2 * Copyright (C) 2012 Samsung Electronics Co.Ltd
5 * This program is free software; you can redistribute it and/or modify
6 * it under the terms of the GNU General Public License version 2 as
7 * published by the Free Software Foundationr
10 #include <linux/kernel.h>
11 #include <linux/clk.h>
12 #include <linux/err.h>
13 #include <linux/interrupt.h>
15 #include <linux/platform_device.h>
16 #include <linux/pm_runtime.h>
17 #include <linux/slab.h>
18 #include <linux/workqueue.h>
19 #include <linux/dma-mapping.h>
23 #include <drm/exynos_drm.h>
24 #include "exynos_drm_drv.h"
25 #include "exynos_drm_g2d.h"
26 #include "exynos_drm_gem.h"
27 #include "exynos_drm_iommu.h"
29 #define G2D_HW_MAJOR_VER 4
30 #define G2D_HW_MINOR_VER 1
32 /* vaild register range set from user: 0x0104 ~ 0x0880 */
33 #define G2D_VALID_START 0x0104
34 #define G2D_VALID_END 0x0880
36 /* general registers */
37 #define G2D_SOFT_RESET 0x0000
38 #define G2D_INTEN 0x0004
39 #define G2D_INTC_PEND 0x000C
40 #define G2D_DMA_SFR_BASE_ADDR 0x0080
41 #define G2D_DMA_COMMAND 0x0084
42 #define G2D_DMA_STATUS 0x008C
43 #define G2D_DMA_HOLD_CMD 0x0090
45 /* command registers */
46 #define G2D_BITBLT_START 0x0100
48 /* registers for base address */
49 #define G2D_SRC_BASE_ADDR 0x0304
50 #define G2D_SRC_STRIDE 0x0308
51 #define G2D_SRC_COLOR_MODE 0x030C
52 #define G2D_SRC_LEFT_TOP 0x0310
53 #define G2D_SRC_RIGHT_BOTTOM 0x0314
54 #define G2D_SRC_PLANE2_BASE_ADDR 0x0318
55 #define G2D_DST_BASE_ADDR 0x0404
56 #define G2D_DST_STRIDE 0x0408
57 #define G2D_DST_COLOR_MODE 0x040C
58 #define G2D_DST_LEFT_TOP 0x0410
59 #define G2D_DST_RIGHT_BOTTOM 0x0414
60 #define G2D_DST_PLANE2_BASE_ADDR 0x0418
61 #define G2D_PAT_BASE_ADDR 0x0500
62 #define G2D_MSK_BASE_ADDR 0x0520
65 #define G2D_SFRCLEAR (1 << 1)
66 #define G2D_R (1 << 0)
69 #define G2D_INTEN_ACF (1 << 3)
70 #define G2D_INTEN_UCF (1 << 2)
71 #define G2D_INTEN_GCF (1 << 1)
72 #define G2D_INTEN_SCF (1 << 0)
75 #define G2D_INTP_ACMD_FIN (1 << 3)
76 #define G2D_INTP_UCMD_FIN (1 << 2)
77 #define G2D_INTP_GCMD_FIN (1 << 1)
78 #define G2D_INTP_SCMD_FIN (1 << 0)
81 #define G2D_DMA_HALT (1 << 2)
82 #define G2D_DMA_CONTINUE (1 << 1)
83 #define G2D_DMA_START (1 << 0)
86 #define G2D_DMA_LIST_DONE_COUNT (0xFF << 17)
87 #define G2D_DMA_BITBLT_DONE_COUNT (0xFFFF << 1)
88 #define G2D_DMA_DONE (1 << 0)
89 #define G2D_DMA_LIST_DONE_COUNT_OFFSET 17
91 /* G2D_DMA_HOLD_CMD */
92 #define G2D_USER_HOLD (1 << 2)
93 #define G2D_LIST_HOLD (1 << 1)
94 #define G2D_BITBLT_HOLD (1 << 0)
96 /* G2D_BITBLT_START */
97 #define G2D_START_CASESEL (1 << 2)
98 #define G2D_START_NHOLT (1 << 1)
99 #define G2D_START_BITBLT (1 << 0)
101 /* buffer color format */
102 #define G2D_FMT_XRGB8888 0
103 #define G2D_FMT_ARGB8888 1
104 #define G2D_FMT_RGB565 2
105 #define G2D_FMT_XRGB1555 3
106 #define G2D_FMT_ARGB1555 4
107 #define G2D_FMT_XRGB4444 5
108 #define G2D_FMT_ARGB4444 6
109 #define G2D_FMT_PACKED_RGB888 7
110 #define G2D_FMT_A8 11
111 #define G2D_FMT_L8 12
113 /* buffer valid length */
114 #define G2D_LEN_MIN 1
115 #define G2D_LEN_MAX 8000
117 #define G2D_CMDLIST_SIZE (PAGE_SIZE / 4)
118 #define G2D_CMDLIST_NUM 64
119 #define G2D_CMDLIST_POOL_SIZE (G2D_CMDLIST_SIZE * G2D_CMDLIST_NUM)
120 #define G2D_CMDLIST_DATA_NUM (G2D_CMDLIST_SIZE / sizeof(u32) - 2)
122 /* maximum buffer pool size of userptr is 64MB as default */
123 #define MAX_POOL (64 * 1024 * 1024)
143 * If set, suspends the runqueue worker after the currently
144 * processed node is finished.
146 G2D_BIT_SUSPEND_RUNQUEUE,
148 * If set, indicates that the engine is currently busy.
153 /* cmdlist data structure */
156 unsigned long data[G2D_CMDLIST_DATA_NUM];
157 u32 last; /* last data offset */
161 * A structure of buffer description
163 * @format: color format
164 * @stride: buffer stride/pitch in bytes
165 * @left_x: the x coordinates of left top corner
166 * @top_y: the y coordinates of left top corner
167 * @right_x: the x coordinates of right bottom corner
168 * @bottom_y: the y coordinates of right bottom corner
171 struct g2d_buf_desc {
176 unsigned int right_x;
177 unsigned int bottom_y;
181 * A structure of buffer information
183 * @map_nr: manages the number of mapped buffers
184 * @reg_types: stores regitster type in the order of requested command
185 * @handles: stores buffer handle in its reg_type position
186 * @types: stores buffer type in its reg_type position
187 * @descs: stores buffer description in its reg_type position
190 struct g2d_buf_info {
192 enum g2d_reg_type reg_types[MAX_REG_TYPE_NR];
193 unsigned long handles[MAX_REG_TYPE_NR];
194 unsigned int types[MAX_REG_TYPE_NR];
195 struct g2d_buf_desc descs[MAX_REG_TYPE_NR];
198 struct drm_exynos_pending_g2d_event {
199 struct drm_pending_event base;
200 struct drm_exynos_g2d_event event;
203 struct g2d_cmdlist_userptr {
204 struct list_head list;
206 unsigned long userptr;
208 struct frame_vector *vec;
209 struct sg_table *sgt;
214 struct g2d_cmdlist_node {
215 struct list_head list;
216 struct g2d_cmdlist *cmdlist;
218 struct g2d_buf_info buf_info;
220 struct drm_exynos_pending_g2d_event *event;
223 struct g2d_runqueue_node {
224 struct list_head list;
225 struct list_head run_cmdlist;
226 struct list_head event_list;
227 struct drm_file *filp;
229 struct completion complete;
235 struct clk *gate_clk;
238 struct workqueue_struct *g2d_workq;
239 struct work_struct runqueue_work;
240 struct exynos_drm_subdrv subdrv;
244 struct g2d_cmdlist_node *cmdlist_node;
245 struct list_head free_cmdlist;
246 struct mutex cmdlist_mutex;
247 dma_addr_t cmdlist_pool;
248 void *cmdlist_pool_virt;
249 unsigned long cmdlist_dma_attrs;
252 struct g2d_runqueue_node *runqueue_node;
253 struct list_head runqueue;
254 struct mutex runqueue_mutex;
255 struct kmem_cache *runqueue_slab;
257 unsigned long current_pool;
258 unsigned long max_pool;
261 static inline void g2d_hw_reset(struct g2d_data *g2d)
263 writel(G2D_R | G2D_SFRCLEAR, g2d->regs + G2D_SOFT_RESET);
264 clear_bit(G2D_BIT_ENGINE_BUSY, &g2d->flags);
267 static int g2d_init_cmdlist(struct g2d_data *g2d)
269 struct device *dev = g2d->dev;
270 struct g2d_cmdlist_node *node = g2d->cmdlist_node;
271 struct exynos_drm_subdrv *subdrv = &g2d->subdrv;
274 struct g2d_buf_info *buf_info;
276 g2d->cmdlist_dma_attrs = DMA_ATTR_WRITE_COMBINE;
278 g2d->cmdlist_pool_virt = dma_alloc_attrs(to_dma_dev(subdrv->drm_dev),
279 G2D_CMDLIST_POOL_SIZE,
280 &g2d->cmdlist_pool, GFP_KERNEL,
281 g2d->cmdlist_dma_attrs);
282 if (!g2d->cmdlist_pool_virt) {
283 dev_err(dev, "failed to allocate dma memory\n");
287 node = kcalloc(G2D_CMDLIST_NUM, sizeof(*node), GFP_KERNEL);
293 for (nr = 0; nr < G2D_CMDLIST_NUM; nr++) {
297 g2d->cmdlist_pool_virt + nr * G2D_CMDLIST_SIZE;
299 g2d->cmdlist_pool + nr * G2D_CMDLIST_SIZE;
301 buf_info = &node[nr].buf_info;
302 for (i = 0; i < MAX_REG_TYPE_NR; i++)
303 buf_info->reg_types[i] = REG_TYPE_NONE;
305 list_add_tail(&node[nr].list, &g2d->free_cmdlist);
311 dma_free_attrs(to_dma_dev(subdrv->drm_dev), G2D_CMDLIST_POOL_SIZE,
312 g2d->cmdlist_pool_virt,
313 g2d->cmdlist_pool, g2d->cmdlist_dma_attrs);
317 static void g2d_fini_cmdlist(struct g2d_data *g2d)
319 struct exynos_drm_subdrv *subdrv = &g2d->subdrv;
321 kfree(g2d->cmdlist_node);
323 if (g2d->cmdlist_pool_virt && g2d->cmdlist_pool) {
324 dma_free_attrs(to_dma_dev(subdrv->drm_dev),
325 G2D_CMDLIST_POOL_SIZE,
326 g2d->cmdlist_pool_virt,
327 g2d->cmdlist_pool, g2d->cmdlist_dma_attrs);
331 static struct g2d_cmdlist_node *g2d_get_cmdlist(struct g2d_data *g2d)
333 struct device *dev = g2d->dev;
334 struct g2d_cmdlist_node *node;
336 mutex_lock(&g2d->cmdlist_mutex);
337 if (list_empty(&g2d->free_cmdlist)) {
338 dev_err(dev, "there is no free cmdlist\n");
339 mutex_unlock(&g2d->cmdlist_mutex);
343 node = list_first_entry(&g2d->free_cmdlist, struct g2d_cmdlist_node,
345 list_del_init(&node->list);
346 mutex_unlock(&g2d->cmdlist_mutex);
351 static void g2d_put_cmdlist(struct g2d_data *g2d, struct g2d_cmdlist_node *node)
353 mutex_lock(&g2d->cmdlist_mutex);
354 list_move_tail(&node->list, &g2d->free_cmdlist);
355 mutex_unlock(&g2d->cmdlist_mutex);
358 static void g2d_add_cmdlist_to_inuse(struct exynos_drm_g2d_private *g2d_priv,
359 struct g2d_cmdlist_node *node)
361 struct g2d_cmdlist_node *lnode;
363 if (list_empty(&g2d_priv->inuse_cmdlist))
366 /* this links to base address of new cmdlist */
367 lnode = list_entry(g2d_priv->inuse_cmdlist.prev,
368 struct g2d_cmdlist_node, list);
369 lnode->cmdlist->data[lnode->cmdlist->last] = node->dma_addr;
372 list_add_tail(&node->list, &g2d_priv->inuse_cmdlist);
375 list_add_tail(&node->event->base.link, &g2d_priv->event_list);
378 static void g2d_userptr_put_dma_addr(struct drm_device *drm_dev,
382 struct g2d_cmdlist_userptr *g2d_userptr =
383 (struct g2d_cmdlist_userptr *)obj;
392 atomic_dec(&g2d_userptr->refcount);
394 if (atomic_read(&g2d_userptr->refcount) > 0)
397 if (g2d_userptr->in_pool)
401 dma_unmap_sg(to_dma_dev(drm_dev), g2d_userptr->sgt->sgl,
402 g2d_userptr->sgt->nents, DMA_BIDIRECTIONAL);
404 pages = frame_vector_pages(g2d_userptr->vec);
405 if (!IS_ERR(pages)) {
408 for (i = 0; i < frame_vector_count(g2d_userptr->vec); i++)
409 set_page_dirty_lock(pages[i]);
411 put_vaddr_frames(g2d_userptr->vec);
412 frame_vector_destroy(g2d_userptr->vec);
414 if (!g2d_userptr->out_of_list)
415 list_del_init(&g2d_userptr->list);
417 sg_free_table(g2d_userptr->sgt);
418 kfree(g2d_userptr->sgt);
422 static dma_addr_t *g2d_userptr_get_dma_addr(struct drm_device *drm_dev,
423 unsigned long userptr,
425 struct drm_file *filp,
428 struct drm_exynos_file_private *file_priv = filp->driver_priv;
429 struct exynos_drm_g2d_private *g2d_priv = file_priv->g2d_priv;
430 struct g2d_cmdlist_userptr *g2d_userptr;
431 struct g2d_data *g2d;
432 struct sg_table *sgt;
433 unsigned long start, end;
434 unsigned int npages, offset;
438 DRM_ERROR("invalid userptr size.\n");
439 return ERR_PTR(-EINVAL);
442 g2d = dev_get_drvdata(g2d_priv->dev);
444 /* check if userptr already exists in userptr_list. */
445 list_for_each_entry(g2d_userptr, &g2d_priv->userptr_list, list) {
446 if (g2d_userptr->userptr == userptr) {
448 * also check size because there could be same address
449 * and different size.
451 if (g2d_userptr->size == size) {
452 atomic_inc(&g2d_userptr->refcount);
453 *obj = (unsigned long)g2d_userptr;
455 return &g2d_userptr->dma_addr;
459 * at this moment, maybe g2d dma is accessing this
460 * g2d_userptr memory region so just remove this
461 * g2d_userptr object from userptr_list not to be
462 * referred again and also except it the userptr
463 * pool to be released after the dma access completion.
465 g2d_userptr->out_of_list = true;
466 g2d_userptr->in_pool = false;
467 list_del_init(&g2d_userptr->list);
473 g2d_userptr = kzalloc(sizeof(*g2d_userptr), GFP_KERNEL);
475 return ERR_PTR(-ENOMEM);
477 atomic_set(&g2d_userptr->refcount, 1);
478 g2d_userptr->size = size;
480 start = userptr & PAGE_MASK;
481 offset = userptr & ~PAGE_MASK;
482 end = PAGE_ALIGN(userptr + size);
483 npages = (end - start) >> PAGE_SHIFT;
484 g2d_userptr->vec = frame_vector_create(npages);
485 if (!g2d_userptr->vec) {
490 ret = get_vaddr_frames(start, npages, FOLL_FORCE | FOLL_WRITE,
493 DRM_ERROR("failed to get user pages from userptr.\n");
495 goto err_destroy_framevec;
497 goto err_put_framevec;
499 if (frame_vector_to_pages(g2d_userptr->vec) < 0) {
501 goto err_put_framevec;
504 sgt = kzalloc(sizeof(*sgt), GFP_KERNEL);
507 goto err_put_framevec;
510 ret = sg_alloc_table_from_pages(sgt,
511 frame_vector_pages(g2d_userptr->vec),
512 npages, offset, size, GFP_KERNEL);
514 DRM_ERROR("failed to get sgt from pages.\n");
518 g2d_userptr->sgt = sgt;
520 if (!dma_map_sg(to_dma_dev(drm_dev), sgt->sgl, sgt->nents,
521 DMA_BIDIRECTIONAL)) {
522 DRM_ERROR("failed to map sgt with dma region.\n");
524 goto err_sg_free_table;
527 g2d_userptr->dma_addr = sgt->sgl[0].dma_address;
528 g2d_userptr->userptr = userptr;
530 list_add_tail(&g2d_userptr->list, &g2d_priv->userptr_list);
532 if (g2d->current_pool + (npages << PAGE_SHIFT) < g2d->max_pool) {
533 g2d->current_pool += npages << PAGE_SHIFT;
534 g2d_userptr->in_pool = true;
537 *obj = (unsigned long)g2d_userptr;
539 return &g2d_userptr->dma_addr;
548 put_vaddr_frames(g2d_userptr->vec);
550 err_destroy_framevec:
551 frame_vector_destroy(g2d_userptr->vec);
559 static void g2d_userptr_free_all(struct drm_device *drm_dev,
560 struct g2d_data *g2d,
561 struct drm_file *filp)
563 struct drm_exynos_file_private *file_priv = filp->driver_priv;
564 struct exynos_drm_g2d_private *g2d_priv = file_priv->g2d_priv;
565 struct g2d_cmdlist_userptr *g2d_userptr, *n;
567 list_for_each_entry_safe(g2d_userptr, n, &g2d_priv->userptr_list, list)
568 if (g2d_userptr->in_pool)
569 g2d_userptr_put_dma_addr(drm_dev,
570 (unsigned long)g2d_userptr,
573 g2d->current_pool = 0;
576 static enum g2d_reg_type g2d_get_reg_type(int reg_offset)
578 enum g2d_reg_type reg_type;
580 switch (reg_offset) {
581 case G2D_SRC_BASE_ADDR:
583 case G2D_SRC_COLOR_MODE:
584 case G2D_SRC_LEFT_TOP:
585 case G2D_SRC_RIGHT_BOTTOM:
586 reg_type = REG_TYPE_SRC;
588 case G2D_SRC_PLANE2_BASE_ADDR:
589 reg_type = REG_TYPE_SRC_PLANE2;
591 case G2D_DST_BASE_ADDR:
593 case G2D_DST_COLOR_MODE:
594 case G2D_DST_LEFT_TOP:
595 case G2D_DST_RIGHT_BOTTOM:
596 reg_type = REG_TYPE_DST;
598 case G2D_DST_PLANE2_BASE_ADDR:
599 reg_type = REG_TYPE_DST_PLANE2;
601 case G2D_PAT_BASE_ADDR:
602 reg_type = REG_TYPE_PAT;
604 case G2D_MSK_BASE_ADDR:
605 reg_type = REG_TYPE_MSK;
608 reg_type = REG_TYPE_NONE;
609 DRM_ERROR("Unknown register offset![%d]\n", reg_offset);
616 static unsigned long g2d_get_buf_bpp(unsigned int format)
621 case G2D_FMT_XRGB8888:
622 case G2D_FMT_ARGB8888:
626 case G2D_FMT_XRGB1555:
627 case G2D_FMT_ARGB1555:
628 case G2D_FMT_XRGB4444:
629 case G2D_FMT_ARGB4444:
632 case G2D_FMT_PACKED_RGB888:
643 static bool g2d_check_buf_desc_is_valid(struct g2d_buf_desc *buf_desc,
644 enum g2d_reg_type reg_type,
648 unsigned long bpp, last_pos;
651 * check source and destination buffers only.
652 * so the others are always valid.
654 if (reg_type != REG_TYPE_SRC && reg_type != REG_TYPE_DST)
657 /* This check also makes sure that right_x > left_x. */
658 width = (int)buf_desc->right_x - (int)buf_desc->left_x;
659 if (width < G2D_LEN_MIN || width > G2D_LEN_MAX) {
660 DRM_ERROR("width[%d] is out of range!\n", width);
664 /* This check also makes sure that bottom_y > top_y. */
665 height = (int)buf_desc->bottom_y - (int)buf_desc->top_y;
666 if (height < G2D_LEN_MIN || height > G2D_LEN_MAX) {
667 DRM_ERROR("height[%d] is out of range!\n", height);
671 bpp = g2d_get_buf_bpp(buf_desc->format);
673 /* Compute the position of the last byte that the engine accesses. */
674 last_pos = ((unsigned long)buf_desc->bottom_y - 1) *
675 (unsigned long)buf_desc->stride +
676 (unsigned long)buf_desc->right_x * bpp - 1;
679 * Since right_x > left_x and bottom_y > top_y we already know
680 * that the first_pos < last_pos (first_pos being the position
681 * of the first byte the engine accesses), it just remains to
682 * check if last_pos is smaller then the buffer size.
685 if (last_pos >= size) {
686 DRM_ERROR("last engine access position [%lu] "
687 "is out of range [%lu]!\n", last_pos, size);
694 static int g2d_map_cmdlist_gem(struct g2d_data *g2d,
695 struct g2d_cmdlist_node *node,
696 struct drm_device *drm_dev,
697 struct drm_file *file)
699 struct g2d_cmdlist *cmdlist = node->cmdlist;
700 struct g2d_buf_info *buf_info = &node->buf_info;
705 for (i = 0; i < buf_info->map_nr; i++) {
706 struct g2d_buf_desc *buf_desc;
707 enum g2d_reg_type reg_type;
709 unsigned long handle;
712 reg_pos = cmdlist->last - 2 * (i + 1);
714 offset = cmdlist->data[reg_pos];
715 handle = cmdlist->data[reg_pos + 1];
717 reg_type = g2d_get_reg_type(offset);
718 if (reg_type == REG_TYPE_NONE) {
723 buf_desc = &buf_info->descs[reg_type];
725 if (buf_info->types[reg_type] == BUF_TYPE_GEM) {
728 size = exynos_drm_gem_get_size(drm_dev, handle, file);
734 if (!g2d_check_buf_desc_is_valid(buf_desc, reg_type,
740 addr = exynos_drm_gem_get_dma_addr(drm_dev, handle,
747 struct drm_exynos_g2d_userptr g2d_userptr;
749 if (copy_from_user(&g2d_userptr, (void __user *)handle,
750 sizeof(struct drm_exynos_g2d_userptr))) {
755 if (!g2d_check_buf_desc_is_valid(buf_desc, reg_type,
761 addr = g2d_userptr_get_dma_addr(drm_dev,
772 cmdlist->data[reg_pos + 1] = *addr;
773 buf_info->reg_types[i] = reg_type;
774 buf_info->handles[reg_type] = handle;
780 buf_info->map_nr = i;
784 static void g2d_unmap_cmdlist_gem(struct g2d_data *g2d,
785 struct g2d_cmdlist_node *node,
786 struct drm_file *filp)
788 struct exynos_drm_subdrv *subdrv = &g2d->subdrv;
789 struct g2d_buf_info *buf_info = &node->buf_info;
792 for (i = 0; i < buf_info->map_nr; i++) {
793 struct g2d_buf_desc *buf_desc;
794 enum g2d_reg_type reg_type;
795 unsigned long handle;
797 reg_type = buf_info->reg_types[i];
799 buf_desc = &buf_info->descs[reg_type];
800 handle = buf_info->handles[reg_type];
802 if (buf_info->types[reg_type] == BUF_TYPE_GEM)
803 exynos_drm_gem_put_dma_addr(subdrv->drm_dev, handle,
806 g2d_userptr_put_dma_addr(subdrv->drm_dev, handle,
809 buf_info->reg_types[i] = REG_TYPE_NONE;
810 buf_info->handles[reg_type] = 0;
811 buf_info->types[reg_type] = 0;
812 memset(buf_desc, 0x00, sizeof(*buf_desc));
815 buf_info->map_nr = 0;
818 static void g2d_dma_start(struct g2d_data *g2d,
819 struct g2d_runqueue_node *runqueue_node)
821 struct g2d_cmdlist_node *node =
822 list_first_entry(&runqueue_node->run_cmdlist,
823 struct g2d_cmdlist_node, list);
825 set_bit(G2D_BIT_ENGINE_BUSY, &g2d->flags);
826 writel_relaxed(node->dma_addr, g2d->regs + G2D_DMA_SFR_BASE_ADDR);
827 writel_relaxed(G2D_DMA_START, g2d->regs + G2D_DMA_COMMAND);
830 static struct g2d_runqueue_node *g2d_get_runqueue_node(struct g2d_data *g2d)
832 struct g2d_runqueue_node *runqueue_node;
834 if (list_empty(&g2d->runqueue))
837 runqueue_node = list_first_entry(&g2d->runqueue,
838 struct g2d_runqueue_node, list);
839 list_del_init(&runqueue_node->list);
840 return runqueue_node;
843 static void g2d_free_runqueue_node(struct g2d_data *g2d,
844 struct g2d_runqueue_node *runqueue_node)
846 struct g2d_cmdlist_node *node;
848 mutex_lock(&g2d->cmdlist_mutex);
850 * commands in run_cmdlist have been completed so unmap all gem
851 * objects in each command node so that they are unreferenced.
853 list_for_each_entry(node, &runqueue_node->run_cmdlist, list)
854 g2d_unmap_cmdlist_gem(g2d, node, runqueue_node->filp);
855 list_splice_tail_init(&runqueue_node->run_cmdlist, &g2d->free_cmdlist);
856 mutex_unlock(&g2d->cmdlist_mutex);
858 kmem_cache_free(g2d->runqueue_slab, runqueue_node);
862 * g2d_remove_runqueue_nodes - remove items from the list of runqueue nodes
863 * @g2d: G2D state object
864 * @file: if not zero, only remove items with this DRM file
866 * Has to be called under runqueue lock.
868 static void g2d_remove_runqueue_nodes(struct g2d_data *g2d, struct drm_file* file)
870 struct g2d_runqueue_node *node, *n;
872 if (list_empty(&g2d->runqueue))
875 list_for_each_entry_safe(node, n, &g2d->runqueue, list) {
876 if (file && node->filp != file)
879 list_del_init(&node->list);
880 g2d_free_runqueue_node(g2d, node);
884 static void g2d_runqueue_worker(struct work_struct *work)
886 struct g2d_data *g2d = container_of(work, struct g2d_data,
888 struct g2d_runqueue_node *runqueue_node;
891 * The engine is busy and the completion of the current node is going
892 * to poke the runqueue worker, so nothing to do here.
894 if (test_bit(G2D_BIT_ENGINE_BUSY, &g2d->flags))
897 mutex_lock(&g2d->runqueue_mutex);
899 runqueue_node = g2d->runqueue_node;
900 g2d->runqueue_node = NULL;
903 pm_runtime_mark_last_busy(g2d->dev);
904 pm_runtime_put_autosuspend(g2d->dev);
906 complete(&runqueue_node->complete);
907 if (runqueue_node->async)
908 g2d_free_runqueue_node(g2d, runqueue_node);
911 if (!test_bit(G2D_BIT_SUSPEND_RUNQUEUE, &g2d->flags)) {
912 g2d->runqueue_node = g2d_get_runqueue_node(g2d);
914 if (g2d->runqueue_node) {
915 pm_runtime_get_sync(g2d->dev);
916 g2d_dma_start(g2d, g2d->runqueue_node);
920 mutex_unlock(&g2d->runqueue_mutex);
923 static void g2d_finish_event(struct g2d_data *g2d, u32 cmdlist_no)
925 struct drm_device *drm_dev = g2d->subdrv.drm_dev;
926 struct g2d_runqueue_node *runqueue_node = g2d->runqueue_node;
927 struct drm_exynos_pending_g2d_event *e;
928 struct timespec64 now;
930 if (list_empty(&runqueue_node->event_list))
933 e = list_first_entry(&runqueue_node->event_list,
934 struct drm_exynos_pending_g2d_event, base.link);
936 ktime_get_ts64(&now);
937 e->event.tv_sec = now.tv_sec;
938 e->event.tv_usec = now.tv_nsec / NSEC_PER_USEC;
939 e->event.cmdlist_no = cmdlist_no;
941 drm_send_event(drm_dev, &e->base);
944 static irqreturn_t g2d_irq_handler(int irq, void *dev_id)
946 struct g2d_data *g2d = dev_id;
949 pending = readl_relaxed(g2d->regs + G2D_INTC_PEND);
951 writel_relaxed(pending, g2d->regs + G2D_INTC_PEND);
953 if (pending & G2D_INTP_GCMD_FIN) {
954 u32 cmdlist_no = readl_relaxed(g2d->regs + G2D_DMA_STATUS);
956 cmdlist_no = (cmdlist_no & G2D_DMA_LIST_DONE_COUNT) >>
957 G2D_DMA_LIST_DONE_COUNT_OFFSET;
959 g2d_finish_event(g2d, cmdlist_no);
961 writel_relaxed(0, g2d->regs + G2D_DMA_HOLD_CMD);
962 if (!(pending & G2D_INTP_ACMD_FIN)) {
963 writel_relaxed(G2D_DMA_CONTINUE,
964 g2d->regs + G2D_DMA_COMMAND);
968 if (pending & G2D_INTP_ACMD_FIN) {
969 clear_bit(G2D_BIT_ENGINE_BUSY, &g2d->flags);
970 queue_work(g2d->g2d_workq, &g2d->runqueue_work);
977 * g2d_wait_finish - wait for the G2D engine to finish the current runqueue node
978 * @g2d: G2D state object
979 * @file: if not zero, only wait if the current runqueue node belongs
982 * Should the engine not become idle after a 100ms timeout, a hardware
985 static void g2d_wait_finish(struct g2d_data *g2d, struct drm_file *file)
987 struct device *dev = g2d->dev;
989 struct g2d_runqueue_node *runqueue_node = NULL;
990 unsigned int tries = 10;
992 mutex_lock(&g2d->runqueue_mutex);
994 /* If no node is currently processed, we have nothing to do. */
995 if (!g2d->runqueue_node)
998 runqueue_node = g2d->runqueue_node;
1000 /* Check if the currently processed item belongs to us. */
1001 if (file && runqueue_node->filp != file)
1004 mutex_unlock(&g2d->runqueue_mutex);
1006 /* Wait for the G2D engine to finish. */
1007 while (tries-- && (g2d->runqueue_node == runqueue_node))
1010 mutex_lock(&g2d->runqueue_mutex);
1012 if (g2d->runqueue_node != runqueue_node)
1015 dev_err(dev, "wait timed out, resetting engine...\n");
1019 * After the hardware reset of the engine we are going to loose
1020 * the IRQ which triggers the PM runtime put().
1021 * So do this manually here.
1023 pm_runtime_mark_last_busy(dev);
1024 pm_runtime_put_autosuspend(dev);
1026 complete(&runqueue_node->complete);
1027 if (runqueue_node->async)
1028 g2d_free_runqueue_node(g2d, runqueue_node);
1031 mutex_unlock(&g2d->runqueue_mutex);
1034 static int g2d_check_reg_offset(struct device *dev,
1035 struct g2d_cmdlist_node *node,
1036 int nr, bool for_addr)
1038 struct g2d_cmdlist *cmdlist = node->cmdlist;
1043 for (i = 0; i < nr; i++) {
1044 struct g2d_buf_info *buf_info = &node->buf_info;
1045 struct g2d_buf_desc *buf_desc;
1046 enum g2d_reg_type reg_type;
1047 unsigned long value;
1049 index = cmdlist->last - 2 * (i + 1);
1051 reg_offset = cmdlist->data[index] & ~0xfffff000;
1052 if (reg_offset < G2D_VALID_START || reg_offset > G2D_VALID_END)
1057 switch (reg_offset) {
1058 case G2D_SRC_BASE_ADDR:
1059 case G2D_SRC_PLANE2_BASE_ADDR:
1060 case G2D_DST_BASE_ADDR:
1061 case G2D_DST_PLANE2_BASE_ADDR:
1062 case G2D_PAT_BASE_ADDR:
1063 case G2D_MSK_BASE_ADDR:
1067 reg_type = g2d_get_reg_type(reg_offset);
1069 /* check userptr buffer type. */
1070 if ((cmdlist->data[index] & ~0x7fffffff) >> 31) {
1071 buf_info->types[reg_type] = BUF_TYPE_USERPTR;
1072 cmdlist->data[index] &= ~G2D_BUF_USERPTR;
1074 buf_info->types[reg_type] = BUF_TYPE_GEM;
1076 case G2D_SRC_STRIDE:
1077 case G2D_DST_STRIDE:
1081 reg_type = g2d_get_reg_type(reg_offset);
1083 buf_desc = &buf_info->descs[reg_type];
1084 buf_desc->stride = cmdlist->data[index + 1];
1086 case G2D_SRC_COLOR_MODE:
1087 case G2D_DST_COLOR_MODE:
1091 reg_type = g2d_get_reg_type(reg_offset);
1093 buf_desc = &buf_info->descs[reg_type];
1094 value = cmdlist->data[index + 1];
1096 buf_desc->format = value & 0xf;
1098 case G2D_SRC_LEFT_TOP:
1099 case G2D_DST_LEFT_TOP:
1103 reg_type = g2d_get_reg_type(reg_offset);
1105 buf_desc = &buf_info->descs[reg_type];
1106 value = cmdlist->data[index + 1];
1108 buf_desc->left_x = value & 0x1fff;
1109 buf_desc->top_y = (value & 0x1fff0000) >> 16;
1111 case G2D_SRC_RIGHT_BOTTOM:
1112 case G2D_DST_RIGHT_BOTTOM:
1116 reg_type = g2d_get_reg_type(reg_offset);
1118 buf_desc = &buf_info->descs[reg_type];
1119 value = cmdlist->data[index + 1];
1121 buf_desc->right_x = value & 0x1fff;
1122 buf_desc->bottom_y = (value & 0x1fff0000) >> 16;
1134 dev_err(dev, "Bad register offset: 0x%lx\n", cmdlist->data[index]);
1138 /* ioctl functions */
1139 int exynos_g2d_get_ver_ioctl(struct drm_device *drm_dev, void *data,
1140 struct drm_file *file)
1142 struct drm_exynos_file_private *file_priv = file->driver_priv;
1143 struct exynos_drm_g2d_private *g2d_priv = file_priv->g2d_priv;
1145 struct g2d_data *g2d;
1146 struct drm_exynos_g2d_get_ver *ver = data;
1151 dev = g2d_priv->dev;
1155 g2d = dev_get_drvdata(dev);
1159 ver->major = G2D_HW_MAJOR_VER;
1160 ver->minor = G2D_HW_MINOR_VER;
1165 int exynos_g2d_set_cmdlist_ioctl(struct drm_device *drm_dev, void *data,
1166 struct drm_file *file)
1168 struct drm_exynos_file_private *file_priv = file->driver_priv;
1169 struct exynos_drm_g2d_private *g2d_priv = file_priv->g2d_priv;
1171 struct g2d_data *g2d;
1172 struct drm_exynos_g2d_set_cmdlist *req = data;
1173 struct drm_exynos_g2d_cmd *cmd;
1174 struct drm_exynos_pending_g2d_event *e;
1175 struct g2d_cmdlist_node *node;
1176 struct g2d_cmdlist *cmdlist;
1183 dev = g2d_priv->dev;
1187 g2d = dev_get_drvdata(dev);
1191 node = g2d_get_cmdlist(g2d);
1196 * To avoid an integer overflow for the later size computations, we
1197 * enforce a maximum number of submitted commands here. This limit is
1198 * sufficient for all conceivable usage cases of the G2D.
1200 if (req->cmd_nr > G2D_CMDLIST_DATA_NUM ||
1201 req->cmd_buf_nr > G2D_CMDLIST_DATA_NUM) {
1202 dev_err(dev, "number of submitted G2D commands exceeds limit\n");
1208 if (req->event_type != G2D_EVENT_NOT) {
1209 e = kzalloc(sizeof(*node->event), GFP_KERNEL);
1215 e->event.base.type = DRM_EXYNOS_G2D_EVENT;
1216 e->event.base.length = sizeof(e->event);
1217 e->event.user_data = req->user_data;
1219 ret = drm_event_reserve_init(drm_dev, file, &e->base, &e->event.base);
1228 cmdlist = node->cmdlist;
1233 * If don't clear SFR registers, the cmdlist is affected by register
1234 * values of previous cmdlist. G2D hw executes SFR clear command and
1235 * a next command at the same time then the next command is ignored and
1236 * is executed rightly from next next command, so needs a dummy command
1237 * to next command of SFR clear command.
1239 cmdlist->data[cmdlist->last++] = G2D_SOFT_RESET;
1240 cmdlist->data[cmdlist->last++] = G2D_SFRCLEAR;
1241 cmdlist->data[cmdlist->last++] = G2D_SRC_BASE_ADDR;
1242 cmdlist->data[cmdlist->last++] = 0;
1245 * 'LIST_HOLD' command should be set to the DMA_HOLD_CMD_REG
1246 * and GCF bit should be set to INTEN register if user wants
1247 * G2D interrupt event once current command list execution is
1249 * Otherwise only ACF bit should be set to INTEN register so
1250 * that one interrupt is occurred after all command lists
1251 * have been completed.
1254 cmdlist->data[cmdlist->last++] = G2D_INTEN;
1255 cmdlist->data[cmdlist->last++] = G2D_INTEN_ACF | G2D_INTEN_GCF;
1256 cmdlist->data[cmdlist->last++] = G2D_DMA_HOLD_CMD;
1257 cmdlist->data[cmdlist->last++] = G2D_LIST_HOLD;
1259 cmdlist->data[cmdlist->last++] = G2D_INTEN;
1260 cmdlist->data[cmdlist->last++] = G2D_INTEN_ACF;
1264 * Check the size of cmdlist. The 2 that is added last comes from
1265 * the implicit G2D_BITBLT_START that is appended once we have
1266 * checked all the submitted commands.
1268 size = cmdlist->last + req->cmd_nr * 2 + req->cmd_buf_nr * 2 + 2;
1269 if (size > G2D_CMDLIST_DATA_NUM) {
1270 dev_err(dev, "cmdlist size is too big\n");
1272 goto err_free_event;
1275 cmd = (struct drm_exynos_g2d_cmd *)(unsigned long)req->cmd;
1277 if (copy_from_user(cmdlist->data + cmdlist->last,
1279 sizeof(*cmd) * req->cmd_nr)) {
1281 goto err_free_event;
1283 cmdlist->last += req->cmd_nr * 2;
1285 ret = g2d_check_reg_offset(dev, node, req->cmd_nr, false);
1287 goto err_free_event;
1289 node->buf_info.map_nr = req->cmd_buf_nr;
1290 if (req->cmd_buf_nr) {
1291 struct drm_exynos_g2d_cmd *cmd_buf;
1293 cmd_buf = (struct drm_exynos_g2d_cmd *)
1294 (unsigned long)req->cmd_buf;
1296 if (copy_from_user(cmdlist->data + cmdlist->last,
1297 (void __user *)cmd_buf,
1298 sizeof(*cmd_buf) * req->cmd_buf_nr)) {
1300 goto err_free_event;
1302 cmdlist->last += req->cmd_buf_nr * 2;
1304 ret = g2d_check_reg_offset(dev, node, req->cmd_buf_nr, true);
1306 goto err_free_event;
1308 ret = g2d_map_cmdlist_gem(g2d, node, drm_dev, file);
1313 cmdlist->data[cmdlist->last++] = G2D_BITBLT_START;
1314 cmdlist->data[cmdlist->last++] = G2D_START_BITBLT;
1317 cmdlist->head = cmdlist->last / 2;
1320 cmdlist->data[cmdlist->last] = 0;
1322 g2d_add_cmdlist_to_inuse(g2d_priv, node);
1327 g2d_unmap_cmdlist_gem(g2d, node, file);
1330 drm_event_cancel_free(drm_dev, &node->event->base);
1332 g2d_put_cmdlist(g2d, node);
1336 int exynos_g2d_exec_ioctl(struct drm_device *drm_dev, void *data,
1337 struct drm_file *file)
1339 struct drm_exynos_file_private *file_priv = file->driver_priv;
1340 struct exynos_drm_g2d_private *g2d_priv = file_priv->g2d_priv;
1342 struct g2d_data *g2d;
1343 struct drm_exynos_g2d_exec *req = data;
1344 struct g2d_runqueue_node *runqueue_node;
1345 struct list_head *run_cmdlist;
1346 struct list_head *event_list;
1351 dev = g2d_priv->dev;
1355 g2d = dev_get_drvdata(dev);
1359 runqueue_node = kmem_cache_alloc(g2d->runqueue_slab, GFP_KERNEL);
1363 run_cmdlist = &runqueue_node->run_cmdlist;
1364 event_list = &runqueue_node->event_list;
1365 INIT_LIST_HEAD(run_cmdlist);
1366 INIT_LIST_HEAD(event_list);
1367 init_completion(&runqueue_node->complete);
1368 runqueue_node->async = req->async;
1370 list_splice_init(&g2d_priv->inuse_cmdlist, run_cmdlist);
1371 list_splice_init(&g2d_priv->event_list, event_list);
1373 if (list_empty(run_cmdlist)) {
1374 dev_err(dev, "there is no inuse cmdlist\n");
1375 kmem_cache_free(g2d->runqueue_slab, runqueue_node);
1379 mutex_lock(&g2d->runqueue_mutex);
1380 runqueue_node->pid = current->pid;
1381 runqueue_node->filp = file;
1382 list_add_tail(&runqueue_node->list, &g2d->runqueue);
1383 mutex_unlock(&g2d->runqueue_mutex);
1385 /* Let the runqueue know that there is work to do. */
1386 queue_work(g2d->g2d_workq, &g2d->runqueue_work);
1388 if (runqueue_node->async)
1391 wait_for_completion(&runqueue_node->complete);
1392 g2d_free_runqueue_node(g2d, runqueue_node);
1398 static int g2d_subdrv_probe(struct drm_device *drm_dev, struct device *dev)
1400 struct g2d_data *g2d;
1403 g2d = dev_get_drvdata(dev);
1407 /* allocate dma-aware cmdlist buffer. */
1408 ret = g2d_init_cmdlist(g2d);
1410 dev_err(dev, "cmdlist init failed\n");
1414 ret = drm_iommu_attach_device(drm_dev, dev);
1416 dev_err(dev, "failed to enable iommu.\n");
1417 g2d_fini_cmdlist(g2d);
1424 static void g2d_subdrv_remove(struct drm_device *drm_dev, struct device *dev)
1426 drm_iommu_detach_device(drm_dev, dev);
1429 static int g2d_open(struct drm_device *drm_dev, struct device *dev,
1430 struct drm_file *file)
1432 struct drm_exynos_file_private *file_priv = file->driver_priv;
1433 struct exynos_drm_g2d_private *g2d_priv;
1435 g2d_priv = kzalloc(sizeof(*g2d_priv), GFP_KERNEL);
1439 g2d_priv->dev = dev;
1440 file_priv->g2d_priv = g2d_priv;
1442 INIT_LIST_HEAD(&g2d_priv->inuse_cmdlist);
1443 INIT_LIST_HEAD(&g2d_priv->event_list);
1444 INIT_LIST_HEAD(&g2d_priv->userptr_list);
1449 static void g2d_close(struct drm_device *drm_dev, struct device *dev,
1450 struct drm_file *file)
1452 struct drm_exynos_file_private *file_priv = file->driver_priv;
1453 struct exynos_drm_g2d_private *g2d_priv = file_priv->g2d_priv;
1454 struct g2d_data *g2d;
1455 struct g2d_cmdlist_node *node, *n;
1460 g2d = dev_get_drvdata(dev);
1464 /* Remove the runqueue nodes that belong to us. */
1465 mutex_lock(&g2d->runqueue_mutex);
1466 g2d_remove_runqueue_nodes(g2d, file);
1467 mutex_unlock(&g2d->runqueue_mutex);
1470 * Wait for the runqueue worker to finish its current node.
1471 * After this the engine should no longer be accessing any
1472 * memory belonging to us.
1474 g2d_wait_finish(g2d, file);
1477 * Even after the engine is idle, there might still be stale cmdlists
1478 * (i.e. cmdlisst which we submitted but never executed) around, with
1479 * their corresponding GEM/userptr buffers.
1480 * Properly unmap these buffers here.
1482 mutex_lock(&g2d->cmdlist_mutex);
1483 list_for_each_entry_safe(node, n, &g2d_priv->inuse_cmdlist, list) {
1484 g2d_unmap_cmdlist_gem(g2d, node, file);
1485 list_move_tail(&node->list, &g2d->free_cmdlist);
1487 mutex_unlock(&g2d->cmdlist_mutex);
1489 /* release all g2d_userptr in pool. */
1490 g2d_userptr_free_all(drm_dev, g2d, file);
1492 kfree(file_priv->g2d_priv);
1495 static int g2d_probe(struct platform_device *pdev)
1497 struct device *dev = &pdev->dev;
1498 struct resource *res;
1499 struct g2d_data *g2d;
1500 struct exynos_drm_subdrv *subdrv;
1503 g2d = devm_kzalloc(dev, sizeof(*g2d), GFP_KERNEL);
1507 g2d->runqueue_slab = kmem_cache_create("g2d_runqueue_slab",
1508 sizeof(struct g2d_runqueue_node), 0, 0, NULL);
1509 if (!g2d->runqueue_slab)
1514 g2d->g2d_workq = create_singlethread_workqueue("g2d");
1515 if (!g2d->g2d_workq) {
1516 dev_err(dev, "failed to create workqueue\n");
1518 goto err_destroy_slab;
1521 INIT_WORK(&g2d->runqueue_work, g2d_runqueue_worker);
1522 INIT_LIST_HEAD(&g2d->free_cmdlist);
1523 INIT_LIST_HEAD(&g2d->runqueue);
1525 mutex_init(&g2d->cmdlist_mutex);
1526 mutex_init(&g2d->runqueue_mutex);
1528 g2d->gate_clk = devm_clk_get(dev, "fimg2d");
1529 if (IS_ERR(g2d->gate_clk)) {
1530 dev_err(dev, "failed to get gate clock\n");
1531 ret = PTR_ERR(g2d->gate_clk);
1532 goto err_destroy_workqueue;
1535 pm_runtime_use_autosuspend(dev);
1536 pm_runtime_set_autosuspend_delay(dev, 2000);
1537 pm_runtime_enable(dev);
1538 clear_bit(G2D_BIT_SUSPEND_RUNQUEUE, &g2d->flags);
1539 clear_bit(G2D_BIT_ENGINE_BUSY, &g2d->flags);
1541 res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
1543 g2d->regs = devm_ioremap_resource(dev, res);
1544 if (IS_ERR(g2d->regs)) {
1545 ret = PTR_ERR(g2d->regs);
1549 g2d->irq = platform_get_irq(pdev, 0);
1551 dev_err(dev, "failed to get irq\n");
1556 ret = devm_request_irq(dev, g2d->irq, g2d_irq_handler, 0,
1559 dev_err(dev, "irq request failed\n");
1563 g2d->max_pool = MAX_POOL;
1565 platform_set_drvdata(pdev, g2d);
1567 subdrv = &g2d->subdrv;
1569 subdrv->probe = g2d_subdrv_probe;
1570 subdrv->remove = g2d_subdrv_remove;
1571 subdrv->open = g2d_open;
1572 subdrv->close = g2d_close;
1574 ret = exynos_drm_subdrv_register(subdrv);
1576 dev_err(dev, "failed to register drm g2d device\n");
1580 dev_info(dev, "The Exynos G2D (ver %d.%d) successfully probed.\n",
1581 G2D_HW_MAJOR_VER, G2D_HW_MINOR_VER);
1586 pm_runtime_disable(dev);
1587 err_destroy_workqueue:
1588 destroy_workqueue(g2d->g2d_workq);
1590 kmem_cache_destroy(g2d->runqueue_slab);
1594 static int g2d_remove(struct platform_device *pdev)
1596 struct g2d_data *g2d = platform_get_drvdata(pdev);
1598 /* Suspend operation and wait for engine idle. */
1599 set_bit(G2D_BIT_SUSPEND_RUNQUEUE, &g2d->flags);
1600 g2d_wait_finish(g2d, NULL);
1602 cancel_work_sync(&g2d->runqueue_work);
1603 exynos_drm_subdrv_unregister(&g2d->subdrv);
1605 /* There should be no locking needed here. */
1606 g2d_remove_runqueue_nodes(g2d, NULL);
1608 pm_runtime_dont_use_autosuspend(&pdev->dev);
1609 pm_runtime_disable(&pdev->dev);
1611 g2d_fini_cmdlist(g2d);
1612 destroy_workqueue(g2d->g2d_workq);
1613 kmem_cache_destroy(g2d->runqueue_slab);
1618 #ifdef CONFIG_PM_SLEEP
1619 static int g2d_suspend(struct device *dev)
1621 struct g2d_data *g2d = dev_get_drvdata(dev);
1624 * Suspend the runqueue worker operation and wait until the G2D
1627 set_bit(G2D_BIT_SUSPEND_RUNQUEUE, &g2d->flags);
1628 g2d_wait_finish(g2d, NULL);
1629 flush_work(&g2d->runqueue_work);
1634 static int g2d_resume(struct device *dev)
1636 struct g2d_data *g2d = dev_get_drvdata(dev);
1638 clear_bit(G2D_BIT_SUSPEND_RUNQUEUE, &g2d->flags);
1639 queue_work(g2d->g2d_workq, &g2d->runqueue_work);
1646 static int g2d_runtime_suspend(struct device *dev)
1648 struct g2d_data *g2d = dev_get_drvdata(dev);
1650 clk_disable_unprepare(g2d->gate_clk);
1655 static int g2d_runtime_resume(struct device *dev)
1657 struct g2d_data *g2d = dev_get_drvdata(dev);
1660 ret = clk_prepare_enable(g2d->gate_clk);
1662 dev_warn(dev, "failed to enable clock.\n");
1668 static const struct dev_pm_ops g2d_pm_ops = {
1669 SET_SYSTEM_SLEEP_PM_OPS(g2d_suspend, g2d_resume)
1670 SET_RUNTIME_PM_OPS(g2d_runtime_suspend, g2d_runtime_resume, NULL)
1673 static const struct of_device_id exynos_g2d_match[] = {
1674 { .compatible = "samsung,exynos5250-g2d" },
1675 { .compatible = "samsung,exynos4212-g2d" },
1678 MODULE_DEVICE_TABLE(of, exynos_g2d_match);
1680 struct platform_driver g2d_driver = {
1682 .remove = g2d_remove,
1684 .name = "exynos-drm-g2d",
1685 .owner = THIS_MODULE,
1687 .of_match_table = exynos_g2d_match,