drivers/usb/serial/usb_wwan.c

   1 // SPDX-License-Identifier: GPL-2.0
   2 /*
   3   USB Driver layer for GSM modems
   4
   5   Copyright (C) 2005  Matthias Urlichs <[email protected]>
   6
   7   Portions copied from the Keyspan driver by Hugh Blemings <[email protected]>
   8
   9   History: see the git log.
  10
  11   Work sponsored by: Sigos GmbH, Germany <[email protected]>
  12
  13   This driver exists because the "normal" serial driver doesn't work too well
  14   with GSM modems. Issues:
  15   - data loss -- one single Receive URB is not nearly enough
  16   - controlling the baud rate doesn't make sense
  17 */
  18
  19 #define DRIVER_AUTHOR "Matthias Urlichs <[email protected]>"
  20 #define DRIVER_DESC "USB Driver for GSM modems"
  21
  22 #include <linux/kernel.h>
  23 #include <linux/jiffies.h>
  24 #include <linux/errno.h>
  25 #include <linux/slab.h>
  26 #include <linux/tty.h>
  27 #include <linux/tty_flip.h>
  28 #include <linux/module.h>
  29 #include <linux/bitops.h>
  30 #include <linux/uaccess.h>
  31 #include <linux/usb.h>
  32 #include <linux/usb/serial.h>
  33 #include <linux/serial.h>
  34 #include "usb-wwan.h"
  35
  36 /*
  37  * Generate DTR/RTS signals on the port using the SET_CONTROL_LINE_STATE request
  38  * in CDC ACM.
  39  */
  40 static int usb_wwan_send_setup(struct usb_serial_port *port)
  41 {
  42         struct usb_serial *serial = port->serial;
  43         struct usb_wwan_port_private *portdata;
  44         int val = 0;
  45         int ifnum;
  46         int res;
  47
  48         portdata = usb_get_serial_port_data(port);
  49
  50         if (portdata->dtr_state)
  51                 val |= 0x01;
  52         if (portdata->rts_state)
  53                 val |= 0x02;
  54
  55         ifnum = serial->interface->cur_altsetting->desc.bInterfaceNumber;
  56
  57         res = usb_autopm_get_interface(serial->interface);
  58         if (res)
  59                 return res;
  60
  61         res = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
  62                                 0x22, 0x21, val, ifnum, NULL, 0,
  63                                 USB_CTRL_SET_TIMEOUT);
  64
  65         usb_autopm_put_interface(port->serial->interface);
  66
  67         return res;
  68 }
  69
  70 void usb_wwan_dtr_rts(struct usb_serial_port *port, int on)
  71 {
  72         struct usb_wwan_port_private *portdata;
  73         struct usb_wwan_intf_private *intfdata;
  74
  75         intfdata = usb_get_serial_data(port->serial);
  76
  77         if (!intfdata->use_send_setup)
  78                 return;
  79
  80         portdata = usb_get_serial_port_data(port);
  81         /* FIXME: locking */
  82         portdata->rts_state = on;
  83         portdata->dtr_state = on;
  84
  85         usb_wwan_send_setup(port);
  86 }
  87 EXPORT_SYMBOL(usb_wwan_dtr_rts);
  88
  89 int usb_wwan_tiocmget(struct tty_struct *tty)
  90 {
  91         struct usb_serial_port *port = tty->driver_data;
  92         unsigned int value;
  93         struct usb_wwan_port_private *portdata;
  94
  95         portdata = usb_get_serial_port_data(port);
  96
  97         value = ((portdata->rts_state) ? TIOCM_RTS : 0) |
  98             ((portdata->dtr_state) ? TIOCM_DTR : 0) |
  99             ((portdata->cts_state) ? TIOCM_CTS : 0) |
 100             ((portdata->dsr_state) ? TIOCM_DSR : 0) |
 101             ((portdata->dcd_state) ? TIOCM_CAR : 0) |
 102             ((portdata->ri_state) ? TIOCM_RNG : 0);
 103
 104         return value;
 105 }
 106 EXPORT_SYMBOL(usb_wwan_tiocmget);
 107
 108 int usb_wwan_tiocmset(struct tty_struct *tty,
 109                       unsigned int set, unsigned int clear)
 110 {
 111         struct usb_serial_port *port = tty->driver_data;
 112         struct usb_wwan_port_private *portdata;
 113         struct usb_wwan_intf_private *intfdata;
 114
 115         portdata = usb_get_serial_port_data(port);
 116         intfdata = usb_get_serial_data(port->serial);
 117
 118         if (!intfdata->use_send_setup)
 119                 return -EINVAL;
 120
 121         /* FIXME: what locks portdata fields ? */
 122         if (set & TIOCM_RTS)
 123                 portdata->rts_state = 1;
 124         if (set & TIOCM_DTR)
 125                 portdata->dtr_state = 1;
 126
 127         if (clear & TIOCM_RTS)
 128                 portdata->rts_state = 0;
 129         if (clear & TIOCM_DTR)
 130                 portdata->dtr_state = 0;
 131         return usb_wwan_send_setup(port);
 132 }
 133 EXPORT_SYMBOL(usb_wwan_tiocmset);
 134
 135 static int get_serial_info(struct usb_serial_port *port,
 136                            struct serial_struct __user *retinfo)
 137 {
 138         struct serial_struct tmp;
 139
 140         memset(&tmp, 0, sizeof(tmp));
 141         tmp.line            = port->minor;
 142         tmp.port            = port->port_number;
 143         tmp.baud_base       = tty_get_baud_rate(port->port.tty);
 144         tmp.close_delay     = port->port.close_delay / 10;
 145         tmp.closing_wait    = port->port.closing_wait == ASYNC_CLOSING_WAIT_NONE ?
 146                                  ASYNC_CLOSING_WAIT_NONE :
 147                                  port->port.closing_wait / 10;
 148
 149         if (copy_to_user(retinfo, &tmp, sizeof(*retinfo)))
 150                 return -EFAULT;
 151         return 0;
 152 }
 153
 154 static int set_serial_info(struct usb_serial_port *port,
 155                            struct serial_struct __user *newinfo)
 156 {
 157         struct serial_struct new_serial;
 158         unsigned int closing_wait, close_delay;
 159         int retval = 0;
 160
 161         if (copy_from_user(&new_serial, newinfo, sizeof(new_serial)))
 162                 return -EFAULT;
 163
 164         close_delay = new_serial.close_delay * 10;
 165         closing_wait = new_serial.closing_wait == ASYNC_CLOSING_WAIT_NONE ?
 166                         ASYNC_CLOSING_WAIT_NONE : new_serial.closing_wait * 10;
 167
 168         mutex_lock(&port->port.mutex);
 169
 170         if (!capable(CAP_SYS_ADMIN)) {
 171                 if ((close_delay != port->port.close_delay) ||
 172                     (closing_wait != port->port.closing_wait))
 173                         retval = -EPERM;
 174                 else
 175                         retval = -EOPNOTSUPP;
 176         } else {
 177                 port->port.close_delay  = close_delay;
 178                 port->port.closing_wait = closing_wait;
 179         }
 180
 181         mutex_unlock(&port->port.mutex);
 182         return retval;
 183 }
 184
 185 int usb_wwan_ioctl(struct tty_struct *tty,
 186                    unsigned int cmd, unsigned long arg)
 187 {
 188         struct usb_serial_port *port = tty->driver_data;
 189
 190         dev_dbg(&port->dev, "%s cmd 0x%04x\n", __func__, cmd);
 191
 192         switch (cmd) {
 193         case TIOCGSERIAL:
 194                 return get_serial_info(port,
 195                                        (struct serial_struct __user *) arg);
 196         case TIOCSSERIAL:
 197                 return set_serial_info(port,
 198                                        (struct serial_struct __user *) arg);
 199         default:
 200                 break;
 201         }
 202
 203         dev_dbg(&port->dev, "%s arg not supported\n", __func__);
 204
 205         return -ENOIOCTLCMD;
 206 }
 207 EXPORT_SYMBOL(usb_wwan_ioctl);
 208
 209 int usb_wwan_write(struct tty_struct *tty, struct usb_serial_port *port,
 210                    const unsigned char *buf, int count)
 211 {
 212         struct usb_wwan_port_private *portdata;
 213         struct usb_wwan_intf_private *intfdata;
 214         int i;
 215         int left, todo;
 216         struct urb *this_urb = NULL;    /* spurious */
 217         int err;
 218         unsigned long flags;
 219
 220         portdata = usb_get_serial_port_data(port);
 221         intfdata = usb_get_serial_data(port->serial);
 222
 223         dev_dbg(&port->dev, "%s: write (%d chars)\n", __func__, count);
 224
 225         i = 0;
 226         left = count;
 227         for (i = 0; left > 0 && i < N_OUT_URB; i++) {
 228                 todo = left;
 229                 if (todo > OUT_BUFLEN)
 230                         todo = OUT_BUFLEN;
 231
 232                 this_urb = portdata->out_urbs[i];
 233                 if (test_and_set_bit(i, &portdata->out_busy)) {
 234                         if (time_before(jiffies,
 235                                         portdata->tx_start_time[i] + 10 * HZ))
 236                                 continue;
 237                         usb_unlink_urb(this_urb);
 238                         continue;
 239                 }
 240                 dev_dbg(&port->dev, "%s: endpoint %d buf %d\n", __func__,
 241                         usb_pipeendpoint(this_urb->pipe), i);
 242
 243                 err = usb_autopm_get_interface_async(port->serial->interface);
 244                 if (err < 0) {
 245                         clear_bit(i, &portdata->out_busy);
 246                         break;
 247                 }
 248
 249                 /* send the data */
 250                 memcpy(this_urb->transfer_buffer, buf, todo);
 251                 this_urb->transfer_buffer_length = todo;
 252
 253                 spin_lock_irqsave(&intfdata->susp_lock, flags);
 254                 if (intfdata->suspended) {
 255                         usb_anchor_urb(this_urb, &portdata->delayed);
 256                         spin_unlock_irqrestore(&intfdata->susp_lock, flags);
 257                 } else {
 258                         intfdata->in_flight++;
 259                         spin_unlock_irqrestore(&intfdata->susp_lock, flags);
 260                         err = usb_submit_urb(this_urb, GFP_ATOMIC);
 261                         if (err) {
 262                                 dev_err(&port->dev,
 263                                         "%s: submit urb %d failed: %d\n",
 264                                         __func__, i, err);
 265                                 clear_bit(i, &portdata->out_busy);
 266                                 spin_lock_irqsave(&intfdata->susp_lock, flags);
 267                                 intfdata->in_flight--;
 268                                 spin_unlock_irqrestore(&intfdata->susp_lock,
 269                                                        flags);
 270                                 usb_autopm_put_interface_async(port->serial->interface);
 271                                 break;
 272                         }
 273                 }
 274
 275                 portdata->tx_start_time[i] = jiffies;
 276                 buf += todo;
 277                 left -= todo;
 278         }
 279
 280         count -= left;
 281         dev_dbg(&port->dev, "%s: wrote (did %d)\n", __func__, count);
 282         return count;
 283 }
 284 EXPORT_SYMBOL(usb_wwan_write);
 285
 286 static void usb_wwan_indat_callback(struct urb *urb)
 287 {
 288         int err;
 289         int endpoint;
 290         struct usb_serial_port *port;
 291         struct device *dev;
 292         unsigned char *data = urb->transfer_buffer;
 293         int status = urb->status;
 294
 295         endpoint = usb_pipeendpoint(urb->pipe);
 296         port = urb->context;
 297         dev = &port->dev;
 298
 299         if (status) {
 300                 dev_dbg(dev, "%s: nonzero status: %d on endpoint %02x.\n",
 301                         __func__, status, endpoint);
 302         } else {
 303                 if (urb->actual_length) {
 304                         tty_insert_flip_string(&port->port, data,
 305                                         urb->actual_length);
 306                         tty_flip_buffer_push(&port->port);
 307                 } else
 308                         dev_dbg(dev, "%s: empty read urb received\n", __func__);
 309         }
 310         /* Resubmit urb so we continue receiving */
 311         err = usb_submit_urb(urb, GFP_ATOMIC);
 312         if (err) {
 313                 if (err != -EPERM && err != -ENODEV) {
 314                         dev_err(dev, "%s: resubmit read urb failed. (%d)\n",
 315                                 __func__, err);
 316                         /* busy also in error unless we are killed */
 317                         usb_mark_last_busy(port->serial->dev);
 318                 }
 319         } else {
 320                 usb_mark_last_busy(port->serial->dev);
 321         }
 322 }
 323
 324 static void usb_wwan_outdat_callback(struct urb *urb)
 325 {
 326         struct usb_serial_port *port;
 327         struct usb_wwan_port_private *portdata;
 328         struct usb_wwan_intf_private *intfdata;
 329         int i;
 330
 331         port = urb->context;
 332         intfdata = usb_get_serial_data(port->serial);
 333
 334         usb_serial_port_softint(port);
 335         usb_autopm_put_interface_async(port->serial->interface);
 336         portdata = usb_get_serial_port_data(port);
 337         spin_lock(&intfdata->susp_lock);
 338         intfdata->in_flight--;
 339         spin_unlock(&intfdata->susp_lock);
 340
 341         for (i = 0; i < N_OUT_URB; ++i) {
 342                 if (portdata->out_urbs[i] == urb) {
 343                         smp_mb__before_atomic();
 344                         clear_bit(i, &portdata->out_busy);
 345                         break;
 346                 }
 347         }
 348 }
 349
 350 int usb_wwan_write_room(struct tty_struct *tty)
 351 {
 352         struct usb_serial_port *port = tty->driver_data;
 353         struct usb_wwan_port_private *portdata;
 354         int i;
 355         int data_len = 0;
 356         struct urb *this_urb;
 357
 358         portdata = usb_get_serial_port_data(port);
 359
 360         for (i = 0; i < N_OUT_URB; i++) {
 361                 this_urb = portdata->out_urbs[i];
 362                 if (this_urb && !test_bit(i, &portdata->out_busy))
 363                         data_len += OUT_BUFLEN;
 364         }
 365
 366         dev_dbg(&port->dev, "%s: %d\n", __func__, data_len);
 367         return data_len;
 368 }
 369 EXPORT_SYMBOL(usb_wwan_write_room);
 370
 371 int usb_wwan_chars_in_buffer(struct tty_struct *tty)
 372 {
 373         struct usb_serial_port *port = tty->driver_data;
 374         struct usb_wwan_port_private *portdata;
 375         int i;
 376         int data_len = 0;
 377         struct urb *this_urb;
 378
 379         portdata = usb_get_serial_port_data(port);
 380
 381         for (i = 0; i < N_OUT_URB; i++) {
 382                 this_urb = portdata->out_urbs[i];
 383                 /* FIXME: This locking is insufficient as this_urb may
 384                    go unused during the test */
 385                 if (this_urb && test_bit(i, &portdata->out_busy))
 386                         data_len += this_urb->transfer_buffer_length;
 387         }
 388         dev_dbg(&port->dev, "%s: %d\n", __func__, data_len);
 389         return data_len;
 390 }
 391 EXPORT_SYMBOL(usb_wwan_chars_in_buffer);
 392
 393 int usb_wwan_open(struct tty_struct *tty, struct usb_serial_port *port)
 394 {
 395         struct usb_wwan_port_private *portdata;
 396         struct usb_wwan_intf_private *intfdata;
 397         struct usb_serial *serial = port->serial;
 398         int i, err;
 399         struct urb *urb;
 400
 401         portdata = usb_get_serial_port_data(port);
 402         intfdata = usb_get_serial_data(serial);
 403
 404         if (port->interrupt_in_urb) {
 405                 err = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL);
 406                 if (err) {
 407                         dev_err(&port->dev, "%s: submit int urb failed: %d\n",
 408                                 __func__, err);
 409                 }
 410         }
 411
 412         /* Start reading from the IN endpoint */
 413         for (i = 0; i < N_IN_URB; i++) {
 414                 urb = portdata->in_urbs[i];
 415                 if (!urb)
 416                         continue;
 417                 err = usb_submit_urb(urb, GFP_KERNEL);
 418                 if (err) {
 419                         dev_err(&port->dev,
 420                                 "%s: submit read urb %d failed: %d\n",
 421                                 __func__, i, err);
 422                 }
 423         }
 424
 425         spin_lock_irq(&intfdata->susp_lock);
 426         if (++intfdata->open_ports == 1)
 427                 serial->interface->needs_remote_wakeup = 1;
 428         spin_unlock_irq(&intfdata->susp_lock);
 429         /* this balances a get in the generic USB serial code */
 430         usb_autopm_put_interface(serial->interface);
 431
 432         return 0;
 433 }
 434 EXPORT_SYMBOL(usb_wwan_open);
 435
 436 static void unbusy_queued_urb(struct urb *urb,
 437                                         struct usb_wwan_port_private *portdata)
 438 {
 439         int i;
 440
 441         for (i = 0; i < N_OUT_URB; i++) {
 442                 if (urb == portdata->out_urbs[i]) {
 443                         clear_bit(i, &portdata->out_busy);
 444                         break;
 445                 }
 446         }
 447 }
 448
 449 void usb_wwan_close(struct usb_serial_port *port)
 450 {
 451         int i;
 452         struct usb_serial *serial = port->serial;
 453         struct usb_wwan_port_private *portdata;
 454         struct usb_wwan_intf_private *intfdata = usb_get_serial_data(serial);
 455         struct urb *urb;
 456
 457         portdata = usb_get_serial_port_data(port);
 458
 459         /*
 460          * Need to take susp_lock to make sure port is not already being
 461          * resumed, but no need to hold it due to initialized
 462          */
 463         spin_lock_irq(&intfdata->susp_lock);
 464         if (--intfdata->open_ports == 0)
 465                 serial->interface->needs_remote_wakeup = 0;
 466         spin_unlock_irq(&intfdata->susp_lock);
 467
 468         for (;;) {
 469                 urb = usb_get_from_anchor(&portdata->delayed);
 470                 if (!urb)
 471                         break;
 472                 unbusy_queued_urb(urb, portdata);
 473                 usb_autopm_put_interface_async(serial->interface);
 474         }
 475
 476         for (i = 0; i < N_IN_URB; i++)
 477                 usb_kill_urb(portdata->in_urbs[i]);
 478         for (i = 0; i < N_OUT_URB; i++)
 479                 usb_kill_urb(portdata->out_urbs[i]);
 480         usb_kill_urb(port->interrupt_in_urb);
 481
 482         usb_autopm_get_interface_no_resume(serial->interface);
 483 }
 484 EXPORT_SYMBOL(usb_wwan_close);
 485
 486 static struct urb *usb_wwan_setup_urb(struct usb_serial_port *port,
 487                                       int endpoint,
 488                                       int dir, void *ctx, char *buf, int len,
 489                                       void (*callback) (struct urb *))
 490 {
 491         struct usb_serial *serial = port->serial;
 492         struct urb *urb;
 493
 494         urb = usb_alloc_urb(0, GFP_KERNEL);     /* No ISO */
 495         if (!urb)
 496                 return NULL;
 497
 498         usb_fill_bulk_urb(urb, serial->dev,
 499                           usb_sndbulkpipe(serial->dev, endpoint) | dir,
 500                           buf, len, callback, ctx);
 501
 502         return urb;
 503 }
 504
 505 int usb_wwan_port_probe(struct usb_serial_port *port)
 506 {
 507         struct usb_wwan_port_private *portdata;
 508         struct urb *urb;
 509         u8 *buffer;
 510         int i;
 511
 512         if (!port->bulk_in_size || !port->bulk_out_size)
 513                 return -ENODEV;
 514
 515         portdata = kzalloc(sizeof(*portdata), GFP_KERNEL);
 516         if (!portdata)
 517                 return -ENOMEM;
 518
 519         init_usb_anchor(&portdata->delayed);
 520
 521         for (i = 0; i < N_IN_URB; i++) {
 522                 buffer = (u8 *)__get_free_page(GFP_KERNEL);
 523                 if (!buffer)
 524                         goto bail_out_error;
 525                 portdata->in_buffer[i] = buffer;
 526
 527                 urb = usb_wwan_setup_urb(port, port->bulk_in_endpointAddress,
 528                                                 USB_DIR_IN, port,
 529                                                 buffer, IN_BUFLEN,
 530                                                 usb_wwan_indat_callback);
 531                 portdata->in_urbs[i] = urb;
 532         }
 533
 534         for (i = 0; i < N_OUT_URB; i++) {
 535                 buffer = kmalloc(OUT_BUFLEN, GFP_KERNEL);
 536                 if (!buffer)
 537                         goto bail_out_error2;
 538                 portdata->out_buffer[i] = buffer;
 539
 540                 urb = usb_wwan_setup_urb(port, port->bulk_out_endpointAddress,
 541                                                 USB_DIR_OUT, port,
 542                                                 buffer, OUT_BUFLEN,
 543                                                 usb_wwan_outdat_callback);
 544                 portdata->out_urbs[i] = urb;
 545         }
 546
 547         usb_set_serial_port_data(port, portdata);
 548
 549         return 0;
 550
 551 bail_out_error2:
 552         for (i = 0; i < N_OUT_URB; i++) {
 553                 usb_free_urb(portdata->out_urbs[i]);
 554                 kfree(portdata->out_buffer[i]);
 555         }
 556 bail_out_error:
 557         for (i = 0; i < N_IN_URB; i++) {
 558                 usb_free_urb(portdata->in_urbs[i]);
 559                 free_page((unsigned long)portdata->in_buffer[i]);
 560         }
 561         kfree(portdata);
 562
 563         return -ENOMEM;
 564 }
 565 EXPORT_SYMBOL_GPL(usb_wwan_port_probe);
 566
 567 int usb_wwan_port_remove(struct usb_serial_port *port)
 568 {
 569         int i;
 570         struct usb_wwan_port_private *portdata;
 571
 572         portdata = usb_get_serial_port_data(port);
 573         usb_set_serial_port_data(port, NULL);
 574
 575         for (i = 0; i < N_IN_URB; i++) {
 576                 usb_free_urb(portdata->in_urbs[i]);
 577                 free_page((unsigned long)portdata->in_buffer[i]);
 578         }
 579         for (i = 0; i < N_OUT_URB; i++) {
 580                 usb_free_urb(portdata->out_urbs[i]);
 581                 kfree(portdata->out_buffer[i]);
 582         }
 583
 584         kfree(portdata);
 585
 586         return 0;
 587 }
 588 EXPORT_SYMBOL(usb_wwan_port_remove);
 589
 590 #ifdef CONFIG_PM
 591 static void stop_urbs(struct usb_serial *serial)
 592 {
 593         int i, j;
 594         struct usb_serial_port *port;
 595         struct usb_wwan_port_private *portdata;
 596
 597         for (i = 0; i < serial->num_ports; ++i) {
 598                 port = serial->port[i];
 599                 portdata = usb_get_serial_port_data(port);
 600                 if (!portdata)
 601                         continue;
 602                 for (j = 0; j < N_IN_URB; j++)
 603                         usb_kill_urb(portdata->in_urbs[j]);
 604                 for (j = 0; j < N_OUT_URB; j++)
 605                         usb_kill_urb(portdata->out_urbs[j]);
 606                 usb_kill_urb(port->interrupt_in_urb);
 607         }
 608 }
 609
 610 int usb_wwan_suspend(struct usb_serial *serial, pm_message_t message)
 611 {
 612         struct usb_wwan_intf_private *intfdata = usb_get_serial_data(serial);
 613
 614         spin_lock_irq(&intfdata->susp_lock);
 615         if (PMSG_IS_AUTO(message)) {
 616                 if (intfdata->in_flight) {
 617                         spin_unlock_irq(&intfdata->susp_lock);
 618                         return -EBUSY;
 619                 }
 620         }
 621         intfdata->suspended = 1;
 622         spin_unlock_irq(&intfdata->susp_lock);
 623
 624         stop_urbs(serial);
 625
 626         return 0;
 627 }
 628 EXPORT_SYMBOL(usb_wwan_suspend);
 629
 630 /* Caller must hold susp_lock. */
 631 static int usb_wwan_submit_delayed_urbs(struct usb_serial_port *port)
 632 {
 633         struct usb_serial *serial = port->serial;
 634         struct usb_wwan_intf_private *data = usb_get_serial_data(serial);
 635         struct usb_wwan_port_private *portdata;
 636         struct urb *urb;
 637         int err_count = 0;
 638         int err;
 639
 640         portdata = usb_get_serial_port_data(port);
 641
 642         for (;;) {
 643                 urb = usb_get_from_anchor(&portdata->delayed);
 644                 if (!urb)
 645                         break;
 646
 647                 err = usb_submit_urb(urb, GFP_ATOMIC);
 648                 if (err) {
 649                         dev_err(&port->dev, "%s: submit urb failed: %d\n",
 650                                         __func__, err);
 651                         err_count++;
 652                         unbusy_queued_urb(urb, portdata);
 653                         usb_autopm_put_interface_async(serial->interface);
 654                         continue;
 655                 }
 656                 data->in_flight++;
 657         }
 658
 659         if (err_count)
 660                 return -EIO;
 661
 662         return 0;
 663 }
 664
 665 int usb_wwan_resume(struct usb_serial *serial)
 666 {
 667         int i, j;
 668         struct usb_serial_port *port;
 669         struct usb_wwan_intf_private *intfdata = usb_get_serial_data(serial);
 670         struct usb_wwan_port_private *portdata;
 671         struct urb *urb;
 672         int err;
 673         int err_count = 0;
 674
 675         spin_lock_irq(&intfdata->susp_lock);
 676         for (i = 0; i < serial->num_ports; i++) {
 677                 port = serial->port[i];
 678
 679                 if (!tty_port_initialized(&port->port))
 680                         continue;
 681
 682                 portdata = usb_get_serial_port_data(port);
 683
 684                 if (port->interrupt_in_urb) {
 685                         err = usb_submit_urb(port->interrupt_in_urb,
 686                                         GFP_ATOMIC);
 687                         if (err) {
 688                                 dev_err(&port->dev,
 689                                         "%s: submit int urb failed: %d\n",
 690                                         __func__, err);
 691                                 err_count++;
 692                         }
 693                 }
 694
 695                 err = usb_wwan_submit_delayed_urbs(port);
 696                 if (err)
 697                         err_count++;
 698
 699                 for (j = 0; j < N_IN_URB; j++) {
 700                         urb = portdata->in_urbs[j];
 701                         err = usb_submit_urb(urb, GFP_ATOMIC);
 702                         if (err < 0) {
 703                                 dev_err(&port->dev,
 704                                         "%s: submit read urb %d failed: %d\n",
 705                                         __func__, i, err);
 706                                 err_count++;
 707                         }
 708                 }
 709         }
 710         intfdata->suspended = 0;
 711         spin_unlock_irq(&intfdata->susp_lock);
 712
 713         if (err_count)
 714                 return -EIO;
 715
 716         return 0;
 717 }
 718 EXPORT_SYMBOL(usb_wwan_resume);
 719 #endif
 720
 721 MODULE_AUTHOR(DRIVER_AUTHOR);
 722 MODULE_DESCRIPTION(DRIVER_DESC);
 723 MODULE_LICENSE("GPL v2");