capability = capab_info;
3089 ieee80211_set_associated(sdata, cbss, changed);
3092 * If we're using 4-addr mode, let the AP know that we're
3093 * doing so, so that it can create the STA VLAN on its side
3095 if (ifmgd->use_4addr)
3096 ieee80211_send_4addr_nullfunc(local, sdata);
3099 * Start timer to probe the connection to the AP now.
3100 * Also start the timer that will detect beacon loss.
3102 ieee80211_sta_rx_notify(sdata, (struct ieee80211_hdr *)mgmt);
3103 ieee80211_sta_reset_beacon_monitor(sdata);
3111 static void ieee80211_rx_mgmt_assoc_resp(struct ieee80211_sub_if_data *sdata,
3112 struct ieee80211_mgmt *mgmt,
3115 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
3116 struct ieee80211_mgd_assoc_data *assoc_data = ifmgd->assoc_data;
3117 u16 capab_info, status_code, aid;
3118 struct ieee802_11_elems elems;
3119 int ac, uapsd_queues = -1;
3122 struct cfg80211_bss *bss;
3123 struct ieee80211_event event = {
3125 .u.mlme.data = ASSOC_EVENT,
3128 sdata_assert_lock(sdata);
3132 if (!ether_addr_equal(assoc_data->bss->bssid, mgmt->bssid))
3136 * AssocResp and ReassocResp have identical structure, so process both
3137 * of them in this function.
3143 reassoc = ieee80211_is_reassoc_req(mgmt->frame_control);
3144 capab_info = le16_to_cpu(mgmt->u.assoc_resp.capab_info);
3145 status_code = le16_to_cpu(mgmt->u.assoc_resp.status_code);
3146 aid = le16_to_cpu(mgmt->u.assoc_resp.aid);
3149 "RX %sssocResp from %pM (capab=0x%x status=%d aid=%d)\n",
3150 reassoc ? "Rea" : "A", mgmt->sa,
3151 capab_info, status_code, (u16)(aid & ~(BIT(15) | BIT(14))));
3153 pos = mgmt->u.assoc_resp.variable;
3154 ieee802_11_parse_elems(pos, len - (pos - (u8 *) mgmt), false, &elems);
3156 if (status_code == WLAN_STATUS_ASSOC_REJECTED_TEMPORARILY &&
3157 elems.timeout_int &&
3158 elems.timeout_int->type == WLAN_TIMEOUT_ASSOC_COMEBACK) {
3160 tu = le32_to_cpu(elems.timeout_int->value);
3161 ms = tu * 1024 / 1000;
3163 "%pM rejected association temporarily; comeback duration %u TU (%u ms)\n",
3165 assoc_data->timeout = jiffies + msecs_to_jiffies(ms);
3166 assoc_data->timeout_started = true;
3167 if (ms > IEEE80211_ASSOC_TIMEOUT)
3168 run_again(sdata, assoc_data->timeout);
3172 bss = assoc_data->bss;
3174 if (status_code != WLAN_STATUS_SUCCESS) {
3175 sdata_info(sdata, "%pM denied association (code=%d)\n",
3176 mgmt->sa, status_code);
3177 ieee80211_destroy_assoc_data(sdata, false);
3178 event.u.mlme.status = MLME_DENIED;
3179 event.u.mlme.reason = status_code;
3180 drv_event_callback(sdata->local, sdata, &event);
3182 if (!ieee80211_assoc_success(sdata, bss, mgmt, len)) {
3183 /* oops -- internal error -- send timeout for now */
3184 ieee80211_destroy_assoc_data(sdata, false);
3185 cfg80211_assoc_timeout(sdata->dev, bss);
3188 event.u.mlme.status = MLME_SUCCESS;
3189 drv_event_callback(sdata->local, sdata, &event);
3190 sdata_info(sdata, "associated\n");
3193 * destroy assoc_data afterwards, as otherwise an idle
3194 * recalc after assoc_data is NULL but before associated
3195 * is set can cause the interface to go idle
3197 ieee80211_destroy_assoc_data(sdata, true);
3199 /* get uapsd queues configuration */
3201 for (ac = 0; ac < IEEE80211_NUM_ACS; ac++)
3202 if (sdata->tx_conf[ac].uapsd)
3203 uapsd_queues |= BIT(ac);
3206 cfg80211_rx_assoc_resp(sdata->dev, bss, (u8 *)mgmt, len, uapsd_queues);
3209 static void ieee80211_rx_bss_info(struct ieee80211_sub_if_data *sdata,
3210 struct ieee80211_mgmt *mgmt, size_t len,
3211 struct ieee80211_rx_status *rx_status,
3212 struct ieee802_11_elems *elems)
3214 struct ieee80211_local *local = sdata->local;
3215 struct ieee80211_bss *bss;
3216 struct ieee80211_channel *channel;
3218 sdata_assert_lock(sdata);
3220 channel = ieee80211_get_channel(local->hw.wiphy, rx_status->freq);
3224 bss = ieee80211_bss_info_update(local, rx_status, mgmt, len, elems,
3227 sdata->vif.bss_conf.beacon_rate = bss->beacon_rate;
3228 ieee80211_rx_bss_put(local, bss);
3233 static void ieee80211_rx_mgmt_probe_resp(struct ieee80211_sub_if_data *sdata,
3234 struct sk_buff *skb)
3236 struct ieee80211_mgmt *mgmt = (void *)skb->data;
3237 struct ieee80211_if_managed *ifmgd;
3238 struct ieee80211_rx_status *rx_status = (void *) skb->cb;
3239 size_t baselen, len = skb->len;
3240 struct ieee802_11_elems elems;
3242 ifmgd = &sdata->u.mgd;
3244 sdata_assert_lock(sdata);
3246 if (!ether_addr_equal(mgmt->da, sdata->vif.addr))
3247 return; /* ignore ProbeResp to foreign address */
3249 baselen = (u8 *) mgmt->u.probe_resp.variable - (u8 *) mgmt;
3253 ieee802_11_parse_elems(mgmt->u.probe_resp.variable, len - baselen,
3256 ieee80211_rx_bss_info(sdata, mgmt, len, rx_status, &elems);
3258 if (ifmgd->associated &&
3259 ether_addr_equal(mgmt->bssid, ifmgd->associated->bssid))
3260 ieee80211_reset_ap_probe(sdata);
3264 * This is the canonical list of information elements we care about,
3265 * the filter code also gives us all changes to the Microsoft OUI
3266 * (00:50:F2) vendor IE which is used for WMM which we need to track,
3267 * as well as the DTPC IE (part of the Cisco OUI) used for signaling
3268 * changes to requested client power.
3270 * We implement beacon filtering in software since that means we can
3271 * avoid processing the frame here and in cfg80211, and userspace
3272 * will not be able to tell whether the hardware supports it or not.
3274 * XXX: This list needs to be dynamic -- userspace needs to be able to
3275 * add items it requires. It also needs to be able to tell us to
3276 * look out for other vendor IEs.
3278 static const u64 care_about_ies =
3279 (1ULL << WLAN_EID_COUNTRY) |
3280 (1ULL << WLAN_EID_ERP_INFO) |
3281 (1ULL << WLAN_EID_CHANNEL_SWITCH) |
3282 (1ULL << WLAN_EID_PWR_CONSTRAINT) |
3283 (1ULL << WLAN_EID_HT_CAPABILITY) |
3284 (1ULL << WLAN_EID_HT_OPERATION) |
3285 (1ULL << WLAN_EID_EXT_CHANSWITCH_ANN);
3287 static void ieee80211_rx_mgmt_beacon(struct ieee80211_sub_if_data *sdata,
3288 struct ieee80211_mgmt *mgmt, size_t len,
3289 struct ieee80211_rx_status *rx_status)
3291 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
3292 struct ieee80211_bss_conf *bss_conf = &sdata->vif.bss_conf;
3294 struct ieee802_11_elems elems;
3295 struct ieee80211_local *local = sdata->local;
3296 struct ieee80211_chanctx_conf *chanctx_conf;
3297 struct ieee80211_channel *chan;
3298 struct sta_info *sta;
3304 u8 deauth_buf[IEEE80211_DEAUTH_FRAME_LEN];
3306 sdata_assert_lock(sdata);
3308 /* Process beacon from the current BSS */
3309 baselen = (u8 *) mgmt->u.beacon.variable - (u8 *) mgmt;
3314 chanctx_conf = rcu_dereference(sdata->vif.chanctx_conf);
3315 if (!chanctx_conf) {
3320 if (rx_status->freq != chanctx_conf->def.chan->center_freq) {
3324 chan = chanctx_conf->def.chan;
3327 if (ifmgd->assoc_data && ifmgd->assoc_data->need_beacon &&
3328 ether_addr_equal(mgmt->bssid, ifmgd->assoc_data->bss->bssid)) {
3329 ieee802_11_parse_elems(mgmt->u.beacon.variable,
3330 len - baselen, false, &elems);
3332 ieee80211_rx_bss_info(sdata, mgmt, len, rx_status, &elems);
3333 if (elems.tim && !elems.parse_error) {
3334 const struct ieee80211_tim_ie *tim_ie = elems.tim;
3335 ifmgd->dtim_period = tim_ie->dtim_period;
3337 ifmgd->have_beacon = true;
3338 ifmgd->assoc_data->need_beacon = false;
3339 if (ieee80211_hw_check(&local->hw, TIMING_BEACON_ONLY)) {
3340 sdata->vif.bss_conf.sync_tsf =
3341 le64_to_cpu(mgmt->u.beacon.timestamp);
3342 sdata->vif.bss_conf.sync_device_ts =
3343 rx_status->device_timestamp;
3345 sdata->vif.bss_conf.sync_dtim_count =
3346 elems.tim->dtim_count;
3348 sdata->vif.bss_conf.sync_dtim_count = 0;
3350 /* continue assoc process */
3351 ifmgd->assoc_data->timeout = jiffies;
3352 ifmgd->assoc_data->timeout_started = true;
3353 run_again(sdata, ifmgd->assoc_data->timeout);
3357 if (!ifmgd->associated ||
3358 !ether_addr_equal(mgmt->bssid, ifmgd->associated->bssid))
3360 bssid = ifmgd->associated->bssid;
3362 /* Track average RSSI from the Beacon frames of the current AP */
3363 if (ifmgd->flags & IEEE80211_STA_RESET_SIGNAL_AVE) {
3364 ifmgd->flags &= ~IEEE80211_STA_RESET_SIGNAL_AVE;
3365 ewma_beacon_signal_init(&ifmgd->ave_beacon_signal);
3366 ifmgd->last_cqm_event_signal = 0;
3367 ifmgd->count_beacon_signal = 1;
3368 ifmgd->last_ave_beacon_signal = 0;
3370 ifmgd->count_beacon_signal++;
3373 ewma_beacon_signal_add(&ifmgd->ave_beacon_signal, -rx_status->signal);
3375 if (ifmgd->rssi_min_thold != ifmgd->rssi_max_thold &&
3376 ifmgd->count_beacon_signal >= IEEE80211_SIGNAL_AVE_MIN_COUNT) {
3377 int sig = -ewma_beacon_signal_read(&ifmgd->ave_beacon_signal);
3378 int last_sig = ifmgd->last_ave_beacon_signal;
3379 struct ieee80211_event event = {
3384 * if signal crosses either of the boundaries, invoke callback
3385 * with appropriate parameters
3387 if (sig > ifmgd->rssi_max_thold &&
3388 (last_sig <= ifmgd->rssi_min_thold || last_sig == 0)) {
3389 ifmgd->last_ave_beacon_signal = sig;
3390 event.u.rssi.data = RSSI_EVENT_HIGH;
3391 drv_event_callback(local, sdata, &event);
3392 } else if (sig < ifmgd->rssi_min_thold &&
3393 (last_sig >= ifmgd->rssi_max_thold ||
3395 ifmgd->last_ave_beacon_signal = sig;
3396 event.u.rssi.data = RSSI_EVENT_LOW;
3397 drv_event_callback(local, sdata, &event);
3401 if (bss_conf->cqm_rssi_thold &&
3402 ifmgd->count_beacon_signal >= IEEE80211_SIGNAL_AVE_MIN_COUNT &&
3403 !(sdata->vif.driver_flags & IEEE80211_VIF_SUPPORTS_CQM_RSSI)) {
3404 int sig = -ewma_beacon_signal_read(&ifmgd->ave_beacon_signal);
3405 int last_event = ifmgd->last_cqm_event_signal;
3406 int thold = bss_conf->cqm_rssi_thold;
3407 int hyst = bss_conf->cqm_rssi_hyst;
3410 (last_event == 0 || sig < last_event - hyst)) {
3411 ifmgd->last_cqm_event_signal = sig;
3412 ieee80211_cqm_rssi_notify(
3414 NL80211_CQM_RSSI_THRESHOLD_EVENT_LOW,
3416 } else if (sig > thold &&
3417 (last_event == 0 || sig > last_event + hyst)) {
3418 ifmgd->last_cqm_event_signal = sig;
3419 ieee80211_cqm_rssi_notify(
3421 NL80211_CQM_RSSI_THRESHOLD_EVENT_HIGH,
3426 if (ifmgd->flags & IEEE80211_STA_CONNECTION_POLL) {
3427 mlme_dbg_ratelimited(sdata,
3428 "cancelling AP probe due to a received beacon\n");
3429 ieee80211_reset_ap_probe(sdata);
3433 * Push the beacon loss detection into the future since
3434 * we are processing a beacon from the AP just now.
3436 ieee80211_sta_reset_beacon_monitor(sdata);
3438 ncrc = crc32_be(0, (void *)&mgmt->u.beacon.beacon_int, 4);
3439 ncrc = ieee802_11_parse_elems_crc(mgmt->u.beacon.variable,
3440 len - baselen, false, &elems,
3441 care_about_ies, ncrc);
3443 if (ieee80211_hw_check(&local->hw, PS_NULLFUNC_STACK) &&
3444 ieee80211_check_tim(elems.tim, elems.tim_len, ifmgd->aid)) {
3445 if (local->hw.conf.dynamic_ps_timeout > 0) {
3446 if (local->hw.conf.flags & IEEE80211_CONF_PS) {
3447 local->hw.conf.flags &= ~IEEE80211_CONF_PS;
3448 ieee80211_hw_config(local,
3449 IEEE80211_CONF_CHANGE_PS);
3451 ieee80211_send_nullfunc(local, sdata, false);
3452 } else if (!local->pspolling && sdata->u.mgd.powersave) {
3453 local->pspolling = true;
3456 * Here is assumed that the driver will be
3457 * able to send ps-poll frame and receive a
3458 * response even though power save mode is
3459 * enabled, but some drivers might require
3460 * to disable power save here. This needs
3461 * to be investigated.
3463 ieee80211_send_pspoll(local, sdata);
3467 if (sdata->vif.p2p ||
3468 sdata->vif.driver_flags & IEEE80211_VIF_GET_NOA_UPDATE) {
3469 struct ieee80211_p2p_noa_attr noa = {};
3472 ret = cfg80211_get_p2p_attr(mgmt->u.beacon.variable,
3474 IEEE80211_P2P_ATTR_ABSENCE_NOTICE,
3475 (u8 *) &noa, sizeof(noa));
3477 if (sdata->u.mgd.p2p_noa_index != noa.index) {
3478 /* valid noa_attr and index changed */
3479 sdata->u.mgd.p2p_noa_index = noa.index;
3480 memcpy(&bss_conf->p2p_noa_attr, &noa, sizeof(noa));
3481 changed |= BSS_CHANGED_P2P_PS;
3483 * make sure we update all information, the CRC
3484 * mechanism doesn't look at P2P attributes.
3486 ifmgd->beacon_crc_valid = false;
3488 } else if (sdata->u.mgd.p2p_noa_index != -1) {
3489 /* noa_attr not found and we had valid noa_attr before */
3490 sdata->u.mgd.p2p_noa_index = -1;
3491 memset(&bss_conf->p2p_noa_attr, 0, sizeof(bss_conf->p2p_noa_attr));
3492 changed |= BSS_CHANGED_P2P_PS;
3493 ifmgd->beacon_crc_valid = false;
3497 if (ifmgd->csa_waiting_bcn)
3498 ieee80211_chswitch_post_beacon(sdata);
3501 * Update beacon timing and dtim count on every beacon appearance. This
3502 * will allow the driver to use the most updated values. Do it before
3503 * comparing this one with last received beacon.
3504 * IMPORTANT: These parameters would possibly be out of sync by the time
3505 * the driver will use them. The synchronized view is currently
3506 * guaranteed only in certain callbacks.
3508 if (ieee80211_hw_check(&local->hw, TIMING_BEACON_ONLY)) {
3509 sdata->vif.bss_conf.sync_tsf =
3510 le64_to_cpu(mgmt->u.beacon.timestamp);
3511 sdata->vif.bss_conf.sync_device_ts =
3512 rx_status->device_timestamp;
3514 sdata->vif.bss_conf.sync_dtim_count =
3515 elems.tim->dtim_count;
3517 sdata->vif.bss_conf.sync_dtim_count = 0;
3520 if (ncrc == ifmgd->beacon_crc && ifmgd->beacon_crc_valid)
3522 ifmgd->beacon_crc = ncrc;
3523 ifmgd->beacon_crc_valid = true;
3525 ieee80211_rx_bss_info(sdata, mgmt, len, rx_status, &elems);
3527 ieee80211_sta_process_chanswitch(sdata, rx_status->mactime,
3528 rx_status->device_timestamp,
3531 if (!(ifmgd->flags & IEEE80211_STA_DISABLE_WMM) &&
3532 ieee80211_sta_wmm_params(local, sdata, elems.wmm_param,
3533 elems.wmm_param_len))
3534 changed |= BSS_CHANGED_QOS;
3537 * If we haven't had a beacon before, tell the driver about the
3538 * DTIM period (and beacon timing if desired) now.
3540 if (!ifmgd->have_beacon) {
3541 /* a few bogus AP send dtim_period = 0 or no TIM IE */
3543 bss_conf->dtim_period = elems.tim->dtim_period ?: 1;
3545 bss_conf->dtim_period = 1;
3547 changed |= BSS_CHANGED_BEACON_INFO;
3548 ifmgd->have_beacon = true;
3550 mutex_lock(&local->iflist_mtx);
3551 ieee80211_recalc_ps(local);
3552 mutex_unlock(&local->iflist_mtx);
3554 ieee80211_recalc_ps_vif(sdata);
3557 if (elems.erp_info) {
3559 erp_value = elems.erp_info[0];
3563 changed |= ieee80211_handle_bss_capability(sdata,
3564 le16_to_cpu(mgmt->u.beacon.capab_info),
3565 erp_valid, erp_value);
3567 mutex_lock(&local->sta_mtx);
3568 sta = sta_info_get(sdata, bssid);
3570 if (ieee80211_config_bw(sdata, sta,
3571 elems.ht_cap_elem, elems.ht_operation,
3572 elems.vht_operation, bssid, &changed)) {
3573 mutex_unlock(&local->sta_mtx);
3574 ieee80211_set_disassoc(sdata, IEEE80211_STYPE_DEAUTH,
3575 WLAN_REASON_DEAUTH_LEAVING,
3577 ieee80211_report_disconnect(sdata, deauth_buf,
3578 sizeof(deauth_buf), true,
3579 WLAN_REASON_DEAUTH_LEAVING);
3583 if (sta && elems.opmode_notif)
3584 ieee80211_vht_handle_opmode(sdata, sta, *elems.opmode_notif,
3586 mutex_unlock(&local->sta_mtx);
3588 changed |= ieee80211_handle_pwr_constr(sdata, chan, mgmt,
3590 elems.country_elem_len,
3591 elems.pwr_constr_elem,
3592 elems.cisco_dtpc_elem);
3594 ieee80211_bss_info_change_notify(sdata, changed);
3597 void ieee80211_sta_rx_queued_mgmt(struct ieee80211_sub_if_data *sdata,
3598 struct sk_buff *skb)
3600 struct ieee80211_rx_status *rx_status;
3601 struct ieee80211_mgmt *mgmt;
3603 struct ieee802_11_elems elems;
3606 rx_status = (struct ieee80211_rx_status *) skb->cb;
3607 mgmt = (struct ieee80211_mgmt *) skb->data;
3608 fc = le16_to_cpu(mgmt->frame_control);
3612 switch (fc & IEEE80211_FCTL_STYPE) {
3613 case IEEE80211_STYPE_BEACON:
3614 ieee80211_rx_mgmt_beacon(sdata, mgmt, skb->len, rx_status);
3616 case IEEE80211_STYPE_PROBE_RESP:
3617 ieee80211_rx_mgmt_probe_resp(sdata, skb);
3619 case IEEE80211_STYPE_AUTH:
3620 ieee80211_rx_mgmt_auth(sdata, mgmt, skb->len);
3622 case IEEE80211_STYPE_DEAUTH:
3623 ieee80211_rx_mgmt_deauth(sdata, mgmt, skb->len);
3625 case IEEE80211_STYPE_DISASSOC:
3626 ieee80211_rx_mgmt_disassoc(sdata, mgmt, skb->len);
3628 case IEEE80211_STYPE_ASSOC_RESP:
3629 case IEEE80211_STYPE_REASSOC_RESP:
3630 ieee80211_rx_mgmt_assoc_resp(sdata, mgmt, skb->len);
3632 case IEEE80211_STYPE_ACTION:
3633 if (mgmt->u.action.category == WLAN_CATEGORY_SPECTRUM_MGMT) {
3634 ies_len = skb->len -
3635 offsetof(struct ieee80211_mgmt,
3636 u.action.u.chan_switch.variable);
3641 ieee802_11_parse_elems(
3642 mgmt->u.action.u.chan_switch.variable,
3643 ies_len, true, &elems);
3645 if (elems.parse_error)
3648 ieee80211_sta_process_chanswitch(sdata,
3650 rx_status->device_timestamp,
3652 } else if (mgmt->u.action.category == WLAN_CATEGORY_PUBLIC) {
3653 ies_len = skb->len -
3654 offsetof(struct ieee80211_mgmt,
3655 u.action.u.ext_chan_switch.variable);
3660 ieee802_11_parse_elems(
3661 mgmt->u.action.u.ext_chan_switch.variable,
3662 ies_len, true, &elems);
3664 if (elems.parse_error)
3667 /* for the handling code pretend this was also an IE */
3668 elems.ext_chansw_ie =
3669 &mgmt->u.action.u.ext_chan_switch.data;
3671 ieee80211_sta_process_chanswitch(sdata,
3673 rx_status->device_timestamp,
3678 sdata_unlock(sdata);
3681 static void ieee80211_sta_timer(unsigned long data)
3683 struct ieee80211_sub_if_data *sdata =
3684 (struct ieee80211_sub_if_data *) data;
3686 ieee80211_queue_work(&sdata->local->hw, &sdata->work);
3689 static void ieee80211_sta_connection_lost(struct ieee80211_sub_if_data *sdata,
3690 u8 *bssid, u8 reason, bool tx)
3692 u8 frame_buf[IEEE80211_DEAUTH_FRAME_LEN];
3694 ieee80211_set_disassoc(sdata, IEEE80211_STYPE_DEAUTH, reason,
3697 ieee80211_report_disconnect(sdata, frame_buf, sizeof(frame_buf), true,
3701 static int ieee80211_auth(struct ieee80211_sub_if_data *sdata)
3703 struct ieee80211_local *local = sdata->local;
3704 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
3705 struct ieee80211_mgd_auth_data *auth_data = ifmgd->auth_data;
3710 sdata_assert_lock(sdata);
3712 if (WARN_ON_ONCE(!auth_data))
3717 if (auth_data->tries > IEEE80211_AUTH_MAX_TRIES) {
3718 sdata_info(sdata, "authentication with %pM timed out\n",
3719 auth_data->bss->bssid);
3722 * Most likely AP is not in the range so remove the
3723 * bss struct for that AP.
3725 cfg80211_unlink_bss(local->hw.wiphy, auth_data->bss);
3730 drv_mgd_prepare_tx(local, sdata);
3732 sdata_info(sdata, "send auth to %pM (try %d/%d)\n",
3733 auth_data->bss->bssid, auth_data->tries,
3734 IEEE80211_AUTH_MAX_TRIES);
3736 auth_data->expected_transaction = 2;
3738 if (auth_data->algorithm == WLAN_AUTH_SAE) {
3739 trans = auth_data->sae_trans;
3740 status = auth_data->sae_status;
3741 auth_data->expected_transaction = trans;
3744 if (ieee80211_hw_check(&local->hw, REPORTS_TX_ACK_STATUS))
3745 tx_flags = IEEE80211_TX_CTL_REQ_TX_STATUS |
3746 IEEE80211_TX_INTFL_MLME_CONN_TX;
3748 ieee80211_send_auth(sdata, trans, auth_data->algorithm, status,
3749 auth_data->data, auth_data->data_len,
3750 auth_data->bss->bssid,
3751 auth_data->bss->bssid, NULL, 0, 0,
3754 if (tx_flags == 0) {
3755 auth_data->timeout = jiffies + IEEE80211_AUTH_TIMEOUT;
3756 auth_data->timeout_started = true;
3757 run_again(sdata, auth_data->timeout);
3759 auth_data->timeout =
3760 round_jiffies_up(jiffies + IEEE80211_AUTH_TIMEOUT_LONG);
3761 auth_data->timeout_started = true;
3762 run_again(sdata, auth_data->timeout);
3768 static int ieee80211_do_assoc(struct ieee80211_sub_if_data *sdata)
3770 struct ieee80211_mgd_assoc_data *assoc_data = sdata->u.mgd.assoc_data;
3771 struct ieee80211_local *local = sdata->local;
3773 sdata_assert_lock(sdata);
3775 assoc_data->tries++;
3776 if (assoc_data->tries > IEEE80211_ASSOC_MAX_TRIES) {
3777 sdata_info(sdata, "association with %pM timed out\n",
3778 assoc_data->bss->bssid);
3781 * Most likely AP is not in the range so remove the
3782 * bss struct for that AP.
3784 cfg80211_unlink_bss(local->hw.wiphy, assoc_data->bss);
3789 sdata_info(sdata, "associate with %pM (try %d/%d)\n",
3790 assoc_data->bss->bssid, assoc_data->tries,
3791 IEEE80211_ASSOC_MAX_TRIES);
3792 ieee80211_send_assoc(sdata);
3794 if (!ieee80211_hw_check(&local->hw, REPORTS_TX_ACK_STATUS)) {
3795 assoc_data->timeout = jiffies + IEEE80211_ASSOC_TIMEOUT;
3796 assoc_data->timeout_started = true;
3797 run_again(sdata, assoc_data->timeout);
3799 assoc_data->timeout =
3800 round_jiffies_up(jiffies +
3801 IEEE80211_ASSOC_TIMEOUT_LONG);
3802 assoc_data->timeout_started = true;
3803 run_again(sdata, assoc_data->timeout);
3809 void ieee80211_mgd_conn_tx_status(struct ieee80211_sub_if_data *sdata,
3810 __le16 fc, bool acked)
3812 struct ieee80211_local *local = sdata->local;
3814 sdata->u.mgd.status_fc = fc;
3815 sdata->u.mgd.status_acked = acked;
3816 sdata->u.mgd.status_received = true;
3818 ieee80211_queue_work(&local->hw, &sdata->work);
3821 void ieee80211_sta_work(struct ieee80211_sub_if_data *sdata)
3823 struct ieee80211_local *local = sdata->local;
3824 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
3828 if (ifmgd->status_received) {
3829 __le16 fc = ifmgd->status_fc;
3830 bool status_acked = ifmgd->status_acked;
3832 ifmgd->status_received = false;
3833 if (ifmgd->auth_data && ieee80211_is_auth(fc)) {
3835 ifmgd->auth_data->timeout =
3836 jiffies + IEEE80211_AUTH_TIMEOUT_SHORT;
3837 run_again(sdata, ifmgd->auth_data->timeout);
3839 ifmgd->auth_data->timeout = jiffies - 1;
3841 ifmgd->auth_data->timeout_started = true;
3842 } else if (ifmgd->assoc_data &&
3843 (ieee80211_is_assoc_req(fc) ||
3844 ieee80211_is_reassoc_req(fc))) {
3846 ifmgd->assoc_data->timeout =
3847 jiffies + IEEE80211_ASSOC_TIMEOUT_SHORT;
3848 run_again(sdata, ifmgd->assoc_data->timeout);
3850 ifmgd->assoc_data->timeout = jiffies - 1;
3852 ifmgd->assoc_data->timeout_started = true;
3856 if (ifmgd->auth_data && ifmgd->auth_data->timeout_started &&
3857 time_after(jiffies, ifmgd->auth_data->timeout)) {
3858 if (ifmgd->auth_data->done) {
3860 * ok ... we waited for assoc but userspace didn't,
3861 * so let's just kill the auth data
3863 ieee80211_destroy_auth_data(sdata, false);
3864 } else if (ieee80211_auth(sdata)) {
3866 struct ieee80211_event event = {
3868 .u.mlme.data = AUTH_EVENT,
3869 .u.mlme.status = MLME_TIMEOUT,
3872 memcpy(bssid, ifmgd->auth_data->bss->bssid, ETH_ALEN);
3874 ieee80211_destroy_auth_data(sdata, false);
3876 cfg80211_auth_timeout(sdata->dev, bssid);
3877 drv_event_callback(sdata->local, sdata, &event);
3879 } else if (ifmgd->auth_data && ifmgd->auth_data->timeout_started)
3880 run_again(sdata, ifmgd->auth_data->timeout);
3882 if (ifmgd->assoc_data && ifmgd->assoc_data->timeout_started &&
3883 time_after(jiffies, ifmgd->assoc_data->timeout)) {
3884 if ((ifmgd->assoc_data->need_beacon && !ifmgd->have_beacon) ||
3885 ieee80211_do_assoc(sdata)) {
3886 struct cfg80211_bss *bss = ifmgd->assoc_data->bss;
3887 struct ieee80211_event event = {
3889 .u.mlme.data = ASSOC_EVENT,
3890 .u.mlme.status = MLME_TIMEOUT,
3893 ieee80211_destroy_assoc_data(sdata, false);
3894 cfg80211_assoc_timeout(sdata->dev, bss);
3895 drv_event_callback(sdata->local, sdata, &event);
3897 } else if (ifmgd->assoc_data && ifmgd->assoc_data->timeout_started)
3898 run_again(sdata, ifmgd->assoc_data->timeout);
3900 if (ifmgd->flags & IEEE80211_STA_CONNECTION_POLL &&
3901 ifmgd->associated) {
3905 memcpy(bssid, ifmgd->associated->bssid, ETH_ALEN);
3907 if (ieee80211_hw_check(&local->hw, REPORTS_TX_ACK_STATUS))
3908 max_tries = max_nullfunc_tries;
3910 max_tries = max_probe_tries;
3912 /* ACK received for nullfunc probing frame */
3913 if (!ifmgd->probe_send_count)
3914 ieee80211_reset_ap_probe(sdata);
3915 else if (ifmgd->nullfunc_failed) {
3916 if (ifmgd->probe_send_count < max_tries) {
3918 "No ack for nullfunc frame to AP %pM, try %d/%i\n",
3919 bssid, ifmgd->probe_send_count,
3921 ieee80211_mgd_probe_ap_send(sdata);
3924 "No ack for nullfunc frame to AP %pM, disconnecting.\n",
3926 ieee80211_sta_connection_lost(sdata, bssid,
3927 WLAN_REASON_DISASSOC_DUE_TO_INACTIVITY,
3930 } else if (time_is_after_jiffies(ifmgd->probe_timeout))
3931 run_again(sdata, ifmgd->probe_timeout);
3932 else if (ieee80211_hw_check(&local->hw, REPORTS_TX_ACK_STATUS)) {
3934 "Failed to send nullfunc to AP %pM after %dms, disconnecting\n",
3935 bssid, probe_wait_ms);
3936 ieee80211_sta_connection_lost(sdata, bssid,
3937 WLAN_REASON_DISASSOC_DUE_TO_INACTIVITY, false);
3938 } else if (ifmgd->probe_send_count < max_tries) {
3940 "No probe response from AP %pM after %dms, try %d/%i\n",
3941 bssid, probe_wait_ms,
3942 ifmgd->probe_send_count, max_tries);
3943 ieee80211_mgd_probe_ap_send(sdata);
3946 * We actually lost the connection ... or did we?
3949 wiphy_debug(local->hw.wiphy,
3950 "%s: No probe response from AP %pM"
3951 " after %dms, disconnecting.\n",
3953 bssid, probe_wait_ms);
3955 ieee80211_sta_connection_lost(sdata, bssid,
3956 WLAN_REASON_DISASSOC_DUE_TO_INACTIVITY, false);
3960 sdata_unlock(sdata);
3963 static void ieee80211_sta_bcn_mon_timer(unsigned long data)
3965 struct ieee80211_sub_if_data *sdata =
3966 (struct ieee80211_sub_if_data *) data;
3967 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
3969 if (sdata->vif.csa_active && !ifmgd->csa_waiting_bcn)
3972 sdata->u.mgd.connection_loss = false;
3973 ieee80211_queue_work(&sdata->local->hw,
3974 &sdata->u.mgd.beacon_connection_loss_work);
3977 static void ieee80211_sta_conn_mon_timer(unsigned long data)
3979 struct ieee80211_sub_if_data *sdata =
3980 (struct ieee80211_sub_if_data *) data;
3981 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
3982 struct ieee80211_local *local = sdata->local;
3984 if (sdata->vif.csa_active && !ifmgd->csa_waiting_bcn)
3987 ieee80211_queue_work(&local->hw, &ifmgd->monitor_work);
3990 static void ieee80211_sta_monitor_work(struct work_struct *work)
3992 struct ieee80211_sub_if_data *sdata =
3993 container_of(work, struct ieee80211_sub_if_data,
3994 u.mgd.monitor_work);
3996 ieee80211_mgd_probe_ap(sdata, false);
3999 static void ieee80211_restart_sta_timer(struct ieee80211_sub_if_data *sdata)
4001 if (sdata->vif.type == NL80211_IFTYPE_STATION) {
4002 __ieee80211_stop_poll(sdata);
4004 /* let's probe the connection once */
4005 if (!ieee80211_hw_check(&sdata->local->hw, CONNECTION_MONITOR))
4006 ieee80211_queue_work(&sdata->local->hw,
4007 &sdata->u.mgd.monitor_work);
4012 void ieee80211_mgd_quiesce(struct ieee80211_sub_if_data *sdata)
4014 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
4015 u8 frame_buf[IEEE80211_DEAUTH_FRAME_LEN];
4019 if (ifmgd->auth_data || ifmgd->assoc_data) {
4020 const u8 *bssid = ifmgd->auth_data ?
4021 ifmgd->auth_data->bss->bssid :
4022 ifmgd->assoc_data->bss->bssid;
4025 * If we are trying to authenticate / associate while suspending,
4026 * cfg80211 won't know and won't actually abort those attempts,
4027 * thus we need to do that ourselves.
4029 ieee80211_send_deauth_disassoc(sdata, bssid,
4030 IEEE80211_STYPE_DEAUTH,
4031 WLAN_REASON_DEAUTH_LEAVING,
4033 if (ifmgd->assoc_data)
4034 ieee80211_destroy_assoc_data(sdata, false);
4035 if (ifmgd->auth_data)
4036 ieee80211_destroy_auth_data(sdata, false);
4037 cfg80211_tx_mlme_mgmt(sdata->dev, frame_buf,
4038 IEEE80211_DEAUTH_FRAME_LEN);
4041 /* This is a bit of a hack - we should find a better and more generic
4042 * solution to this. Normally when suspending, cfg80211 will in fact
4043 * deauthenticate. However, it doesn't (and cannot) stop an ongoing
4044 * auth (not so important) or assoc (this is the problem) process.
4046 * As a consequence, it can happen that we are in the process of both
4047 * associating and suspending, and receive an association response
4048 * after cfg80211 has checked if it needs to disconnect, but before
4049 * we actually set the flag to drop incoming frames. This will then
4050 * cause the workqueue flush to process the association response in
4051 * the suspend, resulting in a successful association just before it
4052 * tries to remove the interface from the driver, which now though
4053 * has a channel context assigned ... this results in issues.
4055 * To work around this (for now) simply deauth here again if we're
4058 if (ifmgd->associated && !sdata->local->wowlan) {
4060 struct cfg80211_deauth_request req = {
4061 .reason_code = WLAN_REASON_DEAUTH_LEAVING,
4065 memcpy(bssid, ifmgd->associated->bssid, ETH_ALEN);
4066 ieee80211_mgd_deauth(sdata, &req);
4069 sdata_unlock(sdata);
4072 void ieee80211_sta_restart(struct ieee80211_sub_if_data *sdata)
4074 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
4077 if (!ifmgd->associated) {
4078 sdata_unlock(sdata);
4082 if (sdata->flags & IEEE80211_SDATA_DISCONNECT_RESUME) {
4083 sdata->flags &= ~IEEE80211_SDATA_DISCONNECT_RESUME;
4084 mlme_dbg(sdata, "driver requested disconnect after resume\n");
4085 ieee80211_sta_connection_lost(sdata,
4086 ifmgd->associated->bssid,
4087 WLAN_REASON_UNSPECIFIED,
4089 sdata_unlock(sdata);
4092 sdata_unlock(sdata);
4096 /* interface setup */
4097 void ieee80211_sta_setup_sdata(struct ieee80211_sub_if_data *sdata)
4099 struct ieee80211_if_managed *ifmgd;
4101 ifmgd = &sdata->u.mgd;
4102 INIT_WORK(&ifmgd->monitor_work, ieee80211_sta_monitor_work);
4103 INIT_WORK(&ifmgd->chswitch_work, ieee80211_chswitch_work);
4104 INIT_WORK(&ifmgd->beacon_connection_loss_work,
4105 ieee80211_beacon_connection_loss_work);
4106 INIT_WORK(&ifmgd->csa_connection_drop_work,
4107 ieee80211_csa_connection_drop_work);
4108 INIT_WORK(&ifmgd->request_smps_work, ieee80211_request_smps_mgd_work);
4109 INIT_DELAYED_WORK(&ifmgd->tdls_peer_del_work,
4110 ieee80211_tdls_peer_del_work);
4111 setup_timer(&ifmgd->timer, ieee80211_sta_timer,
4112 (unsigned long) sdata);
4113 setup_timer(&ifmgd->bcn_mon_timer, ieee80211_sta_bcn_mon_timer,
4114 (unsigned long) sdata);
4115 setup_timer(&ifmgd->conn_mon_timer, ieee80211_sta_conn_mon_timer,
4116 (unsigned long) sdata);
4117 setup_timer(&ifmgd->chswitch_timer, ieee80211_chswitch_timer,
4118 (unsigned long) sdata);
4119 INIT_DELAYED_WORK(&ifmgd->tx_tspec_wk,
4120 ieee80211_sta_handle_tspec_ac_params_wk);
4123 ifmgd->powersave = sdata->wdev.ps;
4124 ifmgd->uapsd_queues = sdata->local->hw.uapsd_queues;
4125 ifmgd->uapsd_max_sp_len = sdata->local->hw.uapsd_max_sp_len;
4126 ifmgd->p2p_noa_index = -1;
4128 if (sdata->local->hw.wiphy->features & NL80211_FEATURE_DYNAMIC_SMPS)
4129 ifmgd->req_smps = IEEE80211_SMPS_AUTOMATIC;
4131 ifmgd->req_smps = IEEE80211_SMPS_OFF;
4133 /* Setup TDLS data */
4134 spin_lock_init(&ifmgd->teardown_lock);
4135 ifmgd->teardown_skb = NULL;
4136 ifmgd->orig_teardown_skb = NULL;
4139 /* scan finished notification */
4140 void ieee80211_mlme_notify_scan_completed(struct ieee80211_local *local)
4142 struct ieee80211_sub_if_data *sdata;
4144 /* Restart STA timers */
4146 list_for_each_entry_rcu(sdata, &local->interfaces, list) {
4147 if (ieee80211_sdata_running(sdata))
4148 ieee80211_restart_sta_timer(sdata);
4153 static u8 ieee80211_ht_vht_rx_chains(struct ieee80211_sub_if_data *sdata,
4154 struct cfg80211_bss *cbss)
4156 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
4157 const u8 *ht_cap_ie, *vht_cap_ie;
4158 const struct ieee80211_ht_cap *ht_cap;
4159 const struct ieee80211_vht_cap *vht_cap;
4162 if (ifmgd->flags & IEEE80211_STA_DISABLE_HT)
4165 ht_cap_ie = ieee80211_bss_get_ie(cbss, WLAN_EID_HT_CAPABILITY);
4166 if (ht_cap_ie && ht_cap_ie[1] >= sizeof(*ht_cap)) {
4167 ht_cap = (void *)(ht_cap_ie + 2);
4168 chains = ieee80211_mcs_to_chains(&ht_cap->mcs);
4170 * TODO: use "Tx Maximum Number Spatial Streams Supported" and
4171 * "Tx Unequal Modulation Supported" fields.
4175 if (ifmgd->flags & IEEE80211_STA_DISABLE_VHT)
4178 vht_cap_ie = ieee80211_bss_get_ie(cbss, WLAN_EID_VHT_CAPABILITY);
4179 if (vht_cap_ie && vht_cap_ie[1] >= sizeof(*vht_cap)) {
4183 vht_cap = (void *)(vht_cap_ie + 2);
4184 tx_mcs_map = le16_to_cpu(vht_cap->supp_mcs.tx_mcs_map);
4185 for (nss = 8; nss > 0; nss--) {
4186 if (((tx_mcs_map >> (2 * (nss - 1))) & 3) !=
4187 IEEE80211_VHT_MCS_NOT_SUPPORTED)
4190 /* TODO: use "Tx Highest Supported Long GI Data Rate" field? */
4191 chains = max(chains, nss);
4197 static int ieee80211_prep_channel(struct ieee80211_sub_if_data *sdata,
4198 struct cfg80211_bss *cbss)
4200 struct ieee80211_local *local = sdata->local;
4201 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
4202 const struct ieee80211_ht_cap *ht_cap = NULL;
4203 const struct ieee80211_ht_operation *ht_oper = NULL;
4204 const struct ieee80211_vht_operation *vht_oper = NULL;
4205 struct ieee80211_supported_band *sband;
4206 struct cfg80211_chan_def chandef;
4211 sband = local->hw.wiphy->bands[cbss->channel->band];
4213 ifmgd->flags &= ~(IEEE80211_STA_DISABLE_40MHZ |
4214 IEEE80211_STA_DISABLE_80P80MHZ |
4215 IEEE80211_STA_DISABLE_160MHZ);
4219 if (!(ifmgd->flags & IEEE80211_STA_DISABLE_HT) &&
4220 sband->ht_cap.ht_supported) {
4221 const u8 *ht_oper_ie, *ht_cap_ie;
4223 ht_oper_ie = ieee80211_bss_get_ie(cbss, WLAN_EID_HT_OPERATION);
4224 if (ht_oper_ie && ht_oper_ie[1] >= sizeof(*ht_oper))
4225 ht_oper = (void *)(ht_oper_ie + 2);
4227 ht_cap_ie = ieee80211_bss_get_ie(cbss, WLAN_EID_HT_CAPABILITY);
4228 if (ht_cap_ie && ht_cap_ie[1] >= sizeof(*ht_cap))
4229 ht_cap = (void *)(ht_cap_ie + 2);
4232 ifmgd->flags |= IEEE80211_STA_DISABLE_HT;
4237 if (!(ifmgd->flags & IEEE80211_STA_DISABLE_VHT) &&
4238 sband->vht_cap.vht_supported) {
4239 const u8 *vht_oper_ie, *vht_cap;
4241 vht_oper_ie = ieee80211_bss_get_ie(cbss,
4242 WLAN_EID_VHT_OPERATION);
4243 if (vht_oper_ie && vht_oper_ie[1] >= sizeof(*vht_oper))
4244 vht_oper = (void *)(vht_oper_ie + 2);
4245 if (vht_oper && !ht_oper) {
4248 "AP advertised VHT without HT, disabling both\n");
4249 ifmgd->flags |= IEEE80211_STA_DISABLE_HT;
4250 ifmgd->flags |= IEEE80211_STA_DISABLE_VHT;
4253 vht_cap = ieee80211_bss_get_ie(cbss, WLAN_EID_VHT_CAPABILITY);
4254 if (!vht_cap || vht_cap[1] < sizeof(struct ieee80211_vht_cap)) {
4255 ifmgd->flags |= IEEE80211_STA_DISABLE_VHT;
4260 /* Allow VHT if at least one channel on the sband supports 80 MHz */
4262 for (i = 0; i < sband->n_channels; i++) {
4263 if (sband->channels[i].flags & (IEEE80211_CHAN_DISABLED |
4264 IEEE80211_CHAN_NO_80MHZ))
4272 ifmgd->flags |= IEEE80211_STA_DISABLE_VHT;
4274 ifmgd->flags |= ieee80211_determine_chantype(sdata, sband,
4276 ht_cap, ht_oper, vht_oper,
4279 sdata->needed_rx_chains = min(ieee80211_ht_vht_rx_chains(sdata, cbss),
4284 /* will change later if needed */
4285 sdata->smps_mode = IEEE80211_SMPS_OFF;
4287 mutex_lock(&local->mtx);
4289 * If this fails (possibly due to channel context sharing
4290 * on incompatible channels, e.g. 80+80 and 160 sharing the
4291 * same control channel) try to use a smaller bandwidth.
4293 ret = ieee80211_vif_use_channel(sdata, &chandef,
4294 IEEE80211_CHANCTX_SHARED);
4296 /* don't downgrade for 5 and 10 MHz channels, though. */
4297 if (chandef.width == NL80211_CHAN_WIDTH_5 ||
4298 chandef.width == NL80211_CHAN_WIDTH_10)
4301 while (ret && chandef.width != NL80211_CHAN_WIDTH_20_NOHT) {
4302 ifmgd->flags |= ieee80211_chandef_downgrade(&chandef);
4303 ret = ieee80211_vif_use_channel(sdata, &chandef,
4304 IEEE80211_CHANCTX_SHARED);
4307 mutex_unlock(&local->mtx);
4311 static int ieee80211_prep_connection(struct ieee80211_sub_if_data *sdata,
4312 struct cfg80211_bss *cbss, bool assoc,
4315 struct ieee80211_local *local = sdata->local;
4316 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
4317 struct ieee80211_bss *bss = (void *)cbss->priv;
4318 struct sta_info *new_sta = NULL;
4319 struct ieee80211_supported_band *sband;
4320 bool have_sta = false;
4323 sband = local->hw.wiphy->bands[cbss->channel->band];
4325 if (WARN_ON(!ifmgd->auth_data && !ifmgd->assoc_data))
4330 have_sta = sta_info_get(sdata, cbss->bssid);
4335 new_sta = sta_info_alloc(sdata, cbss->bssid, GFP_KERNEL);
4340 if (new_sta || override) {
4341 err = ieee80211_prep_channel(sdata, cbss);
4344 sta_info_free(local, new_sta);
4350 u32 rates = 0, basic_rates = 0;
4351 bool have_higher_than_11mbit;
4352 int min_rate = INT_MAX, min_rate_index = -1;
4353 struct ieee80211_chanctx_conf *chanctx_conf;
4354 const struct cfg80211_bss_ies *ies;
4355 int shift = ieee80211_vif_get_shift(&sdata->vif);
4359 chanctx_conf = rcu_dereference(sdata->vif.chanctx_conf);
4360 if (WARN_ON(!chanctx_conf)) {
4362 sta_info_free(local, new_sta);
4365 rate_flags = ieee80211_chandef_rate_flags(&chanctx_conf->def);
4368 ieee80211_get_rates(sband, bss->supp_rates,
4369 bss->supp_rates_len,
4370 &rates, &basic_rates,
4371 &have_higher_than_11mbit,
4372 &min_rate, &min_rate_index,
4376 * This used to be a workaround for basic rates missing
4377 * in the association response frame. Now that we no
4378 * longer use the basic rates from there, it probably
4379 * doesn't happen any more, but keep the workaround so
4380 * in case some *other* APs are buggy in different ways
4381 * we can connect -- with a warning.
4383 if (!basic_rates && min_rate_index >= 0) {
4385 "No basic rates, using min rate instead\n");
4386 basic_rates = BIT(min_rate_index);
4389 new_sta->sta.supp_rates[cbss->channel->band] = rates;
4390 sdata->vif.bss_conf.basic_rates = basic_rates;
4392 /* cf. IEEE 802.11 9.2.12 */
4393 if (cbss->channel->band == IEEE80211_BAND_2GHZ &&
4394 have_higher_than_11mbit)
4395 sdata->flags |= IEEE80211_SDATA_OPERATING_GMODE;
4397 sdata->flags &= ~IEEE80211_SDATA_OPERATING_GMODE;
4399 memcpy(ifmgd->bssid, cbss->bssid, ETH_ALEN);
4401 /* set timing information */
4402 sdata->vif.bss_conf.beacon_int = cbss->beacon_interval;
4404 ies = rcu_dereference(cbss->beacon_ies);
4408 sdata->vif.bss_conf.sync_tsf = ies->tsf;
4409 sdata->vif.bss_conf.sync_device_ts =
4410 bss->device_ts_beacon;
4411 tim_ie = cfg80211_find_ie(WLAN_EID_TIM,
4412 ies->data, ies->len);
4413 if (tim_ie && tim_ie[1] >= 2)
4414 sdata->vif.bss_conf.sync_dtim_count = tim_ie[2];
4416 sdata->vif.bss_conf.sync_dtim_count = 0;
4417 } else if (!ieee80211_hw_check(&sdata->local->hw,
4418 TIMING_BEACON_ONLY)) {
4419 ies = rcu_dereference(cbss->proberesp_ies);
4420 /* must be non-NULL since beacon IEs were NULL */
4421 sdata->vif.bss_conf.sync_tsf = ies->tsf;
4422 sdata->vif.bss_conf.sync_device_ts =
4423 bss->device_ts_presp;
4424 sdata->vif.bss_conf.sync_dtim_count = 0;
4426 sdata->vif.bss_conf.sync_tsf = 0;
4427 sdata->vif.bss_conf.sync_device_ts = 0;
4428 sdata->vif.bss_conf.sync_dtim_count = 0;
4432 /* tell driver about BSSID, basic rates and timing */
4433 ieee80211_bss_info_change_notify(sdata,
4434 BSS_CHANGED_BSSID | BSS_CHANGED_BASIC_RATES |
4435 BSS_CHANGED_BEACON_INT);
4438 sta_info_pre_move_state(new_sta, IEEE80211_STA_AUTH);
4440 err = sta_info_insert(new_sta);
4444 "failed to insert STA entry for the AP (error %d)\n",
4449 WARN_ON_ONCE(!ether_addr_equal(ifmgd->bssid, cbss->bssid));
4451 /* Cancel scan to ensure that nothing interferes with connection */
4452 if (local->scanning)
4453 ieee80211_scan_cancel(local);
4459 int ieee80211_mgd_auth(struct ieee80211_sub_if_data *sdata,
4460 struct cfg80211_auth_request *req)
4462 struct ieee80211_local *local = sdata->local;
4463 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
4464 struct ieee80211_mgd_auth_data *auth_data;
4468 /* prepare auth data structure */
4470 switch (req->auth_type) {
4471 case NL80211_AUTHTYPE_OPEN_SYSTEM:
4472 auth_alg = WLAN_AUTH_OPEN;
4474 case NL80211_AUTHTYPE_SHARED_KEY:
4475 if (IS_ERR(local->wep_tx_tfm))
4477 auth_alg = WLAN_AUTH_SHARED_KEY;
4479 case NL80211_AUTHTYPE_FT:
4480 auth_alg = WLAN_AUTH_FT;
4482 case NL80211_AUTHTYPE_NETWORK_EAP:
4483 auth_alg = WLAN_AUTH_LEAP;
4485 case NL80211_AUTHTYPE_SAE:
4486 auth_alg = WLAN_AUTH_SAE;
4492 auth_data = kzalloc(sizeof(*auth_data) + req->sae_data_len +
4493 req->ie_len, GFP_KERNEL);
4497 auth_data->bss = req->bss;
4499 if (req->sae_data_len >= 4) {
4500 __le16 *pos = (__le16 *) req->sae_data;
4501 auth_data->sae_trans = le16_to_cpu(pos[0]);
4502 auth_data->sae_status = le16_to_cpu(pos[1]);
4503 memcpy(auth_data->data, req->sae_data + 4,
4504 req->sae_data_len - 4);
4505 auth_data->data_len += req->sae_data_len - 4;
4508 if (req->ie && req->ie_len) {
4509 memcpy(&auth_data->data[auth_data->data_len],
4510 req->ie, req->ie_len);
4511 auth_data->data_len += req->ie_len;
4514 if (req->key && req->key_len) {
4515 auth_data->key_len = req->key_len;
4516 auth_data->key_idx = req->key_idx;
4517 memcpy(auth_data->key, req->key, req->key_len);
4520 auth_data->algorithm = auth_alg;
4522 /* try to authenticate/probe */
4524 if ((ifmgd->auth_data && !ifmgd->auth_data->done) ||
4525 ifmgd->assoc_data) {
4530 if (ifmgd->auth_data)
4531 ieee80211_destroy_auth_data(sdata, false);
4533 /* prep auth_data so we don't go into idle on disassoc */
4534 ifmgd->auth_data = auth_data;
4536 if (ifmgd->associated) {
4537 u8 frame_buf[IEEE80211_DEAUTH_FRAME_LEN];
4539 ieee80211_set_disassoc(sdata, IEEE80211_STYPE_DEAUTH,
4540 WLAN_REASON_UNSPECIFIED,
4543 ieee80211_report_disconnect(sdata, frame_buf,
4544 sizeof(frame_buf), true,
4545 WLAN_REASON_UNSPECIFIED);
4548 sdata_info(sdata, "authenticate with %pM\n", req->bss->bssid);
4550 err = ieee80211_prep_connection(sdata, req->bss, false, false);
4554 err = ieee80211_auth(sdata);
4556 sta_info_destroy_addr(sdata, req->bss->bssid);
4560 /* hold our own reference */
4561 cfg80211_ref_bss(local->hw.wiphy, auth_data->bss);
4565 eth_zero_addr(ifmgd->bssid);
4566 ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_BSSID);
4567 ifmgd->auth_data = NULL;
4568 mutex_lock(&sdata->local->mtx);
4569 ieee80211_vif_release_channel(sdata);
4570 mutex_unlock(&sdata->local->mtx);
4576 int ieee80211_mgd_assoc(struct ieee80211_sub_if_data *sdata,
4577 struct cfg80211_assoc_request *req)
4579 struct ieee80211_local *local = sdata->local;
4580 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
4581 struct ieee80211_bss *bss = (void *)req->bss->priv;
4582 struct ieee80211_mgd_assoc_data *assoc_data;
4583 const struct cfg80211_bss_ies *beacon_ies;
4584 struct ieee80211_supported_band *sband;
4585 const u8 *ssidie, *ht_ie, *vht_ie;
4587 bool override = false;
4589 assoc_data = kzalloc(sizeof(*assoc_data) + req->ie_len, GFP_KERNEL);
4594 ssidie = ieee80211_bss_get_ie(req->bss, WLAN_EID_SSID);
4600 memcpy(assoc_data->ssid, ssidie + 2, ssidie[1]);
4601 assoc_data->ssid_len = ssidie[1];
4604 if (ifmgd->associated) {
4605 u8 frame_buf[IEEE80211_DEAUTH_FRAME_LEN];
4607 ieee80211_set_disassoc(sdata, IEEE80211_STYPE_DEAUTH,
4608 WLAN_REASON_UNSPECIFIED,
4611 ieee80211_report_disconnect(sdata, frame_buf,
4612 sizeof(frame_buf), true,
4613 WLAN_REASON_UNSPECIFIED);
4616 if (ifmgd->auth_data && !ifmgd->auth_data->done) {
4621 if (ifmgd->assoc_data) {
4626 if (ifmgd->auth_data) {
4629 /* keep sta info, bssid if matching */
4630 match = ether_addr_equal(ifmgd->bssid, req->bss->bssid);
4631 ieee80211_destroy_auth_data(sdata, match);
4634 /* prepare assoc data */
4636 ifmgd->beacon_crc_valid = false;
4638 assoc_data->wmm = bss->wmm_used &&
4639 (local->hw.queues >= IEEE80211_NUM_ACS);
4642 * IEEE802.11n does not allow TKIP/WEP as pairwise ciphers in HT mode.
4643 * We still associate in non-HT mode (11a/b/g) if any one of these
4644 * ciphers is configured as pairwise.
4645 * We can set this to true for non-11n hardware, that'll be checked
4646 * separately along with the peer capabilities.
4648 for (i = 0; i < req->crypto.n_ciphers_pairwise; i++) {
4649 if (req->crypto.ciphers_pairwise[i] == WLAN_CIPHER_SUITE_WEP40 ||
4650 req->crypto.ciphers_pairwise[i] == WLAN_CIPHER_SUITE_TKIP ||
4651 req->crypto.ciphers_pairwise[i] == WLAN_CIPHER_SUITE_WEP104) {
4652 ifmgd->flags |= IEEE80211_STA_DISABLE_HT;
4653 ifmgd->flags |= IEEE80211_STA_DISABLE_VHT;
4654 netdev_info(sdata->dev,
4655 "disabling HT/VHT due to WEP/TKIP use\n");
4659 /* Also disable HT if we don't support it or the AP doesn't use WMM */
4660 sband = local->hw.wiphy->bands[req->bss->channel->band];
4661 if (!sband->ht_cap.ht_supported ||
4662 local->hw.queues < IEEE80211_NUM_ACS || !bss->wmm_used ||
4663 ifmgd->flags & IEEE80211_STA_DISABLE_WMM) {
4664 ifmgd->flags |= IEEE80211_STA_DISABLE_HT;
4665 if (!bss->wmm_used &&
4666 !(ifmgd->flags & IEEE80211_STA_DISABLE_WMM))
4667 netdev_info(sdata->dev,
4668 "disabling HT as WMM/QoS is not supported by the AP\n");
4671 /* disable VHT if we don't support it or the AP doesn't use WMM */
4672 if (!sband->vht_cap.vht_supported ||
4673 local->hw.queues < IEEE80211_NUM_ACS || !bss->wmm_used ||
4674 ifmgd->flags & IEEE80211_STA_DISABLE_WMM) {
4675 ifmgd->flags |= IEEE80211_STA_DISABLE_VHT;
4676 if (!bss->wmm_used &&
4677 !(ifmgd->flags & IEEE80211_STA_DISABLE_WMM))
4678 netdev_info(sdata->dev,
4679 "disabling VHT as WMM/QoS is not supported by the AP\n");
4682 memcpy(&ifmgd->ht_capa, &req->ht_capa, sizeof(ifmgd->ht_capa));
4683 memcpy(&ifmgd->ht_capa_mask, &req->ht_capa_mask,
4684 sizeof(ifmgd->ht_capa_mask));
4686 memcpy(&ifmgd->vht_capa, &req->vht_capa, sizeof(ifmgd->vht_capa));
4687 memcpy(&ifmgd->vht_capa_mask, &req->vht_capa_mask,
4688 sizeof(ifmgd->vht_capa_mask));
4690 if (req->ie && req->ie_len) {
4691 memcpy(assoc_data->ie, req->ie, req->ie_len);
4692 assoc_data->ie_len = req->ie_len;
4695 assoc_data->bss = req->bss;
4697 if (ifmgd->req_smps == IEEE80211_SMPS_AUTOMATIC) {
4698 if (ifmgd->powersave)
4699 sdata->smps_mode = IEEE80211_SMPS_DYNAMIC;
4701 sdata->smps_mode = IEEE80211_SMPS_OFF;
4703 sdata->smps_mode = ifmgd->req_smps;
4705 assoc_data->capability = req->bss->capability;
4706 assoc_data->supp_rates = bss->supp_rates;
4707 assoc_data->supp_rates_len = bss->supp_rates_len;
4710 ht_ie = ieee80211_bss_get_ie(req->bss, WLAN_EID_HT_OPERATION);
4711 if (ht_ie && ht_ie[1] >= sizeof(struct ieee80211_ht_operation))
4712 assoc_data->ap_ht_param =
4713 ((struct ieee80211_ht_operation *)(ht_ie + 2))->ht_param;
4715 ifmgd->flags |= IEEE80211_STA_DISABLE_HT;
4716 vht_ie = ieee80211_bss_get_ie(req->bss, WLAN_EID_VHT_CAPABILITY);
4717 if (vht_ie && vht_ie[1] >= sizeof(struct ieee80211_vht_cap))
4718 memcpy(&assoc_data->ap_vht_cap, vht_ie + 2,
4719 sizeof(struct ieee80211_vht_cap));
4721 ifmgd->flags |= IEEE80211_STA_DISABLE_VHT;
4724 if (WARN((sdata->vif.driver_flags & IEEE80211_VIF_SUPPORTS_UAPSD) &&
4725 ieee80211_hw_check(&local->hw, PS_NULLFUNC_STACK),
4726 "U-APSD not supported with HW_PS_NULLFUNC_STACK\n"))
4727 sdata->vif.driver_flags &= ~IEEE80211_VIF_SUPPORTS_UAPSD;
4729 if (bss->wmm_used && bss->uapsd_supported &&
4730 (sdata->vif.driver_flags & IEEE80211_VIF_SUPPORTS_UAPSD)) {
4731 assoc_data->uapsd = true;
4732 ifmgd->flags |= IEEE80211_STA_UAPSD_ENABLED;
4734 assoc_data->uapsd = false;
4735 ifmgd->flags &= ~IEEE80211_STA_UAPSD_ENABLED;
4738 if (req->prev_bssid)
4739 memcpy(assoc_data->prev_bssid, req->prev_bssid, ETH_ALEN);
4742 ifmgd->mfp = IEEE80211_MFP_REQUIRED;
4743 ifmgd->flags |= IEEE80211_STA_MFP_ENABLED;
4745 ifmgd->mfp = IEEE80211_MFP_DISABLED;
4746 ifmgd->flags &= ~IEEE80211_STA_MFP_ENABLED;
4749 if (req->flags & ASSOC_REQ_USE_RRM)
4750 ifmgd->flags |= IEEE80211_STA_ENABLE_RRM;
4752 ifmgd->flags &= ~IEEE80211_STA_ENABLE_RRM;
4754 if (req->crypto.control_port)
4755 ifmgd->flags |= IEEE80211_STA_CONTROL_PORT;
4757 ifmgd->flags &= ~IEEE80211_STA_CONTROL_PORT;
4759 sdata->control_port_protocol = req->crypto.control_port_ethertype;
4760 sdata->control_port_no_encrypt = req->crypto.control_port_no_encrypt;
4761 sdata->encrypt_headroom = ieee80211_cs_headroom(local, &req->crypto,
4764 /* kick off associate process */
4766 ifmgd->assoc_data = assoc_data;
4767 ifmgd->dtim_period = 0;
4768 ifmgd->have_beacon = false;
4770 /* override HT/VHT configuration only if the AP and we support it */
4771 if (!(ifmgd->flags & IEEE80211_STA_DISABLE_HT)) {
4772 struct ieee80211_sta_ht_cap sta_ht_cap;
4774 if (req->flags & ASSOC_REQ_DISABLE_HT)
4777 memcpy(&sta_ht_cap, &sband->ht_cap, sizeof(sta_ht_cap));
4778 ieee80211_apply_htcap_overrides(sdata, &sta_ht_cap);
4780 /* check for 40 MHz disable override */
4781 if (!(ifmgd->flags & IEEE80211_STA_DISABLE_40MHZ) &&
4782 sband->ht_cap.cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40 &&
4783 !(sta_ht_cap.cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40))
4786 if (!(ifmgd->flags & IEEE80211_STA_DISABLE_VHT) &&
4787 req->flags & ASSOC_REQ_DISABLE_VHT)
4791 if (req->flags & ASSOC_REQ_DISABLE_HT) {
4792 ifmgd->flags |= IEEE80211_STA_DISABLE_HT;
4793 ifmgd->flags |= IEEE80211_STA_DISABLE_VHT;
4796 if (req->flags & ASSOC_REQ_DISABLE_VHT)
4797 ifmgd->flags |= IEEE80211_STA_DISABLE_VHT;
4799 err = ieee80211_prep_connection(sdata, req->bss, true, override);
4804 beacon_ies = rcu_dereference(req->bss->beacon_ies);
4806 if (ieee80211_hw_check(&sdata->local->hw, NEED_DTIM_BEFORE_ASSOC) &&
4809 * Wait up to one beacon interval ...
4810 * should this be more if we miss one?
4812 sdata_info(sdata, "waiting for beacon from %pM\n",
4814 assoc_data->timeout = TU_TO_EXP_TIME(req->bss->beacon_interval);
4815 assoc_data->timeout_started = true;
4816 assoc_data->need_beacon = true;
4817 } else if (beacon_ies) {
4818 const u8 *tim_ie = cfg80211_find_ie(WLAN_EID_TIM,
4823 if (tim_ie && tim_ie[1] >= sizeof(struct ieee80211_tim_ie)) {
4824 const struct ieee80211_tim_ie *tim;
4825 tim = (void *)(tim_ie + 2);
4826 ifmgd->dtim_period = tim->dtim_period;
4827 dtim_count = tim->dtim_count;
4829 ifmgd->have_beacon = true;
4830 assoc_data->timeout = jiffies;
4831 assoc_data->timeout_started = true;
4833 if (ieee80211_hw_check(&local->hw, TIMING_BEACON_ONLY)) {
4834 sdata->vif.bss_conf.sync_tsf = beacon_ies->tsf;
4835 sdata->vif.bss_conf.sync_device_ts =
4836 bss->device_ts_beacon;
4837 sdata->vif.bss_conf.sync_dtim_count = dtim_count;
4840 assoc_data->timeout = jiffies;
4841 assoc_data->timeout_started = true;
4845 run_again(sdata, assoc_data->timeout);
4847 if (bss->corrupt_data) {
4848 char *corrupt_type = "data";
4849 if (bss->corrupt_data & IEEE80211_BSS_CORRUPT_BEACON) {
4850 if (bss->corrupt_data &
4851 IEEE80211_BSS_CORRUPT_PROBE_RESP)
4852 corrupt_type = "beacon and probe response";
4854 corrupt_type = "beacon";
4855 } else if (bss->corrupt_data & IEEE80211_BSS_CORRUPT_PROBE_RESP)
4856 corrupt_type = "probe response";
4857 sdata_info(sdata, "associating with AP with corrupt %s\n",
4863 eth_zero_addr(ifmgd->bssid);
4864 ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_BSSID);
4865 ifmgd->assoc_data = NULL;
4871 int ieee80211_mgd_deauth(struct ieee80211_sub_if_data *sdata,
4872 struct cfg80211_deauth_request *req)
4874 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
4875 u8 frame_buf[IEEE80211_DEAUTH_FRAME_LEN];
4876 bool tx = !req->local_state_change;
4878 if (ifmgd->auth_data &&
4879 ether_addr_equal(ifmgd->auth_data->bss->bssid, req->bssid)) {
4881 "aborting authentication with %pM by local choice (Reason: %u=%s)\n",
4882 req->bssid, req->reason_code,
4883 ieee80211_get_reason_code_string(req->reason_code));
4885 drv_mgd_prepare_tx(sdata->local, sdata);
4886 ieee80211_send_deauth_disassoc(sdata, req->bssid,
4887 IEEE80211_STYPE_DEAUTH,
4888 req->reason_code, tx,
4890 ieee80211_destroy_auth_data(sdata, false);
4891 ieee80211_report_disconnect(sdata, frame_buf,
4892 sizeof(frame_buf), true,
4898 if (ifmgd->assoc_data &&
4899 ether_addr_equal(ifmgd->assoc_data->bss->bssid, req->bssid)) {
4901 "aborting association with %pM by local choice (Reason: %u=%s)\n",
4902 req->bssid, req->reason_code,
4903 ieee80211_get_reason_code_string(req->reason_code));
4905 drv_mgd_prepare_tx(sdata->local, sdata);
4906 ieee80211_send_deauth_disassoc(sdata, req->bssid,
4907 IEEE80211_STYPE_DEAUTH,
4908 req->reason_code, tx,
4910 ieee80211_destroy_assoc_data(sdata, false);
4911 ieee80211_report_disconnect(sdata, frame_buf,
4912 sizeof(frame_buf), true,
4917 if (ifmgd->associated &&
4918 ether_addr_equal(ifmgd->associated->bssid, req->bssid)) {
4920 "deauthenticating from %pM by local choice (Reason: %u=%s)\n",
4921 req->bssid, req->reason_code,
4922 ieee80211_get_reason_code_string(req->reason_code));
4924 ieee80211_set_disassoc(sdata, IEEE80211_STYPE_DEAUTH,
4925 req->reason_code, tx, frame_buf);
4926 ieee80211_report_disconnect(sdata, frame_buf,
4927 sizeof(frame_buf), true,
4935 int ieee80211_mgd_disassoc(struct ieee80211_sub_if_data *sdata,
4936 struct cfg80211_disassoc_request *req)
4938 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
4940 u8 frame_buf[IEEE80211_DEAUTH_FRAME_LEN];
4943 * cfg80211 should catch this ... but it's racy since
4944 * we can receive a disassoc frame, process it, hand it
4945 * to cfg80211 while that's in a locked section already
4946 * trying to tell us that the user wants to disconnect.
4948 if (ifmgd->associated != req->bss)
4952 "disassociating from %pM by local choice (Reason: %u=%s)\n",
4953 req->bss->bssid, req->reason_code, ieee80211_get_reason_code_string(req->reason_code));
4955 memcpy(bssid, req->bss->bssid, ETH_ALEN);
4956 ieee80211_set_disassoc(sdata, IEEE80211_STYPE_DISASSOC,
4957 req->reason_code, !req->local_state_change,
4960 ieee80211_report_disconnect(sdata, frame_buf, sizeof(frame_buf), true,
4966 void ieee80211_mgd_stop(struct ieee80211_sub_if_data *sdata)
4968 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
4971 * Make sure some work items will not run after this,
4972 * they will not do anything but might not have been
4973 * cancelled when disconnecting.
4975 cancel_work_sync(&ifmgd->monitor_work);
4976 cancel_work_sync(&ifmgd->beacon_connection_loss_work);
4977 cancel_work_sync(&ifmgd->request_smps_work);
4978 cancel_work_sync(&ifmgd->csa_connection_drop_work);
4979 cancel_work_sync(&ifmgd->chswitch_work);
4980 cancel_delayed_work_sync(&ifmgd->tdls_peer_del_work);
4983 if (ifmgd->assoc_data) {
4984 struct cfg80211_bss *bss = ifmgd->assoc_data->bss;
4985 ieee80211_destroy_assoc_data(sdata, false);
4986 cfg80211_assoc_timeout(sdata->dev, bss);
4988 if (ifmgd->auth_data)
4989 ieee80211_destroy_auth_data(sdata, false);
4990 spin_lock_bh(&ifmgd->teardown_lock);
4991 if (ifmgd->teardown_skb) {
4992 kfree_skb(ifmgd->teardown_skb);
4993 ifmgd->teardown_skb = NULL;
4994 ifmgd->orig_teardown_skb = NULL;
4996 spin_unlock_bh(&ifmgd->teardown_lock);
4997 del_timer_sync(&ifmgd->timer);
4998 sdata_unlock(sdata);
5001 void ieee80211_cqm_rssi_notify(struct ieee80211_vif *vif,
5002 enum nl80211_cqm_rssi_threshold_event rssi_event,
5005 struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif);
5007 trace_api_cqm_rssi_notify(sdata, rssi_event);
5009 cfg80211_cqm_rssi_notify(sdata->dev, rssi_event, gfp);
5011 EXPORT_SYMBOL(ieee80211_cqm_rssi_notify);
5013 void ieee80211_cqm_beacon_loss_notify(struct ieee80211_vif *vif, gfp_t gfp)
5015 struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif);
5017 trace_api_cqm_beacon_loss_notify(sdata->local, sdata);
5019 cfg80211_cqm_beacon_loss_notify(sdata->dev, gfp);
5021 EXPORT_SYMBOL(ieee80211_cqm_beacon_loss_notify);